From 4a28395d72a956f2dad24e343d06bc08c9afb89a Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 21 Dec 2009 16:19:58 -0800 Subject: arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c: avoid cross-CPU interrupts by using smp_call_function_any() Presently acpi-cpufreq will perform the MSR read on the first CPU in the mask. That's inefficient if that CPU differs from the current CPU. Because we have to perform a cross-CPU call, but we could have run the rdmsr on the current CPU. So switch to using the new smp_call_function_any(), which will perform the call on the current CPU if that CPU is present in the mask (it is). Cc: "Zhang, Yanmin" Cc: Dave Jones Cc: Ingo Molnar Cc: Jaswinder Singh Rajput Cc: Len Brown Cc: Mike Galbraith Cc: Rusty Russell Cc: Thomas Gleixner Cc: Venkatesh Pallipadi Cc: Zhao Yakui Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index f28decf8dde3..1b1920fa7c80 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -190,9 +190,11 @@ static void do_drv_write(void *_cmd) static void drv_read(struct drv_cmd *cmd) { + int err; cmd->val = 0; - smp_call_function_single(cpumask_any(cmd->mask), do_drv_read, cmd, 1); + err = smp_call_function_any(cmd->mask, do_drv_read, cmd, 1); + WARN_ON_ONCE(err); /* smp_call_function_any() was buggy? */ } static void drv_write(struct drv_cmd *cmd) -- cgit v1.2.3 From 3b1c37cab3765b87efbd4ed40301ceaf72b9f5c2 Mon Sep 17 00:00:00 2001 From: Jonathan Woithe Date: Wed, 23 Dec 2009 09:19:42 +1030 Subject: fujitu-laptop: fix tests of acpi_evaluate_integer() return value Fix tests on return value from acpi_evaluate_integer(). Based on a patch by Roel Kluin and incorporating suggestions from Len Brown . Signed-off-by: Roel Kluin Signed-off-by: Jonathan Woithe Signed-off-by: Len Brown --- drivers/platform/x86/fujitsu-laptop.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index bcd4ba8be7db..3c2d0384b43b 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -376,8 +376,8 @@ static int get_lcd_level(void) status = acpi_evaluate_integer(fujitsu->acpi_handle, "GBLL", NULL, &state); - if (status < 0) - return status; + if (ACPI_FAILURE(status)) + return 0; fujitsu->brightness_level = state & 0x0fffffff; @@ -398,8 +398,8 @@ static int get_max_brightness(void) status = acpi_evaluate_integer(fujitsu->acpi_handle, "RBLL", NULL, &state); - if (status < 0) - return status; + if (ACPI_FAILURE(status)) + return -1; fujitsu->max_brightness = state; -- cgit v1.2.3 From 0f1006b1f2b7862e35973c53cc4f99bea65d5a1d Mon Sep 17 00:00:00 2001 From: Anisse Astier Date: Thu, 17 Dec 2009 11:28:49 +0100 Subject: MAINTAINERS: add maintainer for msi-wmi driver Signed-off-by: Anisse Astier Signed-off-by: Len Brown --- MAINTAINERS | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index efd2ef2c2660..eefe43927898 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3644,6 +3644,11 @@ W: http://0pointer.de/lennart/tchibo.html S: Maintained F: drivers/platform/x86/msi-laptop.c +MSI WMI SUPPORT +M: Anisse Astier +S: Supported +F: drivers/platform/x86/msi-wmi.c + MULTIFUNCTION DEVICES (MFD) M: Samuel Ortiz T: git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git -- cgit v1.2.3 From 2370b5ed03030d554adb345778d5edecab7a510c Mon Sep 17 00:00:00 2001 From: "Carlos R. Mafra" Date: Tue, 22 Dec 2009 13:45:39 -0800 Subject: ACPI: do not select ACPI_DOCK from ATA_ACPI In March 2008 commit 0ac4a3c2fbbcadc3e96e4dc47d4ae802d66e6f67 ("ACPI: fix ATA_ACPI build") made CONFIG_ACPI_DOCK be selected by CONFIG_ATA_ACPI because of a build error when CONFIG_ATA_ACPI=y and CONFIG_ACPI_DOCK=m. However, in September 2008 commit 898b054f3eec5921320ae8614b5bdd7b07ea5b43 ("dock: make dock driver not a module") removed the possibility of having CONFIG_ACPI_DOCK=m and therefore there is no need for selecting it when CONFIG_ATA_ACPI=y. This makes the kernel ~5 Kb smaller for people who don't have a dock by allowing them to not have ACPI_DOCK compiled-in because of ATA_ACPI=y. Signed-off-by: Carlos R. Mafra Cc: Shaohua Li Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/ata/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 85844d053846..56c6374a3989 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -40,7 +40,6 @@ config ATA_VERBOSE_ERROR config ATA_ACPI bool "ATA ACPI Support" depends on ACPI && PCI - select ACPI_DOCK default y help This option adds support for ATA-related ACPI objects. -- cgit v1.2.3 From ff93be5dea548f16dcfe7b73ce5df7666efba92d Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 21 Dec 2009 16:20:01 -0800 Subject: asus_acpi: convert to seq_file Signed-off-by: Alexey Dobriyan Cc: Corentin Chary Cc: Karol Kozimor Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/platform/x86/asus_acpi.c | 321 +++++++++++++++++++++++---------------- 1 file changed, 194 insertions(+), 127 deletions(-) diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c index 0c9c53111a22..c1d2aeeea948 100644 --- a/drivers/platform/x86/asus_acpi.c +++ b/drivers/platform/x86/asus_acpi.