From ebdc0f5817321cd5a45e76c6653adf7c7b1d0aee Mon Sep 17 00:00:00 2001 From: Ivan Mikhaylov Date: Wed, 28 Aug 2019 13:24:02 +0300 Subject: watchdog: apseed: Add access_cs0 option for alt-boot The option for the ast2400/2500 to get access to CS0 at runtime. Signed-off-by: Ivan Mikhaylov Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20190828102402.13155-5-i.mikhaylov@yadro.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- Documentation/ABI/testing/sysfs-class-watchdog | 34 ++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'Documentation/ABI') diff --git a/Documentation/ABI/testing/sysfs-class-watchdog b/Documentation/ABI/testing/sysfs-class-watchdog index 6317ade5ad19..675f9b537661 100644 --- a/Documentation/ABI/testing/sysfs-class-watchdog +++ b/Documentation/ABI/testing/sysfs-class-watchdog @@ -72,3 +72,37 @@ Description: It is a read/write file. When read, the currently assigned pretimeout governor is returned. When written, it sets the pretimeout governor. + +What: /sys/class/watchdog/watchdog1/access_cs0 +Date: August 2019 +Contact: Ivan Mikhaylov , + Alexander Amelkin +Description: + It is a read/write file. This attribute exists only if the + system has booted from the alternate flash chip due to + expiration of a watchdog timer of AST2400/AST2500 when + alternate boot function was enabled with 'aspeed,alt-boot' + devicetree option for that watchdog or with an appropriate + h/w strapping (for WDT2 only). + + At alternate flash the 'access_cs0' sysfs node provides: + ast2400: a way to get access to the primary SPI flash + chip at CS0 after booting from the alternate + chip at CS1. + ast2500: a way to restore the normal address mapping + from (CS0->CS1, CS1->CS0) to (CS0->CS0, + CS1->CS1). + + Clearing the boot code selection and timeout counter also + resets to the initial state the chip select line mapping. When + the SoC is in normal mapping state (i.e. booted from CS0), + clearing those bits does nothing for both versions of the SoC. + For alternate boot mode (booted from CS1 due to wdt2 + expiration) the behavior differs as described above. + + This option can be used with wdt2 (watchdog1) only. + + When read, the current status of the boot code selection is + shown. When written with any non-zero value, it clears + the boot code selection and the timeout counter, which results + in chipselect reset for AST2400/AST2500. -- cgit v1.2.3