From d507911c3a451986b3501417c78b568f3850b8ef Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Wed, 2 Jul 2008 20:55:58 +0200 Subject: WAN: don't mention syncppp in z8530 DocBook. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- Documentation/DocBook/z8530book.tmpl | 38 ++++++++++++------------------------ 1 file changed, 12 insertions(+), 26 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/z8530book.tmpl b/Documentation/DocBook/z8530book.tmpl index 42c75ba71ba2..a42a8a4c7689 100644 --- a/Documentation/DocBook/z8530book.tmpl +++ b/Documentation/DocBook/z8530book.tmpl @@ -69,12 +69,6 @@ device to be used as both a tty interface and as a synchronous controller is a project for Linux post the 2.4 release - - The support code handles most common card configurations and - supports running both Cisco HDLC and Synchronous PPP. With extra - glue the frame relay and X.25 protocols can also be used with this - driver. - @@ -179,35 +173,27 @@ If you wish to use the network interface facilities of the driver, then you need to attach a network device to each channel that is - present and in use. In addition to use the SyncPPP and Cisco HDLC + present and in use. In addition to use the generic HDLC you need to follow some additional plumbing rules. They may seem complex but a look at the example hostess_sv11 driver should reassure you. The network device used for each channel should be pointed to by - the netdevice field of each channel. The dev-> priv field of the + the netdevice field of each channel. The hdlc-> priv field of the network device points to your private data - you will need to be - able to find your ppp device from this. In addition to use the - sync ppp layer the private data must start with a void * pointer - to the syncppp structures. + able to find your private data from this. The way most drivers approach this particular problem is to create a structure holding the Z8530 device definition and - put that and the syncppp pointer into the private field of - the network device. The network device fields of the channels - then point back to the network devices. The ppp_device can also - be put in the private structure conveniently. + put that into the private field of the network device. The + network device fields of the channels then point back to the + network devices. - If you wish to use the synchronous ppp then you need to attach - the syncppp layer to the network device. You should do this before - you register the network device. The - sppp_attach requires that the first void * - pointer in your private data is pointing to an empty struct - ppp_device. The function fills in the initial data for the - ppp/hdlc layer. + If you wish to use the generic HDLC then you need to register + the HDLC device. Before you register your network device you will also need to @@ -314,10 +300,10 @@ buffer in sk_buff format and queues it for transmission. The caller must provide the entire packet with the exception of the bitstuffing and CRC. This is normally done by the caller via - the syncppp interface layer. It returns 0 if the buffer has been - queued and non zero values for queue full. If the function accepts - the buffer it becomes property of the Z8530 layer and the caller - should not free it. + the generic HDLC interface layer. It returns 0 if the buffer has been + queued and non zero values for queue full. If the function accepts + the buffer it becomes property of the Z8530 layer and the caller + should not free it. The function z8530_get_stats returns a pointer -- cgit v1.2.3 From b5ed042249cb5f76a428aa40ca219d591dad9eea Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 12:53:55 +0900 Subject: sh: Add documentation and integrate into docbook build. This adds some preliminary docbook bits for SH, tying in to the few interfaces that are exposed and that have adequate kerneldoc comments. Signed-off-by: Paul Mundt --- Documentation/DocBook/Makefile | 2 +- Documentation/DocBook/sh.tmpl | 105 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 106 insertions(+), 1 deletion(-) create mode 100644 Documentation/DocBook/sh.tmpl (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 0eb0d027eb32..1d1b34500b69 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -12,7 +12,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ - mac80211.xml debugobjects.xml + mac80211.xml debugobjects.xml sh.xml ### # The build process is as follows (targets): diff --git a/Documentation/DocBook/sh.tmpl b/Documentation/DocBook/sh.tmpl new file mode 100644 index 000000000000..0c3dc4c69dd1 --- /dev/null +++ b/Documentation/DocBook/sh.tmpl @@ -0,0 +1,105 @@ + + + + + + SuperH Interfaces Guide + + + + Paul + Mundt + +
