From 4a36a60c34f42f75e8b4f8cd24fcfade26111334 Mon Sep 17 00:00:00 2001 From: Jonathan Chocron Date: Thu, 12 Sep 2019 16:00:39 +0300 Subject: PCI: Add Amazon's Annapurna Labs vendor ID Add Amazon's Annapurna Labs vendor ID to pci_ids.h. Signed-off-by: Jonathan Chocron Signed-off-by: Lorenzo Pieralisi Reviewed-by: Andrew Murray Acked-by: Bjorn Helgaas --- include/linux/pci_ids.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index c842735a4f45..5ce83544f38b 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2570,6 +2570,8 @@ #define PCI_VENDOR_ID_ASMEDIA 0x1b21 +#define PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS 0x1c36 + #define PCI_VENDOR_ID_CIRCUITCO 0x1cc8 #define PCI_SUBSYSTEM_ID_CIRCUITCO_MINNOWBOARD 0x0001 -- cgit v1.2.3 From 76e67e9e0f0f2debf9df192502a759bdd0cb4dab Mon Sep 17 00:00:00 2001 From: Ali Saidi Date: Thu, 12 Sep 2019 16:00:40 +0300 Subject: PCI: Add ACS quirk for Amazon Annapurna Labs root ports The Amazon's Annapurna Labs root ports don't advertise an ACS capability, but they don't allow peer-to-peer transactions and do validate bus numbers through the SMMU. Additionally, it's not possible for one RP to pass traffic to another RP. Signed-off-by: Ali Saidi Signed-off-by: Jonathan Chocron Signed-off-by: Lorenzo Pieralisi Reviewed-by: Gustavo Pimentel Reviewed-by: Andrew Murray Acked-by: Bjorn Helgaas --- drivers/pci/quirks.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 208aacf39329..e96c03b4e494 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -4366,6 +4366,24 @@ static int pci_quirk_qcom_rp_acs(struct pci_dev *dev, u16 acs_flags) return ret; } +static int pci_quirk_al_acs(struct pci_dev *dev, u16 acs_flags) +{ + if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) + return -ENOTTY; + + /* + * Amazon's Annapurna Labs root ports don't include an ACS capability, + * but do include ACS-like functionality. The hardware doesn't support + * peer-to-peer transactions via the root port and each has a unique + * segment number. + * + * Additionally, the root ports cannot send traffic to each other. + */ + acs_flags &= ~(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); + + return acs_flags ? 0 : 1; +} + /* * Sunrise Point PCH root ports implement ACS, but unfortunately as shown in * the datasheet (Intel 100 Series Chipset Family PCH Datasheet, Vol. 2, @@ -4559,6 +4577,8 @@ static const struct pci_dev_acs_enabled { { PCI_VENDOR_ID_AMPERE, 0xE00A, pci_quirk_xgene_acs }, { PCI_VENDOR_ID_AMPERE, 0xE00B, pci_quirk_xgene_acs }, { PCI_VENDOR_ID_AMPERE, 0xE00C, pci_quirk_xgene_acs }, + /* Amazon Annapurna Labs */ + { PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, pci_quirk_al_acs }, { 0 } }; -- cgit v1.2.3 From a638b5de205af40bdadd867b1cb77320bbb2628e Mon Sep 17 00:00:00 2001 From: Jonathan Chocron Date: Thu, 12 Sep 2019 16:00:41 +0300 Subject: PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port The Amazon Annapurna Labs PCIe Root Port exposes the VPD capability, but there is no actual support for it. Trying to access the VPD (for example, as part of lspci -vv or when reading the vpd sysfs file), results in the following warning print: pcieport 0001:00:00.0: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update Signed-off-by: Jonathan Chocron Signed-off-by: Lorenzo Pieralisi Reviewed-by: Gustavo Pimentel Reviewed-by: Andrew Murray Acked-by: Bjorn Helgaas --- drivers/pci/vpd.