From eab172294d5e24464f332dd8e94a57a9819c81c4 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 29 Oct 2008 17:03:22 +0800 Subject: sched: cleanup for alloc_rt/fair_sched_group() Impact: cleanup Remove checking parent == NULL. It won't be NULLL, because we dynamically create sub task_group only, and sub task_group always has its parent. (root task_group is statically defined) Also replace kmalloc_node(GFP_ZERO) with kzalloc_node(). Signed-off-by: Li Zefan Signed-off-by: Ingo Molnar --- kernel/sched.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index e8819bc6f462..7dd6c860773b 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -8472,7 +8472,7 @@ static int alloc_fair_sched_group(struct task_group *tg, struct task_group *parent) { struct cfs_rq *cfs_rq; - struct sched_entity *se, *parent_se; + struct sched_entity *se; struct rq *rq; int i; @@ -8488,18 +8488,17 @@ int alloc_fair_sched_group(struct task_group *tg, struct task_group *parent) for_each_possible_cpu(i) { rq = cpu_rq(i); - cfs_rq = kmalloc_node(sizeof(struct cfs_rq), - GFP_KERNEL|__GFP_ZERO, cpu_to_node(i)); + cfs_rq = kzalloc_node(sizeof(struct cfs_rq), + GFP_KERNEL, cpu_to_node(i)); if (!cfs_rq) goto err; - se = kmalloc_node(sizeof(struct sched_entity), - GFP_KERNEL|__GFP_ZERO, cpu_to_node(i)); + se = kzalloc_node(sizeof(struct sched_entity), + GFP_KERNEL, cpu_to_node(i)); if (!se) goto err; - parent_se = parent ? parent->se[i] : NULL; - init_tg_cfs_entry(tg, cfs_rq, se, i, 0, parent_se); + init_tg_cfs_entry(tg, cfs_rq, se, i, 0, parent->se[i]); } return 1; @@ -8560,7 +8559,7 @@ static int alloc_rt_sched_group(struct task_group *tg, struct task_group *parent) { struct rt_rq *rt_rq; - struct sched_rt_entity *rt_se, *parent_se; + struct sched_rt_entity *rt_se; struct rq *rq; int i; @@ -8577,18 +8576,17 @@ int alloc_rt_sched_group(struct task_group *tg, struct task_group *parent) for_each_possible_cpu(i) { rq = cpu_rq(i); - rt_rq = kmalloc_node(sizeof(struct rt_rq), - GFP_KERNEL|__GFP_ZERO, cpu_to_node(i)); + rt_rq = kzalloc_node(sizeof(struct rt_rq), + GFP_KERNEL, cpu_to_node(i)); if (!rt_rq) goto err; - rt_se = kmalloc_node(sizeof(struct sched_rt_entity), - GFP_KERNEL|__GFP_ZERO, cpu_to_node(i)); + rt_se = kzalloc_node(sizeof(struct sched_rt_entity), + GFP_KERNEL, cpu_to_node(i)); if (!rt_se) goto err; - parent_se = parent ? parent->rt_se[i] : NULL; - init_tg_rt_entry(tg, rt_rq, rt_se, i, 0, parent_se); + init_tg_rt_entry(tg, rt_rq, rt_se, i, 0, parent->rt_se[i]); } return 1; -- cgit v1.2.3 From 34f3a814eef8069a24e5b3ebcf27aba9dabac2ea Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 30 Oct 2008 15:23:32 +0800 Subject: sched: switch sched_features to seqfile Impact: cleanup So handling of sched_features read is simplified. Signed-off-by: Li Zefan Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 52 ++++++++++++++++------------------------------------ 1 file changed, 16 insertions(+), 36 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 7dd6c860773b..5419df9cc5c4 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -703,45 +703,18 @@ static __read_mostly char *sched_feat_names[] = { #undef SCHED_FEAT -static int sched_feat_open(struct inode *inode, struct file *filp) +static int sched_feat_show(struct seq_file *m, void *v) { - filp->private_data = inode->i_private; - return 0; -} - -static ssize_t -sched_feat_read(struct file *filp, char __user *ubuf, - size_t cnt, loff_t *ppos) -{ - char *buf; - int r = 0; - int len = 0; int i; for (i = 0; sched_feat_names[i]; i++) { - len += strlen(sched_feat_names[i]); - len += 4; + if (!(sysctl_sched_features & (1UL << i))) + seq_puts(m, "NO_"); + seq_printf(m, "%s ", sched_feat_names[i]); } + seq_puts(m, "\n"); - buf = kmalloc(len + 2, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - for (i = 0; sched_feat_names[i]; i++) { - if (sysctl_sched_features & (1UL << i)) - r += sprintf(buf + r, "%s ", sched_feat_names[i]); - else - r += sprintf(buf + r, "NO_%s ", sched_feat_names[i]); - } - - r += sprintf(buf + r, "\n"); - WARN_ON(r >= len + 2); - - r = simple_read_from_buffer(ubuf, cnt, ppos, buf, r); - - kfree(buf); - - return r; + return 0; } static ssize_t @@ -786,10 +759,17 @@ sched_feat_write(struct file *filp, const char __user *ubuf, return cnt; } +static int sched_feat_open(struct inode *inode, struct file *filp) +{ + return single_open(filp, sched_feat_show, NULL); +} + static struct file_operations sched_feat_fops = { - .open = sched_feat_open, - .read = sched_feat_read, - .write = sched_feat_write, + .open = sched_feat_open, + .write = sched_feat_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, }; static __init int sched_init_debug(void) -- cgit v1.2.3 From 8bb8c4386d08f2cc5d871d22f220d35032213f84 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Sat, 1 Nov 2008 00:13:49 +0100 Subject: sched, ftrace: trace sched.c Impact: allow function tracing within sched.c Its useful to see what happens in sched.c. Signed-off-by: Peter Zijlstra Acked-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/Makefile | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/Makefile b/kernel/Makefile index 9a3ec66a9d84..e1af03972148 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -21,7 +21,6 @@ CFLAGS_REMOVE_mutex-debug.o = -pg CFLAGS_REMOVE_rtmutex-debug.o = -pg CFLAGS_REMOVE_cgroup-debug.o = -pg CFLAGS_REMOVE_sched_clock.o = -pg -CFLAGS_REMOVE_sched.o = -mno-spe -pg endif obj-$(CONFIG_FREEZER) += freezer.o -- cgit v1.2.3 From e113a745f693af196c8081b328bf42def086989b Mon Sep 17 00:00:00 2001 From: Dimitri Sivanich Date: Fri, 31 Oct 2008 08:03:41 -0500 Subject: sched/rt: small optimization to update_curr_rt() Impact: micro-optimization to SCHED_FIFO/RR scheduling A very minor improvement, but might it be better to check sched_rt_runtime(rt_rq) before taking the rt_runtime_lock? Peter Zijlstra observes: > Yes, I think its ok to do so. > > Like pointed out in the other thread, there are two races: > > - sched_rt_runtime() going to RUNTIME_INF, and that will be handled > properly by sched_rt_runtime_exceeded() > > - sched_rt_runtime() going to !RUNTIME_INF, and here we can miss an > accounting cycle, but I don't think that is something to worry too > much about. Signed-off-by: Dimitri Sivanich Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar -- kernel/sched_rt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- kernel/sched_rt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index d9ba9d5f99d6..c7963d5d0625 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -537,13 +537,13 @@ static void update_curr_rt(struct rq *rq) for_each_sched_rt_entity(rt_se) { rt_rq = rt_rq_of_se(rt_se); - spin_lock(&rt_rq->rt_runtime_lock); if (sched_rt_runtime(rt_rq) != RUNTIME_INF) { + spin_lock(&rt_rq->rt_runtime_lock); rt_rq->rt_time += delta_exec; if (sched_rt_runtime_exceeded(rt_rq)) resched_task(curr); + spin_unlock(&rt_rq->rt_runtime_lock); } - spin_unlock(&rt_rq->rt_runtime_lock); } } -- cgit v1.2.3 From eefd796a8e831408ce17e633d73d70430748c47a Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 4 Nov 2008 16:15:37 +0800 Subject: sched debug: remove sd_level_to_string() Impact: cleanup Just use the newly introduced sd->name. Signed-off-by: Li Zefan Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 25 +------------------------ 1 file changed, 1 insertion(+), 24 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 