From ea336fa8eeb4b00f746983e3f24bc99e1547fb58 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 5 Jul 2014 09:36:07 +0400 Subject: ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx27-pdk.dts | 2 +- arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts | 2 +- arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi | 2 +- arch/arm/boot/dts/imx27.dtsi | 115 +++++++++++++++--------- 4 files changed, 77 insertions(+), 44 deletions(-) diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index 4c317716b510..49450dbbcab8 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -28,7 +28,7 @@ usbphy0: usbphy@0 { compatible = "usb-nop-xceiv"; reg = <0>; - clocks = <&clks 0>; + clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "main_clk"; }; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index fe02bc7a24fd..538568b0de26 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -61,7 +61,7 @@ compatible = "usb-nop-xceiv"; reg = <2>; vcc-supply = <®_5v0>; - clocks = <&clks 0>; + clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "main_clk"; }; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index 2e376edce972..b4e955e3be8d 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -51,7 +51,7 @@ compatible = "usb-nop-xceiv"; reg = <0>; vcc-supply = <&sw3_reg>; - clocks = <&clks 0>; + clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "main_clk"; }; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index a75555c39533..107d713e1cbe 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -11,9 +11,11 @@ #include "skeleton.dtsi" #include "imx27-pinfunc.h" + +#include +#include #include #include -#include / { aliases { @@ -68,7 +70,7 @@ 399000 1450000 >; clock-latency = <62500>; - clocks = <&clks 18>; + clocks = <&clks IMX27_CLK_CPU_DIV>; voltage-tolerance = <5>; }; }; @@ -91,7 +93,8 @@ compatible = "fsl,imx27-dma"; reg = <0x10001000 0x1000>; interrupts = <32>; - clocks = <&clks 50>, <&clks 70>; + clocks = <&clks IMX27_CLK_DMA_IPG_GATE>, + <&clks IMX27_CLK_DMA_AHB_GATE>; clock-names = "ipg", "ahb"; #dma-cells = <1>; #dma-channels = <16>; @@ -101,14 +104,15 @@ compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; reg = <0x10002000 0x1000>; interrupts = <27>; - clocks = <&clks 74>; + clocks = <&clks IMX27_CLK_WDOG_IPG_GATE>; }; gpt1: timer@10003000 { compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x10003000 0x1000>; interrupts = <26>; - clocks = <&clks 46>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -116,7 +120,8 @@ compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x10004000 0x1000>; interrupts = <25>; - clocks = <&clks 45>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -124,7 +129,8 @@ compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x10005000 0x1000>; interrupts = <24>; - clocks = <&clks 44>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -133,7 +139,8 @@ compatible = "fsl,imx27-pwm"; reg = <0x10006000 0x1000>; interrupts = <23>; - clocks = <&clks 34>, <&clks 61>; + clocks = <&clks IMX27_CLK_PWM_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -141,14 +148,14 @@ compatible = "fsl,imx27-kpp", "fsl,imx21-kpp"; reg = <0x10008000 0x1000>; interrupts = <21>; - clocks = <&clks 37>; + clocks = <&clks IMX27_CLK_KPP_IPG_GATE>; status = "disabled"; }; owire: owire@10009000 { compatible = "fsl,imx27-owire", "fsl,imx21-owire"; reg = <0x10009000 0x1000>; - clocks = <&clks 35>; + clocks = <&clks IMX27_CLK_OWIRE_IPG_GATE>; status = "disabled"; }; @@ -156,7 +163,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000a000 0x1000>; interrupts = <20>; - clocks = <&clks 81>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -165,7 +173,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000b000 0x1000>; interrupts = <19>; - clocks = <&clks 80>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART2_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -174,7 +183,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000c000 0x1000>; interrupts = <18>; - clocks = <&clks 79>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART3_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -183,7 +193,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000d000 0x1000>; interrupts = <17>; - clocks = <&clks 78>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART4_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -194,7 +205,8 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000e000 0x1000>; interrupts = <16>; - clocks = <&clks 53>, <&clks 60>; + clocks = <&clks IMX27_CLK_CSPI1_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -205,7 +217,8 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000f000 0x1000>; interrupts = <15>; - clocks = <&clks 52>, <&clks 60>; + clocks = <&clks IMX27_CLK_CSPI2_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -215,7 +228,7 @@ compatible = "fsl,imx27-ssi", "fsl,imx21-ssi"; reg = <0x10010000 0x1000>; interrupts = <14>; - clocks = <&clks 26>; + clocks = <&clks IMX27_CLK_SSI1_IPG_GATE>; dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>; dma-names = "rx0", "tx0", "rx1", "tx1"; fsl,fifo-depth = <8>; @@ -227,7 +240,7 @@ compatible = "fsl,imx27-ssi", "fsl,imx21-ssi"; reg = <0x10011000 0x1000>; interrupts = <13>; - clocks = <&clks 25>; + clocks = <&clks IMX27_CLK_SSI2_IPG_GATE>; dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>; dma-names = "rx0", "tx0", "rx1", "tx1"; fsl,fifo-depth = <8>; @@ -240,7 +253,7 @@ compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; reg = <0x10012000 0x1000>; interrupts = <12>; - clocks = <&clks 40>; + clocks = <&clks IMX27_CLK_I2C1_IPG_GATE>; status = "disabled"; }; @@ -248,7 +261,8 @@ compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x10013000 0x1000>; interrupts = <11>; - clocks = <&clks 30>, <&clks 60>; + clocks = <&clks IMX27_CLK_SDHC1_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; dmas = <&dma 7>; dma-names = "rx-tx"; @@ -259,7 +273,8 @@ compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x10014000 0x1000>; interrupts = <10>; - clocks = <&clks 29>, <&clks 60>; + clocks = <&clks IMX27_CLK_SDHC2_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; dmas = <&dma 6>; dma-names = "rx-tx"; @@ -276,6 +291,7 @@ gpio1: gpio@10015000 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015000 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -286,6 +302,7 @@ gpio2: gpio@10015100 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015100 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -296,6 +313,7 @@ gpio3: gpio@10015200 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015200 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -306,6 +324,7 @@ gpio4: gpio@10015300 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015300 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -316,6 +335,7 @@ gpio5: gpio@10015400 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015400 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -326,6 +346,7 @@ gpio6: gpio@10015500 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015500 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -337,7 +358,7 @@ audmux: audmux@10016000 { compatible = "fsl,imx27-audmux", "fsl,imx21-audmux"; reg = <0x10016000 0x1000>; - clocks = <&clks 0>; + clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "audmux"; status = "disabled"; }; @@ -348,7 +369,8 @@ compatible = "fsl,imx27-cspi"; reg = <0x10017000 0x1000>; interrupts = <6>; - clocks = <&clks 51>, <&clks 60>; + clocks = <&clks IMX27_CLK_CSPI3_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -357,7 +379,8 @@ compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x10019000 0x1000>; interrupts = <4>; - clocks = <&clks 43>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -365,7 +388,8 @@ compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x1001a000 0x1000>; interrupts = <3>; - clocks = <&clks 42>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -373,7 +397,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1001b000 0x1000>; interrupts = <49>; - clocks = <&clks 77>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART5_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -382,7 +407,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1001c000 0x1000>; interrupts = <48>; - clocks = <&clks 78>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART6_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -393,7 +419,7 @@ compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; reg = <0x1001d000 0x1000>; interrupts = <1>; - clocks = <&clks 39>; + clocks = <&clks IMX27_CLK_I2C2_IPG_GATE>; status = "disabled"; }; @@ -401,7 +427,8 @@ compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x1001e000 0x1000>; interrupts = <9>; - clocks = <&clks 28>, <&clks 60>; + clocks = <&clks IMX27_CLK_SDHC3_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; dmas = <&dma 36>; dma-names = "rx-tx"; @@ -412,7 +439,8 @@ compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x1001f000 0x1000>; interrupts = <2>; - clocks = <&clks 41>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; }; @@ -428,7 +456,9 @@ compatible = "fsl,imx27-fb", "fsl,imx21-fb"; interrupts = <61>; reg = <0x10021000 0x1000>; - clocks = <&clks 36>, <&clks 65>, <&clks 59>; + clocks = <&clks IMX27_CLK_LCDC_IPG_GATE>, + <&clks IMX27_CLK_LCDC_AHB_GATE>, + <&clks IMX27_CLK_PER3_GATE>; clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -437,7 +467,8 @@ compatible = "fsl,imx27-vpu"; reg = <0x10023000 0x0200>; interrupts = <53>; - clocks = <&clks 57>, <&clks 66>; + clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>, + <&clks IMX27_CLK_VPU_AHB_GATE>; clock-names = "per", "ahb"; iram = <&iram>; }; @@ -446,7 +477,7 @@ compatible = "fsl,imx27-usb"; reg = <0x10024000 0x200>; interrupts = <56>; - clocks = <&clks 75>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>; fsl,usbmisc = <&usbmisc 0>; status = "disabled"; }; @@ -455,7 +486,7 @@ compatible = "fsl,imx27-usb"; reg = <0x10024200 0x200>; interrupts = <54>; - clocks = <&clks 75>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>; fsl,usbmisc = <&usbmisc 1>; status = "disabled"; }; @@ -464,7 +495,7 @@ compatible = "fsl,imx27-usb"; reg = <0x10024400 0x200>; interrupts = <55>; - clocks = <&clks 75>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>; fsl,usbmisc = <&usbmisc 2>; status = "disabled"; }; @@ -473,14 +504,15 @@ #index-cells = <1>; compatible = "fsl,imx27-usbmisc"; reg = <0x10024600 0x200>; - clocks = <&clks 62>; + clocks = <&clks IMX27_CLK_USB_AHB_GATE>; }; sahara2: sahara@10025000 { compatible = "fsl,imx27-sahara"; reg = <0x10025000 0x1000>; interrupts = <59>; - clocks = <&clks 32>, <&clks 64>; + clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>, + <&clks IMX27_CLK_SAHARA_AHB_GATE>; clock-names = "ipg", "ahb"; }; @@ -494,14 +526,15 @@ compatible = "fsl,imx27-iim"; reg = <0x10028000 0x1000>; interrupts = <62>; - clocks = <&clks 38>; + clocks = <&clks IMX27_CLK_IIM_IPG_GATE>; }; fec: ethernet@1002b000 { compatible = "fsl,imx27-fec"; reg = <0x1002b000 0x4000>; interrupts = <50>; - clocks = <&clks 48>, <&clks 67>; + clocks = <&clks IMX27_CLK_FEC_IPG_GATE>, + <&clks IMX27_CLK_FEC_AHB_GATE>; clock-names = "ipg", "ahb"; status = "disabled"; }; @@ -513,7 +546,7 @@ compatible = "fsl,imx27-nand"; reg = <0xd8000000 0x1000>; interrupts = <29>; - clocks = <&clks 54>; + clocks = <&clks IMX27_CLK_NFC_BAUD_GATE>; status = "disabled"; }; @@ -522,7 +555,7 @@ #size-cells = <1>; compatible = "fsl,imx27-weim"; reg = <0xd8002000 0x1000>; - clocks = <&clks 0>; + clocks = <&clks IMX27_CLK_EMI_AHB_GATE>; ranges = < 0 0 0xc0000000 0x08000000 1 0 0xc8000000 0x08000000 -- cgit v1.2.3