From 855c1c2fce8bdbd796cba1d1456ca8f0e876c2f1 Mon Sep 17 00:00:00 2001 From: Chen Yu Date: Tue, 10 Apr 2018 23:07:51 +0800 Subject: ACPI / PM: Blacklist Low Power S0 Idle _DSM for ThinkPad X1 Tablet(2016) ThinkPad X1 Tablet(2016) is reported to have issues with the Low Power S0 Idle _DSM interface and since this machine model generally can do ACPI S3 just fine, and user would like to use S3 as default sleep model, add a blacklist entry to disable that interface for ThinkPad X1 Tablet(2016). Link: https://bugzilla.kernel.org/show_bug.cgi?id=199057 Reported-and-tested-by: Robin Lee Signed-off-by: Chen Yu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/sleep.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 99a1a650326d..974e58457697 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -364,6 +364,19 @@ static const struct dmi_system_id acpisleep_dmi_table[] __initconst = { DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9360"), }, }, + /* + * ThinkPad X1 Tablet(2016) cannot do suspend-to-idle using + * the Low Power S0 Idle firmware interface (see + * https://bugzilla.kernel.org/show_bug.cgi?id=199057). + */ + { + .callback = init_no_lps0, + .ident = "ThinkPad X1 Tablet(2016)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "20GGA00L00"), + }, + }, {}, }; -- cgit v1.2.3 From ae860a19f37c686e7c5816e96640168b7174a096 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Fri, 20 Apr 2018 15:22:02 +0300 Subject: PCI / PM: Do not clear state_saved in pci_pm_freeze() when smart suspend is set If a driver uses DPM_FLAG_SMART_SUSPEND and the device is already runtime suspended when hibernate is started PCI core skips runtime resuming the device but still clears pci_dev->state_saved. After the hibernation image is written pci_pm_thaw_noirq() makes sure subsequent thaw phases for the device are also skipped leaving it runtime suspended with pci_dev->state_saved == false. When the device is eventually runtime resumed pci_pm_runtime_resume() restores config space by calling pci_restore_standard_config(), however because pci_dev->state_saved == false pci_restore_state() never actually restores the config space leaving the device in a state that is not what the driver might expect. For example here is what happens for intel-lpss I2C devices once the hibernation snapshot is taken: intel-lpss 0000:00:15.0: power state changed by ACPI to D0 intel-lpss 0000:00:1e.0: power state changed by ACPI to D3cold video LNXVIDEO:00: Restoring backlight state PM: hibernation exit i2c_designware i2c_designware.1: Unknown Synopsys component type: 0xffffffff i2c_designware i2c_designware.0: Unknown Synopsys component type: 0xffffffff i2c_designware i2c_designware.1: timeout in disabling adapter i2c_designware i2c_designware.0: timeout in disabling adapter Since PCI config space is not restored the device is still in D3hot making MMIO register reads return 0xffffffff. Fix this by clearing pci_dev->state_saved only if we actually end up runtime resuming the device. Fixes: c4b65157aeef (PCI / PM: Take SMART_SUSPEND driver flag into account) Signed-off-by: Mika Westerberg Cc: 4.15+ # 4.15+ Signed-off-by: Rafael J. Wysocki --- drivers/pci/pci-driver.