From beff053c0ef6983897e3481169292e6435ef0a2d Mon Sep 17 00:00:00 2001 From: Matthias Reichl Date: Wed, 27 Apr 2016 15:26:52 +0200 Subject: ASoC: bcm2835: Add S16_LE support via packed DMA transfers The bcm2835-i2s driver already has support for the S16_LE format but that format hasn't been made available because dmaengine_pcm didn't support packed data transfers. bcm2835-i2s needs 16-bit left+right channel data to be packed into a 32-bit word, the FIFO register is 32-bit only and doesn't support 16-bit access. Now that dmaengine_pcm supports packed transfers the format can be made available by setting the SND_DMAENGINE_PCM_DAI_FLAG_PACK flag. No further configuration is necessary: - snd_dmaengine_dai_dma_data.addr_width is already set to DMA_SLAVE_BUSWIDTH_4_BYTES to force 32-bit DMA transfers - dmaengine_pcm will pick up the S16_LE format from the DAI configuration and make it available since it's no longer masked out due to the PACK flag. - there are no further corner cases to catch in hw_params, since the channel count is fixed at 2 we always have two 16-bit stereo samples that can be transferred via 32-bit DMA Signed-off-by: Matthias Reichl Tested-by: Martin Sperl Signed-off-by: Mark Brown --- sound/soc/bcm/bcm2835-i2s.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c index a0026e2d2f0a..6ba20498202e 100644 --- a/sound/soc/bcm/bcm2835-i2s.c +++ b/sound/soc/bcm/bcm2835-i2s.c @@ -690,6 +690,15 @@ static int bcm2835_i2s_probe(struct platform_device *pdev) dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].maxburst = 2; dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].maxburst = 2; + /* + * Set the PACK flag to enable S16_LE support (2 S16_LE values + * packed into 32-bit transfers). + */ + dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].flags = + SND_DMAENGINE_PCM_DAI_FLAG_PACK; + dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].flags = + SND_DMAENGINE_PCM_DAI_FLAG_PACK; + /* BCLK ratio - use default */ dev->bclk_ratio = 0; -- cgit v1.2.3