5419df9cc5c4..7ac59bae87d2 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -6602,28 +6602,6 @@ early_initcall(migration_init); #ifdef CONFIG_SCHED_DEBUG -static inline const char *sd_level_to_string(enum sched_domain_level lvl) -{ - switch (lvl) { - case SD_LV_NONE: - return "NONE"; - case SD_LV_SIBLING: - return "SIBLING"; - case SD_LV_MC: - return "MC"; - case SD_LV_CPU: - return "CPU"; - case SD_LV_NODE: - return "NODE"; - case SD_LV_ALLNODES: - return "ALLNODES"; - case SD_LV_MAX: - return "MAX"; - - } - return "MAX"; -} - static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level, cpumask_t *groupmask) { @@ -6643,8 +6621,7 @@ static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level, return -1; } - printk(KERN_CONT "span %s level %s\n", - str, sd_level_to_string(sd->level)); + printk(KERN_CONT "span %s level %s\n", str, sd->name); if (!cpu_isset(cpu, sd->span)) { printk(KERN_ERR "ERROR: domain->span does not contain " -- cgit v1.2.3 From 0a0db8f5c9d4bbb9bbfcc2b6cb6bce2d0ef4d73d Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 4 Nov 2008 16:17:05 +0800 Subject: sched debug: remove NULL checking in print_cfs/rt_rq() Impact: cleanup cfs->tg is initialized in init_tg_cfs_entry() with tg != NULL, and will never be invalidated to NULL. And the underlying cgroup of a valid task_group is always valid. Same for rt->tg. Signed-off-by: Li Zefan Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched_debug.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c index 5ae17762ec32..d25cefe3f0eb 100644 --- a/kernel/sched_debug.c +++ b/kernel/sched_debug.c @@ -121,14 +121,9 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq) #if defined(CONFIG_CGROUP_SCHED) && defined(CONFIG_FAIR_GROUP_SCHED) char path[128] = ""; - struct cgroup *cgroup = NULL; struct task_group *tg = cfs_rq->tg; - if (tg) - cgroup = tg->css.cgroup; - - if (cgroup) - cgroup_path(cgroup, path, sizeof(path)); + cgroup_path(tg->css.cgroup, path, sizeof(path)); SEQ_printf(m, "\ncfs_rq[%d]:%s\n", cpu, path); #else @@ -193,14 +188,9 @@ void print_rt_rq(struct seq_file *m, int cpu, struct rt_rq *rt_rq) { #if defined(CONFIG_CGROUP_SCHED) && defined(CONFIG_RT_GROUP_SCHED) char path[128] = ""; - struct cgroup *cgroup = NULL; struct task_group *tg = rt_rq->tg; - if (tg) - cgroup = tg->css.cgroup; - - if (cgroup) - cgroup_path(cgroup, path, sizeof(path)); + cgroup_path(tg->css.cgroup, path, sizeof(path)); SEQ_printf(m, "\nrt_rq[%d]:%s\n", cpu, path); #else -- cgit v1.2.3 From a17e2260926f681a0eb983c1e3cb859ba2064bce Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 4 Nov 2008 16:19:13 +0800 Subject: sched: remove redundant call to unregister_sched_domain_sysctl() Impact: cleanup The sysctl has been unregistered by partition_sched_domains(). Signed-off-by: Li Zefan Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 7ac59bae87d2..3cb94fad33ca 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7691,8 +7691,6 @@ static void detach_destroy_domains(const cpumask_t *cpu_map) cpumask_t tmpmask; int i; - unregister_sched_domain_sysctl(); - for_each_cpu_mask_nr(i, *cpu_map) cpu_attach_domain(NULL, &def_root_domain, i); synchronize_sched(); -- cgit v1.2.3 From faa2f98f856e89d1afb6e4a91707284d242e816e Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 4 Nov 2008 16:20:23 +0800 Subject: sched: add sanity check in partition_sched_domains() Impact: cleanup, add debug check It's wrong to make dattr_new = NULL if doms_new == NULL, it introduces memory leak if dattr_new != NULL. Fortunately dattr_new is always NULL in this case. So remove the code and add a sanity check. Signed-off-by: Li Zefan Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 3cb94fad33ca..213cad5e50aa 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7767,7 +7767,7 @@ match1: ndoms_cur = 0; doms_new = &fallback_doms; cpus_andnot(doms_new[0], cpu_online_map, cpu_isolated_map); - dattr_new = NULL; + WARN_ON_ONCE(dattr_new); } /* Build new domains */ -- cgit v1.2.3 From 90080bf4b803efbc9b9cd3a7ed1639f1e036238e Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Nov 2008 14:37:25 -0800 Subject: sched, documentation: update scheduler header file paths Impact: update documentation Update Documentation/scheduler/ files to reflect changed header files locations. Signed-off-by: Randy Dunlap Signed-off-by: Ingo Molnar --- Documentation/scheduler/sched-arch.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/scheduler/sched-arch.txt b/Documentation/scheduler/sched-arch.txt index 941615a9769b..d43dbcbd163b 100644 --- a/Documentation/scheduler/sched-arch.txt +++ b/Documentation/scheduler/sched-arch.txt @@ -8,7 +8,7 @@ Context switch By default, the switch_to arch function is called with the runqueue locked. This is usually not a problem unless switch_to may need to take the runqueue lock. This is usually due to a wake up operation in -the context switch. See include/asm-ia64/system.h for an example. +the context switch. See arch/ia64/include/asm/system.h for an example. To request the scheduler call switch_to with the runqueue unlocked, you must `#define __ARCH_WANT_UNLOCKED_CTXSW` in a header file @@ -23,7 +23,7 @@ disabled. Interrupts may be enabled over the call if it is likely to introduce a significant interrupt latency by adding the line `#define __ARCH_WANT_INTERRUPTS_ON_CTXSW` in the same place as for unlocked context switches. This define also implies -`__ARCH_WANT_UNLOCKED_CTXSW`. See include/asm-arm/system.h for an +`__ARCH_WANT_UNLOCKED_CTXSW`. See arch/arm/include/asm/system.h for an example. -- cgit v1.2.3 From cf7f8690e864c6fe11e77202dd847fa60f483418 Mon Sep 17 00:00:00 2001 From: Sripathi Kodi Date: Wed, 5 Nov 2008 18:57:14 +0530 Subject: sched, lockdep: inline double_unlock_balance() We have a test case which measures the variation in the amount of time needed to perform a fixed amount of work on the preempt_rt kernel. We started seeing deterioration in it's performance recently. The test should never take more than 10 microseconds, but we started 5-10% failure rate. Using elimination method, we traced the problem to commit 1b12bbc747560ea68bcc132c3d05699e52271da0 (lockdep: re-annotate scheduler runqueues). When LOCKDEP is disabled, this patch only adds an additional function call to double_unlock_balance(). Hence I inlined double_unlock_balance() and the problem went away. Here is a patch to make this change. Signed-off-by: Sripathi Kodi Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- kernel/sched_rt.