From fcbf5ca0b870c26e1c2d89a31c87e65d952dc253 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 17 Jul 2016 11:34:58 -0300 Subject: [media] doc-rst: move DVB avulse docs to Documentation/media There are several documentation stuff under Documentation/dvb. Move them to Documentation/media/dvb-drivers and rename them to rst, as they'll soon be converted to rst files. No changes at the documentation. Signed-off-by: Mauro Carvalho Chehab --- Documentation/dvb/technisat.txt | 78 ----------------------------------------- 1 file changed, 78 deletions(-) delete mode 100644 Documentation/dvb/technisat.txt (limited to 'Documentation/dvb/technisat.txt') diff --git a/Documentation/dvb/technisat.txt b/Documentation/dvb/technisat.txt deleted file mode 100644 index f0cc4f2d8365..000000000000 --- a/Documentation/dvb/technisat.txt +++ /dev/null @@ -1,78 +0,0 @@ -How to set up the Technisat/B2C2 Flexcop devices -================================================ - -1) Find out what device you have -================================ - -Important Notice: The driver does NOT support Technisat USB 2 devices! - -First start your linux box with a shipped kernel: -lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example: -02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / - Technisat SkyStar2 DVB card (rev 02) - -dmesg | grep frontend may show you for example: -DVB: registering frontend 0 (Conexant CX24123/CX24109)... - -2) Kernel compilation: -====================== - -If the Flexcop / Technisat is the only DVB / TV / Radio device in your box - get rid of unnecessary modules and check this one: -"Multimedia support" => "Customise analog and hybrid tuner modules to build" -In this directory uncheck every driver which is activated there - (except "Simple tuner support" for ATSC 3rd generation only -> see case 9 please). - -Then please activate: -2a) Main module part: -"Multimedia support" => "DVB/ATSC adapters" - => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" - -a.) => "Technisat/B2C2 Air/Sky/Cable2PC PCI" (PCI card) or -b.) => "Technisat/B2C2 Air/Sky/Cable2PC USB" (USB 1.1 adapter) - and for troubleshooting purposes: -c.) => "Enable debug for the B2C2 FlexCop drivers" - -2b) Frontend / Tuner / Demodulator module part: -"Multimedia support" => "DVB/ATSC adapters" - => "Customise the frontend modules to build" "Customise DVB frontends" => - -1.) SkyStar DVB-S Revision 2.3: -a.) => "Zarlink VP310/MT312/ZL10313 based" -b.) => "Generic I2C PLL based tuners" - -2.) SkyStar DVB-S Revision 2.6: -a.) => "ST STV0299 based" -b.) => "Generic I2C PLL based tuners" - -3.) SkyStar DVB-S Revision 2.7: -a.) => "Samsung S5H1420 based" -b.) => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" -c.) => "ISL6421 SEC controller" - -4.) SkyStar DVB-S Revision 2.8: -a.) => "Conexant CX24123 based" -b.) => "Conexant CX24113/CX24128 tuner for DVB-S/DSS" -c.) => "ISL6421 SEC controller" - -5.) AirStar DVB-T card: -a.) => "Zarlink MT352 based" -b.) => "Generic I2C PLL based tuners" - -6.) CableStar DVB-C card: -a.) => "ST STV0297 based" -b.) => "Generic I2C PLL based tuners" - -7.) AirStar ATSC card 1st generation: -a.) => "Broadcom BCM3510" - -8.) AirStar ATSC card 2nd generation: -a.) => "NxtWave Communications NXT2002/NXT2004 based" -b.) => "Generic I2C PLL based tuners" - -9.) AirStar ATSC card 3rd generation: -a.) => "LG Electronics LGDT3302/LGDT3303 based" -b.) "Multimedia support" => "Customise analog and hybrid tuner modules to build" - => "Simple tuner support" - -Author: Uwe Bugla August 2009 -- cgit v1.2.3