From d07479b211b7a86c93883c74b8f9b1e33d06e262 Mon Sep 17 00:00:00 2001 From: Miguel Ojeda Date: Sat, 3 Jul 2021 17:23:16 +0200 Subject: docs: add Rust documentation Most of the documentation for Rust is written within the source code itself, as it is idiomatic for Rust projects. This applies to both the shared infrastructure at `rust/` as well as any other Rust module (e.g. drivers) written across the kernel. However, these documents contain general information that does not fit particularly well in the source code, like the Quick Start guide. It also contains a few other small changes elsewhere in the documentation folder. Reviewed-by: Kees Cook Co-developed-by: Alex Gaynor Signed-off-by: Alex Gaynor Co-developed-by: Finn Behrens Signed-off-by: Finn Behrens Co-developed-by: Adam Bratschi-Kaye Signed-off-by: Adam Bratschi-Kaye Co-developed-by: Wedson Almeida Filho Signed-off-by: Wedson Almeida Filho Co-developed-by: Michael Ellerman Signed-off-by: Michael Ellerman Co-developed-by: Sven Van Asbroeck Signed-off-by: Sven Van Asbroeck Co-developed-by: Wu XiangCheng Signed-off-by: Wu XiangCheng Co-developed-by: Gary Guo Signed-off-by: Gary Guo Co-developed-by: Boris-Chengbiao Zhou Signed-off-by: Boris-Chengbiao Zhou Co-developed-by: Yuki Okushi Signed-off-by: Yuki Okushi Co-developed-by: Wei Liu Signed-off-by: Wei Liu Co-developed-by: Daniel Xu Signed-off-by: Daniel Xu Co-developed-by: Julian Merkle Signed-off-by: Julian Merkle Signed-off-by: Miguel Ojeda --- Documentation/rust/quick-start.rst | 232 +++++++++++++++++++++++++++++++++++++ 1 file changed, 232 insertions(+) create mode 100644 Documentation/rust/quick-start.rst (limited to 'Documentation/rust/quick-start.rst') diff --git a/Documentation/rust/quick-start.rst b/Documentation/rust/quick-start.rst new file mode 100644 index 000000000000..13b7744b1e27 --- /dev/null +++ b/Documentation/rust/quick-start.rst @@ -0,0 +1,232 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Quick Start +=========== + +This document describes how to get started with kernel development in Rust. + + +Requirements: Building +---------------------- + +This section explains how to fetch the tools needed for building. + +Some of these requirements might be available from Linux distributions +under names like ``rustc``, ``rust-src``, ``rust-bindgen``, etc. However, +at the time of writing, they are likely not to be recent enough unless +the distribution tracks the latest releases. + +To easily check whether the requirements are met, the following target +can be used:: + + make LLVM=1 rustavailable + +This triggers the same logic used by Kconfig to determine whether +``RUST_IS_AVAILABLE`` should be enabled; but it also explains why not +if that is the case. + + +rustc +***** + +A particular version of the Rust compiler is required. Newer versions may or +may not work because, for the moment, the kernel depends on some unstable +Rust features. + +If ``rustup`` is being used, enter the checked out source code directory +and run:: + + rustup override set $(scripts/min-tool-version.sh rustc) + +Otherwise, fetch a standalone installer or install ``rustup`` from: + + https://www.rust-lang.org + + +Rust standard library source +**************************** + +The Rust standard library source is required because the build system will +cross-compile ``core`` and ``alloc``. + +If ``rustup`` is being used, run:: + + rustup component add rust-src + +The components are installed per toolchain, thus upgrading the Rust compiler +version later on requires re-adding the component. + +Otherwise, if a standalone installer is used, the Rust repository may be cloned +into the installation folder of the toolchain:: + + git clone --recurse-submodules \ + --branch $(scripts/min-tool-version.sh rustc) \ + https://github.com/rust-lang/rust \ + $(rustc --print sysroot)/lib/rustlib/src/rust + +In this case, upgrading the Rust compiler version later on requires manually +updating this clone. + + +libclang +******** + +``libclang`` (part of LLVM) is used by ``bindgen`` to understand the C code +in the kernel, which means LLVM needs to be installed; like when the kernel +is compiled with ``CC=clang`` or ``LLVM=1``. + +Linux distributions are likely to have a suitable one available, so it is +best to check that first. + +There are also some binaries for several systems and architectures uploaded at: + + https://releases.llvm.org/download.html + +Otherwise, building LLVM