From 0b3813014c865a74b6322a4512de6610abf999b6 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 20 Aug 2021 17:03:52 +0200 Subject: dt-bindings: memory: convert Samsung Exynos DMC to dtschema Convert Samsung Exynos5422 SoC frequency and voltage scaling for Dynamic Memory Controller to DT schema format using json-schema. Signed-off-by: Krzysztof Kozlowski Acked-by: Lukasz Luba Link: https://lore.kernel.org/r/20210820150353.161161-3-krzysztof.kozlowski@canonical.com Signed-off-by: Rob Herring --- .../bindings/memory-controllers/exynos5422-dmc.txt | 84 ------------- .../memory-controllers/samsung,exynos5422-dmc.yaml | 137 +++++++++++++++++++++ 2 files changed, 137 insertions(+), 84 deletions(-) delete mode 100644 Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt create mode 100644 Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml (limited to 'Documentation/devicetree/bindings/memory-controllers') diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt b/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt deleted file mode 100644 index 02e4a1f862f1..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt +++ /dev/null @@ -1,84 +0,0 @@ -* Exynos5422 frequency and voltage scaling for Dynamic Memory Controller device - -The Samsung Exynos5422 SoC has DMC (Dynamic Memory Controller) to which the DRAM -memory chips are connected. The driver is to monitor the controller in runtime -and switch frequency and voltage. To monitor the usage of the controller in -runtime, the driver uses the PPMU (Platform Performance Monitoring Unit), which -is able to measure the current load of the memory. -When 'userspace' governor is used for the driver, an application is able to -switch the DMC and memory frequency. - -Required properties for DMC device for Exynos5422: -- compatible: Should be "samsung,exynos5422-dmc". -- clocks : list of clock specifiers, must contain an entry for each - required entry in clock-names for CLK_FOUT_SPLL, CLK_MOUT_SCLK_SPLL, - CLK_FF_DOUT_SPLL2, CLK_FOUT_BPLL, CLK_MOUT_BPLL, CLK_SCLK_BPLL, - CLK_MOUT_MX_MSPLL_CCORE, CLK_MOUT_MX_MSPLL_CCORE_PHY, CLK_MOUT_MCLK_CDREX, -- clock-names : should include "fout_spll", "mout_sclk_spll", "ff_dout_spll2", - "fout_bpll", "mout_bpll", "sclk_bpll", "mout_mx_mspll_ccore", - "mout_mclk_cdrex" entries -- devfreq-events : phandles for PPMU devices connected to this DMC. -- vdd-supply : phandle for voltage regulator which is connected. -- reg : registers of two CDREX controllers. -- operating-points-v2 : phandle for OPPs described in v2 definition. -- device-handle : phandle of the connected DRAM memory device. For more - information please refer to documentation file: - Documentation/devicetree/bindings/ddr/lpddr3.txt -- devfreq-events : phandles of the PPMU events used by the controller. -- samsung,syscon-clk : phandle of the clock register set used by the controller, - these registers are used for enabling a 'pause' feature and are not - exposed by clock framework but they must be used in a safe way. - The register offsets are in the driver code and specyfic for this SoC - type. - -Optional properties for DMC device for Exynos5422: -- interrupt-parent : The parent interrupt controller. -- interrupts : Contains the IRQ line numbers for the DMC internal performance - event counters in DREX0 and DREX1 channels. Align with specification of the - interrupt line(s) in the interrupt-parent controller. -- interrupt-names : IRQ names "drex_0" and "drex_1", the order should be the - same as in the 'interrupts' list above. - -Example: - - ppmu_dmc0_0: ppmu@10d00000 { - compatible = "samsung,exynos-ppmu"; - reg = <0x10d00000 0x2000>; - clocks = <&clock CLK_PCLK_PPMU_DREX0_0>; - clock-names = "ppmu"; - events { - ppmu_event_dmc0_0: ppmu-event3-dmc0_0 { - event-name = "ppmu-event3-dmc0_0"; - }; - }; - }; - - dmc: memory-controller@10c20000 { - compatible = "samsung,exynos5422-dmc"; - reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>; - clocks = <&clock CLK_FOUT_SPLL>, - <&clock CLK_MOUT_SCLK_SPLL>, - <&clock CLK_FF_DOUT_SPLL2>, - <&clock CLK_FOUT_BPLL>, - <&clock CLK_MOUT_BPLL>, - <&clock CLK_SCLK_BPLL>, - <&clock CLK_MOUT_MX_MSPLL_CCORE>, - <&clock CLK_MOUT_MCLK_CDREX>; - clock-names = "fout_spll", - "mout_sclk_spll", - "ff_dout_spll2", - "fout_bpll", - "mout_bpll", - "sclk_bpll", - "mout_mx_mspll_ccore", - "mout_mclk_cdrex"; - operating-points-v2 = <&dmc_opp_table>; - devfreq-events = <&ppmu_event3_dmc0_0>, <&ppmu_event3_dmc0_1>, - <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>; - device-handle = <&samsung_K3QF2F20DB>; - vdd-supply = <&buck1_reg>; - samsung,syscon-clk = <&clock>; - interrupt-parent = <&combiner>; - interrupts = <16 0>, <16 1>; - interrupt-names = "drex_0", "drex_1"; - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml new file mode 100644 index 000000000000..6f4fd5814bf4 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/samsung,exynos5422-dmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: | + Samsung Exynos5422 SoC frequency and voltage scaling for Dynamic Memory + Controller device + +maintainers: + - Krzysztof Kozlowski + - Lukasz Luba + +description: | + The Samsung Exynos5422 SoC has DMC (Dynamic Memory Controller) to which the + DRAM memory chips are connected. The driver is to monitor the controller in + runtime and switch frequency and voltage. To monitor the usage of the + controller in runtime, the driver uses the PPMU (Platform Performance + Monitoring Unit), which is able to measure the current load of the memory. + When 'userspace' governor is used for the driver, an application is able to + switch the DMC and memory frequency. + +properties: + compatible: + items: + - const: samsung,exynos5422-dmc + + clock-names: + items: + - const: fout_spll + - const: mout_sclk_spll + - const: ff_dout_spll2 + - const: fout_bpll + - const: mout_bpll + - const: sclk_bpll + - const: mout_mx_mspll_ccore + - const: mout_mclk_cdrex + + clocks: + minItems: 8 + maxItems: 8 + + devfreq-events: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 16 + description: phandles of the PPMU events used by the controller. + + device-handle: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + phandle of the connected DRAM memory device. For more information please + refer to documentation file: Documentation/devicetree/bindings/ddr/lpddr3.txt + + operating-points-v2: true + + interrupts: + items: + - description: DMC internal performance event counters in DREX0 + - description: DMC internal performance event counters in DREX1 + + interrupt-names: + items: + - const: drex_0 + - const: drex_1 + + reg: + items: + - description: registers of DREX0 + - description: registers of DREX1 + + samsung,syscon-clk: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Phandle of the clock register set used by the controller, these registers + are used for enabling a 'pause' feature and are not exposed by clock + framework but they must be used in a safe way. The register offsets are + in the driver code and specyfic for this SoC type. + + vdd-supply: true + +required: + - compatible + - clock-names + - clocks + - devfreq-events + - device-handle + - reg + - samsung,syscon-clk + +additionalProperties: false + +examples: + - | + #include + ppmu_dmc0_0: ppmu@10d00000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d00000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX0_0>; + clock-names = "ppmu"; + events { + ppmu_event_dmc0_0: ppmu-event3-dmc0-0 { + event-name = "ppmu-event3-dmc0_0"; + }; + }; + }; + + memory-controller@10c20000 { + compatible = "samsung,exynos5422-dmc"; + reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>; + clocks = <&clock CLK_FOUT_SPLL>, + <&clock CLK_MOUT_SCLK_SPLL>, + <&clock CLK_FF_DOUT_SPLL2>, + <&clock CLK_FOUT_BPLL>, + <&clock CLK_MOUT_BPLL>, + <&clock CLK_SCLK_BPLL>, + <&clock CLK_MOUT_MX_MSPLL_CCORE>, + <&clock CLK_MOUT_MCLK_CDREX>; + clock-names = "fout_spll", + "mout_sclk_spll", + "ff_dout_spll2", + "fout_bpll", + "mout_bpll", + "sclk_bpll", + "mout_mx_mspll_ccore", + "mout_mclk_cdrex"; + operating-points-v2 = <&dmc_opp_table>; + devfreq-events = <&ppmu_event3_dmc0_0>, <&ppmu_event3_dmc0_1>, + <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>; + device-handle = <&samsung_K3QF2F20DB>; + vdd-supply = <&buck1_reg>; + samsung,syscon-clk = <&clock>; + interrupt-parent = <&combiner>; + interrupts = <16 0>, <16 1>; + interrupt-names = "drex_0", "drex_1"; + }; -- cgit v1.2.3