+ lethal@linux-sh.org +
+ + + + + + 2008 + Paul Mundt + + + 2008 + Renesas Technology Corp. + + + + + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License version 2 as published by the Free Software Foundation. + + + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + + + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + + + + For more details see the file COPYING in the source + distribution of Linux. + + + + + + + + Memory Management + + SH-4 + + Store Queue API +!Earch/sh/kernel/cpu/sh4/sq.c + + + + SH-5 + + TLB Interfaces +!Iarch/sh/mm/tlb-sh5.c +!Iarch/sh/include/asm/tlb_64.h + + + + + Clock Framework Extensions +!Iarch/sh/include/asm/clock.h + + + Machine Specific Interfaces + + mach-dreamcast +!Iarch/sh/boards/mach-dreamcast/rtc.c + + + mach-x3proto +!Earch/sh/boards/mach-x3proto/ilsel.c + + + + Busses + + SuperHyway +!Edrivers/sh/superhyway/superhyway.c + + + + Maple +!Edrivers/sh/maple/maple.c + + + -- cgit v1.2.3 From 37193fb4639fa94f91cbbab1e8aca596300e1d94 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 5 Aug 2008 14:59:29 -0700 Subject: docbook: fix s390 fatal error after header files moved Fix (fatal error) s390 docbook file to handle renamed header files. Signed-off-by: Randy Dunlap cc: Martin Schwidefsky Signed-off-by: Linus Torvalds --- Documentation/DocBook/s390-drivers.tmpl | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/s390-drivers.tmpl b/Documentation/DocBook/s390-drivers.tmpl index 4acc73240a6d..95bfc12e5439 100644 --- a/Documentation/DocBook/s390-drivers.tmpl +++ b/Documentation/DocBook/s390-drivers.tmpl @@ -100,7 +100,7 @@ the hardware structures represented here, please consult the Principles of Operation. -!Iinclude/asm-s390/cio.h +!Iarch/s390/include/asm/cio.h ccw devices @@ -114,7 +114,7 @@ ccw device structure. Device drivers must not bypass those functions or strange side effects may happen. -!Iinclude/asm-s390/ccwdev.h +!Iarch/s390/include/asm/ccwdev.h !Edrivers/s390/cio/device.c !Edrivers/s390/cio/device_ops.c @@ -125,7 +125,7 @@ measurement data which is made available by the channel subsystem for each channel attached device. -!Iinclude/asm-s390/cmb.h +!Iarch/s390/include/asm/cmb.h !Edrivers/s390/cio/cmf.c @@ -142,7 +142,7 @@ ccw group devices -!Iinclude/asm-s390/ccwgroup.h +!Iarch/s390/include/asm/ccwgroup.h !Edrivers/s390/cio/ccwgroup.c -- cgit v1.2.3 From 3a35c27ac68cea19c252e127ec61099648eb4870 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 6 Aug 2008 10:08:56 -0700 Subject: docbook: fix v4l fatal filename error docproc: /var/linsrc/lin2627-rc2/drivers/media/video/videodev.c: No such file or directory make[1]: *** [Documentation/DocBook/videobook.xml] Error 1 Signed-off-by: Randy Dunlap cc: mchehab@infradead.org Signed-off-by: Linus Torvalds --- Documentation/DocBook/videobook.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/videobook.tmpl b/Documentation/DocBook/videobook.tmpl index 89817795e668..0bc25949b668 100644 --- a/Documentation/DocBook/videobook.tmpl +++ b/Documentation/DocBook/videobook.tmpl @@ -1648,7 +1648,7 @@ static struct video_buffer capture_fb; Public Functions Provided -!Edrivers/media/video/videodev.c +!Edrivers/media/video/v4l2-dev.c -- cgit v1.2.3 From 3794f3e812ef707a4f7931742274d1d0ca6597b4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 12 Aug 2008 15:09:06 -0700 Subject: docsrc: build Documentation/ sources Currently source files in the Documentation/ sub-dir can easily bit-rot since they are not generally buildable, either because they are hidden in text files or because there are no Makefile rules for them. This needs to be fixed so that the source files remain usable and good examples of code instead of bad examples. Add the ability to build source files that are in the Documentation/ dir. Add to Kconfig as "BUILD_DOCSRC" config symbol. Use "CONFIG_BUILD_DOCSRC=1 make ..." to build objects from the Documentation/ sources. Or enable BUILD_DOCSRC in the *config system. However, this symbol depends on HEADERS_CHECK since the header files need to be installed (for userspace builds). Built (using cross-tools) for x86-64, i386, alpha, ia64, sparc32, sparc64, powerpc, sh, m68k, & mips. Signed-off-by: Randy Dunlap