From 9b5db89ea4bfdbb23d4f85f3a7fbf2cd36d20146 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 28 Jun 2019 18:23:13 -0300 Subject: docs: misc-devices: convert files without extension to ReST Those files are also text files. Convert them to ReST and add to the misc-files index.rst. Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/b7dc829809673bd8cffe0e7bbe9c9308681c6fe2.1561756511.git.mchehab+samsung@kernel.org Signed-off-by: Greg Kroah-Hartman --- Documentation/misc-devices/eeprom | 96 --------------------- Documentation/misc-devices/eeprom.rst | 107 +++++++++++++++++++++++ Documentation/misc-devices/ics932s401 | 31 ------- Documentation/misc-devices/ics932s401.rst | 36 ++++++++ Documentation/misc-devices/index.rst | 5 ++ Documentation/misc-devices/isl29003 | 62 -------------- Documentation/misc-devices/isl29003.rst | 75 ++++++++++++++++ Documentation/misc-devices/lis3lv02d | 93 -------------------- Documentation/misc-devices/lis3lv02d.rst | 99 ++++++++++++++++++++++ Documentation/misc-devices/max6875 | 110 ------------------------ Documentation/misc-devices/max6875.rst | 136 ++++++++++++++++++++++++++++++ MAINTAINERS | 4 +- drivers/misc/isl29003.c | 2 +- drivers/platform/x86/Kconfig | 2 +- 14 files changed, 462 insertions(+), 396 deletions(-) delete mode 100644 Documentation/misc-devices/eeprom create mode 100644 Documentation/misc-devices/eeprom.rst delete mode 100644 Documentation/misc-devices/ics932s401 create mode 100644 Documentation/misc-devices/ics932s401.rst delete mode 100644 Documentation/misc-devices/isl29003 create mode 100644 Documentation/misc-devices/isl29003.rst delete mode 100644 Documentation/misc-devices/lis3lv02d create mode 100644 Documentation/misc-devices/lis3lv02d.rst delete mode 100644 Documentation/misc-devices/max6875 create mode 100644 Documentation/misc-devices/max6875.rst diff --git a/Documentation/misc-devices/eeprom b/Documentation/misc-devices/eeprom deleted file mode 100644 index ba692011f221..000000000000 --- a/Documentation/misc-devices/eeprom +++ /dev/null @@ -1,96 +0,0 @@ -Kernel driver eeprom -==================== - -Supported chips: - * Any EEPROM chip in the designated address range - Prefix: 'eeprom' - Addresses scanned: I2C 0x50 - 0x57 - Datasheets: Publicly available from: - Atmel (www.atmel.com), - Catalyst (www.catsemi.com), - Fairchild (www.fairchildsemi.com), - Microchip (www.microchip.com), - Philips (www.semiconductor.philips.com), - Rohm (www.rohm.com), - ST (www.st.com), - Xicor (www.xicor.com), - and others. - - Chip Size (bits) Address - 24C01 1K 0x50 (shadows at 0x51 - 0x57) - 24C01A 1K 0x50 - 0x57 (Typical device on DIMMs) - 24C02 2K 0x50 - 0x57 - 24C04 4K 0x50, 0x52, 0x54, 0x56 - (additional data at 0x51, 0x53, 0x55, 0x57) - 24C08 8K 0x50, 0x54 (additional data at 0x51, 0x52, - 0x53, 0x55, 0x56, 0x57) - 24C16 16K 0x50 (additional data at 0x51 - 0x57) - Sony 2K 0x57 - - Atmel 34C02B 2K 0x50 - 0x57, SW write protect at 0x30-37 - Catalyst 34FC02 2K 0x50 - 0x57, SW write protect at 0x30-37 - Catalyst 34RC02 2K 0x50 - 0x57, SW write protect at 0x30-37 - Fairchild 34W02 2K 0x50 - 0x57, SW write protect at 0x30-37 - Microchip 24AA52 2K 0x50 - 0x57, SW write protect at 0x30-37 - ST M34C02 2K 0x50 - 0x57, SW write protect at 0x30-37 - - -Authors: - Frodo Looijaard , - Philip Edelbrock , - Jean Delvare , - Greg Kroah-Hartman , - IBM Corp. - -Description ------------ - -This is a simple EEPROM module meant to enable reading the first 256 bytes -of an EEPROM (on a SDRAM DIMM for example). However, it will access serial -EEPROMs on any I2C adapter. The supported devices are generically called -24Cxx, and are listed above; however the numbering for these -industry-standard devices may vary by manufacturer. - -This module was a programming exercise to get used to the new project -organization laid out by Frodo, but it should be at least completely -effective for decoding the contents of EEPROMs on DIMMs. - -DIMMS will typically contain a 24C01A or 24C02, or the 34C02 variants. -The other devices will not be found on a DIMM because they respond to more -than one address. - -DDC Monitors may contain any device. Often a 24C01, which responds to all 8 -addresses, is found. - -Recent Sony Vaio laptops have an EEPROM at 0x57. We couldn't get the -specification, so it is guess work and far from being complete. - -The Microchip 24AA52/24LCS52, ST M34C02, and others support an additional -software write protect register at 0x30 - 0x37 (0x20 less than the memory -location). The chip responds to "write quick" detection at this address but -does not respond to byte reads. If this register is present, the lower 128 -bytes of the memory array are not write protected. Any byte data write to -this address will write protect the memory array permanently, and the -device will no longer respond at the 0x30-37 address. The eeprom driver -does not support this register. - -Lacking functionality: - -* Full support for larger devices (24C04, 24C08, 24C16). These are not -typically found on a PC. These devices will appear as separate devices at -multiple addresses. - -* Support for really large devices (24C32, 24C64, 24C128, 24C256, 24C512). -These devices require two-byte address fields and are not supported. - -* Enable Writing. Again, no technical reason why not, but making it easy -to change the contents of the EEPROMs (on DIMMs anyway) also makes it easy -to disable the DIMMs (potentially preventing the computer from booting) -until the values are restored somehow. - -Use: - -After inserting the module (and any other required SMBus/i2c modules), you -should have some EEPROM directories in /sys/bus/i2c/devices/* of names such -as "0-0050". Inside each of these is a series of files, the eeprom file -contains the binary data from EEPROM. diff --git a/Documentation/misc-devices/eeprom.rst b/Documentation/misc-devices/eeprom.rst new file mode 100644 index 000000000000..008249675ccc --- /dev/null +++ b/Documentation/misc-devices/eeprom.rst @@ -0,0 +1,107 @@ +==================== +Kernel driver eeprom +==================== + +Supported chips: + + * Any EEPROM chip in the designated address range + + Prefix: 'eeprom' + + Addresses scanned: I2C 0x50 - 0x57 + + Datasheets: Publicly available from: + + Atmel (www.atmel.com), + Catalyst (www.catsemi.com), + Fairchild (www.fairchildsemi.com), + Microchip (www.microchip.com), + Philips (www.semiconductor.philips.com), + Rohm (www.rohm.com), + ST (www.st.com), + Xicor (www.xicor.com), + and others. + + ========= ============= ============================================ + Chip Size (bits) Address + ========= ============= ============================================ + 24C01 1K 0x50 (shadows at 0x51 - 0x57) + 24C01A 1K 0x50 - 0x57 (Typical device on DIMMs) + 24C02 2K 0x50 - 0x57 + 24C04 4K 0x50, 0x52, 0x54, 0x56 + (additional data at 0x51, 0x53, 0x55, 0x57) + 24C08 8K 0x50, 0x54 (additional data at 0x51, 0x52, + 0x53, 0x55, 0x56, 0x57) + 24C16 16K 0x50 (additional data at 0x51 - 0x57) + Sony 2K 0x57 + + Atmel 34C02B 2K 0x50 - 0x57, SW write protect at 0x30-37 + Catalyst 34FC02 2K 0x50 - 0x57, SW write protect at 0x30-37 + Catalyst 34RC02 2K 0x50 - 0x57, SW write protect at 0x30-37 + Fairchild 34W02 2K 0x50 - 0x57, SW write protect at 0x30-37 + Microchip 24AA52 2K 0x50 - 0x57, SW write protect at 0x30-37 + ST M34C02 2K 0x50 - 0x57, SW write protect at 0x30-37 + ========= ============= ============================================ + + +Authors: + - Frodo Looijaard , + - Philip Edelbrock , + - Jean Delvare , + - Greg Kroah-Hartman , + - IBM Corp. + +Description +----------- + +This is a simple EEPROM module meant to enable reading the first 256 bytes +of an EEPROM (on a SDRAM DIMM for example). However, it will access serial +EEPROMs on any I2C adapter. The supported devices are generically called +24Cxx, and are listed above; however the numbering for these +industry-standard devices may vary by manufacturer. + +This module was a programming exercise to get used to the new project +organization laid out by Frodo, but it should be at least completely +effective for decoding the contents of EEPROMs on DIMMs. + +DIMMS will typically contain a 24C01A or 24C02, or the 34C02 variants. +The other devices will not be found on a DIMM because they respond to more +than one address. + +DDC Monitors may contain any device. Often a 24C01, which responds to all 8 +addresses, is found. + +Recent Sony Vaio laptops have an EEPROM at 0x57. We couldn't get the +specification, so it is guess work and far from being complete. + +The