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index e8819bc6f462..ad10d0aae1d7 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2825,7 +2825,7 @@ static int double_lock_balance(struct rq *this_rq, struct rq *busiest) return ret; } -static void double_unlock_balance(struct rq *this_rq, struct rq *busiest) +static inline void double_unlock_balance(struct rq *this_rq, struct rq *busiest) __releases(busiest->lock) { spin_unlock(&busiest->lock); diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index c7963d5d0625..2bdd44423599 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -910,7 +910,8 @@ static void put_prev_task_rt(struct rq *rq, struct task_struct *p) #define RT_MAX_TRIES 3 static int double_lock_balance(struct rq *this_rq, struct rq *busiest); -static void double_unlock_balance(struct rq *this_rq, struct rq *busiest); +static inline void double_unlock_balance(struct rq *this_rq, + struct rq *busiest); static void deactivate_task(struct rq *rq, struct task_struct *p, int sleep); -- cgit v1.2.3 From a87d091434ed2a34d647979ab12084139ee1fe41 Mon Sep 17 00:00:00 2001 From: Ken Chen Date: Thu, 6 Nov 2008 11:10:49 -0800 Subject: x86, sched: enable wchan config menu item on 64-bit Enable the wchan config menu item for now on x86-64 arch? This will at least allow people to enable/disable frame pointers on scheduler functions. Signed-off-by: Ken Chen Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6f20718d3156..488a4ecd0b59 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -367,7 +367,7 @@ config X86_RDC321X config SCHED_NO_NO_OMIT_FRAME_POINTER def_bool y prompt "Single-depth WCHAN output" - depends on X86_32 + depends on X86 help Calculate simpler /proc//wchan values. If this option is disabled then wchan values will recurse back to the -- cgit v1.2.3 From 6d21cd62516a9697cb7ec33cc52e6b814fb65a13 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 7 Nov 2008 17:03:18 +0800 Subject: sched: clean up SCHED_CPUMASK_ALLOC Impact: cleanup The #if/#endif is ugly. Change SCHED_CPUMASK_ALLOC and SCHED_CPUMASK_FREE to static inline functions. Signed-off-by: Li Zefan Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index b24e57a10f6f..59db86c915f9 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7279,13 +7279,21 @@ struct allmasks { }; #if NR_CPUS > 128 -#define SCHED_CPUMASK_ALLOC 1 -#define SCHED_CPUMASK_FREE(v) kfree(v) -#define SCHED_CPUMASK_DECLARE(v) struct allmasks *v +#define SCHED_CPUMASK_DECLARE(v) struct allmasks *v +static inline void sched_cpumask_alloc(struct allmasks **masks) +{ + *masks = kmalloc(sizeof(**masks), GFP_KERNEL); +} +static inline void sched_cpumask_free(struct allmasks *masks) +{ + kfree(masks); +} #else -#define SCHED_CPUMASK_ALLOC 0 -#define SCHED_CPUMASK_FREE(v) -#define SCHED_CPUMASK_DECLARE(v) struct allmasks _v, *v = &_v +#define SCHED_CPUMASK_DECLARE(v) struct allmasks _v, *v = &_v +static inline void sched_cpumask_alloc(struct allmasks **masks) +{ } +static inline void sched_cpumask_free(struct allmasks *masks) +{ } #endif #define SCHED_CPUMASK_VAR(v, a) cpumask_t *v = (cpumask_t *) \ @@ -7361,9 +7369,8 @@ static int __build_sched_domains(const cpumask_t *cpu_map, return -ENOMEM; } -#if SCHED_CPUMASK_ALLOC /* get space for all scratch cpumask variables */ - allmasks = kmalloc(sizeof(*allmasks), GFP_KERNEL); + sched_cpumask_alloc(&allmasks); if (!allmasks) { printk(KERN_WARNING "Cannot alloc cpumask array\n"); kfree(rd); @@ -7372,7 +7379,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map, #endif return -ENOMEM; } -#endif + tmpmask = (cpumask_t *)allmasks; @@ -7626,13 +7633,13 @@ static int __build_sched_domains(const cpumask_t *cpu_map, cpu_attach_domain(sd, rd, i); } - SCHED_CPUMASK_FREE((void *)allmasks); + sched_cpumask_free(allmasks); return 0; #ifdef CONFIG_NUMA error: free_sched_groups(cpu_map, tmpmask); - SCHED_CPUMASK_FREE((void *)allmasks); + sched_cpumask_free(allmasks); kfree(rd); return -ENOMEM; #endif -- cgit v1.2.3 From ae1e9130bfb9ad55eb97ec3fb17a122b7a118f98 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 11 Nov 2008 09:05:16 +0100 Subject: sched: rename SCHED_NO_NO_OMIT_FRAME_POINTER => SCHED_OMIT_FRAME_POINTER Impact: cleanup, change .config option name We had this ugly config name for a long time for hysteric raisons. Rename it to a saner name. We still cannot get rid of it completely, until /proc//stack usage replaces WCHAN usage for good. We'll be able to do that in the v2.6.29/v2.6.30 timeframe. Signed-off-by: Ingo Molnar --- arch/ia64/Kconfig | 2 +- arch/m32r/Kconfig | 2 +- arch/mips/Kconfig | 2 +- arch/powerpc/Kconfig | 2 +- arch/x86/Kconfig | 2 +- include/asm-m32r/system.h | 2 +- kernel/Makefile | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 27eec71429b0..59d12788b60c 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -99,7 +99,7 @@ config GENERIC_IOMAP bool default y -config SCHED_NO_NO_OMIT_FRAME_POINTER +config SCHED_OMIT_FRAME_POINTER bool default y diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index dbaed4a63815..29047d5c259a 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -273,7 +273,7 @@ config GENERIC_CALIBRATE_DELAY bool default y -config SCHED_NO_NO_OMIT_FRAME_POINTER +config SCHED_OMIT_FRAME_POINTER bool default y diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index f4af967a6b30..a5255e7c79e0 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -653,7 +653,7 @@ config GENERIC_CMOS_UPDATE bool default y -config SCHED_NO_NO_OMIT_FRAME_POINTER +config SCHED_OMIT_FRAME_POINTER bool default y diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 525c13a4de93..adb23ea1c1ef 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -141,7 +141,7 @@ config GENERIC_NVRAM bool default y if PPC32 -config SCHED_NO_NO_OMIT_FRAME_POINTER +config SCHED_OMIT_FRAME_POINTER bool default y diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 1d5550d19b66..74db682ec1ce 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -364,7 +364,7 @@ config X86_RDC321X as R-8610-(G). If you don't have one of these chips, you should say N here. -config SCHED_NO_NO_OMIT_FRAME_POINTER +config SCHED_OMIT_FRAME_POINTER def_bool y prompt "Single-depth WCHAN output" depends on X86 diff --git a/include/asm-m32r/system.h b/include/asm-m32r/system.h index 70a57c8c002b..c980f5ba8de7 100644 --- a/include/asm-m32r/system.h +++ b/include/asm-m32r/system.h @@ -23,7 +23,7 @@ */ #if defined(CONFIG_FRAME_POINTER) || \ - !defined(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER) + !defined(CONFIG_SCHED_OMIT_FRAME_POINTER) #define M32R_PUSH_FP " push fp\n" #define M32R_POP_FP " pop fp\n" #else diff --git a/kernel/Makefile b/kernel/Makefile index e1af03972148..46e67a398495 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -91,7 +91,7 @@ obj-$(CONFIG_FUNCTION_TRACER) += trace/ obj-$(CONFIG_TRACING) += trace/ obj-$(CONFIG_SMP) += sched_cpupri.o -ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER),y) +ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y) # According to Alan Modra , the -fno-omit-frame-pointer is # needed for x86 only. Why this used to be enabled for all architectures is beyond # me. I suspect most platforms don't need this, but until we know that for sure -- cgit v1.2.3 From ff9b48c3598732926fa09afd7f526981c32a48cc Mon Sep 17 00:00:00 2001 From: Bharata B Rao Date: Mon, 10 Nov 2008 21:34:09 +0530 Subject: sched: include group statistics in /proc/sched_debug Impact: extend /proc/sched_debug info Since the statistics of a group entity isn't exported directly from the kernel, it becomes difficult to obtain some of the group statistics. For example, the current method to obtain exec time of a group entity is not always accurate. One has to read the exec times of all the tasks(/proc//sched) in the group and add them. This method fails (or becomes difficult) if we want to collect stats of a group over a duration where tasks get created and terminated. This patch makes it easier to obtain group stats by directly including them in /proc/sched_debug. Stats like group exec time would help user programs (like LTP) to accurately measure the group fairness. An example output of group stats from /proc/sched_debug: cfs_rq[3]:/3/a/1 .exec_clock : 89.598007 .MIN_vruntime : 0.000001 .min_vruntime : 256300.970506 .max_vruntime : 0.000001 .spread : 0.000000 .spread0 : -25373.372248 .nr_running : 0 .load : 0 .yld_exp_empty : 0 .yld_act_empty : 0 .yld_both_empty : 0 .yld_count : 4474 .sched_switch : 0 .sched_count : 40507 .sched_goidle : 12686 .ttwu_count : 15114 .ttwu_local : 11950 .bkl_count : 67 .nr_spread_over : 0 .shares : 0 .se->exec_start : 113676.727170 .se->vruntime : 1592.612714 .se->sum_exec_runtime : 89.598007 .se->wait_start : 0.000000 .se->sleep_start : 0.000000 .se->block_start : 0.000000 .se->sleep_max : 0.000000 .se->block_max : 0.000000 .se->exec_max : 1.000282 .se->slice_max : 1.999750 .se->wait_max : 54.981093 .se->wait_sum : 217.610521 .se->wait_count : 50 .se->load.weight : 2 Signed-off-by: Bharata B Rao Acked-by: Srivatsa Vaddagiri Acked-by: Dhaval Giani Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched_debug.c | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c index d25cefe3f0eb..3625a6598699 100644 --- a/kernel/sched_debug.c +++ b/kernel/sched_debug.c @@ -53,6 +53,40 @@ static unsigned long nsec_low(unsigned long long nsec) #define SPLIT_NS(x) nsec_high(x), nsec_low(x) +#ifdef CONFIG_FAIR_GROUP_SCHED +static void print_cfs_group_stats(struct seq_file *m, int cpu, + struct task_group *tg) +{ + struct sched_entity *se = tg->se[cpu]; + if (!se) + return; + +#define P(F) \ + SEQ_printf(m, " .%-30s: %lld\n", #F, (long long)F) +#define PN(F) \ + SEQ_printf(m, " .%-30s: %lld.%06ld\n", #F, SPLIT_NS((long long)F)) + + PN(se->exec_start); + PN(se->vruntime); + PN(se->sum_exec_runtime); +#ifdef CONFIG_SCHEDSTATS + PN(se->wait_start); + PN(se->sleep_start); + PN(se->block_start); + PN(se->sleep_max); + PN(se->block_max); + PN(se->exec_max); + PN(se->slice_max); + PN(se->wait_max); + PN(se->wait_sum); + P(se->wait_count); +#endif + P(se->load.weight); +#undef PN +#undef P +} +#endif + static void print_task(struct seq_file *m, struct rq *rq, struct task_struct *p) { @@ -181,6 +215,7 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq) #ifdef CONFIG_SMP SEQ_printf(m, " .%-30s: %lu\n", "shares", cfs_rq->shares); #endif + print_cfs_group_stats(m, cpu, cfs_rq->tg); #endif } @@ -261,7 +296,7 @@ static int sched_debug_show(struct seq_file *m, void *v) u64 now = ktime_to_ns(ktime_get()); int cpu; - SEQ_printf(m, "Sched Debug Version: v0.07, %s %.*s\n", + SEQ_printf(m, "Sched Debug Version: v0.08, %s %.*s\n", init_utsname()->release, (int)strcspn(init_utsname()->version, " "), init_utsname()->version); -- cgit v1.2.3 From 934352f214b3251eb0793c1209d346595a661d80 Mon Sep 17 00:00:00 2001 From: Bharata B Rao Date: Mon, 10 Nov 2008 20:41:13 +0530 Subject: sched: add hierarchical accounting to cpu accounting controller Impact: improve CPU time accounting of tasks under the cpu accounting controller Add hierarchical accounting to cpu accounting controller and include cpuacct documentation. Currently, while charging the task's cputime to its accounting group, the accounting group hierarchy isn't updated. This patch charges the cputime of a task to its accounting group and all its parent accounting groups. Reported-by: Srivatsa Vaddagiri Signed-off-by: Bharata B Rao Reviewed-by: Paul Menage Acked-by: Balbir Singh Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- Documentation/controllers/cpuacct.txt | 32 ++++++++++++++++++++++++++++++++ kernel/sched.c | 12 +++++++++--- 2 files changed, 41 insertions(+), 3 deletions(-) create mode 100644 Documentation/controllers/cpuacct.txt diff --git a/Documentation/controllers/cpuacct.txt b/Documentation/controllers/cpuacct.txt new file mode 100644 index 000000000000..bb775fbe43d7 --- /dev/null +++ b/Documentation/controllers/cpuacct.txt @@ -0,0 +1,32 @@ +CPU Accounting Controller +------------------------- + +The CPU accounting controller is used to group tasks using cgroups and +account the CPU usage of these groups of tasks. + +The CPU accounting controller supports multi-hierarchy groups. An accounting +group accumulates the CPU usage of all of its child groups and the tasks +directly present in its group. + +Accounting groups can be created by first mounting the cgroup filesystem. + +# mkdir /cgroups +# mount -t cgroup -ocpuacct none /cgroups + +With the above step, the initial or the parent accounting group +becomes visible at /cgroups. At bootup, this group includes all the +tasks in the system. /cgroups/tasks lists the tasks in this cgroup. +/cgroups/cpuacct.usage gives the CPU time (in nanoseconds) obtained by +this group which is essentially the CPU time obtained by all the tasks +in the system. + +New accounting groups can be created under the parent group /cgroups. + +# cd /cgroups +# mkdir g1 +# echo $$ > g1 + +The above steps create a new group g1 and move the current shell +process (bash) into it. CPU time consumed by this bash and its children +can be obtained from g1/cpuacct.usage and the same is accumulated in +/cgroups/cpuacct.usage also. diff --git a/kernel/sched.c b/kernel/sched.c index 59db86c915f9..ebaf432365f6 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -9196,11 +9196,12 @@ struct cgroup_subsys cpu_cgroup_subsys = { * (balbir@in.ibm.com). */ -/* track cpu usage of a group of tasks */ +/* track cpu usage of a group of tasks and its child groups */ struct cpuacct { struct cgroup_subsys_state css; /* cpuusage holds pointer to a u64-type object on every cpu */ u64 *cpuusage; + struct cpuacct *parent; }; struct cgroup_subsys cpuacct_subsys; @@ -9234,6 +9235,9 @@ static struct cgroup_subsys_state *cpuacct_create( return ERR_PTR(-ENOMEM); } + if (cgrp->parent) + ca->parent = cgroup_ca(cgrp->parent); + return &ca->css; } @@ -9313,14 +9317,16 @@ static int cpuacct_populate(struct cgroup_subsys *ss, struct cgroup *cgrp) static void cpuacct_charge(struct task_struct *tsk, u64 cputime) { struct cpuacct *ca; + int cpu; if (!cpuacct_subsys.active) return; + cpu = task_cpu(tsk); ca = task_ca(tsk); - if (ca) { - u64 *cpuusage = percpu_ptr(ca->cpuusage, task_cpu(tsk)); + for (; ca; ca = ca->parent) { + u64 *cpuusage = percpu_ptr(ca->cpuusage, cpu); *cpuusage += cputime; } } -- cgit v1.2.3 From 50ee91765e25e7967a7b69cd5cc2bcab85e2eeb8 Mon Sep 17 00:00:00 2001 From: Dhaval Giani Date: Tue, 11 Nov 2008 18:13:23 +0530 Subject: sched/rt: removed unneeded defintion Impact: cleanup This function no longer exists, so remove the defintion. Signed-off-by: Dhaval Giani Signed-off-by: Ingo Molnar --- include/linux/sched.