From eeed018cbfa30c0bde89075b06b62fc198afb51c Mon Sep 17 00:00:00 2001 From: Michal Kalderon Date: Sun, 17 Aug 2014 16:47:44 +0300 Subject: bnx2x: Add timestamping and PTP hardware clock support This adds a PHC to the bnx2x driver. Driver supports timestamping send/receive PTP packets, as well as adjusting the on-chip clock. The driver has been tested with linuxptp project. Signed-off-by: Michal Kalderon Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 27 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 25 +- .../net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 42 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h | 47 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 599 ++++++++++++++++++++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 178 +++++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 50 ++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h | 29 +- 8 files changed, 984 insertions(+), 13 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index d777fae86988..a0b06a07cbde 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -20,6 +20,10 @@ #include #include +#include +#include +#include + /* compilation time flags */ /* define this to make the driver freeze on error to allow getting debug info @@ -70,6 +74,7 @@ enum bnx2x_int_mode { #define BNX2X_MSG_SP 0x0100000 /* was: NETIF_MSG_INTR */ #define BNX2X_MSG_FP 0x0200000 /* was: NETIF_MSG_INTR */ #define BNX2X_MSG_IOV 0x0800000 +#define BNX2X_MSG_PTP 0x1000000 #define BNX2X_MSG_IDLE 0x2000000 /* used for idle check*/ #define BNX2X_MSG_ETHTOOL 0x4000000 #define BNX2X_MSG_DCB 0x8000000 @@ -1591,6 +1596,8 @@ struct bnx2x { #define BC_SUPPORTS_RMMOD_CMD (1 << 24) #define HAS_PHYS_PORT_ID (1 << 25) #define AER_ENABLED (1 << 26) +#define PTP_SUPPORTED (1 << 27) +#define TX_TIMESTAMPING_EN (1 << 28) #define BP_NOMCP(bp) ((bp)->flags & NO_MCP_FLAG) @@ -1933,6 +1940,19 @@ struct bnx2x { u8 phys_port_id[ETH_ALEN]; + /* PTP related context */ + struct ptp_clock *ptp_clock; + struct ptp_clock_info ptp_clock_info; + struct work_struct ptp_task; + struct cyclecounter cyclecounter; + struct timecounter timecounter; + bool timecounter_init_done; + struct sk_buff *ptp_tx_skb; + unsigned long ptp_tx_start; + bool hwtstamp_ioctl_called; + u16 tx_type; + u16 rx_filter; + struct bnx2x_link_report_data vf_link_vars; }; @@ -2559,4 +2579,11 @@ void bnx2x_update_mng_version(struct bnx2x *bp); #define E1H_MAX_MF_SB_COUNT (HC_SB_MAX_SB_E1X/(E1HVN_MAX * PORT_MAX)) +void bnx2x_init_ptp(struct bnx2x *bp); +int bnx2x_configure_ptp_filters(struct bnx2x *bp); +void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb); + +#define BNX2X_MAX_PHC_DRIFT 31000000 +#define BNX2X_PTP_TX_TIMEOUT + #endif /* bnx2x.h */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index e35326cfd2c9..a1dd2e417a97 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -1067,6 +1067,11 @@ reuse_rx: skb_record_rx_queue(skb, fp->rx_queue); + /* Check if this packet was timestamped */ + if (unlikely(le16_to_cpu(cqe->fast_path_cqe.type_error_flags) & + (1 << ETH_FAST_PATH_RX_CQE_PTP_PKT_SHIFT))) + bnx2x_set_rx_ts(bp, skb); + if (le16_to_cpu(cqe_fp->pars_flags.flags) & PARSING_FLAGS_VLAN) __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), @@ -2808,7 +2813,11 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) /* Initialize Rx filter. */ bnx2x_set_rx_mode_inner(bp); - /* Start the Tx */ + if (bp->flags & PTP_SUPPORTED) { + bnx2x_init_ptp(bp); + bnx2x_configure_ptp_filters(bp); + } + /* Start Tx */ switch (load_mode) { case LOAD_NORMAL: /* Tx queue should be only re-enabled */ @@ -3833,6 +3842,20 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD; + if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) { + if (!(bp->flags & TX_TIMESTAMPING_EN)) { + BNX2X_ERR("Tx timestamping was not enabled, this packet will not be timestamped\n"); + } else if (bp->ptp_tx_skb) { + BNX2X_ERR("The device supports only a single outstanding packet to timestamp, this packet will not be timestamped\n"); + } else { + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + /* schedule check for Tx timestamp */ + bp->ptp_tx_skb = skb_get(skb); + bp->ptp_tx_start = jiffies; + schedule_work(&bp->ptp_task); + } + } + /* header nbd: indirectly zero other flags! */ tx_start_bd->general_data = 1 << ETH_TX_START_BD_HDR_NBDS_SHIFT; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index 92fee842f954..0b173ed20ae9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -3481,6 +3481,46 @@ static int bnx2x_set_channels(struct net_device *dev, return bnx2x_nic_load(bp, LOAD_NORMAL); } +static int bnx2x_get_ts_info(struct net_device *dev, + struct ethtool_ts_info *info) +{ + struct bnx2x *bp = netdev_priv(dev); + + if (bp->flags & PTP_SUPPORTED) { + info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE | + SOF_TIMESTAMPING_TX_HARDWARE | + SOF_TIMESTAMPING_RX_HARDWARE | + SOF_TIMESTAMPING_RAW_HARDWARE; + + if (bp->ptp_clock) + info->phc_index = ptp_clock_index(bp->ptp_clock); + else + info->phc_index = -1; + + info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) | + (1 << HWTSTAMP_FILTER_PTP_V1_L4_EVENT) | + (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_EVENT) | + (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ); + + info->tx_types = (1 << HWTSTAMP_TX_OFF)|(1 << HWTSTAMP_TX_ON); + + return 0; + } + + return ethtool_op_get_ts_info(dev, info); +} + static const struct ethtool_ops bnx2x_ethtool_ops = { .get_settings = bnx2x_get_settings, .set_settings = bnx2x_set_settings, @@ -3522,7 +3562,7 @@ static const struct