From c6de2b64eb575a3f9326969ec5fcdc6032b38e42 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 26 May 2005 05:55:55 -0700 Subject: [PATCH] USB: add sl811_cs support This adds support for a CF-card USB Host adapter, the Ratoc REX-CFU1U, by wrapping a PCMCIA driver around the existing "sl811-hcd" platform driver. This CF card is especially useful for PDAs, which currently tend to have no other solution for USB host capability. From: Botond Botyanszki Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 11 ++ drivers/usb/host/Makefile | 1 + drivers/usb/host/sl811_cs.c | 442 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 454 insertions(+) create mode 100644 drivers/usb/host/sl811_cs.c diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 3196c3265ff5..19e598c9641f 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -124,3 +124,14 @@ config USB_SL811_HCD To compile this driver as a module, choose M here: the module will be called sl811-hcd. +config USB_SL811_CS + tristate "CF/PCMCIA support for SL811HS HCD" + depends on USB_SL811_HCD && PCMCIA + default N + help + Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC + REX-CFU1U CF card (often used with PDAs). If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called "sl811_cs". + diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index a574ca06cf6b..5dbd3e7a27c7 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -7,4 +7,5 @@ obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o +obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c new file mode 100644 index 000000000000..6e173265095c --- /dev/null +++ b/drivers/usb/host/sl811_cs.c @@ -0,0 +1,442 @@ +/* + * PCMCIA driver for SL811HS (as found in REX-CFU1U) + * Filename: sl811_cs.c + * Author: Yukio Yamamoto + * + * Port to sl811-hcd and 2.6.x by + * Botond Botyanszki + * Simon Pickering + * + * Last update: 2005-05-12 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +MODULE_AUTHOR("Botond Botyanszki"); +MODULE_DESCRIPTION("REX-CFU1U PCMCIA driver for 2.6"); +MODULE_LICENSE("GPL"); + + +/*====================================================================*/ +/* MACROS */ +/*====================================================================*/ + +#if defined(DEBUG) || defined(CONFIG_USB_DEBUG) || defined(PCMCIA_DEBUG) + +static int pc_debug = 0; +module_param(pc_debug, int, 0644); + +#define DBG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG "sl811_cs: " args) + +#else +#define DBG(n, args...) do{}while(0) +#endif /* no debugging */ + +#define INFO(args...) printk(KERN_INFO "sl811_cs: " args) + +#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0444) + +#define CS_CHECK(fn, ret) \ + do { \ + last_fn = (fn); \ + if ((last_ret = (ret)) != 0) \ + goto cs_failed; \ + } while (0) + +/*====================================================================*/ +/* VARIABLES */ +/*====================================================================*/ + +static const char driver_name[DEV_NAME_LEN] = "sl811_cs"; + +static dev_link_t *dev_list = NULL; + +static int irq_list[4] = { -1 }; +static int irq_list_count; + +module_param_array(irq_list, int, &irq_list_count, 0444); + +INT_MODULE_PARM(irq_mask, 0xdeb8); + +typedef struct local_info_t { + dev_link_t link; + dev_node_t node; +} local_info_t; + +/*====================================================================*/ + +static void release_platform_dev(struct device * dev) +{ + DBG(0, "sl811_cs platform_dev release\n"); + dev->parent = NULL; +} + +static struct sl811_platform_data platform_data = { + .potpg = 100, + .power = 50, /* == 100mA */ + // .reset = ... FIXME: invoke CF reset on the card +}; + +static struct resource resources[] = { + [0] = { + .flags = IORESOURCE_IRQ, + }, + [1] = { + // .name = "address", + .flags = IORESOURCE_IO, + }, + [2] = { + // .name = "data", + .flags = IORESOURCE_IO, + }, +}; + +extern struct device_driver sl811h_driver; + +static struct platform_device platform_dev = { + .id = -1, + .dev = { + .platform_data = &platform_data, + .release = release_platform_dev, + }, + .resource = resources, + .num_resources = ARRAY_SIZE(resources), +}; + +static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq) +{ + if (platform_dev.dev.parent) + return -EBUSY; + platform_dev.dev.parent = parent; + + /* finish seting up the platform device */ + resources[0].start = irq; + + resources[1].start = base_addr; + resources[1].end = base_addr; + + resources[2].start = base_addr + 1; + resources[2].end = base_addr + 1; + + /* The driver core will probe for us. We know sl811-hcd has been + * initialized already because of the link order dependency. + */ + platform_dev.name = sl811h_driver.name; + return platform_device_register(&platform_dev); +} + +/*====================================================================*/ + +static void sl811_cs_detach(dev_link_t *link) +{ + dev_link_t **linkp; + + DBG(0, "sl811_cs_detach(0x%p)\n", link); + + /* Locate device structure */ + for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) { + if (*linkp == link) + break; + } + if (*linkp == NULL) + return; + + /* Break the link with Card Services */ + if (link->handle) + pcmcia_deregister_client(link->handle); + + /* Unlink device structure, and free it */ + *linkp = link->next; + /* This points to the parent local_info_t struct */ + kfree(link->priv); +} + +static void sl811_cs_release(dev_link_t * link) +{ + + DBG(0, "sl811_cs_release(0x%p)\n", link); + + if (link->open) { + DBG(1, "sl811_cs: release postponed, '%s' still open\n", + link->dev->dev_name); + link->state |= DEV_STALE_CONFIG; + return; + } + + /* Unlink the device chain */ + link->dev = NULL; + + platform_device_unregister(&platform_dev); + pcmcia_release_configuration(link->handle); + if (link->io.NumPorts1) + pcmcia_release_io(link->handle, &link->io); + if (link->irq.AssignedIRQ) + pcmcia_release_irq(link->handle, &link->irq); + link->state &= ~DEV_CONFIG; + + if (link->state & DEV_STALE_LINK) + sl811_cs_detach(link); +} + +static void sl811_cs_config(dev_link_t *link) +{ + client_handle_t handle = link->handle; + struct device *parent = &handle_to_dev(handle); + local_info_t *dev = link->priv; + tuple_t tuple; + cisparse_t parse; + int last_fn, last_ret; + u_char buf[64]; + config_info_t conf; + cistpl_cftable_entry_t dflt = { 0 }; + + DBG(0, "sl811_cs_config(0x%p)\n", link); + + tuple.DesiredTuple = CISTPL_CONFIG; + tuple.Attributes = 0; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + + /* Configure card */ + link->state |= DEV_CONFIG; + + /* Look up the current Vcc */ + CS_CHECK(GetConfigurationInfo, + pcmcia_get_configuration_info(handle, &conf)); + link->conf.Vcc = conf.Vcc; + + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + while (1) { + cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); + + if (pcmcia_get_tuple_data(handle, &tuple) != 0 + || pcmcia_parse_tuple(handle, &tuple, &parse) + != 0) + goto next_entry; + + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) { + dflt = *cfg; + } + + if (cfg->index == 0) + goto next_entry; + + link->conf.ConfigIndex = cfg->index; + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1<vcc.param[CISTPL_POWER_VNOM]/10000 + != conf.Vcc) + goto next_entry; + } else if (dflt.vcc.present & (1<vpp1.present & (1<conf.Vpp1 = link->conf.Vpp2 = + cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + else if (dflt.vpp1.present & (1<conf.Vpp1 = link->conf.Vpp2 = + dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; + + /* we need an interrupt */ + if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) + link->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + link->io.NumPorts1 = link->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; + + link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + link->io.BasePort1 = io->win[0].base; + link->io.NumPorts1 = io->win[0].len; + + if (pcmcia_request_io(link->handle, &link->io) != 0) + goto next_entry; + } + break; + +next_entry: + if (link->io.NumPorts1) + pcmcia_release_io(link->handle, &link->io); + last_ret = pcmcia_get_next_tuple(handle, &tuple); + } + + /* require an IRQ and two registers */ + if (!link->io.NumPorts1 || link->io.NumPorts1 < 2) + goto cs_failed; + if (link->conf.Attributes & CONF_ENABLE_IRQ) + CS_CHECK(RequestIRQ, + pcmcia_request_irq(link->handle, &link->irq)); + else + goto cs_failed; + + CS_CHECK(RequestConfiguration, + pcmcia_request_configuration(link->handle, &link->conf)); + + sprintf(dev->node.dev_name, driver_name); + dev->node.major = dev->node.minor = 0; + link->dev = &dev->node; + + printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d", + dev->node.dev_name, link->conf.ConfigIndex, + link->conf.Vcc/10, link->conf.Vcc%10); + if (link->conf.Vpp1) + printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10); + printk(", irq %d", link->irq.AssignedIRQ); + printk(", io 0x%04x-0x%04x", link->io.BasePort1, + link->io.BasePort1+link->io.NumPorts1-1); + printk("\n"); + + link->state &= ~DEV_CONFIG_PENDING; + + if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ) + < 0) { +cs_failed: + printk("sl811_cs_config failed\n"); + cs_error(link->handle, last_fn, last_ret); + sl811_cs_release(link); + link->state &= ~DEV_CONFIG_PENDING; + } +} + +static int +sl811_cs_event(event_t event, int priority, event_callback_args_t *args) +{ + dev_link_t *link = args->client_data; + + DBG(1, "sl811_cs_event(0x%06x)\n", event); + + switch (event) { + case CS_EVENT_CARD_REMOVAL: + link->state &= ~DEV_PRESENT; + if (link->state & DEV_CONFIG) + sl811_cs_release(link); + break; + + case CS_EVENT_CARD_INSERTION: + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + sl811_cs_config(link); + break; + + case CS_EVENT_PM_SUSPEND: + link->state |= DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_RESET_PHYSICAL: + if (link->state & DEV_CONFIG) + pcmcia_release_configuration(link->handle); + break; + + case CS_EVENT_PM_RESUME: + link->state &= ~DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_CARD_RESET: + if (link->state & DEV_CONFIG) + pcmcia_request_configuration(link->handle, &link->conf); + DBG(0, "reset sl811-hcd here?\n"); + break; + } + return 0; +} + +static dev_link_t *sl811_cs_attach(void) +{ + local_info_t *local; + dev_link_t *link; + client_reg_t client_reg; + int ret, i; + + local = kmalloc(sizeof(local_info_t), GFP_KERNEL); + if (!local) + return NULL; + memset(local, 0, sizeof(local_info_t)); + link = &local->link; + link->priv = local; + + /* Initialize */ + link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID; + if (irq_list[0] == -1) + link->irq.IRQInfo2 = irq_mask; + else + for (i = 0; i < irq_list_count; i++) + link->irq.IRQInfo2 |= 1 << irq_list[i]; + link->irq.Handler = NULL; + + link->conf.Attributes = 0; + link->conf.Vcc = 33; + link->conf.IntType = INT_MEMORY_AND_IO; + + /* Register with Card Services */ + link->next = dev_list; + dev_list = link; + client_reg.dev_info = (dev_info_t *) &driver_name; + client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE; + client_reg.EventMask = + CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | + CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | + CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; + client_reg.event_handler = &sl811_cs_event; + client_reg.Version = 0x0210; + client_reg.event_callback_args.client_data = link; + ret = pcmcia_register_client(&link->handle, &client_reg); + if (ret != CS_SUCCESS) { + cs_error(link->handle, RegisterClient, ret); + sl811_cs_detach(link); + return NULL; + } + + return link; +} + +static struct pcmcia_driver sl811_cs_driver = { + .owner = THIS_MODULE, + .drv = { + .name = (char *)driver_name, + }, + .attach = sl811_cs_attach, + .detach = sl811_cs_detach, +}; + +/*====================================================================*/ + +static int __init init_sl811_cs(void) +{ + return pcmcia_register_driver(&sl811_cs_driver); +} +module_init(init_sl811_cs); + +static void __exit exit_sl811_cs(void) +{ + pcmcia_unregister_driver(&sl811_cs_driver); +} +module_exit(exit_sl811_cs); -- cgit v1.2.3