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index b483f39a7112..c6bfb34d978e 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -258,8 +258,6 @@ static inline int select_nohz_load_balancer(int cpu) } #endif -extern unsigned long rt_needs_cpu(int cpu); - /* * Only dump TASK_* tasks. (0 for all tasks) */ -- cgit v1.2.3 From ec4e0e2fe018992d980910db901637c814575914 Mon Sep 17 00:00:00 2001 From: Ken Chen Date: Tue, 18 Nov 2008 22:41:57 -0800 Subject: sched: fix inconsistency when redistribute per-cpu tg->cfs_rq shares Impact: make load-balancing more consistent In the update_shares() path leading to tg_shares_up(), the calculation of per-cpu cfs_rq shares is rather erratic even under moderate task wake up rate. The problem is that the per-cpu tg->cfs_rq load weight used in the sd_rq_weight aggregation and actual redistribution of the cfs_rq->shares are collected at different time. Under moderate system load, we've seen quite a bit of variation on the cfs_rq->shares and ultimately wildly affects sched_entity's load weight. This patch caches the result of initial per-cpu load weight when doing the sum calculation, and then pass it down to update_group_shares_cpu() for redistributing per-cpu cfs_rq shares. This allows consistent total cfs_rq shares across all CPUs. It also simplifies the rounding and zero load weight check. Signed-off-by: Ken Chen Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 41 +++++++++++++++-------------------------- 1 file changed, 15 insertions(+), 26 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index a4c156d9a4a5..93bfb086e60f 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1453,27 +1453,13 @@ static void update_group_shares_cpu(struct task_group *tg, int cpu, unsigned long sd_shares, unsigned long sd_rq_weight) { - int boost = 0; unsigned long shares; unsigned long rq_weight; if (!tg->se[cpu]) return; - rq_weight = tg->cfs_rq[cpu]->load.weight; - - /* - * If there are currently no tasks on the cpu pretend there is one of - * average load so that when a new task gets to run here it will not - * get delayed by group starvation. - */ - if (!rq_weight) { - boost = 1; - rq_weight = NICE_0_LOAD; - } - - if (unlikely(rq_weight > sd_rq_weight)) - rq_weight = sd_rq_weight; + rq_weight = tg->cfs_rq[cpu]->rq_weight; /* * \Sum shares * rq_weight @@ -1481,7 +1467,7 @@ update_group_shares_cpu(struct task_group *tg, int cpu, * \Sum rq_weight * */ - shares = (sd_shares * rq_weight) / (sd_rq_weight + 1); + shares = (sd_shares * rq_weight) / sd_rq_weight; shares = clamp_t(unsigned long, shares, MIN_SHARES, MAX_SHARES); if (abs(shares - tg->se[cpu]->load.weight) > @@ -1490,11 +1476,7 @@ update_group_shares_cpu(struct task_group *tg, int cpu, unsigned long flags; spin_lock_irqsave(&rq->lock, flags); - /* - * record the actual number of shares, not the boosted amount. - */ - tg->cfs_rq[cpu]->shares = boost ? 0 : shares; - tg->cfs_rq[cpu]->rq_weight = rq_weight; + tg->cfs_rq[cpu]->shares = shares; __set_se_shares(tg->se[cpu], shares); spin_unlock_irqrestore(&rq->lock, flags); @@ -1508,13 +1490,23 @@ update_group_shares_cpu(struct task_group *tg, int cpu, */ static int tg_shares_up(struct task_group *tg, void *data) { - unsigned long rq_weight = 0; + unsigned long weight, rq_weight = 0; unsigned long shares = 0; struct sched_domain *sd = data; int i; for_each_cpu_mask(i, sd->span) { - rq_weight += tg->cfs_rq[i]->load.weight; + /* + * If there are currently no tasks on the cpu pretend there + * is one of average load so that when a new task gets to + * run here it will not get delayed by group starvation. + */ + weight = tg->cfs_rq[i]->load.weight; + if (!weight) + weight = NICE_0_LOAD; + + tg->cfs_rq[i]->rq_weight = weight; + rq_weight += weight; shares += tg->cfs_rq[i]->shares; } @@ -1524,9 +1516,6 @@ static int tg_shares_up(struct task_group *tg, void *data) if (!sd->parent || !(sd->parent->flags & SD_LOAD_BALANCE)) shares = tg->shares; - if (!rq_weight) - rq_weight = cpus_weight(sd->span) * NICE_0_LOAD; - for_each_cpu_mask(i, sd->span) update_group_shares_cpu(tg, i, shares, rq_weight); -- cgit v1.2.3 From 957ad0166e9f76a8561dafa5e14ef5bd3f5e9a3b Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Fri, 21 Nov 2008 01:30:36 +0100 Subject: sched: update comment for move_task_off_dead_cpu Impact: cleanup This commit: commit f7b4cddcc5aca03e80e357360c9424dfba5056c2 Author: Oleg Nesterov Date: Tue Oct 16 23:30:56 2007 -0700 do CPU_DEAD migrating under read_lock(tasklist) instead of write_lock_irq(ta Currently move_task_off_dead_cpu() is called under write_lock_irq(tasklist). This means it can't use task_lock() which is needed to improve migrating to take task's ->cpuset into account. Change the code to call move_task_off_dead_cpu() with irqs enabled, and change migrate_live_tasks() to use read_lock(tasklist). ...forgot to update the comment in front of move_task_off_dead_cpu. Reference: http://lkml.org/lkml/2008/6/23/135 Signed-off-by: Vegard Nossum Signed-off-by: Ingo Molnar --- kernel/sched.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 93bfb086e60f..a6085d5166dd 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -6094,7 +6094,6 @@ static int __migrate_task_irq(struct task_struct *p, int src_cpu, int dest_cpu) /* * Figure out where task on dead CPU should go, use force if necessary. - * NOTE: interrupts should be disabled by the caller */ static void move_task_off_dead_cpu(int dead_cpu, struct task_struct *p) { -- cgit v1.2.3 From 70574a996fc7a70c5586eb56bd92a544eccf18b6 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 28 Nov 2008 22:08:00 +0300 Subject: sched: move double_unlock_balance() higher Move double_lock_balance()/double_unlock_balance() higher to fix the following with gcc-3.4.6: CC kernel/sched.o In file included from kernel/sched.c:1605: kernel/sched_rt.c: In function `find_lock_lowest_rq': kernel/sched_rt.c:914: sorry, unimplemented: inlining failed in call to 'double_unlock_balance': function body not available kernel/sched_rt.c:1077: sorry, unimplemented: called from here make[2]: *** [kernel/sched.o] Error 1 Signed-off-by: Alexey Dobriyan Signed-off-by: Ingo Molnar --- kernel/sched.c | 67 +++++++++++++++++++++++++++---------------------------- kernel/sched_rt.c | 4 ---- 2 files changed, 33 insertions(+), 38 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 3d1ee429219b..6a99703e0eb0 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1581,6 +1581,39 @@ static inline void update_shares_locked(struct rq *rq, struct sched_domain *sd) #endif +/* + * double_lock_balance - lock the busiest runqueue, this_rq is locked already. + */ +static int double_lock_balance(struct rq *this_rq, struct rq *busiest) + __releases(this_rq->lock) + __acquires(busiest->lock) + __acquires(this_rq->lock) +{ + int ret = 0; + + if (unlikely(!irqs_disabled())) { + /* printk() doesn't work good under rq->lock */ + spin_unlock(&this_rq->lock); + BUG_ON(1); + } + if (unlikely(!spin_trylock(&busiest->lock))) { + if (busiest < this_rq) { + spin_unlock(&this_rq->lock); + spin_lock(&busiest->lock); + spin_lock_nested(&this_rq->lock, SINGLE_DEPTH_NESTING); + ret = 1; + } else + spin_lock_nested(&busiest->lock, SINGLE_DEPTH_NESTING); + } + return ret; +} + +static inline void double_unlock_balance(struct rq *this_rq, struct rq *busiest) + __releases(busiest->lock) +{ + spin_unlock(&busiest->lock); + lock_set_subclass(&this_rq->lock.dep_map, 0, _RET_IP_); +} #endif #ifdef CONFIG_FAIR_GROUP_SCHED @@ -2780,40 +2813,6 @@ static void double_rq_unlock(struct rq *rq1, struct rq *rq2) __release(rq2->lock); } -/* - * double_lock_balance - lock the busiest runqueue, this_rq is locked already. - */ -static int double_lock_balance(struct rq *this_rq, struct rq *busiest) - __releases(this_rq->lock) - __acquires(busiest->lock) - __acquires(this_rq->lock) -{ - int ret = 0; - - if (unlikely(!irqs_disabled())) { - /* printk() doesn't work good under rq->lock */ - spin_unlock(&this_rq->lock); - BUG_ON(1); - } - if (unlikely(!spin_trylock(&busiest->lock))) { - if (busiest < this_rq) { - spin_unlock(&this_rq->lock); - spin_lock(&busiest->lock); - spin_lock_nested(&this_rq->lock, SINGLE_DEPTH_NESTING); - ret = 1; - } else - spin_lock_nested(&busiest->lock, SINGLE_DEPTH_NESTING); - } - return ret; -} - -static inline