From 4eda9b766b042ea38d84df91581b03f6145a2ab0 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 10 May 2018 16:37:26 +0200 Subject: ARM: dts: socfpga: Fix NAND controller clock supply The Denali NAND x-clock should be supplied by nand_x_clk, not by nand_clk. Fix this, otherwise the Denali driver gets incorrect clock frequency information and incorrectly configures the NAND timing. Cc: stable@vger.kernel.org Signed-off-by: Marek Vasut Fixes: d837a80d19 ("ARM: dts: socfpga: add nand controller nodes") Cc: Steffen Trumtrar Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 486d4e7433ed..8fbddc2a5c33 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -754,7 +754,7 @@ reg-names = "nand_data", "denali_reg"; interrupts = <0x0 0x90 0x4>; dma-mask = <0xffffffff>; - clocks = <&nand_clk>; + clocks = <&nand_x_clk>; status = "disabled"; }; -- cgit v1.2.3 From d9a695f3c8098ac9684689774a151cff30d8aa25 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 10 May 2018 14:52:23 +0200 Subject: ARM: dts: socfpga: Fix NAND controller node compatible The compatible string for the Denali NAND controller is incorrect, fix it by replacing it with one matching the DT bindings and the driver. Cc: stable@vger.kernel.org Signed-off-by: Marek Vasut Fixes: d837a80d19 ("ARM: dts: socfpga: add nand controller nodes") Cc: Steffen Trumtrar Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 8fbddc2a5c33..b38f8c240558 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -748,7 +748,7 @@ nand0: nand@ff900000 { #address-cells = <0x1>; #size-cells = <0x1>; - compatible = "denali,denali-nand-dt"; + compatible = "altr,socfpga-denali-nand"; reg = <0xff900000 0x100000>, <0xffb80000 0x10000>; reg-names = "nand_data", "denali_reg"; -- cgit v1.2.3 From 3877ef7a1ccecaae378c497e1dcddbc2dccb664c Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Mon, 14 May 2018 10:15:19 -0500 Subject: ARM: dts: socfpga: Fix NAND controller node compatible for Arria10 The NAND compatible "denali,denal-nand-dt" property has never been used and is obsolete. Remove it. Cc: stable@vger.kernel.org Fixes: f549af06e9b6("ARM: dts: socfpga: Add NAND device tree for Arria10") Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga_arria10.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index bead79e4b2aa..d8b1aa309f76 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -633,7 +633,7 @@ nand: nand@ffb90000 { #address-cells = <1>; #size-cells = <1>; - compatible = "denali,denali-nand-dt", "altr,socfpga-denali-nand"; + compatible = "altr,socfpga-denali-nand"; reg = <0xffb90000 0x72000>, <0xffb80000 0x10000>; reg-names = "nand_data", "denali_reg"; -- cgit v1.2.3 From 2f872ddcdb1e8e2186162616cea4581b8403849d Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Tue, 22 May 2018 11:40:28 +0200 Subject: arm64: dts: marvell: fix CP110 ICU node size ICU size in CP110 is not 0x10 but at least 0x440 bytes long (from the specification). Fixes: 6ef84a827c37 ("arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Reviewed-by: Thomas Petazzoni Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index ed2f1237ea1e..8259b32f0ced 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -149,7 +149,7 @@ CP110_LABEL(icu): interrupt-controller@1e0000 { compatible = "marvell,cp110-icu"; - reg = <0x1e0000 0x10>; + reg = <0x1e0000 0x440>; #interrupt-cells = <3>; interrupt-controller; msi-parent = <&gicp>; -- cgit v1.2.3 From ac62cc9d9cd6fa4c79e171c13dc8d58c3862b678 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 25 May 2018 16:01:47 +0530 Subject: arm: dts: armada: Fix "#cooling-cells" property's name It should be "#cooling-cells" instead of "cooling-cells". Fix it. Signed-off-by: Viresh Kumar Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-synology-ds116.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts index 6782ce481ac9..d8769956cbfc 100644 --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts @@ -139,7 +139,7 @@ 3700 5 3900 6 4000 7>; - cooling-cells = <2>; + #cooling-cells = <2>; }; gpio-leds { -- cgit v1.2.3 From 45615a9baf4661f953887988eeb4de69fd6cd96e Mon Sep 17 00:00:00 2001 From: Xiaotong Lu Date: Fri, 1 Jun 2018 11:36:22 -0700 Subject: Input: add Spreadtrum vibrator driver This patch adds the Spreadtrum vibrator driver, which embedded in the Spreadtrum SC27xx series PMICs. Signed-off-by: Xiaotong Lu Signed-off-by: Baolin Wang Signed-off-by: Dmitry Torokhov --- .../bindings/input/sprd,sc27xx-vibra.txt | 23 +++ drivers/input/misc/Kconfig | 10 ++ drivers/input/misc/Makefile | 1 + drivers/input/misc/sc27xx-vibra.c | 154 +++++++++++++++++++++ 4 files changed, 188 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt create mode 100644 drivers/input/misc/sc27xx-vibra.c diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt new file mode 100644 index 000000000000..f2ec0d4f2dff --- /dev/null +++ b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt @@ -0,0 +1,23 @@ +Spreadtrum SC27xx PMIC Vibrator + +Required properties: +- compatible: should be "sprd,sc2731-vibrator". +- reg: address of vibrator control register. + +Example : + + sc2731_pmic: pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + vibrator@eb4 { + compatible = "sprd,sc2731-vibrator"; + reg = <0xeb4>; + }; + }; diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 572b15fa18c2..c761c0c4f2b8 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -841,4 +841,14 @@ config INPUT_RAVE_SP_PWRBUTTON To compile this driver as a module, choose M here: the module will be called rave-sp-pwrbutton. +config INPUT_SC27XX_VIBRA + tristate "Spreadtrum sc27xx vibrator support" + depends on MFD_SC27XX_PMIC || COMPILE_TEST + select INPUT_FF_MEMLESS + help + This option enables support for Spreadtrum sc27xx vibrator driver. + + To compile this driver as a module, choose M here. The module will + be called sc27xx_vibra. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 72cde28649e2..9d0f9d1ff68f 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -66,6 +66,7 @@ obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o obj-$(CONFIG_INPUT_AXP20X_PEK) += axp20x-pek.o obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o obj-$(CONFIG_INPUT_RK805_PWRKEY) += rk805-pwrkey.o +obj-$(CONFIG_INPUT_SC27XX_VIBRA) += sc27xx-vibra.o obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o diff --git a/drivers/input/misc/sc27xx-vibra.c b/drivers/input/misc/sc27xx-vibra.c new file mode 100644 index 000000000000..295251abbdac --- /dev/null +++ b/drivers/input/misc/sc27xx-vibra.c @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Spreadtrum Communications Inc. + */ + +#include +#include +#include +#include +#include +#include + +#define CUR_DRV_CAL_SEL GENMASK(13, 12) +#define SLP_LDOVIBR_PD_EN BIT(9) +#define LDO_VIBR_PD BIT(8) + +struct vibra_info { + struct input_dev *input_dev; + struct work_struct play_work; + struct regmap *regmap; + u32 base; + u32 strength; + bool enabled; +}; + +static void sc27xx_vibra_set(struct vibra_info *info, bool on) +{ + if (on) { + regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD, 0); + regmap_update_bits(info->regmap, info->base, + SLP_LDOVIBR_PD_EN, 0); + info->enabled = true; + } else { + regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD, + LDO_VIBR_PD); + regmap_update_bits(info->regmap, info->base, + SLP_LDOVIBR_PD_EN, SLP_LDOVIBR_PD_EN); + info->enabled = false; + } +} + +static int sc27xx_vibra_hw_init(struct vibra_info *info) +{ + return regmap_update_bits(info->regmap, info->base, CUR_DRV_CAL_SEL, 0); +} + +static void sc27xx_vibra_play_work(struct work_struct *work) +{ + struct vibra_info *info = container_of(work, struct vibra_info, + play_work); + + if (info->strength && !info->enabled) + sc27xx_vibra_set(info, true); + else if (info->strength == 0 && info->enabled) + sc27xx_vibra_set(info, false); +} + +static int sc27xx_vibra_play(struct input_dev *input, void *data, + struct ff_effect *effect) +{ + struct vibra_info *info = input_get_drvdata(input); + + info->strength = effect->u.rumble.weak_magnitude; + schedule_work(&info->play_work); + + return 0; +} + +static void sc27xx_vibra_close(struct input_dev *input) +{ + struct vibra_info *info = input_get_drvdata(input); + + cancel_work_sync(&info->play_work); + if (info->enabled) + sc27xx_vibra_set(info, false); +} + +static int sc27xx_vibra_probe(struct platform_device *pdev) +{ + struct vibra_info *info; + int error; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!info->regmap) { + dev_err(&pdev->dev, "failed to get vibrator regmap.\n"); + return -ENODEV; + } + + error = device_property_read_u32(&pdev->dev, "reg", &info->base); + if (error) { + dev_err(&pdev->dev, "failed to get vibrator base address.\n"); + return error; + } + + info->input_dev = devm_input_allocate_device(&pdev->dev); + if (!info->input_dev) { + dev_err(&pdev->dev, "failed to allocate input device.\n"); + return -ENOMEM; + } + + info->input_dev->name = "sc27xx:vibrator"; + info->input_dev->id.version = 0; + info->input_dev->close = sc27xx_vibra_close; + + input_set_drvdata(info->input_dev, info); + input_set_capability(info->input_dev, EV_FF, FF_RUMBLE); + INIT_WORK(&info->play_work, sc27xx_vibra_play_work); + info->enabled = false; + + error = sc27xx_vibra_hw_init(info); + if (error) { + dev_err(&pdev->dev, "failed to initialize the vibrator.\n"); + return error; + } + + error = input_ff_create_memless(info->input_dev, NULL, + sc27xx_vibra_play); + if (error) { + dev_err(&pdev->dev, "failed to register vibrator to FF.\n"); + return error; + } + + error = input_register_device(info->input_dev); + if (error) { + dev_err(&pdev->dev, "failed to register input device.\n"); + return error; + } + + return 0; +} + +static const struct of_device_id sc27xx_vibra_of_match[] = { + { .compatible = "sprd,sc2731-vibrator", }, + {} +}; +MODULE_DEVICE_TABLE(of, sc27xx_vibra_of_match); + +static struct platform_driver sc27xx_vibra_driver = { + .driver = { + .name = "sc27xx-vibrator", + .of_match_table = sc27xx_vibra_of_match, + }, + .probe = sc27xx_vibra_probe, +}; + +module_platform_driver(sc27xx_vibra_driver); + +MODULE_DESCRIPTION("Spreadtrum SC27xx Vibrator Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Xiaotong Lu "); -- cgit v1.2.3 From 8f6a652a8c1379023775709e3db6c6f7c1bdb2ab Mon Sep 17 00:00:00 2001 From: Roman Kiryanov Date: Thu, 31 May 2018 17:03:33 -0700 Subject: Input: goldfish_events - fix checkpatch warnings Address issues pointed by checkpatch.pl Signed-off-by: Roman Kiryanov Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/goldfish_events.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/input/keyboard/goldfish_events.c b/drivers/input/keyboard/goldfish_events.c index f6e643b589b6..e8dae6195b30 100644 --- a/drivers/input/keyboard/goldfish_events.c +++ b/drivers/input/keyboard/goldfish_events.c @@ -45,7 +45,7 @@ struct event_dev { static irqreturn_t events_interrupt(int irq, void *dev_id) { struct event_dev *edev = dev_id; - unsigned type, code, value; + unsigned int type, code, value; type = __raw_readl(edev->addr + REG_READ); code = __raw_readl(edev->addr + REG_READ); @@ -57,7 +57,7 @@ static irqreturn_t events_interrupt(int irq, void *dev_id) } static void events_import_bits(struct event_dev *edev, - unsigned long bits[], unsigned type, size_t count) + unsigned long bits[], unsigned int type, size_t count) { void __iomem *addr = edev->addr; int i, j; @@ -99,6 +99,7 @@ static void events_import_abs_params(struct event_dev *edev) for (j = 0; j < ARRAY_SIZE(val); j++) { int offset = (i * ARRAY_SIZE(val) + j) * sizeof(u32); + val[j] = __raw_readl(edev->addr + REG_DATA + offset); } @@ -112,7 +113,7 @@ static int events_probe(struct platform_device *pdev) struct input_dev *input_dev; struct event_dev *edev; struct resource *res; - unsigned keymapnamelen; + unsigned int keymapnamelen; void __iomem *addr; int irq; int i; @@ -150,7 +151,7 @@ static int events_probe(struct platform_device *pdev) for (i = 0; i < keymapnamelen; i++) edev->name[i] = __raw_readb(edev->addr + REG_DATA + i); - pr_debug("events_probe() keymap=%s\n", edev->name); + pr_debug("%s: keymap=%s\n", __func__, edev->name); input_dev->name = edev->name; input_dev->id.bustype = BUS_HOST; -- cgit v1.2.3 From fc573af632b44f355f8fa15ab505f5593368078d Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 5 Jun 2018 09:34:22 -0700 Subject: Input: silead - add MSSL0002 ACPI HID The Silead touchscreen on the Chuwi Vi8 tablet uses MSSL0002 as ACPI HID, rather then the usual MSSL1680 id. Signed-off-by: Hans de Goede Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/silead.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index ff7043f74a3d..d196ac3d8b8c 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -603,6 +603,7 @@ static const struct acpi_device_id silead_ts_acpi_match[] = { { "GSL3692", 0 }, { "MSSL1680", 0 }, { "MSSL0001", 0 }, + { "MSSL0002", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, silead_ts_acpi_match); -- cgit v1.2.3 From 24d28e4f1271cb2f91613dada8f2acccd00eff56 Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Tue, 5 Jun 2018 10:17:51 -0700 Subject: Input: synaptics-rmi4 - convert irq distribution to irq_domain Convert the RMI driver to use the standard mechanism for distributing IRQs to the various functions. Tested on: * S7300 (F11, F34, F54) * S7817 (F12, F34, F54) Signed-off-by: Nick Dyer Acked-by: Christopher Heiny Signed-off-by: Dmitry Torokhov --- drivers/input/rmi4/Kconfig | 1 + drivers/input/rmi4/rmi_bus.c | 50 ++++++++++++++++++++++++++++++++++++++- drivers/input/rmi4/rmi_bus.h | 10 +++++++- drivers/input/rmi4/rmi_driver.c | 52 ++++++++++++++++------------------------- drivers/input/rmi4/rmi_f01.c | 10 ++++---- drivers/input/rmi4/rmi_f03.c | 9 +++---- drivers/input/rmi4/rmi_f11.c | 42 +++++++++++++-------------------- drivers/input/rmi4/rmi_f12.c | 8 +++---- drivers/input/rmi4/rmi_f30.c | 9 +++---- drivers/input/rmi4/rmi_f34.c | 5 ++-- drivers/input/rmi4/rmi_f54.c | 6 ----- include/linux/rmi.h | 2 ++ 12 files changed, 119 insertions(+), 85 deletions(-) diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig index 7172b88cd064..fad2eae4a118 100644 --- a/drivers/input/rmi4/Kconfig +++ b/drivers/input/rmi4/Kconfig @@ -3,6 +3,7 @@ # config RMI4_CORE tristate "Synaptics RMI4 bus support" + select IRQ_DOMAIN help Say Y here if you want to support the Synaptics RMI4 bus. This is required for all RMI4 device support. diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c index c5fa53adba8d..bd0d5ff01b08 100644 --- a/drivers/input/rmi4/rmi_bus.c +++ b/drivers/input/rmi4/rmi_bus.c @@ -9,6 +9,8 @@ #include #include +#include +#include #include #include #include @@ -167,6 +169,39 @@ static inline void rmi_function_of_probe(struct rmi_function *fn) {} #endif +static struct irq_chip rmi_irq_chip = { + .name = "rmi4", +}; + +static int rmi_create_function_irq(struct rmi_function *fn, + struct rmi_function_handler *handler) +{ + struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev); + int i, error; + + for (i = 0; i < fn->num_of_irqs; i++) { + set_bit(fn->irq_pos + i, fn->irq_mask); + + fn->irq[i] = irq_create_mapping(drvdata->irqdomain, + fn->irq_pos + i); + + irq_set_chip_data(fn->irq[i], fn); + irq_set_chip_and_handler(fn->irq[i], &rmi_irq_chip, + handle_simple_irq); + irq_set_nested_thread(fn->irq[i], 1); + + error = devm_request_threaded_irq(&fn->dev, fn->irq[i], NULL, + handler->attention, IRQF_ONESHOT, + dev_name(&fn->dev), fn); + if (error) { + dev_err(&fn->dev, "Error %d registering IRQ\n", error); + return error; + } + } + + return 0; +} + static int rmi_function_probe(struct device *dev) { struct rmi_function *fn = to_rmi_function(dev); @@ -178,7 +213,14 @@ static int rmi_function_probe(struct device *dev) if (handler->probe) { error = handler->probe(fn); - return error; + if (error) + return error; + } + + if (fn->num_of_irqs && handler->attention) { + error = rmi_create_function_irq(fn, handler); + if (error) + return error; } return 0; @@ -230,12 +272,18 @@ err_put_device: void rmi_unregister_function(struct rmi_function *fn) { + int i; + rmi_dbg(RMI_DEBUG_CORE, &fn->dev, "Unregistering F%02X.\n", fn->fd.function_number); device_del(&fn->dev); of_node_put(fn->dev.of_node); put_device(&fn->dev); + + for (i = 0; i < fn->num_of_irqs; i++) + irq_dispose_mapping(fn->irq[i]); + } /** diff --git a/drivers/input/rmi4/rmi_bus.h b/drivers/input/rmi4/rmi_bus.h index b7625a9ac66a..96383eab41ba 100644 --- a/drivers/input/rmi4/rmi_bus.h +++ b/drivers/input/rmi4/rmi_bus.h @@ -14,6 +14,12 @@ struct rmi_device; +/* + * The interrupt source count in the function descriptor can represent up to + * 6 interrupt sources in the normal manner. + */ +#define RMI_FN_MAX_IRQS 6 + /** * struct rmi_function - represents the implementation of an RMI4 * function for a particular device (basically, a driver for that RMI4 function) @@ -26,6 +32,7 @@ struct rmi_device; * @irq_pos: The position in the irq bitfield this function holds * @irq_mask: For convenience, can be used to mask IRQ bits off during ATTN * interrupt handling. + * @irqs: assigned virq numbers (up to num_of_irqs) * * @node: entry in device's list of functions */ @@ -36,6 +43,7 @@ struct rmi_function { struct list_head node; unsigned int num_of_irqs; + int irq[RMI_FN_MAX_IRQS]; unsigned int irq_pos; unsigned long irq_mask[]; }; @@ -76,7 +84,7 @@ struct rmi_function_handler { void (*remove)(struct rmi_function *fn); int (*config)(struct rmi_function *fn); int (*reset)(struct rmi_function *fn); - int (*attention)(struct rmi_function *fn, unsigned long *irq_bits); + irqreturn_t (*attention)(int irq, void *ctx); int (*suspend)(struct rmi_function *fn); int (*resume)(struct rmi_function *fn); }; diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c index f5954981e9ee..2fb0ae0bdfe3 100644 --- a/drivers/input/rmi4/rmi_driver.c +++ b/drivers/input/rmi4/rmi_driver.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include "rmi_bus.h" @@ -127,28 +128,11 @@ static int rmi_driver_process_config_requests(struct rmi_device *rmi_dev) return 0; } -static void process_one_interrupt(struct rmi_driver_data *data, - struct rmi_function *fn) -{ - struct rmi_function_handler *fh; - - if (!fn || !fn->dev.driver) - return; - - fh = to_rmi_function_handler(fn->dev.driver); - if (fh->attention) { - bitmap_and(data->fn_irq_bits, data->irq_status, fn->irq_mask, - data->irq_count); - if (!bitmap_empty(data->fn_irq_bits, data->irq_count)) - fh->attention(fn, data->fn_irq_bits); - } -} - static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev) { struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); struct device *dev = &rmi_dev->dev; - struct rmi_function *entry; + int i; int error; if (!data) @@ -173,16 +157,8 @@ static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev) */ mutex_unlock(&data->irq_mutex); - /* - * It would be nice to be able to use irq_chip to handle these - * nested IRQs. Unfortunately, most of the current customers for - * this driver are using older kernels (3.0.x) that don't support - * the features required for that. Once they've shifted to more - * recent kernels (say, 3.3 and higher), this should be switched to - * use irq_chip. - */ - list_for_each_entry(entry, &data->function_list, node) - process_one_interrupt(data, entry); + for_each_set_bit(i, data->irq_status, data->irq_count) + handle_nested_irq(irq_find_mapping(data->irqdomain, i)); if (data->input) input_sync(data->input); @@ -1000,9 +976,13 @@ EXPORT_SYMBOL_GPL(rmi_driver_resume); static int rmi_driver_remove(struct device *dev) { struct rmi_device *rmi_dev = to_rmi_device(dev); + struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); rmi_disable_irq(rmi_dev, false); + irq_domain_remove(data->irqdomain); + data->irqdomain = NULL; + rmi_f34_remove_sysfs(rmi_dev); rmi_free_function_list(rmi_dev); @@ -1034,7 +1014,8 @@ int rmi_probe_interrupts(struct rmi_driver_data *data) { struct rmi_device *rmi_dev = data->rmi_dev; struct device *dev = &rmi_dev->dev; - int irq_count; + struct fwnode_handle *fwnode = rmi_dev->xport->dev->fwnode; + int irq_count = 0; size_t size; int retval; @@ -1045,7 +1026,6 @@ int rmi_probe_interrupts(struct rmi_driver_data *data) * being accessed. */ rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Counting IRQs.\n", __func__); - irq_count = 0; data->bootloader_mode = false; retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_count_irqs); @@ -1057,6 +1037,15 @@ int rmi_probe_interrupts(struct rmi_driver_data *data) if (data->bootloader_mode) dev_warn(dev, "Device in bootloader mode.\n"); + /* Allocate and register a linear revmap irq_domain */ + data->irqdomain = irq_domain_create_linear(fwnode, irq_count, + &irq_domain_simple_ops, + data); + if (!data->irqdomain) { + dev_err(&rmi_dev->dev, "Failed to create IRQ domain\n"); + return PTR_ERR(data->irqdomain); + } + data->irq_count = irq_count; data->num_of_irq_regs = (data->irq_count + 7) / 8; @@ -1079,10 +1068,9 @@ int rmi_init_functions(struct rmi_driver_data *data) { struct rmi_device *rmi_dev = data->rmi_dev; struct device *dev = &rmi_dev->dev; - int irq_count; + int irq_count = 0; int retval; - irq_count = 0; rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Creating functions.\n", __func__); retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function); if (retval < 0) { diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c index 8a07ae147df6..4edaa14fe878 100644 --- a/drivers/input/rmi4/rmi_f01.c +++ b/drivers/input/rmi4/rmi_f01.c @@ -681,9 +681,9 @@ static int rmi_f01_resume(struct rmi_function *fn) return 0; } -static int rmi_f01_attention(struct rmi_function *fn, - unsigned long *irq_bits) +static irqreturn_t rmi_f01_attention(int irq, void *ctx) { + struct rmi_function *fn = ctx; struct rmi_device *rmi_dev = fn->rmi_dev; int error; u8 device_status; @@ -692,7 +692,7 @@ static int rmi_f01_attention(struct rmi_function *fn, if (error) { dev_err(&fn->dev, "Failed to read device status: %d.\n", error); - return error; + return IRQ_RETVAL(error); } if (RMI_F01_STATUS_BOOTLOADER(device_status)) @@ -704,11 +704,11 @@ static int rmi_f01_attention(struct rmi_function *fn, error = rmi_dev->driver->reset_handler(rmi_dev); if (error) { dev_err(&fn->dev, "Device reset failed: %d\n", error); - return error; + return IRQ_RETVAL(error); } } - return 0; + return IRQ_HANDLED; } struct rmi_function_handler rmi_f01_handler = { diff --git a/drivers/input/rmi4/rmi_f03.c b/drivers/input/rmi4/rmi_f03.c index 88822196d6b7..aaa1edc95522 100644 --- a/drivers/input/rmi4/rmi_f03.c +++ b/drivers/input/rmi4/rmi_f03.c @@ -244,8 +244,9 @@ static int rmi_f03_config(struct rmi_function *fn) return 0; } -static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits) +static irqreturn_t rmi_f03_attention(int irq, void *ctx) { + struct rmi_function *fn = ctx; struct rmi_device *rmi_dev = fn->rmi_dev; struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); struct f03_data *f03 = dev_get_drvdata(&fn->dev); @@ -262,7 +263,7 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits) /* First grab the data passed by the transport device */ if (drvdata->attn_data.size < ob_len) { dev_warn(&fn->dev, "F03 interrupted, but data is missing!\n"); - return 0; + return IRQ_HANDLED; } memcpy(obs, drvdata->attn_data.data, ob_len); @@ -277,7 +278,7 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits) "%s: Failed to read F03 output buffers: %d\n", __func__, error); serio_interrupt(f03->serio, 0, SERIO_TIMEOUT); - return error; + return IRQ_RETVAL(error); } } @@ -303,7 +304,7 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits) serio_interrupt(f03->serio, ob_data, serio_flags); } - return 0; + return IRQ_HANDLED; } static void rmi_f03_remove(struct rmi_function *fn) diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c index bc5e37f30ac1..5f2e1ef5accc 100644 --- a/drivers/input/rmi4/rmi_f11.c +++ b/drivers/input/rmi4/rmi_f11.c @@ -570,9 +570,7 @@ static inline u8 rmi_f11_parse_finger_state(const u8 *f_state, u8 n_finger) } static void rmi_f11_finger_handler(struct f11_data *f11, - struct rmi_2d_sensor *sensor, - unsigned long *irq_bits, int num_irq_regs, - int size) + struct rmi_2d_sensor *sensor, int size) { const u8 *f_state = f11->data.f_state; u8 finger_state; @@ -581,12 +579,7 @@ static void rmi_f11_finger_handler(struct f11_data *f11, int rel_fingers; int abs_size = sensor->nbr_fingers * RMI_F11_ABS_BYTES; - int abs_bits = bitmap_and(f11->result_bits, irq_bits, f11->abs_mask, - num_irq_regs * 8); - int rel_bits = bitmap_and(f11->result_bits, irq_bits, f11->rel_mask, - num_irq_regs * 8); - - if (abs_bits) { + if (sensor->report_abs) { if (abs_size > size) abs_fingers = size / RMI_F11_ABS_BYTES; else @@ -604,19 +597,7 @@ static void rmi_f11_finger_handler(struct f11_data *f11, rmi_f11_abs_pos_process(f11, sensor, &sensor->objs[i], finger_state, i); } - } - if (rel_bits) { - if ((abs_size + sensor->nbr_fingers * RMI_F11_REL_BYTES) > size) - rel_fingers = (size - abs_size) / RMI_F11_REL_BYTES; - else - rel_fingers = sensor->nbr_fingers; - - for (i = 0; i < rel_fingers; i++) - rmi_f11_rel_pos_report(f11, i); - } - - if (abs_bits) { /* * the absolute part is made in 2 parts to allow the kernel * tracking to take place. @@ -638,7 +619,16 @@ static void rmi_f11_finger_handler(struct f11_data *f11, } input_mt_sync_frame(sensor->input); + } else if (sensor->report_rel) { + if ((abs_size + sensor->nbr_fingers * RMI_F11_REL_BYTES) > size) + rel_fingers = (size - abs_size) / RMI_F11_REL_BYTES; + else + rel_fingers = sensor->nbr_fingers; + + for (i = 0; i < rel_fingers; i++) + rmi_f11_rel_pos_report(f11, i); } + } static int f11_2d_construct_data(struct f11_data *f11) @@ -1275,8 +1265,9 @@ static int rmi_f11_config(struct rmi_function *fn) return 0; } -static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits) +static irqreturn_t rmi_f11_attention(int irq, void *ctx) { + struct rmi_function *fn = ctx; struct rmi_device *rmi_dev = fn->rmi_dev; struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); struct f11_data *f11 = dev_get_drvdata(&fn->dev); @@ -1302,13 +1293,12 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits) data_base_addr, f11->sensor.data_pkt, f11->sensor.pkt_size); if (error < 0) - return error; + return IRQ_RETVAL(error); } - rmi_f11_finger_handler(f11, &f11->sensor, irq_bits, - drvdata->num_of_irq_regs, valid_bytes); + rmi_f11_finger_handler(f11, &f11->sensor, valid_bytes); - return 0; + return IRQ_HANDLED; } static int rmi_f11_resume(struct rmi_function *fn) diff --git a/drivers/input/rmi4/rmi_f12.c b/drivers/input/rmi4/rmi_f12.c index 8b0db086d68a..e226def74d82 100644 --- a/drivers/input/rmi4/rmi_f12.c +++ b/drivers/input/rmi4/rmi_f12.c @@ -197,10 +197,10 @@ static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1, int size) rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i); } -static int rmi_f12_attention(struct rmi_function *fn, - unsigned long *irq_nr_regs) +static irqreturn_t rmi_f12_attention(int irq, void *ctx) { int retval; + struct rmi_function *fn = ctx; struct rmi_device *rmi_dev = fn->rmi_dev; struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); struct f12_data *f12 = dev_get_drvdata(&fn->dev); @@ -222,7 +222,7 @@ static int rmi_f12_attention(struct rmi_function *fn, if (retval < 0) { dev_err(&fn->dev, "Failed to read object data. Code: %d.\n", retval); - return retval; + return IRQ_RETVAL(retval); } } @@ -232,7 +232,7 @@ static int rmi_f12_attention(struct rmi_function *fn, input_mt_sync_frame(sensor->input); - return 0; + return IRQ_HANDLED; } static int rmi_f12_write_control_regs(struct rmi_function *fn) diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c index 82e0f0d43d55..5e3ed5ac0c3e 100644 --- a/drivers/input/rmi4/rmi_f30.c +++ b/drivers/input/rmi4/rmi_f30.c @@ -122,8 +122,9 @@ static void rmi_f30_report_button(struct rmi_function *fn, } } -static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits) +static irqreturn_t rmi_f30_attention(int irq, void *ctx) { + struct rmi_function *fn = ctx; struct f30_data *f30 = dev_get_drvdata(&fn->dev); struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev); int error; @@ -134,7 +135,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits) if (drvdata->attn_data.size < f30->register_count) { dev_warn(&fn->dev, "F30 interrupted, but data is missing\n"); - return 0; + return IRQ_HANDLED; } memcpy(f30->data_regs, drvdata->attn_data.data, f30->register_count); @@ -147,7 +148,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits) dev_err(&fn->dev, "%s: Failed to read F30 data registers: %d\n", __func__, error); - return error; + return IRQ_RETVAL(error); } } @@ -159,7 +160,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits) rmi_f03_commit_buttons(f30->f03); } - return 0; + return IRQ_HANDLED; } static int rmi_f30_config(struct rmi_function *fn) diff --git a/drivers/input/rmi4/rmi_f34.c b/drivers/input/rmi4/rmi_f34.c index f1f5ac539d5d..87a7d4ba382d 100644 --- a/drivers/input/rmi4/rmi_f34.c +++ b/drivers/input/rmi4/rmi_f34.c @@ -100,8 +100,9 @@ static int rmi_f34_command(struct f34_data *f34, u8 command, return 0; } -static int rmi_f34_attention(struct rmi_function *fn, unsigned long *irq_bits) +static irqreturn_t rmi_f34_attention(int irq, void *ctx) { + struct rmi_function *fn = ctx; struct f34_data *f34 = dev_get_drvdata(&fn->dev); int ret; u8 status; @@ -126,7 +127,7 @@ static int rmi_f34_attention(struct rmi_function *fn, unsigned long *irq_bits) complete(&f34->v7.cmd_done); } - return 0; + return IRQ_HANDLED; } static int rmi_f34_write_blocks(struct f34_data *f34, const void *data, diff --git a/drivers/input/rmi4/rmi_f54.c b/drivers/input/rmi4/rmi_f54.c index 5343f2c08f15..98a935efec8e 100644 --- a/drivers/input/rmi4/rmi_f54.c +++ b/drivers/input/rmi4/rmi_f54.c @@ -610,11 +610,6 @@ error: mutex_unlock(&f54->data_mutex); } -static int rmi_f54_attention(struct rmi_function *fn, unsigned long *irqbits) -{ - return 0; -} - static int rmi_f54_config(struct rmi_function *fn) { struct rmi_driver *drv = fn->rmi_dev->driver; @@ -756,6 +751,5 @@ struct rmi_function_handler rmi_f54_handler = { .func = 0x54, .probe = rmi_f54_probe, .config = rmi_f54_config, - .attention = rmi_f54_attention, .remove = rmi_f54_remove, }; diff --git a/include/linux/rmi.h b/include/linux/rmi.h index 64125443f8a6..5ef5c7c412a7 100644 --- a/include/linux/rmi.h +++ b/include/linux/rmi.h @@ -354,6 +354,8 @@ struct rmi_driver_data { struct mutex irq_mutex; struct input_dev *input; + struct irq_domain *irqdomain; + u8 pdt_props; u8 num_rx_electrodes; -- cgit v1.2.3 From 977d5ba4507dfe5b1346597ee57750262d8d2b19 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 5 Jun 2018 17:05:15 +0200 Subject: soc: renesas: rcar-sysc: Make PM domain initialization more robust The quirk for R-Car E3 ES1.0 added in commit 086b399965a7ee7e ("soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}") makes the 3DG-A PM domain a subdomain of the 3DG-B PM domain. However, registering 3DG-A with its parent fails silently, as the 3DG-B PM domain hasn't been registered yet, and such failures are never reported. Fix this by: 1. Splitting PM Domain initialization in two steps, so all PM domains are registered before any child-parent links are established, 2. Reporting any failures in establishing child-parent relations. Check for and report pm_genpd_init() failures, too, as that function gained a return value in commit 7eb231c337e00735 ("PM / Domains: Convert pm_genpd_init() to return an error code"). Fixes: 086b399965a7ee7e ("soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}") Signed-off-by: Geert Uytterhoeven Tested-by: Yoshihiro Shimoda Reviewed-by: Ulf Hansson Signed-off-by: Simon Horman --- drivers/soc/renesas/rcar-sysc.c | 35 +++++++++++++++++++++++++++++------ 1 file changed, 29 insertions(+), 6 deletions(-) diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index 95120acc4d80..50d03d8b4f9a 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -194,11 +194,12 @@ static int rcar_sysc_pd_power_on(struct generic_pm_domain *genpd) static bool has_cpg_mstp; -static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd) +static int __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd) { struct generic_pm_domain *genpd = &pd->genpd; const char *name = pd->genpd.name; struct dev_power_governor *gov = &simple_qos_governor; + int error; if (pd->flags & PD_CPU) { /* @@ -251,7 +252,11 @@ static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd) rcar_sysc_power_up(&pd->ch); finalize: - pm_genpd_init(genpd, gov, false); + error = pm_genpd_init(genpd, gov, false); + if (error) + pr_err("Failed to init PM domain %s: %d\n", name, error); + + return error; } static const struct of_device_id rcar_sysc_matches[] __initconst = { @@ -375,6 +380,9 @@ static int __init rcar_sysc_pd_init(void) pr_debug("%pOF: syscier = 0x%08x\n", np, syscier); iowrite32(syscier, base + SYSCIER); + /* + * First, create all PM domains + */ for (i = 0; i < info->num_areas; i++) { const struct rcar_sysc_area *area = &info->areas[i]; struct rcar_sysc_pd *pd; @@ -397,14 +405,29 @@ static int __init rcar_sysc_pd_init(void) pd->ch.isr_bit = area->isr_bit; pd->flags = area->flags; - rcar_sysc_pd_setup(pd); - if (area->parent >= 0) - pm_genpd_add_subdomain(domains->domains[area->parent], - &pd->genpd); + error = rcar_sysc_pd_setup(pd); + if (error) + goto out_put; domains->domains[area->isr_bit] = &pd->genpd; } + /* + * Second, link all PM domains to their parents + */ + for (i = 0; i < info->num_areas; i++) { + const struct rcar_sysc_area *area = &info->areas[i]; + + if (!area->name || area->parent < 0) + continue; + + error = pm_genpd_add_subdomain(domains->domains[area->parent], + domains->domains[area->isr_bit]); + if (error) + pr_warn("Failed to add PM subdomain %s to parent %u\n", + area->name, area->parent); + } + error = of_genpd_add_provider_onecell(np, &domains->onecell_data); out_put: -- cgit v1.2.3 From fd629294759b1e6e5dfc0c9bf892e63553dcc6fa Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 11 Jun 2018 10:09:15 -0700 Subject: Input: synaptics-rmi4 - fix the error return code in rmi_probe_interrupts() The error return code PTR_ERR(data->irqdomain) is always 0 since data->irqdomain is equal to NULL in this error handling case. Fixes: 24d28e4f1271 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain") Signed-off-by: Wei Yongjun Reviewed-by: Lyude Paul Reviewed-by: Nick Desaulniers Signed-off-by: Dmitry Torokhov --- drivers/input/rmi4/rmi_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c index 2fb0ae0bdfe3..cb6d983e8033 100644 --- a/drivers/input/rmi4/rmi_driver.c +++ b/drivers/input/rmi4/rmi_driver.c @@ -1043,7 +1043,7 @@ int rmi_probe_interrupts(struct rmi_driver_data *data) data); if (!data->irqdomain) { dev_err(&rmi_dev->dev, "Failed to create IRQ domain\n"); - return PTR_ERR(data->irqdomain); + return -ENOMEM; } data->irq_count = irq_count; -- cgit v1.2.3 From 645a397d325db6e1bb36588095ae637738b37693 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Tue, 5 Jun 2018 10:34:54 -0700 Subject: Input: synaptics-rmi4 - fix axis-swap behavior The documentation for the touchscreen-swapped-x-y property states that swapping is done after inverting if both are used. RMI4 did it the other way around, leading to inconsistent behavior with regard to other touchscreens. Signed-off-by: Lucas Stach Tested-by: Nick Dyer Signed-off-by: Dmitry Torokhov --- drivers/input/rmi4/rmi_2d_sensor.c | 34 ++++++++++++++++------------------ 1 file changed, 16 insertions(+), 18 deletions(-) diff --git a/drivers/input/rmi4/rmi_2d_sensor.c b/drivers/input/rmi4/rmi_2d_sensor.c index 8bb866c7b985..8eeffa066022 100644 --- a/drivers/input/rmi4/rmi_2d_sensor.c +++ b/drivers/input/rmi4/rmi_2d_sensor.c @@ -32,15 +32,15 @@ void rmi_2d_sensor_abs_process(struct rmi_2d_sensor *sensor, if (obj->type == RMI_2D_OBJECT_NONE) return; - if (axis_align->swap_axes) - swap(obj->x, obj->y); - if (axis_align->flip_x) obj->x = sensor->max_x - obj->x; if (axis_align->flip_y) obj->y = sensor->max_y - obj->y; + if (axis_align->swap_axes) + swap(obj->x, obj->y); + /* * Here checking if X offset or y offset are specified is * redundant. We just add the offsets or clip the values. @@ -120,15 +120,15 @@ void rmi_2d_sensor_rel_report(struct rmi_2d_sensor *sensor, int x, int y) x = min(RMI_2D_REL_POS_MAX, max(RMI_2D_REL_POS_MIN, (int)x)); y = min(RMI_2D_REL_POS_MAX, max(RMI_2D_REL_POS_MIN, (int)y)); - if (axis_align->swap_axes) - swap(x, y); - if (axis_align->flip_x) x = min(RMI_2D_REL_POS_MAX, -x); if (axis_align->flip_y) y = min(RMI_2D_REL_POS_MAX, -y); + if (axis_align->swap_axes) + swap(x, y); + if (x || y) { input_report_rel(sensor->input, REL_X, x); input_report_rel(sensor->input, REL_Y, y); @@ -141,17 +141,10 @@ static void rmi_2d_sensor_set_input_params(struct rmi_2d_sensor *sensor) struct input_dev *input = sensor->input; int res_x; int res_y; + int max_x, max_y; int input_flags = 0; if (sensor->report_abs) { - if (sensor->axis_align.swap_axes) { - swap(sensor->max_x, sensor->max_y); - swap(sensor->axis_align.clip_x_low, - sensor->axis_align.clip_y_low); - swap(sensor->axis_align.clip_x_high, - sensor->axis_align.clip_y_high); - } - sensor->min_x = sensor->axis_align.clip_x_low; if (sensor->axis_align.clip_x_high) sensor->max_x = min(sensor->max_x, @@ -163,14 +156,19 @@ static void rmi_2d_sensor_set_input_params(struct rmi_2d_sensor *sensor) sensor->axis_align.clip_y_high); set_bit(EV_ABS, input->evbit); - input_set_abs_params(input, ABS_MT_POSITION_X, 0, sensor->max_x, - 0, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, 0, sensor->max_y, - 0, 0); + + max_x = sensor->max_x; + max_y = sensor->max_y; + if (sensor->axis_align.swap_axes) + swap(max_x, max_y); + input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_x, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_y, 0, 0); if (sensor->x_mm && sensor->y_mm) { res_x = (sensor->max_x - sensor->min_x) / sensor->x_mm; res_y = (sensor->max_y - sensor->min_y) / sensor->y_mm; + if (sensor->axis_align.swap_axes) + swap(res_x, res_y); input_abs_set_res(input, ABS_X, res_x); input_abs_set_res(input, ABS_Y, res_y); -- cgit v1.2.3 From bf6247a70f2b7569180304041b63b59ab14217bc Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 5 Jun 2018 10:08:44 -0700 Subject: Input: make input_report_slot_state() return boolean Let's make input_report_slot_state() return boolean representing whether the contact is active or not. This will allow writing code like: if (input_mt_report_slot_state(input, obj->mt_tool, obj->type != RMI_2D_OBJECT_NONE) { input_event(sensor->input, EV_ABS, ABS_MT_POSITION_X, obj->x); input_event(sensor->input, EV_ABS, ABS_MT_POSITION_Y, obj->y); ... } instead of: input_mt_report_slot_state(input, obj->mt_tool, obj->type != RMI_2D_OBJECT_NONE); if (obj->type != RMI_2D_OBJECT_NONE) { input_event(sensor->input, EV_ABS, ABS_MT_POSITION_X, obj->x); input_event(sensor->input, EV_ABS, ABS_MT_POSITION_Y, obj->y); ... } Reviewed-by: Henrik Rydberg Acked-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- drivers/input/input-mt.c | 10 +++++++--- include/linux/input/mt.h | 2 +- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c index a1bbec9cda8d..8de52e3c00c0 100644 --- a/drivers/input/input-mt.c +++ b/drivers/input/input-mt.c @@ -131,8 +131,10 @@ EXPORT_SYMBOL(input_mt_destroy_slots); * inactive, or if the tool type is changed, a new tracking id is * assigned to the slot. The tool type is only reported if the * corresponding absbit field is set. + * + * Returns true if contact is active. */ -void input_mt_report_slot_state(struct input_dev *dev, +bool input_mt_report_slot_state(struct input_dev *dev, unsigned int tool_type, bool active) { struct input_mt *mt = dev->mt; @@ -140,14 +142,14 @@ void input_mt_report_slot_state(struct input_dev *dev, int id; if (!mt) - return; + return false; slot = &mt->slots[mt->slot]; slot->frame = mt->frame; if (!active) { input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1); - return; + return false; } id = input_mt_get_value(slot, ABS_MT_TRACKING_ID); @@ -156,6 +158,8 @@ void input_mt_report_slot_state(struct input_dev *dev, input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, id); input_event(dev, EV_ABS, ABS_MT_TOOL_TYPE, tool_type); + + return true; } EXPORT_SYMBOL(input_mt_report_slot_state); diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index d7188de4db96..3f4bf60b0bb5 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -100,7 +100,7 @@ static inline bool input_is_mt_axis(int axis) return axis == ABS_MT_SLOT || input_is_mt_value(axis); } -void input_mt_report_slot_state(struct input_dev *dev, +bool input_mt_report_slot_state(struct input_dev *dev, unsigned int tool_type, bool active); void input_mt_report_finger_count(struct input_dev *dev, int count); -- cgit v1.2.3 From c258e84b180d38f76ab9962cf5bfc10720af1360 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 15 Aug 2017 16:00:42 -0700 Subject: Input: do not assign new tracking ID when changing tool type We allow changing tool type (from MT_TOOL_FINGER to MT_TOOL_PALM) so we should not be forcing new tracking ID for the slot. Acked-by: Benjamin Tissoires Reviewed-by: Peter Hutterer Signed-off-by: Dmitry Torokhov --- drivers/input/input-mt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c index 8de52e3c00c0..4a69716e5461 100644 --- a/drivers/input/input-mt.c +++ b/drivers/input/input-mt.c @@ -153,7 +153,7 @@ bool input_mt_report_slot_state(struct input_dev *dev, } id = input_mt_get_value(slot, ABS_MT_TRACKING_ID); - if (id < 0 || input_mt_get_value(slot, ABS_MT_TOOL_TYPE) != tool_type) + if (id < 0) id = input_mt_new_trkid(mt); input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, id); -- cgit v1.2.3 From 71ab91157e9d849a5a0c5fcd1ce68d236c3ca703 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 11 Jun 2018 08:58:36 -0600 Subject: microblaze: heartbeat: fix missing prom.h include Since commit 96f0e6fcc9ad ("microblaze: remove redundant early_printk support") prom.h was removed and one instance in heartbeat.c remained. Include of.h as it is the actual header needed. Fixes: 96f0e6fcc9ad ("microblaze: remove redundant early_printk support") Reported-by: kbuild test robot Cc: Michal Simek Signed-off-by: Rob Herring Signed-off-by: Michal Simek --- arch/microblaze/kernel/heartbeat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/microblaze/kernel/heartbeat.c b/arch/microblaze/kernel/heartbeat.c index 2022130139d2..87aa942eee8c 100644 --- a/arch/microblaze/kernel/heartbeat.c +++ b/arch/microblaze/kernel/heartbeat.c @@ -11,10 +11,10 @@ #include #include #include +#include #include #include -#include static unsigned int base_addr; -- cgit v1.2.3 From 5cf8da7bc03570bc15ef1b59e584dfb9e0f47e51 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 12 Jun 2018 12:46:17 +0200 Subject: microblaze: Remove architecture heart beat code There is no reason to keep this gpio based code in architecture. Use ledtrig-heartbeat.c instead which is much more flexible then this ancient code. Signed-off-by: Michal Simek Reviewed-by: Linus Walleij --- arch/microblaze/Kconfig.debug | 7 ---- arch/microblaze/include/asm/setup.h | 3 -- arch/microblaze/kernel/Makefile | 2 -- arch/microblaze/kernel/heartbeat.c | 72 ------------------------------------- arch/microblaze/kernel/timer.c | 7 ---- 5 files changed, 91 deletions(-) delete mode 100644 arch/microblaze/kernel/heartbeat.c diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug index 331a3bb66297..93a737c8d1a6 100644 --- a/arch/microblaze/Kconfig.debug +++ b/arch/microblaze/Kconfig.debug @@ -8,11 +8,4 @@ config TRACE_IRQFLAGS_SUPPORT source "lib/Kconfig.debug" -config HEART_BEAT - bool "Heart beat function for kernel" - default n - help - This option turns on/off heart beat kernel functionality. - First GPIO node is taken. - endmenu diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h index d5384f6f36f7..a38e4a56e3c6 100644 --- a/arch/microblaze/include/asm/setup.h +++ b/arch/microblaze/include/asm/setup.h @@ -19,9 +19,6 @@ extern char cmd_line[COMMAND_LINE_SIZE]; extern char *klimit; -void microblaze_heartbeat(void); -void microblaze_setup_heartbeat(void); - # ifdef CONFIG_MMU extern void mmu_reset(void); # endif /* CONFIG_MMU */ diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile index 7e99cf6984a1..3a53378d66d9 100644 --- a/arch/microblaze/kernel/Makefile +++ b/arch/microblaze/kernel/Makefile @@ -8,7 +8,6 @@ ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_timer.o = -pg CFLAGS_REMOVE_intc.o = -pg CFLAGS_REMOVE_early_printk.o = -pg -CFLAGS_REMOVE_heartbeat.o = -pg CFLAGS_REMOVE_ftrace.o = -pg CFLAGS_REMOVE_process.o = -pg endif @@ -22,7 +21,6 @@ obj-y += dma.o exceptions.o \ obj-y += cpu/ -obj-$(CONFIG_HEART_BEAT) += heartbeat.o obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o obj-$(CONFIG_MMU) += misc.o obj-$(CONFIG_STACKTRACE) += stacktrace.o diff --git a/arch/microblaze/kernel/heartbeat.c b/arch/microblaze/kernel/heartbeat.c deleted file mode 100644 index 87aa942eee8c..000000000000 --- a/arch/microblaze/kernel/heartbeat.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * Copyright (C) 2007-2009 Michal Simek - * Copyright (C) 2007-2009 PetaLogix - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include -#include -#include -#include - -#include -#include - -static unsigned int base_addr; - -void microblaze_heartbeat(void) -{ - static unsigned int cnt, period, dist; - - if (base_addr) { - if (cnt == 0 || cnt == dist) - out_be32(base_addr, 1); - else if (cnt == 7 || cnt == dist + 7) - out_be32(base_addr, 0); - - if (++cnt > period) { - cnt = 0; - /* - * The hyperbolic function below modifies the heartbeat - * period length in dependency of the current (5min) - * load. It goes through the points f(0)=126, f(1)=86, - * f(5)=51, f(inf)->30. - */ - period = ((672 << FSHIFT) / (5 * avenrun[0] + - (7 << FSHIFT))) + 30; - dist = period / 4; - } - } -} - -void microblaze_setup_heartbeat(void) -{ - struct device_node *gpio = NULL; - int *prop; - int j; - const char * const gpio_list[] = { - "xlnx,xps-gpio-1.00.a", - NULL - }; - - for (j = 0; gpio_list[j] != NULL; j++) { - gpio = of_find_compatible_node(NULL, NULL, gpio_list[j]); - if (gpio) - break; - } - - if (gpio) { - base_addr = be32_to_cpup(of_get_property(gpio, "reg", NULL)); - base_addr = (unsigned long) ioremap(base_addr, PAGE_SIZE); - pr_notice("Heartbeat GPIO at 0x%x\n", base_addr); - - /* GPIO is configured as output */ - prop = (int *) of_get_property(gpio, "xlnx,is-bidir", NULL); - if (prop) - out_be32(base_addr + 4, 0); - } -} diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index 7de941cbbd94..a6683484b3a1 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -156,9 +156,6 @@ static inline void timer_ack(void) static irqreturn_t timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = &clockevent_xilinx_timer; -#ifdef CONFIG_HEART_BEAT - microblaze_heartbeat(); -#endif timer_ack(); evt->event_handler(evt); return IRQ_HANDLED; @@ -318,10 +315,6 @@ static int __init xilinx_timer_init(struct device_node *timer) return ret; } -#ifdef CONFIG_HEART_BEAT - microblaze_setup_heartbeat(); -#endif - ret = xilinx_clocksource_init(); if (ret) return ret; -- cgit v1.2.3 From 327eaf738ff97d19491362e30497954105d60414 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 12 Jun 2018 23:34:57 -0400 Subject: ext4: add warn_on_error mount option This is very handy when debugging bugs handling maliciously corrupted file systems. Signed-off-by: Theodore Ts'o --- fs/ext4/ext4.h | 1 + fs/ext4/super.c | 13 ++++++++++++- 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index fa52b7dd4542..856b6a54d82b 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1108,6 +1108,7 @@ struct ext4_inode_info { #define EXT4_MOUNT_DIOREAD_NOLOCK 0x400000 /* Enable support for dio read nolocking */ #define EXT4_MOUNT_JOURNAL_CHECKSUM 0x800000 /* Journal checksums */ #define EXT4_MOUNT_JOURNAL_ASYNC_COMMIT 0x1000000 /* Journal Async Commit */ +#define EXT4_MOUNT_WARN_ON_ERROR 0x2000000 /* Trigger WARN_ON on error */ #define EXT4_MOUNT_DELALLOC 0x8000000 /* Delalloc support */ #define EXT4_MOUNT_DATA_ERR_ABORT 0x10000000 /* Abort on file data write */ #define EXT4_MOUNT_BLOCK_VALIDITY 0x20000000 /* Block validity checking */ diff --git a/fs/ext4/super.c b/fs/ext4/super.c index c1c5c8775ae7..c8b7b8302e90 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -405,6 +405,9 @@ static void ext4_journal_commit_callback(journal_t *journal, transaction_t *txn) static void ext4_handle_error(struct super_block *sb) { + if (test_opt(sb, WARN_ON_ERROR)) + WARN_ON_ONCE(1); + if (sb_rdonly(sb)) return; @@ -740,6 +743,9 @@ __acquires(bitlock) va_end(args); } + if (test_opt(sb, WARN_ON_ERROR)) + WARN_ON_ONCE(1); + if (test_opt(sb, ERRORS_CONT)) { ext4_commit_super(sb, 0); return; @@ -1377,7 +1383,8 @@ enum { Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_jqfmt_vfsv1, Opt_quota, Opt_noquota, Opt_barrier, Opt_nobarrier, Opt_err, Opt_usrquota, Opt_grpquota, Opt_prjquota, Opt_i_version, Opt_dax, - Opt_stripe, Opt_delalloc, Opt_nodelalloc, Opt_mblk_io_submit, + Opt_stripe, Opt_delalloc, Opt_nodelalloc, Opt_warn_on_error, + Opt_nowarn_on_error, Opt_mblk_io_submit, Opt_lazytime, Opt_nolazytime, Opt_debug_want_extra_isize, Opt_nomblk_io_submit, Opt_block_validity, Opt_noblock_validity, Opt_inode_readahead_blks, Opt_journal_ioprio, @@ -1444,6 +1451,8 @@ static const match_table_t tokens = { {Opt_dax, "dax"}, {Opt_stripe, "stripe=%u"}, {Opt_delalloc, "delalloc"}, + {Opt_warn_on_error, "warn_on_error"}, + {Opt_nowarn_on_error, "nowarn_on_error"}, {Opt_lazytime, "lazytime"}, {Opt_nolazytime, "nolazytime"}, {Opt_debug_want_extra_isize, "debug_want_extra_isize=%u"}, @@ -1608,6 +1617,8 @@ static const struct mount_opts { MOPT_EXT4_ONLY | MOPT_SET | MOPT_EXPLICIT}, {Opt_nodelalloc, EXT4_MOUNT_DELALLOC, MOPT_EXT4_ONLY | MOPT_CLEAR}, + {Opt_warn_on_error, EXT4_MOUNT_WARN_ON_ERROR, MOPT_SET}, + {Opt_nowarn_on_error, EXT4_MOUNT_WARN_ON_ERROR, MOPT_CLEAR}, {Opt_nojournal_checksum, EXT4_MOUNT_JOURNAL_CHECKSUM, MOPT_EXT4_ONLY | MOPT_CLEAR}, {Opt_journal_checksum, EXT4_MOUNT_JOURNAL_CHECKSUM, -- cgit v1.2.3 From 5369a762c882c0b6e9599e4ebbb3a9ba9eee7e2d Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 13 Jun 2018 00:23:11 -0400 Subject: ext4: add corruption check in ext4_xattr_set_entry() In theory this should have been caught earlier when the xattr list was verified, but in case it got missed, it's simple enough to add check to make sure we don't overrun the xattr buffer. This addresses CVE-2018-10879. https://bugzilla.kernel.org/show_bug.cgi?id=200001 Signed-off-by: Theodore Ts'o Reviewed-by: Andreas Dilger Cc: stable@kernel.org --- fs/ext4/xattr.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index fc4ced59c565..230ba79715f6 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1560,7 +1560,7 @@ static int ext4_xattr_set_entry(struct ext4_xattr_info *i, handle_t *handle, struct inode *inode, bool is_block) { - struct ext4_xattr_entry *last; + struct ext4_xattr_entry *last, *next; struct ext4_xattr_entry *here = s->here; size_t min_offs = s->end - s->base, name_len = strlen(i->name); int in_inode = i->in_inode; @@ -1595,7 +1595,13 @@ static int ext4_xattr_set_entry(struct ext4_xattr_info *i, /* Compute min_offs and last. */ last = s->first; - for (; !IS_LAST_ENTRY(last); last = EXT4_XATTR_NEXT(last)) { + for (; !IS_LAST_ENTRY(last); last = next) { + next = EXT4_XATTR_NEXT(last); + if ((void *)next >= s->end) { + EXT4_ERROR_INODE(inode, "corrupted xattr entries"); + ret = -EFSCORRUPTED; + goto out; + } if (!last->e_value_inum && last->e_value_size) { size_t offs = le16_to_cpu(last->e_value_offs); if (offs < min_offs) -- cgit v1.2.3 From 513f86d73855ce556ea9522b6bfd79f87356dc3a Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 13 Jun 2018 00:51:28 -0400 Subject: ext4: always verify the magic number in xattr blocks If there an inode points to a block which is also some other type of metadata block (such as a block allocation bitmap), the buffer_verified flag can be set when it was validated as that other metadata block type; however, it would make a really terrible external attribute block. The reason why we use the verified flag is to avoid constantly reverifying the block. However, it doesn't take much overhead to make sure the magic number of the xattr block is correct, and this will avoid potential crashes. This addresses CVE-2018-10879. https://bugzilla.kernel.org/show_bug.cgi?id=200001 Signed-off-by: Theodore Ts'o Reviewed-by: Andreas Dilger Cc: stable@kernel.org --- fs/ext4/xattr.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 230ba79715f6..0263692979ec 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -230,12 +230,12 @@ __ext4_xattr_check_block(struct inode *inode, struct buffer_head *bh, { int error = -EFSCORRUPTED; - if (buffer_verified(bh)) - return 0; - if (BHDR(bh)->h_magic != cpu_to_le32(EXT4_XATTR_MAGIC) || BHDR(bh)->h_blocks != cpu_to_le32(1)) goto errout; + if (buffer_verified(bh)) + return 0; + error = -EFSBADCRC; if (!ext4_xattr_block_csum_verify(inode, bh)) goto errout; -- cgit v1.2.3 From 74c11e300c103af47db5b658fdcf28002421e250 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Fri, 1 Jun 2018 14:34:33 +0300 Subject: ARC: Explicitly add -mmedium-calls to CFLAGS GCC built for arc*-*-linux has "-mmedium-calls" implicitly enabled by default thus we don't see any problems during Linux kernel compilation. ----------------------------->8------------------------ arc-linux-gcc -mcpu=arc700 -Q --help=target | grep calls -mlong-calls [disabled] -mmedium-calls [enabled] ----------------------------->8------------------------ But if we try to use so-called Elf32 toolchain with GCC configured for arc*-*-elf* then we'd see the following failure: ----------------------------->8------------------------ init/do_mounts.o: In function 'init_rootfs': do_mounts.c:(.init.text+0x108): relocation truncated to fit: R_ARC_S21W_PCREL against symbol 'unregister_filesystem' defined in .text section in fs/filesystems.o arc-elf32-ld: final link failed: Symbol needs debug section which does not exist make: *** [vmlinux] Error 1 ----------------------------->8------------------------ That happens because neither "-mmedium-calls" nor "-mlong-calls" are enabled in Elf32 GCC: ----------------------------->8------------------------ arc-elf32-gcc -mcpu=arc700 -Q --help=target | grep calls -mlong-calls [disabled] -mmedium-calls [disabled] ----------------------------->8------------------------ Now to make it possible to use Elf32 toolchain for building Linux kernel we're explicitly add "-mmedium-calls" to CFLAGS. And since we add "-mmedium-calls" to the global CFLAGS there's no point in having per-file copies thus removing them. Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/Makefile | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/arch/arc/Makefile b/arch/arc/Makefile index d37f49d6a27f..6c1b20dd76ad 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -16,7 +16,7 @@ endif KBUILD_DEFCONFIG := nsim_700_defconfig -cflags-y += -fno-common -pipe -fno-builtin -D__linux__ +cflags-y += -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__ cflags-$(CONFIG_ISA_ARCOMPACT) += -mA7 cflags-$(CONFIG_ISA_ARCV2) += -mcpu=archs @@ -140,16 +140,3 @@ dtbs: scripts archclean: $(Q)$(MAKE) $(clean)=$(boot) - -# Hacks to enable final link due to absence of link-time branch relexation -# and gcc choosing optimal(shorter) branches at -O3 -# -# vineetg Feb 2010: -mlong-calls switched off for overall kernel build -# However lib/decompress_inflate.o (.init.text) calls -# zlib_inflate_workspacesize (.text) causing relocation errors. -# Thus forcing all exten calls in this file to be long calls -export CFLAGS_decompress_inflate.o = -mmedium-calls -export CFLAGS_initramfs.o = -mmedium-calls -ifdef CONFIG_SMP -export CFLAGS_core.o = -mmedium-calls -endif -- cgit v1.2.3 From 819b23f1c501b17b9694325471789e6b5cc2d0d2 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 13 Jun 2018 23:00:48 -0400 Subject: ext4: always check block group bounds in ext4_init_block_bitmap() Regardless of whether the flex_bg feature is set, we should always check to make sure the bits we are setting in the block bitmap are within the block group bounds. https://bugzilla.kernel.org/show_bug.cgi?id=199865 Signed-off-by: Theodore Ts'o Cc: stable@kernel.org --- fs/ext4/balloc.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index b00481c475cb..8a2e202ade8a 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -184,7 +184,6 @@ static int ext4_init_block_bitmap(struct super_block *sb, unsigned int bit, bit_max; struct ext4_sb_info *sbi = EXT4_SB(sb); ext4_fsblk_t start, tmp; - int flex_bg = 0; J_ASSERT_BH(bh, buffer_locked(bh)); @@ -207,22 +206,19 @@ static int ext4_init_block_bitmap(struct super_block *sb, start = ext4_group_first_block_no(sb, block_group); - if (ext4_has_feature_flex_bg(sb)) - flex_bg = 1; - /* Set bits for block and inode bitmaps, and inode table */ tmp = ext4_block_bitmap(sb, gdp); - if (!flex_bg || ext4_block_in_group(sb, tmp, block_group)) + if (ext4_block_in_group(sb, tmp, block_group)) ext4_set_bit(EXT4_B2C(sbi, tmp - start), bh->b_data); tmp = ext4_inode_bitmap(sb, gdp); - if (!flex_bg || ext4_block_in_group(sb, tmp, block_group)) + if (ext4_block_in_group(sb, tmp, block_group)) ext4_set_bit(EXT4_B2C(sbi, tmp - start), bh->b_data); tmp = ext4_inode_table(sb, gdp); for (; tmp < ext4_inode_table(sb, gdp) + sbi->s_itb_per_group; tmp++) { - if (!flex_bg || ext4_block_in_group(sb, tmp, block_group)) + if (ext4_block_in_group(sb, tmp, block_group)) ext4_set_bit(EXT4_B2C(sbi, tmp - start), bh->b_data); } -- cgit v1.2.3 From 77260807d1170a8cf35dbb06e07461a655f67eee Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 13 Jun 2018 23:08:26 -0400 Subject: ext4: make sure bitmaps and the inode table don't overlap with bg descriptors It's really bad when the allocation bitmaps and the inode table overlap with the block group descriptors, since it causes random corruption of the bg descriptors. So we really want to head those off at the pass. https://bugzilla.kernel.org/show_bug.cgi?id=199865 Signed-off-by: Theodore Ts'o Cc: stable@kernel.org --- fs/ext4/super.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index c8b7b8302e90..c61675d62195 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2348,6 +2348,7 @@ static int ext4_check_descriptors(struct super_block *sb, struct ext4_sb_info *sbi = EXT4_SB(sb); ext4_fsblk_t first_block = le32_to_cpu(sbi->s_es->s_first_data_block); ext4_fsblk_t last_block; + ext4_fsblk_t last_bg_block = sb_block + ext4_bg_num_gdb(sb, 0) + 1; ext4_fsblk_t block_bitmap; ext4_fsblk_t inode_bitmap; ext4_fsblk_t inode_table; @@ -2380,6 +2381,14 @@ static int ext4_check_descriptors(struct super_block *sb, if (!sb_rdonly(sb)) return 0; } + if (block_bitmap >= sb_block + 1 && + block_bitmap <= last_bg_block) { + ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " + "Block bitmap for group %u overlaps " + "block group descriptors", i); + if (!sb_rdonly(sb)) + return 0; + } if (block_bitmap < first_block || block_bitmap > last_block) { ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " "Block bitmap for group %u not in group " @@ -2394,6 +2403,14 @@ static int ext4_check_descriptors(struct super_block *sb, if (!sb_rdonly(sb)) return 0; } + if (inode_bitmap >= sb_block + 1 && + inode_bitmap <= last_bg_block) { + ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " + "Inode bitmap for group %u overlaps " + "block group descriptors", i); + if (!sb_rdonly(sb)) + return 0; + } if (inode_bitmap < first_block || inode_bitmap > last_block) { ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " "Inode bitmap for group %u not in group " @@ -2408,6 +2425,14 @@ static int ext4_check_descriptors(struct super_block *sb, if (!sb_rdonly(sb)) return 0; } + if (inode_table >= sb_block + 1 && + inode_table <= last_bg_block) { + ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " + "Inode table for group %u overlaps " + "block group descriptors", i); + if (!sb_rdonly(sb)) + return 0; + } if (inode_table < first_block || inode_table + sbi->s_itb_per_group - 1 > last_block) { ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " -- cgit v1.2.3 From 8844618d8aa7a9973e7b527d038a2a589665002c Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 14 Jun 2018 00:58:00 -0400 Subject: ext4: only look at the bg_flags field if it is valid The bg_flags field in the block group descripts is only valid if the uninit_bg or metadata_csum feature is enabled. We were not consistently looking at this field; fix this. Also block group #0 must never have uninitialized allocation bitmaps, or need to be zeroed, since that's where the root inode, and other special inodes are set up. Check for these conditions and mark the file system as corrupted if they are detected. This addresses CVE-2018-10876. https://bugzilla.kernel.org/show_bug.cgi?id=199403 Signed-off-by: Theodore Ts'o Cc: stable@kernel.org --- fs/ext4/balloc.c | 11 ++++++++++- fs/ext4/ialloc.c | 14 ++++++++++++-- fs/ext4/mballoc.c | 6 ++++-- fs/ext4/super.c | 11 ++++++++++- 4 files changed, 36 insertions(+), 6 deletions(-) diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index 8a2e202ade8a..e68cefe08261 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -438,7 +438,16 @@ ext4_read_block_bitmap_nowait(struct super_block *sb, ext4_group_t block_group) goto verify; } ext4_lock_group(sb, block_group); - if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) { + if (ext4_has_group_desc_csum(sb) && + (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT))) { + if (block_group == 0) { + ext4_unlock_group(sb, block_group); + unlock_buffer(bh); + ext4_error(sb, "Block bitmap for bg 0 marked " + "uninitialized"); + err = -EFSCORRUPTED; + goto out; + } err = ext4_init_block_bitmap(sb, bh, block_group, desc); set_bitmap_uptodate(bh); set_buffer_uptodate(bh); diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index 4d6e007f3569..da6c10c1e37a 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -150,7 +150,16 @@ ext4_read_inode_bitmap(struct super_block *sb, ext4_group_t block_group) } ext4_lock_group(sb, block_group); - if (desc->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT)) { + if (ext4_has_group_desc_csum(sb) && + (desc->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT))) { + if (block_group == 0) { + ext4_unlock_group(sb, block_group); + unlock_buffer(bh); + ext4_error(sb, "Inode bitmap for bg 0 marked " + "uninitialized"); + err = -EFSCORRUPTED; + goto out; + } memset(bh->b_data, 0, (EXT4_INODES_PER_GROUP(sb) + 7) / 8); ext4_mark_bitmap_end(EXT4_INODES_PER_GROUP(sb), sb->s_blocksize * 8, bh->b_data); @@ -994,7 +1003,8 @@ got: /* recheck and clear flag under lock if we still need to */ ext4_lock_group(sb, group); - if (gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) { + if (ext4_has_group_desc_csum(sb) && + (gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT))) { gdp->bg_flags &= cpu_to_le16(~EXT4_BG_BLOCK_UNINIT); ext4_free_group_clusters_set(sb, gdp, ext4_free_clusters_after_init(sb, group, gdp)); diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 243c42fdc155..402c769c51ea 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2444,7 +2444,8 @@ int ext4_mb_add_groupinfo(struct super_block *sb, ext4_group_t group, * initialize bb_free to be able to skip * empty groups without initialization */ - if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) { + if (ext4_has_group_desc_csum(sb) && + (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT))) { meta_group_info[i]->bb_free = ext4_free_clusters_after_init(sb, group, desc); } else { @@ -3010,7 +3011,8 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac, #endif ext4_set_bits(bitmap_bh->b_data, ac->ac_b_ex.fe_start, ac->ac_b_ex.fe_len); - if (gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) { + if (ext4_has_group_desc_csum(sb) && + (gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT))) { gdp->bg_flags &= cpu_to_le16(~EXT4_BG_BLOCK_UNINIT); ext4_free_group_clusters_set(sb, gdp, ext4_free_clusters_after_init(sb, diff --git a/fs/ext4/super.c b/fs/ext4/super.c index c61675d62195..4d34430d75f6 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3139,13 +3139,22 @@ static ext4_group_t ext4_has_uninit_itable(struct super_block *sb) ext4_group_t group, ngroups = EXT4_SB(sb)->s_groups_count; struct ext4_group_desc *gdp = NULL; + if (!ext4_has_group_desc_csum(sb)) + return ngroups; + for (group = 0; group < ngroups; group++) { gdp = ext4_get_group_desc(sb, group, NULL); if (!gdp) continue; - if (!(gdp->bg_flags & cpu_to_le16(EXT4_BG_INODE_ZEROED))) + if (gdp->bg_flags & cpu_to_le16(EXT4_BG_INODE_ZEROED)) + continue; + if (group != 0) break; + ext4_error(sb, "Inode table for bg 0 marked as " + "needing zeroing"); + if (sb_rdonly(sb)) + return ngroups; } return group; -- cgit v1.2.3 From bc890a60247171294acc0bd67d211fa4b88d40ba Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 14 Jun 2018 12:55:10 -0400 Subject: ext4: verify the depth of extent tree in ext4_find_extent() If there is a corupted file system where the claimed depth of the extent tree is -1, this can cause a massive buffer overrun leading to sadness. This addresses CVE-2018-10877. https://bugzilla.kernel.org/show_bug.cgi?id=199417 Signed-off-by: Theodore Ts'o Cc: stable@kernel.org --- fs/ext4/ext4_extents.h | 1 + fs/ext4/extents.c | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/fs/ext4/ext4_extents.h b/fs/ext4/ext4_extents.h index 98fb0c119c68..adf6668b596f 100644 --- a/fs/ext4/ext4_extents.h +++ b/fs/ext4/ext4_extents.h @@ -91,6 +91,7 @@ struct ext4_extent_header { }; #define EXT4_EXT_MAGIC cpu_to_le16(0xf30a) +#define EXT4_MAX_EXTENT_DEPTH 5 #define EXT4_EXTENT_TAIL_OFFSET(hdr) \ (sizeof(struct ext4_extent_header) + \ diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index c969275ce3ee..08226f72b7ee 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -869,6 +869,12 @@ ext4_find_extent(struct inode *inode, ext4_lblk_t block, eh = ext_inode_hdr(inode); depth = ext_depth(inode); + if (depth < 0 || depth > EXT4_MAX_EXTENT_DEPTH) { + EXT4_ERROR_INODE(inode, "inode has invalid extent depth: %d", + depth); + ret = -EFSCORRUPTED; + goto err; + } if (path) { ext4_ext_drop_refs(path); -- cgit v1.2.3 From bdbd6ce01a70f02e9373a584d0ae9538dcf0a121 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 15 Jun 2018 12:27:16 -0400 Subject: ext4: include the illegal physical block in the bad map ext4_error msg Signed-off-by: Theodore Ts'o Cc: stable@kernel.org --- fs/ext4/inode.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 2ea07efbe016..c2f4ccb880c4 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -402,9 +402,9 @@ static int __check_block_validity(struct inode *inode, const char *func, if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), map->m_pblk, map->m_len)) { ext4_error_inode(inode, func, line, map->m_pblk, - "lblock %lu mapped to illegal pblock " + "lblock %lu mapped to illegal pblock %llu " "(length %d)", (unsigned long) map->m_lblk, - map->m_len); + map->m_pblk, map->m_len); return -EFSCORRUPTED; } return 0; -- cgit v1.2.3 From 6e8ab72a812396996035a37e5ca4b3b99b5d214b Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 15 Jun 2018 12:28:16 -0400 Subject: ext4: clear i_data in ext4_inode_info when removing inline data When converting from an inode from storing the data in-line to a data block, ext4_destroy_inline_data_nolock() was only clearing the on-disk copy of the i_blocks[] array. It was not clearing copy of the i_blocks[] in ext4_inode_info, in i_data[], which is the copy actually used by ext4_map_blocks(). This didn't matter much if we are using extents, since the extents header would be invalid and thus the extents could would re-initialize the extents tree. But if we are using indirect blocks, the previous contents of the i_blocks array will be treated as block numbers, with potentially catastrophic results to the file system integrity and/or user data. This gets worse if the file system is using a 1k block size and s_first_data is zero, but even without this, the file system can get quite badly corrupted. This addresses CVE-2018-10881. https://bugzilla.kernel.org/show_bug.cgi?id=200015 Signed-off-by: Theodore Ts'o Cc: stable@kernel.org --- fs/ext4/inline.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index 44b4fcdc3755..d79115d8d716 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -437,6 +437,7 @@ static int ext4_destroy_inline_data_nolock(handle_t *handle, memset((void *)ext4_raw_inode(&is.iloc)->i_block, 0, EXT4_MIN_INLINE_DATA_SIZE); + memset(ei->i_data, 0, EXT4_MIN_INLINE_DATA_SIZE); if (ext4_has_feature_extents(inode->i_sb)) { if (S_ISDIR(inode->i_mode) || -- cgit v1.2.3 From 8cdb5240ec5928b20490a2bb34cb87e9a5f40226 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 16 Jun 2018 15:40:48 -0400 Subject: ext4: never move the system.data xattr out of the inode body When expanding the extra isize space, we must never move the system.data xattr out of the inode body. For performance reasons, it doesn't make any sense, and the inline data implementation assumes that system.data xattr is never in the external xattr block. This addresses CVE-2018-10880 https://bugzilla.kernel.org/show_bug.cgi?id=200005 Signed-off-by: Theodore Ts'o Cc: stable@kernel.org --- fs/ext4/xattr.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 0263692979ec..72377b77fbd7 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -2657,6 +2657,11 @@ static int ext4_xattr_make_inode_space(handle_t *handle, struct inode *inode, last = IFIRST(header); /* Find the entry best suited to be pushed into EA block */ for (; !IS_LAST_ENTRY(last); last = EXT4_XATTR_NEXT(last)) { + /* never move system.data out of the inode */ + if ((last->e_name_len == 4) && + (last->e_name_index == EXT4_XATTR_INDEX_SYSTEM) && + !memcmp(last->e_name, "data", 4)) + continue; total_size = EXT4_XATTR_LEN(last->e_name_len); if (!last->e_value_inum) total_size += EXT4_XATTR_SIZE( -- cgit v1.2.3 From e09463f220ca9a1a1ecfda84fcda658f99a1f12a Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 16 Jun 2018 20:21:45 -0400 Subject: jbd2: don't mark block as modified if the handle is out of credits Do not set the b_modified flag in block's journal head should not until after we're sure that jbd2_journal_dirty_metadat() will not abort with an error due to there not being enough space reserved in the jbd2 handle. Otherwise, future attempts to modify the buffer may lead a large number of spurious errors and warnings. This addresses CVE-2018-10883. https://bugzilla.kernel.org/show_bug.cgi?id=200071 Signed-off-by: Theodore Ts'o Cc: stable@kernel.org --- fs/jbd2/transaction.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c index 51dd68e67b0f..c0b66a7a795b 100644 --- a/fs/jbd2/transaction.c +++ b/fs/jbd2/transaction.c @@ -1361,6 +1361,13 @@ int jbd2_journal_dirty_metadata(handle_t *handle, struct buffer_head *bh) if (jh->b_transaction == transaction && jh->b_jlist != BJ_Metadata) { jbd_lock_bh_state(bh); + if (jh->b_transaction == transaction && + jh->b_jlist != BJ_Metadata) + pr_err("JBD2: assertion failure: h_type=%u " + "h_line_no=%u block_no=%llu jlist=%u\n", + handle->h_type, handle->h_line_no, + (unsigned long long) bh->b_blocknr, + jh->b_jlist); J_ASSERT_JH(jh, jh->b_transaction != transaction || jh->b_jlist == BJ_Metadata); jbd_unlock_bh_state(bh); @@ -1380,11 +1387,11 @@ int jbd2_journal_dirty_metadata(handle_t *handle, struct buffer_head *bh) * of the transaction. This needs to be done * once a transaction -bzzz */ - jh->b_modified = 1; if (handle->h_buffer_credits <= 0) { ret = -ENOSPC; goto out_unlock_bh; } + jh->b_modified = 1; handle->h_buffer_credits--; } -- cgit v1.2.3 From 8bc1379b82b8e809eef77a9fedbb75c6c297be19 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 16 Jun 2018 23:41:59 -0400 Subject: ext4: avoid running out of journal credits when appending to an inline file Use a separate journal transaction if it turns out that we need to convert an inline file to use an data block. Otherwise we could end up failing due to not having journal credits. This addresses CVE-2018-10883. https://bugzilla.kernel.org/show_bug.cgi?id=200071 Signed-off-by: Theodore Ts'o Cc: stable@kernel.org --- fs/ext4/ext4.h | 3 --- fs/ext4/inline.c | 38 +------------------------------------- fs/ext4/xattr.c | 19 ++----------------- 3 files changed, 3 insertions(+), 57 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 856b6a54d82b..859d6433dcc1 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -3013,9 +3013,6 @@ extern int ext4_inline_data_fiemap(struct inode *inode, struct iomap; extern int ext4_inline_data_iomap(struct inode *inode, struct iomap *iomap); -extern int ext4_try_to_evict_inline_data(handle_t *handle, - struct inode *inode, - int needed); extern int ext4_inline_data_truncate(struct inode *inode, int *has_inline); extern int ext4_convert_inline_data(struct inode *inode); diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index d79115d8d716..851bc552d849 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -887,11 +887,11 @@ retry_journal: flags |= AOP_FLAG_NOFS; if (ret == -ENOSPC) { + ext4_journal_stop(handle); ret = ext4_da_convert_inline_data_to_extent(mapping, inode, flags, fsdata); - ext4_journal_stop(handle); if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) goto retry_journal; @@ -1891,42 +1891,6 @@ out: return (error < 0 ? error : 0); } -/* - * Called during xattr set, and if we can sparse space 'needed', - * just create the extent tree evict the data to the outer block. - * - * We use jbd2 instead of page cache to move data to the 1st block - * so that the whole transaction can be committed as a whole and - * the data isn't lost because of the delayed page cache write. - */ -int ext4_try_to_evict_inline_data(handle_t *handle, - struct inode *inode, - int needed) -{ - int error; - struct ext4_xattr_entry *entry; - struct ext4_inode *raw_inode; - struct ext4_iloc iloc; - - error = ext4_get_inode_loc(inode, &iloc); - if (error) - return error; - - raw_inode = ext4_raw_inode(&iloc); - entry = (struct ext4_xattr_entry *)((void *)raw_inode + - EXT4_I(inode)->i_inline_off); - if (EXT4_XATTR_LEN(entry->e_name_len) + - EXT4_XATTR_SIZE(le32_to_cpu(entry->e_value_size)) < needed) { - error = -ENOSPC; - goto out; - } - - error = ext4_convert_inline_data_nolock(handle, inode, &iloc); -out: - brelse(iloc.bh); - return error; -} - int ext4_inline_data_truncate(struct inode *inode, int *has_inline) { handle_t *handle; diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 72377b77fbd7..723df14f4084 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -2212,23 +2212,8 @@ int ext4_xattr_ibody_inline_set(handle_t *handle, struct inode *inode, if (EXT4_I(inode)->i_extra_isize == 0) return -ENOSPC; error = ext4_xattr_set_entry(i, s, handle, inode, false /* is_block */); - if (error) { - if (error == -ENOSPC && - ext4_has_inline_data(inode)) { - error = ext4_try_to_evict_inline_data(handle, inode, - EXT4_XATTR_LEN(strlen(i->name) + - EXT4_XATTR_SIZE(i->value_len))); - if (error) - return error; - error = ext4_xattr_ibody_find(inode, i, is); - if (error) - return error; - error = ext4_xattr_set_entry(i, s, handle, inode, - false /* is_block */); - } - if (error) - return error; - } + if (error) + return error; header = IHDR(inode, ext4_raw_inode(&is->iloc)); if (!IS_LAST_ENTRY(s->first)) { header->h_magic = cpu_to_le32(EXT4_XATTR_MAGIC); -- cgit v1.2.3 From c37e9e013469521d9adb932d17a1795c139b36db Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sun, 17 Jun 2018 00:41:14 -0400 Subject: ext4: add more inode number paranoia checks If there is a directory entry pointing to a system inode (such as a journal inode), complain and declare the file system to be corrupted. Also, if the superblock's first inode number field is too small, refuse to mount the file system. This addresses CVE-2018-10882. https://bugzilla.kernel.org/show_bug.cgi?id=200069 Signed-off-by: Theodore Ts'o Cc: stable@kernel.org --- fs/ext4/ext4.h | 5 ----- fs/ext4/inode.c | 3 ++- fs/ext4/super.c | 5 +++++ 3 files changed, 7 insertions(+), 6 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 859d6433dcc1..4bd69649a048 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1502,11 +1502,6 @@ static inline struct ext4_inode_info *EXT4_I(struct inode *inode) static inline int ext4_valid_inum(struct super_block *sb, unsigned long ino) { return ino == EXT4_ROOT_INO || - ino == EXT4_USR_QUOTA_INO || - ino == EXT4_GRP_QUOTA_INO || - ino == EXT4_BOOT_LOADER_INO || - ino == EXT4_JOURNAL_INO || - ino == EXT4_RESIZE_INO || (ino >= EXT4_FIRST_INO(sb) && ino <= le32_to_cpu(EXT4_SB(sb)->s_es->s_inodes_count)); } diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index c2f4ccb880c4..7d6c10017bdf 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4506,7 +4506,8 @@ static int __ext4_get_inode_loc(struct inode *inode, int inodes_per_block, inode_offset; iloc->bh = NULL; - if (!ext4_valid_inum(sb, inode->i_ino)) + if (inode->i_ino < EXT4_ROOT_INO || + inode->i_ino > le32_to_cpu(EXT4_SB(sb)->s_es->s_inodes_count)) return -EFSCORRUPTED; iloc->block_group = (inode->i_ino - 1) / EXT4_INODES_PER_GROUP(sb); diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 4d34430d75f6..1f955c128e0d 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3858,6 +3858,11 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) } else { sbi->s_inode_size = le16_to_cpu(es->s_inode_size); sbi->s_first_ino = le32_to_cpu(es->s_first_ino); + if (sbi->s_first_ino < EXT4_GOOD_OLD_FIRST_INO) { + ext4_msg(sb, KERN_ERR, "invalid first ino: %u", + sbi->s_first_ino); + goto failed_mount; + } if ((sbi->s_inode_size < EXT4_GOOD_OLD_INODE_SIZE) || (!is_power_of_2(sbi->s_inode_size)) || (sbi->s_inode_size > blocksize)) { -- cgit v1.2.3 From df07101e1c4a29e820df02f9989a066988b160e6 Mon Sep 17 00:00:00 2001 From: Sean Nyekjaer Date: Tue, 22 May 2018 19:45:09 +0200 Subject: ARM: dts: imx6q: Use correct SDMA script for SPI5 core According to the reference manual the shp_2_mcu / mcu_2_shp scripts must be used for devices connected through the SPBA. This fixes an issue we saw with DMA transfers. Sometimes the SPI controller RX FIFO was not empty after a DMA transfer and the driver got stuck in the next PIO transfer when it read one word more than expected. commit dd4b487b32a35 ("ARM: dts: imx6: Use correct SDMA script for SPI cores") is fixing the same issue but only for SPI1 - 4. Fixes: 677940258dd8e ("ARM: dts: imx6q: enable dma for ecspi5") Signed-off-by: Sean Nyekjaer Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 70483ce72ba6..77f8f030dd07 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -90,7 +90,7 @@ clocks = <&clks IMX6Q_CLK_ECSPI5>, <&clks IMX6Q_CLK_ECSPI5>; clock-names = "ipg", "per"; - dmas = <&sdma 11 7 1>, <&sdma 12 7 2>; + dmas = <&sdma 11 8 1>, <&sdma 12 8 2>; dma-names = "rx", "tx"; status = "disabled"; }; -- cgit v1.2.3 From d5a6cabf02210b896a60eee7c04c670ee9ba6dca Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 13 Jun 2018 12:43:10 +0200 Subject: ALSA: hda/realtek - Fix pop noise on Lenovo P50 & co Some Lenovo laptops, e.g. Lenovo P50, showed the pop noise at resume or runtime resume. It turned out to be reduced by applying alc_no_shutup() just like TPT440 quirk does. Since there are many Lenovo models showing the same behavior, put this workaround in ALC269_FIXUP_THINKPAD_ACPI entry so that it's applied commonly to all such Lenovo machines. Reported-by: Hans de Goede Tested-by: Benjamin Berg Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e9bd33ea538f..487ceb9fd038 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4995,7 +4995,6 @@ static void alc_fixup_tpt440_dock(struct hda_codec *codec, struct alc_spec *spec = codec->spec; if (action == HDA_FIXUP_ACT_PRE_PROBE) { - spec->shutup = alc_no_shutup; /* reduce click noise */ spec->reboot_notify = alc_d3_at_reboot; /* reduce noise */ spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP; codec->power_save_node = 0; /* avoid click noises */ @@ -5394,6 +5393,13 @@ static void alc274_fixup_bind_dacs(struct hda_codec *codec, /* for hda_fixup_thinkpad_acpi() */ #include "thinkpad_helper.c" +static void alc_fixup_thinkpad_acpi(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + alc_fixup_no_shutup(codec, fix, action); /* reduce click noise */ + hda_fixup_thinkpad_acpi(codec, fix, action); +} + /* for dell wmi mic mute led */ #include "dell_wmi_helper.c" @@ -5946,7 +5952,7 @@ static const struct hda_fixup alc269_fixups[] = { }, [ALC269_FIXUP_THINKPAD_ACPI] = { .type = HDA_FIXUP_FUNC, - .v.func = hda_fixup_thinkpad_acpi, + .v.func = alc_fixup_thinkpad_acpi, .chained = true, .chain_id = ALC269_FIXUP_SKU_IGNORE, }, -- cgit v1.2.3 From 7919cd82b9f9be97111be386cbaac59958800ef9 Mon Sep 17 00:00:00 2001 From: Alastair Bridgewater Date: Fri, 15 Jun 2018 21:56:15 -0400 Subject: ALSA: hda/ca0132: Delete pointless assignments to struct auto_pin_cfg fields ca0132_config() was setting some values in the auto_pin_cfg for the codec... but it is called prior to snd_hda_parse_pin_defcfg(), which does a memset() to clear the entire structure as one of its first actions, making the entire exercise pointless. Kill all use of struct auto_pin_cfg from ca0132_config(). Signed-off-by: Alastair Bridgewater Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 04e949aa01ad..c66834a9bac6 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -7343,7 +7343,6 @@ static const struct hda_codec_ops ca0132_patch_ops = { static void ca0132_config(struct hda_codec *codec) { struct ca0132_spec *spec = codec->spec; - struct auto_pin_cfg *cfg = &spec->autocfg; spec->dacs[0] = 0x2; spec->dacs[1] = 0x3; @@ -7405,12 +7404,7 @@ static void ca0132_config(struct hda_codec *codec) /* SPDIF I/O */ spec->dig_out = 0x05; spec->multiout.dig_out_nid = spec->dig_out; - cfg->dig_out_pins[0] = 0x0c; - cfg->dig_outs = 1; - cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF; spec->dig_in = 0x09; - cfg->dig_in_pin = 0x0e; - cfg->dig_in_type = HDA_PCM_TYPE_SPDIF; break; case QUIRK_R3DI: codec_dbg(codec, "%s: QUIRK_R3DI applied.\n", __func__); @@ -7438,9 +7432,6 @@ static void ca0132_config(struct hda_codec *codec) /* SPDIF I/O */ spec->dig_out = 0x05; spec->multiout.dig_out_nid = spec->dig_out; - cfg->dig_out_pins[0] = 0x0c; - cfg->dig_outs = 1; - cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF; break; default: spec->num_outputs = 2; @@ -7463,12 +7454,7 @@ static void ca0132_config(struct hda_codec *codec) /* SPDIF I/O */ spec->dig_out = 0x05; spec->multiout.dig_out_nid = spec->dig_out; - cfg->dig_out_pins[0] = 0x0c; - cfg->dig_outs = 1; - cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF; spec->dig_in = 0x09; - cfg->dig_in_pin = 0x0e; - cfg->dig_in_type = HDA_PCM_TYPE_SPDIF; break; } } -- cgit v1.2.3 From a3d90d6775e2066a100b9124e40880bd317d2e02 Mon Sep 17 00:00:00 2001 From: Alastair Bridgewater Date: Fri, 15 Jun 2018 21:56:16 -0400 Subject: ALSA: hda/ca0132: Delete redundant UNSOL event requests During ca0132_init(), ca0132_init_unsol() is run before the spec->spec_init_verbs are written. ca0132_init_unsol() calls snd_hda_jack_detect_enable_callback(), which requests UNSOL events for three or four nodes, two of which were also (redundantly) requested by spec_init_verbs. Kill the redundant AC_VERB_SET_UNSOLICITED_ENABLE verbs. Signed-off-by: Alastair Bridgewater Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 32 +++++++++++--------------------- 1 file changed, 11 insertions(+), 21 deletions(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index c66834a9bac6..dba731c0bf53 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -7462,7 +7462,7 @@ static void ca0132_config(struct hda_codec *codec) static int ca0132_prepare_verbs(struct hda_codec *codec) { /* Verbs + terminator (an empty element) */ -#define NUM_SPEC_VERBS 4 +#define NUM_SPEC_VERBS 2 struct ca0132_spec *spec = codec->spec; spec->chip_init_verbs = ca0132_init_verbs0; @@ -7474,34 +7474,24 @@ static int ca0132_prepare_verbs(struct hda_codec *codec) if (!spec->spec_init_verbs) return -ENOMEM; - /* HP jack autodetection */ - spec->spec_init_verbs[0].nid = spec->unsol_tag_hp; - spec->spec_init_verbs[0].param = AC_VERB_SET_UNSOLICITED_ENABLE; - spec->spec_init_verbs[0].verb = AC_USRSP_EN | spec->unsol_tag_hp; - - /* MIC1 jack autodetection */ - spec->spec_init_verbs[1].nid = spec->unsol_tag_amic1; - spec->spec_init_verbs[1].param = AC_VERB_SET_UNSOLICITED_ENABLE; - spec->spec_init_verbs[1].verb = AC_USRSP_EN | spec->unsol_tag_amic1; - /* config EAPD */ - spec->spec_init_verbs[2].nid = 0x0b; - spec->spec_init_verbs[2].param = 0x78D; - spec->spec_init_verbs[2].verb = 0x00; + spec->spec_init_verbs[0].nid = 0x0b; + spec->spec_init_verbs[0].param = 0x78D; + spec->spec_init_verbs[0].verb = 0x00; /* Previously commented configuration */ /* - spec->spec_init_verbs[3].nid = 0x0b; - spec->spec_init_verbs[3].param = AC_VERB_SET_EAPD_BTLENABLE; + spec->spec_init_verbs[2].nid = 0x0b; + spec->spec_init_verbs[2].param = AC_VERB_SET_EAPD_BTLENABLE; + spec->spec_init_verbs[2].verb = 0x02; + + spec->spec_init_verbs[3].nid = 0x10; + spec->spec_init_verbs[3].param = 0x78D; spec->spec_init_verbs[3].verb = 0x02; spec->spec_init_verbs[4].nid = 0x10; - spec->spec_init_verbs[4].param = 0x78D; + spec->spec_init_verbs[4].param = AC_VERB_SET_EAPD_BTLENABLE; spec->spec_init_verbs[4].verb = 0x02; - - spec->spec_init_verbs[5].nid = 0x10; - spec->spec_init_verbs[5].param = AC_VERB_SET_EAPD_BTLENABLE; - spec->spec_init_verbs[5].verb = 0x02; */ /* Terminator: spec->spec_init_verbs[NUM_SPEC_VERBS-1] */ -- cgit v1.2.3 From 365c7f25cd0a72b16979ba948e6c389a9a89818b Mon Sep 17 00:00:00 2001 From: Alastair Bridgewater Date: Fri, 15 Jun 2018 21:56:17 -0400 Subject: ALSA: hda/ca0132: Restore behavior of QUIRK_ALIENWARE Commit e93ac30a32a6ba7ac3b4b2a4379af1dadb91e505 (ALSA: HDA/ca0132: add extra init functions for r3di + sbz) introduced an extra initialization function that was improperly guarded, taking effect on systems with QUIRK_ALIENWARE, even though such systems were supposedly not affected. It may be that this piece of initialization should be done for all systems, but that's not a call that I can make. Fixes: e93ac30a32a6 ("ALSA: HDA/ca0132: add extra init functions for r3di + sbz") Signed-off-by: Alastair Bridgewater Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index dba731c0bf53..25fccce1eff1 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -7223,7 +7223,7 @@ static int ca0132_init(struct hda_codec *codec) snd_hda_sequence_write(codec, spec->base_init_verbs); - if (spec->quirk != QUIRK_NONE) + if (spec->use_alt_functions) ca0132_alt_init(codec); ca0132_download_dsp(codec); -- cgit v1.2.3 From 126b75e03894f3053b723130cb9b824e6f15d8e6 Mon Sep 17 00:00:00 2001 From: Alastair Bridgewater Date: Fri, 15 Jun 2018 21:56:18 -0400 Subject: ALSA: hda/ca0132: Don't test for QUIRK_NONE QUIRK_NONE is, quite explicitly, the default case. The entire point of a quirks system is to allow "programming by difference" from a given base case, which requires that merely defining a new quirk for some piece of hardware should not change the behavior of the driver for that hardware. In turn, this means that testing for QUIRK_NONE explicitly is a violation of that implicit contract. Change a test for QUIRK_NONE and QUIRK_ALIENWARE to default, and add a test for QUIRK_SBZ to disable the default behavior in that instance. Signed-off-by: Alastair Bridgewater Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 25fccce1eff1..49635d1c9c39 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -7237,8 +7237,9 @@ static int ca0132_init(struct hda_codec *codec) case QUIRK_R3DI: r3di_setup_defaults(codec); break; - case QUIRK_NONE: - case QUIRK_ALIENWARE: + case QUIRK_SBZ: + break; + default: ca0132_setup_defaults(codec); ca0132_init_analog_mic2(codec); ca0132_init_dmic(codec); -- cgit v1.2.3 From 5f8ddc6ee63a9057522923a6b2eb8c51993e1db0 Mon Sep 17 00:00:00 2001 From: Alastair Bridgewater Date: Fri, 15 Jun 2018 21:56:19 -0400 Subject: ALSA: hda/ca0132: Restore PCM Analog Mic-In2 Commit 009b8f979bf8cb5f7ec6d3dd7683585122ed10f8 conditionalized adding the "CA0132 Analog Mic-In2" PCM with a comment to the effect that, "desktops don't use this ADC", but the test was set up such that the ADC was only created for desktops. Invert the test. Fixes: 009b8f979bf8 ("ALSA: hda/ca0132: update core functions for sbz + r3di") Signed-off-by: Alastair Bridgewater Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 49635d1c9c39..09ff85c622bb 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -5966,7 +5966,7 @@ static int ca0132_build_pcms(struct hda_codec *codec) info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[0]; /* With the DSP enabled, desktops don't use this ADC. */ - if (spec->use_alt_functions) { + if (!spec->use_alt_functions) { info = snd_hda_codec_pcm_new(codec, "CA0132 Analog Mic-In2"); if (!info) return -ENOMEM; -- cgit v1.2.3 From a57a46b93244a0a916b894d8b2ca2a6cfe1904d3 Mon Sep 17 00:00:00 2001 From: Alastair Bridgewater Date: Fri, 15 Jun 2018 21:56:20 -0400 Subject: ALSA: hda/ca0132: Fix DMic data rate for Alienware M17x R4 The commentary says to use various parameters, and lays out what the mapping is... The code used a 32KHz rate when the comment says that it needs to use a 48KHz rate. And this has been the case since day one. On the Alienware M17x R4, the DMic used to have exceptionally quiet pickup and a lot of noise. Changing the data rate fixes both of these issues. Searching the kernel bug tracker for ca0132-related issues shows no mention of this being an issue for other hardware, and I have no other hardware to test with, so a quirk is used to limit the effect to just the M17x R4. Signed-off-by: Alastair Bridgewater Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 09ff85c622bb..d62c56feaf7d 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -991,6 +991,7 @@ struct ca0132_spec { enum { QUIRK_NONE, QUIRK_ALIENWARE, + QUIRK_ALIENWARE_M17XR4, QUIRK_SBZ, QUIRK_R3DI, }; @@ -1040,6 +1041,7 @@ static const struct hda_pintbl r3di_pincfgs[] = { }; static const struct snd_pci_quirk ca0132_quirks[] = { + SND_PCI_QUIRK(0x1028, 0x057b, "Alienware M17x R4", QUIRK_ALIENWARE_M17XR4), SND_PCI_QUIRK(0x1028, 0x0685, "Alienware 15 2015", QUIRK_ALIENWARE), SND_PCI_QUIRK(0x1028, 0x0688, "Alienware 17 2015", QUIRK_ALIENWARE), SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2 2016", QUIRK_ALIENWARE), @@ -6130,7 +6132,10 @@ static void ca0132_init_dmic(struct hda_codec *codec) * Bit 6: set to select Data2, clear for Data1 * Bit 7: set to enable DMic, clear for AMic */ - val = 0x23; + if (spec->quirk == QUIRK_ALIENWARE_M17XR4) + val = 0x33; + else + val = 0x23; /* keep a copy of dmic ctl val for enable/disable dmic purpuse */ spec->dmic_ctl = val; snd_hda_codec_write(codec, spec->input_pins[0], 0, -- cgit v1.2.3 From 3637f12faf507b0a4b8ac1e7115fc99583ab1db3 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Wed, 30 May 2018 09:30:42 +0800 Subject: soc: imx: gpcv2: correct PGC offset Correct MIPI/PCIe/USB_HSIC's PGC offset based on design RTL, the values in the Reference Manual (Rev. 1, 01/2018 and the older ones) are incorrect. The correct offset values should be as below: 0x800 ~ 0x83F: PGC for core0 of A7 platform; 0x840 ~ 0x87F: PGC for core1 of A7 platform; 0x880 ~ 0x8BF: PGC for SCU of A7 platform; 0xA00 ~ 0xA3F: PGC for fastmix/megamix; 0xC00 ~ 0xC3F: PGC for MIPI PHY; 0xC40 ~ 0xC7F: PGC for PCIe_PHY; 0xC80 ~ 0xCBF: PGC for USB OTG1 PHY; 0xCC0 ~ 0xCFF: PGC for USB OTG2 PHY; 0xD00 ~ 0xD3F: PGC for USB HSIC PHY; Signed-off-by: Anson Huang Fixes: 03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver") Acked-by: Andrey Smirnov Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- drivers/soc/imx/gpcv2.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c index f4e3bd40c72e..6ef18cf8f243 100644 --- a/drivers/soc/imx/gpcv2.c +++ b/drivers/soc/imx/gpcv2.c @@ -39,10 +39,15 @@ #define GPC_M4_PU_PDN_FLG 0x1bc - -#define PGC_MIPI 4 -#define PGC_PCIE 5 -#define PGC_USB_HSIC 8 +/* + * The PGC offset values in Reference Manual + * (Rev. 1, 01/2018 and the older ones) GPC chapter's + * GPC_PGC memory map are incorrect, below offset + * values are from design RTL. + */ +#define PGC_MIPI 16 +#define PGC_PCIE 17 +#define PGC_USB_HSIC 20 #define GPC_PGC_CTRL(n) (0x800 + (n) * 0x40) #define GPC_PGC_SR(n) (GPC_PGC_CTRL(n) + 0xc) -- cgit v1.2.3 From bfe0a5f47ada40d7984de67e59a7d3390b9b9ecc Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sun, 17 Jun 2018 18:11:20 -0400 Subject: ext4: add more mount time checks of the superblock The kernel's ext4 mount-time checks were more permissive than e2fsprogs's libext2fs checks when opening a file system. The superblock is considered too insane for debugfs or e2fsck to operate on it, the kernel has no business trying to mount it. This will make file system fuzzing tools work harder, but the failure cases that they find will be more useful and be easier to evaluate. Signed-off-by: Theodore Ts'o Cc: stable@kernel.org --- fs/ext4/super.c | 37 ++++++++++++++++++++++++++----------- 1 file changed, 26 insertions(+), 11 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 1f955c128e0d..b37b00befd65 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3793,6 +3793,13 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) le32_to_cpu(es->s_log_block_size)); goto failed_mount; } + if (le32_to_cpu(es->s_log_cluster_size) > + (EXT4_MAX_CLUSTER_LOG_SIZE - EXT4_MIN_BLOCK_LOG_SIZE)) { + ext4_msg(sb, KERN_ERR, + "Invalid log cluster size: %u", + le32_to_cpu(es->s_log_cluster_size)); + goto failed_mount; + } if (le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks) > (blocksize / 4)) { ext4_msg(sb, KERN_ERR, @@ -3939,13 +3946,6 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) "block size (%d)", clustersize, blocksize); goto failed_mount; } - if (le32_to_cpu(es->s_log_cluster_size) > - (EXT4_MAX_CLUSTER_LOG_SIZE - EXT4_MIN_BLOCK_LOG_SIZE)) { - ext4_msg(sb, KERN_ERR, - "Invalid log cluster size: %u", - le32_to_cpu(es->s_log_cluster_size)); - goto failed_mount; - } sbi->s_cluster_bits = le32_to_cpu(es->s_log_cluster_size) - le32_to_cpu(es->s_log_block_size); sbi->s_clusters_per_group = @@ -3966,10 +3966,10 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) } } else { if (clustersize != blocksize) { - ext4_warning(sb, "fragment/cluster size (%d) != " - "block size (%d)", clustersize, - blocksize); - clustersize = blocksize; + ext4_msg(sb, KERN_ERR, + "fragment/cluster size (%d) != " + "block size (%d)", clustersize, blocksize); + goto failed_mount; } if (sbi->s_blocks_per_group > blocksize * 8) { ext4_msg(sb, KERN_ERR, @@ -4023,6 +4023,13 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) ext4_blocks_count(es)); goto failed_mount; } + if ((es->s_first_data_block == 0) && (es->s_log_block_size == 0) && + (sbi->s_cluster_ratio == 1)) { + ext4_msg(sb, KERN_WARNING, "bad geometry: first data " + "block is 0 with a 1k block and cluster size"); + goto failed_mount; + } + blocks_count = (ext4_blocks_count(es) - le32_to_cpu(es->s_first_data_block) + EXT4_BLOCKS_PER_GROUP(sb) - 1); @@ -4058,6 +4065,14 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) ret = -ENOMEM; goto failed_mount; } + if (((u64)sbi->s_groups_count * sbi->s_inodes_per_group) != + le32_to_cpu(es->s_inodes_count)) { + ext4_msg(sb, KERN_ERR, "inodes count not valid: %u vs %llu", + le32_to_cpu(es->s_inodes_count), + ((u64)sbi->s_groups_count * sbi->s_inodes_per_group)); + ret = -EINVAL; + goto failed_mount; + } bgl_lock_init(sbi->s_blockgroup_lock); -- cgit v1.2.3 From 2f839823382748664b643daa73f41ee0cc01ced6 Mon Sep 17 00:00:00 2001 From: Karoly Pados Date: Sat, 9 Jun 2018 13:26:08 +0200 Subject: USB: serial: cp210x: add Silicon Labs IDs for Windows Update Silicon Labs defines alternative VID/PID pairs for some chips that when used will automatically install drivers for Windows users without manual intervention. Unfortunately, these IDs are not recognized by the Linux module, so using these IDs improves user experience on one platform but degrades it on Linux. This patch addresses this problem. Signed-off-by: Karoly Pados Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index eb6c26cbe579..14cf657247b6 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -143,8 +143,11 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ + { USB_DEVICE(0x10C4, 0xEA63) }, /* Silicon Labs Windows Update (CP2101-4/CP2102N) */ { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */ + { USB_DEVICE(0x10C4, 0xEA7A) }, /* Silicon Labs Windows Update (CP2105) */ + { USB_DEVICE(0x10C4, 0xEA7B) }, /* Silicon Labs Windows Update (CP2108) */ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */ { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */ -- cgit v1.2.3 From c1e3f64f87381ed3768b9247ab0cd08b41927da6 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Fri, 1 Jun 2018 08:24:08 -0500 Subject: qtnfmac: fix NULL pointer dereference In case *vif* is NULL at 655: if (!vif), the execution path jumps to label out, where *vif* is dereferenced at 679: if (vif->sta_state == QTNF_STA_CONNECTING) Fix this by immediately returning when *vif* is NULL instead of jumping to label out. Addresses-Coverity-ID: 1469567 ("Dereference after null check") Fixes: 480daa9cb62c ("qtnfmac: fix invalid STA state on EAPOL failure") Signed-off-by: Gustavo A. R. Silva Reviewed-by: Sergey Matyukevich Signed-off-by: Kalle Valo --- drivers/net/wireless/quantenna/qtnfmac/cfg80211.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c b/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c index 220e2b710208..ae0ca8006849 100644 --- a/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c +++ b/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c @@ -654,8 +654,7 @@ qtnf_disconnect(struct wiphy *wiphy, struct net_device *dev, vif = qtnf_mac_get_base_vif(mac); if (!vif) { pr_err("MAC%u: primary VIF is not configured\n", mac->macid); - ret = -EFAULT; - goto out; + return -EFAULT; } if (vif->wdev.iftype != NL80211_IFTYPE_STATION) { -- cgit v1.2.3 From 755abd247a3da273af3b90d1dd31bc61794ae7d7 Mon Sep 17 00:00:00 2001 From: Xinming Hu Date: Mon, 11 Jun 2018 09:52:52 +0800 Subject: MAINTAINERS: update Xinming's email address I'd like to use this new gmail from now on. Cc: Ganapathi Bhat Signed-off-by: Xinming Hu Signed-off-by: Kalle Valo --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 9d5eeff51b5f..8dbe8b56010d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8629,7 +8629,7 @@ MARVELL MWIFIEX WIRELESS DRIVER M: Amitkumar Karwar M: Nishant Sarmukadam M: Ganapathi Bhat -M: Xinming Hu +M: Xinming Hu L: linux-wireless@vger.kernel.org S: Maintained F: drivers/net/wireless/marvell/mwifiex/ -- cgit v1.2.3 From 24160628a34af962ac99f2f58e547ac3c4cbd26f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 18 Jun 2018 10:24:03 +0200 Subject: USB: serial: cp210x: add CESINEL device ids Add device ids for CESINEL products. Reported-by: Carlos Barcala Lara Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 14cf657247b6..ee0cc1d90b51 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -95,6 +95,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */ + { USB_DEVICE(0x10C4, 0x817C) }, /* CESINEL MEDCAL N Power Quality Monitor */ + { USB_DEVICE(0x10C4, 0x817D) }, /* CESINEL MEDCAL NT Power Quality Monitor */ + { USB_DEVICE(0x10C4, 0x817E) }, /* CESINEL MEDCAL S Power Quality Monitor */ { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */ { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */ { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */ @@ -112,6 +115,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */ { USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */ { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */ + { USB_DEVICE(0x10C4, 0x82EF) }, /* CESINEL FALCO 6105 AC Power Supply */ + { USB_DEVICE(0x10C4, 0x82F1) }, /* CESINEL MEDCAL EFD Earth Fault Detector */ + { USB_DEVICE(0x10C4, 0x82F2) }, /* CESINEL MEDCAL ST Network Analyzer */ { USB_DEVICE(0x10C4, 0x82F4) }, /* Starizona MicroTouch */ { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ @@ -124,7 +130,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */ { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */ { USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */ + { USB_DEVICE(0x10C4, 0x851E) }, /* CESINEL MEDCAL PT Network Analyzer */ { USB_DEVICE(0x10C4, 0x85A7) }, /* LifeScan OneTouch Verio IQ */ + { USB_DEVICE(0x10C4, 0x85B8) }, /* CESINEL ReCon T Energy Logger */ { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */ { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */ { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ @@ -134,10 +142,13 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8857) }, /* CEL EM357 ZigBee USB Stick */ { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ + { USB_DEVICE(0x10C4, 0x88FB) }, /* CESINEL MEDCAL STII Network Analyzer */ + { USB_DEVICE(0x10C4, 0x8938) }, /* CESINEL MEDCAL S II Network Analyzer */ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */ { USB_DEVICE(0x10C4, 0x8962) }, /* Brim Brothers charging dock */ { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */ { USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */ + { USB_DEVICE(0x10C4, 0x89A4) }, /* CESINEL FTBC Flexible Thyristor Bridge Controller */ { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */ { USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */ { USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */ -- cgit v1.2.3 From 00908693c481f7298adf8cf4d2ff3dfbea8c375f Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 15 Jun 2017 12:57:30 +0300 Subject: usb: dwc3: pci: add support for Intel IceLake PCI IDs for Intel IceLake. Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-pci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index c961a94d136b..f57e7c94b8e5 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -34,6 +34,7 @@ #define PCI_DEVICE_ID_INTEL_GLK 0x31aa #define PCI_DEVICE_ID_INTEL_CNPLP 0x9dee #define PCI_DEVICE_ID_INTEL_CNPH 0xa36e +#define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee #define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -289,6 +290,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPLP), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPH), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICLLP), }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), }, { } /* Terminating Entry */ }; -- cgit v1.2.3 From d52e4d0c0c428bf2ba35074a7495cdb28e2efbae Mon Sep 17 00:00:00 2001 From: Vincent Pelletier Date: Wed, 13 Jun 2018 11:05:06 +0000 Subject: usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers This bug happens only when the UDC needs to sleep during usb_ep_dequeue, as is the case for (at least) dwc3. [ 382.200896] BUG: scheduling while atomic: screen/1808/0x00000100 [ 382.207124] 4 locks held by screen/1808: [ 382.211266] #0: (rcu_callback){....}, at: [] rcu_process_callbacks+0x260/0x440 [ 382.219949] #1: (rcu_read_lock_sched){....}, at: [] percpu_ref_switch_to_atomic_rcu+0xb0/0x130 [ 382.230034] #2: (&(&ctx->ctx_lock)->rlock){....}, at: [] free_ioctx_users+0x23/0xd0 [ 382.230096] #3: (&(&ffs->eps_lock)->rlock){....}, at: [] ffs_aio_cancel+0x20/0x60 [usb_f_fs] [ 382.230160] Modules linked in: usb_f_fs libcomposite configfs bnep btsdio bluetooth ecdh_generic brcmfmac brcmutil intel_powerclamp coretemp dwc3 kvm_intel ulpi udc_core kvm irqbypass crc32_pclmul crc32c_intel pcbc dwc3_pci aesni_intel aes_i586 crypto_simd cryptd ehci_pci ehci_hcd gpio_keys usbcore basincove_gpadc industrialio usb_common [ 382.230407] CPU: 1 PID: 1808 Comm: screen Not tainted 4.14.0-edison+ #117 [ 382.230416] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 [ 382.230425] Call Trace: [ 382.230438] [ 382.230466] dump_stack+0x47/0x62 [ 382.230498] __schedule_bug+0x61/0x80 [ 382.230522] __schedule+0x43/0x7a0 [ 382.230587] schedule+0x5f/0x70 [ 382.230625] dwc3_gadget_ep_dequeue+0x14c/0x270 [dwc3] [ 382.230669] ? do_wait_intr_irq+0x70/0x70 [ 382.230724] usb_ep_dequeue+0x19/0x90 [udc_core] [ 382.230770] ffs_aio_cancel+0x37/0x60 [usb_f_fs] [ 382.230798] kiocb_cancel+0x31/0x40 [ 382.230822] free_ioctx_users+0x4d/0xd0 [ 382.230858] percpu_ref_switch_to_atomic_rcu+0x10a/0x130 [ 382.230881] ? percpu_ref_exit+0x40/0x40 [ 382.230904] rcu_process_callbacks+0x2b3/0x440 [ 382.230965] __do_softirq+0xf8/0x26b [ 382.231011] ? __softirqentry_text_start+0x8/0x8 [ 382.231033] do_softirq_own_stack+0x22/0x30 [ 382.231042] [ 382.231071] irq_exit+0x45/0xc0 [ 382.231089] smp_apic_timer_interrupt+0x13c/0x150 [ 382.231118] apic_timer_interrupt+0x35/0x3c [ 382.231132] EIP: __copy_user_ll+0xe2/0xf0 [ 382.231142] EFLAGS: 00210293 CPU: 1 [ 382.231154] EAX: bfd4508c EBX: 00000004 ECX: 00000003 EDX: f3d8fe50 [ 382.231165] ESI: f3d8fe51 EDI: bfd4508d EBP: f3d8fe14 ESP: f3d8fe08 [ 382.231176] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 382.231265] core_sys_select+0x25f/0x320 [ 382.231346] ? __wake_up_common_lock+0x62/0x80 [ 382.231399] ? tty_ldisc_deref+0x13/0x20 [ 382.231438] ? ldsem_up_read+0x1b/0x40 [ 382.231459] ? tty_ldisc_deref+0x13/0x20 [ 382.231479] ? tty_write+0x29f/0x2e0 [ 382.231514] ? n_tty_ioctl+0xe0/0xe0 [ 382.231541] ? tty_write_unlock+0x30/0x30 [ 382.231566] ? __vfs_write+0x22/0x110 [ 382.231604] ? security_file_permission+0x2f/0xd0 [ 382.231635] ? rw_verify_area+0xac/0x120 [ 382.231677] ? vfs_write+0x103/0x180 [ 382.231711] SyS_select+0x87/0xc0 [ 382.231739] ? SyS_write+0x42/0x90 [ 382.231781] do_fast_syscall_32+0xd6/0x1a0 [ 382.231836] entry_SYSENTER_32+0x47/0x71 [ 382.231848] EIP: 0xb7f75b05 [ 382.231857] EFLAGS: 00000246 CPU: 1 [ 382.231868] EAX: ffffffda EBX: 00000400 ECX: bfd4508c EDX: bfd4510c [ 382.231878] ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: bfd45020 [ 382.231889] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b [ 382.232281] softirq: huh, entered softirq 9 RCU c10b4d90 with preempt_count 00000100, exited with 00000000? Tested-by: Sam Protsenko Signed-off-by: Vincent Pelletier Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_fs.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index dce9d12c7981..33e2030503fa 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -215,6 +215,7 @@ struct ffs_io_data { struct mm_struct *mm; struct work_struct work; + struct work_struct cancellation_work; struct usb_ep *ep; struct usb_request *req; @@ -1072,22 +1073,31 @@ ffs_epfile_open(struct inode *inode, struct file *file) return 0; } +static void ffs_aio_cancel_worker(struct work_struct *work) +{ + struct ffs_io_data *io_data = container_of(work, struct ffs_io_data, + cancellation_work); + + ENTER(); + + usb_ep_dequeue(io_data->ep, io_data->req); +} + static int ffs_aio_cancel(struct kiocb *kiocb) { struct ffs_io_data *io_data = kiocb->private; - struct ffs_epfile *epfile = kiocb->ki_filp->private_data; + struct ffs_data *ffs = io_data->ffs; int value; ENTER(); - spin_lock_irq(&epfile->ffs->eps_lock); - - if (likely(io_data && io_data->ep && io_data->req)) - value = usb_ep_dequeue(io_data->ep, io_data->req); - else + if (likely(io_data && io_data->ep && io_data->req)) { + INIT_WORK(&io_data->cancellation_work, ffs_aio_cancel_worker); + queue_work(ffs->io_completion_wq, &io_data->cancellation_work); + value = -EINPROGRESS; + } else { value = -EINVAL; - - spin_unlock_irq(&epfile->ffs->eps_lock); + } return value; } -- cgit v1.2.3 From 3ec148ebe3112b40c9a2c0c543bcb0cd1a3abd43 Mon Sep 17 00:00:00 2001 From: Jaejoong Kim Date: Thu, 14 Jun 2018 18:56:31 +0900 Subject: doc: usb: Fix typo in gadget_configfs documentation Fix the directory name from 'configfs' to 'configs'. Signed-off-by: Jaejoong Kim Signed-off-by: Felipe Balbi --- Documentation/usb/gadget_configfs.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/usb/gadget_configfs.txt b/Documentation/usb/gadget_configfs.txt index 635e57493709..b8cb38a98c19 100644 --- a/Documentation/usb/gadget_configfs.txt +++ b/Documentation/usb/gadget_configfs.txt @@ -226,7 +226,7 @@ $ rm configs/./ where . specify the configuration and is a symlink to a function being removed from the configuration, e.g.: -$ rm configfs/c.1/ncm.usb0 +$ rm configs/c.1/ncm.usb0 ... ... -- cgit v1.2.3 From 1ffba9058737af2ddeebc813faa8ea9b16bc892a Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Tue, 12 Jun 2018 12:37:29 +0400 Subject: usb: dwc2: gadget: Fix issue in dwc2_gadget_start_isoc() In case of requests queue is empty reset EP target_frame to initial value. This allow restarting ISOC traffic in case when function driver queued requests with interruptions. Tested-by: Zeng Tao Signed-off-by: Minas Harutyunyan Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index f0d9ccf1d665..bb499fea6100 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -884,6 +884,7 @@ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep) struct dwc2_dma_desc *desc; if (list_empty(&hs_ep->queue)) { + hs_ep->target_frame = TARGET_FRAME_INITIAL; dev_dbg(hsotg->dev, "%s: No requests in queue\n", __func__); return; } -- cgit v1.2.3 From 896e518883f18e601335908192e33426c1f599a4 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 31 May 2018 16:45:52 +0200 Subject: usb: dwc3: of-simple: fix use-after-free on remove The clocks have already been explicitly disabled and put as part of remove() so the runtime suspend callback must not be run when balancing the runtime PM usage count before returning. Fixes: 16adc674d0d6 ("usb: dwc3: add generic OF glue layer") Signed-off-by: Johan Hovold Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-of-simple.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index 6b3ccd542bd7..dbeff5e6ad14 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -165,8 +165,9 @@ static int dwc3_of_simple_remove(struct platform_device *pdev) reset_control_put(simple->resets); - pm_runtime_put_sync(dev); pm_runtime_disable(dev); + pm_runtime_put_noidle(dev); + pm_runtime_set_suspended(dev); return 0; } -- cgit v1.2.3 From 6e967d7e2c4822eba4847ec09037119a0418aaef Mon Sep 17 00:00:00 2001 From: Zeng Tao Date: Tue, 12 Jun 2018 22:49:06 +0800 Subject: usb: dwc2: gadget: fix packet drop issue in dwc2_gadget_handle_nak In ISOC transfer, when the NAK interrupt happens, we shouldn't complete a usb request, the current flow will complete one usb request with no hardware transfer, this will lead to a packet drop on the usb bus. Acked-by: Minas Harutyunyan Signed-off-by: Zeng Tao Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index bb499fea6100..bb5eb3c8132d 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -2818,9 +2818,6 @@ static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) tmp = dwc2_hsotg_read_frameno(hsotg); if (using_desc_dma(hsotg)) { - dwc2_hsotg_complete_request(hsotg, hs_ep, - get_ep_head(hs_ep), 0); - hs_ep->target_frame = tmp; dwc2_gadget_incr_frame_num(hs_ep); dwc2_gadget_start_isoc_ddma(hs_ep); -- cgit v1.2.3 From 615277779f41a753e68f531613e344c54fdc95bf Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 12 Jun 2018 10:24:48 +0200 Subject: usb: dwc3: Only call clk_bulk_get() on devicetree instantiated devices Commit fe8abf332b8f ("usb: dwc3: support clocks and resets for DWC3 core") adds support for handling clocks and resets in the DWC3 core, so that for platforms following the standard devicetree bindings this does not need to be duplicated in all the different glue layers. These changes intended for devicetree based platforms introduce an uncoditional clk_bulk_get() in the core probe path. This leads to the following error being logged on x86/ACPI systems: [ 26.276783] dwc3 dwc3.3.auto: Failed to get clk 'ref': -2 This commits wraps the clk_bulk_get() in an if (dev->of_node) check so that it only is done on devicetree instantiated devices, fixing this error. Cc: Masahiro Yamada Reviewed-by: Masahiro Yamada Signed-off-by: Hans de Goede Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index ea91310113b9..103807587dc6 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1272,7 +1272,6 @@ static int dwc3_probe(struct platform_device *pdev) if (!dwc->clks) return -ENOMEM; - dwc->num_clks = ARRAY_SIZE(dwc3_core_clks); dwc->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1307,15 +1306,19 @@ static int dwc3_probe(struct platform_device *pdev) if (IS_ERR(dwc->reset)) return PTR_ERR(dwc->reset); - ret = clk_bulk_get(dev, dwc->num_clks, dwc->clks); - if (ret == -EPROBE_DEFER) - return ret; - /* - * Clocks are optional, but new DT platforms should support all clocks - * as required by the DT-binding. - */ - if (ret) - dwc->num_clks = 0; + if (dev->of_node) { + dwc->num_clks = ARRAY_SIZE(dwc3_core_clks); + + ret = clk_bulk_get(dev, dwc->num_clks, dwc->clks); + if (ret == -EPROBE_DEFER) + return ret; + /* + * Clocks are optional, but new DT platforms should support all + * clocks as required by the DT-binding. + */ + if (ret) + dwc->num_clks = 0; + } ret = reset_control_deassert(dwc->reset); if (ret) -- cgit v1.2.3 From 21cbbc6bb7b4ba6aee303a3b4aef1578253724d8 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Tue, 12 Jun 2018 12:27:36 +0400 Subject: usb: dwc2: gadget: fix packet drop issue for ISOC OUT transfers In ISOC OUT transfer, when the OUT token received while EP disabled, we shouldn't complete a usb request. The current flow completed one usb request, this will lead to a packet drop to function driver. Signed-off-by: Minas Harutyunyan Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index bb5eb3c8132d..fa3b6f361074 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -2756,8 +2756,6 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) */ tmp = dwc2_hsotg_read_frameno(hsotg); - dwc2_hsotg_complete_request(hsotg, ep, get_ep_head(ep), 0); - if (using_desc_dma(hsotg)) { if (ep->target_frame == TARGET_FRAME_INITIAL) { /* Start first ISO Out */ -- cgit v1.2.3 From ba062ebb2cd561d404e0fba8ee4b3f5ebce7cbfc Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 13 Jun 2018 09:13:39 -0700 Subject: netfilter: nf_queue: augment nfqa_cfg_policy Three attributes are currently not verified, thus can trigger KMSAN warnings such as : BUG: KMSAN: uninit-value in __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline] BUG: KMSAN: uninit-value in __fswab32 include/uapi/linux/swab.h:59 [inline] BUG: KMSAN: uninit-value in nfqnl_recv_config+0x939/0x17d0 net/netfilter/nfnetlink_queue.c:1268 CPU: 1 PID: 4521 Comm: syz-executor120 Not tainted 4.17.0+ #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:113 kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1117 __msan_warning_32+0x70/0xc0 mm/kmsan/kmsan_instr.c:620 __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline] __fswab32 include/uapi/linux/swab.h:59 [inline] nfqnl_recv_config+0x939/0x17d0 net/netfilter/nfnetlink_queue.c:1268 nfnetlink_rcv_msg+0xb2e/0xc80 net/netfilter/nfnetlink.c:212 netlink_rcv_skb+0x37e/0x600 net/netlink/af_netlink.c:2448 nfnetlink_rcv+0x2fe/0x680 net/netfilter/nfnetlink.c:513 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1680/0x1750 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg net/socket.c:639 [inline] ___sys_sendmsg+0xec8/0x1320 net/socket.c:2117 __sys_sendmsg net/socket.c:2155 [inline] __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x43fd59 RSP: 002b:00007ffde0e30d28 EFLAGS: 00000213 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fd59 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000213 R12: 0000000000401680 R13: 0000000000401710 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan.c:322 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2753 [inline] __kmalloc_node_track_caller+0xb35/0x11b0 mm/slub.c:4395 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cb/0x9e0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:988 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline] netlink_sendmsg+0x76e/0x1350 net/netlink/af_netlink.c:1876 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg net/socket.c:639 [inline] ___sys_sendmsg+0xec8/0x1320 net/socket.c:2117 __sys_sendmsg net/socket.c:2155 [inline] __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: fdb694a01f1f ("netfilter: Add fail-open support") Fixes: 829e17a1a602 ("[NETFILTER]: nfnetlink_queue: allow changing queue length through netlink") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nfnetlink_queue.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c index 4ccd2988f9db..ea4ba551abb2 100644 --- a/net/netfilter/nfnetlink_queue.c +++ b/net/netfilter/nfnetlink_queue.c @@ -1243,6 +1243,9 @@ static int nfqnl_recv_unsupp(struct net *net, struct sock *ctnl, static const struct nla_policy nfqa_cfg_policy[NFQA_CFG_MAX+1] = { [NFQA_CFG_CMD] = { .len = sizeof(struct nfqnl_msg_config_cmd) }, [NFQA_CFG_PARAMS] = { .len = sizeof(struct nfqnl_msg_config_params) }, + [NFQA_CFG_QUEUE_MAXLEN] = { .type = NLA_U32 }, + [NFQA_CFG_MASK] = { .type = NLA_U32 }, + [NFQA_CFG_FLAGS] = { .type = NLA_U32 }, }; static const struct nf_queue_handler nfqh = { -- cgit v1.2.3 From 9ce7bc036ae4cfe3393232c86e9e1fea2153c237 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 13 Jun 2018 10:11:56 -0700 Subject: netfilter: ipv6: nf_defrag: reduce struct net memory waste It is a waste of memory to use a full "struct netns_sysctl_ipv6" while only one pointer is really used, considering netns_sysctl_ipv6 keeps growing. Also, since "struct netns_frags" has cache line alignment, it is better to move the frags_hdr pointer outside, otherwise we spend a full cache line for this pointer. This saves 192 bytes of memory per netns. Fixes: c038a767cd69 ("ipv6: add a new namespace for nf_conntrack_reasm") Signed-off-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso --- include/net/net_namespace.h | 1 + include/net/netns/ipv6.h | 1 - net/ipv6/netfilter/nf_conntrack_reasm.c | 6 +++--- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index 47e35cce3b64..a71264d75d7f 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -128,6 +128,7 @@ struct net { #endif #if IS_ENABLED(CONFIG_NF_DEFRAG_IPV6) struct netns_nf_frag nf_frag; + struct ctl_table_header *nf_frag_frags_hdr; #endif struct sock *nfnl; struct sock *nfnl_stash; diff --git a/include/net/netns/ipv6.h b/include/net/netns/ipv6.h index c978a31b0f84..762ac9931b62 100644 --- a/include/net/netns/ipv6.h +++ b/include/net/netns/ipv6.h @@ -109,7 +109,6 @@ struct netns_ipv6 { #if IS_ENABLED(CONFIG_NF_DEFRAG_IPV6) struct netns_nf_frag { - struct netns_sysctl_ipv6 sysctl; struct netns_frags frags; }; #endif diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index 5e0332014c17..a452d99c9f52 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -107,7 +107,7 @@ static int nf_ct_frag6_sysctl_register(struct net *net) if (hdr == NULL) goto err_reg; - net->nf_frag.sysctl.frags_hdr = hdr; + net->nf_frag_frags_hdr = hdr; return 0; err_reg: @@ -121,8 +121,8 @@ static void __net_exit nf_ct_frags6_sysctl_unregister(struct net *net) { struct ctl_table *table; - table = net->nf_frag.sysctl.frags_hdr->ctl_table_arg; - unregister_net_sysctl_table(net->nf_frag.sysctl.frags_hdr); + table = net->nf_frag_frags_hdr->ctl_table_arg; + unregister_net_sysctl_table(net->nf_frag_frags_hdr); if (!net_eq(net, &init_net)) kfree(table); } -- cgit v1.2.3 From ad9852af97587b8abe8102f9ddcb05c9769656f6 Mon Sep 17 00:00:00 2001 From: Gao Feng Date: Wed, 13 Jun 2018 12:26:13 +0800 Subject: netfilter: nf_ct_helper: Fix possible panic after nf_conntrack_helper_unregister The helper module would be unloaded after nf_conntrack_helper_unregister, so it may cause a possible panic caused by race. nf_ct_iterate_destroy(unhelp, me) reset the helper of conntrack as NULL, but maybe someone has gotten the helper pointer during this period. Then it would panic, when it accesses the helper and the module was unloaded. Take an example as following: CPU0 CPU1 ctnetlink_dump_helpinfo helper = rcu_dereference(help->helper); unhelp set helper as NULL unload helper module helper->to_nlattr(skb, ct); As above, the cpu0 tries to access the helper and its module is unloaded, then the panic happens. Signed-off-by: Gao Feng Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_helper.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c index 551a1eddf0fa..a75b11c39312 100644 --- a/net/netfilter/nf_conntrack_helper.c +++ b/net/netfilter/nf_conntrack_helper.c @@ -465,6 +465,11 @@ void nf_conntrack_helper_unregister(struct nf_conntrack_helper *me) nf_ct_expect_iterate_destroy(expect_iter_me, NULL); nf_ct_iterate_destroy(unhelp, me); + + /* Maybe someone has gotten the helper already when unhelp above. + * So need to wait it. + */ + synchronize_rcu(); } EXPORT_SYMBOL_GPL(nf_conntrack_helper_unregister); -- cgit v1.2.3 From 9f3cb9b71bc3166f27ceffe0b7295c464c638151 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 5 Jun 2018 09:22:37 -0700 Subject: MAINAINTERS: Corrected Broadcom Northstar2 entry While moving the Northstar 2 DTS into a dedicated directory, the corresponding MAINTAINERS file entry was not updated accordingly, fix that. Fixes: 63a913c157f5 ("arm64: dts: move ns2 into northstar2 directory") Signed-off-by: Florian Fainelli --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 9d5eeff51b5f..67b014ea81f2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2971,7 +2971,7 @@ N: bcm585* N: bcm586* N: bcm88312 N: hr2 -F: arch/arm64/boot/dts/broadcom/ns2* +F: arch/arm64/boot/dts/broadcom/northstar2/* F: drivers/clk/bcm/clk-ns* F: drivers/pinctrl/bcm/pinctrl-ns* -- cgit v1.2.3 From d64324acdb7052b08b13ffc8c12af232c6a29afd Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 5 Jun 2018 09:24:55 -0700 Subject: MAINTAINERS: Update Broadcom iProc entry with Stingray Update the MAINTAINERS file to cover the "stingray" pattern and a few files under arch/arm64/boot/dts/broadcom/* as well as the clock driver and binding. Signed-off-by: Florian Fainelli --- MAINTAINERS | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 67b014ea81f2..c78feb02a8c9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2971,9 +2971,13 @@ N: bcm585* N: bcm586* N: bcm88312 N: hr2 +N: stingray F: arch/arm64/boot/dts/broadcom/northstar2/* +F: arch/arm64/boot/dts/broadcom/stingray/* F: drivers/clk/bcm/clk-ns* +F: drivers/clk/bcm/clk-sr* F: drivers/pinctrl/bcm/pinctrl-ns* +F: include/dt-bindings/clock/bcm-sr* BROADCOM KONA GPIO DRIVER M: Ray Jui -- cgit v1.2.3 From a3e32e78a40017756c71ef6dad429ffe3301126a Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 11 Jun 2018 15:47:12 -0700 Subject: ARM: dts: NSP: Fix i2c controller interrupt type The i2c controller should use IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE. Fixes: 0f9f27a36d09 ("ARM: dts: NSP: Add I2C support to the DT") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-nsp.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index dcc55aa84583..c6aa62386941 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -391,7 +391,7 @@ reg = <0x38000 0x50>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; dma-coherent; status = "disabled"; -- cgit v1.2.3 From 403fde644855bc71318c8db65646383e22653b13 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 11 Jun 2018 15:47:13 -0700 Subject: ARM: dts: NSP: Fix PCIe controllers interrupt types The interrupts for the PCIe controllers should all be of type IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE. Fixes: d71eb9412088 ("ARM: dts: NSP: Add MSI support on PCI") Fixes: 522199029fdc ("ARM: dts: NSP: Fix PCIE DT issue") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-nsp.dtsi | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index c6aa62386941..09ba85046322 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -496,7 +496,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <0>; @@ -519,10 +519,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; brcm,pcie-msi-inten; }; }; @@ -533,7 +533,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <1>; @@ -556,10 +556,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; brcm,pcie-msi-inten; }; }; @@ -570,7 +570,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <2>; @@ -593,10 +593,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; brcm,pcie-msi-inten; }; }; -- cgit v1.2.3 From dbe4a39331b7aa8bcac8ef2da780724e1af1619a Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 11 Jun 2018 15:47:14 -0700 Subject: ARM: dts: HR2: Fix interrupt types for i2c and PCIe The i2c and PCIe controllers had an incorrect type which should have been set to IRQ_TYPE_LEVEL_HIGH, fix that. Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-hr2.dtsi | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi index 3f9cedd8011f..3084a7c95733 100644 --- a/arch/arm/boot/dts/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -264,7 +264,7 @@ reg = <0x38000 0x50>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; }; @@ -279,7 +279,7 @@ reg = <0x3b000 0x50>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; }; }; @@ -300,7 +300,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <0>; @@ -322,10 +322,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; brcm,pcie-msi-inten; }; }; @@ -336,7 +336,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <1>; @@ -358,10 +358,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; brcm,pcie-msi-inten; }; }; -- cgit v1.2.3 From a0a8338e905734518ab9b10b06e7fd0201228f8b Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 11 Jun 2018 15:53:40 -0700 Subject: ARM: dts: BCM5301x: Fix i2c controller interrupt type The i2c controller should be using IRQ_TYPE_LEVEL_HIGH, fix that. Fixes: bb097e3e0045 ("ARM: dts: BCM5301X: Add I2C support to the DT") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm5301x.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 9a076c409f4e..ef995e50ee12 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -365,7 +365,7 @@ i2c0: i2c@18009000 { compatible = "brcm,iproc-i2c"; reg = <0x18009000 0x50>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; -- cgit v1.2.3 From 71ca3409703b62b6a092d0d9d13f366c121bc5d3 Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Tue, 12 Jun 2018 13:21:27 -0700 Subject: ARM: dts: Cygnus: Fix I2C controller interrupt type Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom Cygnus SoC. Fixes: b51c05a331ff ("ARM: dts: add I2C device nodes for Broadcom Cygnus") Signed-off-by: Ray Jui Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-cygnus.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 9fe4f5a6379e..835a6f736da4 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -216,7 +216,7 @@ reg = <0x18008000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; status = "disabled"; }; @@ -245,7 +245,7 @@ reg = <0x1800b000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; status = "disabled"; }; -- cgit v1.2.3 From 6cb1628ad3506b315cdddd7676db0ff2af378d28 Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Tue, 12 Jun 2018 13:21:28 -0700 Subject: ARM: dts: Cygnus: Fix PCIe controller interrupt type Fix PCIe controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom Cygnus SoC Fixes: cd590b50a936 ("ARM: dts: enable PCIe support for Cygnus") Fixes: f6b889358a82 ("ARM: dts: Enable MSI support for Broadcom Cygnus") Signed-off-by: Ray Jui Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-cygnus.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 835a6f736da4..2c4df2d2d4a6 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -256,7 +256,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <0>; @@ -278,10 +278,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; }; }; @@ -291,7 +291,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <1>; @@ -313,10 +313,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; }; }; -- cgit v1.2.3 From eba92503e980c08ac353d0d669d0bb143979abcd Mon Sep 17 00:00:00 2001 From: Scott Branden Date: Fri, 18 May 2018 08:21:20 -0700 Subject: arm64: dts: specify 1.8V EMMC capabilities for bcm958742k Specify 1.8V EMMC capabilities for bcm958742k board to indicate support for UHS mode. Fixes: d4b4aba6be8a ("arm64: dts: Initial DTS files for Broadcom Stingray SOC") Signed-off-by: Scott Branden Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts index eb6f08cdbd79..77efa28c4dd5 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts @@ -43,6 +43,10 @@ enet-phy-lane-swap; }; +&sdio0 { + mmc-ddr-1_8v; +}; + &uart2 { status = "okay"; }; -- cgit v1.2.3 From 37c2bd81a86ebb1cc934bf52a29c33d6f9abff7f Mon Sep 17 00:00:00 2001 From: Scott Branden Date: Tue, 22 May 2018 10:01:39 -0700 Subject: arm64: dts: specify 1.8V EMMC capabilities for bcm958742t Specify 1.8V EMMC capabilities for bcm958742t board to indicate support for UHS mode. Fixes: d4b4aba6be8a ("arm64: dts: Initial DTS files for Broadcom Stingray SOC") Signed-off-by: Scott Branden Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts index 5084b037320f..55ba495ef56e 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts @@ -42,3 +42,7 @@ &gphy0 { enet-phy-lane-swap; }; + +&sdio0 { + mmc-ddr-1_8v; +}; -- cgit v1.2.3 From e605c287deed45624e8d35a15e3f0b4faab1a62d Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Tue, 12 Jun 2018 13:21:29 -0700 Subject: arm64: dts: ns2: Fix I2C controller interrupt type Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom NS2 SoC. Fixes: 7ac674e8df7a ("arm64: dts: Add I2C nodes for NS2") Signed-off-by: Ray Jui Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 4a2a6af8e752..c0e48966a5e2 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -566,7 +566,7 @@ reg = <0x66080000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; status = "disabled"; }; @@ -594,7 +594,7 @@ reg = <0x660b0000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; status = "disabled"; }; -- cgit v1.2.3 From d0b8aed9e80ab526dbb04020bfc94ecea7bddb44 Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Tue, 12 Jun 2018 13:21:30 -0700 Subject: arm64: dts: ns2: Fix PCIe controller interrupt type Fix PCIe controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom NS2 SoC. Fixes: fd5e5dd56a2f ("arm64: dts: Add PCIe0 and PCIe4 DT nodes for NS2") Signed-off-by: Ray Jui Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index c0e48966a5e2..4057197048dc 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -118,7 +118,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <0>; @@ -149,7 +149,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <4>; -- cgit v1.2.3 From bfc9dfdcb6e9493de5d4fe0d3ed3ce57672f8d07 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 13 Jun 2018 08:39:49 -0700 Subject: MD: cleanup resources in failure We need destroy the memory pool in failure Signed-off-by: Shaohua Li --- drivers/md/md.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 29b0cd9ec951..994aed2f9dff 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5547,7 +5547,8 @@ int md_run(struct mddev *mddev) else pr_warn("md: personality for level %s is not loaded!\n", mddev->clevel); - return -EINVAL; + err = -EINVAL; + goto abort; } spin_unlock(&pers_lock); if (mddev->level != pers->level) { @@ -5560,7 +5561,8 @@ int md_run(struct mddev *mddev) pers->start_reshape == NULL) { /* This personality cannot handle reshaping... */ module_put(pers->owner); - return -EINVAL; + err = -EINVAL; + goto abort; } if (pers->sync_request) { @@ -5629,7 +5631,7 @@ int md_run(struct mddev *mddev) mddev->private = NULL; module_put(pers->owner); bitmap_destroy(mddev); - return err; + goto abort; } if (mddev->queue) { bool nonrot = true; -- cgit v1.2.3 From 75af23c4736c5633894ea0baf9bca1cf6b248ca4 Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Tue, 12 Jun 2018 13:21:31 -0700 Subject: arm64: dts: Stingray: Fix I2C controller interrupt type Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom Stingray SoC. Fixes: 1256ea18875d ("arm64: dts: Add I2C DT nodes for Stingray SoC") Signed-off-by: Ray Jui Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 99aaff0b6d72..b203152ad67c 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -409,7 +409,7 @@ reg = <0x000b0000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; status = "disabled"; }; @@ -453,7 +453,7 @@ reg = <0x000e0000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; status = "disabled"; }; -- cgit v1.2.3 From a45fc268db20ecd859bb61e25045912b3194b5e6 Mon Sep 17 00:00:00 2001 From: Hoan Tran Date: Thu, 7 Jun 2018 14:35:01 +0100 Subject: drivers/perf: xgene_pmu: Fix IOB SLOW PMU parser error This patch fixes the below parser error of the IOB SLOW PMU. # perf stat -a -e iob-slow0/cycle-count/ sleep 1 evenf syntax error: 'iob-slow0/cycle-count/' \___ parser error It replaces the "-" character by "_" character inside the PMU name. Signed-off-by: Hoan Tran Signed-off-by: Will Deacon --- drivers/perf/xgene_pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/perf/xgene_pmu.c b/drivers/perf/xgene_pmu.c index 6bdb1dad805f..0e31f1392a53 100644 --- a/drivers/perf/xgene_pmu.c +++ b/drivers/perf/xgene_pmu.c @@ -1463,7 +1463,7 @@ static char *xgene_pmu_dev_name(struct device *dev, u32 type, int id) case PMU_TYPE_IOB: return devm_kasprintf(dev, GFP_KERNEL, "iob%d", id); case PMU_TYPE_IOB_SLOW: - return devm_kasprintf(dev, GFP_KERNEL, "iob-slow%d", id); + return devm_kasprintf(dev, GFP_KERNEL, "iob_slow%d", id); case PMU_TYPE_MCB: return devm_kasprintf(dev, GFP_KERNEL, "mcb%d", id); case PMU_TYPE_MC: -- cgit v1.2.3 From 109c4d18e57445afcaf728b8716a69375a3daab2 Mon Sep 17 00:00:00 2001 From: Ayan Kumar Halder Date: Fri, 20 Apr 2018 15:44:57 +0100 Subject: drm/arm/malidp: Ensure that the crtcs are shutdown before removing any encoder/connector One needs to ensure that the crtcs are shutdown so that the drm_crtc_state->connector_mask reflects that no connectors are currently active. Further, it reduces the reference count for each connector. This ensures that the connectors and encoders can be cleanly removed either when _unbind is called for the corresponding drivers or by drm_mode_config_cleanup(). We need drm_atomic_helper_shutdown() to be called before component_unbind_all() otherwise the connectors attached to the component device will have the wrong reference count value and will not be cleanly removed. Signed-off-by: Ayan Kumar Halder Acked-by: Liviu Dudau Signed-off-by: Liviu Dudau --- drivers/gpu/drm/arm/malidp_drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/arm/malidp_drv.c b/drivers/gpu/drm/arm/malidp_drv.c index 8d20faa198cf..0a788d76ed5f 100644 --- a/drivers/gpu/drm/arm/malidp_drv.c +++ b/drivers/gpu/drm/arm/malidp_drv.c @@ -278,7 +278,6 @@ static int malidp_init(struct drm_device *drm) static void malidp_fini(struct drm_device *drm) { - drm_atomic_helper_shutdown(drm); drm_mode_config_cleanup(drm); } @@ -646,6 +645,7 @@ vblank_fail: malidp_de_irq_fini(drm); drm->irq_enabled = false; irq_init_fail: + drm_atomic_helper_shutdown(drm); component_unbind_all(dev, drm); bind_fail: of_node_put(malidp->crtc.port); @@ -681,6 +681,7 @@ static void malidp_unbind(struct device *dev) malidp_se_irq_fini(drm); malidp_de_irq_fini(drm); drm->irq_enabled = false; + drm_atomic_helper_shutdown(drm); component_unbind_all(dev, drm); of_node_put(malidp->crtc.port); malidp->crtc.port = NULL; -- cgit v1.2.3 From 89610dc2c235e7b02bb9fba0ce247e12d4dde7cd Mon Sep 17 00:00:00 2001 From: Alison Wang Date: Tue, 24 Apr 2018 10:42:32 +0800 Subject: drm: mali-dp: Enable Global SE interrupts mask for DP500 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In the situation that DE and SE aren’t shared the same interrupt number, the Global SE interrupts mask bit MASK_IRQ_EN in MASKIRQ must be set, or else other mask bits will not work and no SE interrupt will occur. This patch enables MASK_IRQ_EN for SE to fix this problem. Signed-off-by: Alison Wang Acked-by: Liviu Dudau Signed-off-by: Liviu Dudau --- drivers/gpu/drm/arm/malidp_hw.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/arm/malidp_hw.c b/drivers/gpu/drm/arm/malidp_hw.c index d789b46dc817..069783e715f1 100644 --- a/drivers/gpu/drm/arm/malidp_hw.c +++ b/drivers/gpu/drm/arm/malidp_hw.c @@ -634,7 +634,8 @@ const struct malidp_hw malidp_device[MALIDP_MAX_DEVICES] = { .vsync_irq = MALIDP500_DE_IRQ_VSYNC, }, .se_irq_map = { - .irq_mask = MALIDP500_SE_IRQ_CONF_MODE, + .irq_mask = MALIDP500_SE_IRQ_CONF_MODE | + MALIDP500_SE_IRQ_GLOBAL, .vsync_irq = 0, }, .dc_irq_map = { -- cgit v1.2.3 From ad7fda2e378f4356df621a39655f7c200b495d81 Mon Sep 17 00:00:00 2001 From: Ayan Kumar Halder Date: Tue, 10 Apr 2018 19:25:03 +0100 Subject: drm/arm/malidp: Preserve LAYER_FORMAT contents when setting format On some Mali-DP processors, the LAYER_FORMAT register contains fields other than the format. These bits were unconditionally cleared when setting the pixel format, whereas they should be preserved at their reset values. Reported-by: Brian Starkey Reported-by: Liviu Dudau Signed-off-by: Ayan Kumar halder Acked-by: Liviu Dudau Signed-off-by: Liviu Dudau --- drivers/gpu/drm/arm/malidp_planes.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c index 7a44897c50fe..4af3c1fabb23 100644 --- a/drivers/gpu/drm/arm/malidp_planes.c +++ b/drivers/gpu/drm/arm/malidp_planes.c @@ -23,6 +23,7 @@ /* Layer specific register offsets */ #define MALIDP_LAYER_FORMAT 0x000 +#define LAYER_FORMAT_MASK 0x3f #define MALIDP_LAYER_CONTROL 0x004 #define LAYER_ENABLE (1 << 0) #define LAYER_FLOWCFG_MASK 7 @@ -337,7 +338,9 @@ static void malidp_de_plane_update(struct drm_plane *plane, dest_w = plane->state->crtc_w; dest_h = plane->state->crtc_h; - malidp_hw_write(mp->hwdev, ms->format, mp->layer->base); + val = malidp_hw_read(mp->hwdev, mp->layer->base); + val = (val & ~LAYER_FORMAT_MASK) | ms->format; + malidp_hw_write(mp->hwdev, val, mp->layer->base); for (i = 0; i < ms->n_planes; i++) { /* calculate the offset for the layer's plane registers */ -- cgit v1.2.3 From c6cf387ec56c19028333274747bbb4ae145a2d13 Mon Sep 17 00:00:00 2001 From: Ayan Kumar Halder Date: Mon, 18 Jun 2018 18:08:43 +0100 Subject: drm/mali-dp: Rectify the width and height passed to rotmem_required() The width and height needs to be swapped Signed-off-by: Ayan Kumar halder Reviewed-by: Brian Starkey Reviewed-by: Alexandru Gheorghe Acked-by: Liviu Dudau [rebased on top of v4.18-rc1] Signed-off-by: Liviu Dudau --- drivers/gpu/drm/arm/malidp_planes.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c index 4af3c1fabb23..29409a65d864 100644 --- a/drivers/gpu/drm/arm/malidp_planes.c +++ b/drivers/gpu/drm/arm/malidp_planes.c @@ -236,8 +236,8 @@ static int malidp_de_plane_check(struct drm_plane *plane, if (state->rotation & MALIDP_ROTATED_MASK) { int val; - val = mp->hwdev->hw->rotmem_required(mp->hwdev, state->crtc_h, - state->crtc_w, + val = mp->hwdev->hw->rotmem_required(mp->hwdev, state->crtc_w, + state->crtc_h, fb->format->format); if (val < 0) return val; -- cgit v1.2.3 From fae2a63737e5973f1426bc139935a0f42e232844 Mon Sep 17 00:00:00 2001 From: John Garry Date: Fri, 8 Jun 2018 18:26:33 +0800 Subject: libahci: Fix possible Spectre-v1 pmp indexing in ahci_led_store() Currently smatch warns of possible Spectre-V1 issue in ahci_led_store(): drivers/ata/libahci.c:1150 ahci_led_store() warn: potential spectre issue 'pp->em_priv' (local cap) Userspace controls @pmp from following callchain: em_message->store() ->ata_scsi_em_message_store() -->ap->ops->em_store() --->ahci_led_store() After the mask+shift @pmp is effectively an 8b value, which is used to index into an array of length 8, so sanitize the array index. Signed-off-by: John Garry Signed-off-by: Tejun Heo --- drivers/ata/libahci.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 965842a08743..09620c2ffa0f 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include #include @@ -1146,10 +1147,12 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, /* get the slot number from the message */ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; - if (pmp < EM_MAX_SLOTS) + if (pmp < EM_MAX_SLOTS) { + pmp = array_index_nospec(pmp, EM_MAX_SLOTS); emp = &pp->em_priv[pmp]; - else + } else { return -EINVAL; + } /* mask off the activity bits if we are in sw_activity * mode, user should turn off sw_activity before setting -- cgit v1.2.3 From 95ffcf471d05ec7c91993c91dea912f99dccfc26 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 6 Jun 2018 06:56:34 +0000 Subject: ata: ahci_mvebu: ahci_mvebu_stop_engine() can be static Fixes the following sparse warning: drivers/ata/ahci_mvebu.c:85:5: warning: symbol 'ahci_mvebu_stop_engine' was not declared. Should it be static? Signed-off-by: Wei Yongjun Signed-off-by: Tejun Heo --- drivers/ata/ahci_mvebu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c index 0045dacd814b..72d90b4c3aae 100644 --- a/drivers/ata/ahci_mvebu.c +++ b/drivers/ata/ahci_mvebu.c @@ -82,7 +82,7 @@ static void ahci_mvebu_regret_option(struct ahci_host_priv *hpriv) * * Return: 0 on success; Error code otherwise. */ -int ahci_mvebu_stop_engine(struct ata_port *ap) +static int ahci_mvebu_stop_engine(struct ata_port *ap) { void __iomem *port_mmio = ahci_port_base(ap); u32 tmp, port_fbs; -- cgit v1.2.3 From 08ca1b52f69b4dfa8703d54e26e2c6e11aa453eb Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Mon, 18 Jun 2018 16:39:50 -0600 Subject: vfio/pci: Make IGD support a configurable option Allow the code which provides extensions to support direct assignment of Intel IGD (GVT-d) to be compiled out of the kernel if desired. The config option for this was previously automatically enabled on X86, therefore the default remains Y. This simply provides the option to disable it even for X86. Signed-off-by: Alex Williamson --- drivers/vfio/pci/Kconfig | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/vfio/pci/Kconfig b/drivers/vfio/pci/Kconfig index 24ee2605b9f0..42dc1d3d71cf 100644 --- a/drivers/vfio/pci/Kconfig +++ b/drivers/vfio/pci/Kconfig @@ -28,5 +28,13 @@ config VFIO_PCI_INTX def_bool y if !S390 config VFIO_PCI_IGD - depends on VFIO_PCI - def_bool y if X86 + bool "VFIO PCI extensions for Intel graphics (GVT-d)" + depends on VFIO_PCI && X86 + default y + help + Support for Intel IGD specific extensions to enable direct + assignment to virtual machines. This includes exposing an IGD + specific firmware table and read-only copies of the host bridge + and LPC bridge config space. + + To enable Intel IGD assignment through vfio-pci, say Y. -- cgit v1.2.3 From 6c3796d130ed2860489885a934dcb7bb334d5eb0 Mon Sep 17 00:00:00 2001 From: "bstroesser@ts.fujitsu.com" Date: Thu, 24 May 2018 18:49:41 +0200 Subject: scsi: target: tcmu: add read length support Generally target core and TCMUser seem to work fine for tape devices and media changers. But there is at least one situation where TCMUser is not able to support sequential access device emulation correctly. The situation is when an initiator sends a SCSI READ CDB with a length that is greater than the length of the tape block to read. We can distinguish two subcases: A) The initiator sent the READ CDB with the SILI bit being set. In this case the sequential access device has to transfer the data from the tape block (only the length of the tape block) and transmit a good status. The current interface between TCMUser and the userspace does not support reduction of the read data size by the userspace program. The patch below fixes this subcase by allowing the userspace program to specify a reduced data size in read direction. B) The initiator sent the READ CDB with the SILI bit not being set. In this case the sequential access device has to transfer the data from the tape block as in A), but additionally has to transmit CHECK CONDITION with the ILI bit set and NO SENSE in the sensebytes. The information field in the sensebytes must contain the residual count. With the below patch a user space program can specify the real read data length and appropriate sensebytes. TCMUser then uses the se_cmd flag SCF_TREAT_READ_AS_NORMAL, to force target core to transmit the real data size and the sensebytes. Note: the flag SCF_TREAT_READ_AS_NORMAL is introduced by Lee Duncan's patch "[PATCH v4] target: transport should handle st FM/EOM/ILI reads" from Tue, 15 May 2018 18:25:24 -0700. Signed-off-by: Bodo Stroesser Acked-by: Mike Christie Reviewed-by: Lee Duncan Signed-off-by: Martin K. Petersen --- drivers/target/target_core_user.c | 44 ++++++++++++++++++++++++++++------- include/uapi/linux/target_core_user.h | 4 +++- 2 files changed, 39 insertions(+), 9 deletions(-) diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index 7f96dfa32b9c..d8dc3d22051f 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -656,7 +656,7 @@ static void scatter_data_area(struct tcmu_dev *udev, } static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd, - bool bidi) + bool bidi, uint32_t read_len) { struct se_cmd *se_cmd = cmd->se_cmd; int i, dbi; @@ -689,7 +689,7 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd, for_each_sg(data_sg, sg, data_nents, i) { int sg_remaining = sg->length; to = kmap_atomic(sg_page(sg)) + sg->offset; - while (sg_remaining > 0) { + while (sg_remaining > 0 && read_len > 0) { if (block_remaining == 0) { if (from) kunmap_atomic(from); @@ -701,6 +701,8 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd, } copy_bytes = min_t(size_t, sg_remaining, block_remaining); + if (read_len < copy_bytes) + copy_bytes = read_len; offset = DATA_BLOCK_SIZE - block_remaining; tcmu_flush_dcache_range(from, copy_bytes); memcpy(to + sg->length - sg_remaining, from + offset, @@ -708,8 +710,11 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd, sg_remaining -= copy_bytes; block_remaining -= copy_bytes; + read_len -= copy_bytes; } kunmap_atomic(to - sg->offset); + if (read_len == 0) + break; } if (from) kunmap_atomic(from); @@ -1042,6 +1047,8 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry * { struct se_cmd *se_cmd = cmd->se_cmd; struct tcmu_dev *udev = cmd->tcmu_dev; + bool read_len_valid = false; + uint32_t read_len = se_cmd->data_length; /* * cmd has been completed already from timeout, just reclaim @@ -1056,13 +1063,28 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry * pr_warn("TCMU: Userspace set UNKNOWN_OP flag on se_cmd %p\n", cmd->se_cmd); entry->rsp.scsi_status = SAM_STAT_CHECK_CONDITION; - } else if (entry->rsp.scsi_status == SAM_STAT_CHECK_CONDITION) { + goto done; + } + + if (se_cmd->data_direction == DMA_FROM_DEVICE && + (entry->hdr.uflags & TCMU_UFLAG_READ_LEN) && entry->rsp.read_len) { + read_len_valid = true; + if (entry->rsp.read_len < read_len) + read_len = entry->rsp.read_len; + } + + if (entry->rsp.scsi_status == SAM_STAT_CHECK_CONDITION) { transport_copy_sense_to_cmd(se_cmd, entry->rsp.sense_buffer); - } else if (se_cmd->se_cmd_flags & SCF_BIDI) { + if (!read_len_valid ) + goto done; + else + se_cmd->se_cmd_flags |= SCF_TREAT_READ_AS_NORMAL; + } + if (se_cmd->se_cmd_flags & SCF_BIDI) { /* Get Data-In buffer before clean up */ - gather_data_area(udev, cmd, true); + gather_data_area(udev, cmd, true, read_len); } else if (se_cmd->data_direction == DMA_FROM_DEVICE) { - gather_data_area(udev, cmd, false); + gather_data_area(udev, cmd, false, read_len); } else if (se_cmd->data_direction == DMA_TO_DEVICE) { /* TODO: */ } else if (se_cmd->data_direction != DMA_NONE) { @@ -1070,7 +1092,13 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry * se_cmd->data_direction); } - target_complete_cmd(cmd->se_cmd, entry->rsp.scsi_status); +done: + if (read_len_valid) { + pr_debug("read_len = %d\n", read_len); + target_complete_cmd_with_length(cmd->se_cmd, + entry->rsp.scsi_status, read_len); + } else + target_complete_cmd(cmd->se_cmd, entry->rsp.scsi_status); out: cmd->se_cmd = NULL; @@ -1740,7 +1768,7 @@ static int tcmu_configure_device(struct se_device *dev) /* Initialise the mailbox of the ring buffer */ mb = udev->mb_addr; mb->version = TCMU_MAILBOX_VERSION; - mb->flags = TCMU_MAILBOX_FLAG_CAP_OOOC; + mb->flags = TCMU_MAILBOX_FLAG_CAP_OOOC | TCMU_MAILBOX_FLAG_CAP_READ_LEN; mb->cmdr_off = CMDR_OFF; mb->cmdr_size = udev->cmdr_size; diff --git a/include/uapi/linux/target_core_user.h b/include/uapi/linux/target_core_user.h index 6e299349b158..b7b57967d90f 100644 --- a/include/uapi/linux/target_core_user.h +++ b/include/uapi/linux/target_core_user.h @@ -44,6 +44,7 @@ #define TCMU_MAILBOX_VERSION 2 #define ALIGN_SIZE 64 /* Should be enough for most CPUs */ #define TCMU_MAILBOX_FLAG_CAP_OOOC (1 << 0) /* Out-of-order completions */ +#define TCMU_MAILBOX_FLAG_CAP_READ_LEN (1 << 1) /* Read data length */ struct tcmu_mailbox { __u16 version; @@ -71,6 +72,7 @@ struct tcmu_cmd_entry_hdr { __u16 cmd_id; __u8 kflags; #define TCMU_UFLAG_UNKNOWN_OP 0x1 +#define TCMU_UFLAG_READ_LEN 0x2 __u8 uflags; } __packed; @@ -119,7 +121,7 @@ struct tcmu_cmd_entry { __u8 scsi_status; __u8 __pad1; __u16 __pad2; - __u32 __pad3; + __u32 read_len; char sense_buffer[TCMU_SENSE_BUFFERSIZE]; } rsp; }; -- cgit v1.2.3 From f2233a33dc1fef4aa30dc11e4c676637bf358c3d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 19 Mar 2018 22:50:05 -0400 Subject: scsi: ipr: Eliminate duplicate barriers Driver does both wmb() and writel(). The latter already has a barrier on some architectures like arm64. This ends up with CPU observing two barriers back to back before executing the register write. Drivers should generally assume that the barrier implied by writel() is sufficient for ordering DMA. Remove the extraneous wmb() before it. [mkp: Squashed Arnd's and Sinan's patches] Signed-off-by: Arnd Bergmann Reported-by: Sinan Kaya Acked-by: Brian King Signed-off-by: Martin K. Petersen --- drivers/scsi/ipr.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 0a9b8b387bd2..02d65dce74e5 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -760,7 +760,6 @@ static void ipr_mask_and_clear_interrupts(struct ipr_ioa_cfg *ioa_cfg, ioa_cfg->hrrq[i].allow_interrupts = 0; spin_unlock(&ioa_cfg->hrrq[i]._lock); } - wmb(); /* Set interrupt mask to stop all new interrupts */ if (ioa_cfg->sis64) @@ -8403,7 +8402,6 @@ static int ipr_reset_enable_ioa(struct ipr_cmnd *ipr_cmd) ioa_cfg->hrrq[i].allow_interrupts = 1; spin_unlock(&ioa_cfg->hrrq[i]._lock); } - wmb(); if (ioa_cfg->sis64) { /* Set the adapter to the correct endian mode. */ writel(IPR_ENDIAN_SWAP_KEY, ioa_cfg->regs.endian_swap_reg); -- cgit v1.2.3 From 49d7bd36813ea8e6b4c97b640d24e7fbd44c84f0 Mon Sep 17 00:00:00 2001 From: Mikhail Malygin Date: Wed, 13 Jun 2018 13:05:57 +0000 Subject: scsi: qla2xxx: Spinlock recursion in qla_target The patch reverts changes done in qlt_schedule_sess_for_deletion() to avoid spinlock recursion sess->vha->work_lock should be used instead of ha->tgt.sess_lock, that can be locked in callers: qlt_reset() or qlt_handle_login() [mkp: roll in build warning reported by sfr] Fixes: 1c6cacf4ea6c04 ("scsi: qla2xxx: Fixup locking for session deletion") Cc: #v4.17 Signed-off-by: Mikhail Malygin Reported-by: Mikhail Malygin Tested-by: Mikhail Malygin Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_target.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 0fea2e2326be..1027b0cb7fa3 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -1224,7 +1224,6 @@ static void qla24xx_chk_fcp_state(struct fc_port *sess) void qlt_schedule_sess_for_deletion(struct fc_port *sess) { struct qla_tgt *tgt = sess->tgt; - struct qla_hw_data *ha = sess->vha->hw; unsigned long flags; if (sess->disc_state == DSC_DELETE_PEND) @@ -1241,16 +1240,16 @@ void qlt_schedule_sess_for_deletion(struct fc_port *sess) return; } - spin_lock_irqsave(&ha->tgt.sess_lock, flags); if (sess->deleted == QLA_SESS_DELETED) sess->logout_on_delete = 0; + spin_lock_irqsave(&sess->vha->work_lock, flags); if (sess->deleted == QLA_SESS_DELETION_IN_PROGRESS) { - spin_unlock_irqrestore(&ha->tgt.sess_lock, flags); + spin_unlock_irqrestore(&sess->vha->work_lock, flags); return; } sess->deleted = QLA_SESS_DELETION_IN_PROGRESS; - spin_unlock_irqrestore(&ha->tgt.sess_lock, flags); + spin_unlock_irqrestore(&sess->vha->work_lock, flags); sess->disc_state = DSC_DELETE_PEND; -- cgit v1.2.3 From 52ab9768f723823a71dc659f0fad803a90f80236 Mon Sep 17 00:00:00 2001 From: Luis Henriques Date: Mon, 18 Jun 2018 17:08:03 +0100 Subject: scsi: scsi_debug: Fix memory leak on module unload Since commit 80c49563e250 ("scsi: scsi_debug: implement IMMED bit") there are long delays in F_SYNC_DELAY and F_SSU_DELAY. This can cause a memory leak in schedule_resp(), which can be invoked while unloading the scsi_debug module: free_all_queued() had already freed all sd_dp and schedule_resp will alloc a new one, which will never get freed. Here's the kmemleak report while running xfstests generic/350: unreferenced object 0xffff88007d752b00 (size 128): comm "rmmod", pid 26940, jiffies 4295816945 (age 7.588s) hex dump (first 32 bytes): 00 2b 75 7d 00 88 ff ff 00 00 00 00 00 00 00 00 .+u}............ 00 00 00 00 00 00 00 00 8e 31 a2 34 5f 03 00 00 .........1.4_... backtrace: [<000000002abd83d0>] 0xffffffffa000705e [<000000004c063fda>] scsi_dispatch_cmd+0xc7/0x1a0 [<000000000c119a00>] scsi_request_fn+0x251/0x550 [<000000009de0c736>] __blk_run_queue+0x3f/0x60 [<000000001c4453c8>] blk_execute_rq_nowait+0x98/0xd0 [<00000000d17ec79f>] blk_execute_rq+0x3a/0x50 [<00000000a7654b6e>] scsi_execute+0x113/0x250 [<00000000fd78f7cd>] sd_sync_cache+0x95/0x160 [<0000000024dacb14>] sd_shutdown+0x9b/0xd0 [<00000000e9101710>] sd_remove+0x5f/0xb0 [<00000000c43f0d63>] device_release_driver_internal+0x13c/0x1f0 [<00000000e8ad57b6>] bus_remove_device+0xe9/0x160 [<00000000713a7b8a>] device_del+0x120/0x320 [<00000000e5db670c>] __scsi_remove_device+0x115/0x150 [<00000000eccbef30>] scsi_forget_host+0x20/0x60 [<00000000cd5a0738>] scsi_remove_host+0x6d/0x120 Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Luis Henriques Acked-by: Douglas Gilbert Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 24d7496cd9e2..364e71861bfd 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -5507,9 +5507,9 @@ static void __exit scsi_debug_exit(void) int k = sdebug_add_host; stop_all_queued(); - free_all_queued(); for (; k; k--) sdebug_remove_adapter(); + free_all_queued(); driver_unregister(&sdebug_driverfs_driver); bus_unregister(&pseudo_lld_bus); root_device_unregister(pseudo_primary); -- cgit v1.2.3 From c9bd0946da243a8eb86b44ff613e2c813f9b683b Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 5 Jun 2018 18:59:57 +0200 Subject: dmaengine: ti: omap-dma: Fix OMAP1510 incorrect residue_granularity Commit 0198d7bb8a0c ("ASoC: omap-mcbsp: Convert to use the sdma-pcm instead of omap-pcm") resulted in broken audio playback on OMAP1510 (discovered on Amstrad Delta). When running on OMAP1510, omap-pcm used to obtain DMA offset from snd_dmaengine_pcm_pointer_no_residue() based on DMA interrupt triggered software calculations instead of snd_dmaengine_pcm_pointer() which depended on residue value calculated from omap_dma_get_src_pos(). Similar code path is still available in now used sound/soc/soc-generic-dmaengine-pcm.c but it is not triggered. It was verified already before that omap_get_dma_src_pos() from arch/arm/plat-omap/dma.c didn't work correctly for OMAP1510 - see commit 1bdd7419910c ("ASoC: OMAP: fix OMAP1510 broken PCM pointer callback") for details. Apparently the same applies to its successor, omap_dma_get_src_pos() from drivers/dma/ti/omap-dma.c. On the other hand, snd_dmaengine_pcm_pointer_no_residue() is described as depreciated and discouraged for use in new drivers because of its unreliable accuracy. However, it seems the only working option for OPAM1510 now, as long as a software calculated residue is not implemented as OMAP1510 fallback in omap-dma. Using snd_dmaengine_pcm_pointer_no_residue() code path instead of snd_dmaengine_pcm_pointer() in sound/soc/soc-generic-dmaengine-pcm.c can be triggered in two ways: - by passing pcm->flags |= SND_DMAENGINE_PCM_FLAG_NO_RESIDUE from sound/soc/omap/sdma-pcm.c, - by passing dma_caps.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR from DMA engine. Let's do the latter. Signed-off-by: Janusz Krzysztofik Acked-by: Peter Ujfalusi Signed-off-by: Vinod Koul --- drivers/dma/ti/omap-dma.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/dma/ti/omap-dma.c b/drivers/dma/ti/omap-dma.c index 9b5ca8691f27..a4a931ddf6f6 100644 --- a/drivers/dma/ti/omap-dma.c +++ b/drivers/dma/ti/omap-dma.c @@ -1485,7 +1485,11 @@ static int omap_dma_probe(struct platform_device *pdev) od->ddev.src_addr_widths = OMAP_DMA_BUSWIDTHS; od->ddev.dst_addr_widths = OMAP_DMA_BUSWIDTHS; od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); - od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; + if (__dma_omap15xx(od->plat->dma_attr)) + od->ddev.residue_granularity = + DMA_RESIDUE_GRANULARITY_DESCRIPTOR; + else + od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; od->ddev.max_burst = SZ_16M - 1; /* CCEN: 24bit unsigned */ od->ddev.dev = &pdev->dev; INIT_LIST_HEAD(&od->ddev.channels); -- cgit v1.2.3 From 356073bcf6dbcc15cd8fb22d10cf8f35f4525271 Mon Sep 17 00:00:00 2001 From: Sinan Kaya Date: Thu, 14 Jun 2018 09:37:46 -0400 Subject: MAINTAINERS: Update email-id of Sinan Kaya I'm no longer with QCOM. I am still interested in maintaining or reviewing PCI/DMA engine patches. Update email-id to an active one. Signed-off-by: Sinan Kaya Signed-off-by: Vinod Koul --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 9d5eeff51b5f..209ddcdc5b7a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11821,7 +11821,7 @@ S: Supported F: arch/hexagon/ QUALCOMM HIDMA DRIVER -M: Sinan Kaya +M: Sinan Kaya L: linux-arm-kernel@lists.infradead.org L: linux-arm-msm@vger.kernel.org L: dmaengine@vger.kernel.org -- cgit v1.2.3 From 1bcfe0564044be578841744faea1c2f46adc8178 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Fri, 15 Jun 2018 09:41:29 +0200 Subject: ARM: dts: imx6sx: fix irq for pcie bridge Use the correct IRQ line for the MSI controller in the PCIe host controller. Apparently a different IRQ line is used compared to other i.MX6 variants. Without this change MSI IRQs aren't properly propagated to the upstream interrupt controller. Signed-off-by: Oleksij Rempel Reviewed-by: Lucas Stach Fixes: b1d17f68e5c5 ("ARM: dts: imx: add initial imx6sx device tree source") Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index d8b94f47498b..4e4a55aad5c9 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -1344,7 +1344,7 @@ ranges = <0x81000000 0 0 0x08f80000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; - interrupts = ; + interrupts = ; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; -- cgit v1.2.3 From 97d1e3dc8d98f97b65350f8ab221e6d061705abc Mon Sep 17 00:00:00 2001 From: Luc Van Oostenryck Date: Mon, 28 May 2018 18:29:02 +0200 Subject: nds32: define __NDS32_E[BL]__ for sparse nds32 depends on the macros '__NDS32_E[BL]__' to correctly select or define endian-specific macros, structures or pieces of code. These macros are predefined by the compiler but sparse knows nothing about them and thus may pre-process files differently from what GCC would. Fix this by adding '-D__NDS32_E[BL]__' to CHECKFLAGS. Signed-off-by: Luc Van Oostenryck Acked-by: Greentime Hu Signed-off-by: Greentime Hu --- arch/nds32/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/nds32/Makefile b/arch/nds32/Makefile index 513bb2e9baf9..031c676821ff 100644 --- a/arch/nds32/Makefile +++ b/arch/nds32/Makefile @@ -34,10 +34,12 @@ ifdef CONFIG_CPU_LITTLE_ENDIAN KBUILD_CFLAGS += $(call cc-option, -EL) KBUILD_AFLAGS += $(call cc-option, -EL) LDFLAGS += $(call cc-option, -EL) +CHECKFLAGS += -D__NDS32_EL__ else KBUILD_CFLAGS += $(call cc-option, -EB) KBUILD_AFLAGS += $(call cc-option, -EB) LDFLAGS += $(call cc-option, -EB) +CHECKFLAGS += -D__NDS32_EB__ endif boot := arch/nds32/boot -- cgit v1.2.3 From a78945c357f58665d6a5da8a69e085898e831c70 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 14 Jun 2018 15:28:52 +0100 Subject: nds32: Fix build error caused by configuration flag rename Fix build error on nds32 due to the merge of commit e3d5980568f ("lib: Rename compiler intrinsic selects to GENERIC_LIB_*") during the 4.18 merge window which renames Kconfig symbols. This had raced with commit aeaa7af744fa ("nds32: lib: To use generic lib instead of libgcc to prevent the symbol undefined issue.") merged late in the 4.17 cycle, which added selects to nds32 using the original Kconfig symbol names. When they came together in merge commit 763f96944c95 ("Merge tag 'mips_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux") this resulted in the following build errors: nds32le-linux-ld: kernel/time/timekeeping.o: in function `timekeeping_init': timekeeping.c:(.init.text+0x140): undefined reference to `__ashldi3' nds32le-linux-ld: timekeeping.c:(.init.text+0x144): undefined reference to `__ashldi3' nds32le-linux-ld: timekeeping.c:(.init.text+0x17e): undefined reference to `__lshrdi3' nds32le-linux-ld: timekeeping.c:(.init.text+0x182): undefined reference to `__lshrdi3' nds32le-linux-ld: drivers/clocksource/mmio.o: in function `clocksource_mmio_init': mmio.c:(.init.text+0x54): undefined reference to `__lshrdi3' nds32le-linux-ld: mmio.c:(.init.text+0x58): undefined reference to `__lshrdi3' Rename all 6 selects in nds32 and adjust the ordering accordingly to be alphabetical. Fixes: 763f96944c95 ("Merge tag 'mips_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux") Signed-off-by: Guenter Roeck [jhogan@kernel.org: Rename all 6 symbols, sort, update commit message] Signed-off-by: James Hogan Cc: Greentime Hu Cc: Vincent Chen Cc: Matt Redfearn Cc: Palmer Dabbelt Acked-by: Greentime Hu Signed-off-by: Greentime Hu --- arch/nds32/Kconfig | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/nds32/Kconfig b/arch/nds32/Kconfig index 6aed974276d8..34f7222c5efe 100644 --- a/arch/nds32/Kconfig +++ b/arch/nds32/Kconfig @@ -12,17 +12,17 @@ config NDS32 select CLONE_BACKWARDS select COMMON_CLK select DMA_NONCOHERENT_OPS - select GENERIC_ASHLDI3 - select GENERIC_ASHRDI3 - select GENERIC_LSHRDI3 - select GENERIC_CMPDI2 - select GENERIC_MULDI3 - select GENERIC_UCMPDI2 select GENERIC_ATOMIC64 select GENERIC_CPU_DEVICES select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select GENERIC_IRQ_SHOW + select GENERIC_LIB_ASHLDI3 + select GENERIC_LIB_ASHRDI3 + select GENERIC_LIB_CMPDI2 + select GENERIC_LIB_LSHRDI3 + select GENERIC_LIB_MULDI3 + select GENERIC_LIB_UCMPDI2 select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select GENERIC_TIME_VSYSCALL -- cgit v1.2.3 From 12baf7721143c83150fa973484b7b5fcd86b23f0 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Tue, 19 Jun 2018 17:31:24 +1200 Subject: mtd: rawnand: micron: add ONFI_FEATURE_ON_DIE_ECC to supported features Add ONFI_FEATURE_ON_DIE_ECC to the set/get features list for Micron NAND flash. Fixes: 789157e41a06 ("mtd: rawnand: allow vendors to declare (un)supported features") Cc: Signed-off-by: Chris Packham Reviewed-by: Miquel Raynal Signed-off-by: Boris Brezillon --- drivers/mtd/nand/raw/nand_micron.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c index 0af45b134c0c..5ec4c90a637d 100644 --- a/drivers/mtd/nand/raw/nand_micron.c +++ b/drivers/mtd/nand/raw/nand_micron.c @@ -66,7 +66,9 @@ static int micron_nand_onfi_init(struct nand_chip *chip) if (p->supports_set_get_features) { set_bit(ONFI_FEATURE_ADDR_READ_RETRY, p->set_feature_list); + set_bit(ONFI_FEATURE_ON_DIE_ECC, p->set_feature_list); set_bit(ONFI_FEATURE_ADDR_READ_RETRY, p->get_feature_list); + set_bit(ONFI_FEATURE_ON_DIE_ECC, p->get_feature_list); } return 0; -- cgit v1.2.3 From 93ef2dc0c4f7acf4253882a03c11f2ca8e41f387 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 6 Jun 2018 14:22:24 +0000 Subject: usb: dwc3: Fix error return code in dwc3_qcom_probe() Fix to return error code -ENODEV from the get device failed error handling case instead of 0, as done elsewhere in this function. Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-qcom.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index b0e67ab2f98c..8854e428ae08 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -490,6 +490,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev) qcom->dwc3 = of_find_device_by_node(dwc3_np); if (!qcom->dwc3) { dev_err(&pdev->dev, "failed to get dwc3 platform device\n"); + ret = -ENODEV; goto depopulate; } -- cgit v1.2.3 From 9925e6ebe5c2da9601037cca73462782900b9190 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 25 May 2018 18:06:20 +0200 Subject: usb: dwc3: qcom: mark PM functions as __maybe_unused The #ifdef guards around these are wrong, resulting in warnings in certain configurations: drivers/usb/dwc3/dwc3-qcom.c:244:12: error: 'dwc3_qcom_resume' defined but not used [-Werror=unused-function] static int dwc3_qcom_resume(struct dwc3_qcom *qcom) ^~~~~~~~~~~~~~~~ drivers/usb/dwc3/dwc3-qcom.c:223:12: error: 'dwc3_qcom_suspend' defined but not used [-Werror=unused-function] static int dwc3_qcom_suspend(struct dwc3_qcom *qcom) This replaces the guards with __maybe_unused annotations to shut up the warnings and give better compile time coverage. Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Reviewed-by: Douglas Anderson Acked-by: Geert Uytterhoeven Signed-off-by: Arnd Bergmann Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-qcom.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 8854e428ae08..a6d0203e40b6 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -548,8 +548,7 @@ static int dwc3_qcom_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_SLEEP -static int dwc3_qcom_pm_suspend(struct device *dev) +static int __maybe_unused dwc3_qcom_pm_suspend(struct device *dev) { struct dwc3_qcom *qcom = dev_get_drvdata(dev); int ret = 0; @@ -561,7 +560,7 @@ static int dwc3_qcom_pm_suspend(struct device *dev) return ret; } -static int dwc3_qcom_pm_resume(struct device *dev) +static int __maybe_unused dwc3_qcom_pm_resume(struct device *dev) { struct dwc3_qcom *qcom = dev_get_drvdata(dev); int ret; @@ -572,23 +571,20 @@ static int dwc3_qcom_pm_resume(struct device *dev) return ret; } -#endif -#ifdef CONFIG_PM -static int dwc3_qcom_runtime_suspend(struct device *dev) +static int __maybe_unused dwc3_qcom_runtime_suspend(struct device *dev) { struct dwc3_qcom *qcom = dev_get_drvdata(dev); return dwc3_qcom_suspend(qcom); } -static int dwc3_qcom_runtime_resume(struct device *dev) +static int __maybe_unused dwc3_qcom_runtime_resume(struct device *dev) { struct dwc3_qcom *qcom = dev_get_drvdata(dev); return dwc3_qcom_resume(qcom); } -#endif static const struct dev_pm_ops dwc3_qcom_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(dwc3_qcom_pm_suspend, dwc3_qcom_pm_resume) -- cgit v1.2.3 From 22bb5cfdf13ae70c6a34508a16cfeee48f162443 Mon Sep 17 00:00:00 2001 From: Artur Petrosyan Date: Wed, 23 May 2018 09:26:08 -0400 Subject: usb: dwc2: Fix host exit from hibernation flow. In case when a hub is connected to DWC2 host auto suspend occurs and host goes to hibernation. When any device connected to hub host hibernation exiting incorrectly. - Added dwc2_hcd_rem_wakeup() function call to exit from suspend state by remote wakeup. - Increase timeout value for port suspend bit to be set. Acked-by: Minas Harutyunyan Signed-off-by: Artur Petrosyan Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/hcd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index edaf0b6af4f0..bae08a7d7abd 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -5435,7 +5435,7 @@ int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg) dwc2_writel(hprt0, hsotg->regs + HPRT0); /* Wait for the HPRT0.PrtSusp register field to be set */ - if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 300)) + if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 3000)) dev_warn(hsotg->dev, "Suspend wasn't generated\n"); /* @@ -5616,6 +5616,8 @@ int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup, return ret; } + dwc2_hcd_rem_wakeup(hsotg); + hsotg->hibernated = 0; hsotg->bus_suspended = 0; hsotg->lx_state = DWC2_L0; -- cgit v1.2.3 From 8760675932ddb614e83702117d36ea644050c609 Mon Sep 17 00:00:00 2001 From: William Wu Date: Mon, 21 May 2018 18:12:00 +0800 Subject: usb: dwc2: fix the incorrect bitmaps for the ports of multi_tt hub The dwc2_get_ls_map() use ttport to reference into the bitmap if we're on a multi_tt hub. But the bitmaps index from 0 to (hub->maxchild - 1), while the ttport index from 1 to hub->maxchild. This will cause invalid memory access when the number of ttport is hub->maxchild. Without this patch, I can easily meet a Kernel panic issue if connect a low-speed USB mouse with the max port of FE2.1 multi-tt hub (1a40:0201) on rk3288 platform. Fixes: 9f9f09b048f5 ("usb: dwc2: host: Totally redo the microframe scheduler") Cc: Reviewed-by: Douglas Anderson Acked-by: Minas Harutyunyan hminas@synopsys.com> Signed-off-by: William Wu Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/hcd_queue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c index d7c3d6c776d8..9c55d1addba9 100644 --- a/drivers/usb/dwc2/hcd_queue.c +++ b/drivers/usb/dwc2/hcd_queue.c @@ -383,7 +383,7 @@ static unsigned long *dwc2_get_ls_map(struct dwc2_hsotg *hsotg, /* Get the map and adjust if this is a multi_tt hub */ map = qh->dwc_tt->periodic_bitmaps; if (qh->dwc_tt->usb_tt->multi) - map += DWC2_ELEMENTS_PER_LS_BITMAP * qh->ttport; + map += DWC2_ELEMENTS_PER_LS_BITMAP * (qh->ttport - 1); return map; } -- cgit v1.2.3 From af424a410749ed7e0c2bffd3cedbc7c274d0ff6f Mon Sep 17 00:00:00 2001 From: William Wu Date: Fri, 11 May 2018 17:46:31 +0800 Subject: usb: dwc2: alloc dma aligned buffer for isoc split in The commit 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more supported way") rips out a lot of code to simply the allocation of aligned DMA. However, it also introduces a new issue when use isoc split in transfer. In my test case, I connect the dwc2 controller with an usb hs Hub (GL852G-12), and plug an usb fs audio device (Plantronics headset) into the downstream port of Hub. Then use the usb mic to record, we can find noise when playback. It's because that the usb Hub uses an MDATA for the first transaction and a DATA0 for the second transaction for the isoc split in transaction. An typical isoc split in transaction sequence like this: - SSPLIT IN transaction - CSPLIT IN transaction - MDATA packet - CSPLIT IN transaction - DATA0 packet The DMA address of MDATA (urb->dma) is always DWORD-aligned, but the DMA address of DATA0 (urb->dma + qtd->isoc_split_offset) may not be DWORD-aligned, it depends on the qtd->isoc_split_offset (the length of MDATA). In my test case, the length of MDATA is usually unaligned, this cause DATA0 packet transmission error. This patch use kmem_cache to allocate aligned DMA buf for isoc split in transaction. Note that according to usb 2.0 spec, the maximum data payload size is 1023 bytes for each fs isoc ep, and the maximum allowable interrupt data payload size is 64 bytes or less for fs interrupt ep. So we set the size of object to be 1024 bytes in the kmem cache. Tested-by: Gevorg Sahakyan Tested-by: Heiko Stuebner Acked-by: Minas Harutyunyan hminas@synopsys.com> Signed-off-by: William Wu Reviewed-by: Douglas Anderson Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/core.h | 3 ++ drivers/usb/dwc2/hcd.c | 89 +++++++++++++++++++++++++++++++++++++++++--- drivers/usb/dwc2/hcd.h | 8 ++++ drivers/usb/dwc2/hcd_intr.c | 8 ++++ drivers/usb/dwc2/hcd_queue.c | 3 ++ 5 files changed, 106 insertions(+), 5 deletions(-) diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 4a56ac772a3c..71b3b08ad516 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -1004,6 +1004,7 @@ struct dwc2_hregs_backup { * @frame_list_sz: Frame list size * @desc_gen_cache: Kmem cache for generic descriptors * @desc_hsisoc_cache: Kmem cache for hs isochronous descriptors + * @unaligned_cache: Kmem cache for DMA mode to handle non-aligned buf * * These are for peripheral mode: * @@ -1177,6 +1178,8 @@ struct dwc2_hsotg { u32 frame_list_sz; struct kmem_cache *desc_gen_cache; struct kmem_cache *desc_hsisoc_cache; + struct kmem_cache *unaligned_cache; +#define DWC2_KMEM_UNALIGNED_BUF_SIZE 1024 #endif /* CONFIG_USB_DWC2_HOST || CONFIG_USB_DWC2_DUAL_ROLE */ diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index bae08a7d7abd..b1104be3429c 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -1567,11 +1567,20 @@ static void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg, } if (hsotg->params.host_dma) { - dwc2_writel((u32)chan->xfer_dma, - hsotg->regs + HCDMA(chan->hc_num)); + dma_addr_t dma_addr; + + if (chan->align_buf) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "align_buf\n"); + dma_addr = chan->align_buf; + } else { + dma_addr = chan->xfer_dma; + } + dwc2_writel((u32)dma_addr, hsotg->regs + HCDMA(chan->hc_num)); + if (dbg_hc(chan)) dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n", - (unsigned long)chan->xfer_dma, chan->hc_num); + (unsigned long)dma_addr, chan->hc_num); } /* Start the split */ @@ -2625,6 +2634,35 @@ static void dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg, } } +static int dwc2_alloc_split_dma_aligned_buf(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh, + struct dwc2_host_chan *chan) +{ + if (!hsotg->unaligned_cache || + chan->max_packet > DWC2_KMEM_UNALIGNED_BUF_SIZE) + return -ENOMEM; + + if (!qh->dw_align_buf) { + qh->dw_align_buf = kmem_cache_alloc(hsotg->unaligned_cache, + GFP_ATOMIC | GFP_DMA); + if (!qh->dw_align_buf) + return -ENOMEM; + } + + qh->dw_align_buf_dma = dma_map_single(hsotg->dev, qh->dw_align_buf, + DWC2_KMEM_UNALIGNED_BUF_SIZE, + DMA_FROM_DEVICE); + + if (dma_mapping_error(hsotg->dev, qh->dw_align_buf_dma)) { + dev_err(hsotg->dev, "can't map align_buf\n"); + chan->align_buf = 0; + return -EINVAL; + } + + chan->align_buf = qh->dw_align_buf_dma; + return 0; +} + #define DWC2_USB_DMA_ALIGN 4 struct dma_aligned_buffer { @@ -2802,6 +2840,32 @@ static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) /* Set the transfer attributes */ dwc2_hc_init_xfer(hsotg, chan, qtd); + /* For non-dword aligned buffers */ + if (hsotg->params.host_dma && qh->do_split && + chan->ep_is_in && (chan->xfer_dma & 0x3)) { + dev_vdbg(hsotg->dev, "Non-aligned buffer\n"); + if (dwc2_alloc_split_dma_aligned_buf(hsotg, qh, chan)) { + dev_err(hsotg->dev, + "Failed to allocate memory to handle non-aligned buffer\n"); + /* Add channel back to free list */ + chan->align_buf = 0; + chan->multi_count = 0; + list_add_tail(&chan->hc_list_entry, + &hsotg->free_hc_list); + qtd->in_process = 0; + qh->channel = NULL; + return -ENOMEM; + } + } else { + /* + * We assume that DMA is always aligned in non-split + * case or split out case. Warn if not. + */ + WARN_ON_ONCE(hsotg->params.host_dma && + (chan->xfer_dma & 0x3)); + chan->align_buf = 0; + } + if (chan->ep_type == USB_ENDPOINT_XFER_INT || chan->ep_type == USB_ENDPOINT_XFER_ISOC) /* @@ -5246,6 +5310,19 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg) } } + if (hsotg->params.host_dma) { + /* + * Create kmem caches to handle non-aligned buffer + * in Buffer DMA mode. + */ + hsotg->unaligned_cache = kmem_cache_create("dwc2-unaligned-dma", + DWC2_KMEM_UNALIGNED_BUF_SIZE, 4, + SLAB_CACHE_DMA, NULL); + if (!hsotg->unaligned_cache) + dev_err(hsotg->dev, + "unable to create dwc2 unaligned cache\n"); + } + hsotg->otg_port = 1; hsotg->frame_list = NULL; hsotg->frame_list_dma = 0; @@ -5280,8 +5357,9 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg) return 0; error4: - kmem_cache_destroy(hsotg->desc_gen_cache); + kmem_cache_destroy(hsotg->unaligned_cache); kmem_cache_destroy(hsotg->desc_hsisoc_cache); + kmem_cache_destroy(hsotg->desc_gen_cache); error3: dwc2_hcd_release(hsotg); error2: @@ -5322,8 +5400,9 @@ void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) usb_remove_hcd(hcd); hsotg->priv = NULL; - kmem_cache_destroy(hsotg->desc_gen_cache); + kmem_cache_destroy(hsotg->unaligned_cache); kmem_cache_destroy(hsotg->desc_hsisoc_cache); + kmem_cache_destroy(hsotg->desc_gen_cache); dwc2_hcd_release(hsotg); usb_put_hcd(hcd); diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h index 7db1ee7e7a77..5502a501f516 100644 --- a/drivers/usb/dwc2/hcd.h +++ b/drivers/usb/dwc2/hcd.h @@ -76,6 +76,8 @@ struct dwc2_qh; * (micro)frame * @xfer_buf: Pointer to current transfer buffer position * @xfer_dma: DMA address of xfer_buf + * @align_buf: In Buffer DMA mode this will be used if xfer_buf is not + * DWORD aligned * @xfer_len: Total number of bytes to transfer * @xfer_count: Number of bytes transferred so far * @start_pkt_count: Packet count at start of transfer @@ -133,6 +135,7 @@ struct dwc2_host_chan { u8 *xfer_buf; dma_addr_t xfer_dma; + dma_addr_t align_buf; u32 xfer_len; u32 xfer_count; u16 start_pkt_count; @@ -302,6 +305,9 @@ struct dwc2_hs_transfer_time { * speed. Note that this is in "schedule slice" which * is tightly packed. * @ntd: Actual number of transfer descriptors in a list + * @dw_align_buf: Used instead of original buffer if its physical address + * is not dword-aligned + * @dw_align_buf_dma: DMA address for dw_align_buf * @qtd_list: List of QTDs for this QH * @channel: Host channel currently processing transfers for this QH * @qh_list_entry: Entry for QH in either the periodic or non-periodic @@ -350,6 +356,8 @@ struct dwc2_qh { struct dwc2_hs_transfer_time hs_transfers[DWC2_HS_SCHEDULE_UFRAMES]; u32 ls_start_schedule_slice; u16 ntd; + u8 *dw_align_buf; + dma_addr_t dw_align_buf_dma; struct list_head qtd_list; struct dwc2_host_chan *channel; struct list_head qh_list_entry; diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index fbea5e3fb947..f3429ac4a6bb 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -950,6 +950,14 @@ static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg, frame_desc->actual_length += len; + if (chan->align_buf) { + dev_vdbg(hsotg->dev, "non-aligned buffer\n"); + dma_unmap_single(hsotg->dev, chan->qh->dw_align_buf_dma, + DWC2_KMEM_UNALIGNED_BUF_SIZE, DMA_FROM_DEVICE); + memcpy(qtd->urb->buf + (chan->xfer_dma - qtd->urb->dma), + chan->qh->dw_align_buf, len); + } + qtd->isoc_split_offset += len; hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum)); diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c index 9c55d1addba9..301ced1618f8 100644 --- a/drivers/usb/dwc2/hcd_queue.c +++ b/drivers/usb/dwc2/hcd_queue.c @@ -1696,6 +1696,9 @@ void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) if (qh->desc_list) dwc2_hcd_qh_free_ddma(hsotg, qh); + else if (hsotg->unaligned_cache && qh->dw_align_buf) + kmem_cache_free(hsotg->unaligned_cache, qh->dw_align_buf); + kfree(qh); } -- cgit v1.2.3 From 70c3c8cb83856758025c2a211dd022bc0478922a Mon Sep 17 00:00:00 2001 From: William Wu Date: Fri, 11 May 2018 17:46:32 +0800 Subject: usb: dwc2: fix isoc split in transfer with no data If isoc split in transfer with no data (the length of DATA0 packet is zero), we can't simply return immediately. Because the DATA0 can be the first transaction or the second transaction for the isoc split in transaction. If the DATA0 packet with no data is in the first transaction, we can return immediately. But if the DATA0 packet with no data is in the second transaction of isoc split in transaction sequence, we need to increase the qtd->isoc_frame_index and giveback urb to device driver if needed, otherwise, the MDATA packet will be lost. A typical test case is that connect the dwc2 controller with an usb hs Hub (GL852G-12), and plug an usb fs audio device (Plantronics headset) into the downstream port of Hub. Then use the usb mic to record, we can find noise when playback. In the case, the isoc split in transaction sequence like this: - SSPLIT IN transaction - CSPLIT IN transaction - MDATA packet (176 bytes) - CSPLIT IN transaction - DATA0 packet (0 byte) This patch use both the length of DATA0 and qtd->isoc_split_offset to check if the DATA0 is in the second transaction. Tested-by: Gevorg Sahakyan Tested-by: Heiko Stuebner Acked-by: Minas Harutyunyan hminas@synopsys.com> Signed-off-by: William Wu Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/hcd_intr.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index f3429ac4a6bb..ed7f05cf4906 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -942,9 +942,8 @@ static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg, frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; len = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd, DWC2_HC_XFER_COMPLETE, NULL); - if (!len) { + if (!len && !qtd->isoc_split_offset) { qtd->complete_split = 0; - qtd->isoc_split_offset = 0; return 0; } -- cgit v1.2.3 From 980900d6318066b9f8314bfb87329a20fd0d1ca4 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Fri, 25 May 2018 17:24:57 +0800 Subject: usb: gadget: composite: fix delayed_status race condition when set_interface It happens when enable debug log, if set_alt() returns USB_GADGET_DELAYED_STATUS and usb_composite_setup_continue() is called before increasing count of @delayed_status, so fix it by using spinlock of @cdev->lock. Signed-off-by: Chunfeng Yun Tested-by: Jay Hsu Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index f242c2bcea81..d2fa071c21b1 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1719,6 +1719,8 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) */ if (w_value && !f->get_alt) break; + + spin_lock(&cdev->lock); value = f->set_alt(f, w_index, w_value); if (value == USB_GADGET_DELAYED_STATUS) { DBG(cdev, @@ -1728,6 +1730,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) DBG(cdev, "delayed_status count %d\n", cdev->delayed_status); } + spin_unlock(&cdev->lock); break; case USB_REQ_GET_INTERFACE: if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) -- cgit v1.2.3 From 9bb073a053f0464ea74a4d4c331fdb7da58568d6 Mon Sep 17 00:00:00 2001 From: Grigor Tovmasyan Date: Thu, 24 May 2018 18:22:30 +0400 Subject: usb: gadget: dwc2: fix memory leak in gadget_init() Freed allocated request for ep0 to prevent memory leak in case when dwc2_driver_probe() failed. Cc: Stefan Wahren Cc: Marek Szyprowski Tested-by: Stefan Wahren Tested-by: Marek Szyprowski Acked-by: Minas Harutyunyan Signed-off-by: Grigor Tovmasyan Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index fa3b6f361074..76e4f2e7d947 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -4735,9 +4735,11 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg) } ret = usb_add_gadget_udc(dev, &hsotg->gadget); - if (ret) + if (ret) { + dwc2_hsotg_ep_free_request(&hsotg->eps_out[0]->ep, + hsotg->ctrl_req); return ret; - + } dwc2_hsotg_dump(hsotg); return 0; @@ -4751,6 +4753,7 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg) int dwc2_hsotg_remove(struct dwc2_hsotg *hsotg) { usb_del_gadget_udc(&hsotg->gadget); + dwc2_hsotg_ep_free_request(&hsotg->eps_out[0]->ep, hsotg->ctrl_req); return 0; } -- cgit v1.2.3 From 1d8e5c00275825fc42aaa5597dab1d0b5b26bb64 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Wed, 23 May 2018 16:24:44 +0400 Subject: dwc2: gadget: Fix ISOC IN DDMA PID bitfield value calculation PID bitfield in descriptor should be set based on particular request length, not based on EP's mc value. PID value can't be set to 0 even request length is 0. Signed-off-by: Minas Harutyunyan Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 76e4f2e7d947..a0f82cca2d9a 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -812,6 +812,7 @@ static int dwc2_gadget_fill_isoc_desc(struct dwc2_hsotg_ep *hs_ep, u32 index; u32 maxsize = 0; u32 mask = 0; + u8 pid = 0; maxsize = dwc2_gadget_get_desc_params(hs_ep, &mask); @@ -840,7 +841,11 @@ static int dwc2_gadget_fill_isoc_desc(struct dwc2_hsotg_ep *hs_ep, ((len << DEV_DMA_NBYTES_SHIFT) & mask)); if (hs_ep->dir_in) { - desc->status |= ((hs_ep->mc << DEV_DMA_ISOC_PID_SHIFT) & + if (len) + pid = DIV_ROUND_UP(len, hs_ep->ep.maxpacket); + else + pid = 1; + desc->status |= ((pid << DEV_DMA_ISOC_PID_SHIFT) & DEV_DMA_ISOC_PID_MASK) | ((len % hs_ep->ep.maxpacket) ? DEV_DMA_SHORT : 0) | -- cgit v1.2.3 From 3f77f244d8ec28e3a0a81240ffac7d626390060c Mon Sep 17 00:00:00 2001 From: Martin Kaiser Date: Mon, 18 Jun 2018 22:41:03 +0200 Subject: mtd: rawnand: mxc: set spare area size register explicitly The v21 version of the NAND flash controller contains a Spare Area Size Register (SPAS) at offset 0x10. Its setting defaults to the maximum spare area size of 218 bytes. The size that is set in this register is used by the controller when it calculates the ECC bytes internally in hardware. Usually, this register is updated from settings in the IIM fuses when the system is booting from NAND flash. For other boot media, however, the SPAS register remains at the default setting, which may not work for the particular flash chip on the board. The same goes for flash chips whose configuration cannot be set in the IIM fuses (e.g. chips with 2k sector size and 128 bytes spare area size can't be configured in the IIM fuses on imx25 systems). Set the SPAS register explicitly during the preset operation. Derive the register value from mtd->oobsize that was detected during probe by decoding the flash chip's ID bytes. While at it, rename the define for the spare area register's offset to NFC_V21_RSLTSPARE_AREA. The register at offset 0x10 on v1 controllers is different from the register on v21 controllers. Fixes: d484018 ("mtd: mxc_nand: set NFC registers after reset") Cc: stable@vger.kernel.org Signed-off-by: Martin Kaiser Reviewed-by: Sascha Hauer Reviewed-by: Miquel Raynal Signed-off-by: Boris Brezillon --- drivers/mtd/nand/raw/mxc_nand.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c index 45786e707b7b..26cef218bb43 100644 --- a/drivers/mtd/nand/raw/mxc_nand.c +++ b/drivers/mtd/nand/raw/mxc_nand.c @@ -48,7 +48,7 @@ #define NFC_V1_V2_CONFIG (host->regs + 0x0a) #define NFC_V1_V2_ECC_STATUS_RESULT (host->regs + 0x0c) #define NFC_V1_V2_RSLTMAIN_AREA (host->regs + 0x0e) -#define NFC_V1_V2_RSLTSPARE_AREA (host->regs + 0x10) +#define NFC_V21_RSLTSPARE_AREA (host->regs + 0x10) #define NFC_V1_V2_WRPROT (host->regs + 0x12) #define NFC_V1_UNLOCKSTART_BLKADDR (host->regs + 0x14) #define NFC_V1_UNLOCKEND_BLKADDR (host->regs + 0x16) @@ -1274,6 +1274,9 @@ static void preset_v2(struct mtd_info *mtd) writew(config1, NFC_V1_V2_CONFIG1); /* preset operation */ + /* spare area size in 16-bit half-words */ + writew(mtd->oobsize / 2, NFC_V21_RSLTSPARE_AREA); + /* Unlock the internal RAM Buffer */ writew(0x2, NFC_V1_V2_CONFIG); -- cgit v1.2.3 From 6362f0a290023bafd7f991089e81dd9278f154b8 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 19 Jun 2018 10:12:48 -0600 Subject: libata: add command iterator helpers Now that we have the internal tag as a special (higher) value tag, it gets a bit tricky to iterate the internal commands as some loops will exceed ATA_MAX_QUEUE. Add explicit helpers for iterating pending commands, both inflight and internal. Signed-off-by: Jens Axboe Signed-off-by: Tejun Heo --- include/linux/libata.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/include/linux/libata.h b/include/linux/libata.h index 8b8946dd63b9..a2257e380789 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1495,6 +1495,29 @@ static inline bool ata_tag_valid(unsigned int tag) return tag < ATA_MAX_QUEUE || ata_tag_internal(tag); } +#define __ata_qc_for_each(ap, qc, tag, max_tag, fn) \ + for ((tag) = 0; (tag) < (max_tag) && \ + ({ qc = fn((ap), (tag)); 1; }); (tag)++) \ + +/* + * Internal use only, iterate commands ignoring error handling and + * status of 'qc'. + */ +#define ata_qc_for_each_raw(ap, qc, tag) \ + __ata_qc_for_each(ap, qc, tag, ATA_MAX_QUEUE, __ata_qc_from_tag) + +/* + * Iterate all potential commands that can be queued + */ +#define ata_qc_for_each(ap, qc, tag) \ + __ata_qc_for_each(ap, qc, tag, ATA_MAX_QUEUE, ata_qc_from_tag) + +/* + * Like ata_qc_for_each, but with the internal tag included + */ +#define ata_qc_for_each_with_internal(ap, qc, tag) \ + __ata_qc_for_each(ap, qc, tag, ATA_MAX_QUEUE + 1, ata_qc_from_tag) + /* * device helpers */ -- cgit v1.2.3 From 258c4e5c65b21bdbe9735f49ea584b3059c810e4 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 19 Jun 2018 10:12:49 -0600 Subject: libata: convert eh to command iterators Signed-off-by: Jens Axboe Signed-off-by: Tejun Heo --- drivers/ata/libata-eh.c | 41 ++++++++++++++++------------------------- 1 file changed, 16 insertions(+), 25 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index d5412145d76d..01306c018398 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -614,8 +614,7 @@ void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap, list_for_each_entry_safe(scmd, tmp, eh_work_q, eh_entry) { struct ata_queued_cmd *qc; - for (i = 0; i < ATA_MAX_QUEUE; i++) { - qc = __ata_qc_from_tag(ap, i); + ata_qc_for_each_raw(ap, qc, i) { if (qc->flags & ATA_QCFLAG_ACTIVE && qc->scsicmd == scmd) break; @@ -818,14 +817,13 @@ EXPORT_SYMBOL_GPL(ata_port_wait_eh); static int ata_eh_nr_in_flight(struct ata_port *ap) { + struct ata_queued_cmd *qc; unsigned int tag; int nr = 0; /* count only non-internal commands */ - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - if (ata_tag_internal(tag)) - continue; - if (ata_qc_from_tag(ap, tag)) + ata_qc_for_each(ap, qc, tag) { + if (qc) nr++; } @@ -847,13 +845,13 @@ void ata_eh_fastdrain_timerfn(struct timer_list *t) goto out_unlock; if (cnt == ap->fastdrain_cnt) { + struct ata_queued_cmd *qc; unsigned int tag; /* No progress during the last interval, tag all * in-flight qcs as timed out and freeze the port. */ - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag); + ata_qc_for_each(ap, qc, tag) { if (qc) qc->err_mask |= AC_ERR_TIMEOUT; } @@ -999,6 +997,7 @@ void ata_port_schedule_eh(struct ata_port *ap) static int ata_do_link_abort(struct ata_port *ap, struct ata_link *link) { + struct ata_queued_cmd *qc; int tag, nr_aborted = 0; WARN_ON(!ap->ops->error_handler); @@ -1007,9 +1006,7 @@ static int ata_do_link_abort(struct ata_port *ap, struct ata_link *link) ata_eh_set_pending(ap, 0); /* include internal tag in iteration */ - for (tag = 0; tag <= ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag); - + ata_qc_for_each_with_internal(ap, qc, tag) { if (qc && (!link || qc->dev->link == link)) { qc->flags |= ATA_QCFLAG_FAILED; ata_qc_complete(qc); @@ -1712,9 +1709,7 @@ void ata_eh_analyze_ncq_error(struct ata_link *link) return; /* has LLDD analyzed already? */ - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - qc = __ata_qc_from_tag(ap, tag); - + ata_qc_for_each_raw(ap, qc, tag) { if (!(qc->flags & ATA_QCFLAG_FAILED)) continue; @@ -2136,6 +2131,7 @@ static void ata_eh_link_autopsy(struct ata_link *link) { struct ata_port *ap = link->ap; struct ata_eh_context *ehc = &link->eh_context; + struct ata_queued_cmd *qc; struct ata_device *dev; unsigned int all_err_mask = 0, eflags = 0; int tag, nr_failed = 0, nr_quiet = 0; @@ -2168,9 +2164,7 @@ static void ata_eh_link_autopsy(struct ata_link *link) all_err_mask |= ehc->i.err_mask; - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - + ata_qc_for_each_raw(ap, qc, tag) { if (!(qc->flags & ATA_QCFLAG_FAILED) || ata_dev_phys_link(qc->dev) != link) continue; @@ -2436,6 +2430,7 @@ static void ata_eh_link_report(struct ata_link *link) { struct ata_port *ap = link->ap; struct ata_eh_context *ehc = &link->eh_context; + struct ata_queued_cmd *qc; const char *frozen, *desc; char tries_buf[6] = ""; int tag, nr_failed = 0; @@ -2447,9 +2442,7 @@ static void ata_eh_link_report(struct ata_link *link) if (ehc->i.desc[0] != '\0') desc = ehc->i.desc; - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - + ata_qc_for_each_raw(ap, qc, tag) { if (!(qc->flags & ATA_QCFLAG_FAILED) || ata_dev_phys_link(qc->dev) != link || ((qc->flags & ATA_QCFLAG_QUIET) && @@ -2511,8 +2504,7 @@ static void ata_eh_link_report(struct ata_link *link) ehc->i.serror & SERR_DEV_XCHG ? "DevExch " : ""); #endif - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + ata_qc_for_each_raw(ap, qc, tag) { struct ata_taskfile *cmd = &qc->tf, *res = &qc->result_tf; char data_buf[20] = ""; char cdb_buf[70] = ""; @@ -3992,12 +3984,11 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, */ void ata_eh_finish(struct ata_port *ap) { + struct ata_queued_cmd *qc; int tag; /* retry or finish qcs */ - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - + ata_qc_for_each_raw(ap, qc, tag) { if (!(qc->flags & ATA_QCFLAG_FAILED)) continue; -- cgit v1.2.3 From d3543b4d1b48afd931ed4afb6f861e6122657b6f Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 19 Jun 2018 10:12:50 -0600 Subject: sata_fsl: convert to command iterator We need to iterate all commands, including the internal one, for ATAPI error handling. Fixes: 28361c403683 ("libata: add extra internal command") Signed-off-by: Jens Axboe Signed-off-by: Tejun Heo --- drivers/ata/sata_fsl.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index b8d9cfc60374..bb5ec5f71e73 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -1229,8 +1229,7 @@ static void sata_fsl_host_intr(struct ata_port *ap) /* Workaround for data length mismatch errata */ if (unlikely(hstatus & INT_ON_DATA_LENGTH_MISMATCH)) { - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - qc = ata_qc_from_tag(ap, tag); + ata_qc_for_each_with_internal(ap, qc, tag) { if (qc && ata_is_atapi(qc->tf.protocol)) { u32 hcontrol; /* Set HControl[27] to clear error registers */ -- cgit v1.2.3 From eb36333de4bfba57fa6f8f88052e53180d54708e Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 19 Jun 2018 10:12:51 -0600 Subject: sata_fsl: remove dead code in tag retrieval We can never pass in the internal tag to this helper, it'll always be the hardware tag. So there's no need to check and do an internal translation of that tag. Signed-off-by: Jens Axboe Signed-off-by: Tejun Heo --- drivers/ata/sata_fsl.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index bb5ec5f71e73..4dc528bf8e85 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -395,12 +395,6 @@ static inline unsigned int sata_fsl_tag(unsigned int tag, { /* We let libATA core do actual (queue) tag allocation */ - /* all non NCQ/queued commands should have tag#0 */ - if (ata_tag_internal(tag)) { - DPRINTK("mapping internal cmds to tag#0\n"); - return 0; - } - if (unlikely(tag >= SATA_FSL_QUEUE_DEPTH)) { DPRINTK("tag %d invalid : out of range\n", tag); return 0; -- cgit v1.2.3 From 63ce3c384db26494615e3c8972bcd419ed71f4c4 Mon Sep 17 00:00:00 2001 From: David Disseldorp Date: Tue, 19 Jun 2018 17:58:24 +0200 Subject: scsi: target: Fix truncated PR-in ReadKeys response SPC5r17 states that the contents of the ADDITIONAL LENGTH field are not altered based on the allocation length, so always calculate and pack the full key list length even if the list itself is truncated. According to Maged: Yes it fixes the "Storage Spaces Persistent Reservation" test in the Windows 2016 Server Failover Cluster validation suites when having many connections that result in more than 8 registrations. I tested your patch on 4.17 with iblock. This behaviour can be tested using the libiscsi PrinReadKeys.Truncate test. Cc: stable@vger.kernel.org Signed-off-by: David Disseldorp Reviewed-by: Mike Christie Tested-by: Maged Mokhtar Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- drivers/target/target_core_pr.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 01ac306131c1..10db5656fd5d 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -3727,11 +3727,16 @@ core_scsi3_pri_read_keys(struct se_cmd *cmd) * Check for overflow of 8byte PRI READ_KEYS payload and * next reservation key list descriptor. */ - if ((add_len + 8) > (cmd->data_length - 8)) - break; - - put_unaligned_be64(pr_reg->pr_res_key, &buf[off]); - off += 8; + if (off + 8 <= cmd->data_length) { + put_unaligned_be64(pr_reg->pr_res_key, &buf[off]); + off += 8; + } + /* + * SPC5r17: 6.16.2 READ KEYS service action + * The ADDITIONAL LENGTH field indicates the number of bytes in + * the Reservation key list. The contents of the ADDITIONAL + * LENGTH field are not altered based on the allocation length + */ add_len += 8; } spin_unlock(&dev->t10_pr.registration_lock); -- cgit v1.2.3 From ca95ef7c98674a8eb5d411fc0835783051c0662b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 12 Jun 2018 15:03:02 +0300 Subject: rtc: mrst: fix error code in probe() We should be returning "retval". The "mrst_rtc.rtc" variable is a valid pointer. Fixes: 32b41f93dcaf ("rtc: mrst: switch to devm functions") Signed-off-by: Dan Carpenter Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-mrst.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c index 097a4d4e2aba..1925aaf09093 100644 --- a/drivers/rtc/rtc-mrst.c +++ b/drivers/rtc/rtc-mrst.c @@ -367,10 +367,8 @@ static int vrtc_mrst_do_probe(struct device *dev, struct resource *iomem, } retval = rtc_register_device(mrst_rtc.rtc); - if (retval) { - retval = PTR_ERR(mrst_rtc.rtc); + if (retval) goto cleanup0; - } dev_dbg(dev, "initialised\n"); return 0; -- cgit v1.2.3 From 2f24ef7413a4d91657ef04e77c27ce0b313e6c95 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Wed, 29 Nov 2017 11:21:45 +0300 Subject: ARC: Enable machine_desc->init_per_cpu for !CONFIG_SMP machine_desc->init_per_cpu() hook is supposed to be per cpu initialization and would seem to apply equally to UP and/or SMP. Infact the comment in header file seems to suggest it works for UP too, which was not the case and this patch. This enables !CONFIG_SMP build for platforms such as hsdk. Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta [vgupta: trimmeed changelog] --- arch/arc/include/asm/mach_desc.h | 2 -- arch/arc/kernel/irq.c | 2 +- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arc/include/asm/mach_desc.h b/arch/arc/include/asm/mach_desc.h index c28e6c347b49..871f3cb16af9 100644 --- a/arch/arc/include/asm/mach_desc.h +++ b/arch/arc/include/asm/mach_desc.h @@ -34,9 +34,7 @@ struct machine_desc { const char *name; const char **dt_compat; void (*init_early)(void); -#ifdef CONFIG_SMP void (*init_per_cpu)(unsigned int); -#endif void (*init_machine)(void); void (*init_late)(void); diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index 538b36afe89e..62b185057c04 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -31,10 +31,10 @@ void __init init_IRQ(void) /* a SMP H/w block could do IPI IRQ request here */ if (plat_smp_ops.init_per_cpu) plat_smp_ops.init_per_cpu(smp_processor_id()); +#endif if (machine_desc->init_per_cpu) machine_desc->init_per_cpu(smp_processor_id()); -#endif } /* -- cgit v1.2.3 From f04684b4d85d6371126f476d3268ebf6a0bd57cf Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 21 Jun 2018 11:07:21 +0300 Subject: ALSA: lx6464es: Missing error code in snd_lx6464es_create() We forgot to set the error code on this error path. Fixes: 4a23fc8cc068 ("ALSA: lx6464es: add error handling for pci_ioremap_bar") Signed-off-by: Dan Carpenter Signed-off-by: Takashi Iwai --- sound/pci/lx6464es/lx6464es.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c index 6c85f13ab23f..54f6252faca6 100644 --- a/sound/pci/lx6464es/lx6464es.c +++ b/sound/pci/lx6464es/lx6464es.c @@ -1018,6 +1018,7 @@ static int snd_lx6464es_create(struct snd_card *card, chip->port_dsp_bar = pci_ioremap_bar(pci, 2); if (!chip->port_dsp_bar) { dev_err(card->dev, "cannot remap PCI memory region\n"); + err = -ENOMEM; goto remap_pci_failed; } -- cgit v1.2.3 From 57cb54e53bddb59f5f542ddd4b0bfe005d31a8d5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 21 Jun 2018 13:33:53 +0200 Subject: ALSA: hda - Force to link down at runtime suspend on ATI/AMD HDMI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Henning Kühn reported that the discrete AMD GPU on his hybrid graphics laptop no longer runtime-suspends due to the recent commit 07f4f97d7b4b ("vga_switcheroo: Use device link for HDA controller"). The root cause is that the HDMI codec on AMD GPU doesn't support CLKSTOP and EPSS, which are currently mandatory for powering down the HD-audio link at runtime suspend. Because the HD-audio link is still up, HD-audio controller driver blocks the transition to D3. For addressing the regression, this patch adds a new flag to indicate the forced link-down, and sets it for AMD HDMI codecs appropriately in the codec driver. Fixes: 07f4f97d7b4b ("vga_switcheroo: Use device link for HDA controller") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106957 Reported-by: Lukas Wunner Reported-and-tested-by: Henning Kühn Cc: # v4.17+ Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 5 +++-- sound/pci/hda/hda_codec.h | 1 + sound/pci/hda/patch_hdmi.c | 5 +++++ 3 files changed, 9 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index d91c87e41756..20a171ac4bb2 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -2899,8 +2899,9 @@ static int hda_codec_runtime_suspend(struct device *dev) list_for_each_entry(pcm, &codec->pcm_list_head, list) snd_pcm_suspend_all(pcm->pcm); state = hda_call_codec_suspend(codec); - if (codec_has_clkstop(codec) && codec_has_epss(codec) && - (state & AC_PWRST_CLK_STOP_OK)) + if (codec->link_down_at_suspend || + (codec_has_clkstop(codec) && codec_has_epss(codec) && + (state & AC_PWRST_CLK_STOP_OK))) snd_hdac_codec_link_down(&codec->core); snd_hdac_link_power(&codec->core, false); return 0; diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 681c360f29f9..a8b1b31f161c 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -258,6 +258,7 @@ struct hda_codec { unsigned int power_save_node:1; /* advanced PM for each widget */ unsigned int auto_runtime_pm:1; /* enable automatic codec runtime pm */ unsigned int force_pin_prefix:1; /* Add location prefix */ + unsigned int link_down_at_suspend:1; /* link down at runtime suspend */ #ifdef CONFIG_PM unsigned long power_on_acct; unsigned long power_off_acct; diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 8840daf9c6a3..98e1c411c56a 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -3741,6 +3741,11 @@ static int patch_atihdmi(struct hda_codec *codec) spec->chmap.channels_max = max(spec->chmap.channels_max, 8u); + /* AMD GPUs have neither EPSS nor CLKSTOP bits, hence preventing + * the link-down as is. Tell the core to allow it. + */ + codec->link_down_at_suspend = 1; + return 0; } -- cgit v1.2.3 From 54b0a2011dfcd2e3fe2c28062694fbbe3eb377a3 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 14 Jun 2018 08:24:39 +0200 Subject: microblaze: Add new syscalls io_pgetevents and rseq Wire up new syscalls io_pgetevents and rseq. