From d0b137062b2de75b264b84143d21c98abc5f5ad2 Mon Sep 17 00:00:00 2001 From: Luiz Augusto von Dentz Date: Wed, 27 Oct 2021 16:58:59 -0700 Subject: Bluetooth: hci_sync: Rework init stages This moves the init stages to use the hci_sync infra and in addition to that have the stages as function tables so it is easier to change the command sequence. Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann --- include/net/bluetooth/hci_sync.h | 1 + net/bluetooth/hci_core.c | 1203 +--------------------- net/bluetooth/hci_sync.c | 2053 ++++++++++++++++++++++++++++++++++---- 3 files changed, 1854 insertions(+), 1403 deletions(-) diff --git a/include/net/bluetooth/hci_sync.h b/include/net/bluetooth/hci_sync.h index db96546d40c8..487e4981cce1 100644 --- a/include/net/bluetooth/hci_sync.h +++ b/include/net/bluetooth/hci_sync.h @@ -83,6 +83,7 @@ int hci_remove_ext_adv_instance_sync(struct hci_dev *hdev, u8 instance, struct sk_buff *hci_read_local_oob_data_sync(struct hci_dev *hdev, bool ext, struct sock *sk); +int hci_reset_sync(struct hci_dev *hdev); int hci_dev_open_sync(struct hci_dev *hdev); int hci_dev_close_sync(struct hci_dev *hdev); diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 420ed6a02337..e0c0aa779dbc 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -62,824 +62,6 @@ DEFINE_MUTEX(hci_cb_list_lock); /* HCI ID Numbering */ static DEFINE_IDA(hci_index_ida); -static int hci_reset_req(struct hci_request *req, unsigned long opt) -{ - BT_DBG("%s %ld", req->hdev->name, opt); - - /* Reset device */ - set_bit(HCI_RESET, &req->hdev->flags); - hci_req_add(req, HCI_OP_RESET, 0, NULL); - return 0; -} - -static void bredr_init(struct hci_request *req) -{ - req->hdev->flow_ctl_mode = HCI_FLOW_CTL_MODE_PACKET_BASED; - - /* Read Local Supported Features */ - hci_req_add(req, HCI_OP_READ_LOCAL_FEATURES, 0, NULL); - - /* Read Local Version */ - hci_req_add(req, HCI_OP_READ_LOCAL_VERSION, 0, NULL); - - /* Read BD Address */ - hci_req_add(req, HCI_OP_READ_BD_ADDR, 0, NULL); -} - -static void amp_init1(struct hci_request *req) -{ - req->hdev->flow_ctl_mode = HCI_FLOW_CTL_MODE_BLOCK_BASED; - - /* Read Local Version */ - hci_req_add(req, HCI_OP_READ_LOCAL_VERSION, 0, NULL); - - /* Read Local Supported Commands */ - hci_req_add(req, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL); - - /* Read Local AMP Info */ - hci_req_add(req, HCI_OP_READ_LOCAL_AMP_INFO, 0, NULL); - - /* Read Data Blk size */ - hci_req_add(req, HCI_OP_READ_DATA_BLOCK_SIZE, 0, NULL); - - /* Read Flow Control Mode */ - hci_req_add(req, HCI_OP_READ_FLOW_CONTROL_MODE, 0, NULL); - - /* Read Location Data */ - hci_req_add(req, HCI_OP_READ_LOCATION_DATA, 0, NULL); -} - -static int amp_init2(struct hci_request *req) -{ - /* Read Local Supported Features. Not all AMP controllers - * support this so it's placed conditionally in the second - * stage init. - */ - if (req->hdev->commands[14] & 0x20) - hci_req_add(req, HCI_OP_READ_LOCAL_FEATURES, 0, NULL); - - return 0; -} - -static int hci_init1_req(struct hci_request *req, unsigned long opt) -{ - struct hci_dev *hdev = req->hdev; - - BT_DBG("%s %ld", hdev->name, opt); - - /* Reset */ - if (!test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) - hci_reset_req(req, 0); - - switch (hdev->dev_type) { - case HCI_PRIMARY: - bredr_init(req); - break; - case HCI_AMP: - amp_init1(req); - break; - default: - bt_dev_err(hdev, "Unknown device type %d", hdev->dev_type); - break; - } - - return 0; -} - -static void bredr_setup(struct hci_request *req) -{ - __le16 param; - __u8 flt_type; - - /* Read Buffer Size (ACL mtu, max pkt, etc.) */ - hci_req_add(req, HCI_OP_READ_BUFFER_SIZE, 0, NULL); - - /* Read Class of Device */ - hci_req_add(req, HCI_OP_READ_CLASS_OF_DEV, 0, NULL); - - /* Read Local Name */ - hci_req_add(req, HCI_OP_READ_LOCAL_NAME, 0, NULL); - - /* Read Voice Setting */ - hci_req_add(req, HCI_OP_READ_VOICE_SETTING, 0, NULL); - - /* Read Number of Supported IAC */ - hci_req_add(req, HCI_OP_READ_NUM_SUPPORTED_IAC, 0, NULL); - - /* Read Current IAC LAP */ - hci_req_add(req, HCI_OP_READ_CURRENT_IAC_LAP, 0, NULL); - - /* Clear Event Filters */ - flt_type = HCI_FLT_CLEAR_ALL; - hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &flt_type); - - /* Connection accept timeout ~20 secs */ - param = cpu_to_le16(0x7d00); - hci_req_add(req, HCI_OP_WRITE_CA_TIMEOUT, 2, ¶m); -} - -static void le_setup(struct hci_request *req) -{ - struct hci_dev *hdev = req->hdev; - - /* Read LE Buffer Size */ - hci_req_add(req, HCI_OP_LE_READ_BUFFER_SIZE, 0, NULL); - - /* Read LE Local Supported Features */ - hci_req_add(req, HCI_OP_LE_READ_LOCAL_FEATURES, 0, NULL); - - /* Read LE Supported States */ - hci_req_add(req, HCI_OP_LE_READ_SUPPORTED_STATES, 0, NULL); - - /* LE-only controllers have LE implicitly enabled */ - if (!lmp_bredr_capable(hdev)) - hci_dev_set_flag(hdev, HCI_LE_ENABLED); -} - -static void hci_setup_event_mask(struct hci_request *req) -{ - struct hci_dev *hdev = req->hdev; - - /* The second byte is 0xff instead of 0x9f (two reserved bits - * disabled) since a Broadcom 1.2 dongle doesn't respond to the - * command otherwise. - */ - u8 events[8] = { 0xff, 0xff, 0xfb, 0xff, 0x00, 0x00, 0x00, 0x00 }; - - /* CSR 1.1 dongles does not accept any bitfield so don't try to set - * any event mask for pre 1.2 devices. - */ - if (hdev->hci_ver < BLUETOOTH_VER_1_2) - return; - - if (lmp_bredr_capable(hdev)) { - events[4] |= 0x01; /* Flow Specification Complete */ - } else { - /* Use a different default for LE-only devices */ - memset(events, 0, sizeof(events)); - events[1] |= 0x20; /* Command Complete */ - events[1] |= 0x40; /* Command Status */ - events[1] |= 0x80; /* Hardware Error */ - - /* If the controller supports the Disconnect command, enable - * the corresponding event. In addition enable packet flow - * control related events. - */ - if (hdev->commands[0] & 0x20) { - events[0] |= 0x10; /* Disconnection Complete */ - events[2] |= 0x04; /* Number of Completed Packets */ - events[3] |= 0x02; /* Data Buffer Overflow */ - } - - /* If the controller supports the Read Remote Version - * Information command, enable the corresponding event. - */ - if (hdev->commands[2] & 0x80) - events[1] |= 0x08; /* Read Remote Version Information - * Complete - */ - - if (hdev->le_features[0] & HCI_LE_ENCRYPTION) { - events[0] |= 0x80; /* Encryption Change */ - events[5] |= 0x80; /* Encryption Key Refresh Complete */ - } - } - - if (lmp_inq_rssi_capable(hdev) || - test_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks)) - events[4] |= 0x02; /* Inquiry Result with RSSI */ - - if (lmp_ext_feat_capable(hdev)) - events[4] |= 0x04; /* Read Remote Extended Features Complete */ - - if (lmp_esco_capable(hdev)) { - events[5] |= 0x08; /* Synchronous Connection Complete */ - events[5] |= 0x10; /* Synchronous Connection Changed */ - } - - if (lmp_sniffsubr_capable(hdev)) - events[5] |= 0x20; /* Sniff Subrating */ - - if (lmp_pause_enc_capable(hdev)) - events[5] |= 0x80; /* Encryption Key Refresh Complete */ - - if (lmp_ext_inq_capable(hdev)) - events[5] |= 0x40; /* Extended Inquiry Result */ - - if (lmp_no_flush_capable(hdev)) - events[7] |= 0x01; /* Enhanced Flush Complete */ - - if (lmp_lsto_capable(hdev)) - events[6] |= 0x80; /* Link Supervision Timeout Changed */ - - if (lmp_ssp_capable(hdev)) { - events[6] |= 0x01; /* IO Capability Request */ - events[6] |= 0x02; /* IO Capability Response */ - events[6] |= 0x04; /* User Confirmation Request */ - events[6] |= 0x08; /* User Passkey Request */ - events[6] |= 0x10; /* Remote OOB Data Request */ - events[6] |= 0x20; /* Simple Pairing Complete */ - events[7] |= 0x04; /* User Passkey Notification */ - events[7] |= 0x08; /* Keypress Notification */ - events[7] |= 0x10; /* Remote Host Supported - * Features Notification - */ - } - - if (lmp_le_capable(hdev)) - events[7] |= 0x20; /* LE Meta-Event */ - - hci_req_add(req, HCI_OP_SET_EVENT_MASK, sizeof(events), events); -} - -static int hci_init2_req(struct hci_request *req, unsigned long opt) -{ - struct hci_dev *hdev = req->hdev; - - if (hdev->dev_type == HCI_AMP) - return amp_init2(req); - - if (lmp_bredr_capable(hdev)) - bredr_setup(req); - else - hci_dev_clear_flag(hdev, HCI_BREDR_ENABLED); - - if (lmp_le_capable(hdev)) - le_setup(req); - - /* All Bluetooth 1.2 and later controllers should support the - * HCI command for reading the local supported commands. - * - * Unfortunately some controllers indicate Bluetooth 1.2 support, - * but do not have support for this command. If that is the case, - * the driver can quirk the behavior and skip reading the local - * supported commands. - */ - if (hdev->hci_ver > BLUETOOTH_VER_1_1 && - !test_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks)) - hci_req_add(req, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL); - - if (lmp_ssp_capable(hdev)) { - /* When SSP is available, then the host features page - * should also be available as well. However some - * controllers list the max_page as 0 as long as SSP - * has not been enabled. To achieve proper debugging - * output, force the minimum max_page to 1 at least. - */ - hdev->max_page = 0x01; - - if (hci_dev_test_flag(hdev, HCI_SSP_ENABLED)) { - u8 mode = 0x01; - - hci_req_add(req, HCI_OP_WRITE_SSP_MODE, - sizeof(mode), &mode); - } else { - struct hci_cp_write_eir cp; - - memset(hdev->eir, 0, sizeof(hdev->eir)); - memset(&cp, 0, sizeof(cp)); - - hci_req_add(req, HCI_OP_WRITE_EIR, sizeof(cp), &cp); - } - } - - if (lmp_inq_rssi_capable(hdev) || - test_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks)) { - u8 mode; - - /* If Extended Inquiry Result events are supported, then - * they are clearly preferred over Inquiry Result with RSSI - * events. - */ - mode = lmp_ext_inq_capable(hdev) ? 0x02 : 0x01; - - hci_req_add(req, HCI_OP_WRITE_INQUIRY_MODE, 1, &mode); - } - - if (lmp_inq_tx_pwr_capable(hdev)) - hci_req_add(req, HCI_OP_READ_INQ_RSP_TX_POWER, 0, NULL); - - if (lmp_ext_feat_capable(hdev)) { - struct hci_cp_read_local_ext_features cp; - - cp.page = 0x01; - hci_req_add(req, HCI_OP_READ_LOCAL_EXT_FEATURES, - sizeof(cp), &cp); - } - - if (hci_dev_test_flag(hdev, HCI_LINK_SECURITY)) { - u8 enable = 1; - hci_req_add(req, HCI_OP_WRITE_AUTH_ENABLE, sizeof(enable), - &enable); - } - - return 0; -} - -static void hci_setup_link_policy(struct hci_request *req) -{ - struct hci_dev *hdev = req->hdev; - struct hci_cp_write_def_link_policy cp; - u16 link_policy = 0; - - if (lmp_rswitch_capable(hdev)) - link_policy |= HCI_LP_RSWITCH; - if (lmp_hold_capable(hdev)) - link_policy |= HCI_LP_HOLD; - if (lmp_sniff_capable(hdev)) - link_policy |= HCI_LP_SNIFF; - if (lmp_park_capable(hdev)) - link_policy |= HCI_LP_PARK; - - cp.policy = cpu_to_le16(link_policy); - hci_req_add(req, HCI_OP_WRITE_DEF_LINK_POLICY, sizeof(cp), &cp); -} - -static void hci_set_le_support(struct hci_request *req) -{ - struct hci_dev *hdev = req->hdev; - struct hci_cp_write_le_host_supported cp; - - /* LE-only devices do not support explicit enablement */ - if (!lmp_bredr_capable(hdev)) - return; - - memset(&cp, 0, sizeof(cp)); - - if (hci_dev_test_flag(hdev, HCI_LE_ENABLED)) { - cp.le = 0x01; - cp.simul = 0x00; - } - - if (cp.le != lmp_host_le_capable(hdev)) - hci_req_add(req, HCI_OP_WRITE_LE_HOST_SUPPORTED, sizeof(cp), - &cp); -} - -static void hci_set_event_mask_page_2(struct hci_request *req) -{ - struct hci_dev *hdev = req->hdev; - u8 events[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - bool changed = false; - - /* If Connectionless Peripheral Broadcast central role is supported - * enable all necessary events for it. - */ - if (lmp_cpb_central_capable(hdev)) { - events[1] |= 0x40; /* Triggered Clock Capture */ - events[1] |= 0x80; /* Synchronization Train Complete */ - events[2] |= 0x10; /* Peripheral Page Response Timeout */ - events[2] |= 0x20; /* CPB Channel Map Change */ - changed = true; - } - - /* If Connectionless Peripheral Broadcast peripheral role is supported - * enable all necessary events for it. - */ - if (lmp_cpb_peripheral_capable(hdev)) { - events[2] |= 0x01; /* Synchronization Train Received */ - events[2] |= 0x02; /* CPB Receive */ - events[2] |= 0x04; /* CPB Timeout */ - events[2] |= 0x08; /* Truncated Page Complete */ - changed = true; - } - - /* Enable Authenticated Payload Timeout Expired event if supported */ - if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) { - events[2] |= 0x80; - changed = true; - } - - /* Some Broadcom based controllers indicate support for Set Event - * Mask Page 2 command, but then actually do not support it. Since - * the default value is all bits set to zero, the command is only - * required if the event mask has to be changed. In case no change - * to the event mask is needed, skip this command. - */ - if (changed) - hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, - sizeof(events), events); -} - -static int hci_init3_req(struct hci_request *req, unsigned long opt) -{ - struct hci_dev *hdev = req->hdev; - u8 p; - - hci_setup_event_mask(req); - - if (hdev->commands[6] & 0x20 && - !test_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks)) { - struct hci_cp_read_stored_link_key cp; - - bacpy(&cp.bdaddr, BDADDR_ANY); - cp.read_all = 0x01; - hci_req_add(req, HCI_OP_READ_STORED_LINK_KEY, sizeof(cp), &cp); - } - - if (hdev->commands[5] & 0x10) - hci_setup_link_policy(req); - - if (hdev->commands[8] & 0x01) - hci_req_add(req, HCI_OP_READ_PAGE_SCAN_ACTIVITY, 0, NULL); - - if (hdev->commands[18] & 0x04 && - !test_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks)) - hci_req_add(req, HCI_OP_READ_DEF_ERR_DATA_REPORTING, 0, NULL); - - /* Some older Broadcom based Bluetooth 1.2 controllers do not - * support the Read Page Scan Type command. Check support for - * this command in the bit mask of supported commands. - */ - if (hdev->commands[13] & 0x01) - hci_req_add(req, HCI_OP_READ_PAGE_SCAN_TYPE, 0, NULL); - - if (lmp_le_capable(hdev)) { - u8 events[8]; - - memset(events, 0, sizeof(events)); - - if (hdev->le_features[0] & HCI_LE_ENCRYPTION) - events[0] |= 0x10; /* LE Long Term Key Request */ - - /* If controller supports the Connection Parameters Request - * Link Layer Procedure, enable the corresponding event. - */ - if (hdev->le_features[0] & HCI_LE_CONN_PARAM_REQ_PROC) - events[0] |= 0x20; /* LE Remote Connection - * Parameter Request - */ - - /* If the controller supports the Data Length Extension - * feature, enable the corresponding event. - */ - if (hdev->le_features[0] & HCI_LE_DATA_LEN_EXT) - events[0] |= 0x40; /* LE Data Length Change */ - - /* If the controller supports LL Privacy feature, enable - * the corresponding event. - */ - if (hdev->le_features[0] & HCI_LE_LL_PRIVACY) - events[1] |= 0x02; /* LE Enhanced Connection - * Complete - */ - - /* If the controller supports Extended Scanner Filter - * Policies, enable the corresponding event. - */ - if (hdev->le_features[0] & HCI_LE_EXT_SCAN_POLICY) - events[1] |= 0x04; /* LE Direct Advertising - * Report - */ - - /* If the controller supports Channel Selection Algorithm #2 - * feature, enable the corresponding event. - */ - if (hdev->le_features[1] & HCI_LE_CHAN_SEL_ALG2) - events[2] |= 0x08; /* LE Channel Selection - * Algorithm - */ - - /* If the controller supports the LE Set Scan Enable command, - * enable the corresponding advertising report event. - */ - if (hdev->commands[26] & 0x08) - events[0] |= 0x02; /* LE Advertising Report */ - - /* If the controller supports the LE Create Connection - * command, enable the corresponding event. - */ - if (hdev->commands[26] & 0x10) - events[0] |= 0x01; /* LE Connection Complete */ - - /* If the controller supports the LE Connection Update - * command, enable the corresponding event. - */ - if (hdev->commands[27] & 0x04) - events[0] |= 0x04; /* LE Connection Update - * Complete - */ - - /* If the controller supports the LE Read Remote Used Features - * command, enable the corresponding event. - */ - if (hdev->commands[27] & 0x20) - events[0] |= 0x08; /* LE Read Remote Used - * Features Complete - */ - - /* If the controller supports the LE Read Local P-256 - * Public Key command, enable the corresponding event. - */ - if (hdev->commands[34] & 0x02) - events[0] |= 0x80; /* LE Read Local P-256 - * Public Key Complete - */ - - /* If the controller supports the LE Generate DHKey - * command, enable the corresponding event. - */ - if (hdev->commands[34] & 0x04) - events[1] |= 0x01; /* LE Generate DHKey Complete */ - - /* If the controller supports the LE Set Default PHY or - * LE Set PHY commands, enable the corresponding event. - */ - if (hdev->commands[35] & (0x20 | 0x40)) - events[1] |= 0x08; /* LE PHY Update Complete */ - - /* If the controller supports LE Set Extended Scan Parameters - * and LE Set Extended Scan Enable commands, enable the - * corresponding event. - */ - if (use_ext_scan(hdev)) - events[1] |= 0x10; /* LE Extended Advertising - * Report - */ - - /* If the controller supports the LE Extended Advertising - * command, enable the corresponding event. - */ - if (ext_adv_capable(hdev)) - events[2] |= 0x02; /* LE Advertising Set - * Terminated - */ - - hci_req_add(req, HCI_OP_LE_SET_EVENT_MASK, sizeof(events), - events); - - /* Read LE Advertising Channel TX Power */ - if ((hdev->commands[25] & 0x40) && !ext_adv_capable(hdev)) { - /* HCI TS spec forbids mixing of legacy and extended - * advertising commands wherein READ_ADV_TX_POWER is - * also included. So do not call it if extended adv - * is supported otherwise controller will return - * COMMAND_DISALLOWED for extended commands. - */ - hci_req_add(req, HCI_OP_LE_READ_ADV_TX_POWER, 0, NULL); - } - - if (hdev->commands[38] & 0x80) { - /* Read LE Min/Max Tx Power*/ - hci_req_add(req, HCI_OP_LE_READ_TRANSMIT_POWER, - 0, NULL); - } - - if (hdev->commands[26] & 0x40) { - /* Read LE Accept List Size */ - hci_req_add(req, HCI_OP_LE_READ_ACCEPT_LIST_SIZE, - 0, NULL); - } - - if (hdev->commands[26] & 0x80) { - /* Clear LE Accept List */ - hci_req_add(req, HCI_OP_LE_CLEAR_ACCEPT_LIST, 0, NULL); - } - - if (hdev->commands[34] & 0x40) { - /* Read LE Resolving List Size */ - hci_req_add(req, HCI_OP_LE_READ_RESOLV_LIST_SIZE, - 0, NULL); - } - - if (hdev->commands[34] & 0x20) { - /* Clear LE Resolving List */ - hci_req_add(req, HCI_OP_LE_CLEAR_RESOLV_LIST, 0, NULL); - } - - if (hdev->commands[35] & 0x04) { - __le16 rpa_timeout = cpu_to_le16(hdev->rpa_timeout); - - /* Set RPA timeout */ - hci_req_add(req, HCI_OP_LE_SET_RPA_TIMEOUT, 2, - &rpa_timeout); - } - - if (hdev->le_features[0] & HCI_LE_DATA_LEN_EXT) { - /* Read LE Maximum Data Length */ - hci_req_add(req, HCI_OP_LE_READ_MAX_DATA_LEN, 0, NULL); - - /* Read LE Suggested Default Data Length */ - hci_req_add(req, HCI_OP_LE_READ_DEF_DATA_LEN, 0, NULL); - } - - if (ext_adv_capable(hdev)) { - /* Read LE Number of Supported Advertising Sets */ - hci_req_add(req, HCI_OP_LE_READ_NUM_SUPPORTED_ADV_SETS, - 0, NULL); - } - - hci_set_le_support(req); - } - - /* Read features beyond page 1 if available */ - for (p = 2; p < HCI_MAX_PAGES && p <= hdev->max_page; p++) { - struct hci_cp_read_local_ext_features cp; - - cp.page = p; - hci_req_add(req, HCI_OP_READ_LOCAL_EXT_FEATURES, - sizeof(cp), &cp); - } - - return 0; -} - -static int hci_init4_req(struct hci_request *req, unsigned long opt) -{ - struct hci_dev *hdev = req->hdev; - - /* Some Broadcom based Bluetooth controllers do not support the - * Delete Stored Link Key command. They are clearly indicating its - * absence in the bit mask of supported commands. - * - * Check the supported commands and only if the command is marked - * as supported send it. If not supported assume that the controller - * does not have actual support for stored link keys which makes this - * command redundant anyway. - * - * Some controllers indicate that they support handling deleting - * stored link keys, but they don't. The quirk lets a driver - * just disable this command. - */ - if (hdev->commands[6] & 0x80 && - !test_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks)) { - struct hci_cp_delete_stored_link_key cp; - - bacpy(&cp.bdaddr, BDADDR_ANY); - cp.delete_all = 0x01; - hci_req_add(req, HCI_OP_DELETE_STORED_LINK_KEY, - sizeof(cp), &cp); - } - - /* Set event mask page 2 if the HCI command for it is supported */ - if (hdev->commands[22] & 0x04) - hci_set_event_mask_page_2(req); - - /* Read local pairing options if the HCI command is supported */ - if (hdev->commands[41] & 0x08) - hci_req_add(req, HCI_OP_READ_LOCAL_PAIRING_OPTS, 0, NULL); - - /* Get MWS transport configuration if the HCI command is supported */ - if (hdev->commands[30] & 0x08) - hci_req_add(req, HCI_OP_GET_MWS_TRANSPORT_CONFIG, 0, NULL); - - /* Check for Synchronization Train support */ - if (lmp_sync_train_capable(hdev)) - hci_req_add(req, HCI_OP_READ_SYNC_TRAIN_PARAMS, 0, NULL); - - /* Enable Secure Connections if supported and configured */ - if (hci_dev_test_flag(hdev, HCI_SSP_ENABLED) && - bredr_sc_enabled(hdev)) { - u8 support = 0x01; - - hci_req_add(req, HCI_OP_WRITE_SC_SUPPORT, - sizeof(support), &support); - } - - /* Set erroneous data reporting if supported to the wideband speech - * setting value - */ - if (hdev->commands[18] & 0x08 && - !test_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks)) { - bool enabled = hci_dev_test_flag(hdev, - HCI_WIDEBAND_SPEECH_ENABLED); - - if (enabled != - (hdev->err_data_reporting == ERR_DATA_REPORTING_ENABLED)) { - struct hci_cp_write_def_err_data_reporting cp; - - cp.err_data_reporting = enabled ? - ERR_DATA_REPORTING_ENABLED : - ERR_DATA_REPORTING_DISABLED; - - hci_req_add(req, HCI_OP_WRITE_DEF_ERR_DATA_REPORTING, - sizeof(cp), &cp); - } - } - - /* Set Suggested Default Data Length to maximum if supported */ - if (hdev->le_features[0] & HCI_LE_DATA_LEN_EXT) { - struct hci_cp_le_write_def_data_len cp; - - cp.tx_len = cpu_to_le16(hdev->le_max_tx_len); - cp.tx_time = cpu_to_le16(hdev->le_max_tx_time); - hci_req_add(req, HCI_OP_LE_WRITE_DEF_DATA_LEN, sizeof(cp), &cp); - } - - /* Set Default PHY parameters if command is supported */ - if (hdev->commands[35] & 0x20) { - struct hci_cp_le_set_default_phy cp; - - cp.all_phys = 0x00; - cp.tx_phys = hdev->le_tx_def_phys; - cp.rx_phys = hdev->le_rx_def_phys; - - hci_req_add(req, HCI_OP_LE_SET_DEFAULT_PHY, sizeof(cp), &cp); - } - - return 0; -} - -static int __hci_init(struct hci_dev *hdev) -{ - int err; - - err = __hci_req_sync(hdev, hci_init1_req, 0, HCI_INIT_TIMEOUT, NULL); - if (err < 0) - return err; - - if (hci_dev_test_flag(hdev, HCI_SETUP)) - hci_debugfs_create_basic(hdev); - - err = __hci_req_sync(hdev, hci_init2_req, 0, HCI_INIT_TIMEOUT, NULL); - if (err < 0) - return err; - - /* HCI_PRIMARY covers both single-mode LE, BR/EDR and dual-mode - * BR/EDR/LE type controllers. AMP controllers only need the - * first two stages of init. - */ - if (hdev->dev_type != HCI_PRIMARY) - return 0; - - err = __hci_req_sync(hdev, hci_init3_req, 0, HCI_INIT_TIMEOUT, NULL); - if (err < 0) - return err; - - err = __hci_req_sync(hdev, hci_init4_req, 0, HCI_INIT_TIMEOUT, NULL); - if (err < 0) - return err; - - /* Read local codec list if the HCI command is supported */ - if (hdev->commands[45] & 0x04) - hci_read_supported_codecs_v2(hdev); - else if (hdev->commands[29] & 0x20) - hci_read_supported_codecs(hdev); - - /* This function is only called when the controller is actually in - * configured state. When the controller is marked as unconfigured, - * this initialization procedure is not run. - * - * It means that it is possible that a controller runs through its - * setup phase and then discovers missing settings. If that is the - * case, then this function will not be called. It then will only - * be called during the config phase. - * - * So only when in setup phase or config phase, create the debugfs - * entries and register the SMP channels. - */ - if (!hci_dev_test_flag(hdev, HCI_SETUP) && - !hci_dev_test_flag(hdev, HCI_CONFIG)) - return 0; - - hci_debugfs_create_common(hdev); - - if (lmp_bredr_capable(hdev)) - hci_debugfs_create_bredr(hdev); - - if (lmp_le_capable(hdev)) - hci_debugfs_create_le(hdev); - - return 0; -} - -static int hci_init0_req(struct hci_request *req, unsigned long opt) -{ - struct hci_dev *hdev = req->hdev; - - BT_DBG("%s %ld", hdev->name, opt); - - /* Reset */ - if (!test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) - hci_reset_req(req, 0); - - /* Read Local Version */ - hci_req_add(req, HCI_OP_READ_LOCAL_VERSION, 0, NULL); - - /* Read BD Address */ - if (hdev->set_bdaddr) - hci_req_add(req, HCI_OP_READ_BD_ADDR, 0, NULL); - - return 0; -} - -static int __hci_unconf_init(struct hci_dev *hdev) -{ - int err; - - if (test_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks)) - return 0; - - err = __hci_req_sync(hdev, hci_init0_req, 0, HCI_INIT_TIMEOUT, NULL); - if (err < 0) - return err; - - if (hci_dev_test_flag(hdev, HCI_SETUP)) - hci_debugfs_create_basic(hdev); - - return 0; -} - static int hci_scan_req(struct hci_request *req, unsigned long opt) { __u8 scan = opt; @@ -1289,240 +471,6 @@ done: return err; } -/** - * hci_dev_get_bd_addr_from_property - Get the Bluetooth Device Address - * (BD_ADDR) for a HCI device from - * a firmware node property. - * @hdev: The HCI device - * - * Search the firmware node for 'local-bd-address'. - * - * All-zero BD addresses are rejected, because those could be properties - * that exist in the firmware tables, but were not updated by the firmware. For - * example, the DTS could define 'local-bd-address', with zero BD addresses. - */ -static void hci_dev_get_bd_addr_from_property(struct hci_dev *hdev) -{ - struct fwnode_handle *fwnode = dev_fwnode(hdev->dev.parent); - bdaddr_t ba; - int ret; - - ret = fwnode_property_read_u8_array(fwnode, "local-bd-address", - (u8 *)&ba, sizeof(ba)); - if (ret < 0 || !bacmp(&ba, BDADDR_ANY)) - return; - - bacpy(&hdev->public_addr, &ba); -} - -/* TODO: Move this function into hci_sync.c */ -int hci_dev_open_sync(struct hci_dev *hdev) -{ - int ret = 0; - - BT_DBG("%s %p", hdev->name, hdev); - - if (hci_dev_test_flag(hdev, HCI_UNREGISTER)) { - ret = -ENODEV; - goto done; - } - - if (!hci_dev_test_flag(hdev, HCI_SETUP) && - !hci_dev_test_flag(hdev, HCI_CONFIG)) { - /* Check for rfkill but allow the HCI setup stage to - * proceed (which in itself doesn't cause any RF activity). - */ - if (hci_dev_test_flag(hdev, HCI_RFKILLED)) { - ret = -ERFKILL; - goto done; - } - - /* Check for valid public address or a configured static - * random address, but let the HCI setup proceed to - * be able to determine if there is a public address - * or not. - * - * In case of user channel usage, it is not important - * if a public address or static random address is - * available. - * - * This check is only valid for BR/EDR controllers - * since AMP controllers do not have an address. - */ - if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && - hdev->dev_type == HCI_PRIMARY && - !bacmp(&hdev->bdaddr, BDADDR_ANY) && - !bacmp(&hdev->static_addr, BDADDR_ANY)) { - ret = -EADDRNOTAVAIL; - goto done; - } - } - - if (test_bit(HCI_UP, &hdev->flags)) { - ret = -EALREADY; - goto done; - } - - if (hdev->open(hdev)) { - ret = -EIO; - goto done; - } - - set_bit(HCI_RUNNING, &hdev->flags); - hci_sock_dev_event(hdev, HCI_DEV_OPEN); - - atomic_set(&hdev->cmd_cnt, 1); - set_bit(HCI_INIT, &hdev->flags); - - if (hci_dev_test_flag(hdev, HCI_SETUP) || - test_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks)) { - bool invalid_bdaddr; - - hci_sock_dev_event(hdev, HCI_DEV_SETUP); - - if (hdev->setup) - ret = hdev->setup(hdev); - - /* The transport driver can set the quirk to mark the - * BD_ADDR invalid before creating the HCI device or in - * its setup callback. - */ - invalid_bdaddr = test_bit(HCI_QUIRK_INVALID_BDADDR, - &hdev->quirks); - - if (ret) - goto setup_failed; - - if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) { - if (!bacmp(&hdev->public_addr, BDADDR_ANY)) - hci_dev_get_bd_addr_from_property(hdev); - - if (bacmp(&hdev->public_addr, BDADDR_ANY) && - hdev->set_bdaddr) { - ret = hdev->set_bdaddr(hdev, - &hdev->public_addr); - - /* If setting of the BD_ADDR from the device - * property succeeds, then treat the address - * as valid even if the invalid BD_ADDR - * quirk indicates otherwise. - */ - if (!ret) - invalid_bdaddr = false; - } - } - -setup_failed: - /* The transport driver can set these quirks before - * creating the HCI device or in its setup callback. - * - * For the invalid BD_ADDR quirk it is possible that - * it becomes a valid address if the bootloader does - * provide it (see above). - * - * In case any of them is set, the controller has to - * start up as unconfigured. - */ - if (test_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks) || - invalid_bdaddr) - hci_dev_set_flag(hdev, HCI_UNCONFIGURED); - - /* For an unconfigured controller it is required to - * read at least the version information provided by - * the Read Local Version Information command. - * - * If the set_bdaddr driver callback is provided, then - * also the original Bluetooth public device address - * will be read using the Read BD Address command. - */ - if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) - ret = __hci_unconf_init(hdev); - } - - if (hci_dev_test_flag(hdev, HCI_CONFIG)) { - /* If public address change is configured, ensure that - * the address gets programmed. If the driver does not - * support changing the public address, fail the power - * on procedure. - */ - if (bacmp(&hdev->public_addr, BDADDR_ANY) && - hdev->set_bdaddr) - ret = hdev->set_bdaddr(hdev, &hdev->public_addr); - else - ret = -EADDRNOTAVAIL; - } - - if (!ret) { - if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && - !hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { - ret = __hci_init(hdev); - if (!ret && hdev->post_init) - ret = hdev->post_init(hdev); - } - } - - /* If the HCI Reset command is clearing all diagnostic settings, - * then they need to be reprogrammed after the init procedure - * completed. - */ - if (test_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks) && - !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && - hci_dev_test_flag(hdev, HCI_VENDOR_DIAG) && hdev->set_diag) - ret = hdev->set_diag(hdev, true); - - msft_do_open(hdev); - aosp_do_open(hdev); - - clear_bit(HCI_INIT, &hdev->flags); - - if (!ret) { - hci_dev_hold(hdev); - hci_dev_set_flag(hdev, HCI_RPA_EXPIRED); - hci_adv_instances_set_rpa_expired(hdev, true); - set_bit(HCI_UP, &hdev->flags); - hci_sock_dev_event(hdev, HCI_DEV_UP); - hci_leds_update_powered(hdev, true); - if (!hci_dev_test_flag(hdev, HCI_SETUP) && - !hci_dev_test_flag(hdev, HCI_CONFIG) && - !hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && - !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && - hci_dev_test_flag(hdev, HCI_MGMT) && - hdev->dev_type == HCI_PRIMARY) { - ret = hci_powered_update_sync(hdev); - } - } else { - /* Init failed, cleanup */ - flush_work(&hdev->tx_work); - - /* Since hci_rx_work() is possible to awake new cmd_work - * it should be flushed first to avoid unexpected call of - * hci_cmd_work() - */ - flush_work(&hdev->rx_work); - flush_work(&hdev->cmd_work); - - skb_queue_purge(&hdev->cmd_q); - skb_queue_purge(&hdev->rx_q); - - if (hdev->flush) - hdev->flush(hdev); - - if (hdev->sent_cmd) { - kfree_skb(hdev->sent_cmd); - hdev->sent_cmd = NULL; - } - - clear_bit(HCI_RUNNING, &hdev->flags); - hci_sock_dev_event(hdev, HCI_DEV_CLOSE); - - hdev->close(hdev); - hdev->flags &= BIT(HCI_RAW); - } - -done: - return ret; -} - static int hci_dev_do_open(struct hci_dev *hdev) { int ret = 0; @@ -1594,155 +542,6 @@ done: return err; } -/* This function requires the caller holds hdev->lock */ -static void hci_pend_le_actions_clear(struct hci_dev *hdev) -{ - struct hci_conn_params *p; - - list_for_each_entry(p, &hdev->le_conn_params, list) { - if (p->conn) { - hci_conn_drop(p->conn); - hci_conn_put(p->conn); - p->conn = NULL; - } - list_del_init(&p->action); - } - - BT_DBG("All LE pending actions cleared"); -} - -/* TODO: Move this function into hci_sync.c */ -int hci_dev_close_sync(struct hci_dev *hdev) -{ - bool auto_off; - int err = 0; - - BT_DBG("%s %p", hdev->name, hdev); - - cancel_delayed_work(&hdev->power_off); - cancel_delayed_work(&hdev->ncmd_timer); - - hci_request_cancel_all(hdev); - - if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && - !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && - test_bit(HCI_UP, &hdev->flags)) { - /* Execute vendor specific shutdown routine */ - if (hdev->shutdown) - err = hdev->shutdown(hdev); - } - - if (!test_and_clear_bit(HCI_UP, &hdev->flags)) { - cancel_delayed_work_sync(&hdev->cmd_timer); - return err; - } - - hci_leds_update_powered(hdev, false); - - /* Flush RX and TX works */ - flush_work(&hdev->tx_work); - flush_work(&hdev->rx_work); - - if (hdev->discov_timeout > 0) { - hdev->discov_timeout = 0; - hci_dev_clear_flag(hdev, HCI_DISCOVERABLE); - hci_dev_clear_flag(hdev, HCI_LIMITED_DISCOVERABLE); - } - - if (hci_dev_test_and_clear_flag(hdev, HCI_SERVICE_CACHE)) - cancel_delayed_work(&hdev->service_cache); - - if (hci_dev_test_flag(hdev, HCI_MGMT)) { - struct adv_info *adv_instance; - - cancel_delayed_work_sync(&hdev->rpa_expired); - - list_for_each_entry(adv_instance, &hdev->adv_instances, list) - cancel_delayed_work_sync(&adv_instance->rpa_expired_cb); - } - - /* Avoid potential lockdep warnings from the *_flush() calls by - * ensuring the workqueue is empty up front. - */ - drain_workqueue(hdev->workqueue); - - hci_dev_lock(hdev); - - hci_discovery_set_state(hdev, DISCOVERY_STOPPED); - - auto_off = hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF); - - if (!auto_off && hdev->dev_type == HCI_PRIMARY && - !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && - hci_dev_test_flag(hdev, HCI_MGMT)) - __mgmt_power_off(hdev); - - hci_inquiry_cache_flush(hdev); - hci_pend_le_actions_clear(hdev); - hci_conn_hash_flush(hdev); - hci_dev_unlock(hdev); - - smp_unregister(hdev); - - hci_sock_dev_event(hdev, HCI_DEV_DOWN); - - aosp_do_close(hdev); - msft_do_close(hdev); - - if (hdev->flush) - hdev->flush(hdev); - - /* Reset device */ - skb_queue_purge(&hdev->cmd_q); - atomic_set(&hdev->cmd_cnt, 1); - if (test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks) && - !auto_off && !hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { - set_bit(HCI_INIT, &hdev->flags); - __hci_req_sync(hdev, hci_reset_req, 0, HCI_CMD_TIMEOUT, NULL); - clear_bit(HCI_INIT, &hdev->flags); - } - - /* flush cmd work */ - flush_work(&hdev->cmd_work); - - /* Drop queues */ - skb_queue_purge(&hdev->rx_q); - skb_queue_purge(&hdev->cmd_q); - skb_queue_purge(&hdev->raw_q); - - /* Drop last sent command */ - if (hdev->sent_cmd) { - cancel_delayed_work_sync(&hdev->cmd_timer); - kfree_skb(hdev->sent_cmd); - hdev->sent_cmd = NULL; - } - - clear_bit(HCI_RUNNING, &hdev->flags); - hci_sock_dev_event(hdev, HCI_DEV_CLOSE); - - if (test_and_clear_bit(SUSPEND_POWERING_DOWN, hdev->suspend_tasks)) - wake_up(&hdev->suspend_wait_q); - - /* After this point our queues are empty - * and no tasks are scheduled. */ - hdev->close(hdev); - - /* Clear flags */ - hdev->flags &= BIT(HCI_RAW); - hci_dev_clear_volatile_flags(hdev); - - /* Controller radio is available but is currently powered down */ - hdev->amp_status = AMP_STATUS_POWERED_DOWN; - - memset(hdev->eir, 0, sizeof(hdev->eir)); - memset(hdev->dev_class, 0, sizeof(hdev->dev_class)); - bacpy(&hdev->random_addr, BDADDR_ANY); - hci_codec_list_clear(&hdev->local_codecs); - - hci_dev_put(hdev); - return err; -} - int hci_dev_do_close(struct hci_dev *hdev) { int err; @@ -1810,7 +609,7 @@ static int hci_dev_do_reset(struct hci_dev *hdev) atomic_set(&hdev->cmd_cnt, 1); hdev->acl_cnt = 0; hdev->sco_cnt = 0; hdev->le_cnt = 0; - ret = __hci_req_sync(hdev, hci_reset_req, 0, HCI_INIT_TIMEOUT, NULL); + ret = hci_reset_sync(hdev); hci_req_sync_unlock(hdev); return ret; diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c index 8b63b4e5c96a..4e0a7719b58d 100644 --- a/net/bluetooth/hci_sync.c +++ b/net/bluetooth/hci_sync.c @@ -5,13 +5,19 @@ * Copyright (C) 2021 Intel Corporation */ +#include + #include #include #include #include "hci_request.h" +#include "hci_debugfs.h" #include "smp.h" #include "eir.h" +#include "msft.h" +#include "aosp.h" +#include "leds.h" static void hci_cmd_sync_complete(struct hci_dev *hdev, u8 result, u16 opcode, struct sk_buff *skb) @@ -144,7 +150,7 @@ struct sk_buff *__hci_cmd_sync_sk(struct hci_dev *hdev, u16 opcode, u32 plen, struct sk_buff *skb; int err = 0; - bt_dev_dbg(hdev, ""); + bt_dev_dbg(hdev, "Opcode 0x%4x", opcode); hci_req_init(&req, hdev); @@ -2411,285 +2417,1931 @@ int hci_powered_update_sync(struct hci_dev *hdev) return 0; } -/* This function perform power on HCI command sequence as follows: +/** + * hci_dev_get_bd_addr_from_property - Get the Bluetooth Device Address + * (BD_ADDR) for a HCI device from + * a firmware node property. + * @hdev: The HCI device * - * If controller is already up (HCI_UP) performs hci_powered_update_sync - * sequence otherwise run hci_dev_open_sync which will follow with - * hci_powered_update_sync after the init sequence is completed. + * Search the firmware node for 'local-bd-address'. + * + * All-zero BD addresses are rejected, because those could be properties + * that exist in the firmware tables, but were not updated by the firmware. For + * example, the DTS could define 'local-bd-address', with zero BD addresses. */ -static int hci_power_on_sync(struct hci_dev *hdev) +static void hci_dev_get_bd_addr_from_property(struct hci_dev *hdev) { - int err; + struct fwnode_handle *fwnode = dev_fwnode(hdev->dev.parent); + bdaddr_t ba; + int ret; - if (test_bit(HCI_UP, &hdev->flags) && - hci_dev_test_flag(hdev, HCI_MGMT) && - hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF)) { - cancel_delayed_work(&hdev->power_off); - return hci_powered_update_sync(hdev); - } + ret = fwnode_property_read_u8_array(fwnode, "local-bd-address", + (u8 *)&ba, sizeof(ba)); + if (ret < 0 || !bacmp(&ba, BDADDR_ANY)) + return; - err = hci_dev_open_sync(hdev); - if (err < 0) - return err; + bacpy(&hdev->public_addr, &ba); +} - /* During the HCI setup phase, a few error conditions are - * ignored and they need to be checked now. If they are still - * valid, it is important to return the device back off. - */ - if (hci_dev_test_flag(hdev, HCI_RFKILLED) || - hci_dev_test_flag(hdev, HCI_UNCONFIGURED) || - (hdev->dev_type == HCI_PRIMARY && - !bacmp(&hdev->bdaddr, BDADDR_ANY) && - !bacmp(&hdev->static_addr, BDADDR_ANY))) { - hci_dev_clear_flag(hdev, HCI_AUTO_OFF); - hci_dev_close_sync(hdev); - } else if (hci_dev_test_flag(hdev, HCI_AUTO_OFF)) { - queue_delayed_work(hdev->req_workqueue, &hdev->power_off, - HCI_AUTO_OFF_TIMEOUT); - } +struct hci_init_stage { + int (*func)(struct hci_dev *hdev); +}; - if (hci_dev_test_and_clear_flag(hdev, HCI_SETUP)) { - /* For unconfigured devices, set the HCI_RAW flag - * so that userspace can easily identify them. - */ - if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) - set_bit(HCI_RAW, &hdev->flags); +/* Run init stage NULL terminated function table */ +static int hci_init_stage_sync(struct hci_dev *hdev, + const struct hci_init_stage *stage) +{ + size_t i; - /* For fully configured devices, this will send - * the Index Added event. For unconfigured devices, - * it will send Unconfigued Index Added event. - * - * Devices with HCI_QUIRK_RAW_DEVICE are ignored - * and no event will be send. - */ - mgmt_index_added(hdev); - } else if (hci_dev_test_and_clear_flag(hdev, HCI_CONFIG)) { - /* When the controller is now configured, then it - * is important to clear the HCI_RAW flag. - */ - if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) - clear_bit(HCI_RAW, &hdev->flags); + for (i = 0; stage[i].func; i++) { + int err; - /* Powering on the controller with HCI_CONFIG set only - * happens with the transition from unconfigured to - * configured. This will send the Index Added event. - */ - mgmt_index_added(hdev); + err = stage[i].func(hdev); + if (err) + return err; } return 0; } -static int hci_remote_name_cancel_sync(struct hci_dev *hdev, bdaddr_t *addr) +/* Read Local Version */ +static int hci_read_local_version_sync(struct hci_dev *hdev) { - struct hci_cp_remote_name_req_cancel cp; + return __hci_cmd_sync_status(hdev, HCI_OP_READ_LOCAL_VERSION, + 0, NULL, HCI_CMD_TIMEOUT); +} - memset(&cp, 0, sizeof(cp)); - bacpy(&cp.bdaddr, addr); +/* Read BD Address */ +static int hci_read_bd_addr_sync(struct hci_dev *hdev) +{ + return __hci_cmd_sync_status(hdev, HCI_OP_READ_BD_ADDR, + 0, NULL, HCI_CMD_TIMEOUT); +} - return __hci_cmd_sync_status(hdev, HCI_OP_REMOTE_NAME_REQ_CANCEL, - sizeof(cp), &cp, HCI_CMD_TIMEOUT); +#define HCI_INIT(_func) \ +{ \ + .func = _func, \ } -int hci_stop_discovery_sync(struct hci_dev *hdev) +static const struct hci_init_stage hci_init0[] = { + /* HCI_OP_READ_LOCAL_VERSION */ + HCI_INIT(hci_read_local_version_sync), + /* HCI_OP_READ_BD_ADDR */ + HCI_INIT(hci_read_bd_addr_sync), + {} +}; + +int hci_reset_sync(struct hci_dev *hdev) { - struct discovery_state *d = &hdev->discovery; - struct inquiry_entry *e; int err; - bt_dev_dbg(hdev, "state %u", hdev->discovery.state); + set_bit(HCI_RESET, &hdev->flags); - if (d->state == DISCOVERY_FINDING || d->state == DISCOVERY_STOPPING) { - if (test_bit(HCI_INQUIRY, &hdev->flags)) { - err = __hci_cmd_sync_status(hdev, HCI_OP_INQUIRY_CANCEL, - 0, NULL, HCI_CMD_TIMEOUT); - if (err) - return err; - } + err = __hci_cmd_sync_status(hdev, HCI_OP_RESET, 0, NULL, + HCI_CMD_TIMEOUT); + if (err) + return err; - if (hci_dev_test_flag(hdev, HCI_LE_SCAN)) { - cancel_delayed_work(&hdev->le_scan_disable); - cancel_delayed_work(&hdev->le_scan_restart); + return 0; +} - err = hci_scan_disable_sync(hdev); - if (err) - return err; - } +static int hci_init0_sync(struct hci_dev *hdev) +{ + int err; - } else { - err = hci_scan_disable_sync(hdev); + bt_dev_dbg(hdev, ""); + + /* Reset */ + if (!test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) { + err = hci_reset_sync(hdev); if (err) return err; } - /* Resume advertising if it was paused */ - if (use_ll_privacy(hdev)) - hci_resume_advertising_sync(hdev); + return hci_init_stage_sync(hdev, hci_init0); +} - /* No further actions needed for LE-only discovery */ - if (d->type == DISCOV_TYPE_LE) +static int hci_unconf_init_sync(struct hci_dev *hdev) +{ + int err; + + if (test_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks)) return 0; - if (d->state == DISCOVERY_RESOLVING || d->state == DISCOVERY_STOPPING) { - e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY, - NAME_PENDING); - if (!e) - return 0; + err = hci_init0_sync(hdev); + if (err < 0) + return err; - return hci_remote_name_cancel_sync(hdev, &e->data.bdaddr); - } + if (hci_dev_test_flag(hdev, HCI_SETUP)) + hci_debugfs_create_basic(hdev); return 0; } -static int hci_disconnect_phy_link_sync(struct hci_dev *hdev, u16 handle, - u8 reason) +/* Read Local Supported Features. */ +static int hci_read_local_features_sync(struct hci_dev *hdev) { - struct hci_cp_disconn_phy_link cp; - - memset(&cp, 0, sizeof(cp)); - cp.phy_handle = HCI_PHY_HANDLE(handle); - cp.reason = reason; + /* Not all AMP controllers support this command */ + if (hdev->dev_type == HCI_AMP && !(hdev->commands[14] & 0x20)) + return 0; - return __hci_cmd_sync_status(hdev, HCI_OP_DISCONN_PHY_LINK, - sizeof(cp), &cp, HCI_CMD_TIMEOUT); + return __hci_cmd_sync_status(hdev, HCI_OP_READ_LOCAL_FEATURES, + 0, NULL, HCI_CMD_TIMEOUT); } -static int hci_disconnect_sync(struct hci_dev *hdev, struct hci_conn *conn, - u8 reason) +/* BR Controller init stage 1 command sequence */ +static const struct hci_init_stage br_init1[] = { + /* HCI_OP_READ_LOCAL_FEATURES */ + HCI_INIT(hci_read_local_features_sync), + /* HCI_OP_READ_LOCAL_VERSION */ + HCI_INIT(hci_read_local_version_sync), + /* HCI_OP_READ_BD_ADDR */ + HCI_INIT(hci_read_bd_addr_sync), + {} +}; + +/* Read Local Commands */ +static int hci_read_local_cmds_sync(struct hci_dev *hdev) { - struct hci_cp_disconnect cp; - - if (conn->type == AMP_LINK) - return hci_disconnect_phy_link_sync(hdev, conn->handle, reason); - - memset(&cp, 0, sizeof(cp)); - cp.handle = cpu_to_le16(conn->handle); - cp.reason = reason; + /* All Bluetooth 1.2 and later controllers should support the + * HCI command for reading the local supported commands. + * + * Unfortunately some controllers indicate Bluetooth 1.2 support, + * but do not have support for this command. If that is the case, + * the driver can quirk the behavior and skip reading the local + * supported commands. + */ + if (hdev->hci_ver > BLUETOOTH_VER_1_1 && + !test_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks)) + return __hci_cmd_sync_status(hdev, HCI_OP_READ_LOCAL_COMMANDS, + 0, NULL, HCI_CMD_TIMEOUT); - return __hci_cmd_sync_status(hdev, HCI_OP_DISCONNECT, - sizeof(cp), &cp, HCI_CMD_TIMEOUT); + return 0; } -static int hci_le_connect_cancel_sync(struct hci_dev *hdev, - struct hci_conn *conn) +/* Read Local AMP Info */ +static int hci_read_local_amp_info_sync(struct hci_dev *hdev) { - if (test_bit(HCI_CONN_SCANNING, &conn->flags)) - return 0; - - return __hci_cmd_sync_status(hdev, HCI_OP_LE_CREATE_CONN_CANCEL, - 6, &conn->dst, HCI_CMD_TIMEOUT); + return __hci_cmd_sync_status(hdev, HCI_OP_READ_LOCAL_AMP_INFO, + 0, NULL, HCI_CMD_TIMEOUT); } -static int hci_connect_cancel_sync(struct hci_dev *hdev, struct hci_conn *conn) +/* Read Data Blk size */ +static int hci_read_data_block_size_sync(struct hci_dev *hdev) { - if (conn->type == LE_LINK) - return hci_le_connect_cancel_sync(hdev, conn); + return __hci_cmd_sync_status(hdev, HCI_OP_READ_DATA_BLOCK_SIZE, + 0, NULL, HCI_CMD_TIMEOUT); +} - if (hdev->hci_ver < BLUETOOTH_VER_1_2) - return 0; +/* Read Flow Control Mode */ +static int hci_read_flow_control_mode_sync(struct hci_dev *hdev) +{ + return __hci_cmd_sync_status(hdev, HCI_OP_READ_FLOW_CONTROL_MODE, + 0, NULL, HCI_CMD_TIMEOUT); +} - return __hci_cmd_sync_status(hdev, HCI_OP_CREATE_CONN_CANCEL, - 6, &conn->dst, HCI_CMD_TIMEOUT); +/* Read Location Data */ +static int hci_read_location_data_sync(struct hci_dev *hdev) +{ + return __hci_cmd_sync_status(hdev, HCI_OP_READ_LOCATION_DATA, + 0, NULL, HCI_CMD_TIMEOUT); } -static int hci_reject_sco_sync(struct hci_dev *hdev, struct hci_conn *conn, - u8 reason) +/* AMP Controller init stage 1 command sequence */ +static const struct hci_init_stage amp_init1[] = { + /* HCI_OP_READ_LOCAL_VERSION */ + HCI_INIT(hci_read_local_version_sync), + /* HCI_OP_READ_LOCAL_COMMANDS */ + HCI_INIT(hci_read_local_cmds_sync), + /* HCI_OP_READ_LOCAL_AMP_INFO */ + HCI_INIT(hci_read_local_amp_info_sync), + /* HCI_OP_READ_DATA_BLOCK_SIZE */ + HCI_INIT(hci_read_data_block_size_sync), + /* HCI_OP_READ_FLOW_CONTROL_MODE */ + HCI_INIT(hci_read_flow_control_mode_sync), + /* HCI_OP_READ_LOCATION_DATA */ + HCI_INIT(hci_read_location_data_sync), +}; + +static int hci_init1_sync(struct hci_dev *hdev) { - struct hci_cp_reject_sync_conn_req cp; + int err; - memset(&cp, 0, sizeof(cp)); - bacpy(&cp.bdaddr, &conn->dst); - cp.reason = reason; + bt_dev_dbg(hdev, ""); - /* SCO rejection has its own limited set of - * allowed error values (0x0D-0x0F). - */ - if (reason < 0x0d || reason > 0x0f) - cp.reason = HCI_ERROR_REJ_LIMITED_RESOURCES; + /* Reset */ + if (!test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) { + err = hci_reset_sync(hdev); + if (err) + return err; + } - return __hci_cmd_sync_status(hdev, HCI_OP_REJECT_SYNC_CONN_REQ, - sizeof(cp), &cp, HCI_CMD_TIMEOUT); + switch (hdev->dev_type) { + case HCI_PRIMARY: + hdev->flow_ctl_mode = HCI_FLOW_CTL_MODE_PACKET_BASED; + return hci_init_stage_sync(hdev, br_init1); + case HCI_AMP: + hdev->flow_ctl_mode = HCI_FLOW_CTL_MODE_BLOCK_BASED; + return hci_init_stage_sync(hdev, amp_init1); + default: + bt_dev_err(hdev, "Unknown device type %d", hdev->dev_type); + break; + } + + return 0; } -static int hci_reject_conn_sync(struct hci_dev *hdev, struct hci_conn *conn, - u8 reason) +/* AMP Controller init stage 2 command sequence */ +static const struct hci_init_stage amp_init2[] = { + /* HCI_OP_READ_LOCAL_FEATURES */ + HCI_INIT(hci_read_local_features_sync), +}; + +/* Read Buffer Size (ACL mtu, max pkt, etc.) */ +static int hci_read_buffer_size_sync(struct hci_dev *hdev) { - struct hci_cp_reject_conn_req cp; + return __hci_cmd_sync_status(hdev, HCI_OP_READ_BUFFER_SIZE, + 0, NULL, HCI_CMD_TIMEOUT); +} - if (conn->type == SCO_LINK || conn->type == ESCO_LINK) - return hci_reject_sco_sync(hdev, conn, reason); +/* Read