From ee03b9b4479d1302d01cebedda3518dc967697b7 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Thu, 10 May 2018 22:21:48 +1000 Subject: powerpc/powernv: call OPAL_QUIESCE before OPAL_SIGNAL_SYSTEM_RESET Although it is often possible to recover a CPU that was interrupted from OPAL with a system reset NMI, it's undesirable to interrupt them for a few reasons. Firstly because dump/debug code itself needs to call firmware, so it could hang on a lock or possibly corrupt a per-cpu data structure if it or another CPU was interrupted from OPAL. Secondly, the kexec crash dump code will not return from interrupt to unwind the OPAL call. Call OPAL_QUIESCE with QUIESCE_HOLD before sending an NMI IPI to another CPU, which wait for it to leave firmware (or time out) to avoid this problem in normal conditions. Firmware bugs may still result in a timeout and interrupting OPAL, but that is the best option (stops the CPU, and possibly allows firmware to be debugged). Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/opal-api.h | 7 +++++++ arch/powerpc/include/asm/opal.h | 1 + arch/powerpc/platforms/powernv/opal-wrappers.S | 1 + arch/powerpc/platforms/powernv/smp.c | 17 ++++++++++++++++- 4 files changed, 25 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h index f34d173a2ebf..3bab299eda49 100644 --- a/arch/powerpc/include/asm/opal-api.h +++ b/arch/powerpc/include/asm/opal-api.h @@ -201,6 +201,7 @@ #define OPAL_SET_POWER_SHIFT_RATIO 155 #define OPAL_SENSOR_GROUP_CLEAR 156 #define OPAL_PCI_SET_P2P 157 +#define OPAL_QUIESCE 158 #define OPAL_NPU_SPA_SETUP 159 #define OPAL_NPU_SPA_CLEAR_CACHE 160 #define OPAL_NPU_TL_SET 161 @@ -209,6 +210,12 @@ #define OPAL_PCI_SET_PBCQ_TUNNEL_BAR 165 #define OPAL_LAST 165 +#define QUIESCE_HOLD 1 /* Spin all calls at entry */ +#define QUIESCE_REJECT 2 /* Fail all calls with OPAL_BUSY */ +#define QUIESCE_LOCK_BREAK 3 /* Set to ignore locks. */ +#define QUIESCE_RESUME 4 /* Un-quiesce */ +#define QUIESCE_RESUME_FAST_REBOOT 5 /* Un-quiesce, fast reboot */ + /* Device tree flags */ /* diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index 3960def0e39c..1dbeb6cd68fa 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -294,6 +294,7 @@ int opal_set_power_shift_ratio(u32 handle, int token, u32 psr); int opal_sensor_group_clear(u32 group_hndl, int token); s64 opal_signal_system_reset(s32 cpu); +s64 opal_quiesce(u64 shutdown_type, s32 cpu); /* Internal functions */ extern int early_init_dt_scan_opal(unsigned long node, const char *uname, diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S index 8482df255969..a8d9b4089c31 100644 --- a/arch/powerpc/platforms/powernv/opal-wrappers.S +++ b/arch/powerpc/platforms/powernv/opal-wrappers.S @@ -320,6 +320,7 @@ OPAL_CALL(opal_set_powercap, OPAL_SET_POWERCAP); OPAL_CALL(opal_get_power_shift_ratio, OPAL_GET_POWER_SHIFT_RATIO); OPAL_CALL(opal_set_power_shift_ratio, OPAL_SET_POWER_SHIFT_RATIO); OPAL_CALL(opal_sensor_group_clear, OPAL_SENSOR_GROUP_CLEAR); +OPAL_CALL(opal_quiesce, OPAL_QUIESCE); OPAL_CALL(opal_npu_spa_setup, OPAL_NPU_SPA_SETUP); OPAL_CALL(opal_npu_spa_clear_cache, OPAL_NPU_SPA_CLEAR_CACHE); OPAL_CALL(opal_npu_tl_set, OPAL_NPU_TL_SET); diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c index 19af6de6b6f0..b80909957792 100644 --- a/arch/powerpc/platforms/powernv/smp.c +++ b/arch/powerpc/platforms/powernv/smp.c @@ -334,7 +334,16 @@ static int pnv_cause_nmi_ipi(int cpu) int64_t rc; if (cpu >= 0) { - rc = opal_signal_system_reset(get_hard_smp_processor_id(cpu)); + int h = get_hard_smp_processor_id(cpu); + + if (opal_check_token(OPAL_QUIESCE)) + opal_quiesce(QUIESCE_HOLD, h); + + rc = opal_signal_system_reset(h); + + if (opal_check_token(OPAL_QUIESCE)) + opal_quiesce(QUIESCE_RESUME, h); + if (rc != OPAL_SUCCESS) return 0; return 1; @@ -343,6 +352,8 @@ static int pnv_cause_nmi_ipi(int cpu) bool success = true; int c; + if (opal_check_token(OPAL_QUIESCE)) + opal_quiesce(QUIESCE_HOLD, -1); /* * We do not use broadcasts (yet), because it's not clear @@ -358,6 +369,10 @@ static int pnv_cause_nmi_ipi(int cpu) if (rc != OPAL_SUCCESS) success = false; } + + if (opal_check_token(OPAL_QUIESCE)) + opal_quiesce(QUIESCE_RESUME, -1); + if (success) return 1; -- cgit v1.2.3