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/unistd.h | 2 +- arch/microblaze/include/uapi/asm/unistd.h | 2 ++ arch/microblaze/kernel/syscall_table.S | 2 ++ 3 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index 9774e1d9507b..a62d09420a47 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -38,6 +38,6 @@ #endif /* __ASSEMBLY__ */ -#define __NR_syscalls 399 +#define __NR_syscalls 401 #endif /* _ASM_MICROBLAZE_UNISTD_H */ diff --git a/arch/microblaze/include/uapi/asm/unistd.h b/arch/microblaze/include/uapi/asm/unistd.h index eb156f914793..7a9f16a76413 100644 --- a/arch/microblaze/include/uapi/asm/unistd.h +++ b/arch/microblaze/include/uapi/asm/unistd.h @@ -415,5 +415,7 @@ #define __NR_pkey_alloc 396 #define __NR_pkey_free 397 #define __NR_statx 398 +#define __NR_io_pgetevents 399 +#define __NR_rseq 400 #endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */ diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 56bcf313121f..6ab650593792 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -400,3 +400,5 @@ ENTRY(sys_call_table) .long sys_pkey_alloc .long sys_pkey_free .long sys_statx + .long sys_io_pgetevents + .long sys_rseq -- cgit v1.2.3 From 2dbeb7040a21846facbeea876e85cbde41fa81e9 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 19 Jun 2018 15:36:19 -0600 Subject: microblaze: remove unecessary of_platform_bus_probe call The call to of_platform_bus_probe has no effect because the DT core already probes default buses like "simple-bus" before this call. Michal Simek said 'xlnx,compound' hasn't been used in a long time, so that match entry isn't needed. Cc: Michal Simek Signed-off-by: Rob Herring Signed-off-by: Michal Simek --- arch/microblaze/kernel/platform.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/microblaze/kernel/platform.c b/arch/microblaze/kernel/platform.c index 2540d60610d9..b9a414552d9b 100644 --- a/arch/microblaze/kernel/platform.c +++ b/arch/microblaze/kernel/platform.c @@ -14,15 +14,8 @@ #include #include -static struct of_device_id xilinx_of_bus_ids[] __initdata = { - { .compatible = "simple-bus", }, - { .compatible = "xlnx,compound", }, - {} -}; - static int __init microblaze_device_probe(void) { - of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL); of_platform_reset_gpio_probe(); return 0; } -- cgit v1.2.3 From 45df561a7ae2ca5080708cc2cf84a236f4d930ef Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 19 Jun 2018 15:36:20 -0600 Subject: microblaze: consolidate GPIO reset handling Now that platform.c only has the GPIO reset handling left, move the initcall to reset.c and remove platform.c. Cc: Michal Simek Signed-off-by: Rob Herring Signed-off-by: Michal Simek --- arch/microblaze/include/asm/setup.h | 2 -- arch/microblaze/kernel/Makefile | 2 +- arch/microblaze/kernel/platform.c | 22 ---------------------- arch/microblaze/kernel/reset.c | 11 ++++++----- 4 files changed, 7 insertions(+), 30 deletions(-) delete mode 100644 arch/microblaze/kernel/platform.c diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h index a38e4a56e3c6..ce9b7b786156 100644 --- a/arch/microblaze/include/asm/setup.h +++ b/arch/microblaze/include/asm/setup.h @@ -23,8 +23,6 @@ extern char *klimit; extern void mmu_reset(void); # endif /* CONFIG_MMU */ -extern void of_platform_reset_gpio_probe(void); - void time_init(void); void init_IRQ(void); void machine_early_init(const char *cmdline, unsigned int ram, diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile index 3a53378d66d9..dd71637437f4 100644 --- a/arch/microblaze/kernel/Makefile +++ b/arch/microblaze/kernel/Makefile @@ -16,7 +16,7 @@ extra-y := head.o vmlinux.lds obj-y += dma.o exceptions.o \ hw_exception_handler.o irq.o \ - platform.o process.o prom.o ptrace.o \ + process.o prom.o ptrace.o \ reset.o setup.o signal.o sys_microblaze.o timer.o traps.o unwind.o obj-y += cpu/ diff --git a/arch/microblaze/kernel/platform.c b/arch/microblaze/kernel/platform.c deleted file mode 100644 index b9a414552d9b..000000000000 --- a/arch/microblaze/kernel/platform.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright 2008 Michal Simek - * - * based on virtex.c file - * - * Copyright 2007 Secret Lab Technologies Ltd. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include -#include -#include - -static int __init microblaze_device_probe(void) -{ - of_platform_reset_gpio_probe(); - return 0; -} -device_initcall(microblaze_device_probe); diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c index bab4c8330ef4..fcbe1daf6316 100644 --- a/arch/microblaze/kernel/reset.c +++ b/arch/microblaze/kernel/reset.c @@ -18,7 +18,7 @@ static int handle; /* reset pin handle */ static unsigned int reset_val; -void of_platform_reset_gpio_probe(void) +static int of_platform_reset_gpio_probe(void) { int ret; handle = of_get_named_gpio(of_find_node_by_path("/"), @@ -27,13 +27,13 @@ void of_platform_reset_gpio_probe(void) if (!gpio_is_valid(handle)) { pr_info("Skipping unavailable RESET gpio %d (%s)\n", handle, "reset"); - return; + return -ENODEV; } ret = gpio_request(handle, "reset"); if (ret < 0) { pr_info("GPIO pin is already allocated\n"); - return; + return ret; } /* get current setup value */ @@ -51,11 +51,12 @@ void of_platform_reset_gpio_probe(void) pr_info("RESET: Registered gpio device: %d, current val: %d\n", handle, reset_val); - return; + return 0; err: gpio_free(handle); - return; + return ret; } +device_initcall(of_platform_reset_gpio_probe); static void gpio_system_reset(void) -- cgit v1.2.3 From 12f8c553a503d98b519cca650b188bf51ebdbdbf Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 18 Apr 2018 20:52:31 +0900 Subject: clk: sunxi-ng: replace lib-y with obj-y We had commit 06e226c7fb23 ("clk: sunxi-ng: Move all clock types to a library") and commit 799c43415442 ("kbuild: thin archives make default for all archs") in the same development cycle, from different trees. With migration to the thin archive, the entire drivers/clk/sunxi-ng/lib.a is linked to the vmlinux. This does not break build, but we do not get any size saving. However, we do not need to go back to the individual Kconfig options. The default configuration pulls in all (or most) of the CCU parts anyway. Also, once we enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION, we can simply list all files with obj-y, and the linker will drop all unused functions by itself. After the long discussion [1], people there agreed to fix this, but nobody sent a patch after all. I am doing it now. I lifted up CONFIG_SUNXI_CCU to drivers/clk/Makefile because everything in drivers/clk/sunxi-ng/ depends on SUNXI_CCU. [1] https://patchwork.kernel.org/patch/9796521/ Signed-off-by: Masahiro Yamada Acked-by: Stephen Boyd Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai Signed-off-by: Stephen Boyd --- drivers/clk/Makefile | 2 +- drivers/clk/sunxi-ng/Makefile | 39 +++++++++++++++------------------------ 2 files changed, 16 insertions(+), 25 deletions(-) diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index ae40cbe770f0..0bb25dd009d1 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -96,7 +96,7 @@ obj-$(CONFIG_ARCH_SPRD) += sprd/ obj-$(CONFIG_ARCH_STI) += st/ obj-$(CONFIG_ARCH_STRATIX10) += socfpga/ obj-$(CONFIG_ARCH_SUNXI) += sunxi/ -obj-$(CONFIG_ARCH_SUNXI) += sunxi-ng/ +obj-$(CONFIG_SUNXI_CCU) += sunxi-ng/ obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-y += ti/ obj-$(CONFIG_CLK_UNIPHIER) += uniphier/ diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile index acaa14cfa25c..49454700f2e5 100644 --- a/drivers/clk/sunxi-ng/Makefile +++ b/drivers/clk/sunxi-ng/Makefile @@ -1,24 +1,24 @@ # SPDX-License-Identifier: GPL-2.0 # Common objects -lib-$(CONFIG_SUNXI_CCU) += ccu_common.o -lib-$(CONFIG_SUNXI_CCU) += ccu_mmc_timing.o -lib-$(CONFIG_SUNXI_CCU) += ccu_reset.o +obj-y += ccu_common.o +obj-y += ccu_mmc_timing.o +obj-y += ccu_reset.o # Base clock types -lib-$(CONFIG_SUNXI_CCU) += ccu_div.o -lib-$(CONFIG_SUNXI_CCU) += ccu_frac.o -lib-$(CONFIG_SUNXI_CCU) += ccu_gate.o -lib-$(CONFIG_SUNXI_CCU) += ccu_mux.o -lib-$(CONFIG_SUNXI_CCU) += ccu_mult.o -lib-$(CONFIG_SUNXI_CCU) += ccu_phase.o -lib-$(CONFIG_SUNXI_CCU) += ccu_sdm.o +obj-y += ccu_div.o +obj-y += ccu_frac.o +obj-y += ccu_gate.o +obj-y += ccu_mux.o +obj-y += ccu_mult.o +obj-y += ccu_phase.o +obj-y += ccu_sdm.o # Multi-factor clocks -lib-$(CONFIG_SUNXI_CCU) += ccu_nk.o -lib-$(CONFIG_SUNXI_CCU) += ccu_nkm.o -lib-$(CONFIG_SUNXI_CCU) += ccu_nkmp.o -lib-$(CONFIG_SUNXI_CCU) += ccu_nm.o -lib-$(CONFIG_SUNXI_CCU) += ccu_mp.o +obj-y += ccu_nk.o +obj-y += ccu_nkm.o +obj-y += ccu_nkmp.o +obj-y += ccu_nm.o +obj-y += ccu_mp.o # SoC support obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o @@ -38,12 +38,3 @@ obj-$(CONFIG_SUN8I_R40_CCU) += ccu-sun8i-r40.o obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80.o obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-de.o obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-usb.o - -# The lib-y file goals is supposed to work only in arch/*/lib or lib/. In our -# case, we want to use that goal, but even though lib.a will be properly -# generated, it will not be linked in, eventually resulting in a linker error -# for missing symbols. -# -# We can work around that by explicitly adding lib.a to the obj-y goal. This is -# an undocumented behaviour, but works well for now. -obj-$(CONFIG_SUNXI_CCU) += lib.a -- cgit v1.2.3 From 76053854f7d10ca4fa492495f65798e3d48a64c4 Mon Sep 17 00:00:00 2001 From: Gustavo Pimentel Date: Thu, 21 Jun 2018 15:06:14 +0100 Subject: ARC: [plat-hsdk] Add PCIe support Add PCI support to the ARC HSDK platform allowing to use the generic PCI setup functions. Signed-off-by: Gustavo Pimentel Acked-by: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/plat-hsdk/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig index 19ab3cf98f0f..556bc5ef1257 100644 --- a/arch/arc/plat-hsdk/Kconfig +++ b/arch/arc/plat-hsdk/Kconfig @@ -9,3 +9,4 @@ menuconfig ARC_SOC_HSDK bool "ARC HS Development Kit SOC" select CLK_HSDK select RESET_HSDK + select MIGHT_HAVE_PCI -- cgit v1.2.3 From f098631848cd9f4142b6dec7ea95baad846e1670 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Wed, 20 Jun 2018 10:02:30 +0100 Subject: Btrfs: fix physical offset reported by fiemap for inline extents Commit 9d311e11fc1f ("Btrfs: fiemap: pass correct bytenr when fm_extent_count is zero") introduced a regression where we no longer report 0 as the physical offset for inline extents (and other extents with a special block_start value). This is because it always sets the variable used to report the physical offset ("disko") as em->block_start plus some offset, and em->block_start has the value 18446744073709551614 ((u64) -2) for inline extents. This made the btrfs test 004 (from fstests) often fail, for example, for a file with an inline extent we have the following items in the subvolume tree: item 101 key (418 INODE_ITEM 0) itemoff 11029 itemsize 160 generation 25 transid 38 size 1525 nbytes 1525 block group 0 mode 100666 links 1 uid 0 gid 0 rdev 0 sequence 0 flags 0x2(none) atime 1529342058.461891730 (2018-06-18 18:14:18) ctime 1529342058.461891730 (2018-06-18 18:14:18) mtime 1529342058.461891730 (2018-06-18 18:14:18) otime 1529342055.869892885 (2018-06-18 18:14:15) item 102 key (418 INODE_REF 264) itemoff 11016 itemsize 13 index 25 namelen 3 name: fc7 item 103 key (418 EXTENT_DATA 0) itemoff 9470 itemsize 1546 generation 38 type 0 (inline) inline extent data size 1525 ram_bytes 1525 compression 0 (none) Then when test 004 invoked fiemap against the file it got a non-zero physical offset: $ filefrag -v /mnt/p0/d4/d7/fc7 Filesystem type is: 9123683e File size of /mnt/p0/d4/d7/fc7 is 1525 (1 block of 4096 bytes) ext: logical_offset: physical_offset: length: expected: flags: 0: 0.. 4095: 18446744073709551614.. 4093: 4096: last,not_aligned,inline,eof /mnt/p0/d4/d7/fc7: 1 extent found This resulted in the test failing like this: btrfs/004 49s ... [failed, exit status 1]- output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/004.out.bad) --- tests/btrfs/004.out 2016-08-23 10:17:35.027012095 +0100 +++ /home/fdmanana/git/hub/xfstests/results//btrfs/004.out.bad 2018-06-18 18:15:02.385872155 +0100 @@ -1,3 +1,10 @@ QA output created by 004 *** test backref walking -*** done +./tests/btrfs/004: line 227: [: 7.55578637259143e+22: integer expression expected +ERROR: 7.55578637259143e+22 is not a valid numeric value. +unexpected output from + /home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -s 65536 -P 7.55578637259143e+22 /home/fdmanana/btrfs-tests/scratch_1 ... (Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests/results//btrfs/004.out.bad' to see the entire diff) Ran: btrfs/004 The large number in scientific notation reported as an invalid numeric value is the result from the filter passed to perl which multiplies the physical offset by the block size reported by fiemap. So fix this by ensuring the physical offset is always set to 0 when we are processing an extent with a special block_start value. Fixes: 9d311e11fc1f ("Btrfs: fiemap: pass correct bytenr when fm_extent_count is zero") Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/extent_io.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 8e4a7cdbc9f5..1aa91d57404a 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -4545,8 +4545,11 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, offset_in_extent = em_start - em->start; em_end = extent_map_end(em); em_len = em_end - em_start; - disko = em->block_start + offset_in_extent; flags = 0; + if (em->block_start < EXTENT_MAP_LAST_BYTE) + disko = em->block_start + offset_in_extent; + else + disko = 0; /* * bump off for our next call to get_extent -- cgit v1.2.3 From 22883ddc66df402f2fbc37fe1f4d2779238e4b2d Mon Sep 17 00:00:00 2001 From: Lu Fengqi Date: Tue, 19 Jun 2018 14:54:38 +0800 Subject: btrfs: fix invalid-free in btrfs_extent_same If this condition ((BTRFS_I(src)->flags & BTRFS_INODE_NODATASUM) != (BTRFS_I(dst)->flags & BTRFS_INODE_NODATASUM)) is hit, we will go to free the uninitialized cmp.src_pages and cmp.dst_pages. Fixes: 67b07bd4bec5 ("Btrfs: reuse cmp workspace in EXTENT_SAME ioctl") Signed-off-by: Lu Fengqi Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 5556e9ea2a4b..a4d2856a4df1 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3577,7 +3577,7 @@ static int btrfs_extent_same(struct inode *src, u64 loff, u64 olen, ret = btrfs_extent_same_range(src, loff, BTRFS_MAX_DEDUPE_LEN, dst, dst_loff, &cmp); if (ret) - goto out_unlock; + goto out_free; loff += BTRFS_MAX_DEDUPE_LEN; dst_loff += BTRFS_MAX_DEDUPE_LEN; @@ -3587,16 +3587,16 @@ static int btrfs_extent_same(struct inode *src, u64 loff, u64 olen, ret = btrfs_extent_same_range(src, loff, tail_len, dst, dst_loff, &cmp); +out_free: + kvfree(cmp.src_pages); + kvfree(cmp.dst_pages); + out_unlock: if (same_inode) inode_unlock(src); else btrfs_double_inode_unlock(src, dst); -out_free: - kvfree(cmp.src_pages); - kvfree(cmp.dst_pages); - return ret; } -- cgit v1.2.3 From 9c4a665ed83462039461dd34282e22160fb447ca Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 21 Jun 2018 19:34:57 +0100 Subject: ALSA: hda/ca0132: make array ca0132_alt_chmaps static The array ca0132_alt_chmaps is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: warning: symbol 'ca0132_alt_chmaps' was not declared. Should it be static? Signed-off-by: Colin Ian King Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index d62c56feaf7d..4ff5320378e2 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -5665,7 +5665,7 @@ static const char * const ca0132_alt_slave_pfxs[] = { * I think this has to do with the pin for rear surround being 0x11, * and the center/lfe being 0x10. Usually the pin order is the opposite. */ -const struct snd_pcm_chmap_elem ca0132_alt_chmaps[] = { +static const struct snd_pcm_chmap_elem ca0132_alt_chmaps[] = { { .channels = 2, .map = { SNDRV_CHMAP_FL, SNDRV_CHMAP_FR } }, { .channels = 4, -- cgit v1.2.3 From 957f9a13df6c70aac31a1dade5e417c286d6d258 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 20 Jun 2018 11:42:45 -0700 Subject: tools: bpftool: remove duplicated error message on prog load do_pin_fd() will already print out an error message if something goes wrong. Printing another error is unnecessary and will break JSON output, since error messages are full objects: $ bpftool -jp prog load tracex1_kern.o /sys/fs/bpf/a { "error": "can't pin the object (/sys/fs/bpf/a): File exists" },{ "error": "failed to pin program" } Fixes: 49a086c201a9 ("bpftool: implement prog load command") Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Acked-by: Song Liu Signed-off-by: Daniel Borkmann --- tools/bpf/bpftool/prog.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c index 05f42a46d6ed..12b694fe0404 100644 --- a/tools/bpf/bpftool/prog.c +++ b/tools/bpf/bpftool/prog.c @@ -694,10 +694,8 @@ static int do_load(int argc, char **argv) return -1; } - if (do_pin_fd(prog_fd, argv[1])) { - p_err("failed to pin program"); + if (do_pin_fd(prog_fd, argv[1])) return -1; - } if (json_output) jsonw_null(json_wtr); -- cgit v1.2.3 From bfee71fb7376081349117fdc89f685a9e14a58c2 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 20 Jun 2018 11:42:46 -0700 Subject: tools: bpftool: remember to close the libbpf object after prog load Remembering to close all descriptors and free memory may not seem important in a user space tool like bpftool, but if we were to run in batch mode the consumed resources start to add up quickly. Make sure program load closes the libbpf object (which unloads and frees it). Fixes: 49a086c201a9 ("bpftool: implement prog load command") Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Acked-by: Song Liu Signed-off-by: Daniel Borkmann --- tools/bpf/bpftool/prog.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c index 12b694fe0404..959aa53ab678 100644 --- a/tools/bpf/bpftool/prog.c +++ b/tools/bpf/bpftool/prog.c @@ -695,12 +695,18 @@ static int do_load(int argc, char **argv) } if (do_pin_fd(prog_fd, argv[1])) - return -1; + goto err_close_obj; if (json_output) jsonw_null(json_wtr); + bpf_object__close(obj); + return 0; + +err_close_obj: + bpf_object__close(obj); + return -1; } static int do_help(int argc, char **argv) -- cgit v1.2.3 From e9893e6fa932f42c90c4ac5849fa9aa0f0f00a34 Mon Sep 17 00:00:00 2001 From: Abhishek Sahu Date: Wed, 13 Jun 2018 14:32:36 +0530 Subject: mtd: rawnand: fix return value check for bad block status Positive return value from read_oob() is making false BAD blocks. For some of the NAND controllers, OOB bytes will be protected with ECC and read_oob() will return number of bitflips. If there is any bitflip in ECC protected OOB bytes for BAD block status page, then that block is getting treated as BAD. Fixes: c120e75e0e7d ("mtd: nand: use read_oob() instead of cmdfunc() for bad block check") Cc: Signed-off-by: Abhishek Sahu Reviewed-by: Miquel Raynal Signed-off-by: Boris Brezillon --- drivers/mtd/nand/raw/nand_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index 10c4f9919850..b01d15ec4c56 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -440,7 +440,7 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs) for (; page < page_end; page++) { res = chip->ecc.read_oob(mtd, chip, page); - if (res) + if (res < 0) return res; bad = chip->oob_poi[chip->badblockpos]; -- cgit v1.2.3 From 81e167c2a216e7b54e6add9d2badcda267fe33b1 Mon Sep 17 00:00:00 2001 From: Jeffrin Jose T Date: Thu, 21 Jun 2018 22:30:20 +0530 Subject: selftests: bpf: notification about privilege required to run test_kmod.sh testing script The test_kmod.sh script require root privilege for the successful execution of the test. This patch is to notify the user about the privilege the script demands for the successful execution of the test. Signed-off-by: Jeffrin Jose T (Rajagiri SET) Signed-off-by: Daniel Borkmann --- tools/testing/selftests/bpf/test_kmod.sh | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/tools/testing/selftests/bpf/test_kmod.sh b/tools/testing/selftests/bpf/test_kmod.sh index 35669ccd4d23..9df0d2ac45f8 100755 --- a/tools/testing/selftests/bpf/test_kmod.sh +++ b/tools/testing/selftests/bpf/test_kmod.sh @@ -1,6 +1,15 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +msg="skip all tests:" +if [ "$(id -u)" != "0" ]; then + echo $msg please run this as root >&2 + exit $ksft_skip +fi + SRC_TREE=../../../../ test_run() -- cgit v1.2.3 From fe3dd97dd66bb7fb23b8077a3803d2f951e60b00 Mon Sep 17 00:00:00 2001 From: Mason Yang Date: Wed, 20 Jun 2018 11:46:30 +0200 Subject: mtd: rawnand: All AC chips have a broken GET_FEATURES(TIMINGS). Make sure we flag all broken chips as not supporting this feature. Also move this logic to a new function to keep things readable. Fixes: 34c5c01e0c8c ("mtd: rawnand: macronix: nack the support of changing timings for one chip") Cc: Signed-off-by: Mason Yang Signed-off-by: Boris Brezillon Reviewed-by: Miquel Raynal --- drivers/mtd/nand/raw/nand_macronix.c | 48 +++++++++++++++++++++++++++--------- 1 file changed, 36 insertions(+), 12 deletions(-) diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c index 7ed1f87e742a..49c546c97c6f 100644 --- a/drivers/mtd/nand/raw/nand_macronix.c +++ b/drivers/mtd/nand/raw/nand_macronix.c @@ -17,23 +17,47 @@ #include +/* + * Macronix AC series does not support using SET/GET_FEATURES to change + * the timings unlike what is declared in the parameter page. Unflag + * this feature to avoid unnecessary downturns. + */ +static void macronix_nand_fix_broken_get_timings(struct nand_chip *chip) +{ + unsigned int i; + static const char * const broken_get_timings[] = { + "MX30LF1G18AC", + "MX30LF1G28AC", + "MX30LF2G18AC", + "MX30LF2G28AC", + "MX30LF4G18AC", + "MX30LF4G28AC", + "MX60LF8G18AC", + }; + + if (!chip->parameters.supports_set_get_features) + return; + + for (i = 0; i < ARRAY_SIZE(broken_get_timings); i++) { + if (!strcmp(broken_get_timings[i], chip->parameters.model)) + break; + } + + if (i == ARRAY_SIZE(broken_get_timings)) + return; + + bitmap_clear(chip->parameters.get_feature_list, + ONFI_FEATURE_ADDR_TIMING_MODE, 1); + bitmap_clear(chip->parameters.set_feature_list, + ONFI_FEATURE_ADDR_TIMING_MODE, 1); +} + static int macronix_nand_init(struct nand_chip *chip) { if (nand_is_slc(chip)) chip->bbt_options |= NAND_BBT_SCAN2NDPAGE; - /* - * MX30LF2G18AC chip does not support using SET/GET_FEATURES to change - * the timings unlike what is declared in the parameter page. Unflag - * this feature to avoid unnecessary downturns. - */ - if (chip->parameters.supports_set_get_features && - !strcmp("MX30LF2G18AC", chip->parameters.model)) { - bitmap_clear(chip->parameters.get_feature_list, - ONFI_FEATURE_ADDR_TIMING_MODE, 1); - bitmap_clear(chip->parameters.set_feature_list, - ONFI_FEATURE_ADDR_TIMING_MODE, 1); - } + macronix_nand_fix_broken_get_timings(chip); return 0; } -- cgit v1.2.3 From 3e1a61b30c6a3a31314570c0c418a6bf84b056b1 Mon Sep 17 00:00:00 2001 From: Yonghong Song Date: Thu, 21 Jun 2018 10:02:20 -0700 Subject: tools/bpf: fix test_sockmap failure On one of our production test machine, when running bpf selftest test_sockmap, I got the following error: # sudo ./test_sockmap libbpf: failed to create map (name: 'sock_map'): Operation not permitted libbpf: failed to load object 'test_sockmap_kern.o' libbpf: Can't get the 0th fd from program sk_skb1: only -1 instances ...... load_bpf_file: (-1) Operation not permitted ERROR: (-1) load bpf failed The error is due to not-big-enough rlimit struct rlimit r = {10 * 1024 * 1024, RLIM_INFINITY}; The test already includes "bpf_rlimit.h", which sets current and max rlimit to RLIM_INFINITY. Let us just use it. Signed-off-by: Yonghong Song Signed-off-by: Daniel Borkmann --- tools/testing/selftests/bpf/test_sockmap.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/tools/testing/selftests/bpf/test_sockmap.c b/tools/testing/selftests/bpf/test_sockmap.c index 05c8cb71724a..9e78df207919 100644 --- a/tools/testing/selftests/bpf/test_sockmap.c +++ b/tools/testing/selftests/bpf/test_sockmap.c @@ -1413,18 +1413,12 @@ out: int main(int argc, char **argv) { - struct rlimit r = {10 * 1024 * 1024, RLIM_INFINITY}; int iov_count = 1, length = 1024, rate = 1; struct sockmap_options options = {0}; int opt, longindex, err, cg_fd = 0; char *bpf_file = BPF_SOCKMAP_FILENAME; int test = PING_PONG; - if (setrlimit(RLIMIT_MEMLOCK, &r)) { - perror("setrlimit(RLIMIT_MEMLOCK)"); - return 1; - } - if (argc < 2) return test_suite(); -- cgit v1.2.3 From f93aa8c4de307069c270b2d81741961162bead6c Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Wed, 6 Jun 2018 12:13:27 +0200 Subject: mtd: cfi_cmdset_0002: Use right chip in do_ppb_xxlock() do_ppb_xxlock() fails to add chip->start when querying for lock status (and chip_ready test), which caused false status reports. Fix that by adding adr += chip->start and adjust call sites accordingly. Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund Signed-off-by: Boris Brezillon --- drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index a0c655628d6d..aa09d5155429 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -2544,8 +2544,9 @@ static int __maybe_unused do_ppb_xxlock(struct map_info *map, unsigned long timeo; int ret; + adr += chip->start; mutex_lock(&chip->mutex); - ret = get_chip(map, chip, adr + chip->start, FL_LOCKING); + ret = get_chip(map, chip, adr, FL_LOCKING); if (ret) { mutex_unlock(&chip->mutex); return ret; @@ -2563,8 +2564,8 @@ static int __maybe_unused do_ppb_xxlock(struct map_info *map, if (thunk == DO_XXLOCK_ONEBLOCK_LOCK) { chip->state = FL_LOCKING; - map_write(map, CMD(0xA0), chip->start + adr); - map_write(map, CMD(0x00), chip->start + adr); + map_write(map, CMD(0xA0), adr); + map_write(map, CMD(0x00), adr); } else if (thunk == DO_XXLOCK_ONEBLOCK_UNLOCK) { /* * Unlocking of one specific sector is not supported, so we @@ -2602,7 +2603,7 @@ static int __maybe_unused do_ppb_xxlock(struct map_info *map, map_write(map, CMD(0x00), chip->start); chip->state = FL_READY; - put_chip(map, chip, adr + chip->start); + put_chip(map, chip, adr); mutex_unlock(&chip->mutex); return ret; -- cgit v1.2.3 From 5fdfc3dbad099281bf027a353d5786c09408a8e5 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Wed, 6 Jun 2018 12:13:28 +0200 Subject: mtd: cfi_cmdset_0002: fix SEGV unlocking multiple chips cfi_ppb_unlock() tries to relock all sectors that were locked before unlocking the whole chip. This locking used the chip start address + the FULL offset from the first flash chip, thereby forming an illegal address. Fix that by using the chip offset(adr). Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund Signed-off-by: Boris Brezillon --- drivers/mtd/chips/cfi_cmdset_0002.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index aa09d5155429..87f9925d25f9 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -2526,7 +2526,7 @@ static int cfi_atmel_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) struct ppb_lock { struct flchip *chip; - loff_t offset; + unsigned long adr; int locked; }; @@ -2662,7 +2662,7 @@ static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, */ if ((adr < ofs) || (adr >= (ofs + len))) { sect[sectors].chip = &cfi->chips[chipnum]; - sect[sectors].offset = offset; + sect[sectors].adr = adr; sect[sectors].locked = do_ppb_xxlock( map, &cfi->chips[chipnum], adr, 0, DO_XXLOCK_ONEBLOCK_GETLOCK); @@ -2706,7 +2706,7 @@ static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, */ for (i = 0; i < sectors; i++) { if (sect[i].locked) - do_ppb_xxlock(map, sect[i].chip, sect[i].offset, 0, + do_ppb_xxlock(map, sect[i].chip, sect[i].adr, 0, DO_XXLOCK_ONEBLOCK_LOCK); } -- cgit v1.2.3 From 0cd8116f172eed018907303dbff5c112690eeb91 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Wed, 6 Jun 2018 12:13:29 +0200 Subject: mtd: cfi_cmdset_0002: Fix unlocking requests crossing a chip boudary The "sector is in requested range" test used to determine whether sectors should be re-locked or not is done on a variable that is reset everytime we cross a chip boundary, which can lead to some blocks being re-locked while the caller expect them to be unlocked. Fix the check to make sure this cannot happen. Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund Signed-off-by: Boris Brezillon --- drivers/mtd/chips/cfi_cmdset_0002.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 87f9925d25f9..9cfc2645dd93 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -2660,7 +2660,7 @@ static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, * sectors shall be unlocked, so lets keep their locking * status at "unlocked" (locked=0) for the final re-locking. */ - if ((adr < ofs) || (adr >= (ofs + len))) { + if ((offset < ofs) || (offset >= (ofs + len))) { sect[sectors].chip = &cfi->chips[chipnum]; sect[sectors].adr = adr; sect[sectors].locked = do_ppb_xxlock( -- cgit v1.2.3 From 24bb555e6e46d96e2a954aa0295029a81cc9bbaa Mon Sep 17 00:00:00 2001 From: Aaron Ma Date: Thu, 21 Jun 2018 17:14:01 -0700 Subject: Input: elantech - enable middle button of touchpads on ThinkPad P52 PNPID is better way to identify the type of touchpads. Enable middle button support on 2 types of touchpads on Lenovo P52. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma Reviewed-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index fb4d902c4403..4c52e43c9273 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1175,6 +1175,12 @@ static const struct dmi_system_id elantech_dmi_has_middle_button[] = { { } }; +static const char * const middle_button_pnp_ids[] = { + "LEN2131", /* ThinkPad P52 w/ NFC */ + "LEN2132", /* ThinkPad P52 */ + NULL +}; + /* * Set the appropriate event bits for the input subsystem */ @@ -1194,7 +1200,8 @@ static int elantech_set_input_params(struct psmouse *psmouse) __clear_bit(EV_REL, dev->evbit); __set_bit(BTN_LEFT, dev->keybit); - if (dmi_check_system(elantech_dmi_has_middle_button)) + if (dmi_check_system(elantech_dmi_has_middle_button) || + psmouse_matches_pnp_id(psmouse, middle_button_pnp_ids)) __set_bit(BTN_MIDDLE, dev->keybit); __set_bit(BTN_RIGHT, dev->keybit); -- cgit v1.2.3 From e0ae2519ca004a628fa55aeef969c37edce522d3 Mon Sep 17 00:00:00 2001 From: ??? Date: Thu, 21 Jun 2018 17:15:32 -0700 Subject: Input: elantech - fix V4 report decoding for module with middle key Some touchpad has middle key and it will be indicated in bit 2 of packet[0]. We need to fix V4 formation's byte mask to prevent error decoding. Signed-off-by: KT Liao Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 4c52e43c9273..dd85b16dc6f8 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -799,7 +799,7 @@ static int elantech_packet_check_v4(struct psmouse *psmouse) else if (ic_version == 7 && etd->info.samples[1] == 0x2A) sanity_check = ((packet[3] & 0x1c) == 0x10); else - sanity_check = ((packet[0] & 0x0c) == 0x04 && + sanity_check = ((packet[0] & 0x08) == 0x00 && (packet[3] & 0x1c) == 0x10); if (!sanity_check) -- cgit v1.2.3 From 8938fc7b8fe9ccfa11751ead502a8d385b607967 Mon Sep 17 00:00:00 2001 From: Alexandr Savca Date: Thu, 21 Jun 2018 17:12:54 -0700 Subject: Input: elan_i2c - add ELAN0618 (Lenovo v330 15IKB) ACPI ID Add ELAN0618 to the list of supported touchpads; this ID is used in Lenovo v330 15IKB devices. Signed-off-by: Alexandr Savca Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elan_i2c_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index 8ff75114e762..f69d21610166 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -1345,6 +1345,7 @@ static const struct acpi_device_id elan_acpi_id[] = { { "ELAN060C", 0 }, { "ELAN0611", 0 }, { "ELAN0612", 0 }, + { "ELAN0618", 0 }, { "ELAN1000", 0 }, { } }; -- cgit v1.2.3 From 50fc7b61959af4b95fafce7fe5dd565199e0b61a Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 19 Jun 2018 11:17:32 -0700 Subject: Input: elan_i2c_smbus - fix more potential stack buffer overflows Commit 40f7090bb1b4 ("Input: elan_i2c_smbus - fix corrupted stack") fixed most of the functions using i2c_smbus_read_block_data() to allocate a buffer with the maximum block size. However three functions were left unchanged: * In elan_smbus_initialize(), increase the buffer size in the same way. * In elan_smbus_calibrate_result(), the buffer is provided by the caller (calibrate_store()), so introduce a bounce buffer. Also name the result buffer size. * In elan_smbus_get_report(), the buffer is provided by the caller but happens to be the right length. Add a compile-time assertion to ensure this remains the case. Cc: # 3.19+ Signed-off-by: Ben Hutchings Reviewed-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elan_i2c.h | 2 ++ drivers/input/mouse/elan_i2c_core.c | 2 +- drivers/input/mouse/elan_i2c_smbus.c | 10 ++++++++-- 3 files changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/input/mouse/elan_i2c.h b/drivers/input/mouse/elan_i2c.h index 599544c1a91c..243e0fa6e3e3 100644 --- a/drivers/input/mouse/elan_i2c.h +++ b/drivers/input/mouse/elan_i2c.h @@ -27,6 +27,8 @@ #define ETP_DISABLE_POWER 0x0001 #define ETP_PRESSURE_OFFSET 25 +#define ETP_CALIBRATE_MAX_LEN 3 + /* IAP Firmware handling */ #define ETP_PRODUCT_ID_FORMAT_STRING "%d.0" #define ETP_FW_NAME "elan_i2c_" ETP_PRODUCT_ID_FORMAT_STRING ".bin" diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index f69d21610166..1f9cd7d8b7ad 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -613,7 +613,7 @@ static ssize_t calibrate_store(struct device *dev, int tries = 20; int retval; int error; - u8 val[3]; + u8 val[ETP_CALIBRATE_MAX_LEN]; retval = mutex_lock_interruptible(&data->sysfs_mutex); if (retval) diff --git a/drivers/input/mouse/elan_i2c_smbus.c b/drivers/input/mouse/elan_i2c_smbus.c index cfcb32559925..c060d270bc4d 100644 --- a/drivers/input/mouse/elan_i2c_smbus.c +++ b/drivers/input/mouse/elan_i2c_smbus.c @@ -56,7 +56,7 @@ static int elan_smbus_initialize(struct i2c_client *client) { u8 check[ETP_SMBUS_HELLOPACKET_LEN] = { 0x55, 0x55, 0x55, 0x55, 0x55 }; - u8 values[ETP_SMBUS_HELLOPACKET_LEN] = { 0, 0, 0, 0, 0 }; + u8 values[I2C_SMBUS_BLOCK_MAX] = {0}; int len, error; /* Get hello packet */ @@ -117,12 +117,16 @@ static int elan_smbus_calibrate(struct i2c_client *client) static int elan_smbus_calibrate_result(struct i2c_client *client, u8 *val) { int error; + u8 buf[I2C_SMBUS_BLOCK_MAX] = {0}; + + BUILD_BUG_ON(ETP_CALIBRATE_MAX_LEN > sizeof(buf)); error = i2c_smbus_read_block_data(client, - ETP_SMBUS_CALIBRATE_QUERY, val); + ETP_SMBUS_CALIBRATE_QUERY, buf); if (error < 0) return error; + memcpy(val, buf, ETP_CALIBRATE_MAX_LEN); return 0; } @@ -472,6 +476,8 @@ static int elan_smbus_get_report(struct i2c_client *client, u8 *report) { int len; + BUILD_BUG_ON(I2C_SMBUS_BLOCK_MAX > ETP_SMBUS_REPORT_LEN); + len = i2c_smbus_read_block_data(client, ETP_SMBUS_PACKET_QUERY, &report[ETP_SMBUS_REPORT_OFFSET]); -- cgit v1.2.3 From dd6bee81c942c0ea01030da9356026afb88f9d18 Mon Sep 17 00:00:00 2001 From: Enno Boland Date: Tue, 19 Jun 2018 11:55:33 -0700 Subject: Input: xpad - fix GPD Win 2 controller name This fixes using the controller with SDL2. SDL2 has a naive algorithm to apply the correct settings to a controller. For X-Box compatible controllers it expects that the controller name contains a variation of a 'XBOX'-string. This patch changes the identifier to contain "X-Box" as substring. Tested with Steam and C-Dogs-SDL which both detect the controller properly after adding this patch. Fixes: c1ba08390a8b ("Input: xpad - add GPD Win 2 Controller USB IDs") Cc: stable@vger.kernel.org Signed-off-by: Enno Boland Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 48e36acbeb49..cd620e009bad 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -125,7 +125,7 @@ static const struct xpad_device { u8 mapping; u8 xtype; } xpad_device[] = { - { 0x0079, 0x18d4, "GPD Win 2 Controller", 0, XTYPE_XBOX360 }, + { 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 }, { 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX }, { 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX }, { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX }, -- cgit v1.2.3 From e2ac836307e346969737c60075fdb01bed1af503 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 21 Jun 2018 23:24:38 -0700 Subject: xfs: simplify xfs_bmap_punch_delalloc_range Instead of using xfs_bmapi_read to find delalloc extents and then punch them out using xfs_bunmapi, opencode the loop to iterate over the extents and call xfs_bmap_del_extent_delay directly. This both simplifies the code and reduces the number of extent tree lookups required. Signed-off-by: Christoph Hellwig Reviewed-by: Brian Foster Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_bmap_util.c | 85 +++++++++++++++++++------------------------------- 1 file changed, 32 insertions(+), 53 deletions(-) diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c index c35009a86699..c195b9d857af 100644 --- a/fs/xfs/xfs_bmap_util.c +++ b/fs/xfs/xfs_bmap_util.c @@ -685,12 +685,10 @@ out_unlock_iolock: } /* - * dead simple method of punching delalyed allocation blocks from a range in - * the inode. Walks a block at a time so will be slow, but is only executed in - * rare error cases so the overhead is not critical. This will always punch out - * both the start and end blocks, even if the ranges only partially overlap - * them, so it is up to the caller to ensure that partial blocks are not - * passed in. + * Dead simple method of punching delalyed allocation blocks from a range in + * the inode. This will always punch out both the start and end blocks, even + * if the ranges only partially overlap them, so it is up to the caller to + * ensure that partial blocks are not passed in. */ int xfs_bmap_punch_delalloc_range( @@ -698,63 +696,44 @@ xfs_bmap_punch_delalloc_range( xfs_fileoff_t start_fsb, xfs_fileoff_t length) { - xfs_fileoff_t remaining = length; + struct xfs_ifork *ifp = &ip->i_df; + xfs_fileoff_t end_fsb = start_fsb + length; + struct xfs_bmbt_irec got, del; + struct xfs_iext_cursor icur; int error = 0; ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL)); - do { - int done; - xfs_bmbt_irec_t imap; - int nimaps = 1; - xfs_fsblock_t firstblock; - struct xfs_defer_ops dfops; + if (!(ifp->if_flags & XFS_IFEXTENTS)) { + error = xfs_iread_extents(NULL, ip, XFS_DATA_FORK); + if (error) + return error; + } - /* - * Map the range first and check that it is a delalloc extent - * before trying to unmap the range. Otherwise we will be - * trying to remove a real extent (which requires a - * transaction) or a hole, which is probably a bad idea... - */ - error = xfs_bmapi_read(ip, start_fsb, 1, &imap, &nimaps, - XFS_BMAPI_ENTIRE); + if (!xfs_iext_lookup_extent_before(ip, ifp, &end_fsb, &icur, &got)) + return 0; - if (error) { - /* something screwed, just bail */ - if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) { - xfs_alert(ip->i_mount, - "Failed delalloc mapping lookup ino %lld fsb %lld.", - ip->i_ino, start_fsb); - } - break; - } - if (!nimaps) { - /* nothing there */ - goto next_block; - } - if (imap.br_startblock != DELAYSTARTBLOCK) { - /* been converted, ignore */ - goto next_block; - } - WARN_ON(imap.br_blockcount == 0); + while (got.br_startoff + got.br_blockcount > start_fsb) { + del = got; + xfs_trim_extent(&del, start_fsb, length); /* - * Note: while we initialise the firstblock/dfops pair, they - * should never be used because blocks should never be - * allocated or freed for a delalloc extent and hence we need - * don't cancel or finish them after the xfs_bunmapi() call. + * A delete can push the cursor forward. Step back to the + * previous extent on non-delalloc or extents outside the + * target range. */ - xfs_defer_init(&dfops, &firstblock); - error = xfs_bunmapi(NULL, ip, start_fsb, 1, 0, 1, &firstblock, - &dfops, &done); - if (error) - break; + if (!del.br_blockcount || + !isnullstartblock(del.br_startblock)) { + if (!xfs_iext_prev_extent(ifp, &icur, &got)) + break; + continue; + } - ASSERT(!xfs_defer_has_unfinished_work(&dfops)); -next_block: - start_fsb++; - remaining--; - } while(remaining > 0); + error = xfs_bmap_del_extent_delay(ip, XFS_DATA_FORK, &icur, + &got, &del); + if (error || !xfs_iext_get_extent(ifp, &icur, &got)) + break; + } return error; } -- cgit v1.2.3 From 23fcb3340d033d9f081e21e6c12c2db7eaa541d3 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 21 Jun 2018 23:25:57 -0700 Subject: xfs: More robust inode extent count validation When the inode is in extent format, it can't have more extents that fit in the inode fork. We don't currenty check this, and so this corruption goes unnoticed by the inode verifiers. This can lead to crashes operating on invalid in-memory structures. Attempts to access such a inode will now error out in the verifier rather than allowing modification operations to proceed. Reported-by: Wen Xu Signed-off-by: Dave Chinner Reviewed-by: Darrick J. Wong [darrick: fix a typedef, add some braces and breaks to shut up compiler warnings] Signed-off-by: Darrick J. Wong --- fs/xfs/libxfs/xfs_format.h | 3 ++ fs/xfs/libxfs/xfs_inode_buf.c | 76 ++++++++++++++++++++++++++----------------- 2 files changed, 50 insertions(+), 29 deletions(-) diff --git a/fs/xfs/libxfs/xfs_format.h b/fs/xfs/libxfs/xfs_format.h index 1c5a8aaf2bfc..7b4a43deb83e 100644 --- a/fs/xfs/libxfs/xfs_format.h +++ b/fs/xfs/libxfs/xfs_format.h @@ -962,6 +962,9 @@ typedef enum xfs_dinode_fmt { XFS_DFORK_DSIZE(dip, mp) : \ XFS_DFORK_ASIZE(dip, mp)) +#define XFS_DFORK_MAXEXT(dip, mp, w) \ + (XFS_DFORK_SIZE(dip, mp, w) / sizeof(struct xfs_bmbt_rec)) + /* * Return pointers to the data or attribute forks. */ diff --git a/fs/xfs/libxfs/xfs_inode_buf.c b/fs/xfs/libxfs/xfs_inode_buf.c index d38d724534c4..33dc34655ac3 100644 --- a/fs/xfs/libxfs/xfs_inode_buf.c +++ b/fs/xfs/libxfs/xfs_inode_buf.c @@ -374,6 +374,47 @@ xfs_log_dinode_to_disk( } } +static xfs_failaddr_t +xfs_dinode_verify_fork( + struct xfs_dinode *dip, + struct xfs_mount *mp, + int whichfork) +{ + uint32_t di_nextents = XFS_DFORK_NEXTENTS(dip, whichfork); + + switch (XFS_DFORK_FORMAT(dip, whichfork)) { + case XFS_DINODE_FMT_LOCAL: + /* + * no local regular files yet + */ + if (whichfork == XFS_DATA_FORK) { + if (S_ISREG(be16_to_cpu(dip->di_mode))) + return __this_address; + if (be64_to_cpu(dip->di_size) > + XFS_DFORK_SIZE(dip, mp, whichfork)) + return __this_address; + } + if (di_nextents) + return __this_address; + break; + case XFS_DINODE_FMT_EXTENTS: + if (di_nextents > XFS_DFORK_MAXEXT(dip, mp, whichfork)) + return __this_address; + break; + case XFS_DINODE_FMT_BTREE: + if (whichfork == XFS_ATTR_FORK) { + if (di_nextents > MAXAEXTNUM) + return __this_address; + } else if (di_nextents > MAXEXTNUM) { + return __this_address; + } + break; + default: + return __this_address; + } + return NULL; +} + xfs_failaddr_t xfs_dinode_verify( struct xfs_mount *mp, @@ -441,24 +482,9 @@ xfs_dinode_verify( case S_IFREG: case S_IFLNK: case S_IFDIR: - switch (dip->di_format) { - case XFS_DINODE_FMT_LOCAL: - /* - * no local regular files yet - */ - if (S_ISREG(mode)) - return __this_address; - if (di_size > XFS_DFORK_DSIZE(dip, mp)) - return __this_address; - if (dip->di_nextents) - return __this_address; - /* fall through */ - case XFS_DINODE_FMT_EXTENTS: - case XFS_DINODE_FMT_BTREE: - break; - default: - return __this_address; - } + fa = xfs_dinode_verify_fork(dip, mp, XFS_DATA_FORK); + if (fa) + return fa; break; case 0: /* Uninitialized inode ok. */ @@ -468,17 +494,9 @@ xfs_dinode_verify( } if (XFS_DFORK_Q(dip)) { - switch (dip->di_aformat) { - case XFS_DINODE_FMT_LOCAL: - if (dip->di_anextents) - return __this_address; - /* fall through */ - case XFS_DINODE_FMT_EXTENTS: - case XFS_DINODE_FMT_BTREE: - break; - default: - return __this_address; - } + fa = xfs_dinode_verify_fork(dip, mp, XFS_ATTR_FORK); + if (fa) + return fa; } else { /* * If there is no fork offset, this may be a freshly-made inode -- cgit v1.2.3 From e53946dbd31a21f4bef155f8febba556933d62bf Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 21 Jun 2018 23:26:05 -0700 Subject: xfs: xfs_iflush_abort() can be called twice on cluster writeback failure When a corrupt inode is detected during xfs_iflush_cluster, we can get a shutdown ASSERT failure like this: XFS (pmem1): Metadata corruption detected at xfs_symlink_shortform_verify+0x5c/0xa0, inode 0x86627 data fork XFS (pmem1): Unmount and run xfs_repair XFS (pmem1): xfs_do_force_shutdown(0x8) called from line 3372 of file fs/xfs/xfs_inode.c. Return address = ffffffff814f4116 XFS (pmem1): Corruption of in-memory data detected. Shutting down filesystem XFS (pmem1): xfs_do_force_shutdown(0x1) called from line 222 of file fs/xfs/libxfs/xfs_defer.c. Return address = ffffffff814a8a88 XFS (pmem1): xfs_do_force_shutdown(0x1) called from line 222 of file fs/xfs/libxfs/xfs_defer.c. Return address = ffffffff814a8ef9 XFS (pmem1): Please umount the filesystem and rectify the problem(s) XFS: Assertion failed: xfs_isiflocked(ip), file: fs/xfs/xfs_inode.h, line: 258 ..... Call Trace: xfs_iflush_abort+0x10a/0x110 xfs_iflush+0xf3/0x390 xfs_inode_item_push+0x126/0x1e0 xfsaild+0x2c5/0x890 kthread+0x11c/0x140 ret_from_fork+0x24/0x30 Essentially, xfs_iflush_abort() has been called twice on the original inode that that was flushed. This happens because the inode has been flushed to teh buffer successfully via xfs_iflush_int(), and so when another inode is detected as corrupt in xfs_iflush_cluster, the buffer is marked stale and EIO, and iodone callbacks are run on it. Running the iodone callbacks walks across the original inode and calls xfs_iflush_abort() on it. When xfs_iflush_cluster() returns to xfs_iflush(), it runs the error path for that function, and that calls xfs_iflush_abort() on the inode a second time, leading to the above assert failure as the inode is not flush locked anymore. This bug has been there a long time. The simple fix would be to just avoid calling xfs_iflush_abort() in xfs_iflush() if we've got a failure from xfs_iflush_cluster(). However, xfs_iflush_cluster() has magic delwri buffer handling that means it may or may not have run IO completion on the buffer, and hence sometimes we have to call xfs_iflush_abort() from xfs_iflush(), and sometimes we shouldn't. After reading through all the error paths and the delwri buffer code, it's clear that the error handling in xfs_iflush_cluster() is unnecessary. If the buffer is delwri, it leaves it on the delwri list so that when the delwri list is submitted it sees a shutdown fliesystem in xfs_buf_submit() and that marks the buffer stale, EIO and runs IO completion. i.e. exactly what xfs+iflush_cluster() does when it's not a delwri buffer. Further, marking a buffer stale clears the _XBF_DELWRI_Q flag on the buffer, which means when submission of the buffer occurs, it just skips over it and releases it. IOWs, the error handling in xfs_iflush_cluster doesn't need to care if the buffer is already on a the delwri queue or not - it just needs to mark the buffer stale, EIO and run completions. That means we can just use the easy fix for xfs_iflush() to avoid the double abort. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_inode.c | 57 ++++++++++++++++++++---------------------------------- 1 file changed, 21 insertions(+), 36 deletions(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 7a96c4e0ab5c..5df4de666cc1 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -3236,7 +3236,6 @@ xfs_iflush_cluster( struct xfs_inode *cip; int nr_found; int clcount = 0; - int bufwasdelwri; int i; pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ip->i_ino)); @@ -3360,37 +3359,22 @@ cluster_corrupt_out: * inode buffer and shut down the filesystem. */ rcu_read_unlock(); - /* - * Clean up the buffer. If it was delwri, just release it -- - * brelse can handle it with no problems. If not, shut down the - * filesystem before releasing the buffer. - */ - bufwasdelwri = (bp->b_flags & _XBF_DELWRI_Q); - if (bufwasdelwri) - xfs_buf_relse(bp); - xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE); - if (!bufwasdelwri) { - /* - * Just like incore_relse: if we have b_iodone functions, - * mark the buffer as an error and call them. Otherwise - * mark it as stale and brelse. - */ - if (bp->b_iodone) { - bp->b_flags &= ~XBF_DONE; - xfs_buf_stale(bp); - xfs_buf_ioerror(bp, -EIO); - xfs_buf_ioend(bp); - } else { - xfs_buf_stale(bp); - xfs_buf_relse(bp); - } - } - /* - * Unlocks the flush lock + * We'll always have an inode attached to the buffer for completion + * process by the time we are called from xfs_iflush(). Hence we have + * always need to do IO completion processing to abort the inodes + * attached to the buffer. handle them just like the shutdown case in + * xfs_buf_submit(). */ + ASSERT(bp->b_iodone); + bp->b_flags &= ~XBF_DONE; + xfs_buf_stale(bp); + xfs_buf_ioerror(bp, -EIO); + xfs_buf_ioend(bp); + + /* abort the corrupt inode, as it was not attached to the buffer */ xfs_iflush_abort(cip, false); kmem_free(cilist); xfs_perag_put(pag); @@ -3486,12 +3470,17 @@ xfs_iflush( xfs_log_force(mp, 0); /* - * inode clustering: - * see if other inodes can be gathered into this write + * inode clustering: try to gather other inodes into this write + * + * Note: Any error during clustering will result in the filesystem + * being shut down and completion callbacks run on the cluster buffer. + * As we have already flushed and attached this inode to the buffer, + * it has already been aborted and released by xfs_iflush_cluster() and + * so we have no further error handling to do here. */ error = xfs_iflush_cluster(ip, bp); if (error) - goto cluster_corrupt_out; + return error; *bpp = bp; return 0; @@ -3500,12 +3489,8 @@ corrupt_out: if (bp) xfs_buf_relse(bp); xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE); -cluster_corrupt_out: - error = -EFSCORRUPTED; abort_out: - /* - * Unlocks the flush lock - */ + /* abort the corrupt inode, as it was not attached to the buffer */ xfs_iflush_abort(ip, false); return error; } -- cgit v1.2.3 From f1ce87f6080b1dda7e7b1eda3da332add19d87b9 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Wed, 6 Jun 2018 12:13:30 +0200 Subject: mtd: cfi_cmdset_0002: Avoid walking all chips when unlocking. cfi_ppb_unlock() walks all flash chips when unlocking sectors, avoid walking chips unaffected by the unlock operation. Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund Signed-off-by: Boris Brezillon --- drivers/mtd/chips/cfi_cmdset_0002.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 9cfc2645dd93..1b64ac8c5bc8 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -2676,6 +2676,8 @@ static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, i++; if (adr >> cfi->chipshift) { + if (offset >= (ofs + len)) + break; adr = 0; chipnum++; -- cgit v1.2.3 From cbdceb9b3e1928554fffd0d889adf2d0d8edee4d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 22 Jun 2018 09:04:25 +0200 Subject: mtd: dataflash: Use ULL suffix for 64-bit constants MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With gcc 4.1.2 when compiling for 32-bit: drivers/mtd/devices/mtd_dataflash.c:736: warning: integer constant is too large for ‘long’ type drivers/mtd/devices/mtd_dataflash.c:737: warning: integer constant is too large for ‘long’ type Add the missing "ULL" suffixes to fix this. Fixes: 67e4145ebf2c161d ("mtd: dataflash: Add flash_info for AT45DB641E") Signed-off-by: Geert Uytterhoeven Acked-by: Andrey Smirnov Signed-off-by: Boris Brezillon --- drivers/mtd/devices/mtd_dataflash.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 3a6f450d1093..53febe8a68c3 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -733,8 +733,8 @@ static struct flash_info dataflash_data[] = { { "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS}, { "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS}, - { "AT45DB641E", 0x1f28000100, 32768, 264, 9, SUP_EXTID | SUP_POW2PS}, - { "at45db641e", 0x1f28000100, 32768, 256, 8, SUP_EXTID | SUP_POW2PS | IS_POW2PS}, + { "AT45DB641E", 0x1f28000100ULL, 32768, 264, 9, SUP_EXTID | SUP_POW2PS}, + { "at45db641e", 0x1f28000100ULL, 32768, 256, 8, SUP_EXTID | SUP_POW2PS | IS_POW2PS}, }; static struct flash_info *jedec_lookup(struct spi_device *spi, -- cgit v1.2.3 From 275ec0cb946cb75ac8977f662e608fce92f8b8a8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 22 Jun 2018 12:17:45 +0200 Subject: ALSA: hda/realtek - Add a quirk for FSC ESPRIMO U9210 Fujitsu Seimens ESPRIMO Mobile U9210 requires the same fixup as H270 for the correct pin configs. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200107 Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 487ceb9fd038..70bf4c30548a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2545,6 +2545,7 @@ static const struct snd_pci_quirk alc262_fixup_tbl[] = { SND_PCI_QUIRK(0x10cf, 0x1397, "Fujitsu Lifebook S7110", ALC262_FIXUP_FSC_S7110), SND_PCI_QUIRK(0x10cf, 0x142d, "Fujitsu Lifebook E8410", ALC262_FIXUP_BENQ), SND_PCI_QUIRK(0x10f1, 0x2915, "Tyan Thunder n6650W", ALC262_FIXUP_TYAN), + SND_PCI_QUIRK(0x1734, 0x1141, "FSC ESPRIMO U9210", ALC262_FIXUP_FSC_H270), SND_PCI_QUIRK(0x1734, 0x1147, "FSC Celsius H270", ALC262_FIXUP_FSC_H270), SND_PCI_QUIRK(0x17aa, 0x384e, "Lenovo 3000", ALC262_FIXUP_LENOVO_3000), SND_PCI_QUIRK(0x17ff, 0x0560, "Benq ED8", ALC262_FIXUP_BENQ), -- cgit v1.2.3 From c5b4a50b74018b3677098151ec5f4fce07d5e6a0 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 11 Jun 2018 19:24:16 +0100 Subject: Btrfs: fix return value on rename exchange failure If we failed during a rename exchange operation after starting/joining a transaction, we would end up replacing the return value, stored in the local 'ret' variable, with the return value from btrfs_end_transaction(). So this could end up returning 0 (success) to user space despite the operation having failed and aborted the transaction, because if there are multiple tasks having a reference on the transaction at the time btrfs_end_transaction() is called by the rename exchange, that function returns 0 (otherwise it returns -EIO and not the original error value). So fix this by not overwriting the return value on error after getting a transaction handle. Fixes: cdd1fedf8261 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT") CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/inode.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index c12b7a6e534a..a6bf9e2ff68f 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -9443,6 +9443,7 @@ static int btrfs_rename_exchange(struct inode *old_dir, u64 new_idx = 0; u64 root_objectid; int ret; + int ret2; bool root_log_pinned = false; bool dest_log_pinned = false; @@ -9639,7 +9640,8 @@ out_fail: dest_log_pinned = false; } } - ret = btrfs_end_transaction(trans); + ret2 = btrfs_end_transaction(trans); + ret = ret ? ret : ret2; out_notrans: if (new_ino == BTRFS_FIRST_FREE_OBJECTID) up_read(&fs_info->subvol_sem); -- cgit v1.2.3 From 3f6e6986045d47f87bd982910821b7ab9758487e Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 23 Jun 2018 01:06:34 +0900 Subject: mtd: rawnand: denali_dt: set clk_x_rate to 200 MHz unconditionally Since commit 1bb88666775e ("mtd: nand: denali: handle timing parameters by setup_data_interface()"), denali_dt.c gets the clock rate from the clock driver. The driver expects the frequency of the bus interface clock, whereas the clock driver of SOCFPGA provides the core clock. Thus, the setup_data_interface() hook calculates timing parameters based on a wrong frequency. To make it work without relying on the clock driver, hard-code the clock frequency, 200MHz. This is fine for existing DT of UniPhier, and also fixes the issue of SOCFPGA because both platforms use 200 MHz for the bus interface clock. Fixes: 1bb88666775e ("mtd: nand: denali: handle timing parameters by setup_data_interface()") Cc: linux-stable #4.14+ Reported-by: Philipp Rosenberger Suggested-by: Boris Brezillon Signed-off-by: Masahiro Yamada Tested-by: Richard Weinberger Signed-off-by: Boris Brezillon --- drivers/mtd/nand/raw/denali_dt.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/denali_dt.c b/drivers/mtd/nand/raw/denali_dt.c index cfd33e6ca77f..5869e90cc14b 100644 --- a/drivers/mtd/nand/raw/denali_dt.c +++ b/drivers/mtd/nand/raw/denali_dt.c @@ -123,7 +123,11 @@ static int denali_dt_probe(struct platform_device *pdev) if (ret) return ret; - denali->clk_x_rate = clk_get_rate(dt->clk); + /* + * Hardcode the clock rate for the backward compatibility. + * This works for both SOCFPGA and UniPhier. + */ + denali->clk_x_rate = 200000000; ret = denali_init(denali); if (ret) -- cgit v1.2.3 From f21c601a2bb319ec19eb4562eadc7797d90fd90e Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Fri, 15 Jun 2018 09:35:33 -0400 Subject: dm: use bio_split() when splitting out the already processed bio Use of bio_clone_bioset() is inefficient if there is no need to clone the original bio's bio_vec array. Best to use the bio_clone_fast() variant. Also, just using bio_advance() is only part of what is needed to properly setup the clone -- it doesn't account for the various bio_integrity() related work that also needs to be performed (see bio_split). Address both of these issues by switching from bio_clone_bioset() to bio_split(). Fixes: 18a25da8 ("dm: ensure bio submission follows a depth-first tree walk") Cc: stable@vger.kernel.org # 4.15+, requires removal of '&' before md->queue->bio_split Reported-by: Christoph Hellwig Reviewed-by: NeilBrown Signed-off-by: Mike Snitzer --- drivers/md/dm.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index e65429a29c06..a3b103e8e3ce 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1606,10 +1606,9 @@ static blk_qc_t __split_and_process_bio(struct mapped_device *md, * the usage of io->orig_bio in dm_remap_zone_report() * won't be affected by this reassignment. */ - struct bio *b = bio_clone_bioset(bio, GFP_NOIO, - &md->queue->bio_split); + struct bio *b = bio_split(bio, bio_sectors(bio) - ci.sector_count, + GFP_NOIO, &md->queue->bio_split); ci.io->orig_bio = b; - bio_advance(bio, (bio_sectors(bio) - ci.sector_count) << 9); bio_chain(b, bio); ret = generic_make_request(bio); break; -- cgit v1.2.3 From 7ccdbf85d3b2237cdbdafe6a47673dbdfab4b7a2 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Mon, 18 Jun 2018 11:57:51 -0400 Subject: dm thin metadata: remove needless work from __commit_transaction Commit 5a32083d03fb5 ("dm: take care to copy the space map roots before locking the superblock") properly removed the calls to dm_sm_root_size() from __write_initial_superblock(). But the dm_sm_root_size() calls were left dangling in __commit_transaction(). Fixes: 5a32083d03fb5 ("dm: take care to copy the space map roots before locking the superblock") Signed-off-by: Mike Snitzer --- drivers/md/dm-thin-metadata.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index 36ef284ad086..72142021b5c9 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -776,7 +776,6 @@ static int __write_changed_details(struct dm_pool_metadata *pmd) static int __commit_transaction(struct dm_pool_metadata *pmd) { int r; - size_t metadata_len, data_len; struct thin_disk_superblock *disk_super; struct dm_block *sblock; @@ -797,14 +796,6 @@ static int __commit_transaction(struct dm_pool_metadata *pmd) if (r < 0) return r; - r = dm_sm_root_size(pmd->metadata_sm, &metadata_len); - if (r < 0) - return r; - - r = dm_sm_root_size(pmd->data_sm, &data_len); - if (r < 0) - return r; - r = save_sm_roots(pmd); if (r < 0) return r; -- cgit v1.2.3 From 50a7d3ba7c9ac5e0b7e03fc7f420180989361dbf Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Mon, 18 Jun 2018 10:50:33 -0700 Subject: dm writecache: use 2-factor allocator arguments This adjusts the allocator calls to use the 2-factor argument style, as already done treewide for better defense against allocator overflows. Signed-off-by: Kees Cook [snitzer: tweaked code to leave assignment in a test alone] Signed-off-by: Mike Snitzer --- drivers/md/dm-writecache.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/md/dm-writecache.c b/drivers/md/dm-writecache.c index 5961c7794ef3..07ea6a48aac6 100644 --- a/drivers/md/dm-writecache.c +++ b/drivers/md/dm-writecache.c @@ -259,7 +259,7 @@ static int persistent_memory_claim(struct dm_writecache *wc) if (da != p) { long i; wc->memory_map = NULL; - pages = kvmalloc(p * sizeof(struct page *), GFP_KERNEL); + pages = kvmalloc_array(p, sizeof(struct page *), GFP_KERNEL); if (!pages) { r = -ENOMEM; goto err2; @@ -859,7 +859,7 @@ static int writecache_alloc_entries(struct dm_writecache *wc) if (wc->entries) return 0; - wc->entries = vmalloc(sizeof(struct wc_entry) * wc->n_blocks); + wc->entries = vmalloc(array_size(sizeof(struct wc_entry), wc->n_blocks)); if (!wc->entries) return -ENOMEM; for (b = 0; b < wc->n_blocks; b++) { @@ -1481,9 +1481,9 @@ static void __writecache_writeback_pmem(struct dm_writecache *wc, struct writeba wb->bio.bi_iter.bi_sector = read_original_sector(wc, e); wb->page_offset = PAGE_SIZE; if (max_pages <= WB_LIST_INLINE || - unlikely(!(wb->wc_list = kmalloc(max_pages * sizeof(struct wc_entry *), - GFP_NOIO | __GFP_NORETRY | - __GFP_NOMEMALLOC | __GFP_NOWARN)))) { + unlikely(!(wb->wc_list = kmalloc_array(max_pages, sizeof(struct wc_entry *), + GFP_NOIO | __GFP_NORETRY | + __GFP_NOMEMALLOC | __GFP_NOWARN)))) { wb->wc_list = wb->wc_list_inline; max_pages = WB_LIST_INLINE; } -- cgit v1.2.3 From 2d0b2d64d325e22939d9db3ba784f1236459ed98 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 22 Jun 2018 08:09:11 -0700 Subject: dm zoned: avoid triggering reclaim from inside dmz_map() This patch avoids that lockdep reports the following: ====================================================== WARNING: possible circular locking dependency detected 4.18.0-rc1 #62 Not tainted ------------------------------------------------------ kswapd0/84 is trying to acquire lock: 00000000c313516d (&xfs_nondir_ilock_class){++++}, at: xfs_free_eofblocks+0xa2/0x1e0 but task is already holding lock: 00000000591c83ae (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (fs_reclaim){+.+.}: kmem_cache_alloc+0x2c/0x2b0 radix_tree_node_alloc.constprop.19+0x3d/0xc0 __radix_tree_create+0x161/0x1c0 __radix_tree_insert+0x45/0x210 dmz_map+0x245/0x2d0 [dm_zoned] __map_bio+0x40/0x260 __split_and_process_non_flush+0x116/0x220 __split_and_process_bio+0x81/0x180 __dm_make_request.isra.32+0x5a/0x100 generic_make_request+0x36e/0x690 submit_bio+0x6c/0x140 mpage_readpages+0x19e/0x1f0 read_pages+0x6d/0x1b0 __do_page_cache_readahead+0x21b/0x2d0 force_page_cache_readahead+0xc4/0x100 generic_file_read_iter+0x7c6/0xd20 __vfs_read+0x102/0x180 vfs_read+0x9b/0x140 ksys_read+0x55/0xc0 do_syscall_64+0x5a/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #1 (&dmz->chunk_lock){+.+.}: dmz_map+0x133/0x2d0 [dm_zoned] __map_bio+0x40/0x260 __split_and_process_non_flush+0x116/0x220 __split_and_process_bio+0x81/0x180 __dm_make_request.isra.32+0x5a/0x100 generic_make_request+0x36e/0x690 submit_bio+0x6c/0x140 _xfs_buf_ioapply+0x31c/0x590 xfs_buf_submit_wait+0x73/0x520 xfs_buf_read_map+0x134/0x2f0 xfs_trans_read_buf_map+0xc3/0x580 xfs_read_agf+0xa5/0x1e0 xfs_alloc_read_agf+0x59/0x2b0 xfs_alloc_pagf_init+0x27/0x60 xfs_bmap_longest_free_extent+0x43/0xb0 xfs_bmap_btalloc_nullfb+0x7f/0xf0 xfs_bmap_btalloc+0x428/0x7c0 xfs_bmapi_write+0x598/0xcc0 xfs_iomap_write_allocate+0x15a/0x330 xfs_map_blocks+0x1cf/0x3f0 xfs_do_writepage+0x15f/0x7b0 write_cache_pages+0x1ca/0x540 xfs_vm_writepages+0x65/0xa0 do_writepages+0x48/0xf0 __writeback_single_inode+0x58/0x730 writeback_sb_inodes+0x249/0x5c0 wb_writeback+0x11e/0x550 wb_workfn+0xa3/0x670 process_one_work+0x228/0x670 worker_thread+0x3c/0x390 kthread+0x11c/0x140 ret_from_fork+0x3a/0x50 -> #0 (&xfs_nondir_ilock_class){++++}: down_read_nested+0x43/0x70 xfs_free_eofblocks+0xa2/0x1e0 xfs_fs_destroy_inode+0xac/0x270 dispose_list+0x51/0x80 prune_icache_sb+0x52/0x70 super_cache_scan+0x127/0x1a0 shrink_slab.part.47+0x1bd/0x590 shrink_node+0x3b5/0x470 balance_pgdat+0x158/0x3b0 kswapd+0x1ba/0x600 kthread+0x11c/0x140 ret_from_fork+0x3a/0x50 other info that might help us debug this: Chain exists of: &xfs_nondir_ilock_class --> &dmz->chunk_lock --> fs_reclaim Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(&dmz->chunk_lock); lock(fs_reclaim); lock(&xfs_nondir_ilock_class); *** DEADLOCK *** 3 locks held by kswapd0/84: #0: 00000000591c83ae (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 #1: 000000000f8208f5 (shrinker_rwsem){++++}, at: shrink_slab.part.47+0x3f/0x590 #2: 00000000cacefa54 (&type->s_umount_key#43){.+.+}, at: trylock_super+0x16/0x50 stack backtrace: CPU: 7 PID: 84 Comm: kswapd0 Not tainted 4.18.0-rc1 #62 Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0 12/17/2015 Call Trace: dump_stack+0x85/0xcb print_circular_bug.isra.36+0x1ce/0x1db __lock_acquire+0x124e/0x1310 lock_acquire+0x9f/0x1f0 down_read_nested+0x43/0x70 xfs_free_eofblocks+0xa2/0x1e0 xfs_fs_destroy_inode+0xac/0x270 dispose_list+0x51/0x80 prune_icache_sb+0x52/0x70 super_cache_scan+0x127/0x1a0 shrink_slab.part.47+0x1bd/0x590 shrink_node+0x3b5/0x470 balance_pgdat+0x158/0x3b0 kswapd+0x1ba/0x600 kthread+0x11c/0x140 ret_from_fork+0x3a/0x50 Reported-by: Masato Suzuki Fixes: 4218a9554653 ("dm zoned: use GFP_NOIO in I/O path") Cc: Signed-off-by: Bart Van Assche Signed-off-by: Mike Snitzer --- drivers/md/dm-zoned-target.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-zoned-target.c b/drivers/md/dm-zoned-target.c index 3c0e45f4dcf5..a44183ff4be0 100644 --- a/drivers/md/dm-zoned-target.c +++ b/drivers/md/dm-zoned-target.c @@ -787,7 +787,7 @@ static int dmz_ctr(struct dm_target *ti, unsigned int argc, char **argv) /* Chunk BIO work */ mutex_init(&dmz->chunk_lock); - INIT_RADIX_TREE(&dmz->chunk_rxtree, GFP_KERNEL); + INIT_RADIX_TREE(&dmz->chunk_rxtree, GFP_NOIO); dmz->chunk_wq = alloc_workqueue("dmz_cwq_%s", WQ_MEM_RECLAIM | WQ_UNBOUND, 0, dev->name); if (!dmz->chunk_wq) { -- cgit v1.2.3 From f2ccaa5904666f84d4e6958d6db9d1e65ead5085 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 22 Jun 2018 10:01:19 +0200 Subject: dm raid: don't use 'const' in function return A newly introduced function has 'const int' as the return type, but as "make W=1" reports, that has no meaning: drivers/md/dm-raid.c:510:18: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers] This changes the return type to plain 'int'. Signed-off-by: Arnd Bergmann Fixes: 33e53f06850f ("dm raid: introduce extended superblock and new raid types to support takeover/reshaping") Signed-off-by: Mike Snitzer Fixes: 552aa679f2657431 ("dm raid: use rs_is_raid*()") Signed-off-by: Geert Uytterhoeven Signed-off-by: Mike Snitzer --- drivers/md/dm-raid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c index ab13fcec3fca..75df4c9d8b54 100644 --- a/drivers/md/dm-raid.c +++ b/drivers/md/dm-raid.c @@ -588,7 +588,7 @@ static const char *raid10_md_layout_to_format(int layout) } /* Return md raid10 algorithm for @name */ -static const int raid10_name_to_format(const char *name) +static int raid10_name_to_format(const char *name) { if (!strcasecmp(name, "near")) return ALGORITHM_RAID10_NEAR; -- cgit v1.2.3 From fe2a19652918a5247418aed48a247414a5e45fe2 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Thu, 21 Jun 2018 16:48:26 -0400 Subject: drm/amdgpu: Count disabled CRTCs in commit tail earlier MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a regression I accidentally reduced that was picked up by kasan, where we were checking the CRTC atomic states after DRM's helpers had already freed them. Example: ================================================================== BUG: KASAN: use-after-free in amdgpu_dm_atomic_commit_tail.cold.50+0x13d/0x15a [amdgpu] Read of size 1 at addr ffff8803a697b071 by task kworker/u16:0/7 CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G O 4.18.0-rc1Lyude-Upstream+ #1 Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.21 05/02/2018 Workqueue: events_unbound commit_work [drm_kms_helper] Call Trace: dump_stack+0xc1/0x169 ? dump_stack_print_info.cold.1+0x42/0x42 ? kmsg_dump_rewind_nolock+0xd9/0xd9 ? printk+0x9f/0xc5 ? amdgpu_dm_atomic_commit_tail.cold.50+0x13d/0x15a [amdgpu] print_address_description+0x6c/0x23c ? amdgpu_dm_atomic_commit_tail.cold.50+0x13d/0x15a [amdgpu] kasan_report.cold.6+0x241/0x2fd amdgpu_dm_atomic_commit_tail.cold.50+0x13d/0x15a [amdgpu] ? commit_planes_to_stream.constprop.45+0x13b0/0x13b0 [amdgpu] ? cpu_load_update_active+0x290/0x290 ? finish_task_switch+0x2bd/0x840 ? __switch_to_asm+0x34/0x70 ? read_word_at_a_time+0xe/0x20 ? strscpy+0x14b/0x460 ? drm_atomic_helper_wait_for_dependencies+0x47d/0x7e0 [drm_kms_helper] commit_tail+0x96/0xe0 [drm_kms_helper] process_one_work+0x88a/0x1360 ? create_worker+0x540/0x540 ? __sched_text_start+0x8/0x8 ? move_queued_task+0x760/0x760 ? call_rcu_sched+0x20/0x20 ? vsnprintf+0xcda/0x1350 ? wait_woken+0x1c0/0x1c0 ? mutex_unlock+0x1d/0x40 ? init_timer_key+0x190/0x230 ? schedule+0xea/0x390 ? __schedule+0x1ea0/0x1ea0 ? need_to_create_worker+0xe4/0x210 ? init_worker_pool+0x700/0x700 ? try_to_del_timer_sync+0xbf/0x110 ? del_timer+0x120/0x120 ? __mutex_lock_slowpath+0x10/0x10 worker_thread+0x196/0x11f0 ? flush_rcu_work+0x50/0x50 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __schedule+0x7d6/0x1ea0 ? migrate_swap_stop+0x850/0x880 ? __sched_text_start+0x8/0x8 ? save_stack+0x8c/0xb0 ? kasan_kmalloc+0xbf/0xe0 ? kmem_cache_alloc_trace+0xe4/0x190 ? kthread+0x98/0x390 ? ret_from_fork+0x35/0x40 ? ret_from_fork+0x35/0x40 ? deactivate_slab.isra.67+0x3c4/0x5c0 ? kthread+0x98/0x390 ? kthread+0x98/0x390 ? set_track+0x76/0x120 ? schedule+0xea/0x390 ? __schedule+0x1ea0/0x1ea0 ? wait_woken+0x1c0/0x1c0 ? kasan_unpoison_shadow+0x30/0x40 ? parse_args.cold.15+0x17a/0x17a ? flush_rcu_work+0x50/0x50 kthread+0x2d4/0x390 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x35/0x40 Allocated by task 1124: kasan_kmalloc+0xbf/0xe0 kmem_cache_alloc_trace+0xe4/0x190 dm_crtc_duplicate_state+0x78/0x130 [amdgpu] drm_atomic_get_crtc_state+0x147/0x410 [drm] page_flip_common+0x57/0x230 [drm_kms_helper] drm_atomic_helper_page_flip+0xa6/0x110 [drm_kms_helper] drm_mode_page_flip_ioctl+0xc4b/0x10a0 [drm] drm_ioctl_kernel+0x1d4/0x260 [drm] drm_ioctl+0x433/0x920 [drm] amdgpu_drm_ioctl+0x11d/0x290 [amdgpu] do_vfs_ioctl+0x1a1/0x13d0 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x147/0x440 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 1124: __kasan_slab_free+0x12e/0x180 kfree+0x92/0x1a0 drm_atomic_state_default_clear+0x315/0xc40 [drm] __drm_atomic_state_free+0x35/0xd0 [drm] drm_atomic_helper_update_plane+0xac/0x350 [drm_kms_helper] __setplane_internal+0x2d6/0x840 [drm] drm_mode_cursor_universal+0x41e/0xbe0 [drm] drm_mode_cursor_common+0x49f/0x880 [drm] drm_mode_cursor_ioctl+0xd8/0x130 [drm] drm_ioctl_kernel+0x1d4/0x260 [drm] drm_ioctl+0x433/0x920 [drm] amdgpu_drm_ioctl+0x11d/0x290 [amdgpu] do_vfs_ioctl+0x1a1/0x13d0 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x147/0x440 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff8803a697b068 which belongs to the cache kmalloc-1024 of size 1024 The buggy address is located 9 bytes inside of 1024-byte region [ffff8803a697b068, ffff8803a697b468) The buggy address belongs to the page: page:ffffea000e9a5e00 count:1 mapcount:0 mapping:ffff88041e00efc0 index:0x0 compound_mapcount: 0 flags: 0x8000000000008100(slab|head) raw: 8000000000008100 ffffea000ecbc208 ffff88041e000c70 ffff88041e00efc0 raw: 0000000000000000 0000000000170017 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8803a697af00: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8803a697af80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8803a697b000: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb ^ ffff8803a697b080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8803a697b100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== So, we fix this by counting the number of CRTCs this atomic commit disabled early on in the function before their atomic states have been freed, then use that count later to do the appropriate number of RPM puts at the end of the function. Acked-by: Michel Dänzer Reviewed-by: Harry Wentland Cc: stable@vger.kernel.org Fixes: 97028037a38ae ("drm/amdgpu: Grab/put runtime PM references in atomic_commit_tail()") Signed-off-by: Lyude Paul Cc: Michel Dänzer Reported-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index f9add85157e7..689dbdf44bbf 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -4206,6 +4206,7 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) struct drm_connector *connector; struct drm_connector_state *old_con_state, *new_con_state; struct dm_crtc_state *dm_old_crtc_state, *dm_new_crtc_state; + int crtc_disable_count = 0; drm_atomic_helper_update_legacy_modeset_state(dev, state); @@ -4410,6 +4411,9 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc); bool modeset_needed; + if (old_crtc_state->active && !new_crtc_state->active) + crtc_disable_count++; + dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); modeset_needed = modeset_required( @@ -4463,11 +4467,9 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) * so we can put the GPU into runtime suspend if we're not driving any * displays anymore */ + for (i = 0; i < crtc_disable_count; i++) + pm_runtime_put_autosuspend(dev->dev); pm_runtime_mark_last_busy(dev->dev); - for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { - if (old_crtc_state->active && !new_crtc_state->active) - pm_runtime_put_autosuspend(dev->dev); - } } -- cgit v1.2.3 From 38e624a18f9a05b8c894409be6b14709a7206c7c Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Thu, 21 Jun 2018 11:27:46 +0200 Subject: drm/amdgpu: GPU vs CPU page size fixes in amdgpu_vm_bo_split_mapping MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit start / last / max_entries are numbers of GPU pages, pfn / count are numbers of CPU pages. Convert between them accordingly. Fixes badness on systems with > 4K page size. Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/106258 Reported-by: Matt Corallo Tested-by: foxbat@ruin.net Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index b0eb2f537392..edf16b2b957a 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -1463,7 +1463,9 @@ static int amdgpu_vm_bo_split_mapping(struct amdgpu_device *adev, uint64_t count; max_entries = min(max_entries, 16ull * 1024ull); - for (count = 1; count < max_entries; ++count) { + for (count = 1; + count < max_entries / (PAGE_SIZE / AMDGPU_GPU_PAGE_SIZE); + ++count) { uint64_t idx = pfn + count; if (pages_addr[idx] != @@ -1476,7 +1478,7 @@ static int amdgpu_vm_bo_split_mapping(struct amdgpu_device *adev, dma_addr = pages_addr; } else { addr = pages_addr[pfn]; - max_entries = count; + max_entries = count * (PAGE_SIZE / AMDGPU_GPU_PAGE_SIZE); } } else if (flags & AMDGPU_PTE_VALID) { @@ -1491,7 +1493,7 @@ static int amdgpu_vm_bo_split_mapping(struct amdgpu_device *adev, if (r) return r; - pfn += last - start + 1; + pfn += (last - start + 1) / (PAGE_SIZE / AMDGPU_GPU_PAGE_SIZE); if (nodes && nodes->size == pfn) { pfn = 0; ++nodes; -- cgit v1.2.3 From 7b4e88434c4e7982fb053c49657e1c8bbb8692d9 Mon Sep 17 00:00:00 2001 From: Casey Schaufler Date: Fri, 22 Jun 2018 10:54:45 -0700 Subject: Smack: Mark inode instant in smack_task_to_inode Smack: Mark inode instant in smack_task_to_inode /proc clean-up in commit 1bbc55131e59bd099fdc568d3aa0b42634dbd188 resulted in smack_task_to_inode() being called before smack_d_instantiate. This resulted in the smk_inode value being ignored, even while present for files in /proc/self. Marking the inode as instant here fixes that. Signed-off-by: Casey Schaufler Signed-off-by: James Morris --- security/smack/smack_lsm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index 7ad226018f51..19de675d4504 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -2296,6 +2296,7 @@ static void smack_task_to_inode(struct task_struct *p, struct inode *inode) struct smack_known *skp = smk_of_task_struct(p); isp->smk_inode = skp; + isp->smk_flags |= SMK_INODE_INSTANT; } /* -- cgit v1.2.3 From 1ebb2709ba39bf291a30dc1fcf937f46c4675f4d Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 12 Jun 2018 15:48:06 +0100 Subject: arm64: dts: apq8096-db820c: disable uart0 by default Access to UART0 is disabled by bootloaders. By leaving it enabled by default would reboot the board. Disable this for now, this would alteast give a board which boots. Signed-off-by: Srinivas Kandagatla Reviewed-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 0f829db33efe..4d5ef01f43a3 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -75,7 +75,7 @@ serial@75b1000 { label = "LS-UART0"; - status = "okay"; + status = "disabled"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_uart2_4pins_default>; pinctrl-1 = <&blsp2_uart2_4pins_sleep>; -- cgit v1.2.3 From 6b4154a655a258c67bcfabbd4c3a06637e74ebcd Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 8 May 2018 10:09:51 -0500 Subject: arm64: dts: msm8916: fix Coresight ETF graph connections The ETF input should be connected to the funnel output, and the ETF output should be connected to the replicator input. The labels are wrong and these got swapped: Warning (graph_endpoint): /soc/funnel@821000/ports/port@8/endpoint: graph connection to node '/soc/etf@825000/ports/port@1/endpoint' is not bidirectional Warning (graph_endpoint): /soc/replicator@824000/ports/port@2/endpoint: graph connection to node '/soc/etf@825000/ports/port@0/endpoint' is not bidirectional Fixes: 7c10da373698 ("arm64: dts: qcom: Add msm8916 CoreSight components") Cc: Ivan T. Ivanov Cc: Mathieu Poirier Cc: Andy Gross Cc: David Brown Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Rob Herring Reviewed-by: Mathieu Poirier Tested-by: Mathieu Poirier Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 650f356f69ca..c2625d15a8c0 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -1191,14 +1191,14 @@ port@0 { reg = <0>; - etf_out: endpoint { + etf_in: endpoint { slave-mode; remote-endpoint = <&funnel0_out>; }; }; port@1 { reg = <0>; - etf_in: endpoint { + etf_out: endpoint { remote-endpoint = <&replicator_in>; }; }; -- cgit v1.2.3 From b5685d2687d6612adf5eac519eb7008f74dfd1ec Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 2 Jun 2018 17:26:34 +0200 Subject: batman-adv: Fix bat_ogm_iv best gw refcnt after netlink dump A reference for the best gateway is taken when the list of gateways in the mesh is sent via netlink. This is necessary to check whether the currently dumped entry is the currently selected gateway or not. This information is then transferred as flag BATADV_ATTR_FLAG_BEST. After the comparison of the current entry is done, batadv_iv_gw_dump_entry() has to decrease the reference counter again. Otherwise the reference will be held and thus prevents a proper shutdown of the batman-adv interfaces (and some of the interfaces enslaved in it). Fixes: efb766af06e3 ("batman-adv: add B.A.T.M.A.N. IV bat_gw_dump implementations") Reported-by: Andreas Ziegler Tested-by: Andreas Ziegler Signed-off-by: Sven Eckelmann Acked-by: Marek Lindner Signed-off-by: Simon Wunderlich --- net/batman-adv/bat_iv_ogm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index be09a9883825..73bf6a93a3cf 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -2732,7 +2732,7 @@ static int batadv_iv_gw_dump_entry(struct sk_buff *msg, u32 portid, u32 seq, { struct batadv_neigh_ifinfo *router_ifinfo = NULL; struct batadv_neigh_node *router; - struct batadv_gw_node *curr_gw; + struct batadv_gw_node *curr_gw = NULL; int ret = 0; void *hdr; @@ -2780,6 +2780,8 @@ static int batadv_iv_gw_dump_entry(struct sk_buff *msg, u32 portid, u32 seq, ret = 0; out: + if (curr_gw) + batadv_gw_node_put(curr_gw); if (router_ifinfo) batadv_neigh_ifinfo_put(router_ifinfo); if (router) -- cgit v1.2.3 From 9713cb0cf19f1cec6c007e3b37be0697042b6720 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 2 Jun 2018 17:26:35 +0200 Subject: batman-adv: Fix bat_v best gw refcnt after netlink dump A reference for the best gateway is taken when the list of gateways in the mesh is sent via netlink. This is necessary to check whether the currently dumped entry is the currently selected gateway or not. This information is then transferred as flag BATADV_ATTR_FLAG_BEST. After the comparison of the current entry is done, batadv_v_gw_dump_entry() has to decrease the reference counter again. Otherwise the reference will be held and thus prevents a proper shutdown of the batman-adv interfaces (and some of the interfaces enslaved in it). Fixes: b71bb6f924fe ("batman-adv: add B.A.T.M.A.N. V bat_gw_dump implementations") Signed-off-by: Sven Eckelmann Acked-by: Marek Lindner Signed-off-by: Simon Wunderlich --- net/batman-adv/bat_v.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/batman-adv/bat_v.c b/net/batman-adv/bat_v.c index ec93337ee259..6baec4e68898 100644 --- a/net/batman-adv/bat_v.c +++ b/net/batman-adv/bat_v.c @@ -927,7 +927,7 @@ static int batadv_v_gw_dump_entry(struct sk_buff *msg, u32 portid, u32 seq, { struct batadv_neigh_ifinfo *router_ifinfo = NULL; struct batadv_neigh_node *router; - struct batadv_gw_node *curr_gw; + struct batadv_gw_node *curr_gw = NULL; int ret = 0; void *hdr; @@ -995,6 +995,8 @@ static int batadv_v_gw_dump_entry(struct sk_buff *msg, u32 portid, u32 seq, ret = 0; out: + if (curr_gw) + batadv_gw_node_put(curr_gw); if (router_ifinfo) batadv_neigh_ifinfo_put(router_ifinfo); if (router) -- cgit v1.2.3 From 36dc621ceca1be3ec885aeade5fdafbbcc452a6d Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 1 Jun 2018 19:24:23 +0200 Subject: batman-adv: Fix debugfs path for renamed hardif batman-adv is creating special debugfs directories in the init net_namespace for each valid hard-interface (net_device). But it is possible to rename a net_device to a completely different name then the original one. It can therefore happen that a user registers a new net_device which gets the name "wlan0" assigned by default. batman-adv is also adding a new directory under $debugfs/batman-adv/ with the name "wlan0". The user then decides to rename this device to "wl_pri" and registers a different device. The kernel may now decide to use the name "wlan0" again for this new device. batman-adv will detect it as a valid net_device and tries to create a directory with the name "wlan0" under $debugfs/batman-adv/. But there already exists one with this name under this path and thus this fails. batman-adv will detect a problem and rollback the registering of this device. batman-adv must therefore take care of renaming the debugfs directories for hard-interfaces whenever it detects such a net_device rename. Fixes: 5bc7c1eb44f2 ("batman-adv: add debugfs structure for information per interface") Reported-by: John Soros Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/debugfs.c | 20 ++++++++++++++++++++ net/batman-adv/debugfs.h | 6 ++++++ net/batman-adv/hard-interface.c | 3 +++ 3 files changed, 29 insertions(+) diff --git a/net/batman-adv/debugfs.c b/net/batman-adv/debugfs.c index 4229b01ac7b5..7e5de7b9f6d5 100644 --- a/net/batman-adv/debugfs.c +++ b/net/batman-adv/debugfs.c @@ -19,6 +19,7 @@ #include "debugfs.h" #include "main.h" +#include #include #include #include @@ -343,6 +344,25 @@ out: return -ENOMEM; } +/** + * batadv_debugfs_rename_hardif() - Fix debugfs path for renamed hardif + * @hard_iface: hard interface which was renamed + */ +void batadv_debugfs_rename_hardif(struct batadv_hard_iface *hard_iface) +{ + const char *name = hard_iface->net_dev->name; + struct dentry *dir; + struct dentry *d; + + dir = hard_iface->debug_dir; + if (!dir) + return; + + d = debugfs_rename(dir->d_parent, dir, dir->d_parent, name); + if (!d) + pr_err("Can't rename debugfs dir to %s\n", name); +} + /** * batadv_debugfs_del_hardif() - delete the base directory for a hard interface * in debugfs. diff --git a/net/batman-adv/debugfs.h b/net/batman-adv/debugfs.h index 37b069698b04..8538a7a75e93 100644 --- a/net/batman-adv/debugfs.h +++ b/net/batman-adv/debugfs.h @@ -32,6 +32,7 @@ void batadv_debugfs_destroy(void); int batadv_debugfs_add_meshif(struct net_device *dev); void batadv_debugfs_del_meshif(struct net_device *dev); int batadv_debugfs_add_hardif(struct batadv_hard_iface *hard_iface); +void batadv_debugfs_rename_hardif(struct batadv_hard_iface *hard_iface); void batadv_debugfs_del_hardif(struct batadv_hard_iface *hard_iface); #else @@ -59,6 +60,11 @@ int batadv_debugfs_add_hardif(struct batadv_hard_iface *hard_iface) return 0; } +static inline +void batadv_debugfs_rename_hardif(struct batadv_hard_iface *hard_iface) +{ +} + static inline void batadv_debugfs_del_hardif(struct batadv_hard_iface *hard_iface) { diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c index c405d15befd6..dc2763b11107 100644 --- a/net/batman-adv/hard-interface.c +++ b/net/batman-adv/hard-interface.c @@ -1051,6 +1051,9 @@ static int batadv_hard_if_event(struct notifier_block *this, if (batadv_is_wifi_hardif(hard_iface)) hard_iface->num_bcasts = BATADV_NUM_BCASTS_WIRELESS; break; + case NETDEV_CHANGENAME: + batadv_debugfs_rename_hardif(hard_iface); + break; default: break; } -- cgit v1.2.3 From 6da7be7d24b2921f8215473ba7552796dff05fe1 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 1 Jun 2018 19:24:24 +0200 Subject: batman-adv: Fix debugfs path for renamed softif batman-adv is creating special debugfs directories in the init net_namespace for each created soft-interface (batadv net_device). But it is possible to rename a net_device to a completely different name then the original one. It can therefore happen that a user registers a new batadv net_device with the name "bat0". batman-adv is then also adding a new directory under $debugfs/batman-adv/ with the name "wlan0". The user then decides to rename this device to "bat1" and registers a different batadv device with the name "bat0". batman-adv will then try to create a directory with the name "bat0" under $debugfs/batman-adv/ again. But there already exists one with this name under this path and thus this fails. batman-adv will detect a problem and rollback the registering of this device. batman-adv must therefore take care of renaming the debugfs directories for soft-interfaces whenever it detects such a net_device rename. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/debugfs.c | 20 ++++++++++++++++++++ net/batman-adv/debugfs.h | 5 +++++ net/batman-adv/hard-interface.c | 34 ++++++++++++++++++++++++++++------ 3 files changed, 53 insertions(+), 6 deletions(-) diff --git a/net/batman-adv/debugfs.c b/net/batman-adv/debugfs.c index 7e5de7b9f6d5..87479c60670e 100644 --- a/net/batman-adv/debugfs.c +++ b/net/batman-adv/debugfs.c @@ -433,6 +433,26 @@ out: return -ENOMEM; } +/** + * batadv_debugfs_rename_meshif() - Fix debugfs path for renamed softif + * @dev: net_device which was renamed + */ +void batadv_debugfs_rename_meshif(struct net_device *dev) +{ + struct batadv_priv *bat_priv = netdev_priv(dev); + const char *name = dev->name; + struct dentry *dir; + struct dentry *d; + + dir = bat_priv->debug_dir; + if (!dir) + return; + + d = debugfs_rename(dir->d_parent, dir, dir->d_parent, name); + if (!d) + pr_err("Can't rename debugfs dir to %s\n", name); +} + /** * batadv_debugfs_del_meshif() - Remove interface dependent debugfs entries * @dev: netdev struct of the soft interface diff --git a/net/batman-adv/debugfs.h b/net/batman-adv/debugfs.h index 8538a7a75e93..08a592ffbee5 100644 --- a/net/batman-adv/debugfs.h +++ b/net/batman-adv/debugfs.h @@ -30,6 +30,7 @@ struct net_device; void batadv_debugfs_init(void); void batadv_debugfs_destroy(void); int batadv_debugfs_add_meshif(struct net_device *dev); +void batadv_debugfs_rename_meshif(struct net_device *dev); void batadv_debugfs_del_meshif(struct net_device *dev); int batadv_debugfs_add_hardif(struct batadv_hard_iface *hard_iface); void batadv_debugfs_rename_hardif(struct batadv_hard_iface *hard_iface); @@ -50,6 +51,10 @@ static inline int batadv_debugfs_add_meshif(struct net_device *dev) return 0; } +static inline void batadv_debugfs_rename_meshif(struct net_device *dev) +{ +} + static inline void batadv_debugfs_del_meshif(struct net_device *dev) { } diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c index dc2763b11107..2f0d42f2f913 100644 --- a/net/batman-adv/hard-interface.c +++ b/net/batman-adv/hard-interface.c @@ -989,6 +989,32 @@ void batadv_hardif_remove_interfaces(void) rtnl_unlock(); } +/** + * batadv_hard_if_event_softif() - Handle events for soft interfaces + * @event: NETDEV_* event to handle + * @net_dev: net_device which generated an event + * + * Return: NOTIFY_* result + */ +static int batadv_hard_if_event_softif(unsigned long event, + struct net_device *net_dev) +{ + struct batadv_priv *bat_priv; + + switch (event) { + case NETDEV_REGISTER: + batadv_sysfs_add_meshif(net_dev); + bat_priv = netdev_priv(net_dev); + batadv_softif_create_vlan(bat_priv, BATADV_NO_FLAGS); + break; + case NETDEV_CHANGENAME: + batadv_debugfs_rename_meshif(net_dev); + break; + } + + return NOTIFY_DONE; +} + static int batadv_hard_if_event(struct notifier_block *this, unsigned long event, void *ptr) { @@ -997,12 +1023,8 @@ static int batadv_hard_if_event(struct notifier_block *this, struct batadv_hard_iface *primary_if = NULL; struct batadv_priv *bat_priv; - if (batadv_softif_is_valid(net_dev) && event == NETDEV_REGISTER) { - batadv_sysfs_add_meshif(net_dev); - bat_priv = netdev_priv(net_dev); - batadv_softif_create_vlan(bat_priv, BATADV_NO_FLAGS); - return NOTIFY_DONE; - } + if (batadv_softif_is_valid(net_dev)) + return batadv_hard_if_event_softif(event, net_dev); hard_iface = batadv_hardif_get_by_netdev(net_dev); if (!hard_iface && (event == NETDEV_REGISTER || -- cgit v1.2.3 From 4a519b83da16927fb98fd32b0f598e639d1f1859 Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Thu, 7 Jun 2018 00:46:23 +0200 Subject: batman-adv: Avoid storing non-TT-sync flags on singular entries too MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit 54e22f265e87 ("batman-adv: fix TT sync flag inconsistencies") TT sync flags and TT non-sync'd flags are supposed to be stored separately. The previous patch missed to apply this separation on a TT entry with only a single TT orig entry. This is a minor fix because with only a single TT orig entry the DDoS issue the former patch solves does not apply. Fixes: 54e22f265e87 ("batman-adv: fix TT sync flag inconsistencies") Signed-off-by: Linus Lüssing Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/translation-table.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 3986551397ca..61ce300091f3 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -1705,7 +1705,8 @@ static bool batadv_tt_global_add(struct batadv_priv *bat_priv, ether_addr_copy(common->addr, tt_addr); common->vid = vid; - common->flags = flags; + common->flags = flags & (~BATADV_TT_SYNC_MASK); + tt_global_entry->roam_at = 0; /* node must store current time in case of roaming. This is * needed to purge this entry out on timeout (if nobody claims -- cgit v1.2.3 From a44ebeff6bbd6ef50db41b4195fca87b21aefd20 Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Thu, 7 Jun 2018 00:46:24 +0200 Subject: batman-adv: Fix multicast TT issues with bogus ROAM flags MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When a (broken) node wrongly sends multicast TT entries with a ROAM flag then this causes any receiving node to drop all entries for the same multicast MAC address announced by other nodes, leading to packet loss. Fix this DoS vector by only storing TT sync flags. For multicast TT non-sync'ing flag bits like ROAM are unused so far anyway. Fixes: 1d8ab8d3c176 ("batman-adv: Modified forwarding behaviour for multicast packets") Reported-by: Leonardo Mörlein Signed-off-by: Linus Lüssing Signed-off-by: Simon Wunderlich --- net/batman-adv/translation-table.