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c index 4963c2e2bd4c..7915d10f9aa1 100644 --- a/drivers/pci/vpd.c +++ b/drivers/pci/vpd.c @@ -571,6 +571,12 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID, quirk_blacklist_vpd); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_QLOGIC, 0x2261, quirk_blacklist_vpd); +/* + * The Amazon Annapurna Labs 0x0031 device id is reused for other non Root Port + * device types, so the quirk is registered for the PCI_CLASS_BRIDGE_PCI class. + */ +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, + PCI_CLASS_BRIDGE_PCI, 8, quirk_blacklist_vpd); /* * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the -- cgit v1.2.3 From 738cb37b013e5ba6abd725a22abbd8baebc95082 Mon Sep 17 00:00:00 2001 From: Jonathan Chocron Date: Thu, 12 Sep 2019 16:00:42 +0300 Subject: PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port The Root Port (identified by [1c36:0031]) doesn't support MSI-X. On some platforms it is configured to not advertise the capability at all, while on others it (mistakenly) does. This causes a panic during initialization by the pcieport driver, since it tries to configure the MSI-X capability. Specifically, when trying to access the MSI-X table a "non-existing addr" exception occurs. Example stacktrace snippet: SError Interrupt on CPU2, code 0xbf000000 -- SError CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 Hardware name: Annapurna Labs Alpine V3 EVP (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : __pci_enable_msix_range+0x4e4/0x608 lr : __pci_enable_msix_range+0x498/0x608 sp : ffffff80117db700 x29: ffffff80117db700 x28: 0000000000000001 x27: 0000000000000001 x26: 0000000000000000 x25: ffffffd3e9d8c0b0 x24: 0000000000000000 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001 x20: 0000000000000000 x19: ffffffd3e9d8c000 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffffff80116496c8 x14: ffffffd3e9844503 x13: ffffffd3e9844502 x12: 0000000000000038 x11: ffffffffffffff00 x10: 0000000000000040 x9 : ffffff801165e270 x8 : ffffff801165e268 x7 : 0000000000000002 x6 : 00000000000000b2 x5 : ffffffd3e9d8c2c0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffd3e9844680 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 Hardware name: Annapurna Labs Alpine V3 EVP (DT) Call trace: dump_backtrace+0x0/0x140 show_stack+0x14/0x20 dump_stack+0xa8/0xcc panic+0x140/0x334 nmi_panic+0x6c/0x70 arm64_serror_panic+0x74/0x88 __pte_error+0x0/0x28 el1_error+0x84/0xf8 __pci_enable_msix_range+0x4e4/0x608 pci_alloc_irq_vectors_affinity+0xdc/0x150 pcie_port_device_register+0x2b8/0x4e0 pcie_portdrv_probe+0x34/0xf0 Notice that this quirk also disables MSI (which may work, but hasn't been tested nor has a current use case), since currently there is no standard way to disable only MSI-X. Signed-off-by: Jonathan Chocron Signed-off-by: Lorenzo Pieralisi Reviewed-by: Gustavo Pimentel Reviewed-by: Andrew Murray --- drivers/pci/quirks.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index e96c03b4e494..44524d351a26 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2925,6 +2925,24 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1, quirk_msi_intx_disable_qca_bug); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091, quirk_msi_intx_disable_qca_bug); + +/* + * Amazon's Annapurna Labs 1c36:0031 Root Ports don't support MSI-X, so it + * should be disabled on platforms where the device (mistakenly) advertises it. + * + * Notice that this quirk also disables MSI (which may work, but hasn't been + * tested), since currently there is no standard way to disable only MSI-X. + * + * The 0031 device id is reused for other non Root Port device types, + * therefore the quirk is registered for the PCI_CLASS_BRIDGE_PCI class. + */ +static void quirk_al_msi_disable(struct pci_dev *dev) +{ + dev->no_msi = 1; + pci_warn(dev, "Disabling MSI/MSI-X\n"); +} +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, + PCI_CLASS_BRIDGE_PCI, 8, quirk_al_msi_disable); #endif /* CONFIG_PCI_MSI */ /* -- cgit v1.2.3 From ed4381da34d4765626aefc9b9ef084cd8e6bb749 Mon Sep 17 00:00:00 2001 From: Jonathan Chocron Date: Thu, 12 Sep 2019 16:02:36 +0300 Subject: dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding Document Amazon's Annapurna Labs PCIe host bridge. Signed-off-by: Jonathan Chocron Signed-off-by: Lorenzo Pieralisi Reviewed-by: Andrew Murray Reviewed-by: Rob Herring --- Documentation/devicetree/bindings/pci/pcie-al.txt | 46 +++++++++++++++++++++++ MAINTAINERS | 3 +- 2 files changed, 48 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/pci/pcie-al.txt diff --git a/Documentation/devicetree/bindings/pci/pcie-al.txt b/Documentation/devicetree/bindings/pci/pcie-al.txt new file mode 100644 index 000000000000..557a5089229d --- /dev/null +++ b/Documentation/devicetree/bindings/pci/pcie-al.txt @@ -0,0 +1,46 @@ +* Amazon Annapurna Labs PCIe host bridge + +Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys DesignWare +PCI core. It inherits common properties defined in +Documentation/devicetree/bindings/pci/designware-pcie.txt. + +Properties of the host controller node that differ from it are: + +- compatible: + Usage: required + Value type: + Definition: Value should contain + - "amazon,al-alpine-v2-pcie" for alpine_v2 + - "amazon,al-alpine-v3-pcie" for alpine_v3 + +- reg: + Usage: required + Value type: + Definition: Register ranges as listed in the reg-names property + +- reg-names: + Usage: required + Value type: + Definition: Must include the following entries + - "config" PCIe ECAM space + - "controller" AL proprietary registers + - "dbi" Designware PCIe registers + +Example: + + pcie-external0: pcie@fb600000 { + compatible = "amazon,al-alpine-v3-pcie"; + reg = <0x0 0xfb600000 0x0 0x00100000 + 0x0 0xfd800000 0x0 0x00010000 + 0x0 0xfd810000 0x0 0x00001000>; + reg-names = "config", "controller", "dbi"; + bus-range = <0 255>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = ; + interrupt-map-mask = <0x00 0 0 7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; /* INTa */ + ranges = <0x02000000 0x0 0xc0010000 0x0 0xc0010000 0x0 0x07ff0000>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 783569e3c4b4..d200b16fa95c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12448,10 +12448,11 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/pci.git/ S: Supported F: drivers/pci/controller/ -PCIE DRIVER FOR ANNAPURNA LABS +PCIE DRIVER FOR AMAZON ANNAPURNA LABS M: Jonathan Chocron L: linux-pci@vger.kernel.org S: Maintained +F: Documentation/devicetree/bindings/pci/pcie-al.txt F: drivers/pci/controller/dwc/pcie-al.c PCIE DRIVER FOR AMLOGIC MESON -- cgit v1.2.3 From a8daea94754989f6c48dafda840482cbc9f882f9 Mon Sep 17 00:00:00 2001 From: Jonathan Chocron Date: Thu, 12 Sep 2019 16:02:37 +0300 Subject: PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver This driver is DT based and utilizes the DesignWare APIs. It allows using a smaller ECAM range for a larger bus range - usually an entire bus uses 1MB