From 726bd223105c04f7bf5eacdc2540819c301061f7 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Mon, 1 May 2017 09:38:13 +0200 Subject: powerpc/8xx: Adding support of IRQ in MPC8xx GPIO This patch allows the use of IRQ to notify the change of GPIO status on MPC8xx CPM IO ports. This then allows to associate IRQs to GPIOs in the Device Tree. Ex: CPM1_PIO_C: gpio-controller@960 { #gpio-cells = <2>; compatible = "fsl,cpm1-pario-bank-c"; reg = <0x960 0x10>; fsl,cpm1-gpio-irq-mask = <0x0fff>; interrupts = <1 2 6 9 10 11 14 15 23 24 26 31>; interrupt-parent = <&CPM_PIC>; gpio-controller; }; The property 'fsl,cpm1-gpio-irq-mask' defines which of the 16 GPIOs have the associated interrupts defined in the 'interrupts' property. Signed-off-by: Christophe Leroy Signed-off-by: Scott Wood --- .../devicetree/bindings/soc/fsl/cpm_qe/gpio.txt | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt index 349f79fd7076..626e1afa64a6 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt @@ -13,8 +13,17 @@ Required properties: - #gpio-cells : Should be two. The first cell is the pin number and the second cell is used to specify optional parameters (currently unused). - gpio-controller : Marks the port as GPIO controller. +Optional properties: +- fsl,cpm1-gpio-irq-mask : For banks having interrupt capability (like port C + on CPM1), this item tells which ports have an associated interrupt (ports are + listed in the same order as in PCINT register) +- interrupts : This property provides the list of interrupt for each GPIO having + one as described by the fsl,cpm1-gpio-irq-mask property. There should be as + many interrupts as number of ones in the mask property. The first interrupt in + the list corresponds to the most significant bit of the mask. +- interrupt-parent : Parent for the above interrupt property. -Example of three SOC GPIO banks defined as gpio-controller nodes: +Example of four SOC GPIO banks defined as gpio-controller nodes: CPM1_PIO_A: gpio-controller@950 { #gpio-cells = <2>; @@ -30,6 +39,16 @@ Example of three SOC GPIO banks defined as gpio-controller nodes: gpio-controller; }; + CPM1_PIO_C: gpio-controller@960 { + #gpio-cells = <2>; + compatible = "fsl,cpm1-pario-bank-c"; + reg = <0x960 0x10>; + fsl,cpm1-gpio-irq-mask = <0x0fff>; + interrupts = <1 2 6 9 10 11 14 15 23 24 26 31>; + interrupt-parent = <&CPM_PIC>; + gpio-controller; + }; + CPM1_PIO_E: gpio-controller@ac8 { #gpio-cells = <2>; compatible = "fsl,cpm1-pario-bank-e"; -- cgit v1.2.3 From 5a61ef74f269f2573f48fa53607a8911216c3326 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Tue, 9 May 2017 13:16:52 +1000 Subject: powerpc/64s: Support new device tree binding for discovering CPU features The ibm,powerpc-cpu-features device tree binding describes CPU features with ASCII names and extensible compatibility, privilege, and enablement metadata that allows improved flexibility and compatibility with new hardware. The interface is described in detail in ibm,powerpc-cpu-features.txt in this patch. Currently this code is not enabled by default, and there are no released firmwares that provide the binding. Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman --- .../bindings/powerpc/ibm,powerpc-cpu-features.txt | 248 +++++ arch/powerpc/Kconfig | 16 + arch/powerpc/include/asm/cpu_has_feature.h | 6 +- arch/powerpc/include/asm/cputable.h | 2 + arch/powerpc/include/asm/dt_cpu_ftrs.h | 26 + arch/powerpc/include/asm/reg.h | 1 + arch/powerpc/include/uapi/asm/cputable.h | 7 + arch/powerpc/kernel/Makefile | 1 + arch/powerpc/kernel/cputable.c | 37 +- arch/powerpc/kernel/dt_cpu_ftrs.c | 1031 ++++++++++++++++++++ arch/powerpc/kernel/prom.c | 29 +- arch/powerpc/kernel/setup_64.c | 10 +- 12 files changed, 1398 insertions(+), 16 deletions(-) create mode 100644 Documentation/devicetree/bindings/powerpc/ibm,powerpc-cpu-features.txt create mode 100644 arch/powerpc/include/asm/dt_cpu_ftrs.h create mode 100644 arch/powerpc/kernel/dt_cpu_ftrs.c (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/powerpc/ibm,powerpc-cpu-features.txt b/Documentation/devicetree/bindings/powerpc/ibm,powerpc-cpu-features.txt new file mode 100644 index 000000000000..5af426e13334 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/ibm,powerpc-cpu-features.txt @@ -0,0 +1,248 @@ +*** NOTE *** +This document is copied from OPAL firmware +(skiboot/doc/device-tree/ibm,powerpc-cpu-features/binding.txt) + +There is more complete overview and documentation of features in that +source tree. All patches and modifications should go there. +************ + +ibm,powerpc-cpu-features binding +================================ + +This device tree binding describes CPU features available to software, with +enablement, privilege, and compatibility metadata. + +More general description of design and implementation of this binding is +found in design.txt, which also points to documentation of specific features. + + +/cpus/ibm,powerpc-cpu-features node binding +------------------------------------------- + +Node: ibm,powerpc-cpu-features + +Description: Container of CPU feature nodes. + +The node name must be "ibm,powerpc-cpu-features". + +It is implemented as a child of the node "/cpus", but this must not be +assumed by parsers. + +The node is optional but should be provided by new OPAL firmware. + +Properties: + +- compatible + Usage: required + Value type: string + Definition: "ibm,powerpc-cpu-features" + + This compatibility refers to backwards compatibility of the overall + design with parsers that behave according to these guidelines. This can + be extended in a backward compatible manner which would not warrant a + revision of the compatible property. + +- isa + Usage: required + Value type: + Definition: + + isa that the CPU is currently running in. This provides instruction set + compatibility, less the individual feature nodes. For example, an ISA v3.0 + implementation that lacks the "transactional-memory" cpufeature node + should not use transactional memory facilities. + + Value corresponds to the "Power ISA Version" multiplied by 1000. + For example, <3000> corresponds to Version 3.0, <2070> to Version 2.07. + The minor digit is available for revisions. + +- display-name + Usage: optional + Value type: string + Definition: + + A human readable name for the CPU. + +/cpus/ibm,powerpc-cpu-features/example-feature node bindings +---------------------------------------------------------------- + +Each child node of cpu-features represents a CPU feature / capability. + +Node: A string describing an architected CPU feature, e.g., "floating-point". + +Description: A feature or capability supported by the CPUs. + +The name of the node is a human readable string that forms the interface +used to describe features to software. Features are currently documented +in the code where they are implemented in skiboot/core/cpufeatures.c + +Presence of the node indicates the feature is available. + +Properties: + +- isa + Usage: required + Value type: + Definition: + + First level of the Power ISA that the feature appears in. + Software should filter out features when constraining the + environment to a particular ISA version. + + Value is defined similarly to /cpus/features/isa + +- usable-privilege + Usage: required + Value type: bit mask + Definition: + Bit numbers are LSB0 + bit 0 - PR (problem state / user mode) + bit 1 - OS (privileged state) + bit 2 - HV (hypervisor state) + All other bits reserved and should be zero. + + This property describes the privilege levels and/or software components + that can use the feature. + + If bit 0 is set, then the hwcap-bit-nr property will exist. + + +- hv-support + Usage: optional + Value type: bit mask + Definition: + Bit numbers are LSB0 + bit 0 - HFSCR + All other bits reserved and should be zero. + + This property describes the HV privilege support required to enable the + feature to lesser privilege levels. If the property does not exist then no + support is required. + + If no bits are set, the hypervisor must have explicit/custom support for + this feature. + + If the HFSCR bit is set, then the hfscr-bit-nr property will exist and + the feature may be enabled by setting this bit in the HFSCR register. + + +- os-support + Usage: optional + Value type: bit mask + Definition: + Bit numbers are LSB0 + bit 0 - FSCR + All other bits reserved and should be zero. + + This property describes the OS privilege support required to enable the + feature to lesser privilege levels. If the property does not exist then no + support is required. + + If no bits are set, the operating system must have explicit/custom support + for this feature. + + If the FSCR bit is set, then the fscr-bit-nr property will exist and + the feature may be enabled by setting this bit in the FSCR register. + + +- hfscr-bit-nr + Usage: optional + Value type: + Definition: HFSCR bit position (LSB0) + + This property exists when the hv-support property HFSCR bit is set. This + property describes the bit number in the HFSCR register that the + hypervisor must set in order to enable this feature. + + This property also exists if an HFSCR bit corresponds with this feature. + This makes CPU feature parsing slightly simpler. + + +- fscr-bit-nr + Usage: optional + Value type: + Definition: FSCR bit position (LSB0) + + This property exists when the os-support property FSCR bit is set. This + property describes the bit number in the FSCR register that the + operating system must set in order to enable this feature. + + This property also exists if an FSCR bit corresponds with this feature. + This makes CPU feature parsing slightly simpler. + + +- hwcap-bit-nr + Usage: optional + Value type: + Definition: Linux ELF AUX vector bit position (LSB0) + + This property may exist when the usable-privilege property value has PR bit set. + This property describes the bit number that should be set in the ELF AUX + hardware capability vectors in order to advertise this feature to userspace. + Bits 0-31 correspond to bits 0-31 in AT_HWCAP vector. Bits 32-63 correspond + to 0-31 in AT_HWCAP2 vector, and so on. Missing AT_HWCAPx vectors implies + that the feature is not enabled or can not be advertised. Operating systems + may provide a number of unassigned hardware capability bits to allow for new + features to be advertised. + + Some properties representing features created before this binding are + advertised to userspace without a one-to-one hwcap bit number may not specify + this bit. Operating system will handle those bits specifically. All new + features usable by userspace will have a hwcap-bit-nr property. + + +- dependencies + Usage: optional + Value type: + Definition: + + If this property exists then it is a list of phandles to cpu feature + nodes that must be enabled for this feature to be enabled. + + +Example +------- + + /cpus/ibm,powerpc-cpu-features { + compatible = "ibm,powerpc-cpu-features"; + + isa = <3020>; + + darn { + isa = <3000>; + usable-privilege = <1 | 2 | 4>; + hwcap-bit-nr = ; + }; + + scv { + isa = <3000>; + usable-privilege = <1 | 2>; + os-support = <0>; + hwcap-bit-nr = ; + }; + + stop { + isa = <3000>; + usable-privilege = <2 | 4>; + hv-support = <0>; + os-support = <0>; + }; + + vsx2 (hypothetical) { + isa = <3010>; + usable-privilege = <1 | 2 | 4>; + hv-support = <0>; + os-support = <0>; + hwcap-bit-nr = ; + }; + + vsx2-newinsns { + isa = <3020>; + usable-privilege = <1 | 2 | 