Microchip 24AA52/24LCS52, ST M34C02, and others support an additional +software write protect register at 0x30 - 0x37 (0x20 less than the memory +location). The chip responds to "write quick" detection at this address but +does not respond to byte reads. If this register is present, the lower 128 +bytes of the memory array are not write protected. Any byte data write to +this address will write protect the memory array permanently, and the +device will no longer respond at the 0x30-37 address. The eeprom driver +does not support this register. + +Lacking functionality +--------------------- + +* Full support for larger devices (24C04, 24C08, 24C16). These are not + typically found on a PC. These devices will appear as separate devices at + multiple addresses. + +* Support for really large devices (24C32, 24C64, 24C128, 24C256, 24C512). + These devices require two-byte address fields and are not supported. + +* Enable Writing. Again, no technical reason why not, but making it easy + to change the contents of the EEPROMs (on DIMMs anyway) also makes it easy + to disable the DIMMs (potentially preventing the computer from booting) + until the values are restored somehow. + +Use +--- + +After inserting the module (and any other required SMBus/i2c modules), you +should have some EEPROM directories in ``/sys/bus/i2c/devices/*`` of names such +as "0-0050". Inside each of these is a series of files, the eeprom file +contains the binary data from EEPROM. diff --git a/Documentation/misc-devices/ics932s401 b/Documentation/misc-devices/ics932s401 deleted file mode 100644 index bdac67ff6e3f..000000000000 --- a/Documentation/misc-devices/ics932s401 +++ /dev/null @@ -1,31 +0,0 @@ -Kernel driver ics932s401 -====================== - -Supported chips: - * IDT ICS932S401 - Prefix: 'ics932s401' - Addresses scanned: I2C 0x69 - Datasheet: Publicly available at the IDT website - -Author: Darrick J. Wong - -Description ------------ - -This driver implements support for the IDT ICS932S401 chip family. - -This chip has 4 clock outputs--a base clock for the CPU (which is likely -multiplied to get the real CPU clock), a system clock, a PCI clock, a USB -clock, and a reference clock. The driver reports selected and actual -frequency. If spread spectrum mode is enabled, the driver also reports by what -percent the clock signal is being spread, which should be between 0 and -0.5%. -All frequencies are reported in KHz. - -The ICS932S401 monitors all inputs continuously. The driver will not read -the registers more often than once every other second. - -Special Features ----------------- - -The clocks could be reprogrammed to increase system speed. I will not help you -do this, as you risk damaging your system! diff --git a/Documentation/misc-devices/ics932s401.rst b/Documentation/misc-devices/ics932s401.rst new file mode 100644 index 000000000000..613ee54a9c21 --- /dev/null +++ b/Documentation/misc-devices/ics932s401.rst @@ -0,0 +1,36 @@ +======================== +Kernel driver ics932s401 +======================== + +Supported chips: + + * IDT ICS932S401 + + Prefix: 'ics932s401' + + Addresses scanned: I2C 0x69 + + Datasheet: Publicly available at the IDT website + +Author: Darrick J. Wong + +Description +----------- + +This driver implements support for the IDT ICS932S401 chip family. + +This chip has 4 clock outputs--a base clock for the CPU (which is likely +multiplied to get the real CPU clock), a system clock, a PCI clock, a USB +clock, and a reference clock. The driver reports selected and actual +frequency. If spread spectrum mode is enabled, the driver also reports by what +percent the clock signal is being spread, which should be between 0 and -0.5%. +All frequencies are reported in KHz. + +The ICS932S401 monitors all inputs continuously. The driver will not read +the registers more often than once every other second. + +Special Features +---------------- + +The clocks could be reprogrammed to increase system speed. I will not help you +do this, as you risk damaging your system! diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst index dfd1f45a3127..a57f92dfe49a 100644 --- a/Documentation/misc-devices/index.rst +++ b/Documentation/misc-devices/index.rst @@ -14,4 +14,9 @@ fit into other categories. .. toctree:: :maxdepth: 