From be2a608bd08ec00e19e14b322e07f443d2711084 Mon Sep 17 00:00:00 2001 From: John Anthony Kazos Jr Date: Wed, 9 May 2007 08:50:42 +0200 Subject: documentation: convert the Documentation directory to UTF-8 Convert files within the Documentation directory to UTF-8. Adrian Bunk: small additional fixes Signed-off-by: John Anthony Kazos Jr. Signed-off-by: Adrian Bunk --- Documentation/hwmon/adm1026 | 2 +- Documentation/hwmon/gl518sm | 2 +- Documentation/hwmon/lm83 | 2 +- Documentation/hwmon/sis5595 | 2 +- Documentation/hwmon/via686a | 2 +- Documentation/hwmon/w83792d | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'Documentation/hwmon') diff --git a/Documentation/hwmon/adm1026 b/Documentation/hwmon/adm1026 index 473c689d7924..f4327db2307e 100644 --- a/Documentation/hwmon/adm1026 +++ b/Documentation/hwmon/adm1026 @@ -80,7 +80,7 @@ temperature sensor inputs. Both the PWM output and the DAC output can be used to control fan speed. Usually only one of these two outputs will be used. Write the minimum PWM or DAC value to the appropriate control register. Then set the low temperature limit in the tmin values for each -temperature sensor. The range of control is fixed at 20 °C, and the +temperature sensor. The range of control is fixed at 20 °C, and the largest difference between current and tmin of the temperature sensors sets the control output. See the datasheet for several example circuits for controlling fan speed with the PWM and DAC outputs. The fan speed sensors diff --git a/Documentation/hwmon/gl518sm b/Documentation/hwmon/gl518sm index ce0881883bca..229f8b789185 100644 --- a/Documentation/hwmon/gl518sm +++ b/Documentation/hwmon/gl518sm @@ -13,7 +13,7 @@ Supported chips: Authors: Frodo Looijaard , - Kyösti Mälkki + Kyösti Mälkki Hong-Gunn Chew Jean Delvare diff --git a/Documentation/hwmon/lm83 b/Documentation/hwmon/lm83 index f7aad1489cb0..a04d1fe9269c 100644 --- a/Documentation/hwmon/lm83 +++ b/Documentation/hwmon/lm83 @@ -45,7 +45,7 @@ Unconfirmed motherboards: The LM82 is confirmed to have been found on most AMD Geode reference designs and test platforms. -The driver has been successfully tested by Magnus Forsström, who I'd +The driver has been successfully tested by Magnus Forsström, who I'd like to thank here. More testers will be of course welcome. The fact that the LM83 is only scarcely used can be easily explained. diff --git a/Documentation/hwmon/sis5595 b/Documentation/hwmon/sis5595 index b7ae36b8cdf5..4f8877a34f37 100644 --- a/Documentation/hwmon/sis5595 +++ b/Documentation/hwmon/sis5595 @@ -8,7 +8,7 @@ Supported chips: Datasheet: Publicly available at the Silicon Integrated Systems Corp. site. Authors: - Kyösti Mälkki , + Kyösti Mälkki , Mark D. Studebaker , Aurelien Jarno 2.6 port diff --git a/Documentation/hwmon/via686a b/Documentation/hwmon/via686a index a936fb3824b2..d651b25f7519 100644 --- a/Documentation/hwmon/via686a +++ b/Documentation/hwmon/via686a @@ -8,7 +8,7 @@ Supported chips: Datasheet: On request through web form (http://www.via.com.tw/en/support/datasheets/) Authors: - Kyösti Mälkki , + Kyösti Mälkki , Mark D. Studebaker Bob Dougherty (Some conversion-factor data were contributed by diff --git a/Documentation/hwmon/w83792d b/Documentation/hwmon/w83792d index 8171c285bb55..14a668ed8aaa 100644 --- a/Documentation/hwmon/w83792d +++ b/Documentation/hwmon/w83792d @@ -107,7 +107,7 @@ Known problems: by CR[0x49h]. - The function of vid and vrm has not been finished, because I'm NOT very familiar with them. Adding support is welcome. -  - The function of chassis open detection needs more tests. +  - The function of chassis open detection needs more tests. - If you have ASUS server board and chip was not found: Then you will need to upgrade to latest (or beta) BIOS. If it does not help please contact us. -- cgit v1.2.3