From d7857e4ee1ba69732b16c73b2f2dde83ecd78ee4 Mon Sep 17 00:00:00 2001 From: Alexandru Tachici Date: Fri, 20 Dec 2019 12:07:19 +0200 Subject: iio: adc: ad7124: Fix DT channel configuration This patch fixes device tree channel configuration. ad7124 driver reads channels configuration from the device tree. It expects to find channel specifications as child nodes. Before this patch ad7124 driver assumed that the child nodes are parsed by for_each_available_child_of_node in the order 0,1,2,3... This is wrong and the real order of the children can be seen by running: dtc -I fs /sys/firmware/devicetree/base on the machine. For example, running this on an rpi 3B+ yields the real children order: 4,2,0,7,5,3,1,6 Before this patch the driver assigned the channel configuration like this: - 0 <- 4 - 1 <- 2 - 2 <- 0 ........ For example, the symptoms can be observed by connecting the 4th channel to a 1V tension and then reading the in_voltage0-voltage19_raw sysfs (multiplied of course by the scale) one would see that channel 0 measures 1V and channel 4 measures only noise. Now the driver uses the reg property of each child in order to correctly identify to which channel the parsed configuration belongs to. Fixes b3af341bbd966: ("iio: adc: Add ad7124 support") Signed-off-by: Alexandru Tachici Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/adc/ad7124.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c index 3f03abf100b5..306bf15023a7 100644 --- a/drivers/iio/adc/ad7124.c +++ b/drivers/iio/adc/ad7124.c @@ -494,13 +494,11 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev, st->channel_config[channel].buf_negative = of_property_read_bool(child, "adi,buffered-negative"); - *chan = ad7124_channel_template; - chan->address = channel; - chan->scan_index = channel; - chan->channel = ain[0]; - chan->channel2 = ain[1]; - - chan++; + chan[channel] = ad7124_channel_template; + chan[channel].address = channel; + chan[channel].scan_index = channel; + chan[channel].channel = ain[0]; + chan[channel].channel2 = ain[1]; } return 0; -- cgit v1.2.3 From fb4fbc8904e786537e29329d791147389e1465a2 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Mon, 16 Dec 2019 13:41:20 +0100 Subject: iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID At the moment, attempting to probe a device with ST_LSM6DS3_ID (e.g. using the st,lsm6ds3 compatible) fails with: st_lsm6dsx_i2c 1-006b: unsupported whoami [69] ... even though 0x69 is the whoami listed for ST_LSM6DS3_ID. This happens because st_lsm6dsx_check_whoami() also attempts to match unspecified (zero-initialized) entries in the "id" array. ST_LSM6DS3_ID = 0 will therefore match any entry in st_lsm6dsx_sensor_settings (here: the first), because none of them actually have all 12 entries listed in the "id" array. Avoid this by additionally checking if "name" is set, which is only set for valid entries in the "id" array. Note: Although the problem was introduced earlier it did not surface until commit 52f4b1f19679 ("iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1") because ST_LSM6DS3_ID was the first entry in st_lsm6dsx_sensor_settings. Fixes: d068e4a0f921 ("iio: imu: st_lsm6dsx: add support to multiple devices with the same settings") Cc: # 5.4 Acked-by: Lorenzo Bianconi Signed-off-by: Stephan Gerhold Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index a7d40c02ce6b..b921dd9e108f 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -1301,7 +1301,8 @@ static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw, int id, for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_sensor_settings); i++) { for (j = 0; j < ST_LSM6DSX_MAX_ID; j++) { - if (id == st_lsm6dsx_sensor_settings[i].id[j].hw_id) + if (st_lsm6dsx_sensor_settings[i].id[j].name && + id == st_lsm6dsx_sensor_settings[i].id[j].hw_id) break; } if (j < ST_LSM6DSX_MAX_ID) -- cgit v1.2.3 From 217afe63ccf445fc220e5ef480683607b05c0aa5 Mon Sep 17 00:00:00 2001 From: Tomasz Duszynski Date: Fri, 13 Dec 2019 22:38:08 +0100 Subject: iio: chemical: pms7003: fix unmet triggered buffer dependency IIO triggered buffer depends on IIO buffer which is missing from Kconfig file. This should go unnoticed most of the time because there's a chance something else has already enabled buffers. In some rare cases though one might experience kbuild warnings about unmet direct dependencies and build failures due to missing symbols. Fix this by selecting IIO_BUFFER explicitly. Signed-off-by: Tomasz Duszynski Fixes: a1d642266c14 ("iio: chemical: add support for Plantower PMS7003 sensor") Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/chemical/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig index fa4586037bb8..0b91de4df8f4 100644 --- a/drivers/iio/chemical/Kconfig +++ b/drivers/iio/chemical/Kconfig @@ -65,6 +65,7 @@ config IAQCORE config PMS7003 tristate "Plantower PMS7003 particulate matter sensor" depends on SERIAL_DEV_BUS + select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say Y here to build support for the Plantower PMS7003 particulate -- cgit v1.2.3 From 883f616530692d81cb70f8a32d85c0d2afc05f69 Mon Sep 17 00:00:00 2001 From: Lars Möllendorf Date: Fri, 13 Dec 2019 14:50:55 +0100 Subject: iio: buffer: align the size of scan bytes to size of the largest element MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Previous versions of `iio_compute_scan_bytes` only aligned each element to its own length (i.e. its own natural alignment). Because multiple consecutive sets of scan elements are buffered this does not work in case the computed scan bytes do not align with the natural alignment of the first scan element in the set. This commit fixes this by aligning the scan bytes to the natural alignment of the largest scan element in the set. Fixes: 959d2952d124 ("staging:iio: make iio_sw_buffer_preenable much more general.") Signed-off-by: Lars Möllendorf Reviewed-by: Lars-Peter Clausen Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/industrialio-buffer.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c index c193d64e5217..112225c0e486 100644 --- a/drivers/iio/industrialio-buffer.c +++ b/drivers/iio/industrialio-buffer.c @@ -566,7 +566,7 @@ static int iio_compute_scan_bytes(struct iio_dev *indio_dev, const unsigned long *mask, bool timestamp) { unsigned bytes = 0; - int length, i; + int length, i, largest = 0; /* How much space will the demuxed element take? */ for_each_set_bit(i, mask, @@ -574,13 +574,17 @@ static int iio_compute_scan_bytes(struct iio_dev *indio_dev, length = iio_storage_bytes_for_si(indio_dev, i); bytes = ALIGN(bytes, length); bytes += length; + largest = max(largest, length); } if (timestamp) { length = iio_storage_bytes_for_timestamp(indio_dev); bytes = ALIGN(bytes, length); bytes += length; + largest = max(largest, length); } + + bytes = ALIGN(bytes, largest); return bytes; } -- cgit v1.2.3 From bc80573ea25bb033a58da81b3ce27205b97c088e Mon Sep 17 00:00:00 2001 From: Guido Günther Date: Fri, 27 Dec 2019 11:22:54 +0100 Subject: iio: light: vcnl4000: Fix scale for vcnl4040 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to the data sheet the ambient sensor's scale is 0.12 lux/step (not 0.024 lux/step as used by vcnl4200) when the integration time is 80ms. The integration time is currently hardcoded in the driver to that value. See p. 8 in https://www.vishay.com/docs/84307/designingvcnl4040.pdf Fixes: 5a441aade5b3 ("iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor") Signed-off-by: Guido Günther Reviewed-by: Marco Felsch Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/light/vcnl4000.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c index 16dacea9eadf..b0e241aaefb4 100644 --- a/drivers/iio/light/vcnl4000.c +++ b/drivers/iio/light/vcnl4000.c @@ -163,7 +163,6 @@ static int vcnl4200_init(struct vcnl4000_data *data) if (ret < 0) return ret; - data->al_scale = 24000; data->vcnl4200_al.reg = VCNL4200_AL_DATA; data->vcnl4200_ps.reg = VCNL4200_PS_DATA; switch (id) { @@ -172,11 +171,13 @@ static int vcnl4200_init(struct vcnl4000_data *data) /* show 54ms in total. */ data->vcnl4200_al.sampling_rate = ktime_set(0, 54000 * 1000); data->vcnl4200_ps.sampling_rate = ktime_set(0, 4200 * 1000); + data->al_scale = 24000; break; case VCNL4040_PROD_ID: /* Integration time is 80ms, add 10ms. */ data->vcnl4200_al.sampling_rate = ktime_set(0, 100000 * 1000); data->vcnl4200_ps.sampling_rate = ktime_set(0, 100000 * 1000); + data->al_scale = 120000; break; } data->vcnl4200_al.last_measurement = ktime_set(0, 0); -- cgit v1.2.3 From 01e20b664f808a4f3048ca3f930911fd257209bd Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Tue, 14 Jan 2020 18:25:31 +0000 Subject: staging: comedi: ni_routes: fix null dereference in ni_find_route_source() In `ni_find_route_source()`, `tables->route_values` gets dereferenced. However it is possible that `tables->route_values` is `NULL`, leading to a null pointer dereference. `tables->route_values` will be `NULL` if the call to `ni_assign_device_routes()` during board initialization returned an error due to missing device family routing information or missing board-specific routing information. For example, there is currently no board-specific routing information provided for the PCIe-6251 board and several other boards, so those are affected by this bug. The bug is triggered when `ni_find_route_source()` is called via `ni_check_trigger_arg()` or `ni_check_trigger_arg_roffs()` when checking the arguments for