Class of Device */ +static int hci_read_dev_class_sync(struct hci_dev *hdev) +{ + return __hci_cmd_sync_status(hdev, HCI_OP_READ_CLASS_OF_DEV, + 0, NULL, HCI_CMD_TIMEOUT); +} - memset(&cp, 0, sizeof(cp)); - bacpy(&cp.bdaddr, &conn->dst); - cp.reason = reason; +/* Read Local Name */ +static int hci_read_local_name_sync(struct hci_dev *hdev) +{ + return __hci_cmd_sync_status(hdev, HCI_OP_READ_LOCAL_NAME, + 0, NULL, HCI_CMD_TIMEOUT); +} - return __hci_cmd_sync_status(hdev, HCI_OP_REJECT_CONN_REQ, - sizeof(cp), &cp, HCI_CMD_TIMEOUT); +/* Read Voice Setting */ +static int hci_read_voice_setting_sync(struct hci_dev *hdev) +{ + return __hci_cmd_sync_status(hdev, HCI_OP_READ_VOICE_SETTING, + 0, NULL, HCI_CMD_TIMEOUT); } -static int hci_abort_conn_sync(struct hci_dev *hdev, struct hci_conn *conn, - u8 reason) +/* Read Number of Supported IAC */ +static int hci_read_num_supported_iac_sync(struct hci_dev *hdev) { - switch (conn->state) { - case BT_CONNECTED: - case BT_CONFIG: - return hci_disconnect_sync(hdev, conn, reason); - case BT_CONNECT: - return hci_connect_cancel_sync(hdev, conn); - case BT_CONNECT2: - return hci_reject_conn_sync(hdev, conn, reason); - default: - conn->state = BT_CLOSED; - break; - } + return __hci_cmd_sync_status(hdev, HCI_OP_READ_NUM_SUPPORTED_IAC, + 0, NULL, HCI_CMD_TIMEOUT); +} - return 0; +/* Read Current IAC LAP */ +static int hci_read_current_iac_lap_sync(struct hci_dev *hdev) +{ + return __hci_cmd_sync_status(hdev, HCI_OP_READ_CURRENT_IAC_LAP, + 0, NULL, HCI_CMD_TIMEOUT); } -/* This function perform power off HCI command sequence as follows: - * - * Clear Advertising - * Stop Discovery - * Disconnect all connections - * hci_dev_close_sync - */ -static int hci_power_off_sync(struct hci_dev *hdev) +static int hci_set_event_filter_sync(struct hci_dev *hdev, u8 flt_type, + u8 cond_type, bdaddr_t *bdaddr, + u8 auto_accept) { - struct hci_conn *conn; - int err; + struct hci_cp_set_event_filter cp; - /* If controller is already down there is nothing to do */ - if (!test_bit(HCI_UP, &hdev->flags)) + if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) return 0; - if (test_bit(HCI_ISCAN, &hdev->flags) || - test_bit(HCI_PSCAN, &hdev->flags)) { - err = hci_write_scan_enable_sync(hdev, 0x00); - if (err) - return err; - } - - err = hci_clear_adv_sync(hdev, NULL, false); - if (err) - return err; - - err = hci_stop_discovery_sync(hdev); - if (err) - return err; + memset(&cp, 0, sizeof(cp)); + cp.flt_type = flt_type; - list_for_each_entry(conn, &hdev->conn_hash.list, list) { - /* 0x15 == Terminated due to Power Off */ - hci_abort_conn_sync(hdev, conn, 0x15); + if (flt_type != HCI_FLT_CLEAR_ALL) { + cp.cond_type = cond_type; + bacpy(&cp.addr_conn_flt.bdaddr, bdaddr); + cp.addr_conn_flt.auto_accept = auto_accept; } - return hci_dev_close_sync(hdev); + return __hci_cmd_sync_status(hdev, HCI_OP_SET_EVENT_FLT, + flt_type == HCI_FLT_CLEAR_ALL ? + sizeof(cp.flt_type) : sizeof(cp), &cp, + HCI_CMD_TIMEOUT); } -int hci_set_powered_sync(struct hci_dev *hdev, u8 val) +static int hci_clear_event_filter_sync(struct hci_dev *hdev) { - if (val) - return hci_power_on_sync(hdev); + if (!hci_dev_test_flag(hdev, HCI_EVENT_FILTER_CONFIGURED)) + return 0; + + return hci_set_event_filter_sync(hdev, HCI_FLT_CLEAR_ALL, 0x00, + BDADDR_ANY, 0x00); +} + +/* Connection accept timeout ~20 secs */ +static int hci_write_ca_timeout_sync(struct hci_dev *hdev) +{ + __le16 param = cpu_to_le16(0x7d00); + + return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_CA_TIMEOUT, + sizeof(param), ¶m, HCI_CMD_TIMEOUT); +} + +/* BR Controller init stage 2 command sequence */ +static const struct hci_init_stage br_init2[] = { + /* HCI_OP_READ_BUFFER_SIZE */ + HCI_INIT(hci_read_buffer_size_sync), + /* HCI_OP_READ_CLASS_OF_DEV */ + HCI_INIT(hci_read_dev_class_sync), + /* HCI_OP_READ_LOCAL_NAME */ + HCI_INIT(hci_read_local_name_sync), + /* HCI_OP_READ_VOICE_SETTING */ + HCI_INIT(hci_read_voice_setting_sync), + /* HCI_OP_READ_NUM_SUPPORTED_IAC */ + HCI_INIT(hci_read_num_supported_iac_sync), + /* HCI_OP_READ_CURRENT_IAC_LAP */ + HCI_INIT(hci_read_current_iac_lap_sync), + /* HCI_OP_SET_EVENT_FLT */ + HCI_INIT(hci_clear_event_filter_sync), + /* HCI_OP_WRITE_CA_TIMEOUT */ + HCI_INIT(hci_write_ca_timeout_sync), + {} +}; + +static int hci_write_ssp_mode_1_sync(struct hci_dev *hdev) +{ + u8 mode = 0x01; + + if (!lmp_ssp_capable(hdev) || !hci_dev_test_flag(hdev, HCI_SSP_ENABLED)) + return 0; + + /* When SSP is available, then the host features page + * should also be available as well. However some + * controllers list the max_page as 0 as long as SSP + * has not been enabled. To achieve proper debugging + * output, force the minimum max_page to 1 at least. + */ + hdev->max_page = 0x01; + + return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_SSP_MODE, + sizeof(mode), &mode, HCI_CMD_TIMEOUT); +} + +static int hci_write_eir_sync(struct hci_dev *hdev) +{ + struct hci_cp_write_eir cp; + + if (!lmp_ssp_capable(hdev) || hci_dev_test_flag(hdev, HCI_SSP_ENABLED)) + return 0; + + memset(hdev->eir, 0, sizeof(hdev->eir)); + memset(&cp, 0, sizeof(cp)); + + return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_EIR, sizeof(cp), &cp, + HCI_CMD_TIMEOUT); +} + +static int hci_write_inquiry_mode_sync(struct hci_dev *hdev) +{ + u8 mode; + + if (!lmp_inq_rssi_capable(hdev) && + !test_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks)) + return 0; + + /* If Extended Inquiry Result events are supported, then + * they are clearly preferred over Inquiry Result with RSSI + * events. + */ + mode = lmp_ext_inq_capable(hdev) ? 0x02 : 0x01; + + return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_INQUIRY_MODE, + sizeof(mode), &mode, HCI_CMD_TIMEOUT); +} + +static int hci_read_inq_rsp_tx_power_sync(struct hci_dev *hdev) +{ + if (!lmp_inq_tx_pwr_capable(hdev)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_READ_INQ_RSP_TX_POWER, + 0, NULL, HCI_CMD_TIMEOUT); +} + +static int hci_read_local_ext_features_sync(struct hci_dev *hdev, u8 page) +{ + struct hci_cp_read_local_ext_features cp; + + if (!lmp_ext_feat_capable(hdev)) + return 0; + + memset(&cp, 0, sizeof(cp)); + cp.page = page; + + return __hci_cmd_sync_status(hdev, HCI_OP_READ_LOCAL_EXT_FEATURES, + sizeof(cp), &cp, HCI_CMD_TIMEOUT); +} + +static int hci_read_local_ext_features_1_sync(struct hci_dev *hdev) +{ + return hci_read_local_ext_features_sync(hdev, 0x01); +} + +/* HCI Controller init stage 2 command sequence */ +static const struct hci_init_stage hci_init2[] = { + /* HCI_OP_READ_LOCAL_COMMANDS */ + HCI_INIT(hci_read_local_cmds_sync), + /* HCI_OP_WRITE_SSP_MODE */ + HCI_INIT(hci_write_ssp_mode_1_sync), + /* HCI_OP_WRITE_EIR */ + HCI_INIT(hci_write_eir_sync), + /* HCI_OP_WRITE_INQUIRY_MODE */ + HCI_INIT(hci_write_inquiry_mode_sync), + /* HCI_OP_READ_INQ_RSP_TX_POWER */ + HCI_INIT(hci_read_inq_rsp_tx_power_sync), + /* HCI_OP_READ_LOCAL_EXT_FEATURES */ + HCI_INIT(hci_read_local_ext_features_1_sync), + /* HCI_OP_WRITE_AUTH_ENABLE */ + HCI_INIT(hci_write_auth_enable_sync), + {} +}; + +/* Read LE Buffer Size */ +static int hci_le_read_buffer_size_sync(struct hci_dev *hdev) +{ + return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_BUFFER_SIZE, + 0, NULL, HCI_CMD_TIMEOUT); +} + +/* Read LE Local Supported Features */ +static int hci_le_read_local_features_sync(struct hci_dev *hdev) +{ + return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_LOCAL_FEATURES, + 0, NULL, HCI_CMD_TIMEOUT); +} + +/* Read LE Supported States */ +static int hci_le_read_supported_states_sync(struct hci_dev *hdev) +{ + return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_SUPPORTED_STATES, + 0, NULL, HCI_CMD_TIMEOUT); +} + +/* LE Controller init stage 2 command sequence */ +static const struct hci_init_stage le_init2[] = { + /* HCI_OP_LE_READ_BUFFER_SIZE */ + HCI_INIT(hci_le_read_buffer_size_sync), + /* HCI_OP_LE_READ_LOCAL_FEATURES */ + HCI_INIT(hci_le_read_local_features_sync), + /* HCI_OP_LE_READ_SUPPORTED_STATES */ + HCI_INIT(hci_le_read_supported_states_sync), + {} +}; + +static int hci_init2_sync(struct hci_dev *hdev) +{ + int err; + + bt_dev_dbg(hdev, ""); + + if (hdev->dev_type == HCI_AMP) + return hci_init_stage_sync(hdev, amp_init2); + + if (lmp_bredr_capable(hdev)) { + err = hci_init_stage_sync(hdev, br_init2); + if (err) + return err; + } else { + hci_dev_clear_flag(hdev, HCI_BREDR_ENABLED); + } + + if (lmp_le_capable(hdev)) { + err = hci_init_stage_sync(hdev, le_init2); + if (err) + return err; + /* LE-only controllers have LE implicitly enabled */ + if (!lmp_bredr_capable(hdev)) + hci_dev_set_flag(hdev, HCI_LE_ENABLED); + } + + return hci_init_stage_sync(hdev, hci_init2); +} + +static int hci_set_event_mask_sync(struct hci_dev *hdev) +{ + /* The second byte is 0xff instead of 0x9f (two reserved bits + * disabled) since a Broadcom 1.2 dongle doesn't respond to the + * command otherwise. + */ + u8 events[8] = { 0xff, 0xff, 0xfb, 0xff, 0x00, 0x00, 0x00, 0x00 }; + + /* CSR 1.1 dongles does not accept any bitfield so don't try to set + * any event mask for pre 1.2 devices. + */ + if (hdev->hci_ver < BLUETOOTH_VER_1_2) + return 0; + + if (lmp_bredr_capable(hdev)) { + events[4] |= 0x01; /* Flow Specification Complete */ + } else { + /* Use a different default for LE-only devices */ + memset(events, 0, sizeof(events)); + events[1] |= 0x20; /* Command Complete */ + events[1] |= 0x40; /* Command Status */ + events[1] |= 0x80; /* Hardware Error */ + + /* If the controller supports the Disconnect command, enable + * the corresponding event. In addition enable packet flow + * control related events. + */ + if (hdev->commands[0] & 0x20) { + events[0] |= 0x10; /* Disconnection Complete */ + events[2] |= 0x04; /* Number of Completed Packets */ + events[3] |= 0x02; /* Data Buffer Overflow */ + } + + /* If the controller supports the Read Remote Version + * Information command, enable the corresponding event. + */ + if (hdev->commands[2] & 0x80) + events[1] |= 0x08; /* Read Remote Version Information + * Complete + */ + + if (hdev->le_features[0] & HCI_LE_ENCRYPTION) { + events[0] |= 0x80; /* Encryption Change */ + events[5] |= 0x80; /* Encryption Key Refresh Complete */ + } + } + + if (lmp_inq_rssi_capable(hdev) || + test_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks)) + events[4] |= 0x02; /* Inquiry Result with RSSI */ + + if (lmp_ext_feat_capable(hdev)) + events[4] |= 0x04; /* Read Remote Extended Features Complete */ + + if (lmp_esco_capable(hdev)) { + events[5] |= 0x08; /* Synchronous Connection Complete */ + events[5] |= 0x10; /* Synchronous Connection Changed */ + } + + if (lmp_sniffsubr_capable(hdev)) + events[5] |= 0x20; /* Sniff Subrating */ + + if (lmp_pause_enc_capable(hdev)) + events[5] |= 0x80; /* Encryption Key Refresh Complete */ + + if (lmp_ext_inq_capable(hdev)) + events[5] |= 0x40; /* Extended Inquiry Result */ + + if (lmp_no_flush_capable(hdev)) + events[7] |= 0x01; /* Enhanced Flush Complete */ + + if (lmp_lsto_capable(hdev)) + events[6] |= 0x80; /* Link Supervision Timeout Changed */ + + if (lmp_ssp_capable(hdev)) { + events[6] |= 0x01; /* IO Capability Request */ + events[6] |= 0x02; /* IO Capability Response */ + events[6] |= 0x04; /* User Confirmation Request */ + events[6] |= 0x08; /* User Passkey Request */ + events[6] |= 0x10; /* Remote OOB Data Request */ + events[6] |= 0x20; /* Simple Pairing Complete */ + events[7] |= 0x04; /* User Passkey Notification */ + events[7] |= 0x08; /* Keypress Notification */ + events[7] |= 0x10; /* Remote Host Supported + * Features Notification + */ + } + + if (lmp_le_capable(hdev)) + events[7] |= 0x20; /* LE Meta-Event */ + + return __hci_cmd_sync_status(hdev, HCI_OP_SET_EVENT_MASK, + sizeof(events), events, HCI_CMD_TIMEOUT); +} + +static int hci_read_stored_link_key_sync(struct hci_dev *hdev) +{ + struct hci_cp_read_stored_link_key cp; + + if (!(hdev->commands[6] & 0x20) || + test_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks)) + return 0; + + memset(&cp, 0, sizeof(cp)); + bacpy(&cp.bdaddr, BDADDR_ANY); + cp.read_all = 0x01; + + return __hci_cmd_sync_status(hdev, HCI_OP_READ_STORED_LINK_KEY, + sizeof(cp), &cp, HCI_CMD_TIMEOUT); +} + +static int hci_setup_link_policy_sync(struct hci_dev *hdev) +{ + struct hci_cp_write_def_link_policy cp; + u16 link_policy = 0; + + if (!