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 61ce300091f3..12a2b7d21376 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -1705,7 +1705,8 @@ static bool batadv_tt_global_add(struct batadv_priv *bat_priv, ether_addr_copy(common->addr, tt_addr); common->vid = vid; - common->flags = flags & (~BATADV_TT_SYNC_MASK); + if (!is_multicast_ether_addr(common->addr)) + common->flags = flags & (~BATADV_TT_SYNC_MASK); tt_global_entry->roam_at = 0; /* node must store current time in case of roaming. This is @@ -1769,7 +1770,8 @@ static bool batadv_tt_global_add(struct batadv_priv *bat_priv, * TT_CLIENT_TEMP, therefore they have to be copied in the * client entry */ - common->flags |= flags & (~BATADV_TT_SYNC_MASK); + if (!is_multicast_ether_addr(common->addr)) + common->flags |= flags & (~BATADV_TT_SYNC_MASK); /* If there is the BATADV_TT_CLIENT_ROAM flag set, there is only * one originator left in the list and we previously received a -- cgit v1.2.3 From b2f82565f2caa1a5c1a26e68593eaef355fae3f4 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Wed, 20 Jun 2018 16:35:16 -0300 Subject: powerpc: Wire up io_pgetevents Wire up io_pgetevents system call on powerpc. io_pgetevents is a new syscall to read asynchronous I/O events from the completion queue. Tested with libaio branch aio-poll[1] and the io_pgetevents test (#22) passed on both ppc64 LE and BE modes. [1] https://pagure.io/libaio/branch/aio-poll CC: Christoph Hellwig Signed-off-by: Breno Leitao Acked-by: Christoph Hellwig Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/systbl.h | 1 + arch/powerpc/include/asm/unistd.h | 2 +- arch/powerpc/include/uapi/asm/unistd.h | 1 + 3 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index cfcf6a874cfa..01b5171ea189 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -393,3 +393,4 @@ SYSCALL(pkey_alloc) SYSCALL(pkey_free) SYSCALL(pkey_mprotect) SYSCALL(rseq) +COMPAT_SYS(io_pgetevents) diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index 1e9708632dce..c19379f0a32e 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -12,7 +12,7 @@ #include -#define NR_syscalls 388 +#define NR_syscalls 389 #define __NR__exit __NR_exit diff --git a/arch/powerpc/include/uapi/asm/unistd.h b/arch/powerpc/include/uapi/asm/unistd.h index ac5ba55066dd..985534d0b448 100644 --- a/arch/powerpc/include/uapi/asm/unistd.h +++ b/arch/powerpc/include/uapi/asm/unistd.h @@ -399,5 +399,6 @@ #define __NR_pkey_free 385 #define __NR_pkey_mprotect 386 #define __NR_rseq 387 +#define __NR_io_pgetevents 388 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */ -- cgit v1.2.3 From c432c08805963f9b145b86b5f4ac945881e1b9df Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sat, 23 Jun 2018 10:24:23 -0700 Subject: arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson --- arch/arm64/configs/defconfig | 102 +++++++++++++++++-------------------------- 1 file changed, 39 insertions(+), 63 deletions(-) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 3cfa8ca26738..f9a186f6af8a 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -47,6 +47,7 @@ CONFIG_ARCH_MVEBU=y CONFIG_ARCH_QCOM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_ARCH_SEATTLE=y +CONFIG_ARCH_SYNQUACER=y CONFIG_ARCH_RENESAS=y CONFIG_ARCH_R8A7795=y CONFIG_ARCH_R8A7796=y @@ -58,7 +59,6 @@ CONFIG_ARCH_R8A77995=y CONFIG_ARCH_STRATIX10=y CONFIG_ARCH_TEGRA=y CONFIG_ARCH_SPRD=y -CONFIG_ARCH_SYNQUACER=y CONFIG_ARCH_THUNDER=y CONFIG_ARCH_THUNDER2=y CONFIG_ARCH_UNIPHIER=y @@ -67,25 +67,23 @@ CONFIG_ARCH_XGENE=y CONFIG_ARCH_ZX=y CONFIG_ARCH_ZYNQMP=y CONFIG_PCI=y -CONFIG_HOTPLUG_PCI_PCIE=y CONFIG_PCI_IOV=y CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_ACPI=y -CONFIG_PCI_LAYERSCAPE=y -CONFIG_PCI_HISI=y -CONFIG_PCIE_QCOM=y -CONFIG_PCIE_KIRIN=y -CONFIG_PCIE_ARMADA_8K=y -CONFIG_PCIE_HISI_STB=y CONFIG_PCI_AARDVARK=y CONFIG_PCI_TEGRA=y CONFIG_PCIE_RCAR=y -CONFIG_PCIE_ROCKCHIP=y -CONFIG_PCIE_ROCKCHIP_HOST=m CONFIG_PCI_HOST_GENERIC=y CONFIG_PCI_XGENE=y CONFIG_PCI_HOST_THUNDER_PEM=y CONFIG_PCI_HOST_THUNDER_ECAM=y +CONFIG_PCIE_ROCKCHIP_HOST=m +CONFIG_PCI_LAYERSCAPE=y +CONFIG_PCI_HISI=y +CONFIG_PCIE_QCOM=y +CONFIG_PCIE_ARMADA_8K=y +CONFIG_PCIE_KIRIN=y +CONFIG_PCIE_HISI_STB=y CONFIG_ARM64_VA_BITS_48=y CONFIG_SCHED_MC=y CONFIG_NUMA=y @@ -104,8 +102,6 @@ CONFIG_HIBERNATION=y CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y CONFIG_ARM_CPUIDLE=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=y @@ -113,11 +109,11 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y CONFIG_CPUFREQ_DT=y +CONFIG_ACPI_CPPC_CPUFREQ=m CONFIG_ARM_ARMADA_37XX_CPUFREQ=y CONFIG_ARM_BIG_LITTLE_CPUFREQ=y CONFIG_ARM_SCPI_CPUFREQ=y CONFIG_ARM_TEGRA186_CPUFREQ=y -CONFIG_ACPI_CPPC_CPUFREQ=m CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -236,11 +232,6 @@ CONFIG_SMSC911X=y CONFIG_SNI_AVE=y CONFIG_SNI_NETSEC=y CONFIG_STMMAC_ETH=m -CONFIG_DWMAC_IPQ806X=m -CONFIG_DWMAC_MESON=m -CONFIG_DWMAC_ROCKCHIP=m -CONFIG_DWMAC_SUNXI=m -CONFIG_DWMAC_SUN8I=m CONFIG_MDIO_BUS_MUX_MMIOREG=y CONFIG_AT803X_PHY=m CONFIG_MARVELL_PHY=m @@ -269,8 +260,8 @@ CONFIG_WL18XX=m CONFIG_WLCORE_SDIO=m CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_ADC=m -CONFIG_KEYBOARD_CROS_EC=y CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_CROS_EC=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m CONFIG_INPUT_MISC=y @@ -296,17 +287,13 @@ CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=11 -CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_SERIAL_MVEBU_UART=y CONFIG_SERIAL_DEV_BUS=y -CONFIG_SERIAL_DEV_CTRL_TTYPORT=y CONFIG_VIRTIO_CONSOLE=y -CONFIG_I2C_HID=m CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA954x=y @@ -325,26 +312,26 @@ CONFIG_I2C_RCAR=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_SPI=y CONFIG_SPI_ARMADA_3700=y -CONFIG_SPI_MESON_SPICC=m -CONFIG_SPI_MESON_SPIFC=m CONFIG_SPI_BCM2835=m CONFIG_SPI_BCM2835AUX=m +CONFIG_SPI_MESON_SPICC=m +CONFIG_SPI_MESON_SPIFC=m CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y -CONFIG_SPI_QUP=y CONFIG_SPI_ROCKCHIP=y +CONFIG_SPI_QUP=y CONFIG_SPI_S3C64XX=y CONFIG_SPI_SPIDEV=m CONFIG_SPMI=y -CONFIG_PINCTRL_IPQ8074=y CONFIG_PINCTRL_SINGLE=y CONFIG_PINCTRL_MAX77620=y +CONFIG_PINCTRL_IPQ8074=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_MSM8994=y CONFIG_PINCTRL_MSM8996=y -CONFIG_PINCTRL_MT7622=y CONFIG_PINCTRL_QDF2XXX=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +CONFIG_PINCTRL_MT7622=y CONFIG_GPIO_DWAPB=y CONFIG_GPIO_MB86S7X=y CONFIG_GPIO_PL061=y @@ -368,13 +355,13 @@ CONFIG_SENSORS_INA2XX=m CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_CPU_THERMAL=y CONFIG_THERMAL_EMULATION=y +CONFIG_ROCKCHIP_THERMAL=m +CONFIG_RCAR_GEN3_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_BRCMSTB_THERMAL=m CONFIG_EXYNOS_THERMAL=y -CONFIG_RCAR_GEN3_THERMAL=y -CONFIG_QCOM_TSENS=y -CONFIG_ROCKCHIP_THERMAL=m CONFIG_TEGRA_BPMP_THERMAL=m +CONFIG_QCOM_TSENS=y CONFIG_UNIPHIER_THERMAL=y CONFIG_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y @@ -395,9 +382,9 @@ CONFIG_MFD_MAX77620=y CONFIG_MFD_SPMI_PMIC=y CONFIG_MFD_RK808=y CONFIG_MFD_SEC_CORE=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_FAN53555=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_HI6421V530=y CONFIG_REGULATOR_HI655X=y @@ -407,16 +394,15 @@ CONFIG_REGULATOR_QCOM_SMD_RPM=y CONFIG_REGULATOR_QCOM_SPMI=y CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_S2MPS11=y +CONFIG_RC_CORE=m +CONFIG_RC_DECODERS=y +CONFIG_RC_DEVICES=y +CONFIG_IR_MESON=m CONFIG_MEDIA_SUPPORT=m CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_ANALOG_TV_SUPPORT=y CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y CONFIG_MEDIA_CONTROLLER=y -CONFIG_MEDIA_RC_SUPPORT=y -CONFIG_RC_CORE=m -CONFIG_RC_DEVICES=y -CONFIG_RC_DECODERS=y -CONFIG_IR_MESON=m CONFIG_VIDEO_V4L2_SUBDEV_API=y # CONFIG_DVB_NET is not set CONFIG_V4L_MEM2MEM_DRIVERS=y @@ -441,8 +427,7 @@ CONFIG_ROCKCHIP_DW_HDMI=y CONFIG_ROCKCHIP_DW_MIPI_DSI=y CONFIG_ROCKCHIP_INNO_HDMI=y CONFIG_DRM_RCAR_DU=m -CONFIG_DRM_RCAR_LVDS=y -CONFIG_DRM_RCAR_VSP=y +CONFIG_DRM_RCAR_LVDS=m CONFIG_DRM_TEGRA=m CONFIG_DRM_PANEL_SIMPLE=m CONFIG_DRM_I2C_ADV7511=m @@ -455,7 +440,6 @@ CONFIG_FB_ARMCLCD=y CONFIG_BACKLIGHT_GENERIC=m CONFIG_BACKLIGHT_PWM=m CONFIG_BACKLIGHT_LP855X=m -CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set @@ -468,6 +452,7 @@ CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_AK4613=m CONFIG_SND_SIMPLE_CARD=m CONFIG_SND_AUDIO_GRAPH_CARD=m +CONFIG_I2C_HID=m CONFIG_USB=y CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y @@ -501,12 +486,12 @@ CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ACPI=y -CONFIG_MMC_SDHCI_F_SDH30=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_OF_ARASAN=y CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_MMC_SDHCI_CADENCE=y CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_MMC_SDHCI_F_SDH30=y CONFIG_MMC_MESON_GX=y CONFIG_MMC_SDHCI_MSM=y CONFIG_MMC_SPI=y @@ -524,11 +509,11 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_PWM=y CONFIG_LEDS_SYSCON=y +CONFIG_LEDS_TRIGGER_DISK=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_CPU=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_LEDS_TRIGGER_PANIC=y -CONFIG_LEDS_TRIGGER_DISK=y CONFIG_EDAC=y CONFIG_EDAC_GHES=y CONFIG_RTC_CLASS=y @@ -537,13 +522,13 @@ CONFIG_RTC_DRV_RK808=m CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_DS3232=y CONFIG_RTC_DRV_EFI=y +CONFIG_RTC_DRV_CROS_EC=y CONFIG_RTC_DRV_S3C=y CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_SUN6I=y CONFIG_RTC_DRV_ARMADA38X=y CONFIG_RTC_DRV_TEGRA=y CONFIG_RTC_DRV_XGENE=y -CONFIG_RTC_DRV_CROS_EC=y CONFIG_DMADEVICES=y CONFIG_DMA_BCM2835=m CONFIG_K3_DMA=y @@ -579,7 +564,6 @@ CONFIG_HWSPINLOCK_QCOM=y CONFIG_ARM_MHU=y CONFIG_PLATFORM_MHU=y CONFIG_BCM2835_MBOX=y -CONFIG_HI6220_MBOX=y CONFIG_QCOM_APCS_IPC=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_SMMU=y @@ -602,7 +586,6 @@ CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y CONFIG_EXTCON_USB_GPIO=y CONFIG_EXTCON_USBC_CROS_EC=y CONFIG_MEMORY=y -CONFIG_TEGRA_MC=y CONFIG_IIO=y CONFIG_EXYNOS_ADC=y CONFIG_ROCKCHIP_SARADC=m @@ -618,27 +601,27 @@ CONFIG_PWM_RCAR=m CONFIG_PWM_ROCKCHIP=y CONFIG_PWM_SAMSUNG=y CONFIG_PWM_TEGRA=m +CONFIG_PHY_XGENE=y +CONFIG_PHY_SUN4I_USB=y +CONFIG_PHY_HI6220_USB=y CONFIG_PHY_HISTB_COMBPHY=y CONFIG_PHY_HISI_INNO_USB2=y -CONFIG_PHY_RCAR_GEN3_USB2=y -CONFIG_PHY_RCAR_GEN3_USB3=m -CONFIG_PHY_HI6220_USB=y -CONFIG_PHY_QCOM_USB_HS=y -CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_MVEBU_CP110_COMPHY=y CONFIG_PHY_QCOM_QMP=m -CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_QCOM_USB_HS=y +CONFIG_PHY_RCAR_GEN3_USB2=y +CONFIG_PHY_RCAR_GEN3_USB3=m CONFIG_PHY_ROCKCHIP_EMMC=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PHY_ROCKCHIP_PCIE=m CONFIG_PHY_ROCKCHIP_TYPEC=y -CONFIG_PHY_XGENE=y CONFIG_PHY_TEGRA_XUSB=y CONFIG_QCOM_L2_PMU=y CONFIG_QCOM_L3_PMU=y -CONFIG_MESON_EFUSE=m CONFIG_QCOM_QFPROM=y CONFIG_ROCKCHIP_EFUSE=y CONFIG_UNIPHIER_EFUSE=y +CONFIG_MESON_EFUSE=m CONFIG_TEE=y CONFIG_OPTEE=y CONFIG_ARM_SCPI_PROTOCOL=y @@ -647,7 +630,6 @@ CONFIG_EFI_CAPSULE_LOADER=y CONFIG_ACPI=y CONFIG_ACPI_APEI=y CONFIG_ACPI_APEI_GHES=y -CONFIG_ACPI_APEI_PCIEAER=y CONFIG_ACPI_APEI_MEMORY_FAILURE=y CONFIG_ACPI_APEI_EINJ=y CONFIG_EXT2_FS=y @@ -682,7 +664,6 @@ CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -CONFIG_LOCKUP_DETECTOR=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_FTRACE is not set @@ -691,20 +672,15 @@ CONFIG_SECURITY=y CONFIG_CRYPTO_ECHAINIV=y CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_ARM64_CRYPTO=y -CONFIG_CRYPTO_SHA256_ARM64=m -CONFIG_CRYPTO_SHA512_ARM64=m CONFIG_CRYPTO_SHA1_ARM64_CE=y CONFIG_CRYPTO_SHA2_ARM64_CE=y +CONFIG_CRYPTO_SHA512_ARM64_CE=m +CONFIG_CRYPTO_SHA3_ARM64=m +CONFIG_CRYPTO_SM3_ARM64_CE=m CONFIG_CRYPTO_GHASH_ARM64_CE=y CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m CONFIG_CRYPTO_CRC32_ARM64_CE=m -CONFIG_CRYPTO_AES_ARM64=m -CONFIG_CRYPTO_AES_ARM64_CE=m CONFIG_CRYPTO_AES_ARM64_CE_CCM=y CONFIG_CRYPTO_AES_ARM64_CE_BLK=y -CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m CONFIG_CRYPTO_CHACHA20_NEON=m CONFIG_CRYPTO_AES_ARM64_BS=m -CONFIG_CRYPTO_SHA512_ARM64_CE=m -CONFIG_CRYPTO_SHA3_ARM64=m -CONFIG_CRYPTO_SM3_ARM64_CE=m -- cgit v1.2.3 From fd7d58f0dbc3e3c6d68d4a3dccabfe1e52a23345 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sat, 23 Jun 2018 10:24:23 -0700 Subject: ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson --- arch/arm/configs/multi_v7_defconfig | 378 +++++++++++++++--------------------- 1 file changed, 155 insertions(+), 223 deletions(-) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 7e1c543162c3..8f6be1982545 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -1,5 +1,4 @@ CONFIG_SYSVIPC=y -CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_CGROUPS=y @@ -10,20 +9,10 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y CONFIG_CMDLINE_PARTITION=y -CONFIG_ARCH_MULTI_V7=y -# CONFIG_ARCH_MULTI_V5 is not set -# CONFIG_ARCH_MULTI_V4 is not set CONFIG_ARCH_VIRT=y CONFIG_ARCH_ALPINE=y CONFIG_ARCH_ARTPEC=y CONFIG_MACH_ARTPEC6=y -CONFIG_ARCH_MVEBU=y -CONFIG_MACH_ARMADA_370=y -CONFIG_MACH_ARMADA_375=y -CONFIG_MACH_ARMADA_38X=y -CONFIG_MACH_ARMADA_39X=y -CONFIG_MACH_ARMADA_XP=y -CONFIG_MACH_DOVE=y CONFIG_ARCH_AT91=y CONFIG_SOC_SAMA5D2=y CONFIG_SOC_SAMA5D3=y @@ -32,9 +21,9 @@ CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM_CYGNUS=y CONFIG_ARCH_BCM_HR2=y CONFIG_ARCH_BCM_NSP=y -CONFIG_ARCH_BCM_21664=y -CONFIG_ARCH_BCM_281XX=y CONFIG_ARCH_BCM_5301X=y +CONFIG_ARCH_BCM_281XX=y +CONFIG_ARCH_BCM_21664=y CONFIG_ARCH_BCM2835=y CONFIG_ARCH_BCM_63XX=y CONFIG_ARCH_BRCMSTB=y @@ -43,14 +32,14 @@ CONFIG_MACH_BERLIN_BG2=y CONFIG_MACH_BERLIN_BG2CD=y CONFIG_MACH_BERLIN_BG2Q=y CONFIG_ARCH_DIGICOLOR=y +CONFIG_ARCH_EXYNOS=y +CONFIG_EXYNOS5420_MCPM=y CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_HISI=y CONFIG_ARCH_HI3xxx=y -CONFIG_ARCH_HIX5HD2=y CONFIG_ARCH_HIP01=y CONFIG_ARCH_HIP04=y -CONFIG_ARCH_KEYSTONE=y -CONFIG_ARCH_MESON=y +CONFIG_ARCH_HIX5HD2=y CONFIG_ARCH_MXC=y CONFIG_SOC_IMX50=y CONFIG_SOC_IMX51=y @@ -60,29 +49,30 @@ CONFIG_SOC_IMX6SL=y CONFIG_SOC_IMX6SX=y CONFIG_SOC_IMX6UL=y CONFIG_SOC_IMX7D=y -CONFIG_SOC_VF610=y CONFIG_SOC_LS1021A=y +CONFIG_SOC_VF610=y +CONFIG_ARCH_KEYSTONE=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_ARCH_MESON=y +CONFIG_ARCH_MVEBU=y +CONFIG_MACH_ARMADA_370=y +CONFIG_MACH_ARMADA_375=y +CONFIG_MACH_ARMADA_38X=y +CONFIG_MACH_ARMADA_39X=y +CONFIG_MACH_ARMADA_XP=y +CONFIG_MACH_DOVE=y CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y CONFIG_SOC_OMAP5=y CONFIG_SOC_AM33XX=y CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y +CONFIG_ARCH_SIRF=y CONFIG_ARCH_QCOM=y -CONFIG_ARCH_MEDIATEK=y CONFIG_ARCH_MSM8X60=y CONFIG_ARCH_MSM8960=y CONFIG_ARCH_MSM8974=y CONFIG_ARCH_ROCKCHIP=y -CONFIG_ARCH_SOCFPGA=y -CONFIG_PLAT_SPEAR=y -CONFIG_ARCH_SPEAR13XX=y -CONFIG_MACH_SPEAR1310=y -CONFIG_MACH_SPEAR1340=y -CONFIG_ARCH_STI=y -CONFIG_ARCH_STM32=y -CONFIG_ARCH_EXYNOS=y -CONFIG_EXYNOS5420_MCPM=y CONFIG_ARCH_RENESAS=y CONFIG_ARCH_EMEV2=y CONFIG_ARCH_R7S72100=y @@ -99,40 +89,33 @@ CONFIG_ARCH_R8A7792=y CONFIG_ARCH_R8A7793=y CONFIG_ARCH_R8A7794=y CONFIG_ARCH_SH73A0=y +CONFIG_ARCH_SOCFPGA=y +CONFIG_PLAT_SPEAR=y +CONFIG_ARCH_SPEAR13XX=y +CONFIG_MACH_SPEAR1310=y +CONFIG_MACH_SPEAR1340=y +CONFIG_ARCH_STI=y +CONFIG_ARCH_STM32=y CONFIG_ARCH_SUNXI=y -CONFIG_ARCH_SIRF=y CONFIG_ARCH_TEGRA=y -CONFIG_ARCH_TEGRA_2x_SOC=y -CONFIG_ARCH_TEGRA_3x_SOC=y -CONFIG_ARCH_TEGRA_114_SOC=y -CONFIG_ARCH_TEGRA_124_SOC=y CONFIG_ARCH_UNIPHIER=y CONFIG_ARCH_U8500=y -CONFIG_MACH_HREFV60=y -CONFIG_MACH_SNOWBALL=y CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_VEXPRESS_TC2_PM=y CONFIG_ARCH_WM8850=y CONFIG_ARCH_ZYNQ=y -CONFIG_TRUSTED_FOUNDATIONS=y -CONFIG_PCI=y -CONFIG_PCI_HOST_GENERIC=y -CONFIG_PCI_DRA7XX=y -CONFIG_PCI_DRA7XX_EP=y -CONFIG_PCI_KEYSTONE=y -CONFIG_PCI_MSI=y +CONFIG_PCIEPORTBUS=y CONFIG_PCI_MVEBU=y CONFIG_PCI_TEGRA=y CONFIG_PCI_RCAR_GEN2=y CONFIG_PCIE_RCAR=y -CONFIG_PCIEPORTBUS=y +CONFIG_PCI_DRA7XX_EP=y +CONFIG_PCI_KEYSTONE=y CONFIG_PCI_ENDPOINT=y CONFIG_PCI_ENDPOINT_CONFIGFS=y CONFIG_PCI_EPF_TEST=m CONFIG_SMP=y CONFIG_NR_CPUS=16 -CONFIG_HIGHPTE=y -CONFIG_CMA=y CONFIG_SECCOMP=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y @@ -145,14 +128,14 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y +CONFIG_CPUFREQ_DT=y CONFIG_ARM_IMX6Q_CPUFREQ=y CONFIG_QORIQ_CPUFREQ=y CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y -CONFIG_NEON=y -CONFIG_KERNEL_MODE_NEON=y CONFIG_ARM_ZYNQ_CPUIDLE=y CONFIG_ARM_EXYNOS_CPUIDLE=y +CONFIG_KERNEL_MODE_NEON=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -170,23 +153,13 @@ CONFIG_IPV6_MIP6=m CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_NET_DSA=m -CONFIG_NET_SWITCHDEV=y CONFIG_CAN=y -CONFIG_CAN_RAW=y -CONFIG_CAN_BCM=y -CONFIG_CAN_DEV=y CONFIG_CAN_AT91=m CONFIG_CAN_FLEXCAN=m -CONFIG_CAN_RCAR=m +CONFIG_CAN_SUN4I=y CONFIG_CAN_XILINXCAN=y +CONFIG_CAN_RCAR=m CONFIG_CAN_MCP251X=y -CONFIG_NET_DSA_BCM_SF2=m -CONFIG_B53=m -CONFIG_B53_SPI_DRIVER=m -CONFIG_B53_MDIO_DRIVER=m -CONFIG_B53_MMAP_DRIVER=m -CONFIG_B53_SRAB_DRIVER=m -CONFIG_CAN_SUN4I=y CONFIG_BT=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_BCM=y @@ -199,11 +172,9 @@ CONFIG_RFKILL_INPUT=y CONFIG_RFKILL_GPIO=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_OMAP_OCP2SCP=y CONFIG_SIMPLE_PM_BUS=y -CONFIG_SUNXI_RSB=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -236,7 +207,6 @@ CONFIG_PCI_ENDPOINT_TEST=m CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y -CONFIG_SCSI_MULTI_LUN=y CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=y @@ -251,14 +221,20 @@ CONFIG_SATA_MV=y CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y CONFIG_VIRTIO_NET=y -CONFIG_HIX5HD2_GMAC=y +CONFIG_B53_SPI_DRIVER=m +CONFIG_B53_MDIO_DRIVER=m +CONFIG_B53_MMAP_DRIVER=m +CONFIG_B53_SRAB_DRIVER=m +CONFIG_NET_DSA_BCM_SF2=m CONFIG_SUN4I_EMAC=y -CONFIG_MACB=y CONFIG_BCMGENET=m CONFIG_BGMAC_BCMA=y CONFIG_SYSTEMPORT=m +CONFIG_MACB=y CONFIG_NET_CALXEDA_XGMAC=y CONFIG_GIANFAR=y +CONFIG_HIX5HD2_GMAC=y +CONFIG_E1000E=y CONFIG_IGB=y CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y @@ -268,19 +244,17 @@ CONFIG_R8169=y CONFIG_SH_ETH=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y -CONFIG_STMMAC_PLATFORM=y CONFIG_DWMAC_DWC_QOS_ETH=y CONFIG_TI_CPSW=y CONFIG_XILINX_EMACLITE=y CONFIG_AT803X_PHY=y -CONFIG_MARVELL_PHY=y -CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y +CONFIG_MARVELL_PHY=y CONFIG_MICREL_PHY=y -CONFIG_FIXED_PHY=y +CONFIG_REALTEK_PHY=y CONFIG_ROCKCHIP_PHY=y +CONFIG_SMSC_PHY=y CONFIG_USB_PEGASUS=y CONFIG_USB_RTL8152=m CONFIG_USB_LAN78XX=m @@ -288,29 +262,29 @@ CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y CONFIG_BRCMFMAC=m -CONFIG_RT2X00=m -CONFIG_RT2800USB=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_SDIO=m +CONFIG_RT2X00=m +CONFIG_RT2800USB=m CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_QT1070=m CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_TEGRA=y -CONFIG_KEYBOARD_SPEAR=y +CONFIG_KEYBOARD_SAMSUNG=m CONFIG_KEYBOARD_ST_KEYSCAN=y +CONFIG_KEYBOARD_SPEAR=y CONFIG_KEYBOARD_CROS_EC=m -CONFIG_KEYBOARD_SAMSUNG=m CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_CYAPA=m CONFIG_MOUSE_ELAN_I2C=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m CONFIG_TOUCHSCREEN_MMS114=m +CONFIG_TOUCHSCREEN_WM97XX=m CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_STMPE=y CONFIG_TOUCHSCREEN_SUN4I=y -CONFIG_TOUCHSCREEN_WM97XX=m CONFIG_INPUT_MISC=y CONFIG_INPUT_MAX77693_HAPTIC=m CONFIG_INPUT_MAX8997_HAPTIC=m @@ -327,13 +301,12 @@ CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_8250_EM=y CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_8250_UNIPHIER=y +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_SERIAL_ATMEL_TTYAT=y -CONFIG_SERIAL_BCM63XX=y -CONFIG_SERIAL_BCM63XX_CONSOLE=y CONFIG_SERIAL_MESON=y CONFIG_SERIAL_MESON_CONSOLE=y CONFIG_SERIAL_SAMSUNG=y @@ -345,15 +318,14 @@ CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=20 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SERIAL_SH_SCI_DMA=y CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_SERIAL_VT8500=y CONFIG_SERIAL_VT8500_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_OMAP=y CONFIG_SERIAL_OMAP_CONSOLE=y +CONFIG_SERIAL_BCM63XX=y +CONFIG_SERIAL_BCM63XX_CONSOLE=y CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_SERIAL_FSL_LPUART=y @@ -365,12 +337,10 @@ CONFIG_SERIAL_ST_ASC_CONSOLE=y CONFIG_SERIAL_STM32=y CONFIG_SERIAL_STM32_CONSOLE=y CONFIG_SERIAL_DEV_BUS=y -CONFIG_HVC_DRIVER=y CONFIG_VIRTIO_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_ST=y CONFIG_I2C_CHARDEV=y -CONFIG_I2C_DAVINCI=y -CONFIG_I2C_MESON=y -CONFIG_I2C_MUX=y CONFIG_I2C_ARB_GPIO_CHALLENGE=m CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y @@ -378,12 +348,13 @@ CONFIG_I2C_DEMUX_PINCTRL=y CONFIG_I2C_AT91=m CONFIG_I2C_BCM2835=y CONFIG_I2C_CADENCE=y +CONFIG_I2C_DAVINCI=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DIGICOLOR=m CONFIG_I2C_EMEV2=m CONFIG_I2C_GPIO=m -CONFIG_I2C_EXYNOS5=y CONFIG_I2C_IMX=y +CONFIG_I2C_MESON=y CONFIG_I2C_MV64XXX=y CONFIG_I2C_RIIC=y CONFIG_I2C_RK3X=y @@ -427,7 +398,6 @@ CONFIG_SPI_SPIDEV=y CONFIG_SPMI=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_PALMAS=y -CONFIG_PINCTRL_BCM2835=y CONFIG_PINCTRL_APQ8064=y CONFIG_PINCTRL_APQ8084=y CONFIG_PINCTRL_IPQ8064=y @@ -437,25 +407,33 @@ CONFIG_PINCTRL_MSM8X74=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_QCOM_SSBI_PMIC=y -CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_DWAPB=y CONFIG_GPIO_EM=y CONFIG_GPIO_RCAR=y +CONFIG_GPIO_SYSCON=y CONFIG_GPIO_UNIPHIER=y CONFIG_GPIO_XILINX=y CONFIG_GPIO_ZYNQ=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_PCF857X=y -CONFIG_GPIO_TWL4030=y CONFIG_GPIO_PALMAS=y -CONFIG_GPIO_SYSCON=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y +CONFIG_GPIO_TWL4030=y +CONFIG_POWER_AVS=y +CONFIG_ROCKCHIP_IODOMAIN=y +CONFIG_POWER_RESET_AS3722=y +CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_RESET_GPIO_RESTART=y +CONFIG_POWER_RESET_ST=y +CONFIG_POWER_RESET_KEYSTONE=y +CONFIG_POWER_RESET_RMOBILE=y CONFIG_BATTERY_ACT8945A=y CONFIG_BATTERY_CPCAP=m CONFIG_BATTERY_SBS=y +CONFIG_AXP20X_POWER=m CONFIG_BATTERY_MAX17040=m CONFIG_BATTERY_MAX17042=m CONFIG_CHARGER_CPCAP=m @@ -464,15 +442,6 @@ CONFIG_CHARGER_MAX77693=m CONFIG_CHARGER_MAX8997=m CONFIG_CHARGER_MAX8998=m CONFIG_CHARGER_TPS65090=y -CONFIG_AXP20X_POWER=m -CONFIG_POWER_RESET_AS3722=y -CONFIG_POWER_RESET_GPIO=y -CONFIG_POWER_RESET_GPIO_RESTART=y -CONFIG_POWER_RESET_KEYSTONE=y -CONFIG_POWER_RESET_RMOBILE=y -CONFIG_POWER_RESET_ST=y -CONFIG_POWER_AVS=y -CONFIG_ROCKCHIP_IODOMAIN=y CONFIG_SENSORS_IIO_HWMON=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y @@ -480,14 +449,12 @@ CONFIG_SENSORS_NTC_THERMISTOR=m CONFIG_SENSORS_PWM_FAN=m CONFIG_SENSORS_INA2XX=m CONFIG_CPU_THERMAL=y -CONFIG_BCM2835_THERMAL=m -CONFIG_BRCMSTB_THERMAL=m CONFIG_IMX_THERMAL=y CONFIG_ROCKCHIP_THERMAL=y CONFIG_RCAR_THERMAL=y CONFIG_ARMADA_THERMAL=y -CONFIG_DAVINCI_WATCHDOG=m -CONFIG_EXYNOS_THERMAL=m +CONFIG_BCM2835_THERMAL=m +CONFIG_BRCMSTB_THERMAL=m CONFIG_ST_THERMAL_MEMMAP=y CONFIG_WATCHDOG=y CONFIG_DA9063_WATCHDOG=m @@ -495,20 +462,24 @@ CONFIG_XILINX_WATCHDOG=y CONFIG_ARM_SP805_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_SAMA5D4_WATCHDOG=y +CONFIG_DW_WATCHDOG=y +CONFIG_DAVINCI_WATCHDOG=m CONFIG_ORION_WATCHDOG=y CONFIG_RN5T618_WATCHDOG=y -CONFIG_ST_LPC_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_IMX2_WDT=y +CONFIG_ST_LPC_WATCHDOG=y CONFIG_TEGRA_WATCHDOG=m CONFIG_MESON_WATCHDOG=y -CONFIG_DW_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y CONFIG_RENESAS_WDT=m -CONFIG_BCM2835_WDT=y CONFIG_BCM47XX_WDT=y -CONFIG_BCM7038_WDT=m +CONFIG_BCM2835_WDT=y CONFIG_BCM_KONA_WDT=y +CONFIG_BCM7038_WDT=m +CONFIG_BCMA_HOST_SOC=y +CONFIG_BCMA_DRIVER_GMAC_CMN=y +CONFIG_BCMA_DRIVER_GPIO=y CONFIG_MFD_ACT8945A=y CONFIG_MFD_AS3711=y CONFIG_MFD_AS3722=y @@ -516,7 +487,6 @@ CONFIG_MFD_ATMEL_FLEXCOM=y CONFIG_MFD_ATMEL_HLCDC=m CONFIG_MFD_BCM590XX=y CONFIG_MFD_AC100=y -CONFIG_MFD_AXP20X=y CONFIG_MFD_AXP20X_I2C=y CONFIG_MFD_AXP20X_RSB=y CONFIG_MFD_CROS_EC=m @@ -529,11 +499,11 @@ CONFIG_MFD_MAX77693=m CONFIG_MFD_MAX8907=y CONFIG_MFD_MAX8997=y CONFIG_MFD_MAX8998=y -CONFIG_MFD_RK808=y CONFIG_MFD_CPCAP=y CONFIG_MFD_PM8XXX=y CONFIG_MFD_QCOM_RPM=y CONFIG_MFD_SPMI_PMIC=y +CONFIG_MFD_RK808=y CONFIG_MFD_RN5T618=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_STMPE=y @@ -543,10 +513,10 @@ CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65218=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y -CONFIG_REGULATOR_ACT8945A=y -CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_ACT8865=y +CONFIG_REGULATOR_ACT8945A=y CONFIG_REGULATOR_ANATOP=y +CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_AS3711=y CONFIG_REGULATOR_AS3722=y CONFIG_REGULATOR_AXP20X=y @@ -554,10 +524,7 @@ CONFIG_REGULATOR_BCM590XX=y CONFIG_REGULATOR_CPCAP=y CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_FAN53555=y -CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_GPIO=y -CONFIG_MFD_SYSCON=y -CONFIG_POWER_RESET_SYSCON=y CONFIG_REGULATOR_LP872X=y CONFIG_REGULATOR_MAX14577=m CONFIG_REGULATOR_MAX8907=y @@ -571,7 +538,8 @@ CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_PBIAS=y CONFIG_REGULATOR_PWM=y CONFIG_REGULATOR_QCOM_RPM=y -CONFIG_REGULATOR_QCOM_SMD_RPM=y +CONFIG_REGULATOR_QCOM_SMD_RPM=m +CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_RN5T618=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y @@ -592,18 +560,17 @@ CONFIG_MEDIA_CEC_SUPPORT=y CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_MEDIA_USB_SUPPORT=y -CONFIG_USB_VIDEO_CLASS=y -CONFIG_USB_GSPCA=y +CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_PLATFORM=m -CONFIG_VIDEO_RCAR_VIN=m -CONFIG_VIDEO_ATMEL_ISI=m CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m CONFIG_VIDEO_S5P_FIMC=m CONFIG_VIDEO_S5P_MIPI_CSIS=m CONFIG_VIDEO_EXYNOS_FIMC_LITE=m CONFIG_VIDEO_EXYNOS4_FIMC_IS=m +CONFIG_VIDEO_RCAR_VIN=m +CONFIG_VIDEO_ATMEL_ISI=m CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m CONFIG_VIDEO_SAMSUNG_S5P_MFC=m @@ -614,19 +581,15 @@ CONFIG_VIDEO_STI_DELTA=m CONFIG_VIDEO_RENESAS_JPU=m CONFIG_VIDEO_RENESAS_VSP1=m CONFIG_V4L_TEST_DRIVERS=y +CONFIG_VIDEO_VIVID=m CONFIG_CEC_PLATFORM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_CEC=m # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_ADV7180=m CONFIG_VIDEO_ML86V7667=m CONFIG_DRM=y -CONFIG_DRM_I2C_ADV7511=m -CONFIG_DRM_I2C_ADV7511_AUDIO=y # CONFIG_DRM_I2C_CH7006 is not set # CONFIG_DRM_I2C_SIL164 is not set -CONFIG_DRM_DUMB_VGA_DAC=m -CONFIG_DRM_NXP_PTN3460=m -CONFIG_DRM_PARADE_PS8622=m CONFIG_DRM_NOUVEAU=m CONFIG_DRM_EXYNOS=m CONFIG_DRM_EXYNOS_FIMD=y @@ -645,13 +608,18 @@ CONFIG_DRM_RCAR_LVDS=y CONFIG_DRM_SUN4I=m CONFIG_DRM_FSL_DCU=m CONFIG_DRM_TEGRA=y +CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_SAMSUNG_LD9040=m CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m -CONFIG_DRM_PANEL_SIMPLE=y +CONFIG_DRM_DUMB_VGA_DAC=m +CONFIG_DRM_NXP_PTN3460=m +CONFIG_DRM_PARADE_PS8622=m CONFIG_DRM_SII9234=m +CONFIG_DRM_I2C_ADV7511=m +CONFIG_DRM_I2C_ADV7511_AUDIO=y CONFIG_DRM_STI=m -CONFIG_DRM_VC4=y +CONFIG_DRM_VC4=m CONFIG_DRM_ETNAVIV=m CONFIG_DRM_MXSFB=m CONFIG_FB_ARMCLCD=y @@ -659,8 +627,6 @@ CONFIG_FB_EFI=y CONFIG_FB_WM8505=y CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FB_SIMPLE=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=m CONFIG_BACKLIGHT_PWM=y CONFIG_BACKLIGHT_AS3711=y @@ -668,7 +634,6 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_SOUND=m CONFIG_SND=m -CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_HDA_TEGRA=m CONFIG_SND_HDA_INPUT_BEEP=y CONFIG_SND_HDA_PATCH_LOADER=y @@ -692,7 +657,7 @@ CONFIG_SND_SOC_SNOW=m CONFIG_SND_SOC_ODROID=m CONFIG_SND_SOC_SH4_FSI=m CONFIG_SND_SOC_RCAR=m -CONFIG_SND_SIMPLE_SCU_CARD=m +CONFIG_SND_SOC_STI=m CONFIG_SND_SUN4I_CODEC=m CONFIG_SND_SOC_TEGRA=m CONFIG_SND_SOC_TEGRA20_I2S=m @@ -703,31 +668,25 @@ CONFIG_SND_SOC_TEGRA_WM8903=m CONFIG_SND_SOC_TEGRA_WM9712=m CONFIG_SND_SOC_TEGRA_TRIMSLICE=m CONFIG_SND_SOC_TEGRA_ALC5632=m -CONFIG_SND_SOC_CPCAP=m CONFIG_SND_SOC_TEGRA_MAX98090=m CONFIG_SND_SOC_AK4642=m +CONFIG_SND_SOC_CPCAP=m CONFIG_SND_SOC_SGTL5000=m CONFIG_SND_SOC_SPDIF=m -CONFIG_SND_SOC_WM8978=m -CONFIG_SND_SOC_STI=m CONFIG_SND_SOC_STI_SAS=m -CONFIG_SND_SIMPLE_CARD=m +CONFIG_SND_SOC_WM8978=m +CONFIG_SND_SIMPLE_SCU_CARD=m CONFIG_USB=y CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_MVEBU=y -CONFIG_USB_XHCI_RCAR=m CONFIG_USB_XHCI_TEGRA=m CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_MSM=m -CONFIG_USB_EHCI_EXYNOS=y -CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_EHCI_HCD_STI=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_ISP1760=y +CONFIG_USB_EHCI_TEGRA=y +CONFIG_USB_EHCI_EXYNOS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_STI=y -CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_OHCI_EXYNOS=m CONFIG_USB_R8A66597_HCD=m CONFIG_USB_RENESAS_USBHS=m @@ -746,18 +705,18 @@ CONFIG_USB_TI_CPPI41_DMA=y CONFIG_USB_TUSB_OMAP_DMA=y CONFIG_USB_DWC3=y CONFIG_USB_DWC2=y -CONFIG_USB_HSIC_USB3503=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_ISP1760=y +CONFIG_USB_HSIC_USB3503=y CONFIG_AB8500_USB=y -CONFIG_KEYSTONE_USB_PHY=y +CONFIG_KEYSTONE_USB_PHY=m CONFIG_NOP_USB_XCEIV=m CONFIG_AM335X_PHY_USB=m CONFIG_TWL6030_USB=m CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y -CONFIG_USB_MSM_OTG=m CONFIG_USB_MXS_PHY=y CONFIG_USB_GADGET=y CONFIG_USB_FSL_USB2=y @@ -793,21 +752,20 @@ CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_DOVE=y CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_SDHCI_PXAV3=y CONFIG_MMC_SDHCI_SPEAR=y -CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_SDHCI_S3C_DMA=y CONFIG_MMC_SDHCI_BCM_KONA=y +CONFIG_MMC_MESON_MX_SDIO=y CONFIG_MMC_SDHCI_ST=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_ATMELMCI=y CONFIG_MMC_SDHCI_MSM=y -CONFIG_MMC_MESON_MX_SDIO=y CONFIG_MMC_MVSDIO=y CONFIG_MMC_SDHI=y CONFIG_MMC_DW=y -CONFIG_MMC_DW_PLTFM=y CONFIG_MMC_DW_EXYNOS=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SH_MMCIF=y @@ -847,94 +805,85 @@ CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_RK808=m CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_BQ32K=m -CONFIG_RTC_DRV_PALMAS=y -CONFIG_RTC_DRV_ST_LPC=y CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_TPS6586X=y CONFIG_RTC_DRV_TPS65910=y CONFIG_RTC_DRV_S35390A=m CONFIG_RTC_DRV_RX8581=m CONFIG_RTC_DRV_EM3027=y +CONFIG_RTC_DRV_S5M=m CONFIG_RTC_DRV_DA9063=m CONFIG_RTC_DRV_EFI=m CONFIG_RTC_DRV_DIGICOLOR=m -CONFIG_RTC_DRV_S5M=m CONFIG_RTC_DRV_S3C=m CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_AT91RM9200=m CONFIG_RTC_DRV_AT91SAM9=m CONFIG_RTC_DRV_VT8500=y -CONFIG_RTC_DRV_SUN6I=y CONFIG_RTC_DRV_SUNXI=y CONFIG_RTC_DRV_MV=y CONFIG_RTC_DRV_TEGRA=y +CONFIG_RTC_DRV_ST_LPC=y CONFIG_RTC_DRV_CPCAP=m CONFIG_DMADEVICES=y -CONFIG_DW_DMAC=y CONFIG_AT_HDMAC=y CONFIG_AT_XDMAC=y +CONFIG_DMA_BCM2835=y +CONFIG_DMA_SUN6I=y CONFIG_FSL_EDMA=y +CONFIG_IMX_DMA=y +CONFIG_IMX_SDMA=y CONFIG_MV_XOR=y +CONFIG_MXS_DMA=y +CONFIG_PL330_DMA=y +CONFIG_SIRF_DMA=y +CONFIG_STE_DMA40=y +CONFIG_ST_FDMA=m CONFIG_TEGRA20_APB_DMA=y +CONFIG_XILINX_DMA=y +CONFIG_QCOM_BAM_DMA=y +CONFIG_DW_DMAC=y CONFIG_SH_DMAE=y CONFIG_RCAR_DMAC=y CONFIG_RENESAS_USB_DMAC=m -CONFIG_STE_DMA40=y -CONFIG_SIRF_DMA=y -CONFIG_TI_EDMA=y -CONFIG_PL330_DMA=y -CONFIG_IMX_SDMA=y -CONFIG_IMX_DMA=y -CONFIG_MXS_DMA=y -CONFIG_DMA_BCM2835=y -CONFIG_DMA_OMAP=y -CONFIG_QCOM_BAM_DMA=y -CONFIG_XILINX_DMA=y -CONFIG_DMA_SUN6I=y -CONFIG_ST_FDMA=m +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_MMIO=y CONFIG_STAGING=y -CONFIG_SENSORS_ISL29018=y -CONFIG_SENSORS_ISL29028=y CONFIG_MFD_NVEC=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y -CONFIG_BCMA=y -CONFIG_BCMA_HOST_SOC=y -CONFIG_BCMA_DRIVER_GMAC_CMN=y -CONFIG_BCMA_DRIVER_GPIO=y -CONFIG_QCOM_GSBI=y -CONFIG_QCOM_PM=y -CONFIG_QCOM_SMEM=y -CONFIG_QCOM_SMD_RPM=y -CONFIG_QCOM_SMP2P=y -CONFIG_QCOM_SMSM=y -CONFIG_QCOM_WCNSS_CTRL=m -CONFIG_ROCKCHIP_PM_DOMAINS=y -CONFIG_COMMON_CLK_QCOM=y -CONFIG_QCOM_CLK_RPM=y -CONFIG_CHROME_PLATFORMS=y CONFIG_STAGING_BOARD=y -CONFIG_CROS_EC_CHARDEV=m CONFIG_COMMON_CLK_MAX77686=y CONFIG_COMMON_CLK_RK808=m CONFIG_COMMON_CLK_S2MPS11=m +CONFIG_COMMON_CLK_QCOM=y +CONFIG_QCOM_CLK_RPM=y CONFIG_APQ_MMCC_8084=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y -CONFIG_HWSPINLOCK_QCOM=y +CONFIG_BCM2835_MBOX=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_REMOTEPROC=m CONFIG_ST_REMOTEPROC=m CONFIG_RPMSG_VIRTIO=m +CONFIG_RASPBERRYPI_POWER=y +CONFIG_QCOM_GSBI=y +CONFIG_QCOM_PM=y +CONFIG_QCOM_SMD_RPM=m +CONFIG_QCOM_WCNSS_CTRL=m +CONFIG_ROCKCHIP_PM_DOMAINS=y +CONFIG_ARCH_TEGRA_2x_SOC=y +CONFIG_ARCH_TEGRA_3x_SOC=y +CONFIG_ARCH_TEGRA_114_SOC=y +CONFIG_ARCH_TEGRA_124_SOC=y CONFIG_PM_DEVFREQ=y CONFIG_ARM_TEGRA_DEVFREQ=m -CONFIG_MEMORY=y -CONFIG_EXTCON=y CONFIG_TI_AEMIF=y CONFIG_IIO=y CONFIG_IIO_SW_TRIGGER=y @@ -947,56 +896,54 @@ CONFIG_VF610_ADC=m CONFIG_XILINX_XADC=y CONFIG_MPU3050_I2C=y CONFIG_CM36651=m +CONFIG_SENSORS_ISL29018=y +CONFIG_SENSORS_ISL29028=y CONFIG_AK8975=y -CONFIG_RASPBERRYPI_POWER=y CONFIG_IIO_HRTIMER_TRIGGER=y CONFIG_PWM=y CONFIG_PWM_ATMEL=m CONFIG_PWM_ATMEL_HLCDC_PWM=m CONFIG_PWM_ATMEL_TCB=m +CONFIG_PWM_BCM2835=y +CONFIG_PWM_BRCMSTB=m CONFIG_PWM_FSL_FTM=m CONFIG_PWM_MESON=m CONFIG_PWM_RCAR=m CONFIG_PWM_RENESAS_TPU=y CONFIG_PWM_ROCKCHIP=m CONFIG_PWM_SAMSUNG=m +CONFIG_PWM_STI=y CONFIG_PWM_SUN4I=y CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y +CONFIG_KEYSTONE_IRQ=y +CONFIG_PHY_SUN4I_USB=y +CONFIG_PHY_SUN9I_USB=y CONFIG_PHY_HIX5HD2_SATA=y -CONFIG_E1000E=y -CONFIG_PWM_STI=y -CONFIG_PWM_BCM2835=y -CONFIG_PWM_BRCMSTB=m -CONFIG_PHY_DM816X_USB=m -CONFIG_OMAP_USB2=y -CONFIG_TI_PIPE3=y -CONFIG_TWL4030_USB=m +CONFIG_PHY_BERLIN_SATA=y CONFIG_PHY_BERLIN_USB=y CONFIG_PHY_CPCAP_USB=m -CONFIG_PHY_BERLIN_SATA=y +CONFIG_PHY_QCOM_APQ8064_SATA=m +CONFIG_PHY_RCAR_GEN2=m CONFIG_PHY_ROCKCHIP_DP=m CONFIG_PHY_ROCKCHIP_USB=y -CONFIG_PHY_QCOM_APQ8064_SATA=m +CONFIG_PHY_SAMSUNG_USB2=m CONFIG_PHY_MIPHY28LP=y -CONFIG_PHY_RCAR_GEN2=m CONFIG_PHY_STIH407_USB=y CONFIG_PHY_STM32_USBPHYC=y -CONFIG_PHY_SUN4I_USB=y -CONFIG_PHY_SUN9I_USB=y -CONFIG_PHY_SAMSUNG_USB2=m CONFIG_PHY_TEGRA_XUSB=y -CONFIG_PHY_BRCM_SATA=y -CONFIG_NVMEM=y +CONFIG_PHY_DM816X_USB=m +CONFIG_OMAP_USB2=y +CONFIG_TI_PIPE3=y +CONFIG_TWL4030_USB=m CONFIG_NVMEM_IMX_OCOTP=y CONFIG_NVMEM_SUNXI_SID=y CONFIG_NVMEM_VF610_OCOTP=y -CONFIG_BCM2835_MBOX=y CONFIG_RASPBERRYPI_FIRMWARE=y -CONFIG_EFI_VARS=m -CONFIG_EFI_CAPSULE_LOADER=m CONFIG_BCM47XX_NVRAM=y CONFIG_BCM47XX_SPROM=y +CONFIG_EFI_VARS=m +CONFIG_EFI_CAPSULE_LOADER=m CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y @@ -1004,7 +951,6 @@ CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_UBIFS_FS=y -CONFIG_TMPFS=y CONFIG_SQUASHFS=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y @@ -1020,13 +966,7 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOCKUP_DETECTOR=y -CONFIG_CPUFREQ_DT=y -CONFIG_KEYSTONE_IRQ=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_ST=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m @@ -1035,27 +975,19 @@ CONFIG_CRYPTO_USER_API_AEAD=m CONFIG_CRYPTO_DEV_MARVELL_CESA=m CONFIG_CRYPTO_DEV_EXYNOS_RNG=m CONFIG_CRYPTO_DEV_S5P=m +CONFIG_CRYPTO_DEV_ATMEL_AES=m +CONFIG_CRYPTO_DEV_ATMEL_TDES=m +CONFIG_CRYPTO_DEV_ATMEL_SHA=m CONFIG_CRYPTO_DEV_SUN4I_SS=m CONFIG_CRYPTO_DEV_ROCKCHIP=m CONFIG_ARM_CRYPTO=y -CONFIG_CRYPTO_SHA1_ARM=m CONFIG_CRYPTO_SHA1_ARM_NEON=m CONFIG_CRYPTO_SHA1_ARM_CE=m CONFIG_CRYPTO_SHA2_ARM_CE=m -CONFIG_CRYPTO_SHA256_ARM=m CONFIG_CRYPTO_SHA512_ARM=m CONFIG_CRYPTO_AES_ARM=m CONFIG_CRYPTO_AES_ARM_BS=m CONFIG_CRYPTO_AES_ARM_CE=m -CONFIG_CRYPTO_CHACHA20_NEON=m -CONFIG_CRYPTO_CRC32_ARM_CE=m -CONFIG_CRYPTO_CRCT10DIF_ARM_CE=m CONFIG_CRYPTO_GHASH_ARM_CE=m -CONFIG_CRYPTO_DEV_ATMEL_AES=m -CONFIG_CRYPTO_DEV_ATMEL_TDES=m -CONFIG_CRYPTO_DEV_ATMEL_SHA=m -CONFIG_VIDEO_VIVID=m -CONFIG_VIRTIO=y -CONFIG_VIRTIO_PCI=y -CONFIG_VIRTIO_PCI_LEGACY=y -CONFIG_VIRTIO_MMIO=y +CONFIG_CRYPTO_CRC32_ARM_CE=m +CONFIG_CRYPTO_CHACHA20_NEON=m -- cgit v1.2.3 From 0fff9001840c314fa4473dee256976b1e4535e73 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Jun 2018 11:25:16 +0200 Subject: ARM: Always build secure_cntvoff.S on ARM V7 to fix shmobile !SMP build If CONFIG_SMP=n, building a kernel for R-Car Gen2 fails with: arch/arm/mach-shmobile/setup-rcar-gen2.o: In function `rcar_gen2_timer_init': setup-rcar-gen2.c:(.init.text+0x30): undefined reference to `secure_cntvoff_init' Indeed, on R-Car Gen2 SoCs, secure_cntvoff_init() is not only needed for secondary CPUs, but also for the boot CPU. This is most visible on SoCs with Cortex A7 cores (e.g. R-Car E2, cfr. commit 9ce3fa6816c2fb59 ("ARM: shmobile: rcar-gen2: Add CA7 arch_timer initialization for r8a7794")), but Cortex A15 is affected, too. Fix this by always providing secure_cntvoff_init() when building for ARM V7. Reported-by: Arnd Bergmann Fixes: 7c607944bc657616 ("ARM: smp: Add initialization of CNTVOFF") Fixes: cad160ed0a94927e ("ARM: shmobile: Convert file to use cntvoff") Signed-off-by: Geert Uytterhoeven Reviewed-by: Maxime Ripard Reviewed-by: Simon Horman Signed-off-by: Olof Johansson --- arch/arm/common/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 1e9f7af8f70f..3157be413297 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_DMABOUNCE) += dmabounce.o obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o -obj-$(CONFIG_SMP) += secure_cntvoff.o +obj-$(CONFIG_CPU_V7) += secure_cntvoff.o obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o CFLAGS_REMOVE_mcpm_entry.o = -pg -- cgit v1.2.3 From 13399ff25f179811ce9c1df1523eb39f9e4a4772 Mon Sep 17 00:00:00 2001 From: Tomasz Duszynski Date: Mon, 28 May 2018 17:38:59 +0200 Subject: iio: pressure: bmp280: fix relative humidity unit According to IIO ABI relative humidity reading should be returned in milli percent. This patch addresses that by applying proper scaling and returning integer instead of fractional format type specifier. Note that the fixes tag is before the driver was heavily refactored to introduce spi support, so the patch won't apply that far back. Signed-off-by: Tomasz Duszynski Fixes: 14beaa8f5ab1 ("iio: pressure: bmp280: add humidity support") Acked-by: Matt Ranostay Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/bmp280-core.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 5ec3e41b65f2..fe87d27779d9 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -415,10 +415,9 @@ static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2) } comp_humidity = bmp280_compensate_humidity(data, adc_humidity); - *val = comp_humidity; - *val2 = 1024; + *val = comp_humidity * 1000 / 1024; - return IIO_VAL_FRACTIONAL; + return IIO_VAL_INT; } static int bmp280_read_raw(struct iio_dev *indio_dev, -- cgit v1.2.3 From 288320f6e9a254bb595b4783c9bdfcc7c0e73153 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 30 May 2018 19:19:36 +0100 Subject: iio: tsl2x7x/tsl2772: avoid potential division by zero It may be possible for tsl2772_get_lux to return a zero lux value and hence a division by zero can occur when lux_val is zero. Check for this case and return -ERANGE to avoid the division by zero. Detected by CoverityScan, CID#1469484 ("Division or modulo by zero") Signed-off-by: Colin Ian King Acked-by: Brian Masney Signed-off-by: Jonathan Cameron --- drivers/iio/light/tsl2772.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/light/tsl2772.c b/drivers/iio/light/tsl2772.c index 34d42a2504c9..df5b2a0da96c 100644 --- a/drivers/iio/light/tsl2772.c +++ b/drivers/iio/light/tsl2772.c @@ -582,6 +582,8 @@ static int tsl2772_als_calibrate(struct iio_dev *indio_dev) "%s: failed to get lux\n", __func__); return lux_val; } + if (lux_val == 0) + return -ERANGE; ret = (chip->settings.als_cal_target * chip->settings.als_gain_trim) / lux_val; -- cgit v1.2.3 From b02ec67a8e38875cdc5f9214be885022f11c0017 Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Thu, 7 Jun 2018 21:52:50 +0300 Subject: iio: mma8452: Fix ignoring MMA8452_INT_DRDY Interrupts are ignored if no event bit is set in the status status register and this breaks the buffer interface. No data is shown when running "iio_generic_buffer -n mma8451 -a" and interrupt counts go crazy. Fix by not returning IRQ_NONE if DRDY is set. Fixes: 605f72de137a ("iio: accel: mma8452: improvements to handle multiple events") Signed-off-by: Leonard Crestez cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mma8452.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index 7e3d82cff3d5..c149c9c360fc 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -1053,7 +1053,7 @@ static irqreturn_t mma8452_interrupt(int irq, void *p) if (src < 0) return IRQ_NONE; - if (!(src & data->chip_info->enabled_events)) + if (!(src & (data->chip_info->enabled_events | MMA8452_INT_DRDY))) return IRQ_NONE; if (src & MMA8452_INT_DRDY) { -- cgit v1.2.3 From 92397a6c38d139d50fabbe9e2dc09b61d53b2377 Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Tue, 5 Jun 2018 14:15:10 +0800 Subject: iio: buffer: fix the function signature to match implementation linux/iio/buffer-dma.h was not updated to when length was changed to unsigned int. Fixes: c043ec1ca5ba ("iio:buffer: make length types match kfifo types") Signed-off-by: Phil Reid Signed-off-by: Jonathan Cameron --- include/linux/iio/buffer-dma.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/iio/buffer-dma.h b/include/linux/iio/buffer-dma.h index 767467d886de..67c75372b691 100644 --- a/include/linux/iio/buffer-dma.h +++ b/include/linux/iio/buffer-dma.h @@ -141,7 +141,7 @@ int iio_dma_buffer_read(struct iio_buffer *buffer, size_t n, char __user *user_buffer); size_t iio_dma_buffer_data_available(struct iio_buffer *buffer); int iio_dma_buffer_set_bytes_per_datum(struct iio_buffer *buffer, size_t bpd); -int iio_dma_buffer_set_length(struct iio_buffer *buffer, int length); +int iio_dma_buffer_set_length(struct iio_buffer *buffer, unsigned int length); int iio_dma_buffer_request_update(struct iio_buffer *buffer); int iio_dma_buffer_init(struct iio_dma_buffer_queue *queue, -- cgit v1.2.3 From 2a221c04228bbf683fc8d3cb5d177aebb38b393c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 18 Jun 2018 18:09:36 +0200 Subject: iio: imu: inv_mpu6050: Fix probe() failure on older ACPI based machines Commit 5ec6486daa98 ("iio:imu: inv_mpu6050: support more interrupt types") causes inv_mpu_core_probe() to fail if the IRQ does not have a trigger-type setup. This happens on machines where the mpu6050 is enumerated through ACPI and an older Interrupt type ACPI resource is used for the interrupt, rather then a GpioInt type type, causing the mpu6050 driver to no longer work there. This happens on e.g. the Asus T100TA. This commits makes the mpu6050 fallback to the old IRQF_TRIGGER_RISING default if the irq-type is not setup, fixing this. Signed-off-by: Hans de Goede Fixes: 5ec6486daa98 ("iio:imu: inv_mpu6050: support more interrupt types") Reviewed-by: Martin Kelly Reviewed-by: Jean-Baptiste Maneyrol Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index f9c0624505a2..42618fe4f83e 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -959,6 +959,8 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, } irq_type = irqd_get_trigger_type(desc); + if (!irq_type) + irq_type = IRQF_TRIGGER_RISING; if (irq_type == IRQF_TRIGGER_RISING) st->irq_mask = INV_MPU6050_ACTIVE_HIGH; else if (irq_type == IRQF_TRIGGER_FALLING) -- cgit v1.2.3 From 12dfa2f68ab659636e092db13b5d17cf9aac82af Mon Sep 17 00:00:00 2001 From: Ping-Ke Shih Date: Fri, 22 Jun 2018 13:31:57 +0800 Subject: rtlwifi: Fix kernel Oops "Fw download fail!!" When connecting to AP, mac80211 asks driver to enter and leave PS quickly, but driver deinit doesn't wait for delayed work complete when entering PS, then driver reinit procedure and delay work are running simultaneously. This will cause unpredictable kernel oops or crash like rtl8723be: error H2C cmd because of Fw download fail!!! WARNING: CPU: 3 PID: 159 at drivers/net/wireless/realtek/rtlwifi/ rtl8723be/fw.c:227 rtl8723be_fill_h2c_cmd+0x182/0x510 [rtl8723be] CPU: 3 PID: 159 Comm: kworker/3:2 Tainted: G O 4.16.13-2-ARCH #1 Hardware name: ASUSTeK COMPUTER INC. X556UF/X556UF, BIOS X556UF.406 10/21/2016 Workqueue: rtl8723be_pci rtl_c2hcmd_wq_callback [rtlwifi] RIP: 0010:rtl8723be_fill_h2c_cmd+0x182/0x510 [rtl8723be] RSP: 0018:ffffa6ab01e1bd70 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa26069071520 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff8be70e9c RDI: 00000000ffffffff RBP: 0000000000000000 R08: 0000000000000048 R09: 0000000000000348 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffffa26069071520 R14: 0000000000000000 R15: ffffa2607d205f70 FS: 0000000000000000(0000) GS:ffffa26081d80000(0000) knlGS:000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000443b39d3000 CR3: 000000037700a005 CR4: 00000000003606e0 Call Trace: ? halbtc_send_bt_mp_operation.constprop.17+0xd5/0xe0 [btcoexist] ? ex_btc8723b1ant_bt_info_notify+0x3b8/0x820 [btcoexist] ? rtl_c2hcmd_launcher+0xab/0x110 [rtlwifi] ? process_one_work+0x1d1/0x3b0 ? worker_thread+0x2b/0x3d0 ? process_one_work+0x3b0/0x3b0 ? kthread+0x112/0x130 ? kthread_create_on_node+0x60/0x60 ? ret_from_fork+0x35/0x40 Code: 00 76 b4 e9 e2 fe ff ff 4c 89 ee 4c 89 e7 e8 56 22 86 ca e9 5e ... This patch ensures all delayed works done before entering PS to satisfy our expectation, so use cancel_delayed_work_sync() instead. An exception is delayed work ips_nic_off_wq because running task may be itself, so add a parameter ips_wq to deinit function to handle this case. This issue is reported and fixed in below threads: https://github.com/lwfinger/rtlwifi_new/issues/367 https://github.com/lwfinger/rtlwifi_new/issues/366 Tested-by: Evgeny Kapun # 8723DE Tested-by: Shivam Kakkar # 8723BE on 4.18-rc1 Signed-off-by: Ping-Ke Shih Fixes: cceb0a597320 ("rtlwifi: Add work queue for c2h cmd.") Cc: Stable # 4.11+ Reviewed-by: Larry Finger Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtlwifi/base.c | 17 ++++++++++------- drivers/net/wireless/realtek/rtlwifi/base.h | 2 +- drivers/net/wireless/realtek/rtlwifi/core.c | 2 +- drivers/net/wireless/realtek/rtlwifi/pci.c | 2 +- drivers/net/wireless/realtek/rtlwifi/ps.c | 4 ++-- drivers/net/wireless/realtek/rtlwifi/usb.c | 2 +- 6 files changed, 16 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/base.c b/drivers/net/wireless/realtek/rtlwifi/base.c index 39c817eddd78..54c9f6ab0c8c 100644 --- a/drivers/net/wireless/realtek/rtlwifi/base.c +++ b/drivers/net/wireless/realtek/rtlwifi/base.c @@ -484,18 +484,21 @@ static void _rtl_init_deferred_work(struct ieee80211_hw *hw) } -void rtl_deinit_deferred_work(struct ieee80211_hw *hw) +void rtl_deinit_deferred_work(struct ieee80211_hw *hw, bool ips_wq) { struct rtl_priv *rtlpriv = rtl_priv(hw); del_timer_sync(&rtlpriv->works.watchdog_timer); - cancel_delayed_work(&rtlpriv->works.watchdog_wq); - cancel_delayed_work(&rtlpriv->works.ips_nic_off_wq); - cancel_delayed_work(&rtlpriv->works.ps_work); - cancel_delayed_work(&rtlpriv->works.ps_rfon_wq); - cancel_delayed_work(&rtlpriv->works.fwevt_wq); - cancel_delayed_work(&rtlpriv->works.c2hcmd_wq); + cancel_delayed_work_sync(&rtlpriv->works.watchdog_wq); + if (ips_wq) + cancel_delayed_work(&rtlpriv->works.ips_nic_off_wq); + else + cancel_delayed_work_sync(&rtlpriv->works.ips_nic_off_wq); + cancel_delayed_work_sync(&rtlpriv->works.ps_work); + cancel_delayed_work_sync(&rtlpriv->works.ps_rfon_wq); + cancel_delayed_work_sync(&rtlpriv->works.fwevt_wq); + cancel_delayed_work_sync(&rtlpriv->works.c2hcmd_wq); } EXPORT_SYMBOL_GPL(rtl_deinit_deferred_work); diff --git a/drivers/net/wireless/realtek/rtlwifi/base.h b/drivers/net/wireless/realtek/rtlwifi/base.h index 912f205779c3..a7ae40eaa3cd 100644 --- a/drivers/net/wireless/realtek/rtlwifi/base.h +++ b/drivers/net/wireless/realtek/rtlwifi/base.h @@ -121,7 +121,7 @@ void rtl_init_rfkill(struct ieee80211_hw *hw); void rtl_deinit_rfkill(struct ieee80211_hw *hw); void rtl_watch_dog_timer_callback(struct timer_list *t); -void rtl_deinit_deferred_work(struct ieee80211_hw *hw); +void rtl_deinit_deferred_work(struct ieee80211_hw *hw, bool ips_wq); bool rtl_action_proc(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx); int rtlwifi_rate_mapping(struct ieee80211_hw *hw, bool isht, diff --git a/drivers/net/wireless/realtek/rtlwifi/core.c b/drivers/net/wireless/realtek/rtlwifi/core.c index cfea57efa7f4..a3f46203ee7a 100644 --- a/drivers/net/wireless/realtek/rtlwifi/core.c +++ b/drivers/net/wireless/realtek/rtlwifi/core.c @@ -196,7 +196,7 @@ static void rtl_op_stop(struct ieee80211_hw *hw) /* reset sec info */ rtl_cam_reset_sec_info(hw); - rtl_deinit_deferred_work(hw); + rtl_deinit_deferred_work(hw, false); } rtlpriv->intf_ops->adapter_stop(hw); diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.c b/drivers/net/wireless/realtek/rtlwifi/pci.c index ae13bcfb3bf0..5d1fda16fc8c 100644 --- a/drivers/net/wireless/realtek/rtlwifi/pci.c +++ b/drivers/net/wireless/realtek/rtlwifi/pci.c @@ -2377,7 +2377,7 @@ void rtl_pci_disconnect(struct pci_dev *pdev) ieee80211_unregister_hw(hw); rtlmac->mac80211_registered = 0; } else { - rtl_deinit_deferred_work(hw); + rtl_deinit_deferred_work(hw, false); rtlpriv->intf_ops->adapter_stop(hw); } rtlpriv->cfg->ops->disable_interrupt(hw); diff --git a/drivers/net/wireless/realtek/rtlwifi/ps.c b/drivers/net/wireless/realtek/rtlwifi/ps.c index 71af24e2e051..479a4cfc245d 100644 --- a/drivers/net/wireless/realtek/rtlwifi/ps.c +++ b/drivers/net/wireless/realtek/rtlwifi/ps.c @@ -71,7 +71,7 @@ bool rtl_ps_disable_nic(struct ieee80211_hw *hw) struct rtl_priv *rtlpriv = rtl_priv(hw); /*<1> Stop all timer */ - rtl_deinit_deferred_work(hw); + rtl_deinit_deferred_work(hw, true); /*<2> Disable Interrupt */ rtlpriv->cfg->ops->disable_interrupt(hw); @@ -292,7 +292,7 @@ void rtl_ips_nic_on(struct ieee80211_hw *hw) struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); enum rf_pwrstate rtstate; - cancel_delayed_work(&rtlpriv->works.ips_nic_off_wq); + cancel_delayed_work_sync(&rtlpriv->works.ips_nic_off_wq); mutex_lock(&rtlpriv->locks.ips_mutex); if (ppsc->inactiveps) { diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c index f9faffc498bc..2ac5004d7a40 100644 --- a/drivers/net/wireless/realtek/rtlwifi/usb.c +++ b/drivers/net/wireless/realtek/rtlwifi/usb.c @@ -1132,7 +1132,7 @@ void rtl_usb_disconnect(struct usb_interface *intf) ieee80211_unregister_hw(hw); rtlmac->mac80211_registered = 0; } else { - rtl_deinit_deferred_work(hw); + rtl_deinit_deferred_work(hw, false); rtlpriv->intf_ops->adapter_stop(hw); } /*deinit rfkill */ -- cgit v1.2.3 From 373c83a801f15b1e3d02d855fad89112bd4ccbe0 Mon Sep 17 00:00:00 2001 From: Michael Trimarchi Date: Wed, 30 May 2018 11:06:34 +0200 Subject: brcmfmac: stop watchdog before detach and free everything Using built-in in kernel image without a firmware in filesystem or in the kernel image can lead to a kernel NULL pointer deference. Watchdog need to be stopped in brcmf_sdio_remove The system is going down NOW! [ 1348.110759] Unable to handle kernel NULL pointer dereference at virtual address 000002f8 Sent SIGTERM to all processes [ 1348.121412] Mem abort info: [ 1348.126962] ESR = 0x96000004 [ 1348.130023] Exception class = DABT (current EL), IL = 32 bits [ 1348.135948] SET = 0, FnV = 0 [ 1348.138997] EA = 0, S1PTW = 0 [ 1348.142154] Data abort info: [ 1348.145045] ISV = 0, ISS = 0x00000004 [ 1348.148884] CM = 0, WnR = 0 [ 1348.151861] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____) [ 1348.158475] [00000000000002f8] pgd=0000000000000000 [ 1348.163364] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 1348.168927] Modules linked in: ipv6 [ 1348.172421] CPU: 3 PID: 1421 Comm: brcmf_wdog/mmc0 Not tainted 4.17.0-rc5-next-20180517 #18 [ 1348.180757] Hardware name: Amarula A64-Relic (DT) [ 1348.185455] pstate: 60000005 (nZCv daif -PAN -UAO) [ 1348.190251] pc : brcmf_sdiod_freezer_count+0x0/0x20 [ 1348.195124] lr : brcmf_sdio_watchdog_thread+0x64/0x290 [ 1348.200253] sp : ffff00000b85be30 [ 1348.203561] x29: ffff00000b85be30 x28: 0000000000000000 [ 1348.208868] x27: ffff00000b6cb918 x26: ffff80003b990638 [ 1348.214176] x25: ffff0000087b1a20 x24: ffff80003b94f800 [ 1348.219483] x23: ffff000008e620c8 x22: ffff000008f0b660 [ 1348.224790] x21: ffff000008c6a858 x20: 00000000fffffe00 [ 1348.230097] x19: ffff80003b94f800 x18: 0000000000000001 [ 1348.235404] x17: 0000ffffab2e8a74 x16: ffff0000080d7de8 [ 1348.240711] x15: 0000000000000000 x14: 0000000000000400 [ 1348.246018] x13: 0000000000000400 x12: 0000000000000001 [ 1348.251324] x11: 00000000000002c4 x10: 0000000000000a10 [ 1348.256631] x9 : ffff00000b85bc40 x8 : ffff80003be11870 [ 1348.261937] x7 : ffff80003dfc7308 x6 : 000000078ff08b55 [ 1348.267243] x5 : 00000139e1058400 x4 : 0000000000000000 [ 1348.272550] x3 : dead000000000100 x2 : 958f2788d6618100 [ 1348.277856] x1 : 00000000fffffe00 x0 : 0000000000000000 Signed-off-by: Michael Trimarchi Acked-by: Arend van Spriel Tested-by: Andy Shevchenko Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index c99a191e8d69..a907d7b065fa 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -4296,6 +4296,13 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus) brcmf_dbg(TRACE, "Enter\n"); if (bus) { + /* Stop watchdog task */ + if (bus->watchdog_tsk) { + send_sig(SIGTERM, bus->watchdog_tsk, 1); + kthread_stop(bus->watchdog_tsk); + bus->watchdog_tsk = NULL; + } + /* De-register interrupt handler */ brcmf_sdiod_intr_unregister(bus->sdiodev); -- cgit v1.2.3 From 7e58e741c001813c02cab17720835d56398f9ffc Mon Sep 17 00:00:00 2001 From: Ganapathi Bhat Date: Fri, 1 Jun 2018 16:11:19 +0530 Subject: Revert "mwifiex: handle race during mwifiex_usb_disconnect" This reverts commit b817047ae70c0bd67b677b65d0d69d72cd6e9728. We have a better fix for this issue, which will be sent on top of this revert. Signed-off-by: Ganapathi Bhat Signed-off-by: Kalle Valo --- drivers/net/wireless/marvell/mwifiex/usb.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/wireless/marvell/mwifiex/usb.c b/drivers/net/wireless/marvell/mwifiex/usb.c index 6e3cf9817730..bc475b83bb15 100644 --- a/drivers/net/wireless/marvell/mwifiex/usb.c +++ b/drivers/net/wireless/marvell/mwifiex/usb.c @@ -644,9 +644,6 @@ static void mwifiex_usb_disconnect(struct usb_interface *intf) MWIFIEX_FUNC_SHUTDOWN); } - if (adapter->workqueue) - flush_workqueue(adapter->workqueue); - mwifiex_usb_free(card); mwifiex_dbg(adapter, FATAL, -- cgit v1.2.3 From f8c095f679625a26efc7bb1b8c4b3c6fcaef4633 Mon Sep 17 00:00:00 2001 From: Ganapathi Bhat Date: Fri, 1 Jun 2018 16:11:20 +0530 Subject: mwifiex: handle race during mwifiex_usb_disconnect Race condition is observed during rmmod of mwifiex_usb: 1. The rmmod thread will call mwifiex_usb_disconnect(), download SHUTDOWN command and do wait_event_interruptible_timeout(), waiting for response. 2. The main thread will handle the response and will do a wake_up_interruptible(), unblocking rmmod thread. 3. On getting unblocked, rmmod thread will make rx_cmd.urb = NULL in mwifiex_usb_free(). 4. The main thread will try to resubmit rx_cmd.urb in mwifiex_usb_submit_rx_urb(), which is NULL. To fix this, move mwifiex_usb_free() from mwifiex_usb_disconnect to mwifiex_unregister_dev(). Function mwifiex_unregister_dev() is called after flushing the command and RX work queues. Suggested-by: Brian Norris Signed-off-by: Ganapathi Bhat Reviewed-by: Brian Norris Signed-off-by: Kalle Valo --- drivers/net/wireless/marvell/mwifiex/usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/marvell/mwifiex/usb.c b/drivers/net/wireless/marvell/mwifiex/usb.c index bc475b83bb15..88f4c89f89ba 100644 --- a/drivers/net/wireless/marvell/mwifiex/usb.c +++ b/drivers/net/wireless/marvell/mwifiex/usb.c @@ -644,8 +644,6 @@ static void mwifiex_usb_disconnect(struct usb_interface *intf) MWIFIEX_FUNC_SHUTDOWN); } - mwifiex_usb_free(card); - mwifiex_dbg(adapter, FATAL, "%s: removing card\n", __func__); mwifiex_remove_card(adapter); @@ -1353,6 +1351,8 @@ static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter) { struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; + mwifiex_usb_free(card); + mwifiex_usb_cleanup_tx_aggr(adapter); card->adapter = NULL; -- cgit v1.2.3 From 92963318a255fd5df94159767cd4750e55d98cb0 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Sat, 9 Jun 2018 12:10:44 +0200 Subject: mt7601u: remove warning when avg_rssi is zero It turned out that we can run calibration without already received frames with RSSI data. In such case just don't update AGC register and don't print the warning. Fixes: b305a6ab0247 ("mt7601u: use EWMA to calculate avg_rssi") Reported-by: Adam Borowski Signed-off-by: Stanislaw Gruszka Acked-by: Jakub Kicinski Signed-off-by: Kalle Valo --- drivers/net/wireless/mediatek/mt7601u/phy.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt7601u/phy.c b/drivers/net/wireless/mediatek/mt7601u/phy.c index 9d2f9a776ef1..b804abd464ae 100644 --- a/drivers/net/wireless/mediatek/mt7601u/phy.c +++ b/drivers/net/wireless/mediatek/mt7601u/phy.c @@ -986,13 +986,15 @@ static void mt7601u_agc_tune(struct mt7601u_dev *dev) */ spin_lock_bh(&dev->con_mon_lock); avg_rssi = ewma_rssi_read(&dev->avg_rssi); - WARN_ON_ONCE(avg_rssi == 0); + spin_unlock_bh(&dev->con_mon_lock); + if (avg_rssi == 0) + return; + avg_rssi = -avg_rssi; if (avg_rssi <= -70) val -= 0x20; else if (avg_rssi <= -60) val -= 0x10; - spin_unlock_bh(&dev->con_mon_lock); if (val != mt7601u_bbp_rr(dev, 66)) mt7601u_bbp_wr(dev, 66, val); -- cgit v1.2.3 From 662d855c66c0a7400f9117b6ac02047942cd1d22 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Sun, 24 Jun 2018 09:33:22 -0700 Subject: MIPS: Add ksig argument to rseq_{signal_deliver,handle_notify_resume} Commit 784e0300fe9f ("rseq: Avoid infinite recursion when delivering SIGSEGV") added a new ksig argument to the rseq_signal_deliver() & rseq_handle_notify_resume() functions, and was merged in v4.18-rc2. Meanwhile MIPS support for restartable sequences was also merged in v4.18-rc2 with commit 9ea141ad5471 ("MIPS: Add support for restartable sequences"), and therefore didn't get updated for the API change. This results in build failures like the following: CC arch/mips/kernel/signal.o arch/mips/kernel/signal.c: In function 'handle_signal': arch/mips/kernel/signal.c:804:22: error: passing argument 1 of 'rseq_signal_deliver' from incompatible pointer type [-Werror=incompatible-pointer-types] rseq_signal_deliver(regs); ^~~~ In file included from ./include/linux/context_tracking.h:5, from arch/mips/kernel/signal.c:12: ./include/linux/sched.h:1811:56: note: expected 'struct ksignal *' but argument is of type 'struct pt_regs *' static inline void rseq_signal_deliver(struct ksignal *ksig, ~~~~~~~~~~~~~~~~^~~~ arch/mips/kernel/signal.c:804:2: error: too few arguments to function 'rseq_signal_deliver' rseq_signal_deliver(regs); ^~~~~~~~~~~~~~~~~~~ Fix this by adding the ksig argument as was done for other architectures in commit 784e0300fe9f ("rseq: Avoid infinite recursion when delivering SIGSEGV"). Signed-off-by: Paul Burton Acked-by: Mathieu Desnoyers Patchwork: https://patchwork.linux-mips.org/patch/19603/ Cc: James Hogan Cc: Ralf Baechle Cc: Peter Zijlstra Cc: Paul E. McKenney Cc: Boqun Feng Cc: Will Deacon Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org --- arch/mips/kernel/signal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 00f2535d2226..0a9cfe7a0372 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -801,7 +801,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) regs->regs[0] = 0; /* Don't deal with this again. */ } - rseq_signal_deliver(regs); + rseq_signal_deliver(ksig, regs); if (sig_uses_siginfo(&ksig->ka, abi)) ret = abi->setup_rt_frame(vdso + abi->vdso->off_rt_sigreturn, @@ -870,7 +870,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused, if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); - rseq_handle_notify_resume(regs); + rseq_handle_notify_resume(NULL, regs); } user_enter(); -- cgit v1.2.3 From 10ee25268e1f8475905e1deb85bb83627dca561e Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 21 Jun 2018 23:26:55 -0700 Subject: xfs: allow empty transactions while frozen In commit e89c041338ed6ef ("xfs: implement the GETFSMAP ioctl") we created the ability to obtain empty transactions. These transactions have no log or block reservations and therefore can't modify anything. Since they're also NO_WRITECOUNT they can run while the fs is frozen, so we don't need to WARN_ON about that usage. Signed-off-by: Darrick J. Wong Reviewed-by: Allison Henderson Reviewed-by: Christoph Hellwig --- fs/xfs/xfs_trans.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c index e040af120b69..524f543c5b82 100644 --- a/fs/xfs/xfs_trans.c +++ b/fs/xfs/xfs_trans.c @@ -258,7 +258,12 @@ xfs_trans_alloc( if (!(flags & XFS_TRANS_NO_WRITECOUNT)) sb_start_intwrite(mp->m_super); - WARN_ON(mp->m_super->s_writers.frozen == SB_FREEZE_COMPLETE); + /* + * Zero-reservation ("empty") transactions can't modify anything, so + * they're allowed to run while we're frozen. + */ + WARN_ON(resp->tr_logres > 0 && + mp->m_super->s_writers.frozen == SB_FREEZE_COMPLETE); atomic_inc(&mp->m_active_trans); tp = kmem_zone_zalloc(xfs_trans_zone, -- cgit v1.2.3 From aafe12cee0b132824f5187987f8a3fb704b9f685 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 21 Jun 2018 23:26:56 -0700 Subject: xfs: don't trip over negative free space in xfs_reserve_blocks If we somehow end up with a filesystem that has fewer free blocks than the blocks set aside to avoid ENOSPC deadlocks, it's possible that the free space calculation in xfs_reserve_blocks will spit out a negative number (because percpu_counter_sum returns s64). We fail to notice this negative number and set fdblks_delta to it. Now we increment fdblocks(!) and the unsigned type of m_resblks means that we end up setting a ridiculously huge m_resblks reservation. Avoid this comedy of errors by detecting the negative free space and returning -ENOSPC. Signed-off-by: Darrick J. Wong Reviewed-by: Allison Henderson Reviewed-by: Christoph Hellwig --- fs/xfs/xfs_fsops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c index a7afcad6b711..3f2bd6032cf8 100644 --- a/fs/xfs/xfs_fsops.c +++ b/fs/xfs/xfs_fsops.c @@ -387,7 +387,7 @@ xfs_reserve_blocks( do { free = percpu_counter_sum(&mp->m_fdblocks) - mp->m_alloc_set_aside; - if (!free) + if (free <= 0) break; delta = request - mp->m_resblks; -- cgit v1.2.3 From f62cb48e43195f66c7a40bbfcf11531fc1ff8999 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 21 Jun 2018 23:26:57 -0700 Subject: xfs: don't allow insert-range to shift extents past the maximum offset Zorro Lang reports that generic/485 blows an assert on a filesystem with 512 byte blocks. The test tries to fallocate a post-eof extent at the maximum file size and calls insert range to shift the extents right by two blocks. On a 512b block filesystem this causes startoff to overflow the 54-bit startoff field, leading to the assert. Therefore, always check the rightmost extent to see if it would overflow prior to invoking the insert range machinery. Reported-by: zlang@redhat.com Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200137 Signed-off-by: Darrick J. Wong Reviewed-by: Allison Henderson Reviewed-by: Christoph Hellwig --- fs/xfs/libxfs/xfs_bmap.c | 26 ++++++++++++++++++++++++++ fs/xfs/libxfs/xfs_bmap.h | 2 ++ fs/xfs/libxfs/xfs_format.h | 2 ++ fs/xfs/xfs_bmap_util.c | 4 ++++ 4 files changed, 34 insertions(+) diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c index 01628f0c9a0c..7205268b30bc 100644 --- a/fs/xfs/libxfs/xfs_bmap.c +++ b/fs/xfs/libxfs/xfs_bmap.c @@ -5780,6 +5780,32 @@ del_cursor: return error; } +/* Make sure we won't be right-shifting an extent past the maximum bound. */ +int +xfs_bmap_can_insert_extents( + struct xfs_inode *ip, + xfs_fileoff_t off, + xfs_fileoff_t shift) +{ + struct xfs_bmbt_irec got; + int is_empty; + int error = 0; + + ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL)); + + if (XFS_FORCED_SHUTDOWN(ip->i_mount)) + return -EIO; + + xfs_ilock(ip, XFS_ILOCK_EXCL); + error = xfs_bmap_last_extent(NULL, ip, XFS_DATA_FORK, &got, &is_empty); + if (!error && !is_empty && got.br_startoff >= off && + ((got.br_startoff + shift) & BMBT_STARTOFF_MASK) < got.br_startoff) + error = -EINVAL; + xfs_iunlock(ip, XFS_ILOCK_EXCL); + + return error; +} + int xfs_bmap_insert_extents( struct xfs_trans *tp, diff --git a/fs/xfs/libxfs/xfs_bmap.h b/fs/xfs/libxfs/xfs_bmap.h index 99dddbd0fcc6..9b49ddf99c41 100644 --- a/fs/xfs/libxfs/xfs_bmap.h +++ b/fs/xfs/libxfs/xfs_bmap.h @@ -227,6 +227,8 @@ int xfs_bmap_collapse_extents(struct xfs_trans *tp, struct xfs_inode *ip, xfs_fileoff_t *next_fsb, xfs_fileoff_t offset_shift_fsb, bool *done, xfs_fsblock_t *firstblock, struct xfs_defer_ops *dfops); +int xfs_bmap_can_insert_extents(struct xfs_inode *ip, xfs_fileoff_t off, + xfs_fileoff_t shift); int xfs_bmap_insert_extents(struct xfs_trans *tp, struct xfs_inode *ip, xfs_fileoff_t *next_fsb, xfs_fileoff_t offset_shift_fsb, bool *done, xfs_fileoff_t stop_fsb, xfs_fsblock_t *firstblock, diff --git a/fs/xfs/libxfs/xfs_format.h b/fs/xfs/libxfs/xfs_format.h index 7b4a43deb83e..059bc44c27e8 100644 --- a/fs/xfs/libxfs/xfs_format.h +++ b/fs/xfs/libxfs/xfs_format.h @@ -1529,6 +1529,8 @@ typedef struct xfs_bmdr_block { #define BMBT_STARTBLOCK_BITLEN 52 #define BMBT_BLOCKCOUNT_BITLEN 21 +#define BMBT_STARTOFF_MASK ((1ULL << BMBT_STARTOFF_BITLEN) - 1) + typedef struct xfs_bmbt_rec { __be64 l0, l1; } xfs_bmbt_rec_t; diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c index c195b9d857af..bb417156e3bf 100644 --- a/fs/xfs/xfs_bmap_util.c +++ b/fs/xfs/xfs_bmap_util.c @@ -1383,6 +1383,10 @@ xfs_insert_file_space( trace_xfs_insert_file_space(ip); + error = xfs_bmap_can_insert_extents(ip, stop_fsb, shift_fsb); + if (error) + return error; + error = xfs_prepare_shift(ip, offset); if (error) return error; -- cgit v1.2.3 From 5bd88d153998c1b189fdeb8b8bd4cce36b5acf62 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 21 Jun 2018 23:26:57 -0700 Subject: xfs: recheck reflink state after grabbing ILOCK_SHARED for a write The reflink iflag could have changed since the earlier unlocked check, so if we got ILOCK_SHARED for a write and but we're now a reflink inode we have to switch to ILOCK_EXCL and relock. This helps us avoid blowing lock assertions in things like generic/166: XFS: Assertion failed: xfs_isilocked(ip, XFS_ILOCK_EXCL), file: fs/xfs/xfs_reflink.c, line: 383 WARNING: CPU: 1 PID: 24707 at fs/xfs/xfs_message.c:104 assfail+0x25/0x30 [xfs] Modules linked in: deadline_iosched dm_snapshot dm_bufio ext4 mbcache jbd2 dm_flakey xfs libcrc32c dax_pmem device_dax nd_pmem sch_fq_codel af_packet [last unloaded: scsi_debug] CPU: 1 PID: 24707 Comm: xfs_io Not tainted 4.18.0-rc1-djw #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:assfail+0x25/0x30 [xfs] Code: ff 0f 0b c3 90 66 66 66 66 90 48 89 f1 41 89 d0 48 c7 c6 e8 ef 1b a0 48 89 fa 31 ff e8 54 f9 ff ff 80 3d fd ba 0f 00 00 75 03 <0f> 0b c3 0f 0b 66 0f 1f 44 00 00 66 66 66 66 90 48 63 f6 49 89 f9 RSP: 0018:ffffc90006423ad8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880030b65e80 RCX: 0000000000000000 RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffffa01b0447 RBP: ffffc90006423c10 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88003d43fc30 R11: f000000000000000 R12: ffff880077cda000 R13: 0000000000000000 R14: ffffc90006423c30 R15: ffffc90006423bf9 FS: 00007feba8986800(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000138ab58 CR3: 000000003d40a000 CR4: 00000000000006a0 Call Trace: xfs_reflink_allocate_cow+0x24c/0x3d0 [xfs] xfs_file_iomap_begin+0x6d2/0xeb0 [xfs] ? iomap_to_fiemap+0x80/0x80 iomap_apply+0x5e/0x130 iomap_dio_rw+0x2e0/0x400 ? iomap_to_fiemap+0x80/0x80 ? xfs_file_dio_aio_write+0x133/0x4a0 [xfs] xfs_file_dio_aio_write+0x133/0x4a0 [xfs] xfs_file_write_iter+0x7b/0xb0 [xfs] __vfs_write+0x16f/0x1f0 vfs_write+0xc8/0x1c0 ksys_pwrite64+0x74/0x90 do_syscall_64+0x56/0x180 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig --- fs/xfs/xfs_iomap.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 49f5492eed3b..55876dd02f0c 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -963,12 +963,13 @@ xfs_ilock_for_iomap( unsigned *lockmode) { unsigned mode = XFS_ILOCK_SHARED; + bool is_write = flags & (IOMAP_WRITE | IOMAP_ZERO); /* * COW writes may allocate delalloc space or convert unwritten COW * extents, so we need to make sure to take the lock exclusively here. */ - if (xfs_is_reflink_inode(ip) && (flags & (IOMAP_WRITE | IOMAP_ZERO))) { + if (xfs_is_reflink_inode(ip) && is_write) { /* * FIXME: It could still overwrite on unshared extents and not * need allocation. @@ -989,6 +990,7 @@ xfs_ilock_for_iomap( mode = XFS_ILOCK_EXCL; } +relock: if (flags & IOMAP_NOWAIT) { if (!xfs_ilock_nowait(ip, mode)) return -EAGAIN; @@ -996,6 +998,17 @@ xfs_ilock_for_iomap( xfs_ilock(ip, mode); } + /* + * The reflink iflag could have changed since the earlier unlocked + * check, so if we got ILOCK_SHARED for a write and but we're now a + * reflink inode we have to switch to ILOCK_EXCL and relock. + */ + if (mode == XFS_ILOCK_SHARED && is_write && xfs_is_reflink_inode(ip)) { + xfs_iunlock(ip, mode); + mode = XFS_ILOCK_EXCL; + goto relock; + } + *lockmode = mode; return 0; } -- cgit v1.2.3 From 232d0a24b0fc197c50e95fe65f236027b5fa1b74 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 21 Jun 2018 23:26:57 -0700 Subject: xfs: fix uninitialized field in rtbitmap fsmap backend Initialize the extent count field of the high key so that when we use the high key to synthesize an 'unknown owner' record (i.e. used space record) at the end of the queried range we have a field with which to compute rm_blockcount. This is not strictly necessary because the synthesizer never uses the rm_blockcount field, but we can shut up the static code analysis anyway. Coverity-id: 1437358 Signed-off-by: Darrick J. Wong Reviewed-by: Allison Henderson Reviewed-by: Christoph Hellwig --- fs/xfs/xfs_fsmap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_fsmap.c b/fs/xfs/xfs_fsmap.c index c34fa9c342f2..c7157bc48bd1 100644 --- a/fs/xfs/xfs_fsmap.c +++ b/fs/xfs/xfs_fsmap.c @@ -513,8 +513,8 @@ xfs_getfsmap_rtdev_rtbitmap_query( struct xfs_trans *tp, struct xfs_getfsmap_info *info) { - struct xfs_rtalloc_rec alow; - struct xfs_rtalloc_rec ahigh; + struct xfs_rtalloc_rec alow = { 0 }; + struct xfs_rtalloc_rec ahigh = { 0 }; int error; xfs_ilock(tp->t_mountp->m_rbmip, XFS_ILOCK_SHARED); -- cgit v1.2.3 From a3a374bf1889b1b401b25e6aada3ca4151a99d15 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 21 Jun 2018 23:26:58 -0700 Subject: xfs: fix off-by-one error in xfs_rtalloc_query_range In commit 8ad560d2565e6 ("xfs: strengthen rtalloc query range checks") we strengthened the input parameter checks in the rtbitmap range query function, but introduced an off-by-one error in the process. The call to xfs_rtfind_forw deals with the high key being rextents, but we clamp the high key to rextents - 1. This causes the returned results to stop one block short of the end of the rtdev, which is incorrect. Signed-off-by: Darrick J. Wong Reviewed-by: Allison Henderson Reviewed-by: Christoph Hellwig --- fs/xfs/libxfs/xfs_rtbitmap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/libxfs/xfs_rtbitmap.c b/fs/xfs/libxfs/xfs_rtbitmap.c index 65fc4ed2e9a1..b228c821bae6 100644 --- a/fs/xfs/libxfs/xfs_rtbitmap.c +++ b/fs/xfs/libxfs/xfs_rtbitmap.c @@ -1029,8 +1029,8 @@ xfs_rtalloc_query_range( if (low_rec->ar_startext >= mp->m_sb.sb_rextents || low_rec->ar_startext == high_rec->ar_startext) return 0; - if (high_rec->ar_startext >= mp->m_sb.sb_rextents) - high_rec->ar_startext = mp->m_sb.sb_rextents - 1; + if (high_rec->ar_startext > mp->m_sb.sb_rextents) + high_rec->ar_startext = mp->m_sb.sb_rextents; /* Iterate the bitmap, looking for discrepancies. */ rtstart = low_rec->ar_startext; -- cgit v1.2.3 From e53c4b598372001a13901b77649dc1b4afec3e85 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 21 Jun 2018 23:26:58 -0700 Subject: xfs: ensure post-EOF zeroing happens after zeroing part of a file If a user asks us to zero_range part of a file, the end of the range is EOF, and not aligned to a page boundary, invoke writeback of the EOF page to ensure that the post-EOF part of the page is zeroed. This ensures that we don't expose stale memory contents via mmap, if in a clumsy manner. Found by running generic/127 when it runs zero_range and mapread at EOF one after the other. Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Reviewed-by: Allison Henderson --- fs/xfs/xfs_bmap_util.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c index bb417156e3bf..83b1e8c6c18f 100644 --- a/fs/xfs/xfs_bmap_util.c +++ b/fs/xfs/xfs_bmap_util.c @@ -1187,7 +1187,22 @@ xfs_free_file_space( return 0; if (offset + len > XFS_ISIZE(ip)) len = XFS_ISIZE(ip) - offset; - return iomap_zero_range(VFS_I(ip), offset, len, NULL, &xfs_iomap_ops); + error = iomap_zero_range(VFS_I(ip), offset, len, NULL, &xfs_iomap_ops); + if (error) + return error; + + /* + * If we zeroed right up to EOF and EOF straddles a page boundary we + * must make sure that the post-EOF area is also zeroed because the + * page could be mmap'd and iomap_zero_range doesn't do that for us. + * Writeback of the eof page will do this, albeit clumsily. + */ + if (offset + len >= XFS_ISIZE(ip) && ((offset + len) & PAGE_MASK)) { + error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping, + (offset + len) & ~PAGE_MASK, LLONG_MAX); + } + + return error; } /* -- cgit v1.2.3 From d8cb5e42378918e00eda58792f3ab86dd1e7d214 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 21 Jun 2018 23:26:56 -0700 Subject: xfs: fix fdblocks accounting w/ RMAPBT per-AG reservation In __xfs_ag_resv_init we incorrectly calculate the amount by which to decrease fdblocks when reserving blocks for the rmapbt. Because rmapbt allocations do not decrease fdblocks, we must decrease fdblocks by the entire size of the requested reservation in order to achieve our goal of always having enough free blocks to satisfy an rmapbt expansion. This is in contrast to the refcountbt/finobt, which /do/ subtract from fdblocks whenever they allocate a block. For this allocation type we preserve the existing behavior where we decrease fdblocks only by the requested reservation minus the size of the existing tree. This fixes the problem where the available block counts reported by statfs change across a remount if there had been an rmapbt size change since mount time. Signed-off-by: Darrick J. Wong Reviewed-by: Allison Henderson --- fs/xfs/libxfs/xfs_ag_resv.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/fs/xfs/libxfs/xfs_ag_resv.c b/fs/xfs/libxfs/xfs_ag_resv.c index 84db76e0e3e3..fecd187fcf2c 100644 --- a/fs/xfs/libxfs/xfs_ag_resv.c +++ b/fs/xfs/libxfs/xfs_ag_resv.c @@ -157,6 +157,7 @@ __xfs_ag_resv_free( error = xfs_mod_fdblocks(pag->pag_mount, oldresv, true); resv->ar_reserved = 0; resv->ar_asked = 0; + resv->ar_orig_reserved = 0; if (error) trace_xfs_ag_resv_free_error(pag->pag_mount, pag->pag_agno, @@ -189,13 +190,34 @@ __xfs_ag_resv_init( struct xfs_mount *mp = pag->pag_mount; struct xfs_ag_resv *resv; int error; - xfs_extlen_t reserved; + xfs_extlen_t hidden_space; if (used > ask) ask = used; - reserved = ask - used; - error = xfs_mod_fdblocks(mp, -(int64_t)reserved, true); + switch (type) { + case XFS_AG_RESV_RMAPBT: + /* + * Space taken by the rmapbt is not subtracted from fdblocks + * because the rmapbt lives in the free space. Here we must + * subtract the entire reservation from fdblocks so that we + * always have blocks available for rmapbt expansion. + */ + hidden_space = ask; + break; + case XFS_AG_RESV_METADATA: + /* + * Space taken by all other metadata btrees are accounted + * on-disk as used space. We therefore only hide the space + * that is reserved but not used by the trees. + */ + hidden_space = ask - used; + break; + default: + ASSERT(0); + return -EINVAL; + } + error = xfs_mod_fdblocks(mp, -(int64_t)hidden_space, true); if (error) { trace_xfs_ag_resv_init_error(pag->pag_mount, pag->pag_agno, error, _RET_IP_); @@ -216,7 +238,8 @@ __xfs_ag_resv_init( resv = xfs_perag_resv(pag, type); resv->ar_asked = ask; - resv->ar_reserved = resv->ar_orig_reserved = reserved; + resv->ar_orig_reserved = hidden_space; + resv->ar_reserved = ask - used; trace_xfs_ag_resv_init(pag, type, ask); return 0; -- cgit v1.2.3 From 1dd2058f902eb2d8bd5bedab0b190a21d5245e71 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 21 Jun 2018 11:06:41 +0300 Subject: cpufreq: qcom-kryo: Fix error handling in probe() We should return if get_cpu_device() fails or it leads to a NULL dereference. Also dev_pm_opp_of_get_opp_desc_node() returns NULL on error, it never returns error pointers. Fixes: 46e2856b8e18 (cpufreq: Add Kryo CPU scaling driver) Signed-off-by: Dan Carpenter Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/qcom-cpufreq-kryo.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/cpufreq/qcom-cpufreq-kryo.c b/drivers/cpufreq/qcom-cpufreq-kryo.c index 01bddacf5c3b..29389accf3e9 100644 --- a/drivers/cpufreq/qcom-cpufreq-kryo.c +++ b/drivers/cpufreq/qcom-cpufreq-kryo.c @@ -87,8 +87,8 @@ static int qcom_cpufreq_kryo_probe(struct platform_device *pdev) int ret; cpu_dev = get_cpu_device(0); - if (NULL == cpu_dev) - ret = -ENODEV; + if (!cpu_dev) + return -ENODEV; msm8996_version = qcom_cpufreq_kryo_get_msm_id(); if (NUM_OF_MSM8996_VERSIONS == msm8996_version) { @@ -97,8 +97,8 @@ static int qcom_cpufreq_kryo_probe(struct platform_device *pdev) } np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); - if (IS_ERR(np)) - return PTR_ERR(np); + if (!np) + return -ENOENT; ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu"); if (!ret) { -- cgit v1.2.3 From 2068db53b6337f8c6c7bcd07dea0b5e82b1a1a02 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Wed, 20 Jun 2018 07:19:01 -0500 Subject: ipmi: Cleanup oops on initialization failure Commit 93c303d2045b3 "ipmi_si: Clean up shutdown a bit" didn't copy the behavior of the cleanup in one spot, it needed to check for a non-NULL interface before cleaning it up. Reported-by: Meelis Roos Signed-off-by: Corey Minyard Tested-by: Meelis Roos --- drivers/char/ipmi/ipmi_si_intf.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index ad353be871bf..90ec010bffbd 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2088,8 +2088,10 @@ static int try_smi_init(struct smi_info *new_smi) return 0; out_err: - ipmi_unregister_smi(new_smi->intf); - new_smi->intf = NULL; + if (new_smi->intf) { + ipmi_unregister_smi(new_smi->intf); + new_smi->intf = NULL; + } kfree(init_name); -- cgit v1.2.3 From dc0f0a026d33819bb82d5c26ab2fca838e2004be Mon Sep 17 00:00:00 2001 From: Haiyue Wang Date: Sat, 23 Jun 2018 21:51:13 +0800 Subject: ipmi: kcs_bmc: fix IRQ exception if the channel is not open When kcs_bmc_handle_event calls kcs_force_abort function to handle the not open (no user running) KCS channel transaction, the returned status value -ENODEV causes the low level IRQ handler indicating that the irq was not for him by returning IRQ_NONE. After some time, this IRQ will be treated to be spurious one, and the exception dump happens. irq 30: nobody cared (try booting with the "irqpoll" option) CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.15-npcm750 #1 Hardware name: NPCMX50 Chip family [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [] (show_stack) from [] (dump_stack+0x8c/0xa0) [] (dump_stack) from [] (__report_bad_irq+0x3c/0xdc) [] (__report_bad_irq) from [] (note_interrupt+0x29c/0x2ec) [] (note_interrupt) from [] (handle_irq_event_percpu+0x5c/0x68) [] (handle_irq_event_percpu) from [] (handle_irq_event+0x48/0x6c) [] (handle_irq_event) from [] (handle_fasteoi_irq+0xc8/0x198) [] (handle_fasteoi_irq) from [] (__handle_domain_irq+0x90/0xe8) [] (__handle_domain_irq) from [] (gic_handle_irq+0x58/0x9c) [] (gic_handle_irq) from [] (__irq_svc+0x6c/0x90) Exception stack(0xc0a01de8 to 0xc0a01e30) 1de0: 00002080 c0a6fbc0 00000000 00000000 00000000 c096d294 1e00: 00000000 00000001 dc406400 f03ff100 00000082 c0a01e94 c0a6fbc0 c0a01e38 1e20: 00200102 c01015bc 60000113 ffffffff [] (__irq_svc) from [] (__do_softirq+0xbc/0x358) [] (__do_softirq) from [] (irq_exit+0xb8/0xec) [] (irq_exit) from [] (__handle_domain_irq+0x94/0xe8) [] (__handle_domain_irq) from [] (gic_handle_irq+0x58/0x9c) [] (gic_handle_irq) from [] (__irq_svc+0x6c/0x90) Exception stack(0xc0a01ef8 to 0xc0a01f40) 1ee0: 00000000 000003ae 1f00: dcc0f338 c0111060 c0a00000 c0a0cc44 c0a0cbe4 c0a1c22b c07bc218 00000001 1f20: dcffca40 c0a01f54 c0a01f58 c0a01f48 c0103524 c0103528 60000013 ffffffff [] (__irq_svc) from [] (arch_cpu_idle+0x48/0x4c) [] (arch_cpu_idle) from [] (default_idle_call+0x30/0x3c) [] (default_idle_call) from [] (do_idle+0xc8/0x134) [] (do_idle) from [] (cpu_startup_entry+0x28/0x2c) [] (cpu_startup_entry) from [] (rest_init+0x84/0x88) [] (rest_init) from [] (start_kernel+0x388/0x394) [] (start_kernel) from [<0000807c>] (0x807c) handlers: [] npcm7xx_kcs_irq Disabling IRQ #30 It needs to change the returned status from -ENODEV to 0. The -ENODEV was originally used to tell the low level IRQ handler that no user was running, but not consider the IRQ handling desgin. And multiple KCS channels share one IRQ handler, it needs to check the IBF flag before doing force abort. If the IBF is set, after handling, return 0 to low level IRQ handler to indicate that the IRQ is handled. Signed-off-by: Haiyue Wang Signed-off-by: Corey Minyard --- drivers/char/ipmi/kcs_bmc.c | 31 ++++++++++--------------------- 1 file changed, 10 insertions(+), 21 deletions(-) diff --git a/drivers/char/ipmi/kcs_bmc.c b/drivers/char/ipmi/kcs_bmc.c index fbfc05e3f3d1..bb882ab161fe 100644 --- a/drivers/char/ipmi/kcs_bmc.c +++ b/drivers/char/ipmi/kcs_bmc.c @@ -210,34 +210,23 @@ static void kcs_bmc_handle_cmd(struct kcs_bmc *kcs_bmc) int kcs_bmc_handle_event(struct kcs_bmc *kcs_bmc) { unsigned long flags; - int ret = 0; + int ret = -ENODATA; u8 status; spin_lock_irqsave(&kcs_bmc->lock, flags); - if (!kcs_bmc->running) { - kcs_force_abort(kcs_bmc); - ret = -ENODEV; - goto out_unlock; - } - - status = read_status(kcs_bmc) & (KCS_STATUS_IBF | KCS_STATUS_CMD_DAT); - - switch (status) { - case KCS_STATUS_IBF | KCS_STATUS_CMD_DAT: - kcs_bmc_handle_cmd(kcs_bmc); - break; - - case KCS_STATUS_IBF: - kcs_bmc_handle_data(kcs_bmc); - break; + status = read_status(kcs_bmc); + if (status & KCS_STATUS_IBF) { + if (!kcs_bmc->running) + kcs_force_abort(kcs_bmc); + else if (status & KCS_STATUS_CMD_DAT) + kcs_bmc_handle_cmd(kcs_bmc); + else + kcs_bmc_handle_data(kcs_bmc); - default: - ret = -ENODATA; - break; + ret = 0; } -out_unlock: spin_unlock_irqrestore(&kcs_bmc->lock, flags); return ret; -- cgit v1.2.3 From 49a6ec5b807ea4ad7ebe1f58080ebb8497cb2d2c Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sun, 17 Jun 2018 13:53:09 +0200 Subject: ARM: dts: am437x: make edt-ft5x06 a wakeup source The touchscreen driver no longer configures the device as wakeup source by default. A "wakeup-source" property is needed. Signed-off-by: Daniel Mack Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-sk-evm.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 440351ad0b80..d4be3fd0b6f4 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -610,6 +610,8 @@ touchscreen-size-x = <480>; touchscreen-size-y = <272>; + + wakeup-source; }; tlv320aic3106: tlv320aic3106@1b { -- cgit v1.2.3 From 5e03aa61a7f3cb99852bc3ad6925f5fa3c0dcc93 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 14 Jun 2018 10:53:34 +0530 Subject: PM / Domains: Fix return value of of_genpd_opp_to_performance_state() of_genpd_opp_to_performance_state() should return 0 for errors, but the dummy routine isn't doing that. Fix it. Signed-off-by: Viresh Kumar Acked-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki --- include/linux/pm_domain.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 9206a4fef9ac..139f79c8477a 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -276,7 +276,7 @@ static inline unsigned int of_genpd_opp_to_performance_state(struct device *dev, struct device_node *opp_node) { - return -ENODEV; + return 0; } static inline int genpd_dev_pm_attach(struct device *dev) -- cgit v1.2.3 From ad6384ba3ac98ad524194e37de379c1fe503870b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 20 Jun 2018 11:45:37 +0530 Subject: PM / Domains: Rename opp_node to np The DT node passed here isn't necessarily an OPP node, as this routine can also be used for cases where the "required-opps" property is present directly in the device's node. Rename it. This also removes a stale comment. Acked-by: Ulf Hansson Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/domain.c | 7 +++---- include/linux/pm_domain.h | 4 ++-- 2 files changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 4925af5c4cf0..c298de8a8308 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -2487,10 +2487,9 @@ EXPORT_SYMBOL_GPL(of_genpd_parse_idle_states); * power domain corresponding to a DT node's "required-opps" property. * * @dev: Device for which the performance-state needs to be found. - * @opp_node: DT node where the "required-opps" property is present. This can be + * @np: DT node where the "required-opps" property is present. This can be * the device node itself (if it doesn't have an OPP table) or a node * within the OPP table of a device (if device has an OPP table). - * @state: Pointer to return performance state. * * Returns performance state corresponding to the "required-opps" property of * a DT node. This calls platform specific genpd->opp_to_performance_state() @@ -2499,7 +2498,7 @@ EXPORT_SYMBOL_GPL(of_genpd_parse_idle_states); * Returns performance state on success and 0 on failure. */ unsigned int of_genpd_opp_to_performance_state(struct device *dev, - struct device_node *opp_node) + struct device_node *np) { struct generic_pm_domain *genpd; struct dev_pm_opp *opp; @@ -2514,7 +2513,7 @@ unsigned int of_genpd_opp_to_performance_state(struct device *dev, genpd_lock(genpd); - opp = of_dev_pm_opp_find_required_opp(&genpd->dev, opp_node); + opp = of_dev_pm_opp_find_required_opp(&genpd->dev, np); if (IS_ERR(opp)) { dev_err(dev, "Failed to find required OPP: %ld\n", PTR_ERR(opp)); diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 139f79c8477a..cb8d84090cfb 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -234,7 +234,7 @@ struct generic_pm_domain *of_genpd_remove_last(struct device_node *np); int of_genpd_parse_idle_states(struct device_node *dn, struct genpd_power_state **states, int *n); unsigned int of_genpd_opp_to_performance_state(struct device *dev, - struct device_node *opp_node); + struct device_node *np); int genpd_dev_pm_attach(struct device *dev); struct device *genpd_dev_pm_attach_by_id(struct device *dev, @@ -274,7 +274,7 @@ static inline int of_genpd_parse_idle_states(struct device_node *dn, static inline unsigned int of_genpd_opp_to_performance_state(struct device *dev, - struct device_node *opp_node) + struct device_node *np) { return 0; } -- cgit v1.2.3 From e41fc8c5bd41b96bfae5ce4c66bee6edabc932e8 Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Mon, 25 Jun 2018 14:40:56 +0800 Subject: ALSA: hda/realtek - Fix the problem of two front mics on more machines We have 3 more Lenovo machines, they all have 2 front mics on them, so they need the fixup to change the location for one of two mics. Among these 3 Lenovo machines, one of them has the same pin cfg as the machine with subid 0x17aa3138, so use the pin cfg table to apply fixup for them. The rest machines don't share the same pin cfg, so far use the subid to apply fixup for them. Fixes: a3dafb2200bf ("ALSA: hda/realtek - adjust the location of one mic") Cc: Signed-off-by: Hui Wang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 70bf4c30548a..5ad6c7e5f92e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6610,8 +6610,9 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x30bb, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY), SND_PCI_QUIRK(0x17aa, 0x30e2, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY), SND_PCI_QUIRK(0x17aa, 0x310c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), + SND_PCI_QUIRK(0x17aa, 0x312a, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), SND_PCI_QUIRK(0x17aa, 0x312f, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), - SND_PCI_QUIRK(0x17aa, 0x3138, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), + SND_PCI_QUIRK(0x17aa, 0x3136, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), SND_PCI_QUIRK(0x17aa, 0x313c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI), SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC), @@ -6789,6 +6790,12 @@ static const struct snd_hda_pin_quirk alc269_pin_fixup_tbl[] = { {0x14, 0x90170110}, {0x19, 0x02a11030}, {0x21, 0x02211020}), + SND_HDA_PIN_QUIRK(0x10ec0235, 0x17aa, "Lenovo", ALC294_FIXUP_LENOVO_MIC_LOCATION, + {0x14, 0x90170110}, + {0x19, 0x02a11030}, + {0x1a, 0x02a11040}, + {0x1b, 0x01014020}, + {0x21, 0x0221101f}), SND_HDA_PIN_QUIRK(0x10ec0236, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, {0x12, 0x90a60140}, {0x14, 0x90170110}, -- cgit v1.2.3 From 891f6a726cacbb87e5b06076693ffab53bd378d7 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 21 Jun 2018 14:49:38 +0200 Subject: s390: Correct register corruption in critical section cleanup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In the critical section cleanup we must not mess with r1. For march=z9 or older, larl + ex (instead of exrl) are used with r1 as a temporary register. This can clobber r1 in several interrupt handlers. Fix this by using r11 as a temp register. r11 is being saved by all callers of cleanup_critical. Fixes: 6dd85fbb87 ("s390: move expoline assembler macros to a header") Cc: stable@vger.kernel.org #v4.16 Reported-by: Oliver Kurz Reported-by: Petr Tesařík Signed-off-by: Christian Borntraeger Reviewed-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/entry.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index f03402efab4b..3891805bfcdd 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -1265,7 +1265,7 @@ cleanup_critical: jl 0f clg %r9,BASED(.Lcleanup_table+104) # .Lload_fpu_regs_end jl .Lcleanup_load_fpu_regs -0: BR_EX %r14 +0: BR_EX %r14,%r11 .align 8 .Lcleanup_table: @@ -1301,7 +1301,7 @@ cleanup_critical: ni __SIE_PROG0C+3(%r9),0xfe # no longer in SIE lctlg %c1,%c1,__LC_USER_ASCE # load primary asce larl %r9,sie_exit # skip forward to sie_exit - BR_EX %r14 + BR_EX %r14,%r11 #endif .Lcleanup_system_call: -- cgit v1.2.3 From b41f794f284966fd6ec634111e3b40d241389f96 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 25 Jun 2018 11:09:11 +0200 Subject: ALSA: timer: Fix UBSAN warning at SNDRV_TIMER_IOCTL_NEXT_DEVICE ioctl The kernel may spew a WARNING about UBSAN undefined behavior at handling ALSA timer ioctl SNDRV_TIMER_IOCTL_NEXT_DEVICE: UBSAN: Undefined behaviour in sound/core/timer.c:1524:19 signed integer overflow: 2147483647 + 1 cannot be represented in type 'int' Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x122/0x1c8 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x86 lib/ubsan.c:159 handle_overflow+0x1c2/0x21f lib/ubsan.c:190 __ubsan_handle_add_overflow+0x2a/0x31 lib/ubsan.c:198 snd_timer_user_next_device sound/core/timer.c:1524 [inline] __snd_timer_user_ioctl+0x204d/0x2520 sound/core/timer.c:1939 snd_timer_user_ioctl+0x67/0x95 sound/core/timer.c:1994 .... It happens only when a value with INT_MAX is passed, as we're incrementing it unconditionally. So the fix is trivial, check the value with INT_MAX. Although the bug itself is fairly harmless, it's better to fix it so that fuzzers won't hit this again later. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200213 Reported-and-tested-by: Team OWL337 Cc: Signed-off-by: Takashi Iwai --- sound/core/timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/core/timer.c b/sound/core/timer.c index 665089c45560..b6f076bbc72d 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -1520,7 +1520,7 @@ static int snd_timer_user_next_device(struct snd_timer_id __user *_tid) } else { if (id.subdevice < 0) id.subdevice = 0; - else + else if (id.subdevice < INT_MAX) id.subdevice++; } } -- cgit v1.2.3 From c9a4c63888dbb79ce4d068ca1dd8b05bc3f156b1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 25 Jun 2018 11:13:59 +0200 Subject: ALSA: seq: Fix UBSAN warning at SNDRV_SEQ_IOCTL_QUERY_NEXT_CLIENT ioctl The kernel may spew a WARNING with UBSAN undefined behavior at handling ALSA sequencer ioctl SNDRV_SEQ_IOCTL_QUERY_NEXT_CLIENT: UBSAN: Undefined behaviour in sound/core/seq/seq_clientmgr.c:2007:14 signed integer overflow: 2147483647 + 1 cannot be represented in type 'int' Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x122/0x1c8 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x86 lib/ubsan.c:159 handle_overflow+0x1c2/0x21f lib/ubsan.c:190 __ubsan_handle_add_overflow+0x2a/0x31 lib/ubsan.c:198 snd_seq_ioctl_query_next_client+0x1ac/0x1d0 sound/core/seq/seq_clientmgr.c:2007 snd_seq_ioctl+0x264/0x3d0 sound/core/seq/seq_clientmgr.c:2144 .... It happens only when INT_MAX is passed there, as we're incrementing it unconditionally. So the fix is trivial, check the value with INT_MAX. Although the bug itself is fairly harmless, it's better to fix it so that fuzzers won't hit this again later. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200211 Signed-off-by: Takashi Iwai --- sound/core/seq/seq_clientmgr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/core/seq/seq_clientmgr.c b/sound/core/seq/seq_clientmgr.c index 61a07fe34cd2..56ca78423040 100644 --- a/sound/core/seq/seq_clientmgr.c +++ b/sound/core/seq/seq_clientmgr.c @@ -2004,7 +2004,8 @@ static int snd_seq_ioctl_query_next_client(struct snd_seq_client *client, struct snd_seq_client *cptr = NULL; /* search for next client */ - info->client++; + if (info->client < INT_MAX) + info->client++; if (info->client < 0) info->client = 0; for (; info->client < SNDRV_SEQ_MAX_CLIENTS; info->client++) { -- cgit v1.2.3 From 68d676a089625daed9d61df56ac63b5cd7189efe Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 22 Jun 2018 11:56:56 -0700 Subject: nfp: bpf: don't stop offload if replace failed Stopping offload completely if replace of program failed dates back to days of transparent offload. Back then we wanted to silently fall back to the in-driver processing. Today we mark programs for offload when they are loaded into the kernel, so the transparent offload is no longer a reality. Flags check in the driver will only allow replace of a driver program with another driver program or an offload program with another offload program. When driver program is replaced stopping offload is a no-op, because driver program isn't offloaded. When replacing offloaded program if the offload fails the entire operation will fail all the way back to user space and we should continue using the old program. IOW when replacing a driver program stopping offload is unnecessary and when replacing offloaded program - it's a bug, old program should continue to run. In practice this bug would mean that if offload operation was to fail (either due to FW communication error, kernel OOM or new program being offloaded but for a different netdev) driver would continue reporting that previous XDP program is offloaded but in fact no program will be loaded in hardware. The failure is fairly unlikely (found by inspection, when working on the code) but it's unpleasant. Backport note: even though the bug was introduced in commit cafa92ac2553 ("nfp: bpf: add support for XDP_FLAGS_HW_MODE"), this fix depends on commit 441a33031fe5 ("net: xdp: don't allow device-bound programs in driver mode"), so this fix is sufficient only in v4.15 or newer. Kernels v4.13.x and v4.14.x do need to stop offload if it was transparent/opportunistic, i.e. if XDP_FLAGS_HW_MODE was not set on running program. Fixes: cafa92ac2553 ("nfp: bpf: add support for XDP_FLAGS_HW_MODE") Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Acked-by: Song Liu Signed-off-by: Daniel Borkmann --- drivers/net/ethernet/netronome/nfp/bpf/main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/netronome/nfp/bpf/main.c b/drivers/net/ethernet/netronome/nfp/bpf/main.c index fcdfb8e7fdea..7184af94aa53 100644 --- a/drivers/net/ethernet/netronome/nfp/bpf/main.c +++ b/drivers/net/ethernet/netronome/nfp/bpf/main.c @@ -81,10 +81,10 @@ nfp_bpf_xdp_offload(struct nfp_app *app, struct nfp_net *nn, ret = nfp_net_bpf_offload(nn, prog, running, extack); /* Stop offload if replace not possible */ - if (ret && prog) - nfp_bpf_xdp_offload(app, nn, NULL, extack); + if (ret) + return ret; - nn->dp.bpf_offload_xdp = prog && !ret; + nn->dp.bpf_offload_xdp = !!prog; return ret; } -- cgit v1.2.3 From 043f891b70e6197bc181f3b087c2bd04c60fddd2 Mon Sep 17 00:00:00 2001 From: Petr Mladek Date: Mon, 25 Jun 2018 13:28:06 +0200 Subject: Revert "lib/test_printf.c: call wait_for_random_bytes() before plain %p tests" This reverts commit ee410f15b1418f2f4428e79980674c979081bcb7. It might prevent the machine from boot. It would wait for enough randomness at the very beginning of kernel_init(). But there is basically nothing running in parallel that would help to produce any randomness. Reported-by: Steven Rostedt (VMware) Signed-off-by: Petr Mladek --- lib/test_printf.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/lib/test_printf.c b/lib/test_printf.c index b2aa8f514844..cea592f402ed 100644 --- a/lib/test_printf.c +++ b/lib/test_printf.c @@ -260,13 +260,6 @@ plain(void) { int err; - /* - * Make sure crng is ready. Otherwise we get "(ptrval)" instead - * of a hashed address when printing '%p' in plain_hash() and - * plain_format(). - */ - wait_for_random_bytes(); - err = plain_hash(); if (err) { pr_warn("plain 'p' does not appear to be hashed\n"); -- cgit v1.2.3 From 560b423dd9af4272a1f3685c2d6b073fdc4af7c7 Mon Sep 17 00:00:00 2001 From: Stafford Horne Date: Mon, 18 Jun 2018 06:52:58 +0900 Subject: openrisc: Call destructor during __pte_free_tlb This fixes an issue uncovered when a recent change to add the "page table" flag was merged. During bootup we see many errors like the following: BUG: Bad page state in process mkdir pfn:00bae page:c1ff15c0 count:0 mapcount:-1024 mapping:00000000 index:0x0 flags: 0x0() raw: 00000000 00000000 00000000 fffffbff 00000000 00000100 00000200 00000000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 46 Comm: mkdir Tainted: G B 4.17.0-simple-smp-07461-g1d40a5ea01d5-dirty #993 Call trace: [<(ptrval)>] show_stack+0x44/0x54 [<(ptrval)>] dump_stack+0xb0/0xe8 [<(ptrval)>] bad_page+0x138/0x174 [<(ptrval)>] ? cpumask_next+0x24/0x34 [<(ptrval)>] free_pages_check_bad+0x6c/0xd0 [<(ptrval)>] free_pcppages_bulk+0x174/0x42c [<(ptrval)>] free_unref_page_commit.isra.17+0xb8/0xc8 [<(ptrval)>] free_unref_page_list+0x10c/0x190 [<(ptrval)>] ? set_reset_devices+0x0/0x2c [<(ptrval)>] release_pages+0x3a0/0x414 [<(ptrval)>] tlb_flush_mmu_free+0x5c/0x90 [<(ptrval)>] tlb_flush_mmu+0x90/0xa4 [<(ptrval)>] arch_tlb_finish_mmu+0x50/0x94 [<(ptrval)>] tlb_finish_mmu+0x30/0x64 [<(ptrval)>] exit_mmap+0x110/0x1e0 [<(ptrval)>] mmput+0x50/0xf0 [<(ptrval)>] do_exit+0x274/0xa94 [<(ptrval)>] do_group_exit+0x50/0x110 [<(ptrval)>] __wake_up_parent+0x0/0x38 [<(ptrval)>] _syscall_return+0x0/0x4 During the __pte_free_tlb path openrisc fails to call the page destructor which would clear the new bits that were introduced. To fix this we are calling the destructor. It seem openrisc was the only architecture missing this, all other architectures either call the destructor like we are doing here or use pte_free. Note: failing to call the destructor was also messing up the zone stats (and will be cause other problems if you were using SPLIT_PTE_PTLOCKS, which we are not yet). Fixes: 1d40a5ea01d53 ("mm: mark pages in use for page tables") Acked-by: Matthew Wilcox Signed-off-by: Stafford Horne --- arch/openrisc/include/asm/pgalloc.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/openrisc/include/asm/pgalloc.h b/arch/openrisc/include/asm/pgalloc.h index 3e1a46615120..8999b9226512 100644 --- a/arch/openrisc/include/asm/pgalloc.h +++ b/arch/openrisc/include/asm/pgalloc.h @@ -98,8 +98,12 @@ static inline void pte_free(struct mm_struct *mm, struct page *pte) __free_page(pte); } +#define __pte_free_tlb(tlb, pte, addr) \ +do { \ + pgtable_page_dtor(pte); \ + tlb_remove_page((tlb), (pte)); \ +} while (0) -#define __pte_free_tlb(tlb, pte, addr) tlb_remove_page((tlb), (pte)) #define pmd_pgtable(pmd) pmd_page(pmd) #define check_pgt_cache() do { } while (0) -- cgit v1.2.3 From 229bc19fd7aca4f37964af06e3583c1c8f36b5d6 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 21 Jun 2018 16:19:41 +0300 Subject: xhci: Fix perceived dead host due to runtime suspend race with event handler Don't rely on event interrupt (EINT) bit alone to detect pending port change in resume. If no change event is detected the host may be suspended again, oterwise roothubs are resumed. There is a lag in xHC setting EINT. If we don't notice the pending change in resume, and the controller is runtime suspeded again, it causes the event handler to assume host is dead as it will fail to read xHC registers once PCI puts the controller to D3 state. [ 268.520969] xhci_hcd: xhci_resume: starting port polling. [ 268.520985] xhci_hcd: xhci_hub_status_data: stopping port polling. [ 268.521030] xhci_hcd: xhci_suspend: stopping port polling. [ 268.521040] xhci_hcd: // Setting command ring address to 0x349bd001 [ 268.521139] xhci_hcd: Port Status Change Event for port 3 [ 268.521149] xhci_hcd: resume root hub [ 268.521163] xhci_hcd: port resume event for port 3 [ 268.521168] xhci_hcd: xHC is not running. [ 268.521174] xhci_hcd: handle_port_status: starting port polling. [ 268.596322] xhci_hcd: xhci_hc_died: xHCI host controller not responding, assume dead The EINT lag is described in a additional note in xhci specs 4.19.2: "Due to internal xHC scheduling and system delays, there will be a lag between a change bit being set and the Port Status Change Event that it generated being written to the Event Ring. If SW reads the PORTSC and sees a change bit set, there is no guarantee that the corresponding Port Status Change Event has already been written into the Event Ring." Cc: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 40 +++++++++++++++++++++++++++++++++++++--- drivers/usb/host/xhci.h | 4 ++++ 2 files changed, 41 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 8c8da2d657fa..f11ec61bcc7d 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -908,6 +908,41 @@ static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci) spin_unlock_irqrestore(&xhci->lock, flags); } +static bool xhci_pending_portevent(struct xhci_hcd *xhci) +{ + struct xhci_port **ports; + int port_index; + u32 status; + u32 portsc; + + status = readl(&xhci->op_regs->status); + if (status & STS_EINT) + return true; + /* + * Checking STS_EINT is not enough as there is a lag between a change + * bit being set and the Port Status Change Event that it generated + * being written to the Event Ring. See note in xhci 1.1 section 4.19.2. + */ + + port_index = xhci->usb2_rhub.num_ports; + ports = xhci->usb2_rhub.ports; + while (port_index--) { + portsc = readl(ports[port_index]->addr); + if (portsc & PORT_CHANGE_MASK || + (portsc & PORT_PLS_MASK) == XDEV_RESUME) + return true; + } + port_index = xhci->usb3_rhub.num_ports; + ports = xhci->usb3_rhub.ports; + while (port_index--) { + portsc = readl(ports[port_index]->addr); + if (portsc & PORT_CHANGE_MASK || + (portsc & PORT_PLS_MASK) == XDEV_RESUME) + return true; + } + return false; +} + /* * Stop HC (not bus-specific) * @@ -1009,7 +1044,7 @@ EXPORT_SYMBOL_GPL(xhci_suspend); */ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) { - u32 command, temp = 0, status; + u32 command, temp = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); struct usb_hcd *secondary_hcd; int retval = 0; @@ -1134,8 +1169,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) done: if (retval == 0) { /* Resume root hubs only when have pending events. */ - status = readl(&xhci->op_regs->status); - if (status & STS_EINT) { + if (xhci_pending_portevent(xhci)) { usb_hcd_resume_root_hub(xhci->shared_hcd); usb_hcd_resume_root_hub(hcd); } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 939e2f86b595..841e89ffe2e9 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -382,6 +382,10 @@ struct xhci_op_regs { #define PORT_PLC (1 << 22) /* port configure error change - port failed to configure its link partner */ #define PORT_CEC (1 << 23) +#define PORT_CHANGE_MASK (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \ + PORT_RC | PORT_PLC | PORT_CEC) + + /* Cold Attach Status - xHC can set this bit to report device attached during * Sx state. Warm port reset should be perfomed to clear this bit and move port * to connected state. -- cgit v1.2.3 From d850c1658328e757635a46763783c6fd56390dcb Mon Sep 17 00:00:00 2001 From: Zhengjun Xing Date: Thu, 21 Jun 2018 16:19:42 +0300 Subject: xhci: Fix kernel oops in trace_xhci_free_virt_device commit 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device") set dev->udev pointer to NULL in xhci_free_dev(), it will cause kernel panic in trace_xhci_free_virt_device. This patch reimplement the trace function trace_xhci_free_virt_device, remove dev->udev dereference and added more useful parameters to show in the trace function,it also makes sure dev->udev is not NULL before calling trace_xhci_free_virt_device. This issue happened when xhci-hcd trace is enabled and USB devices hot plug test. Original use-after-free patch went to stable so this needs so be applied there as well. [ 1092.022457] usb 2-4: USB disconnect, device number 6 [ 1092.092772] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 1092.101694] PGD 0 P4D 0 [ 1092.104601] Oops: 0000 [#1] SMP [ 1092.207734] Workqueue: usb_hub_wq hub_event [ 1092.212507] RIP: 0010:trace_event_raw_event_xhci_log_virt_dev+0x6c/0xf0 [ 1092.220050] RSP: 0018:ffff8c252e883d28 EFLAGS: 00010086 [ 1092.226024] RAX: ffff8c24af86fa84 RBX: 0000000000000003 RCX: ffff8c25255c2a01 [ 1092.234130] RDX: 0000000000000000 RSI: 00000000aef55009 RDI: ffff8c252e883d28 [ 1092.242242] RBP: ffff8c252550e2c0 R08: ffff8c24af86fa84 R09: 0000000000000a70 [ 1092.250364] R10: 0000000000000a70 R11: 0000000000000000 R12: ffff8c251f21a000 [ 1092.258468] R13: 000000000000000c R14: ffff8c251f21a000 R15: ffff8c251f432f60 [ 1092.266572] FS: 0000000000000000(0000) GS:ffff8c252e880000(0000) knlGS:0000000000000000 [ 1092.275757] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1092.282281] CR2: 0000000000000000 CR3: 0000000154209001 CR4: 00000000003606e0 [ 1092.290384] Call Trace: [ 1092.293156] [ 1092.295439] xhci_free_virt_device.part.34+0x182/0x1a0 [ 1092.301288] handle_cmd_completion+0x7ac/0xfa0 [ 1092.306336] ? trace_event_raw_event_xhci_log_trb+0x6e/0xa0 [ 1092.312661] xhci_irq+0x3e8/0x1f60 [ 1092.316524] __handle_irq_event_percpu+0x75/0x180 [ 1092.321876] handle_irq_event_percpu+0x20/0x50 [ 1092.326922] handle_irq_event+0x36/0x60 [ 1092.331273] handle_edge_irq+0x6d/0x180 [ 1092.335644] handle_irq+0x16/0x20 [ 1092.339417] do_IRQ+0x41/0xc0 [ 1092.342782] common_interrupt+0xf/0xf [ 1092.346955] Fixes: 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device") Cc: Signed-off-by: Zhengjun Xing Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 4 ++-- drivers/usb/host/xhci-trace.h | 36 +++++++++++++++++++++++++++++++----- 2 files changed, 33 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index acbd3d7b8828..8a62eee9eee1 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -886,12 +886,12 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) dev = xhci->devs[slot_id]; - trace_xhci_free_virt_device(dev); - xhci->dcbaa->dev_context_ptrs[slot_id] = 0; if (!dev) return; + trace_xhci_free_virt_device(dev); + if (dev->tt_info) old_active_eps = dev->tt_info->active_eps; diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h index 410544ffe78f..88b427434bd8 100644 --- a/drivers/usb/host/xhci-trace.h +++ b/drivers/usb/host/xhci-trace.h @@ -171,6 +171,37 @@ DEFINE_EVENT(xhci_log_trb, xhci_dbc_gadget_ep_queue, TP_ARGS(ring, trb) ); +DECLARE_EVENT_CLASS(xhci_log_free_virt_dev, + TP_PROTO(struct xhci_virt_device *vdev), + TP_ARGS(vdev), + TP_STRUCT__entry( + __field(void *, vdev) + __field(unsigned long long, out_ctx) + __field(unsigned long long, in_ctx) + __field(u8, fake_port) + __field(u8, real_port) + __field(u16, current_mel) + + ), + TP_fast_assign( + __entry->vdev = vdev; + __entry->in_ctx = (unsigned long long) vdev->in_ctx->dma; + __entry->out_ctx = (unsigned long long) vdev->out_ctx->dma; + __entry->fake_port = (u8) vdev->fake_port; + __entry->real_port = (u8) vdev->real_port; + __entry->current_mel = (u16) vdev->current_mel; + ), + TP_printk("vdev %p ctx %llx | %llx fake_port %d real_port %d current_mel %d", + __entry->vdev, __entry->in_ctx, __entry->out_ctx, + __entry->fake_port, __entry->real_port, __entry->current_mel + ) +); + +DEFINE_EVENT(xhci_log_free_virt_dev, xhci_free_virt_device, + TP_PROTO(struct xhci_virt_device *vdev), + TP_ARGS(vdev) +); + DECLARE_EVENT_CLASS(xhci_log_virt_dev, TP_PROTO(struct xhci_virt_device *vdev), TP_ARGS(vdev), @@ -208,11 +239,6 @@ DEFINE_EVENT(xhci_log_virt_dev, xhci_alloc_virt_device, TP_ARGS(vdev) ); -DEFINE_EVENT(xhci_log_virt_dev, xhci_free_virt_device, - TP_PROTO(struct xhci_virt_device *vdev), - TP_ARGS(vdev) -); - DEFINE_EVENT(xhci_log_virt_dev, xhci_setup_device, TP_PROTO(struct xhci_virt_device *vdev), TP_ARGS(vdev) -- cgit v1.2.3 From 36eb93509c45d0bdbd8d09a01ab9d857972f5963 Mon Sep 17 00:00:00 2001 From: Dongjiu Geng Date: Thu, 21 Jun 2018 16:19:43 +0300 Subject: usb: xhci: remove the code build warning Initialize the 'err' variate to remove the build warning, the warning is shown as below: drivers/usb/host/xhci-tegra.c: In function 'tegra_xusb_mbox_thread': drivers/usb/host/xhci-tegra.c:552:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:482:6: note: 'err' was declared here Fixes: e84fce0f8837 ("usb: xhci: Add NVIDIA Tegra XUSB controller driver") Signed-off-by: Dongjiu Geng Acked-by: Thierry Reding Acked-by: Jon Hunter Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index a8c1d073cba0..d50549fedec8 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -481,7 +481,7 @@ static void tegra_xusb_mbox_handle(struct tegra_xusb *tegra, unsigned long mask; unsigned int port; bool idle, enable; - int err; + int err = 0; memset(&rsp, 0, sizeof(rsp)); -- cgit v1.2.3 From 3431a150fd89bc74cd2f2aaf6977cc0e278fb445 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Thu, 21 Jun 2018 16:19:44 +0300 Subject: usb: xhci: tegra: fix runtime PM error handling The address-of operator will always evaluate to true. However, power should be explicitly disabled if no power domain is used. Remove the address-of operator. Fixes: 58c38116c6cc ("usb: xhci: tegra: Add support for managing powergates") Signed-off-by: Stefan Agner Acked-by: Jon Hunter Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-tegra.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index d50549fedec8..4b463e5202a4 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1223,10 +1223,10 @@ disable_rpm: pm_runtime_disable(&pdev->dev); usb_put_hcd(tegra->hcd); disable_xusbc: - if (!&pdev->dev.pm_domain) + if (!pdev->dev.pm_domain) tegra_powergate_power_off(TEGRA_POWERGATE_XUSBC); disable_xusba: - if (!