ethtool_ops bnx2x_ethtool_ops = { .get_module_eeprom = bnx2x_get_module_eeprom, .get_eee = bnx2x_get_eee, .set_eee = bnx2x_set_eee, - .get_ts_info = ethtool_op_get_ts_info, + .get_ts_info = bnx2x_get_ts_info, }; static const struct ethtool_ops bnx2x_vf_ethtool_ops = { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h index 3b6cbd2deafb..7ea04537ecbf 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h @@ -3547,7 +3547,9 @@ struct client_init_rx_data { __le16 rx_cos_mask; __le16 silent_vlan_value; __le16 silent_vlan_mask; - __le32 reserved6[2]; + u8 handle_ptp_pkts_flg; + u8 reserved6[3]; + __le32 reserved7; }; /* @@ -3616,7 +3618,9 @@ struct client_update_ramrod_data { u8 refuse_outband_vlan_change_flg; u8 tx_switching_flg; u8 tx_switching_change_flg; - __le32 reserved1; + u8 handle_ptp_pkts_flg; + u8 handle_ptp_pkts_change_flg; + __le16 reserved1; __le32 echo; }; @@ -3850,8 +3854,10 @@ struct eth_fast_path_rx_cqe { #define ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG_SHIFT 4 #define ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG (0x1<<5) #define ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG_SHIFT 5 -#define ETH_FAST_PATH_RX_CQE_RESERVED0 (0x3<<6) -#define ETH_FAST_PATH_RX_CQE_RESERVED0_SHIFT 6 +#define ETH_FAST_PATH_RX_CQE_PTP_PKT (0x1<<6) +#define ETH_FAST_PATH_RX_CQE_PTP_PKT_SHIFT 6 +#define ETH_FAST_PATH_RX_CQE_RESERVED0 (0x1<<7) +#define ETH_FAST_PATH_RX_CQE_RESERVED0_SHIFT 7 u8 status_flags; #define ETH_FAST_PATH_RX_CQE_RSS_HASH_TYPE (0x7<<0) #define ETH_FAST_PATH_RX_CQE_RSS_HASH_TYPE_SHIFT 0 @@ -5658,6 +5664,16 @@ struct protocol_common_spe { union protocol_common_specific_data data; }; +/* The data for the Set Timesync Ramrod */ +struct set_timesync_ramrod_data { + u8 drift_adjust_cmd; + u8 offset_cmd; + u8 add_sub_drift_adjust_value; + u8 drift_adjust_value; + u32 drift_adjust_period; + struct regpair offset_delta; +}; + /* * The send queue element */ @@ -5780,6 +5796,29 @@ struct tstorm_vf_zone_data { struct regpair reserved; }; +/* Add or Subtract Value for Set Timesync Ramrod */ +enum ts_add_sub_value { + TS_SUB_VALUE, + TS_ADD_VALUE, + MAX_TS_ADD_SUB_VALUE +}; + +/* Drift-Adjust Commands for Set Timesync Ramrod */ +enum ts_drift_adjust_cmd { + TS_DRIFT_ADJUST_KEEP, + TS_DRIFT_ADJUST_SET, + TS_DRIFT_ADJUST_RESET, + MAX_TS_DRIFT_ADJUST_CMD +}; + +/* Offset Commands for Set Timesync Ramrod */ +enum ts_offset_cmd { + TS_OFFSET_KEEP, + TS_OFFSET_INC, + TS_OFFSET_DEC, + MAX_TS_OFFSET_CMD +}; + /* Tunnel Mode */ enum tunnel_mode { TUNN_MODE_NONE, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index a154c7e1550c..566674cc69bc 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -63,7 +63,6 @@ #include "bnx2x_vfpf.h" #include "bnx2x_dcb.h" #include "bnx2x_sp.h" - #include #include "bnx2x_fw_file_hdr.h" /* FW files */ @@ -290,6 +289,8 @@ static int bnx2x_set_storm_rx_mode(struct bnx2x *bp); * General service functions ****************************************************************************/ +static int bnx2x_hwtstamp_ioctl(struct bnx2x *bp, struct ifreq *ifr); + static void __storm_memset_dma_mapping(struct bnx2x *bp, u32 addr, dma_addr_t mapping) { @@ -523,6 +524,7 @@ int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, * as long as this code is called both from syscall context and * from ndo_set_rx_mode() flow that may be called from BH. */ + spin_lock_bh(&bp->dmae_lock); /* reset completion */ @@ -551,7 +553,9 @@ int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, } unlock: + spin_unlock_bh(&bp->dmae_lock); + return rc; } @@ -5452,6 +5456,14 @@ static void bnx2x_eq_int(struct bnx2x *bp) break; goto next_spqe; + + case EVENT_RING_OPCODE_SET_TIMESYNC: + DP(BNX2X_MSG_SP | BNX2X_MSG_PTP, + "got set_timesync ramrod completion\n"); + if (f_obj->complete_cmd(bp, f_obj, + BNX2X_F_CMD_SET_TIMESYNC)) + break; + goto next_spqe; } switch (opcode | bp->state) { @@ -9033,6 +9045,48 @@ static int bnx2x_func_wait_started(struct bnx2x *bp) return 0; } +static void bnx2x_disable_ptp(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + + /* Disable sending PTP packets to host */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST : + NIG_REG_P0_LLH_PTP_TO_HOST, 0x0); + + /* Reset PTP event detection rules */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7FF); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFF); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK : + NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x7FF); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK : + NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3FFF); + + /* Disable the PTP feature */ + REG_WR(bp, port ? NIG_REG_P1_PTP_EN : + NIG_REG_P0_PTP_EN, 0x0); +} + +/* Called during unload, to stop PTP-related stuff */ +void bnx2x_stop_ptp(struct bnx2x *bp) +{ + /* Cancel PTP work queue. Should be done after the Tx queues are + * drained to prevent additional scheduling. + */ + cancel_work_sync(&bp->ptp_task); + + if (bp->ptp_tx_skb) { + dev_kfree_skb_any(bp->ptp_tx_skb); + bp->ptp_tx_skb = NULL; + } + + /* Disable PTP in HW */ + bnx2x_disable_ptp(bp); + + DP(BNX2X_MSG_PTP, "PTP stop ended successfully\n"); +} + void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link) { int port = BP_PORT(bp); @@ -9151,6 +9205,13 @@ unload_error: #endif } + /* stop_ptp should be after the Tx queues are drained to prevent + * scheduling to the cancelled PTP work queue. It should also be after + * function stop ramrod is sent, since as part of this ramrod FW access + * PTP registers. + */ + bnx2x_stop_ptp(bp); + /* Disable HW