From 475fc7c011ace79258c07d981d348a15614e0573 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 21 Sep 2010 23:22:40 +0000 Subject: powerpc: Fix two typos in Documentation/powerpc/booting-without-of.txt Signed-off-by: Lennert Buytenhek Signed-off-by: Benjamin Herrenschmidt --- Documentation/powerpc/booting-without-of.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/powerpc') diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 302db5da49b3..3272ed59dec7 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -131,7 +131,7 @@ order to avoid the degeneration that had become the ppc32 kernel entry point and the way a new platform should be added to the kernel. The legacy iSeries platform breaks those rules as it predates this scheme, but no new board support will be accepted in the main tree that -doesn't follows them properly. In addition, since the advent of the +doesn't follow them properly. In addition, since the advent of the arch/powerpc merged architecture for ppc32 and ppc64, new 32-bit platforms and 32-bit platforms which move into arch/powerpc will be required to use these rules as well. @@ -1025,7 +1025,7 @@ dtc source code can be found at WARNING: This version is still in early development stage; the resulting device-tree "blobs" have not yet been validated with the -kernel. The current generated bloc lacks a useful reserve map (it will +kernel. The current generated block lacks a useful reserve map (it will be fixed to generate an empty one, it's up to the bootloader to fill it up) among others. The error handling needs work, bugs are lurking, etc... -- cgit v1.2.3 From d164f6d4f9108126f69ba2963cf6fb7ef4ba9232 Mon Sep 17 00:00:00 2001 From: Victor Gallardo Date: Fri, 8 Oct 2010 10:25:27 +0000 Subject: powerpc/4xx: Add suspend and idle support Add suspend/resume support for 4xx compatible CPUs. See /sys/power/state for available power states configured in. Add two different idle states (idle-wait and idle-doze) controlled via sysfs. Default is idle-wait. cat /sys/devices/system/cpu/cpu0/idle [wait] doze To save additional power, use idle-doze. echo doze > /sys/devices/system/cpu/cpu0/idle cat /sys/devices/system/cpu/cpu0/idle wait [doze] Signed-off-by: Victor Gallardo Signed-off-by: Josh Boyer --- Documentation/powerpc/dts-bindings/4xx/cpm.txt | 52 ++++ arch/powerpc/Kconfig | 13 +- arch/powerpc/platforms/44x/Makefile | 5 +- arch/powerpc/sysdev/Makefile | 1 + arch/powerpc/sysdev/ppc4xx_cpm.c | 346 +++++++++++++++++++++++++ 5 files changed, 413 insertions(+), 4 deletions(-) create mode 100644 Documentation/powerpc/dts-bindings/4xx/cpm.txt create mode 100644 arch/powerpc/sysdev/ppc4xx_cpm.c (limited to 'Documentation/powerpc') diff --git a/Documentation/powerpc/dts-bindings/4xx/cpm.txt b/Documentation/powerpc/dts-bindings/4xx/cpm.txt new file mode 100644 index 000000000000..ee459806d35e --- /dev/null +++ b/Documentation/powerpc/dts-bindings/4xx/cpm.txt @@ -0,0 +1,52 @@ +PPC4xx Clock Power Management (CPM) node + +Required properties: + - compatible : compatible list, currently only "ibm,cpm" + - dcr-access-method : "native" + - dcr-reg : < DCR register range > + +Optional properties: + - er-offset : All 4xx SoCs with a CPM controller have + one of two different order for the CPM + registers. Some have the CPM registers + in the following order (ER,FR,SR). The + others have them in the following order + (SR,ER,FR). For the second