void double_unlock_balance(struct rq *this_rq, struct rq *busiest) - __releases(busiest->lock) -{ - spin_unlock(&busiest->lock); - lock_set_subclass(&this_rq->lock.dep_map, 0, _RET_IP_); -} - /* * If dest_cpu is allowed for this process, migrate the task to it. * This is accomplished by forcing the cpu_allowed mask to only diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 2bdd44423599..587a16e2a8f5 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -909,10 +909,6 @@ static void put_prev_task_rt(struct rq *rq, struct task_struct *p) /* Only try algorithms three times */ #define RT_MAX_TRIES 3 -static int double_lock_balance(struct rq *this_rq, struct rq *busiest); -static inline void double_unlock_balance(struct rq *this_rq, - struct rq *busiest); - static void deactivate_task(struct rq *rq, struct task_struct *p, int sleep); static int pick_rt_task(struct rq *rq, struct task_struct *p, int cpu) -- cgit v1.2.3 From 6c415b9234a8c71f290e5d4fddc467f103f32719 Mon Sep 17 00:00:00 2001 From: Arun R Bharadwaj Date: Mon, 1 Dec 2008 20:49:05 +0530 Subject: sched: add uid information to sched_debug for CONFIG_USER_SCHED Impact: extend information in /proc/sched_debug This patch adds uid information in sched_debug for CONFIG_USER_SCHED Signed-off-by: Arun R Bharadwaj Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- include/linux/sched.h | 1 + kernel/sched.c | 10 ++++++++++ kernel/sched_debug.c | 6 +++++- kernel/user.c | 2 ++ 4 files changed, 18 insertions(+), 1 deletion(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 7a69c4d224ee..d8733f07d80b 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2218,6 +2218,7 @@ extern void normalize_rt_tasks(void); extern struct task_group init_task_group; #ifdef CONFIG_USER_SCHED extern struct task_group root_task_group; +extern void set_tg_uid(struct user_struct *user); #endif extern struct task_group *sched_create_group(struct task_group *parent); diff --git a/kernel/sched.c b/kernel/sched.c index 6a99703e0eb0..4c7388ef5be7 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -261,6 +261,10 @@ struct task_group { struct cgroup_subsys_state css; #endif +#ifdef CONFIG_USER_SCHED + uid_t uid; +#endif + #ifdef CONFIG_FAIR_GROUP_SCHED /* schedulable entities of this group on each cpu */ struct sched_entity **se; @@ -286,6 +290,12 @@ struct task_group { #ifdef CONFIG_USER_SCHED +/* Helper function to pass uid information to create_sched_user() */ +void set_tg_uid(struct user_struct *user) +{ + user->tg->uid = user->uid; +} + /* * Root task group. * Every UID task group (including init_task_group aka UID-0) will diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c index baf2f17af462..4293cfa9681d 100644 --- a/kernel/sched_debug.c +++ b/kernel/sched_debug.c @@ -160,10 +160,14 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq) cgroup_path(tg->css.cgroup, path, sizeof(path)); SEQ_printf(m, "\ncfs_rq[%d]:%s\n", cpu, path); +#elif defined(CONFIG_USER_SCHED) && defined(CONFIG_FAIR_GROUP_SCHED) + { + uid_t uid = cfs_rq->tg->uid; + SEQ_printf(m, "\ncfs_rq[%d] for UID: %u\n", cpu, uid); + } #else SEQ_printf(m, "\ncfs_rq[%d]:\n", cpu); #endif - SEQ_printf(m, " .%-30s: %Ld.%06ld\n", "exec_clock", SPLIT_NS(cfs_rq->exec_clock)); diff --git a/kernel/user.c b/kernel/user.c index 39d6159fae43..cec2224bc9f5 100644 --- a/kernel/user.c +++ b/kernel/user.c @@ -101,6 +101,8 @@ static int sched_create_user(struct user_struct *up) if (IS_ERR(up->tg)) rc = -ENOMEM; + set_tg_uid(up); + return rc; } -- cgit v1.2.3 From 5436499e6098759c2340f8b906ea52f993dc4efb Mon Sep 17 00:00:00 2001 From: Ken Chen Date: Sun, 7 Dec 2008 18:47:37 -0800 Subject: sched: fix sd_parent_degenerate on non-numa smp machine Impact: optimize the sched domains tree some more The addition of SD_SERIALIZE flag added to SD_NODE_INIT prevented top level dummy numa sched_domain to be properly degenerated on non-numa smp machine. The reason is that in sd_parent_degenerate(), it found that the child and parent does not have comon sched_domain flags due to SD_SERIALIZE. However, for non-numa smp box, the top level is a dummy with a single sched_group. Filter out SD_SERIALIZE if it is on non-numa machine to properly degenerate top level node sched_domain. this will cut back some of the sd domain walk in the load balancer code. Signed-off-by: Ken Chen Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/sched.c b/kernel/sched.c index 152828239ef0..74498c840f93 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -6768,6 +6768,8 @@ sd_parent_degenerate(struct sched_domain *sd, struct sched_domain *parent) SD_BALANCE_EXEC | SD_SHARE_CPUPOWER | SD_SHARE_PKG_RESOURCES); + if (nr_node_ids == 1) + pflags &= ~SD_SERIALIZE; } if (~cflags & pflags) return 0; -- cgit v1.2.3 From efbe027e95dc13ac343b6130948418d7ead7ddf1 Mon Sep 17 00:00:00 2001 From: Vaidyanathan Srinivasan Date: Mon, 8 Dec 2008 20:52:49 +0530 Subject: sched: idle_balance() does not call load_balance_newidle() Impact: fix SD_BALANCE_NEWIDLEand broaden its use load_balance_newidle() does not get called if SD_BALANCE_NEWIDLE is set at higher level domain (3-CPU) and not in low level domain (2-MC). pulled_task is initialised to -1 and checked for non-zero which is always true if the lowest level sched_domain does not have SD_BALANCE_NEWIDLE flag set. Signed-off-by: Vaidyanathan Srinivasan Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 74498c840f93..bb9c6384d077 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -3685,7 +3685,7 @@ out_balanced: static void idle_balance(int this_cpu, struct rq *this_rq) { struct sched_domain *sd; - int pulled_task = -1; + int pulled_task = 0; unsigned long next_balance = jiffies + HZ; cpumask_t tmpmask; -- cgit v1.2.3 From ee79d1bdb6a10499e53f80b1e8d14110215178ba Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 9 Dec 2008 18:49:50 +0100 Subject: sched: let arch_update_cpu_topology indicate if topology changed Change arch_update_cpu_topology so it returns 1 if the cpu topology changed and 0 if it didn't change. This will be useful for the next patch which adds a call to this function in partition_sched_domains. Signed-off-by: Heiko Carstens Signed-off-by: Ingo Molnar --- arch/s390/kernel/topology.c | 5 +++-- include/linux/topology.h | 2 +- kernel/sched.c | 8 +++++++- 3 files changed, 11 insertions(+), 4 deletions(-) diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index a947899dcba1..bf96f1b5c6ec 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -212,7 +212,7 @@ static void update_cpu_core_map(void) cpu_core_map[cpu] = cpu_coregroup_map(cpu); } -void arch_update_cpu_topology(void) +int arch_update_cpu_topology(void) { struct tl_info *info = tl_info; struct sys_device *sysdev; @@ -221,7 +221,7 @@ void arch_update_cpu_topology(void) if (!machine_has_topology) { update_cpu_core_map(); topology_update_polarization_simple(); - return; + return 0; } stsi(info, 15, 1, 2); tl_to_cores(info); @@ -230,6 +230,7 @@ void arch_update_cpu_topology(void) sysdev = get_cpu_sysdev(cpu); kobject_uevent(&sysdev->kobj, KOBJ_CHANGE); } + return 1; } static void topology_work_fn(struct work_struct *work) diff --git a/include/linux/topology.h b/include/linux/topology.h index 117f1b7405cf..0c5b5ac36d8e 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -49,7 +49,7 @@ for_each_online_node(node) \ if (nr_cpus_node(node)) -void arch_update_cpu_topology(void); +int