From 80766f87263c527b6c66a297e8d9c1d961d37eba Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sun, 18 Aug 2019 18:23:41 +0200 Subject: dt-bindings: bcm2835-cprman: Add bcm2711 support The new BCM2711 supports an additional clock for the emmc2 block. So we need an additional compatible. Signed-off-by: Stefan Wahren Acked-by: Eric Anholt Reviewed-by: Eric Anholt --- Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt index dd906db34b32..9e0b03a6519b 100644 --- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt +++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt @@ -12,7 +12,9 @@ clock generators, but a few (like the ARM or HDMI) will source from the PLL dividers directly. Required properties: -- compatible: Should be "brcm,bcm2835-cprman" +- compatible: should be one of the following, + "brcm,bcm2711-cprman" + "brcm,bcm2835-cprman" - #clock-cells: Should be <1>. The permitted clock-specifier values can be found in include/dt-bindings/clock/bcm2835.h - reg: Specifies base physical address and size of the registers -- cgit v1.2.3