From aae15b1453a22dde4a3623d01cfeaf5e39ac424f Mon Sep 17 00:00:00 2001 From: Martin Kaiser Date: Thu, 1 Aug 2019 17:46:21 +0200 Subject: ARM: dts: imx27 phyCARD-S: native-mode is part of display-timings Move the native-mode property inside the display-timings node. According to Documentation/devicetree/bindings/display/panel/display-timing.txt. native-mode is a property of the display-timings node. If it's located outside of display-timings, the native-mode setting is ignored and the first display timing is used (which is a problem only if someone adds another display timing). Signed-off-by: Martin Kaiser Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts index 5e5e282ed30e..0cd75dadf292 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts @@ -15,10 +15,10 @@ display: display { model = "Primeview-PD050VL1"; - native-mode = <&timing0>; bits-per-pixel = <16>; /* non-standard but required */ fsl,pcr = <0xf0c88080>; /* non-standard but required */ display-timings { + native-mode = <&timing0>; timing0: 640x480 { hactive = <640>; vactive = <480>; -- cgit v1.2.3