of address space, but the driver can use it for a larger number of buses. This is achieved by using a HW mechanism which allows changing the BUS part of the "final" outgoing config transaction. There are 2 HW regs, one which is basically a bitmask determining which bits to take from the AXI transaction itself and another which holds the complementary part programmed by the driver. All link initializations are handled by the boot FW. Signed-off-by: Jonathan Chocron Signed-off-by: Lorenzo Pieralisi Reviewed-by: Gustavo Pimentel Reviewed-by: Andrew Murray --- drivers/pci/controller/dwc/Kconfig | 12 ++ drivers/pci/controller/dwc/pcie-al.c | 365 +++++++++++++++++++++++++++++++++++ 2 files changed, 377 insertions(+) diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig index 6ea778ae4877..3c6094cbcc3b 100644 --- a/drivers/pci/controller/dwc/Kconfig +++ b/drivers/pci/controller/dwc/Kconfig @@ -230,4 +230,16 @@ config PCIE_UNIPHIER Say Y here if you want PCIe controller support on UniPhier SoCs. This driver supports LD20 and PXs3 SoCs. +config PCIE_AL + bool "Amazon Annapurna Labs PCIe controller" + depends on OF && (ARM64 || COMPILE_TEST) + depends on PCI_MSI_IRQ_DOMAIN + select PCIE_DW_HOST + help + Say Y here to enable support of the Amazon's Annapurna Labs PCIe + controller IP on Amazon SoCs. The PCIe controller uses the DesignWare + core plus Annapurna Labs proprietary hardware wrappers. This is + required only for DT-based platforms. ACPI platforms with the + Annapurna Labs PCIe controller don't need to enable this. + endmenu diff --git a/drivers/pci/controller/dwc/pcie-al.c b/drivers/pci/controller/dwc/pcie-al.c index 3ab58f0584a8..1eeda2f6371f 100644 --- a/drivers/pci/controller/dwc/pcie-al.c +++ b/drivers/pci/controller/dwc/pcie-al.c @@ -91,3 +91,368 @@ struct pci_ecam_ops al_pcie_ops = { }; #endif /* defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) */ + +#ifdef CONFIG_PCIE_AL + +#include +#include "pcie-designware.h" + +#define AL_PCIE_REV_ID_2 2 +#define AL_PCIE_REV_ID_3 3 +#define AL_PCIE_REV_ID_4 4 + +#define AXI_BASE_OFFSET 0x0 + +#define DEVICE_ID_OFFSET 0x16c + +#define DEVICE_REV_ID 0x0 +#define DEVICE_REV_ID_DEV_ID_MASK GENMASK(31, 16) + +#define DEVICE_REV_ID_DEV_ID_X4 0 +#define DEVICE_REV_ID_DEV_ID_X8 2 +#define DEVICE_REV_ID_DEV_ID_X16 4 + +#define OB_CTRL_REV1_2_OFFSET 0x0040 +#define OB_CTRL_REV3_5_OFFSET 0x0030 + +#define CFG_TARGET_BUS 0x0 +#define CFG_TARGET_BUS_MASK_MASK GENMASK(7, 0) +#define CFG_TARGET_BUS_BUSNUM_MASK GENMASK(15, 8) + +#define CFG_CONTROL 0x4 +#define CFG_CONTROL_SUBBUS_MASK GENMASK(15, 8) +#define CFG_CONTROL_SEC_BUS_MASK GENMASK(23, 16) + +struct al_pcie_reg_offsets { + unsigned int ob_ctrl; +}; + +struct al_pcie_target_bus_cfg { + u8 reg_val; + u8 reg_mask; + u8 ecam_mask; +}; + +struct al_pcie { + struct dw_pcie *pci; + void __iomem *controller_base; /* base of PCIe unit (not DW core) */ + struct device *dev; + resource_size_t ecam_size; + unsigned int controller_rev_id; + struct al_pcie_reg_offsets reg_offsets; + struct al_pcie_target_bus_cfg target_bus_cfg; +}; + +#define PCIE_ECAM_DEVFN(x) (((x) & 0xff) << 12) + +#define to_al_pcie(x) dev_get_drvdata((x)->dev) + +static inline u32 al_pcie_controller_readl(struct al_pcie *pcie, u32 offset) +{ + return readl_relaxed(pcie->controller_base + offset); +} + +static inline void al_pcie_controller_writel(struct al_pcie *pcie, u32 offset, + u32 val) +{ + writel_relaxed(val, pcie->controller_base + offset); +} + +static int al_pcie_rev_id_get(struct al_pcie *pcie, unsigned int *rev_id) +{ + u32 dev_rev_id_val; + u32 dev_id_val; + + dev_rev_id_val = al_pcie_controller_readl(pcie, AXI_BASE_OFFSET + + DEVICE_ID_OFFSET + + DEVICE_REV_ID); + dev_id_val = FIELD_GET(DEVICE_REV_ID_DEV_ID_MASK, dev_rev_id_val); + + switch (dev_id_val) { + case DEVICE_REV_ID_DEV_ID_X4: + *rev_id = AL_PCIE_REV_ID_2; + break; + case DEVICE_REV_ID_DEV_ID_X8: + *rev_id = AL_PCIE_REV_ID_3; + break; + case DEVICE_REV_ID_DEV_ID_X16: + *rev_id = AL_PCIE_REV_ID_4; + break; + default: + dev_err(pcie->dev, "Unsupported dev_id_val (0x%x)\n", + dev_id_val); + return -EINVAL; + } + + dev_dbg(pcie->dev, "dev_id_val: 0x%x\n", dev_id_val); + + return 0; +} + +static int al_pcie_reg_offsets_set(struct al_pcie *pcie) +{ + switch (pcie->controller_rev_id) { + case AL_PCIE_REV_ID_2: + pcie->reg_offsets.ob_ctrl = OB_CTRL_REV1_2_OFFSET; + break; + case AL_PCIE_REV_ID_3: + case AL_PCIE_REV_ID_4: + pcie->reg_offsets.ob_ctrl = OB_CTRL_REV3_5_OFFSET; + break; + default: + dev_err(pcie->dev, "Unsupported controller rev_id: 0x%x\n", + pcie->controller_rev_id); + return -EINVAL; + } + + return 0; +} + +static inline void al_pcie_target_bus_set(struct al_pcie *pcie, + u8 target_bus, + u8 mask_target_bus) +{ + u32 reg; + + reg = FIELD_PREP(CFG_TARGET_BUS_MASK_MASK, mask_target_bus) | + FIELD_PREP(CFG_TARGET_BUS_BUSNUM_MASK, target_bus); + + al_pcie_controller_writel(pcie, AXI_BASE_OFFSET + + pcie->reg_offsets.ob_ctrl + CFG_TARGET_BUS, + reg); +} + +static void __iomem *al_pcie_conf_addr_map(struct al_pcie *pcie, + unsigned int busnr, + unsigned int devfn) +{ + struct al_pcie_target_bus_cfg *target_bus_cfg = &pcie->target_bus_cfg; + unsigned int busnr_ecam = busnr & target_bus_cfg->ecam_mask; + unsigned int busnr_reg = busnr & target_bus_cfg->reg_mask; + struct pcie_port *pp = &pcie->pci->pp; + void __iomem *pci_base_addr; + + pci_base_addr = (void __iomem *)((uintptr_t)pp->va_cfg0_base + + (busnr_ecam << 20) + + PCIE_ECAM_DEVFN(devfn)); + + if (busnr_reg != target_bus_cfg->reg_val) { + dev_dbg(pcie->pci->dev, "Changing target bus busnum val from 0x%x to 0x%x\n", + target_bus_cfg->reg_val, busnr_reg); + target_bus_cfg->reg_val = busnr_reg; + al_pcie_target_bus_set(pcie, + target_bus_cfg->reg_val, + target_bus_cfg->reg_mask); + } + + return pci_base_addr; +} + +static int al_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, + unsigned int devfn, int where, int size, + u32 *val) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct al_pcie *pcie = to_al_pcie(pci); + unsigned int busnr = bus->number; + void __iomem *pci_addr; + int rc; + + pci_addr = al_pcie_conf_addr_map(pcie, busnr, devfn); + + rc = dw_pcie_read(pci_addr + where, size, val); + + dev_dbg(pci->dev, "%d-byte config read from %04x:%02x:%02x.%d offset 0x%x (pci_addr: 0x%px) - val:0x%x\n", + size, pci_domain_nr(bus), bus->number, + PCI_SLOT(devfn), PCI_FUNC(devfn), where, + (pci_addr + where), *val); + + return rc; +} + +static int al_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus, + unsigned int devfn, int where, int size, + u32 val) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct al_pcie *pcie = to_al_pcie(pci); + unsigned int busnr = bus->number; + void __iomem *pci_addr; + int rc; + + pci_addr = al_pcie_conf_addr_map(pcie, busnr, devfn); + + rc = dw_pcie_write(pci_addr + where, size, val); + + dev_dbg(pci->dev, "%d-byte config write to %04x:%02x:%02x.