From a94dd00f2e1c20deacffadaaa6eebf73b217c907 Mon Sep 17 00:00:00 2001
From: Rudolf Marek <r.marek@assembler.cz>
Date: Sun, 14 Jul 2013 23:17:26 +0200
Subject: i2c: piix4: Add support for secondary SMBus on AMD SB800 and AMD FCH
 chipsets

Add support for the secondary SMBus controller on the AMD SB800 and AMD FCH
chipsets.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Tested-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 Documentation/i2c/busses/i2c-piix4 | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'Documentation')

diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
index a370b2047cf3..c097e0f020fe 100644
--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -73,9 +73,10 @@ this driver on those mainboards.
 The ServerWorks Southbridges, the Intel 440MX, and the Victory66 are
 identical to the PIIX4 in I2C/SMBus support.
 
-The AMD SB700 and SP5100 chipsets implement two PIIX4-compatible SMBus
-controllers. If your BIOS initializes the secondary controller, it will
-be detected by this driver as an "Auxiliary SMBus Host Controller".
+The AMD SB700, SB800, SP5100 and Hudson-2 chipsets implement two
+PIIX4-compatible SMBus controllers. If your BIOS initializes the
+secondary controller, it will be detected by this driver as
+an "Auxiliary SMBus Host Controller".
 
 If you own Force CPCI735 motherboard or other OSB4 based systems you may need
 to change the SMBus Interrupt Select register so the SMBus controller uses
-- 
cgit v1.2.3


From 42fa278d70e7caee728f6f3e563d1aaaf9c521aa Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Thu, 8 Aug 2013 10:55:11 +0530
Subject: Documentation: i2c: Fix example in instantiating-devices

__initdata should be placed between the variable name and equal
sign for the variable to be placed in the intended section.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 Documentation/i2c/instantiating-devices | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'Documentation')

diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
index 22182660dda7..c70e7a7638d1 100644
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -19,7 +19,7 @@ i2c_board_info which is registered by calling i2c_register_board_info().
 
 Example (from omap2 h4):
 
-static struct i2c_board_info __initdata h4_i2c_board_info[] = {
+static struct i2c_board_info h4_i2c_board_info[] __initdata = {
 	{
 		I2C_BOARD_INFO("isp1301_omap", 0x2d),
 		.irq		= OMAP_GPIO_IRQ(125),
-- 
cgit v1.2.3


From 930ab3d403ae43f19d7e6d972139e02c9b8a5ec6 Mon Sep 17 00:00:00 2001
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Thu, 22 Aug 2013 16:19:05 +0200
Subject: i2c: mv64xxx: Add I2C Transaction Generator support

The I2C Transaction Generator offloads CPU from managing I2C
transfer step by step.

This feature is currently only available on Armada XP, so usage of
this mechanism is activated through device tree.

Based on the work of Piotr Ziecik and rewrote to use the new way of
handling multiples i2c messages.

Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 .../devicetree/bindings/i2c/i2c-mv64xxx.txt        |  10 ++
 drivers/i2c/busses/i2c-mv64xxx.c                   | 193 +++++++++++++++++++--
 2 files changed, 192 insertions(+), 11 deletions(-)

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
index 6113f9275f42..73cdc03cc2bf 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
@@ -5,6 +5,7 @@ Required properties :
 
  - reg             : Offset and length of the register set for the device
  - compatible      : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c"
+                     or "marvell,mv7230-i2c"
  - interrupts      : The interrupt number
 
 Optional properties :
@@ -20,3 +21,12 @@ Examples:
 		interrupts = <29>;
 		clock-frequency = <100000>;
 	};
+
+For the Armada XP:
+
+	i2c@11000 {
+		compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+		reg = <0x11000 0x100>;
+		interrupts = <29>;
+		clock-frequency = <100000>;
+	};
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 9cc361d19941..2404c4e0f35c 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -55,6 +55,32 @@
 #define	MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK	0xe8
 #define	MV64XXX_I2C_STATUS_NO_STATUS			0xf8
 
+/* Register defines (I2C bridge) */
+#define	MV64XXX_I2C_REG_TX_DATA_LO			0xc0
+#define	MV64XXX_I2C_REG_TX_DATA_HI			0xc4
+#define	MV64XXX_I2C_REG_RX_DATA_LO			0xc8
+#define	MV64XXX_I2C_REG_RX_DATA_HI			0xcc
+#define	MV64XXX_I2C_REG_BRIDGE_CONTROL			0xd0
+#define	MV64XXX_I2C_REG_BRIDGE_STATUS			0xd4
+#define	MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE		0xd8
+#define	MV64XXX_I2C_REG_BRIDGE_INTR_MASK		0xdC
+#define	MV64XXX_I2C_REG_BRIDGE_TIMING			0xe0
+
+/* Bridge Control values */
+#define	MV64XXX_I2C_BRIDGE_CONTROL_WR			0x00000001
+#define	MV64XXX_I2C_BRIDGE_CONTROL_RD			0x00000002
+#define	MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT		2
+#define	MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT		0x00001000
+#define	MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT	13
+#define	MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT	16
+#define	MV64XXX_I2C_BRIDGE_CONTROL_ENABLE		0x00080000
+
+/* Bridge Status values */
+#define	MV64XXX_I2C_BRIDGE_STATUS_ERROR			0x00000001
+#define	MV64XXX_I2C_STATUS_OFFLOAD_ERROR		0xf0000001
+#define	MV64XXX_I2C_STATUS_OFFLOAD_OK			0xf0000000
+
+
 /* Driver states */
 enum {
 	MV64XXX_I2C_STATE_INVALID,
@@ -71,14 +97,17 @@ enum {
 enum {
 	MV64XXX_I2C_ACTION_INVALID,
 	MV64XXX_I2C_ACTION_CONTINUE,
+	MV64XXX_I2C_ACTION_OFFLOAD_SEND_START,
 	MV64XXX_I2C_ACTION_SEND_START,
 	MV64XXX_I2C_ACTION_SEND_RESTART,
+	MV64XXX_I2C_ACTION_OFFLOAD_RESTART,
 	MV64XXX_I2C_ACTION_SEND_ADDR_1,
 	MV64XXX_I2C_ACTION_SEND_ADDR_2,
 	MV64XXX_I2C_ACTION_SEND_DATA,
 	MV64XXX_I2C_ACTION_RCV_DATA,
 	MV64XXX_I2C_ACTION_RCV_DATA_STOP,
 	MV64XXX_I2C_ACTION_SEND_STOP,
+	MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP,
 };
 
 struct mv64xxx_i2c_regs {
@@ -117,6 +146,7 @@ struct mv64xxx_i2c_data {
 	spinlock_t		lock;
 	struct i2c_msg		*msg;
 	struct i2c_adapter	adapter;
+	bool			offload_enabled;
 };
 
 static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = {
@@ -165,6 +195,77 @@ mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
 	}
 }
 