arch_update_cpu_topology(void); /* Conform to ACPI 2.0 SLIT distance definitions */ #define LOCAL_DISTANCE 10 diff --git a/kernel/sched.c b/kernel/sched.c index ef212da928e8..fcfbbd9dbd60 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7675,8 +7675,14 @@ static struct sched_domain_attr *dattr_cur; */ static cpumask_t fallback_doms; -void __attribute__((weak)) arch_update_cpu_topology(void) +/* + * arch_update_cpu_topology lets virtualized architectures update the + * cpu core maps. It is supposed to return 1 if the topology changed + * or 0 if it stayed the same. + */ +int __attribute__((weak)) arch_update_cpu_topology(void) { + return 0; } /* -- cgit v1.2.3 From d65bd5ecb2bd166cea4952a59b7e16cc3ad6ef6c Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 9 Dec 2008 18:49:51 +0100 Subject: sched: add missing arch_update_cpu_topology() call arch_reinit_sched_domains() used to call arch_update_cpu_topology() via arch_init_sched_domains(). This call got lost with e761b7725234276a802322549cee5255305a0930 ("cpu hotplug, sched: Introduce cpu_active_map and redo sched domain managment (take 2)". So we might end up with outdated and missing cpus in the cpu core maps (architecture used to call arch_reinit_sched_domains if cpu topology changed). This adds a call to arch_update_cpu_topology in partition_sched_domains which gets called whenever scheduling domains get updated. Which is what is supposed to happen when cpu topology changes. Signed-off-by: Heiko Carstens Signed-off-by: Ingo Molnar --- kernel/sched.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index fcfbbd9dbd60..ad7b93be5691 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7774,17 +7774,21 @@ void partition_sched_domains(int ndoms_new, cpumask_t *doms_new, struct sched_domain_attr *dattr_new) { int i, j, n; + int new_topology; mutex_lock(&sched_domains_mutex); /* always unregister in case we don't destroy any domains */ unregister_sched_domain_sysctl(); + /* Let architecture update cpu core mappings. */ + new_topology = arch_update_cpu_topology(); + n = doms_new ? ndoms_new : 0; /* Destroy deleted domains */ for (i = 0; i < ndoms_cur; i++) { - for (j = 0; j < n; j++) { + for (j = 0; j < n && !new_topology; j++) { if (cpus_equal(doms_cur[i], doms_new[j]) && dattrs_equal(dattr_cur, i, dattr_new, j)) goto match1; @@ -7804,7 +7808,7 @@ match1: /* Build new domains */ for (i = 0; i < ndoms_new; i++) { - for (j = 0; j < ndoms_cur; j++) { + for (j = 0; j < ndoms_cur && !new_topology; j++) { if (cpus_equal(doms_new[i], doms_cur[j]) && dattrs_equal(dattr_new, i, dattr_cur, j)) goto match2; -- cgit v1.2.3 From 03e89e4574a680af15f59329b061f35d9813aff4 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Tue, 16 Dec 2008 08:45:30 +0100 Subject: sched: fix wakeup preemption clock Impact: sharpen the wakeup-granularity to always be against current scheduler time It was possible to do the preemption check against an old time stamp. Signed-off-by: Mike Galbraith Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- kernel/sched_fair.c | 7 +++---- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index ad7b93be5691..88215066efae 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2266,6 +2266,7 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state, int sync) smp_wmb(); rq = task_rq_lock(p, &flags); + update_rq_clock(rq); old_state = p->state; if (!(old_state & state)) goto out; @@ -2323,7 +2324,6 @@ out_activate: schedstat_inc(p, se.nr_wakeups_local); else schedstat_inc(p, se.nr_wakeups_remote); - update_rq_clock(rq); activate_task(rq, p, 1); success = 1; diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 98345e45b059..928cd74cff0d 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1345,12 +1345,11 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int sync) { struct task_struct *curr = rq->curr; struct sched_entity *se = &curr->se, *pse = &p->se; + struct cfs_rq *cfs_rq = task_cfs_rq(curr); - if (unlikely(rt_prio(p->prio))) { - struct cfs_rq *cfs_rq = task_cfs_rq(curr); + update_curr(cfs_rq); - update_rq_clock(rq); - update_curr(cfs_rq); + if (unlikely(rt_prio(p->prio))) { resched_task(curr); return; } -- cgit v1.2.3 From 34f28ecd0f4bdc733c681294d02d9fab5880591b Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 16 Dec 2008 08:45:31 +0100 Subject: sched: optimize update_curr() Impact: micro-optimization Skip the hard work when there is none. Signed-off-by: Peter Zijlstra Acked-by: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 928cd74cff0d..5ad4440f0fc4 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -492,6 +492,8 @@ static void update_curr(struct cfs_rq *cfs_rq) * overflow on 32 bits): */ delta_exec = (unsigned long)(now - curr->exec_start); + if (!delta_exec) + return; __update_curr(cfs_rq, curr, delta_exec); curr->exec_start = now; -- cgit v1.2.3 From 720f54988e17b33f3f477010b3a68ee872d20d5a Mon Sep 17 00:00:00 2001 From: Ken Chen Date: Mon, 15 Dec 2008 22:02:01 -0800 Subject: sched, cpuacct: refactoring cpuusage_read / cpuusage_write Impact: micro-optimize the code on 64-bit architectures In the thread regarding to 'export percpu cpuacct cgroup stats' http://lkml.org/lkml/2008/12/7/13 akpm pointed out that current cpuacct code is inefficient. This patch refactoring the following: * make cpu_rq locking only on 32-bit * change iterator to each_present_cpu instead of each_possible_cpu to make it hotplug friendly. It's a bit of code churn, but I was rewarded with 160 byte code size saving on x86-64 arch and zero code size change on i386. Signed-off-by: Ken Chen Cc: Paul Menage Cc: Li Zefan Signed-off-by: Ingo Molnar --- kernel/sched.c | 56 +++++++++++++++++++++++++++++++++++++++----------------- 1 file changed, 39 insertions(+), 17 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 88215066efae..41b7e2d524d6 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -9275,6 +9275,41 @@ cpuacct_destroy(struct cgroup_subsys *ss, struct cgroup *cgrp) kfree(ca); } +static u64 cpuacct_cpuusage_read(struct cpuacct *ca, int cpu) +{ + u64 *cpuusage = percpu_ptr(ca->cpuusage, cpu); + u64 data; + +#ifndef CONFIG_64BIT + /* + * Take rq->lock to make 64-bit read safe on 32-bit platforms. + */ + spin_lock_irq(&cpu_rq(cpu)->lock); + data = *cpuusage; + spin_unlock_irq(&cpu_rq(cpu)->lock); +#else + data = *cpuusage; +#endif + + return data; +} + +static void cpuacct_cpuusage_write(struct cpuacct *ca, int cpu, u64 val) +{ + u64 *cpuusage = percpu_ptr(ca->cpuusage, cpu); + +#ifndef CONFIG_64BIT + /* + * Take rq->lock to make 64-bit write safe on 32-bit platforms. + */ + spin_lock_irq(&cpu_rq(cpu)->lock); + *cpuusage = val; + spin_unlock_irq(&cpu_rq(cpu)->lock); +#else + *cpuusage = val; +#endif +} + /* return total cpu usage (in nanoseconds) of a group */ static u64 cpuusage_read(struct cgroup *cgrp, struct cftype *cft) { @@ -9282,17 +9317,8 @@ static u64 cpuusage_read(struct cgroup *cgrp, struct cftype *cft) u64 totalcpuusage = 0; int i; - for_each_possible_cpu(i) { - u64 *cpuusage = percpu_ptr(ca->cpuusage, i); - - /* - * Take rq->lock to make 64-bit addition safe on 32-bit - * platforms. - */ - spin_lock_irq(&cpu_rq(i)->lock); - totalcpuusage += *cpuusage; - spin_unlock_irq(&cpu_rq(i)->lock); - } + for_each_present_cpu(i) + totalcpuusage += cpuacct_cpuusage_read(ca, i); return totalcpuusage; } @@ -9309,13 +9335,9 @@ static int cpuusage_write(struct cgroup *cgrp, struct cftype *cftype, goto out; } - for_each_possible_cpu(i) { - u64 *cpuusage = percpu_ptr(ca->cpuusage, i); + for_each_present_cpu(i) + cpuacct_cpuusage_write(ca, i, 0); - spin_lock_irq(&cpu_rq(i)->lock); - *cpuusage = 0; - spin_unlock_irq(&cpu_rq(i)->lock); - } out: return err; } -- cgit v1.2.3 From e9515c3c9feecd74174c2998add0db51e02abb8d Mon Sep 17 00:00:00 2001 From: Ken Chen Date: Mon, 15 Dec 2008 22:04:15 -0800 Subject: sched, cpuacct: export percpu cpuacct cgroup stats This patch export per-cpu CPU cycle usage for a given cpuacct cgroup. There is a need for a user space monitor daemon to track group CPU usage on per-cpu base. It is also useful for monitoring CFS load balancer behavior by tracking per CPU group usage. Signed-off-by: Ken Chen Reviewed-by: Li Zefan Reviewed-by: Andrew Morton Signed-off-by: Ingo Molnar --- kernel/sched.