%d offset 0x%x (pci_addr: 0x%px) - val:0x%x\n", + size, pci_domain_nr(bus), bus->number, + PCI_SLOT(devfn), PCI_FUNC(devfn), where, + (pci_addr + where), val); + + return rc; +} + +static void al_pcie_config_prepare(struct al_pcie *pcie) +{ + struct al_pcie_target_bus_cfg *target_bus_cfg; + struct pcie_port *pp = &pcie->pci->pp; + unsigned int ecam_bus_mask; + u32 cfg_control_offset; + u8 subordinate_bus; + u8 secondary_bus; + u32 cfg_control; + u32 reg; + + target_bus_cfg = &pcie->target_bus_cfg; + + ecam_bus_mask = (pcie->ecam_size >> 20) - 1; + if (ecam_bus_mask > 255) { + dev_warn(pcie->dev, "ECAM window size is larger than 256MB. Cutting off at 256\n"); + ecam_bus_mask = 255; + } + + /* This portion is taken from the transaction address */ + target_bus_cfg->ecam_mask = ecam_bus_mask; + /* This portion is taken from the cfg_target_bus reg */ + target_bus_cfg->reg_mask = ~target_bus_cfg->ecam_mask; + target_bus_cfg->reg_val = pp->busn->start & target_bus_cfg->reg_mask; + + al_pcie_target_bus_set(pcie, target_bus_cfg->reg_val, + target_bus_cfg->reg_mask); + + secondary_bus = pp->busn->start + 1; + subordinate_bus = pp->busn->end; + + /* Set the valid values of secondary and subordinate buses */ + cfg_control_offset = AXI_BASE_OFFSET + pcie->reg_offsets.ob_ctrl + + CFG_CONTROL; + + cfg_control = al_pcie_controller_readl(pcie, cfg_control_offset); + + reg = cfg_control & + ~(CFG_CONTROL_SEC_BUS_MASK | CFG_CONTROL_SUBBUS_MASK); + + reg |= FIELD_PREP(CFG_CONTROL_SUBBUS_MASK, subordinate_bus) | + FIELD_PREP(CFG_CONTROL_SEC_BUS_MASK, secondary_bus); + + al_pcie_controller_writel(pcie, cfg_control_offset, reg); +} + +static int al_pcie_host_init(struct pcie_port *pp) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct al_pcie *pcie = to_al_pcie(pci); + int rc; + + rc = al_pcie_rev_id_get(pcie, &pcie->controller_rev_id); + if (rc) + return rc; + + rc = al_pcie_reg_offsets_set(pcie); + if (rc) + return rc; + + al_pcie_config_prepare(pcie); + + return 0; +} + +static const struct dw_pcie_host_ops al_pcie_host_ops = { + .rd_other_conf = al_pcie_rd_other_conf, + .wr_other_conf = al_pcie_wr_other_conf, + .host_init = al_pcie_host_init, +}; + +static int al_add_pcie_port(struct pcie_port *pp, + struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + int ret; + + pp->ops = &al_pcie_host_ops; + + ret = dw_pcie_host_init(pp); + if (ret) { + dev_err(dev, "failed to initialize host\n"); + return ret; + } + + return 0; +} + +static const struct dw_pcie_ops dw_pcie_ops = { +}; + +static int al_pcie_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *controller_res; + struct resource *ecam_res; + struct resource *dbi_res; + struct al_pcie *al_pcie; + struct dw_pcie *pci; + + al_pcie = devm_kzalloc(dev, sizeof(*al_pcie), GFP_KERNEL); + if (!al_pcie) + return -ENOMEM; + + pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL); + if (!pci) + return -ENOMEM; + + pci->dev = dev; + pci->ops = &dw_pcie_ops; + + al_pcie->pci = pci; + al_pcie->dev = dev; + + dbi_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi"); + pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_res); + if (IS_ERR(pci->dbi_base)) { + dev_err(dev, "couldn't remap dbi base %pR\n", dbi_res); + return PTR_ERR(pci->dbi_base); + } + + ecam_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config"); + if (!ecam_res) { + dev_err(dev, "couldn't find 'config' reg in DT\n"); + return -ENOENT; + } + al_pcie->ecam_size = resource_size(ecam_res); + + controller_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "controller"); + al_pcie->controller_base = devm_ioremap_resource(dev, controller_res); + if (IS_ERR(al_pcie->controller_base)) { + dev_err(dev, "couldn't remap controller base %pR\n", + controller_res); + return PTR_ERR(al_pcie->controller_base); + } + + dev_dbg(dev, "From DT: dbi_base: %pR, controller_base: %pR\n", + dbi_res, controller_res); + + platform_set_drvdata(pdev, al_pcie); + + return al_add_pcie_port(&pci->pp, pdev); +} + +static const struct of_device_id al_pcie_of_match[] = { + { .compatible = "amazon,al-alpine-v2-pcie", + }, + { .compatible = "amazon,al-alpine-v3-pcie", + }, + {}, +}; + +static struct platform_driver al_pcie_driver = { + .driver = { + .name = "al-pcie", + .of_match_table = al_pcie_of_match, + .suppress_bind_attrs = true, + }, + .probe = al_pcie_probe, +}; +builtin_platform_driver(al_pcie_driver); + +#endif /* CONFIG_PCIE_AL*/ -- cgit v1.2.3 From 0b24134f7888175c9638e6fd1900e23e44fc172f Mon Sep 17 00:00:00 2001 From: Jonathan Chocron Date: Thu, 12 Sep 2019 16:02:38 +0300 Subject: PCI: dwc: Add validation that PCIe core is set to correct mode Some PCIe controllers can be set to either Host or EP according to some early boot FW. To make sure there is no discrepancy (e.g. FW configured the port to EP mode while the DT specifies it as a host bridge or vice versa), a check has been added for each mode. Signed-off-by: Jonathan Chocron Signed-off-by: Lorenzo Pieralisi Reviewed-by: Andrew Murray Acked-by: Gustavo Pimentel --- drivers/pci/controller/dwc/pcie-designware-ep.c | 8 ++++++++ drivers/pci/controller/dwc/pcie-designware-host.c | 16 ++++++++++++++++ 2 files changed, 24 insertions(+) diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c index 2bf5a35c0570..0b9a9b27175c 100644 --- a/drivers/pci/controller/dwc/pcie-designware-ep.c +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c @@ -531,6 +531,7 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep) int ret; u32 reg; void *addr; + u8 hdr_type; unsigned int nbars; unsigned int offset; struct pci_epc *epc; @@ -595,6 +596,13 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep) if (ep->ops->ep_init) ep->ops->ep_init(ep); + hdr_type = dw_pcie_readb_dbi(pci, PCI_HEADER_TYPE); + if (hdr_type != PCI_HEADER_TYPE_NORMAL) { + dev_err(pci->dev, "PCIe controller is not set to EP mode (hdr_type:0x%x)!\n", + hdr_type); + return -EIO; + } + ret = of_property_read_u8(np, "max-functions", &epc->max_functions); if (ret < 0) epc->max_functions = 1; diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index f93252d0da5b..bb275b5e787a 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -323,6 +323,7 @@ int dw_pcie_host_init(struct pcie_port *pp) struct pci_bus *child; struct pci_host_bridge *bridge; struct resource *cfg_res; + u32 hdr_type; int ret; raw_spin_lock_init(&pci->pp.lock); @@ -464,6 +465,21 @@ int dw_pcie_host_init(struct pcie_port *pp) goto err_free_msi; } + ret = dw_pcie_rd_own_conf(pp, PCI_HEADER_TYPE, 1, &hdr_type); + if (ret != PCIBIOS_SUCCESSFUL) { + dev_err(pci->dev, "Failed reading PCI_HEADER_TYPE cfg space reg (ret: 0x%x)\n", + ret); + ret = pcibios_err_to_errno(ret); + goto err_free_msi; + } + if (hdr_type != PCI_HEADER_TYPE_BRIDGE) { + dev_err(pci->dev, + "PCIe controller is not set to bridge type (hdr_type: 0x%x)!\n", + hdr_type); + ret = -EIO; + goto err_free_msi; + } + pp->root_bus_nr = pp->busn->start; bridge->dev.parent = dev; -- cgit v1.2.3