From e3c7c1052271260955affbe65c4f328286fbe5fb Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 15 Feb 2020 15:32:41 +0900 Subject: x86/boot/build: Add cpustr.h to targets and remove clean-files Files in $(targets) are always cleaned up. Move the 'targets' assignment out of the ifdef and remove 'clean-files'. Signed-off-by: Masahiro Yamada Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/20200215063241.7437-1-masahiroy@kernel.org --- arch/x86/boot/Makefile | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index e17be90ab312..02c8d1c2f47e 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -57,11 +57,10 @@ $(obj)/cpu.o: $(obj)/cpustr.h quiet_cmd_cpustr = CPUSTR $@ cmd_cpustr = $(obj)/mkcpustr > $@ -targets += cpustr.h $(obj)/cpustr.h: $(obj)/mkcpustr FORCE $(call if_changed,cpustr) endif -clean-files += cpustr.h +targets += cpustr.h # --------------------------------------------------------------------------- -- cgit v1.2.3 From 30ce434e44d7e142e7a36c6b3eb2545adf692c67 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 15 Feb 2020 15:38:51 +0900 Subject: x86/boot/build: Make 'make bzlilo' not depend on vmlinux or $(obj)/bzImage bzlilo is an installation target because it copies files to $(INSTALL_PATH)/, then runs 'lilo'. However, arch/x86/Makefile and arch/x86/boot/Makefile have it depend on vmlinux and $(obj)/bzImage, respectively. 'make bzlilo' may update some build artifacts in the source tree. As commit 19514fc665ff ("arm, kbuild: make "make install" not depend on vmlinux") explained, this should not happen. Make 'bzlilo' not depend on any build artifact. Signed-off-by: Masahiro Yamada Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/20200215063852.8298-1-masahiroy@kernel.org --- arch/x86/Makefile | 6 +++--- arch/x86/boot/Makefile | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/Makefile b/arch/x86/Makefile index b65ec63c7db7..00e378de8bc0 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -246,7 +246,7 @@ drivers-$(CONFIG_FB) += arch/x86/video/ boot := arch/x86/boot -BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage +BOOT_TARGETS = bzdisk fdimage fdimage144 fdimage288 isoimage PHONY += bzImage $(BOOT_TARGETS) @@ -267,8 +267,8 @@ endif $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) $@ -PHONY += install -install: +PHONY += install bzlilo +install bzlilo: $(Q)$(MAKE) $(build)=$(boot) $@ PHONY += vdso_install diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index 02c8d1c2f47e..f1bf4a7e040b 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -145,7 +145,7 @@ isoimage: $(obj)/bzImage $(call cmd,genimage,isoimage,$(obj)/image.iso) @$(kecho) 'Kernel: $(obj)/image.iso is ready' -bzlilo: $(obj)/bzImage +bzlilo: if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi cat $(obj)/bzImage > $(INSTALL_PATH)/vmlinuz -- cgit v1.2.3 From 675a59b7dec6e03c5fb060f18fc25b2e56be3c7a Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 15 Feb 2020 15:38:52 +0900 Subject: x86/boot/build: Add phony targets in arch/x86/boot/Makefile to PHONY These targets are correctly added to PHONY in arch/x86/Makefile, but not in arch/x86/boot/Makefile. Thus, with a file 'install' in the top directory, 'make install' does nothing: $ touch install $ make install make[1]: 'install' is up to date. Add them to the PHONY targets in the boot Makefile too. [ bp: Massage. ] Signed-off-by: Masahiro Yamada Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/20200215063852.8298-2-masahiroy@kernel.org --- arch/x86/boot/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index f1bf4a7e040b..4c5355684321 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -128,6 +128,8 @@ quiet_cmd_genimage = GENIMAGE $3 cmd_genimage = sh $(srctree)/$(src)/genimage.sh $2 $3 $(obj)/bzImage \ $(obj)/mtools.conf '$(image_cmdline)' $(FDINITRD) +PHONY += bzdisk fdimage fdimage144 fdimage288 isoimage bzlilo install + # This requires write