From fa6bd996db2fbecd7a9a408c158105c55a51fe41 Mon Sep 17 00:00:00 2001
From: Li Yang <leoli@freescale.com>
Date: Fri, 7 May 2010 16:38:34 +0800
Subject: powerpc/fsl-booke: Fix InstructionTLBError execute permission check

In CONFIG_PTE_64BIT the PTE format has unique permission bits for user
and supervisor execute.  However on !CONFIG_PTE_64BIT we overload the
supervisor bit to imply user execute with _PAGE_USER set.  This allows
us to use the same permission check mask for user or supervisor code on
!CONFIG_PTE_64BIT.

However, on CONFIG_PTE_64BIT we map _PAGE_EXEC to _PAGE_BAP_UX so we
need a different permission mask based on the fault coming from a kernel
address or user space.

Without unique permission masks we see issues like the following with
modules:

Unable to handle kernel paging request for instruction fetch
Faulting instruction address: 0xf938d040
Oops: Kernel access of bad area, sig: 11 [#1]

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jin Qing <b24347@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/kernel/head_fsl_booke.S | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 725526547994..edd4a57fd29e 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -639,6 +639,13 @@ interrupt_base:
 	rlwinm	r12,r12,0,16,1
 	mtspr	SPRN_MAS1,r12
 
+	/* Make up the required permissions for kernel code */
+#ifdef CONFIG_PTE_64BIT
+	li	r13,_PAGE_PRESENT | _PAGE_BAP_SX
+	oris	r13,r13,_PAGE_ACCESSED@h
+#else
+	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
+#endif
 	b	4f
 
 	/* Get the PGD for the current thread */
@@ -646,15 +653,15 @@ interrupt_base:
 	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 
-4:
-	/* Make up the required permissions */
+	/* Make up the required permissions for user code */
 #ifdef CONFIG_PTE_64BIT
-	li	r13,_PAGE_PRESENT | _PAGE_EXEC
+	li	r13,_PAGE_PRESENT | _PAGE_BAP_UX
 	oris	r13,r13,_PAGE_ACCESSED@h
 #else
 	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
 #endif
 
+4:
 	FIND_PTE
 	andc.	r13,r13,r11		/* Check permission */
 
-- 
cgit v1.2.3


From 500a0e56c36dabb8cb0d8f3c93aac900058ef7af Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Thu, 13 May 2010 14:38:21 -0500
Subject: powerpc/fsl-booke: Move loadcam_entry back to asm code to fix SMP
 ftrace

When we build with ftrace enabled its possible that loadcam_entry would
have used the stack pointer (even though the code doesn't need it).  We
call loadcam_entry in __secondary_start before the stack is setup.  To
ensure that loadcam_entry doesn't use the stack pointer the easiest
solution is to just have it in asm code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/kernel/asm-offsets.c |  8 ++++++++
 arch/powerpc/mm/fsl_booke_mmu.c   | 25 +++----------------------
 arch/powerpc/mm/mmu_decl.h        | 10 +++++++++-
 arch/powerpc/mm/tlb_nohash_low.S  | 28 ++++++++++++++++++++++++++++
 4 files changed, 48 insertions(+), 23 deletions(-)

diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index c09138d150d4..b894721dfb08 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -447,6 +447,14 @@ int main(void)
 	DEFINE(PGD_T_LOG2, PGD_T_LOG2);
 	DEFINE(PTE_T_LOG2, PTE_T_LOG2);
 #endif
+#ifdef CONFIG_FSL_BOOKE
+	DEFINE(TLBCAM_SIZE, sizeof(struct tlbcam));
+	DEFINE(TLBCAM_MAS0, offsetof(struct tlbcam, MAS0));
+	DEFINE(TLBCAM_MAS1, offsetof(struct tlbcam, MAS1));
+	DEFINE(TLBCAM_MAS2, offsetof(struct tlbcam, MAS2));
+	DEFINE(TLBCAM_MAS3, offsetof(struct tlbcam, MAS3));
+	DEFINE(TLBCAM_MAS7, offsetof(struct tlbcam, MAS7));
+#endif
 
 #ifdef CONFIG_KVM_EXIT_TIMING
 	DEFINE(VCPU_TIMING_EXIT_TBU, offsetof(struct kvm_vcpu,
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index 1ed6b52f3031..cdc7526e9c93 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -2,7 +2,7 @@
  * Modifications by Kumar Gala (galak@kernel.crashing.org) to support
  * E500 Book E processors.
  *
- * Copyright 2004 Freescale Semiconductor, Inc
+ * Copyright 2004,2010 Freescale Semiconductor, Inc.
  *
  * This file contains the routines for initializing the MMU
  * on the 4xx series of chips.
@@ -56,19 +56,13 @@
 
 unsigned int tlbcam_index;
 
-#define NUM_TLBCAMS	(64)
 
 #if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS)
 #error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS"
 #endif
 
-struct tlbcam {
-	u32	MAS0;
-	u32	MAS1;
-	unsigned long	MAS2;
-	u32	MAS3;
-	u32	MAS7;
-} TLBCAM[NUM_TLBCAMS];
+#define NUM_TLBCAMS	(64)
+struct tlbcam TLBCAM[NUM_TLBCAMS];
 
 struct tlbcamrange {
 	unsigned long start;
@@ -109,19 +103,6 @@ unsigned long p_mapped_by_tlbcam(phys_addr_t pa)
 	return 0;
 }
 
-void loadcam_entry(int idx)
-{
-	mtspr(SPRN_MAS0, TLBCAM[idx].MAS0);
-	mtspr(SPRN_MAS1, TLBCAM[idx].MAS1);
-	mtspr(SPRN_MAS2, TLBCAM[idx].MAS2);
-	mtspr(SPRN_MAS3, TLBCAM[idx].MAS3);
-
-	if (mmu_has_feature(MMU_FTR_BIG_PHYS))
-		mtspr(SPRN_MAS7, TLBCAM[idx].MAS7);
-
-	asm volatile("isync;tlbwe;isync" : : : "memory");
-}
-
 /*
  * Set up one of the I/D BAT (block address translation) register pairs.
  * The parameters are not checked; in particular size must be a power
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index d49a77503e19..0591f25a9b8c 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -149,7 +149,15 @@ extern unsigned long mmu_mapin_ram(unsigned long top);
 extern void MMU_init_hw(void);
 extern unsigned long mmu_mapin_ram(unsigned long top);
 extern void adjust_total_lowmem(void);
-
+extern void loadcam_entry(unsigned int index);
+
+struct tlbcam {
+	u32	MAS0;
+	u32	MAS1;
+	unsigned long	MAS2;
+	u32	MAS3;
+	u32	MAS7;
+};
 #elif defined(CONFIG_PPC32)
 /* anything 32-bit except 4xx or 8xx */
 extern void MMU_init_hw(void);
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index bbdc5b577b85..8656ecf9e1d7 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -271,3 +271,31 @@ _GLOBAL(set_context)
 #else
 #error Unsupported processor type !
 #endif
+
+#if defined(CONFIG_FSL_BOOKE)
+/*
+ * extern void loadcam_entry(unsigned int index)
+ *
+ * Load TLBCAM[index] entry in to the L2 CAM MMU
+ */
+_GLOBAL(loadcam_entry)
+	LOAD_REG_ADDR(r4, TLBCAM)
+	mulli	r5,r3,TLBCAM_SIZE
+	add	r3,r5,r4
+	lwz	r4,TLBCAM_MAS0(r3)
+	mtspr	SPRN_MAS0,r4
+	lwz	r4,TLBCAM_MAS1(r3)
+	mtspr	SPRN_MAS1,r4
+	PPC_LL	r4,TLBCAM_MAS2(r3)
+	mtspr	SPRN_MAS2,r4
+	lwz	r4,TLBCAM_MAS3(r3)
+	mtspr	SPRN_MAS3,r4
+BEGIN_MMU_FTR_SECTION
+	lwz	r4,TLBCAM_MAS7(r3)
+	mtspr	SPRN_MAS7,r4
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
+	isync
+	tlbwe
+	isync
+	blr
+#endif
-- 
cgit v1.2.3


From 8aa4b14eb023fecaa48d55402e98bdf84b375c4a Mon Sep 17 00:00:00 2001
From: Chen Gong <gong.chen@linux.intel.com>
Date: Sun, 30 May 2010 11:37:08 +0800
Subject: ACPI: acpi_pad: Don't needlessly mark LAPIC unstable

As suggested in Venki's suggestion in the commit 0dc698b,
add LAPIC unstable detection in the acpi_pad drvier too.

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpi_pad.c | 36 ++++++++++++++++++++++++------------
 1 file changed, 24 insertions(+), 12 deletions(-)

diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
index d269a8f3329c..446aced33aff 100644
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -46,6 +46,8 @@ static unsigned long power_saving_mwait_eax;
 
 static unsigned char tsc_detected_unstable;
 static unsigned char tsc_marked_unstable;
+static unsigned char lapic_detected_unstable;
+static unsigned char lapic_marked_unstable;
 
 static void power_saving_mwait_init(void)
 {
@@ -75,9 +77,6 @@ static void power_saving_mwait_init(void)
 	power_saving_mwait_eax = (highest_cstate << MWAIT_SUBSTATE_SIZE) |
 		(highest_subcstate - 1);
 
-	for_each_online_cpu(i)
-		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &i);
-
 #if defined(CONFIG_GENERIC_TIME) && defined(CONFIG_X86)
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
@@ -86,13 +85,15 @@ static void power_saving_mwait_init(void)
 		 * AMD Fam10h TSC will tick in all
 		 * C/P/S0/S1 states when this bit is set.
 		 */
-		if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
-			return;
-
-		/*FALL THROUGH*/
+		if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
+			tsc_detected_unstable = 1;
+		if (!boot_cpu_has(X86_FEATURE_ARAT))
+			lapic_detected_unstable = 1;
+		break;
 	default:
-		/* TSC could halt in idle */
+		/* TSC & LAPIC could halt in idle */
 		tsc_detected_unstable = 1;
+		lapic_detected_unstable = 1;
 	}
 #endif
 }
@@ -180,10 +181,20 @@ static int power_saving_thread(void *data)
 				mark_tsc_unstable("TSC halts in idle");
 				tsc_marked_unstable = 1;
 			}
+			if (lapic_detected_unstable && !lapic_marked_unstable) {
+				int i;
+				/* LAPIC could halt in idle, so notify users */
+				for_each_online_cpu(i)
+					clockevents_notify(
+						CLOCK_EVT_NOTIFY_BROADCAST_ON,
+						&i);
+				lapic_marked_unstable = 1;
+			}
 			local_irq_disable();
 			cpu = smp_processor_id();
-			clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER,
-				&cpu);
+			if (lapic_marked_unstable)
+				clockevents_notify(
+					CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
 			stop_critical_timings();
 
 			__monitor((void *)&current_thread_info()->flags, 0, 0);
@@ -192,8 +203,9 @@ static int power_saving_thread(void *data)
 				__mwait(power_saving_mwait_eax, 1);
 
 			start_critical_timings();
-			clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT,
-				&cpu);
+			if (lapic_marked_unstable)
+				clockevents_notify(
+					CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
 			local_irq_enable();
 
 			if (jiffies > expire_time) {
-- 
cgit v1.2.3


From 0b75f775288b90a83a8708a5af663a03d4bbc9ce Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Sat, 5 Jun 2010 00:34:08 -0700
Subject: Input: pcf8574_keypad - fix off by one in pcf8574_kp_irq_handler()

If nextstate == ARRAY_SIZE(lp->btncode), then we read one past the end of
the array on the next line.

This fixes a smatch warning:
drivers/input/misc/pcf8574_keypad.c +74 pcf8574_kp_irq_handler(8)
	error: buffer overflow 'lp->btncode' 17 <= 17

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/misc/pcf8574_keypad.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/misc/pcf8574_keypad.c b/drivers/input/misc/pcf8574_keypad.c
index 5c3ac4e0b055..376e54df4763 100644
--- a/drivers/input/misc/pcf8574_keypad.c
+++ b/drivers/input/misc/pcf8574_keypad.c
@@ -69,7 +69,7 @@ static irqreturn_t pcf8574_kp_irq_handler(int irq, void *dev_id)
 	unsigned char nextstate = read_state(lp);
 
 	if (lp->laststate != nextstate) {
-		int key_down = nextstate <= ARRAY_SIZE(lp->btncode);
+		int key_down = nextstate < ARRAY_SIZE(lp->btncode);
 		unsigned short keycode = key_down ?
 			lp->btncode[nextstate] : lp->btncode[lp->laststate];
 
-- 
cgit v1.2.3


From 42edb1d306d7941405b5ba5e7599ea99fc4bdf5a Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sat, 5 Jun 2010 14:42:39 +0000
Subject: sh: remove duplicated #include

Remove duplicated #include('s) in
  arch/sh/boards/mach-ecovec24/setup.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index be1d114d3a43..1d7b495a7db4 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -25,7 +25,6 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/sh_msiof.h>
 #include <linux/spi/mmc_spi.h>
-#include <linux/mmc/host.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <video/sh_mobile_lcdc.h>
-- 
cgit v1.2.3


From 9973e38575070b70c68bad177fb5056548fea349 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 7 Jun 2010 11:42:01 +0900
Subject: sh: Fix up IORESOURCE_PCI_FIXED usage in
 pcibios_fixup_device_resources().

pcibios_fixup_device_resources() presently skips over resources flagged
with IORESOURCE_PCI_FIXED, which is a remnant of the old PCI-auto code.
The only user for this at present is the Dreamast GAPSPCI code which
can't tolerate any adjustments to the BARs, but a combination of the
IORESOURCE_PCI_FIXED and zeroed out hose offsets does the right thing for
this case already, so we simply kill off the special casing.

Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/drivers/pci/pci.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 953af139e230..1e9598d2bbf4 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -139,8 +139,6 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev,
 	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
 		if (!dev->resource[i].start)
 			continue;
-		if (dev->resource[i].flags & IORESOURCE_PCI_FIXED)
-			continue;
 		if (dev->resource[i].flags & IORESOURCE_IO)
 			offset = hose->io_offset;
 		else if (dev->resource[i].flags & IORESOURCE_MEM)
-- 
cgit v1.2.3


From fc4ac7a5f5996712d9123ae4850948c640edb315 Mon Sep 17 00:00:00 2001
From: Andres Salomon <dilinger@queued.net>
Date: Sat, 5 Jun 2010 11:40:42 -0400
Subject: x86: use __ASSEMBLY__ rather than __ASSEMBLER__

As Ingo pointed out in a separate patch, we should be using __ASSEMBLY__.
Make that the case in pgtable headers.

Signed-off-by: Andres Salomon <dilinger@queued.net>
LKML-Reference: <20100605114042.35ac69c1@dev.queued.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/pgtable_32_types.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/pgtable_32_types.h b/arch/x86/include/asm/pgtable_32_types.h
index 5e67c1532314..ed5903be26fe 100644
--- a/arch/x86/include/asm/pgtable_32_types.h
+++ b/arch/x86/include/asm/pgtable_32_types.h
@@ -26,7 +26,7 @@
  */
 #define VMALLOC_OFFSET	(8 * 1024 * 1024)
 
-#ifndef __ASSEMBLER__
+#ifndef __ASSEMBLY__
 extern bool __vmalloc_start_set; /* set once high_memory is set */
 #endif
 
-- 
cgit v1.2.3


From cd9b6fdf798841eb15253f928e762eee5260d347 Mon Sep 17 00:00:00 2001
From: Oskar Schirmer <os@emlix.com>
Date: Tue, 8 Jun 2010 01:12:22 -0700
Subject: Input: ad7877 - fix spi word size to 16 bit
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

With no word size given in the users platform data, a generic spi host
controller driver will assume a default word size of eight bit. This
causes transmission to be performed bytewise, which will fail on little
endian machines for sure. Failure on big endian depends on usage
of slave select to mark word boundaries.

Anyway, ad7877 is specified to work with 16 bit per word, so
unconditionally set the word size accordingly. Flag an error where 16
bit per word is not available.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Oliver Schneidewind <osw@emlix.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/ad7877.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index 0d2d7e54b465..5f0221cffef9 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -679,6 +679,13 @@ static int __devinit ad7877_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
+	spi->bits_per_word = 16;
+	err = spi_setup(spi);
+	if (err) {
+		dev_dbg(&spi->dev, "spi master doesn't support 16 bits/word\n");
+		return err;
+	}
+
 	ts = kzalloc(sizeof(struct ad7877), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!ts || !input_dev) {
-- 
cgit v1.2.3


From dc61b1d65e353d638b2445f71fb8e5b5630f2415 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Tue, 8 Jun 2010 11:40:42 +0200
Subject: sched: Fix PROVE_RCU vs cpu_cgroup

PROVE_RCU has a few issues with the cpu_cgroup because the scheduler
typically holds rq->lock around the css rcu derefs but the generic
cgroup code doesn't (and can't) know about that lock.

Provide means to add extra checks to the css dereference and use that
in the scheduler to annotate its users.

The addition of rq->lock to these checks is correct because the
cgroup_subsys::attach() method takes the rq->lock for each task it
moves, therefore by holding that lock, we ensure the task is pinned to
the current cgroup and the RCU derefence is valid.

That leaves one genuine race in __sched_setscheduler() where we used
task_group() without holding any of the required locks and thus raced
with the cgroup code. Solve this by moving the check under the
appropriate lock.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/cgroup.h |  20 ++++++---
 kernel/sched.c         | 115 +++++++++++++++++++++++++------------------------
 2 files changed, 73 insertions(+), 62 deletions(-)

diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 0c621604baa1..e3d00fdb858d 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -525,13 +525,21 @@ static inline struct cgroup_subsys_state *cgroup_subsys_state(
 	return cgrp->subsys[subsys_id];
 }
 
-static inline struct cgroup_subsys_state *task_subsys_state(
-	struct task_struct *task, int subsys_id)
+/*
+ * function to get the cgroup_subsys_state which allows for extra
+ * rcu_dereference_check() conditions, such as locks used during the
+ * cgroup_subsys::attach() methods.
+ */
+#define task_subsys_state_check(task, subsys_id, __c)			\
+	rcu_dereference_check(task->cgroups->subsys[subsys_id],		\
+			      rcu_read_lock_held() ||			\
+			      lockdep_is_held(&task->alloc_lock) ||	\
+			      cgroup_lock_is_held() || (__c))
+
+static inline struct cgroup_subsys_state *
+task_subsys_state(struct task_struct *task, int subsys_id)
 {
-	return rcu_dereference_check(task->cgroups->subsys[subsys_id],
-				     rcu_read_lock_held() ||
-				     lockdep_is_held(&task->alloc_lock) ||
-				     cgroup_lock_is_held());
+	return task_subsys_state_check(task, subsys_id, false);
 }
 
 static inline struct cgroup* task_cgroup(struct task_struct *task,
diff --git a/kernel/sched.c b/kernel/sched.c
index f8b8996228dd..2aaceebd484c 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -306,52 +306,6 @@ static int init_task_group_load = INIT_TASK_GROUP_LOAD;
  */
 struct task_group init_task_group;
 
-/* return group to which a task belongs */
-static inline struct task_group *task_group(struct task_struct *p)
-{
-	struct task_group *tg;
-
-#ifdef CONFIG_CGROUP_SCHED
-	tg = container_of(task_subsys_state(p, cpu_cgroup_subsys_id),
-				struct task_group, css);
-#else
-	tg = &init_task_group;
-#endif
-	return tg;
-}
-
-/* Change a task's cfs_rq and parent entity if it moves across CPUs/groups */
-static inline void set_task_rq(struct task_struct *p, unsigned int cpu)
-{
-	/*
-	 * Strictly speaking this rcu_read_lock() is not needed since the
-	 * task_group is tied to the cgroup, which in turn can never go away
-	 * as long as there are tasks attached to it.
-	 *
-	 * However since task_group() uses task_subsys_state() which is an
-	 * rcu_dereference() user, this quiets CONFIG_PROVE_RCU.
-	 */
-	rcu_read_lock();
-#ifdef CONFIG_FAIR_GROUP_SCHED
-	p->se.cfs_rq = task_group(p)->cfs_rq[cpu];
-	p->se.parent = task_group(p)->se[cpu];
-#endif
-
-#ifdef CONFIG_RT_GROUP_SCHED
-	p->rt.rt_rq  = task_group(p)->rt_rq[cpu];
-	p->rt.parent = task_group(p)->rt_se[cpu];
-#endif
-	rcu_read_unlock();
-}
-
-#else
-
-static inline void set_task_rq(struct task_struct *p, unsigned int cpu) { }
-static inline struct task_group *task_group(struct task_struct *p)
-{
-	return NULL;
-}
-
 #endif	/* CONFIG_CGROUP_SCHED */
 
 /* CFS-related fields in a runqueue */
@@ -644,6 +598,49 @@ static inline int cpu_of(struct rq *rq)
 #define cpu_curr(cpu)		(cpu_rq(cpu)->curr)
 #define raw_rq()		(&__raw_get_cpu_var(runqueues))
 
+#ifdef CONFIG_CGROUP_SCHED
+
+/*
+ * Return the group to which this tasks belongs.
+ *
+ * We use task_subsys_state_check() and extend the RCU verification
+ * with lockdep_is_held(&task_rq(p)->lock) because cpu_cgroup_attach()
+ * holds that lock for each task it moves into the cgroup. Therefore
+ * by holding that lock, we pin the task to the current cgroup.
+ */
+static inline struct task_group *task_group(struct task_struct *p)
+{
+	struct cgroup_subsys_state *css;
+
+	css = task_subsys_state_check(p, cpu_cgroup_subsys_id,
+			lockdep_is_held(&task_rq(p)->lock));
+	return container_of(css, struct task_group, css);
+}
+
+/* Change a task's cfs_rq and parent entity if it moves across CPUs/groups */
+static inline void set_task_rq(struct task_struct *p, unsigned int cpu)
+{
+#ifdef CONFIG_FAIR_GROUP_SCHED
+	p->se.cfs_rq = task_group(p)->cfs_rq[cpu];
+	p->se.parent = task_group(p)->se[cpu];
+#endif
+
+#ifdef CONFIG_RT_GROUP_SCHED
+	p->rt.rt_rq  = task_group(p)->rt_rq[cpu];
+	p->rt.parent = task_group(p)->rt_se[cpu];
+#endif
+}
+
+#else /* CONFIG_CGROUP_SCHED */
+
+static inline void set_task_rq(struct task_struct *p, unsigned int cpu) { }
+static inline struct task_group *task_group(struct task_struct *p)
+{
+	return NULL;
+}
+
+#endif /* CONFIG_CGROUP_SCHED */
+
 inline void update_rq_clock(struct rq *rq)
 {
 	if (!rq->skip_clock_update)
@@ -4465,16 +4462,6 @@ recheck:
 	}
 
 	if (user) {
-#ifdef CONFIG_RT_GROUP_SCHED
-		/*
-		 * Do not allow realtime tasks into groups that have no runtime
-		 * assigned.
-		 */
-		if (rt_bandwidth_enabled() && rt_policy(policy) &&
-				task_group(p)->rt_bandwidth.rt_runtime == 0)
-			return -EPERM;
-#endif
-
 		retval = security_task_setscheduler(p, policy, param);
 		if (retval)
 			return retval;
@@ -4490,6 +4477,22 @@ recheck:
 	 * runqueue lock must be held.
 	 */
 	rq = __task_rq_lock(p);
+
+#ifdef CONFIG_RT_GROUP_SCHED
+	if (user) {
+		/*
+		 * Do not allow realtime tasks into groups that have no runtime
+		 * assigned.
+		 */
+		if (rt_bandwidth_enabled() && rt_policy(policy) &&
+				task_group(p)->rt_bandwidth.rt_runtime == 0) {
+			__task_rq_unlock(rq);
+			raw_spin_unlock_irqrestore(&p->pi_lock, flags);
+			return -EPERM;
+		}
+	}
+#endif
+
 	/* recheck policy now with rq lock held */
 	if (unlikely(oldpolicy != -1 && oldpolicy != p->policy)) {
 		policy = oldpolicy = -1;
-- 
cgit v1.2.3


From aea9d711f3d68c656ad31ab578ecfb0bb5cd7f97 Mon Sep 17 00:00:00 2001
From: Sven Wegener <sven.wegener@stealer.net>
Date: Wed, 9 Jun 2010 16:10:57 +0200
Subject: ipvs: Add missing locking during connection table hashing and
 unhashing

The code that hashes and unhashes connections from the connection table
is missing locking of the connection being modified, which opens up a
race condition and results in memory corruption when this race condition
is hit.

Here is what happens in pretty verbose form:

CPU 0					CPU 1
------------				------------
An active connection is terminated and
we schedule ip_vs_conn_expire() on this
CPU to expire this connection.

					IRQ assignment is changed to this CPU,
					but the expire timer stays scheduled on
					the other CPU.

					New connection from same ip:port comes
					in right before the timer expires, we
					find the inactive connection in our
					connection table and get a reference to
					it. We proper lock the connection in
					tcp_state_transition() and read the
					connection flags in set_tcp_state().

ip_vs_conn_expire() gets called, we
unhash the connection from our
connection table and remove the hashed
flag in ip_vs_conn_unhash(), without
proper locking!

					While still holding proper locks we
					write the connection flags in
					set_tcp_state() and this sets the hashed
					flag again.

ip_vs_conn_expire() fails to expire the
connection, because the other CPU has
incremented the reference count. We try
to re-insert the connection into our
connection table, but this fails in
ip_vs_conn_hash(), because the hashed
flag has been set by the other CPU. We
re-schedule execution of
ip_vs_conn_expire(). Now this connection
has the hashed flag set, but isn't
actually hashed in our connection table
and has a dangling list_head.

					We drop the reference we held on the
					connection and schedule the expire timer
					for timeouting the connection on this
					CPU. Further packets won't be able to
					find this connection in our connection
					table.

					ip_vs_conn_expire() gets called again,
					we think it's already hashed, but the
					list_head is dangling and while removing
					the connection from our connection table
					we write to the memory location where
					this list_head points to.

The result will probably be a kernel oops at some other point in time.

This race condition is pretty subtle, but it can be triggered remotely.
It needs the IRQ assignment change or another circumstance where packets
coming from the same ip:port for the same service are being processed on
different CPUs. And it involves hitting the exact time at which
ip_vs_conn_expire() gets called. It can be avoided by making sure that
all packets from one connection are always processed on the same CPU and
can be made harder to exploit by changing the connection timeouts to
some custom values.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Cc: stable@kernel.org
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
---
 net/netfilter/ipvs/ip_vs_conn.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index d8f7e8ef67b4..ff04e9edbed6 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -162,6 +162,7 @@ static inline int ip_vs_conn_hash(struct ip_vs_conn *cp)
 	hash = ip_vs_conn_hashkey(cp->af, cp->protocol, &cp->caddr, cp->cport);
 
 	ct_write_lock(hash);
+	spin_lock(&cp->lock);
 
 	if (!(cp->flags & IP_VS_CONN_F_HASHED)) {
 		list_add(&cp->c_list, &ip_vs_conn_tab[hash]);
@@ -174,6 +175,7 @@ static inline int ip_vs_conn_hash(struct ip_vs_conn *cp)
 		ret = 0;
 	}
 
+	spin_unlock(&cp->lock);
 	ct_write_unlock(hash);
 
 	return ret;
@@ -193,6 +195,7 @@ static inline int ip_vs_conn_unhash(struct ip_vs_conn *cp)
 	hash = ip_vs_conn_hashkey(cp->af, cp->protocol, &cp->caddr, cp->cport);
 
 	ct_write_lock(hash);
+	spin_lock(&cp->lock);
 
 	if (cp->flags & IP_VS_CONN_F_HASHED) {
 		list_del(&cp->c_list);
@@ -202,6 +205,7 @@ static inline int ip_vs_conn_unhash(struct ip_vs_conn *cp)
 	} else
 		ret = 0;
 
+	spin_unlock(&cp->lock);
 	ct_write_unlock(hash);
 
 	return ret;
-- 
cgit v1.2.3


From 4673247562e39a17e09440fa1400819522ccd446 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Mon, 7 Jun 2010 17:53:51 +0200
Subject: genirq: Deal with desc->set_type() changing desc->chip

The set_type() function can change the chip implementation when the
trigger mode changes. That might result in using an non-initialized
irq chip when called from __setup_irq() or when called via
set_irq_type() on an already enabled irq.

The set_irq_type() function should not be called on an enabled irq,
but because we forgot to put a check into it, we have a bunch of users
which grew the habit of doing that and it never blew up as the
function is serialized via desc->lock against all users of desc->chip
and they never hit the non-initialized irq chip issue.

The easy fix for the __setup_irq() issue would be to move the
irq_chip_set_defaults(desc->chip) call after the trigger setting to
make sure that a chip change is covered.

But as we have already users, which do the type setting after
request_irq(), the safe fix for now is to call irq_chip_set_defaults()
from __irq_set_trigger() when desc->set_type() changed the irq chip.

It needs a deeper analysis whether we should refuse to change the chip
on an already enabled irq, but that'd be a large scale change to fix
all the existing users. So that's neither stable nor 2.6.35 material.

Reported-by: Esben Haabendal <eha@doredevelopment.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev <linuxppc-dev@ozlabs.org>
Cc: stable@kernel.org
---
 kernel/irq/manage.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 3164ba7ce151..e1497481fe8a 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -456,6 +456,9 @@ int __irq_set_trigger(struct irq_desc *desc, unsigned int irq,
 		/* note that IRQF_TRIGGER_MASK == IRQ_TYPE_SENSE_MASK */
 		desc->status &= ~(IRQ_LEVEL | IRQ_TYPE_SENSE_MASK);
 		desc->status |= flags;
+
+		if (chip != desc->chip)
+			irq_chip_set_defaults(desc->chip);
 	}
 
 	return ret;
-- 
cgit v1.2.3


From f5dec51172b81db226a23f309bc737ad021af35b Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Wed, 9 Jun 2010 08:13:06 -0700
Subject: Input: sysrq - fix "stuck" SysRq mode
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This shoud fix the problem with SysRq mode staying half-way enabled
and interfereing with normal PrtScrn operation after user presses ALT
for the first time.

Reported-and-tested-by: Éric Piel <E.A.B.Piel@tudelft.nl>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/char/sysrq.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index 5d15630a5830..5d64e3acb000 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -580,8 +580,12 @@ static bool sysrq_filter(struct input_handle *handle, unsigned int type,
 	case KEY_RIGHTALT:
 		if (value)
 			sysrq_alt = code;
-		else if (sysrq_down && code == sysrq_alt_use)
-			sysrq_down = false;
+		else {
+			if (sysrq_down && code == sysrq_alt_use)
+				sysrq_down = false;
+
+			sysrq_alt = 0;
+		}
 		break;
 
 	case KEY_SYSRQ:
-- 
cgit v1.2.3


From a4384df3e24579d6292a1b3b41d500349948f30b Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Tue, 8 Jun 2010 11:44:32 -0700
Subject: x86, irq: Rename gsi_end gsi_top, and fix off by one errors

When I introduced the global variable gsi_end I thought gsi_end on
io_apics was one past the end of the gsi range for the io_apic.  After
it was pointed out the the range on io_apics was inclusive I changed
my global variable to match.  That was a big mistake.  Inclusive
semantics without a range start cannot describe the case when no gsi's
are allocated.  Describing the case where no gsi's are allocated is
important in sfi.c and mpparse.c so that we can assign gsi numbers
instead of blindly copying the gsi assignments the BIOS has done as we
do in the acpi case.

To keep from getting the global variable confused with the gsi range
end rename it gsi_top.

To allow describing the case where no gsi's are allocated have gsi_top
be one place the highest gsi number seen in the system.

This fixes an off by one bug in sfi.c:
Reported-by: jacob pan <jacob.jun.pan@linux.intel.com>

This fixes the same off by one bug in mpparse.c:

This fixes an off unreachable by one bug in acpi/boot.c:irq_to_gsi
Reported-by: Yinghai <yinghai.lu@oracle.com>

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <m17hm9jre7.fsf_-_@fess.ebiederm.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/io_apic.h |  4 ++--
 arch/x86/kernel/acpi/boot.c    |  8 ++++----
 arch/x86/kernel/apic/io_apic.c | 12 ++++++------
 arch/x86/kernel/mpparse.c      |  2 +-
 arch/x86/kernel/sfi.c          |  2 +-
 5 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 63cb4096c3dc..9cb2edb87c2f 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -183,7 +183,7 @@ struct mp_ioapic_gsi{
 	u32 gsi_end;
 };
 extern struct mp_ioapic_gsi  mp_gsi_routing[];
-extern u32 gsi_end;
+extern u32 gsi_top;
 int mp_find_ioapic(u32 gsi);
 int mp_find_ioapic_pin(int ioapic, u32 gsi);
 void __init mp_register_ioapic(int id, u32 address, u32 gsi_base);
@@ -197,7 +197,7 @@ static const int timer_through_8259 = 0;
 static inline void ioapic_init_mappings(void)	{ }
 static inline void ioapic_insert_resources(void) { }
 static inline void probe_nr_irqs_gsi(void)	{ }
-#define gsi_end (NR_IRQS_LEGACY - 1)
+#define gsi_top (NR_IRQS_LEGACY)
 static inline int mp_find_ioapic(u32 gsi) { return 0; }
 
 struct io_apic_irq_attr;
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 60cc4058ed5f..c05872aa3ce0 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -118,7 +118,7 @@ static unsigned int gsi_to_irq(unsigned int gsi)
 	if (gsi >= NR_IRQS_LEGACY)
 		irq = gsi;
 	else
-		irq = gsi_end + 1 + gsi;
+		irq = gsi_top + gsi;
 
 	return irq;
 }
@@ -129,10 +129,10 @@ static u32 irq_to_gsi(int irq)
 
 	if (irq < NR_IRQS_LEGACY)
 		gsi = isa_irq_to_gsi[irq];
-	else if (irq <= gsi_end)
+	else if (irq < gsi_top)
 		gsi = irq;
-	else if (irq <= (gsi_end + NR_IRQS_LEGACY))
-		gsi = irq - gsi_end;
+	else if (irq < (gsi_top + NR_IRQS_LEGACY))
+		gsi = irq - gsi_top;
 	else
 		gsi = 0xffffffff;
 
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 33f3563a2a52..e41ed24ab26d 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -89,8 +89,8 @@ int nr_ioapics;
 /* IO APIC gsi routing info */
 struct mp_ioapic_gsi  mp_gsi_routing[MAX_IO_APICS];
 
-/* The last gsi number used */
-u32 gsi_end;
+/* The one past the highest gsi number used */
+u32 gsi_top;
 
 /* MP IRQ source entries */
 struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
@@ -1035,7 +1035,7 @@ static int pin_2_irq(int idx, int apic, int pin)
 		if (gsi >= NR_IRQS_LEGACY)
 			irq = gsi;
 		else
-			irq = gsi_end + 1 + gsi;
+			irq = gsi_top + gsi;
 	}
 
 #ifdef CONFIG_X86_32
@@ -3853,7 +3853,7 @@ void __init probe_nr_irqs_gsi(void)
 {
 	int nr;
 
-	nr = gsi_end + 1 + NR_IRQS_LEGACY;
+	nr = gsi_top + NR_IRQS_LEGACY;
 	if (nr > nr_irqs_gsi)
 		nr_irqs_gsi = nr;
 
@@ -4294,8 +4294,8 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
 	 */
 	nr_ioapic_registers[idx] = entries;
 
-	if (mp_gsi_routing[idx].gsi_end > gsi_end)
-		gsi_end = mp_gsi_routing[idx].gsi_end;
+	if (mp_gsi_routing[idx].gsi_end >= gsi_top)
+		gsi_top = mp_gsi_routing[idx].gsi_end + 1;
 
 	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
 	       "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 5ae5d2426edf..d86dbf7e54be 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -123,7 +123,7 @@ static void __init MP_ioapic_info(struct mpc_ioapic *m)
 	printk(KERN_INFO "I/O APIC #%d Version %d at 0x%X.\n",
 	       m->apicid, m->apicver, m->apicaddr);
 
-	mp_register_ioapic(m->apicid, m->apicaddr, gsi_end + 1);
+	mp_register_ioapic(m->apicid, m->apicaddr, gsi_top);
 }
 
 static void print_MP_intsrc_info(struct mpc_intsrc *m)
diff --git a/arch/x86/kernel/sfi.c b/arch/x86/kernel/sfi.c
index 7ded57896c0a..cb22acf3ed09 100644
--- a/arch/x86/kernel/sfi.c
+++ b/arch/x86/kernel/sfi.c
@@ -93,7 +93,7 @@ static int __init sfi_parse_ioapic(struct sfi_table_header *table)
 	pentry = (struct sfi_apic_table_entry *)sb->pentry;
 
 	for (i = 0; i < num; i++) {
-		mp_register_ioapic(i, pentry->phys_addr, gsi_end + 1);
+		mp_register_ioapic(i, pentry->phys_addr, gsi_top);
 		pentry++;
 	}
 
-- 
cgit v1.2.3


From 75cbfb97a156dd3dabdc81295fb8144576332366 Mon Sep 17 00:00:00 2001
From: Thomas Renninger <trenn@suse.de>
Date: Wed, 26 May 2010 17:03:33 +0200
Subject: ACPI: Do not try to set up acpi processor stuff on cores exceeding
 maxcpus=

Patch is against latest Linus master branch and is expected to be
safe bug fix.

You get:
ACPI: HARDWARE addr space,NOT supported yet
for each ACPI defined CPU which status is active, but exceeds
maxcpus= count.

As these "not booted" CPUs do not run an idle routine
and echo X >/proc/acpi/processor/*/throttling did not work
I couldn't find a way to really access not onlined/booted
machines. Still this should get fixed and
/proc/acpi/processor/X dirs of cores exceeding maxcpus
should not show up.

I wonder whether this could get cleaned up by truncating possible cpu mask
and nr_cpu_ids to setup_max_cpus early some day
(and not exporting setup_max_cpus anymore then).
But this needs touching of a lot other places...

Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: travis@sgi.com
CC: linux-acpi@vger.kernel.org
CC: lenb@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/processor_driver.c | 5 +++++
 init/main.c                     | 4 +++-
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index b1034a9ada4e..38ea0cc6dc49 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -581,6 +581,11 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device)
 		return 0;
 	}
 
+#ifdef CONFIG_SMP
+	if (pr->id >= setup_max_cpus && pr->id != 0)
+		return 0;
+#endif
+
 	BUG_ON((pr->id >= nr_cpu_ids) || (pr->id < 0));
 
 	/*
diff --git a/init/main.c b/init/main.c
index 3bdb152f412f..ac2e4a5f59ee 100644
--- a/init/main.c
+++ b/init/main.c
@@ -125,7 +125,9 @@ static char *ramdisk_execute_command;
 
 #ifdef CONFIG_SMP
 /* Setup configured maximum number of CPUs to activate */
-unsigned int __initdata setup_max_cpus = NR_CPUS;
+unsigned int setup_max_cpus = NR_CPUS;
+EXPORT_SYMBOL(setup_max_cpus);
+
 
 /*
  * Setup routine for controlling SMP activation
-- 
cgit v1.2.3


From 1d90f2e707e75afdb6b644f774cf5e54dc9c33fc Mon Sep 17 00:00:00 2001
From: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Wed, 9 Jun 2010 07:13:16 -0300
Subject: perf record: Don't call newt functions when not initialized
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

When processing events we want to give visual feedback to the user when
using the newt browser, so there are ui_progress calls in
__perf_session__process_events, but those should check if newt is being
used.

Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100609123530.GB9471@ghostprotocols.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
 tools/perf/util/newt.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/newt.c b/tools/perf/util/newt.c
index cf182ca132fe..7537ca15900b 100644
--- a/tools/perf/util/newt.c
+++ b/tools/perf/util/newt.c
@@ -43,6 +43,9 @@ struct ui_progress *ui_progress__new(const char *title, u64 total)
 
 	if (self != NULL) {
 		int cols;
+
+		if (use_browser <= 0)	
+			return self;
 		newtGetScreenSize(&cols, NULL);
 		cols -= 4;
 		newtCenteredWindow(cols, 1, title);
@@ -67,14 +70,22 @@ out_free_self:
 
 void ui_progress__update(struct ui_progress *self, u64 curr)
 {
+	/*
+	 * FIXME: We should have a per UI backend way of showing progress,
+	 * stdio will just show a percentage as NN%, etc.
+	 */
+	if (use_browser <= 0)
+		return;
 	newtScaleSet(self->scale, curr);
 	newtRefresh();
 }
 
 void ui_progress__delete(struct ui_progress *self)
 {
-	newtFormDestroy(self->form);
-	newtPopWindow();
+	if (use_browser > 0) {
+		newtFormDestroy(self->form);
+		newtPopWindow();
+	}
 	free(self);
 }
 
-- 
cgit v1.2.3


From d11007703c31db534674ebeeb9eb047bbbe758bd Mon Sep 17 00:00:00 2001
From: Stephane Eranian <eranian@google.com>
Date: Thu, 10 Jun 2010 13:25:01 +0200
Subject: perf_events: Fix Intel Westmere event constraints

Based on Intel Vol3b (March 2010), the event
SNOOPQ_REQUEST_OUTSTANDING is restricted to counters 0,1 so
update the event table for Intel Westmere accordingly.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: paulus@samba.org
Cc: davem@davemloft.net
Cc: fweisbec@gmail.com
Cc: perfmon2-devel@lists.sf.net
Cc: eranian@gmail.com
Cc: <stable@kernel.org> # .34.x
LKML-Reference: <4c10cb56.5120e30a.2eb4.ffffc3de@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_event_intel.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index fdbc652d3feb..214ac860ebe0 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -72,6 +72,7 @@ static struct event_constraint intel_westmere_event_constraints[] =
 	INTEL_EVENT_CONSTRAINT(0x51, 0x3), /* L1D */
 	INTEL_EVENT_CONSTRAINT(0x60, 0x1), /* OFFCORE_REQUESTS_OUTSTANDING */
 	INTEL_EVENT_CONSTRAINT(0x63, 0x3), /* CACHE_LOCK_CYCLES */
+	INTEL_EVENT_CONSTRAINT(0xb3, 0x1), /* SNOOPQ_REQUEST_OUTSTANDING */
 	EVENT_CONSTRAINT_END
 };
 
-- 
cgit v1.2.3


From dd4c4f17d722ffeb2515bf781400675a30fcead7 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg@redhat.com>
Date: Fri, 28 May 2010 16:32:14 -0400
Subject: suspend: Move NVS save/restore code to generic suspend functionality

Saving platform non-volatile state may be required for suspend to RAM as
well as hibernation. Move it to more generic code.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 arch/x86/kernel/e820.c       |   2 +-
 drivers/acpi/sleep.c         |  12 ++--
 include/linux/suspend.h      |  26 ++++-----
 kernel/power/Kconfig         |   9 +--
 kernel/power/Makefile        |   2 +-
 kernel/power/hibernate_nvs.c | 136 -------------------------------------------
 kernel/power/nvs.c           | 136 +++++++++++++++++++++++++++++++++++++++++++
 kernel/power/suspend.c       |   6 ++
 8 files changed, 168 insertions(+), 161 deletions(-)
 delete mode 100644 kernel/power/hibernate_nvs.c
 create mode 100644 kernel/power/nvs.c

diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 7bca3c6a02fb..0d6fc71bedb1 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -729,7 +729,7 @@ static int __init e820_mark_nvs_memory(void)
 		struct e820entry *ei = &e820.map[i];
 
 		if (ei->type == E820_NVS)
-			hibernate_nvs_register(ei->addr, ei->size);
+			suspend_nvs_register(ei->addr, ei->size);
 	}
 
 	return 0;
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 4ab2275b4461..bcaa6efa8136 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -393,7 +393,7 @@ static int acpi_hibernation_begin(void)
 {
 	int error;
 
-	error = s4_no_nvs ? 0 : hibernate_nvs_alloc();
+	error = s4_no_nvs ? 0 : suspend_nvs_alloc();
 	if (!error) {
 		acpi_target_sleep_state = ACPI_STATE_S4;
 		acpi_sleep_tts_switch(acpi_target_sleep_state);
@@ -407,7 +407,7 @@ static int acpi_hibernation_pre_snapshot(void)
 	int error = acpi_pm_prepare();
 
 	if (!error)
-		hibernate_nvs_save();
+		suspend_nvs_save();
 
 	return error;
 }
@@ -432,7 +432,7 @@ static int acpi_hibernation_enter(void)
 
 static void acpi_hibernation_finish(void)
 {
-	hibernate_nvs_free();
+	suspend_nvs_free();
 	acpi_pm_finish();
 }
 
@@ -452,7 +452,7 @@ static void acpi_hibernation_leave(void)
 		panic("ACPI S4 hardware signature mismatch");
 	}
 	/* Restore the NVS memory area */
-	hibernate_nvs_restore();
+	suspend_nvs_restore();
 }
 
 static int acpi_pm_pre_restore(void)
@@ -501,7 +501,7 @@ static int acpi_hibernation_begin_old(void)
 
 	if (!error) {
 		if (!s4_no_nvs)
-			error = hibernate_nvs_alloc();
+			error = suspend_nvs_alloc();
 		if (!error)
 			acpi_target_sleep_state = ACPI_STATE_S4;
 	}
@@ -513,7 +513,7 @@ static int acpi_hibernation_pre_snapshot_old(void)
 	int error = acpi_pm_disable_gpes();
 
 	if (!error)
-		hibernate_nvs_save();
+		suspend_nvs_save();
 
 	return error;
 }
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 5e781d824e6d..bc7d6bb4cd8e 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -256,22 +256,22 @@ static inline int hibernate(void) { return -ENOSYS; }
 static inline bool system_entering_hibernation(void) { return false; }
 #endif /* CONFIG_HIBERNATION */
 
-#ifdef CONFIG_HIBERNATION_NVS
-extern int hibernate_nvs_register(unsigned long start, unsigned long size);
-extern int hibernate_nvs_alloc(void);
-extern void hibernate_nvs_free(void);
-extern void hibernate_nvs_save(void);
-extern void hibernate_nvs_restore(void);
-#else /* CONFIG_HIBERNATION_NVS */
-static inline int hibernate_nvs_register(unsigned long a, unsigned long b)
+#ifdef CONFIG_SUSPEND_NVS
+extern int suspend_nvs_register(unsigned long start, unsigned long size);
+extern int suspend_nvs_alloc(void);
+extern void suspend_nvs_free(void);
+extern void suspend_nvs_save(void);
+extern void suspend_nvs_restore(void);
+#else /* CONFIG_SUSPEND_NVS */
+static inline int suspend_nvs_register(unsigned long a, unsigned long b)
 {
 	return 0;
 }
-static inline int hibernate_nvs_alloc(void) { return 0; }
-static inline void hibernate_nvs_free(void) {}
-static inline void hibernate_nvs_save(void) {}
-static inline void hibernate_nvs_restore(void) {}
-#endif /* CONFIG_HIBERNATION_NVS */
+static inline int suspend_nvs_alloc(void) { return 0; }
+static inline void suspend_nvs_free(void) {}
+static inline void suspend_nvs_save(void) {}
+static inline void suspend_nvs_restore(void) {}
+#endif /* CONFIG_SUSPEND_NVS */
 
 #ifdef CONFIG_PM_SLEEP
 void save_processor_state(void);
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 5c36ea9d55d2..ca6066a6952e 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -99,9 +99,13 @@ config PM_SLEEP_ADVANCED_DEBUG
 	depends on PM_ADVANCED_DEBUG
 	default n
 
+config SUSPEND_NVS
+       bool
+
 config SUSPEND
 	bool "Suspend to RAM and standby"
 	depends on PM && ARCH_SUSPEND_POSSIBLE
+	select SUSPEND_NVS if HAS_IOMEM
 	default y
 	---help---
 	  Allow the system to enter sleep states in which main memory is
@@ -130,13 +134,10 @@ config SUSPEND_FREEZER
 
 	  Turning OFF this setting is NOT recommended! If in doubt, say Y.
 
-config HIBERNATION_NVS
-	bool
-
 config HIBERNATION
 	bool "Hibernation (aka 'suspend to disk')"
 	depends on PM && SWAP && ARCH_HIBERNATION_POSSIBLE
-	select HIBERNATION_NVS if HAS_IOMEM
+	select SUSPEND_NVS if HAS_IOMEM
 	---help---
 	  Enable the suspend to disk (STD) functionality, which is usually
 	  called "hibernation" in user interfaces.  STD checkpoints the
diff --git a/kernel/power/Makefile b/kernel/power/Makefile
index 524e058dcf06..f9063c6b185d 100644
--- a/kernel/power/Makefile
+++ b/kernel/power/Makefile
@@ -10,6 +10,6 @@ obj-$(CONFIG_SUSPEND)		+= suspend.o
 obj-$(CONFIG_PM_TEST_SUSPEND)	+= suspend_test.o
 obj-$(CONFIG_HIBERNATION)	+= hibernate.o snapshot.o swap.o user.o \
 				   block_io.o
-obj-$(CONFIG_HIBERNATION_NVS)	+= hibernate_nvs.o
+obj-$(CONFIG_SUSPEND_NVS)	+= nvs.o
 
 obj-$(CONFIG_MAGIC_SYSRQ)	+= poweroff.o
diff --git a/kernel/power/hibernate_nvs.c b/kernel/power/hibernate_nvs.c
deleted file mode 100644
index fdcad9ed5a7b..000000000000
--- a/kernel/power/hibernate_nvs.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * linux/kernel/power/hibernate_nvs.c - Routines for handling NVS memory
- *
- * Copyright (C) 2008,2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
- *
- * This file is released under the GPLv2.
- */
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/suspend.h>
-
-/*
- * Platforms, like ACPI, may want us to save some memory used by them during
- * hibernation and to restore the contents of this memory during the subsequent
- * resume.  The code below implements a mechanism allowing us to do that.
- */
-
-struct nvs_page {
-	unsigned long phys_start;
-	unsigned int size;
-	void *kaddr;
-	void *data;
-	struct list_head node;
-};
-
-static LIST_HEAD(nvs_list);
-
-/**
- *	hibernate_nvs_register - register platform NVS memory region to save
- *	@start - physical address of the region
- *	@size - size of the region
- *
- *	The NVS region need not be page-aligned (both ends) and we arrange
- *	things so that the data from page-aligned addresses in this region will
- *	be copied into separate RAM pages.
- */
-int hibernate_nvs_register(unsigned long start, unsigned long size)
-{
-	struct nvs_page *entry, *next;
-
-	while (size > 0) {
-		unsigned int nr_bytes;
-
-		entry = kzalloc(sizeof(struct nvs_page), GFP_KERNEL);
-		if (!entry)
-			goto Error;
-
-		list_add_tail(&entry->node, &nvs_list);
-		entry->phys_start = start;
-		nr_bytes = PAGE_SIZE - (start & ~PAGE_MASK);
-		entry->size = (size < nr_bytes) ? size : nr_bytes;
-
-		start += entry->size;
-		size -= entry->size;
-	}
-	return 0;
-
- Error:
-	list_for_each_entry_safe(entry, next, &nvs_list, node) {
-		list_del(&entry->node);
-		kfree(entry);
-	}
-	return -ENOMEM;
-}
-
-/**
- *	hibernate_nvs_free - free data pages allocated for saving NVS regions
- */
-void hibernate_nvs_free(void)
-{
-	struct nvs_page *entry;
-
-	list_for_each_entry(entry, &nvs_list, node)
-		if (entry->data) {
-			free_page((unsigned long)entry->data);
-			entry->data = NULL;
-			if (entry->kaddr) {
-				iounmap(entry->kaddr);
-				entry->kaddr = NULL;
-			}
-		}
-}
-
-/**
- *	hibernate_nvs_alloc - allocate memory necessary for saving NVS regions
- */
-int hibernate_nvs_alloc(void)
-{
-	struct nvs_page *entry;
-
-	list_for_each_entry(entry, &nvs_list, node) {
-		entry->data = (void *)__get_free_page(GFP_KERNEL);
-		if (!entry->data) {
-			hibernate_nvs_free();
-			return -ENOMEM;
-		}
-	}
-	return 0;
-}
-
-/**
- *	hibernate_nvs_save - save NVS memory regions
- */
-void hibernate_nvs_save(void)
-{
-	struct nvs_page *entry;
-
-	printk(KERN_INFO "PM: Saving platform NVS memory\n");
-
-	list_for_each_entry(entry, &nvs_list, node)
-		if (entry->data) {
-			entry->kaddr = ioremap(entry->phys_start, entry->size);
-			memcpy(entry->data, entry->kaddr, entry->size);
-		}
-}
-
-/**
- *	hibernate_nvs_restore - restore NVS memory regions
- *
- *	This function is going to be called with interrupts disabled, so it
- *	cannot iounmap the virtual addresses used to access the NVS region.
- */
-void hibernate_nvs_restore(void)
-{
-	struct nvs_page *entry;
-
-	printk(KERN_INFO "PM: Restoring platform NVS memory\n");
-
-	list_for_each_entry(entry, &nvs_list, node)
-		if (entry->data)
-			memcpy(entry->kaddr, entry->data, entry->size);
-}
diff --git a/kernel/power/nvs.c b/kernel/power/nvs.c
new file mode 100644
index 000000000000..1836db60bbb6
--- /dev/null
+++ b/kernel/power/nvs.c
@@ -0,0 +1,136 @@
+/*
+ * linux/kernel/power/hibernate_nvs.c - Routines for handling NVS memory
+ *
+ * Copyright (C) 2008,2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+
+/*
+ * Platforms, like ACPI, may want us to save some memory used by them during
+ * suspend and to restore the contents of this memory during the subsequent
+ * resume.  The code below implements a mechanism allowing us to do that.
+ */
+
+struct nvs_page {
+	unsigned long phys_start;
+	unsigned int size;
+	void *kaddr;
+	void *data;
+	struct list_head node;
+};
+
+static LIST_HEAD(nvs_list);
+
+/**
+ *	suspend_nvs_register - register platform NVS memory region to save
+ *	@start - physical address of the region
+ *	@size - size of the region
+ *
+ *	The NVS region need not be page-aligned (both ends) and we arrange
+ *	things so that the data from page-aligned addresses in this region will
+ *	be copied into separate RAM pages.
+ */
+int suspend_nvs_register(unsigned long start, unsigned long size)
+{
+	struct nvs_page *entry, *next;
+
+	while (size > 0) {
+		unsigned int nr_bytes;
+
+		entry = kzalloc(sizeof(struct nvs_page), GFP_KERNEL);
+		if (!entry)
+			goto Error;
+
+		list_add_tail(&entry->node, &nvs_list);
+		entry->phys_start = start;
+		nr_bytes = PAGE_SIZE - (start & ~PAGE_MASK);
+		entry->size = (size < nr_bytes) ? size : nr_bytes;
+
+		start += entry->size;
+		size -= entry->size;
+	}
+	return 0;
+
+ Error:
+	list_for_each_entry_safe(entry, next, &nvs_list, node) {
+		list_del(&entry->node);
+		kfree(entry);
+	}
+	return -ENOMEM;
+}
+
+/**
+ *	suspend_nvs_free - free data pages allocated for saving NVS regions
+ */
+void suspend_nvs_free(void)
+{
+	struct nvs_page *entry;
+
+	list_for_each_entry(entry, &nvs_list, node)
+		if (entry->data) {
+			free_page((unsigned long)entry->data);
+			entry->data = NULL;
+			if (entry->kaddr) {
+				iounmap(entry->kaddr);
+				entry->kaddr = NULL;
+			}
+		}
+}
+
+/**
+ *	suspend_nvs_alloc - allocate memory necessary for saving NVS regions
+ */
+int suspend_nvs_alloc(void)
+{
+	struct nvs_page *entry;
+
+	list_for_each_entry(entry, &nvs_list, node) {
+		entry->data = (void *)__get_free_page(GFP_KERNEL);
+		if (!entry->data) {
+			suspend_nvs_free();
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+/**
+ *	suspend_nvs_save - save NVS memory regions
+ */
+void suspend_nvs_save(void)
+{
+	struct nvs_page *entry;
+
+	printk(KERN_INFO "PM: Saving platform NVS memory\n");
+
+	list_for_each_entry(entry, &nvs_list, node)
+		if (entry->data) {
+			entry->kaddr = ioremap(entry->phys_start, entry->size);
+			memcpy(entry->data, entry->kaddr, entry->size);
+		}
+}
+
+/**
+ *	suspend_nvs_restore - restore NVS memory regions
+ *
+ *	This function is going to be called with interrupts disabled, so it
+ *	cannot iounmap the virtual addresses used to access the NVS region.
+ */
+void suspend_nvs_restore(void)
+{
+	struct nvs_page *entry;
+
+	printk(KERN_INFO "PM: Restoring platform NVS memory\n");
+
+	list_for_each_entry(entry, &nvs_list, node)
+		if (entry->data)
+			memcpy(entry->kaddr, entry->data, entry->size);
+}
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index 56e7dbb8b996..f37cb7dd4402 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -16,6 +16,12 @@
 #include <linux/cpu.h>
 #include <linux/syscalls.h>
 #include <linux/gfp.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
 
 #include "power.h"
 
-- 
cgit v1.2.3


From 2a6b69765ad794389f2fc3e14a0afa1a995221c2 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg@redhat.com>
Date: Fri, 28 May 2010 16:32:15 -0400
Subject: ACPI: Store NVS state even when entering suspend to RAM

https://bugzilla.kernel.org/show_bug.cgi?id=13931 describes a bug where
a system fails to successfully resume after the second suspend. Maxim
Levitsky discovered that this could be rectified by forcibly saving
and restoring the ACPI non-volatile state. The spec indicates that this
is only required for S4, but testing the behaviour of Windows by adding
an ACPI NVS region to qemu's e820 map and registering a custom memory
read/write handler reveals that it's saved and restored even over suspend
to RAM. We should mimic that behaviour to avoid other broken platforms.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/sleep.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index bcaa6efa8136..403daf0fc8a0 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -112,6 +112,8 @@ static int __acpi_pm_prepare(void)
 {
 	int error = acpi_sleep_prepare(acpi_target_sleep_state);
 
+	suspend_nvs_save();
+
 	if (error)
 		acpi_target_sleep_state = ACPI_STATE_S0;
 	return error;
@@ -140,6 +142,8 @@ static void acpi_pm_finish(void)
 {
 	u32 acpi_state = acpi_target_sleep_state;
 
+	suspend_nvs_free();
+
 	if (acpi_state == ACPI_STATE_S0)
 		return;
 
@@ -189,6 +193,11 @@ static int acpi_suspend_begin(suspend_state_t pm_state)
 	u32 acpi_state = acpi_suspend_states[pm_state];
 	int error = 0;
 
+	error = suspend_nvs_alloc();
+
+	if (error)
+		return error;
+
 	if (sleep_states[acpi_state]) {
 		acpi_target_sleep_state = acpi_state;
 		acpi_sleep_tts_switch(acpi_target_sleep_state);
@@ -264,6 +273,8 @@ static int acpi_suspend_enter(suspend_state_t pm_state)
 	if (acpi_state == ACPI_STATE_S3)
 		acpi_restore_state_mem();
 
+	suspend_nvs_restore();
+
 	return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 }
 
@@ -430,12 +441,6 @@ static int acpi_hibernation_enter(void)
 	return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 }
 
-static void acpi_hibernation_finish(void)
-{
-	suspend_nvs_free();
-	acpi_pm_finish();
-}
-
 static void acpi_hibernation_leave(void)
 {
 	/*
@@ -473,7 +478,7 @@ static struct platform_hibernation_ops acpi_hibernation_ops = {
 	.begin = acpi_hibernation_begin,
 	.end = acpi_pm_end,
 	.pre_snapshot = acpi_hibernation_pre_snapshot,
-	.finish = acpi_hibernation_finish,
+	.finish = acpi_pm_finish,
 	.prepare = acpi_pm_prepare,
 	.enter = acpi_hibernation_enter,
 	.leave = acpi_hibernation_leave,
@@ -526,7 +531,7 @@ static struct platform_hibernation_ops acpi_hibernation_ops_old = {
 	.begin = acpi_hibernation_begin_old,
 	.end = acpi_pm_end,
 	.pre_snapshot = acpi_hibernation_pre_snapshot_old,
-	.finish = acpi_hibernation_finish,
+	.finish = acpi_pm_finish,
 	.prepare = acpi_pm_disable_gpes,
 	.enter = acpi_hibernation_enter,
 	.leave = acpi_hibernation_leave,
-- 
cgit v1.2.3


From 934231de706d2579fae14f5857fcd8de991009ff Mon Sep 17 00:00:00 2001
From: Liang Li <liang.li@windriver.com>
Date: Thu, 10 Jun 2010 13:42:49 +0800
Subject: ACPI: fan: fix unbalanced code block

The code block braced with CONFIG_ACPI_PROCFS is unblanced. When
CONFIG_ACPI_PROCFS=n, kernel trace will be produced like:

Call Trace:
 [<c111637d>] ? remove_proc_entry+0x20d/0x290
 [<c111637d>] ? remove_proc_entry+0x20d/0x290
 [<c103b02c>] warn_slowpath_common+0x6c/0xc0
 [<c111637d>] ? remove_proc_entry+0x20d/0x290
 [<c103b0c6>] warn_slowpath_fmt+0x26/0x30
 [<c111637d>] remove_proc_entry+0x20d/0x290
 [<c1116bd7>] ? proc_register+0x117/0x1f0
 [<c1116e83>] ? proc_mkdir_mode+0x33/0x50
 [<c14f483c>] ? acpi_fan_init+0x0/0x2c
 [<c14f485f>] acpi_fan_init+0x23/0x2c
 [<c1001123>] do_one_initcall+0x23/0x180
 [<c107dcf7>] ? init_irq_proc+0x67/0x80
 [<c14d43bd>] kernel_init+0x13c/0x20e
 [<c1030e50>] ? schedule_tail+0x20/0x90
 [<c1389e06>] ? syscall_exit+0x5/0x16
 [<c14d4281>] ? kernel_init+0x0/0x20e
 [<c14d4281>] ? kernel_init+0x0/0x20e
 [<c10032f6>] kernel_thread_helper+0x6/0x30
---[ end trace a7919e7f17c0a725 ]---

Then also bracket later error checking code with ACPI_PROCFS
option to avoid mismatch problem.

Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/fan.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index acf2ab249842..8a3b840c0bb2 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -347,7 +347,6 @@ static int __init acpi_fan_init(void)
 {
 	int result = 0;
 
-
 #ifdef CONFIG_ACPI_PROCFS
 	acpi_fan_dir = proc_mkdir(ACPI_FAN_CLASS, acpi_root_dir);
 	if (!acpi_fan_dir)
@@ -356,7 +355,9 @@ static int __init acpi_fan_init(void)
 
 	result = acpi_bus_register_driver(&acpi_fan_driver);
 	if (result < 0) {
+#ifdef CONFIG_ACPI_PROCFS
 		remove_proc_entry(ACPI_FAN_CLASS, acpi_root_dir);
+#endif
 		return -ENODEV;
 	}
 
-- 
cgit v1.2.3


From 4b1b29bc8801badd243694add02262e0955dde1b Mon Sep 17 00:00:00 2001
From: Zhang Rui <rui.zhang@intel.com>
Date: Tue, 8 Jun 2010 15:28:40 +0800
Subject: ACPI: Disable Vista compatibility for Sony VGN-NS50B_L

Disable Vista compatibility for Sony VGN-NS50B_L.
https://bugzilla.kernel.org/show_bug.cgi?id=12904#c46

Note that this change is a workaround, not a permanent fix.
For the permanent fix is to figure out what compatibility
means and to actually be compatible...

Tested-by: Voldemar <harestomper@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/blacklist.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 2815df66f6f7..01381be05e96 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -218,6 +218,14 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
 		},
 	},
 	{
+	.callback = dmi_disable_osi_vista,
+	.ident = "VGN-NS50B_L",
+	.matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NS50B_L"),
+		},
+	},
+	{
 	.callback = dmi_disable_osi_win7,
 	.ident = "ASUS K50IJ",
 	.matches = {
-- 
cgit v1.2.3


From 23b764d056bfec0a212a67229074ac281e86e021 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Thu, 10 Jun 2010 13:10:36 +0200
Subject: percpu, x86: Avoid warnings of unused variables in per cpu

Avoid hundreds of warnings with a gcc 4.6 -Wall build.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/percpu.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 0797e748d280..cd28f9ad910d 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -77,6 +77,7 @@ do {							\
 	if (0) {					\
 		pto_T__ pto_tmp__;			\
 		pto_tmp__ = (val);			\
+		(void)pto_tmp__;			\
 	}						\
 	switch (sizeof(var)) {				\
 	case 1:						\
@@ -115,6 +116,7 @@ do {									\
 	if (0) {							\
 		pao_T__ pao_tmp__;					\
 		pao_tmp__ = (val);					\
+		(void)pao_tmp__;					\
 	}								\
 	switch (sizeof(var)) {						\
 	case 1:								\
-- 
cgit v1.2.3


From cf3bdc29fcbf2cb4cfa238591021d41ea8f8431f Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Thu, 10 Jun 2010 13:10:40 +0200
Subject: x86, setup: Set ax register in boot vga query

Catch missing conversion to the register structure "glove box" scheme.

Found by gcc 4.6's new warnings.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <20100610111040.F1781B1A2B@basil.firstfloor.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/boot/video-vga.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c
index ed7aeff786b2..45bc9402aa49 100644
--- a/arch/x86/boot/video-vga.c
+++ b/arch/x86/boot/video-vga.c
@@ -41,13 +41,12 @@ static __videocard video_vga;
 static u8 vga_set_basic_mode(void)
 {
 	struct biosregs ireg, oreg;
-	u16 ax;
 	u8 mode;
 
 	initregs(&ireg);
 
 	/* Query current mode */
-	ax = 0x0f00;
+	ireg.ax = 0x0f00;
 	intcall(0x10, &ireg, &oreg);
 	mode = oreg.al;
 
-- 
cgit v1.2.3


From 055c47272b8f5679d08ccc57efea3cb4aaeb5fc6 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <bp@alien8.de>
Date: Wed, 9 Jun 2010 11:04:16 +0300
Subject: um, hweight: Fix UML boot crash due to x86 optimized hweight

Apparently UML cannot stomach callee reg-saving trickery
introduced with d61931d89be506372d01a90d1755f6d0a9fafe2d
(x86: Add optimized popcnt variants) and oopses during boot:
http://marc.info/?l=linux-kernel&m=127522065202435&w=2

Redirect arch_hweight.h include from the x86 portion to the generic
arch_hweight.h which is a fallback to the software hweight routines.

LKML-Reference: <201005271944.09541.toralf.foerster@gmx.de>
Signed-off-by: Borislav Petkov <bp@alien8.de>
LKML-Reference: <4C0F4B00.4090307@panasas.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/um/include/asm/arch_hweight.h | 6 ++++++
 1 file changed, 6 insertions(+)
 create mode 100644 arch/um/include/asm/arch_hweight.h

diff --git a/arch/um/include/asm/arch_hweight.h b/arch/um/include/asm/arch_hweight.h
new file mode 100644
index 000000000000..c656cf443f4a
--- /dev/null
+++ b/arch/um/include/asm/arch_hweight.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_UM_HWEIGHT_H
+#define _ASM_UM_HWEIGHT_H
+
+#include <asm-generic/bitops/arch_hweight.h>
+
+#endif
-- 
cgit v1.2.3


From a8fb2608053547bc3152ea61a5ec7cdfce5d942c Mon Sep 17 00:00:00 2001
From: Steven Rostedt <srostedt@redhat.com>
Date: Thu, 10 Jun 2010 14:53:16 -0400
Subject: perf/tracing: Fix regression of perf losing kprobe events

With the addition of the code to shrink the kernel tracepoint
infrastructure, we lost kprobes being traced by perf. The reason
is that I tested if the "tp_event->class->perf_probe" existed before
enabling it. This prevents "ftrace only" events (like the function
trace events) from being enabled by perf.

Unfortunately, kprobe events do not use perf_probe. This causes
kprobes to be missed by perf. To fix this, we add the test to
see if "tp_event->class->reg" exists as well as perf_probe.

Normal trace events have only "perf_probe" but no "reg" function,
and kprobes and syscalls have the "reg" but no "perf_probe".
The ftrace unique events do not have either, so this is a valid
test. If a kprobe or syscall is not to be probed by perf, the
"reg" function is called anyway, and will return a failure and
prevent perf from probing it.

Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 kernel/trace/trace_event_perf.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/trace/trace_event_perf.c b/kernel/trace/trace_event_perf.c
index e6f65887842c..8a2b73f7c068 100644
--- a/kernel/trace/trace_event_perf.c
+++ b/kernel/trace/trace_event_perf.c
@@ -96,7 +96,9 @@ int perf_trace_init(struct perf_event *p_event)
 	mutex_lock(&event_mutex);
 	list_for_each_entry(tp_event, &ftrace_events, list) {
 		if (tp_event->event.type == event_id &&
-		    tp_event->class && tp_event->class->perf_probe &&
+		    tp_event->class &&
+		    (tp_event->class->perf_probe ||
+		     tp_event->class->reg) &&
 		    try_module_get(tp_event->mod)) {
 			ret = perf_trace_event_init(tp_event, p_event);
 			break;
-- 
cgit v1.2.3


From fbe618f216830f47b183858c3380d4767b1ad02f Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Fri, 11 Jun 2010 11:24:58 +0200
Subject: ALSA: hda - Don't check capture source mixer if no ADC is available

With multiple codec configurations, some codec might have no ADC, thus
it keeps spec->adc_nids = NULL.  This causes an Oops in alc_build_controls().

Reference: kernel bug #16156
	https://bugzilla.kernel.org/show_bug.cgi?id=16156

Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index fc767b6b4785..f6cd8ed3272f 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2619,16 +2619,18 @@ static int alc_build_controls(struct hda_codec *codec)
 	}
 
 	/* assign Capture Source enums to NID */
-	kctl = snd_hda_find_mixer_ctl(codec, "Capture Source");
-	if (!kctl)
-		kctl = snd_hda_find_mixer_ctl(codec, "Input Source");
-	for (i = 0; kctl && i < kctl->count; i++) {
-		hda_nid_t *nids = spec->capsrc_nids;
-		if (!nids)
-			nids = spec->adc_nids;
-		err = snd_hda_add_nid(codec, kctl, i, nids[i]);
-		if (err < 0)
-			return err;
+	if (spec->capsrc_nids || spec->adc_nids) {
+		kctl = snd_hda_find_mixer_ctl(codec, "Capture Source");
+		if (!kctl)
+			kctl = snd_hda_find_mixer_ctl(codec, "Input Source");
+		for (i = 0; kctl && i < kctl->count; i++) {
+			hda_nid_t *nids = spec->capsrc_nids;
+			if (!nids)
+				nids = spec->adc_nids;
+			err = snd_hda_add_nid(codec, kctl, i, nids[i]);
+			if (err < 0)
+				return err;
+		}
 	}
 	if (spec->cap_mixer) {
 		const char *kname = kctl ? kctl->id.name : NULL;
-- 
cgit v1.2.3


From d07140ba7fe1b41713627c6dc3f169a00019fb0e Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Fri, 11 Jun 2010 17:34:19 +0200
Subject: ALSA: usb-audio: add check for faulty clock in
 parse_audio_format_rates_v2()

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/format.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/sound/usb/format.c b/sound/usb/format.c
index 5367cd1e52d9..df5b29fed000 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -218,6 +218,12 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
 	int i, nr_rates, data_size, ret = 0;
 	int clock = snd_usb_clock_find_source(chip, chip->ctrl_intf, fp->clock);
 
+	if (clock < 0) {
+		snd_printk(KERN_ERR "%s(): unable to find clock source (clock %d)\n",
+				__func__, clock);
+		goto err;
+	}
+
 	/* get the number of sample rates first by only fetching 2 bytes */
 	ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
 			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
-- 
cgit v1.2.3


From 11bcbc443a17653c65bc20029172fae76f4bcca4 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Fri, 11 Jun 2010 17:34:20 +0200
Subject: ALSA: usb-audio: fix control messages for USB_RECIP_INTERFACE

Control messages directed to an interface must have the interface number
set in the lower 8 bits of wIndex. This wasn't done correctly for some
clock and mixer messages.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Reported-by: Alex Lee <alexlee188@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/clock.c  | 12 ++++++++----
 sound/usb/format.c |  6 ++++--
 sound/usb/helper.h |  4 ++++
 3 files changed, 16 insertions(+), 6 deletions(-)

diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index b7aadd614c70..b5855114667e 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -103,7 +103,8 @@ static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_i
 	ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0),
 			      UAC2_CS_CUR,
 			      USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
-			      UAC2_CX_CLOCK_SELECTOR << 8, selector_id << 8,
+			      UAC2_CX_CLOCK_SELECTOR << 8,
+			      snd_usb_ctrl_intf(chip) | (selector_id << 8),
 			      &buf, sizeof(buf), 1000);
 
 	if (ret < 0)
@@ -120,7 +121,8 @@ static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, int source_id)
 
 	err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
 			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
-			      UAC2_CS_CONTROL_CLOCK_VALID << 8, source_id << 8,
+			      UAC2_CS_CONTROL_CLOCK_VALID << 8,
+			      snd_usb_ctrl_intf(chip) | (source_id << 8),
 			      &data, sizeof(data), 1000);
 
 	if (err < 0) {
@@ -269,7 +271,8 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
 	data[3] = rate >> 24;
 	if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
 				   USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
-				   UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8,
+				   UAC2_CS_CONTROL_SAM_FREQ << 8,
+				   snd_usb_ctrl_intf(chip) | (clock << 8),
 				   data, sizeof(data), 1000)) < 0) {
 		snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n",
 			   dev->devnum, iface, fmt->altsetting, rate);
@@ -278,7 +281,8 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
 
 	if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
 				   USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
-				   UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8,
+				   UAC2_CS_CONTROL_SAM_FREQ << 8,
+				   snd_usb_ctrl_intf(chip) | (clock << 8),
 				   data, sizeof(data), 1000)) < 0) {
 		snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
 			   dev->devnum, iface, fmt->altsetting);
diff --git a/sound/usb/format.c b/sound/usb/format.c
index df5b29fed000..8eccf17a4ac6 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -227,7 +227,8 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
 	/* get the number of sample rates first by only fetching 2 bytes */
 	ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
 			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
-			      UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8,
+			      UAC2_CS_CONTROL_SAM_FREQ << 8,
+			      snd_usb_ctrl_intf(chip) | (clock << 8),
 			      tmp, sizeof(tmp), 1000);
 
 	if (ret < 0) {
@@ -247,7 +248,8 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
 	/* now get the full information */
 	ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
 			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
-			      UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8,
+			      UAC2_CS_CONTROL_SAM_FREQ << 8,
+			      snd_usb_ctrl_intf(chip) | (clock << 8),
 			      data, data_size, 1000);
 
 	if (ret < 0) {
diff --git a/sound/usb/helper.h b/sound/usb/helper.h
index a6b0e51b3a9a..09bd943c43bf 100644
--- a/sound/usb/helper.h
+++ b/sound/usb/helper.h
@@ -28,5 +28,9 @@ unsigned char snd_usb_parse_datainterval(struct snd_usb_audio *chip,
 #define snd_usb_get_speed(dev) ((dev)->speed)
 #endif
 
+static inline int snd_usb_ctrl_intf(struct snd_usb_audio *chip)
+{
+	return get_iface_desc(chip->ctrl_intf)->bInterfaceNumber;
+}
 
 #endif /* __USBAUDIO_HELPER_H */
-- 
cgit v1.2.3


From 67c103664a06fa590f2990c01773dfa1dffcefdc Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Fri, 11 Jun 2010 17:46:33 +0200
Subject: ALSA: usb-audio: parse UAC2 sample rate ranges correctly

A device may report its supported sample rates in ranges rather than in
discrete triplets. The code used to only parse the MIN field instead of
properly paying attention to the MAX and RES values.

Also, handle RES values of 1 correctly and announce a continous sample
rate range in this case.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Reported-by: Alex Lee <alexlee188@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/format.c | 92 +++++++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 74 insertions(+), 18 deletions(-)

diff --git a/sound/usb/format.c b/sound/usb/format.c
index 8eccf17a4ac6..30364aba79cc 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -205,6 +205,60 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof
 	return 0;
 }
 
+/*
+ * Helper function to walk the array of sample rate triplets reported by
+ * the device. The problem is that we need to parse whole array first to
+ * get to know how many sample rates we have to expect.
+ * Then fp->rate_table can be allocated and filled.
+ */
+static int parse_uac2_sample_rate_range(struct audioformat *fp, int nr_triplets,
+					const unsigned char *data)
+{
+	int i, nr_rates = 0;
+
+	fp->rates = fp->rate_min = fp->rate_max = 0;
+
+	for (i = 0; i < nr_triplets; i++) {
+		int min = combine_quad(&data[2 + 12 * i]);
+		int max = combine_quad(&data[6 + 12 * i]);
+		int res = combine_quad(&data[10 + 12 * i]);
+		int rate;
+
+		if ((max < 0) || (min < 0) || (res < 0) || (max < min))
+			continue;
+
+		/*
+		 * for ranges with res == 1, we announce a continuous sample
+		 * rate range, and this function should return 0 for no further
+		 * parsing.
+		 */
+		if (res == 1) {
+			fp->rate_min = min;
+			fp->rate_max = max;
+			fp->rates = SNDRV_PCM_RATE_CONTINUOUS;
+			return 0;
+		}
+
+		for (rate = min; rate <= max; rate += res) {
+			if (fp->rate_table)
+				fp->rate_table[nr_rates] = rate;
+			if (!fp->rate_min || rate < fp->rate_min)
+				fp->rate_min = rate;
+			if (!fp->rate_max || rate > fp->rate_max)
+				fp->rate_max = rate;
+			fp->rates |= snd_pcm_rate_to_rate_bit(rate);
+
+			nr_rates++;
+
+			/* avoid endless loop */
+			if (res == 0)
+				break;
+		}
+	}
+
+	return nr_rates;
+}
+
 /*
  * parse the format descriptor and stores the possible sample rates
  * on the audioformat table (audio class v2).
@@ -215,7 +269,7 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
 {
 	struct usb_device *dev = chip->dev;
 	unsigned char tmp[2], *data;
-	int i, nr_rates, data_size, ret = 0;
+	int nr_triplets, data_size, ret = 0;
 	int clock = snd_usb_clock_find_source(chip, chip->ctrl_intf, fp->clock);
 
 	if (clock < 0) {
@@ -237,8 +291,8 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
 		goto err;
 	}
 
-	nr_rates = (tmp[1] << 8) | tmp[0];
-	data_size = 2 + 12 * nr_rates;
+	nr_triplets = (tmp[1] << 8) | tmp[0];
+	data_size = 2 + 12 * nr_triplets;
 	data = kzalloc(data_size, GFP_KERNEL);
 	if (!data) {
 		ret = -ENOMEM;
@@ -259,26 +313,28 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
 		goto err_free;
 	}
 
-	fp->rate_table = kmalloc(sizeof(int) * nr_rates, GFP_KERNEL);
+	/* Call the triplet parser, and make sure fp->rate_table is NULL.
+	 * We just use the return value to know how many sample rates we
+	 * will have to deal with. */
+	kfree(fp->rate_table);
+	fp->rate_table = NULL;
+	fp->nr_rates = parse_uac2_sample_rate_range(fp, nr_triplets, data);
+
+	if (fp->nr_rates == 0) {
+		/* SNDRV_PCM_RATE_CONTINUOUS */
+		ret = 0;
+		goto err_free;
+	}
+
+	fp->rate_table = kmalloc(sizeof(int) * fp->nr_rates, GFP_KERNEL);
 	if (!fp->rate_table) {
 		ret = -ENOMEM;
 		goto err_free;
 	}
 
-	fp->nr_rates = 0;
-	fp->rate_min = fp->rate_max = 0;
-
-	for (i = 0; i < nr_rates; i++) {
-		int rate = combine_quad(&data[2 + 12 * i]);
-
-		fp->rate_table[fp->nr_rates] = rate;
-		if (!fp->rate_min || rate < fp->rate_min)
-			fp->rate_min = rate;
-		if (!fp->rate_max || rate > fp->rate_max)
-			fp->rate_max = rate;
-		fp->rates |= snd_pcm_rate_to_rate_bit(rate);
-		fp->nr_rates++;
-	}
+	/* Call the triplet parser again, but this time, fp->rate_table is
+	 * allocated, so the rates will be stored */
+	parse_uac2_sample_rate_range(fp, nr_triplets, data);
 
 err_free:
 	kfree(data);
-- 
cgit v1.2.3


From e8bdb6bbab60a8731f21823c86391f176d052348 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Fri, 11 Jun 2010 17:34:22 +0200
Subject: ALSA: usb-audio: fix UAC2 control value queries

For RANGE requests, we should only query as much bytes as we're in fact
interested in.

For CUR requests, we shouldn't confuse the firmware with an overlong
request but just ask for 2 bytes.

This might need fixing in the future as it's not entirely clear when to
dispatch 1-byte, 2-byte and 4-byte request blocks. For now, we assume
everything is coded in 16bit - this works for all firmware
implementations I've seen.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Reported-by: Alex Lee <alexlee188@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/mixer.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index a060d005e209..6939d0f517d9 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -297,20 +297,27 @@ static int get_ctl_value_v1(struct usb_mixer_elem_info *cval, int request, int v
 
 static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int validx, int *value_ret)
 {
-	unsigned char buf[14]; /* enough space for one range of 4 bytes */
+	unsigned char buf[2 + 3*sizeof(__u16)]; /* enough space for one range */
 	unsigned char *val;
-	int ret;
+	int ret, size;
 	__u8 bRequest;
 
-	bRequest = (request == UAC_GET_CUR) ?
-		UAC2_CS_CUR : UAC2_CS_RANGE;
+	if (request == UAC_GET_CUR) {
+		bRequest = UAC2_CS_CUR;
+		size = sizeof(__u16);
+	} else {
+		bRequest = UAC2_CS_RANGE;
+		size = sizeof(buf);
+	}
+
+	memset(buf, 0, sizeof(buf));
 
 	ret = snd_usb_ctl_msg(cval->mixer->chip->dev,
 			      usb_rcvctrlpipe(cval->mixer->chip->dev, 0),
 			      bRequest,
 			      USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
 			      validx, cval->mixer->ctrlif | (cval->id << 8),
-			      buf, sizeof(buf), 1000);
+			      buf, size, 1000);
 
 	if (ret < 0) {
 		snd_printk(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
@@ -318,6 +325,8 @@ static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int v
 		return ret;
 	}
 
+	/* FIXME: how should we handle multiple triplets here? */
+
 	switch (request) {
 	case UAC_GET_CUR:
 		val = buf;
-- 
cgit v1.2.3


From 6a4f3b523779b67e7d560ed42652f8a59f2f9782 Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venki@google.com>
Date: Thu, 10 Jun 2010 17:45:01 -0700
Subject: x86, pat: Proper init of memtype subtree_max_end

subtree_max_end that was recently added to struct memtype was not getting
properly initialized resulting in

WARNING: kmemcheck: Caught 64-bit read from uninitialized memory
in memtype_rb_augment_cb()
reported here
https://bugzilla.kernel.org/show_bug.cgi?id=16092

This change fixes the problem.

Reported-by: Christian Casteyde <casteyde.christian@free.fr>
Tested-by: Christian Casteyde <casteyde.christian@free.fr>
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
LKML-Reference: <1276217101-11515-1-git-send-email-venki@google.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
---
 arch/x86/mm/pat.c        | 2 +-
 arch/x86/mm/pat_rbtree.c | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index acc15b23b743..64121a18b8cb 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -302,7 +302,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		return -EINVAL;
 	}
 
-	new  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
+	new  = kzalloc(sizeof(struct memtype), GFP_KERNEL);
 	if (!new)
 		return -ENOMEM;
 
diff --git a/arch/x86/mm/pat_rbtree.c b/arch/x86/mm/pat_rbtree.c
index f537087bb740..f20eeec85a86 100644
--- a/arch/x86/mm/pat_rbtree.c
+++ b/arch/x86/mm/pat_rbtree.c
@@ -226,6 +226,7 @@ int rbt_memtype_check_insert(struct memtype *new, unsigned long *ret_type)
 		if (ret_type)
 			new->type = *ret_type;
 
+		new->subtree_max_end = new->end;
 		memtype_rb_insert(&memtype_rbroot, new);
 	}
 	return err;
-- 
cgit v1.2.3


From 1c938663d58b5b2965976a6f54cc51b5d6f691aa Mon Sep 17 00:00:00 2001
From: Krzysztof Halasa <khc@pm.waw.pl>
Date: Fri, 11 Jun 2010 01:08:20 +0200
Subject: kbuild: Fix modpost segfault
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Alan <alan@clueserver.org> writes:

> program: /home/alan/GitTrees/linux-2.6-mid-ref/scripts/mod/modpost -o
> Module.symvers -S vmlinux.o
>
> Program received signal SIGSEGV, Segmentation fault.

It just hit me.
It's the offset calculation in reloc_location() which overflows:
        return (void *)elf->hdr + sechdrs[section].sh_offset +
               (r->r_offset - sechdrs[section].sh_addr);

E.g. for the first rodata r entry:
r->r_offset < sechdrs[section].sh_addr
and the expression in the parenthesis produces 0xFFFFFFE0 or something
equally wise.

Reported-by: Alan <alan@clueserver.org>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Tested-by: Alan <alan@clueserver.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
---
 scripts/mod/modpost.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 3318692e4e76..f8779006986d 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1342,7 +1342,7 @@ static unsigned int *reloc_location(struct elf_info *elf,
 	int section = sechdr->sh_info;
 
 	return (void *)elf->hdr + sechdrs[section].sh_offset +
-		(r->r_offset - sechdrs[section].sh_addr);
+		r->r_offset - sechdrs[section].sh_addr;
 }
 
 static int addend_386_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)
-- 
cgit v1.2.3


From a997ab332832519c2e292db13f509e4360495a5a Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Sat, 12 Jun 2010 00:05:19 +0200
Subject: ACPI / ACPICA: Do not attempt to disable GPE when installing handler

Commit 0f849d2cc6863c7874889ea60a871fb71399dd3f (ACPICA: Minimize
the differences between linux GPE code and ACPICA code base)
introduced a change attempting to disable a GPE before installing
a handler for it in acpi_install_gpe_handler() which was incorrect.
First, the GPE disabled by it is never enabled again (except during
resume) which leads to battery insert/remove events not being
reported on the Maxim Levitsky's machine.  Second, the disabled
GPE is still reported as enabled by the sysfs interface that only
checks its enable register's enable_for_run mask.

Revert this change for now, because it causes more damage to happen
than the bug it was supposed to fix.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpica/evxface.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c
index cc825023012a..4a531cdf7942 100644
--- a/drivers/acpi/acpica/evxface.c
+++ b/drivers/acpi/acpica/evxface.c
@@ -719,13 +719,6 @@ acpi_install_gpe_handler(acpi_handle gpe_device,
 	handler->context = context;
 	handler->method_node = gpe_event_info->dispatch.method_node;
 
-	/* Disable the GPE before installing the handler */
-
-	status = acpi_ev_disable_gpe(gpe_event_info);
-	if (ACPI_FAILURE (status)) {
-		goto unlock_and_exit;
-	}
-
 	/* Install the handler */
 
 	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
-- 
cgit v1.2.3


From e4e9a735991c80fb0fc1bd4a13a93681c3c17ce0 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Tue, 8 Jun 2010 10:48:26 +0200
Subject: ACPI / ACPICA: Use helper function for computing GPE masks

In quite a few places ACPICA needs to compute a GPE enable mask with
only one bit, corresponding to a given GPE, set.  Currently, that
computation is always open coded which leads to unnecessary code
duplication.  Fix this by introducing a helper function for computing
one-bit GPE enable masks and using it where appropriate.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpica/achware.h |  3 +++
 drivers/acpi/acpica/evgpe.c   |  7 +++---
 drivers/acpi/acpica/hwgpe.c   | 52 +++++++++++++++++++++++++++++++++----------
 3 files changed, 46 insertions(+), 16 deletions(-)

diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h
index 5900f135dc6d..c46277d179f0 100644
--- a/drivers/acpi/acpica/achware.h
+++ b/drivers/acpi/acpica/achware.h
@@ -90,6 +90,9 @@ acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width);
 /*
  * hwgpe - GPE support
  */
+u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
+			     struct acpi_gpe_register_info *gpe_register_info);
+
 acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info);
 
 acpi_status
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index deb26f4c6623..57eeb3bde41e 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -69,7 +69,7 @@ acpi_status
 acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info)
 {
 	struct acpi_gpe_register_info *gpe_register_info;
-	u8 register_bit;
+	u32 register_bit;
 
 	ACPI_FUNCTION_TRACE(ev_update_gpe_enable_masks);
 
@@ -78,9 +78,8 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info)
 		return_ACPI_STATUS(AE_NOT_EXIST);
 	}
 
-	register_bit = (u8)
-	    (1 <<
-	     (gpe_event_info->gpe_number - gpe_register_info->base_gpe_number));
+	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+						gpe_register_info);
 
 	/* Clear the wake/run bits up front */
 
diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index bd72319a38f0..d989b8e786cc 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -55,6 +55,27 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 				struct acpi_gpe_block_info *gpe_block,
 				void *context);
 
+/******************************************************************************
+ *
+ * FUNCTION:	acpi_hw_gpe_register_bit
+ *
+ * PARAMETERS:	gpe_event_info	    - Info block for the GPE
+ *		gpe_register_info   - Info block for the GPE register
+ *
+ * RETURN:	Status
+ *
+ * DESCRIPTION:	Compute GPE enable mask with one bit corresponding to the given
+ *		GPE set.
+ *
+ ******************************************************************************/
+
+u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
+			     struct acpi_gpe_register_info *gpe_register_info)
+{
+	return (u32)1 << (gpe_event_info->gpe_number -
+				gpe_register_info->base_gpe_number);
+}
+
 /******************************************************************************
  *
  * FUNCTION:	acpi_hw_low_disable_gpe
@@ -72,6 +93,7 @@ acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
 	struct acpi_gpe_register_info *gpe_register_info;
 	acpi_status status;
 	u32 enable_mask;
+	u32 register_bit;
 
 	/* Get the info block for the entire GPE register */
 
@@ -89,9 +111,9 @@ acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
 
 	/* Clear just the bit that corresponds to this GPE */
 
-	ACPI_CLEAR_BIT(enable_mask, ((u32)1 <<
-				     (gpe_event_info->gpe_number -
-				      gpe_register_info->base_gpe_number)));
+	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+						gpe_register_info);
+	ACPI_CLEAR_BIT(enable_mask, register_bit);
 
 	/* Write the updated enable mask */
 
@@ -150,21 +172,28 @@ acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info * gpe_event_info)
 
 acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info)
 {
+	struct acpi_gpe_register_info *gpe_register_info;
 	acpi_status status;
-	u8 register_bit;
+	u32 register_bit;
 
 	ACPI_FUNCTION_ENTRY();
 
-	register_bit = (u8)(1 <<
-			    (gpe_event_info->gpe_number -
-			     gpe_event_info->register_info->base_gpe_number));
+	/* Get the info block for the entire GPE register */
+
+	gpe_register_info = gpe_event_info->register_info;
+	if (!gpe_register_info) {
+		return (AE_NOT_EXIST);
+	}
+
+	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+						gpe_register_info);
 
 	/*
 	 * Write a one to the appropriate bit in the status register to
 	 * clear this GPE.
 	 */
 	status = acpi_hw_write(register_bit,
-			       &gpe_event_info->register_info->status_address);
+			       &gpe_register_info->status_address);
 
 	return (status);
 }
@@ -187,7 +216,7 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info,
 		       acpi_event_status * event_status)
 {
 	u32 in_byte;
-	u8 register_bit;
+	u32 register_bit;
 	struct acpi_gpe_register_info *gpe_register_info;
 	acpi_status status;
 	acpi_event_status local_event_status = 0;
@@ -204,9 +233,8 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info,
 
 	/* Get the register bitmask for this GPE */
 
-	register_bit = (u8)(1 <<
-			    (gpe_event_info->gpe_number -
-			     gpe_event_info->register_info->base_gpe_number));
+	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+						gpe_register_info);
 
 	/* GPE currently enabled? (enabled for runtime?) */
 
-- 
cgit v1.2.3


From ed0e3ace576d297a5c7015401db1060bbf677b94 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Tue, 1 Jun 2010 16:21:01 -0400
Subject: cifs: don't attempt busy-file rename unless it's in same directory

Busy-file renames don't actually work across directories, so we need
to limit this code to renames within the same dir.

This fixes the bug detailed here:

    https://bugzilla.redhat.com/show_bug.cgi?id=591938

Signed-off-by: Jeff Layton <jlayton@redhat.com>
CC: Stable <stable@kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/inode.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 62b324f26a56..6f0683c68952 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1401,6 +1401,10 @@ cifs_do_rename(int xid, struct dentry *from_dentry, const char *fromPath,
 	if (rc == 0 || rc != -ETXTBSY)
 		return rc;
 
+	/* open-file renames don't work across directories */
+	if (to_dentry->d_parent != from_dentry->d_parent)
+		return rc;
+
 	/* open the file to be renamed -- we need DELETE perms */
 	rc = CIFSSMBOpen(xid, pTcon, fromPath, FILE_OPEN, DELETE,
 			 CREATE_NOT_DIR, &srcfid, &oplock, NULL,
-- 
cgit v1.2.3


From 12420ac341533f3715b3deb788637568f22b78ff Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Tue, 1 Jun 2010 14:47:40 -0400
Subject: cifs: implement drop_inode superblock op

The standard behavior for drop_inode is to delete the inode when the
last reference to it is put and the nlink count goes to 0. This helps
keep inodes that are still considered "not deleted" in cache as long as
possible even when there aren't dentries attached to them.

When server inode numbers are disabled, it's not possible for cifs_iget
to ever match an existing inode (since inode numbers are generated via
iunique). In this situation, cifs can keep a lot of inodes in cache that
will never be used again.

Implement a drop_inode routine that deletes the inode if server inode
numbers are disabled on the mount. This helps keep the cifs inode
caches down to a more manageable size when server inode numbers are
disabled.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifsfs.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 78c02eb4cb1f..484e52bb40bb 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -473,14 +473,24 @@ static int cifs_remount(struct super_block *sb, int *flags, char *data)
 	return 0;
 }
 
+void cifs_drop_inode(struct inode *inode)
+{
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
+		return generic_drop_inode(inode);
+
+	return generic_delete_inode(inode);
+}
+
 static const struct super_operations cifs_super_ops = {
 	.put_super = cifs_put_super,
 	.statfs = cifs_statfs,
 	.alloc_inode = cifs_alloc_inode,
 	.destroy_inode = cifs_destroy_inode,
-/*	.drop_inode	    = generic_delete_inode,
-	.delete_inode	= cifs_delete_inode,  */  /* Do not need above two
-	functions unless later we add lazy close of inodes or unless the
+	.drop_inode	= cifs_drop_inode,
+/*	.delete_inode	= cifs_delete_inode,  */  /* Do not need above
+	function unless later we add lazy close of inodes or unless the
 	kernel forgets to call us with the same number of releases (closes)
 	as opens */
 	.show_options = cifs_show_options,
-- 
cgit v1.2.3


From fd247447c1d94a79d5cfc647430784306b3a8323 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Tue, 8 Jun 2010 10:49:08 +0200
Subject: ACPI / ACPICA: Fix low-level GPE manipulation code

ACPICA uses acpi_ev_enable_gpe() for enabling GPEs at the low level,
which is incorrect, because this function only enables the GPE if the
corresponding bit in its enable register's enable_for_run mask is set.
This causes acpi_set_gpe() to work incorrectly if used for enabling
GPEs that were not previously enabled with acpi_enable_gpe().  As a
result, among other things, wakeup-only GPEs are never enabled by
acpi_enable_wakeup_device(), so the devices that use them are unable
to wake up the system.

To fix this issue remove acpi_ev_enable_gpe() and its counterpart
acpi_ev_disable_gpe() and replace acpi_hw_low_disable_gpe() with
acpi_hw_low_set_gpe() that will be used instead to manipulate GPE
enable bits at the low level.  Make the users of acpi_ev_enable_gpe()
and acpi_ev_disable_gpe() call acpi_hw_low_set_gpe() instead and
make sure that GPE enable masks are only updated by acpi_enable_gpe()
and acpi_disable_gpe() when GPE reference counters change from 0
to 1 and from 1 to 0, respectively.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpica/acevents.h |   4 --
 drivers/acpi/acpica/achware.h  |   3 +-
 drivers/acpi/acpica/evgpe.c    | 108 +----------------------------------------
 drivers/acpi/acpica/evxfevnt.c |  59 +++++++++++++++++++---
 drivers/acpi/acpica/hwgpe.c    |  26 ++++++++--
 include/acpi/actypes.h         |   2 +-
 6 files changed, 79 insertions(+), 123 deletions(-)

diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index 5e094a28cf54..138bbb521930 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -78,10 +78,6 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node *node,
 acpi_status
 acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info);
 
-acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info);
-
-acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info);
-
 struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
 						       u32 gpe_number);
 
diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h
index c46277d179f0..32391588e163 100644
--- a/drivers/acpi/acpica/achware.h
+++ b/drivers/acpi/acpica/achware.h
@@ -93,7 +93,8 @@ acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width);
 u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
 			     struct acpi_gpe_register_info *gpe_register_info);
 
-acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info);
+acpi_status
+acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action);
 
 acpi_status
 acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info *gpe_event_info);
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index 57eeb3bde41e..66cd03835d6e 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -99,106 +99,6 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info)
 	return_ACPI_STATUS(AE_OK);
 }
 
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ev_enable_gpe
- *
- * PARAMETERS:  gpe_event_info          - GPE to enable
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Hardware-enable a GPE. Always enables the GPE, regardless
- *              of type or number of references.
- *
- * Note: The GPE lock should be already acquired when this function is called.
- *
- ******************************************************************************/
-
-acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
-{
-	acpi_status status;
-
-
-	ACPI_FUNCTION_TRACE(ev_enable_gpe);
-
-
-	/*
-	 * We will only allow a GPE to be enabled if it has either an
-	 * associated method (_Lxx/_Exx) or a handler. Otherwise, the
-	 * GPE will be immediately disabled by acpi_ev_gpe_dispatch the
-	 * first time it fires.
-	 */
-	if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) {
-		return_ACPI_STATUS(AE_NO_HANDLER);
-	}
-
-	/* Ensure the HW enable masks are current */
-
-	status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Clear the GPE (of stale events) */
-
-	status = acpi_hw_clear_gpe(gpe_event_info);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Enable the requested GPE */
-
-	status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ev_disable_gpe
- *
- * PARAMETERS:  gpe_event_info          - GPE to disable
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Hardware-disable a GPE. Always disables the requested GPE,
- *              regardless of the type or number of references.
- *
- * Note: The GPE lock should be already acquired when this function is called.
- *
- ******************************************************************************/
-
-acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
-{
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ev_disable_gpe);
-
-
-	/*
-	 * Note: Always disable the GPE, even if we think that that it is already
-	 * disabled. It is possible that the AML or some other code has enabled
-	 * the GPE behind our back.
-	 */
-
-	/* Ensure the HW enable masks are current */
-
-	status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/*
-	 * Always H/W disable this GPE, even if we don't know the GPE type.
-	 * Simply clear the enable bit for this particular GPE, but do not
-	 * write out the current GPE enable mask since this may inadvertently
-	 * enable GPEs too early. An example is a rogue GPE that has arrived
-	 * during ACPICA initialization - possibly because AML or other code
-	 * has enabled the GPE.
-	 */
-	status = acpi_hw_low_disable_gpe(gpe_event_info);
-	return_ACPI_STATUS(status);
-}
-
 
 /*******************************************************************************
  *
@@ -450,10 +350,6 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
 		return_VOID;
 	}
 
-	/* Update the GPE register masks for return to enabled state */
-
-	(void)acpi_ev_update_gpe_enable_masks(gpe_event_info);
-
 	/*
 	 * Take a snapshot of the GPE info for this level - we copy the info to
 	 * prevent a race condition with remove_handler/remove_block.
@@ -606,7 +502,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 		 * Disable the GPE, so it doesn't keep firing before the method has a
 		 * chance to run (it runs asynchronously with interrupts enabled).
 		 */
-		status = acpi_ev_disable_gpe(gpe_event_info);
+		status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
 		if (ACPI_FAILURE(status)) {
 			ACPI_EXCEPTION((AE_INFO, status,
 					"Unable to disable GPE[0x%2X]",
@@ -643,7 +539,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 		 * Disable the GPE. The GPE will remain disabled a handler
 		 * is installed or ACPICA is restarted.
 		 */
-		status = acpi_ev_disable_gpe(gpe_event_info);
+		status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
 		if (ACPI_FAILURE(status)) {
 			ACPI_EXCEPTION((AE_INFO, status,
 					"Unable to disable GPE[0x%2X]",
diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index 7c7bbb4d402c..e3d9f5c8e53d 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -199,6 +199,44 @@ acpi_status acpi_enable_event(u32 event, u32 flags)
 
 ACPI_EXPORT_SYMBOL(acpi_enable_event)
 
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_clear_and_enable_gpe
+ *
+ * PARAMETERS:  gpe_event_info  - GPE to enable
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Clear the given GPE from stale events and enable it.
+ *
+ ******************************************************************************/
+static acpi_status
+acpi_clear_and_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+{
+	acpi_status status;
+
+	/*
+	 * We will only allow a GPE to be enabled if it has either an
+	 * associated method (_Lxx/_Exx) or a handler. Otherwise, the
+	 * GPE will be immediately disabled by acpi_ev_gpe_dispatch the
+	 * first time it fires.
+	 */
+	if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) {
+		return_ACPI_STATUS(AE_NO_HANDLER);
+	}
+
+	/* Clear the GPE (of stale events) */
+	status = acpi_hw_clear_gpe(gpe_event_info);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Enable the requested GPE */
+	status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
+
+	return_ACPI_STATUS(status);
+}
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_set_gpe
@@ -240,11 +278,11 @@ acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action)
 
 	switch (action) {
 	case ACPI_GPE_ENABLE:
-		status = acpi_ev_enable_gpe(gpe_event_info);
+		status = acpi_clear_and_enable_gpe(gpe_event_info);
 		break;
 
 	case ACPI_GPE_DISABLE:
-		status = acpi_ev_disable_gpe(gpe_event_info);
+		status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
 		break;
 
 	default:
@@ -307,7 +345,11 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type)
 
 		gpe_event_info->runtime_count++;
 		if (gpe_event_info->runtime_count == 1) {
-			status = acpi_ev_enable_gpe(gpe_event_info);
+			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
+			if (ACPI_SUCCESS(status)) {
+				status = acpi_clear_and_enable_gpe(gpe_event_info);
+			}
+
 			if (ACPI_FAILURE(status)) {
 				gpe_event_info->runtime_count--;
 				goto unlock_and_exit;
@@ -334,7 +376,7 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type)
 		 */
 		gpe_event_info->wakeup_count++;
 		if (gpe_event_info->wakeup_count == 1) {
-			(void)acpi_ev_update_gpe_enable_masks(gpe_event_info);
+			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
 		}
 	}
 
@@ -394,7 +436,12 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type
 
 		gpe_event_info->runtime_count--;
 		if (!gpe_event_info->runtime_count) {
-			status = acpi_ev_disable_gpe(gpe_event_info);
+			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
+			if (ACPI_SUCCESS(status)) {
+				status = acpi_hw_low_set_gpe(gpe_event_info,
+							     ACPI_GPE_DISABLE);
+			}
+
 			if (ACPI_FAILURE(status)) {
 				gpe_event_info->runtime_count++;
 				goto unlock_and_exit;
@@ -415,7 +462,7 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type
 
 		gpe_event_info->wakeup_count--;
 		if (!gpe_event_info->wakeup_count) {
-			(void)acpi_ev_update_gpe_enable_masks(gpe_event_info);
+			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
 		}
 	}
 
diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index d989b8e786cc..40388e23e103 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -78,23 +78,27 @@ u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
 
 /******************************************************************************
  *
- * FUNCTION:	acpi_hw_low_disable_gpe
+ * FUNCTION:	acpi_hw_low_set_gpe
  *
  * PARAMETERS:	gpe_event_info	    - Info block for the GPE to be disabled
+ *		action		    - Enable or disable
  *
  * RETURN:	Status
  *
- * DESCRIPTION: Disable a single GPE in the enable register.
+ * DESCRIPTION: Enable or disable a single GPE in its enable register.
  *
  ******************************************************************************/
 
-acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+acpi_status
+acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action)
 {
 	struct acpi_gpe_register_info *gpe_register_info;
 	acpi_status status;
 	u32 enable_mask;
 	u32 register_bit;
 
+	ACPI_FUNCTION_ENTRY();
+
 	/* Get the info block for the entire GPE register */
 
 	gpe_register_info = gpe_event_info->register_info;
@@ -109,11 +113,23 @@ acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
 		return (status);
 	}
 
-	/* Clear just the bit that corresponds to this GPE */
+	/* Set ot clear just the bit that corresponds to this GPE */
 
 	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
 						gpe_register_info);
-	ACPI_CLEAR_BIT(enable_mask, register_bit);
+	switch (action) {
+	case ACPI_GPE_ENABLE:
+		ACPI_SET_BIT(enable_mask, register_bit);
+		break;
+
+	case ACPI_GPE_DISABLE:
+		ACPI_CLEAR_BIT(enable_mask, register_bit);
+		break;
+
+	default:
+		ACPI_ERROR((AE_INFO, "Invalid action\n"));
+		return (AE_BAD_PARAMETER);
+	}
 
 	/* Write the updated enable mask */
 
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index de5e99a99530..6881f5b7b7be 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -663,7 +663,7 @@ typedef u32 acpi_event_status;
 #define ACPI_GPE_MAX                    0xFF
 #define ACPI_NUM_GPE                    256
 
-/* Actions for acpi_set_gpe */
+/* Actions for acpi_set_gpe and acpi_hw_low_set_gpe */
 
 #define ACPI_GPE_ENABLE                 0
 #define ACPI_GPE_DISABLE                1
-- 
cgit v1.2.3


From c9a8bbb7704cbf515c0fc68970abbe4e91d68521 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Tue, 8 Jun 2010 10:49:45 +0200
Subject: ACPI / ACPICA: Avoid writing full enable masks to GPE registers

ACPICA uses acpi_hw_write_gpe_enable_reg() to re-enable a GPE after
an event signaled by it has been handled.  However, this function
writes the entire GPE enable mask to the GPE's enable register which
may not be correct.  Namely, if one of the other GPEs in the same
register was previously enabled by acpi_enable_gpe() and subsequently
disabled using acpi_set_gpe(), acpi_hw_write_gpe_enable_reg() will
re-enable it along with the target GPE.

To fix this issue rework acpi_hw_write_gpe_enable_reg() so that it
calls acpi_hw_low_set_gpe() with a special action value,
ACPI_GPE_COND_ENABLE, that will make it only enable the GPE if the
corresponding bit in its register's enable_for_run mask is set.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpica/hwgpe.c | 18 +++++-------------
 include/acpi/actypes.h      |  1 +
 2 files changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index 40388e23e103..3450309c2786 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -118,6 +118,10 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action)
 	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
 						gpe_register_info);
 	switch (action) {
+	case ACPI_GPE_COND_ENABLE:
+		if (!(register_bit & gpe_register_info->enable_for_run))
+			return (AE_BAD_PARAMETER);
+
 	case ACPI_GPE_ENABLE:
 		ACPI_SET_BIT(enable_mask, register_bit);
 		break;
@@ -154,23 +158,11 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action)
 acpi_status
 acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info * gpe_event_info)
 {
-	struct acpi_gpe_register_info *gpe_register_info;
 	acpi_status status;
 
 	ACPI_FUNCTION_ENTRY();
 
-	/* Get the info block for the entire GPE register */
-
-	gpe_register_info = gpe_event_info->register_info;
-	if (!gpe_register_info) {
-		return (AE_NOT_EXIST);
-	}
-
-	/* Write the entire GPE (runtime) enable register */
-
-	status = acpi_hw_write(gpe_register_info->enable_for_run,
-			       &gpe_register_info->enable_address);
-
+	status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_COND_ENABLE);
 	return (status);
 }
 
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 6881f5b7b7be..15a4c68fad3b 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -667,6 +667,7 @@ typedef u32 acpi_event_status;
 
 #define ACPI_GPE_ENABLE                 0
 #define ACPI_GPE_DISABLE                1
+#define ACPI_GPE_COND_ENABLE            2
 
 /* gpe_types for acpi_enable_gpe and acpi_disable_gpe */
 
-- 
cgit v1.2.3


From ce43ace02320a3fb9614ddb27edc3a8700d68b26 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Tue, 8 Jun 2010 10:50:20 +0200
Subject: ACPI / ACPICA: Fix GPE initialization

While developing the GPE reference counting code we overlooked the
fact that acpi_ev_update_gpes() could have enabled GPEs before
acpi_ev_initialize_gpe_block() was called.  As a result, some GPEs
are enabled twice during the initialization.

To fix this issue avoid calling acpi_enable_gpe() from
acpi_ev_initialize_gpe_block() for the GPEs that have nonzero
runtime reference counters.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpica/evgpeblk.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index 85ded1f2540d..79048de0aded 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -1024,6 +1024,19 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
 
 			gpe_index = (i * ACPI_GPE_REGISTER_WIDTH) + j;
 			gpe_event_info = &gpe_block->event_info[gpe_index];
+			gpe_number = gpe_index + gpe_block->block_base_number;
+
+			/*
+			 * If the GPE has already been enabled for runtime
+			 * signaling, make sure it remains enabled, but do not
+			 * increment its reference counter.
+			 */
+			if (gpe_event_info->runtime_count) {
+				acpi_set_gpe(gpe_device, gpe_number,
+						ACPI_GPE_ENABLE);
+				gpe_enabled_count++;
+				continue;
+			}
 
 			if (gpe_event_info->flags & ACPI_GPE_CAN_WAKE) {
 				wake_gpe_count++;
@@ -1040,7 +1053,6 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
 
 			/* Enable this GPE */
 
-			gpe_number = gpe_index + gpe_block->block_base_number;
 			status = acpi_enable_gpe(gpe_device, gpe_number,
 						 ACPI_GPE_TYPE_RUNTIME);
 			if (ACPI_FAILURE(status)) {
-- 
cgit v1.2.3


From 9d3c752de65dbfa6e522f1d666deb0ac152ef367 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Tue, 8 Jun 2010 10:50:53 +0200
Subject: ACPI / ACPICA: Fix sysfs GPE interface

The sysfs interface allowing user space to disable/enable GPEs
doesn't work correctly, because a GPE disabled this way will be
re-enabled shortly by acpi_ev_asynch_enable_gpe() if it was
previosuly enabled by acpi_enable_gpe() (in which case the
corresponding bit in its enable register's enable_for_run mask is
set).

To address this issue make the sysfs GPE interface use
acpi_enable_gpe() and acpi_disable_gpe() instead of acpi_set_gpe()
so that GPE reference counters are modified by it along with the
values of GPE enable registers.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/system.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index e35525b39f6b..904e8fce2e74 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -388,10 +388,12 @@ static ssize_t counter_set(struct kobject *kobj,
 	if (index < num_gpes) {
 		if (!strcmp(buf, "disable\n") &&
 				(status & ACPI_EVENT_FLAG_ENABLED))
-			result = acpi_set_gpe(handle, index, ACPI_GPE_DISABLE);
+			result = acpi_disable_gpe(handle, index,
+						ACPI_GPE_TYPE_RUNTIME);
 		else if (!strcmp(buf, "enable\n") &&
 				!(status & ACPI_EVENT_FLAG_ENABLED))
-			result = acpi_set_gpe(handle, index, ACPI_GPE_ENABLE);
+			result = acpi_enable_gpe(handle, index,
+						ACPI_GPE_TYPE_RUNTIME);
 		else if (!strcmp(buf, "clear\n") &&
 				(status & ACPI_EVENT_FLAG_SET))
 			result = acpi_clear_gpe(handle, index);
-- 
cgit v1.2.3


From d70326689b70b35527765bd3decbb1229459e928 Mon Sep 17 00:00:00 2001
From: Bob Moore <robert.moore@intel.com>
Date: Wed, 26 May 2010 11:06:12 +0800
Subject: ACPICA: Fix namestring associated with AE_NO_HANDLER exception

Was incorrectly AE_WAKE_ONLY_GPE.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 include/acpi/acexcep.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h
index 5958d7845bd5..17714beb868e 100644
--- a/include/acpi/acexcep.h
+++ b/include/acpi/acexcep.h
@@ -212,7 +212,7 @@ char const *acpi_gbl_exception_names_env[] = {
 	"AE_NO_GLOBAL_LOCK",
 	"AE_ABORT_METHOD",
 	"AE_SAME_HANDLER",
-	"AE_WAKE_ONLY_GPE",
+	"AE_NO_HANDLER",
 	"AE_OWNER_ID_LIMIT"
 };
 
-- 
cgit v1.2.3


From 9cbfa18e8a7b34a32eddbd914a07f085962f50a8 Mon Sep 17 00:00:00 2001
From: Bob Moore <robert.moore@intel.com>
Date: Wed, 26 May 2010 11:22:41 +0800
Subject: ACPICA: Limit maximum time for Sleep() operator

To prevent accidental deep sleeps, limit the maximum time that
Sleep() will sleep. Configurable, default maximum is two seconds.
ACPICA bugzilla 854.

http://www.acpica.org/bugzilla/show_bug.cgi?id=854

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpica/acconfig.h | 4 ++++
 drivers/acpi/acpica/exsystem.c | 8 ++++++++
 2 files changed, 12 insertions(+)

diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h
index 33181ad350d5..b17d8de9f6ff 100644
--- a/drivers/acpi/acpica/acconfig.h
+++ b/drivers/acpi/acpica/acconfig.h
@@ -119,6 +119,10 @@
 
 #define ACPI_MAX_LOOP_ITERATIONS        0xFFFF
 
+/* Maximum sleep allowed via Sleep() operator */
+
+#define ACPI_MAX_SLEEP                  20000	/* Two seconds */
+
 /******************************************************************************
  *
  * ACPI Specification constants (Do not change unless the specification changes)
diff --git a/drivers/acpi/acpica/exsystem.c b/drivers/acpi/acpica/exsystem.c
index 6d32e09327f1..675aaa91a770 100644
--- a/drivers/acpi/acpica/exsystem.c
+++ b/drivers/acpi/acpica/exsystem.c
@@ -201,6 +201,14 @@ acpi_status acpi_ex_system_do_sleep(u64 how_long)
 
 	acpi_ex_relinquish_interpreter();
 
+	/*
+	 * For compatibility with other ACPI implementations and to prevent
+	 * accidental deep sleeps, limit the sleep time to something reasonable.
+	 */
+	if (how_long > ACPI_MAX_SLEEP) {
+		how_long = ACPI_MAX_SLEEP;
+	}
+
 	acpi_os_sleep(how_long);
 
 	/* And now we must get the interpreter again */
-- 
cgit v1.2.3


From b681f7d9ab4d697a214fa4428795790c3a937a89 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg@redhat.com>
Date: Wed, 26 May 2010 11:50:48 +0800
Subject: ACPICA: Truncate I/O addresses to 16 bits for Windows compatibility

This feature is optional and is enabled if the BIOS requests any
Windows OSI strings. It can also be enabled by the host OS.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpica/acglobal.h |  8 ++++++++
 drivers/acpi/acpica/hwvalid.c  | 12 ++++++++++++
 drivers/acpi/acpica/nsinit.c   |  9 +++++++++
 include/acpi/acpixf.h          |  1 +
 4 files changed, 30 insertions(+)

diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index 9070f1fe8f17..899d68afc3c5 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -125,6 +125,14 @@ u8 ACPI_INIT_GLOBAL(acpi_gbl_enable_aml_debug_object, FALSE);
  */
 u8 ACPI_INIT_GLOBAL(acpi_gbl_copy_dsdt_locally, FALSE);
 
+/*
+ * Optionally truncate I/O addresses to 16 bits. Provides compatibility
+ * with other ACPI implementations. NOTE: During ACPICA initialization,
+ * this value is set to TRUE if any Windows OSI strings have been
+ * requested by the BIOS.
+ */
+u8 ACPI_INIT_GLOBAL(acpi_gbl_truncate_io_addresses, FALSE);
+
 /* acpi_gbl_FADT is a local copy of the FADT, converted to a common format. */
 
 struct acpi_table_fadt acpi_gbl_FADT;
diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c
index c10d587c1641..e1d9c777b213 100644
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -222,6 +222,12 @@ acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width)
 	u32 one_byte;
 	u32 i;
 
+	/* Truncate address to 16 bits if requested */
+
+	if (acpi_gbl_truncate_io_addresses) {
+		address &= ACPI_UINT16_MAX;
+	}
+
 	/* Validate the entire request and perform the I/O */
 
 	status = acpi_hw_validate_io_request(address, width);
@@ -279,6 +285,12 @@ acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width)
 	acpi_status status;
 	u32 i;
 
+	/* Truncate address to 16 bits if requested */
+
+	if (acpi_gbl_truncate_io_addresses) {
+		address &= ACPI_UINT16_MAX;
+	}
+
 	/* Validate the entire request and perform the I/O */
 
 	status = acpi_hw_validate_io_request(address, width);
diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c
index 9bd6f050f299..4e5272c313e0 100644
--- a/drivers/acpi/acpica/nsinit.c
+++ b/drivers/acpi/acpica/nsinit.c
@@ -193,6 +193,15 @@ acpi_status acpi_ns_initialize_devices(void)
 					acpi_ns_init_one_device, NULL, &info,
 					NULL);
 
+	/*
+	 * Any _OSI requests should be completed by now. If the BIOS has
+	 * requested any Windows OSI strings, we will always truncate
+	 * I/O addresses to 16 bits -- for Windows compatibility.
+	 */
+	if (acpi_gbl_osi_data >= ACPI_OSI_WIN_2000) {
+		acpi_gbl_truncate_io_addresses = TRUE;
+	}
+
 	ACPI_FREE(info.evaluate_info);
 	if (ACPI_FAILURE(status)) {
 		goto error_exit;
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 0e4ab1fe5966..1371cc997393 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -69,6 +69,7 @@ extern acpi_name acpi_gbl_trace_method_name;
 extern u32 acpi_gbl_trace_flags;
 extern u8 acpi_gbl_enable_aml_debug_object;
 extern u8 acpi_gbl_copy_dsdt_locally;
+extern u8 acpi_gbl_truncate_io_addresses;
 
 extern u32 acpi_current_gpe_count;
 extern struct acpi_table_fadt acpi_gbl_FADT;
-- 
cgit v1.2.3


From d49aba84fe775671133295658f43f4d142a517f9 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Tue, 8 Jun 2010 07:00:20 +0000
Subject: enic: fix pci_alloc_consistent argument

Fix build warning on i386 (32-bit) with 32-bit dma_addr_t:

drivers/net/enic/vnic_dev.c: In function 'vnic_dev_init_prov':
drivers/net/enic/vnic_dev.c:716: warning: passing argument 3 of 'pci_alloc_consistent' from incompatible pointer type
include/asm-generic/pci-dma-compat.h:16: note: expected 'dma_addr_t *' but argument is of type 'u64 *'

Now builds without warnings on i386 and on x86_64.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc:	Scott Feldman <scofeldm@cisco.com>
Cc:	Vasanthy Kolluri <vkolluri@cisco.com>
Cc:	Roopa Prabhu <roprabhu@cisco.com>
Acked-by: Scott Feldman <scofeldm@cisco.com>
---
 drivers/net/enic/vnic_dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/enic/vnic_dev.c b/drivers/net/enic/vnic_dev.c
index 2b3e16db5c82..e0d33281ec98 100644
--- a/drivers/net/enic/vnic_dev.c
+++ b/drivers/net/enic/vnic_dev.c
@@ -709,7 +709,7 @@ int vnic_dev_init_prov(struct vnic_dev *vdev, u8 *buf, u32 len)
 {
 	u64 a0, a1 = len;
 	int wait = 1000;
-	u64 prov_pa;
+	dma_addr_t prov_pa;
 	void *prov_buf;
 	int ret;
 
-- 
cgit v1.2.3


From 8acf7d00dfb62d7e5f2533c3f1132f60cb267369 Mon Sep 17 00:00:00 2001
From: Baruch Siach <baruch@tkos.co.il>
Date: Wed, 9 Jun 2010 14:07:02 +0300
Subject: watchdog: [PATCH 3/3] imx2_wdt: fix section mismatch
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
 drivers/watchdog/imx2_wdt.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index ea25885781bb..2ee7dac55a3c 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -330,7 +330,6 @@ static void imx2_wdt_shutdown(struct platform_device *pdev)
 }
 
 static struct platform_driver imx2_wdt_driver = {
-	.probe		= imx2_wdt_probe,
 	.remove		= __exit_p(imx2_wdt_remove),
 	.shutdown	= imx2_wdt_shutdown,
 	.driver		= {
-- 
cgit v1.2.3


From 9f069af5b62919151d76b37a3b168cbb34c874c3 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Wed, 19 May 2010 02:32:29 +0000
Subject: of: Drop properties with "/" in their name

Some bogus firmwares include properties with "/" in their name. This
causes problems when creating the /proc/device-tree file system,
because the slash is taken to indicate a directory.