+static int mv64xxx_i2c_offload_msg(struct mv64xxx_i2c_data *drv_data)
+{
+	unsigned long data_reg_hi = 0;
+	unsigned long data_reg_lo = 0;
+	unsigned long ctrl_reg;
+	struct i2c_msg *msg = drv_data->msgs;
+
+	drv_data->msg = msg;
+	drv_data->byte_posn = 0;
+	drv_data->bytes_left = msg->len;
+	drv_data->aborting = 0;
+	drv_data->rc = 0;
+	/* Only regular transactions can be offloaded */
+	if ((msg->flags & ~(I2C_M_TEN | I2C_M_RD)) != 0)
+		return -EINVAL;
+
+	/* Only 1-8 byte transfers can be offloaded */
+	if (msg->len < 1 || msg->len > 8)
+		return -EINVAL;
+
+	/* Build transaction */
+	ctrl_reg = MV64XXX_I2C_BRIDGE_CONTROL_ENABLE |
+		   (msg->addr << MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT);
+
+	if ((msg->flags & I2C_M_TEN) != 0)
+		ctrl_reg |=  MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT;
+
+	if ((msg->flags & I2C_M_RD) == 0) {
+		u8 local_buf[8] = { 0 };
+
+		memcpy(local_buf, msg->buf, msg->len);
+		data_reg_lo = cpu_to_le32(*((u32 *)local_buf));
+		data_reg_hi = cpu_to_le32(*((u32 *)(local_buf+4)));
+
+		ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_WR |
+		    (msg->len - 1) << MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT;
+
+		writel_relaxed(data_reg_lo,
+			drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_LO);
+		writel_relaxed(data_reg_hi,
+			drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_HI);
+
+	} else {
+		ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_RD |
+		    (msg->len - 1) << MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT;
+	}
+
+	/* Execute transaction */
+	writel(ctrl_reg, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
+
+	return 0;
+}
+
+static void
+mv64xxx_i2c_update_offload_data(struct mv64xxx_i2c_data *drv_data)
+{
+	struct i2c_msg *msg = drv_data->msg;
+
+	if (msg->flags & I2C_M_RD) {
+		u32 data_reg_lo = readl(drv_data->reg_base +
+				MV64XXX_I2C_REG_RX_DATA_LO);
+		u32 data_reg_hi = readl(drv_data->reg_base +
+				MV64XXX_I2C_REG_RX_DATA_HI);
+		u8 local_buf[8] = { 0 };
+
+		*((u32 *)local_buf) = le32_to_cpu(data_reg_lo);
+		*((u32 *)(local_buf+4)) = le32_to_cpu(data_reg_hi);
+		memcpy(msg->buf, local_buf, msg->len);
+	}
+
+}
 /*
  *****************************************************************************
  *
@@ -177,6 +278,15 @@ mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
 static void
 mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data)
 {
+	if (drv_data->offload_enabled) {
+		writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
+		writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_TIMING);
+		writel(0, drv_data->reg_base +
+			MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
+		writel(0, drv_data->reg_base +
+			MV64XXX_I2C_REG_BRIDGE_INTR_MASK);
+	}
+
 	writel(0, drv_data->reg_base + drv_data->reg_offsets.soft_reset);
 	writel(MV64XXX_I2C_BAUD_DIV_M(drv_data->freq_m) | MV64XXX_I2C_BAUD_DIV_N(drv_data->freq_n),
 		drv_data->reg_base + drv_data->reg_offsets.clock);
@@ -283,6 +393,16 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
 		drv_data->rc = -ENXIO;
 		break;
 
+	case MV64XXX_I2C_STATUS_OFFLOAD_OK:
+		if (drv_data->send_stop || drv_data->aborting) {
+			drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP;
+			drv_data->state = MV64XXX_I2C_STATE_IDLE;
+		} else {
+			drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_RESTART;
+			drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_RESTART;
+		}
+		break;
+
 	default:
 		dev_err(&drv_data->adapter.dev,
 			"mv64xxx_i2c_fsm: Ctlr Error -- state: 0x%x, "
@@ -299,20 +419,27 @@ static void
 mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
 {
 	switch(drv_data->action) {
+	case MV64XXX_I2C_ACTION_OFFLOAD_RESTART:
+		mv64xxx_i2c_update_offload_data(drv_data);
+		writel(0, drv_data->reg_base +	MV64XXX_I2C_REG_BRIDGE_CONTROL);
+		writel(0, drv_data->reg_base +
+			MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
+		/* FALLTHRU */
 	case MV64XXX_I2C_ACTION_SEND_RESTART:
 		/* We should only get here if we have further messages */
 		BUG_ON(drv_data->num_msgs == 0);
 
-		drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_START;
-		writel(drv_data->cntl_bits,
-			drv_data->reg_base + drv_data->reg_offsets.control);
-
 		drv_data->msgs++;
 		drv_data->num_msgs--;
+		if (!(drv_data->offload_enabled &&
+				mv64xxx_i2c_offload_msg(drv_data))) {
+			drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_START;
+			writel(drv_data->cntl_bits,
+			drv_data->reg_base + drv_data->reg_offsets.control);
 
-		/* Setup for the next message */
-		mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
-
+			/* Setup for the next message */
+			mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
+		}
 		/*
 		 * We're never at the start of the message here, and by this
 		 * time it's already too late to do any protocol mangling.
@@ -326,6 +453,12 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
 			drv_data->reg_base + drv_data->reg_offsets.control);
 		break;
 
+	case MV64XXX_I2C_ACTION_OFFLOAD_SEND_START:
+		if (!mv64xxx_i2c_offload_msg(drv_data))
+			break;
+		else
+			drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
+		/* FALLTHRU */
 	case MV64XXX_I2C_ACTION_SEND_START:
 		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
 			drv_data->reg_base + drv_data->reg_offsets.control);
@@ -375,6 +508,7 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
 			"mv64xxx_i2c_do_action: Invalid action: %d\n",
 			drv_data->action);
 		drv_data->rc = -EIO;
+
 		/* FALLTHRU */
 	case MV64XXX_I2C_ACTION_SEND_STOP:
 		drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
@@ -383,6 +517,15 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
 		drv_data->block = 0;
 		wake_up(&drv_data->waitq);
 		break;
+
+	case MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP:
+		mv64xxx_i2c_update_offload_data(drv_data);
+		writel(0, drv_data->reg_base +	MV64XXX_I2C_REG_BRIDGE_CONTROL);
+		writel(0, drv_data->reg_base +
+			MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
+		drv_data->block = 0;
+		wake_up(&drv_data->waitq);
+		break;
 	}
 }
 
@@ -395,6 +538,21 @@ mv64xxx_i2c_intr(int irq, void *dev_id)
 	irqreturn_t	rc = IRQ_NONE;
 
 	spin_lock_irqsave(&drv_data->lock, flags);
+
+	if (drv_data->offload_enabled) {
+		while (readl(drv_data->reg_base +
+				MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE)) {
+			int reg_status = readl(drv_data->reg_base +
+					MV64XXX_I2C_REG_BRIDGE_STATUS);
+			if (reg_status & MV64XXX_I2C_BRIDGE_STATUS_ERROR)
+				status = MV64XXX_I2C_STATUS_OFFLOAD_ERROR;
+			else
+				status = MV64XXX_I2C_STATUS_OFFLOAD_OK;
+			mv64xxx_i2c_fsm(drv_data, status);
+			mv64xxx_i2c_do_action(drv_data);
+			rc = IRQ_HANDLED;
+		}
+	}
 	while (readl(drv_data->reg_base + drv_data->reg_offsets.control) &
 						MV64XXX_I2C_REG_CONTROL_IFLG) {
 		status = readl(drv_data->reg_base + drv_data->reg_offsets.status);
@@ -459,11 +617,15 @@ mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg,
 	unsigned long	flags;
 
 	spin_lock_irqsave(&drv_data->lock, flags);
-	mv64xxx_i2c_prepare_for_io(drv_data, msg);
-
-	drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
-	drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
+	if (drv_data->offload_enabled) {
+		drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_SEND_START;
+		drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
+	} else {
+		mv64xxx_i2c_prepare_for_io(drv_data, msg);
 