2 + eeprom ibmvmc + ics932s401 + isl29003 + lis3lv02d + max6875 diff --git a/Documentation/misc-devices/isl29003 b/Documentation/misc-devices/isl29003 deleted file mode 100644 index 80b952fd32ff..000000000000 --- a/Documentation/misc-devices/isl29003 +++ /dev/null @@ -1,62 +0,0 @@ -Kernel driver isl29003 -===================== - -Supported chips: -* Intersil ISL29003 -Prefix: 'isl29003' -Addresses scanned: none -Datasheet: -http://www.intersil.com/data/fn/fn7464.pdf - -Author: Daniel Mack - - -Description ------------ -The ISL29003 is an integrated light sensor with a 16-bit integrating type -ADC, I2C user programmable lux range select for optimized counts/lux, and -I2C multi-function control and monitoring capabilities. The internal ADC -provides 16-bit resolution while rejecting 50Hz and 60Hz flicker caused by -artificial light sources. - -The driver allows to set the lux range, the bit resolution, the operational -mode (see below) and the power state of device and can read the current lux -value, of course. - - -Detection ---------- - -The ISL29003 does not have an ID register which could be used to identify -it, so the detection routine will just try to read from the configured I2C -address and consider the device to be present as soon as it ACKs the -transfer. - - -Sysfs entries -------------- - -range: - 0: 0 lux to 1000 lux (default) - 1: 0 lux to 4000 lux - 2: 0 lux to 16,000 lux - 3: 0 lux to 64,000 lux - -resolution: - 0: 2^16 cycles (default) - 1: 2^12 cycles - 2: 2^8 cycles - 3: 2^4 cycles - -mode: - 0: diode1's current (unsigned 16bit) (default) - 1: diode1's current (unsigned 16bit) - 2: difference between diodes (l1 - l2, signed 15bit) - -power_state: - 0: device is disabled (default) - 1: device is enabled - -lux (read only): - returns the value from the last sensor reading - diff --git a/Documentation/misc-devices/isl29003.rst b/Documentation/misc-devices/isl29003.rst new file mode 100644 index 000000000000..0cc38aed6c00 --- /dev/null +++ b/Documentation/misc-devices/isl29003.rst @@ -0,0 +1,75 @@ +====================== +Kernel driver isl29003 +====================== + +Supported chips: + +* Intersil ISL29003 + +Prefix: 'isl29003' + +Addresses scanned: none + +Datasheet: +http://www.intersil.com/data/fn/fn7464.pdf + +Author: Daniel Mack + + +Description +----------- +The ISL29003 is an integrated light sensor with a 16-bit integrating type +ADC, I2C user programmable lux range select for optimized counts/lux, and +I2C multi-function control and monitoring capabilities. The internal ADC +provides 16-bit resolution while rejecting 50Hz and 60Hz flicker caused by +artificial light sources. + +The driver allows to set the lux range, the bit resolution, the operational +mode (see below) and the power state of device and can read the current lux +value, of course. + + +Detection +--------- + +The ISL29003 does not have an ID register which could be used to identify +it, so the detection routine will just try to read from the configured I2C +address and consider the device to be present as soon as it ACKs the +transfer. + + +Sysfs entries +------------- + +range: + == =========================== + 0: 0 lux to 1000 lux (default) + 1: 0 lux to 4000 lux + 2: 0 lux to 16,000 lux + 3: 0 lux to 64,000 lux + == =========================== + +resolution: + == ===================== + 0: 2^16 cycles (default) + 1: 2^12 cycles + 2: 2^8 cycles + 3: 2^4 cycles + == ===================== + +mode: + == ================================================= + 0: diode1's current (unsigned 16bit) (default) + 1: diode1's current (unsigned 16bit) + 2: difference between diodes (l1 - l2, signed 15bit) + == ================================================= + +power_state: + == ================================================= + 0: device is disabled (default) + 1: device is enabled + == ================================================= + +lux (read only): + returns the value from the last sensor reading + diff --git a/Documentation/misc-devices/lis3lv02d b/Documentation/misc-devices/lis3lv02d deleted file mode 100644 index f89960a0ff95..000000000000 --- a/Documentation/misc-devices/lis3lv02d +++ /dev/null @@ -1,93 +0,0 @@ -Kernel driver lis3lv02d -======================= - -Supported