From 457c25efc592bb5539e18161c505f7a865013fb7 Mon Sep 17 00:00:00 2001 From: Oder Chiou Date: Mon, 18 Sep 2017 18:14:26 +0800 Subject: ASoC: rt5663: Add the function of impedance sensing Support the function of impedance sensing. It could be set the matrix row number of the impedance sensing table and the related parameters in the DTS. Signed-off-by: Oder Chiou Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/rt5663.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt index ff381718c517..497bcfc58b71 100644 --- a/Documentation/devicetree/bindings/sound/rt5663.txt +++ b/Documentation/devicetree/bindings/sound/rt5663.txt @@ -19,6 +19,22 @@ Optional properties: Based on the different PCB layout, add the manual offset value to compensate the DC offset for each L and R channel, and they are different between headphone and headset. +- "realtek,impedance_sensing_num" + The matrix row number of the impedance sensing table. + If the value is 0, it means the impedance sensing is not supported. +- "realtek,impedance_sensing_table" + The matrix rows of the impedance sensing table are consisted by impedance + minimum, impedance maximun, volume, DC offset w/o and w/ mic of each L and + R channel accordingly. Example is shown as following. + < 0 300 7 0xffd160 0xffd1c0 0xff8a10 0xff8ab0 + 301 65535 4 0xffe470 0xffe470 0xffb8e0 0xffb8e0> + The first and second column are defined for the impedance range. If the + detected impedance value is in the range, then the volume value of the + third column will be set to codec. In our codec design, each volume value + should compensate different DC offset to avoid the pop sound, and it is + also different between headphone and headset. In the example, the + "realtek,impedance_sensing_num" is 2. It means that there are 2 ranges of + impedance in the impedance sensing function. Pins on the device (for linking into audio routes) for RT5663: -- cgit v1.2.3 From d6604145dfccc3dd9e882dd3d6bd2545c9ff64e9 Mon Sep 17 00:00:00 2001 From: Jeffy Chen Date: Mon, 18 Sep 2017 19:14:34 +0800 Subject: ASoC: rt5514: Add devicetree binding support for rt5514-spi Add devicetree binding support for rt5514 spi dsp codec. Signed-off-by: Jeffy Chen Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/rt5514.txt | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt index 929ca6756b02..4f33b0d96afe 100644 --- a/Documentation/devicetree/bindings/sound/rt5514.txt +++ b/Documentation/devicetree/bindings/sound/rt5514.txt @@ -1,22 +1,27 @@ RT5514 audio CODEC -This device supports I2C only. +This device supports both I2C and SPI. Required properties: - compatible : "realtek,rt5514". -- reg : The I2C address of the device. +- reg : the I2C address of the device for I2C, the chip select + number for SPI. Optional properties: - clocks: The phandle of the master clock to the CODEC - clock-names: Should be "mclk" +- interrupt-parent: The phandle for the interrupt controller. +- interrupts: The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. + - realtek,dmic-init-delay-ms - Set the DMIC initial delay (ms) to wait it ready. + Set the DMIC initial delay (ms) to wait it ready for I2C. -Pins on the device (for linking into audio routes) for RT5514: +Pins on the device (for linking into audio routes) for I2C: * DMIC1L * DMIC1R -- cgit v1.2.3 From 9fda3b428a74339e358d4b0850427fa1ce1b4714 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 4 Sep 2017 16:41:50 +0100 Subject: ASoC: arizona: Add audio device tree bindings In keeping with the style of the rest of this drivers device tree bindings split the audio device tree bindings into their own document. It should be noted this patch makes no change to the binding itself just moves the documentation into a specific file for the audio binding. For easy of merging a separate patch removes the current documentation from the MFD binding documentation. Signed-off-by: Charles Keepax Acked-by: Rob Herring Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/wlf,arizona.txt | 49 ++++++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 50 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/wlf,arizona.txt (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.txt b/Documentation/devicetree/bindings/sound/wlf,arizona.txt new file mode 100644 index 000000000000..4e67224488d8 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,arizona.txt @@ -0,0 +1,49 @@ +Cirrus Logic Arizona class audio SoCs + +These devices are audio SoCs with extensive digital capabilities and a range +of analogue I/O. + +This document lists sound specific bindings, see the primary binding +document: + ../mfd/arizona.txt + +Optional properties: + + - wlf,inmode : A list of INn_MODE register values, where n is the number + of input signals. Valid values are 0 (Differential), 1 (Single-ended) and + 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default. + If present, values must be specified less than or equal to the number of + input signals. If values less than the number of input signals, elements + that have not been specified are set to 0 by default. Entries are: + (wm5102, wm5110, wm8280, wm8997) + (wm8998, wm1814) + - wlf,out-mono : A list of boolean values indicating whether each output is + mono or stereo. Position within the list indicates the output affected + (eg. First entry in the list corresponds to output 1). A non-zero value + indicates a mono output. If present, the number of values should be less + than or equal to the number of outputs, if less values are supplied the + additional outputs will be treated as stereo. + + - wlf,dmic-ref : DMIC reference voltage source for each input, can be + selected from either MICVDD or one of the MICBIAS's, defines + (ARIZONA_DMIC_xxxx) are provided in . If + present, the number of values should be less than or equal to the + number of inputs, unspecified inputs will use the chip default. + + - wlf,max-channels-clocked : The maximum number of channels to be clocked on + each AIF, useful for I2S systems with multiple data lines being mastered. + Specify one cell for each AIF to be configured, specify zero for AIFs that + should be handled normally. + If present, number of cells must be less than or equal to the number of + AIFs. If less than the number of AIFs, for cells that have not been + specified the corresponding AIFs will be treated as default setting. + + - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6). + See the datasheet for values. + The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, + wm8998, wm1814) + + - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6). + See the datasheet for values. + The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, + wm8998, wm1814) diff --git a/MAINTAINERS b/MAINTAINERS index 2281af4b41b6..5824962f419f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14575,6 +14575,7 @@ F: Documentation/devicetree/bindings/extcon/extcon-arizona.txt F: Documentation/devicetree/bindings/regulator/arizona-regulator.txt F: Documentation/devicetree/bindings/mfd/arizona.txt F: Documentation/devicetree/bindings/mfd/wm831x.txt +F: Documentation/devicetree/bindings/sound/wlf,arizona.txt F: arch/arm/mach-s3c64xx/mach-crag6410* F: drivers/clk/clk-wm83*.c F: drivers/extcon/extcon-arizona.c -- cgit v1.2.3 From 3d345b5f7b2f613b6965fc3fc68de9f439752ffe Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 19 Sep 2017 19:59:04 -0300 Subject: ASoC: tfa9879: Add device tree bindings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Even though the tfa9879 driver can probe via device tree trough the I2C core code, it is preferable to have explicit device tree bindings instead [1], so add this support. [1] https://www.spinics.net/lists/devicetree/msg195176.html Signed-off-by: Fabio Estevam Reviewed-by: Łukasz Majewski Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/tfa9879.txt | 23 ++++++++++++++++++++++ sound/soc/codecs/tfa9879.c | 6 ++++++ 2 files changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tfa9879.txt (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/tfa9879.txt b/Documentation/devicetree/bindings/sound/tfa9879.txt new file mode 100644 index 000000000000..23ba522d9e2b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tfa9879.txt @@ -0,0 +1,23 @@ +NXP TFA9879 