From 962d8cdc3133435aed2928637f73e272128a326c Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Thu, 3 Mar 2016 10:15:55 +0100 Subject: net: fec: Rename "phy-reset-active-low" property is actually "active high". Thanks for Troy Kisky for pointing that out. Since the patch is in linux-next, this patch is incremental and doesn't replace the original patch. Signed-off-by: Bernhard Walle Acked-by: Fugang Duan Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/fsl-fec.txt | 2 +- drivers/net/ethernet/freescale/fec_main.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index a4799fff0d1f..b037a9d78d93 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -12,7 +12,7 @@ Optional properties: only if property "phy-reset-gpios" is available. Missing the property will have the duration be 1 millisecond. Numbers greater than 1000 are invalid and 1 millisecond will be used instead. -- phy-reset-active-low : If present then the reset sequence using the GPIO +- phy-reset-active-high : If present then the reset sequence using the GPIO specified in the "phy-reset-gpios" property is reversed (H=reset state, L=operation state). - phy-supply : regulator that powers the Ethernet PHY. diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index bad0ba29a94a..37c081583084 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -3191,7 +3191,7 @@ static int fec_enet_init(struct net_device *ndev) static void fec_reset_phy(struct platform_device *pdev) { int err, phy_reset; - bool active_low = false; + bool active_high = false; int msec = 1; struct device_node *np = pdev->dev.of_node; @@ -3207,17 +3207,17 @@ static void fec_reset_phy(struct platform_device *pdev) if (!gpio_is_valid(phy_reset)) return; - active_low = of_property_read_bool(np, "phy-reset-active-low"); + active_high = of_property_read_bool(np, "phy-reset-active-high"); err = devm_gpio_request_one(&pdev->dev, phy_reset, - active_low ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, + active_high ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, "phy-reset"); if (err) { dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err); return; } msleep(msec); - gpio_set_value_cansleep(phy_reset, !active_low); + gpio_set_value_cansleep(phy_reset, !active_high); } #else /* CONFIG_OF */ static void fec_reset_phy(struct platform_device *pdev) -- cgit v1.2.3