access to /dev/fd0 bzdisk: $(obj)/bzImage $(obj)/mtools.conf $(call cmd,genimage,bzdisk,/dev/fd0) -- cgit v1.2.3 From d6ee6529436a15a0541aff6e1697989ee7dc2c44 Mon Sep 17 00:00:00 2001 From: Fangrui Song Date: Wed, 20 May 2020 11:20:10 -0700 Subject: x86/boot: Discard .discard.unreachable for arch/x86/boot/compressed/vmlinux With commit ce5e3f909fc0 ("efi/printf: Add 64-bit and 8-bit integer support") arch/x86/boot/compressed/vmlinux may have an undesired .discard.unreachable section coming from drivers/firmware/efi/libstub/vsprintf.stub.o. That section gets generated from unreachable() annotations when CONFIG_STACK_VALIDATION is enabled. .discard.unreachable contains an R_X86_64_PC32 relocation which will be warned about by LLD: a non-SHF_ALLOC section (.discard.unreachable) is not part of the memory image, thus conceptually the distance between a non-SHF_ALLOC and a SHF_ALLOC is not a constant which can be resolved at link time: % ld.lld -m elf_x86_64 -T arch/x86/boot/compressed/vmlinux.lds ... -o arch/x86/boot/compressed/vmlinux ld.lld: warning: vsprintf.c:(.discard.unreachable+0x0): has non-ABS relocation R_X86_64_PC32 against symbol '' Reuse the DISCARDS macro which includes .discard.* to drop .discard.unreachable. [ bp: Massage and complete the commit message. ] Reported-by: kbuild test robot Signed-off-by: Fangrui Song Signed-off-by: Borislav Petkov Reviewed-by: Kees Cook Tested-by: Arvind Sankar Tested-by: Sedat Dilek Link: https://lkml.kernel.org/r/20200520182010.242489-1-maskray@google.com --- arch/x86/boot/compressed/vmlinux.lds.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/boot/compressed/vmlinux.lds.S b/arch/x86/boot/compressed/vmlinux.lds.S index 508cfa6828c5..1031af142776 100644 --- a/arch/x86/boot/compressed/vmlinux.lds.S +++ b/arch/x86/boot/compressed/vmlinux.lds.S @@ -73,4 +73,6 @@ SECTIONS #endif . = ALIGN(PAGE_SIZE); /* keep ZO size page aligned */ _end = .; + + DISCARDS } -- cgit v1.2.3 From 38f3e775e9c242f5430a9c08c11be7577f63a41c Mon Sep 17 00:00:00 2001 From: Babu Moger Date: Thu, 28 May 2020 11:08:23 -0500 Subject: x86/Kconfig: Update config and kernel doc for MPK feature on AMD AMD's next generation of EPYC processors support the MPK (Memory Protection Keys) feature. Update the dependency and documentation. Signed-off-by: Babu Moger Signed-off-by: Borislav Petkov Reviewed-by: Dave Hansen Link: https://lkml.kernel.org/r/159068199556.26992.17733929401377275140.stgit@naples-babu.amd.com --- Documentation/core-api/protection-keys.rst | 5 +++-- arch/x86/Kconfig | 4 ++-- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/Documentation/core-api/protection-keys.rst b/Documentation/core-api/protection-keys.rst index 49d9833af871..ec575e72d0b2 100644 --- a/Documentation/core-api/protection-keys.rst +++ b/Documentation/core-api/protection-keys.rst @@ -5,8 +5,9 @@ Memory Protection Keys ====================== Memory Protection Keys for Userspace (PKU aka PKEYs) is a feature -which is found on Intel's Skylake "Scalable Processor" Server CPUs. -It will be avalable in future non-server parts. +which is found on Intel's Skylake (and later) "Scalable Processor" +Server CPUs. It will be available in future non-server Intel parts +and future AMD processors. For anyone wishing to test or use this feature, it is available in Amazon's EC2 C5 instances and is known to work there using an Ubuntu diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 1d6104ea8af0..968d23f3fc16 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1887,10 +1887,10 @@ config X86_UMIP results are dummy. config X86_INTEL_MEMORY_PROTECTION_KEYS - prompt "Intel Memory Protection Keys" + prompt "Memory Protection Keys" def_bool y # Note: only available in 64-bit mode - depends on CPU_SUP_INTEL && X86_64 + depends on X86_64 && (CPU_SUP_INTEL || CPU_SUP_AMD) select ARCH_USES_HIGH_VMA_FLAGS select ARCH_HAS_PKEYS ---help--- -- cgit v1.2.3