interrupts, NAPI */ bnx2x_netif_stop(bp, 1); /* Delete all NAPI objects */ @@ -12023,6 +12084,9 @@ static int bnx2x_init_bp(struct bnx2x *bp) bp->dump_preset_idx = 1; + if (CHIP_IS_E3B0(bp)) + bp->flags |= PTP_SUPPORTED; + return rc; } @@ -12355,13 +12419,17 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) struct bnx2x *bp = netdev_priv(dev); struct mii_ioctl_data *mdio = if_mii(ifr); - DP(NETIF_MSG_LINK, "ioctl: phy id 0x%x, reg 0x%x, val_in 0x%x\n", - mdio->phy_id, mdio->reg_num, mdio->val_in); - if (!netif_running(dev)) return -EAGAIN; - return mdio_mii_ioctl(&bp->mdio, mdio, cmd); + switch (cmd) { + case SIOCSHWTSTAMP: + return bnx2x_hwtstamp_ioctl(bp, ifr); + default: + DP(NETIF_MSG_LINK, "ioctl: phy id 0x%x, reg 0x%x, val_in 0x%x\n", + mdio->phy_id, mdio->reg_num, mdio->val_in); + return mdio_mii_ioctl(&bp->mdio, mdio, cmd); + } } #ifdef CONFIG_NET_POLL_CONTROLLER @@ -13005,6 +13073,191 @@ static int set_is_vf(int chip_id) } } +/* nig_tsgen registers relative address */ +#define tsgen_ctrl 0x0 +#define tsgen_freecount 0x10 +#define tsgen_synctime_t0 0x20 +#define tsgen_offset_t0 0x28 +#define tsgen_drift_t0 0x30 +#define tsgen_synctime_t1 0x58 +#define tsgen_offset_t1 0x60 +#define tsgen_drift_t1 0x68 + +/* FW workaround for setting drift */ +static int bnx2x_send_update_drift_ramrod(struct bnx2x *bp, int drift_dir, + int best_val, int best_period) +{ + struct bnx2x_func_state_params func_params = {NULL}; + struct bnx2x_func_set_timesync_params *set_timesync_params = + &func_params.params.set_timesync; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_SET_TIMESYNC; + + /* Function parameters */ + set_timesync_params->drift_adjust_cmd = TS_DRIFT_ADJUST_SET; + set_timesync_params->offset_cmd = TS_OFFSET_KEEP; + set_timesync_params->add_sub_drift_adjust_value = + drift_dir ? TS_ADD_VALUE : TS_SUB_VALUE; + set_timesync_params->drift_adjust_value = best_val; + set_timesync_params->drift_adjust_period = best_period; + + return bnx2x_func_state_change(bp, &func_params); +} + +static int bnx2x_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb) +{ + struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); + int rc; + int drift_dir = 1; + int val, period, period1, period2, dif, dif1, dif2; + int best_dif = BNX2X_MAX_PHC_DRIFT, best_period = 0, best_val = 0; + + DP(BNX2X_MSG_PTP, "PTP adjfreq called, ppb = %d\n", ppb); + + if (!netif_running(bp->dev)) { + DP(BNX2X_MSG_PTP, + "PTP adjfreq called while the interface is down\n"); + return -EFAULT; + } + + if (ppb < 0) { + ppb = -ppb; + drift_dir = 0; + } + + if (ppb == 0) { + best_val = 1; + best_period = 0x1FFFFFF; + } else if (ppb >= BNX2X_MAX_PHC_DRIFT) { + best_val = 31; + best_period = 1; + } else { + /* Changed not to allow val = 8, 16, 24 as these values + * are not supported in workaround. + */ + for (val = 0; val <= 31; val++) { + if ((val & 0x7) == 0) + continue; + period1 = val * 1000000 / ppb; + period2 = period1 + 1; + if (period1 != 0) + dif1 = ppb - (val * 1000000 / period1); + else + dif1 = BNX2X_MAX_PHC_DRIFT; + if (dif1 < 0) + dif1 = -dif1; + dif2 = ppb - (val * 1000000 / period2); + if (dif2 < 0) + dif2 = -dif2; + dif = (dif1 < dif2) ? dif1 : dif2; + period = (dif1 < dif2) ? period1 : period2; + if (dif < best_dif) { + best_dif = dif; + best_val = val; + best_period = period; + } + } + } + + rc = bnx2x_send_update_drift_ramrod(bp, drift_dir, best_val, + best_period); + if (rc) { + BNX2X_ERR("Failed to set drift\n"); + return -EFAULT; + } + + DP(BNX2X_MSG_PTP, "Configrued val = %d, period = %d\n", best_val, + best_period); + + return 0; +} + +static int bnx2x_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) +{ + struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); + u64 now; + + DP(BNX2X_MSG_PTP, "PTP adjtime called, delta = %llx\n", delta); + + now = timecounter_read(&bp->timecounter); + now += delta; + /* Re-init the timecounter */ + timecounter_init(&bp->timecounter, &bp->cyclecounter, now); + + return 0; +} + +static int bnx2x_ptp_gettime(struct ptp_clock_info *ptp, struct timespec *ts) +{ + struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); + u64 ns; + u32 remainder; + + ns = timecounter_read(&bp->timecounter); + + DP(BNX2X_MSG_PTP, "PTP gettime called, ns = %llu\n", ns); + + ts->tv_sec = div_u64_rem(ns, 1000000000ULL, &remainder); + ts->tv_nsec = remainder; + + return 0; +} + +static int bnx2x_ptp_settime(struct ptp_clock_info *ptp, + const struct timespec *ts) +{ + struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); + u64 ns; + + ns = ts->tv_sec * 1000000000ULL; + ns += ts->tv_nsec; + + DP(BNX2X_MSG_PTP, "PTP settime called, ns = %llu\n", ns); + + /* Re-init the timecounter */ + timecounter_init(&bp->timecounter, &bp->cyclecounter, ns); + + return 0; +} + +/* Enable (or disable) ancillary features of the phc subsystem */ +static int bnx2x_ptp_enable(struct ptp_clock_info *ptp, + struct ptp_clock_request *rq, int on) +{ + struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); + + BNX2X_ERR("PHC ancillary features are not supported\n"); + return -ENOTSUPP; +} + +void bnx2x_register_phc(struct bnx2x *bp) +{ + /* Fill the ptp_clock_info struct and register PTP clock*/ + bp->ptp_clock_info.owner = THIS_MODULE; + snprintf(bp->ptp_clock_info.name, 16, "%s", bp->dev->name); + bp->ptp_clock_info.max_adj = BNX2X_MAX_PHC_DRIFT; /* In PPB */ + bp->ptp_clock_info.n_alarm = 0; + bp->ptp_clock_info.n_ext_ts = 0; + bp->ptp_clock_info.n_per_out = 0; + bp->ptp_clock_info.pps = 0; + bp->ptp_clock_info.adjfreq = bnx2x_ptp_adjfreq; + bp->ptp_clock_info.adjtime = bnx2x_ptp_adjtime; + bp->ptp_clock_info.gettime = bnx2x_ptp_gettime; + bp->ptp_clock_info.settime = bnx2x_ptp_settime; + bp->ptp_clock_info.enable = bnx2x_ptp_enable; + + bp->ptp_clock = ptp_clock_register(&bp->ptp_clock_info, &bp->pdev->dev); + if (IS_ERR(bp->ptp_clock)) { + bp->ptp_clock = NULL; + BNX2X_ERR("PTP clock registeration failed\n"); + } +} + static int bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -13176,6 +13429,8 @@ static int bnx2x_init_one(struct pci_dev *pdev, "Unknown", dev->base_addr, bp->pdev->irq, dev->dev_addr); + bnx2x_register_phc(bp); + return 0; init_one_exit: @@ -13202,6 +13457,11 @@ static void __bnx2x_remove(struct pci_dev *pdev, struct bnx2x *bp, bool remove_netdev) { + if (bp->ptp_clock) { + ptp_clock_unregister(bp->ptp_clock); + bp->ptp_clock = NULL; + } + /* Delete storage MAC address */ if (!NO_FCOE(bp)) { rtnl_lock(); @@ -14177,3 +14437,332 @@ int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val) REG_RD(bp, pretend_reg); return 0; } + +static void bnx2x_ptp_task(struct work_struct *work) +{ + struct bnx2x *bp = container_of(work, struct bnx2x, ptp_task); + int port = BP_PORT(bp); + u32 val_seq; + u64 timestamp, ns; + struct skb_shared_hwtstamps shhwtstamps; + + /* Read Tx timestamp registers */ + val_seq = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID : + NIG_REG_P0_TLLH_PTP_BUF_SEQID); + if (val_seq & 0x10000) { + /* There is a valid timestamp value */ + timestamp = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_MSB : + NIG_REG_P0_TLLH_PTP_BUF_TS_MSB); + timestamp <<= 32; + timestamp |= REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_LSB : + NIG_REG_P0_TLLH_PTP_BUF_TS_LSB); + /* Reset timestamp register to allow new timestamp */ + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID : + NIG_REG_P0_TLLH_PTP_BUF_SEQID, 0x10000); + ns = timecounter_cyc2time(&bp->timecounter, timestamp); + + memset(&shhwtstamps, 0, sizeof(shhwtstamps)); + shhwtstamps.hwtstamp = ns_to_ktime(ns); + skb_tstamp_tx(bp->ptp_tx_skb, &shhwtstamps); + dev_kfree_skb_any(bp->ptp_tx_skb); + bp->ptp_tx_skb = NULL; + + DP(BNX2X_MSG_PTP, "Tx timestamp, timestamp cycles = %llu, ns = %llu\n", + timestamp, ns); + } else { + DP(BNX2X_MSG_PTP, "There is no valid Tx timestamp yet\n"); + /* Reschedule to keep checking for a valid timestamp value */ + schedule_work(&bp->ptp_task); + } +} + +void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb) +{ + int port = BP_PORT(bp); + u64 timestamp, ns; + + timestamp = REG_RD(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_TS_MSB : + NIG_REG_P0_LLH_PTP_HOST_BUF_TS_MSB); + timestamp <<= 32; + timestamp |= REG_RD(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_TS_LSB : + NIG_REG_P0_LLH_PTP_HOST_BUF_TS_LSB); + + /* Reset timestamp register to allow new timestamp */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID : + NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID, 0x10000); + + ns = timecounter_cyc2time(&bp->timecounter, timestamp); + + skb_hwtstamps(skb)->hwtstamp = ns_to_ktime(ns); + + DP(BNX2X_MSG_PTP, "Rx timestamp, timestamp cycles = %llu, ns = %llu\n", + timestamp, ns); +} + +/* Read the PHC */ +static cycle_t bnx2x_cyclecounter_read(const struct cyclecounter *cc) +{ + struct bnx2x *bp = container_of(cc, struct bnx2x, cyclecounter); + int port = BP_PORT(bp); + u32 wb_data[2]; + u64 phc_cycles; + + REG_RD_DMAE(bp, port ? NIG_REG_TIMESYNC_GEN_REG + tsgen_synctime_t1 : + NIG_REG_TIMESYNC_GEN_REG + tsgen_synctime_t0, wb_data, 2); + phc_cycles = wb_data[1]; + phc_cycles = (phc_cycles << 32) + wb_data[0]; + + DP(BNX2X_MSG_PTP, "PHC read cycles = %llu\n", phc_cycles); + + return phc_cycles; +} + +static void bnx2x_init_cyclecounter(struct bnx2x *bp) +{ + memset(&bp->cyclecounter, 0, sizeof(bp->cyclecounter)); + bp->cyclecounter.read = bnx2x_cyclecounter_read; + bp->cyclecounter.mask = CLOCKSOURCE_MASK(64); + bp->cyclecounter.shift = 1; + bp->cyclecounter.mult = 1; +} + +static int bnx2x_send_reset_timesync_ramrod(struct bnx2x *bp) +{ + struct bnx2x_func_state_params func_params = {NULL}; + struct bnx2x_func_set_timesync_params *set_timesync_params = + &func_params.params.set_timesync; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_SET_TIMESYNC; + + /* Function parameters */ + set_timesync_params->drift_adjust_cmd = TS_DRIFT_ADJUST_RESET; + set_timesync_params->offset_cmd = TS_OFFSET_KEEP; + + return bnx2x_func_state_change(bp, &func_params); +} + +int bnx2x_enable_ptp_packets(struct bnx2x *bp) +{ + struct bnx2x_queue_state_params q_params; + int rc, i; + + /* send queue update ramrod to enable PTP packets */ + memset(&q_params, 0, sizeof(q_params)); + __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); + q_params.cmd = BNX2X_Q_CMD_UPDATE; + __set_bit(BNX2X_Q_UPDATE_PTP_PKTS_CHNG, + &q_params.params.update.update_flags); + __set_bit(BNX2X_Q_UPDATE_PTP_PKTS, + &q_params.params.update.update_flags); + + /* send the ramrod on all the queues of the PF */ + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + /* Set the appropriate Queue object */ + q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; + + /* Update the Queue state */ + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) { + BNX2X_ERR("Failed to enable PTP packets\n"); + return rc; + } + } + + return 0; +} + +int bnx2x_configure_ptp_filters(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + int rc; + + if (!bp->hwtstamp_ioctl_called) + return 0; + + switch (bp->tx_type) { + case HWTSTAMP_TX_ON: + bp->flags |= TX_TIMESTAMPING_EN; + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK : + NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x6AA); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK : + NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3EEE); + break; + case HWTSTAMP_TX_ONESTEP_SYNC: + BNX2X_ERR("One-step timestamping is not supported\n"); + return -ERANGE; + } + + switch (bp->rx_filter) { + case HWTSTAMP_FILTER_NONE: + break; + case HWTSTAMP_FILTER_ALL: + case HWTSTAMP_FILTER_SOME: + bp->rx_filter = HWTSTAMP_FILTER_NONE; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + bp->rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; + /* Initialize PTP detection for UDP/IPv4 events */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7EE); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFE); + break; + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT; + /* Initialize PTP detection for UDP/IPv4 or UDP/IPv6 events */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7EA); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FEE); + break; + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; + /* Initialize PTP detection L2 events */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x6BF); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3EFF); + + break; + case HWTSTAMP_FILTER_PTP_V2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; + /* Initialize PTP detection L2, UDP/IPv4 or UDP/IPv6 events */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x6AA); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3EEE); + break; + } + + /* Indicate to FW that this PF expects recorded PTP packets */ + rc = bnx2x_enable_ptp_packets(bp); + if (rc) + return rc; + + /* Enable sending PTP packets to host */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST : + NIG_REG_P0_LLH_PTP_TO_HOST, 0x1); + + return 0; +} + +static int bnx2x_hwtstamp_ioctl(struct bnx2x *bp, struct ifreq *ifr) +{ + struct hwtstamp_config config; + int rc; + + DP(BNX2X_MSG_PTP, "HWTSTAMP IOCTL called\n"); + + if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) + return -EFAULT; + + DP(BNX2X_MSG_PTP, "Requested tx_type: %d, requested rx_filters = %d\n", + config.tx_type, config.rx_filter); + + if (config.flags) { + BNX2X_ERR("config.flags is reserved for future use\n"); + return -EINVAL; + } + + bp->hwtstamp_ioctl_called = 1; + bp->tx_type = config.tx_type; + bp->rx_filter = config.rx_filter; + + rc = bnx2x_configure_ptp_filters(bp); + if (rc) + return rc; + + config.rx_filter = bp->rx_filter; + + return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? + -EFAULT : 0; +} + +/* Configrues HW for PTP */ +static int bnx2x_configure_ptp(struct bnx2x *bp) +{ + int rc, port = BP_PORT(bp); + u32 wb_data[2]; + + /* Reset PTP event detection rules - will be configured in the IOCTL */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7FF); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFF); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK : + NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x7FF); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK : + NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3FFF); + + /* Disable PTP packets to host - will be configured in the IOCTL*/ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST : + NIG_REG_P0_LLH_PTP_TO_HOST, 0x0); + + /* Enable the PTP feature */ + REG_WR(bp, port ? NIG_REG_P1_PTP_EN : + NIG_REG_P0_PTP_EN, 0x3F); + + /* Enable the free-running counter */ + wb_data[0] = 0; + wb_data[1] = 0; + REG_WR_DMAE(bp, NIG_REG_TIMESYNC_GEN_REG + tsgen_ctrl, wb_data, 2); + + /* Reset drift register (offset register is not reset) */ + rc = bnx2x_send_reset_timesync_ramrod(bp); + if (rc) { + BNX2X_ERR("Failed to reset PHC drift register\n"); + return -EFAULT; + } + + /* Reset possibly old timestamps */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID : + NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID, 0x10000); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID : + NIG_REG_P0_TLLH_PTP_BUF_SEQID, 0x10000); + + return 0; +} + +/* Called during load, to initialize PTP-related stuff */ +void bnx2x_init_ptp(struct bnx2x *bp) +{ + int rc; + + /* Configure PTP in HW */ + rc = bnx2x_configure_ptp(bp); + if (rc) { + BNX2X_ERR("Stopping PTP initialization\n"); + return; + } + + /* Init work queue for Tx timestamping */ + INIT_WORK(&bp->ptp_task, bnx2x_ptp_task); + + /* Init cyclecounter and timecounter. This is done only in the first + * load. If done in every load, PTP application will fail when doing + * unload / load (e.g. MTU change) while it is running. + */ + if (!bp->timecounter_init_done) { + bnx2x_init_cyclecounter(bp); + timecounter_init(&bp->timecounter, &bp->cyclecounter, + ktime_to_ns(ktime_get_real())); + bp->timecounter_init_done = 1; + } + + DP(BNX2X_MSG_PTP, "PTP initialization ended successfully\n"); +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 2beb5430b876..b0779d773343 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -2182,6 +2182,45 @@ #define NIG_REG_P0_HWPFC_ENABLE 0x18078 #define NIG_REG_P0_LLH_FUNC_MEM2 0x18480 #define NIG_REG_P0_LLH_FUNC_MEM2_ENABLE 0x18440 +/* [RW 17] Packet TimeSync information that is buffered in 1-deep FIFOs for + * the host. Bits [15:0] return the sequence ID of the packet. Bit 16 + * indicates the validity of the data in the buffer. Writing a 1 to bit 16 + * will clear the buffer. + */ +#define NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID 0x1875c +/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for + * the host. This location returns the lower 