&pdev->dev.pm_domain) + if (!pdev->dev.pm_domain) tegra_powergate_power_off(TEGRA_POWERGATE_XUSBA); put_padctl: tegra_xusb_padctl_put(tegra->padctl); -- cgit v1.2.3 From 305886ca87be480ae159908c2affd135c04215cf Mon Sep 17 00:00:00 2001 From: Ajay Gupta Date: Thu, 21 Jun 2018 16:19:45 +0300 Subject: usb: xhci: increase CRS timeout value Some controllers take almost 55ms to complete controller restore state (CRS). There is no timeout limit mentioned in xhci specification so fixing the issue by increasing the timeout limit to 100ms [reformat code comment -Mathias] Signed-off-by: Ajay Gupta Signed-off-by: Nagaraj Annaiah Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index f11ec61bcc7d..2f4850f25e82 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1078,8 +1078,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) command = readl(&xhci->op_regs->command); command |= CMD_CRS; writel(command, &xhci->op_regs->command); + /* + * Some controllers take up to 55+ ms to complete the controller + * restore so setting the timeout to 100ms. Xhci specification + * doesn't mention any timeout value. + */ if (xhci_handshake(&xhci->op_regs->status, - STS_RESTORE, 0, 10 * 1000)) { + STS_RESTORE, 0, 100 * 1000)) { xhci_warn(xhci, "WARN: xHC restore state timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; -- cgit v1.2.3 From 8f732850df1b2b4d8d719f7e606dfb3050e7ea11 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 31 May 2018 13:49:29 +0200 Subject: HID: core: allow concurrent registration of drivers Detected on the Dell XPS 9365. The laptop has 2 devices that benefit from the hid-generic auto-unbinding. When those 2 devices are presented to the userspace, udev loads both wacom and hid-multitouch. When this happens, the code in __hid_bus_reprobe_drivers() is called concurrently and the second device gets reprobed twice. An other bug in the power_supply subsystem prevent to remove the wacom driver if it just finished its initialization, which basically kills the wacom node. [jkosina@suse.cz: reformat changelog a bit] Fixes c17a7476e4c4 ("HID: core: rewrite the hid-generic automatic unbind") Cc: stable@vger.kernel.org # v4.17 Tested-by: Mario Limonciello Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 5 ++++- include/linux/hid.h | 3 ++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 355dc7e49562..a460ec147aee 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1949,6 +1949,8 @@ static int hid_device_probe(struct device *dev) } hdev->io_started = false; + clear_bit(ffs(HID_STAT_REPROBED), &hdev->status); + if (!hdev->driver) { id = hid_match_device(hdev, hdrv); if (id == NULL) { @@ -2212,7 +2214,8 @@ static int __hid_bus_reprobe_drivers(struct device *dev, void *data) struct hid_device *hdev = to_hid_device(dev); if (hdev->driver == hdrv && - !hdrv->match(hdev, hid_ignore_special_drivers)) + !hdrv->match(hdev, hid_ignore_special_drivers) && + !test_and_set_bit(ffs(HID_STAT_REPROBED), &hdev->status)) return device_reprobe(dev); return 0; diff --git a/include/linux/hid.h b/include/linux/hid.h index 41a3d5775394..773bcb1d4044 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -511,6 +511,7 @@ struct hid_output_fifo { #define HID_STAT_ADDED BIT(0) #define HID_STAT_PARSED BIT(1) #define HID_STAT_DUP_DETECTED BIT(2) +#define HID_STAT_REPROBED BIT(3) struct hid_input { struct list_head list; @@ -579,7 +580,7 @@ struct hid_device { /* device report descriptor */ bool battery_avoid_query; #endif - unsigned int status; /* see STAT flags above */ + unsigned long status; /* see STAT flags above */ unsigned claimed; /* Claimed by hidinput, hiddev? */ unsigned quirks; /* Various quirks the device can pull on us */ bool io_started; /* If IO has started */ -- cgit v1.2.3 From d2d2e3c46be5d6dd8001d0eebdf7cafb9bc7006b Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 21 Jun 2018 16:43:17 +0300 Subject: acpi: Add helper for deactivating memory region Sometimes memory resource may be overlapping with SystemMemory Operation Region by design, for example if the memory region is used as a mailbox for communication with a firmware in the system. One occasion of such mailboxes is USB Type-C Connector System Software Interface (UCSI). With regions like that, it is important that the driver is able to map the memory with the requirements it has. For example, the driver should be allowed to map the memory as non-cached memory. However, if the operation region has been accessed before the driver has mapped the memory, the memory has been marked as write-back by the time the driver is loaded. That means the driver will fail to map the memory if it expects non-cached memory. To work around the problem, introducing helper that the drivers can use to temporarily deactivate (unmap) SystemMemory Operation Regions that overlap with their IO memory. Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver") Cc: stable@vger.kernel.org Reviewed-by: Rafael J. Wysocki Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman --- drivers/acpi/osl.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/acpi.h | 3 +++ 2 files changed, 75 insertions(+) diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 7ca41bf023c9..8df9abfa947b 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -45,6 +45,8 @@ #include #include +#include "acpica/accommon.h" +#include "acpica/acnamesp.h" #include "internal.h" #define _COMPONENT ACPI_OS_SERVICES @@ -1490,6 +1492,76 @@ int acpi_check_region(resource_size_t start, resource_size_t n, } EXPORT_SYMBOL(acpi_check_region); +static acpi_status acpi_deactivate_mem_region(acpi_handle handle, u32 level, + void *_res, void **return_value) +{ + struct acpi_mem_space_context **mem_ctx; + union acpi_operand_object *handler_obj; + union acpi_operand_object *region_obj2; + union acpi_operand_object *region_obj; + struct resource *res = _res; + acpi_status status; + + region_obj = acpi_ns_get_attached_object(handle); + if (!region_obj) + return AE_OK; + + handler_obj = region_obj->region.handler; + if (!handler_obj) + return AE_OK; + + if (region_obj->region.space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) + return AE_OK; + + if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) + return AE_OK; + + region_obj2 = acpi_ns_get_secondary_object(region_obj); + if (!region_obj2) + return AE_OK; + + mem_ctx = (void *)®ion_obj2->extra.region_context; + + if (!(mem_ctx[0]->address >= res->start && + mem_ctx[0]->address < res->end)) + return AE_OK; + + status = handler_obj->address_space.setup(region_obj, + ACPI_REGION_DEACTIVATE, + NULL, (void **)mem_ctx); + if (ACPI_SUCCESS(status)) + region_obj->region.flags &= ~(AOPOBJ_SETUP_COMPLETE); + + return status; +} + +/** + * acpi_release_memory - Release any mappings done to a memory region + * @handle: Handle to namespace node + * @res: Memory resource + * @level: A level that terminates the search + * + * Walks through @handle and unmaps all SystemMemory Operation Regions that + * overlap with @res and that have already been activated (mapped). + * + * This is a helper that allows drivers to place special requirements on memory + * region that may overlap with operation regions, primarily allowing them to + * safely map the region as non-cached memory. + * + * The unmapped Operation Regions will be automatically remapped next time they + * are called, so the drivers do not need to do anything else. + */ +acpi_status acpi_release_memory(acpi_handle handle, struct resource *res, + u32 level) +{ + if (!(res->flags & IORESOURCE_MEM)) + return AE_TYPE; + + return acpi_walk_namespace(ACPI_TYPE_REGION, handle, level, + acpi_deactivate_mem_region, NULL, res, NULL); +} +EXPORT_SYMBOL_GPL(acpi_release_memory); + /* * Let drivers know whether the resource checks are effective */ diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 4b35a66383f9..e54f40974eb0 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -443,6 +443,9 @@ int acpi_check_resource_conflict(const struct resource *res); int acpi_check_region(resource_size_t start, resource_size_t n, const char *name); +acpi_status acpi_release_memory(acpi_handle handle, struct resource *res, + u32 level); + int acpi_resources_are_enforced(void); #ifdef CONFIG_HIBERNATION -- cgit v1.2.3 From 1f9f9d168ce619608572b01771c47a41b15429e6 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 21 Jun 2018 16:43:18 +0300 Subject: usb: typec: ucsi: acpi: Workaround for cache mode issue This fixes an issue where the driver fails with an error: ioremap error for 0x3f799000-0x3f79a000, requested 0x2, got 0x0 On some platforms the UCSI ACPI mailbox SystemMemory Operation Region may be setup before the driver has been loaded. That will lead into the driver failing to map the mailbox region, as it has been already marked as write-back memory. acpi_os_ioremap() for x86 uses ioremap_cache() unconditionally. When the issue happens, the embedded controller has a pending query event for the UCSI notification right after boot-up which causes the operation region to be setup before UCSI driver has been loaded. The fix is to notify acpi core that the driver is about to access memory region which potentially overlaps with an operation region right before mapping it. acpi_release_memory() will check if the memory has already been setup (mapped) by acpi core, and deactivate it (unmap) if it has. The driver is then able to map the memory with ioremap_nocache() and set the memtype to uncached for the region. Reported-by: Paul Menzel Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/ucsi/ucsi_acpi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c index 44eb4e1ea817..a18112a83fae 100644 --- a/drivers/usb/typec/ucsi/ucsi_acpi.c +++ b/drivers/usb/typec/ucsi/ucsi_acpi.c @@ -79,6 +79,11 @@ static int ucsi_acpi_probe(struct platform_device *pdev) return -ENODEV; } + /* This will make sure we can use ioremap_nocache() */ + status = acpi_release_memory(ACPI_HANDLE(&pdev->dev), res, 1); + if (ACPI_FAILURE(status)) + return -ENOMEM; + /* * NOTE: The memory region for the data structures is used also in an * operation region, which means ACPI has already reserved it. Therefore -- cgit v1.2.3 From 68816e16b4789f2d05e77b6dcb77564cf5d6a8d8 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 21 Jun 2018 16:43:19 +0300 Subject: usb: typec: ucsi: Fix for incorrect status data issue According to UCSI Specification, Connector Change Event only means a change in the Connector Status and Operation Mode fields of the STATUS data structure. So any other change should create another event. Unfortunately on some platforms the firmware acting as PPM (platform policy manager - usually embedded controller firmware) still does not report any other status changes if there is a connector change event. So if the connector power or data role was changed when a device was plugged to the connector, the driver does not get any indication about that. The port will show wrong roles if that happens. To fix the issue, always checking the data and power role together with a connector change event. Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface") Signed-off-by: Heikki Krogerus Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/ucsi/ucsi.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index bd5cca5632b3..8d0a6fe748bd 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -350,6 +350,19 @@ static void ucsi_connector_change(struct work_struct *work) } if (con->status.change & UCSI_CONSTAT_CONNECT_CHANGE) { + typec_set_pwr_role(con->port, con->status.pwr_dir); + + switch (con->status.partner_type) { + case UCSI_CONSTAT_PARTNER_TYPE_UFP: + typec_set_data_role(con->port, TYPEC_HOST); + break; + case UCSI_CONSTAT_PARTNER_TYPE_DFP: + typec_set_data_role(con->port, TYPEC_DEVICE); + break; + default: + break; + } + if (con->status.connected) ucsi_register_partner(con); else -- cgit v1.2.3 From e16711c32bca59a29d8ef449eda5b8427dc6eb6d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 20 Jun 2018 17:05:42 -0700 Subject: staging/typec: fix tcpci_rt1711h build errors Fix Kconfig warning and build errors in staging/typec/rt1711h.c. The driver uses I2C interfaces so it should depend on I2C. WARNING: unmet direct dependencies detected for TYPEC_TCPCI Depends on [m]: STAGING [=y] && TYPEC_TCPM [=y] && I2C [=m] Selected by [y]: - TYPEC_RT1711H [=y] && STAGING [=y] && TYPEC_TCPM [=y] and then: drivers/staging/typec/tcpci.o: In function `tcpci_probe': ../drivers/staging/typec/tcpci.c:536: undefined reference to `__devm_regmap_init_i2c' drivers/staging/typec/tcpci.o: In function `tcpci_i2c_driver_init': ../drivers/staging/typec/tcpci.c:593: undefined reference to `i2c_register_driver' drivers/staging/typec/tcpci.o: In function `tcpci_i2c_driver_exit': ../drivers/staging/typec/tcpci.c:593: undefined reference to `i2c_del_driver' drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_check_revision': ../drivers/staging/typec/tcpci_rt1711h.c:218: undefined reference to `i2c_smbus_read_word_data' ../drivers/staging/typec/tcpci_rt1711h.c:225: undefined reference to `i2c_smbus_read_word_data' drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_probe': ../drivers/staging/typec/tcpci_rt1711h.c:251: undefined reference to `__devm_regmap_init_i2c' drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_i2c_driver_init': ../drivers/staging/typec/tcpci_rt1711h.c:308: undefined reference to `i2c_register_driver' drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_i2c_driver_exit': ../drivers/staging/typec/tcpci_rt1711h.c:308: undefined reference to `i2c_del_driver' Fixes: ce08eaeb6388 ("staging: typec: rt1711h typec chip driver") Reported-by: kbuild test robot Signed-off-by: Randy Dunlap Cc: ShuFan Lee Cc: kbuild-all@01.org Reviewed-by: Guenter Roeck Revieved-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman --- drivers/staging/typec/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/typec/Kconfig b/drivers/staging/typec/Kconfig index 3aa981fbc8f5..e45ed08a5166 100644 --- a/drivers/staging/typec/Kconfig +++ b/drivers/staging/typec/Kconfig @@ -11,6 +11,7 @@ config TYPEC_TCPCI config TYPEC_RT1711H tristate "Richtek RT1711H Type-C chip driver" + depends on I2C select TYPEC_TCPCI help Richtek RT1711H Type-C chip driver that works with -- cgit v1.2.3 From 4a762569a2722b8a48066c7bacf0e1dc67d17fa1 Mon Sep 17 00:00:00 2001 From: Houston Yaroschoff Date: Mon, 11 Jun 2018 12:39:09 +0200 Subject: usb: cdc_acm: Add quirk for Uniden UBC125 scanner Uniden UBC125 radio scanner has USB interface which fails to work with cdc_acm driver: usb 1-1.5: new full-speed USB device number 4 using xhci_hcd cdc_acm 1-1.5:1.0: Zero length descriptor references cdc_acm: probe of 1-1.5:1.0 failed with error -22 Adding the NO_UNION_NORMAL quirk for the device fixes the issue: usb 1-4: new full-speed USB device number 15 using xhci_hcd usb 1-4: New USB device found, idVendor=1965, idProduct=0018 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: UBC125XLT usb 1-4: Manufacturer: Uniden Corp. usb 1-4: SerialNumber: 0001 cdc_acm 1-4:1.0: ttyACM0: USB ACM device `lsusb -v` of the device: Bus 001 Device 015: ID 1965:0018 Uniden Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1965 Uniden Corporation idProduct 0x0018 bcdDevice 0.01 iManufacturer 1 Uniden Corp. iProduct 2 UBC125XLT iSerial 3 0001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 48 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 None iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Signed-off-by: Houston Yaroschoff Cc: stable Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 7b366a6c0b49..998b32d0167e 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1758,6 +1758,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x11ca, 0x0201), /* VeriFone Mx870 Gadget Serial */ .driver_info = SINGLE_RX_URB, }, + { USB_DEVICE(0x1965, 0x0018), /* Uniden UBC125XLT */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x22b8, 0x7000), /* Motorola Q Phone */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, -- cgit v1.2.3 From ecc443c03fb14abfb8a6af5e3b2d43b5257e60f2 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 7 Jun 2018 15:54:48 +0200 Subject: NFC: pn533: Fix wrong GFP flag usage pn533_recv_response() is an urb completion handler, so it must use GFP_ATOMIC. pn533_usb_send_frame() OTOH runs from a regular sleeping context, so the pn533_submit_urb_for_response() there (and only there) can use the regular GFP_KERNEL flags. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514134 Fixes: 9815c7cf22da ("NFC: pn533: Separate physical layer from ...") Cc: Michael Thalmeier Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/nfc/pn533/usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/nfc/pn533/usb.c b/drivers/nfc/pn533/usb.c index d5553c47014f..5d823e965883 100644 --- a/drivers/nfc/pn533/usb.c +++ b/drivers/nfc/pn533/usb.c @@ -74,7 +74,7 @@ static void pn533_recv_response(struct urb *urb) struct sk_buff *skb = NULL; if (!urb->status) { - skb = alloc_skb(urb->actual_length, GFP_KERNEL); + skb = alloc_skb(urb->actual_length, GFP_ATOMIC); if (!skb) { nfc_err(&phy->udev->dev, "failed to alloc memory\n"); } else { @@ -186,7 +186,7 @@ static int pn533_usb_send_frame(struct pn533 *dev, if (dev->protocol_type == PN533_PROTO_REQ_RESP) { /* request for response for sent packet directly */ - rc = pn533_submit_urb_for_response(phy, GFP_ATOMIC); + rc = pn533_submit_urb_for_response(phy, GFP_KERNEL); if (rc) goto error; } else if (dev->protocol_type == PN533_PROTO_REQ_ACK_RESP) { -- cgit v1.2.3 From 9578bcd0bb487b8ecef4b7eee799aafb678aa441 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 7 Jun 2018 16:17:14 +0300 Subject: typec: tcpm: Fix a msecs vs jiffies bug The tcpm_set_state() function take msecs not jiffies. Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Signed-off-by: Dan Carpenter Acked-by: Heikki Krogerus Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c index 8a201dd53d36..0dfd755020f4 100644 --- a/drivers/usb/typec/tcpm.c +++ b/drivers/usb/typec/tcpm.c @@ -3043,7 +3043,8 @@ static void run_state_machine(struct tcpm_port *port) tcpm_port_is_sink(port) && time_is_after_jiffies(port->delayed_runtime)) { tcpm_set_state(port, SNK_DISCOVERY, - port->delayed_runtime - jiffies); + jiffies_to_msecs(port->delayed_runtime - + jiffies)); break; } tcpm_set_state(port, unattached_state(port), 0); -- cgit v1.2.3 From d5a4f93511b7000183c0d528739b824752139f79 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 12 Jun 2018 09:53:01 +0800 Subject: usb: typec: tcpm: fix logbuffer index is wrong if _tcpm_log is re-entered The port->logbuffer_head may be wrong if the two processes enters _tcpm_log at the mostly same time. The 2nd process enters _tcpm_log before the 1st process update the index, then the 2nd process will not allocate logbuffer, when the 2nd process tries to use log buffer, the index has already updated by the 1st process, so it will get NULL pointer for updated logbuffer, the error message like below: tcpci 0-0050: Log buffer index 6 is NULL Cc: Heikki Krogerus Cc: Guenter Roeck Cc: Jun Li Signed-off-by: Peter Chen Reviewed-by: Heikki Krogerus Cc: stable Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c index 0dfd755020f4..d961f1ec0e08 100644 --- a/drivers/usb/typec/tcpm.c +++ b/drivers/usb/typec/tcpm.c @@ -418,17 +418,18 @@ static void _tcpm_log(struct tcpm_port *port, const char *fmt, va_list args) u64 ts_nsec = local_clock(); unsigned long rem_nsec; + mutex_lock(&port->logbuffer_lock); if (!port->logbuffer[port->logbuffer_head]) { port->logbuffer[port->logbuffer_head] = kzalloc(LOG_BUFFER_ENTRY_SIZE, GFP_KERNEL); - if (!port->logbuffer[port->logbuffer_head]) + if (!port->logbuffer[port->logbuffer_head]) { + mutex_unlock(&port->logbuffer_lock); return; + } } vsnprintf(tmpbuffer, sizeof(tmpbuffer), fmt, args); - mutex_lock(&port->logbuffer_lock); - if (tcpm_log_full(port)) { port->logbuffer_head = max(port->logbuffer_head - 1, 0); strcpy(tmpbuffer, "overflow"); -- cgit v1.2.3 From 8793bb7f4a9dd1396575d2e9337d331662cb7555 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 19 Jun 2018 13:14:56 -0700 Subject: kbuild: add macro for controlling warnings to linux/compiler.h I have occasionally run into a situation where it would make sense to control a compiler warning from a source file rather than doing so from a Makefile using the $(cc-disable-warning, ...) or $(cc-option, ...) helpers. The approach here is similar to what glibc uses, using __diag() and related macros to encapsulate a _Pragma("GCC diagnostic ...") statement that gets turned into the respective "#pragma GCC diagnostic ..." by the preprocessor when the macro gets expanded. Like glibc, I also have an argument to pass the affected compiler version, but decided to actually evaluate that one. For now, this supports GCC_4_6, GCC_4_7, GCC_4_8, GCC_4_9, GCC_5, GCC_6, GCC_7, GCC_8 and GCC_9. Adding support for CLANG_5 and other interesting versions is straightforward here. GNU compilers starting with gcc-4.2 could support it in principle, but "#pragma GCC diagnostic push" was only added in gcc-4.6, so it seems simpler to not deal with those at all. The same versions show a large number of warnings already, so it seems easier to just leave it at that and not do a more fine-grained control for them. The use cases I found so far include: - turning off the gcc-8 -Wattribute-alias warning inside of the SYSCALL_DEFINEx() macro without having to do it globally. - Reducing the build time for a simple re-make after a change, once we move the warnings from ./Makefile and ./scripts/Makefile.extrawarn into linux/compiler.h - More control over the warnings based on other configurations, using preprocessor syntax instead of Makefile syntax. This should make it easier for the average developer to understand and change things. - Adding an easy way to turn the W=1 option on unconditionally for a subdirectory or a specific file. This has been requested by several developers in the past that want to have their subsystems W=1 clean. - Integrating clang better into the build systems. Clang supports more warnings than GCC, and we probably want to classify them as default, W=1, W=2 etc, but there are cases in which the warnings should be classified differently due to excessive false positives from one or the other compiler. - Adding a way to turn the default warnings into errors (e.g. using a new "make E=0" tag) while not also turning the W=1 warnings into errors. This patch for now just adds the minimal infrastructure in order to do the first of the list above. As the #pragma GCC diagnostic takes precedence over command line options, the next step would be to convert a lot of the individual Makefiles that set nonstandard options to use __diag() instead. [paul.burton@mips.com: - Rebase atop current master. - Add __diag_GCC, or more generally __diag_, abstraction to avoid code outside of linux/compiler-gcc.h needing to duplicate knowledge about different GCC versions. - Add a comment argument to __diag_{ignore,warn,error} which isn't used in the expansion of the macros but serves to push people to document the reason for using them - per feedback from Kees Cook. - Translate severity to GCC-specific pragmas in linux/compiler-gcc.h rather than using GCC-specific in linux/compiler_types.h. - Drop all but GCC 8 macros, since we only need to define macros for versions that we need to introduce pragmas for, and as of this series that's just GCC 8. - Capitalize comments in linux/compiler-gcc.h to match the style of the rest of the file. - Line up macro definitions with tabs in linux/compiler-gcc.h.] Signed-off-by: Arnd Bergmann Signed-off-by: Paul Burton Tested-by: Christophe Leroy Tested-by: Stafford Horne Signed-off-by: Masahiro Yamada --- include/linux/compiler-gcc.h | 25 +++++++++++++++++++++++++ include/linux/compiler_types.h | 18 ++++++++++++++++++ 2 files changed, 43 insertions(+) diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index f1a7492a5cc8..fd282c7d3e5e 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -347,3 +347,28 @@ #if GCC_VERSION >= 50100 #define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1 #endif + +/* + * Turn individual warnings and errors on and off locally, depending + * on version. + */ +#define __diag_GCC(version, severity, s) \ + __diag_GCC_ ## version(__diag_GCC_ ## severity s) + +/* Severity used in pragma directives */ +#define __diag_GCC_ignore ignored +#define __diag_GCC_warn warning +#define __diag_GCC_error error + +/* Compilers before gcc-4.6 do not understand "#pragma GCC diagnostic push" */ +#if GCC_VERSION >= 40600 +#define __diag_str1(s) #s +#define __diag_str(s) __diag_str1(s) +#define __diag(s) _Pragma(__diag_str(GCC diagnostic s)) +#endif + +#if GCC_VERSION >= 80000 +#define __diag_GCC_8(s) __diag(s) +#else +#define __diag_GCC_8(s) +#endif diff --git a/include/linux/compiler_types.h b/include/linux/compiler_types.h index 6b79a9bba9a7..a8ba6b04152c 100644 --- a/include/linux/compiler_types.h +++ b/include/linux/compiler_types.h @@ -271,4 +271,22 @@ struct ftrace_likely_data { # define __native_word(t) (sizeof(t) == sizeof(char) || sizeof(t) == sizeof(short) || sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long)) #endif +#ifndef __diag +#define __diag(string) +#endif + +#ifndef __diag_GCC +#define __diag_GCC(version, severity, string) +#endif + +#define __diag_push() __diag(push) +#define __diag_pop() __diag(pop) + +#define __diag_ignore(compiler, version, option, comment) \ + __diag_ ## compiler(version, ignore, option) +#define __diag_warn(compiler, version, option, comment) \ + __diag_ ## compiler(version, warn, option) +#define __diag_error(compiler, version, option, comment) \ + __diag_ ## compiler(version, error, option) + #endif /* __LINUX_COMPILER_TYPES_H */ -- cgit v1.2.3 From bee20031772af3debe8cbaa234528f24c7892e8f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 19 Jun 2018 13:14:57 -0700 Subject: disable -Wattribute-alias warning for SYSCALL_DEFINEx() gcc-8 warns for every single definition of a system call entry point, e.g.: include/linux/compat.h:56:18: error: 'compat_sys_rt_sigprocmask' alias between functions of incompatible types 'long int(int, compat_sigset_t *, compat_sigset_t *, compat_size_t)' {aka 'long int(int, struct *, struct *, unsigned int)'} and 'long int(long int, long int, long int, long int)' [-Werror=attribute-alias] asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))\ ^~~~~~~~~~ include/linux/compat.h:45:2: note: in expansion of macro 'COMPAT_SYSCALL_DEFINEx' COMPAT_SYSCALL_DEFINEx(4, _##name, __VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~ kernel/signal.c:2601:1: note: in expansion of macro 'COMPAT_SYSCALL_DEFINE4' COMPAT_SYSCALL_DEFINE4(rt_sigprocmask, int, how, compat_sigset_t __user *, nset, ^~~~~~~~~~~~~~~~~~~~~~ include/linux/compat.h:60:18: note: aliased declaration here asmlinkage long compat_SyS##name(__MAP(x,__SC_LONG,__VA_ARGS__))\ ^~~~~~~~~~ The new warning seems reasonable in principle, but it doesn't help us here, since we rely on the type mismatch to sanitize the system call arguments. After I reported this as GCC PR82435, a new -Wno-attribute-alias option was added that could be used to turn the warning off globally on the command line, but I'd prefer to do it a little more fine-grained. Interestingly, turning a warning off and on again inside of a single macro doesn't always work, in this case I had to add an extra statement inbetween and decided to copy the __SC_TEST one from the native syscall to the compat syscall macro. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83256 for more details about this. [paul.burton@mips.com: - Rebase atop current master. - Split GCC & version arguments to __diag_ignore() in order to match changes to the preceding patch. - Add the comment argument to match the preceding patch.] Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82435 Signed-off-by: Arnd Bergmann Signed-off-by: Paul Burton Tested-by: Christophe Leroy Tested-by: Stafford Horne Signed-off-by: Masahiro Yamada --- include/linux/compat.h | 8 +++++++- include/linux/syscalls.h | 4 ++++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/include/linux/compat.h b/include/linux/compat.h index b1a5562b3215..c68acc47da57 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -72,6 +72,9 @@ */ #ifndef COMPAT_SYSCALL_DEFINEx #define COMPAT_SYSCALL_DEFINEx(x, name, ...) \ + __diag_push(); \ + __diag_ignore(GCC, 8, "-Wattribute-alias", \ + "Type aliasing is used to sanitize syscall arguments");\ asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)); \ asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \ __attribute__((alias(__stringify(__se_compat_sys##name)))); \ @@ -80,8 +83,11 @@ asmlinkage long __se_compat_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)); \ asmlinkage long __se_compat_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \ { \ - return __do_compat_sys##name(__MAP(x,__SC_DELOUSE,__VA_ARGS__));\ + long ret = __do_compat_sys##name(__MAP(x,__SC_DELOUSE,__VA_ARGS__));\ + __MAP(x,__SC_TEST,__VA_ARGS__); \ + return ret; \ } \ + __diag_pop(); \ static inline long __do_compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) #endif /* COMPAT_SYSCALL_DEFINEx */ diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 73810808cdf2..a368a68cb667 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -231,6 +231,9 @@ static inline int is_syscall_trace_event(struct trace_event_call *tp_event) */ #ifndef __SYSCALL_DEFINEx #define __SYSCALL_DEFINEx(x, name, ...) \ + __diag_push(); \ + __diag_ignore(GCC, 8, "-Wattribute-alias", \ + "Type aliasing is used to sanitize syscall arguments");\ asmlinkage long sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \ __attribute__((alias(__stringify(__se_sys##name)))); \ ALLOW_ERROR_INJECTION(sys##name, ERRNO); \ @@ -243,6 +246,7 @@ static inline int is_syscall_trace_event(struct trace_event_call *tp_event) __PROTECT(x, ret,__MAP(x,__SC_ARGS,__VA_ARGS__)); \ return ret; \ } \ + __diag_pop(); \ static inline long __do_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) #endif /* __SYSCALL_DEFINEx */ -- cgit v1.2.3 From ac8517440344dbe598f7c1c23e686c800b563061 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Tue, 19 Jun 2018 13:14:58 -0700 Subject: powerpc: Remove -Wattribute-alias pragmas With SYSCALL_DEFINEx() disabling -Wattribute-alias generically, there's no need to duplicate that for PowerPC syscalls. This reverts commit 415520373975 ("powerpc: fix build failure by disabling attribute-alias warning in pci_32") and commit 2479bfc9bc60 ("powerpc: Fix build by disabling attribute-alias warning for SYSCALL_DEFINEx"). Signed-off-by: Paul Burton Acked-by: Christophe Leroy Acked-by: Michael Ellerman Signed-off-by: Masahiro Yamada --- arch/powerpc/kernel/pci_32.c | 4 ---- arch/powerpc/kernel/pci_64.c | 4 ---- arch/powerpc/kernel/rtas.c | 4 ---- arch/powerpc/kernel/signal_32.c | 8 -------- arch/powerpc/kernel/signal_64.c | 4 ---- arch/powerpc/kernel/syscalls.c | 4 ---- arch/powerpc/mm/subpage-prot.c | 4 ---- 7 files changed, 32 deletions(-) diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 4f861055a852..d63b488d34d7 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -285,9 +285,6 @@ pci_bus_to_hose(int bus) * Note that the returned IO or memory base is a physical address */ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, bus, unsigned long, devfn) { @@ -313,4 +310,3 @@ SYSCALL_DEFINE3(pciconfig_iobase, long, which, return result; } -#pragma GCC diagnostic pop diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 812171c09f42..dff28f903512 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -203,9 +203,6 @@ void pcibios_setup_phb_io_space(struct pci_controller *hose) #define IOBASE_ISA_IO 3 #define IOBASE_ISA_MEM 4 -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, in_bus, unsigned long, in_devfn) { @@ -259,7 +256,6 @@ SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, in_bus, return -EOPNOTSUPP; } -#pragma GCC diagnostic pop #ifdef CONFIG_NUMA int pcibus_to_node(struct pci_bus *bus) diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 7fb9f83dcde8..8afd146bc9c7 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -1051,9 +1051,6 @@ struct pseries_errorlog *get_pseries_errorlog(struct rtas_error_log *log, } /* We assume to be passed big endian arguments */ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs) { struct rtas_args args; @@ -1140,7 +1137,6 @@ SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs) return 0; } -#pragma GCC diagnostic pop /* * Call early during boot, before mem init, to retrieve the RTAS diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 5eedbb282d42..e6474a45cef5 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -1038,9 +1038,6 @@ static int do_setcontext_tm(struct ucontext __user *ucp, } #endif -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" #ifdef CONFIG_PPC64 COMPAT_SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx, struct ucontext __user *, new_ctx, int, ctx_size) @@ -1134,7 +1131,6 @@ SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx, set_thread_flag(TIF_RESTOREALL); return 0; } -#pragma GCC diagnostic pop #ifdef CONFIG_PPC64 COMPAT_SYSCALL_DEFINE0(rt_sigreturn) @@ -1231,9 +1227,6 @@ SYSCALL_DEFINE0(rt_sigreturn) return 0; } -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" #ifdef CONFIG_PPC32 SYSCALL_DEFINE3(debug_setcontext, struct ucontext __user *, ctx, int, ndbg, struct sig_dbg_op __user *, dbg) @@ -1337,7 +1330,6 @@ SYSCALL_DEFINE3(debug_setcontext, struct ucontext __user *, ctx, return 0; } #endif -#pragma GCC diagnostic pop /* * OK, we're invoking a handler diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index d42b60020389..83d51bf586c7 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -625,9 +625,6 @@ static long setup_trampoline(unsigned int syscall, unsigned int __user *tramp) /* * Handle {get,set,swap}_context operations */ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx, struct ucontext __user *, new_ctx, long, ctx_size) { @@ -693,7 +690,6 @@ SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx, set_thread_flag(TIF_RESTOREALL); return 0; } -#pragma GCC diagnostic pop /* diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index 083fa06962fd..466216506eb2 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -62,9 +62,6 @@ out: return ret; } -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE6(mmap2, unsigned long, addr, size_t, len, unsigned long, prot, unsigned long, flags, unsigned long, fd, unsigned long, pgoff) @@ -78,7 +75,6 @@ SYSCALL_DEFINE6(mmap, unsigned long, addr, size_t, len, { return do_mmap2(addr, len, prot, flags, fd, offset, PAGE_SHIFT); } -#pragma GCC diagnostic pop #ifdef CONFIG_PPC32 /* diff --git a/arch/powerpc/mm/subpage-prot.c b/arch/powerpc/mm/subpage-prot.c index 75cb646a79c3..9d16ee251fc0 100644 --- a/arch/powerpc/mm/subpage-prot.c +++ b/arch/powerpc/mm/subpage-prot.c @@ -186,9 +186,6 @@ static void subpage_mark_vma_nohuge(struct mm_struct *mm, unsigned long addr, * in a 2-bit field won't allow writes to a page that is otherwise * write-protected. */ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE3(subpage_prot, unsigned long, addr, unsigned long, len, u32 __user *, map) { @@ -272,4 +269,3 @@ SYSCALL_DEFINE3(subpage_prot, unsigned long, addr, up_write(&mm->mmap_sem); return err; } -#pragma GCC diagnostic pop -- cgit v1.2.3 From 5391e536dbf702de6581369e47c9c4cea3a87170 Mon Sep 17 00:00:00 2001 From: Sven Joachim Date: Mon, 18 Jun 2018 19:45:25 +0200 Subject: stack-protector: Fix test with 32-bit userland and CONFIG_64BIT=y When building a 64-bit 4.18-rc1 kernel with a 32-bit userland, I noticed that stack protection was silently disabled. Adding -m64 in gcc-x86_64-has-stack-protector.sh fixed that, similar to what has been noticed in commit 2a61f4747eea ("stack-protector: test compiler capability in Kconfig and drop AUTO mode") for gcc-x86_32-has-stack-protector.sh. Signed-off-by: Sven Joachim Signed-off-by: Masahiro Yamada --- scripts/gcc-x86_64-has-stack-protector.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/gcc-x86_64-has-stack-protector.sh b/scripts/gcc-x86_64-has-stack-protector.sh index 3755af0cd9f7..75e4e22b986a 100755 --- a/scripts/gcc-x86_64-has-stack-protector.sh +++ b/scripts/gcc-x86_64-has-stack-protector.sh @@ -1,4 +1,4 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 -echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -c -O0 -mcmodel=kernel -fno-PIE -fstack-protector - -o - 2> /dev/null | grep -q "%gs" +echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -c -m64 -O0 -mcmodel=kernel -fno-PIE -fstack-protector - -o - 2> /dev/null | grep -q "%gs" -- cgit v1.2.3 From b2d00d7c61c84edd150310af3f556f8a3c6e2e67 Mon Sep 17 00:00:00 2001 From: Dirk Gouders Date: Thu, 21 Jun 2018 15:30:54 +0200 Subject: kconfig: fix line numbers for if-entries in menu tree The line numers for if-entries in the menu tree are off by one or more lines which is confusing when debugging for correctness of unrelated changes. According to the git log, commit a02f0570ae201c49 (kconfig: improve error handling in the parser) was the last one that changed that part of the parser and replaced "if_entry: T_IF expr T_EOL" by "if_entry: T_IF expr nl" but the commit message does not state why this has been done. When reverting that part of the commit, only the line numers are corrected (checked with cdebug = DEBUG_PARSE in zconf.y), otherwise the menu tree remains unchanged (checked with zconfdump() enabled in conf.c). An example for the corrected line numbers: drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig drivers/soc/tegra/Kconfig:4:if drivers/soc/tegra/Kconfig:6:if changes to: drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig drivers/soc/tegra/Kconfig:1:if drivers/soc/tegra/Kconfig:4:if Signed-off-by: Dirk Gouders Signed-off-by: Masahiro Yamada --- scripts/kconfig/zconf.y | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y index 6f9b0aa32a82..ed84d4a8e288 100644 --- a/scripts/kconfig/zconf.y +++ b/scripts/kconfig/zconf.y @@ -31,7 +31,7 @@ struct symbol *symbol_hash[SYMBOL_HASHSIZE]; static struct menu *current_menu, *current_entry; %} -%expect 32 +%expect 31 %union { @@ -337,7 +337,7 @@ choice_block: /* if entry */ -if_entry: T_IF expr nl +if_entry: T_IF expr T_EOL { printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno()); menu_add_entry(NULL); -- cgit v1.2.3 From bdb60101df4a2999608430112a5abfb78628db1e Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 22 Jun 2018 20:08:21 -0700 Subject: kconfig: document Kconfig source file comments I saw this type of Kconfig construct on LKML: config SYMBOOL #bool "prompt string" default y and wondered what it does. Then I wondered if '#' comments are even documented. They aren't, so add a little doc for that. Ah, good. kconfig says: arch/x86/Kconfig:2942:warning: config symbol defined without type Signed-off-by: Randy Dunlap Signed-off-by: Masahiro Yamada --- Documentation/kbuild/kconfig-language.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt index 3534a84d206c..64e0775a62d4 100644 --- a/Documentation/kbuild/kconfig-language.txt +++ b/Documentation/kbuild/kconfig-language.txt @@ -430,6 +430,12 @@ This sets the config program's title bar if the config program chooses to use it. It should be placed at the top of the configuration, before any other statement. +'#' Kconfig source file comment: + +An unquoted '#' character anywhere in a source file line indicates +the beginning of a source file comment. The remainder of that line +is a comment. + Kconfig hints ------------- -- cgit v1.2.3 From 1376b0a2160319125c3a2822e8c09bd283cd8141 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 5 Jun 2018 12:36:30 +0300 Subject: staging: comedi: quatech_daqp_cs: fix no-op loop daqp_ao_insn_write() There is a '>' vs '<' typo so this loop is a no-op. Fixes: d35dcc89fc93 ("staging: comedi: quatech_daqp_cs: fix daqp_ao_insn_write()") Signed-off-by: Dan Carpenter Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/quatech_daqp_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index ea194aa01a64..257b0daff01f 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -642,7 +642,7 @@ static int daqp_ao_insn_write(struct comedi_device *dev, /* Make sure D/A update mode is direct update */ outb(0, dev->iobase + DAQP_AUX_REG); - for (i = 0; i > insn->n; i++) { + for (i = 0; i < insn->n; i++) { unsigned int val = data[i]; int ret; -- cgit v1.2.3 From 0a2bc00341dcfcc793c0dbf4f8d43adf60458b05 Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Mon, 11 Jun 2018 11:06:53 -0700 Subject: staging: android: ion: Return an ERR_PTR in ion_map_kernel The expected return value from ion_map_kernel is an ERR_PTR. The error path for a vmalloc failure currently just returns NULL, triggering a warning in ion_buffer_kmap_get. Encode the vmalloc failure as an ERR_PTR. Reported-by: syzbot+55b1d9f811650de944c6@syzkaller.appspotmail.com Signed-off-by: Laura Abbott Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/ion/ion_heap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/android/ion/ion_heap.c b/drivers/staging/android/ion/ion_heap.c index e8c440329708..31db510018a9 100644 --- a/drivers/staging/android/ion/ion_heap.c +++ b/drivers/staging/android/ion/ion_heap.c @@ -30,7 +30,7 @@ void *ion_heap_map_kernel(struct ion_heap *heap, struct page **tmp = pages; if (!pages) - return NULL; + return ERR_PTR(-ENOMEM); if (buffer->flags & ION_FLAG_CACHED) pgprot = PAGE_KERNEL; -- cgit v1.2.3 From 01766229533f9bdb1144a41b4345c8c7286da7b4 Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Mon, 11 Jun 2018 09:31:52 +0200 Subject: perf record: Support s390 random socket_id assignment On s390 the socket identifier assigned to a CPU identifier is random and (depending on the configuration of the LPAR) may be higher than the CPU identifier. This is currently not supported. Fix this by allowing arbitrary socket identifiers being assigned to CPU id. Output before: [root@p23lp27 perf]# ./perf report --header -I -v ... socket_id number is too big.You may need to upgrade the perf tool. Error: The perf.data file has no samples! # ======== # captured on : Tue May 29 09:29:57 2018 # header version : 1 ... # Core ID and Socket ID information is not available ... [root@p23lp27 perf]# Output after: [root@p23lp27 perf]# ./perf report --header -I -v ... Error: The perf.data file has no samples! # ======== # captured on : Tue May 29 09:29:57 2018 # header version : 1 ... # CPU 0: Core ID 0, Socket ID 6 # CPU 1: Core ID 1, Socket ID 3 # CPU 2: Core ID -1, Socket ID -1 ... [root@p23lp27 perf]# Signed-off-by: Thomas Richter Reviewed-by: Hendrik Brueckner Cc: Heiko Carstens Cc: Martin Schwidefsky Link: http://lkml.kernel.org/r/20180611073153.15592-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/header.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index 540cd2dcd3e7..59fcc790c865 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -2129,6 +2129,7 @@ static int process_cpu_topology(struct feat_fd *ff, void *data __maybe_unused) int cpu_nr = ff->ph->env.nr_cpus_avail; u64 size = 0; struct perf_header *ph = ff->ph; + bool do_core_id_test = true; ph->env.cpu = calloc(cpu_nr, sizeof(*ph->env.cpu)); if (!ph->env.cpu) @@ -2183,6 +2184,13 @@ static int process_cpu_topology(struct feat_fd *ff, void *data __maybe_unused) return 0; } + /* On s390 the socket_id number is not related to the numbers of cpus. + * The socket_id number might be higher than the numbers of cpus. + * This depends on the configuration. + */ + if (ph->env.arch && !strncmp(ph->env.arch, "s390", 4)) + do_core_id_test = false; + for (i = 0; i < (u32)cpu_nr; i++) { if (do_read_u32(ff, &nr)) goto free_cpu; @@ -2192,7 +2200,7 @@ static int process_cpu_topology(struct feat_fd *ff, void *data __maybe_unused) if (do_read_u32(ff, &nr)) goto free_cpu; - if (nr != (u32)-1 && nr > (u32)cpu_nr) { + if (do_core_id_test && nr != (u32)-1 && nr > (u32)cpu_nr) { pr_debug("socket_id number is too big." "You may need to upgrade the perf tool.\n"); goto free_cpu; -- cgit v1.2.3 From b930e62ecd362843002bdf84c2940439822af321 Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Mon, 11 Jun 2018 09:31:53 +0200 Subject: perf test session topology: Fix test on s390 On s390 this test case fails because the socket identifiction numbers assigned to the CPU are higher than the CPU identification numbers. F/ix this by adding the platform architecture into the perf data header flag information. This helps identifiing the test platform and handles s390 specifics in process_cpu_topology(). Before: [root@p23lp27 perf]# perf test -vvvvv -F 39 39: Session topology : --- start --- templ file: /tmp/perf-test-iUv755 socket_id number is too big.You may need to upgrade the perf tool. ---- end ---- Session topology: Skip [root@p23lp27 perf]# After: [root@p23lp27 perf]# perf test -vvvvv -F 39 39: Session topology : --- start --- templ file: /tmp/perf-test-8X8VTs CPU 0, core 0, socket 6 CPU 1, core 1, socket 3 ---- end ---- Session topology: Ok [root@p23lp27 perf]# Signed-off-by: Thomas Richter Reviewed-by: Hendrik Brueckner Cc: Heiko Carstens Cc: Martin Schwidefsky Fixes: c84974ed9fb6 ("perf test: Add entry to test cpu topology") Link: http://lkml.kernel.org/r/20180611073153.15592-2-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/topology.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/perf/tests/topology.c b/tools/perf/tests/topology.c index 40e30a26b23c..9497d02f69e6 100644 --- a/tools/perf/tests/topology.c +++ b/tools/perf/tests/topology.c @@ -45,6 +45,7 @@ static int session_write_header(char *path) perf_header__set_feat(&session->header, HEADER_CPU_TOPOLOGY); perf_header__set_feat(&session->header, HEADER_NRCPUS); + perf_header__set_feat(&session->header, HEADER_ARCH); session->header.data_size += DATA_SIZE; -- cgit v1.2.3 From 143c99f6ac6812d23254e80844d6e34be897d3e1 Mon Sep 17 00:00:00 2001 From: Sandipan Das Date: Mon, 11 Jun 2018 16:10:49 +0530 Subject: perf report powerpc: Fix crash if callchain is empty For some cases, the callchain provided by the kernel may be empty. So, the callchain ip filtering code will cause a crash if we do not check whether the struct ip_callchain pointer is NULL before accessing any members. This can be observed on a powerpc64le system running Fedora 27 as shown below. # perf record -b -e cycles:u ls Before: # perf report --branch-history perf: Segmentation fault -------- backtrace -------- perf[0x1027615c] linux-vdso64.so.1(__kernel_sigtramp_rt64+0x0)[0x7fff856304d8] perf(arch_skip_callchain_idx+0x44)[0x10257c58] perf[0x1017f2e4] perf(thread__resolve_callchain+0x124)[0x1017ff5c] perf(sample__resolve_callchain+0xf0)[0x10172788] ... After: # perf report --branch-history Samples: 25 of event 'cycles:u', Event count (approx.): 2306870 Overhead Source:Line Symbol Shared Object + 11.60% _init+35736 [.] _init ls + 9.84% strcoll_l.c:137 [.] __strcoll_l libc-2.26.so + 9.16% memcpy.S:175 [.] __memcpy_power7 libc-2.26.so + 9.01% gconv_charset.h:54 [.] _nl_find_locale libc-2.26.so + 8.87% dl-addr.c:52 [.] _dl_addr libc-2.26.so + 8.83% _init+236 [.] _init ls ... Reported-by: Ravi Bangoria Signed-off-by: Sandipan Das Acked-by: Ravi Bangoria Cc: Jiri Olsa Cc: Naveen N. Rao Cc: Sukadev Bhattiprolu Link: http://lkml.kernel.org/r/20180611104049.11048-1-sandipan@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/arch/powerpc/util/skip-callchain-idx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/arch/powerpc/util/skip-callchain-idx.c b/tools/perf/arch/powerpc/util/skip-callchain-idx.c index 3598b8b75d27..ef5d59a5742e 100644 --- a/tools/perf/arch/powerpc/util/skip-callchain-idx.c +++ b/tools/perf/arch/powerpc/util/skip-callchain-idx.c @@ -243,7 +243,7 @@ int arch_skip_callchain_idx(struct thread *thread, struct ip_callchain *chain) u64 ip; u64 skip_slot = -1; - if (chain->nr < 3) + if (!chain || chain->nr < 3) return skip_slot; ip = chain->ips[2]; -- cgit v1.2.3 From 933ccf2002aaef1037cb676622a694f5390c3d59 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Mon, 11 Jun 2018 11:34:21 +0200 Subject: perf tests: Add event parsing error handling to parse events test Add missing error handling for parse_events calls in test_event function that led to following segfault on s390: running test 52 'intel_pt//u' perf: Segmentation fault ... /lib64/libc.so.6(vasprintf+0xe6) [0x3fffca3f106] /lib64/libc.so.6(asprintf+0x46) [0x3fffca1aa96] ./perf(parse_events_add_pmu+0xb8) [0x80132088] ./perf(parse_events_parse+0xc62) [0x8019529a] ./perf(parse_events+0x98) [0x801341c0] ./perf(test__parse_events+0x48) [0x800cd140] ./perf(cmd_test+0x26a) [0x800bd44a] test child interrupted Adding the struct parse_events_error argument to parse_events call. Also adding parse_events_print_error to get more details on the parsing failures, like: # perf test 6 -v running test 52 'intel_pt//u'failed to parse event 'intel_pt//u', err 1, str 'Cannot find PMU `intel_pt'. Missing kernel support?' event syntax error: 'intel_pt//u' \___ Cannot find PMU `intel_pt'. Missing kernel support? Committer note: Use named initializers in the struct parse_events_error variable to avoid breaking the build on centos5, 6 and others with a similar gcc: cc1: warnings being treated as errors tests/parse-events.c: In function 'test_event': tests/parse-events.c:1696: error: missing initializer tests/parse-events.c:1696: error: (near initialization for 'err.str') Reported-by: Kim Phillips Signed-off-by: Jiri Olsa Tested-by: Kim Phillips Cc: Alexander Shishkin Cc: David Ahern Cc: Heiko Carstens Cc: Hendrik Brueckner Cc: Martin Schwidefsky Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Richter Link: http://lkml.kernel.org/r/20180611093422.1005-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/parse-events.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/tools/perf/tests/parse-events.c b/tools/perf/tests/parse-events.c index 7d4077068454..9751e7563a45 100644 --- a/tools/perf/tests/parse-events.c +++ b/tools/perf/tests/parse-events.c @@ -1686,6 +1686,7 @@ static struct terms_test test__terms[] = { static int test_event(struct evlist_test *e) { + struct parse_events_error err = { .idx = 0, }; struct perf_evlist *evlist; int ret; @@ -1693,10 +1694,11 @@ static int test_event(struct evlist_test *e) if (evlist == NULL) return -ENOMEM; - ret = parse_events(evlist, e->name, NULL); + ret = parse_events(evlist, e->name, &err); if (ret) { - pr_debug("failed to parse event '%s', err %d\n", - e->name, ret); + pr_debug("failed to parse event '%s', err %d, str '%s'\n", + e->name, ret, err.str); + parse_events_print_error(&err, e->name); } else { ret = e->check(evlist); } -- cgit v1.2.3 From 16ddcfbf7f3d07aa781e26b39f2c28636a4ed2fd Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Mon, 11 Jun 2018 11:34:22 +0200 Subject: perf tests: Add valid callback for parse-events test Adding optional 'valid' callback for events tests in parse-events object, so we don't try to parse PMUs, which are not supported. Following line is displayed for skipped test: running test 52 'intel_pt//u'... SKIP Committer note: Use named initializers in the struct evlist_test variable to avoid breaking the build on centos:5, 6 and others with a similar gcc: cc1: warnings being treated as errors tests/parse-events.c: In function 'test_pmu_events': tests/parse-events.c:1817: error: missing initializer tests/parse-events.c:1817: error: (near initialization for 'e.type') Signed-off-by: Jiri Olsa Cc: Alexander Shishkin Cc: David Ahern Cc: Heiko Carstens Cc: Hendrik Brueckner Cc: Kim Phillips Cc: Martin Schwidefsky Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Richter Link: http://lkml.kernel.org/r/20180611093422.1005-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/parse-events.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/tools/perf/tests/parse-events.c b/tools/perf/tests/parse-events.c index 9751e7563a45..61211918bfba 100644 --- a/tools/perf/tests/parse-events.c +++ b/tools/perf/tests/parse-events.c @@ -1309,6 +1309,11 @@ static int test__checkevent_config_cache(struct perf_evlist *evlist) return 0; } +static bool test__intel_pt_valid(void) +{ + return !!perf_pmu__find("intel_pt"); +} + static int test__intel_pt(struct perf_evlist *evlist) { struct perf_evsel *evsel = perf_evlist__first(evlist); @@ -1375,6 +1380,7 @@ struct evlist_test { const char *name; __u32 type; const int id; + bool (*valid)(void); int (*check)(struct perf_evlist *evlist); }; @@ -1648,6 +1654,7 @@ static struct evlist_test test__events[] = { }, { .name = "intel_pt//u", + .valid = test__intel_pt_valid, .check = test__intel_pt, .id = 52, }, @@ -1690,6 +1697,11 @@ static int test_event(struct evlist_test *e) struct perf_evlist *evlist; int ret; + if (e->valid && !e->valid()) { + pr_debug("... SKIP"); + return 0; + } + evlist = perf_evlist__new(); if (evlist == NULL) return -ENOMEM; @@ -1716,10 +1728,11 @@ static int test_events(struct evlist_test *events, unsigned cnt) for (i = 0; i < cnt; i++) { struct evlist_test *e = &events[i]; - pr_debug("running test %d '%s'\n", e->id, e->name); + pr_debug("running test %d '%s'", e->id, e->name); ret1 = test_event(e); if (ret1) ret2 = ret1; + pr_debug("\n"); } return ret2; @@ -1801,7 +1814,7 @@ static int test_pmu_events(void) } while (!ret && (ent = readdir(dir))) { - struct evlist_test e; + struct evlist_test e = { .id = 0, }; char name[2 * NAME_MAX + 1 + 12 + 3]; /* Names containing . are special and cannot be used directly */ -- cgit v1.2.3 From 621a5a327c1e36ffd7bb567f44a559f64f76358f Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 7 Jun 2018 14:30:02 +0300 Subject: perf intel-pt: Fix packet decoding of CYC packets Use a 64-bit type so that the cycle count is not limited to 32-bits. Signed-off-by: Adrian Hunter Cc: Jiri Olsa Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1528371002-8862-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c b/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c index ba4c9dd18643..d426761a549d 100644 --- a/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c +++ b/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c @@ -366,7 +366,7 @@ static int intel_pt_get_cyc(unsigned int byte, const unsigned char *buf, if (len < offs) return INTEL_PT_NEED_MORE_BYTES; byte = buf[offs++]; - payload |= (byte >> 1) << shift; + payload |= ((uint64_t)byte >> 1) << shift; } packet->type = INTEL_PT_CYC; -- cgit v1.2.3 From 7b818dc57230bf050bbc4218cd4df8ec59b9945d Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 15 Jun 2018 11:33:35 -0300 Subject: tools headers uapi: Synchronize drm/drm.h To pick up the new ioctls added in these csets: 7595bda2fb43 ("drm: Add DRM client cap for aspect-ratio") The DRM caps are not yet being decoded in 'perf trace', so this sync doesn't incur in any change in behaviour in any tools, just silencing this tools/perf/ build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h' Cc: Adrian Hunter Cc: Ankit Nautiyal Cc: David Ahern Cc: Jiri Olsa Cc: Maarten Lankhorst Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-atwz0arwanq1npu8pptwkoxt@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/drm/drm.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/tools/include/uapi/drm/drm.h b/tools/include/uapi/drm/drm.h index 6fdff5945c8a..9c660e1688ab 100644 --- a/tools/include/uapi/drm/drm.h +++ b/tools/include/uapi/drm/drm.h @@ -680,6 +680,13 @@ struct drm_get_cap { */ #define DRM_CLIENT_CAP_ATOMIC 3 +/** + * DRM_CLIENT_CAP_ASPECT_RATIO + * + * If set to 1, the DRM core will provide aspect ratio information in modes. + */ +#define DRM_CLIENT_CAP_ASPECT_RATIO 4 + /** DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */ struct drm_set_client_cap { __u64 capability; -- cgit v1.2.3 From b1494ec029af6d6ea189cbc96ad66463f8df3579 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 15 Jun 2018 11:48:43 -0300 Subject: perf tools: Update x86's syscall_64.tbl, adding 'io_pgetevents' and 'rseq' This updates the tools/perf/ copy of the system call table for x86 which makes 'perf trace' become aware of the new 'io_pgetevents' and 'rseq' syscalls, no matter in which system it gets built, i.e. older systems where the syscalls are not available in the running kernel (via tracefs) or in the system headers will still be aware of these syscalls/. These are the csets introducing the source drift: 05c17cedf85b ("x86: Wire up restartable sequence system call") 7a074e96dee6 ("aio: implement io_pgetevents") This results in this build time change: $ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.old /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c --- /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.old 2018-06-15 11:48:17.648948094 -0300 +++ /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c 2018-06-15 11:48:22.133942480 -0300 @@ -332,5 +332,7 @@ [330] = "pkey_alloc", [331] = "pkey_free", [332] = "statx", + [333] = "io_pgetevents", + [334] = "rseq", }; -#define SYSCALLTBL_x86_64_MAX_ID 332 +#define SYSCALLTBL_x86_64_MAX_ID 334 $ This silences the following tools/perf/ build warning: Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' Cc: Adrian Hunter Cc: Christoph Hellwig Cc: David Ahern Cc: Jiri Olsa Cc: Mathieu Desnoyers Cc: Namhyung Kim Cc: Thomas Gleixner Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-tfvyz51sabuzemrszbrhzxni@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/arch/x86/entry/syscalls/syscall_64.tbl | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl index 4dfe42666d0c..f0b1709a5ffb 100644 --- a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl +++ b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl @@ -341,6 +341,8 @@ 330 common pkey_alloc __x64_sys_pkey_alloc 331 common pkey_free __x64_sys_pkey_free 332 common statx __x64_sys_statx +333 common io_pgetevents __x64_sys_io_pgetevents +334 common rseq __x64_sys_rseq # # x32-specific system call numbers start at 512 to avoid cache impact -- cgit v1.2.3 From 801f5e1ac783df9fafff8899ef2d5511bd4dbdcb Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 15 Jun 2018 12:04:32 -0300 Subject: tools include powerpc: Update arch/powerpc/include/uapi/asm/unistd.h copy to get 'rseq' syscall This updates the tools/perf/ copy of the powerpc file used to generate the syscall table file used to make 'perf trace' become aware of the new 'rseq' syscall, no matter in which system it gets built, i.e. older systems where the syscalls are not available in the running kernel (via tracefs) or in the system headers will still be aware of these syscalls/. From this commit: bb862b021d75 ("powerpc: Wire up restartable sequences system call") Silencing this tools/perf build warning: Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/unistd.h' differs from latest version at 'arch/powerpc/include/uapi/asm/unistd.h' Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Boqun Feng Cc: David Ahern Cc: Hendrik Brueckner Cc: Jiri Olsa Cc: Mathieu Desnoyers Cc: Michael Ellerman Cc: Namhyung Kim Cc: Ravi Bangoria Cc: Thomas Gleixner Cc: Thomas Richter Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-adtgz6u3apd76tghiu9w0k19@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/arch/powerpc/include/uapi/asm/unistd.h | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/arch/powerpc/include/uapi/asm/unistd.h b/tools/arch/powerpc/include/uapi/asm/unistd.h index 389c36fd8299..ac5ba55066dd 100644 --- a/tools/arch/powerpc/include/uapi/asm/unistd.h +++ b/tools/arch/powerpc/include/uapi/asm/unistd.h @@ -398,5 +398,6 @@ #define __NR_pkey_alloc 384 #define __NR_pkey_free 385 #define __NR_pkey_mprotect 386 +#define __NR_rseq 387 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */ -- cgit v1.2.3 From bb9a33cb8a807e5ae9906563f5c1533904651b8b Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 15 Jun 2018 16:46:57 -0300 Subject: tools include uapi: Update if_link.h to pick IFLA_{BRPORT_ISOLATED,VXLAN_TTL_INHERIT} The IFLA_BRPORT_ISOLATED and IFLA_VXLAN_TTL_INHERIT defines were added in: 7d850abd5f4e ("net: bridge: add support for port isolation") 72f6d71e491e ("vxlan: add ttl inherit support") Pick them, silencing this build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h' Cc: Alexei Starovoitov Cc: David S. Miller Cc: Eric Leblond Cc: Hangbin Liu Cc: Nikolay Aleksandrov Link: https://lkml.kernel.org/n/tip-ezi5u0mmdqm0wfm0y2y8176r@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/if_link.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/include/uapi/linux/if_link.h b/tools/include/uapi/linux/if_link.h index 68699f654118..cf01b6824244 100644 --- a/tools/include/uapi/linux/if_link.h +++ b/tools/include/uapi/linux/if_link.h @@ -333,6 +333,7 @@ enum { IFLA_BRPORT_BCAST_FLOOD, IFLA_BRPORT_GROUP_FWD_MASK, IFLA_BRPORT_NEIGH_SUPPRESS, + IFLA_BRPORT_ISOLATED, __IFLA_BRPORT_MAX }; #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) @@ -516,6 +517,7 @@ enum { IFLA_VXLAN_COLLECT_METADATA, IFLA_VXLAN_LABEL, IFLA_VXLAN_GPE, + IFLA_VXLAN_TTL_INHERIT, __IFLA_VXLAN_MAX }; #define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) -- cgit v1.2.3 From f568b472815fd6c34fe4cc30dde4572ee300d6c4 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 15 Jun 2018 16:55:32 -0300 Subject: tools include uapi: Synchronize bpf.h with the kernel To pick the rename in: bd3a08aaa9a3 ("bpf: flowlabel in bpf_fib_lookup should be flowinfo") Silencing this build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h' Cc: Adrian Hunter Cc: Alexei Starovoitov Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-zd1sgtbybtjrrt7bqdybu0s0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/bpf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index e0b06784f227..59b19b6a40d7 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -2630,7 +2630,7 @@ struct bpf_fib_lookup { union { /* inputs to lookup */ __u8 tos; /* AF_INET */ - __be32 flowlabel; /* AF_INET6 */ + __be32 flowinfo; /* AF_INET6, flow_label + priority */ /* output: metric of fib result (IPv4/IPv6 only) */ __u32 rt_metric; -- cgit v1.2.3 From c6555c14572aeadf4fe2819abd971c4e7608b926 Mon Sep 17 00:00:00 2001 From: Yonghong Song Date: Sat, 16 Jun 2018 10:47:39 -0700 Subject: perf tools: Fix a clang 7.0 compilation error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Arnaldo reported the perf build failure with latest llvm/clang compiler (7.0). $ make LIBCLANGLLVM=1 -C tools/perf/ CC /tmp/tmp.t53Qo38zci/tests/kmod-path.o util/c++/clang.cpp: In function ‘std::unique_ptr > perf::getBPFObjectFromModule(llvm::Module*)’: util/c++/clang.cpp:150:43: error: no matching function for call to ‘llvm::TargetMachine::addPassesToEmitFile(llvm::legacy::PassManager&, llvm::raw_svector_ostream&, llvm::TargetMachine::CodeGenFileType)’ TargetMachine::CGFT_ObjectFile)) { ^ In file included from util/c++/clang.cpp:25:0: /usr/local/include/llvm/Target/TargetMachine.h:254:16: note: candidate: virtual bool llvm::TargetMachine::addPassesToEmitFile( llvm::legacy::PassManagerBase&, llvm::raw_pwrite_stream&, llvm::raw_pwrite_stream*, llvm::TargetMachine::CodeGenFileType, bool, llvm::MachineModuleInfo*) virtual bool addPassesToEmitFile(PassManagerBase &, raw_pwrite_stream &, ^~~~~~~~~~~~~~~~~~~ /usr/local/include/llvm/Target/TargetMachine.h:254:16: note: candidate expects 6 arguments, 3 provided mv: cannot stat '/tmp/tmp.t53Qo38zci/util/c++/.clang.o.tmp': No such file or directory make[7]: *** [/home/acme/git/perf/tools/build/Makefile.build:101: /tmp/tmp.t53Qo38zci/util/c++/clang.o] Error 1 make[6]: *** [/home/acme/git/perf/tools/build/Makefile.build:139: c++] Error 2 make[5]: *** [/home/acme/git/perf/tools/build/Makefile.build:139: util] Error 2 make[5]: *** Waiting for unfinished jobs.... CC /tmp/tmp.t53Qo38zci/tests/thread-map.o The function addPassesToEmitFile signature changed in llvm 7.0 and such a change caused the failure. This patch fixed the issue with using proper function signatures under different compiler versions. Reported-by: Arnaldo Carvalho de Melo Signed-off-by: Yonghong Song Tested-by: Arnaldo Carvalho de Melo Cc: Alexei Starovoitov Cc: Daniel Borkmann Cc: Jiri Olsa Cc: Martin KaFai Lau Cc: Wang Nan Link: http://lkml.kernel.org/r/20180616174739.1076733-1-yhs@fb.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/c++/clang.cpp | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/tools/perf/util/c++/clang.cpp b/tools/perf/util/c++/clang.cpp index bf31ceab33bd..89512504551b 100644 --- a/tools/perf/util/c++/clang.cpp +++ b/tools/perf/util/c++/clang.cpp @@ -146,8 +146,15 @@ getBPFObjectFromModule(llvm::Module *Module) raw_svector_ostream ostream(*Buffer); legacy::PassManager PM; - if (TargetMachine->addPassesToEmitFile(PM, ostream, - TargetMachine::CGFT_ObjectFile)) { + bool NotAdded; +#if CLANG_VERSION_MAJOR < 7 + NotAdded = TargetMachine->addPassesToEmitFile(PM, ostream, + TargetMachine::CGFT_ObjectFile); +#else + NotAdded = TargetMachine->addPassesToEmitFile(PM, ostream, nullptr, + TargetMachine::CGFT_ObjectFile); +#endif + if (NotAdded) { llvm::errs() << "TargetMachine can't emit a file of this type\n"; return std::unique_ptr>(nullptr);; } -- cgit v1.2.3 From ea23ac73085743a4f1682d6605fe019577c82e1e Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Fri, 15 Jun 2018 12:11:03 +0200 Subject: perf alias: Remove trailing newline when reading sysfs files Remove a trailing newline when reading sysfs file contents such as /sys/devices/cpum_cf/events/TX_NC_TEND. This shows when verbose option -v is used. Output before: tx_nc_tend -> 'cpum_cf'/'event=0x008d '/ Output after: tx_nc_tend -> 'cpum_cf'/'event=0x8d'/ Signed-off-by: Thomas Richter Reviewed-by: Hendrik Brueckner Cc: Heiko Carstens Cc: Jiri Olsa Cc: Martin Schwidefsky Link: http://lkml.kernel.org/r/20180615101105.47047-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/pmu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c index d2fb597c9a8c..2738fc8d200d 100644 --- a/tools/perf/util/pmu.c +++ b/tools/perf/util/pmu.c @@ -303,6 +303,9 @@ static int perf_pmu__new_alias(struct list_head *list, char *dir, char *name, FI buf[ret] = 0; + /* Remove trailing newline from sysfs file */ + rtrim(buf); + return __perf_pmu__new_alias(list, dir, name, NULL, buf, NULL, NULL, NULL, NULL, NULL, NULL); } -- cgit v1.2.3 From 0c24d6fb7bd3578e5b9e4972d01bbe3d087ded33 Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Fri, 15 Jun 2018 12:11:04 +0200 Subject: perf alias: Rebuild alias expression string to make it comparable PMU alias definitions in sysfs files may have spaces, newlines and numbers with leading zeroes. Some alias definitions may also appear in JSON files without spaces, etc. Scan alias definitions and remove leading zeroes, spaces, newlines, etc and rebuild string to make alias->str member comparable. s390 for example has terms specified as event=0x0091 (read from files ..//events/ and terms specified as event=0x91 (read from JSON files). Signed-off-by: Thomas Richter Reviewed-by: Hendrik Brueckner Cc: Heiko Carstens Cc: Jiri Olsa Cc: Martin Schwidefsky Link: http://lkml.kernel.org/r/20180615101105.47047-2-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/pmu.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c index 2738fc8d200d..f321ce97d9ec 100644 --- a/tools/perf/util/pmu.c +++ b/tools/perf/util/pmu.c @@ -241,9 +241,11 @@ static int __perf_pmu__new_alias(struct list_head *list, char *dir, char *name, char *metric_expr, char *metric_name) { + struct parse_events_term *term; struct perf_pmu_alias *alias; int ret; int num; + char newval[256]; alias = malloc(sizeof(*alias)); if (!alias) @@ -262,6 +264,27 @@ static int __perf_pmu__new_alias(struct list_head *list, char *dir, char *name, return ret; } + /* Scan event and remove leading zeroes, spaces, newlines, some + * platforms have terms specified as + * event=0x0091 (read from files ..//events/ + * and terms specified as event=0x91 (read from JSON files). + * + * Rebuild string to make alias->str member comparable. + */ + memset(newval, 0, sizeof(newval)); + ret = 0; + list_for_each_entry(term, &alias->terms, list) { + if (ret) + ret += scnprintf(newval + ret, sizeof(newval) - ret, + ","); + if (term->type_val == PARSE_EVENTS__TERM_TYPE_NUM) + ret += scnprintf(newval + ret, sizeof(newval) - ret, + "%s=%#x", term->config, term->val.num); + else if (term->type_val == PARSE_EVENTS__TERM_TYPE_STR) + ret += scnprintf(newval + ret, sizeof(newval) - ret, + "%s=%s", term->config, term->val.str); + } + alias->name = strdup(name); if (dir) { /* @@ -285,7 +308,7 @@ static int __perf_pmu__new_alias(struct list_head *list, char *dir, char *name, snprintf(alias->unit, sizeof(alias->unit), "%s", unit); } alias->per_pkg = perpkg && sscanf(perpkg, "%d", &num) == 1 && num == 1; - alias->str = strdup(val); + alias->str = strdup(newval); list_add_tail(&alias->list, list); -- cgit v1.2.3 From 6dde6429c5ff5b38d6d40a14a6ee105117e6364d Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Fri, 15 Jun 2018 12:11:05 +0200 Subject: perf stat: Remove duplicate event counting 'perf stat' shows a mismatch in perf stat regarding counter names on s390: Run command: [root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v -- ~/mytesttx 1 >/tmp/111 tx_nc_tend: 1 573146 573146 tx_nc_tend: 1 573146 573146 Performance counter stats for '/root/mytesttx 1': 3 tx_nc_tend 0.001037252 seconds time elapsed [root@s35lp76 perf]# shows transaction counter tx_nc_tend with value 3 but it was triggered only once as seen by the output of mytesttx. When looking up the event name tx_nc_tend the following function sequence is called: parse_events_multi_pmu_add() +--> perf_pmu__scan() being called with NULL argument +--> pmu_read_sysfs() scans directory ../devices/ for all PMUs +--> perf_pmu__find() tries to find a PMU in the global pmu list. +--> pmu_lookup() called to read all file entries when not in global list. pmu_lookup() causes the issue. It calls +---> pmu_aliases() to read all the entries in the PMU directory. On s390 this is named /sys/devices/cpum_cf/events. +--> pmu_aliases_parse() reads all files and creates an alias for each file name. So we end up with first entry created by reading the sysfs file [root@s35lp76 perf]# cat /sys/devices/cpum_cf /events/TX_NC_TEND event=0x008d [root@s35lp76 perf]# Debug output shows this entry tx_nc_tend -> 'cpum_cf'/'event=0x008d '/ After all files in this directory have been read and aliases created this function is called: +--> pmu_add_cpu_aliases() This function looks up the CPU tables created by the json files. With json files for s390 now available all the aliases are added to the PMU alias list a second time. The second entry is added by reading the json file converted by jevent resulting in file pmu-events/pmu-events.c: { .name = "tx_nc_tend", .event = "event=0x8d", .desc = "Unit: cpum_cf Completed TEND \ instructions \ in non-constrained TX mode", .topic = "extended", .long_desc = "A TEND instruction has \ completed in a \ non-constrained \ transactional-execution mode", .pmu = "cpum_cf", }, Debug output shows this entry tx_nc_tend -> 'cpum_cf'/'event=0x8d'/ Function pmu_aliases_parse() and pmu_add_cpu_aliases() both use __perf_pmu__new_alias() to add an alias to the PMU alias list. There is no check if an alias already exist So we end up with 2 entries for tx_nc_tend in the PMU alias list. Having set up the PMU alias list for this PMU now parse_events_multi_add_pmu() reads the complete alias list and adds each alias with parse_events_add_pmu() to the global perfev_list. This causes the alias to be added multiple times to the event list. Fix this by making __perf_pmu__new_alias() to merge alias definitions if an alias is already on the alias list. Also print a debug message when the alias has mismatches in some fields. Output before: [root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v \ -- ~/mytesttx 1 >/tmp/111 tx_nc_tend: 1 551446 551446 Performance counter stats for '/root/mytesttx 1': 3 tx_nc_tend 0.000961134 seconds time elapsed [root@s35lp76 perf]# Output after: [root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v \ -- ~/mytesttx 1 >/tmp/111 tx_nc_tend: 1 551446 551446 Performance counter stats for '/root/mytesttx 1': 1 tx_nc_tend 0.000961134 seconds time elapsed [root@s35lp76 perf]# Signed-off-by: Thomas Richter Reviewed-by: Hendrik Brueckner Reviewed-by: Jiri Olsa Cc: Heiko Carstens Cc: Martin Schwidefsky Link: http://lkml.kernel.org/r/20180615101105.47047-3-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/pmu.c | 71 ++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 70 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c index f321ce97d9ec..3ba6a1742f91 100644 --- a/tools/perf/util/pmu.c +++ b/tools/perf/util/pmu.c @@ -234,6 +234,74 @@ static int perf_pmu__parse_snapshot(struct perf_pmu_alias *alias, return 0; } +static void perf_pmu_assign_str(char *name, const char *field, char **old_str, + char **new_str) +{ + if (!*old_str) + goto set_new; + + if (*new_str) { /* Have new string, check with old */ + if (strcasecmp(*old_str, *new_str)) + pr_debug("alias %s differs in field '%s'\n", + name, field); + zfree(old_str); + } else /* Nothing new --> keep old string */ + return; +set_new: + *old_str = *new_str; + *new_str = NULL; +} + +static void perf_pmu_update_alias(struct perf_pmu_alias *old, + struct perf_pmu_alias *newalias) +{ + perf_pmu_assign_str(old->name, "desc", &old->desc, &newalias->desc); + perf_pmu_assign_str(old->name, "long_desc", &old->long_desc, + &newalias->long_desc); + perf_pmu_assign_str(old->name, "topic", &old->topic, &newalias->topic); + perf_pmu_assign_str(old->name, "metric_expr", &old->metric_expr, + &newalias->metric_expr); + perf_pmu_assign_str(old->name, "metric_name", &old->metric_name, + &newalias->metric_name); + perf_pmu_assign_str(old->name, "value", &old->str, &newalias->str); + old->scale = newalias->scale; + old->per_pkg = newalias->per_pkg; + old->snapshot = newalias->snapshot; + memcpy(old->unit, newalias->unit, sizeof(old->unit)); +} + +/* Delete an alias entry. */ +static void perf_pmu_free_alias(struct perf_pmu_alias *newalias) +{ + zfree(&newalias->name); + zfree(&newalias->desc); + zfree(&newalias->long_desc); + zfree(&newalias->topic); + zfree(&newalias->str); + zfree(&newalias->metric_expr); + zfree(&newalias->metric_name); + parse_events_terms__purge(&newalias->terms); + free(newalias); +} + +/* Merge an alias, search in alias list. If this name is already + * present merge both of them to combine all information. + */ +static bool perf_pmu_merge_alias(struct perf_pmu_alias *newalias, + struct list_head *alist) +{ + struct perf_pmu_alias *a; + + list_for_each_entry(a, alist, list) { + if (!strcasecmp(newalias->name, a->name)) { + perf_pmu_update_alias(a, newalias); + perf_pmu_free_alias(newalias); + return true; + } + } + return false; +} + static int __perf_pmu__new_alias(struct list_head *list, char *dir, char *name, char *desc, char *val, char *long_desc, char *topic, @@ -310,7 +378,8 @@ static int __perf_pmu__new_alias(struct list_head *list, char *dir, char *name, alias->per_pkg = perpkg && sscanf(perpkg, "%d", &num) == 1 && num == 1; alias->str = strdup(newval); - list_add_tail(&alias->list, list); + if (!perf_pmu_merge_alias(alias, list)) + list_add_tail(&alias->list, list); return 0; } -- cgit v1.2.3 From 983107072be1a39cbde67d45cb0059138190e015 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 20 Jun 2018 11:40:36 +0200 Subject: perf bench: Fix numa report output code Currently we can hit following assert when running numa bench: $ perf bench numa mem -p 3 -t 1 -P 512 -s 100 -zZ0cm --thp 1 perf: bench/numa.c:1577: __bench_numa: Assertion `!(!(((wait_stat) & 0x7f) == 0))' failed. The assertion is correct, because we hit the SIGFPE in following line: Thread 2.2 "thread 0/0" received signal SIGFPE, Arithmetic exception. [Switching to Thread 0x7fffd28c6700 (LWP 11750)] 0x000.. in worker_thread (__tdata=0x7.. ) at bench/numa.c:1257 1257 td->speed_gbs = bytes_done / (td->runtime_ns / NSEC_PER_SEC) / 1e9; We don't check if the runtime is actually bigger than 1 second, and thus this might end up with zero division within FPU. Adding the check to prevent this. Signed-off-by: Jiri Olsa Cc: Alexander Shishkin Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20180620094036.17278-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/bench/numa.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/perf/bench/numa.c b/tools/perf/bench/numa.c index 63eb49082774..44195514b19e 100644 --- a/tools/perf/bench/numa.c +++ b/tools/perf/bench/numa.c @@ -1098,7 +1098,7 @@ static void *worker_thread(void *__tdata) u8 *global_data; u8 *process_data; u8 *thread_data; - u64 bytes_done; + u64 bytes_done, secs; long work_done; u32 l; struct rusage rusage; @@ -1254,7 +1254,8 @@ static void *worker_thread(void *__tdata) timersub(&stop, &start0, &diff); td->runtime_ns = diff.tv_sec * NSEC_PER_SEC; td->runtime_ns += diff.tv_usec * NSEC_PER_USEC; - td->speed_gbs = bytes_done / (td->runtime_ns / NSEC_PER_SEC) / 1e9; + secs = td->runtime_ns / NSEC_PER_SEC; + td->speed_gbs = secs ? bytes_done / secs / 1e9 : 0; getrusage(RUSAGE_THREAD, &rusage); td->system_time_ns = rusage.ru_stime.tv_sec * NSEC_PER_SEC; -- cgit v1.2.3 From 10e9cec905f96fdf47f398be70726e2931b376cd Mon Sep 17 00:00:00 2001 From: Ravi Bangoria Date: Mon, 25 Jun 2018 18:12:18 +0530 Subject: perf script: Add missing output fields in a hint A few fields are missing in a perf script -F hint. Add them. Signed-off-by: Ravi Bangoria Cc: Alexander Shishkin Cc: Andi Kleen Cc: David Ahern Cc: David Carrillo-Cisneros Cc: Jin Yao Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20180625124220.6434-2-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-script.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c index a31d7082188e..f3fefbcc4503 100644 --- a/tools/perf/builtin-script.c +++ b/tools/perf/builtin-script.c @@ -3125,8 +3125,9 @@ int cmd_script(int argc, const char **argv) "+field to add and -field to remove." "Valid types: hw,sw,trace,raw,synth. " "Fields: comm,tid,pid,time,cpu,event,trace,ip,sym,dso," - "addr,symoff,period,iregs,uregs,brstack,brstacksym,flags," - "bpf-output,callindent,insn,insnlen,brstackinsn,synth,phys_addr", + "addr,symoff,srcline,period,iregs,uregs,brstack," + "brstacksym,flags,bpf-output,brstackinsn,brstackoff," + "callindent,insn,insnlen,synth,phys_addr,metric,misc", parse_output_fields), OPT_BOOLEAN('a', "all-cpus", &system_wide, "system-wide collection from all CPUs"), -- cgit v1.2.3 From a3af66f51bd0bca72881ead4bf2bd19cb366582b Mon Sep 17 00:00:00 2001 From: Ravi Bangoria Date: Mon, 25 Jun 2018 18:12:19 +0530 Subject: perf script: Fix crash because of missing evsel->priv 'perf script' in piped mode is crashing because evsel->priv is not set properly. Fix it. Before: # perf record -o - -- ls | perf script Segmentation fault (core dumped) # After: # perf record -o - -- ls | perf script ls 2282 1031.731974: 250000 cpu-clock:uhH: 7effe4b3d29e ls 2282 1031.732222: 250000 cpu-clock:uhH: 7effe4b3a650 # Signed-off-by: Ravi Bangoria Tested-by: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Andi Kleen Cc: David Ahern Cc: David Carrillo-Cisneros Cc: Jin Yao Cc: Jiri Olsa Cc: Namhyung Kim Fixes: a14390fde64e ("perf script: Allow creating per-event dump files") Link: http://lkml.kernel.org/r/20180625124220.6434-3-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-script.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c index f3fefbcc4503..ad2ac1300420 100644 --- a/tools/perf/builtin-script.c +++ b/tools/perf/builtin-script.c @@ -1834,6 +1834,7 @@ static int process_attr(struct perf_tool *tool, union perf_event *event, struct perf_evlist *evlist; struct perf_evsel *evsel, *pos; int err; + static struct perf_evsel_script *es; err = perf_event__process_attr(tool, event, pevlist); if (err) @@ -1842,6 +1843,19 @@ static int process_attr(struct perf_tool *tool, union perf_event *event, evlist = *pevlist; evsel = perf_evlist__last(*pevlist); + if (!evsel->priv) { + if (scr->per_event_dump) { + evsel->priv = perf_evsel_script__new(evsel, + scr->session->data); + } else { + es = zalloc(sizeof(*es)); + if (!es) + return -ENOMEM; + es->fp = stdout; + evsel->priv = es; + } + } + if (evsel->attr.type >= PERF_TYPE_MAX && evsel->attr.type != PERF_TYPE_SYNTH) return 0; -- cgit v1.2.3 From 92ead7ee30c80f8852d28735cbcb9d79bc85f715 Mon Sep 17 00:00:00 2001 From: Ravi Bangoria Date: Mon, 25 Jun 2018 18:12:20 +0530 Subject: perf tools: Fix crash caused by accessing feat_ops[HEADER_LAST_FEATURE] perf_event__process_feature() accesses feat_ops[HEADER_LAST_FEATURE] which is not defined and thus perf is crashing. HEADER_LAST_FEATURE is used as an end marker for the perf report but it's unused for perf script/annotate. Ignore HEADER_LAST_FEATURE for perf script/annotate, just like it is done in 'perf report'. Before: # perf record -o - ls | perf script Segmentation fault (core dumped) # After: # perf record -o - ls | perf script Segmentation fault (core dumped) ls 7031 4392.099856: 250000 cpu-clock:uhH: 7f5e0ce7cd60 ls 7031 4392.100355: 250000 cpu-clock:uhH: 7f5e0c706ef7 # Signed-off-by: Ravi Bangoria Cc: Alexander Shishkin Cc: Andi Kleen Cc: David Ahern Cc: David Carrillo-Cisneros Cc: Jin Yao Cc: Jiri Olsa Cc: Namhyung Kim Fixes: 57b5de463925 ("perf report: Support forced leader feature in pipe mode") Link: http://lkml.kernel.org/r/20180625124220.6434-4-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-annotate.c | 11 ++++++++++- tools/perf/builtin-report.c | 3 ++- tools/perf/builtin-script.c | 11 ++++++++++- tools/perf/util/header.c | 2 +- 4 files changed, 23 insertions(+), 4 deletions(-) diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c index 5eb22cc56363..8180319285af 100644 --- a/tools/perf/builtin-annotate.c +++ b/tools/perf/builtin-annotate.c @@ -283,6 +283,15 @@ out_put: return ret; } +static int process_feature_event(struct perf_tool *tool, + union perf_event *event, + struct perf_session *session) +{ + if (event->feat.feat_id < HEADER_LAST_FEATURE) + return perf_event__process_feature(tool, event, session); + return 0; +} + static int hist_entry__tty_annotate(struct hist_entry *he, struct perf_evsel *evsel, struct perf_annotate *ann) @@ -471,7 +480,7 @@ int cmd_annotate(int argc, const char **argv) .attr = perf_event__process_attr, .build_id = perf_event__process_build_id, .tracing_data = perf_event__process_tracing_data, - .feature = perf_event__process_feature, + .feature = process_feature_event, .ordered_events = true, .ordering_requires_timestamps = true, }, diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index cdb5b6949832..c04dc7b53797 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -217,7 +217,8 @@ static int process_feature_event(struct perf_tool *tool, } /* - * All features are received, we can force the + * (feat_id = HEADER_LAST_FEATURE) is the end marker which + * means all features are received, now we can force the * group if needed. */ setup_forced_leader(rep, session->evlist); diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c index ad2ac1300420..568ddfac3213 100644 --- a/tools/perf/builtin-script.c +++ b/tools/perf/builtin-script.c @@ -3044,6 +3044,15 @@ int process_cpu_map_event(struct perf_tool *tool __maybe_unused, return set_maps(script); } +static int process_feature_event(struct perf_tool *tool, + union perf_event *event, + struct perf_session *session) +{ + if (event->feat.feat_id < HEADER_LAST_FEATURE) + return perf_event__process_feature(tool, event, session); + return 0; +} + #ifdef HAVE_AUXTRACE_SUPPORT static int perf_script__process_auxtrace_info(struct perf_tool *tool, union perf_event *event, @@ -3088,7 +3097,7 @@ int cmd_script(int argc, const char **argv) .attr = process_attr, .event_update = perf_event__process_event_update, .tracing_data = perf_event__process_tracing_data, - .feature = perf_event__process_feature, + .feature = process_feature_event, .build_id = perf_event__process_build_id, .id_index = perf_event__process_id_index, .auxtrace_info = perf_script__process_auxtrace_info, diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index 59fcc790c865..653ff65aa2c3 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -3464,7 +3464,7 @@ int perf_event__process_feature(struct perf_tool *tool, pr_warning("invalid record type %d in pipe-mode\n", type); return 0; } - if (feat == HEADER_RESERVED || feat > HEADER_LAST_FEATURE) { + if (feat == HEADER_RESERVED || feat >= HEADER_LAST_FEATURE) { pr_warning("invalid record type %d in pipe-mode\n", type); return -1; } -- cgit v1.2.3 From b65c32ec5a942ab3ada93a048089a938918aba7f Mon Sep 17 00:00:00 2001 From: "Maciej S. Szmigiero" Date: Sat, 19 May 2018 14:23:54 +0200 Subject: X.509: unpack RSA signatureValue field from BIT STRING The signatureValue field of a X.509 certificate is encoded as a BIT STRING. For RSA signatures this BIT STRING is of so-called primitive subtype, which contains a u8 prefix indicating a count of unused bits in the encoding. We have to strip this prefix from signature data, just as we already do for key data in x509_extract_key_data() function. This wasn't noticed earlier because this prefix byte is zero for RSA key sizes divisible by 8. Since BIT STRING is a big-endian encoding adding zero prefixes has no bearing on its value. The signature length, however was incorrect, which is a problem for RSA implementations that need it to be exactly correct (like AMD CCP). Signed-off-by: Maciej S. Szmigiero Fixes: c26fd69fa009 ("X.509: Add a crypto key parser for binary (DER) X.509 certificates") Cc: stable@vger.kernel.org Signed-off-by: James Morris --- crypto/asymmetric_keys/x509_cert_parser.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/crypto/asymmetric_keys/x509_cert_parser.c b/crypto/asymmetric_keys/x509_cert_parser.c index 7d81e6bb461a..b6cabac4b62b 100644 --- a/crypto/asymmetric_keys/x509_cert_parser.c +++ b/crypto/asymmetric_keys/x509_cert_parser.c @@ -249,6 +249,15 @@ int x509_note_signature(void *context, size_t hdrlen, return -EINVAL; } + if (strcmp(ctx->cert->sig->pkey_algo, "rsa") == 0) { + /* Discard the BIT STRING metadata */ + if (vlen < 1 || *(const u8 *)value != 0) + return -EBADMSG; + + value++; + vlen--; + } + ctx->cert->raw_sig = value; ctx->cert->raw_sig_size = vlen; return 0; -- cgit v1.2.3 From 7b72717a20bba8bdd01b14c0460be7d15061cd6b Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Thu, 21 Jun 2018 07:43:21 -0700 Subject: iw_cxgb4: correctly enforce the max reg_mr depth The code was mistakenly using the length of the page array memory instead of the depth of the page array. This would cause MR creation to fail in some cases. Fixes: 8376b86de7d3 ("iw_cxgb4: Support the new memory registration API") Cc: stable@vger.kernel.org Signed-off-by: Steve Wise Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/cxgb4/mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c index 1445918e3239..7b76e6f81aeb 100644 --- a/drivers/infiniband/hw/cxgb4/mem.c +++ b/drivers/infiniband/hw/cxgb4/mem.c @@ -774,7 +774,7 @@ static int c4iw_set_page(struct ib_mr *ibmr, u64 addr) { struct c4iw_mr *mhp = to_c4iw_mr(ibmr); - if (unlikely(mhp->mpl_len == mhp->max_mpl_len)) + if (unlikely(mhp->mpl_len == mhp->attr.pbl_size)) return -ENOMEM; mhp->mpl[mhp->mpl_len++] = addr; -- cgit v1.2.3 From 940efcc8889f0d15567eb07fc9fd69b06e366aa5 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 24 Jun 2018 11:23:42 +0300 Subject: RDMA/uverbs: Protect from attempts to create flows on unsupported QP Flows can be created on UD and RAW_PACKET QP types. Attempts to provide other QP types as an input causes to various unpredictable failures. The reason is that in order to support all various types (e.g. XRC), we are supposed to use real_qp handle and not qp handle and expect to driver/FW to fail such (XRC) flows. The simpler and safer variant is to ban all QP types except UD and RAW_PACKET, instead of relying on driver/FW. Cc: # 3.11 Fixes: 436f2ad05a0b ("IB/core: Export ib_create/destroy_flow through uverbs") Cc: syzkaller Reported-by: Noa Osherovich Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/uverbs_cmd.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index 3e90b6a1d9d2..89c4ce2da78b 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -3559,6 +3559,11 @@ int ib_uverbs_ex_create_flow(struct ib_uverbs_file *file, goto err_uobj; } + if (qp->qp_type != IB_QPT_UD && qp->qp_type != IB_QPT_RAW_PACKET) { + err = -EINVAL; + goto err_put; + } + flow_attr = kzalloc(struct_size(flow_attr, flows, cmd.flow_attr.num_of_specs), GFP_KERNEL); if (!flow_attr) { -- cgit v1.2.3 From 4fae7f170416f970e5655f7e945ce69286b1c4ff Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 24 Jun 2018 11:23:53 +0300 Subject: RDMA/uverbs: Fix slab-out-of-bounds in ib_uverbs_ex_create_flow The check of cmd.flow_attr.size should check into account the size of the reserved field (2 bytes), otherwise user can provide a size which will cause a slab-out-of-bounds warning below. ================================================================== BUG: KASAN: slab-out-of-bounds in ib_uverbs_ex_create_flow+0x1740/0x1d00 Read of size 2 at addr ffff880068dff1a6 by task syz-executor775/269 CPU: 0 PID: 269 Comm: syz-executor775 Not tainted 4.18.0-rc1+ #245 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xef/0x17e print_address_description+0x83/0x3b0 kasan_report+0x18d/0x4d0 ib_uverbs_ex_create_flow+0x1740/0x1d00 ib_uverbs_write+0x923/0x1010 __vfs_write+0x10d/0x720 vfs_write+0x1b0/0x550 ksys_write+0xc6/0x1a0 do_syscall_64+0xa7/0x590 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x433899 Code: fd ff 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 91 fd ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc2724db58 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000020006880 RCX: 0000000000433899 RDX: 00000000000000e0 RSI: 0000000020002480 RDI: 0000000000000003 RBP: 00000000006d7018 R08: 00000000004002f8 R09: 00000000004002f8 R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000 R13: 000000000040cd20 R14: 000000000040cdb0 R15: 0000000000000006 Allocated by task 269: kasan_kmalloc+0xa0/0xd0 __kmalloc+0x1a9/0x510 ib_uverbs_ex_create_flow+0x26c/0x1d00 ib_uverbs_write+0x923/0x1010 __vfs_write+0x10d/0x720 vfs_write+0x1b0/0x550 ksys_write+0xc6/0x1a0 do_syscall_64+0xa7/0x590 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 0: __kasan_slab_free+0x12e/0x180 kfree+0x159/0x630 detach_buf+0x559/0x7a0 virtqueue_get_buf_ctx+0x3cc/0xab0 virtblk_done+0x1eb/0x3d0 vring_interrupt+0x16d/0x2b0 __handle_irq_event_percpu+0x10a/0x980 handle_irq_event_percpu+0x77/0x190 handle_irq_event+0xc6/0x1a0 handle_edge_irq+0x211/0xd80 handle_irq+0x3d/0x60 do_IRQ+0x9b/0x220 The buggy address belongs to the object at ffff880068dff180 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 38 bytes inside of 64-byte region [ffff880068dff180, ffff880068dff1c0) The buggy address belongs to the page: page:ffffea0001a37fc0 count:1 mapcount:0 mapping:ffff88006c401780 index:0x0 flags: 0x4000000000000100(slab) raw: 4000000000000100 ffffea0001a31100 0000001100000011 ffff88006c401780 raw: 0000000000000000 00000000802a002a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880068dff080: fb fb fb fb fc fc fc fc fb fb fb fb fb fb fb fb ffff880068dff100: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc >ffff880068dff180: 00 00 00 00 07 fc fc fc fc fc fc fc fb fb fb fb ^ ffff880068dff200: fb fb fb fb fc fc fc fc 00 00 00 00 00 00 fc fc ffff880068dff280: fc fc fc fc 00 00 00 00 00 00 00 00 fc fc fc fc ================================================================== Cc: # 3.12 Fixes: f88482743872 ("IB/core: clarify overflow/underflow checks on ib_create/destroy_flow") Cc: syzkaller Reported-by: Noa Osherovich Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/uverbs_cmd.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index 89c4ce2da78b..87ffeebc0b28 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -3488,8 +3488,8 @@ int ib_uverbs_ex_create_flow(struct ib_uverbs_file *file, struct ib_flow_attr *flow_attr; struct ib_qp *qp; struct ib_uflow_resources *uflow_res; + struct ib_uverbs_flow_spec_hdr *kern_spec; int err = 0; - void *kern_spec; void *ib_spec; int i; @@ -3538,8 +3538,8 @@ int ib_uverbs_ex_create_flow(struct ib_uverbs_file *file, if (!kern_flow_attr) return -ENOMEM; - memcpy(kern_flow_attr, &cmd.flow_attr, sizeof(*kern_flow_attr)); - err = ib_copy_from_udata(kern_flow_attr + 1, ucore, + *kern_flow_attr = cmd.flow_attr; + err = ib_copy_from_udata(&kern_flow_attr->flow_specs, ucore, cmd.flow_attr.size); if (err) goto err_free_attr; @@ -3583,21 +3583,22 @@ int ib_uverbs_ex_create_flow(struct ib_uverbs_file *file, flow_attr->flags = kern_flow_attr->flags; flow_attr->size = sizeof(*flow_attr); - kern_spec = kern_flow_attr + 1; + kern_spec = kern_flow_attr->flow_specs; ib_spec = flow_attr + 1; for (i = 0; i < flow_attr->num_of_specs && - cmd.flow_attr.size > offsetof(struct ib_uverbs_flow_spec, reserved) && - cmd.flow_attr.size >= - ((struct ib_uverbs_flow_spec *)kern_spec)->size; i++) { - err = kern_spec_to_ib_spec(file->ucontext, kern_spec, ib_spec, - uflow_res); + cmd.flow_attr.size > sizeof(*kern_spec) && + cmd.flow_attr.size >= kern_spec->size; + i++) { + err = kern_spec_to_ib_spec( + file->ucontext, (struct ib_uverbs_flow_spec *)kern_spec, + ib_spec, uflow_res); if (err) goto err_free; flow_attr->size += ((union ib_flow_spec *) ib_spec)->size; - cmd.flow_attr.size -= ((struct ib_uverbs_flow_spec *)kern_spec)->size; - kern_spec += ((struct ib_uverbs_flow_spec *) kern_spec)->size; + cmd.flow_attr.size -= kern_spec->size; + kern_spec = ((void *)kern_spec) + kern_spec->size; ib_spec += ((union ib_flow_spec *) ib_spec)->size; } if (cmd.flow_attr.size || (i != flow_attr->num_of_specs)) { -- cgit v1.2.3 From 0613de37373bbbc747d434f643620472bd13303b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 2 Jun 2018 10:52:56 +0300 Subject: clk: davinci: cfgchip: testing the wrong variable There is a copy and paste bug here. We should be testing "usb1" instead of "usb0". Fixes: 58e1e2d2cd89 ("clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks") Signed-off-by: Dan Carpenter Signed-off-by: David Lechner --- drivers/clk/davinci/da8xx-cfgchip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/davinci/da8xx-cfgchip.c b/drivers/clk/davinci/da8xx-cfgchip.c index aae62a5b8734..d1bbee19ed0f 100644 --- a/drivers/clk/davinci/da8xx-cfgchip.c +++ b/drivers/clk/davinci/da8xx-cfgchip.c @@ -672,7 +672,7 @@ static int of_da8xx_usb_phy_clk_init(struct device *dev, struct regmap *regmap) usb1 = da8xx_cfgchip_register_usb1_clk48(dev, regmap); if (IS_ERR(usb1)) { - if (PTR_ERR(usb0) == -EPROBE_DEFER) + if (PTR_ERR(usb1) == -EPROBE_DEFER) return -EPROBE_DEFER; dev_warn(dev, "Failed to register usb1_clk48 (%ld)\n", -- cgit v1.2.3 From 176cbf5f62e7a0aa0180af4826da9e7da1359988 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 25 Jun 2018 19:25:50 +0200 Subject: clk: davinci: fix a typo (which leads to build failures) This should have been DM365, not DM356. Fixes: 4eff0bebf4ed5 ("clk: davinci: Fix link errors when not all SoCs are enabled") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: David Lechner --- drivers/clk/davinci/psc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/davinci/psc.h b/drivers/clk/davinci/psc.h index 6a42529d31a9..cc5614567a70 100644 --- a/drivers/clk/davinci/psc.h +++ b/drivers/clk/davinci/psc.h @@ -107,7 +107,7 @@ extern const struct davinci_psc_init_data of_da850_psc1_init_data; #ifdef CONFIG_ARCH_DAVINCI_DM355 extern const struct davinci_psc_init_data dm355_psc_init_data; #endif -#ifdef CONFIG_ARCH_DAVINCI_DM356 +#ifdef CONFIG_ARCH_DAVINCI_DM365 extern const struct davinci_psc_init_data dm365_psc_init_data; #endif #ifdef CONFIG_ARCH_DAVINCI_DM644x -- cgit v1.2.3 From 90f26cc6bb90b35040f4da0347f480ea9df6e2fc Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 6 Jun 2018 09:43:27 +0800 Subject: usb: chipidea: host: fix disconnection detect issue The commit 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd") delete the assignment for hcd->usb_phy, it causes usb_phy_notify_connect{disconnect) are not called, the USB PHY driver is not notified of hot plug event, then the disconnection will not be detected by hardware. Fixes: 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd") Acked-by: Martin Blumenstingl Reported-by: Mats Karrman Tested-by: Mats Karrman Signed-off-by: Peter Chen --- drivers/usb/chipidea/host.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index af45aa3222b5..4638d9b066be 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -124,8 +124,11 @@ static int host_start(struct ci_hdrc *ci) hcd->power_budget = ci->platdata->power_budget; hcd->tpl_support = ci->platdata->tpl_support; - if (ci->phy || ci->usb_phy) + if (ci->phy || ci->usb_phy) { hcd->skip_phy_initialization = 1; + if (ci->usb_phy) + hcd->usb_phy = ci->usb_phy; + } ehci = hcd_to_ehci(hcd); ehci->caps = ci->hw_bank.cap; -- cgit v1.2.3 From 0ea3fa15b12739c5455cd5850ada4e9948171213 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 25 May 2018 18:08:24 +0200 Subject: qcom: cmd-db: enforce CONFIG_OF_RESERVED_MEM dependency Without CONFIG_OF_RESERVED_MEM, gcc sees that the global cmd_db_header variable is never initialized, and through code optimization concludes that a lot of other code cannot possibly work after that: drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_addr': drivers/soc/qcom/cmd-db.c:197:21: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] return ret < 0 ? 0 : le32_to_cpu(ent.addr); drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data': drivers/soc/qcom/cmd-db.c:224:10: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] ent_len = le16_to_cpu(ent.len); drivers/soc/qcom/cmd-db.c:115:6: error: 'rsc_hdr.data_offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] u16 offset = le16_to_cpu(hdr->data_offset); ^~~~~~ drivers/soc/qcom/cmd-db.c:116:6: error: 'ent.offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] u16 loffset = le16_to_cpu(ent->offset); ^~~~~~~ drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data_len': drivers/soc/qcom/cmd-db.c:250:38: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] return ret < 0 ? 0 : le16_to_cpu(ent.len); ^ drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_slave_id': drivers/soc/qcom/cmd-db.c:272:7: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] Using a hard CONFIG_OF_RESERVED_MEM dependency avoids this warning, and we can remove the CONFIG_OF dependency. Signed-off-by: Arnd Bergmann Reviewed-by: Bjorn Andersson Signed-off-by: Andy Gross --- drivers/soc/qcom/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 9dc02f390ba3..5856e792d09c 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -5,7 +5,8 @@ menu "Qualcomm SoC drivers" config QCOM_COMMAND_DB bool "Qualcomm Command DB" - depends on (ARCH_QCOM && OF) || COMPILE_TEST + depends on ARCH_QCOM || COMPILE_TEST + depends on OF_RESERVED_MEM help Command DB queries shared memory by key string for shared system resources. Platform drivers that require to set state of a shared -- cgit v1.2.3 From 2203d8a76ea3b962559acfe3bb80eddfdfbc9cee Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Mon, 25 Jun 2018 08:44:51 +0200 Subject: sample/mdev/mbochs: remove mbochs_kmap_atomic_dmabuf Atomic mapping interface for dmabufs will be removed. Signed-off-by: Gerd Hoffmann Signed-off-by: Alex Williamson --- samples/vfio-mdev/mbochs.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/samples/vfio-mdev/mbochs.c b/samples/vfio-mdev/mbochs.c index 2960e26c6ea4..aa25cda21d22 100644 --- a/samples/vfio-mdev/mbochs.c +++ b/samples/vfio-mdev/mbochs.c @@ -803,15 +803,6 @@ static void mbochs_release_dmabuf(struct dma_buf *buf) mutex_unlock(&mdev_state->ops_lock); } -static void *mbochs_kmap_atomic_dmabuf(struct dma_buf *buf, - unsigned long page_num) -{ - struct mbochs_dmabuf *dmabuf = buf->priv; - struct page *page = dmabuf->pages[page_num]; - - return kmap_atomic(page); -} - static void *mbochs_kmap_dmabuf(struct dma_buf *buf, unsigned long page_num) { struct mbochs_dmabuf *dmabuf = buf->priv; @@ -824,7 +815,6 @@ static struct dma_buf_ops mbochs_dmabuf_ops = { .map_dma_buf = mbochs_map_dmabuf, .unmap_dma_buf = mbochs_unmap_dmabuf, .release = mbochs_release_dmabuf, - .map_atomic = mbochs_kmap_atomic_dmabuf, .map = mbochs_kmap_dmabuf, .mmap = mbochs_mmap_dmabuf, }; -- cgit v1.2.3 From 7733e05b34f5d855c5590d816b41ddfee972d188 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Mon, 25 Jun 2018 08:44:52 +0200 Subject: sample/mdev/mbochs: add mbochs_kunmap_dmabuf There is no default implementation for dma_buf_ops->unmap. So add a function unmapping the page, otherwise we'll leak them. Signed-off-by: Gerd Hoffmann Signed-off-by: Alex Williamson --- samples/vfio-mdev/mbochs.