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 6ace47099fc5..b9a131137e64 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -958,10 +958,11 @@ static int pci_pm_freeze(struct device *dev) * devices should not be touched during freeze/thaw transitions, * however. */ - if (!dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND)) + if (!dev_pm_smart_suspend_and_suspended(dev)) { pm_runtime_resume(dev); + pci_dev->state_saved = false; + } - pci_dev->state_saved = false; if (pm->freeze) { int error; -- cgit v1.2.3 From ee53a65dc766384aaf1a26e3c43dd13456170b69 Mon Sep 17 00:00:00 2001 From: Markus Mayer Date: Wed, 18 Apr 2018 08:56:42 -0700 Subject: cpufreq: brcmstb-avs-cpufreq: remove development debug support This debug code was helpful while developing the driver, but it isn't being used for anything anymore. Signed-off-by: Markus Mayer Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/Kconfig.arm | 10 -- drivers/cpufreq/brcmstb-avs-cpufreq.c | 323 +--------------------------------- 2 files changed, 1 insertion(+), 332 deletions(-) diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 7f56fe5183f2..de55c7d57438 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -71,16 +71,6 @@ config ARM_BRCMSTB_AVS_CPUFREQ Say Y, if you have a Broadcom SoC with AVS support for DFS or DVFS. -config ARM_BRCMSTB_AVS_CPUFREQ_DEBUG - bool "Broadcom STB AVS CPUfreq driver sysfs debug capability" - depends on ARM_BRCMSTB_AVS_CPUFREQ - help - Enabling this option turns on debug support via sysfs under - /sys/kernel/debug/brcmstb-avs-cpufreq. It is possible to read all and - write some AVS mailbox registers through sysfs entries. - - If in doubt, say N. - config ARM_EXYNOS5440_CPUFREQ tristate "SAMSUNG EXYNOS5440" depends on SOC_EXYNOS5440 diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c index 6cdac1aaf23c..b07559b9ed99 100644 --- a/drivers/cpufreq/brcmstb-avs-cpufreq.c +++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c @@ -49,13 +49,6 @@ #include #include -#ifdef CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG -#include -#include -#include -#include -#endif - /* Max number of arguments AVS calls take */ #define AVS_MAX_CMD_ARGS 4 /* @@ -182,88 +175,11 @@ struct private_data { void __iomem *base; void __iomem *avs_intr_base; struct device *dev; -#ifdef CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG - struct dentry *debugfs; -#endif struct completion done; struct semaphore sem; struct pmap pmap; }; -#ifdef CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG - -enum debugfs_format { - DEBUGFS_NORMAL, - DEBUGFS_FLOAT, - DEBUGFS_REV, -}; - -struct debugfs_data { - struct debugfs_entry *entry; - struct private_data *priv; -}; - -struct debugfs_entry { - char *name; - u32 offset; - fmode_t mode; - enum debugfs_format format; -}; - -#define DEBUGFS_ENTRY(name, mode, format) { \ - #name, AVS_MBOX_##name, mode, format \ -} - -/* - * These are used for debugfs only. Otherwise we use AVS_MBOX_PARAM() directly. - */ -#define AVS_MBOX_PARAM1 AVS_MBOX_PARAM(0) -#define AVS_MBOX_PARAM2 AVS_MBOX_PARAM(1) -#define AVS_MBOX_PARAM3 AVS_MBOX_PARAM(2) -#define AVS_MBOX_PARAM4 AVS_MBOX_PARAM(3) - -/* - * This table stores the name, access permissions and offset for each hardware - * register and is used to generate debugfs entries. - */ -static struct debugfs_entry debugfs_entries[] = { - DEBUGFS_ENTRY(COMMAND, S_IWUSR, DEBUGFS_NORMAL), - DEBUGFS_ENTRY(STATUS, S_IWUSR, DEBUGFS_NORMAL), - DEBUGFS_ENTRY(VOLTAGE0, 0, DEBUGFS_FLOAT), - DEBUGFS_ENTRY(TEMP0, 0, DEBUGFS_FLOAT), - DEBUGFS_ENTRY(PV0, 0, DEBUGFS_FLOAT), - DEBUGFS_ENTRY(MV0, 0, DEBUGFS_FLOAT), - DEBUGFS_ENTRY(PARAM1, S_IWUSR, DEBUGFS_NORMAL), - DEBUGFS_ENTRY(PARAM2, S_IWUSR, DEBUGFS_NORMAL), - DEBUGFS_ENTRY(PARAM3, S_IWUSR, DEBUGFS_NORMAL), - DEBUGFS_ENTRY(PARAM4, S_IWUSR, DEBUGFS_NORMAL), - DEBUGFS_ENTRY(REVISION, 0, DEBUGFS_REV), - DEBUGFS_ENTRY(PSTATE, 0, DEBUGFS_NORMAL), - DEBUGFS_ENTRY(HEARTBEAT, 0, DEBUGFS_NORMAL), - DEBUGFS_ENTRY(MAGIC, S_IWUSR, DEBUGFS_NORMAL), - DEBUGFS_ENTRY(SIGMA_HVT, 0, DEBUGFS_NORMAL), - DEBUGFS_ENTRY(SIGMA_SVT, 0, DEBUGFS_NORMAL), - DEBUGFS_ENTRY(VOLTAGE1, 0, DEBUGFS_FLOAT), - DEBUGFS_ENTRY(TEMP1, 0, DEBUGFS_FLOAT), - DEBUGFS_ENTRY(PV1, 