(hdev->commands[5] & 0x10)) + return 0; + + memset(&cp, 0, sizeof(cp)); + + if (lmp_rswitch_capable(hdev)) + link_policy |= HCI_LP_RSWITCH; + if (lmp_hold_capable(hdev)) + link_policy |= HCI_LP_HOLD; + if (lmp_sniff_capable(hdev)) + link_policy |= HCI_LP_SNIFF; + if (lmp_park_capable(hdev)) + link_policy |= HCI_LP_PARK; + + cp.policy = cpu_to_le16(link_policy); + + return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_DEF_LINK_POLICY, + sizeof(cp), &cp, HCI_CMD_TIMEOUT); +} + +static int hci_read_page_scan_activity_sync(struct hci_dev *hdev) +{ + if (!(hdev->commands[8] & 0x01)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_READ_PAGE_SCAN_ACTIVITY, + 0, NULL, HCI_CMD_TIMEOUT); +} + +static int hci_read_def_err_data_reporting_sync(struct hci_dev *hdev) +{ + if (!(hdev->commands[18] & 0x04) || + test_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_READ_DEF_ERR_DATA_REPORTING, + 0, NULL, HCI_CMD_TIMEOUT); +} + +static int hci_read_page_scan_type_sync(struct hci_dev *hdev) +{ + /* Some older Broadcom based Bluetooth 1.2 controllers do not + * support the Read Page Scan Type command. Check support for + * this command in the bit mask of supported commands. + */ + if (!(hdev->commands[13] & 0x01)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_READ_PAGE_SCAN_TYPE, + 0, NULL, HCI_CMD_TIMEOUT); +} + +/* Read features beyond page 1 if available */ +static int hci_read_local_ext_features_all_sync(struct hci_dev *hdev) +{ + u8 page; + int err; + + if (!lmp_ext_feat_capable(hdev)) + return 0; + + for (page = 2; page < HCI_MAX_PAGES && page <= hdev->max_page; + page++) { + err = hci_read_local_ext_features_sync(hdev, page); + if (err) + return err; + } + + return 0; +} + +/* HCI Controller init stage 3 command sequence */ +static const struct hci_init_stage hci_init3[] = { + /* HCI_OP_SET_EVENT_MASK */ + HCI_INIT(hci_set_event_mask_sync), + /* HCI_OP_READ_STORED_LINK_KEY */ + HCI_INIT(hci_read_stored_link_key_sync), + /* HCI_OP_WRITE_DEF_LINK_POLICY */ + HCI_INIT(hci_setup_link_policy_sync), + /* HCI_OP_READ_PAGE_SCAN_ACTIVITY */ + HCI_INIT(hci_read_page_scan_activity_sync), + /* HCI_OP_READ_DEF_ERR_DATA_REPORTING */ + HCI_INIT(hci_read_def_err_data_reporting_sync), + /* HCI_OP_READ_PAGE_SCAN_TYPE */ + HCI_INIT(hci_read_page_scan_type_sync), + /* HCI_OP_READ_LOCAL_EXT_FEATURES */ + HCI_INIT(hci_read_local_ext_features_all_sync), + {} +}; + +static int hci_le_set_event_mask_sync(struct hci_dev *hdev) +{ + u8 events[8]; + + if (!lmp_le_capable(hdev)) + return 0; + + memset(events, 0, sizeof(events)); + + if (hdev->le_features[0] & HCI_LE_ENCRYPTION) + events[0] |= 0x10; /* LE Long Term Key Request */ + + /* If controller supports the Connection Parameters Request + * Link Layer Procedure, enable the corresponding event. + */ + if (hdev->le_features[0] & HCI_LE_CONN_PARAM_REQ_PROC) + /* LE Remote Connection Parameter Request */ + events[0] |= 0x20; + + /* If the controller supports the Data Length Extension + * feature, enable the corresponding event. + */ + if (hdev->le_features[0] & HCI_LE_DATA_LEN_EXT) + events[0] |= 0x40; /* LE Data Length Change */ + + /* If the controller supports LL Privacy feature, enable + * the corresponding event. + */ + if (hdev->le_features[0] & HCI_LE_LL_PRIVACY) + events[1] |= 0x02; /* LE Enhanced Connection Complete */ + + /* If the controller supports Extended Scanner Filter + * Policies, enable the corresponding event. + */ + if (hdev->le_features[0] & HCI_LE_EXT_SCAN_POLICY) + events[1] |= 0x04; /* LE Direct Advertising Report */ + + /* If the controller supports Channel Selection Algorithm #2 + * feature, enable the corresponding event. + */ + if (hdev->le_features[1] & HCI_LE_CHAN_SEL_ALG2) + events[2] |= 0x08; /* LE Channel Selection Algorithm */ + + /* If the controller supports the LE Set Scan Enable command, + * enable the corresponding advertising report event. + */ + if (hdev->commands[26] & 0x08) + events[0] |= 0x02; /* LE Advertising Report */ + + /* If the controller supports the LE Create Connection + * command, enable the corresponding event. + */ + if (hdev->commands[26] & 0x10) + events[0] |= 0x01; /* LE Connection Complete */ + + /* If the controller supports the LE Connection Update + * command, enable the corresponding event. + */ + if (hdev->commands[27] & 0x04) + events[0] |= 0x04; /* LE Connection Update Complete */ + + /* If the controller supports the LE Read Remote Used Features + * command, enable the corresponding event. + */ + if (hdev->commands[27] & 0x20) + /* LE Read Remote Used Features Complete */ + events[0] |= 0x08; + + /* If the controller supports the LE Read Local P-256 + * Public Key command, enable the corresponding event. + */ + if (hdev->commands[34] & 0x02) + /* LE Read Local P-256 Public Key Complete */ + events[0] |= 0x80; + + /* If the controller supports the LE Generate DHKey + * command, enable the corresponding event. + */ + if (hdev->commands[34] & 0x04) + events[1] |= 0x01; /* LE Generate DHKey Complete */ + + /* If the controller supports the LE Set Default PHY or + * LE Set PHY commands, enable the corresponding event. + */ + if (hdev->commands[35] & (0x20 | 0x40)) + events[1] |= 0x08; /* LE PHY Update Complete */ + + /* If the controller supports LE Set Extended Scan Parameters + * and LE Set Extended Scan Enable commands, enable the + * corresponding event. + */ + if (use_ext_scan(hdev)) + events[1] |= 0x10; /* LE Extended Advertising Report */ + + /* If the controller supports the LE Extended Advertising + * command, enable the corresponding event. + */ + if (ext_adv_capable(hdev)) + events[2] |= 0x02; /* LE Advertising Set Terminated */ + + return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EVENT_MASK, + sizeof(events), events, HCI_CMD_TIMEOUT); +} + +/* Read LE Advertising Channel TX Power */ +static int hci_le_read_adv_tx_power_sync(struct hci_dev *hdev) +{ + if ((hdev->commands[25] & 0x40) && !ext_adv_capable(hdev)) { + /* HCI TS spec forbids mixing of legacy and extended + * advertising commands wherein READ_ADV_TX_POWER is + * also included. So do not call it if extended adv + * is supported otherwise controller will return + * COMMAND_DISALLOWED for extended commands. + */ + return __hci_cmd_sync_status(hdev, + HCI_OP_LE_READ_ADV_TX_POWER, + 0, NULL, HCI_CMD_TIMEOUT); + } + + return 0; +} + +/* Read LE Min/Max Tx Power*/ +static int hci_le_read_tx_power_sync(struct hci_dev *hdev) +{ + if (!(hdev->commands[38] & 0x80)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_TRANSMIT_POWER, + 0, NULL, HCI_CMD_TIMEOUT); +} + +/* Read LE Accept List Size */ +static int hci_le_read_accept_list_size_sync(struct hci_dev *hdev) +{ + if (!(hdev->commands[26] & 0x40)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_ACCEPT_LIST_SIZE, + 0, NULL, HCI_CMD_TIMEOUT); +} + +/* Clear LE Accept List */ +static int hci_le_clear_accept_list_sync(struct hci_dev *hdev) +{ + if (!(hdev->commands[26] & 0x80)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_LE_CLEAR_ACCEPT_LIST, 0, NULL, + HCI_CMD_TIMEOUT); +} + +/* Read LE Resolving List Size */ +static int hci_le_read_resolv_list_size_sync(struct hci_dev *hdev) +{ + if (!(hdev->commands[34] & 0x40)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_RESOLV_LIST_SIZE, + 0, NULL, HCI_CMD_TIMEOUT); +} + +/* Clear LE Resolving List */ +static int hci_le_clear_resolv_list_sync(struct hci_dev *hdev) +{ + if (!(hdev->commands[34] & 0x20)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_LE_CLEAR_RESOLV_LIST, 0, NULL, + HCI_CMD_TIMEOUT); +} + +/* Set RPA timeout */ +static int hci_le_set_rpa_timeout_sync(struct hci_dev *hdev) +{ + __le16 timeout = cpu_to_le16(hdev->rpa_timeout); + + if (!(hdev->commands[35] & 0x04)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_RPA_TIMEOUT, + sizeof(timeout), &timeout, + HCI_CMD_TIMEOUT); +} + +/* Read LE Maximum Data Length */ +static int hci_le_read_max_data_len_sync(struct hci_dev *hdev) +{ + if (!(hdev->le_features[0] & HCI_LE_DATA_LEN_EXT)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_MAX_DATA_LEN, 0, NULL, + HCI_CMD_TIMEOUT); +} + +/* Read LE Suggested Default Data Length */ +static int hci_le_read_def_data_len_sync(struct hci_dev *hdev) +{ + if (!(hdev->le_features[0] & HCI_LE_DATA_LEN_EXT)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_DEF_DATA_LEN, 0, NULL, + HCI_CMD_TIMEOUT); +} + +/* Read LE Number of Supported Advertising Sets */ +static int hci_le_read_num_support_adv_sets_sync(struct hci_dev *hdev) +{ + if (!ext_adv_capable(hdev)) + return 0; + + return __hci_cmd_sync_status(hdev, + HCI_OP_LE_READ_NUM_SUPPORTED_ADV_SETS, + 0, NULL, HCI_CMD_TIMEOUT); +} + +/* Write LE Host Supported */ +static int hci_set_le_support_sync(struct hci_dev *hdev) +{ + struct hci_cp_write_le_host_supported cp; + + /* LE-only devices do not support explicit enablement */ + if (!lmp_bredr_capable(hdev)) + return 0; + + memset(&cp, 0, sizeof(cp)); + + if (hci_dev_test_flag(hdev, HCI_LE_ENABLED)) { + cp.le = 0x01; + cp.simul = 0x00; + } + + if (cp.le == lmp_host_le_capable(hdev)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_LE_HOST_SUPPORTED, + sizeof(cp), &cp, HCI_CMD_TIMEOUT); +} + +/* LE Controller init stage 3 command sequence */ +static const struct hci_init_stage le_init3[] = { + /* HCI_OP_LE_SET_EVENT_MASK */ + HCI_INIT(hci_le_set_event_mask_sync), + /* HCI_OP_LE_READ_ADV_TX_POWER */ + HCI_INIT(hci_le_read_adv_tx_power_sync), + /* HCI_OP_LE_READ_TRANSMIT_POWER */ + HCI_INIT(hci_le_read_tx_power_sync), + /* HCI_OP_LE_READ_ACCEPT_LIST_SIZE */ + HCI_INIT(hci_le_read_accept_list_size_sync), + /* HCI_OP_LE_CLEAR_ACCEPT_LIST */ + HCI_INIT(hci_le_clear_accept_list_sync), + /* HCI_OP_LE_READ_RESOLV_LIST_SIZE */ + HCI_INIT(hci_le_read_resolv_list_size_sync), + /* HCI_OP_LE_CLEAR_RESOLV_LIST */ + HCI_INIT(hci_le_clear_resolv_list_sync), + /* HCI_OP_LE_SET_RPA_TIMEOUT */ + HCI_INIT(hci_le_set_rpa_timeout_sync), + /* HCI_OP_LE_READ_MAX_DATA_LEN */ + HCI_INIT(hci_le_read_max_data_len_sync), + /* HCI_OP_LE_READ_DEF_DATA_LEN */ + HCI_INIT(hci_le_read_def_data_len_sync), + /* HCI_OP_LE_READ_NUM_SUPPORTED_ADV_SETS */ + HCI_INIT(hci_le_read_num_support_adv_sets_sync), + /* HCI_OP_WRITE_LE_HOST_SUPPORTED */ + HCI_INIT(hci_set_le_support_sync), + {} +}; + +static int hci_init3_sync(struct hci_dev *hdev) +{ + int err; + + bt_dev_dbg(hdev, ""); + + err = hci_init_stage_sync(hdev, hci_init3); + if (err) + return err; + + if (lmp_le_capable(hdev)) + return hci_init_stage_sync(hdev, le_init3); + + return 0; +} + +static int hci_delete_stored_link_key_sync(struct hci_dev *hdev) +{ + struct hci_cp_delete_stored_link_key cp; + + /* Some Broadcom based Bluetooth controllers do not support the + * Delete Stored Link Key command. They are clearly indicating its + * absence in the bit mask of supported commands. + * + * Check the supported commands and only if the command is marked + * as supported send it. If not supported assume that the controller + * does not have actual support for stored link keys which makes this + * command redundant anyway. + * + * Some controllers indicate that they support handling deleting + * stored link keys, but they don't. The quirk lets a driver + * just disable this command. + */ + if (!(hdev->commands[6] & 0x80) || + test_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks)) + return 0; + + memset(&cp, 0, sizeof(cp)); + bacpy(&cp.bdaddr, BDADDR_ANY); + cp.delete_all = 0x01; + + return __hci_cmd_sync_status(hdev, HCI_OP_DELETE_STORED_LINK_KEY, + sizeof(cp), &cp, HCI_CMD_TIMEOUT); +} + +static int hci_set_event_mask_page_2_sync(struct hci_dev *hdev) +{ + u8 events[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + bool changed = false; + + /* Set event mask page 2 if the HCI command for it is supported */ + if (!