chips: - - * STMicroelectronics LIS3LV02DL, LIS3LV02DQ (12 bits precision) - * STMicroelectronics LIS302DL, LIS3L02DQ, LIS331DL (8 bits) and - LIS331DLH (16 bits) - -Authors: - Yan Burman - Eric Piel - - -Description ------------ - -This driver provides support for the accelerometer found in various HP laptops -sporting the feature officially called "HP Mobile Data Protection System 3D" or -"HP 3D DriveGuard". It detects automatically laptops with this sensor. Known -models (full list can be found in drivers/platform/x86/hp_accel.c) will have -their axis automatically oriented on standard way (eg: you can directly play -neverball). The accelerometer data is readable via -/sys/devices/platform/lis3lv02d. Reported values are scaled -to mg values (1/1000th of earth gravity). - -Sysfs attributes under /sys/devices/platform/lis3lv02d/: -position - 3D position that the accelerometer reports. Format: "(x,y,z)" -rate - read reports the sampling rate of the accelerometer device in HZ. - write changes sampling rate of the accelerometer device. - Only values which are supported by HW are accepted. -selftest - performs selftest for the chip as specified by chip manufacturer. - -This driver also provides an absolute input class device, allowing -the laptop to act as a pinball machine-esque joystick. Joystick device can be -calibrated. Joystick device can be in two different modes. -By default output values are scaled between -32768 .. 32767. In joystick raw -mode, joystick and sysfs position entry have the same scale. There can be -small difference due to input system fuzziness feature. -Events are also available as input event device. - -Selftest is meant only for hardware diagnostic purposes. It is not meant to be -used during normal operations. Position data is not corrupted during selftest -but interrupt behaviour is not guaranteed to work reliably. In test mode, the -sensing element is internally moved little bit. Selftest measures difference -between normal mode and test mode. Chip specifications tell the acceptance -limit for each type of the chip. Limits are provided via platform data -to allow adjustment of the limits without a change to the actual driver. -Seltest returns either "OK x y z" or "FAIL x y z" where x, y and z are -measured difference between modes. Axes are not remapped in selftest mode. -Measurement values are provided to help HW diagnostic applications to make -final decision. - -On HP laptops, if the led infrastructure is activated, support for a led -indicating disk protection will be provided as /sys/class/leds/hp::hddprotect. - -Another feature of the driver is misc device called "freefall" that -acts similar to /dev/rtc and reacts on free-fall interrupts received -from the device. It supports blocking operations, poll/select and -fasync operation modes. You must read 1 bytes from the device. The -result is number of free-fall interrupts since the last successful -read (or 255 if number of interrupts would not fit). See the freefall.c -file for an example on using the device. - - -Axes orientation ----------------- - -For better compatibility between the various laptops. The values reported by -the accelerometer are converted into a "standard" organisation of the axes -(aka "can play neverball out of the box"): - * When the laptop is horizontal the position reported is about 0 for X and Y - and a positive value for Z - * If the left side is elevated, X increases (becomes positive) - * If the front side (where the touchpad is) is elevated, Y decreases - (becomes negative) - * If the laptop is put upside-down, Z becomes negative - -If your laptop model is not recognized (cf "dmesg"), you can send an -email to the maintainer to add it to the database. When reporting a new -laptop, please include the output of "dmidecode" plus the value of -/sys/devices/platform/lis3lv02d/position in these four cases. - -Q&A ---- - -Q: How do I safely simulate freefall? I have an HP "portable -workstation" which has about 3.5kg and a plastic case, so letting it -fall to the ground is out of question... - -A: The sensor is pretty sensitive, so your hands can do it. Lift it -into free space, follow the fall with your hands for like 10 -centimeters. That should be enough to trigger the detection. diff --git a/Documentation/misc-devices/lis3lv02d.rst b/Documentation/misc-devices/lis3lv02d.rst new file mode 100644 index 000000000000..959bd2b822cf --- /dev/null +++ b/Documentation/misc-devices/lis3lv02d.rst @@ -0,0 +1,99 @@ +======================= +Kernel driver lis3lv02d +======================= + +Supported chips: + + * STMicroelectronics LIS3LV02DL, LIS3LV02DQ (12 bits precision) + * STMicroelectronics LIS302DL, LIS3L02DQ, LIS331DL (8 bits) and + LIS331DLH (16 bits) + +Authors: + - Yan Burman + - Eric Piel + + +Description +----------- + +This driver provides support for the accelerometer found in various HP laptops +sporting the feature officially called "HP Mobile Data Protection System 3D" or +"HP 3D DriveGuard". It detects automatically laptops with this sensor. Known +models (full list can be found in drivers/platform/x86/hp_accel.c) will have +their axis automatically oriented on standard way (eg: you can directly play +neverball). The accelerometer data is readable via +/sys/devices/platform/lis3lv02d. Reported values are scaled +to mg values (1/1000th of earth gravity). + +Sysfs attributes under /sys/devices/platform/lis3lv02d/: + +position + - 3D position that the accelerometer reports. Format: "(x,y,z)" +rate + - read reports the sampling rate of the accelerometer device in HZ. + write changes sampling rate of the accelerometer device. + Only values which are supported by HW are accepted. +selftest + - performs selftest for the chip as specified by chip manufacturer. + +This driver also provides an absolute input class device, allowing +the laptop to act as a pinball machine-esque joystick. Joystick device can be +calibrated. Joystick device can be in two different modes. +By default output values are scaled between -32768 .. 32767. In joystick raw +mode, joystick and sysfs position entry have the same scale. There can be +small difference due to input system fuzziness feature. +Events are also available as input event device. + +Selftest is meant only for hardware diagnostic purposes. It is not meant to be +used during normal operations. Position data is not corrupted during selftest +but interrupt behaviour is not guaranteed to work reliably. In test mode, the +sensing element is internally moved little bit. Selftest measures difference +between normal mode and test mode. Chip specifications tell the acceptance +limit for each type of the chip. Limits are provided via platform data +to allow adjustment of the limits without a change to the actual driver. +Seltest returns either "OK x y z" or "FAIL x y z" where x, y and z are +measured difference between modes. Axes are not remapped in selftest mode. +Measurement values are provided to help HW diagnostic applications to make +final decision. + +On HP laptops, if the led infrastructure is activated, support for a led +indicating disk protection will be provided as /sys/class/leds/hp::hddprotect. + +Another feature of the driver is misc device called "freefall" that +acts similar to /dev/rtc and reacts on free-fall interrupts received +from the device. It supports blocking operations, poll/select and +fasync operation modes. You must read 1 bytes from the device. The +result is number of free-fall interrupts since the last successful +read (or 255 if number of interrupts would not fit). See the freefall.c +file for an example on using the device. + + +Axes orientation +---------------- + +For better compatibility between the various laptops. The values reported by +the accelerometer are converted into a "standard" organisation of the axes +(aka "can play neverball out of the box"): + + * When the laptop is horizontal the position reported is about 0 for X and Y + and a positive value for Z + * If the left side is elevated, X increases (becomes positive) + * If the front side (where the touchpad is) is elevated, Y decreases + (becomes negative) + * If the laptop is put upside-down, Z becomes negative + +If your laptop model is not recognized (cf "dmesg"), you can send an +email to the maintainer to add it to the database. When reporting a new +laptop, please include the output of "dmidecode" plus the value of +/sys/devices/platform/lis3lv02d/position in these four cases. + +Q&A +--- + +Q: How do I safely simulate freefall? I