From 3efbdd136e52ee4028b5bb5b848a6043cf61cd6e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 30 Aug 2006 08:58:00 +1000 Subject: [POWERPC] Fix MPIC sense codes in documentation The booting-without-of.txt had incorrect definition for the sense codes for an OpenPIC controller Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- Documentation/powerpc/booting-without-of.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation/powerpc') diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 8c48b8a27b9c..5c0ba235f5a5 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1136,10 +1136,10 @@ Sense and level information should be encoded as follows: Devices connected to openPIC-compatible controllers should encode sense and polarity as follows: - 0 = high to low edge sensitive type enabled + 0 = low to high edge sensitive type enabled 1 = active low level sensitive type enabled - 2 = low to high edge sensitive type enabled - 3 = active high level sensitive type enabled + 2 = active high level sensitive type enabled + 3 = high to low edge sensitive type enabled ISA PIC interrupt controllers should adhere to the ISA PIC encodings listed below: -- cgit v1.2.3