+		drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
+		drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
+	}
 	drv_data->send_stop = is_last;
 	drv_data->block = 1;
 	mv64xxx_i2c_do_action(drv_data);
@@ -521,6 +683,7 @@ static const struct i2c_algorithm mv64xxx_i2c_algo = {
 static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
 	{ .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i},
 	{ .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
+	{ .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
 	{}
 };
 MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
@@ -601,6 +764,13 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 
 	memcpy(&drv_data->reg_offsets, device->data, sizeof(drv_data->reg_offsets));
 
+	/*
+	 * For controllers embedded in new SoCs activate the
+	 * Transaction Generator support.
+	 */
+	if (of_device_is_compatible(np, "marvell,mv78230-i2c"))
+		drv_data->offload_enabled = true;
+
 out:
 	return rc;
 #endif
@@ -654,6 +824,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 		drv_data->freq_n = pdata->freq_n;
 		drv_data->irq = platform_get_irq(pd, 0);
 		drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
+		drv_data->offload_enabled = false;
 		memcpy(&drv_data->reg_offsets, &mv64xxx_i2c_regs_mv64xxx, sizeof(drv_data->reg_offsets));
 	} else if (pd->dev.of_node) {
 		rc = mv64xxx_of_config(drv_data, &pd->dev);
-- 
cgit v1.2.3


From 687b81d083c082bc1e853032e3a2a54f8c251d27 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <wsa@the-dreams.de>
Date: Thu, 11 Jul 2013 12:56:15 +0100
Subject: i2c: move OF helpers into the core

I2C of helpers used to live in of_i2c.c but experience (from SPI) shows
that it is much cleaner to have this in the core. This also removes a
circular dependency between the helpers and the core, and so we can
finally register child nodes in the core instead of doing this manually
in each driver. So, fix the drivers and documentation, too.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 Documentation/acpi/enumeration.txt              |   1 -
 arch/powerpc/platforms/44x/warp.c               |   1 -
 drivers/gpu/drm/tilcdc/tilcdc_slave.c           |   1 -
 drivers/gpu/drm/tilcdc/tilcdc_tfp410.c          |   1 -
 drivers/gpu/host1x/drm/output.c                 |   2 +-
 drivers/i2c/busses/i2c-at91.c                   |   3 -
 drivers/i2c/busses/i2c-cpm.c                    |   6 --
 drivers/i2c/busses/i2c-davinci.c                |   2 -
 drivers/i2c/busses/i2c-designware-platdrv.c     |   2 -
 drivers/i2c/busses/i2c-gpio.c                   |   3 -
 drivers/i2c/busses/i2c-i801.c                   |   2 -
 drivers/i2c/busses/i2c-ibm_iic.c                |   4 -
 drivers/i2c/busses/i2c-imx.c                    |   3 -
 drivers/i2c/busses/i2c-mpc.c                    |   2 -
 drivers/i2c/busses/i2c-mv64xxx.c                |   3 -
 drivers/i2c/busses/i2c-mxs.c                    |   3 -
 drivers/i2c/busses/i2c-nomadik.c                |   3 -
 drivers/i2c/busses/i2c-ocores.c                 |   3 -
 drivers/i2c/busses/i2c-octeon.c                 |   3 -
 drivers/i2c/busses/i2c-omap.c                   |   3 -
 drivers/i2c/busses/i2c-pnx.c                    |   3 -
 drivers/i2c/busses/i2c-powermac.c               |   9 +-
 drivers/i2c/busses/i2c-pxa.c                    |   2 -
 drivers/i2c/busses/i2c-s3c2410.c                |   2 -
 drivers/i2c/busses/i2c-sh_mobile.c              |   2 -
 drivers/i2c/busses/i2c-sirf.c                   |   3 -
 drivers/i2c/busses/i2c-stu300.c                 |   2 -
 drivers/i2c/busses/i2c-tegra.c                  |   3 -
 drivers/i2c/busses/i2c-versatile.c              |   2 -
 drivers/i2c/busses/i2c-wmt.c                    |   3 -
 drivers/i2c/busses/i2c-xiic.c                   |   3 -
 drivers/i2c/i2c-core.c                          | 109 +++++++++++++++++++++-
 drivers/i2c/i2c-mux.c                           |   3 -
 drivers/i2c/muxes/i2c-arb-gpio-challenge.c      |   1 -
 drivers/i2c/muxes/i2c-mux-gpio.c                |   1 -
 drivers/i2c/muxes/i2c-mux-pinctrl.c             |   1 -
 drivers/media/platform/exynos4-is/fimc-is-i2c.c |   4 +-
 drivers/media/platform/exynos4-is/fimc-is.c     |   2 +-
 drivers/media/platform/exynos4-is/media-dev.c   |   1 -
 drivers/of/Kconfig                              |   6 --
 drivers/of/Makefile                             |   1 -
 drivers/of/of_i2c.c                             | 114 ------------------------
 drivers/staging/imx-drm/imx-tve.c               |   2 +-
 include/linux/i2c.h                             |  20 +++++
 include/linux/of_i2c.h                          |  46 ----------
 sound/soc/fsl/imx-sgtl5000.c                    |   2 +-
 sound/soc/fsl/imx-wm8962.c                      |   2 +-
 47 files changed, 138 insertions(+), 262 deletions(-)
 delete mode 100644 drivers/of/of_i2c.c
 delete mode 100644 include/linux/of_i2c.h

(limited to 'Documentation')

diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
index d9be7a97dff3..958266efcc20 100644
--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@@ -238,7 +238,6 @@ An I2C bus (controller) driver does:
 	if (ret)
 		/* handle error */
 
-	of_i2c_register_devices(adapter);
 	/* Enumerate the slave devices behind this bus via ACPI */
 	acpi_i2c_register_devices(adapter);
 
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 4cfa49901c02..534574a97ec9 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -16,7 +16,6 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/of_gpio.h>
-#include <linux/of_i2c.h>
 #include <linux/slab.h>
 #include <linux/export.h>
 
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_slave.c b/drivers/gpu/drm/tilcdc/tilcdc_slave.c
index dfffaf014022..a19f657dfa59 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_slave.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_slave.c
@@ -16,7 +16,6 @@
  */
 
 #include <linux/i2c.h>
-#include <linux/of_i2c.h>
 #include <linux/pinctrl/pinmux.h>
 #include <linux/pinctrl/consumer.h>
 #include <drm/drm_encoder_slave.h>
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
index 925c7cddeff9..c38b56b268ac 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
@@ -16,7 +16,6 @@
  */
 
 #include <linux/i2c.h>
-#include <linux/of_i2c.h>
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
 #include <linux/pinctrl/pinmux.h>
diff --git a/drivers/gpu/host1x/drm/output.c b/drivers/gpu/host1x/drm/output.c
index 8140fc6c34d8..137ae81ab80e 100644
--- a/drivers/gpu/host1x/drm/output.c
+++ b/drivers/gpu/host1x/drm/output.c
@@ -9,7 +9,7 @@
 
 #include <linux/module.h>
 #include <linux/of_gpio.h>
-#include <linux/of_i2c.h>
+#include <linux/i2c.h>
 
 #include "drm.h"
 
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 6bb839b688be..fd059308affa 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -28,7 +28,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_i2c.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/platform_data/dma-atmel.h>
@@ -775,8 +774,6 @@ static int at91_twi_probe(struct platform_device *pdev)
 		return rc;
 	}
 
-	of_i2c_register_devices(&dev->adapter);
-
 	dev_info(dev->dev, "AT91 i2c bus driver.\n");
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 2e1f7eb55bf4..b2b8aa9adc0e 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -42,7 +42,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
-#include <linux/of_i2c.h>
 #include <sysdev/fsl_soc.h>
 #include <asm/cpm.h>
 
@@ -681,11 +680,6 @@ static int cpm_i2c_probe(struct platform_device *ofdev)
 	dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
 		cpm->adap.name);
 