case set + er-offset = <1>. + - unused-units : specifier consist of one cell. For each + bit in the cell, the corresponding bit + in CPM will be set to turn off unused + devices. + - idle-doze : specifier consist of one cell. For each + bit in the cell, the corresponding bit + in CPM will be set to turn off unused + devices. This is usually just CPM[CPU]. + - standby : specifier consist of one cell. For each + bit in the cell, the corresponding bit + in CPM will be set on standby and + restored on resume. + - suspend : specifier consist of one cell. For each + bit in the cell, the corresponding bit + in CPM will be set on suspend (mem) and + restored on resume. Note, for standby + and suspend the corresponding bits can + be different or the same. Usually for + standby only class 2 and 3 units are set. + However, the interface does not care. + If they are the same, the additional + power saving will be seeing if support + is available to put the DDR in self + refresh mode and any additional power + saving techniques for the specific SoC. + +Example: + CPM0: cpm { + compatible = "ibm,cpm"; + dcr-access-method = "native"; + dcr-reg = <0x160 0x003>; + er-offset = <0>; + unused-units = <0x00000100>; + idle-doze = <0x02000000>; + standby = <0xfeff0000>; + suspend = <0xfeff791d>; +}; diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 06d742c3fbcf..e16b4988f825 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -212,7 +212,7 @@ config ARCH_HIBERNATION_POSSIBLE config ARCH_SUSPEND_POSSIBLE def_bool y depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ - PPC_85xx || PPC_86xx || PPC_PSERIES + PPC_85xx || PPC_86xx || PPC_PSERIES || 44x || 40x config PPC_DCR_NATIVE bool @@ -598,13 +598,11 @@ config EXTRA_TARGETS If unsure, leave blank -if !44x || BROKEN config ARCH_WANTS_FREEZER_CONTROL def_bool y depends on ADB_PMU source kernel/power/Kconfig -endif config SECCOMP bool "Enable seccomp to safely compute untrusted bytecode" @@ -685,6 +683,15 @@ config FSL_PMC Freescale MPC85xx/MPC86xx power management controller support (suspend/resume). For MPC83xx see platforms/83xx/suspend.c +config PPC4xx_CPM + bool + default y + depends on SUSPEND && (44x || 40x) + help + PPC4xx Clock Power Management (CPM) support (suspend/resume). + It also enables support for two different idle states (idle-wait + and idle-doze). + config 4xx_SOC bool diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 82ff326e0795..c04d16df8488 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -1,4 +1,7 @@ -obj-$(CONFIG_44x) := misc_44x.o idle.o +obj-$(CONFIG_44x) += misc_44x.o +ifneq ($(CONFIG_PPC4xx_CPM),y) +obj-$(CONFIG_44x) += idle.o +endif obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_SAM440EP) += sam440ep.o diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 0bef9dacb64e..9c2973479142 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_OF_RTC) += of_rtc.o ifeq ($(CONFIG_PCI),y) obj-$(CONFIG_4xx) += ppc4xx_pci.o endif +obj-$(CONFIG_PPC4xx_CPM) += ppc4xx_cpm.o obj-$(CONFIG_PPC4xx_GPIO) += ppc4xx_gpio.o obj-$(CONFIG_CPM) += cpm_common.o diff --git a/arch/powerpc/sysdev/ppc4xx_cpm.c b/arch/powerpc/sysdev/ppc4xx_cpm.c new file mode 100644 index 000000000000..73b86cc5ea74 --- /dev/null +++ b/arch/powerpc/sysdev/ppc4xx_cpm.c @@ -0,0 +1,346 @@ +/* + * PowerPC 4xx Clock and Power Management + * + * Copyright (C) 2010, Applied Micro Circuits Corporation + * Victor