have an HP "portable +workstation" which has about 3.5kg and a plastic case, so letting it +fall to the ground is out of question... + +A: The sensor is pretty sensitive, so your hands can do it. Lift it +into free space, follow the fall with your hands for like 10 +centimeters. That should be enough to trigger the detection. diff --git a/Documentation/misc-devices/max6875 b/Documentation/misc-devices/max6875 deleted file mode 100644 index 2f2bd0b17b5d..000000000000 --- a/Documentation/misc-devices/max6875 +++ /dev/null @@ -1,110 +0,0 @@ -Kernel driver max6875 -===================== - -Supported chips: - * Maxim MAX6874, MAX6875 - Prefix: 'max6875' - Addresses scanned: None (see below) - Datasheet: - http://pdfserv.maxim-ic.com/en/ds/MAX6874-MAX6875.pdf - -Author: Ben Gardner - - -Description ------------ - -The Maxim MAX6875 is an EEPROM-programmable power-supply sequencer/supervisor. -It provides timed outputs that can be used as a watchdog, if properly wired. -It also provides 512 bytes of user EEPROM. - -At reset, the MAX6875 reads the configuration EEPROM into its configuration -registers. The chip then begins to operate according to the values in the -registers. - -The Maxim MAX6874 is a similar, mostly compatible device, with more inputs -and outputs: - vin gpi vout -MAX6874 6 4 8 -MAX6875 4 3 5 - -See the datasheet for more information. - - -Sysfs entries -------------- - -eeprom - 512 bytes of user-defined EEPROM space. - - -General Remarks ---------------- - -Valid addresses for the MAX6875 are 0x50 and 0x52. -Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56. -The driver does not probe any address, so you explicitly instantiate the -devices. - -Example: -$ modprobe max6875 -$ echo max6875 0x50 > /sys/bus/i2c/devices/i2c-0/new_device - -The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple -addresses. For example, for address 0x50, it also reserves 0x51. -The even-address instance is called 'max6875', the odd one is 'dummy'. - - -Programming the chip using i2c-dev ----------------------------------- - -Use the i2c-dev interface to access and program the chips. -Reads and writes are performed differently depending on the address range. - -The configuration registers are at addresses 0x00 - 0x45. -Use i2c_smbus_write_byte_data() to write a register and -i2c_smbus_read_byte_data() to read a register. -The command is the register number. - -Examples: -To write a 1 to register 0x45: - i2c_smbus_write_byte_data(fd, 0x45, 1); - -To read register 0x45: - value = i2c_smbus_read_byte_data(fd, 0x45); - - -The configuration EEPROM is at addresses 0x8000 - 0x8045. -The user EEPROM is at addresses 0x8100 - 0x82ff. - -Use i2c_smbus_write_word_data() to write a byte to EEPROM. - -The command is the upper byte of the address: 0x80, 0x81, or 0x82. -The data word is the lower part of the address or'd with data << 8. - cmd = address >> 8; - val = (address & 0xff) | (data << 8); - -Example: -To write 0x5a to address 0x8003: - i2c_smbus_write_word_data(fd, 0x80, 0x5a03); - - -Reading data from the EEPROM is a little more complicated. -Use i2c_smbus_write_byte_data() to set the read address and then -i2c_smbus_read_byte() or i2c_smbus_read_i2c_block_data() to read the data. - -Example: -To read data starting at offset 0x8100, first set the address: - i2c_smbus_write_byte_data(fd, 0x81, 0x00); - -And then read the data - value = i2c_smbus_read_byte(fd); - - or - - count = i2c_smbus_read_i2c_block_data(fd, 0x84, 16, buffer); - -The block read should read 16 bytes. -0x84 is the block read command. - -See the datasheet for more details. - diff --git a/Documentation/misc-devices/max6875.rst b/Documentation/misc-devices/max6875.rst new file mode 100644 index 000000000000..ad419ac22a5b --- /dev/null +++ b/Documentation/misc-devices/max6875.rst @@ -0,0 +1,136 @@ +===================== +Kernel driver max6875 +===================== + +Supported chips: + + * Maxim MAX6874, MAX6875 + + Prefix: 'max6875' + + Addresses scanned: None (see below) + + Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6874-MAX6875.pdf + +Author: Ben Gardner + + +Description +----------- + +The Maxim MAX6875 is an EEPROM-programmable power-supply sequencer/supervisor. +It provides timed outputs that can be used as a watchdog, if