-	/*
-	 * register OF I2C devices
-	 */
-	of_i2c_register_devices(&cpm->adap);
-
 	return 0;
 out_shut:
 	cpm_i2c_shutdown(cpm);
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index cf90bfff9676..57473415be10 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -38,7 +38,6 @@
 #include <linux/slab.h>
 #include <linux/cpufreq.h>
 #include <linux/gpio.h>
-#include <linux/of_i2c.h>
 #include <linux/of_device.h>
 #include <linux/platform_data/i2c-davinci.h>
 
@@ -726,7 +725,6 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failure adding adapter\n");
 		goto err_unuse_clocks;
 	}
-	of_i2c_register_devices(adap);
 
 	return 0;
 
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 64ffb908641c..ded77c3bd59c 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -35,7 +35,6 @@
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/of.h>
-#include <linux/of_i2c.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
@@ -172,7 +171,6 @@ static int dw_i2c_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failure adding adapter\n");
 		return r;
 	}
-	of_i2c_register_devices(adap);
 	acpi_i2c_register_devices(adap);
 
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index 8cdb4f743e19..bfa02c6c2dda 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -16,7 +16,6 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
-#include <linux/of_i2c.h>
 
 struct i2c_gpio_private_data {
 	struct i2c_adapter adap;
@@ -224,8 +223,6 @@ static int i2c_gpio_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_add_bus;
 
-	of_i2c_register_devices(adap);
-
 	platform_set_drvdata(pdev, priv);
 
 	dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n",
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 4ebceed6bc66..4296d1721272 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -87,7 +87,6 @@
 #include <linux/slab.h>
 #include <linux/wait.h>
 #include <linux/err.h>
-#include <linux/of_i2c.h>
 
 #if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
 		defined CONFIG_DMI
@@ -1230,7 +1229,6 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		goto exit_free_irq;
 	}
 
-	of_i2c_register_devices(&priv->adapter);
 	i801_probe_optional_slaves(priv);
 	/* We ignore errors - multiplexing is optional */
 	i801_add_mux(priv);
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 973f51688276..ff3caa0c28cd 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -42,7 +42,6 @@
 #include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/of_platform.h>
-#include <linux/of_i2c.h>
 
 #include "i2c-ibm_iic.h"
 
@@ -759,9 +758,6 @@ static int iic_probe(struct platform_device *ofdev)
 	dev_info(&ofdev->dev, "using %s mode\n",
 		 dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
 
-	/* Now register all the child nodes */
-	of_i2c_register_devices(adap);
-
 	return 0;
 
 error_cleanup:
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index a231d2fd91ce..ccf46656bdad 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -52,7 +52,6 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_i2c.h>
 #include <linux/platform_data/i2c-imx.h>
 
 /** Defines ********************************************************************
@@ -682,8 +681,6 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	of_i2c_register_devices(&i2c_imx->adapter);
-
 	/* Set up platform driver data */
 	platform_set_drvdata(pdev, i2c_imx);
 	clk_disable_unprepare(i2c_imx->clk);
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index ffac2145b94a..f4060939e959 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -18,7 +18,6 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/of_platform.h>
-#include <linux/of_i2c.h>
 #include <linux/slab.h>
 
 #include <linux/io.h>
@@ -694,7 +693,6 @@ static int fsl_i2c_probe(struct platform_device *op)
 		dev_err(i2c->dev, "failed to add adapter\n");
 		goto fail_add;
 	}
-	of_i2c_register_devices(&i2c->adap);
 
 	return result;
 
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index bc60f9ac7c04..7f3a47443494 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -21,7 +21,6 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
-#include <linux/of_i2c.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/delay.h>
@@ -871,8 +870,6 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 		goto exit_free_irq;
 	}
 
-	of_i2c_register_devices(&drv_data->adapter);
-
 	return 0;
 
 exit_free_irq:
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 46cda0b02fd1..f4a01675fa71 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -27,7 +27,6 @@
 #include <linux/stmp_device.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_i2c.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
 
@@ -752,8 +751,6 @@ static int mxs_i2c_probe(struct platform_device *pdev)
 		return err;
 	}
 
-	of_i2c_register_devices(adap);
-
 	return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 1909e8073541..8bf9ac01301a 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -24,7 +24,6 @@
 #include <linux/pm_runtime.h>
 #include <linux/platform_data/i2c-nomadik.h>
 #include <linux/of.h>
-#include <linux/of_i2c.h>
 #include <linux/pinctrl/consumer.h>
 
 #define DRIVER_NAME "nmk-i2c"
@@ -1045,8 +1044,6 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 		goto err_add_adap;
 	}
 
-	of_i2c_register_devices(adap);
-
 	pm_runtime_put(&adev->dev);
 
 	return 0;
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index e14182cd87ff..c61f37a10a07 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -24,7 +24,6 @@
 #include <linux/i2c-ocores.h>
 #include <linux/slab.h>
 #include <linux/io.h>
-#include <linux/of_i2c.h>
 #include <linux/log2.h>
 
 struct ocores_i2c {
@@ -432,8 +431,6 @@ static int ocores_i2c_probe(struct platform_device *pdev)
 	if (pdata) {
 		for (i = 0; i < pdata->num_devices; i++)
 			i2c_new_device(&i2c->adap, pdata->devices + i);
-	} else {
-		of_i2c_register_devices(&i2c->adap);
 	}
 
 	return 0;
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index 956fe320f313..b929ba271b47 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -15,7 +15,6 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/of_i2c.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
@@ -599,8 +598,6 @@ static int octeon_i2c_probe(struct platform_device *pdev)
 	}
 	dev_info(i2c->dev, "version %s\n", DRV_VERSION);
 
-	of_i2c_register_devices(&i2c->adap);
-
 	return 0;
 
 out:
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 9ccb7b9cb6fc..6d8308d5dc4e 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -38,7 +38,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <linux/of_i2c.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
 #include <linux/i2c-omap.h>
@@ -1231,8 +1230,6 @@ omap_i2c_probe(struct platform_device *pdev)
 	dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr,
 		 major, minor, dev->speed);
 
-	of_i2c_register_devices(adap);
-
 	pm_runtime_mark_last_busy(dev->dev);
 	pm_runtime_put_autosuspend(dev->dev);
 
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 1713b3ee61f5..d09577a05d00 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -23,7 +23,6 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/slab.h>
-#include <linux/of_i2c.h>
 
 #define I2C_PNX_TIMEOUT_DEFAULT		10 /* msec */
 #define I2C_PNX_SPEED_KHZ_DEFAULT	100
@@ -741,8 +740,6 @@ static int i2c_pnx_probe(struct platform_device *pdev)
 		goto out_irq;
 	}
 
-	of_i2c_register_devices(&alg_data->adapter);
-
 	dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
 		alg_data->adapter.name, res->start, alg_data->irq);
 
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 06858d576552..37e8cfad625b 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -440,7 +440,9 @@ static int i2c_powermac_probe(struct platform_device *dev)
 	adapter->algo = &i2c_powermac_algorithm;
 	i2c_set_adapdata(adapter, bus);
 	adapter->dev.parent = &dev->dev;
-	adapter->dev.of_node = dev->dev.of_node;
+
+	/* Clear of_node to skip automatic registration of i2c child nodes */
+	adapter->dev.of_node = NULL;
 	rc = i2c_add_adapter(adapter);
 	if (rc) {
 		printk(KERN_ERR "i2c-powermac: Adapter %s registration "
@@ -451,9 +453,8 @@ static int i2c_powermac_probe(struct platform_device *dev)
 
 	printk(KERN_INFO "PowerMac i2c bus %s registered\n", adapter->name);
 
