From fed74d75277da865da9ba334d3f5d5e3e327971d Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Fri, 4 Nov 2022 11:56:05 +0100 Subject: pinctrl: mediatek: common-v2: Fix bias-disable for PULL_PU_PD_RSEL_TYPE In pinctrl-paris we're calling the .bias_set_combo() callback when we are asked to set the pin bias to either pull up/down or pull disable. On newer platforms, this callback is mtk_pinconf_bias_set_combo(), located in pinctrl-mtk-common-v2.c: this will check the "pull type" assigned to the requested pin and in case said pin's pull type is MTK_PULL_PU_PD_RSEL_TYPE, this function will set RSEL first, PUPD last, which is fine. The issue comes when we're requesting PIN_CONFIG_BIAS_DISABLE, as this does *not* require setting RSEL but only PU_PD: in this case, the arg is MTK_DISABLE (zero), which is not a supported RSEL, due to which function mtk_pinconf_bias_set_rsel() returns a failure; because of that, mtk_pinconf_bias_set_pu_pd() is never called, hence the pin bias is never set to DISABLE. To fix this issue, add a check to mtk_pinconf_bias_set_rsel(): if we are entering that function with no pullup requested and at the same time the arg is MTK_DISABLE, this means that we're trying to disable pin bias, hence it's safe to return cleanly without ever setting any RSEL register. This makes mtk_pinconf_bias_set_combo() happy, going on with setting the PU_PD registers, which is the only action to actually take to disable bias on a pin/pingroup. Fixes: fb34a9ae383a ("pinctrl: mediatek: support rsel feature") Signed-off-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20221104105605.33720-1-angelogioacchino.delregno@collabora.com Signed-off-by: Linus Walleij --- drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c index e1ae3beb9f72..b7921b59eb7b 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c @@ -709,6 +709,9 @@ static int mtk_pinconf_bias_set_rsel(struct mtk_pinctrl *hw, { int err, rsel_val; + if (!pullup && arg == MTK_DISABLE) + return 0; + if (hw->rsel_si_unit) { /* find pin rsel_index from pin_rsel array*/ err = mtk_hw_pin_rsel_lookup(hw, desc, pullup, arg, &rsel_val); -- cgit v1.2.3