From c44734a875e0529c16a797257978fd9d2182a7ac Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 9 Mar 2018 18:10:45 +0100 Subject: ata: remove bf54x driver The blackfin architecture is getting removed, so this driver is obsolete as well. Acked-by: Tejun Heo Signed-off-by: Arnd Bergmann --- drivers/ata/Kconfig | 9 - drivers/ata/Makefile | 1 - drivers/ata/pata_bf54x.c | 1703 ---------------------------------------------- 3 files changed, 1713 deletions(-) delete mode 100644 drivers/ata/pata_bf54x.c diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index a7120d621154..4582fa27cf37 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -549,15 +549,6 @@ config PATA_ATP867X If unsure, say N. -config PATA_BF54X - tristate "Blackfin 54x ATAPI support" - depends on BF542 || BF548 || BF549 - help - This option enables support for the built-in ATAPI controller on - Blackfin 54x family chips. - - If unsure, say N. - config PATA_BK3710 tristate "Palmchip BK3710 PATA support" depends on ARCH_DAVINCI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index f1f5a3fbc777..6dae8c985e8e 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -53,7 +53,6 @@ obj-$(CONFIG_PATA_AMD) += pata_amd.o obj-$(CONFIG_PATA_ARTOP) += pata_artop.o obj-$(CONFIG_PATA_ATIIXP) += pata_atiixp.o obj-$(CONFIG_PATA_ATP867X) += pata_atp867x.o -obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o obj-$(CONFIG_PATA_BK3710) += pata_bk3710.o obj-$(CONFIG_PATA_CMD64X) += pata_cmd64x.o obj-$(CONFIG_PATA_CS5520) += pata_cs5520.o diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c deleted file mode 100644 index 0e55a8da2748..000000000000 --- a/drivers/ata/pata_bf54x.c +++ /dev/null @@ -1,1703 +0,0 @@ -/* - * File: drivers/ata/pata_bf54x.c - * Author: Sonic Zhang - * - * Created: - * Description: PATA Driver for blackfin 54x - * - * Modified: - * Copyright 2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "pata-bf54x" -#define DRV_VERSION "0.9" - -#define ATA_REG_CTRL 0x0E -#define ATA_REG_ALTSTATUS ATA_REG_CTRL - -/* These are the offset of the controller's registers */ -#define ATAPI_OFFSET_CONTROL 0x00 -#define ATAPI_OFFSET_STATUS 0x04 -#define ATAPI_OFFSET_DEV_ADDR 0x08 -#define ATAPI_OFFSET_DEV_TXBUF 0x0c -#define ATAPI_OFFSET_DEV_RXBUF 0x10 -#define ATAPI_OFFSET_INT_MASK 0x14 -#define ATAPI_OFFSET_INT_STATUS 0x18 -#define ATAPI_OFFSET_XFER_LEN 0x1c -#define ATAPI_OFFSET_LINE_STATUS 0x20 -#define ATAPI_OFFSET_SM_STATE 0x24 -#define ATAPI_OFFSET_TERMINATE 0x28 -#define ATAPI_OFFSET_PIO_TFRCNT 0x2c -#define ATAPI_OFFSET_DMA_TFRCNT 0x30 -#define ATAPI_OFFSET_UMAIN_TFRCNT 0x34 -#define ATAPI_OFFSET_UDMAOUT_TFRCNT 0x38 -#define ATAPI_OFFSET_REG_TIM_0 0x40 -#define ATAPI_OFFSET_PIO_TIM_0 0x44 -#define ATAPI_OFFSET_PIO_TIM_1 0x48 -#define ATAPI_OFFSET_MULTI_TIM_0 0x50 -#define ATAPI_OFFSET_MULTI_TIM_1 0x54 -#define ATAPI_OFFSET_MULTI_TIM_2 0x58 -#define ATAPI_OFFSET_ULTRA_TIM_0 0x60 -#define ATAPI_OFFSET_ULTRA_TIM_1 0x64 -#define ATAPI_OFFSET_ULTRA_TIM_2 0x68 -#define ATAPI_OFFSET_ULTRA_TIM_3 0x6c - - -#define ATAPI_GET_CONTROL(base)\ - bfin_read16(base + ATAPI_OFFSET_CONTROL) -#define ATAPI_SET_CONTROL(base, val)\ - bfin_write16(base + ATAPI_OFFSET_CONTROL, val) -#define ATAPI_GET_STATUS(base)\ - bfin_read16(base + ATAPI_OFFSET_STATUS) -#define ATAPI_GET_DEV_ADDR(base)\ - bfin_read16(base + ATAPI_OFFSET_DEV_ADDR) -#define ATAPI_SET_DEV_ADDR(base, val)\ - bfin_write16(base + ATAPI_OFFSET_DEV_ADDR, val) -#define ATAPI_GET_DEV_TXBUF(base)\ - bfin_read16(base + ATAPI_OFFSET_DEV_TXBUF) -#define ATAPI_SET_DEV_TXBUF(base, val)\ - bfin_write16(base + ATAPI_OFFSET_DEV_TXBUF, val) -#define ATAPI_GET_DEV_RXBUF(base)\ - bfin_read16(base + ATAPI_OFFSET_DEV_RXBUF) -#define ATAPI_SET_DEV_RXBUF(base, val)\ - bfin_write16(base + ATAPI_OFFSET_DEV_RXBUF, val) -#define ATAPI_GET_INT_MASK(base)\ - bfin_read16(base + ATAPI_OFFSET_INT_MASK) -#define ATAPI_SET_INT_MASK(base, val)\ - bfin_write16(base + ATAPI_OFFSET_INT_MASK, val) -#define ATAPI_GET_INT_STATUS(base)\ - bfin_read16(base + ATAPI_OFFSET_INT_STATUS) -#define ATAPI_SET_INT_STATUS(base, val)\ - bfin_write16(base + ATAPI_OFFSET_INT_STATUS, val) -#define ATAPI_GET_XFER_LEN(base)\ - bfin_read16(base + ATAPI_OFFSET_XFER_LEN) -#define ATAPI_SET_XFER_LEN(base, val)\ - bfin_write16(base + ATAPI_OFFSET_XFER_LEN, val) -#define ATAPI_GET_LINE_STATUS(base)\ - bfin_read16(base + ATAPI_OFFSET_LINE_STATUS) -#define ATAPI_GET_SM_STATE(base)\ - bfin_read16(base + ATAPI_OFFSET_SM_STATE) -#define ATAPI_GET_TERMINATE(base)\ - bfin_read16(base + ATAPI_OFFSET_TERMINATE) -#define ATAPI_SET_TERMINATE(base, val)\ - bfin_write16(base + ATAPI_OFFSET_TERMINATE, val) -#define ATAPI_GET_PIO_TFRCNT(base)\ - bfin_read16(base + ATAPI_OFFSET_PIO_TFRCNT) -#define ATAPI_GET_DMA_TFRCNT(base)\ - bfin_read16(base + ATAPI_OFFSET_DMA_TFRCNT) -#define ATAPI_GET_UMAIN_TFRCNT(base)\ - bfin_read16(base + ATAPI_OFFSET_UMAIN_TFRCNT) -#define ATAPI_GET_UDMAOUT_TFRCNT(base)\ - bfin_read16(base + ATAPI_OFFSET_UDMAOUT_TFRCNT) -#define ATAPI_GET_REG_TIM_0(base)\ - bfin_read16(base + ATAPI_OFFSET_REG_TIM_0) -#define ATAPI_SET_REG_TIM_0(base, val)\ - bfin_write16(base + ATAPI_OFFSET_REG_TIM_0, val) -#define ATAPI_GET_PIO_TIM_0(base)\ - bfin_read16(base + ATAPI_OFFSET_PIO_TIM_0) -#define ATAPI_SET_PIO_TIM_0(base, val)\ - bfin_write16(base + ATAPI_OFFSET_PIO_TIM_0, val) -#define ATAPI_GET_PIO_TIM_1(base)\ - bfin_read16(base + ATAPI_OFFSET_PIO_TIM_1) -#define ATAPI_SET_PIO_TIM_1(base, val)\ - bfin_write16(base + ATAPI_OFFSET_PIO_TIM_1, val) -#define ATAPI_GET_MULTI_TIM_0(base)\ - bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_0) -#define ATAPI_SET_MULTI_TIM_0(base, val)\ - bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_0, val) -#define ATAPI_GET_MULTI_TIM_1(base)\ - bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_1) -#define ATAPI_SET_MULTI_TIM_1(base, val)\ - bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_1, val) -#define ATAPI_GET_MULTI_TIM_2(base)\ - bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_2) -#define ATAPI_SET_MULTI_TIM_2(base, val)\ - bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_2, val) -#define ATAPI_GET_ULTRA_TIM_0(base)\ - bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_0) -#define ATAPI_SET_ULTRA_TIM_0(base, val)\ - bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_0, val) -#define ATAPI_GET_ULTRA_TIM_1(base)\ - bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_1) -#define ATAPI_SET_ULTRA_TIM_1(base, val)\ - bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_1, val) -#define ATAPI_GET_ULTRA_TIM_2(base)\ - bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_2) -#define ATAPI_SET_ULTRA_TIM_2(base, val)\ - bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_2, val) -#define ATAPI_GET_ULTRA_TIM_3(base)\ - bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_3) -#define ATAPI_SET_ULTRA_TIM_3(base, val)\ - bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_3, val) - -/** - * PIO Mode - Frequency compatibility - */ -/* mode: 0 1 2 3 4 */ -static const u32 pio_fsclk[] = -{ 33333333, 33333333, 33333333, 33333333, 33333333 }; - -/** - * MDMA Mode - Frequency compatibility - */ -/* mode: 0 1 2 */ -static const u32 mdma_fsclk[] = { 33333333, 33333333, 33333333 }; - -/** - * UDMA Mode - Frequency compatibility - * - * UDMA5 - 100 MB/s - SCLK = 133 MHz - * UDMA4 - 66 MB/s - SCLK >= 80 MHz - * UDMA3 - 44.4 MB/s - SCLK >= 50 MHz - * UDMA2 - 33 MB/s - SCLK >= 40 MHz - */ -/* mode: 0 1 2 3 4 5 */ -static const u32 udma_fsclk[] = -{ 33333333, 33333333, 40000000, 50000000, 80000000, 133333333 }; - -/** - * Register transfer timing table - */ -/* mode: 0 1 2 3 4 */ -/* Cycle Time */ -static const u32 reg_t0min[] = { 600, 383, 330, 180, 120 }; -/* DIOR/DIOW to end cycle */ -static const u32 reg_t2min[] = { 290, 290, 290, 70, 25 }; -/* DIOR/DIOW asserted pulse width */ -static const u32 reg_teocmin[] = { 290, 290, 290, 80, 70 }; - -/** - * PIO timing table - */ -/* mode: 0 1 2 3 4 */ -/* Cycle Time */ -static const u32 pio_t0min[] = { 600, 383, 240, 180, 120 }; -/* Address valid to DIOR/DIORW */ -static const u32 pio_t1min[] = { 70, 50, 30, 30, 25 }; -/* DIOR/DIOW to end cycle */ -static const u32 pio_t2min[] = { 165, 125, 100, 80, 70 }; -/* DIOR/DIOW asserted pulse width */ -static const u32 pio_teocmin[] = { 165, 125, 100, 70, 25 }; -/* DIOW data hold */ -static const u32 pio_t4min[] = { 30, 20, 15, 10, 10 }; - -/* ****************************************************************** - * Multiword DMA timing table - * ****************************************************************** - */ -/* mode: 0 1 2 */ -/* Cycle Time */ -static const u32 mdma_t0min[] = { 480, 150, 120 }; -/* DIOR/DIOW asserted pulse width */ -static const u32 mdma_tdmin[] = { 215, 80, 70 }; -/* DMACK to read data released */ -static const u32 mdma_thmin[] = { 20, 15, 10 }; -/* DIOR/DIOW to DMACK hold */ -static const u32 mdma_tjmin[] = { 20, 5, 5 }; -/* DIOR negated pulse width */ -static const u32 mdma_tkrmin[] = { 50, 50, 25 }; -/* DIOR negated pulse width */ -static const u32 mdma_tkwmin[] = { 215, 50, 25 }; -/* CS[1:0] valid to DIOR/DIOW */ -static const u32 mdma_tmmin[] = { 50, 30, 25 }; -/* DMACK to read data released */ -static const u32 mdma_tzmax[] = { 20, 25, 25 }; - -/** - * Ultra DMA timing table - */ -/* mode: 0 1 2 3 4 5 */ -static const u32 udma_tcycmin[] = { 112, 73, 54, 39, 25, 17 }; -static const u32 udma_tdvsmin[] = { 70, 48, 31, 20, 7, 5 }; -static const u32 udma_tenvmax[] = { 70, 70, 70, 55, 55, 50 }; -static const u32 udma_trpmin[] = { 160, 125, 100, 100, 100, 85 }; -static const u32 udma_tmin[] = { 5, 5, 5, 5, 3, 3 }; - - -static const u32 udma_tmlimin = 20; -static const u32 udma_tzahmin = 20; -static const u32 udma_tenvmin = 20; -static const u32 udma_tackmin = 20; -static const u32 udma_tssmin = 50; - -#define BFIN_MAX_SG_SEGMENTS 4 - -/** - * - * Function: num_clocks_min - * - * Description: - * calculate number of SCLK cycles to meet minimum timing - */ -static unsigned short num_clocks_min(unsigned long tmin, - unsigned long fsclk) -{ - unsigned long tmp ; - unsigned short result; - - tmp = tmin * (fsclk/1000/1000) / 1000; - result = (unsigned short)tmp; - if ((tmp*1000*1000) < (tmin*(fsclk/1000))) { - result++; - } - - return result; -} - -/** - * bfin_set_piomode - Initialize host controller PATA PIO timings - * @ap: Port whose timings we are configuring - * @adev: um - * - * Set PIO mode for device. - * - * LOCKING: - * None (inherited from caller). - */ - -static void bfin_set_piomode(struct ata_port *ap, struct ata_device *adev) -{ - int mode = adev->pio_mode - XFER_PIO_0; - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - unsigned int fsclk = get_sclk(); - unsigned short teoc_reg, t2_reg, teoc_pio; - unsigned short t4_reg, t2_pio, t1_reg; - unsigned short n0, n6, t6min = 5; - - /* the most restrictive timing value is t6 and tc, the DIOW - data hold - * If one SCLK pulse is longer than this minimum value then register - * transfers cannot be supported at this frequency. - */ - n6 = num_clocks_min(t6min, fsclk); - if (mode >= 0 && mode <= 4 && n6 >= 1) { - dev_dbg(adev->link->ap->dev, "set piomode: mode=%d, fsclk=%ud\n", mode, fsclk); - /* calculate the timing values for register transfers. */ - while (mode > 0 && pio_fsclk[mode] > fsclk) - mode--; - - /* DIOR/DIOW to end cycle time */ - t2_reg = num_clocks_min(reg_t2min[mode], fsclk); - /* DIOR/DIOW asserted pulse width */ - teoc_reg = num_clocks_min(reg_teocmin[mode], fsclk); - /* Cycle