We don't care about those properties, and we don't want to encourage
them, so just throw them away when creating /proc/device-tree.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 fs/proc/proc_devtree.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
index ce94801f48ca..d9396a4fc7ff 100644
--- a/fs/proc/proc_devtree.c
+++ b/fs/proc/proc_devtree.c
@@ -209,6 +209,9 @@ void proc_device_tree_add_node(struct device_node *np,
 	for (pp = np->properties; pp != NULL; pp = pp->next) {
 		p = pp->name;
 
+		if (strchr(p, '/'))
+			continue;
+
 		if (duplicate_name(de, p))
 			p = fixup_name(np, de, p);
 
-- 
cgit v1.2.3


From e897082fe7a5b591dc4dd5599ac39081a7c8e482 Mon Sep 17 00:00:00 2001
From: John Fastabend <john.r.fastabend@intel.com>
Date: Sun, 13 Jun 2010 10:36:30 +0000
Subject: net: fix deliver_no_wcard regression on loopback device

deliver_no_wcard is not being set in skb_copy_header.
In the skb_cloned case it is not being cleared and
may cause the skb to be dropped when the loopback device
pushes it back up the stack.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/skbuff.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 9f07e749d7b1..bcf2fa3e0ddc 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -532,6 +532,7 @@ static void __copy_skb_header(struct sk_buff *new, const struct sk_buff *old)
 	new->ip_summed		= old->ip_summed;
 	skb_copy_queue_mapping(new, old);
 	new->priority		= old->priority;
+	new->deliver_no_wcard	= old->deliver_no_wcard;
 #if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
 	new->ipvs_property	= old->ipvs_property;
 #endif
-- 
cgit v1.2.3


From e8d15e6460cb0eea00f2574a80d94496943403ba Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Sun, 13 Jun 2010 10:50:46 +0000
Subject: net: rxhash already set in __copy_skb_header

No need to copy rxhash again in __skb_clone()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/skbuff.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index bcf2fa3e0ddc..34432b4e96bb 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -570,7 +570,6 @@ static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb)
 	C(len);
 	C(data_len);
 	C(mac_len);
-	C(rxhash);
 	n->hdr_len = skb->nohdr ? skb_headroom(skb) : skb->hdr_len;
 	n->cloned = 1;
 	n->nohdr = 0;
-- 
cgit v1.2.3


From d08935c274b7e552e47633cf0cbd74b6e953d228 Mon Sep 17 00:00:00 2001
From: Don Skidmore <donald.c.skidmore@intel.com>
Date: Fri, 11 Jun 2010 13:20:29 +0000
Subject: ixgbe: fix for race with 8259(8|9) during shutdown

There is a small window where the watchdog could be running as the
interface is brought down on a NIC with two ports wired back to back.
If ixgbe_update_status is then called can lead to a panic.  This patch
allows the update to bail if we are in that condition.

This issue was orignally reported and fix proposed by Akihiko Saitou.

CC: Akihiko Saitou <asaitou@users.sourceforge.net>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index b2af2f67f604..ce30c62a97f7 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -5282,6 +5282,10 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 	u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot;
 	u64 non_eop_descs = 0, restart_queue = 0;
 
+	if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+	    test_bit(__IXGBE_RESETTING, &adapter->state))
+		return;
+
 	if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
 		u64 rsc_count = 0;
 		u64 rsc_flush = 0;
-- 
cgit v1.2.3


From 7837e58ce39bd727e0a163e7d34e479df36f6d29 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Fri, 11 Jun 2010 12:51:49 +0000
Subject: e1000: Fix message logging defect

commit 675ad47375c76a7c3be4ace9554d92cd55518ced
removed the capability to use ethtool.set_msglevel to
control the types of messages emitted by the driver.

That commit should probably be reverted.

If not, then this patch fixes a message logging defect
introduced by converting a printk without KERN_<level>
to e_info.

This also reduces text by about 200 bytes.

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000/e1000_main.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index ebdea0891665..68a80893dce1 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1047,15 +1047,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		goto err_register;
 
 	/* print bus type/speed/width info */
-	e_info("(PCI%s:%s:%s) ",
-		((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
-		((hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
-		 (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
-		 (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
-		 (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
-		((hw->bus_width == e1000_bus_width_64) ? "64-bit" : "32-bit"));
-
-	e_info("%pM\n", netdev->dev_addr);
+	e_info("(PCI%s:%dMHz:%d-bit) %pM\n",
+	       ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
+	       ((hw->bus_speed == e1000_bus_speed_133) ? 133 :
+		(hw->bus_speed == e1000_bus_speed_120) ? 120 :
+		(hw->bus_speed == e1000_bus_speed_100) ? 100 :
+		(hw->bus_speed == e1000_bus_speed_66) ? 66 : 33),
+	       ((hw->bus_width == e1000_bus_width_64) ? 64 : 32),
+	       netdev->dev_addr);
 
 	/* carrier off reporting is important to ethtool even BEFORE open */
 	netif_carrier_off(netdev);
-- 
cgit v1.2.3


From 28c8e4790ca5ef75f54895ca46437f9fbb433ddf Mon Sep 17 00:00:00 2001
From: Andy Gospodarek <andy@greyhouse.net>
Date: Fri, 11 Jun 2010 12:47:03 +0000
Subject: ixgbe: fix automatic LRO/RSC settings for low latency

This patch added to 2.6.34:

	commit f8d1dcaf88bddc7f282722ec1fdddbcb06a72f18
	Author: Jesse Brandeburg <jesse.brandeburg@intel.com>
	Date:   Tue Apr 27 01:37:20 2010 +0000

	    ixgbe: enable extremely low latency

introduced a feature where LRO (called RSC on the hardware) was disabled
automatically when setting rx-usecs to 0 via ethtool.  Some might not
like the fact that LRO was disabled automatically, but I'm fine with
that.  What I don't like is that LRO/RSC is automatically enabled when
rx-usecs is set >0 via ethtool.

This would certainly be a problem if the device was used for forwarding
and it was determined that the low latency wasn't needed after the
device was already forwarding.  I played around with saving the state of
LRO in the driver, but it just didn't seem worthwhile and would require
a small change to dev_disable_lro() that I did not like.

This patch simply leaves LRO disabled when setting rx-usecs >0 and
requires that the user enable it again.  An extra informational message
will also now appear in the log so users can understand why LRO isn't
being enabled as they expect.

Inconsistency of LRO setting first noticed by Stanislaw Gruszka.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
CC: Stanislaw Gruszka <sgruszka@redhat.com>
CC: stable@kernel.org
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_ethtool.c | 37 ++++++++-----------------------------
 1 file changed, 8 insertions(+), 29 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index c50a7541ffec..3a93a81872b8 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -2077,25 +2077,6 @@ static int ixgbe_get_coalesce(struct net_device *netdev,
 	return 0;
 }
 
-/*
- * this function must be called before setting the new value of
- * rx_itr_setting
- */
-static bool ixgbe_reenable_rsc(struct ixgbe_adapter *adapter,
-                               struct ethtool_coalesce *ec)
-{
-	/* check the old value and enable RSC if necessary */
-	if ((adapter->rx_itr_setting == 0) &&
-	    (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) {
-		adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
-		adapter->netdev->features |= NETIF_F_LRO;
-		DPRINTK(PROBE, INFO, "rx-usecs set to %d, re-enabling RSC\n",
-		        ec->rx_coalesce_usecs);
-		return true;
-	}
-	return false;
-}
-
 static int ixgbe_set_coalesce(struct net_device *netdev,
                               struct ethtool_coalesce *ec)
 {
@@ -2124,9 +2105,6 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
 		    (1000000/ec->rx_coalesce_usecs < IXGBE_MIN_INT_RATE))
 			return -EINVAL;
 
-		/* check the old value and enable RSC if necessary */
-		need_reset = ixgbe_reenable_rsc(adapter, ec);
-
 		/* store the value in ints/second */
 		adapter->rx_eitr_param = 1000000/ec->rx_coalesce_usecs;
 
@@ -2135,9 +2113,6 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
 		/* clear the lower bit as its used for dynamic state */
 		adapter->rx_itr_setting &= ~1;
 	} else if (ec->rx_coalesce_usecs == 1) {
-		/* check the old value and enable RSC if necessary */
-		need_reset = ixgbe_reenable_rsc(adapter, ec);
-
 		/* 1 means dynamic mode */
 		adapter->rx_eitr_param = 20000;
 		adapter->rx_itr_setting = 1;
@@ -2157,10 +2132,11 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
 		 */
 		if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
 			adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
-			netdev->features &= ~NETIF_F_LRO;
-			DPRINTK(PROBE, INFO,
-			        "rx-usecs set to 0, disabling RSC\n");
-
+			if (netdev->features & NETIF_F_LRO) {
+				netdev->features &= ~NETIF_F_LRO;
+				DPRINTK(PROBE, INFO, "rx-usecs set to 0, "
+					"disabling LRO/RSC\n");
+			}
 			need_reset = true;
 		}
 	}
@@ -2255,6 +2231,9 @@ static int ixgbe_set_flags(struct net_device *netdev, u32 data)
 			}
 		} else if (!adapter->rx_itr_setting) {
 			netdev->features &= ~ETH_FLAG_LRO;
+			if (data & ETH_FLAG_LRO)
+				DPRINTK(PROBE, INFO, "rx-usecs set to 0, "
+					"LRO/RSC cannot be enabled.\n");
 		}
 	}
 
-- 
cgit v1.2.3


From b8f171e7e7ed5c9b77324bcc6bb580ddcc84da49 Mon Sep 17 00:00:00 2001
From: Alex Murray <murray.alex@gmail.com>
Date: Mon, 14 Jun 2010 12:08:43 +0930
Subject: ALSA: hda - Fix line-in for mb5 model MacBook (Pro) 5,1 / 5,2

The line-in input is 0x7 not 0x2 for MacBook (Pro) 5,1 / 5,2 models

Signed-off-by: Alex Murray <murray.alex@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index f6cd8ed3272f..f1ce7d7f5aa3 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6950,7 +6950,7 @@ static struct hda_input_mux mb5_capture_source = {
 	.num_items = 3,
 	.items = {
 		{ "Mic", 0x1 },
-		{ "Line", 0x2 },
+		{ "Line", 0x7 },
 		{ "CD", 0x4 },
 	},
 };
@@ -7471,8 +7471,8 @@ static struct snd_kcontrol_new alc885_mb5_mixer[] = {
 	HDA_BIND_MUTE   ("LFE Playback Switch", 0x0e, 0x02, HDA_INPUT),
 	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
 	HDA_BIND_MUTE   ("Headphone Playback Switch", 0x0f, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE  ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x07, HDA_INPUT),
+	HDA_CODEC_MUTE  ("Line Playback Switch", 0x0b, 0x07, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
 	HDA_CODEC_MUTE  ("Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
 	HDA_CODEC_VOLUME("Line Boost", 0x15, 0x00, HDA_INPUT),
@@ -7855,10 +7855,9 @@ static struct hda_verb alc885_mb5_init_verbs[] = {
 	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
 	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
 
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0x1)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0x7)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0x4)},
 	{ }
 };
 
-- 
cgit v1.2.3


From da5ae1cfff4cc5b9392eab59b227ad907626d7aa Mon Sep 17 00:00:00 2001
From: Reinette Chatre <reinette.chatre@intel.com>
Date: Fri, 28 May 2010 09:28:39 -0700
Subject: iwlwifi: serialize station management actions

We are seeing some race conditions between incoming station management
requests (station add/remove) and the internal unassoc RXON command that
modifies station table. Modify these flows to require the mutex to be held
and thus serializing them.

This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2207

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c      | 8 ++++++--
 drivers/net/wireless/iwlwifi/iwl-sta.c      | 4 ++++
 drivers/net/wireless/iwlwifi/iwl3945-base.c | 9 +++++++--
 3 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 7726e67044c0..24aff654fa9c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3391,10 +3391,12 @@ static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
 	int ret;
 	u8 sta_id;
 
-	sta_priv->common.sta_id = IWL_INVALID_STATION;
-
 	IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
 			sta->addr);
+	mutex_lock(&priv->mutex);
+	IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
+			sta->addr);
+	sta_priv->common.sta_id = IWL_INVALID_STATION;
 
 	atomic_set(&sta_priv->pending_frames, 0);
 	if (vif->type == NL80211_IFTYPE_AP)
@@ -3406,6 +3408,7 @@ static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
 		IWL_ERR(priv, "Unable to add station %pM (%d)\n",
 			sta->addr, ret);
 		/* Should we return success if return code is EEXIST ? */
+		mutex_unlock(&priv->mutex);
 		return ret;
 	}
 
@@ -3415,6 +3418,7 @@ static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
 	IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
 		       sta->addr);
 	iwl_rs_rate_init(priv, sta, sta_id);
+	mutex_unlock(&priv->mutex);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 83a26361a9b5..c27c13fbb1ae 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -1373,10 +1373,14 @@ int iwl_mac_sta_remove(struct ieee80211_hw *hw,
 
 	IWL_DEBUG_INFO(priv, "received request to remove station %pM\n",
 			sta->addr);
+	mutex_lock(&priv->mutex);
+	IWL_DEBUG_INFO(priv, "proceeding to remove station %pM\n",
+			sta->addr);
 	ret = iwl_remove_station(priv, sta_common->sta_id, sta->addr);
 	if (ret)
 		IWL_ERR(priv, "Error removing station %pM\n",
 			sta->addr);
+	mutex_unlock(&priv->mutex);
 	return ret;
 }
 EXPORT_SYMBOL(iwl_mac_sta_remove);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 6c353cacc8d6..a27872de4106 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -3437,10 +3437,13 @@ static int iwl3945_mac_sta_add(struct ieee80211_hw *hw,
 	bool is_ap = vif->type == NL80211_IFTYPE_STATION;
 	u8 sta_id;
 
-	sta_priv->common.sta_id = IWL_INVALID_STATION;
-
 	IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
 			sta->addr);
+	mutex_lock(&priv->mutex);
+	IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
+			sta->addr);
+	sta_priv->common.sta_id = IWL_INVALID_STATION;
+
 
 	ret = iwl_add_station_common(priv, sta->addr, is_ap, &sta->ht_cap,
 				     &sta_id);
@@ -3448,6 +3451,7 @@ static int iwl3945_mac_sta_add(struct ieee80211_hw *hw,
 		IWL_ERR(priv, "Unable to add station %pM (%d)\n",
 			sta->addr, ret);
 		/* Should we return success if return code is EEXIST ? */
+		mutex_unlock(&priv->mutex);
 		return ret;
 	}
 
@@ -3457,6 +3461,7 @@ static int iwl3945_mac_sta_add(struct ieee80211_hw *hw,
 	IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
 		       sta->addr);
 	iwl3945_rs_rate_init(priv, sta, sta_id);
+	mutex_unlock(&priv->mutex);
 
 	return 0;
 }
-- 
cgit v1.2.3


From b561e8274f75831ee87e4ea378cbb1f9f050a51a Mon Sep 17 00:00:00 2001
From: Shanyu Zhao <shanyu.zhao@intel.com>
Date: Tue, 1 Jun 2010 17:13:58 -0700
Subject: iwlagn: verify flow id in compressed BA packet

The flow id (scd_flow) in a compressed BA packet should match the txq_id
of the queue from which the aggregated packets were sent. However, in
some hardware like the 1000 series, sometimes the flow id is 0 for the
txq_id (10 to 19). This can cause the annoying message:
[ 2213.306191] iwlagn 0000:01:00.0: Received BA when not expected
[ 2213.310178] iwlagn 0000:01:00.0: Read index for DMA queue txq id (0),
index 5, is out of range [0-256] 7 7.

And even worse, if agg->wait_for_ba is true when the bad BA is arriving,
this can cause system hang due to NULL pointer dereference because the
code is operating in a wrong tx queue!

Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com>
Signed-off-by: Pradeep Kulkarni <pradeepx.kulkarni@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn-tx.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
index a732f1094e5d..7d614c4d3c62 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
@@ -1299,6 +1299,11 @@ void iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv,
 	sta_id = ba_resp->sta_id;
 	tid = ba_resp->tid;
 	agg = &priv->stations[sta_id].tid[tid].agg;
+	if (unlikely(agg->txq_id != scd_flow)) {
+		IWL_ERR(priv, "BA scd_flow %d does not match txq_id %d\n",
+			scd_flow, agg->txq_id);
+		return;
+	}
 
 	/* Find index just before block-ack window */
 	index = iwl_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd);
-- 
cgit v1.2.3


From 13deb23a52c13053fc509f119eb80b903c65a879 Mon Sep 17 00:00:00 2001
From: Prarit Bhargava <prarit@redhat.com>
Date: Thu, 10 Jun 2010 08:08:42 -0400
Subject: libertas_tf: Fix warning in lbtf_rx for stats struct

Fixes linux-2.6 warning:

drivers/net/wireless/libertas_tf/main.c: In function 'lbtf_rx':
drivers/net/wireless/libertas_tf/main.c:578: warning: 'stats.antenna' is used uninitialized in this function
drivers/net/wireless/libertas_tf/main.c:578: warning: 'stats.mactime' is used uninitialized in this function

stats struct needs to be set to 0 before use.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas_tf/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index 6a04c2157f73..817fffc0de4b 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -549,7 +549,7 @@ int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb)
 
 	prxpd = (struct rxpd *) skb->data;
 
-	stats.flag = 0;
+	memset(&stats, 0, sizeof(stats));
 	if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK)))
 		stats.flag |= RX_FLAG_FAILED_FCS_CRC;
 	stats.freq = priv->cur_freq;
-- 
cgit v1.2.3


From 50900f1698f68127e54c67fdfe829e4a97b1be2b Mon Sep 17 00:00:00 2001
From: Joerg Albert <jal2@gmx.de>
Date: Sun, 13 Jun 2010 14:22:23 +0200
Subject: p54pci: add Symbol AP-300 minipci adapters pciid

Cc: stable@kernel.org
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54pci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index 07c4528f6e6b..a5ea89cde8c4 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -41,6 +41,8 @@ static DEFINE_PCI_DEVICE_TABLE(p54p_table) = {
 	{ PCI_DEVICE(0x1260, 0x3877) },
 	/* Intersil PRISM Javelin/Xbow Wireless LAN adapter */
 	{ PCI_DEVICE(0x1260, 0x3886) },
+	/* Intersil PRISM Xbow Wireless LAN adapter (Symbol AP-300) */
+	{ PCI_DEVICE(0x1260, 0xffff) },
 	{ },
 };
 
-- 
cgit v1.2.3


From e7fdc95ef8e914ae8625f2ae4b3775b2bc435d3a Mon Sep 17 00:00:00 2001
From: Zhu Yi <yi.zhu@intel.com>
Date: Thu, 10 Jun 2010 09:44:29 +0800
Subject: wireless: orphan ipw2x00 drivers

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 MAINTAINERS | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 83be538d26c4..837a7547786b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2966,20 +2966,14 @@ F:	drivers/net/ixgb/
 F:	drivers/net/ixgbe/
 
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
-M:	Reinette Chatre <reinette.chatre@intel.com>
-M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://ipw2100.sourceforge.net
-S:	Odd Fixes
+S:	Orphan
 F:	Documentation/networking/README.ipw2100
 F:	drivers/net/wireless/ipw2x00/ipw2100.*
 
 INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
-M:	Reinette Chatre <reinette.chatre@intel.com>
-M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://ipw2200.sourceforge.net
-S:	Odd Fixes
+S:	Orphan
 F:	Documentation/networking/README.ipw2200
 F:	drivers/net/wireless/ipw2x00/ipw2200.*
 
-- 
cgit v1.2.3


From 02a077c52ef7631275a79862ffd9f3dbe9d38bc2 Mon Sep 17 00:00:00 2001
From: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Date: Mon, 14 Jun 2010 13:58:22 -0300
Subject: TPM: ReadPubEK output struct fix

This patch adds a missing element of the ReadPubEK command output,
that prevents future overflow of this buffer when copying the
TPM output result into it.

Prevents a kernel panic in case the user tries to read the
pubek from sysfs.

Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 drivers/char/tpm/tpm.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 8e00b4ddd083..792868d24f2a 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -224,6 +224,7 @@ struct	tpm_readpubek_params_out {
 	u8	algorithm[4];
 	u8	encscheme[2];
 	u8	sigscheme[2];
+	__be32	paramsize;
 	u8	parameters[12]; /*assuming RSA*/
 	__be32	keysize;
 	u8	modulus[256];
-- 
cgit v1.2.3


From 8054a3428fbec2d91dfeb5bd78d7e75064cf163b Mon Sep 17 00:00:00 2001
From: Christoph Egger <siccegge@cs.fau.de>
Date: Tue, 8 Jun 2010 23:59:55 +0000
Subject: powerpc: Remove dead CONFIG_HIGHPTE

CONFIG_HIGHPTE doesn't exist in Kconfig, therefore removing all
references for it from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/pgtable_32.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 9fc02dc72ce9..34347b2e7e31 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -115,11 +115,7 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
 {
 	struct page *ptepage;
 
-#ifdef CONFIG_HIGHPTE
-	gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT | __GFP_ZERO;
-#else
 	gfp_t flags = GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO;
-#endif
 
 	ptepage = alloc_pages(flags, 0);
 	if (!ptepage)
-- 
cgit v1.2.3


From b5416ca9f824d3deb1e25a32683100360e104b72 Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Mon, 7 Jun 2010 15:34:38 +0000
Subject: powerpc: Move kdump default base address to 64MB on 64bit

We are seeing boot fails on some System p machines when using the kdump
crashkernel= boot option. The default kdump base address is 32MB, so if we
reserve 256MB for kdump then we reserve all of the RMO except the first 32MB.

We really want kdump to reserve some memory in the RMO and most of it
elsewhere but that will require more significant changes. For now we can shift
the default base address to 64MB when CONFIG_PPC64 and CONFIG_RELOCATABLE are
set. This isn't quite correct since what we really care about is the kdump
kernel is relocatable, but we already make the assumption that base kernel
and kdump kernel have the same CONFIG_RELOCATABLE setting, eg:

#ifndef CONFIG_RELOCATABLE
        if (crashk_res.start != KDUMP_KERNELBASE)
                printk("Crash kernel location must be 0x%x\n",
                                KDUMP_KERNELBASE);
...

RTAS is instantiated towards the top of our RMO, so if we were to go any
higher we risk not having enough RMO memory for the kdump kernel on boxes
with a 128MB RMO.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/kdump.h | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h
index 5ebfe5d3c61f..6857af58b02e 100644
--- a/arch/powerpc/include/asm/kdump.h
+++ b/arch/powerpc/include/asm/kdump.h
@@ -3,8 +3,17 @@
 
 #include <asm/page.h>
 
-/* Kdump kernel runs at 32 MB, change at your peril. */
+/*
+ * If CONFIG_RELOCATABLE is enabled we can place the kdump kernel anywhere.
+ * To keep enough space in the RMO for the first stage kernel on 64bit, we
+ * place it at 64MB. If CONFIG_RELOCATABLE is not enabled we must place
+ * the second stage at 32MB.
+ */
+#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_PPC64)
+#define KDUMP_KERNELBASE	0x4000000
+#else
 #define KDUMP_KERNELBASE	0x2000000
+#endif
 
 /* How many bytes to reserve at zero for kdump. The reserve limit should
  * be greater or equal to the trampoline's end address.
-- 
cgit v1.2.3


From 97bb63e49600c18a8e8384d9c445b8c8b5b792af Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Mon, 7 Jun 2010 14:27:10 +0000
Subject: powerpc/boot: Remove addRamdisk.c since it is now unused

It was used in the dim distant past for adding initrds to images
for legacy iSeries, but it's not even used for that now that we
have initramfs.  So remove it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/Makefile     |   2 +-
 arch/powerpc/boot/addRamDisk.c | 311 -----------------------------------------
 2 files changed, 1 insertion(+), 312 deletions(-)
 delete mode 100644 arch/powerpc/boot/addRamDisk.c

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index ad0df7d0a643..fae8192c8fcc 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -141,7 +141,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
 $(obj)/wrapper.a: $(obj-wlib) FORCE
 	$(call if_changed,bootar)
 
-hostprogs-y	:= addnote addRamDisk hack-coff mktree
+hostprogs-y	:= addnote hack-coff mktree
 
 targets		+= $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
 extra-y		:= $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
diff --git a/arch/powerpc/boot/addRamDisk.c b/arch/powerpc/boot/addRamDisk.c
deleted file mode 100644
index 893f446cbd22..000000000000
--- a/arch/powerpc/boot/addRamDisk.c
+++ /dev/null
@@ -1,311 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <netinet/in.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <elf.h>
-
-#define ElfHeaderSize  (64 * 1024)
-#define ElfPages  (ElfHeaderSize / 4096)
-#define KERNELBASE (0xc000000000000000)
-#define _ALIGN_UP(addr,size)	(((addr)+((size)-1))&(~((size)-1)))
-
-struct addr_range {
-	unsigned long long addr;
-	unsigned long memsize;
-	unsigned long offset;
-};
-
-static int check_elf64(void *p, int size, struct addr_range *r)
-{
-	Elf64_Ehdr *elf64 = p;
-	Elf64_Phdr *elf64ph;
-
-	if (elf64->e_ident[EI_MAG0] != ELFMAG0 ||
-	    elf64->e_ident[EI_MAG1] != ELFMAG1 ||
-	    elf64->e_ident[EI_MAG2] != ELFMAG2 ||
-	    elf64->e_ident[EI_MAG3] != ELFMAG3 ||
-	    elf64->e_ident[EI_CLASS] != ELFCLASS64 ||
-	    elf64->e_ident[EI_DATA] != ELFDATA2MSB ||
-	    elf64->e_type != ET_EXEC || elf64->e_machine != EM_PPC64)
-		return 0;
-
-	if ((elf64->e_phoff + sizeof(Elf64_Phdr)) > size)
-		return 0;
-
-	elf64ph = (Elf64_Phdr *) ((unsigned long)elf64 +
-				  (unsigned long)elf64->e_phoff);
-
-	r->memsize = (unsigned long)elf64ph->p_memsz;
-	r->offset = (unsigned long)elf64ph->p_offset;
-	r->addr = (unsigned long long)elf64ph->p_vaddr;
-
-#ifdef DEBUG
-	printf("PPC64 ELF file, ph:\n");
-	printf("p_type   0x%08x\n", elf64ph->p_type);
-	printf("p_flags  0x%08x\n", elf64ph->p_flags);
-	printf("p_offset 0x%016llx\n", elf64ph->p_offset);
-	printf("p_vaddr  0x%016llx\n", elf64ph->p_vaddr);
-	printf("p_paddr  0x%016llx\n", elf64ph->p_paddr);
-	printf("p_filesz 0x%016llx\n", elf64ph->p_filesz);
-	printf("p_memsz  0x%016llx\n", elf64ph->p_memsz);
-	printf("p_align  0x%016llx\n", elf64ph->p_align);
-	printf("... skipping 0x%08lx bytes of ELF header\n",
-	       (unsigned long)elf64ph->p_offset);
-#endif
-
-	return 64;
-}
-static void get4k(FILE *file, char *buf )
-{
-	unsigned j;
-	unsigned num = fread(buf, 1, 4096, file);
-	for ( j=num; j<4096; ++j )
-		buf[j] = 0;
-}
-
-static void put4k(FILE *file, char *buf )
-{
-	fwrite(buf, 1, 4096, file);
-}
-
-static void death(const char *msg, FILE *fdesc, const char *fname)
-{
-	fprintf(stderr, msg);
-	fclose(fdesc);
-	unlink(fname);
-	exit(1);
-}
-
-int main(int argc, char **argv)
-{
-	char inbuf[4096];
-	struct addr_range vmlinux;
-	FILE *ramDisk;
-	FILE *inputVmlinux;
-	FILE *outputVmlinux;
-
-	char *rd_name, *lx_name, *out_name;
-
-	size_t i;
-	unsigned long ramFileLen;
-	unsigned long ramLen;
-	unsigned long roundR;
-	unsigned long offset_end;
-
-	unsigned long kernelLen;
-	unsigned long actualKernelLen;
-	unsigned long round;
-	unsigned long roundedKernelLen;
-	unsigned long ramStartOffs;
-	unsigned long ramPages;
-	unsigned long roundedKernelPages;
-	unsigned long hvReleaseData;
-	u_int32_t eyeCatcher = 0xc8a5d9c4;
-	unsigned long naca;
-	unsigned long xRamDisk;
-	unsigned long xRamDiskSize;
-	long padPages;
-  
-  
-	if (argc < 2) {
-		fprintf(stderr, "Name of RAM disk file missing.\n");
-		exit(1);
-	}
-	rd_name = argv[1];
-
-	if (argc < 3) {
-		fprintf(stderr, "Name of vmlinux file missing.\n");
-		exit(1);
-	}
-	lx_name = argv[2];
-
-	if (argc < 4) {
-		fprintf(stderr, "Name of vmlinux output file missing.\n");
-		exit(1);
-	}
-	out_name = argv[3];
-
-
-	ramDisk = fopen(rd_name, "r");
-	if ( ! ramDisk ) {
-		fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", rd_name);
-		exit(1);
-	}
-
-	inputVmlinux = fopen(lx_name, "r");
-	if ( ! inputVmlinux ) {
-		fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", lx_name);
-		exit(1);
-	}
-  
-	outputVmlinux = fopen(out_name, "w+");
-	if ( ! outputVmlinux ) {
-		fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", out_name);
-		exit(1);
-	}
-
-	i = fread(inbuf, 1, sizeof(inbuf), inputVmlinux);
-	if (i != sizeof(inbuf)) {
-		fprintf(stderr, "can not read vmlinux file %s: %u\n", lx_name, i);
-		exit(1);
-	}
-
-	i = check_elf64(inbuf, sizeof(inbuf), &vmlinux);
-	if (i == 0) {
-		fprintf(stderr, "You must have a linux kernel specified as argv[2]\n");
-		exit(1);
-	}
-
-	/* Input Vmlinux file */
-	fseek(inputVmlinux, 0, SEEK_END);
-	kernelLen = ftell(inputVmlinux);
-	fseek(inputVmlinux, 0, SEEK_SET);
-	printf("kernel file size = %lu\n", kernelLen);
-
-	actualKernelLen = kernelLen - ElfHeaderSize;
-
-	printf("actual kernel length (minus ELF header) = %lu\n", actualKernelLen);
-
-	round = actualKernelLen % 4096;
-	roundedKernelLen = actualKernelLen;
-	if ( round )
-		roundedKernelLen += (4096 - round);
-	printf("Vmlinux length rounded up to a 4k multiple = %ld/0x%lx \n", roundedKernelLen, roundedKernelLen);
-	roundedKernelPages = roundedKernelLen / 4096;
-	printf("Vmlinux pages to copy = %ld/0x%lx \n", roundedKernelPages, roundedKernelPages);
-
-	offset_end = _ALIGN_UP(vmlinux.memsize, 4096);
-	/* calc how many pages we need to insert between the vmlinux and the start of the ram disk */
-	padPages = offset_end/4096 - roundedKernelPages;
-
-	/* Check and see if the vmlinux is already larger than _end in System.map */
-	if (padPages < 0) {
-		/* vmlinux is larger than _end - adjust the offset to the start of the embedded ram disk */ 
-		offset_end = roundedKernelLen;
-		printf("vmlinux is larger than _end indicates it needs to be - offset_end = %lx \n", offset_end);
-		padPages = 0;
-		printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
-	}
-	else {
-		/* _end is larger than vmlinux - use the offset to _end that we calculated from the system map */
-		printf("vmlinux is smaller than _end indicates is needed - offset_end = %lx \n", offset_end);
-		printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
-	}
-
-
-
-	/* Input Ram Disk file */
-	// Set the offset that the ram disk will be started at.
-	ramStartOffs = offset_end;  /* determined from the input vmlinux file and the system map */
-	printf("Ram Disk will start at offset = 0x%lx \n", ramStartOffs);
-  
-	fseek(ramDisk, 0, SEEK_END);
-	ramFileLen = ftell(ramDisk);
-	fseek(ramDisk, 0, SEEK_SET);
-	printf("%s file size = %ld/0x%lx \n", rd_name, ramFileLen, ramFileLen);
-
-	ramLen = ramFileLen;
-
-	roundR = 4096 - (ramLen % 4096);
-	if ( roundR ) {
-		printf("Rounding RAM disk file up to a multiple of 4096, adding %ld/0x%lx \n", roundR, roundR);
-		ramLen += roundR;
-	}
-
-	printf("Rounded RAM disk size is %ld/0x%lx \n", ramLen, ramLen);
-	ramPages = ramLen / 4096;
-	printf("RAM disk pages to copy = %ld/0x%lx\n", ramPages, ramPages);
-
-
-
-  // Copy 64K ELF header
-	for (i=0; i<(ElfPages); ++i) {
-		get4k( inputVmlinux, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-
-	/* Copy the vmlinux (as full pages). */
-	fseek(inputVmlinux, ElfHeaderSize, SEEK_SET);
-	for ( i=0; i<roundedKernelPages; ++i ) {
-		get4k( inputVmlinux, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-  
-	/* Insert pad pages (if appropriate) that are needed between */
-	/* | the end of the vmlinux and the ram disk. */
-	for (i=0; i<padPages; ++i) {
-		memset(inbuf, 0, 4096);
-		put4k(outputVmlinux, inbuf);
-	}
-
-	/* Copy the ram disk (as full pages). */
-	for ( i=0; i<ramPages; ++i ) {
-		get4k( ramDisk, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-
-	/* Close the input files */
-	fclose(ramDisk);
-	fclose(inputVmlinux);
-	/* And flush the written output file */
-	fflush(outputVmlinux);
-
-
-
-	/* Fixup the new vmlinux to contain the ram disk starting offset (xRamDisk) and the ram disk size (xRamDiskSize) */
-	/* fseek to the hvReleaseData pointer */
-	fseek(outputVmlinux, ElfHeaderSize + 0x24, SEEK_SET);
-	if (fread(&hvReleaseData, 4, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData pointer\n", outputVmlinux, out_name);
-	}
-	hvReleaseData = ntohl(hvReleaseData); /* Convert to native int */
-	printf("hvReleaseData is at %08lx\n", hvReleaseData);
-
-	/* fseek to the hvReleaseData */
-	fseek(outputVmlinux, ElfHeaderSize + hvReleaseData, SEEK_SET);
-	if (fread(inbuf, 0x40, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData\n", outputVmlinux, out_name);
-	}
-	/* Check hvReleaseData sanity */
-	if (memcmp(inbuf, &eyeCatcher, 4) != 0) {
-		death("hvReleaseData is invalid\n", outputVmlinux, out_name);
-	}
-	/* Get the naca pointer */
-	naca = ntohl(*((u_int32_t*) &inbuf[0x0C])) - KERNELBASE;
-	printf("Naca is at offset 0x%lx \n", naca);
-
-	/* fseek to the naca */
-	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-	if (fread(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not read naca\n", outputVmlinux, out_name);
-	}
-	xRamDisk = ntohl(*((u_int32_t *) &inbuf[0x0c]));
-	xRamDiskSize = ntohl(*((u_int32_t *) &inbuf[0x14]));
-	/* Make sure a RAM disk isn't already present */
-	if ((xRamDisk != 0) || (xRamDiskSize != 0)) {
-		death("RAM disk is already attached to this kernel\n", outputVmlinux, out_name);
-	}
-	/* Fill in the values */
-	*((u_int32_t *) &inbuf[0x0c]) = htonl(ramStartOffs);
-	*((u_int32_t *) &inbuf[0x14]) = htonl(ramPages);
-
-	/* Write out the new naca */
-	fflush(outputVmlinux);
-	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-	if (fwrite(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not write naca\n", outputVmlinux, out_name);
-	}
-	printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08lx\n",
-	       ramPages, ramStartOffs);
-
-	/* Done */
-	fclose(outputVmlinux);
-	/* Set permission to executable */
-	chmod(out_name, S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH);
-
-	return 0;
-}
-
-- 
cgit v1.2.3


From 65cf840ff4b63852d34d577d559978ccfc554a6c Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Sun, 6 Jun 2010 17:46:03 +0000
Subject: powerpc: Disable CONFIG_SYSFS_DEPRECATED

Acked-by: Grant Likely <grant.likely@secretlab.ca>

On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote:

CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not
be required for any distro in the last 3 or 4 years, so disable it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/configs/40x/acadia_defconfig        | 3 +--
 arch/powerpc/configs/40x/ep405_defconfig         | 3 +--
 arch/powerpc/configs/40x/hcu4_defconfig          | 3 +--
 arch/powerpc/configs/40x/kilauea_defconfig       | 3 +--
 arch/powerpc/configs/40x/makalu_defconfig        | 3 +--
 arch/powerpc/configs/40x/virtex_defconfig        | 3 +--
 arch/powerpc/configs/40x/walnut_defconfig        | 3 +--
 arch/powerpc/configs/44x/arches_defconfig        | 3 +--
 arch/powerpc/configs/44x/bamboo_defconfig        | 3 +--
 arch/powerpc/configs/44x/canyonlands_defconfig   | 3 +--
 arch/powerpc/configs/44x/ebony_defconfig         | 3 +--
 arch/powerpc/configs/44x/eiger_defconfig         | 3 +--
 arch/powerpc/configs/44x/katmai_defconfig        | 3 +--
 arch/powerpc/configs/44x/rainier_defconfig       | 3 +--
 arch/powerpc/configs/44x/redwood_defconfig       | 3 +--
 arch/powerpc/configs/44x/sam440ep_defconfig      | 3 +--
 arch/powerpc/configs/44x/sequoia_defconfig       | 3 +--
 arch/powerpc/configs/44x/taishan_defconfig       | 3 +--
 arch/powerpc/configs/44x/virtex5_defconfig       | 3 +--
 arch/powerpc/configs/52xx/cm5200_defconfig       | 3 +--
 arch/powerpc/configs/52xx/lite5200b_defconfig    | 3 +--
 arch/powerpc/configs/52xx/motionpro_defconfig    | 3 +--
 arch/powerpc/configs/52xx/pcm030_defconfig       | 3 +--
 arch/powerpc/configs/52xx/tqm5200_defconfig      | 3 +--
 arch/powerpc/configs/86xx/gef_ppc9a_defconfig    | 3 +--
 arch/powerpc/configs/86xx/gef_sbc310_defconfig   | 3 +--
 arch/powerpc/configs/86xx/gef_sbc610_defconfig   | 3 +--
 arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig | 3 +--
 arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig | 3 +--
 arch/powerpc/configs/86xx/sbc8641d_defconfig     | 3 +--
 arch/powerpc/configs/adder875_defconfig          | 3 +--
 arch/powerpc/configs/amigaone_defconfig          | 3 +--
 arch/powerpc/configs/c2k_defconfig               | 3 +--
 arch/powerpc/configs/cell_defconfig              | 3 +--
 arch/powerpc/configs/celleb_defconfig            | 3 +--
 arch/powerpc/configs/chrp32_defconfig            | 3 +--
 arch/powerpc/configs/ep8248e_defconfig           | 3 +--
 arch/powerpc/configs/ep88xc_defconfig            | 3 +--
 arch/powerpc/configs/g5_defconfig                | 3 +--
 arch/powerpc/configs/gamecube_defconfig          | 3 +--
 arch/powerpc/configs/holly_defconfig             | 1 -
 arch/powerpc/configs/iseries_defconfig           | 3 +--
 arch/powerpc/configs/linkstation_defconfig       | 3 +--
 arch/powerpc/configs/maple_defconfig             | 3 +--
 arch/powerpc/configs/mgcoge_defconfig            | 3 +--
 arch/powerpc/configs/mgsuvd_defconfig            | 3 +--
 arch/powerpc/configs/mpc512x_defconfig           | 3 +--
 arch/powerpc/configs/mpc5200_defconfig           | 3 +--
 arch/powerpc/configs/mpc7448_hpc2_defconfig      | 3 +--
 arch/powerpc/configs/pasemi_defconfig            | 3 +--
 arch/powerpc/configs/pmac32_defconfig            | 3 +--
 arch/powerpc/configs/ppc40x_defconfig            | 3 +--
 arch/powerpc/configs/ppc44x_defconfig            | 3 +--
 arch/powerpc/configs/ppc64_defconfig             | 3 +--
 arch/powerpc/configs/ppc64e_defconfig            | 3 +--
 arch/powerpc/configs/pq2fads_defconfig           | 3 +--
 arch/powerpc/configs/prpmc2800_defconfig         | 3 +--
 arch/powerpc/configs/pseries_defconfig           | 3 +--
 arch/powerpc/configs/storcenter_defconfig        | 3 +--
 arch/powerpc/configs/wii_defconfig               | 3 +--
 60 files changed, 59 insertions(+), 119 deletions(-)

diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig
index 8e95f8d227b9..4aa17b676a3f 100644
--- a/arch/powerpc/configs/40x/acadia_defconfig
+++ b/arch/powerpc/configs/40x/acadia_defconfig
@@ -98,8 +98,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig
index 918f23fd2b18..9a5f1ab777ed 100644
--- a/arch/powerpc/configs/40x/ep405_defconfig
+++ b/arch/powerpc/configs/40x/ep405_defconfig
@@ -98,8 +98,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig
index f87ef0382280..0b452135d1d4 100644
--- a/arch/powerpc/configs/40x/hcu4_defconfig
+++ b/arch/powerpc/configs/40x/hcu4_defconfig
@@ -98,8 +98,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 19fbcb075376..4d2de0bed60e 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -98,8 +98,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig
index eb41cd695979..a1f3f505e4a7 100644
--- a/arch/powerpc/configs/40x/makalu_defconfig
+++ b/arch/powerpc/configs/40x/makalu_defconfig
@@ -98,8 +98,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig
index 416e79ac0711..c76313577140 100644
--- a/arch/powerpc/configs/40x/virtex_defconfig
+++ b/arch/powerpc/configs/40x/virtex_defconfig
@@ -77,8 +77,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig
index bfff0eae39d2..6597b2f1d1a8 100644
--- a/arch/powerpc/configs/40x/walnut_defconfig
+++ b/arch/powerpc/configs/40x/walnut_defconfig
@@ -98,8 +98,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig
index 1f6d0490e28d..2d3dfb55fbed 100644
--- a/arch/powerpc/configs/44x/arches_defconfig
+++ b/arch/powerpc/configs/44x/arches_defconfig
@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig
index 788faac6c27a..51a00c46df19 100644
--- a/arch/powerpc/configs/44x/bamboo_defconfig
+++ b/arch/powerpc/configs/44x/bamboo_defconfig
@@ -102,8 +102,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index 4ef8bcab61f8..1028b1bfb602 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig
index ca17b1496e32..69f5633cbd4f 100644
--- a/arch/powerpc/configs/44x/ebony_defconfig
+++ b/arch/powerpc/configs/44x/ebony_defconfig
@@ -101,8 +101,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/eiger_defconfig b/arch/powerpc/configs/44x/eiger_defconfig
index e3149bade0b2..dcd859c8b4a6 100644
--- a/arch/powerpc/configs/44x/eiger_defconfig
+++ b/arch/powerpc/configs/44x/eiger_defconfig
@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig
index af244e1d255e..a2c24d1e051e 100644
--- a/arch/powerpc/configs/44x/katmai_defconfig
+++ b/arch/powerpc/configs/44x/katmai_defconfig
@@ -97,8 +97,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig
index 8fed3b26af2e..3bb55b57077e 100644
--- a/arch/powerpc/configs/44x/rainier_defconfig
+++ b/arch/powerpc/configs/44x/rainier_defconfig
@@ -101,8 +101,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/redwood_defconfig b/arch/powerpc/configs/44x/redwood_defconfig
index a67ec91a28c3..684f40dc8a41 100644
--- a/arch/powerpc/configs/44x/redwood_defconfig
+++ b/arch/powerpc/configs/44x/redwood_defconfig
@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index 886cb6aa6432..e202924e6173 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -103,8 +103,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig
index 1b2f41dbcafb..c348a4662a9e 100644
--- a/arch/powerpc/configs/44x/sequoia_defconfig
+++ b/arch/powerpc/configs/44x/sequoia_defconfig
@@ -102,8 +102,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index 12041d355b8c..f4cb7e84cb83 100644
--- a/arch/powerpc/configs/44x/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
@@ -101,8 +101,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index 2518b8568c70..c7ead0ec00bc 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -80,8 +80,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 218d49b36a0c..7664c83c17c2 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -95,8 +95,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index 90492ff25232..eac7c17eef34 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -96,8 +96,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index dffc8cac825f..27afb6ecdf61 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -95,8 +95,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 3cb2a522046a..5fe39ddb4e14 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -98,8 +98,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 96181c62abfa..a108b84c0074 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -95,8 +95,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index 183c59c6d896..b728a7d64250 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -103,8 +103,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index 1524d948a2ba..8e738de5f6a5 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -103,8 +103,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 767c204c0603..59bf9e27d7f2 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -103,8 +103,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index 55b9e4e867ac..4e8b01e73245 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -98,8 +98,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 1be38eb05783..20fde6374aad 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -103,8 +103,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index a63009457323..74f714d85936 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -102,8 +102,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 9f89d5c9c0be..a670cee255b9 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -92,8 +92,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/amigaone_defconfig b/arch/powerpc/configs/amigaone_defconfig
index b63cc38df6b1..851287e78fc3 100644
--- a/arch/powerpc/configs/amigaone_defconfig
+++ b/arch/powerpc/configs/amigaone_defconfig
@@ -87,8 +87,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 4ab6074db3cf..b429a655b541 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -102,8 +102,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index c6d2baa7aaeb..943371954317 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -83,8 +83,7 @@ CONFIG_CPUSETS=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig
index d2123779512a..6be6c09eba6d 100644
--- a/arch/powerpc/configs/celleb_defconfig
+++ b/arch/powerpc/configs/celleb_defconfig
@@ -78,8 +78,7 @@ CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_USER_SCHED is not set
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 5094a65a4493..2fdab660fce3 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -77,8 +77,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 81e904e9f392..6b708395a7c6 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -96,8 +96,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index c5af46ef5f40..1cee889dd9ec 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -91,8 +91,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 826a65d3f002..57d3ffa3026a 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -82,8 +82,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/gamecube_defconfig b/arch/powerpc/configs/gamecube_defconfig
index 942e1193e9e4..1c2dbf07ac35 100644
--- a/arch/powerpc/configs/gamecube_defconfig
+++ b/arch/powerpc/configs/gamecube_defconfig
@@ -101,8 +101,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/holly_defconfig b/arch/powerpc/configs/holly_defconfig
index a211a79959ca..a60d61bee48d 100644
--- a/arch/powerpc/configs/holly_defconfig
+++ b/arch/powerpc/configs/holly_defconfig
@@ -73,7 +73,6 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 # CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 76982c51a4c7..151c8e14f3ab 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -81,8 +81,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 588a2add393f..8ecacf74d3e5 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -97,8 +97,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 8b244003b9e1..dc50eec58e78 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -78,8 +78,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 0cbd56fe2e1e..b36ebb7e843e 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -96,8 +96,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index c1be26151021..0dd5015ea81d 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -90,8 +90,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig
index a04727295d46..aa2654e6edeb 100644
--- a/arch/powerpc/configs/mpc512x_defconfig
+++ b/arch/powerpc/configs/mpc512x_defconfig
@@ -97,8 +97,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 7012ac0134f0..f875ec21c91c 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -97,8 +97,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 27c63ceeb45a..b1e88fe1d9fb 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -95,8 +95,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 20ba0cfff8ba..74a7216183e8 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=64
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index ea8870a34482..753bb7912e28 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -93,8 +93,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index 35b60683cde5..afb4d1bb2ba9 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -99,8 +99,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 46f5c47e9f85..bd3d23fb4dd3 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -103,8 +103,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index dad617e2a88c..369f4e02c5dd 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -93,8 +93,7 @@ CONFIG_CPUSETS=y
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index 8195f1650cbf..403e82e2e83c 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -107,8 +107,7 @@ CONFIG_CPUSETS=y
 CONFIG_PROC_PID_CPUSET=y
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index 68c175ea427a..12c8ee8dd12b 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -96,8 +96,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index 93f4505b5ac2..a18f597c6e5f 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 16a14589bd40..16ae717d1958 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -92,8 +92,7 @@ CONFIG_CPUSETS=y
 # CONFIG_GROUP_SCHED is not set
 CONFIG_CGROUP_CPUACCT=y
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index b1625801526e..01be0e207f40 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -95,8 +95,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/wii_defconfig b/arch/powerpc/configs/wii_defconfig
index c386828c639a..ee054f8118be 100644
--- a/arch/powerpc/configs/wii_defconfig
+++ b/arch/powerpc/configs/wii_defconfig
@@ -102,8 +102,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-- 
cgit v1.2.3


From b636f1379eefe6eba931deaa386605bc7ac623e7 Mon Sep 17 00:00:00 2001
From: Matt Evans <matt@ozlabs.org>
Date: Mon, 7 Jun 2010 21:38:18 +0000
Subject: powerpc/kexec: Wait for online/possible CPUs only.

kexec_perpare_cpus_wait() iterates i through NR_CPUS to check
paca[i].kexec_state of each to make sure they have quiesced.
However now we have dynamic PACA allocation, paca[NR_CPUS] is not necessarily
valid and we overrun the array;  spurious "cpu is not possible, ignoring"
errors result.  This patch iterates for_each_online_cpu so stays
within the bounds of paca[] -- and every CPU is now 'possible'.

Signed-off-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/machine_kexec_64.c | 18 +-----------------
 1 file changed, 1 insertion(+), 17 deletions(-)

diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 26f9900f773c..ed31a29c4ff7 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -182,28 +182,12 @@ static void kexec_prepare_cpus_wait(int wait_state)
 
 	my_cpu = get_cpu();
 	/* Make sure each CPU has atleast made it to the state we need */
-	for (i=0; i < NR_CPUS; i++) {
+	for_each_online_cpu(i) {
 		if (i == my_cpu)
 			continue;
 
 		while (paca[i].kexec_state < wait_state) {
 			barrier();
-			if (!cpu_possible(i)) {
-				printk("kexec: cpu %d hw_cpu_id %d is not"
-						" possible, ignoring\n",
-						i, paca[i].hw_cpu_id);
-				break;
-			}
-			if (!cpu_online(i)) {
-				/* Fixme: this can be spinning in
-				 * pSeries_secondary_wait with a paca
-				 * waiting for it to go online.
-				 */
-				printk("kexec: cpu %d hw_cpu_id %d is not"
-						" online, ignoring\n",
-						i, paca[i].hw_cpu_id);
-				break;
-			}
 			if (i != notified) {
 				printk( "kexec: waiting for cpu %d (physical"
 						" %d) to enter %i state\n",
-- 
cgit v1.2.3


From f1ba9a5b2ab7d3f5a910d93371c4f22b636b7683 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Wed, 2 Jun 2010 22:24:26 +0000
Subject: powerpc: Unconditionally enabled irq stacks

Irq stacks provide an essential protection from stack overflows through
external interrupts, at the cost of two additionals stacks per CPU.

Enable them unconditionally to simplify the kernel build and prevent
people from accidentally disabling them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Kconfig.debug     |  7 -------
 arch/powerpc/include/asm/irq.h |  6 ------
 arch/powerpc/kernel/irq.c      | 12 ------------
 arch/powerpc/kernel/misc_32.S  |  2 --
 arch/powerpc/kernel/misc_64.S  |  2 --
 arch/powerpc/kernel/process.c  |  5 -----
 arch/powerpc/kernel/setup_32.c |  4 ----
 arch/powerpc/kernel/setup_64.c |  4 ----
 8 files changed, 42 deletions(-)

diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 53696da4518f..2d38a50e66ba 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -135,13 +135,6 @@ config DEBUGGER
 	depends on KGDB || XMON
 	default y
 
-config IRQSTACKS
-	bool "Use separate kernel stacks when processing interrupts"
-	help
-	  If you say Y here the kernel will use separate kernel stacks
-	  for handling hard and soft interrupts.  This can help avoid
-	  overflowing the process kernel stacks.
-
 config VIRQ_DEBUG
 	bool "Expose hardware/virtual IRQ mapping via debugfs"
 	depends on DEBUG_FS
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index e054baef1845..ecba37a91749 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -358,7 +358,6 @@ extern void exc_lvl_ctx_init(void);
 #define exc_lvl_ctx_init()
 #endif
 
-#ifdef CONFIG_IRQSTACKS
 /*
  * Per-cpu stacks for handling hard and soft interrupts.
  */
@@ -369,11 +368,6 @@ extern void irq_ctx_init(void);
 extern void call_do_softirq(struct thread_info *tp);
 extern int call_handle_irq(int irq, void *p1,
 			   struct thread_info *tp, void *func);
-#else
-#define irq_ctx_init()
-
-#endif /* CONFIG_IRQSTACKS */
-
 extern void do_IRQ(struct pt_regs *regs);
 
 #endif /* _ASM_IRQ_H */
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 30817d9b20cb..3333bbdd23ef 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -317,7 +317,6 @@ void fixup_irqs(const struct cpumask *map)
 }
 #endif
 
-#ifdef CONFIG_IRQSTACKS
 static inline void handle_one_irq(unsigned int irq)
 {
 	struct thread_info *curtp, *irqtp;
@@ -358,12 +357,6 @@ static inline void handle_one_irq(unsigned int irq)
 	if (irqtp->flags)
 		set_bits(irqtp->flags, &curtp->flags);
 }
-#else
-static inline void handle_one_irq(unsigned int irq)
-{
-	generic_handle_irq(irq);
-}
-#endif
 
 static inline void check_stack_overflow(void)
 {
@@ -455,7 +448,6 @@ void exc_lvl_ctx_init(void)
 }
 #endif
 
-#ifdef CONFIG_IRQSTACKS
 struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
 struct thread_info *hardirq_ctx[NR_CPUS] __read_mostly;
 
@@ -492,10 +484,6 @@ static inline void do_softirq_onstack(void)
 	irqtp->task = NULL;
 }
 
-#else
-#define do_softirq_onstack()	__do_softirq()
-#endif /* CONFIG_IRQSTACKS */
-
 void do_softirq(void)
 {
 	unsigned long flags;
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index dc66d52dcff5..6bbd7a604d24 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -33,7 +33,6 @@
 
 	.text
 
-#ifdef CONFIG_IRQSTACKS
 _GLOBAL(call_do_softirq)
 	mflr	r0
 	stw	r0,4(r1)
@@ -56,7 +55,6 @@ _GLOBAL(call_handle_irq)
 	lwz	r0,4(r1)
 	mtlr	r0
 	blr
-#endif /* CONFIG_IRQSTACKS */
 
 /*
  * This returns the high 64 bits of the product of two 64-bit numbers.
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index a2b18dffa03e..e5144906a56d 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -28,7 +28,6 @@
 
 	.text
 
-#ifdef CONFIG_IRQSTACKS
 _GLOBAL(call_do_softirq)
 	mflr	r0
 	std	r0,16(r1)
@@ -52,7 +51,6 @@ _GLOBAL(call_handle_irq)
 	ld	r0,16(r1)
 	mtlr	r0
 	blr
-#endif /* CONFIG_IRQSTACKS */
 
 	.section	".toc","aw"
 PPC64_CACHES:
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 9d255b4f0a0e..773424df828a 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1005,7 +1005,6 @@ out:
 	return error;
 }
 
-#ifdef CONFIG_IRQSTACKS
 static inline int valid_irq_stack(unsigned long sp, struct task_struct *p,
 				  unsigned long nbytes)
 {
@@ -1030,10 +1029,6 @@ static inline int valid_irq_stack(unsigned long sp, struct task_struct *p,
 	return 0;
 }
 
-#else
-#define valid_irq_stack(sp, p, nb)	0
-#endif /* CONFIG_IRQSTACKS */
-
 int validate_sp(unsigned long sp, struct task_struct *p,
 		       unsigned long nbytes)
 {
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 8f58986c2ad9..7d84b210f168 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -241,7 +241,6 @@ int __init ppc_init(void)
 
 arch_initcall(ppc_init);
 
-#ifdef CONFIG_IRQSTACKS
 static void __init irqstack_early_init(void)
 {
 	unsigned int i;
@@ -255,9 +254,6 @@ static void __init irqstack_early_init(void)
 			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
 	}
 }
-#else
-#define irqstack_early_init()
-#endif
 
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
 static void __init exc_lvl_early_init(void)
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index f3fb5a79de52..643dcac40fcb 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -432,7 +432,6 @@ static u64 slb0_limit(void)
 	return 1UL << SID_SHIFT;
 }
 
-#ifdef CONFIG_IRQSTACKS
 static void __init irqstack_early_init(void)
 {
 	u64 limit = slb0_limit();
@@ -451,9 +450,6 @@ static void __init irqstack_early_init(void)
 					    THREAD_SIZE, limit));
 	}
 }
-#else
-#define irqstack_early_init()
-#endif
 
 #ifdef CONFIG_PPC_BOOK3E
 static void __init exc_lvl_early_init(void)
-- 
cgit v1.2.3


From bd2b64a12bf55bec0d1b949e3dca3f8863409646 Mon Sep 17 00:00:00 2001
From: Milton Miller <miltonm@us.ibm.com>
Date: Sat, 12 Jun 2010 03:48:47 +0000
Subject: powerpc: rtas_flash needs to use rtas_data_buf

When trying to flash a machine via the update_flash command, Anton received the
following error:

    Restarting system.
    FLASH: kernel bug...flash list header addr above 4GB

The code in question has a comment that the flash list should be in
the kernel data and therefore under 4GB:

        /* NOTE: the "first" block list is a global var with no data
         * blocks in the kernel data segment.  We do this because
         * we want to ensure this block_list addr is under 4GB.
         */

Unfortunately the Kconfig option is marked tristate which means the variable
may not be in the kernel data and could be above 4GB.