properly wired. +It also provides 512 bytes of user EEPROM. + +At reset, the MAX6875 reads the configuration EEPROM into its configuration +registers. The chip then begins to operate according to the values in the +registers. + +The Maxim MAX6874 is a similar, mostly compatible device, with more inputs +and outputs: + +=========== === === ==== +- vin gpi vout +=========== === === ==== +MAX6874 6 4 8 +MAX6875 4 3 5 +=========== === === ==== + +See the datasheet for more information. + + +Sysfs entries +------------- + +eeprom - 512 bytes of user-defined EEPROM space. + + +General Remarks +--------------- + +Valid addresses for the MAX6875 are 0x50 and 0x52. + +Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56. + +The driver does not probe any address, so you explicitly instantiate the +devices. + +Example:: + + $ modprobe max6875 + $ echo max6875 0x50 > /sys/bus/i2c/devices/i2c-0/new_device + +The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple +addresses. For example, for address 0x50, it also reserves 0x51. +The even-address instance is called 'max6875', the odd one is 'dummy'. + + +Programming the chip using i2c-dev +---------------------------------- + +Use the i2c-dev interface to access and program the chips. + +Reads and writes are performed differently depending on the address range. + +The configuration registers are at addresses 0x00 - 0x45. + +Use i2c_smbus_write_byte_data() to write a register and +i2c_smbus_read_byte_data() to read a register. + +The command is the register number. + +Examples: + +To write a 1 to register 0x45:: + + i2c_smbus_write_byte_data(fd, 0x45, 1); + +To read register 0x45:: + + value = i2c_smbus_read_byte_data(fd, 0x45); + + +The configuration EEPROM is at addresses 0x8000 - 0x8045. + +The user EEPROM is at addresses 0x8100 - 0x82ff. + +Use i2c_smbus_write_word_data() to write a byte to EEPROM. + +The command is the upper byte of the address: 0x80, 0x81, or 0x82. +The data word is the lower part of the address or'd with data << 8:: + + cmd = address >> 8; + val = (address & 0xff) | (data << 8); + +Example: + +To write 0x5a to address 0x8003:: + + i2c_smbus_write_word_data(fd, 0x80, 0x5a03); + + +Reading data from the EEPROM is a little more complicated. + +Use i2c_smbus_write_byte_data() to set the read address and then +i2c_smbus_read_byte() or i2c_smbus_read_i2c_block_data() to read the data. + +Example: + +To read data starting at offset 0x8100, first set the address:: + + i2c_smbus_write_byte_data(fd, 0x81, 0x00); + +And then read the data:: + + value = i2c_smbus_read_byte(fd); + +or:: + + count = i2c_smbus_read_i2c_block_data(fd, 0x84, 16, buffer); + +The block read should read 16 bytes. + +0x84 is the block read command. + +See the datasheet for more details. + diff --git a/MAINTAINERS b/MAINTAINERS index 59e6670c9576..1fc7bafe1d75 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8871,7 +8871,7 @@ F: include/linux/leds.h LEGACY EEPROM DRIVER M: Jean Delvare S: Maintained -F: Documentation/misc-devices/eeprom +F: Documentation/misc-devices/eeprom.rst F: drivers/misc/eeprom/eeprom.c LEGO MINDSTORMS EV3 @@ -9157,7 +9157,7 @@ F: Documentation/memory-barriers.txt LIS3LV02D ACCELEROMETER DRIVER M: Eric Piel S: Maintained -F: Documentation/misc-devices/lis3lv02d +F: Documentation/misc-devices/lis3lv02d.rst F: drivers/misc/lis3lv02d/ F: drivers/platform/x86/hp_accel.c diff --git a/drivers/misc/isl29003.c b/drivers/misc/isl29003.c index 5d0d0c3bad85..c12406f610d5 100644 --- a/drivers/misc/isl29003.c +++ b/drivers/misc/isl29003.c @@ -3,7 +3,7 @@ * isl29003.c - Linux kernel module for * Intersil ISL29003 ambient light sensor * - * See file:Documentation/misc-devices/isl29003 + * See file:Documentation/misc-devices/isl29003.rst * * Copyright (c) 2009 Daniel Mack * diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 5d5cc6111081..efa2ad6635dd 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -341,7 +341,7 @@ config HP_ACCEL Support for a led indicating disk protection will be provided as hp::hddprotect. For more information on the feature, refer to - Documentation/misc-devices/lis3lv02d. + Documentation/misc-devices/lis3lv02d.rst. To compile this driver as a module, choose M here: the module will be called hp_accel. -- cgit v1.2.3