Time */ - n0 = num_clocks_min(reg_t0min[mode], fsclk); - - /* increase t2 until we meed the minimum cycle length */ - if (t2_reg + teoc_reg < n0) - t2_reg = n0 - teoc_reg; - - /* calculate the timing values for pio transfers. */ - - /* DIOR/DIOW to end cycle time */ - t2_pio = num_clocks_min(pio_t2min[mode], fsclk); - /* DIOR/DIOW asserted pulse width */ - teoc_pio = num_clocks_min(pio_teocmin[mode], fsclk); - /* Cycle Time */ - n0 = num_clocks_min(pio_t0min[mode], fsclk); - - /* increase t2 until we meed the minimum cycle length */ - if (t2_pio + teoc_pio < n0) - t2_pio = n0 - teoc_pio; - - /* Address valid to DIOR/DIORW */ - t1_reg = num_clocks_min(pio_t1min[mode], fsclk); - - /* DIOW data hold */ - t4_reg = num_clocks_min(pio_t4min[mode], fsclk); - - ATAPI_SET_REG_TIM_0(base, (teoc_reg<<8 | t2_reg)); - ATAPI_SET_PIO_TIM_0(base, (t4_reg<<12 | t2_pio<<4 | t1_reg)); - ATAPI_SET_PIO_TIM_1(base, teoc_pio); - if (mode > 2) { - ATAPI_SET_CONTROL(base, - ATAPI_GET_CONTROL(base) | IORDY_EN); - } else { - ATAPI_SET_CONTROL(base, - ATAPI_GET_CONTROL(base) & ~IORDY_EN); - } - - /* Disable host ATAPI PIO interrupts */ - ATAPI_SET_INT_MASK(base, ATAPI_GET_INT_MASK(base) - & ~(PIO_DONE_MASK | HOST_TERM_XFER_MASK)); - SSYNC(); - } -} - -/** - * bfin_set_dmamode - Initialize host controller PATA DMA timings - * @ap: Port whose timings we are configuring - * @adev: um - * - * Set UDMA mode for device. - * - * LOCKING: - * None (inherited from caller). - */ - -static void bfin_set_dmamode(struct ata_port *ap, struct ata_device *adev) -{ - int mode; - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - unsigned long fsclk = get_sclk(); - unsigned short tenv, tack, tcyc_tdvs, tdvs, tmli, tss, trp, tzah; - unsigned short tm, td, tkr, tkw, teoc, th; - unsigned short n0, nf, tfmin = 5; - unsigned short nmin, tcyc; - - mode = adev->dma_mode - XFER_UDMA_0; - if (mode >= 0 && mode <= 5) { - dev_dbg(adev->link->ap->dev, "set udmamode: mode=%d\n", mode); - /* the most restrictive timing value is t6 and tc, - * the DIOW - data hold. If one SCLK pulse is longer - * than this minimum value then register - * transfers cannot be supported at this frequency. - */ - while (mode > 0 && udma_fsclk[mode] > fsclk) - mode--; - - nmin = num_clocks_min(udma_tmin[mode], fsclk); - if (nmin >= 1) { - /* calculate the timing values for Ultra DMA. */ - tdvs = num_clocks_min(udma_tdvsmin[mode], fsclk); - tcyc = num_clocks_min(udma_tcycmin[mode], fsclk); - tcyc_tdvs = 2; - - /* increase tcyc - tdvs (tcyc_tdvs) until we meed - * the minimum cycle length - */ - if (tdvs + tcyc_tdvs < tcyc) - tcyc_tdvs = tcyc - tdvs; - - /* Mow assign the values required for the timing - * registers - */ - if (tcyc_tdvs < 2) - tcyc_tdvs = 2; - - if (tdvs < 2) - tdvs = 2; - - tack = num_clocks_min(udma_tackmin, fsclk); - tss = num_clocks_min(udma_tssmin, fsclk); - tmli = num_clocks_min(udma_tmlimin, fsclk); - tzah = num_clocks_min(udma_tzahmin, fsclk); - trp = num_clocks_min(udma_trpmin[mode], fsclk); - tenv = num_clocks_min(udma_tenvmin, fsclk); - if (tenv <= udma_tenvmax[mode]) { - ATAPI_SET_ULTRA_TIM_0(base, (tenv<<8 | tack)); - ATAPI_SET_ULTRA_TIM_1(base, - (tcyc_tdvs<<8 | tdvs)); - ATAPI_SET_ULTRA_TIM_2(base, (tmli<<8 | tss)); - ATAPI_SET_ULTRA_TIM_3(base, (trp<<8 | tzah)); - } - } - } - - mode = adev->dma_mode - XFER_MW_DMA_0; - if (mode >= 0 && mode <= 2) { - dev_dbg(adev->link->ap->dev, "set mdmamode: mode=%d\n", mode); - /* the most restrictive timing value is tf, the DMACK to - * read data released. If one SCLK pulse is longer than - * this maximum value then the MDMA mode - * cannot be supported at this frequency. - */ - while (mode > 0 && mdma_fsclk[mode] > fsclk) - mode--; - - nf = num_clocks_min(tfmin, fsclk); - if (nf >= 1) { - /* calculate the timing values for Multi-word DMA. */ - - /* DIOR/DIOW asserted pulse width */ - td = num_clocks_min(mdma_tdmin[mode], fsclk); - - /* DIOR negated pulse width */ - tkw = num_clocks_min(mdma_tkwmin[mode], fsclk); - - /* Cycle Time */ - n0 = num_clocks_min(mdma_t0min[mode], fsclk); - - /* increase tk until we meed the minimum cycle length */ - if (tkw + td < n0) - tkw = n0 - td; - - /* DIOR negated pulse width - read */ - tkr = num_clocks_min(mdma_tkrmin[mode], fsclk); - /* CS{1:0] valid to DIOR/DIOW */ - tm = num_clocks_min(mdma_tmmin[mode], fsclk); - /* DIOR/DIOW to DMACK hold */ - teoc = num_clocks_min(mdma_tjmin[mode], fsclk); - /* DIOW Data hold */ - th = num_clocks_min(mdma_thmin[mode], fsclk); - - ATAPI_SET_MULTI_TIM_0(base, (tm<<8 | td)); - ATAPI_SET_MULTI_TIM_1(base, (tkr<<8 | tkw)); - ATAPI_SET_MULTI_TIM_2(base, (teoc<<8 | th)); - SSYNC(); - } - } - return; -} - -/** - * - * Function: wait_complete - * - * Description: Waits the interrupt from device - * - */ -static inline void wait_complete(void __iomem *base, unsigned short mask) -{ - unsigned short status; - unsigned int i = 0; - -#define PATA_BF54X_WAIT_TIMEOUT 10000 - - for (i = 0; i < PATA_BF54X_WAIT_TIMEOUT; i++) { - status = ATAPI_GET_INT_STATUS(base) & mask; - if (status) - break; - } - - ATAPI_SET_INT_STATUS(base, mask); -} - -/** - * - * Function: write_atapi_register - * - * Description: Writes to ATA Device Resgister - * - */ - -static void write_atapi_register(void __iomem *base, - unsigned long ata_reg, unsigned short value) -{ - /* Program the ATA_DEV_TXBUF register with write data (to be - * written into the device). - */ - ATAPI_SET_DEV_TXBUF(base, value); - - /* Program the ATA_DEV_ADDR register with address of the - * device register (0x01 to 0x0F). - */ - ATAPI_SET_DEV_ADDR(base, ata_reg); - - /* Program the ATA_CTRL register with dir set to write (1) - */ - ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | XFER_DIR)); - - /* ensure PIO DMA is not set */ - ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA)); - - /* and start the transfer */ - ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START)); - - /* Wait for the interrupt to indicate the end of the transfer. - * (We need to wait on and clear rhe ATA_DEV_INT interrupt status) - */ - wait_complete(base, PIO_DONE_INT); -} - -/** - * - * Function: read_atapi_register - * - *Description: Reads from ATA Device Resgister - * - */ - -static unsigned short read_atapi_register(void __iomem *base, - unsigned long ata_reg) -{ - /* Program the ATA_DEV_ADDR register with address of the - * device register (0x01 to 0x0F). - */ - ATAPI_SET_DEV_ADDR(base, ata_reg); - - /* Program the ATA_CTRL register with dir set to read (0) and - */ - ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~XFER_DIR)); - - /* ensure PIO DMA is not set */ - ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA)); - - /* and start the transfer */ - ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START)); - - /* Wait for the interrupt to indicate the end of the transfer. - * (PIO_DONE interrupt is set and it doesn't seem to matter - * that we don't clear it) - */ - wait_complete(base, PIO_DONE_INT); - - /* Read the ATA_DEV_RXBUF register with write data (to be - * written into the device). - */ - return ATAPI_GET_DEV_RXBUF(base); -} - -/** - * - * Function: write_atapi_register_data - * - * Description: Writes to ATA Device Resgister - * - */ - -static void write_atapi_data(void __iomem *base, - int len, unsigned short *buf) -{ - int i; - - /* Set transfer length to 1 */ - ATAPI_SET_XFER_LEN(base, 1); - - /* Program the ATA_DEV_ADDR register with address of the - * ATA_REG_DATA - */ - ATAPI_SET_DEV_ADDR(base, ATA_REG_DATA); - - /* Program the ATA_CTRL register with dir set to write (1) - */ - ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | XFER_DIR)); - - /* ensure PIO DMA is not set */ - ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA)); - - for (i = 0; i < len; i++) { - /* Program the ATA_DEV_TXBUF register with write data (to be - * written into the device). - */ - ATAPI_SET_DEV_TXBUF(base, buf[i]); - - /* and start the transfer */ - ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START)); - - /* Wait for the interrupt to indicate the end of the transfer. - * (We need to wait on and clear rhe ATA_DEV_INT - * interrupt status) - */ - wait_complete(base, PIO_DONE_INT); - } -} - -/** - * - * Function: read_atapi_register_data - * - * Description: Reads from ATA Device Resgister - * - */ - -static void read_atapi_data(void __iomem *base, - int len, unsigned short *buf) -{ - int i; - - /* Set transfer length to 1 */ - ATAPI_SET_XFER_LEN(base, 1); - - /* Program the ATA_DEV_ADDR register with address of the - * ATA_REG_DATA - */ - ATAPI_SET_DEV_ADDR(base, ATA_REG_DATA); - - /* Program the ATA_CTRL register with dir set to read (0) and - */ - ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~XFER_DIR)); - - /* ensure PIO DMA is not set */ - ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA)); - - for (i = 0; i < len; i++) { - /* and start the transfer */ - ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START)); - - /* Wait for the interrupt to indicate the end of the transfer. - * (PIO_DONE interrupt is set and it doesn't seem to matter - * that we don't clear it) - */ - wait_complete(base, PIO_DONE_INT); - - /* Read the ATA_DEV_RXBUF register with write data (to be - * written into the device). - */ - buf[i] = ATAPI_GET_DEV_RXBUF(base); - } -} - -/** - * bfin_tf_load - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Note: Original code is ata_sff_tf_load(). - */ - -static void bfin_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) -{ - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - write_atapi_register(base, ATA_REG_CTRL, tf->ctl); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr) { - if (tf->flags & ATA_TFLAG_LBA48) { - write_atapi_register(base, ATA_REG_FEATURE, - tf->hob_feature); - write_atapi_register(base, ATA_REG_NSECT, - tf->hob_nsect); - write_atapi_register(base, ATA_REG_LBAL, tf->hob_lbal); - write_atapi_register(base, ATA_REG_LBAM, tf->hob_lbam); - write_atapi_register(base, ATA_REG_LBAH, tf->hob_lbah); - dev_dbg(ap->dev, "hob: feat 0x%X nsect 0x%X, lba 0x%X " - "0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - write_atapi_register(base, ATA_REG_FEATURE, tf->feature); - write_atapi_register(base, ATA_REG_NSECT, tf->nsect); - write_atapi_register(base, ATA_REG_LBAL, tf->lbal); - write_atapi_register(base, ATA_REG_LBAM, tf->lbam); - write_atapi_register(base, ATA_REG_LBAH, tf->lbah); - dev_dbg(ap->dev, "feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - write_atapi_register(base, ATA_REG_DEVICE, tf->device); - dev_dbg(ap->dev, "device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - -/** - * bfin_check_status - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Note: Original code is ata_check_status(). - */ - -static u8 bfin_check_status(struct ata_port *ap) -{ - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - return read_atapi_register(base, ATA_REG_STATUS); -} - -/** - * bfin_tf_read - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Note: Original code is ata_sff_tf_read(). - */ - -static void bfin_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - - tf->command = bfin_check_status(ap); - tf->feature = read_atapi_register(base, ATA_REG_ERR); - tf->nsect = read_atapi_register(base, ATA_REG_NSECT); - tf->lbal = read_atapi_register(base, ATA_REG_LBAL); - tf->lbam = read_atapi_register(base, ATA_REG_LBAM); - tf->lbah = read_atapi_register(base, ATA_REG_LBAH); - tf->device = read_atapi_register(base, ATA_REG_DEVICE); - - if (tf->flags & ATA_TFLAG_LBA48) { - write_atapi_register(base, ATA_REG_CTRL, tf->ctl | ATA_HOB); - tf->hob_feature = read_atapi_register(base, ATA_REG_ERR); - tf->hob_nsect = read_atapi_register(base, ATA_REG_NSECT); - tf->hob_lbal = read_atapi_register(base, ATA_REG_LBAL); - tf->hob_lbam = read_atapi_register(base, ATA_REG_LBAM); - tf->hob_lbah = read_atapi_register(base, ATA_REG_LBAH); - } -} - -/** - * bfin_exec_command - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Note: Original code is ata_sff_exec_command(). - */ - -static void bfin_exec_command(struct ata_port *ap, - const struct ata_taskfile *tf) -{ - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - dev_dbg(ap->dev, "ata%u: cmd 0x%X\n", ap->print_id, tf->command); - - write_atapi_register(base, ATA_REG_CMD, tf->command); - ata_sff_pause(ap); -} - -/** - * bfin_check_altstatus - Read device alternate status reg - * @ap: port where the device is - */ - -static u8 bfin_check_altstatus(struct ata_port *ap) -{ - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - return read_atapi_register(base, ATA_REG_ALTSTATUS); -} - -/** - * bfin_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * - * Note: Original code is ata_sff_dev_select(). - */ - -static void bfin_dev_select(struct ata_port *ap, unsigned int device) -{ - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - u8 tmp; - - if (device == 0) - tmp = ATA_DEVICE_OBS; - else - tmp = ATA_DEVICE_OBS | ATA_DEV1; - - write_atapi_register(base, ATA_REG_DEVICE, tmp); - ata_sff_pause(ap); -} - -/** - * bfin_set_devctl - Write device control reg - * @ap: port where the device is - * @ctl: value to write - */ - -static void bfin_set_devctl(struct ata_port *ap, u8 ctl) -{ - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - write_atapi_register(base, ATA_REG_CTRL, ctl); -} - -/** - * bfin_bmdma_setup - Set up IDE DMA transaction - * @qc: Info associated with this ATA transaction. - * - * Note: Original code is ata_bmdma_setup(). - */ - -static void bfin_bmdma_setup(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct dma_desc_array *dma_desc_cpu = (struct dma_desc_array *)ap->bmdma_prd; - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - unsigned short config = DMAFLOW_ARRAY | NDSIZE_5 | RESTART | WDSIZE_16 | DMAEN; - struct scatterlist *sg; - unsigned int si; - unsigned int channel; - unsigned int dir; - unsigned int size = 0; - - dev_dbg(qc->ap->dev, "in atapi dma setup\n"); - /* Program the ATA_CTRL register with dir */ - if (qc->tf.flags & ATA_TFLAG_WRITE) { - channel = CH_ATAPI_TX; - dir = DMA_TO_DEVICE; - } else { - channel = CH_ATAPI_RX; - dir = DMA_FROM_DEVICE; - config |= WNR; - } - - dma_map_sg(ap->dev, qc->sg, qc->n_elem, dir); - - /* fill the ATAPI DMA controller */ - for_each_sg(qc->sg, sg, qc->n_elem, si) { - dma_desc_cpu[si].start_addr = sg_dma_address(sg); - dma_desc_cpu[si].cfg = config; - dma_desc_cpu[si].x_count = sg_dma_len(sg) >> 1; - dma_desc_cpu[si].x_modify = 2; - size += sg_dma_len(sg); - } - - /* Set the last descriptor to stop mode */ - dma_desc_cpu[qc->n_elem - 1].cfg &= ~(DMAFLOW | NDSIZE); - - flush_dcache_range((unsigned int)dma_desc_cpu, - (unsigned int)dma_desc_cpu + - qc->n_elem * sizeof(struct dma_desc_array)); - - /* Enable ATA DMA operation*/ - set_dma_curr_desc_addr(channel, (unsigned long *)ap->bmdma_prd_dma); - set_dma_x_count(channel, 0); - set_dma_x_modify(channel, 0); - set_dma_config(channel, config); - - SSYNC(); - - /* Send ATA DMA command */ - bfin_exec_command(ap, &qc->tf); - - if (qc->tf.flags & ATA_TFLAG_WRITE) { - /* set ATA DMA write direction */ - ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) - | XFER_DIR)); - } else { - /* set ATA DMA read direction */ - ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) - & ~XFER_DIR)); - } - - /* Reset all transfer count */ - ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | TFRCNT_RST); - - /* Set ATAPI state machine contorl in terminate sequence */ - ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | END_ON_TERM); - - /* Set transfer length to the total size of sg buffers */ - ATAPI_SET_XFER_LEN(base, size >> 1); -} - -/** - * bfin_bmdma_start - Start an IDE DMA transaction - * @qc: Info associated with this ATA transaction. - * - * Note: Original code is ata_bmdma_start(). - */ - -static void bfin_bmdma_start(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - - dev_dbg(qc->ap->dev, "in atapi dma start\n"); - - if (!(ap->udma_mask || ap->mwdma_mask)) - return; - - /* start ATAPI transfer*/ - if (ap->udma_mask) - ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) - | ULTRA_START); - else - ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) - | MULTI_START); -} - -/** - * bfin_bmdma_stop - Stop IDE DMA transfer - * @qc: Command we are ending DMA for - */ - -static void bfin_bmdma_stop(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int dir; - - dev_dbg(qc->ap->dev, "in atapi dma stop\n"); - - if (!