setting up asynchronous commands. Fix it by returning `-EINVAL` if `tables->route_values` is `NULL`. Even with this fix, setting up asynchronous commands to use external trigger sources for boards with missing routing information will still fail gracefully. Since `ni_find_route_source()` only depends on the device family routing information, it would be better if that was made available even if the board-specific routing information is missing. That will be addressed by another patch. Fixes: 4bb90c87abbe ("staging: comedi: add interface to ni routing table information") Cc: # 4.20+ Cc: Spencer E. Olson Signed-off-by: Ian Abbott Link: https://lore.kernel.org/r/20200114182532.132058-2-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_routes.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/staging/comedi/drivers/ni_routes.c b/drivers/staging/comedi/drivers/ni_routes.c index 673d732dcb8f..9627bd1d2a78 100644 --- a/drivers/staging/comedi/drivers/ni_routes.c +++ b/drivers/staging/comedi/drivers/ni_routes.c @@ -487,6 +487,9 @@ int ni_find_route_source(const u8 src_sel_reg_value, int dest, { int src; + if (!tables->route_values) + return -EINVAL; + dest = B(dest); /* subtract NI names offset */ /* ensure we are not going to under/over run the route value table */ if (dest < 0 || dest >= NI_NUM_NAMES) -- cgit v1.2.3 From 9fea3a40f6b07de977a2783270c8c3bc82544d45 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Tue, 14 Jan 2020 18:25:32 +0000 Subject: staging: comedi: ni_routes: allow partial routing information This patch fixes a regression on setting up asynchronous commands to use external trigger sources when board-specific routing information is missing. `ni_find_device_routes()` (called via `ni_assign_device_routes()`) finds the table of register values for the device family and the set of valid routes for the specific board. If both are found, `tables->route_values` is set to point to the table of register values for the device family and `tables->valid_routes` is set to point to the list of valid routes for the specific board. If either is not found, both `tables->route_values` and `tables->valid_routes` are left set at their initial null values (initialized by `ni_assign_device_routes()`) and the function returns `-ENODATA`. Returning an error results in some routing functionality being disabled. Unfortunately, leaving `table->route_values` set to `NULL` also breaks the setting up of asynchronous commands that are configured to use external trigger sources. Calls to `ni_check_trigger_arg()` or `ni_check_trigger_arg_roffs()` while checking the asynchronous command set-up would result in a null pointer dereference if `table->route_values` is `NULL`. The null pointer dereference is fixed in another patch, but it now results in failure to set up the asynchronous command. That is a regression from the behavior prior to commit 347e244884c3 ("staging: comedi: tio: implement global tio/ctr routing") and commit 56d0b826d39f ("staging: comedi: ni_mio_common: implement new routing for TRIG_EXT"). Change `ni_find_device_routes()` to set `tables->route_values` and/or `tables->valid_routes` to valid information even if the other one can only be set to `NULL` due to missing information. The function will still return an error in that case. This should result in `tables->valid_routes` being valid for all currently supported device families even if the board-specific routing information is missing. That should be enough to fix the regression on setting up asynchronous commands to use external triggers for boards with missing routing information. Fixes: 347e244884c3 ("staging: comedi: tio: implement global tio/ctr routing") Fixes: 56d0b826d39f ("staging: comedi: ni_mio_common: implement new routing for TRIG_EXT"). Cc: # 4.20+ Cc: Spencer E. Olson Signed-off-by: Ian Abbott Link: https://lore.kernel.org/r/20200114182532.132058-3-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_routes.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_routes.c b/drivers/staging/comedi/drivers/ni_routes.c index 9627bd1d2a78..8f398b30f5bf 100644 --- a/drivers/staging/comedi/drivers/ni_routes.c +++ b/drivers/staging/comedi/drivers/ni_routes.c @@ -72,9 +72,6 @@ static int ni_find_device_routes(const char *device_family, } } - if (!rv) - return -ENODATA; - /* Second, find the set of routes valid for this device. */ for (i = 0; ni_device_routes_list[i]; ++i) { if (memcmp(ni_device_routes_list[i]->device, board_name, @@ -84,12 +81,12 @@ static int ni_find_device_routes(const char *device_family, } } - if (!dr) - return -ENODATA; - tables->route_values = rv; tables->valid_routes = dr; + if (!rv || !dr) + return -ENODATA; + return 0; } -- cgit v1.2.3