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include #include @@ -513,26 +514,12 @@ static int read_acpi_int(acpi_handle handle, const char *method, int *val) return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER); } -/* - * We write our info in page, we begin at offset off and cannot write more - * than count bytes. We set eof to 1 if we handle those 2 values. We return the - * number of bytes written in page - */ -static int -proc_read_info(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int asus_info_proc_show(struct seq_file *m, void *v) { - int len = 0; int temp; - char buf[16]; /* enough for all info */ - /* - * We use the easy way, we don't care of off and count, - * so we don't set eof to 1 - */ - len += sprintf(page, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n"); - len += sprintf(page + len, "Model reference : %s\n", - hotk->methods->name); + seq_printf(m, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n"); + seq_printf(m, "Model reference : %s\n", hotk->methods->name); /* * The SFUN method probably allows the original driver to get the list * of features supported by a given model. For now, 0x0100 or 0x0800 @@ -540,8 +527,7 @@ proc_read_info(char *page, char **start, off_t off, int count, int *eof, * The significance of others is yet to be found. */ if (read_acpi_int(hotk->handle, "SFUN", &temp)) - len += - sprintf(page + len, "SFUN value : 0x%04x\n", temp); + seq_printf(m, "SFUN value : 0x%04x\n", temp); /* * Another value for userspace: the ASYM method returns 0x02 for * battery low and 0x04 for battery critical, its readings tend to be @@ -550,30 +536,34 @@ proc_read_info(char *page, char **start, off_t off, int count, int *eof, * silently ignored. */ if (read_acpi_int(hotk->handle, "ASYM", &temp)) - len += - sprintf(page + len, "ASYM value : 0x%04x\n", temp); + seq_printf(m, "ASYM value : 0x%04x\n", temp); if (asus_info) { - snprintf(buf, 16, "%d", asus_info->length); - len += sprintf(page + len, "DSDT length : %s\n", buf); - snprintf(buf, 16, "%d", asus_info->checksum); - len += sprintf(page + len, "DSDT checksum : %s\n", buf); - snprintf(buf, 16, "%d", asus_info->revision); - len += sprintf(page + len, "DSDT revision : %s\n", buf); - snprintf(buf, 7, "%s", asus_info->oem_id); - len += sprintf(page + len, "OEM id : %s\n", buf); - snprintf(buf, 9, "%s", asus_info->oem_table_id); - len += sprintf(page + len, "OEM table id : %s\n", buf); - snprintf(buf, 16, "%x", asus_info->oem_revision); - len += sprintf(page + len, "OEM revision : 0x%s\n", buf); - snprintf(buf, 5, "%s", asus_info->asl_compiler_id); - len += sprintf(page + len, "ASL comp vendor id : %s\n", buf); - snprintf(buf, 16, "%x", asus_info->asl_compiler_revision); - len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf); + seq_printf(m, "DSDT length : %d\n", asus_info->length); + seq_printf(m, "DSDT checksum : %d\n", asus_info->checksum); + seq_printf(m, "DSDT revision : %d\n", asus_info->revision); + seq_printf(m, "OEM id : %.*s\n", ACPI_OEM_ID_SIZE, asus_info->oem_id); + seq_printf(m, "OEM table id : %.*s\n", ACPI_OEM_TABLE_ID_SIZE, asus_info->oem_table_id); + seq_printf(m, "OEM revision : 0x%x\n", asus_info->oem_revision); + seq_printf(m, "ASL comp vendor id : %.*s\n", ACPI_NAME_SIZE, asus_info->asl_compiler_id); + seq_printf(m, "ASL comp revision : 0x%x\n", asus_info->asl_compiler_revision); } - return len; + return 0; +} + +static int asus_info_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, asus_info_proc_show, NULL); } +static const struct file_operations asus_info_proc_fops = { + .owner = THIS_MODULE, + .open = asus_info_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + /* * /proc handlers * We write our info in page, we begin at offset off and cannot write more @@ -639,34 +629,48 @@ write_led(const char __user *buffer, unsigned long count, /* * Proc handlers for MLED */ -static int -proc_read_mled(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int mled_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", - read_led(hotk->methods->mled_status, MLED_ON)); + seq_printf(m, "%d\n", read_led(hotk->methods->mled_status, MLED_ON)); + return 0; } -static int -proc_write_mled(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int mled_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, mled_proc_show, NULL); +} + +static ssize_t mled_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { return write_led(buffer, count, hotk->methods->mt_mled, MLED_ON, 1); } +static const struct file_operations mled_proc_fops = { + .owner = THIS_MODULE, + .open = mled_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = mled_proc_write, +}; + /* * Proc handlers for LED display */ -static int -proc_read_ledd(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int ledd_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "0x%08x\n", hotk->ledd_status); + seq_printf(m, "0x%08x\n", hotk->ledd_status); + return 0; } -static int -proc_write_ledd(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int ledd_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ledd_proc_show, NULL); +} + +static ssize_t ledd_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { int rv, value; @@ -682,61 +686,104 @@ proc_write_ledd(struct file *file, const char __user *buffer, return rv; } +static const struct file_operations ledd_proc_fops = { + .owner = THIS_MODULE, + .open = ledd_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = ledd_proc_write, +}; + /* * Proc handlers for WLED */ -static int -proc_read_wled(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int wled_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", - read_led(hotk->methods->wled_status, WLED_ON)); + seq_printf(m, "%d\n", read_led(hotk->methods->wled_status, WLED_ON)); + return 0; } -static int -proc_write_wled(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int wled_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, wled_proc_show, NULL); +} + +static ssize_t wled_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { return write_led(buffer, count, hotk->methods->mt_wled, WLED_ON, 0); } +static const struct file_operations wled_proc_fops = { + .owner = THIS_MODULE, + .open = wled_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = wled_proc_write, +}; + /* * Proc handlers for Bluetooth */ -static int -proc_read_bluetooth(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int bluetooth_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", read_led(hotk->methods->bt_status, BT_ON)); + seq_printf(m, "%d\n", read_led(hotk->methods->bt_status, BT_ON)); + return 0; } -static int -proc_write_bluetooth(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int bluetooth_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, bluetooth_proc_show, NULL); +} + +static ssize_t bluetooth_proc_write(struct file *file, + const char __user *buffer, size_t count, loff_t *pos) { /* Note: mt_bt_switch controls both internal Bluetooth adapter's presence and its LED */ return write_led(buffer, count, hotk->methods->mt_bt_switch, BT_ON, 0); } +static const struct file_operations bluetooth_proc_fops = { + .owner = THIS_MODULE, + .open = bluetooth_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = bluetooth_proc_write, +}; + /* * Proc handlers for TLED */ -static int -proc_read_tled(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int tled_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", - read_led(hotk->methods->tled_status, TLED_ON)); + seq_printf(m, "%d\n", read_led(hotk->methods->tled_status, TLED_ON)); + return 0; } -static int -proc_write_tled(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int tled_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, tled_proc_show, NULL); +} + +static ssize_t tled_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { return write_led(buffer, count, hotk->methods->mt_tled, TLED_ON, 0); } +static const struct file_operations tled_proc_fops = { + .owner = THIS_MODULE, + .open = tled_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = tled_proc_write, +}; + static int get_lcd_state(void) { int lcd = 0; @@ -829,16 +876,19 @@ static int set_lcd_state(int value) } -static int -proc_read_lcd(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int lcd_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", get_lcd_state()); + seq_printf(m, "%d\n", get_lcd_state()); + return 0; } -static int -proc_write_lcd(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int lcd_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, lcd_proc_show, NULL); +} + +static ssize_t lcd_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { int rv, value; @@ -848,6 +898,15 @@ proc_write_lcd(struct file *file, const char __user *buffer, return rv; } +static const struct file_operations lcd_proc_fops = { + .owner = THIS_MODULE, + .open = lcd_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = lcd_proc_write, +}; + static int read_brightness(struct backlight_device *bd) { int value; @@ -907,16 +966,19 @@ static int set_brightness_status(struct backlight_device *bd) return set_brightness(bd->props.brightness); } -static int -proc_read_brn(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int brn_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", read_brightness(NULL)); + seq_printf(m, "%d\n", read_brightness(NULL)); + return 0; } -static int -proc_write_brn(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int brn_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, brn_proc_show, NULL); +} + +static ssize_t brn_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { int rv, value; @@ -929,6 +991,15 @@ proc_write_brn(struct file *file, const char __user *buffer, return rv; } +static const struct file_operations brn_proc_fops = { + .owner = THIS_MODULE, + .open = brn_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = brn_proc_write, +}; + static void set_display(int value) { /* no sanity check needed for now */ @@ -942,9 +1013,7 @@ static void set_display(int value) * Now, *this* one could be more user-friendly, but so far, no-one has * complained. The significance of bits is the same as in proc_write_disp() */ -static int -proc_read_disp(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int disp_proc_show(struct seq_file *m, void *v) { int value = 0; @@ -952,7 +1021,13 @@ proc_read_disp(char *page, char **start, off_t off, int count, int *eof, printk(KERN_WARNING "Asus ACPI: Error reading display status\n"); value &= 0x07; /* needed for some models, shouldn't hurt others */ - return sprintf(page, "%d\n", value); + seq_printf(m, "%d\n", value); + return 0; +} + +static int disp_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, disp_proc_show, NULL); } /* @@ -961,9 +1036,8 @@ proc_read_disp(char *page, char **start, off_t off, int count, int *eof, * (bitwise) of these will suffice. I never actually tested 3 displays hooked * up simultaneously, so be warned. See the acpi4asus README for more info. */ -static int -proc_write_disp(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static ssize_t disp_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { int rv, value; @@ -973,25 +1047,27 @@ proc_write_disp(struct file *file, const char __user *buffer, return rv; } -typedef int (proc_readfunc) (char *page, char **start, off_t off, int count, - int *eof, void *data); -typedef int (proc_writefunc) (struct file *file, const char __user *buffer, - unsigned long count, void *data); +static const struct file_operations disp_proc_fops = { + .owner = THIS_MODULE, + .open = disp_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = disp_proc_write, +}; static int -asus_proc_add(char *name, proc_writefunc *writefunc, - proc_readfunc *readfunc, mode_t mode, +asus_proc_add(char *name, const struct file_operations *proc_fops, mode_t mode, struct acpi_device *device) { - struct proc_dir_entry *proc = - create_proc_entry(name, mode, acpi_device_dir(device)); + struct proc_dir_entry *proc; + + proc = proc_create_data(name, mode, acpi_device_dir(device), + proc_fops, acpi_driver_data(device)); if (!proc) { printk(KERN_WARNING " Unable to create %s fs entry\n", name); return -1; } - proc->write_proc = writefunc; - proc->read_proc = readfunc; - proc->data = acpi_driver_data(device); proc->uid = asus_uid; proc->gid = asus_gid; return 0; @@ -1020,10 +1096,9 @@ static int asus_hotk_add_fs(struct acpi_device *device) if (!acpi_device_dir(device)) return -ENODEV; - proc = create_proc_entry(PROC_INFO, mode, acpi_device_dir(device)); + proc = proc_create(PROC_INFO, mode, acpi_device_dir(device), + &asus_info_proc_fops); if (proc) { - proc->read_proc = proc_read_info; - proc->data = acpi_driver_data(device); proc->uid = asus_uid; proc->gid = asus_gid; } else { @@ -1032,28 +1107,23 @@ static int asus_hotk_add_fs(struct acpi_device *device) } if (hotk->methods->mt_wled) { - asus_proc_add(PROC_WLED, &proc_write_wled, &proc_read_wled, - mode, device); + asus_proc_add(PROC_WLED, &wled_proc_fops, mode, device); } if (hotk->methods->mt_ledd) { - asus_proc_add(PROC_LEDD, &proc_write_ledd, &proc_read_ledd, - mode, device); + asus_proc_add(PROC_LEDD, &ledd_proc_fops, mode, device); } if (hotk->methods->mt_mled) { - asus_proc_add(PROC_MLED, &proc_write_mled, &proc_read_mled, - mode, device); + asus_proc_add(PROC_MLED, &mled_proc_fops, mode, device); } if (hotk->methods->mt_tled) { - asus_proc_add(PROC_TLED, &proc_write_tled, &proc_read_tled, - mode, device); + asus_proc_add(PROC_TLED, &tled_proc_fops, mode, device); } if (hotk->methods->mt_bt_switch) { - asus_proc_add(PROC_BT, &proc_write_bluetooth, - &proc_read_bluetooth, mode, device); + asus_proc_add(PROC_BT, &bluetooth_proc_fops, mode, device); } /* @@ -1061,19 +1131,16 @@ static int asus_hotk_add_fs(struct acpi_device *device) * accessible from the keyboard */ if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) { - asus_proc_add(PROC_LCD, &proc_write_lcd, &proc_read_lcd, mode, - device); + asus_proc_add(PROC_LCD, &lcd_proc_fops, mode, device); } if ((hotk->methods->brightness_up && hotk->methods->brightness_down) || (hotk->methods->brightness_get && hotk->methods->brightness_set)) { - asus_proc_add(PROC_BRN, &proc_write_brn, &proc_read_brn, mode, - device); + asus_proc_add(PROC_BRN, &brn_proc_fops, mode, device); } if (hotk->methods->display_set) { - asus_proc_add(PROC_DISP, &proc_write_disp, &proc_read_disp, - mode, device); + asus_proc_add(PROC_DISP, &disp_proc_fops, mode, device); } return 0; -- cgit v1.2.3 From 936c8bcd7f5b418d0e040be539ceb4d2ac3bc0b8 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 21 Dec 2009 16:20:02 -0800 Subject: toshiba_acpi: convert to seq_file Signed-off-by: Alexey Dobriyan Cc: John W. Linville Cc: Johannes Berg Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/platform/x86/toshiba_acpi.c | 259 ++++++++++++++++++++---------------- 1 file changed, 147 insertions(+), 112 deletions(-) diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 51c0a8bee414..77bf5d8f893a 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include #include @@ -357,63 +358,6 @@ static int force_fan; static int last_key_event; static int key_event_valid; -typedef struct _ProcItem { - const char *name; - char *(*read_func) (char *); - unsigned long (*write_func) (const char *, unsigned long); -} ProcItem; - -/* proc file handlers - */ - -static int -dispatch_read(char *page, char **start, off_t off, int count, int *eof, - ProcItem * item) -{ - char *p = page; - int len; - - if (off == 0) - p = item->read_func(p); - - /* ISSUE: I don't understand this code */ - len = (p - page); - if (len <= off + count) - *eof = 1; - *start = page + off; - len -= off; - if (len > count) - len = count; - if (len < 0) - len = 0; - return len; -} - -static int -dispatch_write(struct file *file, const char __user * buffer, - unsigned long count, ProcItem * item) -{ - int result; - char *tmp_buffer; - - /* Arg buffer points to userspace memory, which can't be accessed - * directly. Since we're making a copy, zero-terminate the - * destination so that sscanf can be used on it safely. - */ - tmp_buffer = kmalloc(count + 1, GFP_KERNEL); - if (!tmp_buffer) - return -ENOMEM; - - if (copy_from_user(tmp_buffer, buffer, count)) { - result = -EFAULT; - } else { - tmp_buffer[count] = 0; - result = item->write_func(tmp_buffer, count); - } - kfree(tmp_buffer); - return result; -} - static int get_lcd(struct backlight_device *bd) { u32 hci_result; @@ -426,19 +370,24 @@ static int get_lcd(struct backlight_device *bd) return -EFAULT; } -static char *read_lcd(char *p) +static int lcd_proc_show(struct seq_file *m, void *v) { int value = get_lcd(NULL); if (value >= 0) { - p += sprintf(p, "brightness: %d\n", value); - p += sprintf(p, "brightness_levels: %d\n", + seq_printf(m, "brightness: %d\n", value); + seq_printf(m, "brightness_levels: %d\n", HCI_LCD_BRIGHTNESS_LEVELS); } else { printk(MY_ERR "Error reading LCD brightness\n"); } - return p; + return 0; +} + +static int