Instead of relying on the data segment being below 4GB, use the static
data buffer allocated by the kernel for use by rtas.  Since we don't
use the header struct directly anymore, convert it to a simple pointer.

Reported-By: Anton Blanchard <anton@samba.org>
Signed-Off-By: Milton Miller <miltonm@bga.com
Tested-By: Anton Blanchard <anton@samba.org>

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/rtas_flash.c | 39 +++++++++++++++++++++------------------
 1 file changed, 21 insertions(+), 18 deletions(-)

diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index bfc2abafac44..67a84d8f118d 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -94,12 +94,8 @@ struct flash_block_list {
 	struct flash_block_list *next;
 	struct flash_block blocks[FLASH_BLOCKS_PER_NODE];
 };
-struct flash_block_list_header { /* just the header of flash_block_list */
-	unsigned long num_blocks;
-	struct flash_block_list *next;
-};
 
-static struct flash_block_list_header rtas_firmware_flash_list = {0, NULL};
+static struct flash_block_list *rtas_firmware_flash_list;
 
 /* Use slab cache to guarantee 4k alignment */
 static struct kmem_cache *flash_block_cache = NULL;
@@ -108,13 +104,14 @@ static struct kmem_cache *flash_block_cache = NULL;
 
 /* Local copy of the flash block list.
  * We only allow one open of the flash proc file and create this
- * list as we go.  This list will be put in the
- * rtas_firmware_flash_list var once it is fully read.
+ * list as we go.  The rtas_firmware_flash_list varable will be
+ * set once the data is fully read.
  *
  * For convenience as we build the list we use virtual addrs,
  * we do not fill in the version number, and the length field
  * is treated as the number of entries currently in the block
- * (i.e. not a byte count).  This is all fixed on release.
+ * (i.e. not a byte count).  This is all fixed when calling 
+ * the flash routine.
  */
 
 /* Status int must be first member of struct */
@@ -201,16 +198,16 @@ static int rtas_flash_release(struct inode *inode, struct file *file)
 	if (uf->flist) {    
 		/* File was opened in write mode for a new flash attempt */
 		/* Clear saved list */
-		if (rtas_firmware_flash_list.next) {
-			free_flash_list(rtas_firmware_flash_list.next);
-			rtas_firmware_flash_list.next = NULL;
+		if (rtas_firmware_flash_list) {
+			free_flash_list(rtas_firmware_flash_list);
+			rtas_firmware_flash_list = NULL;
 		}
 
 		if (uf->status != FLASH_AUTH)  
 			uf->status = flash_list_valid(uf->flist);
 
 		if (uf->status == FLASH_IMG_READY) 
-			rtas_firmware_flash_list.next = uf->flist;
+			rtas_firmware_flash_list = uf->flist;
 		else
 			free_flash_list(uf->flist);
 
@@ -593,7 +590,7 @@ static void rtas_flash_firmware(int reboot_type)
 	unsigned long rtas_block_list;
 	int i, status, update_token;
 
-	if (rtas_firmware_flash_list.next == NULL)
+	if (rtas_firmware_flash_list == NULL)
 		return;		/* nothing to do */
 
 	if (reboot_type != SYS_RESTART) {
@@ -610,20 +607,25 @@ static void rtas_flash_firmware(int reboot_type)
 		return;
 	}
 
-	/* NOTE: the "first" block list is a global var with no data
-	 * blocks in the kernel data segment.  We do this because
-	 * we want to ensure this block_list addr is under 4GB.
+	/*
+	 * NOTE: the "first" block must be under 4GB, so we create
+	 * an entry with no data blocks in the reserved buffer in
+	 * the kernel data segment.
 	 */
-	rtas_firmware_flash_list.num_blocks = 0;
-	flist = (struct flash_block_list *)&rtas_firmware_flash_list;
+	spin_lock(&rtas_data_buf_lock);
+	flist = (struct flash_block_list *)&rtas_data_buf[0];
+	flist->num_blocks = 0;
+	flist->next = rtas_firmware_flash_list;
 	rtas_block_list = virt_to_abs(flist);
 	if (rtas_block_list >= 4UL*1024*1024*1024) {
 		printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
+		spin_unlock(&rtas_data_buf_lock);
 		return;
 	}
 
 	printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n");
 	/* Update the block_list in place. */
+	rtas_firmware_flash_list = NULL; /* too hard to backout on error */
 	image_size = 0;
 	for (f = flist; f; f = next) {
 		/* Translate data addrs to absolute */
@@ -664,6 +666,7 @@ static void rtas_flash_firmware(int reboot_type)
 		printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status);
 		break;
 	}
+	spin_unlock(&rtas_data_buf_lock);
 }
 
 static void remove_flash_pde(struct proc_dir_entry *dp)
-- 
cgit v1.2.3


From 7c9d93604b25c25dc059e2b12ad5e89ca3ed4376 Mon Sep 17 00:00:00 2001
From: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Date: Sat, 12 Jun 2010 15:36:48 +0000
Subject: powerpc: Fix mpic_resume on early G5 macs

mpic_resume() on G5 macs blindly dereferences mpic->fixups, but
it may legitimately be NULL (as on PowerMac7,2).  Add an explicit
check.

This fixes suspend-to-disk with one processor (maxcpus=1) for me.

Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/mpic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 2102487612a4..20b73c025a45 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1666,7 +1666,7 @@ static int mpic_resume(struct sys_device *dev)
 			       mpic->save_data[i].dest);
 
 #ifdef CONFIG_MPIC_U3_HT_IRQS
-	{
+	if (mpic->fixups) {
 		struct mpic_irq_fixup *fixup = &mpic->fixups[i];
 
 		if (fixup->base) {
-- 
cgit v1.2.3


From 3bbf9b9b0fe74b5149d922a5d893be6954b61198 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Tue, 8 Jun 2010 07:48:29 -0600
Subject: maintainers: Add git trees for SPI and device tree

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 MAINTAINERS | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 6d119c98b89b..2a9145016881 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4212,6 +4212,7 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE
 M:	Grant Likely <grant.likely@secretlab.ca>
 L:	devicetree-discuss@lists.ozlabs.org
 W:	http://fdt.secretlab.ca
+T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 F:	drivers/of
 F:	include/linux/of*.h
@@ -5384,6 +5385,7 @@ M:	David Brownell <dbrownell@users.sourceforge.net>
 M:	Grant Likely <grant.likely@secretlab.ca>
 L:	spi-devel-general@lists.sourceforge.net
 Q:	http://patchwork.kernel.org/project/spi-devel-general/list/
+T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 F:	Documentation/spi/
 F:	drivers/spi/
-- 
cgit v1.2.3


From a2c9a603c72be0d9a0780f196bff53ab0d517347 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Fri, 11 Jun 2010 01:52:34 +0000
Subject: powerpc/5200: add lite5200 onboard I2C eeprom and flash

Add dts descriptions for onboard 256 byte I2C eeprom (pcf8582C-2)
and 16MB NOR flash (am29lv652d).

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
[grant.likely@secretlab.ca: added lite5200b eeprom and declared lite5200 gpios]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/boot/dts/lite5200.dts  | 24 ++++++++++++++++++++++++
 arch/powerpc/boot/dts/lite5200b.dts |  5 +++++
 2 files changed, 29 insertions(+)

diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 82ff2b13bc37..d1502ef85edb 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -134,12 +134,16 @@
 			compatible = "fsl,mpc5200-gpio";
 			reg = <0xb00 0x40>;
 			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		gpio@c00 {
 			compatible = "fsl,mpc5200-gpio-wkup";
 			reg = <0xc00 0x40>;
 			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		spi@f00 {
@@ -255,7 +259,13 @@
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
 		};
+
 		sram@8000 {
 			compatible = "fsl,mpc5200-sram";
 			reg = <0x8000 0x4000>;
@@ -281,4 +291,18 @@
 			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
+
+	localbus {
+		compatible = "fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xff000000 0x01000000>;
+
+		flash@0,0 {
+			compatible = "amd,am29lv652d", "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <1>;
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index e45a63be3a86..59702ace900f 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -259,6 +259,11 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
 		};
 
 		sram@8000 {
-- 
cgit v1.2.3


From 256a8042830e6ac1c3dd2e912e3c45769dd709cc Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Mon, 17 May 2010 03:20:13 +0200
Subject: OMAPFB: LCDC: change update_mode to DISABLED when going suspend

I was observing the following error messages on my OMAP1 based Amstrad Delta
board when first changing from text to graphics mode or vice versa after the
LCD display had been blanked:
	omapfb omapfb: timeout waiting for FRAME DONE
with a followup error message while unblanking it back:
	omapfb omapfb: resetting (status 0xffffffb2,reset count 1)
As a visible result, image pixels happened to be shifted by a few bits,
giving wrong colors.

Examining the code, I found that this problem occures when an OMAP1 internal
LCD controller is disabled from omap_lcdc_suspend() and then a subsequent
omap_lcdc_setup_plane() calls disable_controller() again. This potentially
error provoking behaviour is triggered by the lcdc.update_mode flag being kept
at OMAP_AUTO_UPDATE, regardless of the controller and panel being suspended.

This patch tries to correct the problem by replacing both omap_lcdc_suspend()
and omap_lcdc_resume() function bodies with single calls to
omap_lcdc_set_update_mode() with a respective OMAP_UPDATE_DISABLE or
OMAP_AUTO_UPDATE argument. As a result, exactly the same lower level
operations are performed, with addition of changing the lcdc.update_mode flag
to a value better suited for the controller state. This prevents any further
calls to disable_controller() from omap_lcdc_setup_plane() while the display
is suspended.

Created against linux-2.6.34-rc7.
Tested on Amstrad Delta.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
---
 drivers/video/omap/lcdc.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index 43ab7d8b66b2..7767338f8b14 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -572,22 +572,12 @@ static enum omapfb_update_mode omap_lcdc_get_update_mode(void)
 /* PM code called only in internal controller mode */
 static void omap_lcdc_suspend(void)
 {
-	if (lcdc.update_mode == OMAPFB_AUTO_UPDATE) {
-		disable_controller();
-		omap_stop_lcd_dma();
-	}
+	omap_lcdc_set_update_mode(OMAPFB_UPDATE_DISABLED);
 }
 
 static void omap_lcdc_resume(void)
 {
-	if (lcdc.update_mode == OMAPFB_AUTO_UPDATE) {
-		setup_regs();
-		load_palette();
-		setup_lcd_dma();
-		set_load_mode(OMAP_LCDC_LOAD_FRAME);
-		enable_irqs(OMAP_LCDC_IRQ_DONE);
-		enable_controller();
-	}
+	omap_lcdc_set_update_mode(OMAPFB_AUTO_UPDATE);
 }
 
 static void omap_lcdc_get_caps(int plane, struct omapfb_caps *caps)
-- 
cgit v1.2.3


From bc092a303a1b980c67324920471e23354b0721cd Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Date: Mon, 7 Jun 2010 10:46:10 +0300
Subject: OMAP: OMAPFB: fix rfbi.c compile error

The code in rfbi.c tried to get the omapdss platform_device via a static
member defined in dispc.c, leading to a compile error. The same
platform_device is available through rfbi-struct.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
---
 drivers/video/omap/rfbi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
index 1162603c72e5..eada9f12efc7 100644
--- a/drivers/video/omap/rfbi.c
+++ b/drivers/video/omap/rfbi.c
@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
 
 #include "omapfb.h"
 #include "dispc.h"
@@ -83,13 +84,13 @@ static inline u32 rfbi_read_reg(int idx)
 
 static int rfbi_get_clocks(void)
 {
-	rfbi.dss_ick = clk_get(&dispc.fbdev->dssdev->dev, "ick");
+	rfbi.dss_ick = clk_get(&rfbi.fbdev->dssdev->dev, "ick");
 	if (IS_ERR(rfbi.dss_ick)) {
 		dev_err(rfbi.fbdev->dev, "can't get ick\n");
 		return PTR_ERR(rfbi.dss_ick);
 	}
 
-	rfbi.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss1_fck");
+	rfbi.dss1_fck = clk_get(&rfbi.fbdev->dssdev->dev, "dss1_fck");
 	if (IS_ERR(rfbi.dss1_fck)) {
 		dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
 		clk_put(rfbi.dss_ick);
-- 
cgit v1.2.3


From 25cbff1660d3f4c059a178a1e5b851be6d70c5e8 Mon Sep 17 00:00:00 2001
From: Sheng Yang <sheng@linux.intel.com>
Date: Sat, 12 Jun 2010 19:21:42 +0800
Subject: intel-iommu: Fix reference by physical address in
 intel_iommu_attach_device()

Commit a99c47a2 "intel-iommu: errors with smaller iommu widths" replace the
dmar_domain->pgd with the first entry of page table when iommu's supported
width is smaller than dmar_domain's. But it use physical address directly
for new dmar_domain->pgd...

This result in KVM oops with VT-d on some machines.

Reported-by: Allen Kay <allen.m.kay@intel.com>
Cc: Tom Lyon <pugs@cisco.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/pci/intel-iommu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 796828fce34c..3bd30557ce2e 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -3603,7 +3603,8 @@ static int intel_iommu_attach_device(struct iommu_domain *domain,
 		pte = dmar_domain->pgd;
 		if (dma_pte_present(pte)) {
 			free_pgtable_page(dmar_domain->pgd);
-			dmar_domain->pgd = (struct dma_pte *)dma_pte_addr(pte);
+			dmar_domain->pgd = (struct dma_pte *)
+				phys_to_virt(dma_pte_addr(pte));
 		}
 		dmar_domain->agaw--;
 	}
-- 
cgit v1.2.3


From 00dfff77e7184140dc45724c7232e99302f6bf97 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Mon, 14 Jun 2010 17:17:32 +0200
Subject: intel-iommu: Fix double lock in get_domain_for_dev()

stanse found the following double lock.

In get_domain_for_dev:
  spin_lock_irqsave(&device_domain_lock, flags);
  domain_exit(domain);
    domain_remove_dev_info(domain);
      spin_lock_irqsave(&device_domain_lock, flags);
      spin_unlock_irqrestore(&device_domain_lock, flags);
  spin_unlock_irqrestore(&device_domain_lock, flags);

This happens when the domain is created by another CPU at the same time
as this function is creating one, and the other CPU wins the race to
attach it to the device in question, so we have to destroy our own
newly-created one.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/pci/intel-iommu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 3bd30557ce2e..bf8fd913d064 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -1874,14 +1874,15 @@ static struct dmar_domain *get_domain_for_dev(struct pci_dev *pdev, int gaw)
 			}
 		}
 		if (found) {
+			spin_unlock_irqrestore(&device_domain_lock, flags);
 			free_devinfo_mem(info);
 			domain_exit(domain);
 			domain = found;
 		} else {
 			list_add(&info->link, &domain->devices);
 			list_add(&info->global, &device_domain_list);
+			spin_unlock_irqrestore(&device_domain_lock, flags);
 		}
-		spin_unlock_irqrestore(&device_domain_lock, flags);
 	}
 
 found_domain:
-- 
cgit v1.2.3


From 2d9e667efdfb4e986074d98e7d9a424003c7c43b Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Tue, 15 Jun 2010 10:57:57 +0100
Subject: intel-iommu: Force-disable IOMMU for iGFX on broken Cantiga
 revisions.

Certain revisions of this chipset appear to be broken. There is a shadow
GTT which mirrors the real GTT but contains pre-translated physical
addresses, for performance reasons. When a GTT update happens, the
translations are done once and the resulting physical addresses written
back to the shadow GTT.

Except sometimes, the physical address is actually written back to the
_real_ GTT, not the shadow GTT. Thus we start to see faults when that
physical address is fed through translation again.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/pci/intel-iommu.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index bf8fd913d064..c9171be74564 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -340,7 +340,7 @@ int dmar_disabled = 0;
 int dmar_disabled = 1;
 #endif /*CONFIG_DMAR_DEFAULT_ON*/
 
-static int __initdata dmar_map_gfx = 1;
+static int dmar_map_gfx = 1;
 static int dmar_forcedac;
 static int intel_iommu_strict;
 
@@ -3721,6 +3721,12 @@ static void __devinit quirk_iommu_rwbf(struct pci_dev *dev)
 	 */
 	printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n");
 	rwbf_quirk = 1;
+
+	/* https://bugzilla.redhat.com/show_bug.cgi?id=538163 */
+	if (dev->revision == 0x07) {
+		printk(KERN_INFO "DMAR: Disabling IOMMU for graphics on this chipset\n");
+		dmar_map_gfx = 0;
+	}
 }
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
-- 
cgit v1.2.3


From d5eda75f3a6a08f5a3644764a88d288e62e7823d Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@canonical.com>
Date: Mon, 14 Jun 2010 10:41:10 +0100
Subject: kbuild: fix LOCALVERSION handling to match description

In the commit below the version string handling was modified, adding
a '+' where no other version information was supplied:

    commit 85a256d8e0116c8f5ad276730830f5d4d473344d
    Author: David Rientjes <rientjes@google.com>
    Date:   Wed Jan 13 13:01:05 2010 -0800

From the commit the intent was as below:

     - when CONFIG_LOCALVERSION_AUTO is disabled, a `+' is appended if the
       repository has been revised beyond a tagged commit and LOCALVERSION=
       was not passed to "make".

However if the user supplies an empty LOCALVERSION on the command line
the plus suffix is still added.  This form is useful in the case where
the build environment knows that the version as specified is correct and
complete but does not correspond to a specific tag.

This patch changes the implementation to match the documentation
such that specifying LOCALVERSION= on the build line is sufficient
to suppress any suffix.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 993d1f335925..324130c682dd 100644
--- a/Makefile
+++ b/Makefile
@@ -944,7 +944,7 @@ ifdef CONFIG_LOCALVERSION_AUTO
 	localver-extra = $(scm-identifier)
 else
 	ifneq ($(scm-identifier),)
-		ifeq ($(LOCALVERSION),)
+		ifeq ("$(origin LOCALVERSION)", "undefined")
 			localver-extra = +
 		endif
 	endif
-- 
cgit v1.2.3


From 5b61ea499727f22ebdaaeedb9801b12ed6eb59c7 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Fri, 11 Jun 2010 19:24:51 +0530
Subject: ASoC: DaVinci: Fix McASP hardware FIFO configuration

On DA830/OMAP-L137 and DA850/OMAP-L138 SoCs, the McASP peripheral
has FIFO support. This FIFO provides additional data buffering. It
also provides tolerance to variation in host/DMA controller response
times. More details of the FIFO operation can be found at

http://focus.ti.com/general/docs/lit/getliterature.tsp?literatureNumber=sprufm1&fileType=pdf

Existing sequence of steps for audio playback/capture are:
a. DMA configuration
b. McASP configuration (configures and enables FIFO)
c. Start DMA
d. Start McASP (enables FIFO)

During McASP configuration, while FIFO was being configured, FIFO
was being enabled in davinci_hw_common_param() function of
sound/soc/davinci/davinci-mcasp.c file. This generated a transmit
DMA event, which gets serviced when DMA is started.

https://patchwork.kernel.org/patch/84611/ patch clears the DMA
events before starting DMA, which is the right thing to do. But
this resulted in a state where DMA was waiting for an event from
McASP (after step c above), but the event which was already there,
has got cleared (because of step b above).

The fix is not to enable the FIFO during McASP configuration as
FIFO was being enabled as part of McASP start.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/davinci/davinci-mcasp.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index 79f0f4ad242c..d3955096d872 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -612,7 +612,6 @@ static void davinci_hw_common_param(struct davinci_audio_dev *dev, int stream)
 								NUMDMA_MASK);
 		mcasp_mod_bits(dev->base + DAVINCI_MCASP_WFIFOCTL,
 				((dev->txnumevt * tx_ser) << 8), NUMEVT_MASK);
-		mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE);
 	}
 
 	if (dev->rxnumevt && stream == SNDRV_PCM_STREAM_CAPTURE) {
@@ -623,7 +622,6 @@ static void davinci_hw_common_param(struct davinci_audio_dev *dev, int stream)
 								NUMDMA_MASK);
 		mcasp_mod_bits(dev->base + DAVINCI_MCASP_RFIFOCTL,
 				((dev->rxnumevt * rx_ser) << 8), NUMEVT_MASK);
-		mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE);
 	}
 }
 
-- 
cgit v1.2.3


From a69b03e941abae00380fc6bc1877fb797a1b31e6 Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Mon, 14 Jun 2010 14:30:25 -0400
Subject: iwlwifi: cancel scan watchdog in iwl_bg_abort_scan

Avoids this:

WARNING: at net/mac80211/scan.c:312 ieee80211_scan_completed+0x5f/0x1f1
[mac80211]()
Hardware name: Latitude E5400
Modules linked in: aes_x86_64 aes_generic fuse ipt_MASQUERADE iptable_nat
nf_nat rfcomm sco bridge stp llc bnep l2cap sunrpc cpufreq_ondemand
acpi_cpufreq freq_table xt_physdev ip6t_REJECT nf_conntrack_ipv6
ip6table_filter ip6_tables ipv6 kvm_intel kvm uinput arc4 ecb
snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel iwlagn snd_hda_codec
snd_hwdep snd_seq snd_seq_device iwlcore snd_pcm dell_wmi sdhci_pci sdhci
iTCO_wdt tg3 dell_laptop mmc_core i2c_i801 wmi mac80211 snd_timer
iTCO_vendor_support btusb joydev dcdbas cfg80211 bluetooth snd soundcore
microcode rfkill snd_page_alloc firewire_ohci firewire_core crc_itu_t
yenta_socket rsrc_nonstatic i915 drm_kms_helper drm i2c_algo_bit i2c_core video
output [last unloaded: scsi_wait_scan]
Pid: 979, comm: iwlagn Tainted: G        W  2.6.33.3-85.fc13.x86_64 #1
Call Trace:
[<ffffffff8104b558>] warn_slowpath_common+0x77/0x8f
[<ffffffff8104b57f>] warn_slowpath_null+0xf/0x11
[<ffffffffa01bb7d9>] ieee80211_scan_completed+0x5f/0x1f1 [mac80211]
[<ffffffffa02a23f0>] iwl_bg_scan_completed+0xbb/0x17a [iwlcore]
[<ffffffff81060d3d>] worker_thread+0x1a4/0x232
[<ffffffffa02a2335>] ? iwl_bg_scan_completed+0x0/0x17a [iwlcore]
[<ffffffff81064817>] ? autoremove_wake_function+0x0/0x34
[<ffffffff81060b99>] ? worker_thread+0x0/0x232
[<ffffffff810643c7>] kthread+0x7a/0x82
[<ffffffff8100a924>] kernel_thread_helper+0x4/0x10
[<ffffffff8106434d>] ? kthread+0x0/0x82
[<ffffffff8100a920>] ? kernel_thread_helper+0x0/0x10

Reported here:

	https://bugzilla.redhat.com/show_bug.cgi?id=590436

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Reported-by: Mihai Harpau <mishu@piatafinanciara.ro>
Cc: stable@kernel.org
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-scan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 5d3f51ff2f0d..386c5f96eff8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -491,6 +491,7 @@ void iwl_bg_abort_scan(struct work_struct *work)
 
 	mutex_lock(&priv->mutex);
 
+	cancel_delayed_work_sync(&priv->scan_check);
 	set_bit(STATUS_SCAN_ABORTING, &priv->status);
 	iwl_send_scan_abort(priv);
 
-- 
cgit v1.2.3


From 87a9d57da41e70dc85adf23e158308527c051b3a Mon Sep 17 00:00:00 2001
From: Matt Turner <mattst88@gmail.com>
Date: Sun, 6 Jun 2010 20:06:40 -0400
Subject: alpha: fix __arch_hweight32 typo

Typo in 1527bc8b928dd1399c3d3467dd47d9ede210978a renamed hweight32 to
__arch_weight32.

Signed-off-by: Matt Turner <mattst88@gmail.com>
---
 arch/alpha/include/asm/bitops.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/alpha/include/asm/bitops.h b/arch/alpha/include/asm/bitops.h
index 1dce24bc455a..adfab8a21dfe 100644
--- a/arch/alpha/include/asm/bitops.h
+++ b/arch/alpha/include/asm/bitops.h
@@ -410,7 +410,7 @@ static inline unsigned long __arch_hweight64(unsigned long w)
 	return __kernel_ctpop(w);
 }
 
-static inline unsigned int __arch_weight32(unsigned int w)
+static inline unsigned int __arch_hweight32(unsigned int w)
 {
 	return __arch_hweight64(w);
 }
-- 
cgit v1.2.3


From 5efa16ff77cb785647a480dcdc70a6b4fc787996 Mon Sep 17 00:00:00 2001
From: Matt Turner <mattst88@gmail.com>
Date: Tue, 15 Jun 2010 13:19:36 -0400
Subject: alpha: fix pci_mmap_resource API breakage

Caused by 2c3c8bea608866d8bd9dcf92657d57fdcac011c5 which was clearly not
even compile tested.

Signed-off-by: Matt Turner <mattst88@gmail.com>
---
 arch/alpha/kernel/pci-sysfs.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c
index a5fffc882c72..738fc824e2ea 100644
--- a/arch/alpha/kernel/pci-sysfs.c
+++ b/arch/alpha/kernel/pci-sysfs.c
@@ -53,7 +53,6 @@ static int __pci_mmap_fits(struct pci_dev *pdev, int num,
 
 /**
  * pci_mmap_resource - map a PCI resource into user memory space
- * @filp: open sysfs file
  * @kobj: kobject for mapping
  * @attr: struct bin_attribute for the file being mapped
  * @vma: struct vm_area_struct passed into the mmap
@@ -61,7 +60,7 @@ static int __pci_mmap_fits(struct pci_dev *pdev, int num,
  *
  * Use the bus mapping routines to map a PCI resource into userspace.
  */
-static int pci_mmap_resource(struct file *filp, struct kobject *kobj,
+static int pci_mmap_resource(struct kobject *kobj,
 			     struct bin_attribute *attr,
 			     struct vm_area_struct *vma, int sparse)
 {
-- 
cgit v1.2.3


From 932e0c201d28a728e25d3b641aa95bd28ceb08b4 Mon Sep 17 00:00:00 2001
From: "Morten H. Larsen" <m-larsen@post6.tele.dk>
Date: Tue, 15 Jun 2010 13:22:11 -0400
Subject: alpha: Detect Super IO chip, no IDE on Avanti, enable EPP19

This patch probes for the Super IO chip and reserves the IO range when
found. It avoids enabling the IDE interface on the Avanti family, since
none has IDE. It enables the Enhanced Parallel Port v1.9 feature.

Signed-off-by: Morten H. Larsen <m-larsen@post6.tele.dk>
Signed-off-by: Matt Turner <mattst88@gmail.com>
---
 arch/alpha/kernel/Makefile  | 20 +++++------
 arch/alpha/kernel/ns87312.c | 38 --------------------
 arch/alpha/kernel/pc873xx.c | 88 +++++++++++++++++++++++++++++++++++++++++++++
 arch/alpha/kernel/pc873xx.h | 35 ++++++++++++++++++
 arch/alpha/kernel/sys_sio.c | 23 +++++++++++-
 5 files changed, 155 insertions(+), 49 deletions(-)
 delete mode 100644 arch/alpha/kernel/ns87312.c
 create mode 100644 arch/alpha/kernel/pc873xx.c
 create mode 100644 arch/alpha/kernel/pc873xx.h

diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index 7739a62440a7..5a62fb46ef20 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -35,7 +35,7 @@ endif
 
 obj-y	 += irq_pyxis.o irq_i8259.o irq_srm.o
 obj-y	 += err_ev6.o
-obj-y	 += es1888.o smc37c669.o smc37c93x.o ns87312.o gct.o
+obj-y	 += es1888.o smc37c669.o smc37c93x.o pc873xx.o gct.o
 obj-y    += srmcons.o
 
 else
@@ -63,11 +63,11 @@ obj-$(CONFIG_ALPHA_WILDFIRE)	+= core_wildfire.o
 # Board support
 obj-$(CONFIG_ALPHA_ALCOR)	+= sys_alcor.o irq_i8259.o irq_srm.o
 obj-$(CONFIG_ALPHA_CABRIOLET)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_EB164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_EB66P)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_LX164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
 				   smc37c93x.o
 obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
@@ -90,14 +90,14 @@ obj-$(CONFIG_ALPHA_RUFFIAN)	+= sys_ruffian.o irq_pyxis.o irq_i8259.o
 obj-$(CONFIG_ALPHA_RX164)	+= sys_rx164.o irq_i8259.o
 obj-$(CONFIG_ALPHA_SABLE)	+= sys_sable.o
 obj-$(CONFIG_ALPHA_LYNX)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
+obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
 obj-$(CONFIG_ALPHA_SX164)	+= sys_sx164.o irq_pyxis.o irq_i8259.o \
 				   irq_srm.o smc37c669.o
-obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o ns87312.o
+obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o pc873xx.o
 obj-$(CONFIG_ALPHA_WILDFIRE)	+= sys_wildfire.o irq_i8259.o
 
 # Error support
diff --git a/arch/alpha/kernel/ns87312.c b/arch/alpha/kernel/ns87312.c
deleted file mode 100644
index 342b56d24c20..000000000000
--- a/arch/alpha/kernel/ns87312.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/ns87312.c
- */
-
-#include <linux/init.h>
-#include <asm/io.h>
-#include "proto.h"
-
-
-/*
- * The SRM console *disables* the IDE interface, this code ensures it's
- * enabled.
- *
- * This code bangs on a control register of the 87312 Super I/O chip
- * that implements parallel port/serial ports/IDE/FDI.  Depending on
- * the motherboard, the Super I/O chip can be configured through a
- * pair of registers that are located either at I/O ports 0x26e/0x26f
- * or 0x398/0x399.  Unfortunately, autodetecting which base address is
- * in use works only once (right after a reset).  The Super I/O chip
- * has the additional quirk that configuration register data must be
- * written twice (I believe this is a safety feature to prevent
- * accidental modification---fun, isn't it?).
- */
-
-void __init
-ns87312_enable_ide(long ide_base)
-{
-	int data;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	outb(0, ide_base);		/* set the index register for reg #0 */
-	data = inb(ide_base+1);		/* read the current contents */
-	outb(0, ide_base);		/* set the index register for reg #0 */
-	outb(data | 0x40, ide_base+1);	/* turn on IDE */
-	outb(data | 0x40, ide_base+1);	/* turn on IDE, really! */
-	local_irq_restore(flags);
-}
diff --git a/arch/alpha/kernel/pc873xx.c b/arch/alpha/kernel/pc873xx.c
new file mode 100644
index 000000000000..27dcbff85613
--- /dev/null
+++ b/arch/alpha/kernel/pc873xx.c
@@ -0,0 +1,88 @@
+#include <linux/ioport.h>
+#include <asm/io.h>
+
+#include "pc873xx.h"
+
+static unsigned pc873xx_probelist[] = {0x398, 0x26e, 0};
+
+static char *pc873xx_names[] = {
+	"PC87303", "PC87306", "PC87312", "PC87332", "PC87334"
+};
+
+static unsigned int base, model;
+
+
+unsigned int __init pc873xx_get_base()
+{
+	return base;
+}
+
+char *__init pc873xx_get_model()
+{
+	return pc873xx_names[model];
+}
+
+static unsigned char __init pc873xx_read(unsigned int base, int reg)
+{
+	outb(reg, base);
+	return inb(base + 1);
+}
+
+static void __init pc873xx_write(unsigned int base, int reg, unsigned char data)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	outb(reg, base);
+	outb(data, base + 1);
+	outb(data, base + 1);		/* Must be written twice */
+	local_irq_restore(flags);
+}
+
+int __init pc873xx_probe(void)
+{
+	int val, index = 0;
+
+	while ((base = pc873xx_probelist[index++])) {
+
+		if (request_region(base, 2, "Super IO PC873xx") == NULL)
+			continue;
+
+		val = pc873xx_read(base, REG_SID);
+		if ((val & 0xf0) == 0x10) {
+			model = PC87332;
+			break;
+		} else if ((val & 0xf8) == 0x70) {
+			model = PC87306;
+			break;
+		} else if ((val & 0xf8) == 0x50) {
+			model = PC87334;
+			break;
+		} else if ((val & 0xf8) == 0x40) {
+			model = PC87303;
+			break;
+		}
+
+		release_region(base, 2);
+	}
+
+	return (base == 0) ? -1 : 1;
+}
+
+void __init pc873xx_enable_epp19(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling EPP v1.9\n");
+	data = pc873xx_read(base, REG_PCR);
+	pc873xx_write(base, REG_PCR, (data & 0xFC) | 0x02);
+}
+
+void __init pc873xx_enable_ide(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling IDE interrupt\n");
+	data = pc873xx_read(base, REG_FER);
+	pc873xx_write(base, REG_FER, data | 0x40);
+}
diff --git a/arch/alpha/kernel/pc873xx.h b/arch/alpha/kernel/pc873xx.h
new file mode 100644
index 000000000000..25e16956fe3e
--- /dev/null
+++ b/arch/alpha/kernel/pc873xx.h
@@ -0,0 +1,35 @@
+
+#ifndef _PC873xx_H_
+#define _PC873xx_H_
+
+/*
+ * Control Register Values
+ */
+#define REG_FER	0x00
+#define REG_FAR	0x01
+#define REG_PTR	0x02
+#define REG_FCR	0x03
+#define REG_PCR	0x04
+#define REG_KRR	0x05
+#define REG_PMC	0x06
+#define REG_TUP	0x07
+#define REG_SID	0x08
+#define REG_ASC	0x09
+#define REG_IRC	0x0e
+
+/*
+ * Model numbers
+ */
+#define PC87303	0
+#define PC87306	1
+#define PC87312	2
+#define PC87332	3
+#define PC87334	4
+
+int pc873xx_probe(void);
+unsigned int pc873xx_get_base(void);
+char *pc873xx_get_model(void);
+void pc873xx_enable_epp19(void);
+void pc873xx_enable_ide(void);
+
+#endif
diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c
index d4327e461c22..85b4aea01ef8 100644
--- a/arch/alpha/kernel/sys_sio.c
+++ b/arch/alpha/kernel/sys_sio.c
@@ -34,6 +34,7 @@
 #include "irq_impl.h"
 #include "pci_impl.h"
 #include "machvec_impl.h"
+#include "pc873xx.h"
 
 #if defined(ALPHA_RESTORE_SRM_SETUP)
 /* Save LCA configuration data as the console had it set up.  */
@@ -208,7 +209,27 @@ noname_init_pci(void)
 	common_init_pci();
 	sio_pci_route();
 	sio_fixup_irq_levels(sio_collect_irq_levels());
-	ns87312_enable_ide(0x26e);
+
+	if (pc873xx_probe() == -1) {
+		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
+	} else {
+		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
+			pc873xx_get_model(), pc873xx_get_base());
+
+		/* Enabling things in the Super IO chip doesn't actually
+		 * configure and enable things, the legacy drivers still
+		 * need to do the actual configuration and enabling.
+		 * This only unblocks them.
+		 */
+
+#if !defined(CONFIG_ALPHA_AVANTI)
+		/* Don't bother on the Avanti family.
+		 * None of them had on-board IDE.
+		 */
+		pc873xx_enable_ide();
+#endif
+		pc873xx_enable_epp19();
+	}
 }
 
 static inline void __init
-- 
cgit v1.2.3


From 84cc1535cb9043ea1921b81cb086138c0f2dc2b9 Mon Sep 17 00:00:00 2001
From: "Morten H. Larsen" <m-larsen@post6.tele.dk>
Date: Tue, 15 Jun 2010 13:24:58 -0400
Subject: alpha: Fix de2104x driver failing to readout MAC address correctly

This patch fixes a missing read memory barrier that is needed for the
driver to readout the MAC address correctly from the on-board ROM.
Also it replaces the use of the deprecated functions readl()/writel().

Signed-off-by: Morten H. Larsen <m-larsen@post6.tele.dk>
Signed-off-by: Matt Turner <mattst88@gmail.com>
---
 drivers/net/tulip/de2104x.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index c0e70006374e..06b552fca63d 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -367,8 +367,8 @@ static u16 t21041_csr14[] = { 0xFFFF, 0xF7FD, 0xF7FD, 0x6F3F, 0x6F3D, };
 static u16 t21041_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, };
 
 
-#define dr32(reg)		readl(de->regs + (reg))
-#define dw32(reg,val)		writel((val), de->regs + (reg))
+#define dr32(reg)	ioread32(de->regs + (reg))
+#define dw32(reg, val)	iowrite32((val), de->regs + (reg))
 
 
 static void de_rx_err_acct (struct de_private *de, unsigned rx_tail,
@@ -1706,6 +1706,7 @@ static void __devinit de21040_get_mac_address (struct de_private *de)
 		int value, boguscnt = 100000;
 		do {
 			value = dr32(ROMCmd);
+			rmb();
 		} while (value < 0 && --boguscnt > 0);
 		de->dev->dev_addr[i] = value;
 		udelay(1);
-- 
cgit v1.2.3


From d6a574ff6bfb842bdb98065da053881ff527be46 Mon Sep 17 00:00:00 2001
From: Tim Gardner <tim.gardner@canonical.com>
Date: Tue, 8 Jun 2010 11:33:02 -0600
Subject: hostap: Protect against initialization interrupt

Use an irq spinlock to hold off the IRQ handler until
enough early card init is complete such that the handler
can run without faulting.

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/hostap/hostap_cs.c   | 15 +++++++++++++--
 drivers/net/wireless/hostap/hostap_hw.c   | 13 +++++++++++++
 drivers/net/wireless/hostap/hostap_wlan.h |  2 +-
 3 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index db72461c486b..29b31a694b59 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -594,6 +594,7 @@ static int prism2_config(struct pcmcia_device *link)
 	local_info_t *local;
 	int ret = 1;
 	struct hostap_cs_priv *hw_priv;
+	unsigned long flags;
 
 	PDEBUG(DEBUG_FLOW, "prism2_config()\n");
 
@@ -625,9 +626,15 @@ static int prism2_config(struct pcmcia_device *link)
 	local->hw_priv = hw_priv;
 	hw_priv->link = link;
 
+	/*
+	 * Make sure the IRQ handler cannot proceed until at least
+	 * dev->base_addr is initialized.
+	 */
+	spin_lock_irqsave(&local->irq_init_lock, flags);
+
 	ret = pcmcia_request_irq(link, prism2_interrupt);
 	if (ret)
-		goto failed;
+		goto failed_unlock;
 
 	/*
 	 * This actually configures the PCMCIA socket -- setting up
@@ -636,11 +643,13 @@ static int prism2_config(struct pcmcia_device *link)
 	 */
 	ret = pcmcia_request_configuration(link, &link->conf);
 	if (ret)
-		goto failed;
+		goto failed_unlock;
 
 	dev->irq = link->irq;
 	dev->base_addr = link->io.BasePort1;
 
+	spin_unlock_irqrestore(&local->irq_init_lock, flags);
+
 	/* Finally, report what we've done */
 	printk(KERN_INFO "%s: index 0x%02x: ",
 	       dev_info, link->conf.ConfigIndex);
@@ -667,6 +676,8 @@ static int prism2_config(struct pcmcia_device *link)
 
 	return ret;
 
+ failed_unlock:
+	 spin_unlock_irqrestore(&local->irq_init_lock, flags);
  failed:
 	kfree(hw_priv);
 	prism2_release((u_long)link);
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index ff9b5c882184..2f999fc94f60 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -2621,6 +2621,18 @@ static irqreturn_t prism2_interrupt(int irq, void *dev_id)
 	iface = netdev_priv(dev);
 	local = iface->local;
 
+	/* Detect early interrupt before driver is fully configued */
+	spin_lock(&local->irq_init_lock);
+	if (!dev->base_addr) {
+		if (net_ratelimit()) {
+			printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n",
+			       dev->name);
+		}
+		spin_unlock(&local->irq_init_lock);
+		return IRQ_HANDLED;
+	}
+	spin_unlock(&local->irq_init_lock);
+
 	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0);
 
 	if (local->func->card_present && !local->func->card_present(local)) {
@@ -3138,6 +3150,7 @@ prism2_init_local_data(struct prism2_helper_functions *funcs, int card_idx,
 	spin_lock_init(&local->cmdlock);
 	spin_lock_init(&local->baplock);
 	spin_lock_init(&local->lock);
+	spin_lock_init(&local->irq_init_lock);
 	mutex_init(&local->rid_bap_mtx);
 
 	if (card_idx < 0 || card_idx >= MAX_PARM_DEVICES)
diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h
index 3d238917af07..1ba33be98b25 100644
--- a/drivers/net/wireless/hostap/hostap_wlan.h
+++ b/drivers/net/wireless/hostap/hostap_wlan.h
@@ -654,7 +654,7 @@ struct local_info {
 	rwlock_t iface_lock; /* hostap_interfaces read lock; use write lock
 			      * when removing entries from the list.
 			      * TX and RX paths can use read lock. */
-	spinlock_t cmdlock, baplock, lock;
+	spinlock_t cmdlock, baplock, lock, irq_init_lock;
 	struct mutex rid_bap_mtx;
 	u16 infofid; /* MAC buffer id for info frame */
 	/* txfid, intransmitfid, next_txtid, and next_alloc are protected by
-- 
cgit v1.2.3


From fb73538e10c7fc4823a56e97bba600c2f9294012 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Fri, 11 Jun 2010 01:52:35 +0000
Subject: powerpc/5200: fix oops during going to standby

When going to standby mode mpc code maps the whole soc5200 node
to access warious MBAR registers. However as of_iomap uses 'reg'
property of device node, only small part of MBAR is getting mapped.
Thus pm code gets oops when trying to access high parts of MBAR.
As a way to overcome this, make mpc52xx_pm_prepare() explicitly
map whole MBAR (0xc0000).

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/platforms/52xx/mpc52xx_pm.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pm.c b/arch/powerpc/platforms/52xx/mpc52xx_pm.c
index a55b0b6813ed..76722532bd95 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pm.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pm.c
@@ -64,10 +64,19 @@ int mpc52xx_pm_prepare(void)
 		{ .type = "builtin", .compatible = "mpc5200", }, /* efika */
 		{}
 	};
+	struct resource res;
 
 	/* map the whole register space */
 	np = of_find_matching_node(NULL, immr_ids);
-	mbar = of_iomap(np, 0);
+
+	if (of_address_to_resource(np, 0, &res)) {
+		pr_err("mpc52xx_pm_prepare(): could not get IMMR address\n");
+		of_node_put(np);
+		return -ENOSYS;
+	}
+
+	mbar = ioremap(res.start, 0xc000); /* we should map whole region including SRAM */
+
 	of_node_put(np);
 	if (!mbar) {
 		pr_err("mpc52xx_pm_prepare(): could not map registers\n");
-- 
cgit v1.2.3


From f487537c2b6b23332bbea7ecb1fe793b6c74d5b2 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Mon, 14 Jun 2010 00:03:34 -0600
Subject: powerpc/5200: Fix build error in sound code.

Compiling in the MPC5200 sound drivers results in the following build error:

sound/soc/fsl/mpc5200_psc_ac97.o: In function `to_psc_dma_stream':
mpc5200_psc_ac97.c:(.text+0x0): multiple definition of `to_psc_dma_stream'
sound/soc/fsl/mpc5200_dma.o:mpc5200_dma.c:(.text+0x0): first defined here
sound/soc/fsl/efika-audio-fabric.o: In function `to_psc_dma_stream':
efika-audio-fabric.c:(.text+0x0): multiple definition of `to_psc_dma_stream'
sound/soc/fsl/mpc5200_dma.o:mpc5200_dma.c:(.text+0x0): first defined here
make[3]: *** [sound/soc/fsl/built-in.o] Error 1
make[2]: *** [sound/soc/fsl] Error 2
make[1]: *** [sound/soc] Error 2
make: *** [sound] Error 2

This patch fixes it by declaring the inline function in the header file to
also be a static.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Jon Smirl <jonsmirl@gmail.com>
Tested-by: John Hilmar Linkhorst <John.Linkhorst@rwth-aachen.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/fsl/mpc5200_dma.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/fsl/mpc5200_dma.h b/sound/soc/fsl/mpc5200_dma.h
index 22208b373fb9..e1ec6d91ea38 100644
--- a/sound/soc/fsl/mpc5200_dma.h
+++ b/sound/soc/fsl/mpc5200_dma.h
@@ -73,7 +73,7 @@ struct psc_dma {
 };
 
 /* Utility for retrieving psc_dma_stream structure from a substream */
-inline struct psc_dma_stream *
+static inline struct psc_dma_stream *
 to_psc_dma_stream(struct snd_pcm_substream *substream, struct psc_dma *psc_dma)
 {
 	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-- 
cgit v1.2.3


From 2b07be2493681220cac4d185494a4edb0b8efd1e Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Wed, 9 Jun 2010 21:16:20 +0000
Subject: powerpc/5200: fix lite5200 ethernet phy address

According to my schematics, on Lite5200 board ethernet phy uses address
0 (all ADDR lines are pulled down). With this change I can talk to
onboard phy (LXT971) and correctly use autonegotiation.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/boot/dts/lite5200.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index d1502ef85edb..179a1785d645 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -234,8 +234,8 @@
 			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
 			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
 
-			phy0: ethernet-phy@1 {
-				reg = <1>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
 			};
 		};
 
-- 
cgit v1.2.3


From 44b496f685ca68c0d96eb3ad88e3948fad3417d6 Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Fri, 11 Jun 2010 04:44:55 +0000
Subject: pcmcia: dev_node removal bugfix

Patch c7c2fa07 removed one line too much from smc91c92_cs.c.

Reported-by: Komuro <komurojun-mbn@nifty.com>
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/pcmcia/smc91c92_cs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 7b6fe89f9db0..64e6a84bbbbe 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -322,6 +322,7 @@ static int smc91c92_probe(struct pcmcia_device *link)
 	return -ENOMEM;
     smc = netdev_priv(dev);
     smc->p_dev = link;
+    link->priv = dev;
 
     spin_lock_init(&smc->lock);
     link->io.NumPorts1 = 16;
-- 
cgit v1.2.3


From bf445080dad9542c6bc6b693d941cae89605134c Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Sun, 13 Jun 2010 23:39:03 +0000
Subject: netxen: fix memory leaks in error path

Fixes memory leak in error path when memory allocation
for adapter data structures fails.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic_ctx.c  | 3 ++-
 drivers/net/netxen/netxen_nic_init.c | 4 ++--
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c
index f26e54716c88..3a41b6a84a68 100644
--- a/drivers/net/netxen/netxen_nic_ctx.c
+++ b/drivers/net/netxen/netxen_nic_ctx.c
@@ -629,7 +629,8 @@ int netxen_alloc_hw_resources(struct netxen_adapter *adapter)
 	if (addr == NULL) {
 		dev_err(&pdev->dev, "%s: failed to allocate tx desc ring\n",
 				netdev->name);
-		return -ENOMEM;
+		err = -ENOMEM;
+		goto err_out_free;
 	}
 
 	tx_ring->desc_head = (struct cmd_desc_type0 *)addr;
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 045a7c8f5bdf..e08527f4b301 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -218,7 +218,7 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 	if (cmd_buf_arr == NULL) {
 		dev_err(&pdev->dev, "%s: failed to allocate cmd buffer ring\n",
 		       netdev->name);
-		return -ENOMEM;
+		goto err_out;
 	}
 	memset(cmd_buf_arr, 0, TX_BUFF_RINGSIZE(tx_ring));
 	tx_ring->cmd_buf_arr = cmd_buf_arr;
@@ -230,7 +230,7 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 	if (rds_ring == NULL) {
 		dev_err(&pdev->dev, "%s: failed to allocate rds ring struct\n",
 		       netdev->name);
-		return -ENOMEM;
+		goto err_out;
 	}
 	recv_ctx->rds_rings = rds_ring;
 
-- 
cgit v1.2.3


From 2227bae22becb88b75ede022c7bb991aabfb50bb Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Sun, 13 Jun 2010 23:39:04 +0000
Subject: netxen: fix rcv buffer leak

Rcv producer should be read in spin-lock.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic_init.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index e08527f4b301..c865dda2adf1 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -1805,9 +1805,10 @@ netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ringid,
 	netxen_ctx_msg msg = 0;
 	struct list_head *head;
 
+	spin_lock(&rds_ring->lock);
+
 	producer = rds_ring->producer;
 
-	spin_lock(&rds_ring->lock);
 	head = &rds_ring->free_list;
 	while (!list_empty(head)) {
 
@@ -1829,7 +1830,6 @@ netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ringid,
 
 		producer = get_next_index(producer, rds_ring->num_desc);
 	}
-	spin_unlock(&rds_ring->lock);
 
 	if (count) {
 		rds_ring->producer = producer;
@@ -1853,6 +1853,8 @@ netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ringid,
 					NETXEN_RCV_PRODUCER_OFFSET), msg);
 		}
 	}
+
+	spin_unlock(&rds_ring->lock);
 }
 
 static void
@@ -1864,10 +1866,11 @@ netxen_post_rx_buffers_nodb(struct netxen_adapter *adapter,
 	int producer, count = 0;
 	struct list_head *head;
 
-	producer = rds_ring->producer;
 	if (!spin_trylock(&rds_ring->lock))
 		return;
 
+	producer = rds_ring->producer;
+
 	head = &rds_ring->free_list;
 	while (!list_empty(head)) {
 
-- 
cgit v1.2.3


From 7e43cd66d36e8f0900e87d9d287c9ee649cbdd07 Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Sun, 13 Jun 2010 23:39:05 +0000
Subject: netxen: fix caching window register

CRB window register is not per pci-func for NX3031,
so caching can result in incorrect values.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic_hw.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 5c496f8d7c49..29d7b93d0493 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -1159,9 +1159,6 @@ netxen_nic_pci_set_crbwindow_2M(struct netxen_adapter *adapter, ulong off)
 
 	window = CRB_HI(off);
 
-	if (adapter->ahw.crb_win == window)
-		return;
-
 	writel(window, addr);
 	if (readl(addr) != window) {
 		if (printk_ratelimit())
@@ -1169,7 +1166,6 @@ netxen_nic_pci_set_crbwindow_2M(struct netxen_adapter *adapter, ulong off)
 				"failed to set CRB window to %d off 0x%lx\n",
 				window, off);
 	}
-	adapter->ahw.crb_win = window;
 }
 
 static void __iomem *
-- 
cgit v1.2.3


From fed396a585d8e1870b326f2e8e1888a72957abb8 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Tue, 15 Jun 2010 21:43:07 -0700
Subject: bridge: Fix OOM crash in deliver_clone

The bridge multicast patches introduced an OOM crash in the forward
path, when deliver_clone fails to clone the skb.

Reported-by: Mark Wagner <mwagner@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/bridge/br_forward.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c
index a98ef1393097..a4e72a89e4ff 100644
--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -140,10 +140,10 @@ static int deliver_clone(const struct net_bridge_port *prev,
 			 void (*__packet_hook)(const struct net_bridge_port *p,
 					       struct sk_buff *skb))
 {
+	struct net_device *dev = BR_INPUT_SKB_CB(skb)->brdev;
+
 	skb = skb_clone(skb, GFP_ATOMIC);
 	if (!skb) {
-		struct net_device *dev = BR_INPUT_SKB_CB(skb)->brdev;
-
 		dev->stats.tx_dropped++;
 		return -ENOMEM;
 	}
-- 
cgit v1.2.3


From 2422f676fb78942d054f7e7a2c3ceaeb7945d814 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Wed, 16 Jun 2010 13:40:16 -0400
Subject: cifs: move cifs_new_fileinfo call out of cifs_posix_open

Having cifs_posix_open call cifs_new_fileinfo is problematic and
inconsistent with how "regular" opens work. It's also buggy as
cifs_reopen_file calls this function on a reconnect, which creates a new
struct cifsFileInfo that just gets leaked.

Push it out into the callers. This also allows us to get rid of the
"mnt" arg to cifs_posix_open.

Finally, in the event that a cifsFileInfo isn't or can't be created, we
always want to close the filehandle out on the server as the client
won't have a record of the filehandle and can't actually use it. Make
sure that CIFSSMBClose is called in those cases.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-and-Tested-by: Suresh Jayaraman <sjayaraman@suse.de>
---
 fs/cifs/cifsproto.h |  1 -
 fs/cifs/dir.c       | 43 ++++++++++++++++++-------------------------
 fs/cifs/file.c      | 17 ++++++++++++-----
 3 files changed, 30 insertions(+), 31 deletions(-)

diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index fb1657e0fdb8..fb6318b81509 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -106,7 +106,6 @@ extern struct cifsFileInfo *cifs_new_fileinfo(struct inode *newinode,
 				__u16 fileHandle, struct file *file,
 				struct vfsmount *mnt, unsigned int oflags);
 extern int cifs_posix_open(char *full_path, struct inode **pinode,
-				struct vfsmount *mnt,
 				struct super_block *sb,
 				int mode, int oflags,
 				__u32 *poplock, __u16 *pnetfid, int xid);
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 391816b461ca..f49afb9980e7 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -188,8 +188,7 @@ cifs_new_fileinfo(struct inode *newinode, __u16 fileHandle,
 }
 
 int cifs_posix_open(char *full_path, struct inode **pinode,
-			struct vfsmount *mnt, struct super_block *sb,
-			int mode, int oflags,
+			struct super_block *sb, int mode, int oflags,
 			__u32 *poplock, __u16 *pnetfid, int xid)
 {
 	int rc;
@@ -258,19 +257,6 @@ int cifs_posix_open(char *full_path, struct inode **pinode,
 		cifs_fattr_to_inode(*pinode, &fattr);
 	}
 
-	/*
-	 * cifs_fill_filedata() takes care of setting cifsFileInfo pointer to
-	 * file->private_data.
-	 */
-	if (mnt) {
-		struct cifsFileInfo *pfile_info;
-
-		pfile_info = cifs_new_fileinfo(*pinode, *pnetfid, NULL, mnt,
-					       oflags);
-		if (pfile_info == NULL)
-			rc = -ENOMEM;
-	}
-
 posix_open_ret:
 	kfree(presp_data);
 	return rc;
@@ -298,7 +284,6 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 	int create_options = CREATE_NOT_DIR;
 	__u32 oplock = 0;
 	int oflags;
-	bool posix_create = false;
 	/*
 	 * BB below access is probably too much for mknod to request
 	 *    but we have to do query and setpathinfo so requesting
@@ -339,7 +324,6 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 	    (CIFS_UNIX_POSIX_PATH_OPS_CAP &
 			le64_to_cpu(tcon->fsUnixInfo.Capability))) {
 		rc = cifs_posix_open(full_path, &newinode,
-			nd ? nd->path.mnt : NULL,
 			inode->i_sb, mode, oflags, &oplock, &fileHandle, xid);
 		/* EIO could indicate that (posix open) operation is not
 		   supported, despite what server claimed in capability
@@ -347,7 +331,6 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 		   handled in posix open */
 
 		if (rc == 0) {
-			posix_create = true;
 			if (newinode == NULL) /* query inode info */
 				goto cifs_create_get_file_info;
 			else /* success, no need to query */
@@ -478,11 +461,7 @@ cifs_create_set_dentry:
 	else
 		cFYI(1, "Create worked, get_inode_info failed rc = %d", rc);
 
-	/* nfsd case - nfs srv does not set nd */
-	if ((nd == NULL) || (!(nd->flags & LOOKUP_OPEN))) {
-		/* mknod case - do not leave file open */
-		CIFSSMBClose(xid, tcon, fileHandle);
-	} else if (!(posix_create) && (newinode)) {
+	if (newinode && nd && (nd->flags & LOOKUP_OPEN)) {
 		struct cifsFileInfo *pfile_info;
 		/*
 		 * cifs_fill_filedata() takes care of setting cifsFileInfo
@@ -492,7 +471,10 @@ cifs_create_set_dentry:
 					       nd->path.mnt, oflags);
 		if (pfile_info == NULL)
 			rc = -ENOMEM;
+	} else {
+		CIFSSMBClose(xid, tcon, fileHandle);
 	}
+
 cifs_create_out:
 	kfree(buf);
 	kfree(full_path);
@@ -636,6 +618,7 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 	bool posix_open = false;
 	struct cifs_sb_info *cifs_sb;
 	struct cifsTconInfo *pTcon;
+	struct cifsFileInfo *cfile;
 	struct inode *newInode = NULL;
 	char *full_path = NULL;
 	struct file *filp;
@@ -703,7 +686,7 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 		if (nd && !(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
 		     (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open &&
 		     (nd->intent.open.flags & O_CREAT)) {
-			rc = cifs_posix_open(full_path, &newInode, nd->path.mnt,
+			rc = cifs_posix_open(full_path, &newInode,
 					parent_dir_inode->i_sb,
 					nd->intent.open.create_mode,
 					nd->intent.open.flags, &oplock,
@@ -733,8 +716,17 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 		else
 			direntry->d_op = &cifs_dentry_ops;
 		d_add(direntry, newInode);
-		if (posix_open)
+		if (posix_open) {
+			cfile = cifs_new_fileinfo(newInode, fileHandle, NULL,
+						  nd->path.mnt,
+						  nd->intent.open.flags);
+			if (cfile == NULL) {
+				CIFSSMBClose(xid, pTcon, fileHandle);
+				rc = -ENOMEM;
+				goto lookup_out;
+			}
 			filp = lookup_instantiate_filp(nd, direntry, NULL);
+		}
 		/* since paths are not looked up by component - the parent
 		   directories are presumed to be good here */
 		renew_parental_timestamps(direntry);
@@ -755,6 +747,7 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 		is a common return code */
 	}
 
+lookup_out:
 	kfree(full_path);
 	FreeXid(xid);
 	return ERR_PTR(rc);
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 75541af4b3db..542e0c874d64 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -299,8 +299,7 @@ int cifs_open(struct inode *inode, struct file *file)
 		int oflags = (int) cifs_posix_convert_flags(file->f_flags);
 		oflags |= SMB_O_CREAT;
 		/* can not refresh inode info since size could be stale */
-		rc = cifs_posix_open(full_path, &inode, file->f_path.mnt,
-				inode->i_sb,
+		rc = cifs_posix_open(full_path, &inode, inode->i_sb,
 				cifs_sb->mnt_file_mode /* ignored */,
 				oflags, &oplock, &netfid, xid);
 		if (rc == 0) {
@@ -308,7 +307,16 @@ int cifs_open(struct inode *inode, struct file *file)
 			/* no need for special case handling of setting mode
 			   on read only files needed here */
 
-			pCifsFile = cifs_fill_filedata(file);
+			pCifsFile = cifs_new_fileinfo(inode, netfid, file,
+							file->f_path.mnt,
+							oflags);
+			if (pCifsFile == NULL) {
+				CIFSSMBClose(xid, tcon, netfid);
+				rc = -ENOMEM;
+				goto out;
+			}
+			file->private_data = pCifsFile;
+
 			cifs_posix_open_inode_helper(inode, file, pCifsInode,
 						     oplock, netfid);
 			goto out;
@@ -513,8 +521,7 @@ reopen_error_exit:
 			le64_to_cpu(tcon->fsUnixInfo.Capability))) {
 		int oflags = (int) cifs_posix_convert_flags(file->f_flags);
 		/* can not refresh inode info since size could be stale */
-		rc = cifs_posix_open(full_path, NULL, file->f_path.mnt,
-				inode->i_sb,
+		rc = cifs_posix_open(full_path, NULL, inode->i_sb,
 				cifs_sb->mnt_file_mode /* ignored */,
 				oflags, &oplock, &netfid, xid);
 		if (rc == 0) {
-- 
cgit v1.2.3


From 6ca9f3bae8b1854794dfa63cdd3b88b7dfe24c13 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Wed, 16 Jun 2010 13:40:16 -0400
Subject: cifs: pass instantiated filp back after open call

The current scheme of sticking open files on a list and assuming that
cifs_open will scoop them off of it is broken and leads to "Busy
inodes after umount..." errors at unmount time.

