From 6dcc28b93e9675df0f30c063c30d05c1073f1efc Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 17 Jul 2013 02:53:23 +0000 Subject: ixgbe: fully disable hardware RSC logic when disabling RSC This patch modifies the configure_rx path in order to properly disable RSC hardware logic when the user disables it. Previously we only disabled RSC in the queue settings, but this does not fully disable hardware RSC logic which can lead to some unexpected performance issues. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 9 ++++++++- drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 1 + 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 7aba452833e5..ae267868429b 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -3571,7 +3571,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; int i; - u32 rxctrl; + u32 rxctrl, rfctl; /* disable receives while setting up the descriptors */ rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); @@ -3580,6 +3580,13 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) ixgbe_setup_psrtype(adapter); ixgbe_setup_rdrxctl(adapter); + /* RSC Setup */ + rfctl = IXGBE_READ_REG(hw, IXGBE_RFCTL); + rfctl &= ~IXGBE_RFCTL_RSC_DIS; + if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) + rfctl |= IXGBE_RFCTL_RSC_DIS; + IXGBE_WRITE_REG(hw, IXGBE_RFCTL, rfctl); + /* Program registers for the distribution of queues */ ixgbe_setup_mrqc(adapter); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 6442cf8f9dce..10775cb9b6d8 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -1861,6 +1861,7 @@ enum { #define IXGBE_RFCTL_ISCSI_DIS 0x00000001 #define IXGBE_RFCTL_ISCSI_DWC_MASK 0x0000003E #define IXGBE_RFCTL_ISCSI_DWC_SHIFT 1 +#define IXGBE_RFCTL_RSC_DIS 0x00000020 #define IXGBE_RFCTL_NFSW_DIS 0x00000040 #define IXGBE_RFCTL_NFSR_DIS 0x00000080 #define IXGBE_RFCTL_NFS_VER_MASK 0x00000300 -- cgit v1.2.3 From 91ffdc842b8ac0f96b5283b0f0b72927b7dfa8c7 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Tue, 23 Jul 2013 01:56:58 +0000 Subject: ixgbe: fix ethtool loopback diagnostic with DCB enabled This patch disables DCB prior to running the loopback test. When DCB is enabled the frames may be modified on Tx (by adding vlan tag) which will fail the check on Rx. Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Tested-by: Jack Morgan Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 0e1b973659b0..08efc253fb8d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -1805,6 +1805,10 @@ static int ixgbe_run_loopback_test(struct ixgbe_adapter *adapter) unsigned int size = 1024; netdev_tx_t tx_ret_val; struct sk_buff *skb; + u32 flags_orig = adapter->flags; + + /* DCB can modify the frames on Tx */ + adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED; /* allocate test skb */ skb = alloc_skb(size, GFP_KERNEL); @@ -1857,6 +1861,7 @@ static int ixgbe_run_loopback_test(struct ixgbe_adapter *adapter) /* free the original skb */ kfree_skb(skb); + adapter->flags = flags_orig; return ret_val; } -- cgit v1.2.3 From ed33ff66d8064e7b84459ad8ba49aad4cc67c269 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Fri, 30 Aug 2013 07:55:24 +0000 Subject: ixgbe: limit setting speed to only one at a time for QSFP modules QSFP+ modules do not support auto negotiation and should advertise only one speed at a time. This patch adds logic in ethtool to allow setting and reporting the advertised speed at either 1Gbps or 10Gbps, but not both. Also limits the speed set in ixgbe_sfp_link_config_subtask() to highest supported. Previously the link was set to whatever the supported speeds were. Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 13 +++++++++++++ drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 10 +++++++++- 2 files changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 08efc253fb8d..b41db3be9184 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -186,6 +186,11 @@ static int ixgbe_get_settings(struct net_device *netdev, ecmd->advertising |= ADVERTISED_1000baseT_Full; if (supported_link & IXGBE_LINK_SPEED_100_FULL) ecmd->advertising |= ADVERTISED_100baseT_Full; + + if (hw->phy.multispeed_fiber && !autoneg) { + if (supported_link & IXGBE_LINK_SPEED_10GB_FULL) + ecmd->advertising = ADVERTISED_10000baseT_Full; + } } if (autoneg) { @@ -314,6 +319,14 @@ static int ixgbe_set_settings(struct net_device *netdev, if (ecmd->advertising & ~ecmd->supported) return -EINVAL; + /* only allow one speed at a time if no autoneg */ + if (!ecmd->autoneg && hw->phy.multispeed_fiber) { + if (ecmd->advertising == + (ADVERTISED_10000baseT_Full | + ADVERTISED_1000baseT_Full)) + return -EINVAL; + } + old = hw->phy.autoneg_advertised; advertised = 0; if (ecmd->advertising & ADVERTISED_10000baseT_Full) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index ae267868429b..0ade0cd5ef53 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -6000,8 +6000,16 @@ static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter) adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; speed = hw->phy.autoneg_advertised; - if ((!speed) && (hw->mac.ops.get_link_capabilities)) + if ((!speed) && (hw->mac.ops.get_link_capabilities)) { hw->mac.ops.get_link_capabilities(hw, &speed, &autoneg); + + /* setup the highest link when no autoneg */ + if (!autoneg) { + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + speed = IXGBE_LINK_SPEED_10GB_FULL; + } + } + if (hw->mac.ops.setup_link) hw->mac.ops.setup_link(hw, speed, true); -- cgit v1.2.3 From 0f8fdab1334cbd7e65b705cb5db6c3c1d757ffa0 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Sat, 31 Aug 2013 03:08:20 +0000 Subject: ixgbe: fix ethtool reporting of supported links for SFP modules This patch resolves an issue where the driver will display incorrect info for Q/SFP+ modules that were inserted after the driver has been loaded. This patch adds a call to identify_phy() in ixgbe_get_settings() prior to calling get_link_capabilities() which needs the PHY data in order to determine the correct settings. Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index b41db3be9184..e8649abf97c0 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -160,6 +160,13 @@ static int ixgbe_get_settings(struct net_device *netdev, bool autoneg = false; bool link_up; + /* SFP type is needed for get_link_capabilities */ + if (hw->phy.media_type & (ixgbe_media_type_fiber | + ixgbe_media_type_fiber_qsfp)) { + if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) + hw->phy.ops.identify_sfp(hw); + } + hw->mac.ops.get_link_capabilities(hw, &supported_link, &autoneg); /* set the supported link speeds */ -- cgit v1.2.3 From 138953bb6a27fccc59eecd303578260c8c7409d2 Mon Sep 17 00:00:00 2001 From: David Ertman Date: Fri, 30 Aug 2013 05:45:25 +0000 Subject: e1000e: cleanup boolean comparison to true Removing a comparison to the boolean value true where simply interrogating the lvalue will produce the same result. Signed-off-by: David Ertman Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index e87e9b01f404..4ef786775acb 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -4868,7 +4868,7 @@ static void e1000_watchdog_task(struct work_struct *work) */ if ((hw->phy.type == e1000_phy_igp_3 || hw->phy.type == e1000_phy_bm) && - (hw->mac.autoneg == true) && + hw->mac.autoneg && (adapter->link_speed == SPEED_10 || adapter->link_speed == SPEED_100) && (adapter->link_duplex == HALF_DUPLEX)) { -- cgit v1.2.3 From c3a0dce35af02846bdaa1df437493e2fd547ec2f Mon Sep 17 00:00:00 2001 From: David Ertman Date: Thu, 5 Sep 2013 04:24:25 +0000 Subject: e1000e: fix overrun of PHY RAR array When copying the MAC RAR registers to PHY there is an error in the calculation of the rar_entry_count, which causes a write of unknown/ undefined register space in the MAC to unknown/undefined register space in the PHY. This patch fixes the overrun with writing to the PHY RAR and also fixes the ethtool offline register tests so that the correctly addressed registers have the appropriate bitmasks for R/W and RO bits for affected parts. Shawn Rader gets credit for finding and fixing the register overrun. Signed-off-by: Dave Ertman CC: Shawn Rader Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ethtool.c | 8 ++++++++ drivers/net/ethernet/intel/e1000e/ich8lan.c | 13 ++++++++----- drivers/net/ethernet/intel/e1000e/ich8lan.h | 2 +- 3 files changed, 17 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index a8633b8f0ac5..d14c8f53384c 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -922,6 +922,14 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) else mask &= ~(1 << 30); } + if (mac->type == e1000_pch2lan) { + /* SHRAH[0,1,2] different than previous */ + if (i == 7) + mask &= 0xFFF4FFFF; + /* SHRAH[3] different than SHRAH[0,1,2] */ + if (i == 10) + mask |= (1 << 30); + } REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1), mask, 0xFFFFFFFF); diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index af08188d7e62..42f0f6717511 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1371,7 +1371,10 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) return; } - if (index < hw->mac.rar_entry_count) { + /* RAR[1-6] are owned by manageability. Skip those and program the + * next address into the SHRA register array. + */ + if (index < (u32)(hw->mac.rar_entry_count - 6)) { s32 ret_val; ret_val = e1000_acquire_swflag_ich8lan(hw); @@ -1962,8 +1965,8 @@ void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw) if (ret_val) goto release; - /* Copy both RAL/H (rar_entry_count) and SHRAL/H (+4) to PHY */ - for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) { + /* Copy both RAL/H (rar_entry_count) and SHRAL/H to PHY */ + for (i = 0; i < (hw->mac.rar_entry_count); i++) { mac_reg = er32(RAL(i)); hw->phy.ops.write_reg_page(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF)); @@ -2007,10 +2010,10 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) return ret_val; if (enable) { - /* Write Rx addresses (rar_entry_count for RAL/H, +4 for + /* Write Rx addresses (rar_entry_count for RAL/H, and * SHRAL/H) and initial CRC values to the MAC */ - for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) { + for (i = 0; i < hw->mac.rar_entry_count; i++) { u8 mac_addr[ETH_ALEN] = { 0 }; u32 addr_high, addr_low; diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index 59865695b282..217090df33e7 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -98,7 +98,7 @@ #define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL #define E1000_ICH_RAR_ENTRIES 7 -#define E1000_PCH2_RAR_ENTRIES 5 /* RAR[0], SHRA[0-3] */ +#define E1000_PCH2_RAR_ENTRIES 11 /* RAR[0-6], SHRA[0-3] */ #define E1000_PCH_LPT_RAR_ENTRIES 12 /* RAR[0], SHRA[0-10] */ #define PHY_PAGE_SHIFT 5 -- cgit v1.2.3