From c27d88e10b24baa931f3e0b74f7d3695f422bae7 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Wed, 23 Aug 2017 09:11:00 +0300 Subject: dt-binding: net/phy: fix interrupts description Commit b053dc5a722ea (powerpc: Refactor device tree binding) split the Ethernet PHY binding documentation out of the big booting-without-of.txt file, leaving a dangling reference to "section 2" in the 'interrupts' property description. Drop that reference, and make the description look more like the rest. While at it, make the example interrupt-parent phandle look more like a real world phandle, and use an IRQ_TYPE_ macro for the 'interrupts' type. Signed-off-by: Baruch Siach Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/net/phy.txt | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index b55857696fc3..86ba72af6163 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -2,11 +2,7 @@ PHY nodes Required properties: - - interrupts : where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. + - interrupts : interrupt specifier for the sole interrupt. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. - reg : The ID number for the phy, usually a small integer @@ -56,7 +52,7 @@ Example: ethernet-phy@0 { compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22"; - interrupt-parent = <40000>; - interrupts = <35 1>; + interrupt-parent = <&PIC>; + interrupts = <35 IRQ_TYPE_EDGE_RISING>; reg = <0>; }; -- cgit v1.2.3