32 bits of timestamp value. + */ +#define NIG_REG_P0_LLH_PTP_HOST_BUF_TS_LSB 0x18754 +/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for + * the host. This location returns the upper 32 bits of timestamp value. + */ +#define NIG_REG_P0_LLH_PTP_HOST_BUF_TS_MSB 0x18758 +/* [RW 11] Mask register for the various parameters used in determining PTP + * packet presence. Set each bit to 1 to mask out the particular parameter. + * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of + * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP + * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC + * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of + * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable + * MAC DA 2. The reset default is set to mask out all parameters. + */ +#define NIG_REG_P0_LLH_PTP_PARAM_MASK 0x187a0 +/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set + * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} . + * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP + * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1; + * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC + * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype + * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset + * default is to mask out all of the rules. Note that rules 0-3 are for IPv4 + * packets only and require that the packet is IPv4 for the rules to match. + * Note that rules 4-7 are for IPv6 packets only and require that the packet + * is IPv6 for the rules to match. + */ +#define NIG_REG_P0_LLH_PTP_RULE_MASK 0x187a4 +/* [RW 1] Set to 1 to enable PTP packets to be forwarded to the host. */ +#define NIG_REG_P0_LLH_PTP_TO_HOST 0x187ac /* [RW 1] Input enable for RX MAC interface. */ #define NIG_REG_P0_MAC_IN_EN 0x185ac /* [RW 1] Output enable for TX MAC interface */ @@ -2194,6 +2233,17 @@ * priority field is extracted from the outer-most VLAN in receive packet. * Only COS 0 and COS 1 are supported in E2. */ #define NIG_REG_P0_PKT_PRIORITY_TO_COS 0x18054 +/* [RW 6] Enable for TimeSync feature. Bits [2:0] are for RX side. Bits + * [5:3] are for TX side. Bit 0 enables TimeSync on RX side. Bit 1 enables + * V1 frame format in timesync event detection on RX side. Bit 2 enables V2 + * frame format in timesync event detection on RX side. Bit 3 enables + * TimeSync on TX side. Bit 4 enables V1 frame format in timesync event + * detection on TX side. Bit 5 enables V2 frame format in timesync event + * detection on TX side. Note that for HW to detect PTP packet and extract + * data from the packet, at least one of the version bits of that traffic + * direction has to be enabled. + */ +#define NIG_REG_P0_PTP_EN 0x18788 /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A * priority is mapped to COS 0 when the corresponding mask bit is 1. More * than one bit may be set; allowing multiple priorities to be mapped to one @@ -2300,7 +2350,46 @@ * Ethernet header. */ #define NIG_REG_P1_HDRS_AFTER_BASIC 0x1818c #define NIG_REG_P1_LLH_FUNC_MEM2 0x184c0 -#define NIG_REG_P1_LLH_FUNC_MEM2_ENABLE 0x18460 +#define NIG_REG_P1_LLH_FUNC_MEM2_ENABLE 0x18460a +/* [RW 17] Packet TimeSync information that is buffered in 1-deep FIFOs for + * the host. Bits [15:0] return the sequence ID of the packet. Bit 16 + * indicates the validity of the data in the buffer. Writing a 1 to bit 16 + * will clear the buffer. + */ +#define NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID 0x18774 +/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for + * the host. This location returns the lower 32 bits of timestamp value. + */ +#define NIG_REG_P1_LLH_PTP_HOST_BUF_TS_LSB 0x1876c +/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for + * the host. This location returns the upper 32 bits of timestamp value. + */ +#define NIG_REG_P1_LLH_PTP_HOST_BUF_TS_MSB 0x18770 +/* [RW 11] Mask register for the various parameters used in determining PTP + * packet presence. Set each bit to 1 to mask out the particular parameter. + * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of + * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP + * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC + * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of + * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable + * MAC DA 2. The reset default is set to mask out all parameters. + */ +#define NIG_REG_P1_LLH_PTP_PARAM_MASK 0x187c8 +/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set + * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} . + * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP + * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1; + * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC + * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype + * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset + * default is to mask out all of the rules. Note that rules 0-3 are for IPv4 + * packets only and require that the packet is IPv4 for the rules to match. + * Note that rules 4-7 are for IPv6 packets only and require that the packet + * is IPv6 for the rules to match. + */ +#define NIG_REG_P1_LLH_PTP_RULE_MASK 0x187cc +/* [RW 1] Set to 1 to enable PTP packets to be forwarded to the host. */ +#define NIG_REG_P1_LLH_PTP_TO_HOST 0x187d4 /* [RW 32] Specify the client number to be assigned to each priority of the * strict priority arbiter. This register specifies bits 31:0 of the 36-bit * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0 @@ -2342,6 +2431,17 @@ * priority field is extracted from the outer-most VLAN in receive