-	/* Cannot use of_i2c_register_devices() due to Apple device-tree
-	 * funkyness
-	 */
+	/* Use custom child registration due to Apple device-tree funkyness */
+	adapter->dev.of_node = dev->dev.of_node;
 	i2c_powermac_register_devices(adapter, bus);
 
 	return 0;
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 3dbc1acdc28a..bbe6dfbc5c05 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -31,7 +31,6 @@
 #include <linux/i2c-pxa.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_i2c.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
 #include <linux/clk.h>
@@ -1247,7 +1246,6 @@ static int i2c_pxa_probe(struct platform_device *dev)
 		printk(KERN_INFO "I2C: Failed to add bus\n");
 		goto eadapt;
 	}
-	of_i2c_register_devices(&i2c->adap);
 
 	platform_set_drvdata(dev, i2c);
 
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 0a077b1ef94f..3535f3c0f7b4 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -36,7 +36,6 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 #include <linux/io.h>
-#include <linux/of_i2c.h>
 #include <linux/of_gpio.h>
 #include <linux/pinctrl/consumer.h>
 
@@ -1154,7 +1153,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	of_i2c_register_devices(&i2c->adap);
 	platform_set_drvdata(pdev, i2c);
 
 	pm_runtime_enable(&pdev->dev);
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 4e86a3190d46..55110ddbed1f 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -27,7 +27,6 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
-#include <linux/of_i2c.h>
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
 #include <linux/clk.h>
@@ -758,7 +757,6 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 		 "I2C adapter %d with bus speed %lu Hz (L/H=%x/%x)\n",
 		 adap->nr, pd->bus_speed, pd->iccl, pd->icch);
 
-	of_i2c_register_devices(adap);
 	return 0;
 
  err_all:
diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c
index a63c7d506836..0ff22e29e7df 100644
--- a/drivers/i2c/busses/i2c-sirf.c
+++ b/drivers/i2c/busses/i2c-sirf.c
@@ -12,7 +12,6 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/of_i2c.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
@@ -366,8 +365,6 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
 
 	clk_disable(clk);
 
-	of_i2c_register_devices(adap);
-
 	dev_info(&pdev->dev, " I2C adapter ready to operate\n");
 
 	return 0;
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 19a40afaf172..f8f6f2e552db 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -17,7 +17,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/slab.h>
-#include <linux/of_i2c.h>
 
 /* the name of this kernel module */
 #define NAME "stu300"
@@ -933,7 +932,6 @@ stu300_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, dev);
 	dev_info(&pdev->dev, "ST DDC I2C @ %p, irq %d\n",
 		 dev->virtbase, dev->irq);
-	of_i2c_register_devices(adap);
 
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 9aa1b60f7fdd..c457cb447c66 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -25,7 +25,6 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-#include <linux/of_i2c.h>
 #include <linux/of_device.h>
 #include <linux/module.h>
 #include <linux/clk/tegra.h>
@@ -802,8 +801,6 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	of_i2c_register_devices(&i2c_dev->adapter);
-
 	return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
index f3a8790a07e8..6bb3a89a440f 100644
--- a/drivers/i2c/busses/i2c-versatile.c
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -16,7 +16,6 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/io.h>
-#include <linux/of_i2c.h>
 
 #define I2C_CONTROL	0x00
 #define I2C_CONTROLS	0x00
@@ -108,7 +107,6 @@ static int i2c_versatile_probe(struct platform_device *dev)
 	ret = i2c_bit_add_numbered_bus(&i2c->adap);
 	if (ret >= 0) {
 		platform_set_drvdata(dev, i2c);
-		of_i2c_register_devices(&i2c->adap);
 		return 0;
 	}
 
diff --git a/drivers/i2c/busses/i2c-wmt.c b/drivers/i2c/busses/i2c-wmt.c
index baaa7d15b73e..c65da3d913a0 100644
--- a/drivers/i2c/busses/i2c-wmt.c
+++ b/drivers/i2c/busses/i2c-wmt.c
@@ -21,7 +21,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_i2c.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
 
@@ -439,8 +438,6 @@ static int wmt_i2c_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, i2c_dev);
 
-	of_i2c_register_devices(adap);
-
 	return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 433f377b3869..4c8b368d463b 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -40,7 +40,6 @@
 #include <linux/i2c-xiic.h>
 #include <linux/io.h>
 #include <linux/slab.h>
-#include <linux/of_i2c.h>
 
 #define DRIVER_NAME "xiic-i2c"
 
@@ -752,8 +751,6 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 			i2c_new_device(&i2c->adap, pdata->devices + i);
 	}
 
-	of_i2c_register_devices(&i2c->adap);
-
 	return 0;
 
 add_adapter_failed:
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 3d9ca2d3d77e..e874b052b4f8 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -23,7 +23,11 @@
    SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
    Jean Delvare <khali@linux-fr.org>
    Mux support by Rodolfo Giometti <giometti@enneenne.com> and
-   Michael Lawnick <michael.lawnick.ext@nsn.com> */
+   Michael Lawnick <michael.lawnick.ext@nsn.com>
+   OF support is copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
+   (based on a previous patch from Jon Smirl <jonsmirl@gmail.com>) and
+   (c) 2013  Wolfram Sang <wsa@the-dreams.de>
+ */
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -35,7 +39,9 @@
 #include <linux/init.h>
 #include <linux/idr.h>
 #include <linux/mutex.h>
+#include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
 #include <linux/completion.h>
 #include <linux/hardirq.h>
 #include <linux/irqflags.h>
@@ -954,6 +960,104 @@ static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
 	up_read(&__i2c_board_lock);
 }
 
+/* OF support code */
+
+#if IS_ENABLED(CONFIG_OF)
+static void of_i2c_register_devices(struct i2c_adapter *adap)
+{
+	void *result;
+	struct device_node *node;
+
+	/* Only register child devices if the adapter has a node pointer set */
+	if (!adap->dev.of_node)
+		return;
+
+	dev_dbg(&adap->dev, "of_i2c: walking child nodes\n");
+
+	for_each_available_child_of_node(adap->dev.of_node, node) {
+		struct i2c_board_info info = {};
+		struct dev_archdata dev_ad = {};
+		const __be32 *addr;
+		int len;
+
+		dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name);
+
+		if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
+			dev_err(&adap->dev, "of_i2c: modalias failure on %s\n",
+				node->full_name);
+			continue;
+		}
+
+		addr = of_get_property(node, "reg", &len);
+		if (!addr || (len < sizeof(int))) {
+			dev_err(&adap->dev, "of_i2c: invalid reg on %s\n",
+				node->full_name);
+			continue;
+		}
+
+		info.addr = be32_to_cpup(addr);
+		if (info.addr > (1 << 10) - 1) {
+			dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n",
+				info.addr, node->full_name);
+			continue;
+		}
+
+		info.irq = irq_of_parse_and_map(node, 0);
+		info.of_node = of_node_get(node);
+		info.archdata = &dev_ad;
+
+		if (of_get_property(node, "wakeup-source", NULL))
+			info.flags |= I2C_CLIENT_WAKE;
+
+		request_module("%s%s", I2C_MODULE_PREFIX, info.type);
+
+		result = i2c_new_device(adap, &info);
+		if (result == NULL) {
+			dev_err(&adap->dev, "of_i2c: Failure registering %s\n",
+				node->full_name);
+			of_node_put(node);
+			irq_dispose_mapping(info.irq);
+			continue;
+		}
+	}
+}
+
+static int of_dev_node_match(struct device *dev, void *data)
+{
+	return dev->of_node == data;
+}
+
+/* must call put_device() when done with returned i2c_client device */
+struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
+{
+	struct device *dev;
+
+	dev = bus_find_device(&i2c_bus_type, NULL, node,
+					 of_dev_node_match);
+	if (!dev)
+		return NULL;
+
+	return i2c_verify_client(dev);
+}
+EXPORT_SYMBOL(of_find_i2c_device_by_node);
+
+/* must call put_device() when done with returned i2c_adapter device */
+struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
+{
+	struct device *dev;
+
+	dev = bus_find_device(&i2c_bus_type, NULL, node,
+					 of_dev_node_match);
+	if (!dev)
+		return NULL;
+
+	return i2c_verify_adapter(dev);
+}
+EXPORT_SYMBOL(of_find_i2c_adapter_by_node);
+#else
+static void of_i2c_register_devices(struct i2c_adapter *adap) { }
+#endif /* CONFIG_OF */
+
 static int i2c_do_add_adapter(struct i2c_driver *driver,
 			      struct i2c_adapter *adap)
 {
@@ -1058,6 +1162,8 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 
 exit_recovery:
 	/* create pre-declared device nodes */
+	of_i2c_register_devices(adap);
+
 	if (adap->nr < __i2c_first_dynamic_bus_num)
 		i2c_scan_static_board_info(adap);
 