(ap->udma_mask || ap->mwdma_mask)) - return; - - /* stop ATAPI DMA controller*/ - if (qc->tf.flags & ATA_TFLAG_WRITE) { - dir = DMA_TO_DEVICE; - disable_dma(CH_ATAPI_TX); - } else { - dir = DMA_FROM_DEVICE; - disable_dma(CH_ATAPI_RX); - } - - dma_unmap_sg(ap->dev, qc->sg, qc->n_elem, dir); -} - -/** - * bfin_devchk - PATA device presence detection - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * - * Note: Original code is ata_devchk(). - */ - -static unsigned int bfin_devchk(struct ata_port *ap, - unsigned int device) -{ - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - u8 nsect, lbal; - - bfin_dev_select(ap, device); - - write_atapi_register(base, ATA_REG_NSECT, 0x55); - write_atapi_register(base, ATA_REG_LBAL, 0xaa); - - write_atapi_register(base, ATA_REG_NSECT, 0xaa); - write_atapi_register(base, ATA_REG_LBAL, 0x55); - - write_atapi_register(base, ATA_REG_NSECT, 0x55); - write_atapi_register(base, ATA_REG_LBAL, 0xaa); - - nsect = read_atapi_register(base, ATA_REG_NSECT); - lbal = read_atapi_register(base, ATA_REG_LBAL); - - if ((nsect == 0x55) && (lbal == 0xaa)) - return 1; /* we found a device */ - - return 0; /* nothing found */ -} - -/** - * bfin_bus_post_reset - PATA device post reset - * - * Note: Original code is ata_bus_post_reset(). - */ - -static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask) -{ - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - unsigned int dev0 = devmask & (1 << 0); - unsigned int dev1 = devmask & (1 << 1); - unsigned long deadline; - - /* if device 0 was found in ata_devchk, wait for its - * BSY bit to clear - */ - if (dev0) - ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); - - /* if device 1 was found in ata_devchk, wait for - * register access, then wait for BSY to clear - */ - deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT); - while (dev1) { - u8 nsect, lbal; - - bfin_dev_select(ap, 1); - nsect = read_atapi_register(base, ATA_REG_NSECT); - lbal = read_atapi_register(base, ATA_REG_LBAL); - if ((nsect == 1) && (lbal == 1)) - break; - if (time_after(jiffies, deadline)) { - dev1 = 0; - break; - } - ata_msleep(ap, 50); /* give drive a breather */ - } - if (dev1) - ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); - - /* is all this really necessary? */ - bfin_dev_select(ap, 0); - if (dev1) - bfin_dev_select(ap, 1); - if (dev0) - bfin_dev_select(ap, 0); -} - -/** - * bfin_bus_softreset - PATA device software reset - * - * Note: Original code is ata_bus_softreset(). - */ - -static unsigned int bfin_bus_softreset(struct ata_port *ap, - unsigned int devmask) -{ - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - - /* software reset. causes dev0 to be selected */ - write_atapi_register(base, ATA_REG_CTRL, ap->ctl); - udelay(20); - write_atapi_register(base, ATA_REG_CTRL, ap->ctl | ATA_SRST); - udelay(20); - write_atapi_register(base, ATA_REG_CTRL, ap->ctl); - - /* spec mandates ">= 2ms" before checking status. - * We wait 150ms, because that was the magic delay used for - * ATAPI devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - * - * Old drivers/ide uses the 2mS rule and then waits for ready - */ - ata_msleep(ap, 150); - - /* Before we perform post reset processing we want to see if - * the bus shows 0xFF because the odd clown forgets the D7 - * pulldown resistor. - */ - if (bfin_check_status(ap) == 0xFF) - return 0; - - bfin_bus_post_reset(ap, devmask); - - return 0; -} - -/** - * bfin_softreset - reset host port via ATA SRST - * @ap: port to reset - * @classes: resulting classes of attached devices - * - * Note: Original code is ata_sff_softreset(). - */ - -static int bfin_softreset(struct ata_link *link, unsigned int *classes, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - unsigned int devmask = 0, err_mask; - u8 err; - - /* determine if device 0/1 are present */ - if (bfin_devchk(ap, 0)) - devmask |= (1 << 0); - if (slave_possible && bfin_devchk(ap, 1)) - devmask |= (1 << 1); - - /* select device 0 again */ - bfin_dev_select(ap, 0); - - /* issue bus reset */ - err_mask = bfin_bus_softreset(ap, devmask); - if (err_mask) { - ata_port_err(ap, "SRST failed (err_mask=0x%x)\n", - err_mask); - return -EIO; - } - - /* determine by signature whether we have ATA or ATAPI devices */ - classes[0] = ata_sff_dev_classify(&ap->link.device[0], - devmask & (1 << 0), &err); - if (slave_possible && err != 0x81) - classes[1] = ata_sff_dev_classify(&ap->link.device[1], - devmask & (1 << 1), &err); - - return 0; -} - -/** - * bfin_bmdma_status - Read IDE DMA status - * @ap: Port associated with this ATA transaction. - */ - -static unsigned char bfin_bmdma_status(struct ata_port *ap) -{ - unsigned char host_stat = 0; - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - - if (ATAPI_GET_STATUS(base) & (MULTI_XFER_ON | ULTRA_XFER_ON)) - host_stat |= ATA_DMA_ACTIVE; - if (ATAPI_GET_INT_STATUS(base) & ATAPI_DEV_INT) - host_stat |= ATA_DMA_INTR; - - dev_dbg(ap->dev, "ATAPI: host_stat=0x%x\n", host_stat); - - return host_stat; -} - -/** - * bfin_data_xfer - Transfer data by PIO - * @qc: queued command - * @buf: data buffer - * @buflen: buffer length - * @write_data: read/write - * - * Note: Original code is ata_sff_data_xfer(). - */ - -static unsigned int bfin_data_xfer(struct ata_queued_cmd *qc, - unsigned char *buf, - unsigned int buflen, int rw) -{ - struct ata_port *ap = qc->dev->link->ap; - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - unsigned int words = buflen >> 1; - unsigned short *buf16 = (u16 *)buf; - - /* Transfer multiple of 2 bytes */ - if (rw == READ) - read_atapi_data(base, words, buf16); - else - write_atapi_data(base, words, buf16); - - /* Transfer trailing 1 byte, if any. */ - if (unlikely(buflen & 0x01)) { - unsigned short align_buf[1] = { 0 }; - unsigned char *trailing_buf = buf + buflen - 1; - - if (rw == READ) { - read_atapi_data(base, 1, align_buf); - memcpy(trailing_buf, align_buf, 1); - } else { - memcpy(align_buf, trailing_buf, 1); - write_atapi_data(base, 1, align_buf); - } - words++; - } - - return words << 1; -} - -/** - * bfin_irq_clear - Clear ATAPI interrupt. - * @ap: Port associated with this ATA transaction. - * - * Note: Original code is ata_bmdma_irq_clear(). - */ - -static void bfin_irq_clear(struct ata_port *ap) -{ - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - - dev_dbg(ap->dev, "in atapi irq clear\n"); - ATAPI_SET_INT_STATUS(base, ATAPI_GET_INT_STATUS(base)|ATAPI_DEV_INT - | MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT - | MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT); -} - -/** - * bfin_thaw - Thaw DMA controller