4>; + os-support = <1>; + fscr-bit-nr = ; + hwcap-bit-nr = ; + dependencies = <&vsx2>; + }; + + }; diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 67ee6731f4e9..5bd868f2e813 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -380,6 +380,22 @@ source "arch/powerpc/platforms/Kconfig" menu "Kernel options" +config PPC_DT_CPU_FTRS + bool "Device-tree based CPU feature discovery & setup" + depends on PPC_BOOK3S_64 + default n + help + This enables code to use a new device tree binding for describing CPU + compatibility and features. Saying Y here will attempt to use the new + binding if the firmware provides it. Currently only the skiboot + firmware provides this binding. + If you're not sure say Y. + +config PPC_CPUFEATURES_ENABLE_UNKNOWN + bool "cpufeatures pass through unknown features to guest/userspace" + depends on PPC_DT_CPU_FTRS + default y + config HIGHMEM bool "High memory support" depends on PPC32 diff --git a/arch/powerpc/include/asm/cpu_has_feature.h b/arch/powerpc/include/asm/cpu_has_feature.h index 6e834caa3720..0d1df02bf99d 100644 --- a/arch/powerpc/include/asm/cpu_has_feature.h +++ b/arch/powerpc/include/asm/cpu_has_feature.h @@ -1,5 +1,5 @@ -#ifndef __ASM_POWERPC_CPUFEATURES_H -#define __ASM_POWERPC_CPUFEATURES_H +#ifndef __ASM_POWERPC_CPU_HAS_FEATURE_H +#define __ASM_POWERPC_CPU_HAS_FEATURE_H #ifndef __ASSEMBLY__ @@ -52,4 +52,4 @@ static inline bool cpu_has_feature(unsigned long feature) #endif #endif /* __ASSEMBLY__ */ -#endif /* __ASM_POWERPC_CPUFEATURE_H */ +#endif /* __ASM_POWERPC_CPU_HAS_FEATURE_H */ diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 1f6847b107e4..c2d509584a98 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -118,7 +118,9 @@ extern struct cpu_spec *cur_cpu_spec; extern unsigned int __start___ftr_fixup, __stop___ftr_fixup; +extern void set_cur_cpu_spec(struct cpu_spec *s); extern struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr); +extern void identify_cpu_name(unsigned int pvr); extern void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end); diff --git a/arch/powerpc/include/asm/dt_cpu_ftrs.h b/arch/powerpc/include/asm/dt_cpu_ftrs.h new file mode 100644 index 000000000000..7a34fc11bf63 --- /dev/null +++ b/arch/powerpc/include/asm/dt_cpu_ftrs.h @@ -0,0 +1,26 @@ +#ifndef __ASM_POWERPC_DT_CPU_FTRS_H +#define __ASM_POWERPC_DT_CPU_FTRS_H + +/* + * Copyright 2017, IBM Corporation + * cpufeatures is the new way to discover CPU features with /cpus/features + * devicetree. This supersedes PVR based discovery ("cputable"), and older + * device tree feature advertisement. + */ + +#include +#include +#include +#include + +#ifdef CONFIG_PPC_DT_CPU_FTRS +bool dt_cpu_ftrs_init(void *fdt); +void dt_cpu_ftrs_scan(void); +bool dt_cpu_ftrs_in_use(void); +#else +static inline bool dt_cpu_ftrs_init(void *fdt) { return false; } +static inline void dt_cpu_ftrs_scan(void) { } +static inline bool dt_cpu_ftrs_in_use(void) { return false; } +#endif + +#endif /* __ASM_POWERPC_DT_CPU_FTRS_H */ diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index d4f653c9259a..7e50e47375d6 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -1229,6 +1229,7 @@ #define PVR_POWER8E 0x004B #define PVR_POWER8NVL 0x004C #define PVR_POWER8 0x004D +#define PVR_POWER9 0x004E #define PVR_BE 0x0070 #define PVR_PA6T 0x0090 diff --git a/arch/powerpc/include/uapi/asm/cputable.h b/arch/powerpc/include/uapi/asm/cputable.h index f63c96cd3608..3e7ce86d5c13 100644 --- a/arch/powerpc/include/uapi/asm/cputable.h +++ b/arch/powerpc/include/uapi/asm/cputable.h @@ -47,4 +47,11 @@ #define PPC_FEATURE2_ARCH_3_00 0x00800000 /* ISA 3.00 */ #define PPC_FEATURE2_HAS_IEEE128 0x00400000 /* VSX IEEE Binary Float 128-bit */ +/* + * IMPORTANT! + * All future PPC_FEATURE definitions should be allocated in cooperation with + * OPAL / skiboot firmware, in accordance with the ibm,powerpc-cpu-features + * device tree binding. + */ + #endif /* _UAPI__ASM_POWERPC_CPUTABLE_H */ diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index b9db46ae545b..e132902e1f14 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_PPC_RTAS) += rtas.o rtas-rtc.o $(rtaspci-y-y) obj-$(CONFIG_PPC_RTAS_DAEMON) += rtasd.o obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o obj-$(CONFIG_RTAS_PROC) += rtas-proc.o +obj-$(CONFIG_PPC_DT_CPU_FTRS) += dt_cpu_ftrs.o obj-$(CONFIG_EEH) += eeh.o eeh_pe.o eeh_dev.o eeh_cache.o \ eeh_driver.o eeh_event.o eeh_sysfs.o obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index e79b9daa873c..9b3e88b1a9c8 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -23,7 +23,9 @@ #include #include -struct cpu_spec* cur_cpu_spec = NULL; +static struct cpu_spec the_cpu_spec __read_mostly; + +struct cpu_spec* cur_cpu_spec __read_mostly = NULL; EXPORT_SYMBOL(cur_cpu_spec); /* The platform string corresponding to the real PVR */ @@ -2179,7 +2181,15 @@ static struct cpu_spec __initdata cpu_specs[] = { #endif /* CONFIG_E500 */ }; -static struct cpu_spec the_cpu_spec; +void __init set_cur_cpu_spec(struct cpu_spec *s) +{ + struct cpu_spec *t = &the_cpu_spec; + + t = PTRRELOC(t); + *t = *s; + + *PTRRELOC(&cur_cpu_spec) = &the_cpu_spec; +} static struct cpu_spec * __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) @@ -2266,6 +2276,29 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr) return NULL; } +/* + * Used by cpufeatures to get the name for CPUs with a PVR table. + * If they don't hae a PVR table, cpufeatures gets the name from + * cpu device-tree node. + */ +void __init identify_cpu_name(unsigned int pvr) +{ + struct cpu_spec *s = cpu_specs; + struct cpu_spec *t = &the_cpu_spec; + int i; + + s = PTRRELOC(s); + t = PTRRELOC(t); + + for (i = 0; i < ARRAY_SIZE(cpu_specs); i++,s++) { + if ((pvr & s->pvr_mask) == s->pvr_value) { + t->cpu_name = s->cpu_name; + return; + } + } +} + + #ifdef CONFIG_JUMP_LABEL_FEATURE_CHECKS struct static_key_true cpu_feature_keys[NUM_CPU_FTR_KEYS] = { [0 ... NUM_CPU_FTR_KEYS - 1] = STATIC_KEY_TRUE_INIT diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c new file mode 100644 index 000000000000..fcc7588a96d6 --- /dev/null +++ b/arch/powerpc/kernel/dt_cpu_ftrs.c @@ -0,0 +1,1031 @@ +/* + * Copyright 2017, Nicholas Piggin, IBM Corporation + * Licensed under GPLv2. + */ + +#define pr_fmt(fmt) "dt-cpu-ftrs: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + + +/* Device-tree visible constants follow */ +#define ISA_V2_07B 2070 +#define ISA_V3_0B 3000 + +#define USABLE_PR (1U << 0) +#define USABLE_OS (1U << 1) +#define USABLE_HV (1U << 2) + +#define HV_SUPPORT_HFSCR (1U << 0) +#define OS_SUPPORT_FSCR (1U << 0) + +/* For parsing, we define all bits set as "NONE" case */ +#define HV_SUPPORT_NONE 0xffffffffU +#define OS_SUPPORT_NONE 0xffffffffU + +struct dt_cpu_feature { + const char *name; + uint32_t isa; + uint32_t usable_privilege; + uint32_t hv_support; + uint32_t os_support; + uint32_t hfscr_bit_nr; + uint32_t fscr_bit_nr; + uint32_t hwcap_bit_nr; + /* fdt parsing */ + unsigned long node; + int enabled; + int disabled; +}; + +#define CPU_FTRS_BASE \ + (CPU_FTR_USE_TB | \ + CPU_FTR_LWSYNC | \ + CPU_FTR_FPU_UNAVAILABLE |\ + CPU_FTR_NODSISRALIGN |\ + CPU_FTR_NOEXECUTE |\ + CPU_FTR_COHERENT_ICACHE | \ + CPU_FTR_STCX_CHECKS_ADDRESS |\ + CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ + CPU_FTR_DAWR | \ + CPU_FTR_ARCH_206 |\ + CPU_FTR_ARCH_207S) + +#define MMU_FTRS_HASH_BASE (MMU_FTRS_POWER8) + +#define COMMON_USER_BASE (PPC_FEATURE_32 | PPC_FEATURE_64 | \ + PPC_FEATURE_ARCH_2_06 |\ + PPC_FEATURE_ICACHE_SNOOP) +#define COMMON_USER2_BASE (PPC_FEATURE2_ARCH_2_07 | \ + PPC_FEATURE2_ISEL) +/* + * Set up the base CPU + */ + +extern void __flush_tlb_power8(unsigned int action); +extern void __flush_tlb_power9(unsigned int action); +extern long __machine_check_early_realmode_p8(struct pt_regs *regs); +extern long __machine_check_early_realmode_p9(struct pt_regs *regs); + +static int hv_mode; + +static struct { + u64 lpcr; + u64 hfscr; + u64 fscr; +} system_registers; + +static void (*init_pmu_registers)(void); + +static void cpufeatures_flush_tlb(void) +{ + unsigned long rb; + unsigned int i, num_sets; + + /* + * This is a temporary measure to keep equivalent TLB flush as the + * cputable based setup code. + */ + switch (PVR_VER(mfspr(SPRN_PVR))) { + case PVR_POWER8: + case PVR_POWER8E: + case PVR_POWER8NVL: + num_sets = POWER8_TLB_SETS; + break; + case PVR_POWER9: + num_sets = POWER9_TLB_SETS_HASH; + break; + default: + num_sets = 1; + pr_err("unknown CPU version for boot TLB flush\n"); + break; + } + + asm volatile("ptesync" : : : "memory"); + rb = TLBIEL_INVAL_SET; + for (i = 0; i < num_sets; i++) { + asm volatile("tlbiel %0" : : "r" (rb)); + rb += 1 << TLBIEL_INVAL_SET_SHIFT; + } + asm volatile("ptesync" : : : "memory"); +} + +static void __restore_cpu_cpufeatures(void) +{ + /* + * LPCR is restored by the power on engine already. It can be changed + * after early init e.g., by radix enable, and we have no unified API + * for saving and restoring such SPRs. + * + * This ->restore hook should really be removed from idle and register + * restore moved directly into the idle restore code, because this code + * doesn't know how idle is implemented or what it needs restored here. + * + * The best we can do to accommodate secondary boot and idle restore + * for now is "or" LPCR with existing. + */ + + mtspr(SPRN_LPCR, system_registers.lpcr | mfspr(SPRN_LPCR)); + if (hv_mode) { + mtspr(SPRN_LPID, 0); + mtspr(SPRN_HFSCR, system_registers.hfscr); + } + mtspr(SPRN_FSCR, system_registers.fscr); + + if (init_pmu_registers) + init_pmu_registers(); + + cpufeatures_flush_tlb(); +} + +static char dt_cpu_name[64]; + +static struct cpu_spec __initdata base_cpu_spec = { + .cpu_name = NULL, + .cpu_features = CPU_FTRS_BASE, + .cpu_user_features = COMMON_USER_BASE, + .cpu_user_features2 = COMMON_USER2_BASE, + .mmu_features = 0, + .icache_bsize = 32, /* minimum block size, fixed by */ + .dcache_bsize = 32, /* cache info init. */ + .num_pmcs = 0, + .pmc_type = PPC_PMC_DEFAULT, + .oprofile_cpu_type = NULL, + .oprofile_type = PPC_OPROFILE_INVALID, + .cpu_setup = NULL, + .cpu_restore = __restore_cpu_cpufeatures, + .flush_tlb = NULL, + .machine_check_early = NULL, + .platform = NULL, +}; + +static void __init cpufeatures_setup_cpu(void) +{ + set_cur_cpu_spec(&base_cpu_spec); + + cur_cpu_spec->pvr_mask = -1; + cur_cpu_spec->pvr_value = mfspr(SPRN_PVR); + + /* Initialize the base environment -- clear FSCR/HFSCR. */ + hv_mode = !!(mfmsr() & MSR_HV); + if (hv_mode) { + /* CPU_FTR_HVMODE is used early in PACA setup */ + cur_cpu_spec->cpu_features |= CPU_FTR_HVMODE; + mtspr(SPRN_HFSCR, 0); + } + mtspr(SPRN_FSCR, 0); + + /* + * LPCR does not get cleared, to match behaviour with secondaries + * in __restore_cpu_cpufeatures. Once the idle code is fixed, this + * could clear LPCR too. + */ +} + +static int __init feat_try_enable_unknown(struct dt_cpu_feature *f) +{ + if (f->hv_support == HV_SUPPORT_NONE) { + } else if (f->hv_support & HV_SUPPORT_HFSCR) { + u64 hfscr = mfspr(SPRN_HFSCR); + hfscr |= 1UL << f->hfscr_bit_nr; + mtspr(SPRN_HFSCR, hfscr); + } else { + /* Does not have a known recipe */ + return 0; + } + + if (f->os_support == OS_SUPPORT_NONE) { + } else if (f->os_support & OS_SUPPORT_FSCR) { + u64 fscr = mfspr(SPRN_FSCR); + fscr |= 1UL << f->fscr_bit_nr; + mtspr(SPRN_FSCR, fscr); + } else { + /* Does not have a known recipe */ + return 0; + } + + if ((f->usable_privilege & USABLE_PR) && (f->hwcap_bit_nr != -1)) { + uint32_t word = f->hwcap_bit_nr / 32; + uint32_t bit = f->hwcap_bit_nr % 32; + + if (word == 0) + cur_cpu_spec->cpu_user_features |= 1U << bit; + else if (word == 1) + cur_cpu_spec->cpu_user_features2 |= 1U << bit; + else + pr_err("%s could not advertise to user (no hwcap bits)\n", f->name); + } + + return 1; +} + +static int __init feat_enable(struct dt_cpu_feature *f) +{ + if (f->hv_support != HV_SUPPORT_NONE) { + if (f->hfscr_bit_nr != -1) { + u64 hfscr = mfspr(SPRN_HFSCR); + hfscr |= 1UL << f->hfscr_bit_nr; + mtspr(SPRN_HFSCR, hfscr); + } + } + + if (f->os_support != OS_SUPPORT_NONE) { + if (f->fscr_bit_nr != -1) { + u64 fscr = mfspr(SPRN_FSCR); + fscr |= 1UL << f->fscr_bit_nr; + mtspr(SPRN_FSCR, fscr); + } + } + + if ((f->usable_privilege & USABLE_PR) && (f->hwcap_bit_nr != -1)) { + uint32_t word = f->hwcap_bit_nr / 32; + uint32_t bit = f->hwcap_bit_nr % 32; + + if (word == 0) + cur_cpu_spec->cpu_user_features |= 1U << bit; + else if (word == 1) + cur_cpu_spec->cpu_user_features2 |= 1U << bit; + else + pr_err("CPU feature: %s could not advertise to user (no hwcap bits)\n", f->name); + } + + return 1; +} + +static int __init feat_disable(struct dt_cpu_feature *f) +{ + return 0; +} + +static int __init feat_enable_hv(struct dt_cpu_feature *f) +{ + u64 lpcr; + + if (!hv_mode) { + pr_err("CPU feature hypervisor present in device tree but HV mode not enabled in the CPU. Ignoring.\n"); + return 0; + } + + mtspr(SPRN_LPID, 0); + + lpcr = mfspr(SPRN_LPCR); + lpcr &= ~LPCR_LPES0; /* HV external interrupts */ + mtspr(SPRN_LPCR, lpcr); + + cur_cpu_spec->cpu_features |= CPU_FTR_HVMODE; + + return 1; +} + +static int __init feat_enable_le(struct dt_cpu_feature *f) +{ + cur_cpu_spec->cpu_user_features |= PPC_FEATURE_TRUE_LE; + return 1; +} + +static int __init feat_enable_smt(struct dt_cpu_feature *f) +{ + cur_cpu_spec->cpu_features |= CPU_FTR_SMT; + cur_cpu_spec->cpu_user_features |= PPC_FEATURE_SMT; + return 1; +} + +static int __init feat_enable_idle_nap(struct dt_cpu_feature *f) +{ + u64 lpcr; + + /* Set PECE wakeup modes for ISA 207 */ + lpcr = mfspr(SPRN_LPCR); + lpcr |= LPCR_PECE0; + lpcr |= LPCR_PECE1; + lpcr |= LPCR_PECE2; + mtspr(SPRN_LPCR, lpcr); + + return 1; +} + +static int __init feat_enable_align_dsisr(struct dt_cpu_feature *f) +{ + cur_cpu_spec->cpu_features &= ~CPU_FTR_NODSISRALIGN; + + return 1; +} + +static int __init feat_enable_idle_stop(struct dt_cpu_feature *f) +{ + u64 lpcr; + + /* Set PECE wakeup modes for ISAv3.0B */ + lpcr = mfspr(SPRN_LPCR); + lpcr |= LPCR_PECE0; + lpcr |= LPCR_PECE1; + lpcr |= LPCR_PECE2; + mtspr(SPRN_LPCR, lpcr); + + return 1; +} + +static int __init feat_enable_mmu_hash(struct dt_cpu_feature *f) +{ + u64 lpcr; + + lpcr = mfspr(SPRN_LPCR); + lpcr &= ~LPCR_ISL; + + /* VRMASD */ + lpcr |= LPCR_VPM0; + lpcr &= ~LPCR_VPM1; + lpcr |= 0x10UL << LPCR_VRMASD_SH; /* L=1 LP=00 */ + mtspr(SPRN_LPCR, lpcr); + + cur_cpu_spec->mmu_features |= MMU_FTRS_HASH_BASE; + cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_MMU; + + return 1; +} + +static int __init feat_enable_mmu_hash_v3(struct dt_cpu_feature *f) +{ + u64 lpcr; + + lpcr = mfspr(SPRN_LPCR); + lpcr &= ~LPCR_ISL; + mtspr(SPRN_LPCR, lpcr); + + cur_cpu_spec->mmu_features |= MMU_FTRS_HASH_BASE; + cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_MMU; + + return 1; +} + + +static int __init feat_enable_mmu_radix(struct dt_cpu_feature *f) +{ +#ifdef CONFIG_PPC_RADIX_MMU + cur_cpu_spec->mmu_features |= MMU_FTR_TYPE_RADIX; + cur_cpu_spec->mmu_features |= MMU_FTRS_HASH_BASE; + cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_MMU; + + return 1; +#endif + return 0; +} + +static int __init feat_enable_dscr(struct dt_cpu_feature *f) +{ + u64 lpcr; + + feat_enable(f); + + lpcr = mfspr(SPRN_LPCR); + lpcr &= ~LPCR_DPFD; + lpcr |= (4UL << LPCR_DPFD_SH); + mtspr(SPRN_LPCR, lpcr); + + return 1; +} + +static void hfscr_pmu_enable(void) +{ + u64 hfscr = mfspr(SPRN_HFSCR); + hfscr |= PPC_BIT(60); + mtspr(SPRN_HFSCR, hfscr); +} + +static void init_pmu_power8(void) +{ + if (hv_mode) { + mtspr(SPRN_MMCRC, 0); + mtspr(SPRN_MMCRH, 0); + } + + mtspr(SPRN_MMCRA, 0); + mtspr(SPRN_MMCR0, 0); + mtspr(SPRN_MMCR1, 0); + mtspr(SPRN_MMCR2, 0); + mtspr(SPRN_MMCRS, 0); +} + +static int __init feat_enable_mce_power8(struct dt_cpu_feature *f) +{ + cur_cpu_spec->platform = "power8"; + cur_cpu_spec->flush_tlb = __flush_tlb_power8; + cur_cpu_spec->machine_check_early = __machine_check_early_realmode_p8; + + return 1; +} + +static int __init feat_enable_pmu_power8(struct dt_cpu_feature *f) +{ + hfscr_pmu_enable(); + + init_pmu_power8(); + init_pmu_registers = init_pmu_power8; + + cur_cpu_spec->cpu_features |= CPU_FTR_MMCRA; + cur_cpu_spec->cpu_user_features |= PPC_FEATURE_PSERIES_PERFMON_COMPAT; + if (pvr_version_is(PVR_POWER8E)) + cur_cpu_spec->cpu_features |= CPU_FTR_PMAO_BUG; + + cur_cpu_spec->num_pmcs = 6; + cur_cpu_spec->pmc_type = PPC_PMC_IBM; + cur_cpu_spec->oprofile_cpu_type = "ppc64/power8"; + + return 1; +} + +static void init_pmu_power9(void) +{ + if (hv_mode) + mtspr(SPRN_MMCRC, 0); + + mtspr(SPRN_MMCRA, 0); + mtspr(SPRN_MMCR0, 0); + mtspr(SPRN_MMCR1, 0); + mtspr(SPRN_MMCR2, 0); +} + +static int __init feat_enable_mce_power9(struct dt_cpu_feature *f) +{ + cur_cpu_spec->platform = "power9"; + cur_cpu_spec->flush_tlb = __flush_tlb_power9; + cur_cpu_spec->machine_check_early = __machine_check_early_realmode_p9; + + return 1; +} + +static int __init feat_enable_pmu_power9(struct dt_cpu_feature *f) +{ + hfscr_pmu_enable(); + + init_pmu_power9(); + init_pmu_registers = init_pmu_power9; + + cur_cpu_spec->cpu_features |= CPU_FTR_MMCRA; + cur_cpu_spec->cpu_user_features |= PPC_FEATURE_PSERIES_PERFMON_COMPAT; + + cur_cpu_spec->num_pmcs = 6; + cur_cpu_spec->pmc_type = PPC_PMC_IBM; + cur_cpu_spec->oprofile_cpu_type = "ppc64/power9"; + + return 1; +} + +static int __init feat_enable_tm(struct dt_cpu_feature *f) +{ +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + feat_enable(f); + cur_cpu_spec->cpu_user_features2 |= PPC_FEATURE2_HTM_NOSC; + return 1; +#endif + return 0; +} + +static int __init feat_enable_fp(struct dt_cpu_feature *f) +{ + feat_enable(f); + cur_cpu_spec->cpu_features &= ~CPU_FTR_FPU_UNAVAILABLE; + + return 1; +} + +static int __init feat_enable_vector(struct dt_cpu_feature *f) +{ +#ifdef CONFIG_ALTIVEC + feat_enable(f); + cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC; + cur_cpu_spec->cpu_features |= CPU_FTR_VMX_COPY; + cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; + + return 1; +#endif + return 0; +} + +static int __init feat_enable_vsx(struct dt_cpu_feature *f) +{ +#ifdef CONFIG_VSX + feat_enable(f); + cur_cpu_spec->cpu_features |= CPU_FTR_VSX; + cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_VSX; + + return 1; +#endif + return 0; +} + +static int __init feat_enable_purr(struct dt_cpu_feature *f) +{ + cur_cpu_spec->cpu_features |= CPU_FTR_PURR | CPU_FTR_SPURR; + + return 1; +} + +static int __init feat_enable_ebb(struct dt_cpu_feature *f) +{ + /* + * PPC_FEATURE2_EBB is enabled in PMU init code because it has + * historically been related to the PMU facility. This may have + * to be decoupled if EBB becomes more generic. For now, follow + * existing convention. + */ + f->hwcap_bit_nr = -1; + feat_enable(f); + + return 1; +} + +static int __init feat_enable_dbell(struct dt_cpu_feature *f) +{ + u64 lpcr; + + /* P9 has an HFSCR for privileged state */ + feat_enable(f); + + cur_cpu_spec->cpu_features |= CPU_FTR_DBELL; + + lpcr = mfspr(SPRN_LPCR); + lpcr |= LPCR_PECEDH; /* hyp doorbell wakeup */ + mtspr(SPRN_LPCR, lpcr); + + return 1; +} + +static int __init feat_enable_hvi(struct dt_cpu_feature *f) +{ + u64 lpcr; + + /* + * POWER9 XIVE interrupts including in OPAL XICS compatibility + * are always delivered as hypervisor virtualization interrupts (HVI) + * rather than EE. + * + * However LPES0 is not set here, in the chance that an EE does get + * delivered to the host somehow, the EE handler would not expect it + * to be delivered in LPES0 mode (e.g., using SRR[01]). This could + * happen if there is a bug in interrupt controller code, or IC is + * misconfigured in systemsim. + */ + + lpcr = mfspr(SPRN_LPCR); + lpcr |= LPCR_HVICE; /* enable hvi interrupts */ + lpcr |= LPCR_HEIC; /* disable ee interrupts when MSR_HV */ + lpcr |= LPCR_PECE_HVEE; /* hvi can wake from stop */ + mtspr(SPRN_LPCR, lpcr); + + return 1; +} + +static int __init feat_enable_large_ci(struct dt_cpu_feature *f) +{ + cur_cpu_spec->mmu_features |= MMU_FTR_CI_LARGE_PAGE; + + return 1; +} + +struct dt_cpu_feature_match { + const char *name; + int (*enable)(struct dt_cpu_feature *f); + u64 cpu_ftr_bit_mask; +}; + +static struct dt_cpu_feature_match __initdata + dt_cpu_feature_match_table[] = { + {"hypervisor", feat_enable_hv, 0}, + {"big-endian", feat_enable, 0}, + {"little-endian", feat_enable_le, CPU_FTR_REAL_LE}, + {"smt", feat_enable_smt, 0}, + {"interrupt-facilities", feat_enable, 0}, + {"timer-facilities", feat_enable, 0}, + {"timer-facilities-v3", feat_enable, 0}, + {"debug-facilities", feat_enable, 0}, + {"come-from-address-register", feat_enable, CPU_FTR_CFAR}, + {"branch-tracing", feat_enable, 0}, + {"floating-point", feat_enable_fp, 0}, + {"vector", feat_enable_vector, 0}, + {"vector-scalar", feat_enable_vsx, 0}, + {"vector-scalar-v3", feat_enable, 0}, + {"decimal-floating-point", feat_enable, 0}, + {"decimal-integer", feat_enable, 0}, + {"quadword-load-store", feat_enable, 0}, + {"vector-crypto", feat_enable, 0}, + {"mmu-hash", feat_enable_mmu_hash, 0}, + {"mmu-radix", feat_enable_mmu_radix, 0}, + {"mmu-hash-v3", feat_enable_mmu_hash_v3, 0}, + {"virtual-page-class-key-protection", feat_enable, 0}, + {"transactional-memory", feat_enable_tm, CPU_FTR_TM}, + {"transactional-memory-v3", feat_enable_tm, 0}, + {"idle-nap", feat_enable_idle_nap, 0}, + {"alignment-interrupt-dsisr", feat_enable_align_dsisr, 0}, + {"idle-stop", feat_enable_idle_stop, 0}, + {"machine-check-power8", feat_enable_mce_power8, 0}, + {"performance-monitor-power8", feat_enable_pmu_power8, 0}, + {"data-stream-control-register", feat_enable_dscr, CPU_FTR_DSCR}, + {"event-based-branch", feat_enable_ebb, 0}, + {"target-address-register", feat_enable, 0}, + {"branch-history-rolling-buffer", feat_enable, 0}, + {"control-register", feat_enable, CPU_FTR_CTRL}, + {"processor-control-facility", feat_enable_dbell, CPU_FTR_DBELL}, + {"processor-control-facility-v3", feat_enable_dbell, CPU_FTR_DBELL}, + {"processor-utilization-of-resources-register", feat_enable_purr, 0}, + {"subcore", feat_enable, CPU_FTR_SUBCORE}, + {"no-execute", feat_enable, 0}, + {"strong-access-ordering", feat_enable, CPU_FTR_SAO}, + {"cache-inhibited-large-page", feat_enable_large_ci, 0}, + {"coprocessor-icswx", feat_enable, CPU_FTR_ICSWX}, + {"hypervisor-virtualization-interrupt", feat_enable_hvi, 0}, + {"program-priority-register", feat_enable, CPU_FTR_HAS_PPR}, + {"wait", feat_enable, 0}, + {"atomic-memory-operations", feat_enable, 0}, + {"branch-v3", feat_enable, 0}, + {"copy-paste", feat_enable, 0}, + {"decimal-floating-point-v3", feat_enable, 0}, + {"decimal-integer-v3", feat_enable, 0}, + {"fixed-point-v3", feat_enable, 0}, + {"floating-point-v3", feat_enable, 0}, + {"group-start-register", feat_enable, 0}, + {"pc-relative-addressing", feat_enable, 0}, + {"machine-check-power9", feat_enable_mce_power9, 0}, + {"performance-monitor-power9", feat_enable_pmu_power9, 