From f0dcb5bd56ee7cf7fcca123d5df51b201d1c9e9b Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Thu, 16 Dec 2021 12:16:29 +0100 Subject: dt-bindings: mtd: nand-controller: Harmonize the property types Harmonize the different properties in this file by: * dropping the non-necessary allOf's * always defining the keywords in the following order: - first the "description" (when relevant), - then the "type"/"$ref" and the other generic keywords ("enum", "default", etc). Signed-off-by: Miquel Raynal Reviewed-by: Rob Herring Link: https://lore.kernel.org/linux-mtd/20211216111654.238086-4-miquel.raynal@bootlin.com --- .../devicetree/bindings/mtd/nand-controller.yaml | 26 ++++++++++------------ 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml index 5cd144a9ec99..a4fa65e872a5 100644 --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml @@ -39,8 +39,6 @@ properties: ranges: true cs-gpios: - minItems: 1 - maxItems: 8 description: Array of chip-select available to the controller. The first entries are a 1:1 mapping of the available chip-select on the @@ -48,6 +46,8 @@ properties: chip-select as needed may follow and should be phandles of GPIO lines. 'reg' entries of the NAND chip subnodes become indexes of this array when this property is present. + minItems: 1 + maxItems: 8 patternProperties: "^nand@[a-f0-9]$": @@ -58,8 +58,6 @@ patternProperties: Contains the chip-select IDs. nand-ecc-engine: - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle description: | A phandle on the hardware ECC engine if any. There are basically three possibilities: @@ -69,24 +67,24 @@ patternProperties: case the phandle should reference the node itself. 3/ The ECC engine is external, in this case the phandle should reference the specific ECC engine node. + $ref: /schemas/types.yaml#/definitions/phandle nand-use-soft-ecc-engine: - type: boolean description: Use a software ECC engine. + type: boolean nand-no-ecc-engine: - type: boolean description: Do not use any ECC correction. + type: boolean nand-ecc-placement: - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - enum: [ oob, interleaved ] description: Location of the ECC bytes. This location is unknown by default but can be explicitly set to "oob", if all ECC bytes are known to be stored in the OOB area, or "interleaved" if ECC bytes will be interleaved with regular data in the main area. + $ref: /schemas/types.yaml#/definitions/string + enum: [ oob, interleaved ] nand-ecc-algo: description: @@ -102,7 +100,6 @@ patternProperties: default: 8 nand-on-flash-bbt: - $ref: /schemas/types.yaml#/definitions/flag description: With this property, the OS will search the device for a Bad Block Table (BBT). If not found, it will create one, reserve @@ -111,6 +108,7 @@ patternProperties: few pages of all the blocks will be scanned at boot time to find Bad Block Markers (BBM). These markers will help to build a volatile BBT in RAM. + $ref: /schemas/types.yaml#/definitions/flag nand-ecc-strength: description: @@ -125,7 +123,6 @@ patternProperties: minimum: 1 nand-ecc-maximize: - $ref: /schemas/types.yaml#/definitions/flag description: Whether or not the ECC strength should be maximized. The maximum ECC strength is both controller and chip @@ -134,18 +131,19 @@ patternProperties: constraint into account. This is particularly useful when only the in-band area is used by the upper layers, and you want to make your NAND as reliable as possible. + $ref: /schemas/types.yaml#/definitions/flag nand-is-boot-medium: - $ref: /schemas/types.yaml#/definitions/flag description: Whether or not the NAND chip is a boot medium. Drivers might use this information to select ECC algorithms supported by the boot ROM or similar restrictions. + $ref: /schemas/types.yaml#/definitions/flag nand-rb: - $ref: /schemas/types.yaml#/definitions/uint32-array description: Contains the native Ready/Busy IDs. + $ref: /schemas/types.yaml#/definitions/uint32-array rb-gpios: description: @@ -155,11 +153,11 @@ patternProperties: should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted. secure-regions: - $ref: /schemas/types.yaml#/definitions/uint64-matrix description: Regions in the NAND chip which are protected using a secure element like Trustzone. This property contains the start address and size of the secure regions present. + $ref: /schemas/types.yaml#/definitions/uint64-matrix required: - reg -- cgit v1.2.3