port - * @ap: port to thaw - * - * Note: Original code is ata_sff_thaw(). - */ - -void bfin_thaw(struct ata_port *ap) -{ - dev_dbg(ap->dev, "in atapi dma thaw\n"); - bfin_check_status(ap); - ata_sff_irq_on(ap); -} - -/** - * bfin_postreset - standard postreset callback - * @ap: the target ata_port - * @classes: classes of attached devices - * - * Note: Original code is ata_sff_postreset(). - */ - -static void bfin_postreset(struct ata_link *link, unsigned int *classes) -{ - struct ata_port *ap = link->ap; - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - - /* re-enable interrupts */ - ata_sff_irq_on(ap); - - /* is double-select really necessary? */ - if (classes[0] != ATA_DEV_NONE) - bfin_dev_select(ap, 1); - if (classes[1] != ATA_DEV_NONE) - bfin_dev_select(ap, 0); - - /* bail out if no device is present */ - if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { - return; - } - - /* set up device control */ - write_atapi_register(base, ATA_REG_CTRL, ap->ctl); -} - -static void bfin_port_stop(struct ata_port *ap) -{ - dev_dbg(ap->dev, "in atapi port stop\n"); - if (ap->udma_mask != 0 || ap->mwdma_mask != 0) { - dma_free_coherent(ap->dev, - BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array), - ap->bmdma_prd, - ap->bmdma_prd_dma); - - free_dma(CH_ATAPI_RX); - free_dma(CH_ATAPI_TX); - } -} - -static int bfin_port_start(struct ata_port *ap) -{ - dev_dbg(ap->dev, "in atapi port start\n"); - if (!(ap->udma_mask || ap->mwdma_mask)) - return 0; - - ap->bmdma_prd = dma_alloc_coherent(ap->dev, - BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array), - &ap->bmdma_prd_dma, - GFP_KERNEL); - - if (ap->bmdma_prd == NULL) { - dev_info(ap->dev, "Unable to allocate DMA descriptor array.\n"); - goto out; - } - - if (request_dma(CH_ATAPI_RX, "BFIN ATAPI RX DMA") >= 0) { - if (request_dma(CH_ATAPI_TX, - "BFIN ATAPI TX DMA") >= 0) - return 0; - - free_dma(CH_ATAPI_RX); - dma_free_coherent(ap->dev, - BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array), - ap->bmdma_prd, - ap->bmdma_prd_dma); - } - -out: - ap->udma_mask = 0; - ap->mwdma_mask = 0; - dev_err(ap->dev, "Unable to request ATAPI DMA!" - " Continue in PIO mode.\n"); - - return 0; -} - -static unsigned int bfin_ata_host_intr(struct ata_port *ap, - struct ata_queued_cmd *qc) -{ - struct ata_eh_info *ehi = &ap->link.eh_info; - u8 status, host_stat = 0; - - VPRINTK("ata%u: protocol %d task_state %d\n", - ap->print_id, qc->tf.protocol, ap->hsm_task_state); - - /* Check whether we are expecting interrupt in this state */ - switch (ap->hsm_task_state) { - case HSM_ST_FIRST: - /* Some pre-ATAPI-4 devices assert INTRQ - * at this state when ready to receive CDB. - */ - - /* Check the ATA_DFLAG_CDB_INTR flag is enough here. - * The flag was turned on only for atapi devices. - * No need to check is_atapi_taskfile(&qc->tf) again. - */ - if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - goto idle_irq; - break; - case HSM_ST_LAST: - if (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATAPI_PROT_DMA) { - /* check status of DMA engine */ - host_stat = ap->ops->bmdma_status(ap); - VPRINTK("ata%u: host_stat 0x%X\n", - ap->print_id, host_stat); - - /* if it's not our irq... */ - if (!(host_stat & ATA_DMA_INTR)) - goto idle_irq; - - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - if (unlikely(host_stat & ATA_DMA_ERR)) { - /* error when transferring data to/from memory */ - qc->err_mask |= AC_ERR_HOST_BUS; - ap->hsm_task_state = HSM_ST_ERR; - } - } - break; - case HSM_ST: - break; - default: - goto idle_irq; - } - - /* check altstatus */ - status = ap->ops->sff_check_altstatus(ap); - if (status & ATA_BUSY) - goto busy_ata; - - /* check main status, clearing INTRQ */ - status = ap->ops->sff_check_status(ap); - if (unlikely(status & ATA_BUSY)) - goto busy_ata; - - /* ack bmdma irq events */ - ap->ops->sff_irq_clear(ap); - - ata_sff_hsm_move(ap, qc, status, 0); - - if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATAPI_PROT_DMA)) - ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat); - -busy_ata: - return 1; /* irq handled */ - -idle_irq: - ap->stats.idle_irq++; - -#ifdef ATA_IRQ_TRAP - if ((ap->stats.idle_irq % 1000) == 0) { - ap->ops->irq_ack(ap, 0); /* debug trap */ - ata_port_warn(ap, "irq trap\n"); - return 1; - } -#endif - return 0; /* irq not handled */ -} - -static irqreturn_t bfin_ata_interrupt(int irq, void *dev_instance) -{ - struct ata_host *host = dev_instance; - unsigned int i; - unsigned int handled = 0; - unsigned long flags; - - /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ - spin_lock_irqsave(&host->lock, flags); - - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap = host->ports[i]; - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->link.active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) - handled |= bfin_ata_host_intr(ap, qc); - } - - spin_unlock_irqrestore(&host->lock, flags); - - return IRQ_RETVAL(handled); -} - - -static struct scsi_host_template bfin_sht = { - ATA_BASE_SHT(DRV_NAME), - .sg_tablesize = BFIN_MAX_SG_SEGMENTS, - .dma_boundary = ATA_DMA_BOUNDARY, -}; - -static struct ata_port_operations bfin_pata_ops = { - .inherits = &ata_bmdma_port_ops, - - .set_piomode = bfin_set_piomode, - .set_dmamode = bfin_set_dmamode, - - .sff_tf_load = bfin_tf_load, - .sff_tf_read = bfin_tf_read, - .sff_exec_command = bfin_exec_command, - .sff_check_status = bfin_check_status, - .sff_check_altstatus = bfin_check_altstatus, - .sff_dev_select = bfin_dev_select, - .sff_set_devctl = bfin_set_devctl, - - .bmdma_setup = bfin_bmdma_setup, - .bmdma_start = bfin_bmdma_start, - .bmdma_stop = bfin_bmdma_stop, - .bmdma_status = bfin_bmdma_status, - .sff_data_xfer = bfin_data_xfer, - - .qc_prep = ata_noop_qc_prep, - - .thaw = bfin_thaw, - .softreset = bfin_softreset, - .postreset = bfin_postreset, - - .sff_irq_clear = bfin_irq_clear, - - .port_start = bfin_port_start, - .port_stop = bfin_port_stop, -}; - -static struct ata_port_info bfin_port_info[] = { - { - .