The problem is that there is no guarantee that cifs_open will always
be called after a ->lookup or ->create operation. If there are
permissions or other problems, then it's quite likely that it *won't*
be called.

Fix this by fully instantiating the filp whenever the file is created
and pass that filp back to the VFS. If there is a problem, the VFS
can clean up the references.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-and-Tested-by: Suresh Jayaraman <sjayaraman@suse.de>
---
 fs/cifs/dir.c  | 35 +++++++++++++++++++++++++++--------
 fs/cifs/file.c | 44 ++------------------------------------------
 2 files changed, 29 insertions(+), 50 deletions(-)

diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index f49afb9980e7..e7ae78b66fa1 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -25,6 +25,7 @@
 #include <linux/slab.h>
 #include <linux/namei.h>
 #include <linux/mount.h>
+#include <linux/file.h>
 #include "cifsfs.h"
 #include "cifspdu.h"
 #include "cifsglob.h"
@@ -184,6 +185,8 @@ cifs_new_fileinfo(struct inode *newinode, __u16 fileHandle,
 	}
 	write_unlock(&GlobalSMBSeslock);
 
+	file->private_data = pCifsFile;
+
 	return pCifsFile;
 }
 
@@ -463,14 +466,22 @@ cifs_create_set_dentry:
 
 	if (newinode && nd && (nd->flags & LOOKUP_OPEN)) {
 		struct cifsFileInfo *pfile_info;
-		/*
-		 * cifs_fill_filedata() takes care of setting cifsFileInfo
-		 * pointer to file->private_data.
-		 */
-		pfile_info = cifs_new_fileinfo(newinode, fileHandle, NULL,
+		struct file *filp;
+
+		filp = lookup_instantiate_filp(nd, direntry, generic_file_open);
+		if (IS_ERR(filp)) {
+			rc = PTR_ERR(filp);
+			CIFSSMBClose(xid, tcon, fileHandle);
+			goto cifs_create_out;
+		}
+
+		pfile_info = cifs_new_fileinfo(newinode, fileHandle, filp,
 					       nd->path.mnt, oflags);
-		if (pfile_info == NULL)
+		if (pfile_info == NULL) {
+			fput(filp);
+			CIFSSMBClose(xid, tcon, fileHandle);
 			rc = -ENOMEM;
+		}
 	} else {
 		CIFSSMBClose(xid, tcon, fileHandle);
 	}
@@ -717,15 +728,23 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 			direntry->d_op = &cifs_dentry_ops;
 		d_add(direntry, newInode);
 		if (posix_open) {
-			cfile = cifs_new_fileinfo(newInode, fileHandle, NULL,
+			filp = lookup_instantiate_filp(nd, direntry,
+						       generic_file_open);
+			if (IS_ERR(filp)) {
+				rc = PTR_ERR(filp);
+				CIFSSMBClose(xid, pTcon, fileHandle);
+				goto lookup_out;
+			}
+
+			cfile = cifs_new_fileinfo(newInode, fileHandle, filp,
 						  nd->path.mnt,
 						  nd->intent.open.flags);
 			if (cfile == NULL) {
+				fput(filp);
 				CIFSSMBClose(xid, pTcon, fileHandle);
 				rc = -ENOMEM;
 				goto lookup_out;
 			}
-			filp = lookup_instantiate_filp(nd, direntry, NULL);
 		}
 		/* since paths are not looked up by component - the parent
 		   directories are presumed to be good here */
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 542e0c874d64..9cbf0f097a39 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -162,38 +162,6 @@ psx_client_can_cache:
 	return 0;
 }
 
-static struct cifsFileInfo *
-cifs_fill_filedata(struct file *file)
-{
-	struct list_head *tmp;
-	struct cifsFileInfo *pCifsFile = NULL;
-	struct cifsInodeInfo *pCifsInode = NULL;
-
-	/* search inode for this file and fill in file->private_data */
-	pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
-	read_lock(&GlobalSMBSeslock);
-	list_for_each(tmp, &pCifsInode->openFileList) {
-		pCifsFile = list_entry(tmp, struct cifsFileInfo, flist);
-		if ((pCifsFile->pfile == NULL) &&
-		    (pCifsFile->pid == current->tgid)) {
-			/* mode set in cifs_create */
-
-			/* needed for writepage */
-			pCifsFile->pfile = file;
-			file->private_data = pCifsFile;
-			break;
-		}
-	}
-	read_unlock(&GlobalSMBSeslock);
-
-	if (file->private_data != NULL) {
-		return pCifsFile;
-	} else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL))
-			cERROR(1, "could not find file instance for "
-				   "new file %p", file);
-	return NULL;
-}
-
 /* all arguments to this function must be checked for validity in caller */
 static inline int cifs_open_inode_helper(struct inode *inode, struct file *file,
 	struct cifsInodeInfo *pCifsInode, struct cifsFileInfo *pCifsFile,
@@ -256,7 +224,7 @@ int cifs_open(struct inode *inode, struct file *file)
 	__u32 oplock;
 	struct cifs_sb_info *cifs_sb;
 	struct cifsTconInfo *tcon;
-	struct cifsFileInfo *pCifsFile;
+	struct cifsFileInfo *pCifsFile = NULL;
 	struct cifsInodeInfo *pCifsInode;
 	char *full_path = NULL;
 	int desiredAccess;
@@ -270,12 +238,6 @@ int cifs_open(struct inode *inode, struct file *file)
 	tcon = cifs_sb->tcon;
 
 	pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
-	pCifsFile = cifs_fill_filedata(file);
-	if (pCifsFile) {
-		rc = 0;
-		FreeXid(xid);
-		return rc;
-	}
 
 	full_path = build_path_from_dentry(file->f_path.dentry);
 	if (full_path == NULL) {
@@ -315,7 +277,6 @@ int cifs_open(struct inode *inode, struct file *file)
 				rc = -ENOMEM;
 				goto out;
 			}
-			file->private_data = pCifsFile;
 
 			cifs_posix_open_inode_helper(inode, file, pCifsInode,
 						     oplock, netfid);
@@ -401,8 +362,7 @@ int cifs_open(struct inode *inode, struct file *file)
 
 	pCifsFile = cifs_new_fileinfo(inode, netfid, file, file->f_path.mnt,
 					file->f_flags);
-	file->private_data = pCifsFile;
-	if (file->private_data == NULL) {
+	if (pCifsFile == NULL) {
 		rc = -ENOMEM;
 		goto out;
 	}
-- 
cgit v1.2.3


From db460242bf75624344efd670ec0f620f476529a3 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Wed, 16 Jun 2010 13:40:17 -0400
Subject: cifs: clean up arguments to cifs_open_inode_helper

...which takes a ton of unneeded arguments and does a lot more pointer
dereferencing than is really needed.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-and-Tested-by: Suresh Jayaraman <sjayaraman@suse.de>
---
 fs/cifs/file.c | 30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 9cbf0f097a39..5b9d1f25aaec 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -163,11 +163,11 @@ psx_client_can_cache:
 }
 
 /* all arguments to this function must be checked for validity in caller */
-static inline int cifs_open_inode_helper(struct inode *inode, struct file *file,
-	struct cifsInodeInfo *pCifsInode, struct cifsFileInfo *pCifsFile,
+static inline int cifs_open_inode_helper(struct inode *inode,
 	struct cifsTconInfo *pTcon, int *oplock, FILE_ALL_INFO *buf,
 	char *full_path, int xid)
 {
+	struct cifsInodeInfo *pCifsInode = CIFS_I(inode);
 	struct timespec temp;
 	int rc;
 
@@ -181,36 +181,35 @@ static inline int cifs_open_inode_helper(struct inode *inode, struct file *file,
 	/* if not oplocked, invalidate inode pages if mtime or file
 	   size changed */
 	temp = cifs_NTtimeToUnix(buf->LastWriteTime);
-	if (timespec_equal(&file->f_path.dentry->d_inode->i_mtime, &temp) &&
-			   (file->f_path.dentry->d_inode->i_size ==
+	if (timespec_equal(&inode->i_mtime, &temp) &&
+			   (inode->i_size ==
 			    (loff_t)le64_to_cpu(buf->EndOfFile))) {
 		cFYI(1, "inode unchanged on server");
 	} else {
-		if (file->f_path.dentry->d_inode->i_mapping) {
+		if (inode->i_mapping) {
 			/* BB no need to lock inode until after invalidate
 			since namei code should already have it locked? */
-			rc = filemap_write_and_wait(file->f_path.dentry->d_inode->i_mapping);
+			rc = filemap_write_and_wait(inode->i_mapping);
 			if (rc != 0)
-				CIFS_I(file->f_path.dentry->d_inode)->write_behind_rc = rc;
+				pCifsInode->write_behind_rc = rc;
 		}
 		cFYI(1, "invalidating remote inode since open detected it "
 			 "changed");
-		invalidate_remote_inode(file->f_path.dentry->d_inode);
+		invalidate_remote_inode(inode);
 	}
 
 client_can_cache:
 	if (pTcon->unix_ext)
-		rc = cifs_get_inode_info_unix(&file->f_path.dentry->d_inode,
-			full_path, inode->i_sb, xid);
+		rc = cifs_get_inode_info_unix(&inode, full_path, inode->i_sb,
+					      xid);
 	else
-		rc = cifs_get_inode_info(&file->f_path.dentry->d_inode,
-			full_path, buf, inode->i_sb, xid, NULL);
+		rc = cifs_get_inode_info(&inode, full_path, buf, inode->i_sb,
+					 xid, NULL);
 
 	if ((*oplock & 0xF) == OPLOCK_EXCLUSIVE) {
 		pCifsInode->clientCanCacheAll = true;
 		pCifsInode->clientCanCacheRead = true;
-		cFYI(1, "Exclusive Oplock granted on inode %p",
-			 file->f_path.dentry->d_inode);
+		cFYI(1, "Exclusive Oplock granted on inode %p", inode);
 	} else if ((*oplock & 0xF) == OPLOCK_READ)
 		pCifsInode->clientCanCacheRead = true;
 
@@ -367,8 +366,7 @@ int cifs_open(struct inode *inode, struct file *file)
 		goto out;
 	}
 
-	rc = cifs_open_inode_helper(inode, file, pCifsInode, pCifsFile, tcon,
-				    &oplock, buf, full_path, xid);
+	rc = cifs_open_inode_helper(inode, tcon, &oplock, buf, full_path, xid);
 
 	if (oplock & CIFS_CREATE_ACTION) {
 		/* time to set mode which we can not set earlier due to
-- 
cgit v1.2.3


From d9d5d8df953a98621be5b8889e05043d6e32052e Mon Sep 17 00:00:00 2001
From: Suresh Jayaraman <sjayaraman@suse.de>
Date: Wed, 16 Jun 2010 13:40:17 -0400
Subject: cifs: don't ignore cifs_posix_open_inode_helper return value

...and ensure that we propagate the error back to avoid any surprises.

Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-and-Tested-by: Jeff Layton <jlayton@redhat.com>
---
 fs/cifs/file.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 5b9d1f25aaec..02a2df9cdd9c 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -277,8 +277,8 @@ int cifs_open(struct inode *inode, struct file *file)
 				goto out;
 			}
 
-			cifs_posix_open_inode_helper(inode, file, pCifsInode,
-						     oplock, netfid);
+			rc = cifs_posix_open_inode_helper(inode, file,
+					pCifsInode, oplock, netfid);
 			goto out;
 		} else if ((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
 			if (tcon->ses->serverNOS)
-- 
cgit v1.2.3


From 47c78b7f40a9931a264e3c9bddccacdf8dfb9a30 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Wed, 16 Jun 2010 13:40:17 -0400
Subject: cifs: don't call cifs_new_fileinfo unless cifs_open succeeds

It's currently possible for cifs_open to fail after it has already
called cifs_new_fileinfo. In that situation, the new fileinfo will be
leaked as the caller doesn't call fput. That in turn leads to a busy
inodes after umount problem since the fileinfo holds an extra inode
reference now. Shuffle cifs_open around a bit so that it only calls
cifs_new_fileinfo if it's going to succeed.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-and-Tested-by: Suresh Jayaraman <sjayaraman@suse.de>
---
 fs/cifs/file.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 02a2df9cdd9c..409e4f523e61 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -268,17 +268,20 @@ int cifs_open(struct inode *inode, struct file *file)
 			/* no need for special case handling of setting mode
 			   on read only files needed here */
 
+			rc = cifs_posix_open_inode_helper(inode, file,
+					pCifsInode, oplock, netfid);
+			if (rc != 0) {
+				CIFSSMBClose(xid, tcon, netfid);
+				goto out;
+			}
+
 			pCifsFile = cifs_new_fileinfo(inode, netfid, file,
 							file->f_path.mnt,
 							oflags);
 			if (pCifsFile == NULL) {
 				CIFSSMBClose(xid, tcon, netfid);
 				rc = -ENOMEM;
-				goto out;
 			}
-
-			rc = cifs_posix_open_inode_helper(inode, file,
-					pCifsInode, oplock, netfid);
 			goto out;
 		} else if ((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
 			if (tcon->ses->serverNOS)
@@ -359,6 +362,10 @@ int cifs_open(struct inode *inode, struct file *file)
 		goto out;
 	}
 
+	rc = cifs_open_inode_helper(inode, tcon, &oplock, buf, full_path, xid);
+	if (rc != 0)
+		goto out;
+
 	pCifsFile = cifs_new_fileinfo(inode, netfid, file, file->f_path.mnt,
 					file->f_flags);
 	if (pCifsFile == NULL) {
@@ -366,8 +373,6 @@ int cifs_open(struct inode *inode, struct file *file)
 		goto out;
 	}
 
-	rc = cifs_open_inode_helper(inode, tcon, &oplock, buf, full_path, xid);
-
 	if (oplock & CIFS_CREATE_ACTION) {
 		/* time to set mode which we can not set earlier due to
 		   problems creating new read-only files */
-- 
cgit v1.2.3


From 8a224d489454b7457105848610cfebebdec5638d Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Wed, 16 Jun 2010 13:40:18 -0400
Subject: cifs: remove bogus first_time check in NTLMv2 session setup code

This bug appears to be the result of a cut-and-paste mistake from the
NTLMv1 code. The function to generate the MAC key was commented out, but
not the conditional above it. The conditional then ended up causing the
session setup key not to be copied to the buffer unless this was the
first session on the socket, and that made all but the first NTLMv2
session setup fail.

Fix this by removing the conditional and all of the commented clutter
that made it difficult to see.

Cc: Stable <stable@kernel.org>
Reported-by: Gunther Deschner <gdeschne@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
---
 fs/cifs/sess.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 7707389bdf2c..0a57cb7db5dd 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -730,15 +730,7 @@ ssetup_ntlmssp_authenticate:
 
 		/* calculate session key */
 		setup_ntlmv2_rsp(ses, v2_sess_key, nls_cp);
-		if (first_time) /* should this be moved into common code
-				   with similar ntlmv2 path? */
-		/*   cifs_calculate_ntlmv2_mac_key(ses->server->mac_signing_key,
-				response BB FIXME, v2_sess_key); */
-
-		/* copy session key */
-
-	/*	memcpy(bcc_ptr, (char *)ntlm_session_key,LM2_SESS_KEY_SIZE);
-		bcc_ptr += LM2_SESS_KEY_SIZE; */
+		/* FIXME: calculate MAC key */
 		memcpy(bcc_ptr, (char *)v2_sess_key,
 		       sizeof(struct ntlmv2_resp));
 		bcc_ptr += sizeof(struct ntlmv2_resp);
-- 
cgit v1.2.3


From 021570e55b7152843376b9d9f60624e3e05ac054 Mon Sep 17 00:00:00 2001
From: Christoph Fritz <chf.fritz@googlemail.com>
Date: Wed, 16 Jun 2010 16:37:34 +0200
Subject: mac80211: fix warn, enum may be used uninitialized
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

regression introduced by b8d92c9c141ee3dc9b3537b1f0ffb4a54ea8d9b2

In function ‘ieee80211_work_rx_queued_mgmt’:
warning: ‘rma’ may be used uninitialized in this function

this re-adds default value WORK_ACT_NONE back to rma

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/work.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/work.c b/net/mac80211/work.c
index be3d4a698692..b025dc7bb0fd 100644
--- a/net/mac80211/work.c
+++ b/net/mac80211/work.c
@@ -715,7 +715,7 @@ static void ieee80211_work_rx_queued_mgmt(struct ieee80211_local *local,
 	struct ieee80211_rx_status *rx_status;
 	struct ieee80211_mgmt *mgmt;
 	struct ieee80211_work *wk;
-	enum work_action rma;
+	enum work_action rma = WORK_ACT_NONE;
 	u16 fc;
 
 	rx_status = (struct ieee80211_rx_status *) skb->cb;
-- 
cgit v1.2.3


From 97553f7f3e7a0305d017df9cc6e9589f64878437 Mon Sep 17 00:00:00 2001
From: Manfred Rudigier <Manfred.Rudigier@omicron.at>
Date: Fri, 11 Jun 2010 01:49:05 +0000
Subject: gianfar: Fix setup of RX time stamping

Previously the RCTRL_TS_ENABLE bit was set unconditionally. However, if
the RCTRL_TS_ENABLE is set without TMR_CTRL[TE], the driver does not work
properly on some boards (Anton had problems with the MPC8313ERDB and
MPC8568EMDS).

With this patch the bit will only be set if requested from user space
with the SIOCSHWTSTAMP ioctl command, meaning that time stamping is
disabled during normal operation. Users who are not interested in time
stamps will not experience problems with buggy CPU revisions or
performance drops any more.

The setting of TMR_CTRL[TE] is still up to the user. This is considered
safe because users wanting HW timestamps must initialize the eTSEC clock
first anyway, e.g. with the recently submitted PTP clock driver.

Signed-off-by: Manfred Rudigier <manfred.rudigier@omicron.at>
Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/gianfar.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 46c69cd06553..227b628bc214 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -381,10 +381,14 @@ static void gfar_init_mac(struct net_device *ndev)
 	/* Insert receive time stamps into padding alignment bytes */
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER) {
 		rctrl &= ~RCTRL_PAL_MASK;
-		rctrl |= RCTRL_PRSDEP_INIT | RCTRL_TS_ENABLE | RCTRL_PADDING(8);
+		rctrl |= RCTRL_PADDING(8);
 		priv->padding = 8;
 	}
 
+	/* Enable HW time stamping if requested from user space */
+	if (priv->hwts_rx_en)
+		rctrl |= RCTRL_PRSDEP_INIT | RCTRL_TS_ENABLE;
+
 	/* keep vlan related bits if it's enabled */
 	if (priv->vlgrp) {
 		rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT;
@@ -747,7 +751,8 @@ static int gfar_of_init(struct of_device *ofdev, struct net_device **pdev)
 			FSL_GIANFAR_DEV_HAS_CSUM |
 			FSL_GIANFAR_DEV_HAS_VLAN |
 			FSL_GIANFAR_DEV_HAS_MAGIC_PACKET |
-			FSL_GIANFAR_DEV_HAS_EXTENDED_HASH;
+			FSL_GIANFAR_DEV_HAS_EXTENDED_HASH |
+			FSL_GIANFAR_DEV_HAS_TIMER;
 
 	ctype = of_get_property(np, "phy-connection-type", NULL);
 
@@ -805,12 +810,20 @@ static int gfar_hwtstamp_ioctl(struct net_device *netdev,
 
 	switch (config.rx_filter) {
 	case HWTSTAMP_FILTER_NONE:
-		priv->hwts_rx_en = 0;
+		if (priv->hwts_rx_en) {
+			stop_gfar(netdev);
+			priv->hwts_rx_en = 0;
+			startup_gfar(netdev);
+		}
 		break;
 	default:
 		if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER))
 			return -ERANGE;
-		priv->hwts_rx_en = 1;
+		if (!priv->hwts_rx_en) {
+			stop_gfar(netdev);
+			priv->hwts_rx_en = 1;
+			startup_gfar(netdev);
+		}
 		config.rx_filter = HWTSTAMP_FILTER_ALL;
 		break;
 	}
-- 
cgit v1.2.3


From fa68a7822780fdc1295f7efb7e4313e62b447e75 Mon Sep 17 00:00:00 2001
From: Tom Hughes <tom@compton.nu>
Date: Tue, 15 Jun 2010 22:24:28 +0000
Subject: Clear IFF_XMIT_DST_RELEASE for teql interfaces

https://bugzilla.kernel.org/show_bug.cgi?id=16183

The sch_teql module, which can be used to load balance over a set of
underlying interfaces, stopped working after 2.6.30 and has been
broken in all kernels since then for any underlying interface which
requires the addition of link level headers.

The problem is that the transmit routine relies on being able to
access the destination address in the skb in order to do address
resolution once it has decided which underlying interface it is going
to transmit through.

In 2.6.31 the IFF_XMIT_DST_RELEASE flag was introduced, and set by
default for all interfaces, which causes the destination address to be
released before the transmit routine for the interface is called.

The solution is to clear that flag for teql interfaces.

Signed-off-by: Tom Hughes <tom@compton.nu>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_teql.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index 3415b6ce1c0a..807643bdcbac 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -449,6 +449,7 @@ static __init void teql_master_setup(struct net_device *dev)
 	dev->tx_queue_len	= 100;
 	dev->flags		= IFF_NOARP;
 	dev->hard_header_len	= LL_MAX_HEADER;
+	dev->priv_flags		&= ~IFF_XMIT_DST_RELEASE;
 }
 
 static LIST_HEAD(master_dev_list);
-- 
cgit v1.2.3


From 756725064fe6abbcdb43b1e64d017649b828be35 Mon Sep 17 00:00:00 2001
From: Don Skidmore <donald.c.skidmore@intel.com>
Date: Tue, 15 Jun 2010 09:23:17 +0000
Subject: ixgbe: add comment on SFP+ ID for Active DA

These comments were forgotten in the initial patch to add this
functionality.  This patch corrects that.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_phy.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 09e1911ff510..48325a5beff2 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -575,6 +575,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 		 * 4    SFP_DA_CORE1 - 82599-specific
 		 * 5    SFP_SR/LR_CORE0 - 82599-specific
 		 * 6    SFP_SR/LR_CORE1 - 82599-specific
+		 * 7    SFP_act_lmt_DA_CORE0 - 82599-specific
+		 * 8    SFP_act_lmt_DA_CORE1 - 82599-specific
 		 */
 		if (hw->mac.type == ixgbe_mac_82598EB) {
 			if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
-- 
cgit v1.2.3


From a91fb143de61dce847e319ca79b9937a665ad622 Mon Sep 17 00:00:00 2001
From: Jan-Bernd Themann <ossthema@de.ibm.com>
Date: Tue, 15 Jun 2010 05:35:16 +0000
Subject: ehea: fix delayed packet processing

In the eHEA poll function an rmb() is required. Without that some packets
on the receive queue are not seen and thus delayed until the next interrupt
is handled for the same receive queue.

Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ehea/ehea_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index f547894ff48f..fd890faf5174 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -867,6 +867,7 @@ static int ehea_poll(struct napi_struct *napi, int budget)
 		ehea_reset_cq_ep(pr->send_cq);
 		ehea_reset_cq_n1(pr->recv_cq);
 		ehea_reset_cq_n1(pr->send_cq);
+		rmb();
 		cqe = ehea_poll_rq1(pr->qp, &wqe_index);
 		cqe_skb = ehea_poll_cq(pr->send_cq);
 
-- 
cgit v1.2.3


From 099473c16bac7b936994bc95b5fd96f36397e1ad Mon Sep 17 00:00:00 2001
From: Jan-Bernd Themann <ossthema@de.ibm.com>
Date: Tue, 15 Jun 2010 05:35:42 +0000
Subject: ehea: Fix kernel deadlock in DLPAR-mem processing

Port reset operations and memory add/remove operations need to
be serialized to avoid a kernel deadlock. The deadlock is caused
by calling the napi_disable() function twice.
Therefore we have to employ the dlpar_mem_lock in the ehea_reset_port
function as well

Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ehea/ehea.h      | 2 +-
 drivers/net/ehea/ehea_main.c | 8 +++-----
 2 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 0630980a2722..0060e422f171 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"ehea"
-#define DRV_VERSION	"EHEA_0103"
+#define DRV_VERSION	"EHEA_0105"
 
 /* eHEA capability flags */
 #define DLPAR_PORT_ADD_REM 1
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index fd890faf5174..8b92acb448c2 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -2860,6 +2860,7 @@ static void ehea_reset_port(struct work_struct *work)
 		container_of(work, struct ehea_port, reset_task);
 	struct net_device *dev = port->netdev;
 
+	mutex_lock(&dlpar_mem_lock);
 	port->resets++;
 	mutex_lock(&port->port_lock);
 	netif_stop_queue(dev);
@@ -2882,6 +2883,7 @@ static void ehea_reset_port(struct work_struct *work)
 	netif_wake_queue(dev);
 out:
 	mutex_unlock(&port->port_lock);
+	mutex_unlock(&dlpar_mem_lock);
 }
 
 static void ehea_rereg_mrs(struct work_struct *work)
@@ -3543,10 +3545,7 @@ static int ehea_mem_notifier(struct notifier_block *nb,
 	int ret = NOTIFY_BAD;
 	struct memory_notify *arg = data;
 
-	if (!mutex_trylock(&dlpar_mem_lock)) {
-		ehea_info("ehea_mem_notifier must not be called parallelized");
-		goto out;
-	}
+	mutex_lock(&dlpar_mem_lock);
 
 	switch (action) {
 	case MEM_CANCEL_OFFLINE:
@@ -3575,7 +3574,6 @@ static int ehea_mem_notifier(struct notifier_block *nb,
 
 out_unlock:
 	mutex_unlock(&dlpar_mem_lock);
-out:
 	return ret;
 }
 
-- 
cgit v1.2.3


From 63b88b9041ceef8217f34de71a2e96f0c3f0fd3b Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@mvista.com>
Date: Fri, 11 Jun 2010 10:51:03 +0000
Subject: gianfar: Fix oversized packets handling

Issuing the following command on host:

$ ifconfig eth2 mtu 1600 ; ping 10.0.0.27 -s 1485 -c 1

Makes some boards (tested with MPC8315 rev 1.1 and MPC8313 rev 1.0)
oops like this:

  skb_over_panic: text:c0195914 len:1537 put:1537 head:c79e4800 data:c79e4880 tail:0xc79e4e81 end:0xc79e4e80 dev:eth1
  ------------[ cut here ]------------
  kernel BUG at net/core/skbuff.c:127!
  Oops: Exception in kernel mode, sig: 5 [#1]
  MPC831x RDB
  last sysfs file: /sys/kernel/uevent_seqnum
  Modules linked in:
  NIP: c01c1840 LR: c01c1840 CTR: c016d918
  [...]
  NIP [c01c1840] skb_over_panic+0x48/0x5c
  LR [c01c1840] skb_over_panic+0x48/0x5c
  Call Trace:
  [c0339d50] [c01c1840] skb_over_panic+0x48/0x5c (unreliable)
  [c0339d60] [c01c3020] skb_put+0x5c/0x60
  [c0339d70] [c0195914] gfar_clean_rx_ring+0x25c/0x3d0
  [c0339dc0] [c01976e8] gfar_poll+0x170/0x1bc

Dumped buffer descriptors showed that eTSEC's length/truncation
logic sometimes passes oversized packets, i.e. for the above ICMP
packet the following two buffer descriptors may become ready:

  status=1400 length=1536
  status=1800 length=1541

So, it seems that gianfar actually receives the whole big frame,
and it tries to place the packet into two BDs. This situation
confuses the driver, and so the skb_put() sanity check fails.

This patch fixes the issue by adding an appropriate check, i.e.
the driver should not try to process frames with buffer
descriptor's length over rx_buffer_size (i.e. maxfrm and mrblr).

Note that sometimes eTSEC works correctly, i.e. in the second
(last) buffer descriptor bits 'truncated' and 'crcerr' are set,
and so there's no oops. Though I couldn't find any logic when
it works correctly and when not.

Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/gianfar.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 227b628bc214..28b53d1cd4f1 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -2655,6 +2655,10 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit)
 		dma_unmap_single(&priv->ofdev->dev, bdp->bufPtr,
 				priv->rx_buffer_size, DMA_FROM_DEVICE);
 
+		if (unlikely(!(bdp->status & RXBD_ERR) &&
+				bdp->length > priv->rx_buffer_size))
+			bdp->status = RXBD_LARGE;
+
 		/* We drop the frame if we failed to allocate a new buffer */
 		if (unlikely(!newskb || !(bdp->status & RXBD_LAST) ||
 				 bdp->status & RXBD_ERR)) {
-- 
cgit v1.2.3


From 8b1d920fa5ea8e3d941e908fa57acc9b1df9ca92 Mon Sep 17 00:00:00 2001
From: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Date: Sat, 12 Jun 2010 00:17:28 +0000
Subject: pcnet_cs: add new id (TOSHIBA Modem/LAN Card)

pcnet_cs:
serial_cs:
    add new id (TOSHIBA Modem/LAN Card)

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/pcmcia/pcnet_cs.c | 1 +
 drivers/serial/serial_cs.c    | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 6f77a768ba88..bfdef72c5d5e 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1727,6 +1727,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"),
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index dadd686c9801..8bb715a1a7a6 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -807,6 +807,7 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
-- 
cgit v1.2.3


From db176edc89abbf22e6db6853f8581f9475fe8ec1 Mon Sep 17 00:00:00 2001
From: Sergey Matyukevich <geomatsi@gmail.com>
Date: Mon, 14 Jun 2010 06:35:20 +0000
Subject: ucc_geth: fix for RX skb buffers recycling

This patch implements a proper modification of RX skb buffers before
recycling. Adjusting only skb->data is not enough because after that
skb->tail and skb->len become incorrect.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ucc_geth.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 4a34833b85dd..807470e156af 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3215,6 +3215,8 @@ static int ucc_geth_rx(struct ucc_geth_private *ugeth, u8 rxQ, int rx_work_limit
 					   __func__, __LINE__, (u32) skb);
 			if (skb) {
 				skb->data = skb->head + NET_SKB_PAD;
+				skb->len = 0;
+				skb_reset_tail_pointer(skb);
 				__skb_queue_head(&ugeth->rx_recycle, skb);
 			}
 
-- 
cgit v1.2.3


From 2a383cb3f1a571b281c2e1ace4c8491f0370e866 Mon Sep 17 00:00:00 2001
From: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Date: Thu, 17 Jun 2010 17:08:36 +1200
Subject: ALSA: asihpi - Get rid of incorrect "long" types and casts.

These give incorrect results for index wrap on 64 bit.

Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/asihpi/hpi6205.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c
index e89991ea3543..3b4413448226 100644
--- a/sound/pci/asihpi/hpi6205.c
+++ b/sound/pci/asihpi/hpi6205.c
@@ -941,11 +941,11 @@ static void outstream_host_buffer_free(struct hpi_adapter_obj *pao,
 
 }
 
-static long outstream_get_space_available(struct hpi_hostbuffer_status
+static u32 outstream_get_space_available(struct hpi_hostbuffer_status
 	*status)
 {
-	return status->size_in_bytes - ((long)(status->host_index) -
-		(long)(status->dSP_index));
+	return status->size_in_bytes - (status->host_index -
+		status->dSP_index);
 }
 
 static void outstream_write(struct hpi_adapter_obj *pao,
@@ -954,7 +954,7 @@ static void outstream_write(struct hpi_adapter_obj *pao,
 	struct hpi_hw_obj *phw = pao->priv;
 	struct bus_master_interface *interface = phw->p_interface_buffer;
 	struct hpi_hostbuffer_status *status;
-	long space_available;
+	u32 space_available;
 
 	if (!phw->outstream_host_buffer_size[phm->obj_index]) {
 		/* there  is no BBM buffer, write via message */
@@ -1007,7 +1007,7 @@ static void outstream_write(struct hpi_adapter_obj *pao,
 	}
 
 	space_available = outstream_get_space_available(status);
-	if (space_available < (long)phm->u.d.u.data.data_size) {
+	if (space_available < phm->u.d.u.data.data_size) {
 		phr->error = HPI_ERROR_INVALID_DATASIZE;
 		return;
 	}
@@ -1018,7 +1018,7 @@ static void outstream_write(struct hpi_adapter_obj *pao,
 		&& hpios_locked_mem_valid(&phw->outstream_host_buffers[phm->
 				obj_index])) {
 		u8 *p_bbm_data;
-		long l_first_write;
+		u32 l_first_write;
 		u8 *p_app_data = (u8 *)phm->u.d.u.data.pb_data;
 
 		if (hpios_locked_mem_get_virt_addr(&phw->
@@ -1248,9 +1248,9 @@ static void instream_start(struct hpi_adapter_obj *pao,
 	hw_message(pao, phm, phr);
 }
 
-static long instream_get_bytes_available(struct hpi_hostbuffer_status *status)
+static u32 instream_get_bytes_available(struct hpi_hostbuffer_status *status)
 {
-	return (long)(status->dSP_index) - (long)(status->host_index);
+	return status->dSP_index - status->host_index;
 }
 
 static void instream_read(struct hpi_adapter_obj *pao,
@@ -1259,9 +1259,9 @@ static void instream_read(struct hpi_adapter_obj *pao,
 	struct hpi_hw_obj *phw = pao->priv;
 	struct bus_master_interface *interface = phw->p_interface_buffer;
 	struct hpi_hostbuffer_status *status;
-	long data_available;
+	u32 data_available;
 	u8 *p_bbm_data;
-	long l_first_read;
+	u32 l_first_read;
 	u8 *p_app_data = (u8 *)phm->u.d.u.data.pb_data;
 
 	if (!phw->instream_host_buffer_size[phm->obj_index]) {
@@ -1272,7 +1272,7 @@ static void instream_read(struct hpi_adapter_obj *pao,
 
 	status = &interface->instream_host_buffer_status[phm->obj_index];
 	data_available = instream_get_bytes_available(status);
-	if (data_available < (long)phm->u.d.u.data.data_size) {
+	if (data_available < phm->u.d.u.data.data_size) {
 		phr->error = HPI_ERROR_INVALID_DATASIZE;
 		return;
 	}
-- 
cgit v1.2.3


From a92d3ff9e5dbd958d8008a3e7a573e988e370ca3 Mon Sep 17 00:00:00 2001
From: "Pavel V. Panteleev" <pp_84@mail.ru>
Date: Thu, 17 Jun 2010 10:07:25 +0200
Subject: percpu: fix trivial bugs in pcpu_build_alloc_info()

Fix the following two trivial bugs in pcpu_build_alloc_info()

* we should memset group_cnt to 0 by size of group_cnt, not size of
  group_map (both are of the same size, so the bug isn't dangerous)

* we can delete useless variable group_cnt_max.

Signed-off-by: Pavel V. Panteleev <pp_84@mail.ru>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 mm/percpu.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/mm/percpu.c b/mm/percpu.c
index 39f7dfd59585..46485e1b26fc 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -1086,7 +1086,7 @@ struct pcpu_alloc_info * __init pcpu_build_alloc_info(
 	static int group_map[NR_CPUS] __initdata;
 	static int group_cnt[NR_CPUS] __initdata;
 	const size_t static_size = __per_cpu_end - __per_cpu_start;
-	int group_cnt_max = 0, nr_groups = 1, nr_units = 0;
+	int nr_groups = 1, nr_units = 0;
 	size_t size_sum, min_unit_size, alloc_size;
 	int upa, max_upa, uninitialized_var(best_upa);	/* units_per_alloc */
 	int last_allocs, group, unit;
@@ -1096,7 +1096,7 @@ struct pcpu_alloc_info * __init pcpu_build_alloc_info(
 
 	/* this function may be called multiple times */
 	memset(group_map, 0, sizeof(group_map));
-	memset(group_cnt, 0, sizeof(group_map));
+	memset(group_cnt, 0, sizeof(group_cnt));
 
 	/*
 	 * Determine min_unit_size, alloc_size and max_upa such that
@@ -1130,7 +1130,6 @@ struct pcpu_alloc_info * __init pcpu_build_alloc_info(
 		}
 		group_map[cpu] = group;
 		group_cnt[group]++;
-		group_cnt_max = max(group_cnt_max, group_cnt[group]);
 	}
 
 	/*
-- 
cgit v1.2.3


From f1f5bda4e9726456bd132e738bf60b727856477e Mon Sep 17 00:00:00 2001
From: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Date: Tue, 8 Jun 2010 08:44:32 +0200
Subject: watchdog: at32ap700x_wdt: register misc device last in probe()
 function

This patch reworks the probe() function in the at32ap700x_wdt driver, this to
make sure the miscdev is properly initialized and the driver is ready to be
accessed.

Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Wim Van sebroeck <wim@iguana.be>
---
 drivers/watchdog/at32ap700x_wdt.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c
index 1cddf92cb9a6..750bc5281d79 100644
--- a/drivers/watchdog/at32ap700x_wdt.c
+++ b/drivers/watchdog/at32ap700x_wdt.c
@@ -346,9 +346,13 @@ static int __init at32_wdt_probe(struct platform_device *pdev)
 	} else {
 		wdt->users = 0;
 	}
-	wdt->miscdev.minor = WATCHDOG_MINOR;
-	wdt->miscdev.name = "watchdog";
-	wdt->miscdev.fops = &at32_wdt_fops;
+
+	wdt->miscdev.minor	= WATCHDOG_MINOR;
+	wdt->miscdev.name	= "watchdog";
+	wdt->miscdev.fops	= &at32_wdt_fops;
+	wdt->miscdev.parent	= &pdev->dev;
+
+	platform_set_drvdata(pdev, wdt);
 
 	if (at32_wdt_settimeout(timeout)) {
 		at32_wdt_settimeout(TIMEOUT_DEFAULT);
@@ -360,17 +364,17 @@ static int __init at32_wdt_probe(struct platform_device *pdev)
 	ret = misc_register(&wdt->miscdev);
 	if (ret) {
 		dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
-		goto err_iounmap;
+		goto err_register;
 	}
 
-	platform_set_drvdata(pdev, wdt);
-	wdt->miscdev.parent = &pdev->dev;
 	dev_info(&pdev->dev,
 		"AT32AP700X WDT at 0x%p, timeout %d sec (nowayout=%d)\n",
 		wdt->regs, wdt->timeout, nowayout);
 
 	return 0;
 
+err_register:
+	platform_set_drvdata(pdev, NULL);
 err_iounmap:
 	iounmap(wdt->regs);
 err_free:
-- 
cgit v1.2.3


From 720a3aeb7373cb49cf222d5f12e121f78d3d4410 Mon Sep 17 00:00:00 2001
From: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Thu, 17 Jun 2010 08:37:44 -0300
Subject: perf session: Remove threads from tree on PERF_RECORD_EXIT
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Move them to a session->dead_threads list just like we do with maps that
are replaced, because we may have hist_entries pointing to them.

This fixes a bug when inserting maps for a new thread that reused the
TID, mixing maps for two different threads, causing an endless loop.

The code for insering maps should be made more robust but for .35 this
is the minimalistic patch.

Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
 tools/perf/util/event.c   |  4 +++-
 tools/perf/util/session.c | 11 +++++++++++
 tools/perf/util/session.h |  2 ++
 tools/perf/util/thread.h  |  5 ++++-
 4 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index 1f08f008d289..2fbf6a463c81 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -538,8 +538,10 @@ int event__process_task(event_t *self, struct perf_session *session)
 	dump_printf("(%d:%d):(%d:%d)\n", self->fork.pid, self->fork.tid,
 		    self->fork.ppid, self->fork.ptid);
 
-	if (self->header.type == PERF_RECORD_EXIT)
+	if (self->header.type == PERF_RECORD_EXIT) {
+		perf_session__remove_thread(session, thread);
 		return 0;
+	}
 
 	if (thread == NULL || parent == NULL ||
 	    thread__fork(thread, parent) < 0) {
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 8f83a1835766..c422cd676313 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -90,6 +90,7 @@ struct perf_session *perf_session__new(const char *filename, int mode, bool forc
 
 	memcpy(self->filename, filename, len);
 	self->threads = RB_ROOT;
+	INIT_LIST_HEAD(&self->dead_threads);
 	self->hists_tree = RB_ROOT;
 	self->last_match = NULL;
 	self->mmap_window = 32;
@@ -131,6 +132,16 @@ void perf_session__delete(struct perf_session *self)
 	free(self);
 }
 
+void perf_session__remove_thread(struct perf_session *self, struct thread *th)
+{
+	rb_erase(&th->rb_node, &self->threads);
+	/*
+	 * We may have references to this thread, for instance in some hist_entry
+	 * instances, so just move them to a separate list.
+	 */
+	list_add_tail(&th->node, &self->dead_threads);
+}
+
 static bool symbol__match_parent_regex(struct symbol *sym)
 {
 	if (sym->name && !regexec(&parent_regex, sym->name, 0, NULL, 0))
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index 55c6881b218d..9fa0fc2a863f 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -26,6 +26,7 @@ struct perf_session {
 	unsigned long		size;
 	unsigned long		mmap_window;
 	struct rb_root		threads;
+	struct list_head	dead_threads;
 	struct thread		*last_match;
 	struct machine		host_machine;
 	struct rb_root		machines;
@@ -99,6 +100,7 @@ int perf_session__create_kernel_maps(struct perf_session *self);
 
 int do_read(int fd, void *buf, size_t size);
 void perf_session__update_sample_type(struct perf_session *self);
+void perf_session__remove_thread(struct perf_session *self, struct thread *th);
 
 static inline
 struct machine *perf_session__find_host_machine(struct perf_session *self)
diff --git a/tools/perf/util/thread.h b/tools/perf/util/thread.h
index 1dfd9ff8bdcd..ee6bbcf277ca 100644
--- a/tools/perf/util/thread.h
+++ b/tools/perf/util/thread.h
@@ -6,7 +6,10 @@
 #include "symbol.h"
 
 struct thread {
-	struct rb_node		rb_node;
+	union {
+		struct rb_node	 rb_node;
+		struct list_head node;
+	};
 	struct map_groups	mg;
 	pid_t			pid;
 	char			shortname[3];
-- 
cgit v1.2.3


From aabef8b240880439b91574c9a9e33dcc44bfd8c7 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Thu, 17 Jun 2010 08:56:05 -0700
Subject: bnx2: fix dma_get_ops compilation breakage

This removes dma_get_ops() prefetch optimization in bnx2.

bnx2 uses dma_get_ops() to see if dma_sync_single_for_cpu() is
noop. bnx2 does prefetch if it's noop.

But dma_get_ops() isn't available on all the architectures (only the
architectures that uses dma_map_ops struct have it). Using
dma_get_ops() in drivers leads to compilation breakage on many
architectures.

This patch removes dma_get_ops() and changes bnx2 to do prefetch on
all the architectures. This adds useless prefetch on non-coherent
architectures but this is harmless. It is also unlikely to cause the
performance drop.

[ Remove now unused local variable 'pdev' -DaveM ]

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 949d7a9dcf92..117432222a09 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -3073,7 +3073,6 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 	u16 hw_cons, sw_cons, sw_ring_cons, sw_prod, sw_ring_prod;
 	struct l2_fhdr *rx_hdr;
 	int rx_pkt = 0, pg_ring_used = 0;
-	struct pci_dev *pdev = bp->pdev;
 
 	hw_cons = bnx2_get_hw_rx_cons(bnapi);
 	sw_cons = rxr->rx_cons;
@@ -3099,12 +3098,10 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		skb = rx_buf->skb;
 		prefetchw(skb);
 
-		if (!get_dma_ops(&pdev->dev)->sync_single_for_cpu) {
-			next_rx_buf =
-				&rxr->rx_buf_ring[
-					RX_RING_IDX(NEXT_RX_BD(sw_cons))];
-			prefetch(next_rx_buf->desc);
-		}
+		next_rx_buf =
+			&rxr->rx_buf_ring[RX_RING_IDX(NEXT_RX_BD(sw_cons))];
+		prefetch(next_rx_buf->desc);
+
 		rx_buf->skb = NULL;
 
 		dma_addr = dma_unmap_addr(rx_buf, mapping);
-- 
cgit v1.2.3


From cb1cb1780f2025a7d612de09131bf6530f80fb1a Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Thu, 17 Jun 2010 17:40:57 +0200
Subject: ACPI / PM: Do not enable GPEs for system wakeup in advance

After commit 9630bdd9b15d2f489c646d8bc04b60e53eb5ec78
(ACPI: Use GPE reference counting to support shared GPEs) the wakeup
enable mask bits of GPEs are set as soon as the GPEs are enabled to
wake up the system.  Unfortunately, this leads to a regression
reported by Michal Hocko, where a system is woken up from ACPI S5 by
a device that is not supposed to do that, because the wakeup enable
mask bit of this device's GPE is always set when
acpi_enter_sleep_state() calls acpi_hw_enable_all_wakeup_gpes(),
although it should only be set if the device is supposed to wake up
the system from the target state.

To work around this issue, rework the ACPI power management code so
that GPEs are not enabled to wake up the system upfront, but only
during a system state transition when the target state of the system
is known.  [Of course, this means that the reference counting of
"wakeup" GPEs doesn't really make sense and it is sufficient to
set/unset the wakeup mask bits for them during system sleep
transitions.  This will allow us to simplify the GPE handling code
quite a bit, but that change is too intrusive for 2.6.35.]

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15951

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/button.c |  4 ++--
 drivers/acpi/wakeup.c | 20 +++++++-------------
 2 files changed, 9 insertions(+), 15 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index fd51c4ab4829..7d857dabdde4 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -425,7 +425,7 @@ static int acpi_button_add(struct acpi_device *device)
 		/* Button's GPE is run-wake GPE */
 		acpi_enable_gpe(device->wakeup.gpe_device,
 				device->wakeup.gpe_number,
-				ACPI_GPE_TYPE_WAKE_RUN);
+				ACPI_GPE_TYPE_RUNTIME);
 		device->wakeup.run_wake_count++;
 		device->wakeup.state.enabled = 1;
 	}
@@ -449,7 +449,7 @@ static int acpi_button_remove(struct acpi_device *device, int type)
 	if (device->wakeup.flags.valid) {
 		acpi_disable_gpe(device->wakeup.gpe_device,
 				device->wakeup.gpe_number,
-				ACPI_GPE_TYPE_WAKE_RUN);
+				ACPI_GPE_TYPE_RUNTIME);
 		device->wakeup.run_wake_count--;
 		device->wakeup.state.enabled = 0;
 	}
diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c
index 4b9d339a6e28..388747a7ef4f 100644
--- a/drivers/acpi/wakeup.c
+++ b/drivers/acpi/wakeup.c
@@ -64,16 +64,13 @@ void acpi_enable_wakeup_device(u8 sleep_state)
 		struct acpi_device *dev =
 			container_of(node, struct acpi_device, wakeup_list);
 
-		if (!dev->wakeup.flags.valid)
-			continue;
-
-		if ((!dev->wakeup.state.enabled && !dev->wakeup.prepare_count)
+		if (!dev->wakeup.flags.valid || !dev->wakeup.state.enabled
 		    || sleep_state > (u32) dev->wakeup.sleep_state)
 			continue;
 
 		/* The wake-up power should have been enabled already. */
-		acpi_set_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
-				ACPI_GPE_ENABLE);
+		acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
+				ACPI_GPE_TYPE_WAKE);
 	}
 }
 
@@ -96,6 +93,8 @@ void acpi_disable_wakeup_device(u8 sleep_state)
 		    || (sleep_state > (u32) dev->wakeup.sleep_state))
 			continue;
 
+		acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
+				ACPI_GPE_TYPE_WAKE);
 		acpi_disable_wakeup_device_power(dev);
 	}
 }
@@ -109,13 +108,8 @@ int __init acpi_wakeup_device_init(void)
 		struct acpi_device *dev = container_of(node,
 						       struct acpi_device,
 						       wakeup_list);
-		/* In case user doesn't load button driver */
-		if (!dev->wakeup.flags.always_enabled ||
-		    dev->wakeup.state.enabled)
-			continue;
- 		acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
- 				ACPI_GPE_TYPE_WAKE);
-		dev->wakeup.state.enabled = 1;
+		if (dev->wakeup.flags.always_enabled)
+			dev->wakeup.state.enabled = 1;
 	}
 	mutex_unlock(&acpi_device_lock);
 	return 0;
-- 
cgit v1.2.3


From 5ffc88819c84098e3f39185a38f8f7f7f8b210df Mon Sep 17 00:00:00 2001
From: Ian Munsie <imunsie@au1.ibm.com>
Date: Wed, 9 Jun 2010 18:38:00 +1000
Subject: perf record: prevent kill(0, SIGTERM);
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

At exit, perf record will kill the process it was profiling by sending a
SIGTERM to child_pid (if it had been initialised), but in certain situations
child_pid may be 0 and perf would mistakenly kill more processes than intended.

child_pid is set to the return of fork() to either 0 or the pid of the child.
Ordinarily this would not present an issue as the child calls execvp to spawn
the process to be profiled and would therefore never run it's sig_atexit and
never attempt to kill pid 0.

However, if a nonexistant binary had been passed in to perf record the call to
execvp would fail and child_pid would be left set to 0. The child would then
exit and it's atexit handler, finding that child_pid was initialised to 0,
would call kill(0, SIGTERM), resulting in every process within it's process
group being killed.

In the case that perf was being run directly from the shell this typically
would not be an issue as the shell isolates the process.  However, if perf was
being called from another program it could kill unexpected processes, which may
even include X.

This patch changes the logic of the test for whether child_pid was initialised
to only consider positive pids as valid, thereby never attempting to kill pid
0.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1276072680-17378-1-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
 tools/perf/builtin-record.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index dc3435e18bde..711745f56bba 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -193,7 +193,7 @@ static void sig_handler(int sig)
 
 static void sig_atexit(void)
 {
-	if (child_pid != -1)
+	if (child_pid > 0)
 		kill(child_pid, SIGTERM);
 
 	if (signr == -1)
-- 
cgit v1.2.3


From 3310d4d38fbc514e7b18bd3b1eea8effdd63b5aa Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <peterz@infradead.org>
Date: Thu, 17 Jun 2010 18:02:37 +0200
Subject: nohz: Fix nohz ratelimit

Chris Wedgwood reports that 39c0cbe (sched: Rate-limit nohz) causes a
serial console regression, unresponsiveness, and indeed it does. The
reason is that the nohz code is skipped even when the tick was already
stopped before the nohz_ratelimit(cpu) condition changed.

Move the nohz_ratelimit() check to the other conditions which prevent
long idle sleeps.

Reported-by: Chris Wedgwood <cw@f00f.org>
Tested-by: Brian Bloniarz <bmb@athenacr.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg KH <gregkh@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Jef Driesen <jefdriesen@telenet.be>
LKML-Reference: <1276790557.27822.516.camel@twins>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/time/tick-sched.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 1d7b9bc1c034..783fbadf2202 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -315,9 +315,6 @@ void tick_nohz_stop_sched_tick(int inidle)
 		goto end;
 	}
 
-	if (nohz_ratelimit(cpu))
-		goto end;
-
 	ts->idle_calls++;
 	/* Read jiffies and the time when jiffies were updated last */
 	do {
@@ -328,7 +325,7 @@ void tick_nohz_stop_sched_tick(int inidle)
 	} while (read_seqretry(&xtime_lock, seq));
 
 	if (rcu_needs_cpu(cpu) || printk_needs_cpu(cpu) ||
-	    arch_needs_cpu(cpu)) {
+	    arch_needs_cpu(cpu) || nohz_ratelimit(cpu)) {
 		next_jiffies = last_jiffies + 1;
 		delta_jiffies = 1;
 	} else {
-- 
cgit v1.2.3


From 25442e06d20aaba7d7b16438078a562b3e4cf19b Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Tue, 15 Jun 2010 06:14:12 +0000
Subject: bridge: fdb cleanup runs too often

It is common in end-node, non STP bridges to set forwarding
delay to zero; which causes the forwarding database cleanup
to run every clock tick. Change to run only as soon as needed
or at next ageing timer interval which ever is sooner.

Use round_jiffies_up macro rather than attempting round up
by changing value.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/bridge/br_fdb.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c
index 26637439965b..b01dde35a69e 100644
--- a/net/bridge/br_fdb.c
+++ b/net/bridge/br_fdb.c
@@ -128,7 +128,7 @@ void br_fdb_cleanup(unsigned long _data)
 {
 	struct net_bridge *br = (struct net_bridge *)_data;
 	unsigned long delay = hold_time(br);
-	unsigned long next_timer = jiffies + br->forward_delay;
+	unsigned long next_timer = jiffies + br->ageing_time;
 	int i;
 
 	spin_lock_bh(&br->hash_lock);
@@ -149,9 +149,7 @@ void br_fdb_cleanup(unsigned long _data)
 	}
 	spin_unlock_bh(&br->hash_lock);
 
-	/* Add HZ/4 to ensure we round the jiffies upwards to be after the next
-	 * timer, otherwise we might round down and will have no-op run. */
-	mod_timer(&br->gc_timer, round_jiffies(next_timer + HZ/4));
+	mod_timer(&br->gc_timer, round_jiffies_up(next_timer));
 }
 
 /* Completely flush all dynamic entries in forwarding database.*/
-- 
cgit v1.2.3


From 3c93717cfa51316e4dbb471e7c0f9d243359d5f8 Mon Sep 17 00:00:00 2001
From: "Alex,Shi" <alex.shi@intel.com>
Date: Thu, 17 Jun 2010 14:08:13 +0800
Subject: sched: Fix over-scheduling bug

Commit e70971591 ("sched: Optimize unused cgroup configuration") introduced
an imbalanced scheduling bug.

If we do not use CGROUP, function update_h_load won't update h_load. When the
system has a large number of tasks far more than logical CPU number, the
incorrect cfs_rq[cpu]->h_load value will cause load_balance() to pull too
many tasks to the local CPU from the busiest CPU. So the busiest CPU keeps
going in a round robin. That will hurt performance.

The issue was found originally by a scientific calculation workload that
developed by Yanmin. With that commit, the workload performance drops
about 40%.

 CPU  before    after

 00   : 2       : 7
 01   : 1       : 7
 02   : 11      : 6
 03   : 12      : 7
 04   : 6       : 6
 05   : 11      : 7
 06   : 10      : 6
 07   : 12      : 7
 08   : 11      : 6
 09   : 12      : 6
 10   : 1       : 6
 11   : 1       : 6
 12   : 6       : 6
 13   : 2       : 6
 14   : 2       : 6
 15   : 1       : 6

Reviewed-by: Yanmin zhang <yanmin.zhang@intel.com>
Signed-off-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1276754893.9452.5442.camel@debian>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/kernel/sched.c b/kernel/sched.c
index 2aaceebd484c..6c9e7c8735bf 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1657,9 +1657,6 @@ static void update_shares(struct sched_domain *sd)
 
 static void update_h_load(long cpu)
 {
-	if (root_task_group_empty())
-		return;
-
 	walk_tg_tree(tg_load_down, tg_nop, (void *)cpu);
 }
 
-- 
cgit v1.2.3


From 9983b6f0cf8263e51bcf4c8a9dc0c1ef175b3c60 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 18 Jun 2010 11:44:31 +0200
Subject: percpu: fix first chunk match in per_cpu_ptr_to_phys()

per_cpu_ptr_to_phys() determines whether the passed in @addr belongs
to the first_chunk or not by just matching the address against the
address range of the base unit (unit0, used by cpu0).  When an adress
from another cpu was passed in, it will always determine that the
address doesn't belong to the first chunk even when it does.  This
makes the function return a bogus physical address which may lead to
crash.

This problem was discovered by Cliff Wickman while investigating a
crash during kdump on a SGI UV system.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Cliff Wickman <cpw@sgi.com>
Tested-by: Cliff Wickman <cpw@sgi.com>
Cc: stable@kernel.org
---
 mm/percpu.c | 31 ++++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)

diff --git a/mm/percpu.c b/mm/percpu.c
index 46485e1b26fc..6470e7710231 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -229,8 +229,8 @@ static int __maybe_unused pcpu_page_idx(unsigned int cpu, int page_idx)
 	return pcpu_unit_map[cpu] * pcpu_unit_pages + page_idx;
 }
 
-static unsigned long __maybe_unused pcpu_chunk_addr(struct pcpu_chunk *chunk,
-						unsigned int cpu, int page_idx)
+static unsigned long pcpu_chunk_addr(struct pcpu_chunk *chunk,
+				     unsigned int cpu, int page_idx)
 {
 	return (unsigned long)chunk->base_addr + pcpu_unit_offsets[cpu] +
 		(page_idx << PAGE_SHIFT);
@@ -978,7 +978,32 @@ bool is_kernel_percpu_address(unsigned long addr)
  */
 phys_addr_t per_cpu_ptr_to_phys(void *addr)
 {
-	if (pcpu_addr_in_first_chunk(addr)) {
+	void __percpu *base = __addr_to_pcpu_ptr(pcpu_base_addr);
+	bool in_first_chunk = false;
+	unsigned long first_start, first_end;
+	unsigned int cpu;
+
+	/*
+	 * The following test on first_start/end isn't strictly
+	 * necessary but will speed up lookups of addresses which
+	 * aren't in the first chunk.
+	 */
+	first_start = pcpu_chunk_addr(pcpu_first_chunk, pcpu_first_unit_cpu, 0);
+	first_end = pcpu_chunk_addr(pcpu_first_chunk, pcpu_last_unit_cpu,
+				    pcpu_unit_pages);
+	if ((unsigned long)addr >= first_start &&
+	    (unsigned long)addr < first_end) {
+		for_each_possible_cpu(cpu) {
+			void *start = per_cpu_ptr(base, cpu);
+
+			if (addr >= start && addr < start + pcpu_unit_size) {
+				in_first_chunk = true;
+				break;
+			}
+		}
+	}
+
+	if (in_first_chunk) {
 		if ((unsigned long)addr < VMALLOC_START ||
 		    (unsigned long)addr >= VMALLOC_END)
 			return __pa(addr);
-- 
cgit v1.2.3


From b27759f880018b0cd43543dc94c921341b64b5ec Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Fri, 18 Jun 2010 17:04:22 +0200
Subject: PCI/PM: Do not use native PCIe PME by default
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Commit c7f486567c1d0acd2e4166c47069835b9f75e77b
(PCI PM: PCIe PME root port service driver) causes the native PCIe
PME signaling to be used by default, if the BIOS allows the kernel to
control the standard configuration registers of PCIe root ports.
However, the native PCIe PME is coupled to the native PCIe hotplug
and calling pcie_pme_acpi_setup() makes some BIOSes expect that
the native PCIe hotplug will be used as well.  That, in turn, causes
problems to appear on systems where the PCIe hotplug driver is not
loaded.  The usual symptom, as reported by Jaroslav Kameník and
others, is that the ACPI GPE associated with PCIe hotplug keeps
firing continuously causing kacpid to take substantial percentage
of CPU time.