lcd_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, lcd_proc_show, NULL); } static int set_lcd(int value) @@ -458,12 +407,20 @@ static int set_lcd_status(struct backlight_device *bd) return set_lcd(bd->props.brightness); } -static unsigned long write_lcd(const char *buffer, unsigned long count) +static ssize_t lcd_proc_write(struct file *file, const char __user *buf, + size_t count, loff_t *pos) { + char cmd[42]; + size_t len; int value; int ret; - if (sscanf(buffer, " brightness : %i", &value) == 1 && + len = min(count, sizeof(cmd) - 1); + if (copy_from_user(cmd, buf, len)) + return -EFAULT; + cmd[len] = '\0'; + + if (sscanf(cmd, " brightness : %i", &value) == 1 && value >= 0 && value < HCI_LCD_BRIGHTNESS_LEVELS) { ret = set_lcd(value); if (ret == 0) @@ -474,7 +431,16 @@ static unsigned long write_lcd(const char *buffer, unsigned long count) return ret; } -static char *read_video(char *p) +static const struct file_operations lcd_proc_fops = { + .owner = THIS_MODULE, + .open = lcd_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = lcd_proc_write, +}; + +static int video_proc_show(struct seq_file *m, void *v) { u32 hci_result; u32 value; @@ -484,18 +450,25 @@ static char *read_video(char *p) int is_lcd = (value & HCI_VIDEO_OUT_LCD) ? 1 : 0; int is_crt = (value & HCI_VIDEO_OUT_CRT) ? 1 : 0; int is_tv = (value & HCI_VIDEO_OUT_TV) ? 1 : 0; - p += sprintf(p, "lcd_out: %d\n", is_lcd); - p += sprintf(p, "crt_out: %d\n", is_crt); - p += sprintf(p, "tv_out: %d\n", is_tv); + seq_printf(m, "lcd_out: %d\n", is_lcd); + seq_printf(m, "crt_out: %d\n", is_crt); + seq_printf(m, "tv_out: %d\n", is_tv); } else { printk(MY_ERR "Error reading video out status\n"); } - return p; + return 0; } -static unsigned long write_video(const char *buffer, unsigned long count) +static int video_proc_open(struct inode *inode, struct file *file) { + return single_open(file, video_proc_show, NULL); +} + +static ssize_t video_proc_write(struct file *file, const char __user *buf, + size_t count, loff_t *pos) +{ + char *cmd, *buffer; int value; int remain = count; int lcd_out = -1; @@ -504,6 +477,17 @@ static unsigned long write_video(const char *buffer, unsigned long count) u32 hci_result; u32 video_out; + cmd = kmalloc(count + 1, GFP_KERNEL); + if (!cmd) + return -ENOMEM; + if (copy_from_user(cmd, buf, count)) { + kfree(cmd); + return -EFAULT; + } + cmd[count] = '\0'; + + buffer = cmd; + /* scan expression. Multiple expressions may be delimited with ; * * NOTE: to keep scanning simple, invalid fields are ignored @@ -523,6 +507,8 @@ static unsigned long write_video(const char *buffer, unsigned long count) while (remain && *(buffer - 1) != ';'); } + kfree(cmd); + hci_read1(HCI_VIDEO_OUT, &video_out, &hci_result); if (hci_result == HCI_SUCCESS) { unsigned int new_video_out = video_out; @@ -543,28 +529,50 @@ static unsigned long write_video(const char *buffer, unsigned long count) return count; } -static char *read_fan(char *p) +static const struct file_operations video_proc_fops = { + .owner = THIS_MODULE, + .open = video_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = video_proc_write, +}; + +static int fan_proc_show(struct seq_file *m, void *v) { u32 hci_result; u32 value; hci_read1(HCI_FAN, &value, &hci_result); if (hci_result == HCI_SUCCESS) { - p += sprintf(p, "running: %d\n", (value > 0)); - p += sprintf(p, "force_on: %d\n", force_fan); + seq_printf(m, "running: %d\n", (value > 0)); + seq_printf(m, "force_on: %d\n", force_fan); } else { printk(MY_ERR "Error reading fan status\n"); } - return p; + return 0; +} + +static int fan_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, fan_proc_show, NULL); } -static unsigned long write_fan(const char *buffer, unsigned long count) +static ssize_t fan_proc_write(struct file *file, const char __user *buf, + size_t count, loff_t *pos) { + char cmd[42]; + size_t len; int value; u32 hci_result; - if (sscanf(buffer, " force_on : %i", &value) == 1 && + len = min(count, sizeof(cmd) - 1); + if (copy_from_user(cmd, buf, len)) + return -EFAULT; + cmd[len] = '\0'; + + if (sscanf(cmd, " force_on : %i", &value) == 1 && value >= 0 && value <= 1) { hci_write1(HCI_FAN, value, &hci_result); if (hci_result != HCI_SUCCESS) @@ -578,7 +586,16 @@ static unsigned long write_fan(const char *buffer, unsigned long count) return count; } -static char *read_keys(char *p) +static const struct file_operations fan_proc_fops = { + .owner = THIS_MODULE, + .open = fan_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = fan_proc_write, +}; + +static int keys_proc_show(struct seq_file *m, void *v) { u32 hci_result; u32 value; @@ -602,18 +619,30 @@ static char *read_keys(char *p) } } - p += sprintf(p, "hotkey_ready: %d\n", key_event_valid); - p += sprintf(p, "hotkey: 0x%04x\n", last_key_event); + seq_printf(m, "hotkey_ready: %d\n", key_event_valid); + seq_printf(m, "hotkey: 0x%04x\n", last_key_event); +end: + return 0; +} - end: - return p; +static int keys_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, keys_proc_show, NULL); } -static unsigned long write_keys(const char *buffer, unsigned long count) +static ssize_t keys_proc_write(struct file *file, const char __user *buf, + size_t count, loff_t *pos) { + char cmd[42]; + size_t len; int value; - if (sscanf(buffer, " hotkey_ready : %i", &value) == 1 && value == 0) { + len = min(count, sizeof(cmd) - 1); + if (copy_from_user(cmd, buf, len)) + return -EFAULT; + cmd[len] = '\0'; + + if (sscanf(cmd, " hotkey_ready : %i", &value) == 1 && value == 0) { key_event_valid = 