From 55aa601e14cbec987fa577a895e9297df1d0a71d Mon Sep 17 00:00:00 2001 From: Phillip Susi Date: Thu, 16 Nov 2006 01:19:23 -0800 Subject: [PATCH] Update udf documentation to reflect current state of read/write support Change Documentation/filesystems/udf.txt from saying that read/write mounts on cd media are not supported to instead state the current level of support. Specifically that it works fine on dvd+rw media and can be made to work on cd-rw media via the pktcdvd device. Cc: Peter Osterlund Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/udf.txt | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'Documentation/filesystems') diff --git a/Documentation/filesystems/udf.txt b/Documentation/filesystems/udf.txt index 511b4230c053..fde829a756e6 100644 --- a/Documentation/filesystems/udf.txt +++ b/Documentation/filesystems/udf.txt @@ -7,8 +7,17 @@ If you encounter problems with reading UDF discs using this driver, please report them to linux_udf@hpesjro.fc.hp.com, which is the developer's list. -Write support requires a block driver which supports writing. The current -scsi and ide cdrom drivers do not support writing. +Write support requires a block driver which supports writing. Currently +dvd+rw drives and media support true random sector writes, and so a udf +filesystem on such devices can be directly mounted read/write. CD-RW +media however, does not support this. Instead the media can be formatted +for packet mode using the utility cdrwtool, then the pktcdvd driver can +be bound to the underlying cd device to provide the required buffering +and read-modify-write cycles to allow the filesystem random sector writes +while providing the hardware with only full packet writes. While not +required for dvd+rw media, use of the pktcdvd driver often enhances +performance due to very poor read-modify-write support supplied internally +by drive firmware. ------------------------------------------------------------------------------- The following mount options are supported: -- cgit v1.2.3