To work around this issue, change the default so that the native
PCIe PME signaling is only used if directly requested with the help
of the pcie_pme= command line switch.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15924 , which is
a listed regression from 2.6.33.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Jaroslav Kameník <jaroslav@kamenik.cz>
Tested-by: Antoni Grzymala <antekgrzymala@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 Documentation/kernel-parameters.txt |  4 +++-
 drivers/pci/pcie/pme/pcie_pme.c     | 19 +++++++++++++------
 2 files changed, 16 insertions(+), 7 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 1808f1157f30..82d6aeb5228f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2048,7 +2048,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			WARNING: Forcing ASPM on may cause system lockups.
 
 	pcie_pme=	[PCIE,PM] Native PCIe PME signaling options:
-		off	Do not use native PCIe PME signaling.
+			Format: {auto|force}[,nomsi]
+		auto	Use native PCIe PME signaling if the BIOS allows the
+			kernel to control PCIe config registers of root ports.
 		force	Use native PCIe PME signaling even if the BIOS refuses
 			to allow the kernel to control the relevant PCIe config
 			registers.
diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c
index aac285a16b62..d672a0a63816 100644
--- a/drivers/pci/pcie/pme/pcie_pme.c
+++ b/drivers/pci/pcie/pme/pcie_pme.c
@@ -34,7 +34,7 @@
  * being registered.  Consequently, the interrupt-based PCIe PME signaling will
  * not be used by any PCIe root ports in that case.
  */
-static bool pcie_pme_disabled;
+static bool pcie_pme_disabled = true;
 
 /*
  * The PCI Express Base Specification 2.0, Section 6.1.8, states the following:
@@ -64,12 +64,19 @@ bool pcie_pme_msi_disabled;
 
 static int __init pcie_pme_setup(char *str)
 {
-	if (!strcmp(str, "off"))
-		pcie_pme_disabled = true;
-	else if (!strcmp(str, "force"))
+	if (!strncmp(str, "auto", 4))
+		pcie_pme_disabled = false;
+	else if (!strncmp(str, "force", 5))
 		pcie_pme_force_enable = true;
-	else if (!strcmp(str, "nomsi"))
-		pcie_pme_msi_disabled = true;
+
+	str = strchr(str, ',');
+	if (str) {
+		str++;
+		str += strspn(str, " \t");
+		if (*str && !strcmp(str, "nomsi"))
+			pcie_pme_msi_disabled = true;
+	}
+
 	return 1;
 }
 __setup("pcie_pme=", pcie_pme_setup);
-- 
cgit v1.2.3


From b6855772f4a22c4fbdd4fcaceff5c8a527035123 Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Fri, 18 Jun 2010 13:15:23 -0400
Subject: ath5k: initialize ah->ah_current_channel

ath5k assumes ah_current_channel is always a valid pointer in
several places, but a newly created interface may not have a
channel.  To avoid null pointer dereferences, set it up to point
to the first available channel until later reconfigured.

This fixes the following oops:
$ rmmod ath5k
$ insmod ath5k
$ iw phy0 set distance 11000

BUG: unable to handle kernel NULL pointer dereference at 00000006
IP: [<d0a1ff24>] ath5k_hw_set_coverage_class+0x74/0x1b0 [ath5k]
*pde = 00000000
Oops: 0000 [#1]
last sysfs file: /sys/devices/pci0000:00/0000:00:0e.0/ieee80211/phy0/index
Modules linked in: usbhid option usb_storage usbserial usblp evdev lm90
scx200_acb i2c_algo_bit i2c_dev i2c_core via_rhine ohci_hcd ne2k_pci
8390 leds_alix2 xt_IMQ imq nf_nat_tftp nf_conntrack_tftp nf_nat_irc nf_cc

Pid: 1597, comm: iw Not tainted (2.6.32.14 #8)
EIP: 0060:[<d0a1ff24>] EFLAGS: 00010296 CPU: 0
EIP is at ath5k_hw_set_coverage_class+0x74/0x1b0 [ath5k]
EAX: 000000c2 EBX: 00000000 ECX: ffffffff EDX: c12d2080
ESI: 00000019 EDI: cf8c0000 EBP: d0a30edc ESP: cfa09bf4
  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process iw (pid: 1597, ti=cfa09000 task=cf88a000 task.ti=cfa09000)
Stack:
  d0a34f35 d0a353f8 d0a30edc 000000fe cf8c0000 00000000 1900063d cfa8c9e0
<0> cfa8c9e8 cfa8c0c0 cfa8c000 d0a27f0c 199d84b4 cfa8c200 00000010 d09bfdc7
<0> 00000000 00000000 ffffffff d08e0d28 cf9263c0 00000001 cfa09cc4 00000000
Call Trace:
  [<d0a27f0c>] ? ath5k_hw_attach+0xc8c/0x3c10 [ath5k]
  [<d09bfdc7>] ? __ieee80211_request_smps+0x1347/0x1580 [mac80211]
  [<d08e0d28>] ? nl80211_send_scan_start+0x7b8/0x4520 [cfg80211]
  [<c10f5db9>] ? nla_parse+0x59/0xc0
  [<c11ca8d9>] ? genl_rcv_msg+0x169/0x1a0
  [<c11ca770>] ? genl_rcv_msg+0x0/0x1a0
  [<c11c7e68>] ? netlink_rcv_skb+0x38/0x90
  [<c11c9649>] ? genl_rcv+0x19/0x30
  [<c11c7c03>] ? netlink_unicast+0x1b3/0x220
  [<c11c893e>] ? netlink_sendmsg+0x26e/0x290
  [<c11a409e>] ? sock_sendmsg+0xbe/0xf0
  [<c1032780>] ? autoremove_wake_function+0x0/0x50
  [<c104d846>] ? __alloc_pages_nodemask+0x106/0x530
  [<c1074933>] ? do_lookup+0x53/0x1b0
  [<c10766f9>] ? __link_path_walk+0x9b9/0x9e0
  [<c11acab0>] ? verify_iovec+0x50/0x90
  [<c11a42b1>] ? sys_sendmsg+0x1e1/0x270
  [<c1048e50>] ? find_get_page+0x10/0x50
  [<c104a96f>] ? filemap_fault+0x5f/0x370
  [<c1059159>] ? __do_fault+0x319/0x370
  [<c11a55b4>] ? sys_socketcall+0x244/0x290
  [<c101962c>] ? do_page_fault+0x1ec/0x270
  [<c1019440>] ? do_page_fault+0x0/0x270
  [<c1002ae5>] ? syscall_call+0x7/0xb
Code: 00 b8 fe 00 00 00 b9 f8 53 a3 d0 89 5c 24 14 89 7c 24 10 89 44 24
0c 89 6c 24 08 89 4c 24 04 c7 04 24 35 4f a3 d0 e8 7c 30 60 f0 <0f> b7
43 06 ba 06 00 00 00 a8 10 75 0e 83 e0 20 83 f8 01 19 d2
EIP: [<d0a1ff24>] ath5k_hw_set_coverage_class+0x74/0x1b0 [ath5k] SS:ESP
0068:cfa09bf4
CR2: 0000000000000006
---[ end trace 54f73d6b10ceb87b ]---

Cc: stable@kernel.org
Reported-by: Steve Brown <sbrown@cortland.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/attach.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index e0c244b02f05..31c008042bfe 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -126,6 +126,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
 	ah->ah_ant_mode = AR5K_ANTMODE_DEFAULT;
 	ah->ah_noise_floor = -95;	/* until first NF calibration is run */
 	sc->ani_state.ani_mode = ATH5K_ANI_MODE_AUTO;
+	ah->ah_current_channel = &sc->channels[0];
 
 	/*
 	 * Find the mac version
-- 
cgit v1.2.3


From 124482935fb7fb9303c8a8ab930149c6a93d9910 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Fri, 18 Jun 2010 23:09:00 +0200
Subject: x86: Fix vsyscall on gcc 4.5 with -Os

This fixes the -Os breaks with gcc 4.5 bug.  rdtsc_barrier needs to be
force inlined, otherwise user space will jump into kernel space and
kill init.

This also addresses http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44129
I believe.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <20100618210859.GA10913@basil.fritz.box>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@kernel.org>
---
 arch/x86/include/asm/system.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index b8fe48ee2ed9..e7f4d33c55ed 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -451,7 +451,7 @@ void stop_this_cpu(void *dummy);
  *
  * (Could use an alternative three way for this if there was one.)
  */
-static inline void rdtsc_barrier(void)
+static __always_inline void rdtsc_barrier(void)
 {
 	alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
 	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
-- 
cgit v1.2.3


From eefc2d9e3d4f8820f2c128a0e44a23de28b1ed64 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Sun, 20 Jun 2010 09:22:31 +0200
Subject: hwmon: (k10temp) Do not blacklist known working CPU models

When detecting AM2+ or AM3 socket with DDR2, only blacklist cores
which are known to exist in AM2+ format.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: stable@kernel.org
---
 drivers/hwmon/k10temp.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 099a2138cdf6..da5a2404cd3e 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -112,11 +112,21 @@ static bool __devinit has_erratum_319(struct pci_dev *pdev)
 	if (pkg_type != CPUID_PKGTYPE_AM2R2_AM3)
 		return false;
 
-	/* Differentiate between AM2+ (bad) and AM3 (good) */
+	/* DDR3 memory implies socket AM3, which is good */
 	pci_bus_read_config_dword(pdev->bus,
 				  PCI_DEVFN(PCI_SLOT(pdev->devfn), 2),
 				  REG_DCT0_CONFIG_HIGH, &reg_dram_cfg);
-	return !(reg_dram_cfg & DDR3_MODE);
+	if (reg_dram_cfg & DDR3_MODE)
+		return false;
+
+	/*
+	 * Unfortunately it is possible to run a socket AM3 CPU with DDR2
+	 * memory. We blacklist all the cores which do exist in socket AM2+
+	 * format. It still isn't perfect, as RB-C2 cores exist in both AM2+
+	 * and AM3 formats, but that's the best we can do.
+	 */
+	return boot_cpu_data.x86_model < 4 ||
+	       (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask <= 2);
 }
 
 static int __devinit k10temp_probe(struct pci_dev *pdev,
-- 
cgit v1.2.3


From 0e6c7870856c7fb4ee054d28ac253b2d3d0c7e36 Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Sun, 20 Jun 2010 09:22:31 +0200
Subject: hwmon: (i5k_amb) Fix sysfs attribute for lockdep

i5k_amb.ko uses dynamically allocated memory (by kmalloc) for
attributes passed to sysfs. So, sysfs_attr_init() should be called
for working happy with lockdep.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org [2.6.34 only]
---
 drivers/hwmon/i5k_amb.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index e880e2c3871d..937983407e2a 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -289,6 +289,7 @@ static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 			iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
 			iattr->s_attr.dev_attr.show = show_label;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
@@ -303,6 +304,7 @@ static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 			iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
 			iattr->s_attr.dev_attr.show = show_amb_temp;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
@@ -318,6 +320,7 @@ static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 			iattr->s_attr.dev_attr.show = show_amb_min;
 			iattr->s_attr.dev_attr.store = store_amb_min;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
@@ -333,6 +336,7 @@ static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 			iattr->s_attr.dev_attr.show = show_amb_mid;
 			iattr->s_attr.dev_attr.store = store_amb_mid;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
@@ -348,6 +352,7 @@ static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 			iattr->s_attr.dev_attr.show = show_amb_max;
 			iattr->s_attr.dev_attr.store = store_amb_max;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
@@ -362,6 +367,7 @@ static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 			iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
 			iattr->s_attr.dev_attr.show = show_amb_alarm;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
-- 
cgit v1.2.3


From cd4de21f7e65a8cd04860f5661b3c18648ee52a1 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Sun, 20 Jun 2010 09:22:32 +0200
Subject: hwmon: (k8temp) Bypass core swapping on single-core processors

Commit a2e066bba2aad6583e3ff648bf28339d6c9f0898 introduced core
swapping for CPU models 64 and later. I recently had a report about
a Sempron 3200+, model 95, for which this patch broke temperature
reading. It happens that this is a single-core processor, so the
effect of the swapping was to read a temperature value for a core
that didn't exist, leading to an incorrect value (-49 degrees C.)

Disabling core swapping on singe-core processors should fix this.

Additional comment from Andreas:

The BKDG says

  Thermal Sensor Core Select (ThermSenseCoreSel)-Bit 2. This bit
  selects the CPU whose temperature is reported in the CurTemp
  field. This bit only applies to dual core processors. For
  single core processors CPU0 Thermal Sensor is always selected.

k8temp_probe() correctly detected that SEL_CORE can't be used on single
core CPU. Thus k8temp did never update the temperature values stored
in temp[1][x] and -49 degrees was reported. For single core CPUs we
must use the values read into temp[0][x].

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Rick Moritz <rhavin@gmx.net>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: stable@kernel.org
---
 drivers/hwmon/k8temp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index 0ceb6d6200a3..f26acdb11681 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -120,7 +120,7 @@ static ssize_t show_temp(struct device *dev,
 	int temp;
 	struct k8temp_data *data = k8temp_update_device(dev);
 
-	if (data->swap_core_select)
+	if (data->swap_core_select && (data->sensorsp & SEL_CORE))
 		core = core ? 0 : 1;
 
 	temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
-- 
cgit v1.2.3


From 890ffedc7c3e95595926379e28ad2e16e7d7c613 Mon Sep 17 00:00:00 2001
From: Thomas Backlund <tmb@mandriva.org>
Date: Sat, 19 Jun 2010 16:32:25 +0300
Subject: x86: Fix rebooting on Dell Precision WorkStation T7400

Dell Precision WorkStation T7400 freezes on reboot unless
reboot=b is used.

Reference: https://qa.mandriva.com/show_bug.cgi?id=58017

Signed-off-by: Thomas Backlund <tmb@mandriva.org>
LKML-Reference: <4C1CC6E9.6000701@mandriva.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/reboot.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 8e1aac86b50c..e3af342fe83a 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -228,6 +228,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T5400"),
 		},
 	},
+	{	/* Handle problems with rebooting on Dell T7400's */
+		.callback = set_bios_reboot,
+		.ident = "Dell Precision T7400",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T7400"),
+		},
+	},
 	{	/* Handle problems with rebooting on HP laptops */
 		.callback = set_bios_reboot,
 		.ident = "HP Compaq Laptop",
-- 
cgit v1.2.3


From 0e6f989ba83e6fa64e979d3488f01670b8be7959 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sun, 20 Jun 2010 11:24:54 +0000
Subject: arch/sh/mm: Eliminate a double lock

The function begins and ends with a read_lock.  The latter is changed to a
read_unlock.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@locked@
expression E1;
position p;
@@

read_lock(E1@p,...);

@r exists@
expression x <= locked.E1;
expression locked.E1;
expression E2;
identifier lock;
position locked.p,p1,p2;
@@

*lock@p1 (E1@p,...);
... when != E1
    when != \(x = E2\|&x\)
*lock@p2 (E1,...);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/pmb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 18623ba751b3..6379091a1647 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -770,7 +770,7 @@ static void __init pmb_resize(void)
 		spin_unlock_irqrestore(&pmbe->lock, flags);
 	}
 
-	read_lock(&pmb_rwlock);
+	read_unlock(&pmb_rwlock);
 }
 #endif
 
-- 
cgit v1.2.3


From 272cbc98cfbdd30cff37a35f8ad8f1b737288e88 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Mon, 21 Jun 2010 17:03:21 +0200
Subject: ALSA: usb/endpoint, fix dangling pointer use

Stanse found that in snd_usb_parse_audio_endpoints, there is a
dangling pointer dereference. When snd_usb_parse_audio_format fails,
fp is freed, and continue invoked. On the next loop, there is
"fp && fp->altsetting == 1 && fp->channels == 1" test, but fp is set
from the last iteration (but is bogus) and thus ilegally dereferenced.

Set fp to NULL before "continue".

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/endpoint.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 9593b91452b9..6f6596cf2b19 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -427,6 +427,7 @@ int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
 		if (snd_usb_parse_audio_format(chip, fp, format, fmt, stream, alts) < 0) {
 			kfree(fp->rate_table);
 			kfree(fp);
+			fp = NULL;
 			continue;
 		}
 
-- 
cgit v1.2.3


From b70e4f0529c089b00d0a6da13106db4de1ada4c7 Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzhangjin@gmail.com>
Date: Mon, 21 Jun 2010 19:09:09 +0800
Subject: tracing: Fix undeclared ENOSYS in include/linux/tracepoint.h

The header file include/linux/tracepoint.h may be included without
include/linux/errno.h and then the compiler will fail on building for
undelcared ENOSYS. This patch fixes this problem via including <linux/errno.h>
to include/linux/tracepoint.h.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
LKML-Reference: <1277118549-622-1-git-send-email-wuzhangjin@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 include/linux/tracepoint.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index 9a59d1f98cd4..103d1b61aacb 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -14,6 +14,7 @@
  * See the file COPYING for more details.
  */
 
+#include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/rcupdate.h>
 
-- 
cgit v1.2.3


From ade2d3db21b0625f9528bcd6f1656dd7c8d0fe08 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 21 Jun 2010 03:44:50 +0000
Subject: NET: MIPSsim: Fix modpost warning.

$ make CONFIG_DEBUG_SECTION_MISMATCH=y
[...]
WARNING: drivers/net/built-in.o(.data+0x0): Section mismatch in reference from the variable mipsnet_driver to the function .init.text:mipsnet_probe()
The variable mipsnet_driver references
the function __init mipsnet_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
[...]

Fixed by making mipsnet_probe __devinit.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/mipsnet.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/mipsnet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/mipsnet.c b/drivers/net/mipsnet.c
index 8e9704f5c122..869f0ea43a5b 100644
--- a/drivers/net/mipsnet.c
+++ b/drivers/net/mipsnet.c
@@ -247,7 +247,7 @@ static const struct net_device_ops mipsnet_netdev_ops = {
 	.ndo_set_mac_address	= eth_mac_addr,
 };
 
-static int __init mipsnet_probe(struct platform_device *dev)
+static int __devinit mipsnet_probe(struct platform_device *dev)
 {
 	struct net_device *netdev;
 	int err;
-- 
cgit v1.2.3


From 13fea6d4f73942e6961aec97ba4c593619d18f6f Mon Sep 17 00:00:00 2001
From: Helge Deller <deller@gmx.de>
Date: Mon, 21 Jun 2010 13:50:18 -0700
Subject: lasi82596: fix netdev_mc_count conversion

Fix commit 4cd24eaf0 (net: use netdev_mc_count and netdev_mc_empty when
appropriate)

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/lib82596.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index ce5d6e909218..c27f4291b350 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -1343,7 +1343,7 @@ static void set_multicast_list(struct net_device *dev)
 	DEB(DEB_MULTI,
 	    printk(KERN_DEBUG
 		   "%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
-		   dev->name, dev->mc_count,
+		   dev->name, netdev_mc_count(dev),
 		   dev->flags & IFF_PROMISC ? "ON" : "OFF",
 		   dev->flags & IFF_ALLMULTI ? "ON" : "OFF"));
 
-- 
cgit v1.2.3


From 26cde9f7e2747b6d254b704594eed87ab959afa5 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Tue, 15 Jun 2010 01:52:25 +0000
Subject: udp: Fix bogus UFO packet generation

It has been reported that the new UFO software fallback path
fails under certain conditions with NFS.  I tracked the problem
down to the generation of UFO packets that are smaller than the
MTU.  The software fallback path simply discards these packets.

This patch fixes the problem by not generating such packets on
the UFO path.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/ip_output.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 9a4a6c96cb0d..041d41df1224 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -873,8 +873,10 @@ int ip_append_data(struct sock *sk,
 	    !exthdrlen)
 		csummode = CHECKSUM_PARTIAL;
 
+	skb = skb_peek_tail(&sk->sk_write_queue);
+
 	inet->cork.length += length;
-	if (((length> mtu) || !skb_queue_empty(&sk->sk_write_queue)) &&
+	if (((length > mtu) || (skb && skb_is_gso(skb))) &&
 	    (sk->sk_protocol == IPPROTO_UDP) &&
 	    (rt->u.dst.dev->features & NETIF_F_UFO)) {
 		err = ip_ufo_append_data(sk, getfrag, from, length, hh_len,
@@ -892,7 +894,7 @@ int ip_append_data(struct sock *sk,
 	 * adding appropriate IP header.
 	 */
 
-	if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL)
+	if (!skb)
 		goto alloc_new_skb;
 
 	while (length > 0) {
@@ -1121,7 +1123,8 @@ ssize_t	ip_append_page(struct sock *sk, struct page *page,
 		return -EINVAL;
 
 	inet->cork.length += size;
-	if ((sk->sk_protocol == IPPROTO_UDP) &&
+	if ((size + skb->len > mtu) &&
+	    (sk->sk_protocol == IPPROTO_UDP) &&
 	    (rt->u.dst.dev->features & NETIF_F_UFO)) {
 		skb_shinfo(skb)->gso_size = mtu - fragheaderlen;
 		skb_shinfo(skb)->gso_type = SKB_GSO_UDP;
-- 
cgit v1.2.3


From 5967d33ce8a030f01a716fc0b25fcb03744a5fda Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 22 Jun 2010 16:41:31 +0900
Subject: clocksource: sh_cmt: Fix up bogus shift value.

The previous CMT fixup accidentally copied in the TMU shift value, reset
this back to its original value while preserving the TMU fix.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/clocksource/sh_cmt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index f3d3898898ed..717305d30444 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -449,7 +449,7 @@ static int sh_cmt_register_clocksource(struct sh_cmt_priv *p,
 	clk_disable(p->clk);
 
 	/* TODO: calculate good shift from rate and counter bit width */
-	cs->shift = 10;
+	cs->shift = 0;
 	cs->mult = clocksource_hz2mult(p->rate, cs->shift);
 
 	dev_info(&p->pdev->dev, "used as clock source\n");
-- 
cgit v1.2.3


From d5dc0ae4df9db00b8122378d56a071039b17a1eb Mon Sep 17 00:00:00 2001
From: Filip Aben <f.aben@option.com>
Date: Tue, 22 Jun 2010 10:10:35 -0700
Subject: hso: remove setting of low_latency flag

This patch removes the setting of the low_latency flag.
tty_flip_buffer_push() is occasionally being called in irq context, which
causes a hang if the low_latency flag is set.
Removing the low_latency flag only seems to impact the flush to ldisc,
which will now be put on a workqueue.

Signed-off-by: Filip Aben <f.aben@option.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/hso.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 0a3c41faea9c..4dd23513c5af 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1334,7 +1334,6 @@ static int hso_serial_open(struct tty_struct *tty, struct file *filp)
 	/* check for port already opened, if not set the termios */
 	serial->open_count++;
 	if (serial->open_count == 1) {
-		tty->low_latency = 1;
 		serial->rx_state = RX_IDLE;
 		/* Force default termio settings */
 		_hso_serial_set_termios(tty, NULL);
-- 
cgit v1.2.3


From f799bdb355edaabd81b778087613409a8932fbe9 Mon Sep 17 00:00:00 2001
From: Andy Adamson <andros@netapp.com>
Date: Wed, 16 Jun 2010 09:51:02 -0400
Subject: nfs4 use mandatory attribute file type in nfs4_get_root

S_ISDIR(fsinfo.fattr->mode) checks the file type rather than the mode bits,
so we should be checking for the NFS_ATTR_FATTR_TYPE fattr property.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
---
 fs/nfs/getroot.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfs/getroot.c b/fs/nfs/getroot.c
index 7428f7d6273b..a70e446e1605 100644
--- a/fs/nfs/getroot.c
+++ b/fs/nfs/getroot.c
@@ -146,7 +146,7 @@ int nfs4_get_rootfh(struct nfs_server *server, struct nfs_fh *mntfh)
 		goto out;
 	}
 
-	if (!(fsinfo.fattr->valid & NFS_ATTR_FATTR_MODE)
+	if (!(fsinfo.fattr->valid & NFS_ATTR_FATTR_TYPE)
 			|| !S_ISDIR(fsinfo.fattr->mode)) {
 		printk(KERN_ERR "nfs4_get_rootfh:"
 		       " getroot encountered non-directory\n");
-- 
cgit v1.2.3


From b76ce56192bcf618013fb9aecd83488cffd645cc Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Wed, 16 Jun 2010 13:57:32 -0400
Subject: SUNRPC: Fix a re-entrancy bug in xs_tcp_read_calldir()

If the attempt to read the calldir fails, then instead of storing the read
bytes, we currently discard them. This leads to a garbage final result when
upon re-entry to the same routine, we read the remaining bytes.

Fixes the regression in bugzilla number 16213. Please see
    https://bugzilla.kernel.org/show_bug.cgi?id=16213

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
---
 net/sunrpc/xprtsock.c | 38 ++++++++++++++++++++++----------------
 1 file changed, 22 insertions(+), 16 deletions(-)

diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 2a9675136c68..7ca65c7005ea 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -210,7 +210,8 @@ struct sock_xprt {
 	 * State of TCP reply receive
 	 */
 	__be32			tcp_fraghdr,
-				tcp_xid;
+				tcp_xid,
+				tcp_calldir;
 
 	u32			tcp_offset,
 				tcp_reclen;
@@ -927,7 +928,7 @@ static inline void xs_tcp_read_calldir(struct sock_xprt *transport,
 {
 	size_t len, used;
 	u32 offset;
-	__be32	calldir;
+	char *p;
 
 	/*
 	 * We want transport->tcp_offset to be 8 at the end of this routine
@@ -936,26 +937,33 @@ static inline void xs_tcp_read_calldir(struct sock_xprt *transport,
 	 * transport->tcp_offset is 4 (after having already read the xid).
 	 */
 	offset = transport->tcp_offset - sizeof(transport->tcp_xid);
-	len = sizeof(calldir) - offset;
+	len = sizeof(transport->tcp_calldir) - offset;
 	dprintk("RPC:       reading CALL/REPLY flag (%Zu bytes)\n", len);
-	used = xdr_skb_read_bits(desc, &calldir, len);
+	p = ((char *) &transport->tcp_calldir) + offset;
+	used = xdr_skb_read_bits(desc, p, len);
 	transport->tcp_offset += used;
 	if (used != len)
 		return;
 	transport->tcp_flags &= ~TCP_RCV_READ_CALLDIR;
-	transport->tcp_flags |= TCP_RCV_COPY_CALLDIR;
-	transport->tcp_flags |= TCP_RCV_COPY_DATA;
 	/*
 	 * We don't yet have the XDR buffer, so we will write the calldir
 	 * out after we get the buffer from the 'struct rpc_rqst'
 	 */
-	if (ntohl(calldir) == RPC_REPLY)
+	switch (ntohl(transport->tcp_calldir)) {
+	case RPC_REPLY:
+		transport->tcp_flags |= TCP_RCV_COPY_CALLDIR;
+		transport->tcp_flags |= TCP_RCV_COPY_DATA;
 		transport->tcp_flags |= TCP_RPC_REPLY;
-	else
+		break;
+	case RPC_CALL:
+		transport->tcp_flags |= TCP_RCV_COPY_CALLDIR;
+		transport->tcp_flags |= TCP_RCV_COPY_DATA;
 		transport->tcp_flags &= ~TCP_RPC_REPLY;
-	dprintk("RPC:       reading %s CALL/REPLY flag %08x\n",
-			(transport->tcp_flags & TCP_RPC_REPLY) ?
-				"reply for" : "request with", calldir);
+		break;
+	default:
+		dprintk("RPC:       invalid request message type\n");
+		xprt_force_disconnect(&transport->xprt);
+	}
 	xs_tcp_check_fraghdr(transport);
 }
 
@@ -975,12 +983,10 @@ static inline void xs_tcp_read_common(struct rpc_xprt *xprt,
 		/*
 		 * Save the RPC direction in the XDR buffer
 		 */
-		__be32	calldir = transport->tcp_flags & TCP_RPC_REPLY ?
-					htonl(RPC_REPLY) : 0;
-
 		memcpy(rcvbuf->head[0].iov_base + transport->tcp_copied,
-			&calldir, sizeof(calldir));
-		transport->tcp_copied += sizeof(calldir);
+			&transport->tcp_calldir,
+			sizeof(transport->tcp_calldir));
+		transport->tcp_copied += sizeof(transport->tcp_calldir);
 		transport->tcp_flags &= ~TCP_RCV_COPY_CALLDIR;
 	}
 
-- 
cgit v1.2.3


From 44950b67a6239b377a9e6fd52c498b310bcdd713 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Thu, 17 Jun 2010 11:45:12 -0400
Subject: NFSv4.1: Ensure that we initialise the session when following a
 referral

Put the code that is common to both the referral and ordinary mount cases
into a common helper routine.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/client.c | 122 +++++++++++++++++++++++---------------------------------
 1 file changed, 51 insertions(+), 71 deletions(-)

diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 7ec9b34a59f8..d25b5257b7a1 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -1286,6 +1286,55 @@ static void nfs4_session_set_rwsize(struct nfs_server *server)
 #endif /* CONFIG_NFS_V4_1 */
 }
 
+static int nfs4_server_common_setup(struct nfs_server *server,
+		struct nfs_fh *mntfh)
+{
+	struct nfs_fattr *fattr;
+	int error;
+
+	BUG_ON(!server->nfs_client);
+	BUG_ON(!server->nfs_client->rpc_ops);
+	BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
+
+	fattr = nfs_alloc_fattr();
+	if (fattr == NULL)
+		return -ENOMEM;
+
+	/* We must ensure the session is initialised first */
+	error = nfs4_init_session(server);
+	if (error < 0)
+		goto out;
+
+	/* Probe the root fh to retrieve its FSID and filehandle */
+	error = nfs4_get_rootfh(server, mntfh);
+	if (error < 0)
+		goto out;
+
+	dprintk("Server FSID: %llx:%llx\n",
+			(unsigned long long) server->fsid.major,
+			(unsigned long long) server->fsid.minor);
+	dprintk("Mount FH: %d\n", mntfh->size);
+
+	nfs4_session_set_rwsize(server);
+
+	error = nfs_probe_fsinfo(server, mntfh, fattr);
+	if (error < 0)
+		goto out;
+
+	if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
+		server->namelen = NFS4_MAXNAMLEN;
+
+	spin_lock(&nfs_client_lock);
+	list_add_tail(&server->client_link, &server->nfs_client->cl_superblocks);
+	list_add_tail(&server->master_link, &nfs_volume_list);
+	spin_unlock(&nfs_client_lock);
+
+	server->mount_time = jiffies;
+out:
+	nfs_free_fattr(fattr);
+	return error;
+}
+
 /*
  * Create a version 4 volume record
  */
@@ -1346,7 +1395,6 @@ error:
 struct nfs_server *nfs4_create_server(const struct nfs_parsed_mount_data *data,
 				      struct nfs_fh *mntfh)
 {
-	struct nfs_fattr *fattr;
 	struct nfs_server *server;
 	int error;
 
@@ -1356,55 +1404,19 @@ struct nfs_server *nfs4_create_server(const struct nfs_parsed_mount_data *data,
 	if (!server)
 		return ERR_PTR(-ENOMEM);
 
-	error = -ENOMEM;
-	fattr = nfs_alloc_fattr();
-	if (fattr == NULL)
-		goto error;
-
 	/* set up the general RPC client */
 	error = nfs4_init_server(server, data);
 	if (error < 0)
 		goto error;
 
-	BUG_ON(!server->nfs_client);
-	BUG_ON(!server->nfs_client->rpc_ops);
-	BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
-
-	error = nfs4_init_session(server);
-	if (error < 0)
-		goto error;
-
-	/* Probe the root fh to retrieve its FSID */
-	error = nfs4_get_rootfh(server, mntfh);
+	error = nfs4_server_common_setup(server, mntfh);
 	if (error < 0)
 		goto error;
 
-	dprintk("Server FSID: %llx:%llx\n",
-		(unsigned long long) server->fsid.major,
-		(unsigned long long) server->fsid.minor);
-	dprintk("Mount FH: %d\n", mntfh->size);
-
-	nfs4_session_set_rwsize(server);
-
-	error = nfs_probe_fsinfo(server, mntfh, fattr);
-	if (error < 0)
-		goto error;
-
-	if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
-		server->namelen = NFS4_MAXNAMLEN;
-
-	spin_lock(&nfs_client_lock);
-	list_add_tail(&server->client_link, &server->nfs_client->cl_superblocks);
-	list_add_tail(&server->master_link, &nfs_volume_list);
-	spin_unlock(&nfs_client_lock);
-
-	server->mount_time = jiffies;
 	dprintk("<-- nfs4_create_server() = %p\n", server);
-	nfs_free_fattr(fattr);
 	return server;
 
 error:
-	nfs_free_fattr(fattr);
 	nfs_free_server(server);
 	dprintk("<-- nfs4_create_server() = error %d\n", error);
 	return ERR_PTR(error);
@@ -1418,7 +1430,6 @@ struct nfs_server *nfs4_create_referral_server(struct nfs_clone_mount *data,
 {
 	struct nfs_client *parent_client;
 	struct nfs_server *server, *parent_server;
-	struct nfs_fattr *fattr;
 	int error;
 
 	dprintk("--> nfs4_create_referral_server()\n");
@@ -1427,11 +1438,6 @@ struct nfs_server *nfs4_create_referral_server(struct nfs_clone_mount *data,
 	if (!server)
 		return ERR_PTR(-ENOMEM);
 
-	error = -ENOMEM;
-	fattr = nfs_alloc_fattr();
-	if (fattr == NULL)
-		goto error;
-
 	parent_server = NFS_SB(data->sb);
 	parent_client = parent_server->nfs_client;
 
@@ -1456,40 +1462,14 @@ struct nfs_server *nfs4_create_referral_server(struct nfs_clone_mount *data,
 	if (error < 0)
 		goto error;
 
-	BUG_ON(!server->nfs_client);
-	BUG_ON(!server->nfs_client->rpc_ops);
-	BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
-
-	/* Probe the root fh to retrieve its FSID and filehandle */
-	error = nfs4_get_rootfh(server, mntfh);
-	if (error < 0)
-		goto error;
-
-	/* probe the filesystem info for this server filesystem */
-	error = nfs_probe_fsinfo(server, mntfh, fattr);
+	error = nfs4_server_common_setup(server, mntfh);
 	if (error < 0)
 		goto error;
 
-	if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
-		server->namelen = NFS4_MAXNAMLEN;
-
-	dprintk("Referral FSID: %llx:%llx\n",
-		(unsigned long long) server->fsid.major,
-		(unsigned long long) server->fsid.minor);
-
-	spin_lock(&nfs_client_lock);
-	list_add_tail(&server->client_link, &server->nfs_client->cl_superblocks);
-	list_add_tail(&server->master_link, &nfs_volume_list);
-	spin_unlock(&nfs_client_lock);
-
-	server->mount_time = jiffies;
-
-	nfs_free_fattr(fattr);
 	dprintk("<-- nfs_create_referral_server() = %p\n", server);
 	return server;
 
 error:
-	nfs_free_fattr(fattr);
 	nfs_free_server(server);
 	dprintk("<-- nfs4_create_referral_server() = error %d\n", error);
 	return ERR_PTR(error);
-- 
cgit v1.2.3


From 0be8189f2c87fcc747d6a4a657a0b6e2161b2318 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Fri, 18 Jun 2010 12:23:58 -0400
Subject: NFSv4: Ensure that /proc/self/mountinfo displays the minor version
 number

Currently, we do not display the minor version mount parameter in the
/proc mount info.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
---
 fs/nfs/super.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 04214fc5c304..f9df16de4a56 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -570,6 +570,22 @@ static void nfs_show_mountd_options(struct seq_file *m, struct nfs_server *nfss,
 	nfs_show_mountd_netid(m, nfss, showdefaults);
 }
 
+#ifdef CONFIG_NFS_V4
+static void nfs_show_nfsv4_options(struct seq_file *m, struct nfs_server *nfss,
+				    int showdefaults)
+{
+	struct nfs_client *clp = nfss->nfs_client;
+
+	seq_printf(m, ",clientaddr=%s", clp->cl_ipaddr);
+	seq_printf(m, ",minorversion=%u", clp->cl_minorversion);
+}
+#else
+static void nfs_show_nfsv4_options(struct seq_file *m, struct nfs_server *nfss,
+				    int showdefaults)
+{
+}
+#endif
+
 /*
  * Describe the mount options in force on this server representation
  */
@@ -631,11 +647,9 @@ static void nfs_show_mount_options(struct seq_file *m, struct nfs_server *nfss,
 
 	if (version != 4)
 		nfs_show_mountd_options(m, nfss, showdefaults);
+	else
+		nfs_show_nfsv4_options(m, nfss, showdefaults);
 
-#ifdef CONFIG_NFS_V4
-	if (clp->rpc_ops->version == 4)
-		seq_printf(m, ",clientaddr=%s", clp->cl_ipaddr);
-#endif
 	if (nfss->options & NFS_OPTION_FSCACHE)
 		seq_printf(m, ",fsc");
 }
-- 
cgit v1.2.3


From d3f6baaa34c54040b3ef30950e59b54ac0624b21 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Tue, 22 Jun 2010 08:52:39 -0400
Subject: NFSv4: Fix an embarassing typo in encode_attrs()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Apparently, we have never been able to set the atime correctly from the
NFSv4 client.

Reported-by: 小倉一夫 <ka-ogura@bd6.so-net.ne.jp>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
---
 fs/nfs/nfs4xdr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 6bdef28efa33..65c8dae4b267 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -862,8 +862,8 @@ static void encode_attrs(struct xdr_stream *xdr, const struct iattr *iap, const
 		bmval1 |= FATTR4_WORD1_TIME_ACCESS_SET;
 		*p++ = cpu_to_be32(NFS4_SET_TO_CLIENT_TIME);
 		*p++ = cpu_to_be32(0);
-		*p++ = cpu_to_be32(iap->ia_mtime.tv_sec);
-		*p++ = cpu_to_be32(iap->ia_mtime.tv_nsec);
+		*p++ = cpu_to_be32(iap->ia_atime.tv_sec);
+		*p++ = cpu_to_be32(iap->ia_atime.tv_nsec);
 	}
 	else if (iap->ia_valid & ATTR_ATIME) {
 		bmval1 |= FATTR4_WORD1_TIME_ACCESS_SET;
-- 
cgit v1.2.3


From 0b28bac5aef7bd1ab213723df031e61db9ff151a Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 17 Jun 2010 22:31:17 -0700
Subject: Input: fixup X86_MRST selects

Some of the recent X86_MRST additions make some "select"s
conditional on X86_MRST but missed some related kconfig symbols,
causing:

drivers/built-in.o: In function `ps2_end_command':
(.text+0x257ab2): undefined reference to `i8042_check_port_owner'
drivers/built-in.o: In function `ps2_end_command':
(.text+0x257ae1): undefined reference to `i8042_unlock_chip'
drivers/built-in.o: In function `ps2_begin_command':
(.text+0x257b40): undefined reference to `i8042_check_port_owner'
drivers/built-in.o: In function `ps2_begin_command':
(.text+0x257b6f): undefined reference to `i8042_lock_chip'

when SERIO_I8042=m, SERIO_LIBPS2=y, KEYBOARD_ATKBD=y.

We need to make i8042 dependant upon !X86_MRST and allow deselecting
atkbd on Moorestown even when !CONFIG_EMBEDDED.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/Kconfig | 2 +-
 drivers/input/serio/Kconfig    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index d8fa5d724c57..0f9a4785d798 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -69,7 +69,7 @@ config KEYBOARD_ATARI
 	  module will be called atakbd.
 
 config KEYBOARD_ATKBD
-	tristate "AT keyboard" if EMBEDDED || !X86
+	tristate "AT keyboard" if EMBEDDED || !X86 || X86_MRST
 	default y
 	select SERIO
 	select SERIO_LIBPS2
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index 3bfe8fafc6ad..256b9e9394dc 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -22,7 +22,7 @@ config SERIO_I8042
 	tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
 	default y
 	depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \
-		   (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN
+		   (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN && !X86_MRST
 	help
 	  i8042 is the chip over which the standard AT keyboard and PS/2
 	  mouse are connected to the computer. If you use these devices,
-- 
cgit v1.2.3


From 493630b20389b66dc475eb05cfefd33ad98d3741 Mon Sep 17 00:00:00 2001
From: Ping Cheng <pingc@wacom.com>
Date: Tue, 22 Jun 2010 11:21:34 -0700
Subject: Input: wacom - fix serial number handling on Cintiq 21UX2

Cintiq 21UX2 added 8 more bits for the tool serial number and more
buttons for the expresskey. We did not enable them properly in the
last patch.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/tablet/wacom_wac.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index d564af58175c..415f6306105d 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -284,12 +284,13 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 			(data[4] << 20) + (data[5] << 12) +
 			(data[6] << 4) + (data[7] >> 4);
 
-		wacom->id[idx] = (data[2] << 4) | (data[3] >> 4);
+		wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) |
+			((data[7] & 0x0f) << 20) | ((data[8] & 0xf0) << 12);
 
-		switch (wacom->id[idx]) {
+		switch (wacom->id[idx] & 0xfffff) {
 		case 0x812: /* Inking pen */
 		case 0x801: /* Intuos3 Inking pen */
-		case 0x20802: /* Intuos4 Classic Pen */
+		case 0x20802: /* Intuos4 Inking Pen */
 		case 0x012:
 			wacom->tool[idx] = BTN_TOOL_PENCIL;
 			break;
@@ -513,7 +514,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 			input_report_abs(input, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
 			input_report_abs(input, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
 
-			if ((data[5] & 0x1f) | (data[6] & 0x1f) | (data[1] & 0x1f) |
+			if ((data[5] & 0x1f) | data[6] | (data[1] & 0x1f) |
 				data[2] | (data[3] & 0x1f) | data[4] | data[8] |
 				(data[7] & 0x01)) {
 				input_report_key(input, wacom->tool[1], 1);
-- 
cgit v1.2.3


From 686d363786a53ed28ee875b84ef24e6d5126ef6f Mon Sep 17 00:00:00 2001
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: Thu, 10 Jun 2010 18:16:11 +0300
Subject: virtio: return ENOMEM on out of memory

add_buf returns ring size on out of memory,
this is not what devices expect.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org # .34.x
---
 drivers/virtio/virtio_ring.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 1ca88908723b..afe7e21dd0ae 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -119,7 +119,7 @@ static int vring_add_indirect(struct vring_virtqueue *vq,
 
 	desc = kmalloc((out + in) * sizeof(struct vring_desc), gfp);
 	if (!desc)
-		return vq->vring.num;
+		return -ENOMEM;
 
 	/* Transfer entries from the sg list into the indirect page */
 	for (i = 0; i < out; i++) {
-- 
cgit v1.2.3


From b03214d559471359e2a85ae256686381d0672f29 Mon Sep 17 00:00:00 2001
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: Wed, 23 Jun 2010 22:49:06 -0600
Subject: virtio-pci: disable msi at startup

virtio-pci resets the device at startup by writing to the status
register, but this does not clear the pci config space,
specifically msi enable status which affects register
layout.

This breaks things like kdump when they try to use e.g. virtio-blk.

Fix by forcing msi off at startup. Since pci.c already has
a routine to do this, we export and use it instead of duplicating code.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
---
 drivers/pci/pci.c           | 1 +
 drivers/virtio/virtio_pci.c | 3 +++
 2 files changed, 4 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 60f30e7f1c8c..740fb4ea9669 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2292,6 +2292,7 @@ void pci_msi_off(struct pci_dev *dev)
 		pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
 	}
 }
+EXPORT_SYMBOL_GPL(pci_msi_off);
 
 #ifndef HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE
 int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 95896f387927..ef8d9d558fc7 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -636,6 +636,9 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev,
 	INIT_LIST_HEAD(&vp_dev->virtqueues);
 	spin_lock_init(&vp_dev->lock);
 
+	/* Disable MSI/MSIX to bring device to a known good state. */
+	pci_msi_off(pci_dev);
+
 	/* enable the device */
 	err = pci_enable_device(pci_dev);
 	if (err)
-- 
cgit v1.2.3


From f3b577dec1f2ce32d2db6d2ca6badff7002512af Mon Sep 17 00:00:00 2001
From: Daniel J Blueman <daniel.blueman@gmail.com>
Date: Tue, 1 Jun 2010 14:06:13 +0100
Subject: rcu: apply RCU protection to wake_affine()

The task_group() function returns a pointer that must be protected
by either RCU, the ->alloc_lock, or the cgroup lock (see the
rcu_dereference_check() in task_subsys_state(), which is invoked by
task_group()).  The wake_affine() function currently does none of these,
which means that a concurrent update would be within its rights to free
the structure returned by task_group().  Because wake_affine() uses this
structure only to compute load-balancing heuristics, there is no reason
to acquire either of the two locks.

Therefore, this commit introduces an RCU read-side critical section that
starts before the first call to task_group() and ends after the last use
of the "tg" pointer returned from task_group().  Thanks to Li Zefan for
pointing out the need to extend the RCU read-side critical section from
that proposed by the original patch.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
---
 kernel/sched_fair.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index eed35eded602..a878b5332daa 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -1240,6 +1240,7 @@ static int wake_affine(struct sched_domain *sd, struct task_struct *p, int sync)
 	 * effect of the currently running task from the load
 	 * of the current CPU:
 	 */
+	rcu_read_lock();
 	if (sync) {
 		tg = task_group(current);
 		weight = current->se.load.weight;
@@ -1275,6 +1276,7 @@ static int wake_affine(struct sched_domain *sd, struct task_struct *p, int sync)
 		balanced = this_eff_load <= prev_eff_load;
 	} else
 		balanced = true;
+	rcu_read_unlock();
 
 	/*
 	 * If the currently running task will sleep within
-- 
cgit v1.2.3


From 94bfa3b6692c7a3f6f119596724204ec975d3ef0 Mon Sep 17 00:00:00 2001
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Date: Mon, 7 Jun 2010 17:09:45 -0700
Subject: idr: fix RCU lockdep splat in idr_get_next()

Convert to rcu_dereference_raw() given that many callers may have many
different locking models.

Located-by: Miles Lane <miles.lane@gmail.com>
Tested-by: Miles Lane <miles.lane@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
---
 lib/idr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/lib/idr.c b/lib/idr.c
index c1a206901761..7f1a4f0acf50 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -602,7 +602,7 @@ void *idr_get_next(struct idr *idp, int *nextidp)
 	/* find first ent */
 	n = idp->layers * IDR_BITS;
 	max = 1 << n;
-	p = rcu_dereference(idp->top);
+	p = rcu_dereference_raw(idp->top);
 	if (!p)
 		return NULL;
 
@@ -610,7 +610,7 @@ void *idr_get_next(struct idr *idp, int *nextidp)
 		while (n > 0 && p) {
 			n -= IDR_BITS;
 			*paa++ = p;
-			p = rcu_dereference(p->ary[(id >> n) & IDR_MASK]);
+			p = rcu_dereference_raw(p->ary[(id >> n) & IDR_MASK]);
 		}
 
 		if (p) {
-- 
cgit v1.2.3


From 8f1c14b2e3b1805d3e9e6a306d07f5371ea703a7 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Wed, 23 Jun 2010 00:32:03 +0000
Subject: snmp: fix SNMP_ADD_STATS()

commit aa2ea0586d9d (tcp: fix outsegs stat for TSO segments) incorrectly
assumed SNMP_ADD_STATS() was used from BH context.

Fix this using mib[!in_softirq()] instead of mib[0]

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/snmp.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/net/snmp.h b/include/net/snmp.h
index 92456f1035f5..899003d18db9 100644
--- a/include/net/snmp.h
+++ b/include/net/snmp.h
@@ -134,7 +134,7 @@ struct linux_xfrm_mib {
 #define SNMP_ADD_STATS_USER(mib, field, addend)	\
 			this_cpu_add(mib[1]->mibs[field], addend)
 #define SNMP_ADD_STATS(mib, field, addend)	\
-			this_cpu_add(mib[0]->mibs[field], addend)
+			this_cpu_add(mib[!in_softirq()]->mibs[field], addend)
 /*
  * Use "__typeof__(*mib[0]) *ptr" instead of "__typeof__(mib[0]) ptr"
  * to make @ptr a non-percpu pointer.
-- 
cgit v1.2.3


From 06aeb78b85d8c04af03eb37353aa0df98d3db170 Mon Sep 17 00:00:00 2001
From: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Date: Wed, 23 Jun 2010 11:49:42 -0700
Subject: net: add dependency on fw class module to qlcnic and netxen_nic

netxen_nic and qlcnic driver depends on firmware_class module.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 2decc597bda7..ce2fcdd4ab90 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2754,6 +2754,7 @@ config MYRI10GE_DCA
 config NETXEN_NIC
 	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
 	depends on PCI
+	select FW_LOADER
 	help
 	  This enables the support for NetXen's Gigabit Ethernet card.
 
@@ -2819,6 +2820,7 @@ config BNX2X
 config QLCNIC
 	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
 	depends on PCI
+	select FW_LOADER
 	help
 	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
 	  devices.
-- 
cgit v1.2.3


From 6b2a541db58dba5860ccbcfaf36caee064b8a9fd Mon Sep 17 00:00:00 2001
From: Dmitry Kravkov <dmitry@broadcom.com>
Date: Wed, 23 Jun 2010 11:57:09 -0700
Subject: cnic: Disable statistics initialization for eth clients that do not
 support statistics

Disable statistics initialization for eth clients that do not support
 statistics. This prevents memory corruption on bnx2x hw.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
 drivers/net/cnic.c | 55 +++++++++++++++++++++++++++++++++---------------------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index fe925663d39a..80471269977a 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -3919,8 +3919,9 @@ static void cnic_init_bnx2x_tx_ring(struct cnic_dev *dev)
 		HC_INDEX_DEF_C_ETH_ISCSI_CQ_CONS;
 	context->cstorm_st_context.status_block_id = BNX2X_DEF_SB_ID;
 
-	context->xstorm_st_context.statistics_data = (cli |
-				XSTORM_ETH_ST_CONTEXT_STATISTICS_ENABLE);
+	if (cli < MAX_X_STAT_COUNTER_ID)
+		context->xstorm_st_context.statistics_data = cli |
+				XSTORM_ETH_ST_CONTEXT_STATISTICS_ENABLE;
 
 	context->xstorm_ag_context.cdu_reserved =
 		CDU_RSRVD_VALUE_TYPE_A(BNX2X_HW_CID(BNX2X_ISCSI_L2_CID, func),
@@ -3928,10 +3929,12 @@ static void cnic_init_bnx2x_tx_ring(struct cnic_dev *dev)
 					ETH_CONNECTION_TYPE);
 
 	/* reset xstorm per client statistics */
-	val = BAR_XSTRORM_INTMEM +
-	      XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
-	for (i = 0; i < sizeof(struct xstorm_per_client_stats) / 4; i++)
-		CNIC_WR(dev, val + i * 4, 0);
+	if (cli < MAX_X_STAT_COUNTER_ID) {
+		val = BAR_XSTRORM_INTMEM +
+		      XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
+		for (i = 0; i < sizeof(struct xstorm_per_client_stats) / 4; i++)
+			CNIC_WR(dev, val + i * 4, 0);
+	}
 
 	cp->tx_cons_ptr =
 		&cp->bnx2x_def_status_blk->c_def_status_block.index_values[
@@ -3978,9 +3981,11 @@ static void cnic_init_bnx2x_rx_ring(struct cnic_dev *dev)
 						BNX2X_ISCSI_RX_SB_INDEX_NUM;
 	context->ustorm_st_context.common.clientId = cli;
 	context->ustorm_st_context.common.status_block_id = BNX2X_DEF_SB_ID;
-	context->ustorm_st_context.common.flags =
-		USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS;
-	context->ustorm_st_context.common.statistics_counter_id = cli;
+	if (cli < MAX_U_STAT_COUNTER_ID) {
+		context->ustorm_st_context.common.flags =
+			USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS;
+		context->ustorm_st_context.common.statistics_counter_id = cli;
+	}
 	context->ustorm_st_context.common.mc_alignment_log_size = 0;
 	context->ustorm_st_context.common.bd_buff_size =
 						cp->l2_single_buf_size;
@@ -4011,10 +4016,13 @@ static void cnic_init_bnx2x_rx_ring(struct cnic_dev *dev)
 
 	/* client tstorm info */
 	tstorm_client.mtu = cp->l2_single_buf_size - 14;
-	tstorm_client.config_flags =
-			(TSTORM_ETH_CLIENT_CONFIG_E1HOV_REM_ENABLE |
-			TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE);
-	tstorm_client.statistics_counter_id = cli;
+	tstorm_client.config_flags = TSTORM_ETH_CLIENT_CONFIG_E1HOV_REM_ENABLE;
+
+	if (cli < MAX_T_STAT_COUNTER_ID) {
+		tstorm_client.config_flags |=
+				TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
+		tstorm_client.statistics_counter_id = cli;
+	}
 
 	CNIC_WR(dev, BAR_TSTRORM_INTMEM +
 		   TSTORM_CLIENT_CONFIG_OFFSET(port, cli),
@@ -4024,16 +4032,21 @@ static void cnic_init_bnx2x_rx_ring(struct cnic_dev *dev)
 		   ((u32 *)&tstorm_client)[1]);
 
 	/* reset tstorm per client statistics */
-	val = BAR_TSTRORM_INTMEM +
-	      TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
-	for (i = 0; i < sizeof(struct tstorm_per_client_stats) / 4; i++)
-		CNIC_WR(dev, val + i * 4, 0);
+	if (cli < MAX_T_STAT_COUNTER_ID) {
+
+		val = BAR_TSTRORM_INTMEM +
+		      TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
+		for (i = 0; i < sizeof(struct tstorm_per_client_stats) / 4; i++)
+			CNIC_WR(dev, val + i * 4, 0);
+	}
 
 	/* reset ustorm per client statistics */
-	val = BAR_USTRORM_INTMEM +
-	      USTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
-	for (i = 0; i < sizeof(struct ustorm_per_client_stats) / 4; i++)
-		CNIC_WR(dev, val + i * 4, 0);
+	if (cli < MAX_U_STAT_COUNTER_ID) {
+		val = BAR_USTRORM_INTMEM +
+		      USTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
+		for (i = 0; i < sizeof(struct ustorm_per_client_stats) / 4; i++)
+			CNIC_WR(dev, val + i * 4, 0);
+	}
 
 	cp->rx_cons_ptr =
 		&cp->bnx2x_def_status_blk->u_def_status_block.index_values[
-- 
cgit v1.2.3


From 51223df6c33d2d774429aef5fe8ae666401124b0 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Sun, 6 Jun 2010 08:05:58 -0400
Subject: MAINTAINERS: change mailing list address for CIFS

We're moving the mailing list to linux-cifs@vger.kernel.org.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 6d119c98b89b..de77577840ab 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1581,7 +1581,7 @@ F:	include/linux/coda*.h
 
 COMMON INTERNET FILE SYSTEM (CIFS)
 M:	Steve French <sfrench@samba.org>
-L:	linux-cifs-client@lists.samba.org (moderated for non-subscribers)
+L:	linux-cifs@vger.kernel.org
 L:	samba-technical@lists.samba.org (moderated for non-subscribers)
 W:	http://linux-cifs.samba.org/
 Q:	http://patchwork.ozlabs.org/project/linux-cifs-client/list/
-- 
cgit v1.2.3


From 38000a94a902e94ca8b5498f7871c6316de8957a Mon Sep 17 00:00:00 2001
From: Brandon Philips <brandon@ifup.org>
Date: Wed, 16 Jun 2010 16:21:58 +0000
Subject: sky2: enable rx/tx in sky2_phy_reinit()

sky2_phy_reinit is called by the ethtool helpers sky2_set_settings,
sky2_nway_reset and sky2_set_pauseparam when netif_running.

However, at the end of sky2_phy_init GM_GP_CTRL has GM_GPCR_RX_ENA and
GM_GPCR_TX_ENA cleared. So, doing these commands causes the device to
stop working:

$ ethtool -r eth0
$ ethtool -A eth0 autoneg off

Fix this issue by enabling Rx/Tx after running sky2_phy_init in
sky2_phy_reinit.

Signed-off-by: Brandon Philips <bphilips@suse.de>
Tested-by: Brandon Philips <bphilips@suse.de>
Cc: stable@kernel.org
Tested-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 2111c7bbf578..7985165e84fc 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -717,11 +717,24 @@ static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 }
 
+/* Enable Rx/Tx */
+static void sky2_enable_rx_tx(struct sky2_port *sky2)
+{
+	struct sky2_hw *hw = sky2->hw;
+	unsigned port = sky2->port;
+	u16 reg;
+
+	reg = gma_read16(hw, port, GM_GP_CTRL);
+	reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
+	gma_write16(hw, port, GM_GP_CTRL, reg);
+}
+
 /* Force a renegotiation */
 static void sky2_phy_reinit(struct sky2_port *sky2)
 {
 	spin_lock_bh(&sky2->phy_lock);
 	sky2_phy_init(sky2->hw, sky2->port);
+	sky2_enable_rx_tx(sky2);
 	spin_unlock_bh(&sky2->phy_lock);
 }
 
@@ -2040,7 +2053,6 @@ static void sky2_link_up(struct sky2_port *sky2)
 {
 	struct sky2_hw *hw = sky2->hw;
 	unsigned port = sky2->port;
-	u16 reg;
 	static const char *fc_name[] = {
 		[FC_NONE]	= "none",
 		[FC_TX]		= "tx",
@@ -2048,10 +2060,7 @@ static void sky2_link_up(struct sky2_port *sky2)
 		[FC_BOTH]	= "both",
 	};
 
-	/* enable Rx/Tx */
-	reg = gma_read16(hw, port, GM_GP_CTRL);
-	reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
-	gma_write16(hw, port, GM_GP_CTRL, reg);
+	sky2_enable_rx_tx(sky2);
 
 	gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
 
-- 
cgit v1.2.3


From 8695159967957015f8dfb49315d6f88e111d90e0 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <peterz@infradead.org>
Date: Tue, 22 Jun 2010 11:44:53 +0200
Subject: sched: silence PROVE_RCU in sched_fork()

Because cgroup_fork() is ran before sched_fork() [ from copy_process() ]
and the child's pid is not yet visible the child is pinned to its
cgroup. Therefore we can silence this warning.

A nicer solution would be moving cgroup_fork() to right after
dup_task_struct() and exclude PF_STARTING from task_subsys_state().

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
---
 kernel/sched.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/kernel/sched.c b/kernel/sched.c
index f8b8996228dd..a2d215d132f6 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -2494,7 +2494,16 @@ void sched_fork(struct task_struct *p, int clone_flags)
 	if (p->sched_class->task_fork)
 		p->sched_class->task_fork(p);
 
+	/*
+	 * The child is not yet in the pid-hash so no cgroup attach races,
+	 * and the cgroup is pinned to this child due to cgroup_fork()
+	 * is ran before sched_fork().
+	 *
+	 * Silence PROVE_RCU.
+	 */
+	rcu_read_lock();
 	set_task_cpu(p, cpu);
+	rcu_read_unlock();
 
 #if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
 	if (likely(sched_info_on()))
-- 
cgit v1.2.3


From f3b99be19ded511a1bf05a148276239d9f13eefa Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Thu, 24 Jun 2010 13:31:03 +1000
Subject: Restore partition detection of newly created md arrays.

Commit  b821eaa572fd737faaf6928ba046e571526c36c6 broke partition
detection for md arrays.

The logic was almost right.  However if revalidate_disk is called
when the device is not yet open, bdev->bd_disk won't be set, so the
flush_disk() Call will not set bd_invalidated.

So when md_open is called we still need to ensure that
->bd_invalidated gets set.  This is easily done with a call to
check_disk_size_change in the place where the offending commit removed
check_disk_change.  At the important times, the size will have changed
from 0 to non-zero, so check_disk_size_change will set bd_invalidated.

Tested-by: Duncan <1i5t5.duncan@cox.net>
Reported-by: Duncan <1i5t5.duncan@cox.net>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 46b3a044eadf..4edcda8f4869 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5895,6 +5895,7 @@ static int md_open(struct block_device *bdev, fmode_t mode)
 	atomic_inc(&mddev->openers);
 	mutex_unlock(&mddev->open_mutex);
 
+	check_disk_size_change(mddev->gendisk, bdev);
  out:
 	return err;
 }
-- 
cgit v1.2.3


From 0544a21db02c1d8883158fd6f323364f830a120a Mon Sep 17 00:00:00 2001
From: "Prasanna S. Panchamukhi" <prasanna.panchamukhi@riverbed.com>
Date: Thu, 24 Jun 2010 13:31:03 +1000
Subject: md: raid10: Fix null pointer dereference in fix_read_error()

Such NULL pointer dereference can occur when the driver was fixing the
read errors/bad blocks and the disk was physically removed
causing a system crash. This patch check if the
rcu_dereference() returns valid rdev before accessing it in fix_read_error().