0; } else { return -EINVAL; @@ -622,52 +651,58 @@ static unsigned long write_keys(const char *buffer, unsigned long count) return count; } -static char *read_version(char *p) +static const struct file_operations keys_proc_fops = { + .owner = THIS_MODULE, + .open = keys_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = keys_proc_write, +}; + +static int version_proc_show(struct seq_file *m, void *v) { - p += sprintf(p, "driver: %s\n", TOSHIBA_ACPI_VERSION); - p += sprintf(p, "proc_interface: %d\n", - PROC_INTERFACE_VERSION); - return p; + seq_printf(m, "driver: %s\n", TOSHIBA_ACPI_VERSION); + seq_printf(m, "proc_interface: %d\n", PROC_INTERFACE_VERSION); + return 0; } +static int version_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, version_proc_show, PDE(inode)->data); +} + +static const struct file_operations version_proc_fops = { + .owner = THIS_MODULE, + .open = version_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + /* proc and module init */ #define PROC_TOSHIBA "toshiba" -static ProcItem proc_items[] = { - {"lcd", read_lcd, write_lcd}, - {"video", read_video, write_video}, - {"fan", read_fan, write_fan}, - {"keys", read_keys, write_keys}, - {"version", read_version, NULL}, - {NULL} -}; - static acpi_status __init add_device(void) { - struct proc_dir_entry *proc; - ProcItem *item; - - for (item = proc_items; item->name; ++item) { - proc = create_proc_read_entry(item->name, - S_IFREG | S_IRUGO | S_IWUSR, - toshiba_proc_dir, - (read_proc_t *) dispatch_read, - item); - if (proc && item->write_func) - proc->write_proc = (write_proc_t *) dispatch_write; - } + proc_create("lcd", S_IRUGO | S_IWUSR, toshiba_proc_dir, &lcd_proc_fops); + proc_create("video", S_IRUGO | S_IWUSR, toshiba_proc_dir, &video_proc_fops); + proc_create("fan", S_IRUGO | S_IWUSR, toshiba_proc_dir, &fan_proc_fops); + proc_create("keys", S_IRUGO | S_IWUSR, toshiba_proc_dir, &keys_proc_fops); + proc_create("version", S_IRUGO, toshiba_proc_dir, &version_proc_fops); return AE_OK; } static acpi_status remove_device(void) { - ProcItem *item; - - for (item = proc_items; item->name; ++item) - remove_proc_entry(item->name, toshiba_proc_dir); + remove_proc_entry("lcd", toshiba_proc_dir); + remove_proc_entry("video", toshiba_proc_dir); + remove_proc_entry("fan", toshiba_proc_dir); + remove_proc_entry("keys", toshiba_proc_dir); + remove_proc_entry("version", toshiba_proc_dir); return AE_OK; } -- cgit v1.2.3 From bdc731bc5fcd1794e9ac8ac80c389d302381c123 Mon Sep 17 00:00:00 2001 From: Stefan Bader Date: Mon, 21 Dec 2009 16:20:04 -0800 Subject: acerhdf: limit modalias matching to supported BugLink: https://bugs.launchpad.net/ubuntu/+bug/435958 The module alias currently matches any Acer computer but when loaded the BIOS checks will only succeed on Aspire One models. This causes a invalid BIOS warning for all other models (seen on Aspire 4810T). This is not fatal but worries users that see this message. Limiting the moule alias to models starting with AOA or DOA for Packard Bell. Signed-off-by: Stefan Bader Acked-by: Borislav Petkov Acked-by: Peter Feuerer Cc: Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/platform/x86/acerhdf.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 79b15b9d9cf0..007bc55b9869 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -640,9 +640,10 @@ static void __exit acerhdf_exit(void) MODULE_LICENSE("GPL"); MODULE_AUTHOR("Peter Feuerer"); MODULE_DESCRIPTION("Aspire One temperature and fan driver"); -MODULE_ALIAS("dmi:*:*Acer*:*:"); -MODULE_ALIAS("dmi:*:*Gateway*:*:"); -MODULE_ALIAS("dmi:*:*Packard Bell*:*:"); +MODULE_ALIAS("dmi:*:*Acer*:pnAOA*:"); +MODULE_ALIAS("dmi:*:*Gateway*:pnAOA*:"); +MODULE_ALIAS("dmi:*:*Packard Bell*:pnAOA*:"); +MODULE_ALIAS("dmi:*:*Packard Bell*:pnDOA*:"); module_init(acerhdf_init); module_exit(acerhdf_exit); -- cgit v1.2.3 From 94219d798e65dff1dac5f8f36f03a9bdb3105f91 Mon Sep 17 00:00:00 2001 From: Peter Feuerer Date: Mon, 21 Dec 2009 16:20:05 -0800 Subject: acerhdf: add new BIOS versions Add new BIOS versions for following netbooks: Aspire 1810xx, Packard Bell DOTMU. Signed-off-by: Peter Feuerer Cc: Borislav Petkov Cc: Andreas Mohr Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/platform/x86/acerhdf.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 007bc55b9869..a97fc4a7c600 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -52,7 +52,7 @@ */ #undef START_IN_KERNEL_MODE -#define DRV_VER "0.5.20" +#define DRV_VER "0.5.21" /* * According to the Atom N270 datasheet, @@ -156,7 +156,13 @@ static const struct bios_settings_t bios_tbl[] = { {"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x20, 0x00} }, /* Acer 1410 */ {"Acer", "Aspire 1410", "v0.3120", 0x55, 0x58, {0x9e, 0x9e, 0x00} }, - /* special BIOS / other */ + {"Acer", "Aspire 1410", "v1.3303", 0x55, 0x58, {0x9e, 0x9e, 0x00} }, + /* Acer 1810xx */ + {"Acer", "Aspire 1810TZ", "v0.3120", 0x55, 0x58, {0x9e, 0x9e, 0x00} }, + {"Acer", "Aspire 1810T", "v0.3120", 0x55, 0x58, {0x9e, 0x9e, 0x00} }, + {"Acer", "Aspire 1810T", "v1.3303", 0x55, 0x58, {0x9e, 0x9e, 0x00} }, + {"Acer", "Aspire 1810TZ", "v1.3303", 0x55, 0x58, {0x9e, 0x9e, 0x00} }, + /* Gateway */ {"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x21, 0x00} }, {"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x20, 0x00} }, {"Gateway ", "LT31 ", "v1.3103 ", 0x55, 0x58, @@ -165,10 +171,13 @@ static const struct bios_settings_t bios_tbl[] = { {0x10, 0x0f, 0x00} }, {"Gateway ", "LT31 ", "v1.3302 ", 0x55, 0x58, {0x10, 0x0f, 