From 153cca9caa81ca8912a70528daca4b9a523c6898 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 29 Jul 2021 10:21:34 +0200 Subject: platform/x86: Add and use a dual_accel_detect() helper Various 360 degree hinges (yoga) style 2-in-1 devices use 2 accelerometers to allow the OS to determine the angle between the display and the base of the device. On Windows these are read by a special HingeAngleService process which calls undocumented ACPI methods, to let the firmware know if the 2-in-1 is in tablet- or laptop-mode. The firmware may use this to disable the kbd and touchpad to avoid spurious input in tablet-mode as well as to report SW_TABLET_MODE info to the OS. Since Linux does not call these undocumented methods, the SW_TABLET_MODE info reported by various pdx86 drivers is incorrect on these devices. Before this commit the intel-hid and thinkpad_acpi code already had 2 hardcoded checks for ACPI hardware-ids of dual-accel sensors to avoid reporting broken info. And now we also have a bug-report about the same problem in the intel-vbtn code. Since there are at least 3 different ACPI hardware-ids in play, add a new dual_accel_detect() helper which checks for all 3, rather then adding different hardware-ids to the drivers as bug-reports trickle in. Having shared code which checks all known hardware-ids is esp. important for the intel-hid and intel-vbtn drivers as these are generic drivers which are used on a lot of devices. The BOSC0200 hardware-id requires special handling, because often it is used for a single-accelerometer setup. Only in a few cases it refers to a dual-accel setup, in which case there will be 2 I2cSerialBus resources in the device's resource-list, so the helper checks for this. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209011 Reported-and-tested-by: Julius Lehmann Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210729082134.6683-1-hdegoede@redhat.com --- drivers/platform/x86/Kconfig | 3 ++ drivers/platform/x86/dual_accel_detect.h | 75 ++++++++++++++++++++++++++++++++ drivers/platform/x86/intel-hid.c | 21 +++------ drivers/platform/x86/intel-vbtn.c | 18 ++++++-- drivers/platform/x86/thinkpad_acpi.c | 3 +- 5 files changed, 101 insertions(+), 19 deletions(-) create mode 100644 drivers/platform/x86/dual_accel_detect.h diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 7d385c3b2239..d12db6c316ea 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -508,6 +508,7 @@ config THINKPAD_ACPI depends on RFKILL || RFKILL = n depends on ACPI_VIDEO || ACPI_VIDEO = n depends on BACKLIGHT_CLASS_DEVICE + depends on I2C select ACPI_PLATFORM_PROFILE select HWMON select NVRAM @@ -691,6 +692,7 @@ config INTEL_HID_EVENT tristate "INTEL HID Event" depends on ACPI depends on INPUT + depends on I2C select INPUT_SPARSEKMAP help This driver provides support for the Intel HID Event hotkey interface. @@ -742,6 +744,7 @@ config INTEL_VBTN tristate "INTEL VIRTUAL BUTTON" depends on ACPI depends on INPUT + depends on I2C select INPUT_SPARSEKMAP help This driver provides support for the Intel Virtual Button interface. diff --git a/drivers/platform/x86/dual_accel_detect.h b/drivers/platform/x86/dual_accel_detect.h new file mode 100644 index 000000000000..1a069159da91 --- /dev/null +++ b/drivers/platform/x86/dual_accel_detect.h @@ -0,0 +1,75 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Helper code to detect 360 degree hinges (yoga) style 2-in-1 devices using 2 accelerometers + * to allow the OS to determine the angle between the display and the base of the device. + * + * On Windows these are read by a special HingeAngleService process which calls undocumented + * ACPI methods, to let the firmware know if the 2-in-1 is in tablet- or laptop-mode. + * The firmware may use this to disable the kbd and touchpad to avoid spurious input in + * tablet-mode as well as to report SW_TABLET_MODE info to the OS. + * + * Since Linux does not call these undocumented methods, the SW_TABLET_MODE info reported + * by various drivers/platform/x86 drivers is incorrect. These drivers use the detection + * code in this file to disable SW_TABLET_MODE reporting to avoid reporting broken info + * (instead userspace can derive the status itself by directly reading the 2 accels). + */ + +#include +#include + +static int dual_accel_i2c_resource_count(struct acpi_resource *ares, void *data) +{ + struct acpi_resource_i2c_serialbus *sb; + int *count = data; + + if (i2c_acpi_get_i2c_resource(ares, &sb)) + *count = *count + 1; + + return 1; +} + +static int dual_accel_i2c_client_count(struct acpi_device *adev) +{ + int ret, count = 0; + LIST_HEAD(r); + + ret = acpi_dev_get_resources(adev, &r, dual_accel_i2c_resource_count, &count); + if (ret < 0) + return ret; + + acpi_dev_free_resource_list(&r); + return count; +} + +static bool dual_accel_detect_bosc0200(void) +{ + struct acpi_device *adev; + int count; + + adev = acpi_dev_get_first_match_dev("BOSC0200", NULL, -1); + if (!adev) + return false; + + count = dual_accel_i2c_client_count(adev); + + acpi_dev_put(adev); + + return count == 2; +} + +static bool dual_accel_detect(void) +{ + /* Systems which use a pair of accels with KIOX010A / KIOX020A ACPI ids */ + if (acpi_dev_present("KIOX010A", NULL, -1)) + return true; + + /* Systems which use a single DUAL250E ACPI device to model 2 accels */ + if (acpi_dev_present("DUAL250E", NULL, -1)) + return true; + + /* Systems which use a single BOSC0200 ACPI device to model 2 accels */ + if (dual_accel_detect_bosc0200()) + return true; + + return false; +} diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c index e5fbe017f8e1..2e4e97a626a5 100644 --- a/drivers/platform/x86/intel-hid.c +++ b/drivers/platform/x86/intel-hid.c @@ -14,6 +14,7 @@ #include #include #include +#include "dual_accel_detect.h" /* When NOT in tablet mode, VGBS returns with the flag 0x40 */ #define TABLET_MODE_FLAG BIT(6) @@ -122,6 +123,7 @@ struct intel_hid_priv { struct input_dev *array; struct input_dev *switches; bool wakeup_mode; + bool dual_accel; }; #define HID_EVENT_FILTER_UUID "eeec56b3-4442-408f-a792-4edd4d758054" @@ -451,22 +453,9 @@ static void notify_handler(acpi_handle handle, u32 event, void *context) * SW_TABLET_MODE report, in these cases we enable support when receiving * the first event instead of during driver setup. * - * Some 360 degree hinges (yoga) style 2-in-1 devices use 2 accelerometers - * to allow the OS to determine the angle between the display and the base - * of the device. On Windows these are read by a special HingeAngleService - * process which calls an ACPI DSM (Device Specific Method) on the - * ACPI KIOX010A device node for the sensor in the display, to let the - * firmware know if the 2-in-1 is in tablet- or laptop-mode so that it can - * disable the kbd and touchpad to avoid spurious input in tablet-mode. - * - * The linux kxcjk1013 driver calls the DSM for this once at probe time - * to ensure that the builtin kbd and touchpad work. On some devices this - * causes a "spurious" 0xcd event on the intel-hid ACPI dev. In this case - * there is not a functional tablet-mode switch, so we should not register - * the tablet-mode switch device. + * See dual_accel_detect.h for more info on the dual_accel check. */ - if (!priv->switches && (event == 0xcc || event == 0xcd) && - !acpi_dev_present("KIOX010A", NULL, -1)) { + if (!priv->switches && !priv->dual_accel && (event == 0xcc || event == 0xcd)) { dev_info(&device->dev, "switch event received, enable switches supports\n"); err = intel_hid_switches_setup(device); if (err) @@ -607,6 +596,8 @@ static int intel_hid_probe(struct platform_device *device) return -ENOMEM; dev_set_drvdata(&device->dev, priv); + priv->dual_accel = dual_accel_detect(); + err = intel_hid_input_setup(device); if (err) { pr_err("Failed to setup Intel HID hotkeys\n"); diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c index 888a764efad1..309166431063 100644 --- a/drivers/platform/x86/intel-vbtn.c +++ b/drivers/platform/x86/intel-vbtn.c @@ -14,6 +14,7 @@ #include #include #include +#include "dual_accel_detect.h" /* Returned when NOT in tablet mode on some HP Stream x360 11 models */ #define VGBS_TABLET_MODE_FLAG_ALT 0x10 @@ -66,6 +67,7 @@ static const struct key_entry intel_vbtn_switchmap[] = { struct intel_vbtn_priv { struct input_dev *buttons_dev; struct input_dev *switches_dev; + bool dual_accel; bool has_buttons; bool has_switches; bool wakeup_mode; @@ -160,6 +162,10 @@ static void notify_handler(acpi_handle handle, u32 event, void *context) input_dev = priv->buttons_dev; } else if ((ke = sparse_keymap_entry_from_scancode(priv->switches_dev, event))) { if (!priv->has_switches) { + /* See dual_accel_detect.h for more info */ + if (priv->dual_accel) + return; + dev_info(&device->dev, "Registering Intel Virtual Switches input-dev after receiving a switch event\n"); ret = input_register_device(priv->switches_dev); if (ret) @@ -248,11 +254,15 @@ static const struct dmi_system_id dmi_switches_allow_list[] = { {} /* Array terminator */ }; -static bool intel_vbtn_has_switches(acpi_handle handle) +static bool intel_vbtn_has_switches(acpi_handle handle, bool dual_accel) { unsigned long long vgbs; acpi_status status; + /* See dual_accel_detect.h for more info */ + if (dual_accel) + return false; + if (!dmi_check_system(dmi_switches_allow_list)) return