Reviewed-by: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/DocBook/Makefile | 7 +++++++ Documentation/Makefile | 3 +++ Documentation/accounting/Makefile | 10 ++++++++++ Documentation/auxdisplay/Makefile | 10 ++++++++++ Documentation/connector/Makefile | 11 +++++++++++ Documentation/filesystems/configfs/Makefile | 3 +++ Documentation/ia64/Makefile | 8 ++++++++ Documentation/networking/Makefile | 8 ++++++++ Documentation/pcmcia/Makefile | 10 ++++++++++ Documentation/spi/Makefile | 11 +++++++++++ Documentation/video4linux/Makefile | 8 ++++++++ Documentation/vm/Makefile | 8 ++++++++ Documentation/watchdog/src/Makefile | 8 ++++++++ Makefile | 5 ++++- lib/Kconfig.debug | 9 +++++++++ 15 files changed, 118 insertions(+), 1 deletion(-) create mode 100644 Documentation/Makefile create mode 100644 Documentation/accounting/Makefile create mode 100644 Documentation/auxdisplay/Makefile create mode 100644 Documentation/connector/Makefile create mode 100644 Documentation/filesystems/configfs/Makefile create mode 100644 Documentation/ia64/Makefile create mode 100644 Documentation/networking/Makefile create mode 100644 Documentation/pcmcia/Makefile create mode 100644 Documentation/spi/Makefile create mode 100644 Documentation/video4linux/Makefile create mode 100644 Documentation/vm/Makefile create mode 100644 Documentation/watchdog/src/Makefile (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 1d1b34500b69..1615350b7b53 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -102,6 +102,13 @@ C-procfs-example = procfs_example.xml C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example)) $(obj)/procfs-guide.xml: $(C-procfs-example2) +# List of programs to build +##oops, this is a kernel module::hostprogs-y := procfs_example +obj-m += procfs_example.o + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + notfoundtemplate = echo "*** You have to install docbook-utils or xmlto ***"; \ exit 1 db2xtemplate = db2TYPE -o $(dir $@) $< diff --git a/Documentation/Makefile b/Documentation/Makefile new file mode 100644 index 000000000000..94b945733534 --- /dev/null +++ b/Documentation/Makefile @@ -0,0 +1,3 @@ +obj-m := DocBook/ accounting/ auxdisplay/ connector/ \ + filesystems/configfs/ ia64/ networking/ \ + pcmcia/ spi/ video4linux/ vm/ watchdog/src/ diff --git a/Documentation/accounting/Makefile b/Documentation/accounting/Makefile new file mode 100644 index 000000000000..31929eb875b1 --- /dev/null +++ b/Documentation/accounting/Makefile @@ -0,0 +1,10 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := getdelays + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_getdelays.o += -I$(objtree)/usr/include diff --git a/Documentation/auxdisplay/Makefile b/Documentation/auxdisplay/Makefile new file mode 100644 index 000000000000..51fe23332c81 --- /dev/null +++ b/Documentation/auxdisplay/Makefile @@ -0,0 +1,10 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := cfag12864b-example + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_cfag12864b-example.o += -I$(objtree)/usr/include diff --git a/Documentation/connector/Makefile b/Documentation/connector/Makefile new file mode 100644 index 000000000000..8df1a7285a06 --- /dev/null +++ b/Documentation/connector/Makefile @@ -0,0 +1,11 @@ +ifneq ($(CONFIG_CONNECTOR),) +obj-m += cn_test.o +endif + +# List of programs to build +hostprogs-y := ucon + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include diff --git a/Documentation/filesystems/configfs/Makefile b/Documentation/filesystems/configfs/Makefile new file mode 100644 index 000000000000..be7ec5e67dbc --- /dev/null +++ b/Documentation/filesystems/configfs/Makefile @@ -0,0 +1,3 @@ +ifneq ($(CONFIG_CONFIGFS_FS),) +obj-m += configfs_example_explicit.o configfs_example_macros.o +endif diff --git a/Documentation/ia64/Makefile b/Documentation/ia64/Makefile new file mode 100644 index 000000000000..b75db69ec483 --- /dev/null +++ b/Documentation/ia64/Makefile @@ -0,0 +1,8 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := aliasing-test + +# Tell kbuild to always build the programs +always := $(hostprogs-y) diff --git a/Documentation/networking/Makefile b/Documentation/networking/Makefile new file mode 100644 index 000000000000..6d8af1ac56c4 --- /dev/null +++ b/Documentation/networking/Makefile @@ -0,0 +1,8 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := ifenslave + +# Tell kbuild to always build the programs +always := $(hostprogs-y) diff --git a/Documentation/pcmcia/Makefile