From 1754e4c5c7650da6581dc28f182af9010b84e9c2 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Sat, 13 Apr 2013 01:22:11 +0900 Subject: documentation: hwmon: Fix typo in documentation/hwmon Correct spelling typo in Documentation/hwmon Signed-off-by: Masanari Iida Signed-off-by: Guenter Roeck --- Documentation/hwmon/sht15 | 2 +- Documentation/hwmon/zl6100 | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/hwmon') diff --git a/Documentation/hwmon/sht15 b/Documentation/hwmon/sht15 index 02850bdfac18..778987d1856f 100644 --- a/Documentation/hwmon/sht15 +++ b/Documentation/hwmon/sht15 @@ -40,7 +40,7 @@ bits for humidity, or 12 bits for temperature and 8 bits for humidity. The humidity calibration coefficients are programmed into an OTP memory on the chip. These coefficients are used to internally calibrate the signals from the sensors. Disabling the reload of those coefficients allows saving 10ms for each -measurement and decrease power consumption, while loosing on precision. +measurement and decrease power consumption, while losing on precision. Some options may be set directly in the sht15_platform_data structure or via sysfs attributes. diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100 index 756b57c6b73e..33908a4d68ff 100644 --- a/Documentation/hwmon/zl6100 +++ b/Documentation/hwmon/zl6100 @@ -125,7 +125,7 @@ in2_label "vmon" in2_input Measured voltage on VMON (ZL2004) or VDRV (ZL9101M, ZL9117M) pin. Reported voltage is 16x the voltage on the pin (adjusted internally by the chip). -in2_lcrit Critical minumum VMON/VDRV Voltage. +in2_lcrit Critical minimum VMON/VDRV Voltage. in2_crit Critical maximum VMON/VDRV voltage. in2_lcrit_alarm VMON/VDRV voltage critical low alarm. in2_crit_alarm VMON/VDRV voltage critical high alarm. -- cgit v1.2.3