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/samples/vfio-mdev/mbochs.c b/samples/vfio-mdev/mbochs.c index aa25cda21d22..85ac6037696f 100644 --- a/samples/vfio-mdev/mbochs.c +++ b/samples/vfio-mdev/mbochs.c @@ -811,11 +811,18 @@ static void *mbochs_kmap_dmabuf(struct dma_buf *buf, unsigned long page_num) return kmap(page); } +static void mbochs_kunmap_dmabuf(struct dma_buf *buf, unsigned long page_num, + void *vaddr) +{ + kunmap(vaddr); +} + static struct dma_buf_ops mbochs_dmabuf_ops = { .map_dma_buf = mbochs_map_dmabuf, .unmap_dma_buf = mbochs_unmap_dmabuf, .release = mbochs_release_dmabuf, .map = mbochs_kmap_dmabuf, + .unmap = mbochs_kunmap_dmabuf, .mmap = mbochs_mmap_dmabuf, }; -- cgit v1.2.3 From 32fdbd90cc03f01d452138bab4d8a120873d6acf Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 26 Jun 2018 08:43:14 +0200 Subject: tools/headers: Pick up latest kernel ABIs Sync KVM ABI additions and x86 CPU features additions - neither of which has any impact on the tooling build. Cc: Arnaldo Carvalho de Melo Cc: Peter Zijlstra Cc: Namhyung Kim Cc: Jiri Olsa Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar --- tools/arch/arm/include/uapi/asm/kvm.h | 1 + tools/arch/arm64/include/uapi/asm/kvm.h | 1 + tools/arch/powerpc/include/uapi/asm/kvm.h | 1 + tools/arch/x86/include/asm/cpufeatures.h | 2 ++ tools/include/uapi/linux/kvm.h | 1 + 5 files changed, 6 insertions(+) diff --git a/tools/arch/arm/include/uapi/asm/kvm.h b/tools/arch/arm/include/uapi/asm/kvm.h index caae4843cb70..16e006f708ca 100644 --- a/tools/arch/arm/include/uapi/asm/kvm.h +++ b/tools/arch/arm/include/uapi/asm/kvm.h @@ -91,6 +91,7 @@ struct kvm_regs { #define KVM_VGIC_V3_ADDR_TYPE_DIST 2 #define KVM_VGIC_V3_ADDR_TYPE_REDIST 3 #define KVM_VGIC_ITS_ADDR_TYPE 4 +#define KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION 5 #define KVM_VGIC_V3_DIST_SIZE SZ_64K #define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K) diff --git a/tools/arch/arm64/include/uapi/asm/kvm.h b/tools/arch/arm64/include/uapi/asm/kvm.h index 04b3256f8e6d..4e76630dd655 100644 --- a/tools/arch/arm64/include/uapi/asm/kvm.h +++ b/tools/arch/arm64/include/uapi/asm/kvm.h @@ -91,6 +91,7 @@ struct kvm_regs { #define KVM_VGIC_V3_ADDR_TYPE_DIST 2 #define KVM_VGIC_V3_ADDR_TYPE_REDIST 3 #define KVM_VGIC_ITS_ADDR_TYPE 4 +#define KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION 5 #define KVM_VGIC_V3_DIST_SIZE SZ_64K #define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K) diff --git a/tools/arch/powerpc/include/uapi/asm/kvm.h b/tools/arch/powerpc/include/uapi/asm/kvm.h index 833ed9a16adf..1b32b56a03d3 100644 --- a/tools/arch/powerpc/include/uapi/asm/kvm.h +++ b/tools/arch/powerpc/include/uapi/asm/kvm.h @@ -633,6 +633,7 @@ struct kvm_ppc_cpu_char { #define KVM_REG_PPC_PSSCR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbd) #define KVM_REG_PPC_DEC_EXPIRY (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbe) +#define KVM_REG_PPC_ONLINE (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xbf) /* Transactional Memory checkpointed state: * This is all GPRs, all VSX regs and a subset of SPRs diff --git a/tools/arch/x86/include/asm/cpufeatures.h b/tools/arch/x86/include/asm/cpufeatures.h index fb00a2fca990..5701f5cecd31 100644 --- a/tools/arch/x86/include/asm/cpufeatures.h +++ b/tools/arch/x86/include/asm/cpufeatures.h @@ -282,7 +282,9 @@ #define X86_FEATURE_AMD_IBPB (13*32+12) /* "" Indirect Branch Prediction Barrier */ #define X86_FEATURE_AMD_IBRS (13*32+14) /* "" Indirect Branch Restricted Speculation */ #define X86_FEATURE_AMD_STIBP (13*32+15) /* "" Single Thread Indirect Branch Predictors */ +#define X86_FEATURE_AMD_SSBD (13*32+24) /* "" Speculative Store Bypass Disable */ #define X86_FEATURE_VIRT_SSBD (13*32+25) /* Virtualized Speculative Store Bypass Disable */ +#define X86_FEATURE_AMD_SSB_NO (13*32+26) /* "" Speculative Store Bypass is fixed in hardware. */ /* Thermal and Power Management Leaf, CPUID level 0x00000006 (EAX), word 14 */ #define X86_FEATURE_DTHERM (14*32+ 0) /* Digital Thermal Sensor */ diff --git a/tools/include/uapi/linux/kvm.h b/tools/include/uapi/linux/kvm.h index 39e364c70caf..b6270a3b38e9 100644 --- a/tools/include/uapi/linux/kvm.h +++ b/tools/include/uapi/linux/kvm.h @@ -948,6 +948,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_S390_BPB 152 #define KVM_CAP_GET_MSR_FEATURES 153 #define KVM_CAP_HYPERV_EVENTFD 154 +#define KVM_CAP_HYPERV_TLBFLUSH 155 #ifdef KVM_CAP_IRQ_ROUTING -- cgit v1.2.3 From 4188f063e3694ccbf2a2044cf17cc325f91e458f Mon Sep 17 00:00:00 2001 From: Dmitry Vyukov Date: Mon, 25 Jun 2018 14:38:08 +0200 Subject: x86/mm: Get rid of KERN_CONT in show_fault_oops() KERN_CONT leads to split lines in kernel output and complicates useful changes to printk like printing context before each line. Only acceptable use of continuations is basically boot-time testing. Get rid of it. Signed-off-by: Dmitry Vyukov Reviewed-by: Sergey Senozhatsky Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20180625123808.227417-1-dvyukov@gmail.com [ Removed unnecessary parentheses and prettified the printk statement. ] Signed-off-by: Ingo Molnar --- arch/x86/mm/fault.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 9a84a0d08727..ee85766e6329 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -671,13 +671,9 @@ show_fault_oops(struct pt_regs *regs, unsigned long error_code, printk(smep_warning, from_kuid(&init_user_ns, current_uid())); } - printk(KERN_ALERT "BUG: unable to handle kernel "); - if (address < PAGE_SIZE) - printk(KERN_CONT "NULL pointer dereference"); - else - printk(KERN_CONT "paging request"); - - printk(KERN_CONT " at %px\n", (void *) address); + pr_alert("BUG: unable to handle kernel %s at %px\n", + address < PAGE_SIZE ? "NULL pointer dereference" : "paging request", + (void *)address); dump_pagetable(address); } -- cgit v1.2.3 From 236f0cd286b67291796362feeac4f342900cfa82 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 25 Jun 2018 04:21:59 -0600 Subject: x86/entry/32: Add explicit 'l' instruction suffix Omitting suffixes from instructions in AT&T mode is bad practice when operand size cannot be determined by the assembler from register operands, and is likely going to be warned about by upstream GAS in the future (mine does already). Add the single missing 'l' suffix here. Signed-off-by: Jan Beulich Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Andy Lutomirski Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/5B30C24702000078001CD6A6@prv1-mh.provo.novell.com Signed-off-by: Ingo Molnar --- arch/x86/entry/entry_32.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S index 2582881d19ce..c371bfee137a 100644 --- a/arch/x86/entry/entry_32.S +++ b/arch/x86/entry/entry_32.S @@ -477,7 +477,7 @@ ENTRY(entry_SYSENTER_32) * whereas POPF does not.) */ addl $PT_EFLAGS-PT_DS, %esp /* point esp at pt_regs->flags */ - btr $X86_EFLAGS_IF_BIT, (%esp) + btrl $X86_EFLAGS_IF_BIT, (%esp) popfl /* -- cgit v1.2.3 From 0e311d237d7f3022b7dafb639b42541bfb42fe94 Mon Sep 17 00:00:00 2001 From: Andrey Ryabinin Date: Mon, 25 Jun 2018 13:24:27 +0300 Subject: x86/mm: Don't free P4D table when it is folded at runtime When the P4D page table layer is folded at runtime, the p4d_free() should do nothing, the same as in . It seems this bug should cause double-free in efi_call_phys_epilog(), but I don't know how to trigger that code path, so I can't confirm that by testing. Signed-off-by: Andrey Ryabinin Reviewed-by: Kirill A. Shutemov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: stable@vger.kernel.org # 4.17 Fixes: 98219dda2ab5 ("x86/mm: Fold p4d page table layer at runtime") Link: http://lkml.kernel.org/r/20180625102427.15015-1-aryabinin@virtuozzo.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/pgalloc.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h index ada6410fd2ec..fbd578daa66e 100644 --- a/arch/x86/include/asm/pgalloc.h +++ b/arch/x86/include/asm/pgalloc.h @@ -184,6 +184,9 @@ static inline p4d_t *p4d_alloc_one(struct mm_struct *mm, unsigned long addr) static inline void p4d_free(struct mm_struct *mm, p4d_t *p4d) { + if (!pgtable_l5_enabled()) + return; + BUG_ON((unsigned long)p4d & (PAGE_SIZE-1)); free_page((unsigned long)p4d); } -- cgit v1.2.3 From 01a9e9493fb3f65c07077d59cf8ba8b6d2e0463e Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Mon, 11 Jun 2018 18:53:35 +0200 Subject: drm/meson: Fix an un-handled error path in 'meson_drv_bind_master()' If 'platform_get_resource_byname()' fails, we should release some resources before leaving, as already done in the other error handling path of the function. Fixes: acaa3f13b8dd ("drm/meson: Fix potential NULL dereference in meson_drv_bind_master()") Signed-off-by: Christophe JAILLET Acked-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20180611165335.24542-1-christophe.jaillet@wanadoo.fr --- drivers/gpu/drm/meson/meson_drv.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c index 32b1a6cdecfc..d3443125e661 100644 --- a/drivers/gpu/drm/meson/meson_drv.c +++ b/drivers/gpu/drm/meson/meson_drv.c @@ -197,8 +197,10 @@ static int meson_drv_bind_master(struct device *dev, bool has_components) priv->io_base = regs; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hhi"); - if (!res) - return -EINVAL; + if (!res) { + ret = -EINVAL; + goto free_drm; + } /* Simply ioremap since it may be a shared register zone */ regs = devm_ioremap(dev, res->start, resource_size(res)); if (!regs) { @@ -215,8 +217,10 @@ static int meson_drv_bind_master(struct device *dev, bool has_components) } res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmc"); - if (!res) - return -EINVAL; + if (!res) { + ret = -EINVAL; + goto free_drm; + } /* Simply ioremap since it may be a shared register zone */ regs = devm_ioremap(dev, res->start, resource_size(res)); if (!regs) { -- cgit v1.2.3 From 0ee1f4734967af8321ecebaf9c74221ace34f2d5 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 25 Jun 2018 09:26:27 +0200 Subject: r8152: napi hangup fix after disconnect When unplugging an r8152 adapter while the interface is UP, the NIC becomes unusable. usb->disconnect (aka rtl8152_disconnect) deletes napi. Then, rtl8152_disconnect calls unregister_netdev and that invokes netdev->ndo_stop (aka rtl8152_close). rtl8152_close tries to napi_disable, but the napi is already deleted by disconnect above. So the first while loop in napi_disable never finishes. This results in complete deadlock of the network layer as there is rtnl_mutex held by unregister_netdev. So avoid the call to napi_disable in rtl8152_close when the device is already gone. The other calls to usb_kill_urb, cancel_delayed_work_sync, netif_stop_queue etc. seem to be fine. The urb and netdev is not destroyed yet. Signed-off-by: Jiri Slaby Cc: linux-usb@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 86f7196f9d91..2a58607a6aea 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3962,7 +3962,8 @@ static int rtl8152_close(struct net_device *netdev) #ifdef CONFIG_PM_SLEEP unregister_pm_notifier(&tp->pm_notifier); #endif - napi_disable(&tp->napi); + if (!test_bit(RTL8152_UNPLUG, &tp->flags)) + napi_disable(&tp->napi); clear_bit(WORK_ENABLE, &tp->flags); usb_kill_urb(tp->intr_urb); cancel_delayed_work_sync(&tp->schedule); -- cgit v1.2.3 From fdb5c4531c1e0e50e609df83f736b6f3a02896e2 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Tue, 19 Jun 2018 00:04:24 +0100 Subject: bpf: fix attach type BPF_LIRC_MODE2 dependency wrt CONFIG_CGROUP_BPF If the kernel is compiled with CONFIG_CGROUP_BPF not enabled, it is not possible to attach, detach or query IR BPF programs to /dev/lircN devices, making them impossible to use. For embedded devices, it should be possible to use IR decoding without cgroups or CONFIG_CGROUP_BPF enabled. This change requires some refactoring, since bpf_prog_{attach,detach,query} functions are now always compiled, but their code paths for cgroups need moving out. Rather than a #ifdef CONFIG_CGROUP_BPF in kernel/bpf/syscall.c, moving them to kernel/bpf/cgroup.c and kernel/bpf/sockmap.c does not require #ifdefs since that is already conditionally compiled. Fixes: f4364dcfc86d ("media: rc: introduce BPF_PROG_LIRC_MODE2") Signed-off-by: Sean Young Signed-off-by: Daniel Borkmann --- drivers/media/rc/bpf-lirc.c | 14 +------ include/linux/bpf-cgroup.h | 26 ++++++++++++ include/linux/bpf.h | 8 ++++ include/linux/bpf_lirc.h | 5 ++- kernel/bpf/cgroup.c | 54 +++++++++++++++++++++++++ kernel/bpf/sockmap.c | 18 +++++++++ kernel/bpf/syscall.c | 99 ++++++++++----------------------------------- 7 files changed, 132 insertions(+), 92 deletions(-) diff --git a/drivers/media/rc/bpf-lirc.c b/drivers/media/rc/bpf-lirc.c index 40826bba06b6..fcfab6635f9c 100644 --- a/drivers/media/rc/bpf-lirc.c +++ b/drivers/media/rc/bpf-lirc.c @@ -207,29 +207,19 @@ void lirc_bpf_free(struct rc_dev *rcdev) bpf_prog_array_free(rcdev->raw->progs); } -int lirc_prog_attach(const union bpf_attr *attr) +int lirc_prog_attach(const union bpf_attr *attr, struct bpf_prog *prog) { - struct bpf_prog *prog; struct rc_dev *rcdev; int ret; if (attr->attach_flags) return -EINVAL; - prog = bpf_prog_get_type(attr->attach_bpf_fd, - BPF_PROG_TYPE_LIRC_MODE2); - if (IS_ERR(prog)) - return PTR_ERR(prog); - rcdev = rc_dev_get_from_fd(attr->target_fd); - if (IS_ERR(rcdev)) { - bpf_prog_put(prog); + if (IS_ERR(rcdev)) return PTR_ERR(rcdev); - } ret = lirc_bpf_attach(rcdev, prog); - if (ret) - bpf_prog_put(prog); put_device(&rcdev->dev); diff --git a/include/linux/bpf-cgroup.h b/include/linux/bpf-cgroup.h index 975fb4cf1bb7..79795c5fa7c3 100644 --- a/include/linux/bpf-cgroup.h +++ b/include/linux/bpf-cgroup.h @@ -188,12 +188,38 @@ int __cgroup_bpf_check_dev_permission(short dev_type, u32 major, u32 minor, \ __ret; \ }) +int cgroup_bpf_prog_attach(const union bpf_attr *attr, + enum bpf_prog_type ptype, struct bpf_prog *prog); +int cgroup_bpf_prog_detach(const union bpf_attr *attr, + enum bpf_prog_type ptype); +int cgroup_bpf_prog_query(const union bpf_attr *attr, + union bpf_attr __user *uattr); #else +struct bpf_prog; struct cgroup_bpf {}; static inline void cgroup_bpf_put(struct cgroup *cgrp) {} static inline int cgroup_bpf_inherit(struct cgroup *cgrp) { return 0; } +static inline int cgroup_bpf_prog_attach(const union bpf_attr *attr, + enum bpf_prog_type ptype, + struct bpf_prog *prog) +{ + return -EINVAL; +} + +static inline int cgroup_bpf_prog_detach(const union bpf_attr *attr, + enum bpf_prog_type ptype) +{ + return -EINVAL; +} + +static inline int cgroup_bpf_prog_query(const union bpf_attr *attr, + union bpf_attr __user *uattr) +{ + return -EINVAL; +} + #define cgroup_bpf_enabled (0) #define BPF_CGROUP_PRE_CONNECT_ENABLED(sk) (0) #define BPF_CGROUP_RUN_PROG_INET_INGRESS(sk,skb) ({ 0; }) diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 7df32a3200f7..8827e797ff97 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -696,6 +696,8 @@ static inline void bpf_map_offload_map_free(struct bpf_map *map) struct sock *__sock_map_lookup_elem(struct bpf_map *map, u32 key); struct sock *__sock_hash_lookup_elem(struct bpf_map *map, void *key); int sock_map_prog(struct bpf_map *map, struct bpf_prog *prog, u32 type); +int sockmap_get_from_fd(const union bpf_attr *attr, int type, + struct bpf_prog *prog); #else static inline struct sock *__sock_map_lookup_elem(struct bpf_map *map, u32 key) { @@ -714,6 +716,12 @@ static inline int sock_map_prog(struct bpf_map *map, { return -EOPNOTSUPP; } + +static inline int sockmap_get_from_fd(const union bpf_attr *attr, int type, + struct bpf_prog *prog) +{ + return -EINVAL; +} #endif #if defined(CONFIG_XDP_SOCKETS) diff --git a/include/linux/bpf_lirc.h b/include/linux/bpf_lirc.h index 5f8a4283092d..9d9ff755ec29 100644 --- a/include/linux/bpf_lirc.h +++ b/include/linux/bpf_lirc.h @@ -5,11 +5,12 @@ #include #ifdef CONFIG_BPF_LIRC_MODE2 -int lirc_prog_attach(const union bpf_attr *attr); +int lirc_prog_attach(const union bpf_attr *attr, struct bpf_prog *prog); int lirc_prog_detach(const union bpf_attr *attr); int lirc_prog_query(const union bpf_attr *attr, union bpf_attr __user *uattr); #else -static inline int lirc_prog_attach(const union bpf_attr *attr) +static inline int lirc_prog_attach(const union bpf_attr *attr, + struct bpf_prog *prog) { return -EINVAL; } diff --git a/kernel/bpf/cgroup.c b/kernel/bpf/cgroup.c index f7c00bd6f8e4..3d83ee7df381 100644 --- a/kernel/bpf/cgroup.c +++ b/kernel/bpf/cgroup.c @@ -428,6 +428,60 @@ int __cgroup_bpf_query(struct cgroup *cgrp, const union bpf_attr *attr, return ret; } +int cgroup_bpf_prog_attach(const union bpf_attr *attr, + enum bpf_prog_type ptype, struct bpf_prog *prog) +{ + struct cgroup *cgrp; + int ret; + + cgrp = cgroup_get_from_fd(attr->target_fd); + if (IS_ERR(cgrp)) + return PTR_ERR(cgrp); + + ret = cgroup_bpf_attach(cgrp, prog, attr->attach_type, + attr->attach_flags); + cgroup_put(cgrp); + return ret; +} + +int cgroup_bpf_prog_detach(const union bpf_attr *attr, enum bpf_prog_type ptype) +{ + struct bpf_prog *prog; + struct cgroup *cgrp; + int ret; + + cgrp = cgroup_get_from_fd(attr->target_fd); + if (IS_ERR(cgrp)) + return PTR_ERR(cgrp); + + prog = bpf_prog_get_type(attr->attach_bpf_fd, ptype); + if (IS_ERR(prog)) + prog = NULL; + + ret = cgroup_bpf_detach(cgrp, prog, attr->attach_type, 0); + if (prog) + bpf_prog_put(prog); + + cgroup_put(cgrp); + return ret; +} + +int cgroup_bpf_prog_query(const union bpf_attr *attr, + union bpf_attr __user *uattr) +{ + struct cgroup *cgrp; + int ret; + + cgrp = cgroup_get_from_fd(attr->query.target_fd); + if (IS_ERR(cgrp)) + return PTR_ERR(cgrp); + + ret = cgroup_bpf_query(cgrp, attr, uattr); + + cgroup_put(cgrp); + return ret; +} + /** * __cgroup_bpf_run_filter_skb() - Run a program for packet filtering * @sk: The socket sending or receiving traffic diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index 52a91d816c0e..81d0c55a77aa 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -1915,6 +1915,24 @@ int sock_map_prog(struct bpf_map *map, struct bpf_prog *prog, u32 type) return 0; } +int sockmap_get_from_fd(const union bpf_attr *attr, int type, + struct bpf_prog *prog) +{ + int ufd = attr->target_fd; + struct bpf_map *map; + struct fd f; + int err; + + f = fdget(ufd); + map = __bpf_map_get(f); + if (IS_ERR(map)) + return PTR_ERR(map); + + err = sock_map_prog(map, prog, attr->attach_type); + fdput(f); + return err; +} + static void *sock_map_lookup(struct bpf_map *map, void *key) { return NULL; diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index 35dc466641f2..d10ecd78105f 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -1483,8 +1483,6 @@ out_free_tp: return err; } -#ifdef CONFIG_CGROUP_BPF - static int bpf_prog_attach_check_attach_type(const struct bpf_prog *prog, enum bpf_attach_type attach_type) { @@ -1499,40 +1497,6 @@ static int bpf_prog_attach_check_attach_type(const struct bpf_prog *prog, #define BPF_PROG_ATTACH_LAST_FIELD attach_flags -static int sockmap_get_from_fd(const union bpf_attr *attr, - int type, bool attach) -{ - struct bpf_prog *prog = NULL; - int ufd = attr->target_fd; - struct bpf_map *map; - struct fd f; - int err; - - f = fdget(ufd); - map = __bpf_map_get(f); - if (IS_ERR(map)) - return PTR_ERR(map); - - if (attach) { - prog = bpf_prog_get_type(attr->attach_bpf_fd, type); - if (IS_ERR(prog)) { - fdput(f); - return PTR_ERR(prog); - } - } - - err = sock_map_prog(map, prog, attr->attach_type); - if (err) { - fdput(f); - if (prog) - bpf_prog_put(prog); - return err; - } - - fdput(f); - return 0; -} - #define BPF_F_ATTACH_MASK \ (BPF_F_ALLOW_OVERRIDE | BPF_F_ALLOW_MULTI) @@ -1540,7 +1504,6 @@ static int bpf_prog_attach(const union bpf_attr *attr) { enum bpf_prog_type ptype; struct bpf_prog *prog; - struct cgroup *cgrp; int ret; if (!capable(CAP_NET_ADMIN)) @@ -1577,12 +1540,15 @@ static int bpf_prog_attach(const union bpf_attr *attr) ptype = BPF_PROG_TYPE_CGROUP_DEVICE; break; case BPF_SK_MSG_VERDICT: - return sockmap_get_from_fd(attr, BPF_PROG_TYPE_SK_MSG, true); + ptype = BPF_PROG_TYPE_SK_MSG; + break; case BPF_SK_SKB_STREAM_PARSER: case BPF_SK_SKB_STREAM_VERDICT: - return sockmap_get_from_fd(attr, BPF_PROG_TYPE_SK_SKB, true); + ptype = BPF_PROG_TYPE_SK_SKB; + break; case BPF_LIRC_MODE2: - return lirc_prog_attach(attr); + ptype = BPF_PROG_TYPE_LIRC_MODE2; + break; default: return -EINVAL; } @@ -1596,18 +1562,20 @@ static int bpf_prog_attach(const union bpf_attr *attr) return -EINVAL; } - cgrp = cgroup_get_from_fd(attr->target_fd); - if (IS_ERR(cgrp)) { - bpf_prog_put(prog); - return PTR_ERR(cgrp); + switch (ptype) { + case BPF_PROG_TYPE_SK_SKB: + case BPF_PROG_TYPE_SK_MSG: + ret = sockmap_get_from_fd(attr, ptype, prog); + break; + case BPF_PROG_TYPE_LIRC_MODE2: + ret = lirc_prog_attach(attr, prog); + break; + default: + ret = cgroup_bpf_prog_attach(attr, ptype, prog); } - ret = cgroup_bpf_attach(cgrp, prog, attr->attach_type, - attr->attach_flags); if (ret) bpf_prog_put(prog); - cgroup_put(cgrp); - return ret; } @@ -1616,9 +1584,6 @@ static int bpf_prog_attach(const union bpf_attr *attr) static int bpf_prog_detach(const union bpf_attr *attr) { enum bpf_prog_type ptype; - struct bpf_prog *prog; - struct cgroup *cgrp; - int ret; if (!capable(CAP_NET_ADMIN)) return -EPERM; @@ -1651,29 +1616,17 @@ static int bpf_prog_detach(const union bpf_attr *attr) ptype = BPF_PROG_TYPE_CGROUP_DEVICE; break; case BPF_SK_MSG_VERDICT: - return sockmap_get_from_fd(attr, BPF_PROG_TYPE_SK_MSG, false); + return sockmap_get_from_fd(attr, BPF_PROG_TYPE_SK_MSG, NULL); case BPF_SK_SKB_STREAM_PARSER: case BPF_SK_SKB_STREAM_VERDICT: - return sockmap_get_from_fd(attr, BPF_PROG_TYPE_SK_SKB, false); + return sockmap_get_from_fd(attr, BPF_PROG_TYPE_SK_SKB, NULL); case BPF_LIRC_MODE2: return lirc_prog_detach(attr); default: return -EINVAL; } - cgrp = cgroup_get_from_fd(attr->target_fd); - if (IS_ERR(cgrp)) - return PTR_ERR(cgrp); - - prog = bpf_prog_get_type(attr->attach_bpf_fd, ptype); - if (IS_ERR(prog)) - prog = NULL; - - ret = cgroup_bpf_detach(cgrp, prog, attr->attach_type, 0); - if (prog) - bpf_prog_put(prog); - cgroup_put(cgrp); - return ret; + return cgroup_bpf_prog_detach(attr, ptype); } #define BPF_PROG_QUERY_LAST_FIELD query.prog_cnt @@ -1681,9 +1634,6 @@ static int bpf_prog_detach(const union bpf_attr *attr) static int bpf_prog_query(const union bpf_attr *attr, union bpf_attr __user *uattr) { - struct cgroup *cgrp; - int ret; - if (!capable(CAP_NET_ADMIN)) return -EPERM; if (CHECK_ATTR(BPF_PROG_QUERY)) @@ -1711,14 +1661,9 @@ static int bpf_prog_query(const union bpf_attr *attr, default: return -EINVAL; } - cgrp = cgroup_get_from_fd(attr->query.target_fd); - if (IS_ERR(cgrp)) - return PTR_ERR(cgrp); - ret = cgroup_bpf_query(cgrp, attr, uattr); - cgroup_put(cgrp); - return ret; + + return cgroup_bpf_prog_query(attr, uattr); } -#endif /* CONFIG_CGROUP_BPF */ #define BPF_PROG_TEST_RUN_LAST_FIELD test.duration @@ -2365,7 +2310,6 @@ SYSCALL_DEFINE3(bpf, int, cmd, union bpf_attr __user *, uattr, unsigned int, siz case BPF_OBJ_GET: err = bpf_obj_get(&attr); break; -#ifdef CONFIG_CGROUP_BPF case BPF_PROG_ATTACH: err = bpf_prog_attach(&attr); break; @@ -2375,7 +2319,6 @@ SYSCALL_DEFINE3(bpf, int, cmd, union bpf_attr __user *, uattr, unsigned int, siz case BPF_PROG_QUERY: err = bpf_prog_query(&attr, uattr); break; -#endif case BPF_PROG_TEST_RUN: err = bpf_prog_test_run(&attr, uattr); break; -- cgit v1.2.3 From 5fadfc61934a33d362ca47c7f70786105d5681c1 Mon Sep 17 00:00:00 2001 From: Anders Roxell Date: Mon, 25 Jun 2018 16:56:05 +0200 Subject: selftests: bpf: add missing NET_SCHED to config CONFIG_NET_SCHED wasn't enabled in arm64's defconfig only for x86. So bpf/test_tunnel.sh tests fails with: RTNETLINK answers: Operation not supported RTNETLINK answers: Operation not supported We have an error talking to the kernel, -1 Enable NET_SCHED and more tests pass. Fixes: 3bce593ac06b ("selftests: bpf: config: add config fragments") Signed-off-by: Anders Roxell Acked-by: Song Liu Signed-off-by: Daniel Borkmann --- tools/testing/selftests/bpf/config | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/bpf/config b/tools/testing/selftests/bpf/config index 7eb613ffef55..b4994a94968b 100644 --- a/tools/testing/selftests/bpf/config +++ b/tools/testing/selftests/bpf/config @@ -6,6 +6,7 @@ CONFIG_TEST_BPF=m CONFIG_CGROUP_BPF=y CONFIG_NETDEVSIM=m CONFIG_NET_CLS_ACT=y +CONFIG_NET_SCHED=y CONFIG_NET_SCH_INGRESS=y CONFIG_NET_IPIP=y CONFIG_IPV6=y -- cgit v1.2.3 From b0e4b8bcd48bde31690f066044767475b2e4852b Mon Sep 17 00:00:00 2001 From: Jeffrin Jose T Date: Sat, 23 Jun 2018 00:24:17 +0530 Subject: selftests: bpf: notification about privilege required to run test_lirc_mode2.sh testing script The test_lirc_mode2.sh script require root privilege for the successful execution of the test. This patch is to notify the user about the privilege the script demands for the successful execution of the test. Signed-off-by: Jeffrin Jose T (Rajagiri SET) Acked-by: Song Liu Signed-off-by: Daniel Borkmann --- tools/testing/selftests/bpf/test_lirc_mode2.sh | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/tools/testing/selftests/bpf/test_lirc_mode2.sh b/tools/testing/selftests/bpf/test_lirc_mode2.sh index ce2e15e4f976..677686198df3 100755 --- a/tools/testing/selftests/bpf/test_lirc_mode2.sh +++ b/tools/testing/selftests/bpf/test_lirc_mode2.sh @@ -1,6 +1,15 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +msg="skip all tests:" +if [ $UID != 0 ]; then + echo $msg please run this as root >&2 + exit $ksft_skip +fi + GREEN='\033[0;92m' RED='\033[0;31m' NC='\033[0m' # No Color -- cgit v1.2.3 From dd349c3ffd93d15d01f4f5ace73870ca45ea249d Mon Sep 17 00:00:00 2001 From: Jeffrin Jose T Date: Sat, 23 Jun 2018 03:10:32 +0530 Subject: selftests: bpf: notification about privilege required to run test_lwt_seg6local.sh testing script This test needs root privilege for it's successful execution. This patch is atleast used to notify the user about the privilege the script demands for the smooth execution of the test. Signed-off-by: Jeffrin Jose T (Rajagiri SET) Acked-by: Song Liu Signed-off-by: Daniel Borkmann --- tools/testing/selftests/bpf/test_lwt_seg6local.sh | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/tools/testing/selftests/bpf/test_lwt_seg6local.sh b/tools/testing/selftests/bpf/test_lwt_seg6local.sh index 1c77994b5e71..270fa8f49573 100755 --- a/tools/testing/selftests/bpf/test_lwt_seg6local.sh +++ b/tools/testing/selftests/bpf/test_lwt_seg6local.sh @@ -21,6 +21,15 @@ # An UDP datagram is sent from fb00::1 to fb00::6. The test succeeds if this # datagram can be read on NS6 when binding to fb00::6. +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +msg="skip all tests:" +if [ $UID != 0 ]; then + echo $msg please run this as root >&2 + exit $ksft_skip +fi + TMP_FILE="/tmp/selftest_lwt_seg6local.txt" cleanup() -- cgit v1.2.3 From 6f6f42466d902c92f21b46a45e6af22d1d663607 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 25 Jun 2018 08:17:33 -0500 Subject: PCI: shpchp: Manage SHPC unconditionally on non-ACPI systems An SHPC can be operated either by platform firmware or by the OS. The OS uses a host bridge ACPI _OSC method to negotiate for control of SHPC. If firmware wants to prevent an OS from operating an SHPC, it must supply an _OSC method that declines to grant SHPC ownership to the OS. If acpi_pci_find_root() returns NULL, it means there's no ACPI host bridge device (PNP0A03 or PNP0A08) and hence no _OSC method, so the OS is always allowed to manage the SHPC. Fix a NULL pointer dereference when CONFIG_ACPI=y but the current hardware/firmware platform doesn't support ACPI. In that case, acpi_get_hp_hw_control_from_firmware() is implemented but acpi_pci_find_root() returns NULL. Fixes: 90cc0c3cc709 ("PCI: shpchp: Add shpchp_is_native()") Link: https://lkml.kernel.org/r/20180621164715.28160-1-marc.zyngier@arm.com Reported-by: Marc Zyngier Tested-by: Marc Zyngier Signed-off-by: Bjorn Helgaas Reviewed-by: Mika Westerberg --- drivers/pci/hotplug/acpi_pcihp.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c index 3979f89b250a..5bd6c1573295 100644 --- a/drivers/pci/hotplug/acpi_pcihp.c +++ b/drivers/pci/hotplug/acpi_pcihp.c @@ -7,7 +7,6 @@ * All rights reserved. * * Send feedback to - * */ #include @@ -87,8 +86,17 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *pdev) return 0; /* If _OSC exists, we should not evaluate OSHP */ + + /* + * If there's no ACPI host bridge (i.e., ACPI support is compiled + * into the kernel but the hardware platform doesn't support ACPI), + * there's nothing to do here. + */ host = pci_find_host_bridge(pdev->bus); root = acpi_pci_find_root(ACPI_HANDLE(&host->dev)); + if (!root) + return 0; + if (root->osc_support_set) goto no_control; -- cgit v1.2.3 From 941c06d58503b9f2718b20bc45ee7f1d701a1e1e Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Mon, 25 Jun 2018 13:45:09 +0530 Subject: powerpc/mm/32: Fix pgtable_page_dtor call Commit 667416f38554 ("powerpc/mm: Fix kernel crash on page table free") added a call for pgtable_page_dtor in the rcu page table free routine. We missed the fact that for 32 bit platforms we did call the 'dtor' early. Drop the extra call for pgtable_page_dtor. We remove the call from __pte_free_tlb so that we do the page table free and 'dtor' call together. This should help when we switch these platforms to pte fragments. Fixes: 667416f38554 ("powerpc/mm: Fix kernel crash on page table free") Reported-by: Christophe Leroy Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/book3s/32/pgalloc.h | 1 - arch/powerpc/include/asm/nohash/32/pgalloc.h | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/powerpc/include/asm/book3s/32/pgalloc.h b/arch/powerpc/include/asm/book3s/32/pgalloc.h index e4633803fe43..82e44b1a00ae 100644 --- a/arch/powerpc/include/asm/book3s/32/pgalloc.h +++ b/arch/powerpc/include/asm/book3s/32/pgalloc.h @@ -138,7 +138,6 @@ static inline void pgtable_free_tlb(struct mmu_gather *tlb, static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table, unsigned long address) { - pgtable_page_dtor(table); pgtable_free_tlb(tlb, page_address(table), 0); } #endif /* _ASM_POWERPC_BOOK3S_32_PGALLOC_H */ diff --git a/arch/powerpc/include/asm/nohash/32/pgalloc.h b/arch/powerpc/include/asm/nohash/32/pgalloc.h index 9de40eb614da..8825953c225b 100644 --- a/arch/powerpc/include/asm/nohash/32/pgalloc.h +++ b/arch/powerpc/include/asm/nohash/32/pgalloc.h @@ -140,7 +140,6 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table, unsigned long address) { tlb_flush_pgtable(tlb, address); - pgtable_page_dtor(table); pgtable_free_tlb(tlb, page_address(table), 0); } #endif /* _ASM_POWERPC_PGALLOC_32_H */ -- cgit v1.2.3 From 2259b7a64d71f27311a19fd7a5bed47413d75985 Mon Sep 17 00:00:00 2001 From: Dave Stevenson Date: Mon, 25 Jun 2018 15:07:12 +0100 Subject: net: lan78xx: Allow for VLAN headers in timeout calcs The frame abort timeout being set by lan78xx_set_rx_max_frame_length didn't account for any VLAN headers, resulting in very low throughput if used with tagged VLANs. Use VLAN_ETH_HLEN instead of ETH_HLEN to correct for this. Signed-off-by: Dave Stevenson Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 8dff87ec6d99..1a1d3cc8e308 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -2298,7 +2298,7 @@ static int lan78xx_change_mtu(struct net_device *netdev, int new_mtu) if ((ll_mtu % dev->maxpacket) == 0) return -EDOM; - ret = lan78xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN); + ret = lan78xx_set_rx_max_frame_length(dev, new_mtu + VLAN_ETH_HLEN); netdev->mtu = new_mtu; @@ -2587,7 +2587,8 @@ static int lan78xx_reset(struct lan78xx_net *dev) buf |= FCT_TX_CTL_EN_; ret = lan78xx_write_reg(dev, FCT_TX_CTL, buf); - ret = lan78xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN); + ret = lan78xx_set_rx_max_frame_length(dev, + dev->net->mtu + VLAN_ETH_HLEN); ret = lan78xx_read_reg(dev, MAC_RX, &buf); buf |= MAC_RX_RXEN_; -- cgit v1.2.3 From 4a27327b156e1e543c839a9358ba885564729ae7 Mon Sep 17 00:00:00 2001 From: Dave Stevenson Date: Mon, 25 Jun 2018 15:07:13 +0100 Subject: net: lan78xx: Add support for VLAN filtering. HW_VLAN_CTAG_FILTER was partially implemented, but not advertised to Linux. Complete the implementation of this. Signed-off-by: Dave Stevenson Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 1a1d3cc8e308..bd41a36924db 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -2363,7 +2363,7 @@ static int lan78xx_set_features(struct net_device *netdev, pdata->rfe_ctl &= ~(RFE_CTL_ICMP_COE_ | RFE_CTL_IGMP_COE_); } - if (features & NETIF_F_HW_VLAN_CTAG_RX) + if (features & NETIF_F_HW_VLAN_CTAG_FILTER) pdata->rfe_ctl |= RFE_CTL_VLAN_FILTER_; else pdata->rfe_ctl &= ~RFE_CTL_VLAN_FILTER_; @@ -2976,6 +2976,9 @@ static int lan78xx_bind(struct lan78xx_net *dev, struct usb_interface *intf) if (DEFAULT_TSO_CSUM_ENABLE) dev->net->features |= NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_SG; + if (DEFAULT_VLAN_FILTER_ENABLE) + dev->net->features |= NETIF_F_HW_VLAN_CTAG_FILTER; + dev->net->hw_features = dev->net->features; ret = lan78xx_setup_irq_domain(dev); -- cgit v1.2.3 From ec21ecf0aad27956dc64475e5acd78f3575df462 Mon Sep 17 00:00:00 2001 From: Dave Stevenson Date: Mon, 25 Jun 2018 15:07:14 +0100 Subject: net: lan78xx: Add support for VLAN tag stripping. The chip supports stripping the VLAN tag and reporting it in metadata. Complete the support for this. Signed-off-by: Dave Stevenson Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index bd41a36924db..28da296f8cf7 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -64,6 +64,7 @@ #define DEFAULT_RX_CSUM_ENABLE (true) #define DEFAULT_TSO_CSUM_ENABLE (true) #define DEFAULT_VLAN_FILTER_ENABLE (true) +#define DEFAULT_VLAN_RX_OFFLOAD (true) #define TX_OVERHEAD (8) #define RXW_PADDING 2 @@ -2363,6 +2364,11 @@ static int lan78xx_set_features(struct net_device *netdev, pdata->rfe_ctl &= ~(RFE_CTL_ICMP_COE_ | RFE_CTL_IGMP_COE_); } + if (features & NETIF_F_HW_VLAN_CTAG_RX) + pdata->rfe_ctl |= RFE_CTL_VLAN_STRIP_; + else + pdata->rfe_ctl &= ~RFE_CTL_VLAN_STRIP_; + if (features & NETIF_F_HW_VLAN_CTAG_FILTER) pdata->rfe_ctl |= RFE_CTL_VLAN_FILTER_; else @@ -2976,6 +2982,9 @@ static int lan78xx_bind(struct lan78xx_net *dev, struct usb_interface *intf) if (DEFAULT_TSO_CSUM_ENABLE) dev->net->features |= NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_SG; + if (DEFAULT_VLAN_RX_OFFLOAD) + dev->net->features |= NETIF_F_HW_VLAN_CTAG_RX; + if (DEFAULT_VLAN_FILTER_ENABLE) dev->net->features |= NETIF_F_HW_VLAN_CTAG_FILTER; @@ -3052,6 +3061,16 @@ static void lan78xx_rx_csum_offload(struct lan78xx_net *dev, } } +static void lan78xx_rx_vlan_offload(struct lan78xx_net *dev, + struct sk_buff *skb, + u32 rx_cmd_a, u32 rx_cmd_b) +{ + if ((dev->net->features & NETIF_F_HW_VLAN_CTAG_RX) && + (rx_cmd_a & RX_CMD_A_FVTG_)) + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), + (rx_cmd_b & 0xffff)); +} + static void lan78xx_skb_return(struct lan78xx_net *dev, struct sk_buff *skb) { int status; @@ -3116,6 +3135,8 @@ static int lan78xx_rx(struct lan78xx_net *dev, struct sk_buff *skb) if (skb->len == size) { lan78xx_rx_csum_offload(dev, skb, rx_cmd_a, rx_cmd_b); + lan78xx_rx_vlan_offload(dev, skb, + rx_cmd_a, rx_cmd_b); skb_trim(skb, skb->len - 4); /* remove fcs */ skb->truesize = size + sizeof(struct sk_buff); @@ -3134,6 +3155,7 @@ static int lan78xx_rx(struct lan78xx_net *dev, struct sk_buff *skb) skb_set_tail_pointer(skb2, size); lan78xx_rx_csum_offload(dev, skb2, rx_cmd_a, rx_cmd_b); + lan78xx_rx_vlan_offload(dev, skb2, rx_cmd_a, rx_cmd_b); skb_trim(skb2, skb2->len - 4); /* remove fcs */ skb2->truesize = size + sizeof(struct sk_buff); -- cgit v1.2.3 From 9343ac87f2a4e09bf6e27b5f31e72e9e3a82abff Mon Sep 17 00:00:00 2001 From: Dave Stevenson Date: Mon, 25 Jun 2018 15:07:15 +0100 Subject: net: lan78xx: Use s/w csum check on VLANs without tag stripping Observations of VLANs dropping packets due to invalid checksums when not offloading VLAN tag receive. With VLAN tag stripping enabled no issue is observed. Drop back to s/w checksums if VLAN offload is disabled. Signed-off-by: Dave Stevenson Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 28da296f8cf7..2e4130746c40 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -3052,8 +3052,13 @@ static void lan78xx_rx_csum_offload(struct lan78xx_net *dev, struct sk_buff *skb, u32 rx_cmd_a, u32 rx_cmd_b) { + /* HW Checksum offload appears to be flawed if used when not stripping + * VLAN headers. Drop back to S/W checksums under these conditions. + */ if (!(dev->net->features & NETIF_F_RXCSUM) || - unlikely(rx_cmd_a & RX_CMD_A_ICSM_)) { + unlikely(rx_cmd_a & RX_CMD_A_ICSM_) || + ((rx_cmd_a & RX_CMD_A_FVTG_) && + !(dev->net->features & NETIF_F_HW_VLAN_CTAG_RX))) { skb->ip_summed = CHECKSUM_NONE; } else { skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT_)); -- cgit v1.2.3 From 1b6fe9798af8cb7d80fad5dd30ee1bcd1e0f51eb Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Thu, 17 May 2018 20:20:52 -0500 Subject: ARM: davinci: board-da850-evm: fix WP pin polarity for MMC/SD When booting from MMC/SD in rw mode on DA850 EVM, the system crashes because the write protect pin should be active high and not active low. This patch fixes the polarity of the WP pin. Fixes: bdf0e8364fd3 ("ARM: davinci: da850-evm: use gpio descriptor for mmc pins") Signed-off-by: Adam Ford Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-da850-evm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index e22fb40e34bc..6d5beb11bd96 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -774,7 +774,7 @@ static struct gpiod_lookup_table mmc_gpios_table = { GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_CD_PIN, "cd", GPIO_ACTIVE_LOW), GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_WP_PIN, "wp", - GPIO_ACTIVE_LOW), + GPIO_ACTIVE_HIGH), }, }; -- cgit v1.2.3 From dffd22aed2aa1e804bccf19b30a421e89ee2ae61 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Wed, 20 Jun 2018 18:33:45 +0200 Subject: netfilter: nf_log: fix uninit read in nf_log_proc_dostring When proc_dostring() is called with a non-zero offset in strict mode, it doesn't just write to the ->data buffer, it also reads. Make sure it doesn't read uninitialized data. Fixes: c6ac37d8d884 ("netfilter: nf_log: fix error on write NONE to [...]") Signed-off-by: Jann Horn Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_log.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index 426457047578..2c47f9ec3511 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -424,6 +424,10 @@ static int nf_log_proc_dostring(struct ctl_table *table, int write, if (write) { struct ctl_table tmp = *table; + /* proc_dostring() can append to existing strings, so we need to + * initialize it as an empty string. + */ + buf[0] = '\0'; tmp.data = buf; r = proc_dostring(&tmp, write, buffer, lenp, ppos); if (r) -- cgit v1.2.3 From ce00bf07cc95a57cd20b208e02b3c2604e532ae8 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Mon, 25 Jun 2018 17:22:00 +0200 Subject: netfilter: nf_log: don't hold nf_log_mutex during user access The old code would indefinitely block other users of nf_log_mutex if a userspace access in proc_dostring() blocked e.g. due to a userfaultfd region. Fix it by moving proc_dostring() out of the locked region. This is a followup to commit 266d07cb1c9a ("netfilter: nf_log: fix sleeping function called from invalid context"), which changed this code from using rcu_read_lock() to taking nf_log_mutex. Fixes: 266d07cb1c9a ("netfilter: nf_log: fix sleeping function calle[...]") Signed-off-by: Jann Horn Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_log.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index 2c47f9ec3511..a61d6df6e5f6 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -446,14 +446,17 @@ static int nf_log_proc_dostring(struct ctl_table *table, int write, rcu_assign_pointer(net->nf.nf_loggers[tindex], logger); mutex_unlock(&nf_log_mutex); } else { + struct ctl_table tmp = *table; + + tmp.data = buf; mutex_lock(&nf_log_mutex); logger = nft_log_dereference(net->nf.nf_loggers[tindex]); if (!logger) - table->data = "NONE"; + strlcpy(buf, "NONE", sizeof(buf)); else - table->data = logger->name; - r = proc_dostring(table, write, buffer, lenp, ppos); + strlcpy(buf, logger->name, sizeof(buf)); mutex_unlock(&nf_log_mutex); + r = proc_dostring(&tmp, write, buffer, lenp, ppos); } return r; -- cgit v1.2.3 From 59b433c825569ce251371485f0e29fca888b549d Mon Sep 17 00:00:00 2001 From: Raghava Aditya Renukunta Date: Fri, 22 Jun 2018 06:55:47 -0700 Subject: scsi: aacraid: Fix PD performance regression over incorrect qd being set The driver fails to set the correct queue depth for native devices, due to failing to set the device type prior to calling aac_set_safw_target_qd(). This results in slave configure setting the queue depth to 1. This causes around 30% performance degradation. Fixed by setting the dev type before trying to set queue depth. Reported-by: Steve Best Fixes: 0bcb45fb20c21 ("scsi: aacraid: Add helper function to set queue depth") cc: stable@vger.kernel.org Signed-off-by: Raghava Aditya Renukunta Reviewed-by: David Carroll Reviewed-by: Ewan D. Milne Signed-off-by: Martin K. Petersen --- drivers/scsi/aacraid/aachba.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index a9831bd37a73..a57f3a7d4748 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -1974,7 +1974,6 @@ static void aac_set_safw_attr_all_targets(struct aac_dev *dev) u32 lun_count, nexus; u32 i, bus, target; u8 expose_flag, attribs; - u8 devtype; lun_count = aac_get_safw_phys_lun_count(dev); @@ -1992,23 +1991,23 @@ static void aac_set_safw_attr_all_targets(struct aac_dev *dev) continue; if (expose_flag != 0) { - devtype = AAC_DEVTYPE_RAID_MEMBER; - goto update_devtype; + dev->hba_map[bus][target].devtype = + AAC_DEVTYPE_RAID_MEMBER; + continue; } if (nexus != 0 && (attribs & 8)) { - devtype = AAC_DEVTYPE_NATIVE_RAW; + dev->hba_map[bus][target].devtype = + AAC_DEVTYPE_NATIVE_RAW; dev->hba_map[bus][target].rmw_nexus = nexus; } else - devtype = AAC_DEVTYPE_ARC_RAW; + dev->hba_map[bus][target].devtype = + AAC_DEVTYPE_ARC_RAW; dev->hba_map[bus][target].scan_counter = dev->scan_counter; aac_set_safw_target_qd(dev, bus, target); - -update_devtype: - dev->hba_map[bus][target].devtype = devtype; } } -- cgit v1.2.3 From b36e4523d4d56e2595e28f16f6ccf1cd6a9fc452 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 20 Jun 2018 23:32:26 +0200 Subject: netfilter: nf_conncount: fix garbage collection confirm race Yi-Hung Wei and Justin Pettit found a race in the garbage collection scheme used by nf_conncount. When doing list walk, we lookup the tuple in the conntrack table. If the lookup fails we remove this tuple from our list because the conntrack entry is gone. This is the common cause, but turns out its not the only one. The list entry could have been created just before by another cpu, i.e. the conntrack entry might not yet have been inserted into the global hash. The avoid this, we introduce a timestamp and the owning cpu. If the entry appears to be stale, evict only if: 1. The current cpu is the one that added the entry, or, 2. The timestamp is older than two jiffies The second constraint allows GC to be taken over by other cpu too (e.g. because a cpu was offlined or napi got moved to another cpu). We can't pretend the 'doubtful' entry wasn't in our list. Instead, when we don't find an entry indicate via IS_ERR that entry was removed ('did not exist' or withheld ('might-be-unconfirmed'). This most likely also fixes a xt_connlimit imbalance earlier reported by Dmitry Andrianov. Cc: Dmitry Andrianov Reported-by: Justin Pettit Reported-by: Yi-Hung Wei Signed-off-by: Florian Westphal Acked-by: Yi-Hung Wei Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conncount.c | 52 +++++++++++++++++++++++++++++++++++++++----- 1 file changed, 47 insertions(+), 5 deletions(-) diff --git a/net/netfilter/nf_conncount.c b/net/netfilter/nf_conncount.c index d8383609fe28..510039862aa9 100644 --- a/net/netfilter/nf_conncount.c +++ b/net/netfilter/nf_conncount.c @@ -47,6 +47,8 @@ struct nf_conncount_tuple { struct hlist_node node; struct nf_conntrack_tuple tuple; struct nf_conntrack_zone zone; + int cpu; + u32 jiffies32; }; struct nf_conncount_rb { @@ -91,11 +93,42 @@ bool nf_conncount_add(struct hlist_head *head, return false; conn->tuple = *tuple; conn->zone = *zone; + conn->cpu = raw_smp_processor_id(); + conn->jiffies32 = (u32)jiffies; hlist_add_head(&conn->node, head); return true; } EXPORT_SYMBOL_GPL(nf_conncount_add); +static const struct nf_conntrack_tuple_hash * +find_or_evict(struct net *net, struct nf_conncount_tuple *conn) +{ + const struct nf_conntrack_tuple_hash *found; + unsigned long a, b; + int cpu = raw_smp_processor_id(); + __s32 age; + + found = nf_conntrack_find_get(net, &conn->zone, &conn->tuple); + if (found) + return found; + b = conn->jiffies32; + a = (u32)jiffies; + + /* conn might have been added just before by another cpu and + * might still be unconfirmed. In this case, nf_conntrack_find() + * returns no result. Thus only evict if this cpu added the + * stale entry or if the entry is older than two jiffies. + */ + age = a - b; + if (conn->cpu == cpu || age >= 2) { + hlist_del(&conn->node); + kmem_cache_free(conncount_conn_cachep, conn); + return ERR_PTR(-ENOENT); + } + + return ERR_PTR(-EAGAIN); +} + unsigned int nf_conncount_lookup(struct net *net, struct hlist_head *head, const struct nf_conntrack_tuple *tuple, const struct nf_conntrack_zone *zone, @@ -103,18 +136,27 @@ unsigned int nf_conncount_lookup(struct net *net, struct hlist_head *head, { const struct nf_conntrack_tuple_hash *found; struct nf_conncount_tuple *conn; - struct hlist_node *n; struct nf_conn *found_ct; + struct hlist_node *n; unsigned int length = 0; *addit = tuple ? true : false; /* check the saved connections */ hlist_for_each_entry_safe(conn, n, head, node) { - found = nf_conntrack_find_get(net, &conn->zone, &conn->tuple); - if (found == NULL) { - hlist_del(&conn->node); - kmem_cache_free(conncount_conn_cachep, conn); + found = find_or_evict(net, conn); + if (IS_ERR(found)) { + /* Not found, but might be about to be confirmed */ + if (PTR_ERR(found) == -EAGAIN) { + length++; + if (!tuple) + continue; + + if (nf_ct_tuple_equal(&conn->tuple, tuple) && + nf_ct_zone_id(&conn->zone, conn->zone.dir) == + nf_ct_zone_id(zone, zone->dir)) + *addit = false; + } continue; } -- cgit v1.2.3 From 8b8f53af1ed9df88a4c0fbfdf3db58f62060edf3 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Tue, 19 Jun 2018 18:20:34 +0800 Subject: ceph: fix dentry leak in splice_dentry() In any case, d_splice_alias() does not drop reference of original dentry. Signed-off-by: "Yan, Zheng" Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov --- fs/ceph/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index ee764ac352ab..a866be999216 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -1135,6 +1135,7 @@ static struct dentry *splice_dentry(struct dentry *dn, struct inode *in) if (IS_ERR(realdn)) { pr_err("splice_dentry error %ld %p inode %p ino %llx.%llx\n", PTR_ERR(realdn), dn, in, ceph_vinop(in)); + dput(dn); dn = realdn; /* note realdn contains the error */ goto out; } else if (realdn) { -- cgit v1.2.3 From 2e20ce4a66b798671c60198ea2547d5e090dd991 Mon Sep 17 00:00:00 2001 From: Nick Desaulniers Date: Tue, 26 Jun 2018 16:59:40 +0100 Subject: certs/blacklist: fix const confusion Fixes commit 2be04df5668d ("certs/blacklist_nohashes.c: fix const confusion in certs blacklist") Signed-off-by: Nick Desaulniers Signed-off-by: David Howells Signed-off-by: James Morris --- certs/blacklist.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/certs/blacklist.h b/certs/blacklist.h index 150d82da8e99..1efd6fa0dc60 100644 --- a/certs/blacklist.h +++ b/certs/blacklist.h @@ -1,3 +1,3 @@ #include -extern const char __initdata *const blacklist_hashes[]; +extern const char __initconst *const blacklist_hashes[]; -- cgit v1.2.3 From 3619dec5103dd999a777e3e4ea08c8f40a6ddc57 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Tue, 26 Jun 2018 16:59:46 +0100 Subject: dh key: fix rounding up KDF output length Commit 383203eff718 ("dh key: get rid of stack allocated array") changed kdf_ctr() to assume that the length of key material to derive is a multiple of the digest size. The length was supposed to be rounded up accordingly. However, the round_up() macro was used which only gives the correct result on power-of-2 arguments, whereas not all hash algorithms have power-of-2 digest sizes. In some cases this resulted in a write past the end of the 'outbuf' buffer. Fix it by switching to roundup(), which works for non-power-of-2 inputs. Reported-by: syzbot+486f97f892efeb2075a3@syzkaller.appspotmail.com Reported-by: syzbot+29d17b7898b41ee120a5@syzkaller.appspotmail.com Reported-by: syzbot+8a608baf8751184ec727@syzkaller.appspotmail.com Reported-by: syzbot+d04e58bd384f1fe0b112@syzkaller.appspotmail.com Fixes: 383203eff718 ("dh key: get rid of stack allocated array") Signed-off-by: Eric Biggers Acked-by: Kees Cook Acked-by: Tycho Andersen Signed-off-by: James Morris --- security/keys/dh.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/security/keys/dh.c b/security/keys/dh.c index f7403821db7f..b203f7758f97 100644 --- a/security/keys/dh.c +++ b/security/keys/dh.c @@ -142,6 +142,8 @@ static void kdf_dealloc(struct kdf_sdesc *sdesc) * The src pointer is defined as Z || other info where Z is the shared secret * from DH and other info is an arbitrary string (see SP800-56A section * 5.8.1.2). + * + * 'dlen' must be a multiple of the digest size. */ static int kdf_ctr(struct kdf_sdesc *sdesc, const u8 *src, unsigned int slen, u8 *dst, unsigned int dlen, unsigned int zlen) @@ -205,8 +207,8 @@ static int keyctl_dh_compute_kdf(struct kdf_sdesc *sdesc, { uint8_t *outbuf = NULL; int ret; - size_t outbuf_len = round_up(buflen, - crypto_shash_digestsize(sdesc->shash.tfm)); + size_t outbuf_len = roundup(buflen, + crypto_shash_digestsize(sdesc->shash.tfm)); outbuf = kmalloc(outbuf_len, GFP_KERNEL); if (!outbuf) { -- cgit v1.2.3 From 26b5b874aff5659a7e26e5b1997e3df2c41fa7fd Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Mon, 25 Jun 2018 16:25:44 +0200 Subject: scsi: sg: mitigate read/write abuse As Al Viro noted in commit 128394eff343 ("sg_write()/bsg_write() is not fit to be called under KERNEL_DS"), sg improperly accesses userspace memory outside the provided buffer, permitting kernel memory corruption via splice(). But it doesn't just do it on ->write(), also on ->read(). As a band-aid, make sure that the ->read() and ->write() handlers can not be called in weird contexts (kernel context or credentials different from file opener), like for ib_safe_file_access(). If someone needs to use these interfaces from different security contexts, a new interface should be written that goes through the ->ioctl() handler. I've mostly copypasted ib_safe_file_access() over as sg_safe_file_access() because I couldn't find a good common header - please tell me if you know a better way. [mkp: s/_safe_/_check_/] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: Signed-off-by: Jann Horn Acked-by: Douglas Gilbert Signed-off-by: Martin K. Petersen --- drivers/scsi/sg.c | 42 ++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 40 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 53ae52dbff84..cd2fdac000c9 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -51,6 +51,7 @@ static int sg_version_num = 30536; /* 2 digits for each component */ #include #include #include +#include /* for sg_check_file_access() */ #include "scsi.h" #include @@ -209,6 +210,33 @@ static void sg_device_destroy(struct kref *kref); sdev_prefix_printk(prefix, (sdp)->device, \ (sdp)->disk->disk_name, fmt, ##a) +/* + * The SCSI interfaces that use read() and write() as an asynchronous variant of + * ioctl(..., SG_IO, ...) are fundamentally unsafe, since there are lots of ways + * to trigger read() and write() calls from various contexts with elevated + * privileges. This can lead to kernel memory corruption (e.g. if these + * interfaces are called through splice()) and privilege escalation inside + * userspace (e.g. if a process with access to such a device passes a file + * descriptor to a SUID binary as stdin/stdout/stderr). + * + * This function provides protection for the legacy API by restricting the + * calling context. + */ +static int sg_check_file_access(struct file *filp, const char *caller) +{ + if (filp->f_cred != current_real_cred()) { + pr_err_once("%s: process %d (%s) changed security contexts after opening file descriptor, this is not allowed.\n", + caller, task_tgid_vnr(current), current->comm); + return -EPERM; + } + if (uaccess_kernel()) { + pr_err_once("%s: process %d (%s) called from kernel context, this is not allowed.\n", + caller, task_tgid_vnr(current), current->comm); + return -EACCES; + } + return 0; +} + static int sg_allow_access(struct file *filp, unsigned char *cmd) { struct sg_fd *sfp = filp->private_data; @@ -393,6 +421,14 @@ sg_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos) struct sg_header *old_hdr = NULL; int retval = 0; + /* + * This could cause a response to be stranded. Close the associated + * file descriptor to free up any resources being held. + */ + retval = sg_check_file_access(filp, __func__); + if (retval) + return retval; + if ((!(sfp = (Sg_fd *) filp->private_data)) || (!(sdp = sfp->parentdp))) return -ENXIO; SCSI_LOG_TIMEOUT(3, sg_printk(KERN_INFO, sdp, @@ -580,9 +616,11 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) struct sg_header old_hdr; sg_io_hdr_t *hp; unsigned char cmnd[SG_MAX_CDB_SIZE]; + int retval; - if (unlikely(uaccess_kernel())) - return -EINVAL; + retval = sg_check_file_access(filp, __func__); + if (retval) + return retval; if ((!(sfp = (Sg_fd *) filp->private_data)) || (!(sdp = sfp->parentdp))) return -ENXIO; -- cgit v1.2.3 From 4595299c5eaebbec0ca5822214ad1925a10b3876 Mon Sep 17 00:00:00 2001 From: Thor Thayer Date: Fri, 22 Jun 2018 13:35:38 -0500 Subject: arm64: dts: stratix10: Fix SPI nodes for Stratix10 Remove the unused bus-num node and change num-chipselect to num-cs to match SPI bindings. Cc: stable@vger.kernel.org Fixes: 78cd6a9d8e154 ("arm64: dts: Add base stratix 10 dtsi") Signed-off-by: Thor Thayer Signed-off-by: Dinh Nguyen Signed-off-by: Olof Johansson --- arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index e6b059378dc0..67dac595dc72 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -309,8 +309,7 @@ interrupts = <0 99 4>; resets = <&rst SPIM0_RESET>; reg-io-width = <4>; - num-chipselect = <4>; - bus-num = <0>; + num-cs = <4>; status = "disabled"; }; @@ -322,8 +321,7 @@ interrupts = <0 100 4>; resets = <&rst SPIM1_RESET>; reg-io-width = <4>; - num-chipselect = <4>; - bus-num = <0>; + num-cs = <4>; status = "disabled"; }; -- cgit v1.2.3 From 975ba94c2c3aca4d9f1ae26f3916d7787495ce86 Mon Sep 17 00:00:00 2001 From: Thor Thayer Date: Fri, 22 Jun 2018 13:37:34 -0500 Subject: ARM: dts: Fix SPI node for Arria10 Remove the unused bus-num node and change num-chipselect to num-cs to match SPI bindings. Cc: stable@vger.kernel.org Fixes: f2d6f8f817814 ("ARM: dts: socfpga: Add SPI Master1 for Arria10 SR chip") Signed-off-by: Thor Thayer Signed-off-by: Dinh Nguyen Signed-off-by: Olof Johansson --- arch/arm/boot/dts/socfpga_arria10.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index d8b1aa309f76..791ca15c799e 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -593,8 +593,7 @@ #size-cells = <0>; reg = <0xffda5000 0x100>; interrupts = <0 102 4>; - num-chipselect = <4>; - bus-num = <0>; + num-cs = <4>; /*32bit_access;*/ tx-dma-channel = <&pdma 16>; rx-dma-channel = <&pdma 17>; -- cgit v1.2.3 From 15bfd21fbc5d35834b9ea383dc458a1f0c9e3434 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Tue, 26 Jun 2018 09:14:58 -0600 Subject: block: Fix transfer when chunk sectors exceeds max A device may have boundary restrictions where the number of sectors between boundaries exceeds its max transfer size. In this case, we need to cap the max size to the smaller of the two limits. Reported-by: Jitendra Bhivare Tested-by: Jitendra Bhivare Cc: Reviewed-by: Martin K. Petersen Signed-off-by: Keith Busch Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 9154570edf29..79226ca8f80f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1119,8 +1119,8 @@ static inline unsigned int blk_max_size_offset(struct request_queue *q, if (!q->limits.chunk_sectors) return q->limits.max_sectors; - return q->limits.chunk_sectors - - (offset & (q->limits.chunk_sectors - 1)); + return min(q->limits.max_sectors, (unsigned int)(q->limits.chunk_sectors - + (offset & (q->limits.chunk_sectors - 1)))); } static inline unsigned int blk_rq_get_max_sectors(struct request *rq, -- cgit v1.2.3 From 2c772068fc1e93638702dd7b79eed9eaca0a1cd9 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Wed, 6 Jun 2018 17:39:42 +0200 Subject: Documentation: devicetree: tilcdc: fix spelling mistake "suppors" -> "supports" Trivial fix to spelling mistake in tilcdc.txt devicetree documentation. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt index 6fddb4f4f71a..3055d5c2c04e 100644 --- a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt +++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt @@ -36,7 +36,7 @@ Optional nodes: - port/ports: to describe a connection to an external encoder. The binding follows Documentation/devicetree/bindings/graph.txt and - suppors a single port with a single endpoint. + supports a single port with a single endpoint. - See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting -- cgit v1.2.3 From e88d133d6229de49cce1f8bc11455e93b6f9b837 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 20 Jun 2018 15:47:26 -0300 Subject: dt-bindings: w1-gpio: Remove unneeded unit address Remove unneeded unit address from onewire node, so that dtc does not complain that unit address is present without a corresponding reg entry, when such use is made on a real dts file. Signed-off-by: Fabio Estevam Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/w1/w1-gpio.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/w1/w1-gpio.txt b/Documentation/devicetree/bindings/w1/w1-gpio.txt index 6e09c35d9f1a..37091902a021 100644 --- a/Documentation/devicetree/bindings/w1/w1-gpio.txt +++ b/Documentation/devicetree/bindings/w1/w1-gpio.txt @@ -15,7 +15,7 @@ Optional properties: Examples: - onewire@0 { + onewire { compatible = "w1-gpio"; gpios = <&gpio 126 0>, <&gpio 105 0>; }; -- cgit v1.2.3 From 5bfabc0aabe64a5fccc7afa6e5a9cc4443d8898b Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 13 Jun 2018 10:50:11 -0700 Subject: dt-bindings: soc: qcom: Fix default clock-freq for qcom,geni-i2c In an early version of the I2C patch that was posted to the list the default I2C frequency (if none was specified) was 400 kHz. There was debate on the list and we decided that it would be more consistent with the rest of i2c if we defaulted to 100 kHz. ...but we never updated the bindings. Let's fix this. NOTE: since the i2c driver itself hasn't actually landed yet and the SoC here is very new it seems terribly unlikely that anyone was relying on the old 400 kHz number, so I'll assume this is an OK "incompatible" device tree change. Signed-off-by: Douglas Anderson Reviewed-by: Bjorn Andersson Acked-by: Wolfram Sang Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt index d330c73de9a2..68b7d6207e3d 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt @@ -39,7 +39,7 @@ Required properties: Optional property: - clock-frequency: Desired I2C bus clock frequency in Hz. - When missing default to 400000Hz. + When missing default to 100000Hz. Child nodes should conform to I2C bus binding as described in i2c.txt. -- cgit v1.2.3 From a47c9b3943164453d4f580ea174a6ddcb37554c3 Mon Sep 17 00:00:00 2001 From: Jonathan Neuschäfer Date: Sun, 17 Jun 2018 16:31:18 +0200 Subject: dt-bindings: Fix unbalanced quotation marks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Multiple binding documents have various forms of unbalanced quotation marks. Fix them. Signed-off-by: Jonathan Neuschäfer Acked-by: Krzysztof Kozlowski Acked-by: Jon Hunter Acked-by: Srinivas Kandagatla Acked-by: Dmitry Torokhov Acked-by: Florian Fainelli Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt | 2 +- Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt | 2 +- Documentation/devicetree/bindings/input/touchscreen/hideep.txt | 2 +- .../devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt | 2 +- .../devicetree/bindings/interrupt-controller/st,stm32-exti.txt | 2 +- Documentation/devicetree/bindings/mips/brcm/soc.txt | 2 +- Documentation/devicetree/bindings/net/fsl-fman.txt | 2 +- Documentation/devicetree/bindings/power/power_domain.txt | 2 +- Documentation/devicetree/bindings/regulator/tps65090.txt | 2 +- Documentation/devicetree/bindings/reset/st,sti-softreset.txt | 2 +- Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt | 2 +- Documentation/devicetree/bindings/sound/qcom,apq8096.txt | 2 +- 12 files changed, 12 insertions(+), 12 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index bdadc3da9556..6970f30a3770 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt @@ -66,7 +66,7 @@ Required root node properties: - "insignal,arndale-octa" - for Exynos5420-based Insignal Arndale Octa board. - "insignal,origen" - for Exynos4210-based Insignal Origen board. - - "insignal,origen4412 - for Exynos4412-based Insignal Origen board. + - "insignal,origen4412" - for Exynos4412-based Insignal Origen board. Optional nodes: diff --git a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt index 20fc72d9e61e..45a61b462287 100644 --- a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt @@ -1,7 +1,7 @@ Nintendo Wii (Hollywood) GPIO controller Required properties: -- compatible: "nintendo,hollywood-gpio +- compatible: "nintendo,hollywood-gpio" - reg: Physical base address and length of the controller's registers. - gpio-controller: Marks the device node as a GPIO controller. - #gpio-cells: Should be <2>. The first cell is the pin number and the diff --git a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt index 121d9b7c79a2..1063c30d53f7 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt @@ -32,7 +32,7 @@ i2c@00000000 { reg = <0x6c>; interrupt-parent = <&gpx1>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&ldo15_reg>"; + vdd-supply = <&ldo15_reg>; vid-supply = <&ldo18_reg>; reset-gpios = <&gpx1 5 0>; touchscreen-size-x = <1080>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt index 1099fe0788fa..f246ccbf8838 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt @@ -15,7 +15,7 @@ Required properties: include "nvidia,tegra30-ictlr". - reg : Specifies base physical address and size of the registers. Each controller must be described separately (Tegra20 has 4 of them, - whereas Tegra30 and later have 5" + whereas Tegra30 and later have 5). - interrupt-controller : Identifies the node as an interrupt controller. - #interrupt-cells : Specifies the number of cells needed to encode an interrupt source. The value must be 3. diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt index 136bd612bd83..6a36bf66d932 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt @@ -12,7 +12,7 @@ Required properties: specifier, shall be 2 - interrupts: interrupts references to primary interrupt controller (only needed for exti controller with multiple exti under - same parent interrupt: st,stm32-exti and st,stm32h7-exti") + same parent interrupt: st,stm32-exti and st,stm32h7-exti) Example: diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt index 356c29789cf5..3a66d3c483e1 100644 --- a/Documentation/devicetree/bindings/mips/brcm/soc.txt +++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt @@ -152,7 +152,7 @@ Required properties: - compatible : should contain one of: "brcm,bcm7425-timers" "brcm,bcm7429-timers" - "brcm,bcm7435-timers and + "brcm,bcm7435-timers" and "brcm,brcmstb-timers" - reg : the timers register range - interrupts : the interrupt line for this timer block diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt index df873d1f3b7c..f8c33890bc29 100644 --- a/Documentation/devicetree/bindings/net/fsl-fman.txt +++ b/Documentation/devicetree/bindings/net/fsl-fman.txt @@ -238,7 +238,7 @@ PROPERTIES Must include one of the following: - "fsl,fman-dtsec" for dTSEC MAC - "fsl,fman-xgec" for XGEC MAC - - "fsl,fman-memac for mEMAC MAC + - "fsl,fman-memac" for mEMAC MAC - cell-index Usage: required diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt index 9b387f861aed..7dec508987c7 100644 --- a/Documentation/devicetree/bindings/power/power_domain.txt +++ b/Documentation/devicetree/bindings/power/power_domain.txt @@ -133,7 +133,7 @@ located inside a PM domain with index 0 of a power controller represented by a node with the label "power". In the second example the consumer device are partitioned across two PM domains, the first with index 0 and the second with index 1, of a power controller that -is represented by a node with the label "power. +is represented by a node with the label "power". Optional properties: - required-opps: This contains phandle to an OPP node in another device's OPP diff --git a/Documentation/devicetree/bindings/regulator/tps65090.txt b/Documentation/devicetree/bindings/regulator/tps65090.txt index ca69f5e3040c..ae326f263597 100644 --- a/Documentation/devicetree/bindings/regulator/tps65090.txt +++ b/Documentation/devicetree/bindings/regulator/tps65090.txt @@ -16,7 +16,7 @@ Required properties: Optional properties: - ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3. If DCDCs are externally controlled then this property should be there. -- "dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3. +- dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3. If DCDCs are externally controlled and if it is from GPIO then GPIO number should be provided. If it is externally controlled and no GPIO entry then driver will just configure this rails as external control diff --git a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt index a21658f18fe6..3661e6153a92 100644 --- a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt +++ b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt @@ -15,7 +15,7 @@ Please refer to reset.txt in this directory for common reset controller binding usage. Required properties: -- compatible: Should be st,stih407-softreset"; +- compatible: Should be "st,stih407-softreset"; - #reset-cells: 1, see below example: diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt index 6a4aadc4ce06..84b28dbe9f15 100644 --- a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt +++ b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt @@ -30,7 +30,7 @@ Required properties: Board connectors: * Headset Mic - * Secondary Mic", + * Secondary Mic * DMIC * Ext Spk diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt index aa54e49fc8a2..c7600a93ab39 100644 --- a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt +++ b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt @@ -35,7 +35,7 @@ This binding describes the APQ8096 sound card, which uses qdsp for audio. "Digital Mic3" Audio pins and MicBias on WCD9335 Codec: - "MIC_BIAS1 + "MIC_BIAS1" "MIC_BIAS2" "MIC_BIAS3" "MIC_BIAS4" -- cgit v1.2.3 From b697d7d8c741f27b728a878fc55852b06d0f6f5e Mon Sep 17 00:00:00 2001 From: "Michael J. Ruhl" Date: Wed, 20 Jun 2018 09:29:08 -0700 Subject: IB/hfi1: Fix incorrect mixing of ERR_PTR and NULL return values The __get_txreq() function can return a pointer, ERR_PTR(-EBUSY), or NULL. All of the relevant call sites look for IS_ERR, so the NULL return would lead to a NULL pointer exception. Do not use the ERR_PTR mechanism for this function. Update all call sites to handle the return value correctly. Clean up error paths to reflect return value. Fixes: 45842abbb292 ("staging/rdma/hfi1: move txreq header code") Cc: # 4.9.x+ Reported-by: Dan Carpenter Reviewed-by: Mike Marciniszyn Reviewed-by: Kamenee Arumugam Signed-off-by: Michael J. Ruhl Signed-off-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/rc.c | 2 +- drivers/infiniband/hw/hfi1/uc.c | 4 ++-- drivers/infiniband/hw/hfi1/ud.c | 4 ++-- drivers/infiniband/hw/hfi1/verbs_txreq.c | 4 ++-- drivers/infiniband/hw/hfi1/verbs_txreq.h | 4 ++-- 5 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/rc.c b/drivers/infiniband/hw/hfi1/rc.c index 1a1a47ac53c6..f15c93102081 100644 --- a/drivers/infiniband/hw/hfi1/rc.c +++ b/drivers/infiniband/hw/hfi1/rc.c @@ -271,7 +271,7 @@ int hfi1_make_rc_req(struct rvt_qp *qp, struct hfi1_pkt_state *ps) lockdep_assert_held(&qp->s_lock); ps->s_txreq = get_txreq(ps->dev, qp); - if (IS_ERR(ps->s_txreq)) + if (!ps->s_txreq) goto bail_no_tx; if (priv->hdr_type == HFI1_PKT_TYPE_9B) { diff --git a/drivers/infiniband/hw/hfi1/uc.c b/drivers/infiniband/hw/hfi1/uc.c index b7b671017e59..e254dcec6f64 100644 --- a/drivers/infiniband/hw/hfi1/uc.c +++ b/drivers/infiniband/hw/hfi1/uc.c @@ -1,5 +1,5 @@ /* - * Copyright(c) 2015, 2016 Intel Corporation. + * Copyright(c) 2015 - 2018 Intel Corporation. * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. @@ -72,7 +72,7 @@ int hfi1_make_uc_req(struct rvt_qp *qp, struct hfi1_pkt_state *ps) int middle = 0; ps->s_txreq = get_txreq(ps->dev, qp); - if (IS_ERR(ps->s_txreq)) + if (!ps->s_txreq) goto bail_no_tx; if (!(ib_rvt_state_ops[qp->state] & RVT_PROCESS_SEND_OK)) { diff --git a/drivers/infiniband/hw/hfi1/ud.c b/drivers/infiniband/hw/hfi1/ud.c index 1ab332f1866e..70d39fc450a1 100644 --- a/drivers/infiniband/hw/hfi1/ud.c +++ b/drivers/infiniband/hw/hfi1/ud.c @@ -1,5 +1,5 @@ /* - * Copyright(c) 2015, 2016 Intel Corporation. + * Copyright(c) 2015 - 2018 Intel Corporation. * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. @@ -503,7 +503,7 @@ int hfi1_make_ud_req(struct rvt_qp *qp, struct hfi1_pkt_state *ps) u32 lid; ps->s_txreq = get_txreq(ps->dev, qp); - if (IS_ERR(ps->s_txreq)) + if (!ps->s_txreq) goto bail_no_tx; if (!(ib_rvt_state_ops[qp->state] & RVT_PROCESS_NEXT_SEND_OK)) { diff --git a/drivers/infiniband/hw/hfi1/verbs_txreq.c b/drivers/infiniband/hw/hfi1/verbs_txreq.c index 873e48ea923f..c4ab2d5b4502 100644 --- a/drivers/infiniband/hw/hfi1/verbs_txreq.c +++ b/drivers/infiniband/hw/hfi1/verbs_txreq.c @@ -1,5 +1,5 @@ /* - * Copyright(c) 2016 - 2017 Intel Corporation. + * Copyright(c) 2016 - 2018 Intel Corporation. * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. @@ -94,7 +94,7 @@ struct verbs_txreq *__get_txreq(struct hfi1_ibdev *dev, struct rvt_qp *qp) __must_hold(&qp->s_lock) { - struct verbs_txreq *tx = ERR_PTR(-EBUSY); + struct verbs_txreq *tx = NULL; write_seqlock(&dev->txwait_lock); if (ib_rvt_state_ops[qp->state] & RVT_PROCESS_RECV_OK) { diff --git a/drivers/infiniband/hw/hfi1/verbs_txreq.h b/drivers/infiniband/hw/hfi1/verbs_txreq.h index 729244c3086c..1c19bbc764b2 100644 --- a/drivers/infiniband/hw/hfi1/verbs_txreq.h +++ b/drivers/infiniband/hw/hfi1/verbs_txreq.h @@ -1,5 +1,5 @@ /* - * Copyright(c) 2016 Intel Corporation. + * Copyright(c) 2016 - 2018 Intel Corporation. * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. @@ -83,7 +83,7 @@ static inline struct verbs_txreq *get_txreq(struct hfi1_ibdev *dev, if (unlikely(!tx)) { /* call slow path to get the lock */ tx = __get_txreq(dev, qp); - if (IS_ERR(tx)) + if (!tx) return tx; } tx->qp = qp; -- cgit v1.2.3 From 68bb22e9d561ad7c20274eee92058048ac689b98 Mon Sep 17 00:00:00 2001 From: Alan Douglas Date: Fri, 22 Jun 2018 17:17:17 +0100 Subject: PCI: Initialize endpoint library before controllers The endpoint library must be initialized before its users, which are in drivers/pci/controllers. The endpoint initialization currently depends on link order. This corrects a kernel crash when loading the Cadence EP driver, since it calls devm_pci_epc_create() and this is only valid once the endpoint library has been initialized. Fixes: 6e0832fa432e ("PCI: Collect all native drivers under drivers/pci/controller/") Signed-off-by: Alan Douglas Signed-off-by: Bjorn Helgaas --- drivers/pci/Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 535201984b8b..1b2cfe51e8d7 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -28,10 +28,10 @@ obj-$(CONFIG_PCI_PF_STUB) += pci-pf-stub.o obj-$(CONFIG_PCI_ECAM) += ecam.o obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o -obj-y += controller/ -obj-y += switch/ - # Endpoint library must be initialized before its users obj-$(CONFIG_PCI_ENDPOINT) += endpoint/ +obj-y += controller/ +obj-y += switch/ + ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG -- cgit v1.2.3 From 925d31668d5b6c9849c50167f31f9b5cf9eec892 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Tue, 19 Jun 2018 12:21:05 +0100 Subject: PCI: controller: Move PCI_DOMAINS selection to arch Kconfig Commit 51bc085d6454 ("PCI: Improve host drivers compile test coverage") added configuration options to allow PCI host controller drivers to be compile tested on all architectures. Some host controller drivers (eg PCIE_ALTERA) config entries select the PCI_DOMAINS config option to enable PCI domains management in the kernel. Now that host controller drivers can be compiled on all architectures, this triggers build regressions on arches that do not implement the PCI_DOMAINS required API (ie pci_domain_nr()): drivers/ata/pata_ali.c: In function 'ali_init_chipset': drivers/ata/pata_ali.c:469:38: error: implicit declaration of function 'pci_domain_nr'; did you mean 'pci_iomap_wc'? Furthemore, some software configurations (ie Jailhouse) require a PCI_DOMAINS enabled kernel to configure multiple host controllers without having an explicit dependency on the ARM platform on which they run. Make PCI_DOMAINS a visible configuration option on ARM so that software configurations that need it can manually select it and move the PCI_DOMAINS selection from PCI controllers configuration file to ARM sub-arch config entries that currently require it, fixing the issue. Fixes: 51bc085d6454 ("PCI: Improve host drivers compile test coverage") Link: https://lkml.kernel.org/r/20180612170229.GA10141@roeck-us.net Reported-by: Guenter Roeck Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Acked-by: Jan Kiszka Acked-by: Ley Foon Tan Acked-by: Rob Herring Cc: Scott Branden Cc: Will Deacon Cc: Russell King Cc: Guenter Roeck --- arch/arm/Kconfig | 8 +++++++- arch/arm/mach-bcm/Kconfig | 1 + arch/arm/mach-socfpga/Kconfig | 1 + drivers/pci/controller/Kconfig | 3 --- 4 files changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 54eeb8d00bc6..843edfd000be 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1245,8 +1245,14 @@ config PCI VESA. If you have PCI, say Y, otherwise N. config PCI_DOMAINS - bool + bool "Support for multiple PCI domains" depends on PCI + help + Enable PCI domains kernel management. Say Y if your machine + has a PCI bus hierarchy that requires more than one PCI + domain (aka segment) to be correctly managed. Say N otherwise. + + If you don't know what to do here, say N. config PCI_DOMAINS_GENERIC def_bool PCI_DOMAINS diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index c46a728df44e..25aac6ee2ab1 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -20,6 +20,7 @@ config ARCH_BCM_IPROC select GPIOLIB select ARM_AMBA select PINCTRL + select PCI_DOMAINS if PCI help This enables support for systems based on Broadcom IPROC architected SoCs. The IPROC complex contains one or more ARM CPUs along with common diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index d0f62eacf59d..4adb901dd5eb 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -10,6 +10,7 @@ menuconfig ARCH_SOCFPGA select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP select MFD_SYSCON + select PCI_DOMAINS if PCI if ARCH_SOCFPGA config SOCFPGA_SUSPEND diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index 18fa09b3ac8f..cc9fa02d32a0 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -96,7 +96,6 @@ config PCI_HOST_GENERIC depends on OF select PCI_HOST_COMMON select IRQ_DOMAIN - select PCI_DOMAINS help Say Y here if you want to support a simple generic PCI host controller, such as the one emulated by kvmtool. @@ -138,7 +137,6 @@ config PCI_VERSATILE config PCIE_IPROC tristate - select PCI_DOMAINS help This enables the iProc PCIe core controller support for Broadcom's iProc family of SoCs. An appropriate bus interface driver needs @@ -176,7 +174,6 @@ config PCIE_IPROC_MSI config PCIE_ALTERA bool "Altera PCIe controller" depends on ARM || NIOS2 || COMPILE_TEST - select PCI_DOMAINS help Say Y here if you want to enable PCIe controller support on Altera FPGA. -- cgit v1.2.3 From 8ffd569aaa818f2624ca821d9a246342fa8b8c50 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Mon, 4 Jun 2018 19:46:53 +0300 Subject: net/mlx5e: Don't attempt to dereference the ppriv struct if not being eswitch manager The check for cpu hit statistics was not returning immediate false for any non vport rep netdev and hence we crashed (say on mlx5 probed VFs) if user-space tool was calling into any possible netdev in the system. Fix that by doing a proper check before dereferencing. Fixes: 1d447a39142e ('net/mlx5e: Extendable vport representor netdev private data') Signed-off-by: Or Gerlitz Reported-by: Eli Cohen Reviewed-by: Eli Cohen Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 57987f6546e8..378ad74518ec 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -837,8 +837,12 @@ bool mlx5e_is_uplink_rep(struct mlx5e_priv *priv) static bool mlx5e_is_vf_vport_rep(struct mlx5e_priv *priv) { struct mlx5e_rep_priv *rpriv = priv->ppriv; - struct mlx5_eswitch_rep *rep = rpriv->rep; + struct mlx5_eswitch_rep *rep; + if (!MLX5_CAP_GEN(priv->mdev, eswitch_flow_table)) + return false; + + rep = rpriv->rep; if (rep && rep->vport != FDB_UPLINK_VPORT) return true; -- cgit v1.2.3 From 0efc8562491b7d36f6bbc4fbc8f3348cb6641e9c Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 31 May 2018 11:16:18 +0300 Subject: net/mlx5: E-Switch, Avoid setup attempt if not being e-switch manager In smartnic env, the host (PF) driver might not be an e-switch manager, hence the FW will err on driver attempts to deal with setting/unsetting the eswitch and as a result the overall setup of sriov will fail. Fix that by avoiding the operation if e-switch management is not allowed for this driver instance. While here, move to use the correct name for the esw manager capability name. Fixes: 81848731ff40 ('net/mlx5: E-Switch, Add SR-IOV (FDB) support') Signed-off-by: Or Gerlitz Reported-by: Guy Kushnir Reviewed-by: Eli Cohen Tested-by: Eli Cohen Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 3 ++- drivers/net/ethernet/mellanox/mlx5/core/fw.c | 5 +++-- drivers/net/ethernet/mellanox/mlx5/core/sriov.c | 7 ++++++- include/linux/mlx5/eswitch.h | 2 ++ include/linux/mlx5/mlx5_ifc.h | 2 +- 7 files changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 378ad74518ec..60236f73373c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -839,7 +839,7 @@ static bool mlx5e_is_vf_vport_rep(struct mlx5e_priv *priv) struct mlx5e_rep_priv *rpriv = priv->ppriv; struct mlx5_eswitch_rep *rep; - if (!MLX5_CAP_GEN(priv->mdev, eswitch_flow_table)) + if (!MLX5_ESWITCH_MANAGER(priv->mdev)) return false; rep = rpriv->rep; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index f63dfbcd29fe..103fd6a0cc65 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -1604,7 +1604,7 @@ int mlx5_eswitch_enable_sriov(struct mlx5_eswitch *esw, int nvfs, int mode) if (!ESW_ALLOWED(esw)) return 0; - if (!MLX5_CAP_GEN(esw->dev, eswitch_flow_table) || + if (!MLX5_ESWITCH_MANAGER(esw->dev) || !MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, ft_support)) { esw_warn(esw->dev, "E-Switch FDB is not supported, aborting ...\n"); return -EOPNOTSUPP; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index 49a75d31185e..f1a86cea86a0 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -32,6 +32,7 @@ #include #include +#include #include "mlx5_core.h" #include "fs_core.h" @@ -2652,7 +2653,7 @@ int mlx5_init_fs(struct mlx5_core_dev *dev) goto err; } - if (MLX5_CAP_GEN(dev, eswitch_flow_table)) { + if (MLX5_ESWITCH_MANAGER(dev)) { if (MLX5_CAP_ESW_FLOWTABLE_FDB(dev, ft_support)) { err = init_fdb_root_ns(steering); if (err) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw.c b/drivers/net/ethernet/mellanox/mlx5/core/fw.c index afd9f4fa22f4..41ad24f0de2c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fw.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fw.c @@ -32,6 +32,7 @@ #include #include +#include #include #include "mlx5_core.h" #include "../../mlxfw/mlxfw.h" @@ -159,13 +160,13 @@ int mlx5_query_hca_caps(struct mlx5_core_dev *dev) } if (MLX5_CAP_GEN(dev, vport_group_manager) && - MLX5_CAP_GEN(dev, eswitch_flow_table)) { + MLX5_ESWITCH_MANAGER(dev)) { err = mlx5_core_get_caps(dev, MLX5_CAP_ESWITCH_FLOW_TABLE); if (err) return err; } - if (MLX5_CAP_GEN(dev, eswitch_flow_table)) { + if (MLX5_ESWITCH_MANAGER(dev)) { err = mlx5_core_get_caps(dev, MLX5_CAP_ESWITCH); if (err) return err; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sriov.c b/drivers/net/ethernet/mellanox/mlx5/core/sriov.c index 2a8b529ce6dd..a0674962f02c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/sriov.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/sriov.c @@ -88,6 +88,9 @@ static int mlx5_device_enable_sriov(struct mlx5_core_dev *dev, int num_vfs) return -EBUSY; } + if (!MLX5_ESWITCH_MANAGER(dev)) + goto enable_vfs_hca; + err = mlx5_eswitch_enable_sriov(dev->priv.eswitch, num_vfs, SRIOV_LEGACY); if (err) { mlx5_core_warn(dev, @@ -95,6 +98,7 @@ static int mlx5_device_enable_sriov(struct mlx5_core_dev *dev, int num_vfs) return err; } +enable_vfs_hca: for (vf = 0; vf < num_vfs; vf++) { err = mlx5_core_enable_hca(dev, vf + 1); if (err) { @@ -140,7 +144,8 @@ static void mlx5_device_disable_sriov(struct mlx5_core_dev *dev) } out: - mlx5_eswitch_disable_sriov(dev->priv.eswitch); + if (MLX5_ESWITCH_MANAGER(dev)) + mlx5_eswitch_disable_sriov(dev->priv.eswitch); if (mlx5_wait_for_vf_pages(dev)) mlx5_core_warn(dev, "timeout reclaiming VFs pages\n"); diff --git a/include/linux/mlx5/eswitch.h b/include/linux/mlx5/eswitch.h index d3c9db492b30..fab5121ffb8f 100644 --- a/include/linux/mlx5/eswitch.h +++ b/include/linux/mlx5/eswitch.h @@ -8,6 +8,8 @@ #include +#define MLX5_ESWITCH_MANAGER(mdev) MLX5_CAP_GEN(mdev, eswitch_manager) + enum { SRIOV_NONE, SRIOV_LEGACY, diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 27134c4fcb76..ac281f5ec9b8 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -922,7 +922,7 @@ struct mlx5_ifc_cmd_hca_cap_bits { u8 vnic_env_queue_counters[0x1]; u8 ets[0x1]; u8 nic_flow_table[0x1]; - u8 eswitch_flow_table[0x1]; + u8 eswitch_manager[0x1]; u8 device_memory[0x1]; u8 mcam_reg[0x1]; u8 pcam_reg[0x1]; -- cgit v1.2.3 From 733d3e5497070d05971352ca5087bac83c197c3d Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 31 May 2018 11:32:56 +0300 Subject: net/mlx5e: Avoid dealing with vport representors if not being e-switch manager In smartnic env, the host (PF) driver might not be an e-switch manager, hence the switchdev mode representors are running on the embedded cpu (EC) and not at the host. As such, we should avoid dealing with vport representors if not being esw manager. While here, make sure to disallow eswitch switchdev related setups through devlink if we are not esw managers. Fixes: cb67b832921c ('net/mlx5e: Introduce SRIOV VF representors') Signed-off-by: Or Gerlitz Reviewed-by: Eli Cohen Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 12 ++++++------ drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 4 ++-- 3 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 56c1b6f5593e..dae4156a710d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2846,7 +2846,7 @@ void mlx5e_activate_priv_channels(struct mlx5e_priv *priv) mlx5e_activate_channels(&priv->channels); netif_tx_start_all_queues(priv->netdev); - if (MLX5_VPORT_MANAGER(priv->mdev)) + if (MLX5_ESWITCH_MANAGER(priv->mdev)) mlx5e_add_sqs_fwd_rules(priv); mlx5e_wait_channels_min_rx_wqes(&priv->channels); @@ -2857,7 +2857,7 @@ void mlx5e_deactivate_priv_channels(struct mlx5e_priv *priv) { mlx5e_redirect_rqts_to_drop(priv); - if (MLX5_VPORT_MANAGER(priv->mdev)) + if (MLX5_ESWITCH_MANAGER(priv->mdev)) mlx5e_remove_sqs_fwd_rules(priv); /* FIXME: This is a W/A only for tx timeout watch dog false alarm when @@ -4597,7 +4597,7 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev) mlx5e_set_netdev_dev_addr(netdev); #if IS_ENABLED(CONFIG_MLX5_ESWITCH) - if (MLX5_VPORT_MANAGER(mdev)) + if (MLX5_ESWITCH_MANAGER(mdev)) netdev->switchdev_ops = &mlx5e_switchdev_ops; #endif @@ -4753,7 +4753,7 @@ static void mlx5e_nic_enable(struct mlx5e_priv *priv) mlx5e_enable_async_events(priv); - if (MLX5_VPORT_MANAGER(priv->mdev)) + if (MLX5_ESWITCH_MANAGER(priv->mdev)) mlx5e_register_vport_reps(priv); if (netdev->reg_state != NETREG_REGISTERED) @@ -4788,7 +4788,7 @@ static void mlx5e_nic_disable(struct mlx5e_priv *priv) queue_work(priv->wq, &priv->set_rx_mode_work); - if (MLX5_VPORT_MANAGER(priv->mdev)) + if (MLX5_ESWITCH_MANAGER(priv->mdev)) mlx5e_unregister_vport_reps(priv); mlx5e_disable_async_events(priv); @@ -4972,7 +4972,7 @@ static void *mlx5e_add(struct mlx5_core_dev *mdev) return NULL; #ifdef CONFIG_MLX5_ESWITCH - if (MLX5_VPORT_MANAGER(mdev)) { + if (MLX5_ESWITCH_MANAGER(mdev)) { rpriv = mlx5e_alloc_nic_rep_priv(mdev); if (!rpriv) { mlx5_core_warn(mdev, "Failed to alloc NIC rep priv data\n"); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 60236f73373c..2b8040a3cdbd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -823,7 +823,7 @@ bool mlx5e_is_uplink_rep(struct mlx5e_priv *priv) struct mlx5e_rep_priv *rpriv = priv->ppriv; struct mlx5_eswitch_rep *rep; - if (!MLX5_CAP_GEN(priv->mdev, vport_group_manager)) + if (!MLX5_ESWITCH_MANAGER(priv->mdev)) return false; rep = rpriv->rep; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index cecd201f0b73..91f1209886ff 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -1079,8 +1079,8 @@ static int mlx5_devlink_eswitch_check(struct devlink *devlink) if (MLX5_CAP_GEN(dev, port_type) != MLX5_CAP_PORT_TYPE_ETH) return -EOPNOTSUPP; - if (!MLX5_CAP_GEN(dev, vport_group_manager)) - return -EOPNOTSUPP; + if(!MLX5_ESWITCH_MANAGER(dev)) + return -EPERM; if (dev->priv.eswitch->mode == SRIOV_NONE) return -EOPNOTSUPP; -- cgit v1.2.3 From aff2252a2ad3844ca47bf2f18af071101baace40 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 31 May 2018 11:40:17 +0300 Subject: IB/mlx5: Avoid dealing with vport representors if not being e-switch manager In smartnic env, the host (PF) driver might not be an e-switch manager, hence the switchdev mode representors are running on the embedded cpu (EC) and not at the host. As such, we should avoid dealing with vport representors if not being esw manager. Fixes: b5ca15ad7e61 ('IB/mlx5: Add proper representors support') Signed-off-by: Or Gerlitz Reviewed-by: Eli Cohen Signed-off-by: Saeed Mahameed --- drivers/infiniband/hw/mlx5/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index e52dd21519b4..634be96dcb86 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -6107,7 +6107,7 @@ static void *mlx5_ib_add(struct mlx5_core_dev *mdev) dev->num_ports = max(MLX5_CAP_GEN(mdev, num_ports), MLX5_CAP_GEN(mdev, num_vhca_ports)); - if (MLX5_VPORT_MANAGER(mdev) && + if (MLX5_ESWITCH_MANAGER(mdev) && mlx5_ib_eswitch_mode(mdev->priv.eswitch) == SRIOV_OFFLOADS) { dev->rep = mlx5_ib_vport_rep(mdev->priv.eswitch, 0); -- cgit v1.2.3 From a8d70a054a718b63058b3d3ac58b6181815e4289 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Thu, 31 May 2018 12:24:48 +0300 Subject: net/mlx5: E-Switch, Disallow vlan/spoofcheck setup if not being esw manager In smartnic env, if the host (PF) driver is not an e-switch manager, we are not allowed to apply eswitch ports setups such as vlan (VST), spoof-checks, min/max rate or state. Make sure we are eswitch manager when coming to issue these callbacks and err otherwise. Also fix the definition of ESW_ALLOWED to rely on eswitch_manager capability and on the vport_group_manger. Operations on the VF nic vport context, such as setting a mac or reading the vport counters are allowed to the PF in this scheme. The modify nic vport guid code was modified to omit checking the nic_vport_node_guid_modify eswitch capability. The reason for doing so is that modifying node guid requires vport group manager capability, and there's no need to check further capabilities. 1. set_vf_vlan - disallowed 2. set_vf_spoofchk - disallowed 3. set_vf_mac - allowed 4. get_vf_config - allowed 5. set_vf_trust - disallowed 6. set_vf_rate - disallowed 7. get_vf_stat - allowed 8. set_vf_link_state - disallowed Fixes: f942380c1239 ('net/mlx5: E-Switch, Vport ingress/egress ACLs rules for spoofchk') Signed-off-by: Eli Cohen Reviewed-by: Or Gerlitz Tested-by: Or Gerlitz --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 12 +++++------- drivers/net/ethernet/mellanox/mlx5/core/vport.c | 2 -- 2 files changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index 103fd6a0cc65..b79d74860a30 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -1594,17 +1594,15 @@ static void esw_disable_vport(struct mlx5_eswitch *esw, int vport_num) } /* Public E-Switch API */ -#define ESW_ALLOWED(esw) ((esw) && MLX5_VPORT_MANAGER((esw)->dev)) +#define ESW_ALLOWED(esw) ((esw) && MLX5_ESWITCH_MANAGER((esw)->dev)) + int mlx5_eswitch_enable_sriov(struct mlx5_eswitch *esw, int nvfs, int mode) { int err; int i, enabled_events; - if (!ESW_ALLOWED(esw)) - return 0; - - if (!MLX5_ESWITCH_MANAGER(esw->dev) || + if (!ESW_ALLOWED(esw) || !MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, ft_support)) { esw_warn(esw->dev, "E-Switch FDB is not supported, aborting ...\n"); return -EOPNOTSUPP; @@ -1806,7 +1804,7 @@ int mlx5_eswitch_set_vport_mac(struct mlx5_eswitch *esw, u64 node_guid; int err = 0; - if (!ESW_ALLOWED(esw)) + if (!MLX5_CAP_GEN(esw->dev, vport_group_manager)) return -EPERM; if (!LEGAL_VPORT(esw, vport) || is_multicast_ether_addr(mac)) return -EINVAL; @@ -1883,7 +1881,7 @@ int mlx5_eswitch_get_vport_config(struct mlx5_eswitch *esw, { struct mlx5_vport *evport; - if (!ESW_ALLOWED(esw)) + if (!MLX5_CAP_GEN(esw->dev, vport_group_manager)) return -EPERM; if (!LEGAL_VPORT(esw, vport)) return -EINVAL; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vport.c b/drivers/net/ethernet/mellanox/mlx5/core/vport.c index 719cecb182c6..7eecd5b07bb1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vport.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/vport.c @@ -549,8 +549,6 @@ int mlx5_modify_nic_vport_node_guid(struct mlx5_core_dev *mdev, return -EINVAL; if (!MLX5_CAP_GEN(mdev, vport_group_manager)) return -EACCES; - if (!MLX5_CAP_ESW(mdev, nic_vport_node_guid_modify)) - return -EOPNOTSUPP; in = kvzalloc(inlen, GFP_KERNEL); if (!in) -- cgit v1.2.3 From f811980444ec59ad62f9e041adbb576a821132c7 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 13 Jun 2018 10:27:34 +0300 Subject: net/mlx5: Fix required capability for manipulating MPFS Manipulating of the MPFS requires eswitch manager capabilities. Fixes: eeb66cdb6826 ('net/mlx5: Separate between E-Switch and MPFS') Signed-off-by: Eli Cohen Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c index 7cb67122e8b5..98359559c77e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c @@ -33,6 +33,7 @@ #include #include #include +#include #include "mlx5_core.h" #include "lib/mpfs.h" @@ -98,7 +99,7 @@ int mlx5_mpfs_init(struct mlx5_core_dev *dev) int l2table_size = 1 << MLX5_CAP_GEN(dev, log_max_l2_table); struct mlx5_mpfs *mpfs; - if (!MLX5_VPORT_MANAGER(dev)) + if (!MLX5_ESWITCH_MANAGER(dev)) return 0; mpfs = kzalloc(sizeof(*mpfs), GFP_KERNEL); @@ -122,7 +123,7 @@ void mlx5_mpfs_cleanup(struct mlx5_core_dev *dev) { struct mlx5_mpfs *mpfs = dev->priv.mpfs; - if (!MLX5_VPORT_MANAGER(dev)) + if (!MLX5_ESWITCH_MANAGER(dev)) return; WARN_ON(!hlist_empty(mpfs->hash)); @@ -137,7 +138,7 @@ int mlx5_mpfs_add_mac(struct mlx5_core_dev *dev, u8 *mac) u32 index; int err; - if (!MLX5_VPORT_MANAGER(dev)) + if (!MLX5_ESWITCH_MANAGER(dev)) return 0; mutex_lock(&mpfs->lock); @@ -179,7 +180,7 @@ int mlx5_mpfs_del_mac(struct mlx5_core_dev *dev, u8 *mac) int err = 0; u32 index; - if (!MLX5_VPORT_MANAGER(dev)) + if (!MLX5_ESWITCH_MANAGER(dev)) return 0; mutex_lock(&mpfs->lock); -- cgit v1.2.3 From d14fcb8d877caf1b8d6bd65d444bf62b21f2070c Mon Sep 17 00:00:00 2001 From: Shay Agroskin Date: Tue, 22 May 2018 14:14:02 +0300 Subject: net/mlx5: Fix wrong size allocation for QoS ETC TC regitster The driver allocates wrong size (due to wrong struct name) when issuing a query/set request to NIC's register. Fixes: d8880795dabf ("net/mlx5e: Implement DCBNL IEEE max rate") Signed-off-by: Shay Agroskin Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/port.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c index fa9d0760dd36..31a9cbd85689 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c @@ -701,7 +701,7 @@ EXPORT_SYMBOL_GPL(mlx5_query_port_prio_tc); static int mlx5_set_port_qetcr_reg(struct mlx5_core_dev *mdev, u32 *in, int inlen) { - u32 out[MLX5_ST_SZ_DW(qtct_reg)]; + u32 out[MLX5_ST_SZ_DW(qetc_reg)]; if (!MLX5_CAP_GEN(mdev, ets)) return -EOPNOTSUPP; @@ -713,7 +713,7 @@ static int mlx5_set_port_qetcr_reg(struct mlx5_core_dev *mdev, u32 *in, static int mlx5_query_port_qetcr_reg(struct mlx5_core_dev *mdev, u32 *out, int outlen) { - u32 in[MLX5_ST_SZ_DW(qtct_reg)]; + u32 in[MLX5_ST_SZ_DW(qetc_reg)]; if (!MLX5_CAP_GEN(mdev, ets)) return -EOPNOTSUPP; -- cgit v1.2.3 From 603b7bcff824740500ddfa001d7a7168b0b38542 Mon Sep 17 00:00:00 2001 From: Alex Vesker Date: Fri, 25 May 2018 20:25:59 +0300 Subject: net/mlx5: Fix incorrect raw command length parsing The NULL character was not set correctly for the string containing the command length, this caused failures reading the output of the command due to a random length. The fix is to initialize the output length string. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Alex Vesker Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index 487388aed98f..2db5fe571594 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -1276,7 +1276,7 @@ static ssize_t outlen_write(struct file *filp, const char __user *buf, { struct mlx5_core_dev *dev = filp->private_data; struct mlx5_cmd_debug *dbg = &dev->cmd.dbg; - char outlen_str[8]; + char outlen_str[8] = {0}; int outlen; void *ptr; int err; @@ -1291,8 +1291,6 @@ static ssize_t outlen_write(struct file *filp, const char __user *buf, if (copy_from_user(outlen_str, buf, count)) return -EFAULT; - outlen_str[7] = 0; - err = sscanf(outlen_str, "%d", &outlen); if (err < 0) return err; -- cgit v1.2.3 From d412c31dae053bf30a1bc15582a9990df297a660 Mon Sep 17 00:00:00 2001 From: Alex Vesker Date: Tue, 12 Jun 2018 16:14:31 +0300 Subject: net/mlx5: Fix command interface race in polling mode The command interface can work in two modes: Events and Polling. In the general case, each time we invoke a command, a work is queued to handle it. When working in events, the interrupt handler completes the command execution. On the other hand, when working in polling mode, the work itself completes it. Due to a bug in the work handler, a command could have been completed by the interrupt handler, while the work handler hasn't finished yet, causing the it to complete once again if the command interface mode was changed from Events to polling after the interrupt handler was called. mlx5_unload_one() mlx5_stop_eqs() // Destroy the EQ before cmd EQ ...cmd_work_handler() write_doorbell() --> EVENT_TYPE_CMD mlx5_cmd_comp_handler() // First free free_ent(cmd, ent->idx) complete(&ent->done) <-- mlx5_stop_eqs //cmd was complete // move to polling before destroying the last cmd EQ mlx5_cmd_use_polling() cmd->mode = POLL; --> cmd_work_handler (continues) if (cmd->mode == POLL) mlx5_cmd_comp_handler() // Double free The solution is to store the cmd->mode before writing the doorbell. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Alex Vesker Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index 2db5fe571594..384c1fa49081 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -807,6 +807,7 @@ static void cmd_work_handler(struct work_struct *work) unsigned long flags; bool poll_cmd = ent->polling; int alloc_ret; + int cmd_mode; sem = ent->page_queue ? &cmd->pages_sem : &cmd->sem; down(sem); @@ -853,6 +854,7 @@ static void cmd_work_handler(struct work_struct *work) set_signature(ent, !cmd->checksum_disabled); dump_command(dev, ent, 1); ent->ts1 = ktime_get_ns(); + cmd_mode = cmd->mode; if (ent->callback) schedule_delayed_work(&ent->cb_timeout_work, cb_timeout); @@ -877,7 +879,7 @@ static void cmd_work_handler(struct work_struct *work) iowrite32be(1 << ent->idx, &dev->iseg->cmd_dbell); mmiowb(); /* if not in polling don't use ent after this point */ - if (cmd->mode == CMD_MODE_POLLING || poll_cmd) { + if (cmd_mode == CMD_MODE_POLLING || poll_cmd) { poll_timeout(ent); /* make sure we read the descriptor after ownership is SW */ rmb(); -- cgit v1.2.3 From 03ae3a9caf4a59edd32b65c89c375a98ce3ea1ef Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 25 Jun 2018 12:02:40 -0700 Subject: Input: psmouse - fix button reporting for basic protocols The commit ba667650c568 ("Input: psmouse - clean up code") was pretty brain-dead and broke extra buttons reporting for variety of PS/2 mice: Genius, Thinkmouse and Intellimouse Explorer. We need to actually inspect the data coming from the device when reporting events. Fixes: ba667650c568 ("Input: psmouse - clean up code") Reported-by: Jiri Slaby Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/psmouse-base.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 5ff5b1952be0..d3ff1fc09af7 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -192,8 +192,8 @@ psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) else input_report_rel(dev, REL_WHEEL, -wheel); - input_report_key(dev, BTN_SIDE, BIT(4)); - input_report_key(dev, BTN_EXTRA, BIT(5)); + input_report_key(dev, BTN_SIDE, packet[3] & BIT(4)); + input_report_key(dev, BTN_EXTRA, packet[3] & BIT(5)); break; } break; @@ -203,13 +203,13 @@ psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) input_report_rel(dev, REL_WHEEL, -(s8) packet[3]); /* Extra buttons on Genius NewNet 3D */ - input_report_key(dev, BTN_SIDE, BIT(6)); - input_report_key(dev, BTN_EXTRA, BIT(7)); + input_report_key(dev, BTN_SIDE, packet[0] & BIT(6)); + input_report_key(dev, BTN_EXTRA, packet[0] & BIT(7)); break; case PSMOUSE_THINKPS: /* Extra button on ThinkingMouse */ - input_report_key(dev, BTN_EXTRA, BIT(3)); + input_report_key(dev, BTN_EXTRA, packet[0] & BIT(3)); /* * Without this bit of weirdness moving up gives wildly @@ -223,7 +223,7 @@ psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) * Cortron PS2 Trackball reports SIDE button in the * 4th bit of the first byte. */ - input_report_key(dev, BTN_SIDE, BIT(3)); + input_report_key(dev, BTN_SIDE, packet[0] & BIT(3)); packet[0] |= BIT(3); break; -- cgit v1.2.3 From c809195f5523dd4d09403bbb1c9732d548aa0d1e Mon Sep 17 00:00:00 2001 From: Sowmini Varadhan Date: Mon, 25 Jun 2018 06:41:25 -0700 Subject: rds: clean up loopback rds_connections on netns deletion The RDS core module creates rds_connections based on callbacks from rds_loop_transport when sending/receiving packets to local addresses. These connections will need to be cleaned up when they are created from a netns that is not init_net, and that netns is deleted. Add the changes aligned with the changes from commit ebeeb1ad9b8a ("rds: tcp: use rds_destroy_pending() to synchronize netns/module teardown and rds connection/workq management") for rds_loop_transport Reported-and-tested-by: syzbot+4c20b3866171ce8441d2@syzkaller.appspotmail.com Acked-by: Santosh Shilimkar Signed-off-by: Sowmini Varadhan Signed-off-by: David S. Miller --- net/rds/connection.c | 11 ++++++++++- net/rds/loop.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++++++++ net/rds/loop.h | 2 ++ 3 files changed, 68 insertions(+), 1 deletion(-) diff --git a/net/rds/connection.c b/net/rds/connection.c index abef75da89a7..cfb05953b0e5 100644 --- a/net/rds/connection.c +++ b/net/rds/connection.c @@ -659,11 +659,19 @@ static void rds_conn_info(struct socket *sock, unsigned int len, int rds_conn_init(void) { + int ret; + + ret = rds_loop_net_init(); /* register pernet callback */ + if (ret) + return ret; + rds_conn_slab = kmem_cache_create("rds_connection", sizeof(struct rds_connection), 0, 0, NULL); - if (!rds_conn_slab) + if (!rds_conn_slab) { + rds_loop_net_exit(); return -ENOMEM; + } rds_info_register_func(RDS_INFO_CONNECTIONS, rds_conn_info); rds_info_register_func(RDS_INFO_SEND_MESSAGES, @@ -676,6 +684,7 @@ int rds_conn_init(void) void rds_conn_exit(void) { + rds_loop_net_exit(); /* unregister pernet callback */ rds_loop_exit(); WARN_ON(!hlist_empty(rds_conn_hash)); diff --git a/net/rds/loop.c b/net/rds/loop.c index dac6218a460e..feea1f96ee2a 100644 --- a/net/rds/loop.c +++ b/net/rds/loop.c @@ -33,6 +33,8 @@ #include #include #include +#include +#include #include "rds_single_path.h" #include "rds.h" @@ -40,6 +42,17 @@ static DEFINE_SPINLOCK(loop_conns_lock); static LIST_HEAD(loop_conns); +static atomic_t rds_loop_unloading = ATOMIC_INIT(0); + +static void rds_loop_set_unloading(void) +{ + atomic_set(&rds_loop_unloading, 1); +} + +static bool rds_loop_is_unloading(struct rds_connection *conn) +{ + return atomic_read(&rds_loop_unloading) != 0; +} /* * This 'loopback' transport is a special case for flows that originate @@ -165,6 +178,8 @@ void rds_loop_exit(void) struct rds_loop_connection *lc, *_lc; LIST_HEAD(tmp_list); + rds_loop_set_unloading(); + synchronize_rcu(); /* avoid calling conn_destroy with irqs off */ spin_lock_irq(&loop_conns_lock); list_splice(&loop_conns, &tmp_list); @@ -177,6 +192,46 @@ void rds_loop_exit(void) } } +static void rds_loop_kill_conns(struct net *net) +{ + struct rds_loop_connection *lc, *_lc; + LIST_HEAD(tmp_list); + + spin_lock_irq(&loop_conns_lock); + list_for_each_entry_safe(lc, _lc, &loop_conns, loop_node) { + struct net *c_net = read_pnet(&lc->conn->c_net); + + if (net != c_net) + continue; + list_move_tail(&lc->loop_node, &tmp_list); + } + spin_unlock_irq(&loop_conns_lock); + + list_for_each_entry_safe(lc, _lc, &tmp_list, loop_node) { + WARN_ON(lc->conn->c_passive); + rds_conn_destroy(lc->conn); + } +} + +static void __net_exit rds_loop_exit_net(struct net *net) +{ + rds_loop_kill_conns(net); +} + +static struct pernet_operations rds_loop_net_ops = { + .exit = rds_loop_exit_net, +}; + +int rds_loop_net_init(void) +{ + return register_pernet_device(&rds_loop_net_ops); +} + +void rds_loop_net_exit(void) +{ + unregister_pernet_device(&rds_loop_net_ops); +} + /* * This is missing .xmit_* because loop doesn't go through generic * rds_send_xmit() and doesn't call rds_recv_incoming(). .listen_stop and @@ -194,4 +249,5 @@ struct rds_transport rds_loop_transport = { .inc_free = rds_loop_inc_free, .t_name = "loopback", .t_type = RDS_TRANS_LOOP, + .t_unloading = rds_loop_is_unloading, }; diff --git a/net/rds/loop.h b/net/rds/loop.h index 469fa4b2da4f..bbc8cdd030df 100644 --- a/net/rds/loop.h +++ b/net/rds/loop.h @@ -5,6 +5,8 @@ /* loop.c */ extern struct rds_transport rds_loop_transport; +int rds_loop_net_init(void); +void rds_loop_net_exit(void); void rds_loop_exit(void); #endif -- cgit v1.2.3 From 7c8f4e6dc30996bff806285730a0bb4e714d3d52 Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Tue, 26 Jun 2018 01:39:32 +0200 Subject: fib_rules: match rules based on suppress_* properties too Two rules with different values of suppress_prefix or suppress_ifgroup are not the same. This fixes an -EEXIST when running: $ ip -4 rule add table main suppress_prefixlength 0 Signed-off-by: Jason A. Donenfeld Fixes: f9d4b0c1e969 ("fib_rules: move common handling of newrule delrule msgs into fib_nl2rule") Signed-off-by: David S. Miller --- net/core/fib_rules.