b/Documentation/pcmcia/Makefile new file mode 100644 index 000000000000..accde871ae77 --- /dev/null +++ b/Documentation/pcmcia/Makefile @@ -0,0 +1,10 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := crc32hash + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_crc32hash.o += -I$(objtree)/usr/include diff --git a/Documentation/spi/Makefile b/Documentation/spi/Makefile new file mode 100644 index 000000000000..a5b03c88beae --- /dev/null +++ b/Documentation/spi/Makefile @@ -0,0 +1,11 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := spidev_test spidev_fdx + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_spidev_test.o += -I$(objtree)/usr/include +HOSTCFLAGS_spidev_fdx.o += -I$(objtree)/usr/include diff --git a/Documentation/video4linux/Makefile b/Documentation/video4linux/Makefile new file mode 100644 index 000000000000..1ed0e98d057d --- /dev/null +++ b/Documentation/video4linux/Makefile @@ -0,0 +1,8 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := v4lgrab + +# Tell kbuild to always build the programs +always := $(hostprogs-y) diff --git a/Documentation/vm/Makefile b/Documentation/vm/Makefile new file mode 100644 index 000000000000..6f562f778b28 --- /dev/null +++ b/Documentation/vm/Makefile @@ -0,0 +1,8 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := slabinfo + +# Tell kbuild to always build the programs +always := $(hostprogs-y) diff --git a/Documentation/watchdog/src/Makefile b/Documentation/watchdog/src/Makefile new file mode 100644 index 000000000000..40e5f46e4740 --- /dev/null +++ b/Documentation/watchdog/src/Makefile @@ -0,0 +1,8 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := watchdog-simple watchdog-test + +# Tell kbuild to always build the programs +always := $(hostprogs-y) diff --git a/Makefile b/Makefile index f3e206509ee1..fd3ca6e8188a 100644 --- a/Makefile +++ b/Makefile @@ -821,6 +821,9 @@ ifdef CONFIG_HEADERS_CHECK endif ifdef CONFIG_SAMPLES $(Q)$(MAKE) $(build)=samples +endif +ifdef CONFIG_BUILD_DOCSRC + $(Q)$(MAKE) $(build)=Documentation endif $(call vmlinux-modpost) $(call if_changed_rule,vmlinux__) @@ -1166,7 +1169,7 @@ MRPROPER_FILES += .config .config.old include/asm .version .old_version \ # clean: rm-dirs := $(CLEAN_DIRS) clean: rm-files := $(CLEAN_FILES) -clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs)) +clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs) Documentation) PHONY += $(clean-dirs) clean archclean $(clean-dirs): diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index e1d4764435ed..800ac8485544 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -735,6 +735,15 @@ config FIREWIRE_OHCI_REMOTE_DMA If unsure, say N. +menuconfig BUILD_DOCSRC + bool "Build targets in Documentation/ tree" + depends on HEADERS_CHECK + help + This option attempts to build objects from the source files in the + kernel Documentation/ tree. + + Say N if you are unsure. + source "samples/Kconfig" source "lib/Kconfig.kgdb" -- cgit v1.2.3 From 5d39d9440dd6e590f78c295c5fdef195956da1c1 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 12 Aug 2008 15:09:06 -0700 Subject: docsrc: fix procfs example Add MODULE_LICENSE() to DocBook/procfs_example.c since modpost complained about a missing license there. Remove tty procfs removal since the creation was deleted long ago (http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commitdiff;h=5ad9cb65e9b15e5b83e2dd1c10a4bcaccc4ec644). Signed-off-by: Randy Dunlap Cc: Cc: Sam Ravnborg Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/DocBook/procfs_example.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/procfs_example.c b/Documentation/DocBook/procfs_example.c index 7064084c1c5e..2f3de0fb8365 100644 --- a/Documentation/DocBook/procfs_example.c +++ b/Documentation/DocBook/procfs_example.c @@ -189,8 +189,6 @@ static int __init init_procfs_example(void) return 0; no_symlink: - remove_proc_entry("tty", example_dir); -no_tty: remove_proc_entry("bar", example_dir); no_bar: remove_proc_entry("foo", example_dir); @@ -206,7 +204,6 @@ out: static void __exit cleanup_procfs_example(void) { remove_proc_entry("jiffies_too", example_dir); - remove_proc_entry("tty", example_dir); remove_proc_entry("bar", example_dir); remove_proc_entry("foo", example_dir); remove_proc_entry("jiffies", example_dir); @@ -222,3 +219,4 @@ module_exit(cleanup_procfs_example); MODULE_AUTHOR("Erik Mouw"); MODULE_DESCRIPTION("procfs examples"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3