0x00} }, + /* Packard Bell */ {"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x21, 0x00} }, {"Packard Bell", "DOA150", "v0.3105", 0x55, 0x58, {0x20, 0x20, 0x00} }, {"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x21, 0x00} }, {"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x20, 0x00} }, + {"Packard Bell", "DOTMU", "v1.3303", 0x55, 0x58, {0x9e, 0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3120", 0x55, 0x58, {0x9e, 0x9e, 0x00} }, /* pewpew-terminator */ {"", "", "", 0, 0, {0, 0, 0} } }; @@ -641,9 +650,13 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Peter Feuerer"); MODULE_DESCRIPTION("Aspire One temperature and fan driver"); MODULE_ALIAS("dmi:*:*Acer*:pnAOA*:"); +MODULE_ALIAS("dmi:*:*Acer*:pnAspire 1410*:"); +MODULE_ALIAS("dmi:*:*Acer*:pnAspire 1810*:"); MODULE_ALIAS("dmi:*:*Gateway*:pnAOA*:"); +MODULE_ALIAS("dmi:*:*Gateway*:pnLT31*:"); MODULE_ALIAS("dmi:*:*Packard Bell*:pnAOA*:"); MODULE_ALIAS("dmi:*:*Packard Bell*:pnDOA*:"); +MODULE_ALIAS("dmi:*:*Packard Bell*:pnDOTMU*:"); module_init(acerhdf_init); module_exit(acerhdf_exit); -- cgit v1.2.3 From dcbfb8156a2149fd6358a377aa9400e28ef43800 Mon Sep 17 00:00:00 2001 From: Peter Feuerer Date: Mon, 21 Dec 2009 16:20:06 -0800 Subject: drivers/platform/x86/acerhdf.c: check BIOS information whether it begins with string of table BIOS information is now checked whether it begins with the strings stored in the BIOS table. Previous method did a strcmp, what lead to problems if BIOS information has appended whitespaces. Signed-off-by: Peter Feuerer Cc: Borislav Petkov Cc: Andreas Mohr Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/platform/x86/acerhdf.c | 46 +++++++++++++++++++++++++----------------- 1 file changed, 28 insertions(+), 18 deletions(-) diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index a97fc4a7c600..7b2384d674d0 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -52,7 +52,7 @@ */ #undef START_IN_KERNEL_MODE -#define DRV_VER "0.5.21" +#define DRV_VER "0.5.22" /* * According to the Atom N270 datasheet, @@ -165,12 +165,9 @@ static const struct bios_settings_t bios_tbl[] = { /* Gateway */ {"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x21, 0x00} }, {"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x20, 0x00} }, - {"Gateway ", "LT31 ", "v1.3103 ", 0x55, 0x58, - {0x10, 0x0f, 0x00} }, - {"Gateway ", "LT31 ", "v1.3201 ", 0x55, 0x58, - {0x10, 0x0f, 0x00} }, - {"Gateway ", "LT31 ", "v1.3302 ", 0x55, 0x58, - {0x10, 0x0f, 0x00} }, + {"Gateway", "LT31", "v1.3103", 0x55, 0x58, {0x10, 0x0f, 0x00} }, + {"Gateway", "LT31", "v1.3201", 0x55, 0x58, {0x10, 0x0f, 0x00} }, + {"Gateway", "LT31", "v1.3302", 0x55, 0x58, {0x10, 0x0f, 0x00} }, /* Packard Bell */ {"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x21, 0x00} }, {"Packard Bell", "DOA150", "v0.3105", 0x55, 0x58, {0x20, 0x20, 0x00} }, @@ -495,13 +492,26 @@ static struct platform_driver acerhdf_driver = { .remove = acerhdf_remove, }; +/* checks if str begins with start */ +static int str_starts_with(const char *str, const char *start) +{ + unsigned long str_len = 0, start_len = 0; + + str_len = strlen(str); + start_len = strlen(start); + + if (str_len >= start_len && + !strncmp(str, start, start_len)) + return 1; + + return 0; +} /* check hardware */ static int acerhdf_check_hardware(void) { char const *vendor, *version, *product; - int i; - unsigned long prod_len = 0; + const struct bios_settings_t *bt = NULL; /* get BIOS data */ vendor = dmi_get_system_info(DMI_SYS_VENDOR); @@ -523,20 +533,20 @@ static int acerhdf_check_hardware(void) kernelmode = 0; } - prod_len = strlen(product); - if (verbose) pr_info("BIOS info: %s %s, product: %s\n", vendor, version, product); /* search BIOS version and vendor in BIOS settings table */ - for (i = 0; bios_tbl[i].version[0]; i++) { - if (strlen(bios_tbl[i].product) >= prod_len && - !strncmp(bios_tbl[i].product, product, - strlen(bios_tbl[i].product)) && - !strcmp(bios_tbl[i].vendor, vendor) && - !strcmp(bios_tbl[i].version, version)) { - bios_cfg = &bios_tbl[i]; + for (bt = bios_tbl; bt->vendor[0]; bt++) { + /* + * check if actual hardware BIOS vendor, product and version + * IDs start with the strings of BIOS table entry + */ + if (str_starts_with(vendor, bt->vendor) && + str_starts_with(product, bt->product) && + str_starts_with(version, bt->version)) { + bios_cfg = bt; break; } } -- cgit v1.2.3 From 3e9b988e4edf065d39c1343937f717319b1c1065 Mon Sep 17 00:00:00 2001 From: Anisse Astier Date: Fri, 4 Dec 2009 10:10:09 +0100 Subject: wmi: Free the allocated acpi objects through wmi_get_event_data These function allocate an acpi object by calling wmi_get_event_data, which then calls acpi_evaluate_object, and it is not freed afterwards. And kernel doc is fixed for parameters of wmi_get_event_data. Signed-off-by: Anisse Astier Acked-by: Randy Dunlap Acked-by: Carlos Corbacho Signed-off-by: Len Brown --- drivers/platform/x86/dell-wmi.c | 1 + drivers/platform/x86/hp-wmi.c | 2 ++ drivers/platform/x86/wmi.c | 4 ++-- 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c index 67f3fe71c509..6561dfc028e5 100644 --- a/drivers/platform/x86/dell-wmi.c +++ b/drivers/platform/x86/dell-wmi.c @@ -238,6 +238,7 @@ static void dell_wmi_notify(u32 value, void *context) input_sync(dell_wmi_input_dev); } } + kfree(obj); } diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 63c3e658a884..db10c5d007ec 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -381,6 +381,8 @@ static void hp_wmi_notify(u32 value, void *context) } else printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n", eventcode); + + kfree(obj); } static int __init hp_wmi_input_setup(void) diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index e425a868cd3a..9f93d6c0f510 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -540,8 +540,8 @@ EXPORT_SYMBOL_GPL(wmi_remove_notify_handler); /** * wmi_get_event_data - Get WMI data associated with an event * - * @event - Event to find - * &out - Buffer to hold event data + * @event: Event to find + * @out: Buffer to hold event data. out->pointer should be freed with kfree() * * Returns extra data associated with an event in WMI. */ -- cgit v1.2.3 From 1fdd407f4e3f2ecb453954cbebb6c22491c61853 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 17 Dec 2009 22:19:42 -0800 Subject: dell-wmi: do not keep driver loaded on unsupported boxes There is no point in having the driver loaded in memory if we fail to locate particular WMI GUID. Signed-off-by: Dmitry Torokhov Acked-by: Matthew Garrett Signed-off-by: Len Brown --- drivers/platform/x86/dell-wmi.c | 41 +++++++++++++++++++---------------------- 1 file changed, 19 insertions(+), 22 deletions(-) diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c index 6561dfc028e5..916ccb2b316c 100644 --- a/drivers/platform/x86/dell-wmi.c +++ b/drivers/platform/x86/dell-wmi.c @@ -325,37 +325,34 @@ static int __init dell_wmi_init(void) int err; if (wmi_has_guid(DELL_EVENT_GUID)) { + printk(KERN_WARNING "dell-wmi: No known WMI GUID found\n"); + return -ENODEV; + } - dmi_walk(find_hk_type, NULL); - - err = dell_wmi_input_setup(); - - if (err) - return err; - - err = wmi_install_notify_handler(DELL_EVENT_GUID, - dell_wmi_notify, NULL); - if (err) { - input_unregister_device(dell_wmi_input_dev); - printk(KERN_ERR "dell-wmi: Unable to register" - " notify handler - %d\n", err); - return err; - } + dmi_walk(find_hk_type, NULL); + acpi_video = acpi_video_backlight_support(); - acpi_video = acpi_video_backlight_support(); + err = dell_wmi_input_setup(); + if (err) + return err; - } else - printk(KERN_WARNING "dell-wmi: No known WMI GUID found\n"); + err = wmi_install_notify_handler(DELL_EVENT_GUID, + dell_wmi_notify, NULL); + if (err) { + input_unregister_device(dell_wmi_input_dev); + printk(KERN_ERR + "dell-wmi: Unable to register notify handler - %d\n", + err); + return err; + } return 0; } static void __exit dell_wmi_exit(void) { - if (wmi_has_guid(DELL_EVENT_GUID)) { - wmi_remove_notify_handler(DELL_EVENT_GUID); - input_unregister_device(dell_wmi_input_dev); - } + wmi_remove_notify_handler(DELL_EVENT_GUID); + input_unregister_device(dell_wmi_input_dev); } module_init(dell_wmi_init); -- cgit v1.2.3 From 4d5f177caf1ef78f5e7eaee75b66b4d534445682 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 18 Dec 2009 15:29:22 +0100 Subject: acer-wmi, msi-wmi: Remove needless DMI MODULE_ALIAS Now that we have WMI autoloading the DMI matching is not needed anymore. Signed-off-by: Thomas Renninger Acked-by: Carlos Corbacho Acked-by: Anisse Astier Signed-off-by: Len Brown --- drivers/platform/x86/acer-wmi.c | 3 --- drivers/platform/x86/msi-wmi.c | 10 ---------- 2 files changed, 13 deletions(-) diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 454970d2d701..07d14dfdf0b4 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -96,9 +96,6 @@ struct acer_quirks { MODULE_ALIAS("wmi:67C3371D-95A3-4C37-BB61-DD47B491DAAB"); MODULE_ALIAS("wmi:6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3"); -/* Temporary workaround until the WMI sysfs interface goes in */ -MODULE_ALIAS("dmi:*:*Acer*:*:"); - /* * Interface capability flags */ diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c index 0c8fe145c4af..7f77f908bb01 100644 --- a/drivers/platform/x86/msi-wmi.c +++ b/drivers/platform/x86/msi-wmi.c @@ -34,16 +34,6 @@ MODULE_LICENSE("GPL"); MODULE_ALIAS("wmi:551A1F84-FBDD-4125-91DB-3EA8F44F1D45"); MODULE_ALIAS("wmi:B6F3EEF2-3D2F-49DC-9DE3-85BCE18C62F2"); -/* Temporary workaround until the WMI sysfs interface goes in - { "svn", DMI_SYS_VENDOR }, - { "pn", DMI_PRODUCT_NAME }, - { "pvr", DMI_PRODUCT_VERSION }, - { "rvn", DMI_BOARD_VENDOR }, - { "rn", DMI_BOARD_NAME }, -*/ - -MODULE_ALIAS("dmi:*:svnMICRO-STARINTERNATIONAL*:pnMS-6638:*"); - #define DRV_NAME "msi-wmi" #define DRV_PFX DRV_NAME ": " -- cgit v1.2.3 From 44ef00e6482e755f36629773abc2aee83a6f53e3 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 18 Dec 2009 15:29:23 +0100 Subject: hp-wmi: Fix two memleaks Signed-off-by: Thomas Renninger Signed-off-by: Len Brown --- drivers/platform/x86/hp-wmi.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index db10c5d007ec..8781d8fa7a57 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -134,10 +134,15 @@ static int hp_wmi_perform_query(int query, int write, int value) obj = output.pointer; - if (!obj || obj->type != ACPI_TYPE_BUFFER) + if (!obj) return -EINVAL; + else if (obj->type != ACPI_TYPE_BUFFER) { + kfree(obj); + return -EINVAL; + } bios_return = *((struct bios_return *)obj->buffer.pointer); + kfree(obj); if (bios_return.return_code > 0) return bios_return.return_code * -1; else @@ -340,10 +345,12 @@ static void hp_wmi_notify(u32 value, void *context) if (!obj || obj->type != ACPI_TYPE_BUFFER || obj->buffer.length != 8) { printk(KERN_INFO "HP WMI: Unknown response received\n"); + kfree(obj); return; } eventcode = *((u8 *) obj->buffer.pointer); + kfree(obj); if (eventcode == 0x4) eventcode = hp_wmi_perform_query(HPWMI_HOTKEY_QUERY, 0, 0); -- cgit v1.2.3