From 4590d62cb16bebdc36b951067eeeaef02ea213c3 Mon Sep 17 00:00:00 2001 From: Marcus Folkesson Date: Sun, 11 Feb 2018 21:08:46 +0100 Subject: watchdog: meson: allow setting timeout in devicetree watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. By following best practice described in Documentation/watchdog/watchdog-kernel-api.txt, it also let us to set timout-sec property in devicetree. Signed-off-by: Marcus Folkesson Reviewed-by: Guenter Roeck Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- Documentation/devicetree/bindings/watchdog/meson-wdt.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation/devicetree/bindings/watchdog') diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt index 8a6d84cb36c9..7588cc3971bf 100644 --- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt @@ -9,9 +9,13 @@ Required properties: "amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs - reg : Specifies base physical address and size of the registers. +Optional properties: +- timeout-sec: contains the watchdog timeout in seconds. + Example: wdt: watchdog@c1109900 { compatible = "amlogic,meson6-wdt"; reg = <0xc1109900 0x8>; + timeout-sec = <10>; }; -- cgit v1.2.3