From 9c2cbd478ee1830670e562a68d74b2336721b202 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Wed, 30 Aug 2017 10:29:14 +0200 Subject: Documentation/bindings: phy: document the Marvell comphy driver The Marvell Armada 7K/8K SoCs contains an hardware block called COMPHY that provides a number of shared PHYs used by various interfaces in the SoC: network, SATA, PCIe, etc. This Device Tree binding allows to describe this COMPHY hardware block. Signed-off-by: Antoine Tenart Signed-off-by: David S. Miller --- .../devicetree/bindings/phy/phy-mvebu-comphy.txt | 43 ++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt (limited to 'Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt') diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt new file mode 100644 index 000000000000..bfcf80341657 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt @@ -0,0 +1,43 @@ +mvebu comphy driver +------------------- + +A comphy controller can be found on Marvell Armada 7k/8k on the CP110. It +provides a number of shared PHYs used by various interfaces (network, sata, +usb, PCIe...). + +Required properties: + +- compatible: should be "marvell,comphy-cp110" +- reg: should contain the comphy register location and length. +- marvell,system-controller: should contain a phandle to the + system controller node. +- #address-cells: should be 1. +- #size-cells: should be 0. + +A sub-node is required for each comphy lane provided by the comphy. + +Required properties (child nodes): + +- reg: comphy lane number. +- #phy-cells : from the generic phy bindings, must be 1. Defines the + input port to use for a given comphy lane. + +Example: + + cpm_comphy: phy@120000 { + compatible = "marvell,comphy-cp110"; + reg = <0x120000 0x6000>; + marvell,system-controller = <&cpm_syscon0>; + #address-cells = <1>; + #size-cells = <0>; + + cpm_comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + cpm_comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + }; -- cgit v1.2.3