Gallardo (vgallardo@apm.com) + * + * Based on arch/powerpc/platforms/44x/idle.c: + * Jerone Young + * Copyright 2008 IBM Corp. + * + * Based on arch/powerpc/sysdev/fsl_pmc.c: + * Anton Vorontsov + * Copyright 2009 MontaVista Software, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define CPM_ER 0 +#define CPM_FR 1 +#define CPM_SR 2 + +#define CPM_IDLE_WAIT 0 +#define CPM_IDLE_DOZE 1 + +struct cpm { + dcr_host_t dcr_host; + unsigned int dcr_offset[3]; + unsigned int powersave_off; + unsigned int unused; + unsigned int idle_doze; + unsigned int standby; + unsigned int suspend; +}; + +static struct cpm cpm; + +struct cpm_idle_mode { + unsigned int enabled; + const char *name; +}; + +static struct cpm_idle_mode idle_mode[] = { + [CPM_IDLE_WAIT] = { 1, "wait" }, /* default */ + [CPM_IDLE_DOZE] = { 0, "doze" }, +}; + +static unsigned int cpm_set(unsigned int cpm_reg, unsigned int mask) +{ + unsigned int value; + + /* CPM controller supports 3 different types of sleep interface + * known as class 1, 2 and 3. For class 1 units, they are + * unconditionally put to sleep when the corresponding CPM bit is + * set. For class 2 and 3 units this is not case; if they can be + * put to to sleep, they will. Here we do not verify, we just + * set them and expect them to eventually go off when they can. + */ + value = dcr_read(cpm.dcr_host, cpm.dcr_offset[cpm_reg]); + dcr_write(cpm.dcr_host, cpm.dcr_offset[cpm_reg], value | mask); + + /* return old state, to restore later if needed */ + return value; +} + +static void cpm_idle_wait(void) +{ + unsigned long msr_save; + + /* save off initial state */ + msr_save = mfmsr(); + /* sync required when CPM0_ER[CPU] is set */ + mb(); + /* set wait state MSR */ + mtmsr(msr_save|MSR_WE|MSR_EE|MSR_CE|MSR_DE); + isync(); + /* return to initial state */ + mtmsr(msr_save); + isync(); +} + +static void cpm_idle_sleep(unsigned int mask) +{ + unsigned int er_save; + + /* update CPM_ER state */ + er_save = cpm_set(CPM_ER, mask); + + /* go to wait state so that CPM0_ER[CPU] can take effect */ + cpm_idle_wait(); + + /* restore CPM_ER state */ + dcr_write(cpm.dcr_host, cpm.dcr_offset[CPM_ER], er_save); +} + +static void cpm_idle_doze(void) +{ + cpm_idle_sleep(cpm.idle_doze); +} + +static void cpm_idle_config(int mode) +{ + int i; + + if (idle_mode[mode].enabled) + return; + + for (i = 0; i < ARRAY_SIZE(idle_mode); i++) + idle_mode[i].enabled = 0; + + idle_mode[mode].enabled = 1; +} + +static ssize_t cpm_idle_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + char *s = buf; + int i; + + for (i = 0; i < ARRAY_SIZE(idle_mode); i++) { + if (idle_mode[i].enabled) + s += sprintf(s, "[%s] ", idle_mode[i].name); + else + s += sprintf(s, "%s ", idle_mode[i].name); + } + + *(s-1) = '\n'; /* convert the last space to a newline */ + + return s - buf; +} + +static ssize_t cpm_idle_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t n) +{ + int i; + char *p; + int len; + + p = memchr(buf, '\n', n); + len = p ? p - buf : n; + + for (i = 0; i < ARRAY_SIZE(idle_mode); i++) { + if (strncmp(buf, idle_mode[i].name, len) == 0) { + cpm_idle_config(i); + return n; + } + } + + return -EINVAL; +} + +static struct kobj_attribute cpm_idle_attr = + __ATTR(idle, 0644, cpm_idle_show, cpm_idle_store); + +static void cpm_idle_config_sysfs(void) +{ + struct sys_device *sys_dev; + unsigned long ret; + + sys_dev = get_cpu_sysdev(0); + + ret = sysfs_create_file(&sys_dev->kobj, + &cpm_idle_attr.attr); + if (ret) + printk(KERN_WARNING + "cpm: failed to create idle sysfs entry\n"); +} + +static void cpm_idle(void) +{ + if (idle_mode[CPM_IDLE_DOZE].enabled) + cpm_idle_doze(); + else + cpm_idle_wait(); +} + +static int cpm_suspend_valid(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + return !!cpm.standby; + case PM_SUSPEND_MEM: + return !!cpm.suspend; + default: + return 0; + } +} + +static void cpm_suspend_standby(unsigned int mask) +{ + unsigned long tcr_save; + + /* disable decrement interrupt */ + tcr_save = mfspr(SPRN_TCR); + mtspr(SPRN_TCR, tcr_save & ~TCR_DIE); + + /* go to sleep state */ + cpm_idle_sleep(mask); + + /* restore decrement interrupt */ + mtspr(SPRN_TCR, tcr_save); +} + +static int cpm_suspend_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + cpm_suspend_standby(cpm.standby); + break; + case PM_SUSPEND_MEM: + cpm_suspend_standby(cpm.suspend); + break; + } + + return 0; +} + +static struct platform_suspend_ops cpm_suspend_ops = { + .valid = cpm_suspend_valid, + .enter = cpm_suspend_enter, +}; + +static int cpm_get_uint_property(struct device_node *np, + const char *name) +{ + int len; + const unsigned int *prop = of_get_property(np, name, &len); + + if (prop == NULL || len < sizeof(u32)) + return 0; + + return *prop; +} + +static int __init cpm_init(void) +{ + struct device_node *np; + int dcr_base, dcr_len; + int ret = 0; + + if (!cpm.powersave_off) { + cpm_idle_config(CPM_IDLE_WAIT); + ppc_md.power_save = &cpm_idle; + } + + np = of_find_compatible_node(NULL, NULL, "ibm,cpm"); + if (!np) { + ret = -EINVAL; + goto out; + } + + dcr_base = dcr_resource_start(np, 0); + dcr_len = dcr_resource_len(np, 0); + + if (dcr_base == 0 || dcr_len == 0) { + printk(KERN_ERR "cpm: could not parse dcr property for %s\n", + np->full_name); + ret = -EINVAL; + goto out; + } + + cpm.dcr_host = dcr_map(np, dcr_base, dcr_len); + + if (!DCR_MAP_OK(cpm.dcr_host)) { + printk(KERN_ERR "cpm: failed to map dcr property for %s\n", + np->full_name); + ret = -EINVAL; + goto out; + } + + /* All 4xx SoCs with a CPM controller have one of two + * different order for the CPM registers. Some have the + * CPM registers in the following order (ER,FR,SR). The + * others have them in the following order (SR,ER,FR). + */ + + if (cpm_get_uint_property(np, "er-offset") == 0) { + cpm.dcr_offset[CPM_ER] = 0; + cpm.dcr_offset[CPM_FR] = 1; + cpm.dcr_offset[CPM_SR] = 2; + } else { + cpm.dcr_offset[CPM_ER] = 1; + cpm.dcr_offset[CPM_FR] = 2; + cpm.dcr_offset[CPM_SR] = 0; + } + + /* Now let's see what IPs to turn off for the following modes */ + + cpm.unused = cpm_get_uint_property(np, "unused-units"); + cpm.idle_doze = cpm_get_uint_property(np, "idle-doze"); + cpm.standby = cpm_get_uint_property(np, "standby"); + cpm.suspend = cpm_get_uint_property(np, "suspend"); + + /* If some IPs are unused let's turn them off now */ + + if (cpm.unused) { + cpm_set(CPM_ER, cpm.unused); + cpm_set(CPM_FR, cpm.unused); + } + + /* Now let's export interfaces */ + + if (!cpm.powersave_off && cpm.idle_doze) + cpm_idle_config_sysfs(); + + if (cpm.standby || cpm.suspend) + suspend_set_ops(&cpm_suspend_ops); +out: + if (np) + of_node_put(np); + return ret; +} + +late_initcall(cpm_init); + +static int __init cpm_powersave_off(char *arg) +{ + cpm.powersave_off = 1; + return 0; +} +__setup("powersave=off", cpm_powersave_off); -- cgit v1.2.3