(hdev->commands[22] & 0x04)) + return 0; + + /* If Connectionless Peripheral Broadcast central role is supported + * enable all necessary events for it. + */ + if (lmp_cpb_central_capable(hdev)) { + events[1] |= 0x40; /* Triggered Clock Capture */ + events[1] |= 0x80; /* Synchronization Train Complete */ + events[2] |= 0x10; /* Peripheral Page Response Timeout */ + events[2] |= 0x20; /* CPB Channel Map Change */ + changed = true; + } + + /* If Connectionless Peripheral Broadcast peripheral role is supported + * enable all necessary events for it. + */ + if (lmp_cpb_peripheral_capable(hdev)) { + events[2] |= 0x01; /* Synchronization Train Received */ + events[2] |= 0x02; /* CPB Receive */ + events[2] |= 0x04; /* CPB Timeout */ + events[2] |= 0x08; /* Truncated Page Complete */ + changed = true; + } + + /* Enable Authenticated Payload Timeout Expired event if supported */ + if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) { + events[2] |= 0x80; + changed = true; + } + + /* Some Broadcom based controllers indicate support for Set Event + * Mask Page 2 command, but then actually do not support it. Since + * the default value is all bits set to zero, the command is only + * required if the event mask has to be changed. In case no change + * to the event mask is needed, skip this command. + */ + if (!changed) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_SET_EVENT_MASK_PAGE_2, + sizeof(events), events, HCI_CMD_TIMEOUT); +} + +/* Read local codec list if the HCI command is supported */ +static int hci_read_local_codecs_sync(struct hci_dev *hdev) +{ + if (!(hdev->commands[29] & 0x20)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_READ_LOCAL_CODECS, 0, NULL, + HCI_CMD_TIMEOUT); +} + +/* Read local pairing options if the HCI command is supported */ +static int hci_read_local_pairing_opts_sync(struct hci_dev *hdev) +{ + if (!(hdev->commands[41] & 0x08)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_READ_LOCAL_PAIRING_OPTS, + 0, NULL, HCI_CMD_TIMEOUT); +} + +/* Get MWS transport configuration if the HCI command is supported */ +static int hci_get_mws_transport_config_sync(struct hci_dev *hdev) +{ + if (!(hdev->commands[30] & 0x08)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_GET_MWS_TRANSPORT_CONFIG, + 0, NULL, HCI_CMD_TIMEOUT); +} + +/* Check for Synchronization Train support */ +static int hci_read_sync_train_params_sync(struct hci_dev *hdev) +{ + if (!lmp_sync_train_capable(hdev)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_READ_SYNC_TRAIN_PARAMS, + 0, NULL, HCI_CMD_TIMEOUT); +} + +/* Enable Secure Connections if supported and configured */ +static int hci_write_sc_support_1_sync(struct hci_dev *hdev) +{ + u8 support = 0x01; + + if (!hci_dev_test_flag(hdev, HCI_SSP_ENABLED) || + !bredr_sc_enabled(hdev)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_SC_SUPPORT, + sizeof(support), &support, + HCI_CMD_TIMEOUT); +} + +/* Set erroneous data reporting if supported to the wideband speech + * setting value + */ +static int hci_set_err_data_report_sync(struct hci_dev *hdev) +{ + struct hci_cp_write_def_err_data_reporting cp; + bool enabled = hci_dev_test_flag(hdev, HCI_WIDEBAND_SPEECH_ENABLED); + + if (!(hdev->commands[18] & 0x08) || + test_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks)) + return 0; + + if (enabled == hdev->err_data_reporting) + return 0; + + memset(&cp, 0, sizeof(cp)); + cp.err_data_reporting = enabled ? ERR_DATA_REPORTING_ENABLED : + ERR_DATA_REPORTING_DISABLED; + + return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_DEF_ERR_DATA_REPORTING, + sizeof(cp), &cp, HCI_CMD_TIMEOUT); +} + +static const struct hci_init_stage hci_init4[] = { + /* HCI_OP_DELETE_STORED_LINK_KEY */ + HCI_INIT(hci_delete_stored_link_key_sync), + /* HCI_OP_SET_EVENT_MASK_PAGE_2 */ + HCI_INIT(hci_set_event_mask_page_2_sync), + /* HCI_OP_READ_LOCAL_CODECS */ + HCI_INIT(hci_read_local_codecs_sync), + /* HCI_OP_READ_LOCAL_PAIRING_OPTS */ + HCI_INIT(hci_read_local_pairing_opts_sync), + /* HCI_OP_GET_MWS_TRANSPORT_CONFIG */ + HCI_INIT(hci_get_mws_transport_config_sync), + /* HCI_OP_READ_SYNC_TRAIN_PARAMS */ + HCI_INIT(hci_read_sync_train_params_sync), + /* HCI_OP_WRITE_SC_SUPPORT */ + HCI_INIT(hci_write_sc_support_1_sync), + /* HCI_OP_WRITE_DEF_ERR_DATA_REPORTING */ + HCI_INIT(hci_set_err_data_report_sync), + {} +}; + +/* Set Suggested Default Data Length to maximum if supported */ +static int hci_le_set_write_def_data_len_sync(struct hci_dev *hdev) +{ + struct hci_cp_le_write_def_data_len cp; + + if (!(hdev->le_features[0] & HCI_LE_DATA_LEN_EXT)) + return 0; + + memset(&cp, 0, sizeof(cp)); + cp.tx_len = cpu_to_le16(hdev->le_max_tx_len); + cp.tx_time = cpu_to_le16(hdev->le_max_tx_time); + + return __hci_cmd_sync_status(hdev, HCI_OP_LE_WRITE_DEF_DATA_LEN, + sizeof(cp), &cp, HCI_CMD_TIMEOUT); +} + +/* Set Default PHY parameters if command is supported */ +static int hci_le_set_default_phy_sync(struct hci_dev *hdev) +{ + struct hci_cp_le_set_default_phy cp; + + if (!(hdev->commands[35] & 0x20)) + return 0; + + memset(&cp, 0, sizeof(cp)); + cp.all_phys = 0x00; + cp.tx_phys = hdev->le_tx_def_phys; + cp.rx_phys = hdev->le_rx_def_phys; + + return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_DEFAULT_PHY, + sizeof(cp), &cp, HCI_CMD_TIMEOUT); +} + +static const struct hci_init_stage le_init4[] = { + /* HCI_OP_LE_WRITE_DEF_DATA_LEN */ + HCI_INIT(hci_le_set_write_def_data_len_sync), + /* HCI_OP_LE_SET_DEFAULT_PHY */ + HCI_INIT(hci_le_set_default_phy_sync), + {} +}; + +static int hci_init4_sync(struct hci_dev *hdev) +{ + int err; + + bt_dev_dbg(hdev, ""); + + err = hci_init_stage_sync(hdev, hci_init4); + if (err) + return err; + + if (lmp_le_capable(hdev)) + return hci_init_stage_sync(hdev, le_init4); + + return 0; +} + +static int hci_init_sync(struct hci_dev *hdev) +{ + int err; + + err = hci_init1_sync(hdev); + if (err < 0) + return err; + + if (hci_dev_test_flag(hdev, HCI_SETUP)) + hci_debugfs_create_basic(hdev); + + err = hci_init2_sync(hdev); + if (err < 0) + return err; + + /* HCI_PRIMARY covers both single-mode LE, BR/EDR and dual-mode + * BR/EDR/LE type controllers. AMP controllers only need the + * first two stages of init. + */ + if (hdev->dev_type != HCI_PRIMARY) + return 0; + + err = hci_init3_sync(hdev); + if (err < 0) + return err; + + err = hci_init4_sync(hdev); + if (err < 0) + return err; + + /* This function is only called when the controller is actually in + * configured state. When the controller is marked as unconfigured, + * this initialization procedure is not run. + * + * It means that it is possible that a controller runs through its + * setup phase and then discovers missing settings. If that is the + * case, then this function will not be called. It then will only + * be called during the config phase. + * + * So only when in setup phase or config phase, create the debugfs + * entries and register the SMP channels. + */ + if (!hci_dev_test_flag(hdev, HCI_SETUP) && + !hci_dev_test_flag(hdev, HCI_CONFIG)) + return 0; + + hci_debugfs_create_common(hdev); + + if (lmp_bredr_capable(hdev)) + hci_debugfs_create_bredr(hdev); + + if (lmp_le_capable(hdev)) + hci_debugfs_create_le(hdev); + + return 0; +} + +int hci_dev_open_sync(struct hci_dev *hdev) +{ + int ret = 0; + + bt_dev_dbg(hdev, ""); + + if (hci_dev_test_flag(hdev, HCI_UNREGISTER)) { + ret = -ENODEV; + goto done; + } + + if (!hci_dev_test_flag(hdev, HCI_SETUP) && + !hci_dev_test_flag(hdev, HCI_CONFIG)) { + /* Check for rfkill but allow the HCI setup stage to + * proceed (which in itself doesn't cause any RF activity). + */ + if (hci_dev_test_flag(hdev, HCI_RFKILLED)) { + ret = -ERFKILL; + goto done; + } + + /* Check for valid public address or a configured static + * random address, but let the HCI setup proceed to + * be able to determine if there is a public address + * or not. + * + * In case of user channel usage, it is not important + * if a public address or static random address is + * available. + * + * This check is only valid for BR/EDR controllers + * since AMP controllers do not have an address. + */ + if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && + hdev->dev_type == HCI_PRIMARY && + !bacmp(&hdev->bdaddr, BDADDR_ANY) && + !bacmp(&hdev->static_addr, BDADDR_ANY)) { + ret = -EADDRNOTAVAIL; + goto done; + } + } + + if (test_bit(HCI_UP, &hdev->flags)) { + ret = -EALREADY; + goto done; + } + + if (hdev->open(hdev)) { + ret = -EIO; + goto done; + } + + set_bit(HCI_RUNNING, &hdev->flags); + hci_sock_dev_event(hdev, HCI_DEV_OPEN); + + atomic_set(&hdev->cmd_cnt, 1); + set_bit(HCI_INIT, &hdev->flags); + + if (hci_dev_test_flag(hdev, HCI_SETUP) || + test_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks)) { + bool invalid_bdaddr; + + hci_sock_dev_event(hdev, HCI_DEV_SETUP); + + if (hdev->setup) + ret = hdev->setup(hdev); + + /* The transport driver can set the quirk to mark the + * BD_ADDR invalid before creating the HCI device or in + * its setup callback. + */ + invalid_bdaddr = test_bit(HCI_QUIRK_INVALID_BDADDR, + &hdev->quirks); + + if (ret) + goto setup_failed; + + if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) { + if (!bacmp(&hdev->public_addr, BDADDR_ANY)) + hci_dev_get_bd_addr_from_property(hdev); + + if (bacmp(&hdev->public_addr, BDADDR_ANY) && + hdev->set_bdaddr) { + ret = hdev->set_bdaddr(hdev, + &hdev->public_addr); + + /* If setting of the BD_ADDR from the device + * property succeeds, then treat the address + * as valid even if the invalid BD_ADDR + * quirk indicates otherwise. + */ + if (!ret) + invalid_bdaddr = false; + } + } + +setup_failed: + /* The transport driver can set these quirks before + * creating the HCI device or in its setup callback. + * + * For the invalid BD_ADDR quirk it is possible that + * it becomes a valid address if the bootloader does + * provide it (see above). + * + * In case any of them is set, the controller has to + * start up as unconfigured. + */ + if (test_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks) || + invalid_bdaddr) + hci_dev_set_flag(hdev, HCI_UNCONFIGURED); + + /* For an unconfigured controller it is required to + * read at least the version information provided by + * the Read Local Version Information command. + * + * If the set_bdaddr driver callback is provided, then + * also the original Bluetooth public device address + * will be read using the Read BD Address command. + */ + if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) + ret = hci_unconf_init_sync(hdev); + } + + if (hci_dev_test_flag(hdev, HCI_CONFIG)) { + /* If public address change is configured, ensure that + * the address gets programmed. If the driver does not + * support changing the public address, fail the power + * on procedure. + */ + if (bacmp(&hdev->public_addr, BDADDR_ANY) && + hdev->set_bdaddr) + ret = hdev->set_bdaddr(hdev, &hdev->public_addr); + else + ret = -EADDRNOTAVAIL; + } + + if (!ret) { + if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && + !hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { + ret = hci_init_sync(hdev); + if (!ret && hdev->post_init) + ret = hdev->post_init(hdev); + } + } + + /* If the HCI Reset command is clearing all diagnostic settings, + * then they need to be reprogrammed after the init procedure + * completed. + */ + if (test_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks) && + !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && + hci_dev_test_flag(hdev, HCI_VENDOR_DIAG) && hdev->set_diag) + ret = hdev->set_diag(hdev, true); + + msft_do_open(hdev); + aosp_do_open(hdev); + + clear_bit(HCI_INIT, &hdev->flags); + + if (!ret) { + hci_dev_hold(hdev); + hci_dev_set_flag(hdev, HCI_RPA_EXPIRED); + hci_adv_instances_set_rpa_expired(hdev, true); + set_bit(HCI_UP, &hdev->flags); + hci_sock_dev_event(hdev, HCI_DEV_UP); + hci_leds_update_powered(hdev, true); + if (!hci_dev_test_flag(hdev, HCI_SETUP) && + !hci_dev_test_flag(hdev, HCI_CONFIG) && + !hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && + !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && + hci_dev_test_flag(hdev, HCI_MGMT) && + hdev->dev_type == HCI_PRIMARY) { + ret = hci_powered_update_sync(hdev); + } + } else { + /* Init failed, cleanup */ + flush_work(&hdev->tx_work); + + /* Since hci_rx_work() is possible to awake new cmd_work + * it should be flushed first to avoid unexpected call of + * hci_cmd_work() + */ + flush_work(&hdev->rx_work); + flush_work(&hdev->cmd_work); + + skb_queue_purge(&hdev->cmd_q); + skb_queue_purge(&hdev->rx_q); + + if (hdev->flush) + hdev->flush(hdev); + + if (hdev->sent_cmd) { + kfree_skb(hdev->sent_cmd); + hdev->sent_cmd = NULL; + } + + clear_bit(HCI_RUNNING, &hdev->flags); + hci_sock_dev_event(hdev, HCI_DEV_CLOSE); + + hdev->close(hdev); + hdev->flags &= BIT(HCI_RAW); + } + +done: + return ret; +} + +/* This function requires the caller holds hdev->lock */ +static void hci_pend_le_actions_clear(struct hci_dev *hdev) +{ + struct hci_conn_params *p; + + list_for_each_entry(p, &hdev->le_conn_params, list) { + if (p->conn) { + hci_conn_drop(p->conn); + hci_conn_put(p->conn); + p->conn = NULL; + } + list_del_init(&p->action); + } + + BT_DBG("All LE pending actions cleared"); +} + +int hci_dev_close_sync(struct hci_dev *hdev) +{ + bool auto_off; + int err = 0; + + bt_dev_dbg(hdev, ""); + + cancel_delayed_work(&hdev->power_off); + cancel_delayed_work(&hdev->ncmd_timer); + + hci_request_cancel_all(hdev); + + if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && + !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && + test_bit(HCI_UP, &hdev->flags)) { + /* Execute vendor specific shutdown routine */ + if (hdev->shutdown) + err = hdev->shutdown(hdev); + } + + if (!test_and_clear_bit(HCI_UP, &hdev->flags)) { + cancel_delayed_work_sync(&hdev->cmd_timer); + return err; + } + + hci_leds_update_powered(hdev, false); + + /* Flush RX and TX works */ + flush_work(&hdev->tx_work); + flush_work(&hdev->rx_work); + + if (hdev->discov_timeout > 0) { + hdev->discov_timeout = 0; + hci_dev_clear_flag(hdev, HCI_DISCOVERABLE); + hci_dev_clear_flag(hdev, HCI_LIMITED_DISCOVERABLE); + } + + if (hci_dev_test_and_clear_flag(hdev, HCI_SERVICE_CACHE)) + cancel_delayed_work(&hdev->service_cache); + + if (hci_dev_test_flag(hdev, HCI_MGMT)) { + struct adv_info *adv_instance; + + cancel_delayed_work_sync(&hdev->rpa_expired); + + list_for_each_entry(adv_instance, &hdev->adv_instances, list) + cancel_delayed_work_sync(&adv_instance->rpa_expired_cb); + } + + /* Avoid potential lockdep warnings from the *_flush() calls by + * ensuring the workqueue is empty up front. + */ + drain_workqueue(hdev->workqueue); + + hci_dev_lock(hdev); + + hci_discovery_set_state(hdev, DISCOVERY_STOPPED); + + auto_off = hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF); + + if (!auto_off && hdev->dev_type == HCI_PRIMARY && + !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && + hci_dev_test_flag(hdev, HCI_MGMT)) + __mgmt_power_off(hdev); + + hci_inquiry_cache_flush(hdev); + hci_pend_le_actions_clear(hdev); + hci_conn_hash_flush(hdev); + hci_dev_unlock(hdev); + + smp_unregister(hdev); + + hci_sock_dev_event(hdev, HCI_DEV_DOWN); + + aosp_do_close(hdev); + msft_do_close(hdev); + + if (hdev->flush) + hdev->flush(hdev); + + /* Reset device */ + skb_queue_purge(&hdev->cmd_q); + atomic_set(&hdev->cmd_cnt, 1); + if (test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks) && + !auto_off && !hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { + set_bit(HCI_INIT, &hdev->flags); + hci_reset_sync(hdev); + clear_bit(HCI_INIT, &hdev->flags); + } + + /* flush cmd work */ + flush_work(&hdev->cmd_work); + + /* Drop queues */ + skb_queue_purge(&hdev->rx_q); + skb_queue_purge(&hdev->cmd_q); + skb_queue_purge(&hdev->raw_q); + + /* Drop last sent command */ + if (hdev->sent_cmd) { + cancel_delayed_work_sync(&hdev->cmd_timer); + kfree_skb(hdev->sent_cmd); + hdev->sent_cmd = NULL; + } + + clear_bit(HCI_RUNNING, &hdev->flags); + hci_sock_dev_event(hdev, HCI_DEV_CLOSE); + + if (test_and_clear_bit(SUSPEND_POWERING_DOWN, hdev->suspend_tasks)) + wake_up(&hdev->suspend_wait_q); + + /* After this point our queues are empty and no tasks are scheduled. */ + hdev->close(hdev); + + /* Clear flags */ + hdev->flags &= BIT(HCI_RAW); + hci_dev_clear_volatile_flags(hdev); + + /* Controller radio is available but is currently powered down */ + hdev->amp_status = AMP_STATUS_POWERED_DOWN; + + memset(hdev->eir, 0, sizeof(hdev->eir)); + memset(hdev->dev_class, 0, sizeof(hdev->dev_class)); + bacpy(&hdev->random_addr, BDADDR_ANY); + + hci_dev_put(hdev); + return err; +} + +/* This function perform power on HCI command sequence as follows: + * + * If controller is already up (HCI_UP) performs hci_powered_update_sync + * sequence otherwise run hci_dev_open_sync which will follow with + * hci_powered_update_sync after the init sequence is completed. + */ +static int hci_power_on_sync(struct hci_dev *hdev) +{ + int err; + + if (test_bit(HCI_UP, &hdev->flags) && + hci_dev_test_flag(hdev, HCI_MGMT) && + hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF)) { + cancel_delayed_work(&hdev->power_off); + return hci_powered_update_sync(hdev); + } + + err = hci_dev_open_sync(hdev); + if (err < 0) + return err; + + /* During the HCI setup phase, a few error conditions are + * ignored and they need to be checked now. If they are still + * valid, it is important to return the device back off. + */ + if (hci_dev_test_flag(hdev, HCI_RFKILLED) || + hci_dev_test_flag(hdev, HCI_UNCONFIGURED) || + (hdev->dev_type == HCI_PRIMARY && + !bacmp(&hdev->bdaddr, BDADDR_ANY) && + !bacmp(&hdev->static_addr, BDADDR_ANY))) { + hci_dev_clear_flag(hdev, HCI_AUTO_OFF); + hci_dev_close_sync(hdev); + } else if (hci_dev_test_flag(hdev, HCI_AUTO_OFF)) { + queue_delayed_work(hdev->req_workqueue, &hdev->power_off, + HCI_AUTO_OFF_TIMEOUT); + } + + if (hci_dev_test_and_clear_flag(hdev, HCI_SETUP)) { + /* For unconfigured devices, set the HCI_RAW flag + * so that userspace can easily identify them. + */ + if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) + set_bit(HCI_RAW, &hdev->flags); + + /* For fully configured devices, this will send + * the Index Added event. For unconfigured devices, + * it will send Unconfigued Index Added event. + * + * Devices with HCI_QUIRK_RAW_DEVICE are ignored + * and no event will be send. + */ + mgmt_index_added(hdev); + } else if (hci_dev_test_and_clear_flag(hdev, HCI_CONFIG)) { + /* When the controller is now configured, then it + * is important to clear the HCI_RAW flag. + */ + if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) + clear_bit(HCI_RAW, &hdev->flags); + + /* Powering on the controller with HCI_CONFIG set only + * happens with the transition from unconfigured to + * configured. This will send the Index Added event. + */ + mgmt_index_added(hdev); + } + + return 0; +} + +static int hci_remote_name_cancel_sync(struct hci_dev *hdev, bdaddr_t *addr) +{ + struct hci_cp_remote_name_req_cancel cp; + + memset(&cp, 0, sizeof(cp)); + bacpy(&cp.bdaddr, addr); + + return __hci_cmd_sync_status(hdev, HCI_OP_REMOTE_NAME_REQ_CANCEL, + sizeof(cp), &cp, HCI_CMD_TIMEOUT); +} + +int hci_stop_discovery_sync(struct hci_dev *hdev) +{ + struct discovery_state *d = &hdev->discovery; + struct inquiry_entry *e; + int err; + + bt_dev_dbg(hdev, "state %u", hdev->discovery.state); + + if (d->state == DISCOVERY_FINDING || d->state == DISCOVERY_STOPPING) { + if (test_bit(HCI_INQUIRY, &hdev->flags)) { + err = __hci_cmd_sync_status(hdev, HCI_OP_INQUIRY_CANCEL, + 0, NULL, HCI_CMD_TIMEOUT); + if (err) + return err; + } + + if (hci_dev_test_flag(hdev, HCI_LE_SCAN)) { + cancel_delayed_work(&hdev->le_scan_disable); + cancel_delayed_work(&hdev->le_scan_restart); + + err = hci_scan_disable_sync(hdev); + if (err) + return err; + } + + } else { + err = hci_scan_disable_sync(hdev); + if (err) + return err; + } + + /* Resume advertising if it was paused */ + if (use_ll_privacy(hdev)) + hci_resume_advertising_sync(hdev); + + /* No further actions needed for LE-only discovery */ + if (d->type == DISCOV_TYPE_LE) + return 0; + + if (d->state == DISCOVERY_RESOLVING || d->state == DISCOVERY_STOPPING) { + e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY, + NAME_PENDING); + if (!e) + return 0; + + return hci_remote_name_cancel_sync(hdev, &e->data.bdaddr); + } + + return 0; +} + +static int hci_disconnect_phy_link_sync(struct hci_dev *hdev, u16 handle, + u8 reason) +{ + struct hci_cp_disconn_phy_link cp; + + memset(&cp, 0, sizeof(cp)); + cp.phy_handle = HCI_PHY_HANDLE(handle); + cp.reason = reason; + + return __hci_cmd_sync_status(hdev, HCI_OP_DISCONN_PHY_LINK, + sizeof(cp), &cp, HCI_CMD_TIMEOUT); +} + +static int hci_disconnect_sync(struct hci_dev *hdev, struct hci_conn *conn, + u8 reason) +{ + struct hci_cp_disconnect cp; + + if (conn->type == AMP_LINK) + return hci_disconnect_phy_link_sync(hdev, conn->handle, reason); + + memset(&cp, 0, sizeof(cp)); + cp.handle = cpu_to_le16(conn->handle); + cp.reason = reason; + + /* Wait for HCI_EV_DISCONN_COMPLETE not HCI_EV_CMD_STATUS when not + * suspending. + */ + if (!hdev->suspended) + return __hci_cmd_sync_status_sk(hdev, HCI_OP_DISCONNECT, + sizeof(cp), &cp, + HCI_EV_DISCONN_COMPLETE, + HCI_CMD_TIMEOUT, NULL); + + return __hci_cmd_sync_status(hdev, HCI_OP_DISCONNECT, sizeof(cp), &cp, + HCI_CMD_TIMEOUT); +} + +static int hci_le_connect_cancel_sync(struct hci_dev *hdev, + struct hci_conn *conn) +{ + if (test_bit(HCI_CONN_SCANNING, &conn->flags)) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_LE_CREATE_CONN_CANCEL, + 6, &conn->dst, HCI_CMD_TIMEOUT); +} + +static int hci_connect_cancel_sync(struct hci_dev *hdev, struct hci_conn *conn) +{ + if (conn->type == LE_LINK) + return hci_le_connect_cancel_sync(hdev, conn); + + if (hdev->hci_ver < BLUETOOTH_VER_1_2) + return 0; + + return __hci_cmd_sync_status(hdev, HCI_OP_CREATE_CONN_CANCEL, + 6, &conn->dst, HCI_CMD_TIMEOUT); +} + +static int hci_reject_sco_sync(struct hci_dev *hdev, struct hci_conn *conn, + u8 reason) +{ + struct hci_cp_reject_sync_conn_req cp; + + memset(&cp, 0, sizeof(cp)); + bacpy(&cp.bdaddr, &conn->dst); + cp.reason = reason; + + /* SCO rejection has its own limited set of + * allowed error values (0x0D-0x0F). + */ + if (reason < 0x0d || reason > 0x0f) + cp.reason = HCI_ERROR_REJ_LIMITED_RESOURCES; + + return __hci_cmd_sync_status(hdev, HCI_OP_REJECT_SYNC_CONN_REQ, + sizeof(cp), &cp, HCI_CMD_TIMEOUT); +} + +static int hci_reject_conn_sync(struct hci_dev *hdev, struct hci_conn *conn, + u8 reason) +{ + struct hci_cp_reject_conn_req cp; + + if (conn->type == SCO_LINK || conn->type == ESCO_LINK) + return hci_reject_sco_sync(hdev, conn, reason); + + memset(&cp, 0, sizeof(cp)); + bacpy(&cp.bdaddr, &conn->dst); + cp.reason = reason; + + return __hci_cmd_sync_status(hdev, HCI_OP_REJECT_CONN_REQ, + sizeof(cp), &cp, HCI_CMD_TIMEOUT); +} + +static int hci_abort_conn_sync(struct hci_dev *hdev, struct hci_conn *conn, + u8 reason) +{ + switch (conn->state) { + case BT_CONNECTED: + case BT_CONFIG: + return hci_disconnect_sync(hdev, conn, reason); + case BT_CONNECT: + return hci_connect_cancel_sync(hdev, conn); + case BT_CONNECT2: + return hci_reject_conn_sync(hdev, conn, reason); + default: + conn->state = BT_CLOSED; + break; + } + + return 0; +} + +/* This function perform power off HCI command sequence as follows: + * + * Clear Advertising + * Stop Discovery + * Disconnect all connections + * hci_dev_close_sync + */ +static int hci_power_off_sync(struct hci_dev *hdev) +{ + struct hci_conn *conn; + int err; + + /* If controller is already down there is nothing to do */ + if (!test_bit(HCI_UP, &hdev->flags)) + return 0; + + if (test_bit(HCI_ISCAN, &hdev->flags) || + test_bit(HCI_PSCAN, &hdev->flags)) { + err = hci_write_scan_enable_sync(hdev, 0x00); + if (err) + return err; + } + + err = hci_clear_adv_sync(hdev, NULL, false); + if (err) + return err; + + err = hci_stop_discovery_sync(hdev); + if (err) + return err; + + list_for_each_entry(conn, &hdev->conn_hash.list, list) { + /* 0x15 == Terminated due to Power Off */ + hci_abort_conn_sync(hdev, conn, 0x15); + } + + return hci_dev_close_sync(hdev); +} + +int hci_set_powered_sync(struct hci_dev *hdev, u8 val) +{ + if (val) + return hci_power_on_sync(hdev); return hci_power_off_sync(hdev); } @@ -2881,6 +4533,5 @@ int hci_start_discovery_sync(struct hci_dev *hdev) queue_delayed_work(hdev->req_workqueue, &hdev->le_scan_disable, timeout); - return 0; } -- cgit v1.2.3