0}, + {"event-based-branch-v3", feat_enable, 0}, + {"random-number-generator", feat_enable, 0}, + {"system-call-vectored", feat_disable, 0}, + {"trace-interrupt-v3", feat_enable, 0}, + {"vector-v3", feat_enable, 0}, + {"vector-binary128", feat_enable, 0}, + {"vector-binary16", feat_enable, 0}, + {"wait-v3", feat_enable, 0}, +}; + +/* XXX: how to configure this? Default + boot time? */ +#ifdef CONFIG_PPC_CPUFEATURES_ENABLE_UNKNOWN +#define CPU_FEATURE_ENABLE_UNKNOWN 1 +#else +#define CPU_FEATURE_ENABLE_UNKNOWN 0 +#endif + +static void __init cpufeatures_setup_start(u32 isa) +{ + pr_info("setup for ISA %d\n", isa); + + if (isa >= 3000) { + cur_cpu_spec->cpu_features |= CPU_FTR_ARCH_300; + cur_cpu_spec->cpu_user_features2 |= PPC_FEATURE2_ARCH_3_00; + } +} + +static bool __init cpufeatures_process_feature(struct dt_cpu_feature *f) +{ + const struct dt_cpu_feature_match *m; + bool known = false; + int i; + + for (i = 0; i < ARRAY_SIZE(dt_cpu_feature_match_table); i++) { + m = &dt_cpu_feature_match_table[i]; + if (!strcmp(f->name, m->name)) { + known = true; + if (m->enable(f)) + break; + + pr_info("not enabling: %s (disabled or unsupported by kernel)\n", + f->name); + return false; + } + } + + if (!known && CPU_FEATURE_ENABLE_UNKNOWN) { + if (!feat_try_enable_unknown(f)) { + pr_info("not enabling: %s (unknown and unsupported by kernel)\n", + f->name); + return false; + } + } + + if (m->cpu_ftr_bit_mask) + cur_cpu_spec->cpu_features |= m->cpu_ftr_bit_mask; + + if (known) + pr_debug("enabling: %s\n", f->name); + else + pr_debug("enabling: %s (unknown)\n", f->name); + + return true; +} + +static __init void cpufeatures_cpu_quirks(void) +{ + int version = mfspr(SPRN_PVR); + + /* + * Not all quirks can be derived from the cpufeatures device tree. + */ + if ((version & 0xffffff00) == 0x004e0100) + cur_cpu_spec->cpu_features |= CPU_FTR_POWER9_DD1; +} + +static void __init cpufeatures_setup_finished(void) +{ + cpufeatures_cpu_quirks(); + + if (hv_mode && !(cur_cpu_spec->cpu_features & CPU_FTR_HVMODE)) { + pr_err("hypervisor not present in device tree but HV mode is enabled in the CPU. Enabling.\n"); + cur_cpu_spec->cpu_features |= CPU_FTR_HVMODE; + } + + system_registers.lpcr = mfspr(SPRN_LPCR); + system_registers.hfscr = mfspr(SPRN_HFSCR); + system_registers.fscr = mfspr(SPRN_FSCR); + + cpufeatures_flush_tlb(); + + pr_info("final cpu/mmu features = 0x%016lx 0x%08x\n", + cur_cpu_spec->cpu_features, cur_cpu_spec->mmu_features); +} + +static int __init fdt_find_cpu_features(unsigned long node, const char *uname, + int depth, void *data) +{ + if (of_flat_dt_is_compatible(node, "ibm,powerpc-cpu-features") + && of_get_flat_dt_prop(node, "isa", NULL)) + return 1; + + return 0; +} + +static bool __initdata using_dt_cpu_ftrs = false; + +bool __init dt_cpu_ftrs_in_use(void) +{ + return using_dt_cpu_ftrs; +} + +bool __init dt_cpu_ftrs_init(void *fdt) +{ + /* Setup and verify the FDT, if it fails we just bail */ + if (!early_init_dt_verify(fdt)) + return false; + + if (!of_scan_flat_dt(fdt_find_cpu_features, NULL)) + return false; + + cpufeatures_setup_cpu(); + + using_dt_cpu_ftrs = true; + return true; +} + +static int nr_dt_cpu_features; +static struct dt_cpu_feature *dt_cpu_features; + +static int __init process_cpufeatures_node(unsigned long node, + const char *uname, int i) +{ + const __be32 *prop; + struct dt_cpu_feature *f; + int len; + + f = &dt_cpu_features[i]; + memset(f, 0, sizeof(struct dt_cpu_feature)); + + f->node = node; + + f->name = uname; + + prop = of_get_flat_dt_prop(node, "isa", &len); + if (!prop) { + pr_warn("%s: missing isa property\n", uname); + return 0; + } + f->isa = be32_to_cpup(prop); + + prop = of_get_flat_dt_prop(node, "usable-privilege", &len); + if (!prop) { + pr_warn("%s: missing usable-privilege property", uname); + return 0; + } + f->usable_privilege = be32_to_cpup(prop); + + prop = of_get_flat_dt_prop(node, "hv-support", &len); + if (prop) + f->hv_support = be32_to_cpup(prop); + else + f->hv_support = HV_SUPPORT_NONE; + + prop = of_get_flat_dt_prop(node, "os-support", &len); + if (prop) + f->os_support = be32_to_cpup(prop); + else + f->os_support = OS_SUPPORT_NONE; + + prop = of_get_flat_dt_prop(node, "hfscr-bit-nr", &len); + if (prop) + f->hfscr_bit_nr = be32_to_cpup(prop); + else + f->hfscr_bit_nr = -1; + prop = of_get_flat_dt_prop(node, "fscr-bit-nr", &len); + if (prop) + f->fscr_bit_nr = be32_to_cpup(prop); + else + f->fscr_bit_nr = -1; + prop = of_get_flat_dt_prop(node, "hwcap-bit-nr", &len); + if (prop) + f->hwcap_bit_nr = be32_to_cpup(prop); + else + f->hwcap_bit_nr = -1; + + if (f->usable_privilege & USABLE_HV) { + if (!(mfmsr() & MSR_HV)) { + pr_warn("%s: HV feature passed to guest\n", uname); + return 0; + } + + if (f->hv_support == HV_SUPPORT_NONE && f->hfscr_bit_nr != -1) { + pr_warn("%s: unwanted hfscr_bit_nr\n", uname); + return 0; + } + + if (f->hv_support == HV_SUPPORT_HFSCR) { + if (f->hfscr_bit_nr == -1) { + pr_warn("%s: missing hfscr_bit_nr\n", uname); + return 0; + } + } + } else { + if (f->hv_support != HV_SUPPORT_NONE || f->hfscr_bit_nr != -1) { + pr_warn("%s: unwanted hv_support/hfscr_bit_nr\n", uname); + return 0; + } + } + + if (f->usable_privilege & USABLE_OS) { + if (f->os_support == OS_SUPPORT_NONE && f->fscr_bit_nr != -1) { + pr_warn("%s: unwanted fscr_bit_nr\n", uname); + return 0; + } + + if (f->os_support == OS_SUPPORT_FSCR) { + if (f->fscr_bit_nr == -1) { + pr_warn("%s: missing fscr_bit_nr\n", uname); + return 0; + } + } + } else { + if (f->os_support != OS_SUPPORT_NONE || f->fscr_bit_nr != -1) { + pr_warn("%s: unwanted os_support/fscr_bit_nr\n", uname); + return 0; + } + } + + if (!