@@ -1282,7 +1388,6 @@ void i2c_del_adapter(struct i2c_adapter *adap)
 }
 EXPORT_SYMBOL(i2c_del_adapter);
 
-
 /* ------------------------------------------------------------------------- */
 
 int i2c_for_each_dev(void *data, int (*fn)(struct device *, void *))
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index 7409ebb33c47..797e3117bef7 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -25,7 +25,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
 #include <linux/of.h>
-#include <linux/of_i2c.h>
 
 /* multiplexer per channel data */
 struct i2c_mux_priv {
@@ -185,8 +184,6 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
 	dev_info(&parent->dev, "Added multiplexed i2c bus %d\n",
 		 i2c_adapter_id(&priv->adap));
 
-	of_i2c_register_devices(&priv->adap);
-
 	return &priv->adap;
 }
 EXPORT_SYMBOL_GPL(i2c_add_mux_adapter);
diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
index f7bf24375f81..74b41ae690f3 100644
--- a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
+++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
@@ -21,7 +21,6 @@
 #include <linux/i2c-mux.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/of_i2c.h>
 #include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
index 6a206e8d58f4..5d4a99ba743e 100644
--- a/drivers/i2c/muxes/i2c-mux-gpio.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -16,7 +16,6 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/gpio.h>
-#include <linux/of_i2c.h>
 #include <linux/of_gpio.h>
 
 struct gpiomux {
diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c
index 0d082027c29a..69a91732ae65 100644
--- a/drivers/i2c/muxes/i2c-mux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c
@@ -20,7 +20,6 @@
 #include <linux/i2c-mux.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/of_i2c.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/i2c-mux-pinctrl.h>
 #include <linux/platform_device.h>
diff --git a/drivers/media/platform/exynos4-is/fimc-is-i2c.c b/drivers/media/platform/exynos4-is/fimc-is-i2c.c
index 617a798d9235..993055605214 100644
--- a/drivers/media/platform/exynos4-is/fimc-is-i2c.c
+++ b/drivers/media/platform/exynos4-is/fimc-is-i2c.c
@@ -12,7 +12,7 @@
 
 #include <linux/clk.h>
 #include <linux/module.h>
-#include <linux/of_i2c.h>
+#include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
@@ -67,8 +67,6 @@ static int fimc_is_i2c_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_enable(&i2c_adap->dev);
 
-	of_i2c_register_devices(i2c_adap);
-
 	return 0;
 }
 
diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c
index 967f6a939340..2276fdc213c5 100644
--- a/drivers/media/platform/exynos4-is/fimc-is.c
+++ b/drivers/media/platform/exynos4-is/fimc-is.c
@@ -21,7 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/of_i2c.h>
+#include <linux/i2c.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 19f556c5957f..f8c66b434fd6 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -20,7 +20,6 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/of_device.h>
-#include <linux/of_i2c.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/types.h>
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 80e5c13b930d..78cc76053328 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -48,12 +48,6 @@ config OF_IRQ
 	def_bool y
 	depends on !SPARC
 
-config OF_I2C
-	def_tristate I2C
-	depends on I2C
-	help
-	  OpenFirmware I2C accessors
-
 config OF_NET
 	depends on NETDEVICES
 	def_bool y
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index 1f9c0c492ef9..efd05102c405 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -3,7 +3,6 @@ obj-$(CONFIG_OF_FLATTREE) += fdt.o
 obj-$(CONFIG_OF_PROMTREE) += pdt.o
 obj-$(CONFIG_OF_ADDRESS)  += address.o
 obj-$(CONFIG_OF_IRQ)    += irq.o
-obj-$(CONFIG_OF_I2C)	+= of_i2c.o
 obj-$(CONFIG_OF_NET)	+= of_net.o
 obj-$(CONFIG_OF_SELFTEST) += selftest.o
 obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
deleted file mode 100644
index b667264222cc..000000000000
--- a/drivers/of/of_i2c.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * OF helpers for the I2C API
- *
- * Copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
- *
- * Based on a previous patch from Jon Smirl <jonsmirl@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/of.h>
-#include <linux/of_i2c.h>
-#include <linux/of_irq.h>
-#include <linux/module.h>
-
-void of_i2c_register_devices(struct i2c_adapter *adap)
-{
-	void *result;
-	struct device_node *node;
-
-	/* Only register child devices if the adapter has a node pointer set */
-	if (!adap->dev.of_node)
-		return;
-
-	dev_dbg(&adap->dev, "of_i2c: walking child nodes\n");
-
-	for_each_available_child_of_node(adap->dev.of_node, node) {
-		struct i2c_board_info info = {};
-		struct dev_archdata dev_ad = {};
-		const __be32 *addr;
-		int len;
-
-		dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name);
-
-		if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
-			dev_err(&adap->dev, "of_i2c: modalias failure on %s\n",
-				node->full_name);
-			continue;
-		}
-
-		addr = of_get_property(node, "reg", &len);
-		if (!addr || (len < sizeof(int))) {
-			dev_err(&adap->dev, "of_i2c: invalid reg on %s\n",
-				node->full_name);
-			continue;
-		}
-
-		info.addr = be32_to_cpup(addr);
-		if (info.addr > (1 << 10) - 1) {
-			dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n",
-				info.addr, node->full_name);
-			continue;
-		}
-
-		info.irq = irq_of_parse_and_map(node, 0);
-		info.of_node = of_node_get(node);
-		info.archdata = &dev_ad;
-
-		if (of_get_property(node, "wakeup-source", NULL))
-			info.flags |= I2C_CLIENT_WAKE;
-
-		request_module("%s%s", I2C_MODULE_PREFIX, info.type);
-
-		result = i2c_new_device(adap, &info);
-		if (result == NULL) {
-			dev_err(&adap->dev, "of_i2c: Failure registering %s\n",
-			        node->full_name);
-			of_node_put(node);
-			irq_dispose_mapping(info.irq);
-			continue;
-		}
-	}
-}
-EXPORT_SYMBOL(of_i2c_register_devices);
-
-static int of_dev_node_match(struct device *dev, void *data)
-{
-        return dev->of_node == data;
-}
-
-/* must call put_device() when done with returned i2c_client device */
-struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
-{
-	struct device *dev;
-
-	dev = bus_find_device(&i2c_bus_type, NULL, node,
-					 of_dev_node_match);
-	if (!dev)
-		return NULL;
-
-	return i2c_verify_client(dev);
-}
-EXPORT_SYMBOL(of_find_i2c_device_by_node);
-
-/* must call put_device() when done with returned i2c_adapter device */
-struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
-{
-	struct device *dev;
-
-	dev = bus_find_device(&i2c_bus_type, NULL, node,
-					 of_dev_node_match);
-	if (!dev)
-		return NULL;
-
-	return i2c_verify_adapter(dev);
-}
-EXPORT_SYMBOL(of_find_i2c_adapter_by_node);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/imx-drm/imx-tve.c b/drivers/staging/imx-drm/imx-tve.c
index a56797d88edc..2d76fd47c3d7 100644
--- a/drivers/staging/imx-drm/imx-tve.c
+++ b/drivers/staging/imx-drm/imx-tve.c
@@ -21,7 +21,7 @@
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/module.h>
-#include <linux/of_i2c.h>
+#include <linux/i2c.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spinlock.h>
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index b3c4b8dac1ce..ed53696e31a6 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -544,6 +544,26 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap)
 