Cc: stable@kernel.org
Signed-off-by: Prasanna S. Panchamukhi <prasanna.panchamukhi@riverbed.com>
Signed-off-by: Rob Becker <rbecker@riverbed.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid10.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 03724992cdf2..6d420cb487b5 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1482,14 +1482,14 @@ static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio)
 	int sectors = r10_bio->sectors;
 	mdk_rdev_t*rdev;
 	int max_read_errors = atomic_read(&mddev->max_corr_read_errors);
+	int d = r10_bio->devs[r10_bio->read_slot].devnum;
 
 	rcu_read_lock();
-	{
-		int d = r10_bio->devs[r10_bio->read_slot].devnum;
+	rdev = rcu_dereference(conf->mirrors[d].rdev);
+	if (rdev) { /* If rdev is not NULL */
 		char b[BDEVNAME_SIZE];
 		int cur_read_error_count = 0;
 
-		rdev = rcu_dereference(conf->mirrors[d].rdev);
 		bdevname(rdev->bdev, b);
 
 		if (test_bit(Faulty, &rdev->flags)) {
@@ -1530,7 +1530,7 @@ static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio)
 
 		rcu_read_lock();
 		do {
-			int d = r10_bio->devs[sl].devnum;
+			d = r10_bio->devs[sl].devnum;
 			rdev = rcu_dereference(conf->mirrors[d].rdev);
 			if (rdev &&
 			    test_bit(In_sync, &rdev->flags)) {
@@ -1564,7 +1564,7 @@ static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio)
 		rcu_read_lock();
 		while (sl != r10_bio->read_slot) {
 			char b[BDEVNAME_SIZE];
-			int d;
+
 			if (sl==0)
 				sl = conf->copies;
 			sl--;
@@ -1601,7 +1601,7 @@ static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio)
 		}
 		sl = start;
 		while (sl != r10_bio->read_slot) {
-			int d;
+
 			if (sl==0)
 				sl = conf->copies;
 			sl--;
-- 
cgit v1.2.3


From e93f68a1fc6244c05ad8fae28e75835ec74ab34e Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 15 Jun 2010 09:36:03 +0100
Subject: md: fix handling of array level takeover that re-arranges devices.

Most array level changes leave the list of devices largely unchanged,
possibly causing one at the end to become redundant.
However conversions between RAID0 and RAID10 need to renumber
all devices (except 0).

This renumbering is currently being done in the ->run method when the
new personality takes over.  However this is too late as the common
code in md.c might already have invalidated some of the devices if
they had a ->raid_disk number that appeared to high.

Moving it into the ->takeover method is too early as the array is
still active at that time and wrong ->raid_disk numbers could cause
confusion.

So add a ->new_raid_disk field to mdk_rdev_s and use it to communicate
the new raid_disk number.
Now the common code knows exactly which devices need to be renumbered,
and which can be invalidated, and can do it all at a convenient time
when the array is suspend.
It can also update some symlinks in sysfs which previously were not be
updated correctly.

Reported-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.c     | 35 ++++++++++++++++++++++++++++++-----
 drivers/md/md.h     |  3 +++
 drivers/md/raid0.c  | 11 +++--------
 drivers/md/raid0.h  |  3 ---
 drivers/md/raid10.c | 19 +++++--------------
 drivers/md/raid10.h |  5 -----
 6 files changed, 41 insertions(+), 35 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 4edcda8f4869..4869128bf742 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3001,6 +3001,9 @@ level_store(mddev_t *mddev, const char *buf, size_t len)
 		return -EINVAL;
 	}
 
+	list_for_each_entry(rdev, &mddev->disks, same_set)
+		rdev->new_raid_disk = rdev->raid_disk;
+
 	/* ->takeover must set new_* and/or delta_disks
 	 * if it succeeds, and may set them when it fails.
 	 */
@@ -3051,13 +3054,35 @@ level_store(mddev_t *mddev, const char *buf, size_t len)
 		mddev->safemode = 0;
 	}
 
-	module_put(mddev->pers->owner);
-	/* Invalidate devices that are now superfluous */
-	list_for_each_entry(rdev, &mddev->disks, same_set)
-		if (rdev->raid_disk >= mddev->raid_disks) {
-			rdev->raid_disk = -1;
+	list_for_each_entry(rdev, &mddev->disks, same_set) {
+		char nm[20];
+		if (rdev->raid_disk < 0)
+			continue;
+		if (rdev->new_raid_disk > mddev->raid_disks)
+			rdev->new_raid_disk = -1;
+		if (rdev->new_raid_disk == rdev->raid_disk)
+			continue;
+		sprintf(nm, "rd%d", rdev->raid_disk);
+		sysfs_remove_link(&mddev->kobj, nm);
+	}
+	list_for_each_entry(rdev, &mddev->disks, same_set) {
+		if (rdev->raid_disk < 0)
+			continue;
+		if (rdev->new_raid_disk == rdev->raid_disk)
+			continue;
+		rdev->raid_disk = rdev->new_raid_disk;
+		if (rdev->raid_disk < 0)
 			clear_bit(In_sync, &rdev->flags);
+		else {
+			char nm[20];
+			sprintf(nm, "rd%d", rdev->raid_disk);
+			if(sysfs_create_link(&mddev->kobj, &rdev->kobj, nm))
+				printk("md: cannot register %s for %s after level change\n",
+				       nm, mdname(mddev));
 		}
+	}
+
+	module_put(mddev->pers->owner);
 	mddev->pers = pers;
 	mddev->private = priv;
 	strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 7ab5ea155452..10597bfec000 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -78,6 +78,9 @@ struct mdk_rdev_s
 
 	int desc_nr;			/* descriptor index in the superblock */
 	int raid_disk;			/* role of device in array */
+	int new_raid_disk;		/* role that the device will have in
+					 * the array after a level-change completes.
+					 */
 	int saved_raid_disk;		/* role that device used to have in the
 					 * array and could again if we did a partial
 					 * resync from the bitmap
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index e70f004c99e8..7c7c38058bc2 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -173,9 +173,11 @@ static int create_strip_zones(mddev_t *mddev, raid0_conf_t **private_conf)
 	list_for_each_entry(rdev1, &mddev->disks, same_set) {
 		int j = rdev1->raid_disk;
 
-		if (mddev->level == 10)
+		if (mddev->level == 10) {
 			/* taking over a raid10-n2 array */
 			j /= 2;
+			rdev1->new_raid_disk = j;
+		}
 
 		if (j < 0 || j >= mddev->raid_disks) {
 			printk(KERN_ERR "md/raid0:%s: bad disk number %d - "
@@ -361,12 +363,6 @@ static int raid0_run(mddev_t *mddev)
 		mddev->private = conf;
 	}
 	conf = mddev->private;
-	if (conf->scale_raid_disks) {
-		int i;
-		for (i=0; i < conf->strip_zone[0].nb_dev; i++)
-			conf->devlist[i]->raid_disk /= conf->scale_raid_disks;
-		/* FIXME update sysfs rd links */
-	}
 
 	/* calculate array device size */
 	md_set_array_sectors(mddev, raid0_size(mddev, 0, 0));
@@ -643,7 +639,6 @@ static void *raid0_takeover_raid10(mddev_t *mddev)
 	mddev->recovery_cp = MaxSector;
 
 	create_strip_zones(mddev, &priv_conf);
-	priv_conf->scale_raid_disks = 2;
 	return priv_conf;
 }
 
diff --git a/drivers/md/raid0.h b/drivers/md/raid0.h
index d724e664ca4d..91f8e876ee64 100644
--- a/drivers/md/raid0.h
+++ b/drivers/md/raid0.h
@@ -13,9 +13,6 @@ struct raid0_private_data
 	struct strip_zone *strip_zone;
 	mdk_rdev_t **devlist; /* lists of rdevs, pointed to by strip_zone->dev */
 	int nr_strip_zones;
-	int scale_raid_disks; /* divide rdev->raid_disks by this in run()
-			       * to handle conversion from raid10
-			       */
 };
 
 typedef struct raid0_private_data raid0_conf_t;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 6d420cb487b5..1bab3559f3e2 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -2241,7 +2241,6 @@ static conf_t *setup_conf(mddev_t *mddev)
 	if (!conf->thread)
 		goto out;
 
-	conf->scale_disks = 0;
 	conf->mddev = mddev;
 	return conf;
 
@@ -2300,11 +2299,6 @@ static int run(mddev_t *mddev)
 		if (disk_idx >= conf->raid_disks
 		    || disk_idx < 0)
 			continue;
-		if (conf->scale_disks) {
-			disk_idx *= conf->scale_disks;
-			rdev->raid_disk = disk_idx;
-			/* MOVE 'rd%d' link !! */
-		}
 		disk = conf->mirrors + disk_idx;
 
 		disk->rdev = rdev;
@@ -2435,13 +2429,6 @@ static void *raid10_takeover_raid0(mddev_t *mddev)
 		return ERR_PTR(-EINVAL);
 	}
 
-	/* Update slot numbers to obtain
-	 * degraded raid10 with missing mirrors
-	 */
-	list_for_each_entry(rdev, &mddev->disks, same_set) {
-		rdev->raid_disk *= 2;
-	}
-
 	/* Set new parameters */
 	mddev->new_level = 10;
 	/* new layout: far_copies = 1, near_copies = 2 */
@@ -2454,7 +2441,11 @@ static void *raid10_takeover_raid0(mddev_t *mddev)
 	mddev->recovery_cp = MaxSector;
 
 	conf = setup_conf(mddev);
-	conf->scale_disks = 2;
+	if (!IS_ERR(conf))
+		list_for_each_entry(rdev, &mddev->disks, same_set)
+			if (rdev->raid_disk >= 0)
+				rdev->new_raid_disk = rdev->raid_disk * 2;
+		
 	return conf;
 }
 
diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h
index 3824a087e17c..2316ac2e8e21 100644
--- a/drivers/md/raid10.h
+++ b/drivers/md/raid10.h
@@ -38,11 +38,6 @@ struct r10_private_data_s {
 	int chunk_shift; /* shift from chunks to sectors */
 	sector_t chunk_mask;
 
-	int			scale_disks;  /* When starting array, multiply
-					       * each ->raid_disk by this.
-					       * Need for raid0->raid10 migration
-					       */
-
 	struct list_head	retry_list;
 	/* queue pending writes and submit them on unplug */
 	struct bio_list		pending_bio_list;
-- 
cgit v1.2.3


From f73ea87375a1b2bf6c0be82bb9a3cb9d5ee7a407 Mon Sep 17 00:00:00 2001
From: Maciej Trela <maciej.trela@intel.com>
Date: Wed, 16 Jun 2010 11:46:29 +0100
Subject: md: fix raid10 takeover: use new_layout for setup_conf

Use mddev->new_layout in setup_conf.
Also use new_chunk, and don't set ->degraded in takeover().  That
gets set in run()

Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid10.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 1bab3559f3e2..42e64e4e5e25 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -2161,22 +2161,22 @@ static conf_t *setup_conf(mddev_t *mddev)
 	sector_t stride, size;
 	int err = -EINVAL;
 
-	if (mddev->chunk_sectors < (PAGE_SIZE >> 9) ||
-	    !is_power_of_2(mddev->chunk_sectors)) {
+	if (mddev->new_chunk_sectors < (PAGE_SIZE >> 9) ||
+	    !is_power_of_2(mddev->new_chunk_sectors)) {
 		printk(KERN_ERR "md/raid10:%s: chunk size must be "
 		       "at least PAGE_SIZE(%ld) and be a power of 2.\n",
 		       mdname(mddev), PAGE_SIZE);
 		goto out;
 	}
 
-	nc = mddev->layout & 255;
-	fc = (mddev->layout >> 8) & 255;
-	fo = mddev->layout & (1<<16);
+	nc = mddev->new_layout & 255;
+	fc = (mddev->new_layout >> 8) & 255;
+	fo = mddev->new_layout & (1<<16);
 
 	if ((nc*fc) <2 || (nc*fc) > mddev->raid_disks ||
-	    (mddev->layout >> 17)) {
+	    (mddev->new_layout >> 17)) {
 		printk(KERN_ERR "md/raid10:%s: unsupported raid10 layout: 0x%8x\n",
-		       mdname(mddev), mddev->layout);
+		       mdname(mddev), mddev->new_layout);
 		goto out;
 	}
 
@@ -2435,7 +2435,6 @@ static void *raid10_takeover_raid0(mddev_t *mddev)
 	mddev->new_layout = (1<<8) + 2;
 	mddev->new_chunk_sectors = mddev->chunk_sectors;
 	mddev->delta_disks = mddev->raid_disks;
-	mddev->degraded = mddev->raid_disks;
 	mddev->raid_disks *= 2;
 	/* make sure it will be not marked as dirty */
 	mddev->recovery_cp = MaxSector;
-- 
cgit v1.2.3


From 001048a318d48e93cb6a1246f3b20335b2a7c855 Mon Sep 17 00:00:00 2001
From: Maciej Trela <maciej.trela@intel.com>
Date: Wed, 16 Jun 2010 11:55:14 +0100
Subject: md: clear layout after ->raid0 takeover

After takeover from raid5/10 -> raid0 mddev->layout is not cleared.

Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid0.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 7c7c38058bc2..ac09b7d38553 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -592,6 +592,7 @@ static void *raid0_takeover_raid5(mddev_t *mddev)
 
 	/* Set new parameters */
 	mddev->new_level = 0;
+	mddev->new_layout = 0;
 	mddev->new_chunk_sectors = mddev->chunk_sectors;
 	mddev->raid_disks--;
 	mddev->delta_disks = -1;
@@ -631,6 +632,7 @@ static void *raid0_takeover_raid10(mddev_t *mddev)
 
 	/* Set new parameters */
 	mddev->new_level = 0;
+	mddev->new_layout = 0;
 	mddev->new_chunk_sectors = mddev->chunk_sectors;
 	mddev->delta_disks = - mddev->raid_disks / 2;
 	mddev->raid_disks += mddev->delta_disks;
-- 
cgit v1.2.3


From 049d6c1ef983c9ac43aa423dfd752071a5b0002d Mon Sep 17 00:00:00 2001
From: Maciej Trela <maciej.trela@intel.com>
Date: Wed, 16 Jun 2010 11:56:12 +0100
Subject: md: enable raid4->raid0 takeover

Only level 5 with layout=PARITY_N can be taken over to raid0 now.
Lets allow level 4 either.

Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid0.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index ac09b7d38553..563abed5a2cb 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -569,7 +569,7 @@ static void raid0_status(struct seq_file *seq, mddev_t *mddev)
 	return;
 }
 
-static void *raid0_takeover_raid5(mddev_t *mddev)
+static void *raid0_takeover_raid45(mddev_t *mddev)
 {
 	mdk_rdev_t *rdev;
 	raid0_conf_t *priv_conf;
@@ -647,12 +647,16 @@ static void *raid0_takeover_raid10(mddev_t *mddev)
 static void *raid0_takeover(mddev_t *mddev)
 {
 	/* raid0 can take over:
+	 *  raid4 - if all data disks are active.
 	 *  raid5 - providing it is Raid4 layout and one disk is faulty
 	 *  raid10 - assuming we have all necessary active disks
 	 */
+	if (mddev->level == 4)
+		return raid0_takeover_raid45(mddev);
+
 	if (mddev->level == 5) {
 		if (mddev->layout == ALGORITHM_PARITY_N)
-			return raid0_takeover_raid5(mddev);
+			return raid0_takeover_raid45(mddev);
 
 		printk(KERN_ERR "md/raid0:%s: Raid can only takeover Raid5 with layout: %d\n",
 		       mdname(mddev), ALGORITHM_PARITY_N);
-- 
cgit v1.2.3


From e4e11e385d1e5516ac76c956d6c25e6c2fa1b8d0 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Wed, 16 Jun 2010 16:45:16 +1000
Subject: md/raid5: avoid oops when number of devices is reduced then
 increased.

The entries in the stripe_cache maintained by raid5 are enlarged
when we increased the number of devices in the array, but not
shrunk when we reduce the number of devices.
So if entries are added after reducing the number of devices, we
much ensure to initialise the whole entry, not just the part that
is currently relevant.  Otherwise if we enlarge the array again,
we will reference uninitialised values.

As grow_buffers/shrink_buffer now want to use a count that is stored
explicity in the raid_conf, they should get it from there rather than
being passed it as a parameter.

Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid5.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index d2c0f94fa37d..2c055dec8c68 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -277,12 +277,13 @@ out:
 	return sh;
 }
 
-static void shrink_buffers(struct stripe_head *sh, int num)
+static void shrink_buffers(struct stripe_head *sh)
 {
 	struct page *p;
 	int i;
+	int num = sh->raid_conf->pool_size;
 
-	for (i=0; i<num ; i++) {
+	for (i = 0; i < num ; i++) {
 		p = sh->dev[i].page;
 		if (!p)
 			continue;
@@ -291,11 +292,12 @@ static void shrink_buffers(struct stripe_head *sh, int num)
 	}
 }
 
-static int grow_buffers(struct stripe_head *sh, int num)
+static int grow_buffers(struct stripe_head *sh)
 {
 	int i;
+	int num = sh->raid_conf->pool_size;
 
-	for (i=0; i<num; i++) {
+	for (i = 0; i < num; i++) {
 		struct page *page;
 
 		if (!(page = alloc_page(GFP_KERNEL))) {
@@ -1240,19 +1242,18 @@ static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request)
 static int grow_one_stripe(raid5_conf_t *conf)
 {
 	struct stripe_head *sh;
-	int disks = max(conf->raid_disks, conf->previous_raid_disks);
 	sh = kmem_cache_alloc(conf->slab_cache, GFP_KERNEL);
 	if (!sh)
 		return 0;
-	memset(sh, 0, sizeof(*sh) + (disks-1)*sizeof(struct r5dev));
+	memset(sh, 0, sizeof(*sh) + (conf->pool_size-1)*sizeof(struct r5dev));
 	sh->raid_conf = conf;
 	spin_lock_init(&sh->lock);
 	#ifdef CONFIG_MULTICORE_RAID456
 	init_waitqueue_head(&sh->ops.wait_for_ops);
 	#endif
 
-	if (grow_buffers(sh, disks)) {
-		shrink_buffers(sh, disks);
+	if (grow_buffers(sh)) {
+		shrink_buffers(sh);
 		kmem_cache_free(conf->slab_cache, sh);
 		return 0;
 	}
@@ -1468,7 +1469,7 @@ static int drop_one_stripe(raid5_conf_t *conf)
 	if (!sh)
 		return 0;
 	BUG_ON(atomic_read(&sh->count));
-	shrink_buffers(sh, conf->pool_size);
+	shrink_buffers(sh);
 	kmem_cache_free(conf->slab_cache, sh);
 	atomic_dec(&conf->active_stripes);
 	return 1;
-- 
cgit v1.2.3


From 70fffd0bfab1558a8c64c5e903dea1fb84cd9f6b Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Wed, 16 Jun 2010 17:01:25 +1000
Subject: md: Don't update ->recovery_offset when reshaping an array to fewer
 devices.

When an array is reshaped to have fewer devices, the reshape proceeds
from the end of the devices to the beginning.

If a device happens to be non-In_sync (which is possible but rare)
we would normally update the ->recovery_offset as the reshape
progresses. However that would be wrong as the recover_offset records
that the early part of the device is in_sync, while in fact it would
only be the later part that is in_sync, and in any case the offset
number would be measured from the wrong end of the device.

Relatedly, if after a reshape a spare is discovered to not be
recoverred all the way to the end, not allow spare_active
to incorporate it in the array.

This becomes relevant in the following sample scenario:

A 4 drive RAID5 is converted to a 6 drive RAID6 in a combined
operation.
The RAID5->RAID6 conversion will cause a 5 drive to be included as a
spare, then the 5drive -> 6drive reshape will effectively rebuild that
spare as it progresses.  The 6th drive is treated as in_sync the whole
time as there is never any case that we might consider reading from
it, but must not because there is no valid data.

If we interrupt this reshape part-way through and reverse it to return
to a 5-drive RAID6 (or event a 4-drive RAID5), we don't want to update
the recovery_offset - as that would be wrong - and we don't want to
include that spare as active in the 5-drive RAID6 when the reversed
reshape completed and it will be mostly out-of-sync still.

Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.c    | 2 ++
 drivers/md/raid5.c | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 4869128bf742..cb20d0b0555a 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2087,6 +2087,7 @@ static void sync_sbs(mddev_t * mddev, int nospares)
 	/* First make sure individual recovery_offsets are correct */
 	list_for_each_entry(rdev, &mddev->disks, same_set) {
 		if (rdev->raid_disk >= 0 &&
+		    mddev->delta_disks >= 0 &&
 		    !test_bit(In_sync, &rdev->flags) &&
 		    mddev->curr_resync_completed > rdev->recovery_offset)
 				rdev->recovery_offset = mddev->curr_resync_completed;
@@ -6872,6 +6873,7 @@ void md_do_sync(mddev_t *mddev)
 			rcu_read_lock();
 			list_for_each_entry_rcu(rdev, &mddev->disks, same_set)
 				if (rdev->raid_disk >= 0 &&
+				    mddev->delta_disks >= 0 &&
 				    !test_bit(Faulty, &rdev->flags) &&
 				    !test_bit(In_sync, &rdev->flags) &&
 				    rdev->recovery_offset < mddev->curr_resync)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 2c055dec8c68..f972a94bbc32 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5208,6 +5208,7 @@ static int raid5_spare_active(mddev_t *mddev)
 	for (i = 0; i < conf->raid_disks; i++) {
 		tmp = conf->disks + i;
 		if (tmp->rdev
+		    && tmp->rdev->recovery_offset == MaxSector
 		    && !test_bit(Faulty, &tmp->rdev->flags)
 		    && !test_and_set_bit(In_sync, &tmp->rdev->flags)) {
 			unsigned long flags;
-- 
cgit v1.2.3


From 674806d62fb02a22eea948c9f1b5e58e0947b728 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Wed, 16 Jun 2010 17:17:53 +1000
Subject: md/raid5: More careful check for "has array failed".

When we are reshaping an array, the device failure combinations
that cause us to decide that the array as failed are more subtle.

In particular, any 'spare' will be fully in-sync in the section
of the array that has already been reshaped, thus failures that
affect only that section are less critical.

So encode this subtlety in a new function and call it as appropriate.

The case that showed this problem was a 4 drive RAID5 to 8 drive RAID6
conversion where the last two devices failed.
This resulted in:

  good good good good incomplete good good failed failed

while converting a 5-drive RAID6 to 8 drive RAID5
The incomplete device causes the whole array to look bad,
bad as it was actually good for the section that had been
converted to 8-drives, all the data was actually safe.

Reported-by: Terry Morris <tbmorris@tbmorris.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid5.c | 75 +++++++++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 71 insertions(+), 4 deletions(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index f972a94bbc32..d4b233c25f2e 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -366,6 +366,73 @@ static struct stripe_head *__find_stripe(raid5_conf_t *conf, sector_t sector,
 	return NULL;
 }
 
+/*
+ * Need to check if array has failed when deciding whether to:
+ *  - start an array
+ *  - remove non-faulty devices
+ *  - add a spare
+ *  - allow a reshape
+ * This determination is simple when no reshape is happening.
+ * However if there is a reshape, we need to carefully check
+ * both the before and after sections.
+ * This is because some failed devices may only affect one
+ * of the two sections, and some non-in_sync devices may
+ * be insync in the section most affected by failed devices.
+ */
+static int has_failed(raid5_conf_t *conf)
+{
+	int degraded;
+	int i;
+	if (conf->mddev->reshape_position == MaxSector)
+		return conf->mddev->degraded > conf->max_degraded;
+
+	rcu_read_lock();
+	degraded = 0;
+	for (i = 0; i < conf->previous_raid_disks; i++) {
+		mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev);
+		if (!rdev || test_bit(Faulty, &rdev->flags))
+			degraded++;
+		else if (test_bit(In_sync, &rdev->flags))
+			;
+		else
+			/* not in-sync or faulty.
+			 * If the reshape increases the number of devices,
+			 * this is being recovered by the reshape, so
+			 * this 'previous' section is not in_sync.
+			 * If the number of devices is being reduced however,
+			 * the device can only be part of the array if
+			 * we are reverting a reshape, so this section will
+			 * be in-sync.
+			 */
+			if (conf->raid_disks >= conf->previous_raid_disks)
+				degraded++;
+	}
+	rcu_read_unlock();
+	if (degraded > conf->max_degraded)
+		return 1;
+	rcu_read_lock();
+	degraded = 0;
+	for (i = 0; i < conf->raid_disks; i++) {
+		mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev);
+		if (!rdev || test_bit(Faulty, &rdev->flags))
+			degraded++;
+		else if (test_bit(In_sync, &rdev->flags))
+			;
+		else
+			/* not in-sync or faulty.
+			 * If reshape increases the number of devices, this
+			 * section has already been recovered, else it
+			 * almost certainly hasn't.
+			 */
+			if (conf->raid_disks <= conf->previous_raid_disks)
+				degraded++;
+	}
+	rcu_read_unlock();
+	if (degraded > conf->max_degraded)
+		return 1;
+	return 0;
+}
+
 static void unplug_slaves(mddev_t *mddev);
 static void raid5_unplug_device(struct request_queue *q);
 
@@ -5006,7 +5073,7 @@ static int run(mddev_t *mddev)
 	mddev->degraded = (max(conf->raid_disks, conf->previous_raid_disks)
 			   - working_disks);
 
-	if (mddev->degraded > conf->max_degraded) {
+	if (has_failed(conf)) {
 		printk(KERN_ERR "md/raid:%s: not enough operational devices"
 			" (%d/%d failed)\n",
 			mdname(mddev), mddev->degraded, conf->raid_disks);
@@ -5244,7 +5311,7 @@ static int raid5_remove_disk(mddev_t *mddev, int number)
 		 * isn't possible.
 		 */
 		if (!test_bit(Faulty, &rdev->flags) &&
-		    mddev->degraded <= conf->max_degraded &&
+		    !has_failed(conf) &&
 		    number < conf->raid_disks) {
 			err = -EBUSY;
 			goto abort;
@@ -5272,7 +5339,7 @@ static int raid5_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
 	int first = 0;
 	int last = conf->raid_disks - 1;
 
-	if (mddev->degraded > conf->max_degraded)
+	if (has_failed(conf))
 		/* no point adding a device */
 		return -EINVAL;
 
@@ -5364,7 +5431,7 @@ static int check_reshape(mddev_t *mddev)
 	if (mddev->bitmap)
 		/* Cannot grow a bitmap yet */
 		return -EBUSY;
-	if (mddev->degraded > conf->max_degraded)
+	if (has_failed(conf))
 		return -EINVAL;
 	if (mddev->delta_disks < 0) {
 		/* We might be able to shrink, but the devices must
-- 
cgit v1.2.3


From 415e72d034c50520ddb7ff79e7d1792c1306f0c9 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Thu, 17 Jun 2010 17:25:21 +1000
Subject: md/raid5: Allow recovered part of partially recovered devices to be
 in-sync

During a recovery of reshape the early part of some devices might be
in-sync while the later parts are not.
We we know we are looking at an early part it is good to treat that
part as in-sync for stripe calculations.

This is particularly important for a reshape which suffers device
failure.  Treating the data as in-sync can mean the difference between
data-safety and data-loss.

Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid5.c | 42 ++++++++++++++++++++++++++++++------------
 1 file changed, 30 insertions(+), 12 deletions(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index d4b233c25f2e..09f07dadf404 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3031,7 +3031,6 @@ static void handle_stripe5(struct stripe_head *sh)
 		mdk_rdev_t *rdev;
 
 		dev = &sh->dev[i];
-		clear_bit(R5_Insync, &dev->flags);
 
 		pr_debug("check %d: state 0x%lx toread %p read %p write %p "
 			"written %p\n",	i, dev->flags, dev->toread, dev->read,
@@ -3068,17 +3067,27 @@ static void handle_stripe5(struct stripe_head *sh)
 			blocked_rdev = rdev;
 			atomic_inc(&rdev->nr_pending);
 		}
-		if (!rdev || !test_bit(In_sync, &rdev->flags)) {
+		clear_bit(R5_Insync, &dev->flags);
+		if (!rdev)
+			/* Not in-sync */;
+		else if (test_bit(In_sync, &rdev->flags))
+			set_bit(R5_Insync, &dev->flags);
+		else {
+			/* could be in-sync depending on recovery/reshape status */
+			if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset)
+				set_bit(R5_Insync, &dev->flags);
+		}
+		if (!test_bit(R5_Insync, &dev->flags)) {
 			/* The ReadError flag will just be confusing now */
 			clear_bit(R5_ReadError, &dev->flags);
 			clear_bit(R5_ReWrite, &dev->flags);
 		}
-		if (!rdev || !test_bit(In_sync, &rdev->flags)
-		    || test_bit(R5_ReadError, &dev->flags)) {
+		if (test_bit(R5_ReadError, &dev->flags))
+			clear_bit(R5_Insync, &dev->flags);
+		if (!test_bit(R5_Insync, &dev->flags)) {
 			s.failed++;
 			s.failed_num = i;
-		} else
-			set_bit(R5_Insync, &dev->flags);
+		}
 	}
 	rcu_read_unlock();
 
@@ -3312,7 +3321,6 @@ static void handle_stripe6(struct stripe_head *sh)
 	for (i=disks; i--; ) {
 		mdk_rdev_t *rdev;
 		dev = &sh->dev[i];
-		clear_bit(R5_Insync, &dev->flags);
 
 		pr_debug("check %d: state 0x%lx read %p write %p written %p\n",
 			i, dev->flags, dev->toread, dev->towrite, dev->written);
@@ -3350,18 +3358,28 @@ static void handle_stripe6(struct stripe_head *sh)
 			blocked_rdev = rdev;
 			atomic_inc(&rdev->nr_pending);
 		}
-		if (!rdev || !test_bit(In_sync, &rdev->flags)) {
+		clear_bit(R5_Insync, &dev->flags);
+		if (!rdev)
+			/* Not in-sync */;
+		else if (test_bit(In_sync, &rdev->flags))
+			set_bit(R5_Insync, &dev->flags);
+		else {
+			/* in sync if before recovery_offset */
+			if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset)
+				set_bit(R5_Insync, &dev->flags);
+		}
+		if (!test_bit(R5_Insync, &dev->flags)) {
 			/* The ReadError flag will just be confusing now */
 			clear_bit(R5_ReadError, &dev->flags);
 			clear_bit(R5_ReWrite, &dev->flags);
 		}
-		if (!rdev || !test_bit(In_sync, &rdev->flags)
-		    || test_bit(R5_ReadError, &dev->flags)) {
+		if (test_bit(R5_ReadError, &dev->flags))
+			clear_bit(R5_Insync, &dev->flags);
+		if (!test_bit(R5_Insync, &dev->flags)) {
 			if (s.failed < 2)
 				r6s.failed_num[s.failed] = i;
 			s.failed++;
-		} else
-			set_bit(R5_Insync, &dev->flags);
+		}
 	}
 	rcu_read_unlock();
 
-- 
cgit v1.2.3


From 2f115882499f3e5eca33d1df07b8876cc752a1ff Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Thu, 17 Jun 2010 17:41:03 +1000
Subject: md/raid5: add a missing 'continue' in a loop.

As the comment says, the tail of this loop only applies to devices
that are not fully in sync, so if In_sync was set, we should avoid
the rest of the loop.

This bug will hardly ever cause an actual problem.  The worst it
can do is allow an array to be assembled that is dirty and degraded,
which is not generally a good idea (without warning the sysadmin
first).

This will only happen if the array is RAID4 or a RAID5/6 in an
intermediate state during a reshape and so has one drive that is
all 'parity' - no data - while some other device has failed.

This is certainly possible, but not at all common.

Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid5.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 09f07dadf404..66cd47973398 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5057,8 +5057,10 @@ static int run(mddev_t *mddev)
 	list_for_each_entry(rdev, &mddev->disks, same_set) {
 		if (rdev->raid_disk < 0)
 			continue;
-		if (test_bit(In_sync, &rdev->flags))
+		if (test_bit(In_sync, &rdev->flags)) {
 			working_disks++;
+			continue;
+		}
 		/* This disc is not fully in-sync.  However if it
 		 * just stored parity (beyond the recovery_offset),
 		 * when we don't need to be concerned about the
-- 
cgit v1.2.3


From 3424bf6a772cff606fc4bc24a3639c937afb547f Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Thu, 17 Jun 2010 17:48:26 +1000
Subject: md/raid5: don't include 'spare' drives when reshaping to fewer
 devices.

There are few situations where it would make any sense to add a spare
when reducing the number of devices in an array, but it is
conceivable:  A 6 drive RAID6 with two missing devices could be
reshaped to a 5 drive RAID6, and a spare could become available
just in time for the reshape, but not early enough to have been
recovered first.  'freezing' recovery can make this easy to
do without any races.

However doing such a thing is a bad idea.  md will not record the
partially-recovered state of the 'spare' and when the reshape
finished it will think that the spare is still spare.
Easiest way to avoid this confusion is to simply disallow it.

Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid5.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 66cd47973398..96c690279fc6 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5526,8 +5526,13 @@ static int raid5_start_reshape(mddev_t *mddev)
 
 	/* Add some new drives, as many as will fit.
 	 * We know there are enough to make the newly sized array work.
+	 * Don't add devices if we are reducing the number of
+	 * devices in the array.  This is because it is not possible
+	 * to correctly record the "partially reconstructed" state of
+	 * such devices during the reshape and confusion could result.
 	 */
-	list_for_each_entry(rdev, &mddev->disks, same_set)
+	if (mddev->delta_disks >= 0)
+	    list_for_each_entry(rdev, &mddev->disks, same_set)
 		if (rdev->raid_disk < 0 &&
 		    !test_bit(Faulty, &rdev->flags)) {
 			if (raid5_add_disk(mddev, rdev) == 0) {
@@ -5549,7 +5554,7 @@ static int raid5_start_reshape(mddev_t *mddev)
 		}
 
 	/* When a reshape changes the number of devices, ->degraded
-	 * is measured against the large of the pre and post number of
+	 * is measured against the larger of the pre and post number of
 	 * devices.*/
 	if (mddev->delta_disks > 0) {
 		spin_lock_irqsave(&conf->device_lock, flags);
-- 
cgit v1.2.3


From b1312c89f0016f778cac4f1536f1434e132f8713 Mon Sep 17 00:00:00 2001
From: Timo Teräs <timo.teras@iki.fi>
Date: Thu, 24 Jun 2010 14:35:00 -0700
Subject: xfrm: check bundle policy existance before dereferencing it
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fix the bundle validation code to not assume having a valid policy.
When we have multiple transformations for a xfrm policy, the bundle
instance will be a chain of bundles with only the first one having
the policy reference. When policy_genid is bumped it will expire the
first bundle in the chain which is equivalent of expiring the whole
chain.

Reported-bisected-and-tested-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/xfrm/xfrm_policy.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 4bf27d901333..af1c173be4ad 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -2300,7 +2300,8 @@ int xfrm_bundle_ok(struct xfrm_policy *pol, struct xfrm_dst *first,
 			return 0;
 		if (xdst->xfrm_genid != dst->xfrm->genid)
 			return 0;
-		if (xdst->policy_genid != atomic_read(&xdst->pols[0]->genid))
+		if (xdst->num_pols > 0 &&
+		    xdst->policy_genid != atomic_read(&xdst->pols[0]->genid))
 			return 0;
 
 		if (strict && fl &&
-- 
cgit v1.2.3


From 523825bc586d19e0fbcfc5db717f5bb90108bbc3 Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Wed, 2 Jun 2010 16:26:51 +0200
Subject: ext2: update ctime when changing the file's permission by setfacl

ext2 didn't update the ctime of the file when its permission was changed.

Steps to reproduce:
 # touch aaa
 # stat -c %Z aaa
 1275289822
 # setfacl -m  'u::x,g::x,o::x' aaa
 # stat -c %Z aaa
 1275289822                         <- unchanged

But, according to the spec of the ctime, ext2 must update it.

Port of ext3 patch by Miao Xie <miaox@cn.fujitsu.com>.

Signed-off-by: Jan Kara <jack@suse.cz>
---
 fs/ext2/acl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/ext2/acl.c b/fs/ext2/acl.c
index ca7e2a0ed98a..2bcc0431bada 100644
--- a/fs/ext2/acl.c
+++ b/fs/ext2/acl.c
@@ -200,6 +200,7 @@ ext2_set_acl(struct inode *inode, int type, struct posix_acl *acl)
 					return error;
 				else {
 					inode->i_mode = mode;
+					inode->i_ctime = CURRENT_TIME_SEC;
 					mark_inode_dirty(inode);
 					if (error == 0)
 						acl = NULL;
-- 
cgit v1.2.3


From 30e2bab2d6e22188c6d36a09cdcffb4748d2dbe5 Mon Sep 17 00:00:00 2001
From: Miao Xie <miaox@cn.fujitsu.com>
Date: Thu, 27 May 2010 16:28:40 +0800
Subject: ext3: update ctime when changing the file's permission by setfacl

ext3 didn't update the ctime of the file when its permission was changed.

Steps to reproduce:
 # touch aaa
 # stat -c %Z aaa
 1275289822
 # setfacl -m  'u::x,g::x,o::x' aaa
 # stat -c %Z aaa
 1275289822				<- unchanged

But, according to the spec of the ctime, ext3 must update it.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Jan Kara <jack@suse.cz>
---
 fs/ext3/acl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/ext3/acl.c b/fs/ext3/acl.c
index 01552abbca3c..8a11fe212183 100644
--- a/fs/ext3/acl.c
+++ b/fs/ext3/acl.c
@@ -205,6 +205,7 @@ ext3_set_acl(handle_t *handle, struct inode *inode, int type,
 					return error;
 				else {
 					inode->i_mode = mode;
+					inode->i_ctime = CURRENT_TIME_SEC;
 					ext3_mark_inode_dirty(handle, inode);
 					if (error == 0)
 						acl = NULL;
-- 
cgit v1.2.3


From 3267a87f9dc38d036571ff0880533d9ae8989f01 Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Thu, 24 Jun 2010 19:10:40 -0700
Subject: MAINTAINERS - Add an entry for the input MT protocol

This patch adds a maintainer for the input multitouch (MT) protocol,
such that get_maintainer.pl selects it whenever an MT event is present
in the patch.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 6d119c98b89b..603413bc51bf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2887,6 +2887,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
 S:	Maintained
 F:	drivers/input/
 
+INPUT MULTITOUCH (MT) PROTOCOL
+M:	Henrik Rydberg <rydberg@euromail.se>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	Documentation/input/multi-touch-protocol.txt
+K:	\b(ABS|SYN)_MT_
+
 INTEL IDLE DRIVER
 M:	Len Brown <lenb@kernel.org>
 L:	linux-pm@lists.linux-foundation.org
-- 
cgit v1.2.3


From 1a61a83ff59378a5613d8c706c4a660c353b62a8 Mon Sep 17 00:00:00 2001
From: "Gustavo F. Padovan" <padovan@profusion.mobi>
Date: Fri, 18 Jun 2010 14:24:00 +0000
Subject: Bluetooth: Bring back var 'i' increment

commit ff6e2163f28a1094fb5ca5950fe2b43c3cf6bc7a accidentally added a
regression on the bnep code. Fixing it.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/bluetooth/bnep/netdev.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/bluetooth/bnep/netdev.c b/net/bluetooth/bnep/netdev.c
index 0faad5ce6dc4..8c100c9dae28 100644
--- a/net/bluetooth/bnep/netdev.c
+++ b/net/bluetooth/bnep/netdev.c
@@ -104,6 +104,8 @@ static void bnep_net_set_mc_list(struct net_device *dev)
 				break;
 			memcpy(__skb_put(skb, ETH_ALEN), ha->addr, ETH_ALEN);
 			memcpy(__skb_put(skb, ETH_ALEN), ha->addr, ETH_ALEN);
+
+			i++;
 		}
 		r->len = htons(skb->len - len);
 	}
-- 
cgit v1.2.3


From 0d98bb2656e9bd2dfda2d089db1fe1dbdab41504 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Mon, 24 May 2010 12:11:43 -0700
Subject: sched: Prevent compiler from optimising the sched_avg_update() loop

GCC 4.4.1 on ARM has been observed to replace the while loop in
sched_avg_update with a call to uldivmod, resulting in the
following build failure at link-time:

kernel/built-in.o: In function `sched_avg_update':
 kernel/sched.c:1261: undefined reference to `__aeabi_uldivmod'
 kernel/sched.c:1261: undefined reference to `__aeabi_uldivmod'
make: *** [.tmp_vmlinux1] Error 1

This patch introduces a fake data hazard to the loop body to
prevent the compiler optimising the loop away.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/kernel/sched.c b/kernel/sched.c
index 6c9e7c8735bf..a24d6d5d83f6 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1254,6 +1254,12 @@ static void sched_avg_update(struct rq *rq)
 	s64 period = sched_avg_period();
 
 	while ((s64)(rq->clock - rq->age_stamp) > period) {
+		/*
+		 * Inline assembly required to prevent the compiler
+		 * optimising this loop into a divmod call.
+		 * See __iter_div_u64_rem() for another example of this.
+		 */
+		asm("" : "+rm" (rq->age_stamp));
 		rq->age_stamp += period;
 		rq->rt_avg /= 2;
 	}
-- 
cgit v1.2.3


From 499a00e92dd9a75395081f595e681629eb1eebad Mon Sep 17 00:00:00 2001
From: "Darrick J. Wong" <djwong@us.ibm.com>
Date: Thu, 24 Jun 2010 14:26:47 -0700
Subject: x86, Calgary: Increase max PHB number

Newer systems (x3950M2) can have 48 PHBs per chassis and 8
chassis, so bump the limits up and provide an explanation
of the requirements for each class.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Corinna Schultz <cschultz@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
LKML-Reference: <20100624212647.GI15515@tux1.beaverton.ibm.com>
[ v2: Fixed build bug, added back PHBS_PER_CALGARY == 4 ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/pci-calgary_64.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index fb99f7edb341..0b96b5589f08 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -103,11 +103,16 @@ int use_calgary __read_mostly = 0;
 #define PMR_SOFTSTOPFAULT	0x40000000
 #define PMR_HARDSTOP		0x20000000
 
-#define MAX_NUM_OF_PHBS		8 /* how many PHBs in total? */
-#define MAX_NUM_CHASSIS		8 /* max number of chassis */
-/* MAX_PHB_BUS_NUM is the maximal possible dev->bus->number */
-#define MAX_PHB_BUS_NUM		(MAX_NUM_OF_PHBS * MAX_NUM_CHASSIS * 2)
-#define PHBS_PER_CALGARY	4
+/*
+ * The maximum PHB bus number.
+ * x3950M2 (rare): 8 chassis, 48 PHBs per chassis = 384
+ * x3950M2: 4 chassis, 48 PHBs per chassis        = 192
+ * x3950 (PCIE): 8 chassis, 32 PHBs per chassis   = 256
+ * x3950 (PCIX): 8 chassis, 16 PHBs per chassis   = 128
+ */
+#define MAX_PHB_BUS_NUM		384
+
+#define PHBS_PER_CALGARY	  4
 
 /* register offsets in Calgary's internal register space */
 static const unsigned long tar_offsets[] = {
-- 
cgit v1.2.3


From 9f888160bdcccf0565dd2774956b8d9456e610be Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Mon, 21 Jun 2010 11:00:13 +0000
Subject: ipv6: fix NULL reference in proxy neighbor discovery

The addition of TLLAO option created a kernel OOPS regression
for the case where neighbor advertisement is being sent via
proxy path.  When using proxy, ipv6_get_ifaddr() returns NULL
causing the NULL dereference.

Change causing the bug was:
commit f7734fdf61ec6bb848e0bafc1fb8bad2c124bb50
Author: Octavian Purdila <opurdila@ixiacom.com>
Date:   Fri Oct 2 11:39:15 2009 +0000

    make TLLAO option for NA packets configurable

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/ndisc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 0abdc242ddb7..2efef52fb461 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -586,6 +586,7 @@ static void ndisc_send_na(struct net_device *dev, struct neighbour *neigh,
 		src_addr = solicited_addr;
 		if (ifp->flags & IFA_F_OPTIMISTIC)
 			override = 0;
+		inc_opt |= ifp->idev->cnf.force_tllao;
 		in6_ifa_put(ifp);
 	} else {
 		if (ipv6_dev_get_saddr(dev_net(dev), dev, daddr,
@@ -599,7 +600,6 @@ static void ndisc_send_na(struct net_device *dev, struct neighbour *neigh,
 	icmp6h.icmp6_solicited = solicited;
 	icmp6h.icmp6_override = override;
 
-	inc_opt |= ifp->idev->cnf.force_tllao;
 	__ndisc_send(dev, neigh, daddr, src_addr,
 		     &icmp6h, solicited_addr,
 		     inc_opt ? ND_OPT_TARGET_LL_ADDR : 0);
-- 
cgit v1.2.3


From 9735b7ef005aaef5e5905cddba893f8725cd8867 Mon Sep 17 00:00:00 2001
From: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Date: Sat, 19 Jun 2010 15:24:27 +0000
Subject: smc91c92_cs: fix the problem that lan & modem does not work
 simultaneously

smc91c92_cs:
  Fix the problem that lan & modem does not work simultaneously
  in the Megahertz multi-function card.
  We need to write MEGAHERTZ_ISR to retrigger interrupt.

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/pcmcia/smc91c92_cs.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 64e6a84bbbbe..307cd1721e91 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -1505,12 +1505,20 @@ irq_done:
 	writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_LAN + CISREG_COR);
 	writeb(cor, smc->base + MOT_LAN + CISREG_COR);
     }
-#ifdef DOES_NOT_WORK
-    if (smc->base != NULL) { /* Megahertz MFC's */
-	readb(smc->base+MEGAHERTZ_ISR);
-	readb(smc->base+MEGAHERTZ_ISR);
+
+    if ((smc->base != NULL) &&  /* Megahertz MFC's */
+	(smc->manfid == MANFID_MEGAHERTZ) &&
+	(smc->cardid == PRODID_MEGAHERTZ_EM3288)) {
+
+	u_char tmp;
+	tmp = readb(smc->base+MEGAHERTZ_ISR);
+	tmp = readb(smc->base+MEGAHERTZ_ISR);
+
+	/* Retrigger interrupt if needed */
+	writeb(tmp, smc->base + MEGAHERTZ_ISR);
+	writeb(tmp, smc->base + MEGAHERTZ_ISR);
     }
-#endif
+
     spin_unlock(&smc->lock);
     return IRQ_RETVAL(handled);
 }
-- 
cgit v1.2.3


From ed770f01360b392564650bf1553ce723fa46afec Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Sun, 20 Jun 2010 22:07:48 +0000
Subject: cpmac: do not leak struct net_device on phy_connect errors

If the call to phy_connect fails, we will return directly instead of freeing
the previously allocated struct net_device.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
CC: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cpmac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 3c58db595285..23786ee34bed 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -1181,7 +1181,8 @@ static int __devinit cpmac_probe(struct platform_device *pdev)
 		if (netif_msg_drv(priv))
 			printk(KERN_ERR "%s: Could not attach to PHY\n",
 			       dev->name);
-		return PTR_ERR(priv->phy);
+		rc = PTR_ERR(priv->phy);
+		goto fail;
 	}
 
 	if ((rc = register_netdev(dev))) {
-- 
cgit v1.2.3


From e7752ee280608a24e27f163641121bdc2c68d6af Mon Sep 17 00:00:00 2001
From: Tilman Schmidt <tilman@imap.cc>
Date: Mon, 21 Jun 2010 13:54:19 +0000
Subject: isdn/gigaset: honor CAPI application's buffer size request

Fix the Gigaset CAPI driver to limit the length of a connection's
payload data receive buffers to the corresponding CAPI application's
data buffer size, as some real-life CAPI applications tend to be
rather unhappy if they receive bigger data blocks than requested.

Impact: bugfix
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/isdn/gigaset/asyncdata.c | 44 ++++++------------------
 drivers/isdn/gigaset/capi.c      |  8 +++++
 drivers/isdn/gigaset/common.c    | 32 +++++-------------
 drivers/isdn/gigaset/gigaset.h   | 29 +++++++++++-----
 drivers/isdn/gigaset/i4l.c       | 21 ++++++++++++
 drivers/isdn/gigaset/isocdata.c  | 72 ++++++++++++++--------------------------
 6 files changed, 94 insertions(+), 112 deletions(-)

diff --git a/drivers/isdn/gigaset/asyncdata.c b/drivers/isdn/gigaset/asyncdata.c
index c5016bd2d94f..c3b1dc3a13a0 100644
--- a/drivers/isdn/gigaset/asyncdata.c
+++ b/drivers/isdn/gigaset/asyncdata.c
@@ -126,26 +126,6 @@ static unsigned lock_loop(unsigned numbytes, struct inbuf_t *inbuf)
 	return numbytes;
 }
 
-/* set up next receive skb for data mode
- */
-static void new_rcv_skb(struct bc_state *bcs)
-{
-	struct cardstate *cs = bcs->cs;
-	unsigned short hw_hdr_len = cs->hw_hdr_len;
-
-	if (bcs->ignore) {
-		bcs->skb = NULL;
-		return;
-	}
-
-	bcs->skb = dev_alloc_skb(SBUFSIZE + hw_hdr_len);
-	if (bcs->skb == NULL) {
-		dev_warn(cs->dev, "could not allocate new skb\n");
-		return;
-	}
-	skb_reserve(bcs->skb, hw_hdr_len);
-}
-
 /* process a block of received bytes in HDLC data mode
  * (mstate != MS_LOCKED && !(inputstate & INS_command) && proto2 == L2_HDLC)
  * Collect HDLC frames, undoing byte stuffing and watching for DLE escapes.
@@ -159,8 +139,8 @@ static unsigned hdlc_loop(unsigned numbytes, struct inbuf_t *inbuf)
 	struct cardstate *cs = inbuf->cs;
 	struct bc_state *bcs = cs->bcs;
 	int inputstate = bcs->inputstate;
-	__u16 fcs = bcs->fcs;
-	struct sk_buff *skb = bcs->skb;
+	__u16 fcs = bcs->rx_fcs;
+	struct sk_buff *skb = bcs->rx_skb;
 	unsigned char *src = inbuf->data + inbuf->head;
 	unsigned procbytes = 0;
 	unsigned char c;
@@ -245,8 +225,7 @@ byte_stuff:
 
 				/* prepare reception of next frame */
 				inputstate &= ~INS_have_data;
-				new_rcv_skb(bcs);
-				skb = bcs->skb;
+				skb = gigaset_new_rx_skb(bcs);
 			} else {
 				/* empty frame (7E 7E) */
 #ifdef CONFIG_GIGASET_DEBUG
@@ -255,8 +234,7 @@ byte_stuff:
 				if (!skb) {
 					/* skipped (?) */
 					gigaset_isdn_rcv_err(bcs);
-					new_rcv_skb(bcs);
-					skb = bcs->skb;
+					skb = gigaset_new_rx_skb(bcs);
 				}
 			}
 
@@ -279,11 +257,11 @@ byte_stuff:
 #endif
 		inputstate |= INS_have_data;
 		if (skb) {
-			if (skb->len == SBUFSIZE) {
+			if (skb->len >= bcs->rx_bufsize) {
 				dev_warn(cs->dev, "received packet too long\n");
 				dev_kfree_skb_any(skb);
 				/* skip remainder of packet */
-				bcs->skb = skb = NULL;
+				bcs->rx_skb = skb = NULL;
 			} else {
 				*__skb_put(skb, 1) = c;
 				fcs = crc_ccitt_byte(fcs, c);
@@ -292,7 +270,7 @@ byte_stuff:
 	}
 
 	bcs->inputstate = inputstate;
-	bcs->fcs = fcs;
+	bcs->rx_fcs = fcs;
 	return procbytes;
 }
 
@@ -308,18 +286,18 @@ static unsigned iraw_loop(unsigned numbytes, struct inbuf_t *inbuf)
 	struct cardstate *cs = inbuf->cs;
 	struct bc_state *bcs = cs->bcs;
 	int inputstate = bcs->inputstate;
-	struct sk_buff *skb = bcs->skb;
+	struct sk_buff *skb = bcs->rx_skb;
 	unsigned char *src = inbuf->data + inbuf->head;
 	unsigned procbytes = 0;
 	unsigned char c;
 
 	if (!skb) {
 		/* skip this block */
-		new_rcv_skb(bcs);
+		gigaset_new_rx_skb(bcs);
 		return numbytes;
 	}
 
-	while (procbytes < numbytes && skb->len < SBUFSIZE) {
+	while (procbytes < numbytes && skb->len < bcs->rx_bufsize) {
 		c = *src++;
 		procbytes++;
 
@@ -343,7 +321,7 @@ static unsigned iraw_loop(unsigned numbytes, struct inbuf_t *inbuf)
 	if (inputstate & INS_have_data) {
 		gigaset_skb_rcvd(bcs, skb);
 		inputstate &= ~INS_have_data;
-		new_rcv_skb(bcs);
+		gigaset_new_rx_skb(bcs);
 	}
 
 	bcs->inputstate = inputstate;
diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c
index 8f78f15c8ef7..245a6083f79d 100644
--- a/drivers/isdn/gigaset/capi.c
+++ b/drivers/isdn/gigaset/capi.c
@@ -80,6 +80,7 @@ struct gigaset_capi_appl {
 	struct list_head ctrlist;
 	struct gigaset_capi_appl *bcnext;
 	u16 id;
+	struct capi_register_params rp;
 	u16 nextMessageNumber;
 	u32 listenInfoMask;
 	u32 listenCIPmask;
@@ -945,6 +946,7 @@ static void gigaset_register_appl(struct capi_ctr *ctr, u16 appl,
 		return;
 	}
 	ap->id = appl;
+	ap->rp = *rp;
 
 	list_add(&ap->ctrlist, &iif->appls);
 }
@@ -1166,6 +1168,9 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
 	}
 	ap->bcnext = NULL;
 	bcs->ap = ap;
+	bcs->rx_bufsize = ap->rp.datablklen;
+	dev_kfree_skb(bcs->rx_skb);
+	gigaset_new_rx_skb(bcs);
 	cmsg->adr.adrPLCI |= (bcs->channel + 1) << 8;
 
 	/* build command table */
@@ -1435,6 +1440,9 @@ static void do_connect_resp(struct gigaset_capi_ctr *iif,
 					CapiCallGivenToOtherApplication);
 		ap->bcnext = NULL;
 		bcs->ap = ap;
+		bcs->rx_bufsize = ap->rp.datablklen;
+		dev_kfree_skb(bcs->rx_skb);
+		gigaset_new_rx_skb(bcs);
 		bcs->chstate |= CHS_NOTIFY_LL;
 
 		/* check/encode B channel protocol */
diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c
index f6f45f221920..9778fabbc488 100644
--- a/drivers/isdn/gigaset/common.c
+++ b/drivers/isdn/gigaset/common.c
@@ -399,8 +399,8 @@ static void gigaset_freebcs(struct bc_state *bcs)
 	gig_dbg(DEBUG_INIT, "clearing bcs[%d]->at_state", bcs->channel);
 	clear_at_state(&bcs->at_state);
 	gig_dbg(DEBUG_INIT, "freeing bcs[%d]->skb", bcs->channel);
-	dev_kfree_skb(bcs->skb);
-	bcs->skb = NULL;
+	dev_kfree_skb(bcs->rx_skb);
+	bcs->rx_skb = NULL;
 
 	for (i = 0; i < AT_NUM; ++i) {
 		kfree(bcs->commands[i]);
@@ -634,19 +634,10 @@ static struct bc_state *gigaset_initbcs(struct bc_state *bcs,
 	bcs->emptycount = 0;
 #endif
 
-	gig_dbg(DEBUG_INIT, "allocating bcs[%d]->skb", channel);
-	bcs->fcs = PPP_INITFCS;
+	bcs->rx_bufsize = 0;
+	bcs->rx_skb = NULL;
+	bcs->rx_fcs = PPP_INITFCS;
 	bcs->inputstate = 0;
-	if (cs->ignoreframes) {
-		bcs->skb = NULL;
-	} else {
-		bcs->skb = dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
-		if (bcs->skb != NULL)
-			skb_reserve(bcs->skb, cs->hw_hdr_len);
-		else
-			pr_err("out of memory\n");
-	}
-
 	bcs->channel = channel;
 	bcs->cs = cs;
 
@@ -663,11 +654,6 @@ static struct bc_state *gigaset_initbcs(struct bc_state *bcs,
 		return bcs;
 
 	gig_dbg(DEBUG_INIT, "  failed");
-
-	gig_dbg(DEBUG_INIT, "  freeing bcs[%d]->skb", channel);
-	dev_kfree_skb(bcs->skb);
-	bcs->skb = NULL;
-
 	return NULL;
 }
 
@@ -839,14 +825,12 @@ void gigaset_bcs_reinit(struct bc_state *bcs)
 	bcs->emptycount = 0;
 #endif
 
-	bcs->fcs = PPP_INITFCS;
+	bcs->rx_fcs = PPP_INITFCS;
 	bcs->chstate = 0;
 
 	bcs->ignore = cs->ignoreframes;
-	if (bcs->ignore) {
-		dev_kfree_skb(bcs->skb);
-		bcs->skb = NULL;
-	}
+	dev_kfree_skb(bcs->rx_skb);
+	bcs->rx_skb = NULL;
 
 	cs->ops->reinitbcshw(bcs);
 }
diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h
index 05947f9c1849..f77ec54eb07d 100644
--- a/drivers/isdn/gigaset/gigaset.h
+++ b/drivers/isdn/gigaset/gigaset.h
@@ -45,10 +45,6 @@
 #define MAX_EVENTS 64		/* size of event queue */
 
 #define RBUFSIZE 8192
-#define SBUFSIZE 4096		/* sk_buff payload size */
-
-#define TRANSBUFSIZE 768	/* bytes per skb for transparent receive */
-#define MAX_BUF_SIZE (SBUFSIZE - 2)	/* Max. size of a data packet from LL */
 
 /* compile time options */
 #define GIG_MAJOR 0
@@ -380,8 +376,10 @@ struct bc_state {
 
 	struct at_state_t at_state;
 
-	__u16 fcs;
-	struct sk_buff *skb;
+	/* receive buffer */
+	unsigned rx_bufsize;		/* max size accepted by application */
+	struct sk_buff *rx_skb;
+	__u16 rx_fcs;
 	int inputstate;			/* see INS_XXXX */
 
 	int channel;
@@ -801,8 +799,23 @@ static inline void gigaset_bchannel_up(struct bc_state *bcs)
 	gigaset_schedule_event(bcs->cs);
 }
 
-/* handling routines for sk_buff */
-/* ============================= */
+/* set up next receive skb for data mode */
+static inline struct sk_buff *gigaset_new_rx_skb(struct bc_state *bcs)
+{
+	struct cardstate *cs = bcs->cs;
+	unsigned short hw_hdr_len = cs->hw_hdr_len;
+
+	if (bcs->ignore) {
+		bcs->rx_skb = NULL;
+	} else {
+		bcs->rx_skb = dev_alloc_skb(bcs->rx_bufsize + hw_hdr_len);
+		if (bcs->rx_skb == NULL)
+			dev_warn(cs->dev, "could not allocate skb\n");
+		else
+			skb_reserve(bcs->rx_skb, hw_hdr_len);
+	}
+	return bcs->rx_skb;
+}
 
 /* append received bytes to inbuf */
 int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src,
diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c
index c22e5ace8276..f01c3c2e2e46 100644
--- a/drivers/isdn/gigaset/i4l.c
+++ b/drivers/isdn/gigaset/i4l.c
@@ -16,7 +16,10 @@
 #include "gigaset.h"
 #include <linux/isdnif.h>
 
+#define SBUFSIZE	4096	/* sk_buff payload size */
+#define TRANSBUFSIZE	768	/* bytes per skb for transparent receive */
 #define HW_HDR_LEN	2	/* Header size used to store ack info */
+#define MAX_BUF_SIZE	(SBUFSIZE - HW_HDR_LEN)	/* max data packet from LL */
 
 /* == Handling of I4L IO =====================================================*/
 
@@ -231,6 +234,15 @@ static int command_from_LL(isdn_ctrl *cntrl)
 			dev_err(cs->dev, "ISDN_CMD_DIAL: channel not free\n");
 			return -EBUSY;
 		}
+		switch (bcs->proto2) {
+		case L2_HDLC:
+			bcs->rx_bufsize = SBUFSIZE;
+			break;
+		default:			/* assume transparent */
+			bcs->rx_bufsize = TRANSBUFSIZE;
+		}
+		dev_kfree_skb(bcs->rx_skb);
+		gigaset_new_rx_skb(bcs);
 
 		commands = kzalloc(AT_NUM*(sizeof *commands), GFP_ATOMIC);
 		if (!commands) {
@@ -314,6 +326,15 @@ static int command_from_LL(isdn_ctrl *cntrl)
 			return -EINVAL;
 		}
 		bcs = cs->bcs + ch;
+		switch (bcs->proto2) {
+		case L2_HDLC:
+			bcs->rx_bufsize = SBUFSIZE;
+			break;
+		default:			/* assume transparent */
+			bcs->rx_bufsize = TRANSBUFSIZE;
+		}
+		dev_kfree_skb(bcs->rx_skb);
+		gigaset_new_rx_skb(bcs);
 		if (!gigaset_add_event(cs, &bcs->at_state,
 				       EV_ACCEPT, NULL, 0, NULL))
 			return -ENOMEM;
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index 16fd3bd48883..2dfd346fc889 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -500,19 +500,18 @@ int gigaset_isoc_buildframe(struct bc_state *bcs, unsigned char *in, int len)
  */
 static inline void hdlc_putbyte(unsigned char c, struct bc_state *bcs)
 {
-	bcs->fcs = crc_ccitt_byte(bcs->fcs, c);
-	if (unlikely(bcs->skb == NULL)) {
+	bcs->rx_fcs = crc_ccitt_byte(bcs->rx_fcs, c);
+	if (bcs->rx_skb == NULL)
 		/* skipping */
 		return;
-	}
-	if (unlikely(bcs->skb->len == SBUFSIZE)) {
+	if (bcs->rx_skb->len >= bcs->rx_bufsize) {
 		dev_warn(bcs->cs->dev, "received oversized packet discarded\n");
 		bcs->hw.bas->giants++;
-		dev_kfree_skb_any(bcs->skb);
-		bcs->skb = NULL;
+		dev_kfree_skb_any(bcs->rx_skb);
+		bcs->rx_skb = NULL;
 		return;
 	}
-	*__skb_put(bcs->skb, 1) = c;
+	*__skb_put(bcs->rx_skb, 1) = c;
 }
 
 /* hdlc_flush
@@ -521,18 +520,13 @@ static inline void hdlc_putbyte(unsigned char c, struct bc_state *bcs)
 static inline void hdlc_flush(struct bc_state *bcs)
 {
 	/* clear skb or allocate new if not skipping */
-	if (likely(bcs->skb != NULL))
-		skb_trim(bcs->skb, 0);
-	else if (!bcs->ignore) {
-		bcs->skb = dev_alloc_skb(SBUFSIZE + bcs->cs->hw_hdr_len);
-		if (bcs->skb)
-			skb_reserve(bcs->skb, bcs->cs->hw_hdr_len);
-		else
-			dev_err(bcs->cs->dev, "could not allocate skb\n");
-	}
+	if (bcs->rx_skb != NULL)
+		skb_trim(bcs->rx_skb, 0);
+	else
+		gigaset_new_rx_skb(bcs);
 
 	/* reset packet state */
-	bcs->fcs = PPP_INITFCS;
+	bcs->rx_fcs = PPP_INITFCS;
 }
 
 /* hdlc_done
@@ -549,7 +543,7 @@ static inline void hdlc_done(struct bc_state *bcs)
 		hdlc_flush(bcs);
 		return;
 	}
-	procskb = bcs->skb;
+	procskb = bcs->rx_skb;
 	if (procskb == NULL) {
 		/* previous error */
 		gig_dbg(DEBUG_ISO, "%s: skb=NULL", __func__);
@@ -560,8 +554,8 @@ static inline void hdlc_done(struct bc_state *bcs)
 		bcs->hw.bas->runts++;
 		dev_kfree_skb_any(procskb);
 		gigaset_isdn_rcv_err(bcs);
-	} else if (bcs->fcs != PPP_GOODFCS) {
-		dev_notice(cs->dev, "frame check error (0x%04x)\n", bcs->fcs);
+	} else if (bcs->rx_fcs != PPP_GOODFCS) {
+		dev_notice(cs->dev, "frame check error\n");
 		bcs->hw.bas->fcserrs++;
 		dev_kfree_skb_any(procskb);
 		gigaset_isdn_rcv_err(bcs);
@@ -574,13 +568,8 @@ static inline void hdlc_done(struct bc_state *bcs)
 		bcs->hw.bas->goodbytes += len;
 		gigaset_skb_rcvd(bcs, procskb);
 	}
-
-	bcs->skb = dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
-	if (bcs->skb)
-		skb_reserve(bcs->skb, cs->hw_hdr_len);
-	else
-		dev_err(cs->dev, "could not allocate skb\n");
-	bcs->fcs = PPP_INITFCS;
+	gigaset_new_rx_skb(bcs);
+	bcs->rx_fcs = PPP_INITFCS;
 }
 
 /* hdlc_frag
@@ -597,8 +586,8 @@ static inline void hdlc_frag(struct bc_state *bcs, unsigned inbits)
 	dev_notice(bcs->cs->dev, "received partial byte (%d bits)\n", inbits);
 	bcs->hw.bas->alignerrs++;
 	gigaset_isdn_rcv_err(bcs);
-	__skb_trim(bcs->skb, 0);
-	bcs->fcs = PPP_INITFCS;
+	__skb_trim(bcs->rx_skb, 0);
+	bcs->rx_fcs = PPP_INITFCS;
 }
 
 /* bit counts lookup table for HDLC bit unstuffing
@@ -847,7 +836,6 @@ static inline void hdlc_unpack(unsigned char *src, unsigned count,
 static inline void trans_receive(unsigned char *src, unsigned count,
 				 struct bc_state *bcs)
 {
-	struct cardstate *cs = bcs->cs;
 	struct sk_buff *skb;
 	int dobytes;
 	unsigned char *dst;
@@ -857,17 +845,11 @@ static inline void trans_receive(unsigned char *src, unsigned count,
 		hdlc_flush(bcs);
 		return;
 	}
-	skb = bcs->skb;
-	if (unlikely(skb == NULL)) {
-		bcs->skb = skb = dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
-		if (!skb) {
-			dev_err(cs->dev, "could not allocate skb\n");
-			return;
-		}
-		skb_reserve(skb, cs->hw_hdr_len);
-	}
+	skb = bcs->rx_skb;
+	if (skb == NULL)
+		skb = gigaset_new_rx_skb(bcs);
 	bcs->hw.bas->goodbytes += skb->len;
-	dobytes = TRANSBUFSIZE - skb->len;
+	dobytes = bcs->rx_bufsize - skb->len;
 	while (count > 0) {
 		dst = skb_put(skb, count < dobytes ? count : dobytes);
 		while (count > 0 && dobytes > 0) {
@@ -879,14 +861,10 @@ static inline void trans_receive(unsigned char *src, unsigned count,
 			dump_bytes(DEBUG_STREAM_DUMP,
 				   "rcv data", skb->data, skb->len);
 			gigaset_skb_rcvd(bcs, skb);
-			bcs->skb = skb =
-				dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
-			if (!skb) {
-				dev_err(cs->dev, "could not allocate skb\n");
+			skb = gigaset_new_rx_skb(bcs);
+			if (skb == NULL)
 				return;
-			}
-			skb_reserve(skb, cs->hw_hdr_len);
-			dobytes = TRANSBUFSIZE;
+			dobytes = bcs->rx_bufsize;
 		}
 	}
 }
-- 
cgit v1.2.3


From 278a582989ade4cb5335762d6c5999562018859d Mon Sep 17 00:00:00 2001
From: Tilman Schmidt <tilman@imap.cc>
Date: Mon, 21 Jun 2010 13:54:35 +0000
Subject: isdn/gigaset: correct CAPI voice connection encoding

Make the Gigaset CAPI driver select L2_VOICE (AT^SBPR=2) as the
layer 2 encoding for transparent connections, like the ISDN4Linux
variant.  L2_BITSYNC (AT^SBPR=0) mutes internal connections and
distorts external ones.