packet. * Only COS 0 and COS 1 are supported in E2. */ #define NIG_REG_P1_PKT_PRIORITY_TO_COS 0x181a8 +/* [RW 6] Enable for TimeSync feature. Bits [2:0] are for RX side. Bits + * [5:3] are for TX side. Bit 0 enables TimeSync on RX side. Bit 1 enables + * V1 frame format in timesync event detection on RX side. Bit 2 enables V2 + * frame format in timesync event detection on RX side. Bit 3 enables + * TimeSync on TX side. Bit 4 enables V1 frame format in timesync event + * detection on TX side. Bit 5 enables V2 frame format in timesync event + * detection on TX side. Note that for HW to detect PTP packet and extract + * data from the packet, at least one of the version bits of that traffic + * direction has to be enabled. + */ +#define NIG_REG_P1_PTP_EN 0x187b0 /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A * priority is mapped to COS 0 when the corresponding mask bit is 1. More * than one bit may be set; allowing multiple priorities to be mapped to one @@ -2361,6 +2461,78 @@ #define NIG_REG_P1_RX_MACFIFO_EMPTY 0x1858c /* [R 1] TLLH FIFO is empty. */ #define NIG_REG_P1_TLLH_FIFO_EMPTY 0x18338 +/* [RW 19] Packet TimeSync information that is buffered in 1-deep FIFOs for + * TX side. Bits [15:0] reflect the sequence ID of the packet. Bit 16 + * indicates the validity of the data in the buffer. Bit 17 indicates that + * the sequence ID is valid and it is waiting for the TX timestamp value. + * Bit 18 indicates whether the timestamp is from a SW request (value of 1) + * or HW request (value of 0). Writing a 1 to bit 16 will clear the buffer. + */ +#define NIG_REG_P0_TLLH_PTP_BUF_SEQID 0x187e0 +/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for + * MCP. This location returns the lower 32 bits of timestamp value. + */ +#define NIG_REG_P0_TLLH_PTP_BUF_TS_LSB 0x187d8 +/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for + * MCP. This location returns the upper 32 bits of timestamp value. + */ +#define NIG_REG_P0_TLLH_PTP_BUF_TS_MSB 0x187dc +/* [RW 11] Mask register for the various parameters used in determining PTP + * packet presence. Set each bit to 1 to mask out the particular parameter. + * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of + * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP + * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC + * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of + * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable + * MAC DA 2. The reset default is set to mask out all parameters. + */ +#define NIG_REG_P0_TLLH_PTP_PARAM_MASK 0x187f0 +/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set + * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} . + * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP + * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1; + * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC + * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype + * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset + * default is to mask out all of the rules. + */ +#define NIG_REG_P0_TLLH_PTP_RULE_MASK 0x187f4 +/* [RW 19] Packet TimeSync information that is buffered in 1-deep FIFOs for + * TX side. Bits [15:0] reflect the sequence ID of the packet. Bit 16 + * indicates the validity of the data in the buffer. Bit 17 indicates that + * the sequence ID is valid and it is waiting for the TX timestamp value. + * Bit 18 indicates whether the timestamp is from a SW request (value of 1) + * or HW request (value of 0). Writing a 1 to bit 16 will clear the buffer. + */ +#define NIG_REG_P1_TLLH_PTP_BUF_SEQID 0x187ec +/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for + * MCP. This location returns the lower 32 bits of timestamp value. + */ +#define NIG_REG_P1_TLLH_PTP_BUF_TS_LSB 0x187e4 +/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for + * MCP. This location returns the upper 32 bits of timestamp value. + */ +#define NIG_REG_P1_TLLH_PTP_BUF_TS_MSB 0x187e8 +/* [RW 11] Mask register for the various parameters used in determining PTP + * packet presence. Set each bit to 1 to mask out the particular parameter. + * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of + * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP + * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC + * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of + * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable + * MAC DA 2. The reset default is set to mask out all parameters. + */ +#define NIG_REG_P1_TLLH_PTP_PARAM_MASK 0x187f8 +/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set + * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} . + * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP + * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1; + * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC + * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype + * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset + * default is to mask out all of the rules. + */ +#define NIG_REG_P1_TLLH_PTP_RULE_MASK 0x187fc /* [RW 32] Specify which of the credit registers the client is to be mapped * to. This register specifies bits 31:0 of the 36-bit value. Bits[3:0] are * for client 0; bits [35:32] are for client 8. For clients that are not @@ -2513,6 +2685,10 @@ swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then ort swap is equal to ~nig_registers_port_swap.port_swap */ #define NIG_REG_STRAP_OVERRIDE 0x10398 +/* [WB 64] Addresses for TimeSync related registers in the timesync + * generator sub-module. + */ +#define NIG_REG_TIMESYNC_GEN_REG 0x18800 /* [RW 1] output enable for RX_XCM0 IF */ #define NIG_REG_XCM0_OUT_EN 0x100f0 /* [RW 1] output enable for RX_XCM1 IF */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index d825ef6a9139..798e97fb63f7 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -4725,6 +4725,12 @@ static void bnx2x_q_fill_update_data(struct bnx2x *bp, data->tx_switching_change_flg = test_bit(BNX2X_Q_UPDATE_TX_SWITCHING_CHNG, ¶ms->update_flags); + + /* PTP */ + data->handle_ptp_pkts_flg = + test_bit(BNX2X_Q_UPDATE_PTP_PKTS, ¶ms->update_flags); + data->handle_ptp_pkts_change_flg = + test_bit(BNX2X_Q_UPDATE_PTP_PKTS_CHNG, ¶ms->update_flags); } static inline int bnx2x_q_send_update(struct bnx2x *bp, @@ -5379,6 +5385,10 @@ static int bnx2x_func_chk_transition(struct bnx2x *bp, (!test_bit(BNX2X_F_CMD_STOP, &o->pending))) next_state = BNX2X_F_STATE_STARTED; + else if ((cmd == BNX2X_F_CMD_SET_TIMESYNC) && + (!test_bit(BNX2X_F_CMD_STOP, &o->pending))) + next_state = BNX2X_F_STATE_STARTED; + else if (cmd == BNX2X_F_CMD_TX_STOP) next_state = BNX2X_F_STATE_TX_STOPPED; @@ -5388,6 +5398,10 @@ static int bnx2x_func_chk_transition(struct bnx2x *bp, (!test_bit(BNX2X_F_CMD_STOP, &o->pending))) next_state = BNX2X_F_STATE_TX_STOPPED; + else if ((cmd == BNX2X_F_CMD_SET_TIMESYNC) && + (!test_bit(BNX2X_F_CMD_STOP, &o->pending))) + next_state = BNX2X_F_STATE_TX_STOPPED; + else if (cmd == BNX2X_F_CMD_TX_START) next_state = BNX2X_F_STATE_STARTED; @@ -5843,6 +5857,40 @@ static inline int bnx2x_func_send_tx_start(struct bnx2x *bp, U64_LO(data_mapping), NONE_CONNECTION_TYPE); } +static inline +int bnx2x_func_send_set_timesync(struct bnx2x *bp, + struct bnx2x_func_state_params *params) +{ + struct bnx2x_func_sp_obj *o = params->f_obj; + struct set_timesync_ramrod_data *rdata = + (struct set_timesync_ramrod_data *)o->rdata; + dma_addr_t data_mapping = o->rdata_mapping; + struct bnx2x_func_set_timesync_params *set_timesync_params = + ¶ms->params.set_timesync; + + memset(rdata, 0, sizeof(*rdata)); + + /* Fill the ramrod data with provided parameters */ + rdata->drift_adjust_cmd = set_timesync_params->drift_adjust_cmd; + rdata->offset_cmd = set_timesync_params->offset_cmd; + rdata->add_sub_drift_adjust_value = + set_timesync_params->add_sub_drift_adjust_value; + rdata->drift_adjust_value = set_timesync_params->drift_adjust_value; + rdata->drift_adjust_period = set_timesync_params->drift_adjust_period; + rdata->offset_delta.lo = U64_LO(set_timesync_params->offset_delta); + rdata->offset_delta.hi = U64_HI(set_timesync_params->offset_delta); + + DP(BNX2X_MSG_SP, "Set timesync command params: drift_cmd = %d, offset_cmd = %d, add_sub_drift = %d, drift_val = %d, drift_period = %d, offset_lo = %d, offset_hi = %d\n", + rdata->drift_adjust_cmd, rdata->offset_cmd, + rdata->add_sub_drift_adjust_value, rdata->drift_adjust_value, + rdata->drift_adjust_period, rdata->offset_delta.lo, + rdata->offset_delta.hi); + + return bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_SET_TIMESYNC, 0, + U64_HI(data_mapping), + U64_LO(data_mapping), NONE_CONNECTION_TYPE); +} + static int bnx2x_func_send_cmd(struct bnx2x *bp, struct bnx2x_func_state_params *params) { @@ -5865,6 +5913,8 @@ static int bnx2x_func_send_cmd(struct bnx2x *bp, return bnx2x_func_send_tx_start(bp, params); case BNX2X_F_CMD_SWITCH_UPDATE: return bnx2x_func_send_switch_update(bp, params); + case BNX2X_F_CMD_SET_TIMESYNC: + return bnx2x_func_send_set_timesync(bp, params); default: BNX2X_ERR("Unknown command: %d\n", params->cmd); return -EINVAL; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h index 5ac247dd9834..21c8f6fb89e5 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h @@ -770,7 +770,9 @@ enum { BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG, BNX2X_Q_UPDATE_SILENT_VLAN_REM, BNX2X_Q_UPDATE_TX_SWITCHING_CHNG, - BNX2X_Q_UPDATE_TX_SWITCHING + BNX2X_Q_UPDATE_TX_SWITCHING, + BNX2X_Q_UPDATE_PTP_PKTS_CHNG, + BNX2X_Q_UPDATE_PTP_PKTS, }; /* Allowed Queue states */ @@ -853,6 +855,10 @@ enum bnx2x_q_type { #define BNX2X_MULTI_TX_COS 3 /* Maximum possible */ #define MAC_PAD (ALIGN(ETH_ALEN, sizeof(u32)) - ETH_ALEN) +/* DMAE channel to be used by FW for timesync workaroun. A driver that sends + * timesync-related ramrods must not use this DMAE command ID. + */ +#define FW_DMAE_CMD_ID 6 struct bnx2x_queue_init_params { struct { @@ -1117,6 +1123,7 @@ enum bnx2x_func_cmd { BNX2X_F_CMD_TX_STOP, BNX2X_F_CMD_TX_START, BNX2X_F_CMD_SWITCH_UPDATE, + BNX2X_F_CMD_SET_TIMESYNC, BNX2X_F_CMD_MAX, }; @@ -1191,6 +1198,7 @@ struct bnx2x_func_afex_viflists_params { u8 afex_vif_list_command; u8 func_to_clear; }; + struct bnx2x_func_tx_start_params { struct priority_cos traffic_type_to_priority_cos[MAX_TRAFFIC_TYPES]; u8 dcb_enabled; @@ -1198,6 +1206,24 @@ struct bnx2x_func_tx_start_params { u8 dont_add_pri_0_en; }; +struct bnx2x_func_set_timesync_params { + /* Reset, set or keep the current drift value */ + u8 drift_adjust_cmd; + + /* Dec, inc or keep the current offset */ + u8 offset_cmd; + + /* Drift value direction */ + u8 add_sub_drift_adjust_value; + + /* Drift, period and offset values to be used according to the commands + * above. + */ + u8 drift_adjust_value; + u32 drift_adjust_period; + u64 offset_delta; +}; + struct bnx2x_func_state_params { struct bnx2x_func_sp_obj *f_obj; @@ -1216,6 +1242,7 @@ struct bnx2x_func_state_params { struct bnx2x_func_afex_update_params afex_update; struct bnx2x_func_afex_viflists_params afex_viflists; struct bnx2x_func_tx_start_params tx_start; + struct bnx2x_func_set_timesync_params set_timesync; } params; }; -- cgit v1.2.3