From 224dc50ece1b40f8cff5ecadd42a6b2691e231de Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 21 Oct 2006 02:05:20 +0100 Subject: [MIPS] Cleanup remaining references to mips_counter_frequency. Noticed by Samium Gromoff but his patch got stale in flight ... Signed-off-by: Ralf Baechle --- Documentation/mips/time.README | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'Documentation/mips') diff --git a/Documentation/mips/time.README b/Documentation/mips/time.README index 69ddc5c14b79..e1304b6bc483 100644 --- a/Documentation/mips/time.README +++ b/Documentation/mips/time.README @@ -63,7 +63,7 @@ the following functions or values: a) board_time_init - a function pointer. Invoked at the beginnig of time_init(). It is optional. 1. (optional) set up RTC routines - 2. (optional) calibrate and set the mips_counter_frequency + 2. (optional) calibrate and set the mips_hpt_frequency b) plat_timer_setup - a function pointer. Invoked at the end of time_init() 1. (optional) over-ride any decisions made in time_init() @@ -72,7 +72,7 @@ the following functions or values: c) (optional) board-specific RTC routines. - d) (optional) mips_counter_frequency - It must be definied if the board + d) (optional) mips_hpt_frequency - It must be definied if the board is using CPU counter for timer interrupt or it is using fixed rate gettimeoffset(). @@ -104,7 +104,7 @@ Step 1: decide how you like to implement the time services. or use an exnternal timer? In order to use CPU counter register as the timer interrupt source, you - must know the counter speed (mips_counter_frequency). It is usually the + must know the counter speed (mips_hpt_frequency). It is usually the same as the CPU speed or an integral divisor of it. d) decide on whether you want to use high-level or low-level timer @@ -121,8 +121,8 @@ Step 3: implement rtc routines, board_time_init() and plat_timer_setup() if needed. board_time_init() - - a) (optional) set up RTC routines, - b) (optional) calibrate and set the mips_counter_frequency + a) (optional) set up RTC routines, + b) (optional) calibrate and set the mips_hpt_frequency (only needed if you intended to use fixed_rate_gettimeoffset or use cpu counter as timer interrupt source) -- cgit v1.2.3