takes quite a while, but it is not a complex process: + + https://llvm.org/docs/GettingStarted.html#getting-the-source-code-and-building-llvm + +Please see Documentation/kbuild/llvm.rst for more information and further ways +to fetch pre-built releases and distribution packages. + + +bindgen +******* + +The bindings to the C side of the kernel are generated at build time using +the ``bindgen`` tool. A particular version is required. + +Install it via (note that this will download and build the tool from source):: + + cargo install --locked --version $(scripts/min-tool-version.sh bindgen) bindgen + + +Requirements: Developing +------------------------ + +This section explains how to fetch the tools needed for developing. That is, +they are not needed when just building the kernel. + + +rustfmt +******* + +The ``rustfmt`` tool is used to automatically format all the Rust kernel code, +including the generated C bindings (for details, please see +coding-guidelines.rst). + +If ``rustup`` is being used, its ``default`` profile already installs the tool, +thus nothing needs to be done. If another profile is being used, the component +can be installed manually:: + + rustup component add rustfmt + +The standalone installers also come with ``rustfmt``. + + +clippy +****** + +``clippy`` is a Rust linter. Running it provides extra warnings for Rust code. +It can be run by passing ``CLIPPY=1`` to ``make`` (for details, please see +general-information.rst). + +If ``rustup`` is being used, its ``default`` profile already installs the tool, +thus nothing needs to be done. If another profile is being used, the component +can be installed manually:: + + rustup component add clippy + +The standalone installers also come with ``clippy``. + + +cargo +***** + +``cargo`` is the Rust native build system. It is currently required to run +the tests since it is used to build a custom standard library that contains +the facilities provided by the custom ``alloc`` in the kernel. The tests can +be run using the ``rusttest`` Make target. + +If ``rustup`` is being used, all the profiles already install the tool, +thus nothing needs to be done. + +The standalone installers also come with ``cargo``. + + +rustdoc +******* + +``rustdoc`` is the documentation tool for Rust. It generates pretty HTML +documentation for Rust code (for details, please see +general-information.rst). + +``rustdoc`` is also used to test the examples provided in documented Rust code +(called doctests or documentation tests). The ``rusttest`` Make target uses +this feature. + +If ``rustup`` is being used, all the profiles already install the tool, +thus nothing needs to be done. + +The standalone installers also come with ``rustdoc``. + + +rust-analyzer +************* + +The `rust-analyzer `_ language server can +be used with many editors to enable syntax highlighting, completion, go to +definition, and other features. + +``rust-analyzer`` needs a configuration file, ``rust-project.json``, which +can be generated by the ``rust-analyzer`` Make target. + + +Configuration +------------- + +``Rust support`` (``CONFIG_RUST``) needs to be enabled in the ``General setup`` +menu. The option is only shown if a suitable Rust toolchain is found (see +above), as long as the other requirements are met. In turn, this will make +visible the rest of options that depend on Rust. + +Afterwards, go to:: + + Kernel hacking + -> Sample kernel code + -> Rust samples + +And enable some sample modules either as built-in or as loadable. + + +Building +-------- + +Building a kernel with a complete LLVM toolchain is the best supported setup +at the moment. That is:: + + make LLVM=1 + +For architectures that do not support a full LLVM toolchain, use:: + + make CC=clang + +Using GCC also works for some configurations, but it is very experimental at +the moment. + + +Hacking +------- + +To dive deeper, take a look at the source code of the samples +at ``samples/rust/``, the Rust support code under ``rust/`` and +the ``Rust hacking`` menu under ``Kernel hacking``. + +If GDB/Binutils is used and Rust symbols are not getting demangled, the reason +is the toolchain does not support Rust's new v0 mangling scheme yet. +There are a few ways out: + + - Install a newer release (GDB >= 10.2, Binutils >= 2.36). + + - Some versions of GDB (e.g. vanilla GDB 10.1) are able to use + the pre-demangled names embedded in the debug info (``CONFIG_DEBUG_INFO``). -- cgit v1.2.3