class-D audio amplifier + +Required properties: + +- compatible : "nxp,tfa9879" + +- reg : the I2C address of the device + +Example: + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: tfa9879@6c { + #sound-dai-cells = <0>; + compatible = "nxp,tfa9879"; + reg = <0x6c>; + }; +}; + diff --git a/sound/soc/codecs/tfa9879.c b/sound/soc/codecs/tfa9879.c index 95e0a7abeb7a..f8dd67ca0744 100644 --- a/sound/soc/codecs/tfa9879.c +++ b/sound/soc/codecs/tfa9879.c @@ -312,9 +312,15 @@ static const struct i2c_device_id tfa9879_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, tfa9879_i2c_id); +static const struct of_device_id tfa9879_of_match[] = { + { .compatible = "nxp,tfa9879", }, + { } +}; + static struct i2c_driver tfa9879_i2c_driver = { .driver = { .name = "tfa9879", + .of_match_table = tfa9879_of_match, }, .probe = tfa9879_i2c_probe, .remove = tfa9879_i2c_remove, -- cgit v1.2.3 From 0340afe74d43e9c82bc0f5904d8f5b99d0fc3ab0 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 4 Sep 2017 16:41:54 +0100 Subject: ASoC: arizona: Add device tree binding doc for volume limits Signed-off-by: Charles Keepax Acked-by: Rob Herring Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/wlf,arizona.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.txt b/Documentation/devicetree/bindings/sound/wlf,arizona.txt index 4e67224488d8..e172c62dc2df 100644 --- a/Documentation/devicetree/bindings/sound/wlf,arizona.txt +++ b/Documentation/devicetree/bindings/sound/wlf,arizona.txt @@ -47,3 +47,7 @@ Optional properties: See the datasheet for values. The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, wm8998, wm1814) + + - wlf,out-volume-limit : The volume limit value that should be applied to each + output channel. See the datasheet for exact values. Channels are specified + in the order OUT1L, OUT1R, OUT2L, OUT2R, etc. -- cgit v1.2.3 From 14f0e5f8d97e632695d92f41f2e91d10d8005d47 Mon Sep 17 00:00:00 2001 From: Olivier Moysan Date: Thu, 19 Oct 2017 15:03:17 +0200 Subject: ASoC: stm32: Add synchronization to SAI bindings Add synchronization configuration to STM32 SAI bindings. This patch also adds peripheral clock which is required to access synchronization register. Signed-off-by: Olivier Moysan Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/st,stm32-sai.txt | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt index f1c5ae59e7c9..1f9cd7095337 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt @@ -10,13 +10,21 @@ Required properties: - reg: Base address and size of SAI common register set. - clocks: Must contain phandle and clock specifier pairs for each entry in clock-names. - - clock-names: Must contain "x8k" and "x11k" + - clock-names: Must contain "pclk" "x8k" and "x11k" + "pclk": Clock which feeds the peripheral bus interface. + Mandatory for "st,stm32h7-sai" compatible. + Not used for "st,stm32f4-sai" compatible. "x8k": SAI parent clock for sampling rates multiple of 8kHz. "x11k": SAI parent clock for sampling rates multiple of 11.025kHz. - interrupts: cpu DAI interrupt line shared by SAI sub-blocks Optional properties: - resets: Reference to a reset controller asserting the SAI + - st,sync: specify synchronization mode. + By default SAI sub-block is in asynchronous mode. + This property sets SAI sub-block as slave of another SAI sub-block. + Must contain the phandle and index of the sai sub-block providing + the synchronization. SAI subnodes: Two subnodes corresponding to SAI sub-block instances A et B can be defined. @@ -52,8 +60,8 @@ sai1: sai1@40015800 { #size-cells = <1>; ranges = <0 0x40015800 0x400>; reg = <0x40015800 0x4>; - clocks = <&rcc PLL1_Q>, <&rcc PLL2_P>; - clock-names = "x8k", "x11k"; + clocks = <&rcc SAI1_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>; + clock-names = "pclk", "x8k", "x11k"; interrupts = <87>; sai1a: audio-controller@40015804 { -- cgit v1.2.3 From 05c006145054a86430ed4fdd4f8c1b4139a44bee Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 17 Oct 2017 06:57:19 +0000 Subject: ASoC: audio-graph-scu-card: add missing Capture routing on Example Both cases have 1 Capture path. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt index 8b8afe9fcb31..a10daf54aa0c 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt @@ -43,7 +43,8 @@ Example 1. Sampling Rate Conversion label = "sound-card"; prefix = "codec"; routing = "codec Playback", "DAI0 Playback", - "codec Playback", "DAI1 Playback"; + "codec Playback", "DAI1 Playback", + "DAI0 Capture", "codec Capture"; convert-rate = <48000>; dais = <&cpu_port>; @@ -79,7 +80,8 @@ Example 2. 2 CPU 1 Codec (Mixing) label = "sound-card"; prefix = "codec"; routing = "codec Playback", "DAI0 Playback", - "codec Playback", "DAI1 Playback"; + "codec Playback", "DAI1 Playback", + "DAI0 Capture", "codec Capture"; convert-rate = <48000>; dais = <&cpu_port0 -- cgit v1.2.3 From 86d5b2c20d8ec255ef7646533b81dabc935e0eff Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 17 Oct 2017 06:57:49 +0000 Subject: ASoC: audio-graph-scu-card: remove unnecessary route patch from Example 1 Example 1 is for "Sampling Rate Conversion", sample has only 1 CPU, 1 Codec. Thus, "codec Playback", "DAI1 Playback" route is unnecessary. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt | 1 - 1 file changed, 1 deletion(-) (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt index a10daf54aa0c..441dd6f29df1 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt @@ -43,7 +43,6 @@ Example 1. Sampling Rate Conversion label = "sound-card"; prefix = "codec"; routing = "codec Playback", "DAI0 Playback", - "codec Playback", "DAI1 Playback", "DAI0 Capture", "codec Capture"; convert-rate = <48000>; -- cgit v1.2.3 From 3fa30ae9ff4a29e677b4800036f755517a27dd9e Mon Sep 17 00:00:00 2001 From: Marco Franchi Date: Wed, 25 Oct 2017 15:24:50 -0200 Subject: ASoC: sgtl5000: Remove leading zero from '@0a' notation Improve the binding example by removing the leading 0 from '@0a' notation, which fixes the following build warning: Warning (unit_address_format): Node /sgtl5000@0a unit name should not have leading 0s Signed-off-by: Marco Franchi Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/sgtl5000.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 7a73a9d62015..060cb4a3b47e 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -37,7 +37,7 @@ VDDIO 1.8V 2.5V 3.3V Example: -codec: sgtl5000@0a { +codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks 150>; -- cgit v1.2.3 From 8adc430603d67e76a0f8491df21654f691acda62 Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Wed, 8 Nov 2017 15:24:59 -0600 Subject: ASoC: cs42l56: Fix reset GPIO name in example DT binding The binding states the reset GPIO property shall be named "cirrus,gpio-nreset" and this is what the driver looks for, but the example uses "gpio-reset". Fix this here. Fixes: 3bb40619aca8 ("ASoC: cs42l56: bindings: sound: Add bindings for CS42L56 CODEC") Signed-off-by: Andrew F. Davis Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/cs42l56.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/cs42l56.txt b/Documentation/devicetree/bindings/sound/cs42l56.txt index 4feb0eb27ea4..4ba520a28ae8 100644 --- a/Documentation/devicetree/bindings/sound/cs42l56.txt +++ b/Documentation/devicetree/bindings/sound/cs42l56.txt @@ -55,7 +55,7 @@ Example: codec: codec@4b { compatible = "cirrus,cs42l56"; reg = <0x4b>; - gpio-reset = <&gpio 10 0>; + cirrus,gpio-nreset = <&gpio 10 0>; cirrus,chgfreq-divisor = <0x05>; cirrus.ain1_ref_cfg; cirrus,micbias-lvl = <5>; -- cgit v1.2.3 From b8b0d10c3a9b6ee94d56d0c3b162d05c177fb101 Mon Sep 17 00:00:00 2001 From: Olivier Moysan Date: Thu, 9 Nov 2017 15:07:57 +0100 Subject: ASoC: add mclk-fs to audio graph card binding Add mclk-fs support to audio graph card as initially supported in simple card. Signed-off-by: Olivier Moysan Acked-by: Kuninori Morimoto Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/audio-graph-card.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt index 6e6720aa33f1..d04ea3b1a1dd 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt @@ -17,6 +17,7 @@ Below are same as Simple-Card. - bitclock-master - bitclock-inversion - frame-inversion +- mclk-fs - dai-tdm-slot-num - dai-tdm-slot-width - clocks / system-clock-frequency -- cgit v1.2.3