From 97c22438963a7484c05c59ab6654e30f0a3e9288 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 10 May 2020 21:12:32 +0200 Subject: net: phy: Add support for polling cable test Some PHYs are not capable of generating interrupts when a cable test finished. They do however support interrupts for normal operations, like link up/down. As such, the PHY state machine would normally not poll the PHY. Add support for indicating the PHY state machine must poll the PHY when performing a cable test. Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski --- drivers/net/phy/phy.c | 2 ++ include/linux/phy.h | 5 +++++ 2 files changed, 7 insertions(+) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 0f4b27215429..9fa61019533f 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -523,6 +523,8 @@ int phy_start_cable_test(struct phy_device *phydev, phydev->state = PHY_CABLETEST; + if (phy_polling_mode(phydev)) + phy_trigger_machine(phydev); out: mutex_unlock(&phydev->lock); diff --git a/include/linux/phy.h b/include/linux/phy.h index 632403fc34f4..f58eee735a45 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -79,6 +79,7 @@ extern const int phy_10gbit_features_array[1]; #define PHY_IS_INTERNAL 0x00000001 #define PHY_RST_AFTER_CLK_EN 0x00000002 +#define PHY_POLL_CABLE_TEST 0x00000004 #define MDIO_DEVICE_IS_PHY 0x80000000 /* Interface Mode definitions */ @@ -1061,6 +1062,10 @@ static inline bool phy_interrupt_is_valid(struct phy_device *phydev) */ static inline bool phy_polling_mode(struct phy_device *phydev) { + if (phydev->state == PHY_CABLETEST) + if (phydev->drv->flags & PHY_POLL_CABLE_TEST) + return true; + return phydev->irq == PHY_POLL; } -- cgit v1.2.3