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/kernel/sched.c b/kernel/sched.c index 41b7e2d524d6..f53e2b8ef521 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -9342,12 +9342,32 @@ out: return err; } +static int cpuacct_percpu_seq_read(struct cgroup *cgroup, struct cftype *cft, + struct seq_file *m) +{ + struct cpuacct *ca = cgroup_ca(cgroup); + u64 percpu; + int i; + + for_each_present_cpu(i) { + percpu = cpuacct_cpuusage_read(ca, i); + seq_printf(m, "%llu ", (unsigned long long) percpu); + } + seq_printf(m, "\n"); + return 0; +} + static struct cftype files[] = { { .name = "usage", .read_u64 = cpuusage_read, .write_u64 = cpuusage_write, }, + { + .name = "usage_percpu", + .read_seq_string = cpuacct_percpu_seq_read, + }, + }; static int cpuacct_populate(struct cgroup_subsys *ss, struct cgroup *cgrp) -- cgit v1.2.3 From 80f40ee4a07530cc3acbc239a9299ec47025825b Mon Sep 17 00:00:00 2001 From: Bharata B Rao Date: Mon, 15 Dec 2008 11:56:48 +0530 Subject: sched: use RCU variant of list traversal in for_each_leaf_rt_rq() Impact: fix potential of rare crash for_each_leaf_rt_rq() walks an RCU protected list (rq->leaf_rt_rq_list), but doesn't use list_for_each_entry_rcu(). Fix this. Signed-off-by: Bharata B Rao Cc: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched_rt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index d9ba9d5f99d6..7bdf84c85ccd 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -77,7 +77,7 @@ static inline u64 sched_rt_period(struct rt_rq *rt_rq) } #define for_each_leaf_rt_rq(rt_rq, rq) \ - list_for_each_entry(rt_rq, &rq->leaf_rt_rq_list, leaf_rt_rq_list) + list_for_each_entry_rcu(rt_rq, &rq->leaf_rt_rq_list, leaf_rt_rq_list) static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq) { -- cgit v1.2.3 From 9c2c48020ec0dd6ecd27e5a1298f73b40d85a595 Mon Sep 17 00:00:00 2001 From: Ken Chen Date: Tue, 16 Dec 2008 23:41:22 -0800 Subject: schedstat: consolidate per-task cpu runtime stats Impact: simplify code When we turn on CONFIG_SCHEDSTATS, per-task cpu runtime is accumulated twice. Once in task->se.sum_exec_runtime and once in sched_info.cpu_time. These two stats are exactly the same. Given that task->se.sum_exec_runtime is always accumulated by the core scheduler, sched_info can reuse that data instead of duplicate the accounting. Signed-off-by: Ken Chen Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- fs/proc/base.c | 2 +- include/linux/sched.h | 3 +-- kernel/delayacct.c | 2 +- kernel/sched.c | 2 ++ kernel/sched_stats.h | 5 ++--- 5 files changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/proc/base.c b/fs/proc/base.c index d4677603c889..4d745bac768c 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -347,7 +347,7 @@ static int proc_pid_wchan(struct task_struct *task, char *buffer) static int proc_pid_schedstat(struct task_struct *task, char *buffer) { return sprintf(buffer, "%llu %llu %lu\n", - task->sched_info.cpu_time, + task->se.sum_exec_runtime, task->sched_info.run_delay, task->sched_info.pcount); } diff --git a/include/linux/sched.h b/include/linux/sched.h index 8cccd6dc5d66..2d1e840ddd35 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -670,8 +670,7 @@ struct reclaim_state; struct sched_info { /* cumulative counters */ unsigned long pcount; /* # of times run on this cpu */ - unsigned long long cpu_time, /* time spent on the cpu */ - run_delay; /* time spent waiting on a runqueue */ + unsigned long long run_delay; /* time spent waiting on a runqueue */ /* timestamps */ unsigned long long last_arrival,/* when we last ran on a cpu */ diff --git a/kernel/delayacct.c b/kernel/delayacct.c index b3179dad71be..abb6e17505e2 100644 --- a/kernel/delayacct.c +++ b/kernel/delayacct.c @@ -127,7 +127,7 @@ int __delayacct_add_tsk(struct taskstats *d, struct task_struct *tsk) */ t1 = tsk->sched_info.pcount; t2 = tsk->sched_info.run_delay; - t3 = tsk->sched_info.cpu_time; + t3 = tsk->se.sum_exec_runtime; d->cpu_count += t1; diff --git a/kernel/sched.c b/kernel/sched.c index f53e2b8ef521..fd835fc320b8 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -596,6 +596,8 @@ struct rq { #ifdef CONFIG_SCHEDSTATS /* latency stats */ struct sched_info rq_sched_info; + unsigned long long rq_cpu_time; + /* could above be rq->cfs_rq.exec_clock + rq->rt_rq.rt_runtime ? */ /* sys_sched_yield() stats */ unsigned int yld_exp_empty; diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h index 7dbf72a2b02c..3b01098164c8 100644 --- a/kernel/sched_stats.h +++ b/kernel/sched_stats.h @@ -31,7 +31,7 @@ static int show_schedstat(struct seq_file *seq, void *v) rq->yld_act_empty, rq->yld_exp_empty, rq->yld_count, rq->sched_switch, rq->sched_count, rq->sched_goidle, rq->ttwu_count, rq->ttwu_local, - rq->rq_sched_info.cpu_time, + rq->rq_cpu_time, rq->rq_sched_info.run_delay, rq->rq_sched_info.pcount); seq_printf(seq, "\n"); @@ -123,7 +123,7 @@ static inline void rq_sched_info_depart(struct rq *rq, unsigned long long delta) { if (rq) - rq->rq_sched_info.cpu_time += delta; + rq->rq_cpu_time += delta; } static inline void @@ -236,7 +236,6 @@ static inline void sched_info_depart(struct task_struct *t) unsigned long long delta = task_rq(t)->clock - t->sched_info.last_arrival; - t->sched_info.cpu_time += delta; rq_sched_info_depart(task_rq(t), delta); if (t->state == TASK_RUNNING) -- cgit v1.2.3 From 826e08b0157c0ce8a80dfe3c0a6c5a1540dd0b1d Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 22 Dec 2008 07:37:41 +0100 Subject: sched: fix warning in fs/proc/base.c Stephen Rothwell reported this new (harmless) build warning on platforms that define u64 to long: fs/proc/base.c: In function 'proc_pid_schedstat': fs/proc/base.c:352: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'u64' asm-generic/int-l64.h platforms strike again: that file should be eliminated. Fix it by casting the parameters to long long. Reported-by: Stephen Rothwell Signed-off-by: Ingo Molnar --- fs/proc/base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/proc/base.c b/fs/proc/base.c index 4d745bac768c..a48200c71127 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -347,8 +347,8 @@ static int proc_pid_wchan(struct task_struct *task, char *buffer) static int proc_pid_schedstat(struct task_struct *task, char *buffer) { return sprintf(buffer, "%llu %llu %lu\n", - task->se.sum_exec_runtime, - task->sched_info.run_delay, + (unsigned long long)task->se.sum_exec_runtime, + (unsigned long long)task->sched_info.run_delay, task->sched_info.pcount); } #endif -- cgit v1.2.3