0, DEBUGFS_FLOAT), - DEBUGFS_ENTRY(MV1, 0, DEBUGFS_FLOAT), - DEBUGFS_ENTRY(FREQUENCY, 0, DEBUGFS_NORMAL), -}; - -static int brcm_avs_target_index(struct cpufreq_policy *, unsigned int); - -static char *__strtolower(char *s) -{ - char *p; - - for (p = s; *p; p++) - *p = tolower(*p); - - return s; -} - -#endif /* CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG */ - static void __iomem *__map_region(const char *name) { struct device_node *np; @@ -516,238 +432,6 @@ brcm_avs_get_freq_table(struct device *dev, struct private_data *priv) return table; } -#ifdef CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG - -#define MANT(x) (unsigned int)(abs((x)) / 1000) -#define FRAC(x) (unsigned int)(abs((x)) - abs((x)) / 1000 * 1000) - -static int brcm_avs_debug_show(struct seq_file *s, void *data) -{ - struct debugfs_data *dbgfs = s->private; - void __iomem *base; - u32 val, offset; - - if (!dbgfs) { - seq_puts(s, "No device pointer\n"); - return 0; - } - - base = dbgfs->priv->base; - offset = dbgfs->entry->offset; - val = readl(base + offset); - switch (dbgfs->entry->format) { - case DEBUGFS_NORMAL: - seq_printf(s, "%u\n", val); - break; - case DEBUGFS_FLOAT: - seq_printf(s, "%d.%03d\n", MANT(val), FRAC(val)); - break; - case DEBUGFS_REV: - seq_printf(s, "%c.%c.%c.%c\n", (val >> 24 & 0xff), - (val >> 16 & 0xff), (val >> 8 & 0xff), - val & 0xff); - break; - } - seq_printf(s, "0x%08x\n", val); - - return 0; -} - -#undef MANT -#undef FRAC - -static ssize_t brcm_avs_seq_write(struct file *file, const char __user *buf, - size_t size, loff_t *ppos) -{ - struct seq_file *s = file->private_data; - struct debugfs_data *dbgfs = s->private; - struct private_data *priv = dbgfs->priv; - void __iomem *base, *avs_intr_base; - bool use_issue_command = false; - unsigned long val, offset; - char str[128]; - int ret; - char *str_ptr = str; - - if (size >= sizeof(str)) - return -E2BIG; - - memset(str, 0, sizeof(str)); - ret = copy_from_user(str, buf, size); - if (ret) - return ret; - - base = priv->base; - avs_intr_base = priv->avs_intr_base; - offset = dbgfs->entry->offset; - /* - * Special case writing to "command" entry only: if the string starts - * with a 'c', we use the driver's __issue_avs_command() function. - * Otherwise, we perform a raw write. This should allow testing of raw - * access as well as using the higher level function. (Raw access - * doesn't clear the firmware return status after issuing the command.) - */ - if (str_ptr[0] == 'c' && offset == AVS_MBOX_COMMAND) { - use_issue_command = true; - str_ptr++; - } - if (kstrtoul(str_ptr, 0, &val) != 0) - return -EINVAL; - - /* - * Setting the P-state is a special case. We need to update the CPU - * frequency we report. - */ - if (val == AVS_CMD_SET_PSTATE) { - struct cpufreq_policy *policy; - unsigned int pstate; - - policy = cpufreq_cpu_get(smp_processor_id()); - /* Read back the P-state we are about to set */ - pstate = readl(base + AVS_MBOX_PARAM(0)); - if (use_issue_command) { - ret = brcm_avs_target_index(policy, pstate); - return ret ? ret : size; - } - policy->cur = policy->freq_table[pstate].frequency; - } - - if (use_issue_command) { - ret = __issue_avs_command(priv, val, false, NULL); - } else { - /* Locking here is not perfect, but is only for debug. */ - ret = down_interruptible(&priv->sem); - if (ret) - return ret; - - writel(val, base + offset); - /* We have to wake up the firmware to process a command. */ - if (offset == AVS_MBOX_COMMAND) - writel(AVS_CPU_L2_INT_MASK, - avs_intr_base + AVS_CPU_L2_SET0); - up(&priv->sem); - } - - return ret ? ret : size; -} - -static struct debugfs_entry *__find_debugfs_entry(const char *name) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(debugfs_entries); i++) - if (strcasecmp(debugfs_entries[i].name, name) == 0) - return &debugfs_entries[i]; - - return NULL; -} - -static int brcm_avs_debug_open(struct inode *inode, struct file *file) -{ - struct debugfs_data *data; - fmode_t fmode; - int ret; - - /* - * seq_open(), which is called by single_open(), clears "write" access. - * We need write access to some files, so we preserve our access mode - * and restore it. - */ - fmode = file->f_mode; - /* - * Check access permissions even for root. We don't want to be writing - * to read-only registers. Access for regular users has already been - * checked by the VFS layer. - */ - if ((fmode & FMODE_WRITER) && !(inode->i_mode & S_IWUSR)) - return -EACCES; - - data = kmalloc(sizeof(*data), GFP_KERNEL); - if (!data) - return -ENOMEM; - /* - * We use the same file system operations for all our debug files. To - * produce specific output, we look up the file name upon opening a - * debugfs entry and map it to a memory offset. This offset is then used - * in the generic "show" function to read a specific register. - */ - data->entry = __find_debugfs_entry(file->f_path.dentry->d_iname); - data->priv = inode->i_private; - - ret = single_open(file, brcm_avs_debug_show, data); - if (ret) - kfree(data); - file->f_mode = fmode; - - return ret; -} - -static int brcm_avs_debug_release(struct inode *inode, struct file *file) -{ - struct seq_file *seq_priv = file->private_data; - struct debugfs_data *data = seq_priv->private; - - kfree(data); - return single_release(inode, file); -} - -static const struct file_operations brcm_avs_debug_ops = { - .open = brcm_avs_debug_open, - .read = seq_read, - .write = brcm_avs_seq_write, - .llseek = seq_lseek, - .release = brcm_avs_debug_release, -}; - -static void brcm_avs_cpufreq_debug_init(struct platform_device *pdev) -{ - struct private_data *priv = platform_get_drvdata(pdev); - struct dentry *dir; - int i; - - if (!priv) - return; - - dir = debugfs_create_dir(BRCM_AVS_CPUFREQ_NAME, NULL); - if (IS_ERR_OR_NULL(dir)) - return; - priv->debugfs = dir; - - for (i = 0; i < ARRAY_SIZE(debugfs_entries); i++) { - /* - * The DEBUGFS_ENTRY macro generates uppercase strings. We - * convert them to lowercase before creating the debugfs - * entries. - */ - char *entry = __strtolower(debugfs_entries[i].name); - fmode_t mode = debugfs_entries[i].mode; - - if (!debugfs_create_file(entry, S_IFREG | S_IRUGO | mode, - dir, priv, &brcm_avs_debug_ops)) { - priv->debugfs = NULL; - debugfs_remove_recursive(dir); - break; - } - } -} - -static void brcm_avs_cpufreq_debug_exit(struct platform_device *pdev) -{ - struct private_data *priv = platform_get_drvdata(pdev); - - if (priv && priv->debugfs) { - debugfs_remove_recursive(priv->debugfs); - priv->debugfs = NULL; - } -} - -#else - -static void brcm_avs_cpufreq_debug_init(struct platform_device *pdev) {} -static void brcm_avs_cpufreq_debug_exit(struct platform_device *pdev) {} - -#endif /* CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG */ - /* * To ensure the right firmware is running we need to * - check the MAGIC matches what we expect @@ -1016,11 +700,8 @@ static int brcm_avs_cpufreq_probe(struct platform_device *pdev) return ret; brcm_avs_driver.driver_data = pdev; - ret = cpufreq_register_driver(&brcm_avs_driver); - if (!ret) - brcm_avs_cpufreq_debug_init(pdev); - return ret; + return cpufreq_register_driver(&brcm_avs_driver); } static int brcm_avs_cpufreq_remove(struct platform_device *pdev) @@ -1032,8 +713,6 @@ static int brcm_avs_cpufreq_remove(struct platform_device *pdev) if (ret) return ret; - brcm_avs_cpufreq_debug_exit(pdev); - priv = platform_get_drvdata(pdev); iounmap(priv->base); iounmap(priv->avs_intr_base); -- cgit v1.2.3