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = ATA_PIO4, - .mwdma_mask = 0, - .udma_mask = 0, - .port_ops = &bfin_pata_ops, - }, -}; - -/** - * bfin_reset_controller - initialize BF54x ATAPI controller. - */ - -static int bfin_reset_controller(struct ata_host *host) -{ - void __iomem *base = (void __iomem *)host->ports[0]->ioaddr.ctl_addr; - int count; - unsigned short status; - - /* Disable all ATAPI interrupts */ - ATAPI_SET_INT_MASK(base, 0); - SSYNC(); - - /* Assert the RESET signal 25us*/ - ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | DEV_RST); - udelay(30); - - /* Negate the RESET signal for 2ms*/ - ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) & ~DEV_RST); - msleep(2); - - /* Wait on Busy flag to clear */ - count = 10000000; - do { - status = read_atapi_register(base, ATA_REG_STATUS); - } while (--count && (status & ATA_BUSY)); - - /* Enable only ATAPI Device interrupt */ - ATAPI_SET_INT_MASK(base, 1); - SSYNC(); - - return (!count); -} - -/** - * atapi_io_port - define atapi peripheral port pins. - */ -static unsigned short atapi_io_port[] = { - P_ATAPI_RESET, - P_ATAPI_DIOR, - P_ATAPI_DIOW, - P_ATAPI_CS0, - P_ATAPI_CS1, - P_ATAPI_DMACK, - P_ATAPI_DMARQ, - P_ATAPI_INTRQ, - P_ATAPI_IORDY, - P_ATAPI_D0A, - P_ATAPI_D1A, - P_ATAPI_D2A, - P_ATAPI_D3A, - P_ATAPI_D4A, - P_ATAPI_D5A, - P_ATAPI_D6A, - P_ATAPI_D7A, - P_ATAPI_D8A, - P_ATAPI_D9A, - P_ATAPI_D10A, - P_ATAPI_D11A, - P_ATAPI_D12A, - P_ATAPI_D13A, - P_ATAPI_D14A, - P_ATAPI_D15A, - P_ATAPI_A0A, - P_ATAPI_A1A, - P_ATAPI_A2A, - 0 -}; - -/** - * bfin_atapi_probe - attach a bfin atapi interface - * @pdev: platform device - * - * Register a bfin atapi interface. - * - * - * Platform devices are expected to contain 2 resources per port: - * - * - I/O Base (IORESOURCE_IO) - * - IRQ (IORESOURCE_IRQ) - * - */ -static int bfin_atapi_probe(struct platform_device *pdev) -{ - int board_idx = 0; - struct resource *res; - struct ata_host *host; - unsigned int fsclk = get_sclk(); - int udma_mode = 5; - const struct ata_port_info *ppi[] = - { &bfin_port_info[board_idx], NULL }; - - /* - * Simple resource validation .. - */ - if (unlikely(pdev->num_resources != 2)) { - dev_err(&pdev->dev, "invalid number of resources\n"); - return -EINVAL; - } - - /* - * Get the register base first - */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) - return -EINVAL; - - while (bfin_port_info[board_idx].udma_mask > 0 && - udma_fsclk[udma_mode] > fsclk) { - udma_mode--; - bfin_port_info[board_idx].udma_mask >>= 1; - } - - /* - * Now that that's out of the way, wire up the port.. - */ - host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1); - if (!host) - return -ENOMEM; - - host->ports[0]->ioaddr.ctl_addr = (void *)res->start; - - if (peripheral_request_list(atapi_io_port, "atapi-io-port")) { - dev_err(&pdev->dev, "Requesting Peripherals failed\n"); - return -EFAULT; - } - - if (bfin_reset_controller(host)) { - peripheral_free_list(atapi_io_port); - dev_err(&pdev->dev, "Fail to reset ATAPI device\n"); - return -EFAULT; - } - - if (ata_host_activate(host, platform_get_irq(pdev, 0), - bfin_ata_interrupt, IRQF_SHARED, &bfin_sht) != 0) { - peripheral_free_list(atapi_io_port); - dev_err(&pdev->dev, "Fail to attach ATAPI device\n"); - return -ENODEV; - } - - return 0; -} - -/** - * bfin_atapi_remove - unplug a bfin atapi interface - * @pdev: platform device - * - * A bfin atapi device has been unplugged. Perform the needed - * cleanup. Also called on module unload for any active devices. - */ -static int bfin_atapi_remove(struct platform_device *pdev) -{ - struct ata_host *host = platform_get_drvdata(pdev); - - ata_host_detach(host); - - peripheral_free_list(atapi_io_port); - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int bfin_atapi_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct ata_host *host = platform_get_drvdata(pdev); - if (host) - return ata_host_suspend(host, state); - else - return 0; -} - -static int bfin_atapi_resume(struct platform_device *pdev) -{ - struct ata_host *host = platform_get_drvdata(pdev); - int ret; - - if (host) { - ret = bfin_reset_controller(host); - if (ret) { - printk(KERN_ERR DRV_NAME ": Error during HW init\n"); - return ret; - } - ata_host_resume(host); - } - - return 0; -} -#else -#define bfin_atapi_suspend NULL -#define bfin_atapi_resume NULL -#endif - -static struct platform_driver bfin_atapi_driver = { - .probe = bfin_atapi_probe, - .remove = bfin_atapi_remove, - .suspend = bfin_atapi_suspend, - .resume = bfin_atapi_resume, - .driver = { - .name = DRV_NAME, - }, -}; - -#define ATAPI_MODE_SIZE 10 -static char bfin_atapi_mode[ATAPI_MODE_SIZE]; - -static int __init bfin_atapi_init(void) -{ - pr_info("register bfin atapi driver\n"); - - switch(bfin_atapi_mode[0]) { - case 'p': - case 'P': - break; - case 'm': - case 'M': - bfin_port_info[0].mwdma_mask = ATA_MWDMA2; - break; - default: - bfin_port_info[0].udma_mask = ATA_UDMA5; - }; - - return platform_driver_register(&bfin_atapi_driver); -} - -static void __exit bfin_atapi_exit(void) -{ - platform_driver_unregister(&bfin_atapi_driver); -} - -module_init(bfin_atapi_init); -module_exit(bfin_atapi_exit); -/* - * ATAPI mode: - * pio/PIO - * udma/UDMA (default) - * mwdma/MWDMA - */ -module_param_string(bfin_atapi_mode, bfin_atapi_mode, ATAPI_MODE_SIZE, 0); - -MODULE_AUTHOR("Sonic Zhang "); -MODULE_DESCRIPTION("PATA driver for blackfin 54x ATAPI controller"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); -MODULE_ALIAS("platform:" DRV_NAME); -- cgit v1.2.3