(f->usable_privilege & USABLE_PR)) { + if (f->hwcap_bit_nr != -1) { + pr_warn("%s: unwanted hwcap_bit_nr\n", uname); + return 0; + } + } + + /* Do all the independent features in the first pass */ + if (!of_get_flat_dt_prop(node, "dependencies", &len)) { + if (cpufeatures_process_feature(f)) + f->enabled = 1; + else + f->disabled = 1; + } + + return 0; +} + +static void __init cpufeatures_deps_enable(struct dt_cpu_feature *f) +{ + const __be32 *prop; + int len; + int nr_deps; + int i; + + if (f->enabled || f->disabled) + return; + + prop = of_get_flat_dt_prop(f->node, "dependencies", &len); + if (!prop) { + pr_warn("%s: missing dependencies property", f->name); + return; + } + + nr_deps = len / sizeof(int); + + for (i = 0; i < nr_deps; i++) { + unsigned long phandle = be32_to_cpu(prop[i]); + int j; + + for (j = 0; j < nr_dt_cpu_features; j++) { + struct dt_cpu_feature *d = &dt_cpu_features[j]; + + if (of_get_flat_dt_phandle(d->node) == phandle) { + cpufeatures_deps_enable(d); + if (d->disabled) { + f->disabled = 1; + return; + } + } + } + } + + if (cpufeatures_process_feature(f)) + f->enabled = 1; + else + f->disabled = 1; +} + +static int __init scan_cpufeatures_subnodes(unsigned long node, + const char *uname, + void *data) +{ + int *count = data; + + process_cpufeatures_node(node, uname, *count); + + (*count)++; + + return 0; +} + +static int __init count_cpufeatures_subnodes(unsigned long node, + const char *uname, + void *data) +{ + int *count = data; + + (*count)++; + + return 0; +} + +static int __init dt_cpu_ftrs_scan_callback(unsigned long node, const char + *uname, int depth, void *data) +{ + const __be32 *prop; + int count, i; + u32 isa; + + /* We are scanning "ibm,powerpc-cpu-features" nodes only */ + if (!of_flat_dt_is_compatible(node, "ibm,powerpc-cpu-features")) + return 0; + + prop = of_get_flat_dt_prop(node, "isa", NULL); + if (!prop) + /* We checked before, "can't happen" */ + return 0; + + isa = be32_to_cpup(prop); + + /* Count and allocate space for cpu features */ + of_scan_flat_dt_subnodes(node, count_cpufeatures_subnodes, + &nr_dt_cpu_features); + dt_cpu_features = __va( + memblock_alloc(sizeof(struct dt_cpu_feature)* + nr_dt_cpu_features, PAGE_SIZE)); + + cpufeatures_setup_start(isa); + + /* Scan nodes into dt_cpu_features and enable those without deps */ + count = 0; + of_scan_flat_dt_subnodes(node, scan_cpufeatures_subnodes, &count); + + /* Recursive enable remaining features with dependencies */ + for (i = 0; i < nr_dt_cpu_features; i++) { + struct dt_cpu_feature *f = &dt_cpu_features[i]; + + cpufeatures_deps_enable(f); + } + + prop = of_get_flat_dt_prop(node, "display-name", NULL); + if (prop && strlen((char *)prop) != 0) { + strlcpy(dt_cpu_name, (char *)prop, sizeof(dt_cpu_name)); + cur_cpu_spec->cpu_name = dt_cpu_name; + } + + cpufeatures_setup_finished(); + + memblock_free(__pa(dt_cpu_features), + sizeof(struct dt_cpu_feature)*nr_dt_cpu_features); + + return 0; +} + +void __init dt_cpu_ftrs_scan(void) +{ + of_scan_flat_dt(dt_cpu_ftrs_scan_callback, NULL); +} diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index d2f0afeae5a0..40c4887c27b6 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -57,6 +57,7 @@ #include #include #include +#include #include @@ -375,23 +376,31 @@ static int __init early_init_dt_scan_cpus(unsigned long node, * A POWER6 partition in "POWER6 architected" mode * uses the 0x0f000002 PVR value; in POWER5+ mode * it uses 0x0f000001. + * + * If we're using device tree CPU feature discovery then we don't + * support the cpu-version property, and it's the responsibility of the + * firmware/hypervisor to provide the correct feature set for the + * architecture level via the ibm,powerpc-cpu-features binding. */ - prop = of_get_flat_dt_prop(node, "cpu-version", NULL); - if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000) - identify_cpu(0, be32_to_cpup(prop)); + if (!dt_cpu_ftrs_in_use()) { + prop = of_get_flat_dt_prop(node, "cpu-version", NULL); + if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000) + identify_cpu(0, be32_to_cpup(prop)); - identical_pvr_fixup(node); + check_cpu_feature_properties(node); + check_cpu_pa_features(node); + } - check_cpu_feature_properties(node); - check_cpu_pa_features(node); + identical_pvr_fixup(node); init_mmu_slb_size(node); #ifdef CONFIG_PPC64 - if (nthreads > 1) - cur_cpu_spec->cpu_features |= CPU_FTR_SMT; - else + if (nthreads == 1) cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT; + else if (!dt_cpu_ftrs_in_use()) + cur_cpu_spec->cpu_features |= CPU_FTR_SMT; #endif + return 0; } @@ -721,6 +730,8 @@ void __init early_init_devtree(void *params) DBG("Scanning CPUs ...\n"); + dt_cpu_ftrs_scan(); + /* Retrieve CPU related informations from the flat tree * (altivec support, boot CPU ID, ...) */ diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 0f7b15860a06..1bf8978ec8da 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -49,6 +49,7 @@ #include #include #include +#include #include #include #include @@ -265,8 +266,10 @@ void __init early_setup(unsigned long dt_ptr) /* -------- printk is _NOT_ safe to use here ! ------- */ - /* Identify CPU type */ - identify_cpu(0, mfspr(SPRN_PVR)); + /* Try new device tree based feature discovery ... */ + if (!dt_cpu_ftrs_init(__va(dt_ptr))) + /* Otherwise use the old style CPU table */ + identify_cpu(0, mfspr(SPRN_PVR)); /* Assume we're on cpu 0 for now. Don't write to the paca yet! */ initialise_paca(&boot_paca, 0); @@ -532,6 +535,9 @@ void __init initialize_cache_info(void) dcache_bsize = ppc64_caches.l1d.block_size; icache_bsize = ppc64_caches.l1i.block_size; + cur_cpu_spec->dcache_bsize = dcache_bsize; + cur_cpu_spec->icache_bsize = icache_bsize; + DBG(" <- initialize_cache_info()\n"); } -- cgit v1.2.3