Impact: bugfix
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/isdn/gigaset/capi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c
index 245a6083f79d..cb55ead557cc 100644
--- a/drivers/isdn/gigaset/capi.c
+++ b/drivers/isdn/gigaset/capi.c
@@ -1327,13 +1327,13 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
 			bcs->proto2 = L2_HDLC;
 			break;
 		case 1:
-			bcs->proto2 = L2_BITSYNC;
+			bcs->proto2 = L2_VOICE;
 			break;
 		default:
 			dev_warn(cs->dev,
 			    "B1 Protocol %u unsupported, using Transparent\n",
 				 cmsg->B1protocol);
-			bcs->proto2 = L2_BITSYNC;
+			bcs->proto2 = L2_VOICE;
 		}
 		if (cmsg->B2protocol != 1)
 			dev_warn(cs->dev,
@@ -1456,13 +1456,13 @@ static void do_connect_resp(struct gigaset_capi_ctr *iif,
 				bcs->proto2 = L2_HDLC;
 				break;
 			case 1:
-				bcs->proto2 = L2_BITSYNC;
+				bcs->proto2 = L2_VOICE;
 				break;
 			default:
 				dev_warn(cs->dev,
 			"B1 Protocol %u unsupported, using Transparent\n",
 					 cmsg->B1protocol);
-				bcs->proto2 = L2_BITSYNC;
+				bcs->proto2 = L2_VOICE;
 			}
 			if (cmsg->B2protocol != 1)
 				dev_warn(cs->dev,
-- 
cgit v1.2.3


From 23b36778b4c82577746d26e4ac0ae66c6f462475 Mon Sep 17 00:00:00 2001
From: Tilman Schmidt <tilman@imap.cc>
Date: Mon, 21 Jun 2010 13:54:50 +0000
Subject: isdn/gigaset: correct CAPI DATA_B3 Delivery Confirmation

The Gigaset CAPI driver handled all DATA_B3_REQ messages as if the
Delivery Confirmation flag bit was set, delaying the emission of the
DATA_B3_CONF reply until the data was actually transmitted. Some
CAPI applications (notably Asterisk) aren't happy with that
behaviour. Change it to actually evaluate the Delivery Confirmation
flag as described the CAPI specification.

Impact: bugfix
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/isdn/gigaset/capi.c | 83 ++++++++++++++++++++++++++++-----------------
 1 file changed, 51 insertions(+), 32 deletions(-)

diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c
index cb55ead557cc..e685123fef48 100644
--- a/drivers/isdn/gigaset/capi.c
+++ b/drivers/isdn/gigaset/capi.c
@@ -320,6 +320,39 @@ static const char *format_ie(const char *ie)
 	return result;
 }
 
+/*
+ * emit DATA_B3_CONF message
+ */
+static void send_data_b3_conf(struct cardstate *cs, struct capi_ctr *ctr,
+			      u16 appl, u16 msgid, int channel,
+			      u16 handle, u16 info)
+{
+	struct sk_buff *cskb;
+	u8 *msg;
+
+	cskb = alloc_skb(CAPI_DATA_B3_CONF_LEN, GFP_ATOMIC);
+	if (!cskb) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		return;
+	}
+	/* frequent message, avoid _cmsg overhead */
+	msg = __skb_put(cskb, CAPI_DATA_B3_CONF_LEN);
+	CAPIMSG_SETLEN(msg, CAPI_DATA_B3_CONF_LEN);
+	CAPIMSG_SETAPPID(msg, appl);
+	CAPIMSG_SETCOMMAND(msg, CAPI_DATA_B3);
+	CAPIMSG_SETSUBCOMMAND(msg,  CAPI_CONF);
+	CAPIMSG_SETMSGID(msg, msgid);
+	CAPIMSG_SETCONTROLLER(msg, ctr->cnr);
+	CAPIMSG_SETPLCI_PART(msg, channel);
+	CAPIMSG_SETNCCI_PART(msg, 1);
+	CAPIMSG_SETHANDLE_CONF(msg, handle);
+	CAPIMSG_SETINFO_CONF(msg, info);
+
+	/* emit message */
+	dump_rawmsg(DEBUG_MCMD, __func__, msg);
+	capi_ctr_handle_message(ctr, appl, cskb);
+}
+
 
 /*
  * driver interface functions
@@ -340,7 +373,6 @@ void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *dskb)
 	struct gigaset_capi_ctr *iif = cs->iif;
 	struct gigaset_capi_appl *ap = bcs->ap;
 	unsigned char *req = skb_mac_header(dskb);
-	struct sk_buff *cskb;
 	u16 flags;
 
 	/* update statistics */
@@ -357,34 +389,17 @@ void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *dskb)
 		return;
 	}
 
-	/* ToDo: honor unset "delivery confirmation" bit */
+	/*
+	 * send DATA_B3_CONF if "delivery confirmation" bit was set in request;
+	 * otherwise it has already been sent by do_data_b3_req()
+	 */
 	flags = CAPIMSG_FLAGS(req);
-
-	/* build DATA_B3_CONF message */
-	cskb = alloc_skb(CAPI_DATA_B3_CONF_LEN, GFP_ATOMIC);
-	if (!cskb) {
-		dev_err(cs->dev, "%s: out of memory\n", __func__);
-		return;
-	}
-	/* frequent message, avoid _cmsg overhead */
-	CAPIMSG_SETLEN(cskb->data, CAPI_DATA_B3_CONF_LEN);
-	CAPIMSG_SETAPPID(cskb->data, ap->id);
-	CAPIMSG_SETCOMMAND(cskb->data, CAPI_DATA_B3);
-	CAPIMSG_SETSUBCOMMAND(cskb->data,  CAPI_CONF);
-	CAPIMSG_SETMSGID(cskb->data, CAPIMSG_MSGID(req));
-	CAPIMSG_SETCONTROLLER(cskb->data, iif->ctr.cnr);
-	CAPIMSG_SETPLCI_PART(cskb->data, bcs->channel + 1);
-	CAPIMSG_SETNCCI_PART(cskb->data, 1);
-	CAPIMSG_SETHANDLE_CONF(cskb->data, CAPIMSG_HANDLE_REQ(req));
-	if (flags & ~CAPI_FLAGS_DELIVERY_CONFIRMATION)
-		CAPIMSG_SETINFO_CONF(cskb->data,
-				     CapiFlagsNotSupportedByProtocol);
-	else
-		CAPIMSG_SETINFO_CONF(cskb->data, CAPI_NOERROR);
-
-	/* emit message */
-	dump_rawmsg(DEBUG_LLDATA, "DATA_B3_CONF", cskb->data);
-	capi_ctr_handle_message(&iif->ctr, ap->id, cskb);
+	if (flags & CAPI_FLAGS_DELIVERY_CONFIRMATION)
+		send_data_b3_conf(cs, &iif->ctr, ap->id, CAPIMSG_MSGID(req),
+				  bcs->channel + 1, CAPIMSG_HANDLE_REQ(req),
+				  (flags & ~CAPI_FLAGS_DELIVERY_CONFIRMATION) ?
+					CapiFlagsNotSupportedByProtocol :
+					CAPI_NOERROR);
 }
 EXPORT_SYMBOL_GPL(gigaset_skb_sent);
 
@@ -1795,6 +1810,8 @@ static void do_data_b3_req(struct gigaset_capi_ctr *iif,
 	u16 msglen = CAPIMSG_LEN(skb->data);
 	u16 datalen = CAPIMSG_DATALEN(skb->data);
 	u16 flags = CAPIMSG_FLAGS(skb->data);
+	u16 msgid = CAPIMSG_MSGID(skb->data);
+	u16 handle = CAPIMSG_HANDLE_REQ(skb->data);
 
 	/* frequent message, avoid _cmsg overhead */
 	dump_rawmsg(DEBUG_LLDATA, "DATA_B3_REQ", skb->data);
@@ -1845,12 +1862,14 @@ static void do_data_b3_req(struct gigaset_capi_ctr *iif,
 		return;
 	}
 
-	/* DATA_B3_CONF reply will be sent by gigaset_skb_sent() */
-
 	/*
-	 * ToDo: honor unset "delivery confirmation" bit
-	 * (send DATA_B3_CONF immediately?)
+	 * DATA_B3_CONF will be sent by gigaset_skb_sent() only if "delivery
+	 * confirmation" bit is set; otherwise we have to send it now
 	 */
+	if (!(flags & CAPI_FLAGS_DELIVERY_CONFIRMATION))
+		send_data_b3_conf(cs, &iif->ctr, ap->id, msgid, channel, handle,
+				  flags ? CapiFlagsNotSupportedByProtocol
+					: CAPI_NOERROR);
 }
 
 /*
-- 
cgit v1.2.3


From 1ce368ff288ed872a8fee93b8a2b7706111feb9a Mon Sep 17 00:00:00 2001
From: Tilman Schmidt <tilman@imap.cc>
Date: Mon, 21 Jun 2010 13:55:05 +0000
Subject: isdn/gigaset: encode HLC and BC together

Adapt to buggy device firmware which accepts setting HLC only in the
same command line as BC, by encoding HLC and BC in a single command
if both are specified, and rejecting HLC without BC.

Impact: bugfix
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/isdn/gigaset/capi.c     | 81 +++++++++++++++++++++++++----------------
 drivers/isdn/gigaset/ev-layer.c |  4 +-
 drivers/isdn/gigaset/gigaset.h  |  5 +--
 3 files changed, 52 insertions(+), 38 deletions(-)

diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c
index e685123fef48..665673f4d667 100644
--- a/drivers/isdn/gigaset/capi.c
+++ b/drivers/isdn/gigaset/capi.c
@@ -1166,7 +1166,7 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
 	char **commands;
 	char *s;
 	u8 *pp;
-	int i, l;
+	int i, l, lbc, lhlc;
 	u16 info;
 
 	/* decode message */
@@ -1293,42 +1293,59 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
 		goto error;
 	}
 
-	/* check/encode parameter: BC */
-	if (cmsg->BC && cmsg->BC[0]) {
-		/* explicit BC overrides CIP */
-		l = 2*cmsg->BC[0] + 7;
+	/*
+	 * check/encode parameters: BC & HLC
+	 * must be encoded together as device doesn't accept HLC separately
+	 * explicit parameters override values derived from CIP
+	 */
+
+	/* determine lengths */
+	if (cmsg->BC && cmsg->BC[0])		/* BC specified explicitly */
+		lbc = 2*cmsg->BC[0];
+	else if (cip2bchlc[cmsg->CIPValue].bc)	/* BC derived from CIP */
+		lbc = strlen(cip2bchlc[cmsg->CIPValue].bc);
+	else					/* no BC */
+		lbc = 0;
+	if (cmsg->HLC && cmsg->HLC[0])		/* HLC specified explicitly */
+		lhlc = 2*cmsg->HLC[0];
+	else if (cip2bchlc[cmsg->CIPValue].hlc)	/* HLC derived from CIP */
+		lhlc = strlen(cip2bchlc[cmsg->CIPValue].hlc);
+	else					/* no HLC */
+		lhlc = 0;
+
+	if (lbc) {
+		/* have BC: allocate and assemble command string */
+		l = lbc + 7;		/* "^SBC=" + value + "\r" + null byte */
+		if (lhlc)
+			l += lhlc + 7;	/* ";^SHLC=" + value */
 		commands[AT_BC] = kmalloc(l, GFP_KERNEL);
 		if (!commands[AT_BC])
 			goto oom;
 		strcpy(commands[AT_BC], "^SBC=");
-		decode_ie(cmsg->BC, commands[AT_BC]+5);
+		if (cmsg->BC && cmsg->BC[0])	/* BC specified explicitly */
+			decode_ie(cmsg->BC, commands[AT_BC] + 5);
+		else				/* BC derived from CIP */
+			strcpy(commands[AT_BC] + 5,
+			       cip2bchlc[cmsg->CIPValue].bc);
+		if (lhlc) {
+			strcpy(commands[AT_BC] + lbc + 5, ";^SHLC=");
+			if (cmsg->HLC && cmsg->HLC[0])
+				/* HLC specified explicitly */
+				decode_ie(cmsg->HLC,
+					  commands[AT_BC] + lbc + 12);
+			else	/* HLC derived from CIP */
+				strcpy(commands[AT_BC] + lbc + 12,
+				       cip2bchlc[cmsg->CIPValue].hlc);
+		}
 		strcpy(commands[AT_BC] + l - 2, "\r");
-	} else if (cip2bchlc[cmsg->CIPValue].bc) {
-		l = strlen(cip2bchlc[cmsg->CIPValue].bc) + 7;
-		commands[AT_BC] = kmalloc(l, GFP_KERNEL);
-		if (!commands[AT_BC])
-			goto oom;
-		snprintf(commands[AT_BC], l, "^SBC=%s\r",
-			 cip2bchlc[cmsg->CIPValue].bc);
-	}
-
-	/* check/encode parameter: HLC */
-	if (cmsg->HLC && cmsg->HLC[0]) {
-		/* explicit HLC overrides CIP */
-		l = 2*cmsg->HLC[0] + 7;
-		commands[AT_HLC] = kmalloc(l, GFP_KERNEL);
-		if (!commands[AT_HLC])
-			goto oom;
-		strcpy(commands[AT_HLC], "^SHLC=");
-		decode_ie(cmsg->HLC, commands[AT_HLC]+5);
-		strcpy(commands[AT_HLC] + l - 2, "\r");
-	} else if (cip2bchlc[cmsg->CIPValue].hlc) {
-		l = strlen(cip2bchlc[cmsg->CIPValue].hlc) + 7;
-		commands[AT_HLC] = kmalloc(l, GFP_KERNEL);
-		if (!commands[AT_HLC])
-			goto oom;
-		snprintf(commands[AT_HLC], l, "^SHLC=%s\r",
-			 cip2bchlc[cmsg->CIPValue].hlc);
+	} else {
+		/* no BC */
+		if (lhlc) {
+			dev_notice(cs->dev, "%s: cannot set HLC without BC\n",
+				   "CONNECT_REQ");
+			info = CapiIllMessageParmCoding; /* ? */
+			goto error;
+		}
 	}
 
 	/* check/encode parameter: B Protocol */
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index 206c380c5235..ceaef9a04a42 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -282,9 +282,7 @@ struct reply_t gigaset_tab_cid[] =
 /* dial */
 {EV_DIAL,	 -1,  -1, -1,			 -1, -1, {ACT_DIAL} },
 {RSP_INIT,	  0,   0, SEQ_DIAL,		601,  5, {ACT_CMD+AT_BC} },
-{RSP_OK,	601, 601, -1,			602,  5, {ACT_CMD+AT_HLC} },
-{RSP_NULL,	602, 602, -1,			603,  5, {ACT_CMD+AT_PROTO} },
-{RSP_OK,	602, 602, -1,			603,  5, {ACT_CMD+AT_PROTO} },
+{RSP_OK,	601, 601, -1,			603,  5, {ACT_CMD+AT_PROTO} },
 {RSP_OK,	603, 603, -1,			604,  5, {ACT_CMD+AT_TYPE} },
 {RSP_OK,	604, 604, -1,			605,  5, {ACT_CMD+AT_MSN} },
 {RSP_NULL,	605, 605, -1,			606,  5, {ACT_CMD+AT_CLIP} },
diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h
index f77ec54eb07d..c4e6c26897ea 100644
--- a/drivers/isdn/gigaset/gigaset.h
+++ b/drivers/isdn/gigaset/gigaset.h
@@ -186,10 +186,9 @@ void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
 #define AT_BC		3
 #define AT_PROTO	4
 #define AT_TYPE		5
-#define AT_HLC		6
-#define AT_CLIP		7
+#define AT_CLIP		6
 /* total number */
-#define AT_NUM		8
+#define AT_NUM		7
 
 /* variables in struct at_state_t */
 #define VAR_ZSAU	0
-- 
cgit v1.2.3


From 1b4843c5e8cbab86830da8a53b8288882060c059 Mon Sep 17 00:00:00 2001
From: Tilman Schmidt <tilman@imap.cc>
Date: Mon, 21 Jun 2010 13:55:20 +0000
Subject: isdn/gigaset: correct CAPI connection state storage

CAPI applications can handle several connections in parallel,
so one connection state per application isn't sufficient.
Store the connection state in the channel structure instead.

Impact: bugfix
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/isdn/gigaset/capi.c    | 225 +++++++++++++++++++++++++++++++----------
 drivers/isdn/gigaset/common.c  |   4 +
 drivers/isdn/gigaset/gigaset.h |   4 +-
 3 files changed, 180 insertions(+), 53 deletions(-)

diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c
index 665673f4d667..6fbe8999c419 100644
--- a/drivers/isdn/gigaset/capi.c
+++ b/drivers/isdn/gigaset/capi.c
@@ -70,7 +70,7 @@
 #define MAX_NUMBER_DIGITS 20
 #define MAX_FMT_IE_LEN 20
 
-/* values for gigaset_capi_appl.connected */
+/* values for bcs->apconnstate */
 #define APCONN_NONE	0	/* inactive/listening */
 #define APCONN_SETUP	1	/* connecting */
 #define APCONN_ACTIVE	2	/* B channel up */
@@ -84,7 +84,6 @@ struct gigaset_capi_appl {
 	u16 nextMessageNumber;
 	u32 listenInfoMask;
 	u32 listenCIPmask;
-	int connected;
 };
 
 /* CAPI specific controller data structure */
@@ -384,7 +383,7 @@ void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *dskb)
 	}
 
 	/* don't send further B3 messages if disconnected */
-	if (ap->connected < APCONN_ACTIVE) {
+	if (bcs->apconnstate < APCONN_ACTIVE) {
 		gig_dbg(DEBUG_LLDATA, "disconnected, discarding ack");
 		return;
 	}
@@ -428,7 +427,7 @@ void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb)
 	}
 
 	/* don't send further B3 messages if disconnected */
-	if (ap->connected < APCONN_ACTIVE) {
+	if (bcs->apconnstate < APCONN_ACTIVE) {
 		gig_dbg(DEBUG_LLDATA, "disconnected, discarding data");
 		dev_kfree_skb_any(skb);
 		return;
@@ -500,6 +499,7 @@ int gigaset_isdn_icall(struct at_state_t *at_state)
 	u32 actCIPmask;
 	struct sk_buff *skb;
 	unsigned int msgsize;
+	unsigned long flags;
 	int i;
 
 	/*
@@ -624,7 +624,14 @@ int gigaset_isdn_icall(struct at_state_t *at_state)
 		format_ie(iif->hcmsg.CalledPartyNumber));
 
 	/* scan application list for matching listeners */
-	bcs->ap = NULL;
+	spin_lock_irqsave(&bcs->aplock, flags);
+	if (bcs->ap != NULL || bcs->apconnstate != APCONN_NONE) {
+		dev_warn(cs->dev, "%s: channel not properly cleared (%p/%d)\n",
+			 __func__, bcs->ap, bcs->apconnstate);
+		bcs->ap = NULL;
+		bcs->apconnstate = APCONN_NONE;
+	}
+	spin_unlock_irqrestore(&bcs->aplock, flags);
 	actCIPmask = 1 | (1 << iif->hcmsg.CIPValue);
 	list_for_each_entry(ap, &iif->appls, ctrlist)
 		if (actCIPmask & ap->listenCIPmask) {
@@ -642,10 +649,12 @@ int gigaset_isdn_icall(struct at_state_t *at_state)
 			dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
 
 			/* add to listeners on this B channel, update state */
+			spin_lock_irqsave(&bcs->aplock, flags);
 			ap->bcnext = bcs->ap;
 			bcs->ap = ap;
 			bcs->chstate |= CHS_NOTIFY_LL;
-			ap->connected = APCONN_SETUP;
+			bcs->apconnstate = APCONN_SETUP;
+			spin_unlock_irqrestore(&bcs->aplock, flags);
 
 			/* emit message */
 			capi_ctr_handle_message(&iif->ctr, ap->id, skb);
@@ -670,7 +679,7 @@ static void send_disconnect_ind(struct bc_state *bcs,
 	struct gigaset_capi_ctr *iif = cs->iif;
 	struct sk_buff *skb;
 
-	if (ap->connected == APCONN_NONE)
+	if (bcs->apconnstate == APCONN_NONE)
 		return;
 
 	capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_DISCONNECT, CAPI_IND,
@@ -684,7 +693,6 @@ static void send_disconnect_ind(struct bc_state *bcs,
 	}
 	capi_cmsg2message(&iif->hcmsg, __skb_put(skb, CAPI_DISCONNECT_IND_LEN));
 	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
-	ap->connected = APCONN_NONE;
 	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
 }
 
@@ -701,9 +709,9 @@ static void send_disconnect_b3_ind(struct bc_state *bcs,
 	struct sk_buff *skb;
 
 	/* nothing to do if no logical connection active */
-	if (ap->connected < APCONN_ACTIVE)
+	if (bcs->apconnstate < APCONN_ACTIVE)
 		return;
-	ap->connected = APCONN_SETUP;
+	bcs->apconnstate = APCONN_SETUP;
 
 	capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND,
 			 ap->nextMessageNumber++,
@@ -730,14 +738,25 @@ void gigaset_isdn_connD(struct bc_state *bcs)
 {
 	struct cardstate *cs = bcs->cs;
 	struct gigaset_capi_ctr *iif = cs->iif;
-	struct gigaset_capi_appl *ap = bcs->ap;
+	struct gigaset_capi_appl *ap;
 	struct sk_buff *skb;
 	unsigned int msgsize;
+	unsigned long flags;
 
+	spin_lock_irqsave(&bcs->aplock, flags);
+	ap = bcs->ap;
 	if (!ap) {
+		spin_unlock_irqrestore(&bcs->aplock, flags);
 		dev_err(cs->dev, "%s: no application\n", __func__);
 		return;
 	}
+	if (bcs->apconnstate == APCONN_NONE) {
+		spin_unlock_irqrestore(&bcs->aplock, flags);
+		dev_warn(cs->dev, "%s: application %u not connected\n",
+			 __func__, ap->id);
+		return;
+	}
+	spin_unlock_irqrestore(&bcs->aplock, flags);
 	while (ap->bcnext) {
 		/* this should never happen */
 		dev_warn(cs->dev, "%s: dropping extra application %u\n",
@@ -746,11 +765,6 @@ void gigaset_isdn_connD(struct bc_state *bcs)
 				    CapiCallGivenToOtherApplication);
 		ap->bcnext = ap->bcnext->bcnext;
 	}
-	if (ap->connected == APCONN_NONE) {
-		dev_warn(cs->dev, "%s: application %u not connected\n",
-			 __func__, ap->id);
-		return;
-	}
 
 	/* prepare CONNECT_ACTIVE_IND message
 	 * Note: LLC not supported by device
@@ -788,17 +802,24 @@ void gigaset_isdn_connD(struct bc_state *bcs)
 void gigaset_isdn_hupD(struct bc_state *bcs)
 {
 	struct gigaset_capi_appl *ap;
+	unsigned long flags;
 
 	/*
 	 * ToDo: pass on reason code reported by device
 	 * (requires ev-layer state machine extension to collect
 	 * ZCAU device reply)
 	 */
-	for (ap = bcs->ap; ap != NULL; ap = ap->bcnext) {
+	spin_lock_irqsave(&bcs->aplock, flags);
+	while (bcs->ap != NULL) {
+		ap = bcs->ap;
+		bcs->ap = ap->bcnext;
+		spin_unlock_irqrestore(&bcs->aplock, flags);
 		send_disconnect_b3_ind(bcs, ap);
 		send_disconnect_ind(bcs, ap, 0);
+		spin_lock_irqsave(&bcs->aplock, flags);
 	}
-	bcs->ap = NULL;
+	bcs->apconnstate = APCONN_NONE;
+	spin_unlock_irqrestore(&bcs->aplock, flags);
 }
 
 /**
@@ -812,24 +833,21 @@ void gigaset_isdn_connB(struct bc_state *bcs)
 {
 	struct cardstate *cs = bcs->cs;
 	struct gigaset_capi_ctr *iif = cs->iif;
-	struct gigaset_capi_appl *ap = bcs->ap;
+	struct gigaset_capi_appl *ap;
 	struct sk_buff *skb;
+	unsigned long flags;
 	unsigned int msgsize;
 	u8 command;
 
+	spin_lock_irqsave(&bcs->aplock, flags);
+	ap = bcs->ap;
 	if (!ap) {
+		spin_unlock_irqrestore(&bcs->aplock, flags);
 		dev_err(cs->dev, "%s: no application\n", __func__);
 		return;
 	}
-	while (ap->bcnext) {
-		/* this should never happen */
-		dev_warn(cs->dev, "%s: dropping extra application %u\n",
-			 __func__, ap->bcnext->id);
-		send_disconnect_ind(bcs, ap->bcnext,
-				    CapiCallGivenToOtherApplication);
-		ap->bcnext = ap->bcnext->bcnext;
-	}
-	if (!ap->connected) {
+	if (!bcs->apconnstate) {
+		spin_unlock_irqrestore(&bcs->aplock, flags);
 		dev_warn(cs->dev, "%s: application %u not connected\n",
 			 __func__, ap->id);
 		return;
@@ -841,13 +859,26 @@ void gigaset_isdn_connB(struct bc_state *bcs)
 	 * CONNECT_B3_ACTIVE_IND in reply to CONNECT_B3_RESP
 	 * Parameters in both cases always: NCCI = 1, NCPI empty
 	 */
-	if (ap->connected >= APCONN_ACTIVE) {
+	if (bcs->apconnstate >= APCONN_ACTIVE) {
 		command = CAPI_CONNECT_B3_ACTIVE;
 		msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN;
 	} else {
 		command = CAPI_CONNECT_B3;
 		msgsize = CAPI_CONNECT_B3_IND_BASELEN;
 	}
+	bcs->apconnstate = APCONN_ACTIVE;
+
+	spin_unlock_irqrestore(&bcs->aplock, flags);
+
+	while (ap->bcnext) {
+		/* this should never happen */
+		dev_warn(cs->dev, "%s: dropping extra application %u\n",
+			 __func__, ap->bcnext->id);
+		send_disconnect_ind(bcs, ap->bcnext,
+				    CapiCallGivenToOtherApplication);
+		ap->bcnext = ap->bcnext->bcnext;
+	}
+
 	capi_cmsg_header(&iif->hcmsg, ap->id, command, CAPI_IND,
 			 ap->nextMessageNumber++,
 			 iif->ctr.cnr | ((bcs->channel + 1) << 8) | (1 << 16));
@@ -858,7 +889,6 @@ void gigaset_isdn_connB(struct bc_state *bcs)
 	}
 	capi_cmsg2message(&iif->hcmsg, __skb_put(skb, msgsize));
 	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
-	ap->connected = APCONN_ACTIVE;
 	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
 }
 
@@ -964,6 +994,61 @@ static void gigaset_register_appl(struct capi_ctr *ctr, u16 appl,
 	ap->rp = *rp;
 
 	list_add(&ap->ctrlist, &iif->appls);
+	dev_info(cs->dev, "application %u registered\n", ap->id);
+}
+
+/*
+ * remove CAPI application from channel
+ * helper function to keep indentation levels down and stay in 80 columns
+ */
+
+static inline void remove_appl_from_channel(struct bc_state *bcs,
+					    struct gigaset_capi_appl *ap)
+{
+	struct cardstate *cs = bcs->cs;
+	struct gigaset_capi_appl *bcap;
+	unsigned long flags;
+	int prevconnstate;
+
+	spin_lock_irqsave(&bcs->aplock, flags);
+	bcap = bcs->ap;
+	if (bcap == NULL) {
+		spin_unlock_irqrestore(&bcs->aplock, flags);
+		return;
+	}
+
+	/* check first application on channel */
+	if (bcap == ap) {
+		bcs->ap = ap->bcnext;
+		if (bcs->ap != NULL) {
+			spin_unlock_irqrestore(&bcs->aplock, flags);
+			return;
+		}
+
+		/* none left, clear channel state */
+		prevconnstate = bcs->apconnstate;
+		bcs->apconnstate = APCONN_NONE;
+		spin_unlock_irqrestore(&bcs->aplock, flags);
+
+		if (prevconnstate == APCONN_ACTIVE) {
+			dev_notice(cs->dev, "%s: hanging up channel %u\n",
+				   __func__, bcs->channel);
+			gigaset_add_event(cs, &bcs->at_state,
+					  EV_HUP, NULL, 0, NULL);
+			gigaset_schedule_event(cs);
+		}
+		return;
+	}
+
+	/* check remaining list */
+	do {
+		if (bcap->bcnext == ap) {
+			bcap->bcnext = bcap->bcnext->bcnext;
+			return;
+		}
+		bcap = bcap->bcnext;
+	} while (bcap != NULL);
+	spin_unlock_irqrestore(&bcs->aplock, flags);
 }
 
 /*
@@ -975,19 +1060,19 @@ static void gigaset_release_appl(struct capi_ctr *ctr, u16 appl)
 		= container_of(ctr, struct gigaset_capi_ctr, ctr);
 	struct cardstate *cs = iif->ctr.driverdata;
 	struct gigaset_capi_appl *ap, *tmp;
+	unsigned ch;
 
 	list_for_each_entry_safe(ap, tmp, &iif->appls, ctrlist)
 		if (ap->id == appl) {
-			if (ap->connected != APCONN_NONE) {
-				dev_err(cs->dev,
-					"%s: application %u still connected\n",
-					__func__, ap->id);
-				/* ToDo: clear active connection */
-			}
+			/* remove from any channels */
+			for (ch = 0; ch < cs->channels; ch++)
+				remove_appl_from_channel(&cs->bcs[ch], ap);
+
+			/* remove from registration list */
 			list_del(&ap->ctrlist);
 			kfree(ap);
+			dev_info(cs->dev, "application %u released\n", appl);
 		}
-
 }
 
 /*
@@ -1166,6 +1251,7 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
 	char **commands;
 	char *s;
 	u8 *pp;
+	unsigned long flags;
 	int i, l, lbc, lhlc;
 	u16 info;
 
@@ -1181,8 +1267,15 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
 		send_conf(iif, ap, skb, CapiNoPlciAvailable);
 		return;
 	}
+	spin_lock_irqsave(&bcs->aplock, flags);
+	if (bcs->ap != NULL || bcs->apconnstate != APCONN_NONE)
+		dev_warn(cs->dev, "%s: channel not properly cleared (%p/%d)\n",
+			 __func__, bcs->ap, bcs->apconnstate);
 	ap->bcnext = NULL;
 	bcs->ap = ap;
+	bcs->apconnstate = APCONN_SETUP;
+	spin_unlock_irqrestore(&bcs->aplock, flags);
+
 	bcs->rx_bufsize = ap->rp.datablklen;
 	dev_kfree_skb(bcs->rx_skb);
 	gigaset_new_rx_skb(bcs);
@@ -1419,7 +1512,6 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
 		goto error;
 	}
 	gigaset_schedule_event(cs);
-	ap->connected = APCONN_SETUP;
 	send_conf(iif, ap, skb, CapiSuccess);
 	return;
 
@@ -1447,6 +1539,7 @@ static void do_connect_resp(struct gigaset_capi_ctr *iif,
 	_cmsg *cmsg = &iif->acmsg;
 	struct bc_state *bcs;
 	struct gigaset_capi_appl *oap;
+	unsigned long flags;
 	int channel;
 
 	/* decode message */
@@ -1466,12 +1559,21 @@ static void do_connect_resp(struct gigaset_capi_ctr *iif,
 	switch (cmsg->Reject) {
 	case 0:		/* Accept */
 		/* drop all competing applications, keep only this one */
-		for (oap = bcs->ap; oap != NULL; oap = oap->bcnext)
-			if (oap != ap)
+		spin_lock_irqsave(&bcs->aplock, flags);
+		while (bcs->ap != NULL) {
+			oap = bcs->ap;
+			bcs->ap = oap->bcnext;
+			if (oap != ap) {
+				spin_unlock_irqrestore(&bcs->aplock, flags);
 				send_disconnect_ind(bcs, oap,
 					CapiCallGivenToOtherApplication);
+				spin_lock_irqsave(&bcs->aplock, flags);
+			}
+		}
 		ap->bcnext = NULL;
 		bcs->ap = ap;
+		spin_unlock_irqrestore(&bcs->aplock, flags);
+
 		bcs->rx_bufsize = ap->rp.datablklen;
 		dev_kfree_skb(bcs->rx_skb);
 		gigaset_new_rx_skb(bcs);
@@ -1542,31 +1644,45 @@ static void do_connect_resp(struct gigaset_capi_ctr *iif,
 		send_disconnect_ind(bcs, ap, 0);
 
 		/* remove it from the list of listening apps */
+		spin_lock_irqsave(&bcs->aplock, flags);
 		if (bcs->ap == ap) {
 			bcs->ap = ap->bcnext;
-			if (bcs->ap == NULL)
+			if (bcs->ap == NULL) {
 				/* last one: stop ev-layer hupD notifications */
+				bcs->apconnstate = APCONN_NONE;
 				bcs->chstate &= ~CHS_NOTIFY_LL;
+			}
+			spin_unlock_irqrestore(&bcs->aplock, flags);
 			return;
 		}
 		for (oap = bcs->ap; oap != NULL; oap = oap->bcnext) {
 			if (oap->bcnext == ap) {
 				oap->bcnext = oap->bcnext->bcnext;
+				spin_unlock_irqrestore(&bcs->aplock, flags);
 				return;
 			}
 		}
+		spin_unlock_irqrestore(&bcs->aplock, flags);
 		dev_err(cs->dev, "%s: application %u not found\n",
 			__func__, ap->id);
 		return;
 
 	default:		/* Reject */
 		/* drop all competing applications, keep only this one */
-		for (oap = bcs->ap; oap != NULL; oap = oap->bcnext)
-			if (oap != ap)
+		spin_lock_irqsave(&bcs->aplock, flags);
+		while (bcs->ap != NULL) {
+			oap = bcs->ap;
+			bcs->ap = oap->bcnext;
+			if (oap != ap) {
+				spin_unlock_irqrestore(&bcs->aplock, flags);
 				send_disconnect_ind(bcs, oap,
 					CapiCallGivenToOtherApplication);
+				spin_lock_irqsave(&bcs->aplock, flags);
+			}
+		}
 		ap->bcnext = NULL;
 		bcs->ap = ap;
+		spin_unlock_irqrestore(&bcs->aplock, flags);
 
 		/* reject call - will trigger DISCONNECT_IND for this app */
 		dev_info(cs->dev, "%s: Reject=%x\n",
@@ -1589,6 +1705,7 @@ static void do_connect_b3_req(struct gigaset_capi_ctr *iif,
 {
 	struct cardstate *cs = iif->ctr.driverdata;
 	_cmsg *cmsg = &iif->acmsg;
+	struct bc_state *bcs;
 	int channel;
 
 	/* decode message */
@@ -1603,9 +1720,10 @@ static void do_connect_b3_req(struct gigaset_capi_ctr *iif,
 		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
 		return;
 	}
+	bcs = &cs->bcs[channel-1];
 
 	/* mark logical connection active */
-	ap->connected = APCONN_ACTIVE;
+	bcs->apconnstate = APCONN_ACTIVE;
 
 	/* build NCCI: always 1 (one B3 connection only) */
 	cmsg->adr.adrNCCI |= 1 << 16;
@@ -1651,7 +1769,7 @@ static void do_connect_b3_resp(struct gigaset_capi_ctr *iif,
 
 	if (cmsg->Reject) {
 		/* Reject: clear B3 connect received flag */
-		ap->connected = APCONN_SETUP;
+		bcs->apconnstate = APCONN_SETUP;
 
 		/* trigger hangup, causing eventual DISCONNECT_IND */
 		if (!gigaset_add_event(cs, &bcs->at_state,
@@ -1723,11 +1841,11 @@ static void do_disconnect_req(struct gigaset_capi_ctr *iif,
 	}
 
 	/* skip if DISCONNECT_IND already sent */
-	if (!ap->connected)
+	if (!bcs->apconnstate)
 		return;
 
 	/* check for active logical connection */
-	if (ap->connected >= APCONN_ACTIVE) {
+	if (bcs->apconnstate >= APCONN_ACTIVE) {
 		/*
 		 * emit DISCONNECT_B3_IND with cause 0x3301
 		 * use separate cmsg structure, as the content of iif->acmsg
@@ -1776,6 +1894,7 @@ static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif,
 {
 	struct cardstate *cs = iif->ctr.driverdata;
 	_cmsg *cmsg = &iif->acmsg;
+	struct bc_state *bcs;
 	int channel;
 
 	/* decode message */
@@ -1791,17 +1910,17 @@ static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif,
 		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
 		return;
 	}
+	bcs = &cs->bcs[channel-1];
 
 	/* reject if logical connection not active */
-	if (ap->connected < APCONN_ACTIVE) {
+	if (bcs->apconnstate < APCONN_ACTIVE) {
 		send_conf(iif, ap, skb,
 			  CapiMessageNotSupportedInCurrentState);
 		return;
 	}
 
 	/* trigger hangup, causing eventual DISCONNECT_B3_IND */
-	if (!gigaset_add_event(cs, &cs->bcs[channel-1].at_state,
-			       EV_HUP, NULL, 0, NULL)) {
+	if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) {
 		send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
 		return;
 	}
@@ -1822,6 +1941,7 @@ static void do_data_b3_req(struct gigaset_capi_ctr *iif,
 			   struct sk_buff *skb)
 {
 	struct cardstate *cs = iif->ctr.driverdata;
+	struct bc_state *bcs;
 	int channel = CAPIMSG_PLCI_PART(skb->data);
 	u16 ncci = CAPIMSG_NCCI_PART(skb->data);
 	u16 msglen = CAPIMSG_LEN(skb->data);
@@ -1844,6 +1964,7 @@ static void do_data_b3_req(struct gigaset_capi_ctr *iif,
 		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
 		return;
 	}
+	bcs = &cs->bcs[channel-1];
 	if (msglen != CAPI_DATA_B3_REQ_LEN && msglen != CAPI_DATA_B3_REQ_LEN64)
 		dev_notice(cs->dev, "%s: unexpected length %d\n",
 			   "DATA_B3_REQ", msglen);
@@ -1863,7 +1984,7 @@ static void do_data_b3_req(struct gigaset_capi_ctr *iif,
 	}
 
 	/* reject if logical connection not active */
-	if (ap->connected < APCONN_ACTIVE) {
+	if (bcs->apconnstate < APCONN_ACTIVE) {
 		send_conf(iif, ap, skb, CapiMessageNotSupportedInCurrentState);
 		return;
 	}
@@ -1874,7 +1995,7 @@ static void do_data_b3_req(struct gigaset_capi_ctr *iif,
 	skb_pull(skb, msglen);
 
 	/* pass to device-specific module */
-	if (cs->ops->send_skb(&cs->bcs[channel-1], skb) < 0) {
+	if (cs->ops->send_skb(bcs, skb) < 0) {
 		send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
 		return;
 	}
diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c
index 9778fabbc488..5d4befb81057 100644
--- a/drivers/isdn/gigaset/common.c
+++ b/drivers/isdn/gigaset/common.c
@@ -649,6 +649,10 @@ static struct bc_state *gigaset_initbcs(struct bc_state *bcs,
 	for (i = 0; i < AT_NUM; ++i)
 		bcs->commands[i] = NULL;
 
+	spin_lock_init(&bcs->aplock);
+	bcs->ap = NULL;
+	bcs->apconnstate = 0;
+
 	gig_dbg(DEBUG_INIT, "  setting up bcs[%d]->hw", channel);
 	if (cs->ops->initbcshw(bcs))
 		return bcs;
diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h
index c4e6c26897ea..8738b0821fc9 100644
--- a/drivers/isdn/gigaset/gigaset.h
+++ b/drivers/isdn/gigaset/gigaset.h
@@ -403,7 +403,9 @@ struct bc_state {
 		struct bas_bc_state *bas;	/* usb hardware driver (base) */
 	} hw;
 
-	void *ap;			/* LL application structure */
+	void *ap;			/* associated LL application */
+	int apconnstate;		/* LL application connection state */
+	spinlock_t aplock;
 };
 
 struct cardstate {
-- 
cgit v1.2.3


From cc413d9097dfc6237f37dcaf52346db1061a6119 Mon Sep 17 00:00:00 2001
From: Michal Schmidt <mschmidt@redhat.com>
Date: Thu, 24 Jun 2010 04:13:44 +0000
Subject: vxge: fix memory leak in vxge_alloc_msix() error path

When pci_enable_msix() returned ret<0, entries and vxge_entries were leaked.
While at it, use the centralized exit idiom in the function.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Ram Vepa <ram.vepa@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/vxge/vxge-main.c | 29 ++++++++++++++++++++---------
 1 file changed, 20 insertions(+), 9 deletions(-)

diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index b504bd561362..d14e207de1df 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -2262,7 +2262,8 @@ start:
 		vxge_debug_init(VXGE_ERR,
 			"%s: memory allocation failed",
 			VXGE_DRIVER_NAME);
-		return  -ENOMEM;
+		ret = -ENOMEM;
+		goto alloc_entries_failed;
 	}
 
 	vdev->vxge_entries =
@@ -2271,8 +2272,8 @@ start:
 	if (!vdev->vxge_entries) {
 		vxge_debug_init(VXGE_ERR, "%s: memory allocation failed",
 			VXGE_DRIVER_NAME);
-		kfree(vdev->entries);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto alloc_vxge_entries_failed;
 	}
 
 	for (i = 0, j = 0; i < vdev->no_of_vpath; i++) {
@@ -2303,22 +2304,32 @@ start:
 		vxge_debug_init(VXGE_ERR,
 			"%s: MSI-X enable failed for %d vectors, ret: %d",
 			VXGE_DRIVER_NAME, vdev->intr_cnt, ret);
+		if ((max_config_vpath != VXGE_USE_DEFAULT) || (ret < 3)) {
+			ret = -ENODEV;
+			goto enable_msix_failed;
+		}
+
 		kfree(vdev->entries);
 		kfree(vdev->vxge_entries);
 		vdev->entries = NULL;
 		vdev->vxge_entries = NULL;
-
-		if ((max_config_vpath != VXGE_USE_DEFAULT) || (ret < 3))
-			return -ENODEV;
 		/* Try with less no of vector by reducing no of vpaths count */
 		temp = (ret - 1)/2;
 		vxge_close_vpaths(vdev, temp);
 		vdev->no_of_vpath = temp;
 		goto start;
-	} else if (ret < 0)
-		return -ENODEV;
-
+	} else if (ret < 0) {
+		ret = -ENODEV;
+		goto enable_msix_failed;
+	}
 	return 0;
+
+enable_msix_failed:
+	kfree(vdev->vxge_entries);
+alloc_vxge_entries_failed:
+	kfree(vdev->entries);
+alloc_entries_failed:
+	return ret;
 }
 
 static int vxge_enable_msix(struct vxgedev *vdev)
-- 
cgit v1.2.3


From d41de3c10047d5f0b661593a8f4610a19f87621f Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Tue, 22 Jun 2010 01:41:36 +0000
Subject: ISDN: hysdn, fix potential NULL dereference

Stanse found that lp is dereferenced earlier than checked for being
NULL in hysdn_rx_netpkt. Move the initialization below the test.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/isdn/hysdn/hysdn_net.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/isdn/hysdn/hysdn_net.c b/drivers/isdn/hysdn/hysdn_net.c
index 72eb92647c1b..feec8d89d719 100644
--- a/drivers/isdn/hysdn/hysdn_net.c
+++ b/drivers/isdn/hysdn/hysdn_net.c
@@ -187,12 +187,13 @@ void
 hysdn_rx_netpkt(hysdn_card * card, unsigned char *buf, unsigned short len)
 {
 	struct net_local *lp = card->netif;
-	struct net_device *dev = lp->dev;
+	struct net_device *dev;
 	struct sk_buff *skb;
 
 	if (!lp)
 		return;		/* non existing device */
 
+	dev = lp->dev;
 	dev->stats.rx_bytes += len;
 
 	skb = dev_alloc_skb(len);
-- 
cgit v1.2.3


From e2f5b04563786d4b7d7648868de7e941a0649372 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Tue, 22 Jun 2010 02:38:13 +0000
Subject: phylib: Add autoload support for the LXT973 phy.

Commit e13647c1 (phylib: Add support for the LXT973 phy.) added a new ID
but neglected to also add it to the MODULE_DEVICE_TABLE.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/lxt.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
index dbd003453737..29c39ff85de5 100644
--- a/drivers/net/phy/lxt.c
+++ b/drivers/net/phy/lxt.c
@@ -226,6 +226,7 @@ module_exit(lxt_exit);
 static struct mdio_device_id lxt_tbl[] = {
 	{ 0x78100000, 0xfffffff0 },
 	{ 0x001378e0, 0xfffffff0 },
+	{ 0x00137a10, 0xfffffff0 },
 	{ }
 };
 
-- 
cgit v1.2.3


From 4303ef19c6e6d16ea845c04b02b9cf086bcb8ed7 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Fri, 11 Jun 2010 17:30:05 +0100
Subject: KEYS: Propagate error code instead of returning -EINVAL

This is from a Smatch check I'm writing.

strncpy_from_user() returns -EFAULT on error so the first change just
silences a warning but doesn't change how the code works.

The other change is a bug fix because install_thread_keyring_to_cred()
can return a variety of errors such as -EINVAL, -EEXIST, -ENOMEM or
-EKEYREVOKED.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 security/keys/keyctl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 13074b454743..6261745e4459 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -33,7 +33,7 @@ static int key_get_type_from_user(char *type,
 	ret = strncpy_from_user(type, _type, len);
 
 	if (ret < 0)
-		return -EFAULT;
+		return ret;
 
 	if (ret == 0 || ret >= len)
 		return -EINVAL;
@@ -1080,7 +1080,7 @@ set:
 	return old_setting;
 error:
 	abort_creds(new);
-	return -EINVAL;
+	return ret;
 
 } /* end keyctl_set_reqkey_keyring() */
 
-- 
cgit v1.2.3


From 4ef09889d7b4c7be2aa3e132efb77029f51c95b7 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 30 Mar 2010 02:52:33 +0900
Subject: v4l-dvb: update gfp/slab.h includes

Implicit slab.h inclusion via percpu.h is about to go away.  Make sure
gfp.h or slab.h is included as necessary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 drivers/staging/tm6000/tm6000-alsa.c  | 1 +
 drivers/staging/tm6000/tm6000-cards.c | 1 +
 drivers/staging/tm6000/tm6000-core.c  | 1 +
 drivers/staging/tm6000/tm6000-dvb.c   | 1 +
 4 files changed, 4 insertions(+)

diff --git a/drivers/staging/tm6000/tm6000-alsa.c b/drivers/staging/tm6000/tm6000-alsa.c
index ce081cd44ad4..273e26ede650 100644
--- a/drivers/staging/tm6000/tm6000-alsa.c
+++ b/drivers/staging/tm6000/tm6000-alsa.c
@@ -15,6 +15,7 @@
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
+#include <linux/slab.h>
 
 #include <asm/delay.h>
 #include <sound/core.h>
diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c
index cedd9044022f..6a9ae40c7c6d 100644
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -24,6 +24,7 @@
 #include <linux/i2c.h>
 #include <linux/usb.h>
 #include <linux/version.h>
+#include <linux/slab.h>
 #include <media/v4l2-common.h>
 #include <media/tuner.h>
 #include <media/tvaudio.h>
diff --git a/drivers/staging/tm6000/tm6000-core.c b/drivers/staging/tm6000/tm6000-core.c
index 27f3f551b545..c3690e3580da 100644
--- a/drivers/staging/tm6000/tm6000-core.c
+++ b/drivers/staging/tm6000/tm6000-core.c
@@ -22,6 +22,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/i2c.h>
 #include "tm6000.h"
diff --git a/drivers/staging/tm6000/tm6000-dvb.c b/drivers/staging/tm6000/tm6000-dvb.c
index 261e66acbe46..86c1c8b5f25a 100644
--- a/drivers/staging/tm6000/tm6000-dvb.c
+++ b/drivers/staging/tm6000/tm6000-dvb.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/usb.h>
 
 #include "tm6000.h"
-- 
cgit v1.2.3


From 68aaae9e95199d2bc46a9e8e3670e403b4a3fe75 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 30 Mar 2010 02:52:45 +0900
Subject: arm: update gfp/slab.h includes

Implicit slab.h inclusion via percpu.h is about to go away.  Make sure
gfp.h or slab.h is included as necessary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 arch/arm/mach-vexpress/ct-ca9x4.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index e6f73030d5f0..9b11eedba65f 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -2,6 +2,7 @@
  * Versatile Express Core Tile Cortex A9x4 Support
  */
 #include <linux/init.h>
+#include <linux/gfp.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
-- 
cgit v1.2.3


From f244f31a0d31402c2c1b1950108e0013353cc3f3 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 30 Mar 2010 02:52:36 +0900
Subject: davinci: update gfp/slab.h includes

Implicit slab.h inclusion via percpu.h is about to go away.  Make sure
gfp.h or slab.h is included as necessary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 drivers/rtc/rtc-davinci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/rtc/rtc-davinci.c b/drivers/rtc/rtc-davinci.c
index 92a8f6cacda9..34647fc1ee98 100644
--- a/drivers/rtc/rtc-davinci.c
+++ b/drivers/rtc/rtc-davinci.c
@@ -29,6 +29,7 @@
 #include <linux/bcd.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 /*
  * The DaVinci RTC is a simple RTC with the following
-- 
cgit v1.2.3


From 327f935a9ef644c0ec3d050c94bce753756d60c0 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 30 Mar 2010 02:52:32 +0900
Subject: ocfs2: update gfp/slab.h includes

Implicit slab.h inclusion via percpu.h is about to go away.  Make sure
gfp.h or slab.h is included as necessary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 fs/ocfs2/reservations.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/ocfs2/reservations.c b/fs/ocfs2/reservations.c
index 40650021fc24..d8b6e4259b80 100644
--- a/fs/ocfs2/reservations.c
+++ b/fs/ocfs2/reservations.c
@@ -26,7 +26,6 @@
 
 #include <linux/fs.h>
 #include <linux/types.h>
-#include <linux/slab.h>
 #include <linux/highmem.h>
 #include <linux/bitops.h>
 #include <linux/list.h>
-- 
cgit v1.2.3


From e0fb8c418520b41d57667befdb8861c46cdf69e0 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 30 Mar 2010 02:52:44 +0900
Subject: acpi: update gfp/slab.h includes

Implicit slab.h inclusion via percpu.h is about to go away.  Make sure
gfp.h or slab.h is included as necessary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 drivers/acpi/apei/apei-base.c | 1 +
 drivers/acpi/atomicio.c       | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c
index db3946e9c66b..216e1e948ff6 100644
--- a/drivers/acpi/apei/apei-base.c
+++ b/drivers/acpi/apei/apei-base.c
@@ -34,6 +34,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
+#include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/kref.h>
 #include <linux/rculist.h>
diff --git a/drivers/acpi/atomicio.c b/drivers/acpi/atomicio.c
index 814b19249616..8f8bd736d4ff 100644
--- a/drivers/acpi/atomicio.c
+++ b/drivers/acpi/atomicio.c
@@ -31,6 +31,7 @@
 #include <linux/kref.h>
 #include <linux/rculist.h>
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include <acpi/atomicio.h>
 
 #define ACPI_PFX "ACPI: "
-- 
cgit v1.2.3