false; @@ -263,13 +273,14 @@ static bool intel_vbtn_has_switches(acpi_handle handle) static int intel_vbtn_probe(struct platform_device *device) { acpi_handle handle = ACPI_HANDLE(&device->dev); - bool has_buttons, has_switches; + bool dual_accel, has_buttons, has_switches; struct intel_vbtn_priv *priv; acpi_status status; int err; + dual_accel = dual_accel_detect(); has_buttons = acpi_has_method(handle, "VBDL"); - has_switches = intel_vbtn_has_switches(handle); + has_switches = intel_vbtn_has_switches(handle, dual_accel); if (!has_buttons && !has_switches) { dev_warn(&device->dev, "failed to read Intel Virtual Button driver\n"); @@ -281,6 +292,7 @@ static int intel_vbtn_probe(struct platform_device *device) return -ENOMEM; dev_set_drvdata(&device->dev, priv); + priv->dual_accel = dual_accel; priv->has_buttons = has_buttons; priv->has_switches = has_switches; diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 603156a6e3ed..50ff04c84650 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -73,6 +73,7 @@ #include #include #include +#include "dual_accel_detect.h" /* ThinkPad CMOS commands */ #define TP_CMOS_VOLUME_DOWN 0 @@ -3232,7 +3233,7 @@ static int hotkey_init_tablet_mode(void) * the laptop/tent/tablet mode to the EC. The bmc150 iio driver * does not support this, so skip the hotkey on these models. */ - if (has_tablet_mode && !acpi_dev_present("BOSC0200", "1", -1)) + if (has_tablet_mode && !dual_accel_detect()) tp_features.hotkey_tablet = TP_HOTKEY_TABLET_USES_GMMS; type = "GMMS"; } else if (acpi_evalf(hkey_handle, &res, "MHKG", "qd")) { -- cgit v1.2.3 From 085fc31f81765e061c78cdcab0e5516fd672bff7 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 2 Aug 2021 16:10:00 +0200 Subject: platform/x86: Make dual_accel_detect() KIOX010A + KIOX020A detect more robust 360 degree hinges devices with dual KIOX010A + KIOX020A accelerometers always have both a KIOX010A and a KIOX020A ACPI device (one for each accel). Theoretical some vendor may re-use some DSDT for a non-convertible stripping out just the KIOX020A ACPI device from the DSDT. Check that both ACPI devices are present to make the check more robust. Fixes: 153cca9caa81 ("platform/x86: Add and use a dual_accel_detect() helper") Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210802141000.978035-1-hdegoede@redhat.com --- drivers/platform/x86/dual_accel_detect.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/dual_accel_detect.h b/drivers/platform/x86/dual_accel_detect.h index 1a069159da91..a9eae17cc43d 100644 --- a/drivers/platform/x86/dual_accel_detect.h +++ b/drivers/platform/x86/dual_accel_detect.h @@ -60,7 +60,8 @@ static bool dual_accel_detect_bosc0200(void) static bool dual_accel_detect(void) { /* Systems which use a pair of accels with KIOX010A / KIOX020A ACPI ids */ - if (acpi_dev_present("KIOX010A", NULL, -1)) + if (acpi_dev_present("KIOX010A", NULL, -1) && + acpi_dev_present("KIOX020A", NULL, -1)) return true; /* Systems which use a single DUAL250E ACPI device to model 2 accels */ -- cgit v1.2.3 From 9d7b132e62e41b7d49bf157aeaf9147c27492e0f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 6 Aug 2021 13:55:15 +0200 Subject: platform/x86: pcengines-apuv2: Add missing terminating entries to gpio-lookup tables The gpiod_lookup_table.table passed to gpiod_add_lookup_table() must be terminated with an empty entry, add this. Note we have likely been getting away with this not being present because the GPIO lookup code first matches on the dev_id, causing most lookups to skip checking the table and the lookups which do check the table will find a matching entry before reaching the end. With that said, terminating these tables properly still is obviously the correct thing to do. Fixes: f8eb0235f659 ("x86: pcengines apuv2 gpio/leds/keys platform driver") Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210806115515.12184-1-hdegoede@redhat.com --- drivers/platform/x86/pcengines-apuv2.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/platform/x86/pcengines-apuv2.c b/drivers/platform/x86/pcengines-apuv2.c index c37349f97bb8..d063d91db9bc 100644 --- a/drivers/platform/x86/pcengines-apuv2.c +++ b/drivers/platform/x86/pcengines-apuv2.c @@ -94,6 +94,7 @@ static struct gpiod_lookup_table gpios_led_table = { NULL, 1, GPIO_ACTIVE_LOW), GPIO_LOOKUP_IDX(AMD_FCH_GPIO_DRIVER_NAME, APU2_GPIO_LINE_LED3, NULL, 2, GPIO_ACTIVE_LOW), + {} /* Terminating entry */ } }; @@ -123,6 +124,7 @@ static struct gpiod_lookup_table gpios_key_table = { .table = { GPIO_LOOKUP_IDX(AMD_FCH_GPIO_DRIVER_NAME, APU2_GPIO_LINE_MODESW, NULL, 0, GPIO_ACTIVE_LOW), + {} /* Terminating entry */ } }; -- cgit v1.2.3