 #endif /* I2C */
 
+#if IS_ENABLED(CONFIG_OF)
+/* must call put_device() when done with returned i2c_client device */
+extern struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
+
+/* must call put_device() when done with returned i2c_adapter device */
+extern struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node);
+
+#else
+
+static inline struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
+{
+	return NULL;
+}
+
+static inline struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
+{
+	return NULL;
+}
+#endif /* CONFIG_OF */
+
 #if IS_ENABLED(CONFIG_ACPI_I2C)
 extern void acpi_i2c_register_devices(struct i2c_adapter *adap);
 #else
diff --git a/include/linux/of_i2c.h b/include/linux/of_i2c.h
deleted file mode 100644
index cfb545cd86b5..000000000000
--- a/include/linux/of_i2c.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Generic I2C API implementation for PowerPC.
- *
- * Copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __LINUX_OF_I2C_H
-#define __LINUX_OF_I2C_H
-
-#if defined(CONFIG_OF_I2C) || defined(CONFIG_OF_I2C_MODULE)
-#include <linux/i2c.h>
-
-extern void of_i2c_register_devices(struct i2c_adapter *adap);
-
-/* must call put_device() when done with returned i2c_client device */
-extern struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
-
-/* must call put_device() when done with returned i2c_adapter device */
-extern struct i2c_adapter *of_find_i2c_adapter_by_node(
-						struct device_node *node);
-
-#else
-static inline void of_i2c_register_devices(struct i2c_adapter *adap)
-{
-	return;
-}
-
-static inline struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
-{
-	return NULL;
-}
-
-/* must call put_device() when done with returned i2c_adapter device */
-static inline struct i2c_adapter *of_find_i2c_adapter_by_node(
-						struct device_node *node)
-{
-	return NULL;
-}
-#endif /* CONFIG_OF_I2C */
-
-#endif /* __LINUX_OF_I2C_H */
diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
index 3f726e4f88db..f2fbde9c3d4c 100644
--- a/sound/soc/fsl/imx-sgtl5000.c
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -13,7 +13,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/of_i2c.h>
+#include <linux/i2c.h>
 #include <linux/clk.h>
 #include <sound/soc.h>
 
diff --git a/sound/soc/fsl/imx-wm8962.c b/sound/soc/fsl/imx-wm8962.c
index 52a36a90f4f4..9fd7a65ae83b 100644
--- a/sound/soc/fsl/imx-wm8962.c
+++ b/sound/soc/fsl/imx-wm8962.c
@@ -15,7 +15,7 @@
 
 #include <linux/module.h>
 #include <linux/of_platform.h>
-#include <linux/of_i2c.h>
+#include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
 #include <sound/soc.h>
-- 
cgit v1.2.3


From 55e71edb81b2b45273e7b284cce13ff24bde846f Mon Sep 17 00:00:00 2001
From: Mika Westerberg <mika.westerberg@linux.intel.com>
Date: Wed, 21 Aug 2013 17:28:23 +0300
Subject: i2c: move ACPI helpers into the core

This follows what has already been done for the DeviceTree helpers. Move
the ACPI helpers from drivers/acpi/acpi_i2c.c to the I2C core and update
documentation accordingly.

This also solves a problem reported by Jerry Snitselaar that we can't build
the ACPI I2C helpers as a module.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 Documentation/acpi/enumeration.txt          |  15 +---
 drivers/acpi/Kconfig                        |   6 --
 drivers/acpi/Makefile                       |   1 -
 drivers/acpi/acpi_i2c.c                     | 103 ----------------------------
 drivers/i2c/busses/i2c-designware-platdrv.c |   1 -
 drivers/i2c/i2c-core.c                      |  91 ++++++++++++++++++++++++
 include/linux/i2c.h                         |   6 --
 7 files changed, 94 insertions(+), 129 deletions(-)
 delete mode 100644 drivers/acpi/acpi_i2c.c

(limited to 'Documentation')

diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
index 958266efcc20..d977778b5e67 100644
--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@@ -228,18 +228,9 @@ ACPI handle like:
 I2C serial bus support
 ~~~~~~~~~~~~~~~~~~~~~~
 The slaves behind I2C bus controller only need to add the ACPI IDs like
-with the platform and SPI drivers. However the I2C bus controller driver
-needs to call acpi_i2c_register_devices() after it has added the adapter.
-
-An I2C bus (controller) driver does:
-
-	...
-	ret = i2c_add_numbered_adapter(adapter);
-	if (ret)
-		/* handle error */
-
-	/* Enumerate the slave devices behind this bus via ACPI */
-	acpi_i2c_register_devices(adapter);
+with the platform and SPI drivers. The I2C core automatically enumerates
+any slave devices behind the controller device once the adapter is
+registered.
 
 Below is an example of how to add ACPI support to the existing mpu3050
 input driver:
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 100bd724f648..4e0162fa5d36 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -180,12 +180,6 @@ config ACPI_DOCK
 	  This driver supports ACPI-controlled docking stations and removable
 	  drive bays such as the IBM Ultrabay and the Dell Module Bay.
 
-config ACPI_I2C
-	def_tristate I2C
-	depends on I2C
-	help
-	  ACPI I2C enumeration support.
-
 config ACPI_PROCESSOR
 	tristate "Processor"
 	select THERMAL
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 81dbeb83bb45..cdaf68b58b00 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -73,7 +73,6 @@ obj-$(CONFIG_ACPI_HED)		+= hed.o
 obj-$(CONFIG_ACPI_EC_DEBUGFS)	+= ec_sys.o
 obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
 obj-$(CONFIG_ACPI_BGRT)		+= bgrt.o
-obj-$(CONFIG_ACPI_I2C)		+= acpi_i2c.o
 
 # processor has its own "processor." module_param namespace
 processor-y			:= processor_driver.o processor_throttling.o
diff --git a/drivers/acpi/acpi_i2c.c b/drivers/acpi/acpi_i2c.c
deleted file mode 100644
index a82c7626aa9b..000000000000
--- a/drivers/acpi/acpi_i2c.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * ACPI I2C enumeration support
- *
- * Copyright (C) 2012, Intel Corporation
- * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/acpi.h>
-#include <linux/device.h>
-#include <linux/export.h>
-#include <linux/i2c.h>
-#include <linux/ioport.h>
-
-ACPI_MODULE_NAME("i2c");
-
-static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
-{
-	struct i2c_board_info *info = data;
-
-	if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
-		struct acpi_resource_i2c_serialbus *sb;
-
-		sb = &ares->data.i2c_serial_bus;
-		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
-			info->addr = sb->slave_address;
-			if (sb->access_mode == ACPI_I2C_10BIT_MODE)
-				info->flags |= I2C_CLIENT_TEN;
-		}
-	} else if (info->irq < 0) {
-		struct resource r;
-
-		if (acpi_dev_resource_interrupt(ares, 0, &r))
-			info->irq = r.start;
-	}
-
-	/* Tell the ACPI core to skip this resource */
-	return 1;
-}
-
-static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
-				       void *data, void **return_value)
-{
-	struct i2c_adapter *adapter = data;
-	struct list_head resource_list;
-	struct i2c_board_info info;
-	struct acpi_device *adev;
-	int ret;
-
-	if (acpi_bus_get_device(handle, &adev))
-		return AE_OK;
-	if (acpi_bus_get_status(adev) || !adev->status.present)
-		return AE_OK;
-
-	memset(&info, 0, sizeof(info));
-	info.acpi_node.handle = handle;
-	info.irq = -1;
-
-	INIT_LIST_HEAD(&resource_list);
-	ret = acpi_dev_get_resources(adev, &resource_list,
-				     acpi_i2c_add_resource, &info);
-	acpi_dev_free_resource_list(&resource_list);
-
-	if (ret < 0 || !info.addr)
-		return AE_OK;
-
-	strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type));
-	if (!i2c_new_device(adapter, &info)) {
-		dev_err(&adapter->dev,
-			"failed to add I2C device %s from ACPI\n",
-			dev_name(&adev->dev));
-	}
-
-	return AE_OK;
-}
-
-/**
- * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter
- * @adapter: pointer to adapter
- *
- * Enumerate all I2C slave devices behind this adapter by walking the ACPI
- * namespace. When a device is found it will be added to the Linux device
- * model and bound to the corresponding ACPI handle.
- */
-void acpi_i2c_register_devices(struct i2c_adapter *adapter)
-{
-	acpi_handle handle;
-	acpi_status status;
-
-	handle = ACPI_HANDLE(adapter->dev.parent);
-	if (!handle)
-		return;
-
-	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
-				     acpi_i2c_add_device, NULL,
-				     adapter, NULL);
-	if (ACPI_FAILURE(status))
-		dev_warn(&adapter->dev, "failed to enumerate I2C slaves\n");
-}
-EXPORT_SYMBOL_GPL(acpi_i2c_register_devices);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index ded77c3bd59c..6e99d9f56dee 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -171,7 +171,6 @@ static int dw_i2c_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failure adding adapter\n");
 		return r;
 	}
-	acpi_i2c_register_devices(adap);
 
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
 	pm_runtime_use_autosuspend(&pdev->dev);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index e874b052b4f8..29d3f045a2bf 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -1058,6 +1058,96 @@ EXPORT_SYMBOL(of_find_i2c_adapter_by_node);
 static void of_i2c_register_devices(struct i2c_adapter *adap) { }
 #endif /* CONFIG_OF */
 
+/* ACPI support code */
+
+#if IS_ENABLED(CONFIG_ACPI)
+static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
+{
+	struct i2c_board_info *info = data;
+
+	if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+		struct acpi_resource_i2c_serialbus *sb;
+
+		sb = &ares->data.i2c_serial_bus;
+		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+			info->addr = sb->slave_address;
+			if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+				info->flags |= I2C_CLIENT_TEN;
+		}
+	} else if (info->irq < 0) {
+		struct resource r;
+
+		if (acpi_dev_resource_interrupt(ares, 0, &r))
+			info->irq = r.start;
+	}
+
+	/* Tell the ACPI core to skip this resource */
+	return 1;
+}
+
+static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
+				       void *data, void **return_value)
+{
+	struct i2c_adapter *adapter = data;
+	struct list_head resource_list;
+	struct i2c_board_info info;
+	struct acpi_device *adev;
+	int ret;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+	if (acpi_bus_get_status(adev) || !adev->status.present)
+		return AE_OK;
+
+	memset(&info, 0, sizeof(info));
+	info.acpi_node.handle = handle;
+	info.irq = -1;
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list,
+				     acpi_i2c_add_resource, &info);
+	acpi_dev_free_resource_list(&resource_list);
+
+	if (ret < 0 || !info.addr)
+		return AE_OK;
+
+	strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type));
+	if (!i2c_new_device(adapter, &info)) {
+		dev_err(&adapter->dev,
+			"failed to add I2C device %s from ACPI\n",
+			dev_name(&adev->dev));
+	}
+
+	return AE_OK;
+}
+
+/**
+ * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter
+ * @adap: pointer to adapter
+ *
+ * Enumerate all I2C slave devices behind this adapter by walking the ACPI
+ * namespace. When a device is found it will be added to the Linux device
+ * model and bound to the corresponding ACPI handle.
+ */
+static void acpi_i2c_register_devices(struct i2c_adapter *adap)
+{
+	acpi_handle handle;
+	acpi_status status;
+
+	handle = ACPI_HANDLE(adap->dev.parent);
+	if (!handle)
+		return;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+				     acpi_i2c_add_device, NULL,
+				     adap, NULL);
+	if (ACPI_FAILURE(status))
+		dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
+}
+#else
+static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) {}
+#endif /* CONFIG_ACPI */
+
 static int i2c_do_add_adapter(struct i2c_driver *driver,
 			      struct i2c_adapter *adap)
 {
@@ -1163,6 +1253,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 exit_recovery:
 	/* create pre-declared device nodes */
 	of_i2c_register_devices(adap);
+	acpi_i2c_register_devices(adap);
 
 	if (adap->nr < __i2c_first_dynamic_bus_num)
 		i2c_scan_static_board_info(adap);
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index ed53696e31a6..2ab11dc38077 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -564,10 +564,4 @@ static inline struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node
 }
 #endif /* CONFIG_OF */
 
-#if IS_ENABLED(CONFIG_ACPI_I2C)
-extern void acpi_i2c_register_devices(struct i2c_adapter *adap);
-#else
-static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) {}
-#endif
-
 #endif /* _LINUX_I2C_H */
-- 
cgit v1.2.3


From e66ff0a921eebd46b339c4548dc7f49592b91f99 Mon Sep 17 00:00:00 2001
From: Jingchang Lu <b35083@freescale.com>
Date: Wed, 21 Aug 2013 10:11:59 +0800
Subject: i2c: imx: use exact SoC revision to document binding

use exact SoC revision instead of wildcard describing
the compatible property requirement in the binding
document. This will make the binding more clearer.

Signed-off-by: Jingchang Lu <b35083@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 Documentation/devicetree/bindings/i2c/i2c-imx.txt | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
index 3614242e7732..4a8513e44740 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
@@ -1,7 +1,10 @@
 * Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
 
 Required properties:
-- compatible : Should be "fsl,<chip>-i2c"
+- compatible :
+  - "fsl,imx1-i2c" for I2C compatible with the one integrated on i.MX1 SoC
+  - "fsl,imx21-i2c" for I2C compatible with the one integrated on i.MX21 SoC
+  - "fsl,vf610-i2c" for I2C compatible with the one integrated on Vybrid vf610 SoC
 - reg : Should contain I2C/HS-I2C registers location and length
 - interrupts : Should contain I2C/HS-I2C interrupt
 
-- 
cgit v1.2.3


From 7be60f2bfdd6c2c2c6273d2ff3ab6c81eec4a863 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <wsa@the-dreams.de>
Date: Fri, 23 Aug 2013 20:10:04 +0200
Subject: i2c: mv64xxx: fix typo in binding documentation

Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
index 73cdc03cc2bf..82e8f6f17179 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
@@ -5,7 +5,7 @@ Required properties :
 
  - reg             : Offset and length of the register set for the device
  - compatible      : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c"
-                     or "marvell,mv7230-i2c"
+                     or "marvell,mv78230-i2c"
  - interrupts      : The interrupt number
 
 Optional properties :
-- 
cgit v1.2.3