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c index 126ffc5bc630..bc8425d81022 100644 --- a/net/core/fib_rules.c +++ b/net/core/fib_rules.c @@ -416,6 +416,14 @@ static struct fib_rule *rule_find(struct fib_rules_ops *ops, if (rule->mark && r->mark != rule->mark) continue; + if (rule->suppress_ifgroup != -1 && + r->suppress_ifgroup != rule->suppress_ifgroup) + continue; + + if (rule->suppress_prefixlen != -1 && + r->suppress_prefixlen != rule->suppress_prefixlen) + continue; + if (rule->mark_mask && r->mark_mask != rule->mark_mask) continue; -- cgit v1.2.3 From a64119415ff248efa61301783bc26551df5dabf6 Mon Sep 17 00:00:00 2001 From: Pieter Jansen van Vuuren Date: Mon, 25 Jun 2018 20:36:27 -0700 Subject: nfp: flower: fix mpls ether type detection Previously it was not possible to distinguish between mpls ether types and other ether types. This leads to incorrect classification of offloaded filters that match on mpls ether type. For example the following two filters overlap: # tc filter add dev eth0 parent ffff: \ protocol 0x8847 flower \ action mirred egress redirect dev eth1 # tc filter add dev eth0 parent ffff: \ protocol 0x0800 flower \ action mirred egress redirect dev eth2 The driver now correctly includes the mac_mpls layer where HW stores mpls fields, when it detects an mpls ether type. It also sets the MPLS_Q bit to indicate that the filter should match mpls packets. Fixes: bb055c198d9b ("nfp: add mpls match offloading support") Signed-off-by: Pieter Jansen van Vuuren Reviewed-by: Simon Horman Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/flower/match.c | 14 ++++++++++++++ drivers/net/ethernet/netronome/nfp/flower/offload.c | 8 ++++++++ 2 files changed, 22 insertions(+) diff --git a/drivers/net/ethernet/netronome/nfp/flower/match.c b/drivers/net/ethernet/netronome/nfp/flower/match.c index 91935405f586..84f7a5dbea9d 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/match.c +++ b/drivers/net/ethernet/netronome/nfp/flower/match.c @@ -123,6 +123,20 @@ nfp_flower_compile_mac(struct nfp_flower_mac_mpls *frame, NFP_FLOWER_MASK_MPLS_Q; frame->mpls_lse = cpu_to_be32(t_mpls); + } else if (dissector_uses_key(flow->dissector, + FLOW_DISSECTOR_KEY_BASIC)) { + /* Check for mpls ether type and set NFP_FLOWER_MASK_MPLS_Q + * bit, which indicates an mpls ether type but without any + * mpls fields. + */ + struct flow_dissector_key_basic *key_basic; + + key_basic = skb_flow_dissector_target(flow->dissector, + FLOW_DISSECTOR_KEY_BASIC, + flow->key); + if (key_basic->n_proto == cpu_to_be16(ETH_P_MPLS_UC) || + key_basic->n_proto == cpu_to_be16(ETH_P_MPLS_MC)) + frame->mpls_lse = cpu_to_be32(NFP_FLOWER_MASK_MPLS_Q); } } diff --git a/drivers/net/ethernet/netronome/nfp/flower/offload.c b/drivers/net/ethernet/netronome/nfp/flower/offload.c index c42e64f32333..477f584f6d28 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/offload.c +++ b/drivers/net/ethernet/netronome/nfp/flower/offload.c @@ -264,6 +264,14 @@ nfp_flower_calculate_key_layers(struct nfp_app *app, case cpu_to_be16(ETH_P_ARP): return -EOPNOTSUPP; + case cpu_to_be16(ETH_P_MPLS_UC): + case cpu_to_be16(ETH_P_MPLS_MC): + if (!(key_layer & NFP_FLOWER_LAYER_MAC)) { + key_layer |= NFP_FLOWER_LAYER_MAC; + key_size += sizeof(struct nfp_flower_mac_mpls); + } + break; + /* Will be included in layer 2. */ case cpu_to_be16(ETH_P_8021Q): break; -- cgit v1.2.3 From 951a8ee6def39e25d0e60b9394e5a249ba8b2390 Mon Sep 17 00:00:00 2001 From: John Hurley Date: Mon, 25 Jun 2018 20:36:28 -0700 Subject: nfp: reject binding to shared blocks TC shared blocks allow multiple qdiscs to be grouped together and filters shared between them. Currently the chains of filters attached to a block are only flushed when the block is removed. If a qdisc is removed from a block but the block still exists, flow del messages are not passed to the callback registered for that qdisc. For the NFP, this presents the possibility of rules still existing in hw when they should be removed. Prevent binding to shared blocks until the kernel can send per qdisc del messages when block unbinds occur. tcf_block_shared() was not used outside of the core until now, so also add an empty implementation for builds with CONFIG_NET_CLS=n. Fixes: 4861738775d7 ("net: sched: introduce shared filter blocks infrastructure") Signed-off-by: John Hurley Signed-off-by: Jakub Kicinski Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/bpf/main.c | 3 +++ drivers/net/ethernet/netronome/nfp/flower/offload.c | 3 +++ include/net/pkt_cls.h | 5 +++++ 3 files changed, 11 insertions(+) diff --git a/drivers/net/ethernet/netronome/nfp/bpf/main.c b/drivers/net/ethernet/netronome/nfp/bpf/main.c index fcdfb8e7fdea..6b15e3b11956 100644 --- a/drivers/net/ethernet/netronome/nfp/bpf/main.c +++ b/drivers/net/ethernet/netronome/nfp/bpf/main.c @@ -202,6 +202,9 @@ static int nfp_bpf_setup_tc_block(struct net_device *netdev, if (f->binder_type != TCF_BLOCK_BINDER_TYPE_CLSACT_INGRESS) return -EOPNOTSUPP; + if (tcf_block_shared(f->block)) + return -EOPNOTSUPP; + switch (f->command) { case TC_BLOCK_BIND: return tcf_block_cb_register(f->block, diff --git a/drivers/net/ethernet/netronome/nfp/flower/offload.c b/drivers/net/ethernet/netronome/nfp/flower/offload.c index 477f584f6d28..525057bee0ed 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/offload.c +++ b/drivers/net/ethernet/netronome/nfp/flower/offload.c @@ -631,6 +631,9 @@ static int nfp_flower_setup_tc_block(struct net_device *netdev, if (f->binder_type != TCF_BLOCK_BINDER_TYPE_CLSACT_INGRESS) return -EOPNOTSUPP; + if (tcf_block_shared(f->block)) + return -EOPNOTSUPP; + switch (f->command) { case TC_BLOCK_BIND: return tcf_block_cb_register(f->block, diff --git a/include/net/pkt_cls.h b/include/net/pkt_cls.h index a3c1a2c47cd4..20b059574e60 100644 --- a/include/net/pkt_cls.h +++ b/include/net/pkt_cls.h @@ -111,6 +111,11 @@ void tcf_block_put_ext(struct tcf_block *block, struct Qdisc *q, { } +static inline bool tcf_block_shared(struct tcf_block *block) +{ + return false; +} + static inline struct Qdisc *tcf_block_q(struct tcf_block *block) { return NULL; -- cgit v1.2.3 From 22db552b50fa11d8c1d171de908a1f9ef62172b7 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 19 Jun 2018 16:02:27 +0200 Subject: powerpc/powermac: Fix rtc read/write functions As Mathieu pointed out, my conversion to time64_t was incorrect and resulted in negative times to be read from the RTC. The problem is that during the conversion from a byte array to a time64_t, the 'unsigned char' variable holding the top byte gets turned into a negative signed 32-bit integer before being assigned to the 64-bit variable for any times after 1972. This changes the logic to cast to an unsigned 32-bit number first for the Macintosh time and then convert that to the Unix time, which then gives us a time in the documented 1904..2040 year range. I decided not to use the longer 1970..2106 range that other drivers use, for consistency with the literal interpretation of the register, but that could be easily changed if we decide we want to support any Mac after 2040. Just to be on the safe side, I'm also adding a WARN_ON that will trigger if either the year 2040 has come and is observed by this driver, or we run into an RTC that got set back to a pre-1970 date for some reason (the two are indistinguishable). For the RTC write functions, Andreas found another problem: both pmu_request() and cuda_request() are varargs functions, so changing the type of the arguments passed into them from 32 bit to 64 bit breaks the API for the set_rtc_time functions. This changes it back to 32 bits. The same code exists in arch/m68k/ and is patched in an identical way now in a separate patch. Fixes: 5bfd643583b2 ("powerpc: use time64_t in read_persistent_clock") Reported-by: Mathieu Malaterre Reported-by: Andreas Schwab Signed-off-by: Arnd Bergmann Tested-by: Mathieu Malaterre Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/powermac/time.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index 7c968e46736f..12e6e4d30602 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -42,7 +42,11 @@ #define DBG(x...) #endif -/* Apparently the RTC stores seconds since 1 Jan 1904 */ +/* + * Offset between Unix time (1970-based) and Mac time (1904-based). Cuda and PMU + * times wrap in 2040. If we need to handle later times, the read_time functions + * need to be changed to interpret wrapped times as post-2040. + */ #define RTC_OFFSET 2082844800 /* @@ -97,8 +101,11 @@ static time64_t cuda_get_time(void) if (req.reply_len != 7) printk(KERN_ERR "cuda_get_time: got %d byte reply\n", req.reply_len); - now = (req.reply[3] << 24) + (req.reply[4] << 16) - + (req.reply[5] << 8) + req.reply[6]; + now = (u32)((req.reply[3] << 24) + (req.reply[4] << 16) + + (req.reply[5] << 8) + req.reply[6]); + /* it's either after year 2040, or the RTC has gone backwards */ + WARN_ON(now < RTC_OFFSET); + return now - RTC_OFFSET; } @@ -106,10 +113,10 @@ static time64_t cuda_get_time(void) static int cuda_set_rtc_time(struct rtc_time *tm) { - time64_t nowtime; + u32 nowtime; struct adb_request req; - nowtime = rtc_tm_to_time64(tm) + RTC_OFFSET; + nowtime = lower_32_bits(rtc_tm_to_time64(tm) + RTC_OFFSET); if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME, nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0) @@ -140,8 +147,12 @@ static time64_t pmu_get_time(void) if (req.reply_len != 4) printk(KERN_ERR "pmu_get_time: got %d byte reply from PMU\n", req.reply_len); - now = (req.reply[0] << 24) + (req.reply[1] << 16) - + (req.reply[2] << 8) + req.reply[3]; + now = (u32)((req.reply[0] << 24) + (req.reply[1] << 16) + + (req.reply[2] << 8) + req.reply[3]); + + /* it's either after year 2040, or the RTC has gone backwards */ + WARN_ON(now < RTC_OFFSET); + return now - RTC_OFFSET; } @@ -149,10 +160,10 @@ static time64_t pmu_get_time(void) static int pmu_set_rtc_time(struct rtc_time *tm) { - time64_t nowtime; + u32 nowtime; struct adb_request req; - nowtime = rtc_tm_to_time64(tm) + RTC_OFFSET; + nowtime = lower_32_bits(rtc_tm_to_time64(tm) + RTC_OFFSET); if (pmu_request(&req, NULL, 5, PMU_SET_RTC, nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0) return -ENXIO; -- cgit v1.2.3 From 2d2595719a97c876f35b1e60e5768e58753b268c Mon Sep 17 00:00:00 2001 From: Chengguang Xu Date: Tue, 26 Jun 2018 09:16:31 +0800 Subject: nfp: cast sizeof() to int when comparing with error code sizeof() will return unsigned value so in the error check negative error code will be always larger than sizeof(). Fixes: a0d8e02c35ff ("nfp: add support for reading nffw info") Signed-off-by: Chengguang Xu Acked-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nffw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nffw.c b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nffw.c index cd34097b79f1..37a6d7822a38 100644 --- a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nffw.c +++ b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nffw.c @@ -232,7 +232,7 @@ struct nfp_nffw_info *nfp_nffw_info_open(struct nfp_cpp *cpp) err = nfp_cpp_read(cpp, nfp_resource_cpp_id(state->res), nfp_resource_address(state->res), fwinf, sizeof(*fwinf)); - if (err < sizeof(*fwinf)) + if (err < (int)sizeof(*fwinf)) goto err_release; if (!nffw_res_flg_init_get(fwinf)) -- cgit v1.2.3 From 22cd978e598618e82c3c3348d2069184f6884182 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Tue, 26 Jun 2018 22:45:52 -0700 Subject: x86/entry/64/compat: Fix "x86/entry/64/compat: Preserve r8-r11 in int $0x80" Commit: 8bb2610bc496 ("x86/entry/64/compat: Preserve r8-r11 in int $0x80") was busted: my original patch had a minor conflict with some of the nospec changes, but "git apply" is very clever and silently accepted the patch by making the same changes to a different function in the same file. There was obviously a huge offset, but "git apply" for some reason doesn't feel any need to say so. Move the changes to the correct function. Now the test_syscall_vdso_32 selftests passes. If anyone cares to observe the original problem, try applying the patch at: https://lore.kernel.org/lkml/d4c4d9985fbe64f8c9e19291886453914b48caee.1523975710.git.luto@kernel.org/raw to the kernel at 316d097c4cd4e7f2ef50c40cff2db266593c4ec4: - "git am" and "git apply" accept the patch without any complaints at all - "patch -p1" at least prints out a message about the huge offset. Reported-by: zhijianx.li@intel.com Signed-off-by: Andy Lutomirski Cc: Arjan van de Ven Cc: Borislav Petkov Cc: Dan Williams Cc: Dave Hansen Cc: David Woodhouse Cc: Greg Kroah-Hartman Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: stable@vger.kernel.org #v4.17+ Fixes: 8bb2610bc496 ("x86/entry/64/compat: Preserve r8-r11 in int $0x80") Link: http://lkml.kernel.org/r/6012b922485401bc42676e804171ded262fc2ef2.1530078306.git.luto@kernel.org Signed-off-by: Ingo Molnar --- arch/x86/entry/entry_64_compat.S | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S index 9de7f1e1dede..7d0df78db727 100644 --- a/arch/x86/entry/entry_64_compat.S +++ b/arch/x86/entry/entry_64_compat.S @@ -84,13 +84,13 @@ ENTRY(entry_SYSENTER_compat) pushq %rdx /* pt_regs->dx */ pushq %rcx /* pt_regs->cx */ pushq $-ENOSYS /* pt_regs->ax */ - pushq %r8 /* pt_regs->r8 */ + pushq $0 /* pt_regs->r8 = 0 */ xorl %r8d, %r8d /* nospec r8 */ - pushq %r9 /* pt_regs->r9 */ + pushq $0 /* pt_regs->r9 = 0 */ xorl %r9d, %r9d /* nospec r9 */ - pushq %r10 /* pt_regs->r10 */ + pushq $0 /* pt_regs->r10 = 0 */ xorl %r10d, %r10d /* nospec r10 */ - pushq %r11 /* pt_regs->r11 */ + pushq $0 /* pt_regs->r11 = 0 */ xorl %r11d, %r11d /* nospec r11 */ pushq %rbx /* pt_regs->rbx */ xorl %ebx, %ebx /* nospec rbx */ @@ -374,13 +374,13 @@ ENTRY(entry_INT80_compat) pushq %rcx /* pt_regs->cx */ xorl %ecx, %ecx /* nospec cx */ pushq $-ENOSYS /* pt_regs->ax */ - pushq $0 /* pt_regs->r8 = 0 */ + pushq %r8 /* pt_regs->r8 */ xorl %r8d, %r8d /* nospec r8 */ - pushq $0 /* pt_regs->r9 = 0 */ + pushq %r9 /* pt_regs->r9 */ xorl %r9d, %r9d /* nospec r9 */ - pushq $0 /* pt_regs->r10 = 0 */ + pushq %r10 /* pt_regs->r10*/ xorl %r10d, %r10d /* nospec r10 */ - pushq $0 /* pt_regs->r11 = 0 */ + pushq %r11 /* pt_regs->r11 */ xorl %r11d, %r11d /* nospec r11 */ pushq %rbx /* pt_regs->rbx */ xorl %ebx, %ebx /* nospec rbx */ -- cgit v1.2.3 From ec348020566009d3da9b99f07c05814d13969c78 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Tue, 26 Jun 2018 22:17:17 -0700 Subject: selftests/x86/sigreturn/64: Fix spurious failures on AMD CPUs When I wrote the sigreturn test, I didn't realize that AMD's busted IRET behavior was different from Intel's busted IRET behavior: On AMD CPUs, the CPU leaks the high 32 bits of the kernel stack pointer to certain userspace contexts. Gee, thanks. There's very little the kernel can do about it. Modify the test so it passes. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/86e7fd3564497f657de30a36da4505799eebef01.1530076529.git.luto@kernel.org Signed-off-by: Ingo Molnar --- tools/testing/selftests/x86/sigreturn.c | 46 +++++++++++++++++++++------------ 1 file changed, 29 insertions(+), 17 deletions(-) diff --git a/tools/testing/selftests/x86/sigreturn.c b/tools/testing/selftests/x86/sigreturn.c index 246145b84a12..2559e2c01793 100644 --- a/tools/testing/selftests/x86/sigreturn.c +++ b/tools/testing/selftests/x86/sigreturn.c @@ -612,19 +612,38 @@ static int test_valid_sigreturn(int cs_bits, bool use_16bit_ss, int force_ss) greg_t req = requested_regs[i], res = resulting_regs[i]; if (i == REG_TRAPNO || i == REG_IP) continue; /* don't care */ - if (i == REG_SP) { - printf("\tSP: %llx -> %llx\n", (unsigned long long)req, - (unsigned long long)res); + if (i == REG_SP) { /* - * In many circumstances, the high 32 bits of rsp - * are zeroed. For example, we could be a real - * 32-bit program, or we could hit any of a number - * of poorly-documented IRET or segmented ESP - * oddities. If this happens, it's okay. + * If we were using a 16-bit stack segment, then + * the kernel is a bit stuck: IRET only restores + * the low 16 bits of ESP/RSP if SS is 16-bit. + * The kernel uses a hack to restore bits 31:16, + * but that hack doesn't help with bits 63:32. + * On Intel CPUs, bits 63:32 end up zeroed, and, on + * AMD CPUs, they leak the high bits of the kernel + * espfix64 stack pointer. There's very little that + * the kernel can do about it. + * + * Similarly, if we are returning to a 32-bit context, + * the CPU will often lose the high 32 bits of RSP. */ - if (res == (req & 0xFFFFFFFF)) - continue; /* OK; not expected to work */ + + if (res == req) + continue; + + if (cs_bits != 64 && ((res ^ req) & 0xFFFFFFFF) == 0) { + printf("[NOTE]\tSP: %llx -> %llx\n", + (unsigned long long)req, + (unsigned long long)res); + continue; + } + + printf("[FAIL]\tSP mismatch: requested 0x%llx; got 0x%llx\n", + (unsigned long long)requested_regs[i], + (unsigned long long)resulting_regs[i]); + nerrs++; + continue; } bool ignore_reg = false; @@ -663,13 +682,6 @@ static int test_valid_sigreturn(int cs_bits, bool use_16bit_ss, int force_ss) } if (requested_regs[i] != resulting_regs[i] && !ignore_reg) { - /* - * SP is particularly interesting here. The - * usual cause of failures is that we hit the - * nasty IRET case of returning to a 16-bit SS, - * in which case bits 16:31 of the *kernel* - * stack pointer persist in ESP. - */ printf("[FAIL]\tReg %d mismatch: requested 0x%llx; got 0x%llx\n", i, (unsigned long long)requested_regs[i], (unsigned long long)resulting_regs[i]); -- cgit v1.2.3 From e8a445dea219c32727016af14f847d2e8f7ebec8 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Tue, 26 Jun 2018 22:17:18 -0700 Subject: selftests/x86/sigreturn: Do minor cleanups We have short names for the requested and resulting register values. Use them instead of spelling out the whole register entry for each case. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/bb3bc1f923a2f6fe7912d22a1068fe29d6033d38.1530076529.git.luto@kernel.org Signed-off-by: Ingo Molnar --- tools/testing/selftests/x86/sigreturn.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/x86/sigreturn.c b/tools/testing/selftests/x86/sigreturn.c index 2559e2c01793..4d9dc3f2fd70 100644 --- a/tools/testing/selftests/x86/sigreturn.c +++ b/tools/testing/selftests/x86/sigreturn.c @@ -610,6 +610,7 @@ static int test_valid_sigreturn(int cs_bits, bool use_16bit_ss, int force_ss) */ for (int i = 0; i < NGREG; i++) { greg_t req = requested_regs[i], res = resulting_regs[i]; + if (i == REG_TRAPNO || i == REG_IP) continue; /* don't care */ @@ -673,18 +674,18 @@ static int test_valid_sigreturn(int cs_bits, bool use_16bit_ss, int force_ss) #endif /* Sanity check on the kernel */ - if (i == REG_CX && requested_regs[i] != resulting_regs[i]) { + if (i == REG_CX && req != res) { printf("[FAIL]\tCX (saved SP) mismatch: requested 0x%llx; got 0x%llx\n", - (unsigned long long)requested_regs[i], - (unsigned long long)resulting_regs[i]); + (unsigned long long)req, + (unsigned long long)res); nerrs++; continue; } - if (requested_regs[i] != resulting_regs[i] && !ignore_reg) { + if (req != res && !ignore_reg) { printf("[FAIL]\tReg %d mismatch: requested 0x%llx; got 0x%llx\n", - i, (unsigned long long)requested_regs[i], - (unsigned long long)resulting_regs[i]); + i, (unsigned long long)req, + (unsigned long long)res); nerrs++; } } -- cgit v1.2.3 From cfe19577047e74cdac5826adbdc2337d8437f8fb Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Mon, 25 Jun 2018 15:08:52 +0300 Subject: x86/efi: Fix efi_call_phys_epilog() with CONFIG_X86_5LEVEL=y Open-coded page table entry checks don't work correctly when we fold the page table level at runtime. pgd_present() on 4-level paging machine always returns true, but open-coded version of the check may return false-negative result and we silently skip the rest of the loop body in efi_call_phys_epilog(). Replace open-coded checks with proper helpers. Signed-off-by: Kirill A. Shutemov Acked-by: Ard Biesheuvel Cc: Andrey Ryabinin Cc: Baoquan He Cc: Linus Torvalds Cc: Matt Fleming Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: stable@vger.kernel.org # v4.12+ Fixes: 94133e46a0f5 ("x86/efi: Correct EFI identity mapping under 'efi=old_map' when KASLR is enabled") Link: http://lkml.kernel.org/r/20180625120852.18300-1-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/platform/efi/efi_64.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index e01f7ceb9e7a..77873ce700ae 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -166,14 +166,14 @@ void __init efi_call_phys_epilog(pgd_t *save_pgd) pgd = pgd_offset_k(pgd_idx * PGDIR_SIZE); set_pgd(pgd_offset_k(pgd_idx * PGDIR_SIZE), save_pgd[pgd_idx]); - if (!(pgd_val(*pgd) & _PAGE_PRESENT)) + if (!pgd_present(*pgd)) continue; for (i = 0; i < PTRS_PER_P4D; i++) { p4d = p4d_offset(pgd, pgd_idx * PGDIR_SIZE + i * P4D_SIZE); - if (!(p4d_val(*p4d) & _PAGE_PRESENT)) + if (!p4d_present(*p4d)) continue; pud = (pud_t *)p4d_page_vaddr(*p4d); -- cgit v1.2.3 From b8c1e4293a5d1dfd19ab7b0984bfce8191940500 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Tue, 26 Jun 2018 13:03:41 +0300 Subject: x86/mm: Drop unneeded __always_inline for p4d page table helpers This reverts the following commits: 1ea66554d3b0 ("x86/mm: Mark p4d_offset() __always_inline") 046c0dbec023 ("x86: Mark native_set_p4d() as __always_inline") p4d_offset(), native_set_p4d() and native_p4d_clear() were marked __always_inline in attempt to move __pgtable_l5_enabled into __initdata section. It was required as KASAN initialization code is a user of USE_EARLY_PGTABLE_L5, so all pgtable_l5_enabled() translated to __pgtable_l5_enabled there. This includes pgtable_l5_enabled() called from inline p4d helpers. If compiler would decided to not inline these p4d helpers, but leave them standalone, we end up with section mismatch. We don't need __always_inline here anymore. __pgtable_l5_enabled moved back to be __ro_after_init. See the following commit: 51be13351517 ("Revert "x86/mm: Mark __pgtable_l5_enabled __initdata"") Signed-off-by: Kirill A. Shutemov Cc: Arnd Bergmann Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20180626100341.49910-1-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/pgtable.h | 2 +- arch/x86/include/asm/pgtable_64.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h index 99ecde23c3ec..5715647fc4fe 100644 --- a/arch/x86/include/asm/pgtable.h +++ b/arch/x86/include/asm/pgtable.h @@ -898,7 +898,7 @@ static inline unsigned long pgd_page_vaddr(pgd_t pgd) #define pgd_page(pgd) pfn_to_page(pgd_pfn(pgd)) /* to find an entry in a page-table-directory. */ -static __always_inline p4d_t *p4d_offset(pgd_t *pgd, unsigned long address) +static inline p4d_t *p4d_offset(pgd_t *pgd, unsigned long address) { if (!pgtable_l5_enabled()) return (p4d_t *)pgd; diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h index 0fdcd21dadbd..3c5385f9a88f 100644 --- a/arch/x86/include/asm/pgtable_64.h +++ b/arch/x86/include/asm/pgtable_64.h @@ -216,7 +216,7 @@ static inline pgd_t pti_set_user_pgd(pgd_t *pgdp, pgd_t pgd) } #endif -static __always_inline void native_set_p4d(p4d_t *p4dp, p4d_t p4d) +static inline void native_set_p4d(p4d_t *p4dp, p4d_t p4d) { pgd_t pgd; @@ -230,7 +230,7 @@ static __always_inline void native_set_p4d(p4d_t *p4dp, p4d_t p4d) *p4dp = native_make_p4d(native_pgd_val(pgd)); } -static __always_inline void native_p4d_clear(p4d_t *p4d) +static inline void native_p4d_clear(p4d_t *p4d) { native_set_p4d(p4d, native_make_p4d(0)); } -- cgit v1.2.3 From 9331510135640429711afbd0c810686100824a79 Mon Sep 17 00:00:00 2001 From: Mathieu Malaterre Date: Tue, 26 Jun 2018 22:23:00 +0200 Subject: perf/core: Move inline keyword at the beginning of declaration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix non-fatal warning triggered during compilation with W=1: kernel/events/core.c:6106:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] static void __always_inline ^~~~~~ Signed-off-by: Mathieu Malaterre Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20180626202301.20270-1-malat@debian.org Signed-off-by: Ingo Molnar --- kernel/events/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index 80cca2b30c4f..8f0434a9951a 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -6482,7 +6482,7 @@ void perf_prepare_sample(struct perf_event_header *header, data->phys_addr = perf_virt_to_phys(data->addr); } -static void __always_inline +static __always_inline void __perf_event_output(struct perf_event *event, struct perf_sample_data *data, struct pt_regs *regs, -- cgit v1.2.3 From 9e421b8fffb92bfd1c274f1deae611a6ab99d8a7 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 26 Jun 2018 12:09:51 +0200 Subject: Documentation: admin-guide: intel_pstate: Fix sysfs path Fix an incorrect sysfs path in the intel_pstate admin-guide documentation. Fixes: 33fc30b47098 (cpufreq: intel_pstate: Document the current behavior and user interface) Reported-by: Pawit Pornkitprasan Signed-off-by: Rafael J. Wysocki --- Documentation/admin-guide/pm/intel_pstate.rst | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst index 8b9164990956..d74fb572f6cc 100644 --- a/Documentation/admin-guide/pm/intel_pstate.rst +++ b/Documentation/admin-guide/pm/intel_pstate.rst @@ -324,8 +324,7 @@ Global Attributes ``intel_pstate`` exposes several global attributes (files) in ``sysfs`` to control its functionality at the system level. They are located in the -``/sys/devices/system/cpu/cpufreq/intel_pstate/`` directory and affect all -CPUs. +``/sys/devices/system/cpu/intel_pstate/`` directory and affect all CPUs. Some of them are not present if the ``intel_pstate=per_cpu_perf_limits`` argument is passed to the kernel in the command line. -- cgit v1.2.3 From 649f53a3e4cf6873741673b9271275e484c56194 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 26 Jun 2018 17:20:43 +0200 Subject: Documentation: intel_pstate: Describe hwp_dynamic_boost sysfs knob Document the recently introduced hwp_dynamic_boost sysfs knob allowing user space to tell intel_pstate to use iowait boosting in the active mode with HWP enabled (to improve performance). Signed-off-by: Rafael J. Wysocki Acked-by: Srinivas Pandruvada --- Documentation/admin-guide/pm/intel_pstate.rst | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst index d74fb572f6cc..8f1d3de449b5 100644 --- a/Documentation/admin-guide/pm/intel_pstate.rst +++ b/Documentation/admin-guide/pm/intel_pstate.rst @@ -378,6 +378,17 @@ argument is passed to the kernel in the command line. but it affects the maximum possible value of per-policy P-state limits (see `Interpretation of Policy Attributes`_ below for details). +``hwp_dynamic_boost`` + This attribute is only present if ``intel_pstate`` works in the + `active mode with the HWP feature enabled `_ in + the processor. If set (equal to 1), it causes the minimum P-state limit + to be increased dynamically for a short time whenever a task previously + waiting on I/O is selected to run on a given logical CPU (the purpose + of this mechanism is to improve performance). + + This setting has no effect on logical CPUs whose minimum P-state limit + is directly set to the highest non-turbo P-state or above it. + .. _status_attr: ``status`` -- cgit v1.2.3 From d79d0d8ad0cb3d782b41631dfeac8eb05e414bcd Mon Sep 17 00:00:00 2001 From: Dmitry Vyukov Date: Wed, 27 Jun 2018 11:07:15 +0200 Subject: x86/mm: Clean up the printk()s in show_fault_oops() - Remove 'nx_warning' and 'smep_warning', which are just pointless obfuscation. - Also convert to pr_crit(). Suggested-by: Joe Perches Signed-off-by: Dmitry Vyukov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20180627090715.28076-1-dvyukov@gmail.com Signed-off-by: Ingo Molnar --- arch/x86/mm/fault.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index ee85766e6329..2aafa6ab6103 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -641,11 +641,6 @@ static int is_f00f_bug(struct pt_regs *regs, unsigned long address) return 0; } -static const char nx_warning[] = KERN_CRIT -"kernel tried to execute NX-protected page - exploit attempt? (uid: %d)\n"; -static const char smep_warning[] = KERN_CRIT -"unable to execute userspace code (SMEP?) (uid: %d)\n"; - static void show_fault_oops(struct pt_regs *regs, unsigned long error_code, unsigned long address) @@ -664,11 +659,13 @@ show_fault_oops(struct pt_regs *regs, unsigned long error_code, pte = lookup_address_in_pgd(pgd, address, &level); if (pte && pte_present(*pte) && !pte_exec(*pte)) - printk(nx_warning, from_kuid(&init_user_ns, current_uid())); + pr_crit("kernel tried to execute NX-protected page - exploit attempt? (uid: %d)\n", + from_kuid(&init_user_ns, current_uid())); if (pte && pte_present(*pte) && pte_exec(*pte) && (pgd_flags(*pgd) & _PAGE_USER) && (__read_cr4() & X86_CR4_SMEP)) - printk(smep_warning, from_kuid(&init_user_ns, current_uid())); + pr_crit("unable to execute userspace code (SMEP?) (uid: %d)\n", + from_kuid(&init_user_ns, current_uid())); } pr_alert("BUG: unable to handle kernel %s at %px\n", -- cgit v1.2.3 From 3eb1b955cd7ed1e621ace856710006c2a8a7f231 Mon Sep 17 00:00:00 2001 From: Keerthy Date: Tue, 5 Jun 2018 15:37:51 +0530 Subject: ARM: dts: da850: Fix interrups property for gpio The intc #interrupt-cells is equal to 1. Currently gpio node has 2 cells per IRQ which is wrong. Remove the additional cell for each of the interrupts. Signed-off-by: Keerthy Fixes: 2e38b946dc54 ("ARM: davinci: da850: add GPIO DT node") Signed-off-by: Sekhar Nori --- arch/arm/boot/dts/da850.dtsi | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index f6f1597b03df..0f4f817a9e22 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -549,11 +549,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x226000 0x1000>; - interrupts = <42 IRQ_TYPE_EDGE_BOTH - 43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH - 45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH - 47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH - 49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>; + interrupts = <42 43 44 45 46 47 48 49 50>; ti,ngpio = <144>; ti,davinci-gpio-unbanked = <0>; status = "disabled"; -- cgit v1.2.3 From a685557fbbc3122ed11e8ad3fa63a11ebc5de8c3 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Tue, 26 Jun 2018 12:04:23 -0400 Subject: dm thin: handle running out of data space vs concurrent discard Discards issued to a DM thin device can complete to userspace (via fstrim) _before_ the metadata changes associated with the discards is reflected in the thinp superblock (e.g. free blocks). As such, if a user constructs a test that loops repeatedly over these steps, block allocation can fail due to discards not having completed yet: 1) fill thin device via filesystem file 2) remove file 3) fstrim From initial report, here: https://www.redhat.com/archives/dm-devel/2018-April/msg00022.html "The root cause of this issue is that dm-thin will first remove mapping and increase corresponding blocks' reference count to prevent them from being reused before DISCARD bios get processed by the underlying layers. However. increasing blocks' reference count could also increase the nr_allocated_this_transaction in struct sm_disk which makes smd->old_ll.nr_allocated + smd->nr_allocated_this_transaction bigger than smd->old_ll.nr_blocks. In this case, alloc_data_block() will never commit metadata to reset the begin pointer of struct sm_disk, because sm_disk_get_nr_free() always return an underflow value." While there is room for improvement to the space-map accounting that thinp is making use of: the reality is this test is inherently racey and will result in the previous iteration's fstrim's discard(s) completing vs concurrent block allocation, via dd, in the next iteration of the loop. No amount of space map accounting improvements will be able to allow user's to use a block before a discard of that block has completed. So the best we can really do is allow DM thinp to gracefully handle such aggressive use of all the pool's data by degrading the pool into out-of-data-space (OODS) mode. We _should_ get that behaviour already (if space map accounting didn't falsely cause alloc_data_block() to believe free space was available).. but short of that we handle the current reality that dm_pool_alloc_data_block() can return -ENOSPC. Reported-by: Dennis Yang Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer --- drivers/md/dm-thin.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 7945238df1c0..b900723bbd0f 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -1386,6 +1386,8 @@ static void schedule_external_copy(struct thin_c *tc, dm_block_t virt_block, static void set_pool_mode(struct pool *pool, enum pool_mode new_mode); +static void requeue_bios(struct pool *pool); + static void check_for_space(struct pool *pool) { int r; @@ -1398,8 +1400,10 @@ static void check_for_space(struct pool *pool) if (r) return; - if (nr_free) + if (nr_free) { set_pool_mode(pool, PM_WRITE); + requeue_bios(pool); + } } /* @@ -1476,7 +1480,10 @@ static int alloc_data_block(struct thin_c *tc, dm_block_t *result) r = dm_pool_alloc_data_block(pool->pmd, result); if (r) { - metadata_operation_failed(pool, "dm_pool_alloc_data_block", r); + if (r == -ENOSPC) + set_pool_mode(pool, PM_OUT_OF_DATA_SPACE); + else + metadata_operation_failed(pool, "dm_pool_alloc_data_block", r); return r; } -- cgit v1.2.3 From 45a0faaba9c8c5ba1e31a08a391aed0bad327167 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 27 Jun 2018 10:07:45 -0300 Subject: drm/etnaviv: Check for platform_device_register_simple() failure platform_device_register_simple() may fail, so we should better check its return value and propagate it in the case of error. Cc: Fixes: 246774d17fc0 ("drm/etnaviv: remove the need for a gpu-subsystem DT node") Signed-off-by: Fabio Estevam Reviewed-by: Philipp Zabel Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_drv.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/etnaviv/etnaviv_drv.c b/drivers/gpu/drm/etnaviv/etnaviv_drv.c index e5013a999147..19abd3ca6618 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_drv.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_drv.c @@ -631,8 +631,11 @@ static struct platform_driver etnaviv_platform_driver = { }, }; +static struct platform_device *etnaviv_drm; + static int __init etnaviv_init(void) { + struct platform_device *pdev; int ret; struct device_node *np; @@ -644,7 +647,7 @@ static int __init etnaviv_init(void) ret = platform_driver_register(&etnaviv_platform_driver); if (ret != 0) - platform_driver_unregister(&etnaviv_gpu_driver); + goto unregister_gpu_driver; /* * If the DT contains at least one available GPU device, instantiate @@ -653,12 +656,24 @@ static int __init etnaviv_init(void) for_each_compatible_node(np, NULL, "vivante,gc") { if (!of_device_is_available(np)) continue; - - platform_device_register_simple("etnaviv", -1, NULL, 0); + pdev = platform_device_register_simple("etnaviv", -1, + NULL, 0); + if (IS_ERR(pdev)) { + ret = PTR_ERR(pdev); + of_node_put(np); + goto unregister_platform_driver; + } + etnaviv_drm = pdev; of_node_put(np); break; } + return 0; + +unregister_platform_driver: + platform_driver_unregister(&etnaviv_platform_driver); +unregister_gpu_driver: + platform_driver_unregister(&etnaviv_gpu_driver); return ret; } module_init(etnaviv_init); -- cgit v1.2.3 From bf6ba3aeb2962e5ee4a78e7535af579ecba630bb Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 27 Jun 2018 10:07:46 -0300 Subject: drm/etnaviv: Fix driver unregistering Russell King reported: "When removing and reloading the etnaviv module, the following splat occurs: sysfs: cannot create duplicate filename '/devices/platform/etnaviv' CPU: 0 PID: 1471 Comm: modprobe Not tainted 4.17.0+ #1608 Hardware name: Marvell Dove (Cubox) Backtrace: [] (dump_backtrace) from [] (show_stack+0x18/0x1c) r6:ef033e38 r5:ee07b340 r4:edb9d000 r3:00000000 [] (show_stack) from [] (dump_stack+0x20/0x28) [] (dump_stack) from [] (sysfs_warn_dup+0x5c/0x70) [] (sysfs_warn_dup) from [] (sysfs_create_dir_ns+0x90/0x98) ..." Commit 246774d17fc0 ("drm/etnaviv: remove the need for a gpu-subsystem DT node") introduced DRM registration via platform_device_register_simple(), but missed to call platform_device_unregister() inside etnaviv_exit(). Fix the problem by calling platform_device_unregister() inside etnaviv_exit(). While at it, also rearrange the function calls in the exit path to make them happen in the opposite order of registration. Tested on a imx6-sabresd board. Cc: Fixes: 246774d17fc0 ("drm/etnaviv: remove the need for a gpu-subsystem DT node") Reported-by: Russell King Signed-off-by: Fabio Estevam Reviewed-by: Philipp Zabel Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/etnaviv/etnaviv_drv.c b/drivers/gpu/drm/etnaviv/etnaviv_drv.c index 19abd3ca6618..540b59fb4103 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_drv.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_drv.c @@ -680,8 +680,9 @@ module_init(etnaviv_init); static void __exit etnaviv_exit(void) { - platform_driver_unregister(&etnaviv_gpu_driver); + platform_device_unregister(etnaviv_drm); platform_driver_unregister(&etnaviv_platform_driver); + platform_driver_unregister(&etnaviv_gpu_driver); } module_exit(etnaviv_exit); -- cgit v1.2.3 From 86676c4685f774d818f7a6c401c925bbf2a92903 Mon Sep 17 00:00:00 2001 From: Katsuhiro Suzuki Date: Tue, 19 Jun 2018 13:12:05 +0900 Subject: arm64: dts: uniphier: fix widget name of headphone for LD11/LD20 boards This patch fixes wrong name of headphone widget for receiving events of insert/remove headphone plug from simple-card or audio-graph-card. If we use wrong widget name then we get warning messages such as "asoc-audio-graph-card sound: ASoC: DAPM unknown pin Headphones" when the plug is inserted or removed from headphone jack. Fixes: fb21a0acaa2b7 ("arm64: dts: uniphier: add sound node") Signed-off-by: Katsuhiro Suzuki Signed-off-by: Masahiro Yamada Signed-off-by: Olof Johansson --- arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts | 2 +- arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts index 9b4dc41703e3..ae3b5adf32df 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts @@ -54,7 +54,7 @@ sound { compatible = "audio-graph-card"; label = "UniPhier LD11"; - widgets = "Headphone", "Headphone Jack"; + widgets = "Headphone", "Headphones"; dais = <&i2s_port2 &i2s_port3 &i2s_port4 diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts index fe6608ea3277..7919233c9ce2 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts @@ -54,7 +54,7 @@ sound { compatible = "audio-graph-card"; label = "UniPhier LD20"; - widgets = "Headphone", "Headphone Jack"; + widgets = "Headphone", "Headphones"; dais = <&i2s_port2 &i2s_port3 &i2s_port4 -- cgit v1.2.3 From 3b41c3e28e9882760b78864487558b66aaa6261e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 27 Jun 2018 08:40:44 -0700 Subject: checkpatch: remove warning for 'old' stable@kernel.org address It may not be the actual real stable mailing list address, but the stable scripts to actually pick up on the traditional way to mark stable patches. There are also reasons to explicitly avoid using the actual mailing list address, since security patches with embargo dates generally do want the stable marking, but don't want tools etc to mistakenly send the patch out to the mailing list early. So don't warn for things that are still actively used and explicitly supported. Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 6 ------ 1 file changed, 6 deletions(-) diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index e3b7362b0ee4..a9c05506e325 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -2606,12 +2606,6 @@ sub process { "A patch subject line should describe the change not the tool that found it\n" . $herecurr); } -# Check for old stable address - if ($line =~ /^\s*cc:\s*.*?.*$/i) { - ERROR("STABLE_ADDRESS", - "The 'stable' address should be 'stable\@vger.kernel.org'\n" . $herecurr); - } - # Check for unwanted Gerrit info if ($in_commit_log && $line =~ /^\s*change-id:/i) { ERROR("GERRIT_CHANGE_ID", -- cgit v1.2.3 From 429388682dc266e7a693f9c27e3aabd341d55343 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 22 Jun 2018 09:31:15 +0100 Subject: arm64: Avoid flush_icache_range() in alternatives patching code The implementation of flush_icache_range() includes instruction sequences which are themselves patched at runtime, so it is not safe to call from the patching framework. This patch reworks the alternatives cache-flushing code so that it rolls its own internal D-cache maintenance using DC CIVAC before invalidating the entire I-cache after all alternatives have been applied at boot. Modules don't cause any issues, since flush_icache_range() is safe to call by the time they are loaded. Acked-by: Mark Rutland Reported-by: Rohit Khanna Cc: Alexander Van Brunt Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/alternative.h | 7 ++++- arch/arm64/kernel/alternative.c | 51 +++++++++++++++++++++++++++++++----- arch/arm64/kernel/module.c | 5 ++-- 3 files changed, 52 insertions(+), 11 deletions(-) diff --git a/arch/arm64/include/asm/alternative.h b/arch/arm64/include/asm/alternative.h index a91933b1e2e6..4b650ec1d7dd 100644 --- a/arch/arm64/include/asm/alternative.h +++ b/arch/arm64/include/asm/alternative.h @@ -28,7 +28,12 @@ typedef void (*alternative_cb_t)(struct alt_instr *alt, __le32 *origptr, __le32 *updptr, int nr_inst); void __init apply_alternatives_all(void); -void apply_alternatives(void *start, size_t length); + +#ifdef CONFIG_MODULES +void apply_alternatives_module(void *start, size_t length); +#else +static inline void apply_alternatives_module(void *start, size_t length) { } +#endif #define ALTINSTR_ENTRY(feature,cb) \ " .word 661b - .\n" /* label */ \ diff --git a/arch/arm64/kernel/alternative.c b/arch/arm64/kernel/alternative.c index 5c4bce4ac381..36fb069fd049 100644 --- a/arch/arm64/kernel/alternative.c +++ b/arch/arm64/kernel/alternative.c @@ -122,7 +122,30 @@ static void patch_alternative(struct alt_instr *alt, } } -static void __apply_alternatives(void *alt_region, bool use_linear_alias) +/* + * We provide our own, private D-cache cleaning function so that we don't + * accidentally call into the cache.S code, which is patched by us at + * runtime. + */ +static void clean_dcache_range_nopatch(u64 start, u64 end) +{ + u64 cur, d_size, ctr_el0; + + ctr_el0 = read_sanitised_ftr_reg(SYS_CTR_EL0); + d_size = 4 << cpuid_feature_extract_unsigned_field(ctr_el0, + CTR_DMINLINE_SHIFT); + cur = start & ~(d_size - 1); + do { + /* + * We must clean+invalidate to the PoC in order to avoid + * Cortex-A53 errata 826319, 827319, 824069 and 819472 + * (this corresponds to ARM64_WORKAROUND_CLEAN_CACHE) + */ + asm volatile("dc civac, %0" : : "r" (cur) : "memory"); + } while (cur += d_size, cur < end); +} + +static void __apply_alternatives(void *alt_region, bool is_module) { struct alt_instr *alt; struct alt_region *region = alt_region; @@ -145,7 +168,7 @@ static void __apply_alternatives(void *alt_region, bool use_linear_alias) pr_info_once("patching kernel code\n"); origptr = ALT_ORIG_PTR(alt); - updptr = use_linear_alias ? lm_alias(origptr) : origptr; + updptr = is_module ? origptr : lm_alias(origptr); nr_inst = alt->orig_len / AARCH64_INSN_SIZE; if (alt->cpufeature < ARM64_CB_PATCH) @@ -155,8 +178,20 @@ static void __apply_alternatives(void *alt_region, bool use_linear_alias) alt_cb(alt, origptr, updptr, nr_inst); - flush_icache_range((uintptr_t)origptr, - (uintptr_t)(origptr + nr_inst)); + if (!is_module) { + clean_dcache_range_nopatch((u64)origptr, + (u64)(origptr + nr_inst)); + } + } + + /* + * The core module code takes care of cache maintenance in + * flush_module_icache(). + */ + if (!is_module) { + dsb(ish); + __flush_icache_all(); + isb(); } } @@ -178,7 +213,7 @@ static int __apply_alternatives_multi_stop(void *unused) isb(); } else { BUG_ON(alternatives_applied); - __apply_alternatives(®ion, true); + __apply_alternatives(®ion, false); /* Barriers provided by the cache flushing */ WRITE_ONCE(alternatives_applied, 1); } @@ -192,12 +227,14 @@ void __init apply_alternatives_all(void) stop_machine(__apply_alternatives_multi_stop, NULL, cpu_online_mask); } -void apply_alternatives(void *start, size_t length) +#ifdef CONFIG_MODULES +void apply_alternatives_module(void *start, size_t length) { struct alt_region region = { .begin = start, .end = start + length, }; - __apply_alternatives(®ion, false); + __apply_alternatives(®ion, true); } +#endif diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c index 155fd91e78f4..f0f27aeefb73 100644 --- a/arch/arm64/kernel/module.c +++ b/arch/arm64/kernel/module.c @@ -448,9 +448,8 @@ int module_finalize(const Elf_Ehdr *hdr, const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) { - if (strcmp(".altinstructions", secstrs + s->sh_name) == 0) { - apply_alternatives((void *)s->sh_addr, s->sh_size); - } + if (strcmp(".altinstructions", secstrs + s->sh_name) == 0) + apply_alternatives_module((void *)s->sh_addr, s->sh_size); #ifdef CONFIG_ARM64_MODULE_PLTS if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE) && !strcmp(".text.ftrace_trampoline", secstrs + s->sh_name)) -- cgit v1.2.3 From 24fe1b0efad4fcdd32ce46cffeab297f22581707 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 22 Jun 2018 09:31:16 +0100 Subject: arm64: Remove unnecessary ISBs from set_{pte,pmd,pud} Commit 7f0b1bf04511 ("arm64: Fix barriers used for page table modifications") fixed a reported issue with fixmap page-table entries not being visible to the walker due to a missing DSB instruction. At the same time, it added ISB instructions to the arm64 set_{pte,pmd,pud} functions, which are not required by the architecture and make little sense in isolation. Remove the redundant ISBs. Acked-by: Catalin Marinas Acked-by: Mark Rutland Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/pgtable.h | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 9f82d6b53851..1bdeca8918a6 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -224,10 +224,8 @@ static inline void set_pte(pte_t *ptep, pte_t pte) * Only if the new pte is valid and kernel, otherwise TLB maintenance * or update_mmu_cache() have the necessary barriers. */ - if (pte_valid_not_user(pte)) { + if (pte_valid_not_user(pte)) dsb(ishst); - isb(); - } } extern void __sync_icache_dcache(pte_t pteval); @@ -434,7 +432,6 @@ static inline void set_pmd(pmd_t *pmdp, pmd_t pmd) { WRITE_ONCE(*pmdp, pmd); dsb(ishst); - isb(); } static inline void pmd_clear(pmd_t *pmdp) @@ -485,7 +482,6 @@ static inline void set_pud(pud_t *pudp, pud_t pud) { WRITE_ONCE(*pudp, pud); dsb(ishst); - isb(); } static inline void pud_clear(pud_t *pudp) -- cgit v1.2.3 From 0e49740c35c1d8f0c8fd84e9387b6a1007228d6f Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 27 Jun 2018 13:07:07 -0500 Subject: MAINTAINERS: Timur has a kernel.org address Timur Tabi no longer works for Qualcomm, and he now has a kernel.org email address, so update MAINTAINERS accordingly. Signed-off-by: Timur Tabi Signed-off-by: Linus Torvalds --- MAINTAINERS | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index f0896c04811e..bfb8a18d4793 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5673,7 +5673,7 @@ F: drivers/crypto/caam/ F: Documentation/devicetree/bindings/crypto/fsl-sec4.txt FREESCALE DIU FRAMEBUFFER DRIVER -M: Timur Tabi +M: Timur Tabi L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/fbdev/fsl-diu-fb.* @@ -5773,7 +5773,7 @@ S: Maintained F: drivers/net/wan/fsl_ucc_hdlc* FREESCALE QUICC ENGINE UCC UART DRIVER -M: Timur Tabi +M: Timur Tabi L: linuxppc-dev@lists.ozlabs.org S: Maintained F: drivers/tty/serial/ucc_uart.c @@ -5797,7 +5797,7 @@ F: drivers/net/ethernet/freescale/fs_enet/ F: include/linux/fs_enet_pd.h FREESCALE SOC SOUND DRIVERS -M: Timur Tabi +M: Timur Tabi M: Nicolin Chen M: Xiubo Li R: Fabio Estevam @@ -11813,9 +11813,9 @@ F: Documentation/devicetree/bindings/opp/kryo-cpufreq.txt F: drivers/cpufreq/qcom-cpufreq-kryo.c QUALCOMM EMAC GIGABIT ETHERNET DRIVER -M: Timur Tabi +M: Timur Tabi L: netdev@vger.kernel.org -S: Supported +S: Maintained F: drivers/net/ethernet/qualcomm/emac/ QUALCOMM HEXAGON ARCHITECTURE -- cgit v1.2.3 From d9e98ee248b04b2462e7411b204d420d04f1ba27 Mon Sep 17 00:00:00 2001 From: Leo Liu Date: Mon, 25 Jun 2018 14:56:06 -0400 Subject: drm/amdgpu: fix UBSAN: Undefined behaviour for amdgpu_fence.c Here is the UBSAN dump: [ 3.866656] index 2 is out of range for type 'amdgpu_uvd_inst [2]' [ 3.866693] Workqueue: events work_for_cpu_fn [ 3.866702] Call Trace: [ 3.866710] dump_stack+0x85/0xc5 [ 3.866719] ubsan_epilogue+0x9/0x40 [ 3.866727] __ubsan_handle_out_of_bounds+0x89/0x90 [ 3.866737] ? rcu_read_lock_sched_held+0x58/0x60 [ 3.866746] ? __kmalloc+0x26c/0x2d0 [ 3.866846] amdgpu_fence_driver_start_ring+0x259/0x280 [amdgpu] [ 3.866896] amdgpu_ring_init+0x12c/0x710 [amdgpu] [ 3.866906] ? sprintf+0x42/0x50 [ 3.866956] amdgpu_gfx_kiq_init_ring+0x1bc/0x3a0 [amdgpu] [ 3.867009] gfx_v8_0_sw_init+0x1ad3/0x2360 [amdgpu] [ 3.867062] ? smu7_init+0xec/0x160 [amdgpu] [ 3.867109] amdgpu_device_init+0x112c/0x1dc0 [amdgpu] 'ring->me' might be set as 2 with 'amdgpu_gfx_kiq_init_ring', that would cause out of range for 'amdgpu_uvd_inst[2]'. v2: simplified with ring type Signed-off-by: Leo Liu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c index 39ec6b8890a1..e74d620d9699 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c @@ -376,7 +376,7 @@ int amdgpu_fence_driver_start_ring(struct amdgpu_ring *ring, struct amdgpu_device *adev = ring->adev; uint64_t index; - if (ring != &adev->uvd.inst[ring->me].ring) { + if (ring->funcs->type != AMDGPU_RING_TYPE_UVD) { ring->fence_drv.cpu_addr = &adev->wb.wb[ring->fence_offs]; ring->fence_drv.gpu_addr = adev->wb.gpu_addr + (ring->fence_offs * 4); } else { -- cgit v1.2.3 From 62d5b8e33b774128c93baac35a4347a6cfb64434 Mon Sep 17 00:00:00 2001 From: James Zhu Date: Tue, 19 Jun 2018 13:44:04 -0400 Subject: drm/amdgpu:Support new VCN FW version naming convention Support new VCN FW version naming convention: [31, 28] for VEP interface major version if applicable [27, 24] for decode interface major version [23, 20] for encode interface major version [19, 12] for encode interface minor version [11, 0] for firmware revision Bit 20-23, it is encode major and non-zero for new naming convention. This field is part of version minor and DRM_DISABLED_FLAG in old naming convention. Since the latest version minor is 0x5B and DRM_DISABLED_FLAG is zero in old naming convention, this field is always zero so far. These four bits are used to tell which naming convention is present. Signed-off-by: James Zhu Reviewed-by: Fang, Peter Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c | 33 +++++++++++++++++++++++++++------ 1 file changed, 27 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c index 127e87b470ff..1b4ad9b2a755 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c @@ -52,7 +52,7 @@ int amdgpu_vcn_sw_init(struct amdgpu_device *adev) unsigned long bo_size; const char *fw_name; const struct common_firmware_header *hdr; - unsigned version_major, version_minor, family_id; + unsigned char fw_check; int r; INIT_DELAYED_WORK(&adev->vcn.idle_work, amdgpu_vcn_idle_work_handler); @@ -83,12 +83,33 @@ int amdgpu_vcn_sw_init(struct amdgpu_device *adev) hdr = (const struct common_firmware_header *)adev->vcn.fw->data; adev->vcn.fw_version = le32_to_cpu(hdr->ucode_version); - family_id = le32_to_cpu(hdr->ucode_version) & 0xff; - version_major = (le32_to_cpu(hdr->ucode_version) >> 24) & 0xff; - version_minor = (le32_to_cpu(hdr->ucode_version) >> 8) & 0xff; - DRM_INFO("Found VCN firmware Version: %hu.%hu Family ID: %hu\n", - version_major, version_minor, family_id); + /* Bit 20-23, it is encode major and non-zero for new naming convention. + * This field is part of version minor and DRM_DISABLED_FLAG in old naming + * convention. Since the l:wq!atest version minor is 0x5B and DRM_DISABLED_FLAG + * is zero in old naming convention, this field is always zero so far. + * These four bits are used to tell which naming convention is present. + */ + fw_check = (le32_to_cpu(hdr->ucode_version) >> 20) & 0xf; + if (fw_check) { + unsigned int dec_ver, enc_major, enc_minor, vep, fw_rev; + + fw_rev = le32_to_cpu(hdr->ucode_version) & 0xfff; + enc_minor = (le32_to_cpu(hdr->ucode_version) >> 12) & 0xff; + enc_major = fw_check; + dec_ver = (le32_to_cpu(hdr->ucode_version) >> 24) & 0xf; + vep = (le32_to_cpu(hdr->ucode_version) >> 28) & 0xf; + DRM_INFO("Found VCN firmware Version ENC: %hu.%hu DEC: %hu VEP: %hu Revision: %hu\n", + enc_major, enc_minor, dec_ver, vep, fw_rev); + } else { + unsigned int version_major, version_minor, family_id; + + family_id = le32_to_cpu(hdr->ucode_version) & 0xff; + version_major = (le32_to_cpu(hdr->ucode_version) >> 24) & 0xff; + version_minor = (le32_to_cpu(hdr->ucode_version) >> 8) & 0xff; + DRM_INFO("Found VCN firmware Version: %hu.%hu Family ID: %hu\n", + version_major, version_minor, family_id); + } bo_size = AMDGPU_GPU_PAGE_ALIGN(le32_to_cpu(hdr->ucode_size_bytes) + 8) + AMDGPU_VCN_STACK_SIZE + AMDGPU_VCN_HEAP_SIZE -- cgit v1.2.3 From 4de9f38bb2cce3a4821ffb8a83d6b08f6e37d905 Mon Sep 17 00:00:00 2001 From: Shirish S Date: Tue, 26 Jun 2018 09:32:39 +0530 Subject: drm/amd/display: release spinlock before committing updates to stream MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, amdgpu_do_flip() spinlocks crtc->dev->event_lock and releases it only after committing updates to the stream. dc_commit_updates_for_stream() should be moved out of spinlock for the below reasons: 1. event_lock is supposed to protect access to acrct->pflip_status _only_ 2. dc_commit_updates_for_stream() has potential sleep's and also its not appropriate to be in an atomic state for such long sequences of code. Signed-off-by: Shirish S Suggested-by: Andrey Grodzovsky Reviewed-by: Michel Dänzer Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 689dbdf44bbf..3a8d6356afc2 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -3928,10 +3928,11 @@ static void amdgpu_dm_do_flip(struct drm_crtc *crtc, if (acrtc->base.state->event) prepare_flip_isr(acrtc); + spin_unlock_irqrestore(&crtc->dev->event_lock, flags); + surface_updates->surface = dc_stream_get_status(acrtc_state->stream)->plane_states[0]; surface_updates->flip_addr = &addr; - dc_commit_updates_for_stream(adev->dm.dc, surface_updates, 1, @@ -3944,9 +3945,6 @@ static void amdgpu_dm_do_flip(struct drm_crtc *crtc, __func__, addr.address.grph.addr.high_part, addr.address.grph.addr.low_part); - - - spin_unlock_irqrestore(&crtc->dev->event_lock, flags); } /* -- cgit v1.2.3 From d5b4885b1dff72ac670b518cfeaac719d768bd4d Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Thu, 26 Apr 2018 12:50:46 +0200 Subject: ARM64: dts: meson: disable sd-uhs modes on the libretech-cc There is a problem with the sd-uhs mode when doing a soft reboot. Switching back from 1.8v to 3.3v messes with the card, which no longer respond (timeout errors). According to the specification, we should perform a card reset (power cycling the card) but this is something we cannot control on this design. Then the only solution to restore the communication with the card is an "unplug-plug" which is not acceptable Until we find a solution, if any, disable the sd-uhs modes on this design. For the people using uhs at the moment, there will a performance drop as a result. Fixes: 3cde63ebc85c ("ARM64: dts: meson-gxl: libretech-cc: enable high speed modes") Signed-off-by: Jerome Brunet Cc: stable@vger.kernel.org Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 3e3eb31748a3..f63bceb88caa 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -234,9 +234,6 @@ bus-width = <4>; cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; max-frequency = <100000000>; disable-wp; -- cgit v1.2.3 From e490520c902e06e837e07948f026e7949bb16007 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 4 Jun 2018 15:23:09 -0700 Subject: ARM64: dts: meson: fix register ranges for SD/eMMC Based on updated information from Amlogic, correct the register range for the SD/eMMC blocks to the right size. Reported-by: Yixun Lan Tested-by: Yixun Lan Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++-- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index fee87737a201..67d7115e4eff 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -132,7 +132,7 @@ sd_emmc_b: sd@5000 { compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x5000 0x0 0x2000>; + reg = <0x0 0x5000 0x0 0x800>; interrupts = ; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_B>, @@ -144,7 +144,7 @@ sd_emmc_c: mmc@7000 { compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x7000 0x0 0x2000>; + reg = <0x0 0x7000 0x0 0x800>; interrupts = ; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_C>, diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 3c31e21cbed7..b003f324ca31 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -457,21 +457,21 @@ sd_emmc_a: mmc@70000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x70000 0x0 0x2000>; + reg = <0x0 0x70000 0x0 0x800>; interrupts = ; status = "disabled"; }; sd_emmc_b: mmc@72000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x72000 0x0 0x2000>; + reg = <0x0 0x72000 0x0 0x800>; interrupts = ; status = "disabled"; }; sd_emmc_c: mmc@74000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x74000 0x0 0x2000>; + reg = <0x0 0x74000 0x0 0x800>; interrupts = ; status = "disabled"; }; -- cgit v1.2.3 From d511b3e4087eedbe11c7496c396432b8b7c2d7d9 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Tue, 5 Jun 2018 10:52:23 +0200 Subject: ARM64: dts: meson-gxl-s905x-p212: Add phy-supply for usb0 Like LibreTech-CC, the USB0 needs the 5V regulator to be enabled to power the devices on the P212 Reference Design based boards. Fixes: b9f07cb4f41f ("ARM64: dts: meson-gxl-s905x-p212: enable the USB controller") Signed-off-by: Neil Armstrong Acked-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index 0cfd701809de..a1b31013ab6e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -189,3 +189,10 @@ &usb0 { status = "okay"; }; + +&usb2_phy0 { + /* + * HDMI_5V is also used as supply for the USB VBUS. + */ + phy-supply = <&hdmi_5v>; +}; -- cgit v1.2.3 From 48e21ded0432ee1e2359d4143d7a6925cefee1b5 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 7 Jun 2018 13:51:01 -0700 Subject: ARM64: dts: meson-gx: fix ATF reserved memory region Vendor firmware/uboot has different reserved regions depending on firmware version, but current codebase reserves the same regions on GXL and GXBB, so move the additional reserved memory region to common .dtsi. Found when putting a recent vendor u-boot on meson-gxbb-p200. Suggested-by: Neil Armstrong Cc: stable@vger.kernel.org Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 ++++++ arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 8 -------- 2 files changed, 6 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index b003f324ca31..b8dc4dbb391b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -35,6 +35,12 @@ no-map; }; + /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved_alt: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; reusable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 27538eea547b..c87a80e9bcc6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -13,14 +13,6 @@ / { compatible = "amlogic,meson-gxl"; - reserved-memory { - /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved_alt: secmon@5000000 { - reg = <0x0 0x05000000 0x0 0x300000>; - no-map; - }; - }; - soc { usb0: usb@c9000000 { status = "disabled"; -- cgit v1.2.3 From 6d28d577510f1a51f7ffbe830fdbf42077e0058b Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Mon, 25 Jun 2018 14:56:53 +0200 Subject: ARM64: dts: meson-axg: fix ethernet stability issue Like the odroid-c2 and wetek, the s400 uses the RTL8211F and seems to suffer from the kind of stability issue. Doing an iperf3 download test, we can see a significant number of LPI interrupts on the tx path. After a short while (5 to 15 seconds), the network connection dies. If using rootfs over NFS, the connection may also break during the boot sequence. We still don't have a real explanation for this problem so let's disable EEE once again. Fixes: f6f6ac914b82 ("ARM64: dts: meson-axg: enable ethernet for A113D S400 board") Signed-off-by: Jerome Brunet Reviewed-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index 4b3331fbfe39..dff9b15eb3c0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -66,9 +66,22 @@ ðmac { status = "okay"; - phy-mode = "rgmii"; pinctrl-0 = <ð_rgmii_y_pins>; pinctrl-names = "default"; + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + eee-broken-1000t; + }; + }; }; &uart_A { -- cgit v1.2.3 From 1c38f4afd5d40234b67635b3c608a4093be04b96 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 23 Jun 2018 17:00:56 +0200 Subject: ARM64: dts: meson-gxl: fix Mali GPU compatible string meson-gxl-mali.dtsi is only used on GXL SoCs. Thus it should use the GXL specific compatible string instead of the GXBB one. For now this is purely cosmetic since the (out-of-tree) lima driver for this GPU currently uses the "arm,mali-450" match instead of the SoC specific one. However, update the .dts to match the documentation since this driver behavior might change in the future. Signed-off-by: Martin Blumenstingl Acked-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi index eb327664a4d8..6aaafff674f9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi @@ -6,7 +6,7 @@ &apb { mali: gpu@c0000 { - compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; + compatible = "amlogic,meson-gxl-mali", "arm,mali-450"; reg = <0x0 0xc0000 0x0 0x40000>; interrupts = , , -- cgit v1.2.3 From 877f919e192a09e77962a13d7165783027dee5fd Mon Sep 17 00:00:00 2001 From: Chunyu Hu Date: Sun, 10 Jun 2018 03:51:24 +0800 Subject: proc: add proc_seq_release kmemleak reported some memory leak on reading proc files. After adding some debug lines, find that proc_seq_fops is using seq_release as release handler, which won't handle the free of 'private' field of seq_file, while in fact the open handler proc_seq_open could create the private data with __seq_open_private when state_size is greater than zero. So after reading files created with proc_create_seq_private, such as /proc/timer_list and /proc/vmallocinfo, the private mem of a seq_file is not freed. Fix it by adding the paired proc_seq_release as the default release handler of proc_seq_ops instead of seq_release. Fixes: 44414d82cfe0 ("proc: introduce proc_create_seq_private") Reviewed-by: Christoph Hellwig CC: Christoph Hellwig Signed-off-by: Chunyu Hu Signed-off-by: Al Viro --- fs/proc/generic.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/fs/proc/generic.c b/fs/proc/generic.c index 6ac1c92997ea..bb1c1625b158 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -564,11 +564,20 @@ static int proc_seq_open(struct inode *inode, struct file *file) return seq_open(file, de->seq_ops); } +static int proc_seq_release(struct inode *inode, struct file *file) +{ + struct proc_dir_entry *de = PDE(inode); + + if (de->state_size) + return seq_release_private(inode, file); + return seq_release(inode, file); +} + static const struct file_operations proc_seq_fops = { .open = proc_seq_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = proc_seq_release, }; struct proc_dir_entry *proc_create_seq_private(const char *name, umode_t mode, -- cgit v1.2.3 From 82be2ab159a3a0ae4024b946a31f12b221f6c8ff Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 27 Jun 2018 17:47:37 +0800 Subject: hinic: reset irq affinity before freeing irq Following warning is seen when rmmod hinic. This is because affinity value is not reset before calling free_irq(). This patch fixes it. [ 55.181232] WARNING: CPU: 38 PID: 19589 at kernel/irq/manage.c:1608 __free_irq+0x2aa/0x2c0 Fixes: 352f58b0d9f2 ("net-next/hinic: Set Rxq irq to specific cpu for NUMA") Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/huawei/hinic/hinic_rx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/huawei/hinic/hinic_rx.c b/drivers/net/ethernet/huawei/hinic/hinic_rx.c index e2e5cdc7119c..4c0f7eda1166 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_rx.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_rx.c @@ -439,6 +439,7 @@ static void rx_free_irq(struct hinic_rxq *rxq) { struct hinic_rq *rq = rxq->rq; + irq_set_affinity_hint(rq->irq, NULL); free_irq(rq->irq, rxq); rx_del_napi(rxq); } -- cgit v1.2.3 From 88e85a7daf8e21f2d6cb054374d480c540725cde Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 26 Jun 2018 12:55:35 +0900 Subject: bpfilter: check compiler capability in Kconfig With the brand-new syntax extension of Kconfig, we can directly check the compiler capability in the configuration phase. If the cc-can-link.sh fails, the BPFILTER_UMH is automatically hidden by the dependency. I also deleted 'default n', which is no-op. Signed-off-by: Masahiro Yamada Acked-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- Makefile | 5 ----- net/Makefile | 4 ---- net/bpfilter/Kconfig | 2 +- scripts/cc-can-link.sh | 2 +- 4 files changed, 2 insertions(+), 11 deletions(-) diff --git a/Makefile b/Makefile index c9132594860b..e1bd4c3627bc 100644 --- a/Makefile +++ b/Makefile @@ -507,11 +507,6 @@ ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLA KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO endif -ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/cc-can-link.sh $(CC)), y) - CC_CAN_LINK := y - export CC_CAN_LINK -endif - # The expansion should be delayed until arch/$(SRCARCH)/Makefile is included. # Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile. # CC_VERSION_TEXT is referenced from Kconfig (so it needs export), diff --git a/net/Makefile b/net/Makefile index 13ec0d5415c7..bdaf53925acd 100644 --- a/net/Makefile +++ b/net/Makefile @@ -20,11 +20,7 @@ obj-$(CONFIG_TLS) += tls/ obj-$(CONFIG_XFRM) += xfrm/ obj-$(CONFIG_UNIX) += unix/ obj-$(CONFIG_NET) += ipv6/ -ifneq ($(CC_CAN_LINK),y) -$(warning CC cannot link executables. Skipping bpfilter.) -else obj-$(CONFIG_BPFILTER) += bpfilter/ -endif obj-$(CONFIG_PACKET) += packet/ obj-$(CONFIG_NET_KEY) += key/ obj-$(CONFIG_BRIDGE) += bridge/ diff --git a/net/bpfilter/Kconfig b/net/bpfilter/Kconfig index a948b072c28f..76deb6615883 100644 --- a/net/bpfilter/Kconfig +++ b/net/bpfilter/Kconfig @@ -1,6 +1,5 @@ menuconfig BPFILTER bool "BPF based packet filtering framework (BPFILTER)" - default n depends on NET && BPF && INET help This builds experimental bpfilter framework that is aiming to @@ -9,6 +8,7 @@ menuconfig BPFILTER if BPFILTER config BPFILTER_UMH tristate "bpfilter kernel module with user mode helper" + depends on $(success,$(srctree)/scripts/cc-can-link.sh $(CC)) default m help This builds bpfilter kernel module with embedded user mode helper diff --git a/scripts/cc-can-link.sh b/scripts/cc-can-link.sh index 208eb2825dab..6efcead31989 100755 --- a/scripts/cc-can-link.sh +++ b/scripts/cc-can-link.sh @@ -1,7 +1,7 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 -cat << "END" | $@ -x c - -o /dev/null >/dev/null 2>&1 && echo "y" +cat << "END" | $@ -x c - -o /dev/null >/dev/null 2>&1 #include int main(void) { -- cgit v1.2.3 From fec9d3b1dc4c481f20f5d2f5aef3ad1cb7504186 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 26 Jun 2018 10:44:01 +0200 Subject: net: macb: initialize bp->queues[0].bp for at91rm9200 The macb driver currently crashes on at91rm9200 with the following trace: Unable to handle kernel NULL pointer dereference at virtual address 00000014 [...] [] (macb_rx_desc) from [] (at91ether_open+0x2e8/0x3f8) [] (at91ether_open) from [] (__dev_open+0x120/0x13c) [] (__dev_open) from [] (__dev_change_flags+0x17c/0x1a8) [] (__dev_change_flags) from [] (dev_change_flags+0x18/0x4c) [] (dev_change_flags) from [] (ip_auto_config+0x220/0x10b0) [] (ip_auto_config) from [] (do_one_initcall+0x78/0x18c) [] (do_one_initcall) from [] (kernel_init_freeable+0x184/0x1c4) [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe8) [] (kernel_init) from [] (ret_from_fork+0x14/0x34) Solve that by initializing bp->queues[0].bp in at91ether_init (as is done in macb_init). Fixes: ae1f2a56d273 ("net: macb: Added support for many RX queues") Signed-off-by: Alexandre Belloni Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 3e93df5d4e3b..96cc03a6d942 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -3726,6 +3726,8 @@ static int at91ether_init(struct platform_device *pdev) int err; u32 reg; + bp->queues[0].bp = bp; + dev->netdev_ops = &at91ether_netdev_ops; dev->ethtool_ops = &macb_ethtool_ops; -- cgit v1.2.3 From ad088ec480768850db019a5cc543685e868a513d Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Tue, 26 Jun 2018 17:39:48 +0200 Subject: ixgbe: split XDP_TX tail and XDP_REDIRECT map flushing The driver was combining the XDP_TX tail flush and XDP_REDIRECT map flushing (xdp_do_flush_map). This is suboptimal, these two flush operations should be kept separate. Fixes: 11393cc9b9be ("xdp: Add batching support to redirect map") Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 3e87dbbc9024..62e57b05a0ae 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -2186,9 +2186,10 @@ static struct sk_buff *ixgbe_build_skb(struct ixgbe_ring *rx_ring, return skb; } -#define IXGBE_XDP_PASS 0 -#define IXGBE_XDP_CONSUMED 1 -#define IXGBE_XDP_TX 2 +#define IXGBE_XDP_PASS 0 +#define IXGBE_XDP_CONSUMED BIT(0) +#define IXGBE_XDP_TX BIT(1) +#define IXGBE_XDP_REDIR BIT(2) static int ixgbe_xmit_xdp_ring(struct ixgbe_adapter *adapter, struct xdp_frame *xdpf); @@ -2225,7 +2226,7 @@ static struct sk_buff *ixgbe_run_xdp(struct ixgbe_adapter *adapter, case XDP_REDIRECT: err = xdp_do_redirect(adapter->netdev, xdp, xdp_prog); if (!err) - result = IXGBE_XDP_TX; + result = IXGBE_XDP_REDIR; else result = IXGBE_XDP_CONSUMED; break; @@ -2285,7 +2286,7 @@ static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, unsigned int mss = 0; #endif /* IXGBE_FCOE */ u16 cleaned_count = ixgbe_desc_unused(rx_ring); - bool xdp_xmit = false; + unsigned int xdp_xmit = 0; struct xdp_buff xdp; xdp.rxq = &rx_ring->xdp_rxq; @@ -2328,8 +2329,10 @@ static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, } if (IS_ERR(skb)) { - if (PTR_ERR(skb) == -IXGBE_XDP_TX) { - xdp_xmit = true; + unsigned int xdp_res = -PTR_ERR(skb); + + if (xdp_res & (IXGBE_XDP_TX | IXGBE_XDP_REDIR)) { + xdp_xmit |= xdp_res; ixgbe_rx_buffer_flip(rx_ring, rx_buffer, size); } else { rx_buffer->pagecnt_bias++; @@ -2401,7 +2404,10 @@ static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, total_rx_packets++; } - if (xdp_xmit) { + if (xdp_xmit & IXGBE_XDP_REDIR) + xdp_do_flush_map(); + + if (xdp_xmit & IXGBE_XDP_TX) { struct ixgbe_ring *ring = adapter->xdp_ring[smp_processor_id()]; /* Force memory writes to complete before letting h/w @@ -2409,8 +2415,6 @@ static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, */ wmb(); writel(ring->next_to_use, ring->tail); - - xdp_do_flush_map(); } u64_stats_update_begin(&rx_ring->syncp); -- cgit v1.2.3 From 2e6893123830d04edc366e0ce59d46e622e140c1 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Tue, 26 Jun 2018 17:39:53 +0200 Subject: i40e: split XDP_TX tail and XDP_REDIRECT map flushing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver was combining the XDP_TX tail flush and XDP_REDIRECT map flushing (xdp_do_flush_map). This is suboptimal, these two flush operations should be kept separate. It looks like the mistake was copy-pasted from ixgbe. Fixes: d9314c474d4f ("i40e: add support for XDP_REDIRECT") Signed-off-by: Jesper Dangaard Brouer Acked-by: Björn Töpel Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index ed6dbcfd4e96..b151ae316546 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2199,9 +2199,10 @@ static bool i40e_is_non_eop(struct i40e_ring *rx_ring, return true; } -#define I40E_XDP_PASS 0 -#define I40E_XDP_CONSUMED 1 -#define I40E_XDP_TX 2 +#define I40E_XDP_PASS 0 +#define I40E_XDP_CONSUMED BIT(0) +#define I40E_XDP_TX BIT(1) +#define I40E_XDP_REDIR BIT(2) static int i40e_xmit_xdp_ring(struct xdp_frame *xdpf, struct i40e_ring *xdp_ring); @@ -2248,7 +2249,7 @@ static struct sk_buff *i40e_run_xdp(struct i40e_ring *rx_ring, break; case XDP_REDIRECT: err = xdp_do_redirect(rx_ring->netdev, xdp, xdp_prog); - result = !err ? I40E_XDP_TX : I40E_XDP_CONSUMED; + result = !err ? I40E_XDP_REDIR : I40E_XDP_CONSUMED; break; default: bpf_warn_invalid_xdp_action(act); @@ -2311,7 +2312,8 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget) unsigned int total_rx_bytes = 0, total_rx_packets = 0; struct sk_buff *skb = rx_ring->skb; u16 cleaned_count = I40E_DESC_UNUSED(rx_ring); - bool failure = false, xdp_xmit = false; + unsigned int xdp_xmit = 0; + bool failure = false; struct xdp_buff xdp; xdp.rxq = &rx_ring->xdp_rxq; @@ -2372,8 +2374,10 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget) } if (IS_ERR(skb)) { - if (PTR_ERR(skb) == -I40E_XDP_TX) { - xdp_xmit = true; + unsigned int xdp_res = -PTR_ERR(skb); + + if (xdp_res & (I40E_XDP_TX | I40E_XDP_REDIR)) { + xdp_xmit |= xdp_res; i40e_rx_buffer_flip(rx_ring, rx_buffer, size); } else { rx_buffer->pagecnt_bias++; @@ -2427,12 +2431,14 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget) total_rx_packets++; } - if (xdp_xmit) { + if (xdp_xmit & I40E_XDP_REDIR) + xdp_do_flush_map(); + + if (xdp_xmit & I40E_XDP_TX) { struct i40e_ring *xdp_ring = rx_ring->vsi->xdp_rings[rx_ring->queue_index]; i40e_xdp_ring_update_tail(xdp_ring); - xdp_do_flush_map(); } rx_ring->skb = skb; -- cgit v1.2.3 From 2471c75efed32529698c26da499954f0253cb401 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Tue, 26 Jun 2018 17:39:58 +0200 Subject: virtio_net: split XDP_TX kick and XDP_REDIRECT map flushing The driver was combining XDP_TX virtqueue_kick and XDP_REDIRECT map flushing (xdp_do_flush_map). This is suboptimal, these two flush operations should be kept separate. The suboptimal behavior was introduced in commit 9267c430c6b6 ("virtio-net: add missing virtqueue kick when flushing packets"). Fixes: 9267c430c6b6 ("virtio-net: add missing virtqueue kick when flushing packets") Signed-off-by: Jesper Dangaard Brouer Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index b6c9a2af3732..53085c63277b 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -53,6 +53,10 @@ module_param(napi_tx, bool, 0644); /* Amount of XDP headroom to prepend to packets for use by xdp_adjust_head */ #define VIRTIO_XDP_HEADROOM 256 +/* Separating two types of XDP xmit */ +#define VIRTIO_XDP_TX BIT(0) +#define VIRTIO_XDP_REDIR BIT(1) + /* RX packet size EWMA. The average packet size is used to determine the packet * buffer size when refilling RX rings. As the entire RX ring may be refilled * at once, the weight is chosen so that the EWMA will be insensitive to short- @@ -582,7 +586,7 @@ static struct sk_buff *receive_small(struct net_device *dev, struct receive_queue *rq, void *buf, void *ctx, unsigned int len, - bool *xdp_xmit) + unsigned int *xdp_xmit) { struct sk_buff *skb; struct bpf_prog *xdp_prog; @@ -654,14 +658,14 @@ static struct sk_buff *receive_small(struct net_device *dev, trace_xdp_exception(vi->dev, xdp_prog, act); goto err_xdp; } - *xdp_xmit = true; + *xdp_xmit |= VIRTIO_XDP_TX; rcu_read_unlock(); goto xdp_xmit; case XDP_REDIRECT: err = xdp_do_redirect(dev, &xdp, xdp_prog); if (err) goto err_xdp; - *xdp_xmit = true; + *xdp_xmit |= VIRTIO_XDP_REDIR; rcu_read_unlock(); goto xdp_xmit; default: @@ -723,7 +727,7 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, void *buf, void *ctx, unsigned int len, - bool *xdp_xmit) + unsigned int *xdp_xmit) { struct virtio_net_hdr_mrg_rxbuf *hdr = buf; u16 num_buf = virtio16_to_cpu(vi->vdev, hdr->num_buffers); @@ -818,7 +822,7 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, put_page(xdp_page); goto err_xdp; } - *xdp_xmit = true; + *xdp_xmit |= VIRTIO_XDP_TX; if (unlikely(xdp_page != page)) put_page(page); rcu_read_unlock(); @@ -830,7 +834,7 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, put_page(xdp_page); goto err_xdp; } - *xdp_xmit = true; + *xdp_xmit |= VIRTIO_XDP_REDIR; if (unlikely(xdp_page != page)) put_page(page); rcu_read_unlock(); @@ -939,7 +943,8 @@ xdp_xmit: } static int receive_buf(struct virtnet_info *vi, struct receive_queue *rq, - void *buf, unsigned int len, void **ctx, bool *xdp_xmit) + void *buf, unsigned int len, void **ctx, + unsigned int *xdp_xmit) { struct net_device *dev = vi->dev; struct sk_buff *skb; @@ -1232,7 +1237,8 @@ static void refill_work(struct work_struct *work) } } -static int virtnet_receive(struct receive_queue *rq, int budget, bool *xdp_xmit) +static int virtnet_receive(struct receive_queue *rq, int budget, + unsigned int *xdp_xmit) { struct virtnet_info *vi = rq->vq->vdev->priv; unsigned int len, received = 0, bytes = 0; @@ -1321,7 +1327,7 @@ static int virtnet_poll(struct napi_struct *napi, int budget) struct virtnet_info *vi = rq->vq->vdev->priv; struct send_queue *sq; unsigned int received, qp; - bool xdp_xmit = false; + unsigned int xdp_xmit = 0; virtnet_poll_cleantx(rq); @@ -1331,12 +1337,14 @@ static int virtnet_poll(struct napi_struct *napi, int budget) if (received < budget) virtqueue_napi_complete(napi, rq->vq, received); - if (xdp_xmit) { + if (xdp_xmit & VIRTIO_XDP_REDIR) + xdp_do_flush_map(); + + if (xdp_xmit & VIRTIO_XDP_TX) { qp = vi->curr_queue_pairs - vi->xdp_queue_pairs + smp_processor_id(); sq = &vi->sq[qp]; virtqueue_kick(sq->vq); - xdp_do_flush_map(); } return received; -- cgit v1.2.3 From e3f329c600033f011a978a8bc4ddb1e2e94c4f4d Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 19 Jun 2018 15:20:50 +0200 Subject: dmaengine: pl330: report BURST residue granularity The reported residue is already calculated in BURST unit granularity, so advertise this capability properly to other devices in the system. Fixes: aee4d1fac887 ("dmaengine: pl330: improve pl330_tx_status() function") Signed-off-by: Marek Szyprowski Signed-off-by: Vinod Koul --- drivers/dma/pl330.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index defcdde4d358..de0957fe9668 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -3033,7 +3033,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) pd->src_addr_widths = PL330_DMA_BUSWIDTHS; pd->dst_addr_widths = PL330_DMA_BUSWIDTHS; pd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); - pd->residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT; + pd->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; pd->max_burst = ((pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP) ? 1 : PL330_MAX_BURST); -- cgit v1.2.3 From c4c2b7644cc9a41f17a8cc8904efe3f66ae4c7ed Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 22 Jun 2018 14:15:47 +0300 Subject: dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate() The d->chans[] array has d->dma_requests elements so the > should be >= here. Fixes: 8e6152bc660e ("dmaengine: Add hisilicon k3 DMA engine driver") Signed-off-by: Dan Carpenter Signed-off-by: Vinod Koul --- drivers/dma/k3dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/k3dma.c b/drivers/dma/k3dma.c index fa31cccbe04f..6bfa217ed6d0 100644 --- a/drivers/dma/k3dma.c +++ b/drivers/dma/k3dma.c @@ -794,7 +794,7 @@ static struct dma_chan *k3_of_dma_simple_xlate(struct of_phandle_args *dma_spec, struct k3_dma_dev *d = ofdma->of_dma_data; unsigned int request = dma_spec->args[0]; - if (request > d->dma_requests) + if (request >= d->dma_requests) return NULL; return dma_get_slave_channel(&(d->chans[request].vc.chan)); -- cgit v1.2.3 From 933e671f8cff87552d4d26cf3874633b11ae78ba Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Tue, 26 Jun 2018 12:22:28 -0600 Subject: selftests/net: Fix permissions for fib_tests.sh MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fib_tests.sh became non-executable at some point. This is what happens: selftests: net: fib_tests.sh: Warning: file fib_tests.sh is not executable, correct this. not ok 1..11 selftests: net: fib_tests.sh [FAIL] Fixes: d69faad76584 ("selftests: fib_tests: Add prefix route tests with metric") Signed-off-by: Daniel Díaz Signed-off-by: David S. Miller --- tools/testing/selftests/net/fib_tests.sh | 0 1 file changed, 0 insertions(+), 0 deletions(-) mode change 100644 => 100755 tools/testing/selftests/net/fib_tests.sh diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh old mode 100644 new mode 100755 -- cgit v1.2.3 From 9191fc2a431bade3dedc9ad17759495a9f82f41b Mon Sep 17 00:00:00 2001 From: Ryan Hsu Date: Mon, 18 Jun 2018 17:00:04 +0300 Subject: ath10k: update the phymode along with bandwidth change request MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In the case of Station connects to AP with narrower bandwidth at beginning. And later the AP changes the bandwidth to winder bandwidth, the AP will beacon with wider bandwidth IE, eg VHT20->VHT40->VHT80 or VHT40->VHT80. Since the supported BANDWIDTH will be limited by the PHYMODE, so while Station receives the bandwidth change request, it will also need to reconfigure the PHYMODE setting to firmware instead of just configuring the BANDWIDTH info, otherwise it'll trigger a firmware crash with non-support bandwidth. The issue was observed in WLAN.RM.4.4.1-00051-QCARMSWP-1, QCA6174 with below scenario: AP xxx changed bandwidth, new config is 5200 MHz, width 2 (5190/0 MHz) disconnect from AP xxx for new auth to yyy RX ReassocResp from xxx (capab=0x1111 status=0 aid=102) associated .... AP xxx changed bandwidth, new config is 5200 MHz, width 2 (5190/0 MHz) AP xxx changed bandwidth, new config is 5200 MHz, width 3 (5210/0 MHz) .... firmware register dump: [00]: 0x05030000 0x000015B3 0x00987291 0x00955B31 [04]: 0x00987291 0x00060730 0x00000004 0x00000001 [08]: 0x004089F0 0x00955A00 0x000A0B00 0x00400000 [12]: 0x00000009 0x00000000 0x00952CD0 0x00952CE6 [16]: 0x00952CC4 0x0098E25F 0x00000000 0x0091080D [20]: 0x40987291 0x0040E7A8 0x00000000 0x0041EE3C [24]: 0x809ABF05 0x0040E808 0x00000000 0xC0987291 [28]: 0x809A650C 0x0040E948 0x0041FE40 0x004345C4 [32]: 0x809A5C63 0x0040E988 0x0040E9AC 0x0042D1A8 [36]: 0x8091D252 0x0040E9A8 0x00000002 0x00000001 [40]: 0x809FDA9D 0x0040EA58 0x0043D554 0x0042D554 [44]: 0x809F8B22 0x0040EA78 0x0043D554 0x00000001 [48]: 0x80911210 0x0040EAC8 0x00000010 0x004041D0 [52]: 0x80911154 0x0040EB28 0x00400000 0x00000000 [56]: 0x8091122D 0x0040EB48 0x00000000 0x00400600 Reported-by: Rouven Czerwinski Tested-by: Timur Kristóf Signed-off-by: Ryan Hsu Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/mac.c | 16 ++++++++++++++-- drivers/net/wireless/ath/ath10k/wmi.h | 1 + 2 files changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index e9c2fb318c03..836e0a47b94a 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -6058,8 +6058,19 @@ static void ath10k_sta_rc_update_wk(struct work_struct *wk) ath10k_mac_max_vht_nss(vht_mcs_mask))); if (changed & IEEE80211_RC_BW_CHANGED) { - ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM peer bw %d\n", - sta->addr, bw); + enum wmi_phy_mode mode; + + mode = chan_to_phymode(&def); + ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM peer bw %d phymode %d\n", + sta->addr, bw, mode); + + err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, + WMI_PEER_PHYMODE, mode); + if (err) { + ath10k_warn(ar, "failed to update STA %pM peer phymode %d: %d\n", + sta->addr, mode, err); + goto exit; + } err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, WMI_PEER_CHAN_WIDTH, bw); @@ -6100,6 +6111,7 @@ static void ath10k_sta_rc_update_wk(struct work_struct *wk) sta->addr); } +exit: mutex_unlock(&ar->conf_mutex); } diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index b48db54e9865..d68afb65402a 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -6144,6 +6144,7 @@ enum wmi_peer_param { WMI_PEER_NSS = 0x5, WMI_PEER_USE_4ADDR = 0x6, WMI_PEER_DEBUG = 0xa, + WMI_PEER_PHYMODE = 0xd, WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ }; -- cgit v1.2.3 From 371d5e9d99e1e6051ce8bd02ab3db4d43be62b85 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 18 Jun 2018 17:00:08 +0300 Subject: wcn36xx: Remove Unicode Byte Order Mark from testcode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Older gcc (< 4.4) doesn't like files starting with a Unicode BOM: drivers/net/wireless/ath/wcn36xx/testmode.c:1: error: stray ‘\357’ in program drivers/net/wireless/ath/wcn36xx/testmode.c:1: error: stray ‘\273’ in program drivers/net/wireless/ath/wcn36xx/testmode.c:1: error: stray ‘\277’ in program Remove the BOM, the rest of the file is plain ASCII anyway. Output of "file drivers/net/wireless/ath/wcn36xx/testmode.c" before: drivers/net/wireless/ath/wcn36xx/testmode.c: C source, UTF-8 Unicode (with BOM) text and after: drivers/net/wireless/ath/wcn36xx/testmode.c: C source, ASCII text Fixes: 87f825e6e246cee0 ("wcn36xx: Add support for Factory Test Mode (FTM)") Signed-off-by: Geert Uytterhoeven Acked-by: Ramon Fried Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/wcn36xx/testmode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/wcn36xx/testmode.c b/drivers/net/wireless/ath/wcn36xx/testmode.c index 1279064a3b71..51a038022c8b 100644 --- a/drivers/net/wireless/ath/wcn36xx/testmode.c +++ b/drivers/net/wireless/ath/wcn36xx/testmode.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (c) 2018, The Linux Foundation. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for any -- cgit v1.2.3 From 6f7de19ed3d4d3526ca5eca428009f97cf969c2f Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Wed, 27 Jun 2018 18:19:55 +0800 Subject: btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf Commit ff3d27a048d9 ("btrfs: qgroup: Finish rescan when hit the last leaf of extent tree") added a new exit for rescan finish. However after finishing quota rescan, we set fs_info->qgroup_rescan_progress to (u64)-1 before we exit through the original exit path. While we missed that assignment of (u64)-1 in the new exit path. The end result is, the quota status item doesn't have the same value. (-1 vs the last bytenr + 1) Although it doesn't affect quota accounting, it's still better to keep the original behavior. Reported-by: Misono Tomohiro Fixes: ff3d27a048d9 ("btrfs: qgroup: Finish rescan when hit the last leaf of extent tree") Signed-off-by: Qu Wenruo Reviewed-by: Misono Tomohiro Signed-off-by: David Sterba --- fs/btrfs/qgroup.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 1874a6d2e6f5..99f2b9ce0f15 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -2680,8 +2680,10 @@ out: free_extent_buffer(scratch_leaf); } - if (done && !ret) + if (done && !ret) { ret = 1; + fs_info->qgroup_rescan_progress.objectid = (u64)-1; + } return ret; } -- cgit v1.2.3 From 717beb96d969561cff53aad2f09547db20ee6ffd Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 25 Jun 2018 10:03:41 -0700 Subject: Btrfs: fix regression in btrfs_page_mkwrite() from vm_fault_t conversion The vm_fault_t conversion commit introduced a ret2 variable for tracking the integer return values from internal btrfs functions. It was sometimes returning VM_FAULT_LOCKED for pages that were actually invalid and had been removed from the radix. Something like this: ret2 = btrfs_delalloc_reserve_space() // returns zero on success lock_page(page) if (page->mapping != inode->i_mapping) goto out_unlock; ... out_unlock: if (!ret2) { ... return VM_FAULT_LOCKED; } This ends up triggering this WARNING in btrfs_destroy_inode() WARN_ON(BTRFS_I(inode)->block_rsv.size); xfstests generic/095 was able to reliably reproduce the errors. Since out_unlock: is only used for errors, this fix moves it below the if (!ret2) check we use to return VM_FAULT_LOCKED for success. Fixes: a528a2415087 (btrfs: change return type of btrfs_page_mkwrite to vm_fault_t) Signed-off-by: Chris Mason Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index a6bf9e2ff68f..f21f4223d03b 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -9005,13 +9005,14 @@ again: unlock_extent_cached(io_tree, page_start, page_end, &cached_state); -out_unlock: if (!ret2) { btrfs_delalloc_release_extents(BTRFS_I(inode), PAGE_SIZE, true); sb_end_pagefault(inode->i_sb); extent_changeset_free(data_reserved); return VM_FAULT_LOCKED; } + +out_unlock: unlock_page(page); out: btrfs_delalloc_release_extents(BTRFS_I(inode), PAGE_SIZE, (ret != 0)); -- cgit v1.2.3 From e4e7ede739f7fb468686dfffa2d1e35dca35bacd Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Wed, 27 Jun 2018 00:43:15 +0100 Subject: Btrfs: fix mount failure when qgroup rescan is in progress If a power failure happens while the qgroup rescan kthread is running, the next mount operation will always fail. This is because of a recent regression that makes qgroup_rescan_init() incorrectly return -EINVAL when we are mounting the filesystem (through btrfs_read_qgroup_config()). This causes the -EINVAL error to be returned regardless of any qgroup flags being set instead of returning the error only when neither of the flags BTRFS_QGROUP_STATUS_FLAG_RESCAN nor BTRFS_QGROUP_STATUS_FLAG_ON are set. A test case for fstests follows up soon. Fixes: 9593bf49675e ("btrfs: qgroup: show more meaningful qgroup_rescan_init error message") Signed-off-by: Filipe Manana Reviewed-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/qgroup.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 99f2b9ce0f15..c25dc47210a3 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -2786,13 +2786,20 @@ qgroup_rescan_init(struct btrfs_fs_info *fs_info, u64 progress_objectid, if (!init_flags) { /* we're resuming qgroup rescan at mount time */ - if (!(fs_info->qgroup_flags & BTRFS_QGROUP_STATUS_FLAG_RESCAN)) + if (!(fs_info->qgroup_flags & + BTRFS_QGROUP_STATUS_FLAG_RESCAN)) { btrfs_warn(fs_info, "qgroup rescan init failed, qgroup is not enabled"); - else if (!(fs_info->qgroup_flags & BTRFS_QGROUP_STATUS_FLAG_ON)) + ret = -EINVAL; + } else if (!(fs_info->qgroup_flags & + BTRFS_QGROUP_STATUS_FLAG_ON)) { btrfs_warn(fs_info, "qgroup rescan init failed, qgroup rescan is not queued"); - return -EINVAL; + ret = -EINVAL; + } + + if (ret) + return ret; } mutex_lock(&fs_info->qgroup_rescan_lock); -- cgit v1.2.3 From 210d0797c97d0e8f3b1a932a0dc143f4c57008a3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 28 Jun 2018 13:59:25 +0200 Subject: swiotlb: export swiotlb_dma_ops For architectures that do not use per-device dma ops we need to export the dma_map_ops structure returned from get_arch_dma_ops(). Fixes: 10314e09 ("riscv: add swiotlb support") Signed-off-by: Christoph Hellwig Reported-by: Andreas Schwab --- kernel/dma/swiotlb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c index 04b68d9dffac..904541055792 100644 --- a/kernel/dma/swiotlb.c +++ b/kernel/dma/swiotlb.c @@ -1085,3 +1085,4 @@ const struct dma_map_ops swiotlb_dma_ops = { .unmap_page = swiotlb_unmap_page, .dma_supported = dma_direct_supported, }; +EXPORT_SYMBOL(swiotlb_dma_ops); -- cgit v1.2.3 From 3d63b7e4ae0dc5e02d28ddd2fa1f945defc68d81 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Sat, 26 May 2018 09:53:13 +0900 Subject: n_tty: Fix stall at n_tty_receive_char_special(). syzbot is reporting stalls at n_tty_receive_char_special() [1]. This is because comparison is not working as expected since ldata->read_head can change at any moment. Mitigate this by explicitly masking with buffer size when checking condition for "while" loops. [1] https://syzkaller.appspot.com/bug?id=3d7481a346958d9469bebbeb0537d5f056bdd6e8 Signed-off-by: Tetsuo Handa Reported-by: syzbot Fixes: bc5a5e3f45d04784 ("n_tty: Don't wrap input buffer indices at buffer size") Cc: stable Cc: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index cbe98bc2b998..b279f8730e04 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -124,6 +124,8 @@ struct n_tty_data { struct mutex output_lock; }; +#define MASK(x) ((x) & (N_TTY_BUF_SIZE - 1)) + static inline size_t read_cnt(struct n_tty_data *ldata) { return ldata->read_head - ldata->read_tail; @@ -978,14 +980,15 @@ static void eraser(unsigned char c, struct tty_struct *tty) } seen_alnums = 0; - while (ldata->read_head != ldata->canon_head) { + while (MASK(ldata->read_head) != MASK(ldata->canon_head)) { head = ldata->read_head; /* erase a single possibly multibyte character */ do { head--; c = read_buf(ldata, head); - } while (is_continuation(c, tty) && head != ldata->canon_head); + } while (is_continuation(c, tty) && + MASK(head) != MASK(ldata->canon_head)); /* do not partially erase */ if (is_continuation(c, tty)) @@ -1027,7 +1030,7 @@ static void eraser(unsigned char c, struct tty_struct *tty) * This info is used to go back the correct * number of columns. */ - while (tail != ldata->canon_head) { + while (MASK(tail) != MASK(ldata->canon_head)) { tail--; c = read_buf(ldata, tail); if (c == '\t') { @@ -1302,7 +1305,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) finish_erasing(ldata); echo_char(c, tty); echo_char_raw('\n', ldata); - while (tail != ldata->read_head) { + while (MASK(tail) != MASK(ldata->read_head)) { echo_char(read_buf(ldata, tail), tty); tail++; } @@ -2411,7 +2414,7 @@ static unsigned long inq_canon(struct n_tty_data *ldata) tail = ldata->read_tail; nr = head - tail; /* Skip EOF-chars.. */ - while (head != tail) { + while (MASK(head) != MASK(tail)) { if (test_bit(tail & (N_TTY_BUF_SIZE - 1), ldata->read_flags) && read_buf(ldata, tail) == __DISABLED_CHAR) nr--; -- cgit v1.2.3 From ebec3f8f5271139df618ebdf8427e24ba102ba94 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Sat, 26 May 2018 09:53:14 +0900 Subject: n_tty: Access echo_* variables carefully. syzbot is reporting stalls at __process_echoes() [1]. This is because since ldata->echo_commit < ldata->echo_tail becomes true for some reason, the discard loop is serving as almost infinite loop. This patch tries to avoid falling into ldata->echo_commit < ldata->echo_tail situation by making access to echo_* variables more carefully. Since reset_buffer_flags() is called without output_lock held, it should not touch echo_* variables. And omit a call to reset_buffer_flags() from n_tty_open() by using vzalloc(). Since add_echo_byte() is called without output_lock held, it needs memory barrier between storing into echo_buf[] and incrementing echo_head counter. echo_buf() needs corresponding memory barrier before reading echo_buf[]. Lack of handling the possibility of not-yet-stored multi-byte operation might be the reason of falling into ldata->echo_commit < ldata->echo_tail situation, for if I do WARN_ON(ldata->echo_commit == tail + 1) prior to echo_buf(ldata, tail + 1), the WARN_ON() fires. Also, explicitly masking with buffer for the former "while" loop, and use ldata->echo_commit > tail for the latter "while" loop. [1] https://syzkaller.appspot.com/bug?id=17f23b094cd80df750e5b0f8982c521ee6bcbf40 Signed-off-by: Tetsuo Handa Reported-by: syzbot Cc: Peter Hurley Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 42 ++++++++++++++++++++++++------------------ 1 file changed, 24 insertions(+), 18 deletions(-) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index b279f8730e04..431742201709 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -143,6 +143,7 @@ static inline unsigned char *read_buf_addr(struct n_tty_data *ldata, size_t i) static inline unsigned char echo_buf(struct n_tty_data *ldata, size_t i) { + smp_rmb(); /* Matches smp_wmb() in add_echo_byte(). */ return ldata->echo_buf[i & (N_TTY_BUF_SIZE - 1)]; } @@ -318,9 +319,7 @@ static inline void put_tty_queue(unsigned char c, struct n_tty_data *ldata) static void reset_buffer_flags(struct n_tty_data *ldata) { ldata->read_head = ldata->canon_head = ldata->read_tail = 0; - ldata->echo_head = ldata->echo_tail = ldata->echo_commit = 0; ldata->commit_head = 0; - ldata->echo_mark = 0; ldata->line_start = 0; ldata->erasing = 0; @@ -619,12 +618,19 @@ static size_t __process_echoes(struct tty_struct *tty) old_space = space = tty_write_room(tty); tail = ldata->echo_tail; - while (ldata->echo_commit != tail) { + while (MASK(ldata->echo_commit) != MASK(tail)) { c = echo_buf(ldata, tail); if (c == ECHO_OP_START) { unsigned char op; int no_space_left = 0; + /* + * Since add_echo_byte() is called without holding + * output_lock, we might see only portion of multi-byte + * operation. + */ + if (MASK(ldata->echo_commit) == MASK(tail + 1)) + goto not_yet_stored; /* * If the buffer byte is the start of a multi-byte * operation, get the next byte, which is either the @@ -636,6 +642,8 @@ static size_t __process_echoes(struct tty_struct *tty) unsigned int num_chars, num_bs; case ECHO_OP_ERASE_TAB: + if (MASK(ldata->echo_commit) == MASK(tail + 2)) + goto not_yet_stored; num_chars = echo_buf(ldata, tail + 2); /* @@ -730,7 +738,8 @@ static size_t __process_echoes(struct tty_struct *tty) /* If the echo buffer is nearly full (so that the possibility exists * of echo overrun before the next commit), then discard enough * data at the tail to prevent a subsequent overrun */ - while (ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) { + while (ldata->echo_commit > tail && + ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) { if (echo_buf(ldata, tail) == ECHO_OP_START) { if (echo_buf(ldata, tail + 1) == ECHO_OP_ERASE_TAB) tail += 3; @@ -740,6 +749,7 @@ static size_t __process_echoes(struct tty_struct *tty) tail++; } + not_yet_stored: ldata->echo_tail = tail; return old_space - space; } @@ -750,6 +760,7 @@ static void commit_echoes(struct tty_struct *tty) size_t nr, old, echoed; size_t head; + mutex_lock(&ldata->output_lock); head = ldata->echo_head; ldata->echo_mark = head; old = ldata->echo_commit - ldata->echo_tail; @@ -758,10 +769,12 @@ static void commit_echoes(struct tty_struct *tty) * is over the threshold (and try again each time another * block is accumulated) */ nr = head - ldata->echo_tail; - if (nr < ECHO_COMMIT_WATERMARK || (nr % ECHO_BLOCK > old % ECHO_BLOCK)) + if (nr < ECHO_COMMIT_WATERMARK || + (nr % ECHO_BLOCK > old % ECHO_BLOCK)) { + mutex_unlock(&ldata->output_lock); return; + } - mutex_lock(&ldata->output_lock); ldata->echo_commit = head; echoed = __process_echoes(tty); mutex_unlock(&ldata->output_lock); @@ -812,7 +825,9 @@ static void flush_echoes(struct tty_struct *tty) static inline void add_echo_byte(unsigned char c, struct n_tty_data *ldata) { - *echo_buf_addr(ldata, ldata->echo_head++) = c; + *echo_buf_addr(ldata, ldata->echo_head) = c; + smp_wmb(); /* Matches smp_rmb() in echo_buf(). */ + ldata->echo_head++; } /** @@ -1881,30 +1896,21 @@ static int n_tty_open(struct tty_struct *tty) struct n_tty_data *ldata; /* Currently a malloc failure here can panic */ - ldata = vmalloc(sizeof(*ldata)); + ldata = vzalloc(sizeof(*ldata)); if (!ldata) - goto err; + return -ENOMEM; ldata->overrun_time = jiffies; mutex_init(&ldata->atomic_read_lock); mutex_init(&ldata->output_lock); tty->disc_data = ldata; - reset_buffer_flags(tty->disc_data); - ldata->column = 0; - ldata->canon_column = 0; - ldata->num_overrun = 0; - ldata->no_room = 0; - ldata->lnext = 0; tty->closing = 0; /* indicate buffer work may resume */ clear_bit(TTY_LDISC_HALTED, &tty->flags); n_tty_set_termios(tty, NULL); tty_unthrottle(tty); - return 0; -err: - return -ENOMEM; } static inline int input_available_p(struct tty_struct *tty, int poll) -- cgit v1.2.3 From 20dcff436e9fcd2e106b0ccc48a52206bc176d70 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 6 Jun 2018 21:00:41 +0300 Subject: serial: 8250_pci: Remove stalled entries in blacklist After the commit 7d8905d06405 ("serial: 8250_pci: Enable device after we check black list") pure serial multi-port cards, such as CH355, got blacklisted and thus not being enumerated anymore. Previously, it seems, blacklisting them was on purpose to shut up pciserial_init_one() about record duplication. So, remove the entries from blacklist in order to get cards enumerated. Fixes: 7d8905d06405 ("serial: 8250_pci: Enable device after we check black list") Reported-by: Matt Turner Cc: Sergej Pupykin Cc: Alexandr Petrenko Signed-off-by: Andy Shevchenko Reviewed-and-Tested-by: Matt Turner Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 3296a05cda2d..f80a300b5d68 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -3339,9 +3339,7 @@ static const struct pci_device_id blacklist[] = { /* multi-io cards handled by parport_serial */ { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */ { PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */ - { PCI_DEVICE(0x4348, 0x7173), }, /* WCH CH355 4S */ { PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */ - { PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */ /* Moxa Smartio MUE boards handled by 8250_moxa */ { PCI_VDEVICE(MOXA, 0x1024), }, -- cgit v1.2.3 From bc6cf3669d22371f573ab0305b3abf13887c0786 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 13 Jun 2018 17:08:59 +0200 Subject: serdev: fix memleak on module unload Make sure to free all resources associated with the ida on module exit. Fixes: cd6484e1830b ("serdev: Introduce new bus for serial attached devices") Cc: stable # 4.11 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serdev/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c index df93b727e984..9e59f4788589 100644 --- a/drivers/tty/serdev/core.c +++ b/drivers/tty/serdev/core.c @@ -617,6 +617,7 @@ EXPORT_SYMBOL_GPL(__serdev_device_driver_register); static void __exit serdev_exit(void) { bus_unregister(&serdev_bus_type); + ida_destroy(&ctrl_ida); } module_exit(serdev_exit); -- cgit v1.2.3 From 21eff69aaaa0e766ca0ce445b477698dc6a9f55a Mon Sep 17 00:00:00 2001 From: Alexander Potapenko Date: Thu, 14 Jun 2018 12:23:09 +0200 Subject: vt: prevent leaking uninitialized data to userspace via /dev/vcs* KMSAN reported an infoleak when reading from /dev/vcs*: BUG: KMSAN: kernel-infoleak in vcs_read+0x18ba/0x1cc0 Call Trace: ... kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1253 copy_to_user ./include/linux/uaccess.h:184 vcs_read+0x18ba/0x1cc0 drivers/tty/vt/vc_screen.c:352 __vfs_read+0x1b2/0x9d0 fs/read_write.c:416 vfs_read+0x36c/0x6b0 fs/read_write.c:452 ... Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315 __kmalloc+0x13a/0x350 mm/slub.c:3818 kmalloc ./include/linux/slab.h:517 vc_allocate+0x438/0x800 drivers/tty/vt/vt.c:787 con_install+0x8c/0x640 drivers/tty/vt/vt.c:2880 tty_driver_install_tty drivers/tty/tty_io.c:1224 tty_init_dev+0x1b5/0x1020 drivers/tty/tty_io.c:1324 tty_open_by_driver drivers/tty/tty_io.c:1959 tty_open+0x17b4/0x2ed0 drivers/tty/tty_io.c:2007 chrdev_open+0xc25/0xd90 fs/char_dev.c:417 do_dentry_open+0xccc/0x1440 fs/open.c:794 vfs_open+0x1b6/0x2f0 fs/open.c:908 ... Bytes 0-79 of 240 are uninitialized Consistently allocating |vc_screenbuf| with kzalloc() fixes the problem Reported-by: syzbot+17a8efdf800000@syzkaller.appspotmail.com Signed-off-by: Alexander Potapenko Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 1eb1a376a041..15eb6c829d39 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -784,7 +784,7 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */ if (!*vc->vc_uni_pagedir_loc) con_set_default_unimap(vc); - vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL); + vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL); if (!vc->vc_screenbuf) goto err_free; @@ -871,7 +871,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, if (new_screen_size > (4 << 20)) return -EINVAL; - newscreen = kmalloc(new_screen_size, GFP_USER); + newscreen = kzalloc(new_screen_size, GFP_USER); if (!newscreen) return -ENOMEM; -- cgit v1.2.3 From 977c7114ebda2e746a114840d3a875e0cdb826fb Mon Sep 17 00:00:00 2001 From: Doron Roberts-Kedes Date: Tue, 26 Jun 2018 18:33:33 -0700 Subject: strparser: Remove early eaten to fix full tcp receive buffer stall On receving an incomplete message, the existing code stores the remaining length of the cloned skb in the early_eaten field instead of incrementing the value returned by __strp_recv. This defers invocation of sock_rfree for the current skb until the next invocation of __strp_recv, which returns early_eaten if early_eaten is non-zero. This behavior causes a stall when the current message occupies the very tail end of a massive skb, and strp_peek/need_bytes indicates that the remainder of the current message has yet to arrive on the socket. The TCP receive buffer is totally full, causing the TCP window to go to zero, so the remainder of the message will never arrive. Incrementing the value returned by __strp_recv by the amount otherwise stored in early_eaten prevents stalls of this nature. Signed-off-by: Doron Roberts-Kedes Signed-off-by: David S. Miller --- net/strparser/strparser.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-) diff --git a/net/strparser/strparser.c b/net/strparser/strparser.c index 373836615c57..625acb27efcc 100644 --- a/net/strparser/strparser.c +++ b/net/strparser/strparser.c @@ -35,7 +35,6 @@ struct _strp_msg { */ struct strp_msg strp; int accum_len; - int early_eaten; }; static inline struct _strp_msg *_strp_msg(struct sk_buff *skb) @@ -115,20 +114,6 @@ static int __strp_recv(read_descriptor_t *desc, struct sk_buff *orig_skb, head = strp->skb_head; if (head) { /* Message already in progress */ - - stm = _strp_msg(head); - if (unlikely(stm->early_eaten)) { - /* Already some number of bytes on the receive sock - * data saved in skb_head, just indicate they - * are consumed. - */ - eaten = orig_len <= stm->early_eaten ? - orig_len : stm->early_eaten; - stm->early_eaten -= eaten; - - return eaten; - } - if (unlikely(orig_offset)) { /* Getting data with a non-zero offset when a message is * in progress is not expected. If it does happen, we @@ -297,9 +282,9 @@ static int __strp_recv(read_descriptor_t *desc, struct sk_buff *orig_skb, } stm->accum_len += cand_len; + eaten += cand_len; strp->need_bytes = stm->strp.full_len - stm->accum_len; - stm->early_eaten = cand_len; STRP_STATS_ADD(strp->stats.bytes, cand_len); desc->count = 0; /* Stop reading socket */ break; -- cgit v1.2.3 From 8e75887d321d102200abf3a9fa621e2c10ff4cc5 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 26 Jun 2018 20:13:48 -0700 Subject: bpfilter: include bpfilter_umh in assembly instead of using objcopy What we want here is to embed a user-space program into the kernel. Instead of the complex ELF magic, let's simply wrap it in the assembly with the '.incbin' directive. Signed-off-by: Masahiro Yamada Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller --- net/bpfilter/Makefile | 17 ++--------------- net/bpfilter/bpfilter_kern.c | 11 +++++------ net/bpfilter/bpfilter_umh_blob.S | 7 +++++++ 3 files changed, 14 insertions(+), 21 deletions(-) create mode 100644 net/bpfilter/bpfilter_umh_blob.S diff --git a/net/bpfilter/Makefile b/net/bpfilter/Makefile index 051dc18b8ccb..39c6980b5d99 100644 --- a/net/bpfilter/Makefile +++ b/net/bpfilter/Makefile @@ -15,20 +15,7 @@ ifeq ($(CONFIG_BPFILTER_UMH), y) HOSTLDFLAGS += -static endif -# a bit of elf magic to convert bpfilter_umh binary into a binary blob -# inside bpfilter_umh.o elf file referenced by -# _binary_net_bpfilter_bpfilter_umh_start symbol -# which bpfilter_kern.c passes further into umh blob loader at run-time -quiet_cmd_copy_umh = GEN $@ - cmd_copy_umh = echo ':' > $(obj)/.bpfilter_umh.o.cmd; \ - $(OBJCOPY) -I binary \ - `LC_ALL=C $(OBJDUMP) -f net/bpfilter/bpfilter_umh \ - |awk -F' |,' '/file format/{print "-O",$$NF} \ - /^architecture:/{print "-B",$$2}'` \ - --rename-section .data=.init.rodata $< $@ - -$(obj)/bpfilter_umh.o: $(obj)/bpfilter_umh - $(call cmd,copy_umh) +$(obj)/bpfilter_umh_blob.o: $(obj)/bpfilter_umh obj-$(CONFIG_BPFILTER_UMH) += bpfilter.o -bpfilter-objs += bpfilter_kern.o bpfilter_umh.o +bpfilter-objs += bpfilter_kern.o bpfilter_umh_blob.o diff --git a/net/bpfilter/bpfilter_kern.c b/net/bpfilter/bpfilter_kern.c index 09522573f611..f0fc182d3db7 100644 --- a/net/bpfilter/bpfilter_kern.c +++ b/net/bpfilter/bpfilter_kern.c @@ -10,11 +10,8 @@ #include #include "msgfmt.h" -#define UMH_start _binary_net_bpfilter_bpfilter_umh_start -#define UMH_end _binary_net_bpfilter_bpfilter_umh_end - -extern char UMH_start; -extern char UMH_end; +extern char bpfilter_umh_start; +extern char bpfilter_umh_end; static struct umh_info info; /* since ip_getsockopt() can run in parallel, serialize access to umh */ @@ -93,7 +90,9 @@ static int __init load_umh(void) int err; /* fork usermode process */ - err = fork_usermode_blob(&UMH_start, &UMH_end - &UMH_start, &info); + err = fork_usermode_blob(&bpfilter_umh_start, + &bpfilter_umh_end - &bpfilter_umh_start, + &info); if (err) return err; pr_info("Loaded bpfilter_umh pid %d\n", info.pid); diff --git a/net/bpfilter/bpfilter_umh_blob.S b/net/bpfilter/bpfilter_umh_blob.S new file mode 100644 index 000000000000..40311d10d2f2 --- /dev/null +++ b/net/bpfilter/bpfilter_umh_blob.S @@ -0,0 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + .section .init.rodata, "a" + .global bpfilter_umh_start +bpfilter_umh_start: + .incbin "net/bpfilter/bpfilter_umh" + .global bpfilter_umh_end +bpfilter_umh_end: -- cgit v1.2.3 From 15ecbe94a45ef88491ca459b26efdd02f91edb6d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 27 Jun 2018 08:47:21 -0700 Subject: tcp: add one more quick ack after after ECN events Larry Brakmo proposal ( https://patchwork.ozlabs.org/patch/935233/ tcp: force cwnd at least 2 in tcp_cwnd_reduction) made us rethink about our recent patch removing ~16 quick acks after ECN events. tcp_enter_quickack_mode(sk, 1) makes sure one immediate ack is sent, but in the case the sender cwnd was lowered to 1, we do not want to have a delayed ack for the next packet we will receive. Fixes: 522040ea5fdd ("tcp: do not aggressively quick ack after ECN events") Signed-off-by: Eric Dumazet Reported-by: Neal Cardwell Cc: Lawrence Brakmo Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 355d3dffd021..045d930d01a9 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -265,7 +265,7 @@ static void __tcp_ecn_check_ce(struct sock *sk, const struct sk_buff *skb) * it is probably a retransmit. */ if (tp->ecn_flags & TCP_ECN_SEEN) - tcp_enter_quickack_mode(sk, 1); + tcp_enter_quickack_mode(sk, 2); break; case INET_ECN_CE: if (tcp_ca_needs_ecn(sk)) @@ -273,7 +273,7 @@ static void __tcp_ecn_check_ce(struct sock *sk, const struct sk_buff *skb) if (!(tp->ecn_flags & TCP_ECN_DEMAND_CWR)) { /* Better not delay acks, sender can have a very low cwnd */ - tcp_enter_quickack_mode(sk, 1); + tcp_enter_quickack_mode(sk, 2); tp->ecn_flags |= TCP_ECN_DEMAND_CWR; } tp->ecn_flags |= TCP_ECN_SEEN; -- cgit v1.2.3 From 24ac3a08e65845a098140ff270229dec4a897404 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Wed, 27 Jun 2018 17:59:50 +0200 Subject: net/smc: rebuild nonblocking connect The recent poll change may lead to stalls for non-blocking connecting SMC sockets, since sock_poll_wait is no longer performed on the internal CLC socket, but on the outer SMC socket. kernel_connect() on the internal CLC socket returns with -EINPROGRESS, but the wake up logic does not work in all cases. If the internal CLC socket is still in state TCP_SYN_SENT when polled, sock_poll_wait() from sock_poll() does not sleep. It is supposed to sleep till the state of the internal CLC socket switches to TCP_ESTABLISHED. This problem triggered a redesign of the SMC nonblocking connect logic. This patch introduces a connect worker covering all connect steps followed by a wake up of socket waiters. It allows to get rid of all delays and locks in smc_poll(). Fixes: c0129a061442 ("smc: convert to ->poll_mask") Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/af_smc.c | 91 +++++++++++++++++++++++++++++++++++++++----------------- net/smc/smc.h | 8 +++++ 2 files changed, 71 insertions(+), 28 deletions(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index da7f02edcd37..4d1d4ddb2f49 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -45,6 +45,7 @@ static DEFINE_MUTEX(smc_create_lgr_pending); /* serialize link group */ static void smc_tcp_listen_work(struct work_struct *); +static void smc_connect_work(struct work_struct *); static void smc_set_keepalive(struct sock *sk, int val) { @@ -122,6 +123,12 @@ static int smc_release(struct socket *sock) goto out; smc = smc_sk(sk); + + /* cleanup for a dangling non-blocking connect */ + flush_work(&smc->connect_work); + kfree(smc->connect_info); + smc->connect_info = NULL; + if (sk->sk_state == SMC_LISTEN) /* smc_close_non_accepted() is called and acquires * sock lock for child sockets again @@ -186,6 +193,7 @@ static struct sock *smc_sock_alloc(struct net *net, struct socket *sock, sk->sk_protocol = protocol; smc = smc_sk(sk); INIT_WORK(&smc->tcp_listen_work, smc_tcp_listen_work); + INIT_WORK(&smc->connect_work, smc_connect_work); INIT_DELAYED_WORK(&smc->conn.tx_work, smc_tx_work); INIT_LIST_HEAD(&smc->accept_q); spin_lock_init(&smc->accept_q_lock); @@ -576,6 +584,35 @@ static int __smc_connect(struct smc_sock *smc) return 0; } +static void smc_connect_work(struct work_struct *work) +{ + struct smc_sock *smc = container_of(work, struct smc_sock, + connect_work); + int rc; + + lock_sock(&smc->sk); + rc = kernel_connect(smc->clcsock, &smc->connect_info->addr, + smc->connect_info->alen, smc->connect_info->flags); + if (smc->clcsock->sk->sk_err) { + smc->sk.sk_err = smc->clcsock->sk->sk_err; + goto out; + } + if (rc < 0) { + smc->sk.sk_err = -rc; + goto out; + } + + rc = __smc_connect(smc); + if (rc < 0) + smc->sk.sk_err = -rc; + +out: + smc->sk.sk_state_change(&smc->sk); + kfree(smc->connect_info); + smc->connect_info = NULL; + release_sock(&smc->sk); +} + static int smc_connect(struct socket *sock, struct sockaddr *addr, int alen, int flags) { @@ -605,15 +642,32 @@ static int smc_connect(struct socket *sock, struct sockaddr *addr, smc_copy_sock_settings_to_clc(smc); tcp_sk(smc->clcsock->sk)->syn_smc = 1; - rc = kernel_connect(smc->clcsock, addr, alen, flags); - if (rc) - goto out; + if (flags & O_NONBLOCK) { + if (smc->connect_info) { + rc = -EALREADY; + goto out; + } + smc->connect_info = kzalloc(alen + 2 * sizeof(int), GFP_KERNEL); + if (!smc->connect_info) { + rc = -ENOMEM; + goto out; + } + smc->connect_info->alen = alen; + smc->connect_info->flags = flags ^ O_NONBLOCK; + memcpy(&smc->connect_info->addr, addr, alen); + schedule_work(&smc->connect_work); + rc = -EINPROGRESS; + } else { + rc = kernel_connect(smc->clcsock, addr, alen, flags); + if (rc) + goto out; - rc = __smc_connect(smc); - if (rc < 0) - goto out; - else - rc = 0; /* success cases including fallback */ + rc = __smc_connect(smc); + if (rc < 0) + goto out; + else + rc = 0; /* success cases including fallback */ + } out: release_sock(sk); @@ -1278,34 +1332,17 @@ static __poll_t smc_poll_mask(struct socket *sock, __poll_t events) struct sock *sk = sock->sk; __poll_t mask = 0; struct smc_sock *smc; - int rc; if (!sk) return EPOLLNVAL; smc = smc_sk(sock->sk); - sock_hold(sk); - lock_sock(sk); if ((sk->sk_state == SMC_INIT) || smc->use_fallback) { /* delegate to CLC child sock */ - release_sock(sk); mask = smc->clcsock->ops->poll_mask(smc->clcsock, events); - lock_sock(sk); sk->sk_err = smc->clcsock->sk->sk_err; - if (sk->sk_err) { + if (sk->sk_err) mask |= EPOLLERR; - } else { - /* if non-blocking connect finished ... */ - if (sk->sk_state == SMC_INIT && - mask & EPOLLOUT && - smc->clcsock->sk->sk_state != TCP_CLOSE) { - rc = __smc_connect(smc); - if (rc < 0) - mask |= EPOLLERR; - /* success cases including fallback */ - mask |= EPOLLOUT | EPOLLWRNORM; - } - } } else { if (sk->sk_err) mask |= EPOLLERR; @@ -1334,8 +1371,6 @@ static __poll_t smc_poll_mask(struct socket *sock, __poll_t events) mask |= EPOLLPRI; } - release_sock(sk); - sock_put(sk); return mask; } diff --git a/net/smc/smc.h b/net/smc/smc.h index 51ae1f10d81a..d7ca26570482 100644 --- a/net/smc/smc.h +++ b/net/smc/smc.h @@ -187,11 +187,19 @@ struct smc_connection { struct work_struct close_work; /* peer sent some closing */ }; +struct smc_connect_info { + int flags; + int alen; + struct sockaddr addr; +}; + struct smc_sock { /* smc sock container */ struct sock sk; struct socket *clcsock; /* internal tcp socket */ struct smc_connection conn; /* smc connection */ struct smc_sock *listen_smc; /* listen parent */ + struct smc_connect_info *connect_info; /* connect address & flags */ + struct work_struct connect_work; /* handle non-blocking connect*/ struct work_struct tcp_listen_work;/* handle tcp socket accepts */ struct work_struct smc_listen_work;/* prepare new accept socket */ struct list_head accept_q; /* sockets to be accepted */ -- cgit v1.2.3 From 4205c88eaf17b5f3ee30032d68df55cd5d9077a1 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Wed, 27 Jun 2018 15:03:20 +0100 Subject: net: stmmac: Set DMA buffer size in HW This is clearly a bug. We need to set the DMA buffer size in the HW otherwise corruption can occur when receiving packets. This is probably not occuring because of small MTU values and because HW has a default value internally (which currently is bigger than default buffer size). Signed-off-by: Jose Abreu Cc: David S. Miller Cc: Joao Pinto Cc: Vitor Soares Cc: Giuseppe Cavallaro Cc: Alexandre Torgue Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 12 ++++++++++++ drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h | 2 ++ drivers/net/ethernet/stmicro/stmmac/hwif.h | 3 +++ drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 ++ 4 files changed, 19 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c index d37f17ca62fe..65bc3556bd8f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c @@ -407,6 +407,16 @@ static void dwmac4_enable_tso(void __iomem *ioaddr, bool en, u32 chan) } } +static void dwmac4_set_bfsize(void __iomem *ioaddr, int bfsize, u32 chan) +{ + u32 value = readl(ioaddr + DMA_CHAN_RX_CONTROL(chan)); + + value &= ~DMA_RBSZ_MASK; + value |= (bfsize << DMA_RBSZ_SHIFT) & DMA_RBSZ_MASK; + + writel(value, ioaddr + DMA_CHAN_RX_CONTROL(chan)); +} + const struct stmmac_dma_ops dwmac4_dma_ops = { .reset = dwmac4_dma_reset, .init = dwmac4_dma_init, @@ -431,6 +441,7 @@ const struct stmmac_dma_ops dwmac4_dma_ops = { .set_rx_tail_ptr = dwmac4_set_rx_tail_ptr, .set_tx_tail_ptr = dwmac4_set_tx_tail_ptr, .enable_tso = dwmac4_enable_tso, + .set_bfsize = dwmac4_set_bfsize, }; const struct stmmac_dma_ops dwmac410_dma_ops = { @@ -457,4 +468,5 @@ const struct stmmac_dma_ops dwmac410_dma_ops = { .set_rx_tail_ptr = dwmac4_set_rx_tail_ptr, .set_tx_tail_ptr = dwmac4_set_tx_tail_ptr, .enable_tso = dwmac4_enable_tso, + .set_bfsize = dwmac4_set_bfsize, }; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h index c63c1fe3f26b..22a4a6dbb1a4 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h @@ -120,6 +120,8 @@ /* DMA Rx Channel X Control register defines */ #define DMA_CONTROL_SR BIT(0) +#define DMA_RBSZ_MASK GENMASK(14, 1) +#define DMA_RBSZ_SHIFT 1 /* Interrupt status per channel */ #define DMA_CHAN_STATUS_REB GENMASK(21, 19) diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h index e44e7b26ce82..fe8b536b13f8 100644 --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h @@ -183,6 +183,7 @@ struct stmmac_dma_ops { void (*set_rx_tail_ptr)(void __iomem *ioaddr, u32 tail_ptr, u32 chan); void (*set_tx_tail_ptr)(void __iomem *ioaddr, u32 tail_ptr, u32 chan); void (*enable_tso)(void __iomem *ioaddr, bool en, u32 chan); + void (*set_bfsize)(void __iomem *ioaddr, int bfsize, u32 chan); }; #define stmmac_reset(__priv, __args...) \ @@ -235,6 +236,8 @@ struct stmmac_dma_ops { stmmac_do_void_callback(__priv, dma, set_tx_tail_ptr, __args) #define stmmac_enable_tso(__priv, __args...) \ stmmac_do_void_callback(__priv, dma, enable_tso, __args) +#define stmmac_set_dma_bfsize(__priv, __args...) \ + stmmac_do_void_callback(__priv, dma, set_bfsize, __args) struct mac_device_info; struct net_device; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index cba46b62a1cd..60f59abab009 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1804,6 +1804,8 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv) stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan, rxfifosz, qmode); + stmmac_set_dma_bfsize(priv, priv->ioaddr, priv->dma_buf_sz, + chan); } for (chan = 0; chan < tx_channels_count; chan++) { -- cgit v1.2.3 From ecd53ac2f2c6e42fe732d0aa282192cb6ad3faea Mon Sep 17 00:00:00 2001 From: Dirk Gouders Date: Fri, 22 Jun 2018 21:27:38 +0200 Subject: kconfig: handle P_SYMBOL in print_symbol() Each symbol has a property of type P_SYMBOL since commit 59e89e3ddf85 (kconfig: save location of config symbols). Handle those properties in print_symbol(). Further, place a pointer to print_symbol() in the comment above the list of known property type. Signed-off-by: Dirk Gouders Signed-off-by: Masahiro Yamada --- scripts/kconfig/expr.h | 3 +++ scripts/kconfig/zconf.y | 4 ++++ 2 files changed, 7 insertions(+) diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h index 94a383b21df6..f63b41b0dd49 100644 --- a/scripts/kconfig/expr.h +++ b/scripts/kconfig/expr.h @@ -171,6 +171,9 @@ struct symbol { * config BAZ * int "BAZ Value" * range 1..255 + * + * Please, also check zconf.y:print_symbol() when modifying the + * list of property types! */ enum prop_type { P_UNKNOWN, diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y index ed84d4a8e288..4b68272ebdb9 100644 --- a/scripts/kconfig/zconf.y +++ b/scripts/kconfig/zconf.y @@ -717,6 +717,10 @@ static void print_symbol(FILE *out, struct menu *menu) print_quoted_string(out, prop->text); fputc('\n', out); break; + case P_SYMBOL: + fputs( " symbol ", out); + fprintf(out, "%s\n", prop->sym->name); + break; default: fprintf(out, " unknown prop %d!\n", prop->type); break; -- cgit v1.2.3 From 8b9d27124094964b3c4f8985ba66355ac4d9e842 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sun, 24 Jun 2018 01:41:51 +0900 Subject: kbuild: reword help of LD_DEAD_CODE_DATA_ELIMINATION Since commit 5d20ee3192a5 ("kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled"), HAVE_LD_DEAD_CODE_DATA_ELIMINATION is supposed to be selected by architectures that are capable of this functionality. LD_DEAD_CODE_DATA_ELIMINATION is now users' selection. Update the help message. Signed-off-by: Masahiro Yamada --- init/Kconfig | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/init/Kconfig b/init/Kconfig index 5a52f07259a2..eaad1536647f 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -1051,10 +1051,9 @@ config LD_DEAD_CODE_DATA_ELIMINATION depends on HAVE_LD_DEAD_CODE_DATA_ELIMINATION depends on EXPERT help - Select this if the architecture wants to do dead code and - data elimination with the linker by compiling with - -ffunction-sections -fdata-sections, and linking with - --gc-sections. + Enable this if you want to do dead code and data elimination with + the linker by compiling with -ffunction-sections -fdata-sections, + and linking with --gc-sections. This can reduce on disk and in-memory size of the kernel code and static data, particularly for small configs and -- cgit v1.2.3 From 73d1c580f92b203f4c3a189ee98c917c65712f7e Mon Sep 17 00:00:00 2001 From: Jerry James Date: Sat, 23 Jun 2018 22:49:04 +0200 Subject: kconfig: loop boundary condition fix If buf[-1] just happens to hold the byte 0x0A, then nread can wrap around to (size_t)-1, leading to invalid memory accesses. This has caused segmentation faults when trying to build the latest kernel snapshots for i686 in Fedora: https://bugzilla.redhat.com/show_bug.cgi?id=1592374 Signed-off-by: Jerry James [alexpl@fedoraproject.org: reformatted patch for submission] Signed-off-by: Alexander Ploumistos Signed-off-by: Masahiro Yamada --- scripts/kconfig/preprocess.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/kconfig/preprocess.c b/scripts/kconfig/preprocess.c index 65da87fce907..5ca2df790d3c 100644 --- a/scripts/kconfig/preprocess.c +++ b/scripts/kconfig/preprocess.c @@ -156,7 +156,7 @@ static char *do_shell(int argc, char *argv[]) nread--; /* remove trailing new lines */ - while (buf[nread - 1] == '\n') + while (nread > 0 && buf[nread - 1] == '\n') nread--; buf[nread] = 0; -- cgit v1.2.3 From 682630f00a219a1b0696abe9c0967e660068187b Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Mon, 25 Jun 2018 20:58:17 +0300 Subject: nvme-rdma: fix possible double free of controller async event buffer If reconnect/reset failed where the controller async event buffer was freed, we might end up freeing it again as we call nvme_rdma_destroy_admin_queue again in the remove path. Given that the sequence is guaranteed to serialize by .ctrl_stop, we simply set ctrl->async_event_sqe.data to NULL and don't free it in future visits. Reported-by: Max Gurtovoy Tested-by: Max Gurtovoy Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig --- drivers/nvme/host/rdma.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 9544625c0b7d..518c5b09038c 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -732,8 +732,11 @@ static void nvme_rdma_destroy_admin_queue(struct nvme_rdma_ctrl *ctrl, blk_cleanup_queue(ctrl->ctrl.admin_q); nvme_rdma_free_tagset(&ctrl->ctrl, ctrl->ctrl.admin_tagset); } - nvme_rdma_free_qe(ctrl->device->dev, &ctrl->async_event_sqe, - sizeof(struct nvme_command), DMA_TO_DEVICE); + if (ctrl->async_event_sqe.data) { + nvme_rdma_free_qe(ctrl->device->dev, &ctrl->async_event_sqe, + sizeof(struct nvme_command), DMA_TO_DEVICE); + ctrl->async_event_sqe.data = NULL; + } nvme_rdma_free_queue(&ctrl->queues[0]); } -- cgit v1.2.3 From 704e38303153c797d66c41bbe8325202f549b53c Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 18 May 2018 16:27:15 +0200 Subject: parisc: Drop struct sigaction from not exported header file This header file isn't exported to userspace, so there is no benefit in defining struct sigaction for userspace here. Signed-off-by: Helge Deller --- arch/parisc/include/asm/signal.h | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/parisc/include/asm/signal.h b/arch/parisc/include/asm/signal.h index eeb5c8858663..715c96ba2ec8 100644 --- a/arch/parisc/include/asm/signal.h +++ b/arch/parisc/include/asm/signal.h @@ -21,14 +21,6 @@ typedef struct { unsigned long sig[_NSIG_WORDS]; } sigset_t; -#ifndef __KERNEL__ -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - sigset_t sa_mask; /* mask last for extensibility */ -}; -#endif - #include #endif /* !__ASSEMBLY */ -- cgit v1.2.3 From 1c971f39e62222d567f179ccaa1a186f1c203b52 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 15 Jun 2018 22:33:44 +0200 Subject: parisc: Mark 16kB and 64kB page sizes BROKEN A full boot only succeeds with 4kB page sizes currently. For 16kB and 64kB page size support somone needs to fix the LBA PCI code at least, so mark those broken for now. Signed-off-by: Helge Deller --- arch/parisc/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index c480770fabcd..a9a507a19540 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -244,11 +244,11 @@ config PARISC_PAGE_SIZE_4KB config PARISC_PAGE_SIZE_16KB bool "16KB" - depends on PA8X00 + depends on PA8X00 && BROKEN config PARISC_PAGE_SIZE_64KB bool "64KB" - depends on PA8X00 + depends on PA8X00 && BROKEN endchoice -- cgit v1.2.3 From 5e791d2e4785f9ec7da4a02b9e8d00dace9e6917 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 29 May 2018 22:38:01 +0300 Subject: parisc: Convert printk(KERN_LEVEL) to pr_lvl() Convert printk(KERN_LEVEL) type of calls to pr_lvl() macros. While here, - convert printk() to pr_info() - join back string literal to be on one line - use %*phN (note, it gives 1 byte more for sake of simplicity) Signed-off-by: Andy Shevchenko Signed-off-by: Helge Deller --- arch/parisc/kernel/drivers.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index e0e1c9775c32..5eb979d04b90 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -154,17 +154,14 @@ int register_parisc_driver(struct parisc_driver *driver) { /* FIXME: we need this because apparently the sti * driver can be registered twice */ - if(driver->drv.name) { - printk(KERN_WARNING - "BUG: skipping previously registered driver %s\n", - driver->name); + if (driver->drv.name) { + pr_warn("BUG: skipping previously registered driver %s\n", + driver->name); return 1; } if (!driver->probe) { - printk(KERN_WARNING - "BUG: driver %s has no probe routine\n", - driver->name); + pr_warn("BUG: driver %s has no probe routine\n", driver->name); return 1; } @@ -491,12 +488,9 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) dev = create_parisc_device(mod_path); if (dev->id.hw_type != HPHW_FAULTY) { - printk(KERN_ERR "Two devices have hardware path [%s]. " - "IODC data for second device: " - "%02x%02x%02x%02x%02x%02x\n" - "Rearranging GSC cards sometimes helps\n", - parisc_pathname(dev), iodc_data[0], iodc_data[1], - iodc_data[3], iodc_data[4], iodc_data[5], iodc_data[6]); + pr_err("Two devices have hardware path [%s]. IODC data for second device: %7phN\n" + "Rearranging GSC cards sometimes helps\n", + parisc_pathname(dev), iodc_data); return NULL; } @@ -528,8 +522,7 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) * the keyboard controller */ if ((hpa & 0xfff) == 0 && insert_resource(&iomem_resource, &dev->hpa)) - printk("Unable to claim HPA %lx for device %s\n", - hpa, name); + pr_warn("Unable to claim HPA %lx for device %s\n", hpa, name); return dev; } @@ -875,7 +868,7 @@ static void print_parisc_device(struct parisc_device *dev) static int count; print_pa_hwpath(dev, hw_path); - printk(KERN_INFO "%d. %s at 0x%px [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }", + pr_info("%d. %s at 0x%px [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }", ++count, dev->name, (void*) dev->hpa.start, hw_path, dev->id.hw_type, dev->id.hversion_rev, dev->id.hversion, dev->id.sversion); -- cgit v1.2.3 From 435d34c7a48de5e89047ef9c7dce6528831b258b Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 15 Jun 2018 22:38:22 +0200 Subject: parisc: Default to 4 SMP CPUs I haven't seen any real SMP machine yet with > 4 CPUs (we don't suport SuperDomes yet), so reducing the default maximum number of CPUs may speed up various bitop functions which depend on number of CPUs in the system. bload-o-meter on a typical 64-bit kernel shows: Data: add/remove: 0/0 grow/shrink: 0/10 up/down: 0/-3724 (-3724) Total: Before=1910404, After=1906680, chg -0.19% Code: add/remove: 0/2 grow/shrink: 42/38 up/down: 2320/-3500 (-1180) Total: Before=11053099, After=11051919, chg -0.01% Signed-off-by: Helge Deller --- arch/parisc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index a9a507a19540..17526bebcbd2 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -347,7 +347,7 @@ config NR_CPUS int "Maximum number of CPUs (2-32)" range 2 32 depends on SMP - default "32" + default "4" endmenu -- cgit v1.2.3 From 2765b3edc41bdf18960ca7e6b656fb933ac191d6 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 28 Jun 2018 17:41:58 +0200 Subject: parisc: Wire up io_pgetevents syscall Signed-off-by: Helge Deller --- arch/parisc/include/uapi/asm/unistd.h | 3 ++- arch/parisc/kernel/syscall_table.S | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/parisc/include/uapi/asm/unistd.h b/arch/parisc/include/uapi/asm/unistd.h index 4872e77aa96b..dc77c5a51db7 100644 --- a/arch/parisc/include/uapi/asm/unistd.h +++ b/arch/parisc/include/uapi/asm/unistd.h @@ -364,8 +364,9 @@ #define __NR_preadv2 (__NR_Linux + 347) #define __NR_pwritev2 (__NR_Linux + 348) #define __NR_statx (__NR_Linux + 349) +#define __NR_io_pgetevents (__NR_Linux + 350) -#define __NR_Linux_syscalls (__NR_statx + 1) +#define __NR_Linux_syscalls (__NR_io_pgetevents + 1) #define __IGNORE_select /* newselect */ diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 6308749359e4..fe3f2a49d2b1 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -445,6 +445,7 @@ ENTRY_COMP(preadv2) ENTRY_COMP(pwritev2) ENTRY_SAME(statx) + ENTRY_COMP(io_pgetevents) /* 350 */ .ifne (. - 90b) - (__NR_Linux_syscalls * (91b - 90b)) -- cgit v1.2.3 From 297ba57dcdec7ea37e702bcf1a577ac32a034e21 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Wed, 27 Jun 2018 12:55:18 -0700 Subject: block: Fix cloning of requests with a special payload This patch avoids that removing a path controlled by the dm-mpath driver while mkfs is running triggers the following kernel bug: kernel BUG at block/blk-core.c:3347! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 20 PID: 24369 Comm: mkfs.ext4 Not tainted 4.18.0-rc1-dbg+ #2 RIP: 0010:blk_end_request_all+0x68/0x70 Call Trace: dm_softirq_done+0x326/0x3d0 [dm_mod] blk_done_softirq+0x19b/0x1e0 __do_softirq+0x128/0x60d irq_exit+0x100/0x110 smp_call_function_single_interrupt+0x90/0x330 call_function_single_interrupt+0xf/0x20 Fixes: f9d03f96b988 ("block: improve handling of the magic discard payload") Reviewed-by: Ming Lei Reviewed-by: Christoph Hellwig Acked-by: Mike Snitzer Signed-off-by: Bart Van Assche Cc: Hannes Reinecke Cc: Johannes Thumshirn Cc: Signed-off-by: Jens Axboe --- block/blk-core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/block/blk-core.c b/block/blk-core.c index afd2596ea3d3..f84a9b7b6f5a 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -3473,6 +3473,10 @@ static void __blk_rq_prep_clone(struct request *dst, struct request *src) dst->cpu = src->cpu; dst->__sector = blk_rq_pos(src); dst->__data_len = blk_rq_bytes(src); + if (src->rq_flags & RQF_SPECIAL_PAYLOAD) { + dst->rq_flags |= RQF_SPECIAL_PAYLOAD; + dst->special_vec = src->special_vec; + } dst->nr_phys_segments = src->nr_phys_segments; dst->ioprio = src->ioprio; dst->extra_len = src->extra_len; -- cgit v1.2.3 From f904390ac8b2657b97ba3c1ad2b1be0822fa62ad Mon Sep 17 00:00:00 2001 From: oscardagrach Date: Wed, 13 Jun 2018 10:13:05 -0500 Subject: arm64: dts: hikey: Define wl1835 power capabilities These properties are required for compatibility with runtime PM. Without these properties, MMC host controller will not be aware of power capabilities. When the wlcore driver attempts to power on the device, it will erroneously fail with -EACCES. Fixes: 60f36637bbbd ("wlcore: sdio: allow pm to handle sdio power") Signed-off-by: Ryan Grachek Tested-by: John Stultz Acked-by: John Stultz Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index edb4ee0b8896..7f12624f6c8e 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -322,6 +322,8 @@ dwmmc_2: dwmmc2@f723f000 { bus-width = <0x4>; non-removable; + cap-power-off-card; + keep-power-in-suspend; vmmc-supply = <®_vdd_3v3>; mmc-pwrseq = <&wl1835_pwrseq>; -- cgit v1.2.3 From a30449eb3ac908f26b4bc963a58039a5f2725ffa Mon Sep 17 00:00:00 2001 From: oscardagrach Date: Wed, 13 Jun 2018 13:03:21 -0500 Subject: arm64: dts: hikey960: Define wl1837 power capabilities These properties are required for compatibility with runtime PM. Without these properties, MMC host controller will not be aware of power capabilities. When the wlcore driver attempts to power on the device, it will erroneously fail with -EACCES. This fixes a regression found here: https://lkml.org/lkml/2018/6/12/930 Fixes: 60f36637bbbd ("wlcore: sdio: allow pm to handle sdio power") Signed-off-by: Ryan Grachek Tested-by: John Stultz Acked-by: John Stultz Tested-by: Valentin Schneider Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index c6999624ed8a..68c5a6c819ae 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -585,6 +585,8 @@ vmmc-supply = <&wlan_en>; ti,non-removable; non-removable; + cap-power-off-card; + keep-power-in-suspend; #address-cells = <0x1>; #size-cells = <0x0>; status = "ok"; -- cgit v1.2.3 From a11e1d432b51f63ba698d044441284a661f01144 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 28 Jun 2018 09:43:44 -0700 Subject: Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLL The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro Cc: Christoph Hellwig Signed-off-by: Linus Torvalds --- Documentation/filesystems/Locking | 7 +- Documentation/filesystems/vfs.txt | 13 ---- crypto/af_alg.c | 13 +++- crypto/algif_aead.c | 4 +- crypto/algif_skcipher.c | 4 +- drivers/char/random.c | 29 ++++---- drivers/isdn/mISDN/socket.c | 2 +- drivers/net/ppp/pppoe.c | 2 +- fs/aio.c | 148 +------------------------------------- fs/eventfd.c | 19 ++--- fs/eventpoll.c | 15 ++-- fs/pipe.c | 22 +++--- fs/select.c | 23 ------ fs/timerfd.c | 22 +++--- include/crypto/if_alg.h | 3 +- include/linux/fs.h | 2 - include/linux/net.h | 1 - include/linux/poll.h | 12 ++-- include/linux/skbuff.h | 3 +- include/net/bluetooth/bluetooth.h | 2 +- include/net/iucv/af_iucv.h | 2 + include/net/sctp/sctp.h | 3 +- include/net/tcp.h | 3 +- include/net/tls.h | 6 +- include/net/udp.h | 2 +- include/uapi/linux/aio_abi.h | 8 ++- net/appletalk/ddp.c | 2 +- net/atm/common.c | 11 ++- net/atm/common.h | 2 +- net/atm/pvc.c | 2 +- net/atm/svc.c | 2 +- net/ax25/af_ax25.c | 2 +- net/bluetooth/af_bluetooth.c | 7 +- net/bluetooth/hci_sock.c | 2 +- net/bluetooth/l2cap_sock.c | 2 +- net/bluetooth/rfcomm/sock.c | 2 +- net/bluetooth/sco.c | 2 +- net/caif/caif_socket.c | 12 ++-- net/can/bcm.c | 2 +- net/can/raw.c | 2 +- net/core/datagram.c | 13 ++-- net/dccp/dccp.h | 3 +- net/dccp/ipv4.c | 2 +- net/dccp/ipv6.c | 2 +- net/dccp/proto.c | 13 +++- net/decnet/af_decnet.c | 6 +- net/ieee802154/socket.c | 4 +- net/ipv4/af_inet.c | 8 +-- net/ipv4/tcp.c | 23 ++++-- net/ipv4/udp.c | 10 +-- net/ipv6/af_inet6.c | 4 +- net/ipv6/raw.c | 4 +- net/iucv/af_iucv.c | 7 +- net/kcm/kcmsock.c | 10 +-- net/key/af_key.c | 2 +- net/l2tp/l2tp_ip.c | 2 +- net/l2tp/l2tp_ip6.c | 2 +- net/l2tp/l2tp_ppp.c | 2 +- net/llc/af_llc.c | 2 +- net/netlink/af_netlink.c | 2 +- net/netrom/af_netrom.c | 2 +- net/nfc/llcp_sock.c | 9 ++- net/nfc/rawsock.c | 4 +- net/packet/af_packet.c | 9 +-- net/phonet/socket.c | 9 ++- net/qrtr/qrtr.c | 2 +- net/rose/af_rose.c | 2 +- net/rxrpc/af_rxrpc.c | 10 ++- net/sctp/ipv6.c | 2 +- net/sctp/protocol.c | 2 +- net/sctp/socket.c | 4 +- net/smc/af_smc.c | 12 +++- net/socket.c | 48 ++----------- net/tipc/socket.c | 14 ++-- net/tls/tls_main.c | 2 +- net/tls/tls_sw.c | 19 ++--- net/unix/af_unix.c | 30 +++++--- net/vmw_vsock/af_vsock.c | 19 +++-- net/x25/af_x25.c | 2 +- net/xdp/xsk.c | 7 +- 80 files changed, 301 insertions(+), 450 deletions(-) diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 2c391338c675..37bf0a9de75c 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -441,8 +441,6 @@ prototypes: int (*iterate) (struct file *, struct dir_context *); int (*iterate_shared) (struct file *, struct dir_context *); __poll_t (*poll) (struct file *, struct poll_table_struct *); - struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t); - __poll_t (*poll_mask) (struct file *, __poll_t); long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); long (*compat_ioctl) (struct file *, unsigned int, unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); @@ -473,7 +471,7 @@ prototypes: }; locking rules: - All except for ->poll_mask may block. + All may block. ->llseek() locking has moved from llseek to the individual llseek implementations. If your fs is not using generic_file_llseek, you @@ -505,9 +503,6 @@ in sys_read() and friends. the lease within the individual filesystem to record the result of the operation -->poll_mask can be called with or without the waitqueue lock for the waitqueue -returned from ->get_poll_head. - --------------------------- dquot_operations ------------------------------- prototypes: int (*write_dquot) (struct dquot *); diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 829a7b7857a4..f608180ad59d 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -857,8 +857,6 @@ struct file_operations { ssize_t (*write_iter) (struct kiocb *, struct iov_iter *); int (*iterate) (struct file *, struct dir_context *); __poll_t (*poll) (struct file *, struct poll_table_struct *); - struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t); - __poll_t (*poll_mask) (struct file *, __poll_t); long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); long (*compat_ioctl) (struct file *, unsigned int, unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); @@ -903,17 +901,6 @@ otherwise noted. activity on this file and (optionally) go to sleep until there is activity. Called by the select(2) and poll(2) system calls - get_poll_head: Returns the struct wait_queue_head that callers can - wait on. Callers need to check the returned events using ->poll_mask - once woken. Can return NULL to indicate polling is not supported, - or any error code using the ERR_PTR convention to indicate that a - grave error occured and ->poll_mask shall not be called. - - poll_mask: return the mask of EPOLL* values describing the file descriptor - state. Called either before going to sleep on the waitqueue returned by - get_poll_head, or after it has been woken. If ->get_poll_head and - ->poll_mask are implemented ->poll does not need to be implement. - unlocked_ioctl: called by the ioctl(2) system call. compat_ioctl: called by the ioctl(2) system call when 32 bit system calls diff --git a/crypto/af_alg.c b/crypto/af_alg.c index 49fa8582138b..314c52c967e5 100644 --- a/crypto/af_alg.c +++ b/crypto/af_alg.c @@ -1060,12 +1060,19 @@ void af_alg_async_cb(struct crypto_async_request *_req, int err) } EXPORT_SYMBOL_GPL(af_alg_async_cb); -__poll_t af_alg_poll_mask(struct socket *sock, __poll_t events) +/** + * af_alg_poll - poll system call handler + */ +__poll_t af_alg_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; struct alg_sock *ask = alg_sk(sk); struct af_alg_ctx *ctx = ask->private; - __poll_t mask = 0; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; if (!ctx->more || ctx->used) mask |= EPOLLIN | EPOLLRDNORM; @@ -1075,7 +1082,7 @@ __poll_t af_alg_poll_mask(struct socket *sock, __poll_t events) return mask; } -EXPORT_SYMBOL_GPL(af_alg_poll_mask); +EXPORT_SYMBOL_GPL(af_alg_poll); /** * af_alg_alloc_areq - allocate struct af_alg_async_req diff --git a/crypto/algif_aead.c b/crypto/algif_aead.c index 825524f27438..c40a8c7ee8ae 100644 --- a/crypto/algif_aead.c +++ b/crypto/algif_aead.c @@ -375,7 +375,7 @@ static struct proto_ops algif_aead_ops = { .sendmsg = aead_sendmsg, .sendpage = af_alg_sendpage, .recvmsg = aead_recvmsg, - .poll_mask = af_alg_poll_mask, + .poll = af_alg_poll, }; static int aead_check_key(struct socket *sock) @@ -471,7 +471,7 @@ static struct proto_ops algif_aead_ops_nokey = { .sendmsg = aead_sendmsg_nokey, .sendpage = aead_sendpage_nokey, .recvmsg = aead_recvmsg_nokey, - .poll_mask = af_alg_poll_mask, + .poll = af_alg_poll, }; static void *aead_bind(const char *name, u32 type, u32 mask) diff --git a/crypto/algif_skcipher.c b/crypto/algif_skcipher.c index 4c04eb9888ad..cfdaab2b7d76 100644 --- a/crypto/algif_skcipher.c +++ b/crypto/algif_skcipher.c @@ -206,7 +206,7 @@ static struct proto_ops algif_skcipher_ops = { .sendmsg = skcipher_sendmsg, .sendpage = af_alg_sendpage, .recvmsg = skcipher_recvmsg, - .poll_mask = af_alg_poll_mask, + .poll = af_alg_poll, }; static int skcipher_check_key(struct socket *sock) @@ -302,7 +302,7 @@ static struct proto_ops algif_skcipher_ops_nokey = { .sendmsg = skcipher_sendmsg_nokey, .sendpage = skcipher_sendpage_nokey, .recvmsg = skcipher_recvmsg_nokey, - .poll_mask = af_alg_poll_mask, + .poll = af_alg_poll, }; static void *skcipher_bind(const char *name, u32 type, u32 mask) diff --git a/drivers/char/random.c b/drivers/char/random.c index a8fb0020ba5c..cd888d4ee605 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -402,7 +402,8 @@ static struct poolinfo { /* * Static global variables */ -static DECLARE_WAIT_QUEUE_HEAD(random_wait); +static DECLARE_WAIT_QUEUE_HEAD(random_read_wait); +static DECLARE_WAIT_QUEUE_HEAD(random_write_wait); static struct fasync_struct *fasync; static DEFINE_SPINLOCK(random_ready_list_lock); @@ -721,8 +722,8 @@ retry: /* should we wake readers? */ if (entropy_bits >= random_read_wakeup_bits && - wq_has_sleeper(&random_wait)) { - wake_up_interruptible_poll(&random_wait, POLLIN); + wq_has_sleeper(&random_read_wait)) { + wake_up_interruptible(&random_read_wait); kill_fasync(&fasync, SIGIO, POLL_IN); } /* If the input pool is getting full, send some @@ -1396,7 +1397,7 @@ retry: trace_debit_entropy(r->name, 8 * ibytes); if (ibytes && (r->entropy_count >> ENTROPY_SHIFT) < random_write_wakeup_bits) { - wake_up_interruptible_poll(&random_wait, POLLOUT); + wake_up_interruptible(&random_write_wait); kill_fasync(&fasync, SIGIO, POLL_OUT); } @@ -1838,7 +1839,7 @@ _random_read(int nonblock, char __user *buf, size_t nbytes) if (nonblock) return -EAGAIN; - wait_event_interruptible(random_wait, + wait_event_interruptible(random_read_wait, ENTROPY_BITS(&input_pool) >= random_read_wakeup_bits); if (signal_pending(current)) @@ -1875,17 +1876,14 @@ urandom_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos) return ret; } -static struct wait_queue_head * -random_get_poll_head(struct file *file, __poll_t events) -{ - return &random_wait; -} - static __poll_t -random_poll_mask(struct file *file, __poll_t events) +random_poll(struct file *file, poll_table * wait) { - __poll_t mask = 0; + __poll_t mask; + poll_wait(file, &random_read_wait, wait); + poll_wait(file, &random_write_wait, wait); + mask = 0; if (ENTROPY_BITS(&input_pool) >= random_read_wakeup_bits) mask |= EPOLLIN | EPOLLRDNORM; if (ENTROPY_BITS(&input_pool) < random_write_wakeup_bits) @@ -1992,8 +1990,7 @@ static int random_fasync(int fd, struct file *filp, int on) const struct file_operations random_fops = { .read = random_read, .write = random_write, - .get_poll_head = random_get_poll_head, - .poll_mask = random_poll_mask, + .poll = random_poll, .unlocked_ioctl = random_ioctl, .fasync = random_fasync, .llseek = noop_llseek, @@ -2326,7 +2323,7 @@ void add_hwgenerator_randomness(const char *buffer, size_t count, * We'll be woken up again once below random_write_wakeup_thresh, * or when the calling thread is about to terminate. */ - wait_event_interruptible(random_wait, kthread_should_stop() || + wait_event_interruptible(random_write_wait, kthread_should_stop() || ENTROPY_BITS(&input_pool) <= random_write_wakeup_bits); mix_pool_bytes(poolp, buffer, count); credit_entropy_bits(poolp, entropy); diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c index 98f90aadd141..18c0a1281914 100644 --- a/drivers/isdn/mISDN/socket.c +++ b/drivers/isdn/mISDN/socket.c @@ -588,7 +588,7 @@ static const struct proto_ops data_sock_ops = { .getname = data_sock_getname, .sendmsg = mISDN_sock_sendmsg, .recvmsg = mISDN_sock_recvmsg, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .listen = sock_no_listen, .shutdown = sock_no_shutdown, .setsockopt = data_sock_setsockopt, diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c index de51e8f70f44..ce61231e96ea 100644 --- a/drivers/net/ppp/pppoe.c +++ b/drivers/net/ppp/pppoe.c @@ -1107,7 +1107,7 @@ static const struct proto_ops pppoe_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = pppoe_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .listen = sock_no_listen, .shutdown = sock_no_shutdown, .setsockopt = sock_no_setsockopt, diff --git a/fs/aio.c b/fs/aio.c index e1d20124ec0e..210df9da1283 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -5,7 +5,6 @@ * Implements an efficient asynchronous io interface. * * Copyright 2000, 2001, 2002 Red Hat, Inc. All Rights Reserved. - * Copyright 2018 Christoph Hellwig. * * See ../COPYING for licensing terms. */ @@ -165,22 +164,10 @@ struct fsync_iocb { bool datasync; }; -struct poll_iocb { - struct file *file; - __poll_t events; - struct wait_queue_head *head; - - union { - struct wait_queue_entry wait; - struct work_struct work; - }; -}; - struct aio_kiocb { union { struct kiocb rw; struct fsync_iocb fsync; - struct poll_iocb poll; }; struct kioctx *ki_ctx; @@ -1590,6 +1577,7 @@ static int aio_fsync(struct fsync_iocb *req, struct iocb *iocb, bool datasync) if (unlikely(iocb->aio_buf || iocb->aio_offset || iocb->aio_nbytes || iocb->aio_rw_flags)) return -EINVAL; + req->file = fget(iocb->aio_fildes); if (unlikely(!req->file)) return -EBADF; @@ -1604,137 +1592,6 @@ static int aio_fsync(struct fsync_iocb *req, struct iocb *iocb, bool datasync) return 0; } -/* need to use list_del_init so we can check if item was present */ -static inline bool __aio_poll_remove(struct poll_iocb *req) -{ - if (list_empty(&req->wait.entry)) - return false; - list_del_init(&req->wait.entry); - return true; -} - -static inline void __aio_poll_complete(struct aio_kiocb *iocb, __poll_t mask) -{ - fput(iocb->poll.file); - aio_complete(iocb, mangle_poll(mask), 0); -} - -static void aio_poll_work(struct work_struct *work) -{ - struct aio_kiocb *iocb = container_of(work, struct aio_kiocb, poll.work); - - if (!list_empty_careful(&iocb->ki_list)) - aio_remove_iocb(iocb); - __aio_poll_complete(iocb, iocb->poll.events); -} - -static int aio_poll_cancel(struct kiocb *iocb) -{ - struct aio_kiocb *aiocb = container_of(iocb, struct aio_kiocb, rw); - struct poll_iocb *req = &aiocb->poll; - struct wait_queue_head *head = req->head; - bool found = false; - - spin_lock(&head->lock); - found = __aio_poll_remove(req); - spin_unlock(&head->lock); - - if (found) { - req->events = 0; - INIT_WORK(&req->work, aio_poll_work); - schedule_work(&req->work); - } - return 0; -} - -static int aio_poll_wake(struct wait_queue_entry *wait, unsigned mode, int sync, - void *key) -{ - struct poll_iocb *req = container_of(wait, struct poll_iocb, wait); - struct aio_kiocb *iocb = container_of(req, struct aio_kiocb, poll); - struct file *file = req->file; - __poll_t mask = key_to_poll(key); - - assert_spin_locked(&req->head->lock); - - /* for instances that support it check for an event match first: */ - if (mask && !(mask & req->events)) - return 0; - - mask = file->f_op->poll_mask(file, req->events) & req->events; - if (!mask) - return 0; - - __aio_poll_remove(req); - - /* - * Try completing without a context switch if we can acquire ctx_lock - * without spinning. Otherwise we need to defer to a workqueue to - * avoid a deadlock due to the lock order. - */ - if (spin_trylock(&iocb->ki_ctx->ctx_lock)) { - list_del_init(&iocb->ki_list); - spin_unlock(&iocb->ki_ctx->ctx_lock); - - __aio_poll_complete(iocb, mask); - } else { - req->events = mask; - INIT_WORK(&req->work, aio_poll_work); - schedule_work(&req->work); - } - - return 1; -} - -static ssize_t aio_poll(struct aio_kiocb *aiocb, struct iocb *iocb) -{ - struct kioctx *ctx = aiocb->ki_ctx; - struct poll_iocb *req = &aiocb->poll; - __poll_t mask; - - /* reject any unknown events outside the normal event mask. */ - if ((u16)iocb->aio_buf != iocb->aio_buf) - return -EINVAL; - /* reject fields that are not defined for poll */ - if (iocb->aio_offset || iocb->aio_nbytes || iocb->aio_rw_flags) - return -EINVAL; - - req->events = demangle_poll(iocb->aio_buf) | EPOLLERR | EPOLLHUP; - req->file = fget(iocb->aio_fildes); - if (unlikely(!req->file)) - return -EBADF; - if (!file_has_poll_mask(req->file)) - goto out_fail; - - req->head = req->file->f_op->get_poll_head(req->file, req->events); - if (!req->head) - goto out_fail; - if (IS_ERR(req->head)) { - mask = EPOLLERR; - goto done; - } - - init_waitqueue_func_entry(&req->wait, aio_poll_wake); - aiocb->ki_cancel = aio_poll_cancel; - - spin_lock_irq(&ctx->ctx_lock); - spin_lock(&req->head->lock); - mask = req->file->f_op->poll_mask(req->file, req->events) & req->events; - if (!mask) { - __add_wait_queue(req->head, &req->wait); - list_add_tail(&aiocb->ki_list, &ctx->active_reqs); - } - spin_unlock(&req->head->lock); - spin_unlock_irq(&ctx->ctx_lock); -done: - if (mask) - __aio_poll_complete(aiocb, mask); - return 0; -out_fail: - fput(req->file); - return -EINVAL; /* same as no support for IOCB_CMD_POLL */ -} - static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, bool compat) { @@ -1808,9 +1665,6 @@ static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, case IOCB_CMD_FDSYNC: ret = aio_fsync(&req->fsync, &iocb, true); break; - case IOCB_CMD_POLL: - ret = aio_poll(req, &iocb); - break; default: pr_debug("invalid aio operation %d\n", iocb.aio_lio_opcode); ret = -EINVAL; diff --git a/fs/eventfd.c b/fs/eventfd.c index ceb1031f1cac..08d3bd602f73 100644 --- a/fs/eventfd.c +++ b/fs/eventfd.c @@ -101,20 +101,14 @@ static int eventfd_release(struct inode *inode, struct file *file) return 0; } -static struct wait_queue_head * -eventfd_get_poll_head(struct file *file, __poll_t events) -{ - struct eventfd_ctx *ctx = file->private_data; - - return &ctx->wqh; -} - -static __poll_t eventfd_poll_mask(struct file *file, __poll_t eventmask) +static __poll_t eventfd_poll(struct file *file, poll_table *wait) { struct eventfd_ctx *ctx = file->private_data; __poll_t events = 0; u64 count; + poll_wait(file, &ctx->wqh, wait); + /* * All writes to ctx->count occur within ctx->wqh.lock. This read * can be done outside ctx->wqh.lock because we know that poll_wait @@ -156,11 +150,11 @@ static __poll_t eventfd_poll_mask(struct file *file, __poll_t eventmask) count = READ_ONCE(ctx->count); if (count > 0) - events |= (EPOLLIN & eventmask); + events |= EPOLLIN; if (count == ULLONG_MAX) events |= EPOLLERR; if (ULLONG_MAX - 1 > count) - events |= (EPOLLOUT & eventmask); + events |= EPOLLOUT; return events; } @@ -311,8 +305,7 @@ static const struct file_operations eventfd_fops = { .show_fdinfo = eventfd_show_fdinfo, #endif .release = eventfd_release, - .get_poll_head = eventfd_get_poll_head, - .poll_mask = eventfd_poll_mask, + .poll = eventfd_poll, .read = eventfd_read, .write = eventfd_write, .llseek = noop_llseek, diff --git a/fs/eventpoll.c b/fs/eventpoll.c index ea4436f409fb..67db22fe99c5 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -922,18 +922,14 @@ static __poll_t ep_read_events_proc(struct eventpoll *ep, struct list_head *head return 0; } -static struct wait_queue_head *ep_eventpoll_get_poll_head(struct file *file, - __poll_t eventmask) -{ - struct eventpoll *ep = file->private_data; - return &ep->poll_wait; -} - -static __poll_t ep_eventpoll_poll_mask(struct file *file, __poll_t eventmask) +static __poll_t ep_eventpoll_poll(struct file *file, poll_table *wait) { struct eventpoll *ep = file->private_data; int depth = 0; + /* Insert inside our poll wait queue */ + poll_wait(file, &ep->poll_wait, wait); + /* * Proceed to find out if wanted events are really available inside * the ready list. @@ -972,8 +968,7 @@ static const struct file_operations eventpoll_fops = { .show_fdinfo = ep_show_fdinfo, #endif .release = ep_eventpoll_release, - .get_poll_head = ep_eventpoll_get_poll_head, - .poll_mask = ep_eventpoll_poll_mask, + .poll = ep_eventpoll_poll, .llseek = noop_llseek, }; diff --git a/fs/pipe.c b/fs/pipe.c index bb0840e234f3..39d6f431da83 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -509,22 +509,19 @@ static long pipe_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) } } -static struct wait_queue_head * -pipe_get_poll_head(struct file *filp, __poll_t events) -{ - struct pipe_inode_info *pipe = filp->private_data; - - return &pipe->wait; -} - /* No kernel lock held - fine */ -static __poll_t pipe_poll_mask(struct file *filp, __poll_t events) +static __poll_t +pipe_poll(struct file *filp, poll_table *wait) { + __poll_t mask; struct pipe_inode_info *pipe = filp->private_data; - int nrbufs = pipe->nrbufs; - __poll_t mask = 0; + int nrbufs; + + poll_wait(filp, &pipe->wait, wait); /* Reading only -- no need for acquiring the semaphore. */ + nrbufs = pipe->nrbufs; + mask = 0; if (filp->f_mode & FMODE_READ) { mask = (nrbufs > 0) ? EPOLLIN | EPOLLRDNORM : 0; if (!pipe->writers && filp->f_version != pipe->w_counter) @@ -1023,8 +1020,7 @@ const struct file_operations pipefifo_fops = { .llseek = no_llseek, .read_iter = pipe_read, .write_iter = pipe_write, - .get_poll_head = pipe_get_poll_head, - .poll_mask = pipe_poll_mask, + .poll = pipe_poll, .unlocked_ioctl = pipe_ioctl, .release = pipe_release, .fasync = pipe_fasync, diff --git a/fs/select.c b/fs/select.c index 317891ff8165..4a6b6e4b21cb 100644 --- a/fs/select.c +++ b/fs/select.c @@ -34,29 +34,6 @@ #include -__poll_t vfs_poll(struct file *file, struct poll_table_struct *pt) -{ - if (file->f_op->poll) { - return file->f_op->poll(file, pt); - } else if (file_has_poll_mask(file)) { - unsigned int events = poll_requested_events(pt); - struct wait_queue_head *head; - - if (pt && pt->_qproc) { - head = file->f_op->get_poll_head(file, events); - if (!head) - return DEFAULT_POLLMASK; - if (IS_ERR(head)) - return EPOLLERR; - pt->_qproc(file, head, pt); - } - - return file->f_op->poll_mask(file, events); - } else { - return DEFAULT_POLLMASK; - } -} -EXPORT_SYMBOL_GPL(vfs_poll); /* * Estimate expected accuracy in ns from a timeval. diff --git a/fs/timerfd.c b/fs/timerfd.c index d84a2bee4f82..cdad49da3ff7 100644 --- a/fs/timerfd.c +++ b/fs/timerfd.c @@ -226,20 +226,21 @@ static int timerfd_release(struct inode *inode, struct file *file) kfree_rcu(ctx, rcu); return 0; } - -static struct wait_queue_head *timerfd_get_poll_head(struct file *file, - __poll_t eventmask) + +static __poll_t timerfd_poll(struct file *file, poll_table *wait) { struct timerfd_ctx *ctx = file->private_data; + __poll_t events = 0; + unsigned long flags; - return &ctx->wqh; -} + poll_wait(file, &ctx->wqh, wait); -static __poll_t timerfd_poll_mask(struct file *file, __poll_t eventmask) -{ - struct timerfd_ctx *ctx = file->private_data; + spin_lock_irqsave(&ctx->wqh.lock, flags); + if (ctx->ticks) + events |= EPOLLIN; + spin_unlock_irqrestore(&ctx->wqh.lock, flags); - return ctx->ticks ? EPOLLIN : 0; + return events; } static ssize_t timerfd_read(struct file *file, char __user *buf, size_t count, @@ -363,8 +364,7 @@ static long timerfd_ioctl(struct file *file, unsigned int cmd, unsigned long arg static const struct file_operations timerfd_fops = { .release = timerfd_release, - .get_poll_head = timerfd_get_poll_head, - .poll_mask = timerfd_poll_mask, + .poll = timerfd_poll, .read = timerfd_read, .llseek = noop_llseek, .show_fdinfo = timerfd_show, diff --git a/include/crypto/if_alg.h b/include/crypto/if_alg.h index cc414db9da0a..482461d8931d 100644 --- a/include/crypto/if_alg.h +++ b/include/crypto/if_alg.h @@ -245,7 +245,8 @@ ssize_t af_alg_sendpage(struct socket *sock, struct page *page, int offset, size_t size, int flags); void af_alg_free_resources(struct af_alg_async_req *areq); void af_alg_async_cb(struct crypto_async_request *_req, int err); -__poll_t af_alg_poll_mask(struct socket *sock, __poll_t events); +__poll_t af_alg_poll(struct file *file, struct socket *sock, + poll_table *wait); struct af_alg_async_req *af_alg_alloc_areq(struct sock *sk, unsigned int areqlen); int af_alg_get_rsgl(struct sock *sk, struct msghdr *msg, int flags, diff --git a/include/linux/fs.h b/include/linux/fs.h index 5c91108846db..d78d146a98da 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1720,8 +1720,6 @@ struct file_operations { int (*iterate) (struct file *, struct dir_context *); int (*iterate_shared) (struct file *, struct dir_context *); __poll_t (*poll) (struct file *, struct poll_table_struct *); - struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t); - __poll_t (*poll_mask) (struct file *, __poll_t); long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); long (*compat_ioctl) (struct file *, unsigned int, unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); diff --git a/include/linux/net.h b/include/linux/net.h index 08b6eb964dd6..6554d3ba4396 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -147,7 +147,6 @@ struct proto_ops { int (*getname) (struct socket *sock, struct sockaddr *addr, int peer); - __poll_t (*poll_mask) (struct socket *sock, __poll_t events); __poll_t (*poll) (struct file *file, struct socket *sock, struct poll_table_struct *wait); int (*ioctl) (struct socket *sock, unsigned int cmd, diff --git a/include/linux/poll.h b/include/linux/poll.h index fdf86b4cbc71..7e0fdcf905d2 100644 --- a/include/linux/poll.h +++ b/include/linux/poll.h @@ -74,18 +74,18 @@ static inline void init_poll_funcptr(poll_table *pt, poll_queue_proc qproc) pt->_key = ~(__poll_t)0; /* all events enabled */ } -static inline bool file_has_poll_mask(struct file *file) +static inline bool file_can_poll(struct file *file) { - return file->f_op->get_poll_head && file->f_op->poll_mask; + return file->f_op->poll; } -static inline bool file_can_poll(struct file *file) +static inline __poll_t vfs_poll(struct file *file, struct poll_table_struct *pt) { - return file->f_op->poll || file_has_poll_mask(file); + if (unlikely(!file->f_op->poll)) + return DEFAULT_POLLMASK; + return file->f_op->poll(file, pt); } -__poll_t vfs_poll(struct file *file, struct poll_table_struct *pt); - struct poll_table_entry { struct file *filp; __poll_t key; diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index c86885954994..164cdedf6012 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -3252,7 +3252,8 @@ struct sk_buff *__skb_recv_datagram(struct sock *sk, unsigned flags, int *peeked, int *off, int *err); struct sk_buff *skb_recv_datagram(struct sock *sk, unsigned flags, int noblock, int *err); -__poll_t datagram_poll_mask(struct socket *sock, __poll_t events); +__poll_t datagram_poll(struct file *file, struct socket *sock, + struct poll_table_struct *wait); int skb_copy_datagram_iter(const struct sk_buff *from, int offset, struct iov_iter *to, int size); static inline int skb_copy_datagram_msg(const struct sk_buff *from, int offset, diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index 53ce8176c313..ec9d6bc65855 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -271,7 +271,7 @@ int bt_sock_recvmsg(struct socket *sock, struct msghdr *msg, size_t len, int flags); int bt_sock_stream_recvmsg(struct socket *sock, struct msghdr *msg, size_t len, int flags); -__poll_t bt_sock_poll_mask(struct socket *sock, __poll_t events); +__poll_t bt_sock_poll(struct file *file, struct socket *sock, poll_table *wait); int bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); int bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo); int bt_sock_wait_ready(struct sock *sk, unsigned long flags); diff --git a/include/net/iucv/af_iucv.h b/include/net/iucv/af_iucv.h index b0eaeb02d46d..f4c21b5a1242 100644 --- a/include/net/iucv/af_iucv.h +++ b/include/net/iucv/af_iucv.h @@ -153,6 +153,8 @@ struct iucv_sock_list { atomic_t autobind_name; }; +__poll_t iucv_sock_poll(struct file *file, struct socket *sock, + poll_table *wait); void iucv_sock_link(struct iucv_sock_list *l, struct sock *s); void iucv_sock_unlink(struct iucv_sock_list *l, struct sock *s); void iucv_accept_enqueue(struct sock *parent, struct sock *sk); diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h index 30b3e2fe240a..8c2caa370e0f 100644 --- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -109,7 +109,8 @@ int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb); int sctp_inet_listen(struct socket *sock, int backlog); void sctp_write_space(struct sock *sk); void sctp_data_ready(struct sock *sk); -__poll_t sctp_poll_mask(struct socket *sock, __poll_t events); +__poll_t sctp_poll(struct file *file, struct socket *sock, + poll_table *wait); void sctp_sock_rfree(struct sk_buff *skb); void sctp_copy_sock(struct sock *newsk, struct sock *sk, struct sctp_association *asoc); diff --git a/include/net/tcp.h b/include/net/tcp.h index 0448e7c5d2b4..800582b5dd54 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -388,7 +388,8 @@ bool tcp_peer_is_proven(struct request_sock *req, struct dst_entry *dst); void tcp_close(struct sock *sk, long timeout); void tcp_init_sock(struct sock *sk); void tcp_init_transfer(struct sock *sk, int bpf_op); -__poll_t tcp_poll_mask(struct socket *sock, __poll_t events); +__poll_t tcp_poll(struct file *file, struct socket *sock, + struct poll_table_struct *wait); int tcp_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen); int tcp_setsockopt(struct sock *sk, int level, int optname, diff --git a/include/net/tls.h b/include/net/tls.h index 7f84ea3e217c..70c273777fe9 100644 --- a/include/net/tls.h +++ b/include/net/tls.h @@ -109,7 +109,8 @@ struct tls_sw_context_rx { struct strparser strp; void (*saved_data_ready)(struct sock *sk); - __poll_t (*sk_poll_mask)(struct socket *sock, __poll_t events); + unsigned int (*sk_poll)(struct file *file, struct socket *sock, + struct poll_table_struct *wait); struct sk_buff *recv_pkt; u8 control; bool decrypted; @@ -224,7 +225,8 @@ void tls_sw_free_resources_tx(struct sock *sk); void tls_sw_free_resources_rx(struct sock *sk); int tls_sw_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, int nonblock, int flags, int *addr_len); -__poll_t tls_sw_poll_mask(struct socket *sock, __poll_t events); +unsigned int tls_sw_poll(struct file *file, struct socket *sock, + struct poll_table_struct *wait); ssize_t tls_sw_splice_read(struct socket *sock, loff_t *ppos, struct pipe_inode_info *pipe, size_t len, unsigned int flags); diff --git a/include/net/udp.h b/include/net/udp.h index b1ea8b0f5e6a..81afdacd4fff 100644 --- a/include/net/udp.h +++ b/include/net/udp.h @@ -285,7 +285,7 @@ int udp_init_sock(struct sock *sk); int udp_pre_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len); int __udp_disconnect(struct sock *sk, int flags); int udp_disconnect(struct sock *sk, int flags); -__poll_t udp_poll_mask(struct socket *sock, __poll_t events); +__poll_t udp_poll(struct file *file, struct socket *sock, poll_table *wait); struct sk_buff *skb_udp_tunnel_segment(struct sk_buff *skb, netdev_features_t features, bool is_ipv6); diff --git a/include/uapi/linux/aio_abi.h b/include/uapi/linux/aio_abi.h index d00221345c19..d4e768d55d14 100644 --- a/include/uapi/linux/aio_abi.h +++ b/include/uapi/linux/aio_abi.h @@ -39,8 +39,10 @@ enum { IOCB_CMD_PWRITE = 1, IOCB_CMD_FSYNC = 2, IOCB_CMD_FDSYNC = 3, - /* 4 was the experimental IOCB_CMD_PREADX */ - IOCB_CMD_POLL = 5, + /* These two are experimental. + * IOCB_CMD_PREADX = 4, + * IOCB_CMD_POLL = 5, + */ IOCB_CMD_NOOP = 6, IOCB_CMD_PREADV = 7, IOCB_CMD_PWRITEV = 8, @@ -109,7 +111,7 @@ struct iocb { #undef IFLITTLE struct __aio_sigset { - const sigset_t __user *sigmask; + sigset_t __user *sigmask; size_t sigsetsize; }; diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c index 55fdba05d7d9..9b6bc5abe946 100644 --- a/net/appletalk/ddp.c +++ b/net/appletalk/ddp.c @@ -1869,7 +1869,7 @@ static const struct proto_ops atalk_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = atalk_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = atalk_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = atalk_compat_ioctl, diff --git a/net/atm/common.c b/net/atm/common.c index ff5748b2190f..a7a68e509628 100644 --- a/net/atm/common.c +++ b/net/atm/common.c @@ -647,11 +647,16 @@ out: return error; } -__poll_t vcc_poll_mask(struct socket *sock, __poll_t events) +__poll_t vcc_poll(struct file *file, struct socket *sock, poll_table *wait) { struct sock *sk = sock->sk; - struct atm_vcc *vcc = ATM_SD(sock); - __poll_t mask = 0; + struct atm_vcc *vcc; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; + + vcc = ATM_SD(sock); /* exceptional events */ if (sk->sk_err) diff --git a/net/atm/common.h b/net/atm/common.h index 526796ad230f..5850649068bb 100644 --- a/net/atm/common.h +++ b/net/atm/common.h @@ -17,7 +17,7 @@ int vcc_connect(struct socket *sock, int itf, short vpi, int vci); int vcc_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, int flags); int vcc_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len); -__poll_t vcc_poll_mask(struct socket *sock, __poll_t events); +__poll_t vcc_poll(struct file *file, struct socket *sock, poll_table *wait); int vcc_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); int vcc_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); int vcc_setsockopt(struct socket *sock, int level, int optname, diff --git a/net/atm/pvc.c b/net/atm/pvc.c index 9f75092fe778..2cb10af16afc 100644 --- a/net/atm/pvc.c +++ b/net/atm/pvc.c @@ -113,7 +113,7 @@ static const struct proto_ops pvc_proto_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = pvc_getname, - .poll_mask = vcc_poll_mask, + .poll = vcc_poll, .ioctl = vcc_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = vcc_compat_ioctl, diff --git a/net/atm/svc.c b/net/atm/svc.c index 53f4ad7087b1..2f91b766ac42 100644 --- a/net/atm/svc.c +++ b/net/atm/svc.c @@ -636,7 +636,7 @@ static const struct proto_ops svc_proto_ops = { .socketpair = sock_no_socketpair, .accept = svc_accept, .getname = svc_getname, - .poll_mask = vcc_poll_mask, + .poll = vcc_poll, .ioctl = svc_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = svc_compat_ioctl, diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c index d1d2442ce573..c603d33d5410 100644 --- a/net/ax25/af_ax25.c +++ b/net/ax25/af_ax25.c @@ -1941,7 +1941,7 @@ static const struct proto_ops ax25_proto_ops = { .socketpair = sock_no_socketpair, .accept = ax25_accept, .getname = ax25_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = ax25_ioctl, .listen = ax25_listen, .shutdown = ax25_shutdown, diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c index 510ab4f55df5..3264e1873219 100644 --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -437,13 +437,16 @@ static inline __poll_t bt_accept_poll(struct sock *parent) return 0; } -__poll_t bt_sock_poll_mask(struct socket *sock, __poll_t events) +__poll_t bt_sock_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; __poll_t mask = 0; BT_DBG("sock %p, sk %p", sock, sk); + poll_wait(file, sk_sleep(sk), wait); + if (sk->sk_state == BT_LISTEN) return bt_accept_poll(sk); @@ -475,7 +478,7 @@ __poll_t bt_sock_poll_mask(struct socket *sock, __poll_t events) return mask; } -EXPORT_SYMBOL(bt_sock_poll_mask); +EXPORT_SYMBOL(bt_sock_poll); int bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) { diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index d6c099861538..1506e1632394 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -1975,7 +1975,7 @@ static const struct proto_ops hci_sock_ops = { .sendmsg = hci_sock_sendmsg, .recvmsg = hci_sock_recvmsg, .ioctl = hci_sock_ioctl, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .listen = sock_no_listen, .shutdown = sock_no_shutdown, .setsockopt = hci_sock_setsockopt, diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index 742a190034e6..686bdc6b35b0 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -1653,7 +1653,7 @@ static const struct proto_ops l2cap_sock_ops = { .getname = l2cap_sock_getname, .sendmsg = l2cap_sock_sendmsg, .recvmsg = l2cap_sock_recvmsg, - .poll_mask = bt_sock_poll_mask, + .poll = bt_sock_poll, .ioctl = bt_sock_ioctl, .mmap = sock_no_mmap, .socketpair = sock_no_socketpair, diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index 1cf57622473a..d606e9212291 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -1049,7 +1049,7 @@ static const struct proto_ops rfcomm_sock_ops = { .setsockopt = rfcomm_sock_setsockopt, .getsockopt = rfcomm_sock_getsockopt, .ioctl = rfcomm_sock_ioctl, - .poll_mask = bt_sock_poll_mask, + .poll = bt_sock_poll, .socketpair = sock_no_socketpair, .mmap = sock_no_mmap }; diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index d60dbc61d170..413b8ee49fec 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -1197,7 +1197,7 @@ static const struct proto_ops sco_sock_ops = { .getname = sco_sock_getname, .sendmsg = sco_sock_sendmsg, .recvmsg = sco_sock_recvmsg, - .poll_mask = bt_sock_poll_mask, + .poll = bt_sock_poll, .ioctl = bt_sock_ioctl, .mmap = sock_no_mmap, .socketpair = sock_no_socketpair, diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c index c7991867d622..a6fb1b3bcad9 100644 --- a/net/caif/caif_socket.c +++ b/net/caif/caif_socket.c @@ -934,11 +934,15 @@ static int caif_release(struct socket *sock) } /* Copied from af_unix.c:unix_poll(), added CAIF tx_flow handling */ -static __poll_t caif_poll_mask(struct socket *sock, __poll_t events) +static __poll_t caif_poll(struct file *file, + struct socket *sock, poll_table *wait) { struct sock *sk = sock->sk; + __poll_t mask; struct caifsock *cf_sk = container_of(sk, struct caifsock, sk); - __poll_t mask = 0; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; /* exceptional events? */ if (sk->sk_err) @@ -972,7 +976,7 @@ static const struct proto_ops caif_seqpacket_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = caif_poll_mask, + .poll = caif_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -993,7 +997,7 @@ static const struct proto_ops caif_stream_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = caif_poll_mask, + .poll = caif_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/can/bcm.c b/net/can/bcm.c index 9393f25df08d..0af8f0db892a 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -1660,7 +1660,7 @@ static const struct proto_ops bcm_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = can_ioctl, /* use can_ioctl() from af_can.c */ .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/can/raw.c b/net/can/raw.c index fd7e2f49ea6a..1051eee82581 100644 --- a/net/can/raw.c +++ b/net/can/raw.c @@ -843,7 +843,7 @@ static const struct proto_ops raw_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = raw_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = can_ioctl, /* use can_ioctl() from af_can.c */ .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/core/datagram.c b/net/core/datagram.c index f19bf3dc2bd6..9938952c5c78 100644 --- a/net/core/datagram.c +++ b/net/core/datagram.c @@ -819,8 +819,9 @@ EXPORT_SYMBOL(skb_copy_and_csum_datagram_msg); /** * datagram_poll - generic datagram poll + * @file: file struct * @sock: socket - * @events to wait for + * @wait: poll table * * Datagram poll: Again totally generic. This also handles * sequenced packet sockets providing the socket receive queue @@ -830,10 +831,14 @@ EXPORT_SYMBOL(skb_copy_and_csum_datagram_msg); * and you use a different write policy from sock_writeable() * then please supply your own write_space callback. */ -__poll_t datagram_poll_mask(struct socket *sock, __poll_t events) +__poll_t datagram_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; - __poll_t mask = 0; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; /* exceptional events? */ if (sk->sk_err || !skb_queue_empty(&sk->sk_error_queue)) @@ -866,4 +871,4 @@ __poll_t datagram_poll_mask(struct socket *sock, __poll_t events) return mask; } -EXPORT_SYMBOL(datagram_poll_mask); +EXPORT_SYMBOL(datagram_poll); diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index 0ea2ee56ac1b..f91e3816806b 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -316,7 +316,8 @@ int dccp_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, int nonblock, int flags, int *addr_len); void dccp_shutdown(struct sock *sk, int how); int inet_dccp_listen(struct socket *sock, int backlog); -__poll_t dccp_poll_mask(struct socket *sock, __poll_t events); +__poll_t dccp_poll(struct file *file, struct socket *sock, + poll_table *wait); int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len); void dccp_req_err(struct sock *sk, u64 seq); diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index a9e478cd3787..b08feb219b44 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -984,7 +984,7 @@ static const struct proto_ops inet_dccp_ops = { .accept = inet_accept, .getname = inet_getname, /* FIXME: work on tcp_poll to rename it to inet_csk_poll */ - .poll_mask = dccp_poll_mask, + .poll = dccp_poll, .ioctl = inet_ioctl, /* FIXME: work on inet_listen to rename it to sock_common_listen */ .listen = inet_dccp_listen, diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index 17fc4e0166ba..6344f1b18a6a 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -1070,7 +1070,7 @@ static const struct proto_ops inet6_dccp_ops = { .socketpair = sock_no_socketpair, .accept = inet_accept, .getname = inet6_getname, - .poll_mask = dccp_poll_mask, + .poll = dccp_poll, .ioctl = inet6_ioctl, .listen = inet_dccp_listen, .shutdown = inet_shutdown, diff --git a/net/dccp/proto.c b/net/dccp/proto.c index ca21c1c76da0..0d56e36a6db7 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -312,11 +312,20 @@ int dccp_disconnect(struct sock *sk, int flags) EXPORT_SYMBOL_GPL(dccp_disconnect); -__poll_t dccp_poll_mask(struct socket *sock, __poll_t events) +/* + * Wait for a DCCP event. + * + * Note that we don't need to lock the socket, as the upper poll layers + * take care of normal races (between the test and the event) and we don't + * go look at any of the socket buffers directly. + */ +__poll_t dccp_poll(struct file *file, struct socket *sock, + poll_table *wait) { __poll_t mask; struct sock *sk = sock->sk; + sock_poll_wait(file, sk_sleep(sk), wait); if (sk->sk_state == DCCP_LISTEN) return inet_csk_listen_poll(sk); @@ -358,7 +367,7 @@ __poll_t dccp_poll_mask(struct socket *sock, __poll_t events) return mask; } -EXPORT_SYMBOL_GPL(dccp_poll_mask); +EXPORT_SYMBOL_GPL(dccp_poll); int dccp_ioctl(struct sock *sk, int cmd, unsigned long arg) { diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c index 9a686d890bfa..7d6ff983ba2c 100644 --- a/net/decnet/af_decnet.c +++ b/net/decnet/af_decnet.c @@ -1207,11 +1207,11 @@ static int dn_getname(struct socket *sock, struct sockaddr *uaddr,int peer) } -static __poll_t dn_poll_mask(struct socket *sock, __poll_t events) +static __poll_t dn_poll(struct file *file, struct socket *sock, poll_table *wait) { struct sock *sk = sock->sk; struct dn_scp *scp = DN_SK(sk); - __poll_t mask = datagram_poll_mask(sock, events); + __poll_t mask = datagram_poll(file, sock, wait); if (!skb_queue_empty(&scp->other_receive_queue)) mask |= EPOLLRDBAND; @@ -2331,7 +2331,7 @@ static const struct proto_ops dn_proto_ops = { .socketpair = sock_no_socketpair, .accept = dn_accept, .getname = dn_getname, - .poll_mask = dn_poll_mask, + .poll = dn_poll, .ioctl = dn_ioctl, .listen = dn_listen, .shutdown = dn_shutdown, diff --git a/net/ieee802154/socket.c b/net/ieee802154/socket.c index a0768d2759b8..a60658c85a9a 100644 --- a/net/ieee802154/socket.c +++ b/net/ieee802154/socket.c @@ -423,7 +423,7 @@ static const struct proto_ops ieee802154_raw_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = ieee802154_sock_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -969,7 +969,7 @@ static const struct proto_ops ieee802154_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = ieee802154_sock_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 15e125558c76..b403499fdabe 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -986,7 +986,7 @@ const struct proto_ops inet_stream_ops = { .socketpair = sock_no_socketpair, .accept = inet_accept, .getname = inet_getname, - .poll_mask = tcp_poll_mask, + .poll = tcp_poll, .ioctl = inet_ioctl, .listen = inet_listen, .shutdown = inet_shutdown, @@ -1021,7 +1021,7 @@ const struct proto_ops inet_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = inet_getname, - .poll_mask = udp_poll_mask, + .poll = udp_poll, .ioctl = inet_ioctl, .listen = sock_no_listen, .shutdown = inet_shutdown, @@ -1042,7 +1042,7 @@ EXPORT_SYMBOL(inet_dgram_ops); /* * For SOCK_RAW sockets; should be the same as inet_dgram_ops but without - * udp_poll_mask + * udp_poll */ static const struct proto_ops inet_sockraw_ops = { .family = PF_INET, @@ -1053,7 +1053,7 @@ static const struct proto_ops inet_sockraw_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = inet_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = inet_ioctl, .listen = sock_no_listen, .shutdown = inet_shutdown, diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 141acd92e58a..e7b53d2a971f 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -494,21 +494,32 @@ static inline bool tcp_stream_is_readable(const struct tcp_sock *tp, } /* - * Socket is not locked. We are protected from async events by poll logic and - * correct handling of state changes made by other threads is impossible in - * any case. + * Wait for a TCP event. + * + * Note that we don't need to lock the socket, as the upper poll layers + * take care of normal races (between the test and the event) and we don't + * go look at any of the socket buffers directly. */ -__poll_t tcp_poll_mask(struct socket *sock, __poll_t events) +__poll_t tcp_poll(struct file *file, struct socket *sock, poll_table *wait) { + __poll_t mask; struct sock *sk = sock->sk; const struct tcp_sock *tp = tcp_sk(sk); - __poll_t mask = 0; int state; + sock_poll_wait(file, sk_sleep(sk), wait); + state = inet_sk_state_load(sk); if (state == TCP_LISTEN) return inet_csk_listen_poll(sk); + /* Socket is not locked. We are protected from async events + * by poll logic and correct handling of state changes + * made by other threads is impossible in any case. + */ + + mask = 0; + /* * EPOLLHUP is certainly not done right. But poll() doesn't * have a notion of HUP in just one direction, and for a @@ -589,7 +600,7 @@ __poll_t tcp_poll_mask(struct socket *sock, __poll_t events) return mask; } -EXPORT_SYMBOL(tcp_poll_mask); +EXPORT_SYMBOL(tcp_poll); int tcp_ioctl(struct sock *sk, int cmd, unsigned long arg) { diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 9bb27df4dac5..24e116ddae79 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -2591,7 +2591,7 @@ int compat_udp_getsockopt(struct sock *sk, int level, int optname, * udp_poll - wait for a UDP event. * @file - file struct * @sock - socket - * @events - events to wait for + * @wait - poll table * * This is same as datagram poll, except for the special case of * blocking sockets. If application is using a blocking fd @@ -2600,23 +2600,23 @@ int compat_udp_getsockopt(struct sock *sk, int level, int optname, * but then block when reading it. Add special case code * to work around these arguably broken applications. */ -__poll_t udp_poll_mask(struct socket *sock, __poll_t events) +__poll_t udp_poll(struct file *file, struct socket *sock, poll_table *wait) { - __poll_t mask = datagram_poll_mask(sock, events); + __poll_t mask = datagram_poll(file, sock, wait); struct sock *sk = sock->sk; if (!skb_queue_empty(&udp_sk(sk)->reader_queue)) mask |= EPOLLIN | EPOLLRDNORM; /* Check for false positives due to checksum errors */ - if ((mask & EPOLLRDNORM) && !(sock->file->f_flags & O_NONBLOCK) && + if ((mask & EPOLLRDNORM) && !(file->f_flags & O_NONBLOCK) && !(sk->sk_shutdown & RCV_SHUTDOWN) && first_packet_length(sk) == -1) mask &= ~(EPOLLIN | EPOLLRDNORM); return mask; } -EXPORT_SYMBOL(udp_poll_mask); +EXPORT_SYMBOL(udp_poll); int udp_abort(struct sock *sk, int err) { diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c index 74f2a261e8df..9ed0eae91758 100644 --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -570,7 +570,7 @@ const struct proto_ops inet6_stream_ops = { .socketpair = sock_no_socketpair, /* a do nothing */ .accept = inet_accept, /* ok */ .getname = inet6_getname, - .poll_mask = tcp_poll_mask, /* ok */ + .poll = tcp_poll, /* ok */ .ioctl = inet6_ioctl, /* must change */ .listen = inet_listen, /* ok */ .shutdown = inet_shutdown, /* ok */ @@ -603,7 +603,7 @@ const struct proto_ops inet6_dgram_ops = { .socketpair = sock_no_socketpair, /* a do nothing */ .accept = sock_no_accept, /* a do nothing */ .getname = inet6_getname, - .poll_mask = udp_poll_mask, /* ok */ + .poll = udp_poll, /* ok */ .ioctl = inet6_ioctl, /* must change */ .listen = sock_no_listen, /* ok */ .shutdown = inet_shutdown, /* ok */ diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index ce6f0d15b5dd..afc307c89d1a 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -1334,7 +1334,7 @@ void raw6_proc_exit(void) } #endif /* CONFIG_PROC_FS */ -/* Same as inet6_dgram_ops, sans udp_poll_mask. */ +/* Same as inet6_dgram_ops, sans udp_poll. */ const struct proto_ops inet6_sockraw_ops = { .family = PF_INET6, .owner = THIS_MODULE, @@ -1344,7 +1344,7 @@ const struct proto_ops inet6_sockraw_ops = { .socketpair = sock_no_socketpair, /* a do nothing */ .accept = sock_no_accept, /* a do nothing */ .getname = inet6_getname, - .poll_mask = datagram_poll_mask, /* ok */ + .poll = datagram_poll, /* ok */ .ioctl = inet6_ioctl, /* must change */ .listen = sock_no_listen, /* ok */ .shutdown = inet_shutdown, /* ok */ diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 68e86257a549..893a022f9620 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -1488,11 +1488,14 @@ static inline __poll_t iucv_accept_poll(struct sock *parent) return 0; } -static __poll_t iucv_sock_poll_mask(struct socket *sock, __poll_t events) +__poll_t iucv_sock_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; __poll_t mask = 0; + sock_poll_wait(file, sk_sleep(sk), wait); + if (sk->sk_state == IUCV_LISTEN) return iucv_accept_poll(sk); @@ -2385,7 +2388,7 @@ static const struct proto_ops iucv_sock_ops = { .getname = iucv_sock_getname, .sendmsg = iucv_sock_sendmsg, .recvmsg = iucv_sock_recvmsg, - .poll_mask = iucv_sock_poll_mask, + .poll = iucv_sock_poll, .ioctl = sock_no_ioctl, .mmap = sock_no_mmap, .socketpair = sock_no_socketpair, diff --git a/net/kcm/kcmsock.c b/net/kcm/kcmsock.c index 84b7d5c6fec8..d3601d421571 100644 --- a/net/kcm/kcmsock.c +++ b/net/kcm/kcmsock.c @@ -1336,9 +1336,9 @@ static void init_kcm_sock(struct kcm_sock *kcm, struct kcm_mux *mux) struct list_head *head; int index = 0; - /* For SOCK_SEQPACKET sock type, datagram_poll_mask checks the sk_state, - * so we set sk_state, otherwise epoll_wait always returns right away - * with EPOLLHUP + /* For SOCK_SEQPACKET sock type, datagram_poll checks the sk_state, so + * we set sk_state, otherwise epoll_wait always returns right away with + * EPOLLHUP */ kcm->sk.sk_state = TCP_ESTABLISHED; @@ -1903,7 +1903,7 @@ static const struct proto_ops kcm_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = kcm_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -1924,7 +1924,7 @@ static const struct proto_ops kcm_seqpacket_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = kcm_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/key/af_key.c b/net/key/af_key.c index 8bdc1cbe490a..5e1d2946ffbf 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -3751,7 +3751,7 @@ static const struct proto_ops pfkey_ops = { /* Now the operations that really occur. */ .release = pfkey_release, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .sendmsg = pfkey_sendmsg, .recvmsg = pfkey_recvmsg, }; diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c index 181073bf6925..a9c05b2bc1b0 100644 --- a/net/l2tp/l2tp_ip.c +++ b/net/l2tp/l2tp_ip.c @@ -613,7 +613,7 @@ static const struct proto_ops l2tp_ip_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = l2tp_ip_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = inet_ioctl, .listen = sock_no_listen, .shutdown = inet_shutdown, diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c index 336e4c00abbc..957369192ca1 100644 --- a/net/l2tp/l2tp_ip6.c +++ b/net/l2tp/l2tp_ip6.c @@ -754,7 +754,7 @@ static const struct proto_ops l2tp_ip6_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = l2tp_ip6_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = inet6_ioctl, .listen = sock_no_listen, .shutdown = inet_shutdown, diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c index 55188382845c..e398797878a9 100644 --- a/net/l2tp/l2tp_ppp.c +++ b/net/l2tp/l2tp_ppp.c @@ -1818,7 +1818,7 @@ static const struct proto_ops pppol2tp_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = pppol2tp_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .listen = sock_no_listen, .shutdown = sock_no_shutdown, .setsockopt = pppol2tp_setsockopt, diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c index 804de8490186..1beeea9549fa 100644 --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -1192,7 +1192,7 @@ static const struct proto_ops llc_ui_ops = { .socketpair = sock_no_socketpair, .accept = llc_ui_accept, .getname = llc_ui_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = llc_ui_ioctl, .listen = llc_ui_listen, .shutdown = llc_ui_shutdown, diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 1189b84413d5..393573a99a5a 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -2658,7 +2658,7 @@ static const struct proto_ops netlink_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = netlink_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = netlink_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index 93fbcafbf388..03f37c4e64fe 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -1355,7 +1355,7 @@ static const struct proto_ops nr_proto_ops = { .socketpair = sock_no_socketpair, .accept = nr_accept, .getname = nr_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = nr_ioctl, .listen = nr_listen, .shutdown = sock_no_shutdown, diff --git a/net/nfc/llcp_sock.c b/net/nfc/llcp_sock.c index ab5bb14b49af..ea0c0c6f1874 100644 --- a/net/nfc/llcp_sock.c +++ b/net/nfc/llcp_sock.c @@ -548,13 +548,16 @@ static inline __poll_t llcp_accept_poll(struct sock *parent) return 0; } -static __poll_t llcp_sock_poll_mask(struct socket *sock, __poll_t events) +static __poll_t llcp_sock_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; __poll_t mask = 0; pr_debug("%p\n", sk); + sock_poll_wait(file, sk_sleep(sk), wait); + if (sk->sk_state == LLCP_LISTEN) return llcp_accept_poll(sk); @@ -896,7 +899,7 @@ static const struct proto_ops llcp_sock_ops = { .socketpair = sock_no_socketpair, .accept = llcp_sock_accept, .getname = llcp_sock_getname, - .poll_mask = llcp_sock_poll_mask, + .poll = llcp_sock_poll, .ioctl = sock_no_ioctl, .listen = llcp_sock_listen, .shutdown = sock_no_shutdown, @@ -916,7 +919,7 @@ static const struct proto_ops llcp_rawsock_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = llcp_sock_getname, - .poll_mask = llcp_sock_poll_mask, + .poll = llcp_sock_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/nfc/rawsock.c b/net/nfc/rawsock.c index 60c322531c49..e2188deb08dc 100644 --- a/net/nfc/rawsock.c +++ b/net/nfc/rawsock.c @@ -284,7 +284,7 @@ static const struct proto_ops rawsock_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -304,7 +304,7 @@ static const struct proto_ops rawsock_raw_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index ff8e7e245c37..57634bc3da74 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -4076,11 +4076,12 @@ static int packet_ioctl(struct socket *sock, unsigned int cmd, return 0; } -static __poll_t packet_poll_mask(struct socket *sock, __poll_t events) +static __poll_t packet_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; struct packet_sock *po = pkt_sk(sk); - __poll_t mask = datagram_poll_mask(sock, events); + __poll_t mask = datagram_poll(file, sock, wait); spin_lock_bh(&sk->sk_receive_queue.lock); if (po->rx_ring.pg_vec) { @@ -4422,7 +4423,7 @@ static const struct proto_ops packet_ops_spkt = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = packet_getname_spkt, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = packet_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -4443,7 +4444,7 @@ static const struct proto_ops packet_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = packet_getname, - .poll_mask = packet_poll_mask, + .poll = packet_poll, .ioctl = packet_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/phonet/socket.c b/net/phonet/socket.c index c295c4e20f01..30187990257f 100644 --- a/net/phonet/socket.c +++ b/net/phonet/socket.c @@ -340,12 +340,15 @@ static int pn_socket_getname(struct socket *sock, struct sockaddr *addr, return sizeof(struct sockaddr_pn); } -static __poll_t pn_socket_poll_mask(struct socket *sock, __poll_t events) +static __poll_t pn_socket_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; struct pep_sock *pn = pep_sk(sk); __poll_t mask = 0; + poll_wait(file, sk_sleep(sk), wait); + if (sk->sk_state == TCP_CLOSE) return EPOLLERR; if (!skb_queue_empty(&sk->sk_receive_queue)) @@ -445,7 +448,7 @@ const struct proto_ops phonet_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = pn_socket_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = pn_socket_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -470,7 +473,7 @@ const struct proto_ops phonet_stream_ops = { .socketpair = sock_no_socketpair, .accept = pn_socket_accept, .getname = pn_socket_getname, - .poll_mask = pn_socket_poll_mask, + .poll = pn_socket_poll, .ioctl = pn_socket_ioctl, .listen = pn_socket_listen, .shutdown = sock_no_shutdown, diff --git a/net/qrtr/qrtr.c b/net/qrtr/qrtr.c index 1b5025ea5b04..2aa07b547b16 100644 --- a/net/qrtr/qrtr.c +++ b/net/qrtr/qrtr.c @@ -1023,7 +1023,7 @@ static const struct proto_ops qrtr_proto_ops = { .recvmsg = qrtr_recvmsg, .getname = qrtr_getname, .ioctl = qrtr_ioctl, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .shutdown = sock_no_shutdown, .setsockopt = sock_no_setsockopt, .getsockopt = sock_no_getsockopt, diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c index ebe42e7eb456..d00a0ef39a56 100644 --- a/net/rose/af_rose.c +++ b/net/rose/af_rose.c @@ -1470,7 +1470,7 @@ static const struct proto_ops rose_proto_ops = { .socketpair = sock_no_socketpair, .accept = rose_accept, .getname = rose_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = rose_ioctl, .listen = rose_listen, .shutdown = sock_no_shutdown, diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c index 3b1ac93efee2..2b463047dd7b 100644 --- a/net/rxrpc/af_rxrpc.c +++ b/net/rxrpc/af_rxrpc.c @@ -734,11 +734,15 @@ static int rxrpc_getsockopt(struct socket *sock, int level, int optname, /* * permit an RxRPC socket to be polled */ -static __poll_t rxrpc_poll_mask(struct socket *sock, __poll_t events) +static __poll_t rxrpc_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; struct rxrpc_sock *rx = rxrpc_sk(sk); - __poll_t mask = 0; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; /* the socket is readable if there are any messages waiting on the Rx * queue */ @@ -945,7 +949,7 @@ static const struct proto_ops rxrpc_rpc_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = rxrpc_poll_mask, + .poll = rxrpc_poll, .ioctl = sock_no_ioctl, .listen = rxrpc_listen, .shutdown = rxrpc_shutdown, diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c index 7339918a805d..0cd2e764f47f 100644 --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -1010,7 +1010,7 @@ static const struct proto_ops inet6_seqpacket_ops = { .socketpair = sock_no_socketpair, .accept = inet_accept, .getname = sctp_getname, - .poll_mask = sctp_poll_mask, + .poll = sctp_poll, .ioctl = inet6_ioctl, .listen = sctp_inet_listen, .shutdown = inet_shutdown, diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 5dffbc493008..67f73d3a1356 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -1016,7 +1016,7 @@ static const struct proto_ops inet_seqpacket_ops = { .socketpair = sock_no_socketpair, .accept = inet_accept, .getname = inet_getname, /* Semantics are different. */ - .poll_mask = sctp_poll_mask, + .poll = sctp_poll, .ioctl = inet_ioctl, .listen = sctp_inet_listen, .shutdown = inet_shutdown, /* Looks harmless. */ diff --git a/net/sctp/socket.c b/net/sctp/socket.c index d20f7addee19..ce620e878538 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -7717,12 +7717,14 @@ out: * here, again, by modeling the current TCP/UDP code. We don't have * a good way to test with it yet. */ -__poll_t sctp_poll_mask(struct socket *sock, __poll_t events) +__poll_t sctp_poll(struct file *file, struct socket *sock, poll_table *wait) { struct sock *sk = sock->sk; struct sctp_sock *sp = sctp_sk(sk); __poll_t mask; + poll_wait(file, sk_sleep(sk), wait); + sock_rps_record_flow(sk); /* A TCP-style listening socket becomes readable when the accept queue diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index da7f02edcd37..973b4471b532 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -1273,7 +1273,8 @@ static __poll_t smc_accept_poll(struct sock *parent) return mask; } -static __poll_t smc_poll_mask(struct socket *sock, __poll_t events) +static __poll_t smc_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; __poll_t mask = 0; @@ -1289,7 +1290,7 @@ static __poll_t smc_poll_mask(struct socket *sock, __poll_t events) if ((sk->sk_state == SMC_INIT) || smc->use_fallback) { /* delegate to CLC child sock */ release_sock(sk); - mask = smc->clcsock->ops->poll_mask(smc->clcsock, events); + mask = smc->clcsock->ops->poll(file, smc->clcsock, wait); lock_sock(sk); sk->sk_err = smc->clcsock->sk->sk_err; if (sk->sk_err) { @@ -1307,6 +1308,11 @@ static __poll_t smc_poll_mask(struct socket *sock, __poll_t events) } } } else { + if (sk->sk_state != SMC_CLOSED) { + release_sock(sk); + sock_poll_wait(file, sk_sleep(sk), wait); + lock_sock(sk); + } if (sk->sk_err) mask |= EPOLLERR; if ((sk->sk_shutdown == SHUTDOWN_MASK) || @@ -1619,7 +1625,7 @@ static const struct proto_ops smc_sock_ops = { .socketpair = sock_no_socketpair, .accept = smc_accept, .getname = smc_getname, - .poll_mask = smc_poll_mask, + .poll = smc_poll, .ioctl = smc_ioctl, .listen = smc_listen, .shutdown = smc_shutdown, diff --git a/net/socket.c b/net/socket.c index 8a109012608a..a564c6ed19d5 100644 --- a/net/socket.c +++ b/net/socket.c @@ -117,10 +117,8 @@ static ssize_t sock_write_iter(struct kiocb *iocb, struct iov_iter *from); static int sock_mmap(struct file *file, struct vm_area_struct *vma); static int sock_close(struct inode *inode, struct file *file); -static struct wait_queue_head *sock_get_poll_head(struct file *file, - __poll_t events); -static __poll_t sock_poll_mask(struct file *file, __poll_t); -static __poll_t sock_poll(struct file *file, struct poll_table_struct *wait); +static __poll_t sock_poll(struct file *file, + struct poll_table_struct *wait); static long sock_ioctl(struct file *file, unsigned int cmd, unsigned long arg); #ifdef CONFIG_COMPAT static long compat_sock_ioctl(struct file *file, @@ -143,8 +141,6 @@ static const struct file_operations socket_file_ops = { .llseek = no_llseek, .read_iter = sock_read_iter, .write_iter = sock_write_iter, - .get_poll_head = sock_get_poll_head, - .poll_mask = sock_poll_mask, .poll = sock_poll, .unlocked_ioctl = sock_ioctl, #ifdef CONFIG_COMPAT @@ -1130,48 +1126,14 @@ out_release: } EXPORT_SYMBOL(sock_create_lite); -static struct wait_queue_head *sock_get_poll_head(struct file *file, - __poll_t events) -{ - struct socket *sock = file->private_data; - - if (!sock->ops->poll_mask) - return NULL; - sock_poll_busy_loop(sock, events); - return sk_sleep(sock->sk); -} - -static __poll_t sock_poll_mask(struct file *file, __poll_t events) -{ - struct socket *sock = file->private_data; - - /* - * We need to be sure we are in sync with the socket flags modification. - * - * This memory barrier is paired in the wq_has_sleeper. - */ - smp_mb(); - - /* this socket can poll_ll so tell the system call */ - return sock->ops->poll_mask(sock, events) | - (sk_can_busy_loop(sock->sk) ? POLL_BUSY_LOOP : 0); -} - /* No kernel lock held - perfect */ static __poll_t sock_poll(struct file *file, poll_table *wait) { struct socket *sock = file->private_data; - __poll_t events = poll_requested_events(wait), mask = 0; - - if (sock->ops->poll) { - sock_poll_busy_loop(sock, events); - mask = sock->ops->poll(file, sock, wait); - } else if (sock->ops->poll_mask) { - sock_poll_wait(file, sock_get_poll_head(file, events), wait); - mask = sock->ops->poll_mask(sock, events); - } + __poll_t events = poll_requested_events(wait); - return mask | sock_poll_busy_flag(sock); + sock_poll_busy_loop(sock, events); + return sock->ops->poll(file, sock, wait) | sock_poll_busy_flag(sock); } static int sock_mmap(struct file *file, struct vm_area_struct *vma) diff --git a/net/tipc/socket.c b/net/tipc/socket.c index 14a5d055717d..930852c54d7a 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -692,9 +692,10 @@ static int tipc_getname(struct socket *sock, struct sockaddr *uaddr, } /** - * tipc_poll - read pollmask + * tipc_poll - read and possibly block on pollmask * @file: file structure associated with the socket * @sock: socket for which to calculate the poll bits + * @wait: ??? * * Returns pollmask value * @@ -708,12 +709,15 @@ static int tipc_getname(struct socket *sock, struct sockaddr *uaddr, * imply that the operation will succeed, merely that it should be performed * and will not block. */ -static __poll_t tipc_poll_mask(struct socket *sock, __poll_t events) +static __poll_t tipc_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; struct tipc_sock *tsk = tipc_sk(sk); __poll_t revents = 0; + sock_poll_wait(file, sk_sleep(sk), wait); + if (sk->sk_shutdown & RCV_SHUTDOWN) revents |= EPOLLRDHUP | EPOLLIN | EPOLLRDNORM; if (sk->sk_shutdown == SHUTDOWN_MASK) @@ -3033,7 +3037,7 @@ static const struct proto_ops msg_ops = { .socketpair = tipc_socketpair, .accept = sock_no_accept, .getname = tipc_getname, - .poll_mask = tipc_poll_mask, + .poll = tipc_poll, .ioctl = tipc_ioctl, .listen = sock_no_listen, .shutdown = tipc_shutdown, @@ -3054,7 +3058,7 @@ static const struct proto_ops packet_ops = { .socketpair = tipc_socketpair, .accept = tipc_accept, .getname = tipc_getname, - .poll_mask = tipc_poll_mask, + .poll = tipc_poll, .ioctl = tipc_ioctl, .listen = tipc_listen, .shutdown = tipc_shutdown, @@ -3075,7 +3079,7 @@ static const struct proto_ops stream_ops = { .socketpair = tipc_socketpair, .accept = tipc_accept, .getname = tipc_getname, - .poll_mask = tipc_poll_mask, + .poll = tipc_poll, .ioctl = tipc_ioctl, .listen = tipc_listen, .shutdown = tipc_shutdown, diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index a127d61e8af9..301f22430469 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -712,7 +712,7 @@ static int __init tls_register(void) build_protos(tls_prots[TLSV4], &tcp_prot); tls_sw_proto_ops = inet_stream_ops; - tls_sw_proto_ops.poll_mask = tls_sw_poll_mask; + tls_sw_proto_ops.poll = tls_sw_poll; tls_sw_proto_ops.splice_read = tls_sw_splice_read; #ifdef CONFIG_TLS_DEVICE diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index f127fac88acf..d2380548f8f6 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -919,22 +919,23 @@ splice_read_end: return copied ? : err; } -__poll_t tls_sw_poll_mask(struct socket *sock, __poll_t events) +unsigned int tls_sw_poll(struct file *file, struct socket *sock, + struct poll_table_struct *wait) { + unsigned int ret; struct sock *sk = sock->sk; struct tls_context *tls_ctx = tls_get_ctx(sk); struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx); - __poll_t mask; - /* Grab EPOLLOUT and EPOLLHUP from the underlying socket */ - mask = ctx->sk_poll_mask(sock, events); + /* Grab POLLOUT and POLLHUP from the underlying socket */ + ret = ctx->sk_poll(file, sock, wait); - /* Clear EPOLLIN bits, and set based on recv_pkt */ - mask &= ~(EPOLLIN | EPOLLRDNORM); + /* Clear POLLIN bits, and set based on recv_pkt */ + ret &= ~(POLLIN | POLLRDNORM); if (ctx->recv_pkt) - mask |= EPOLLIN | EPOLLRDNORM; + ret |= POLLIN | POLLRDNORM; - return mask; + return ret; } static int tls_read_size(struct strparser *strp, struct sk_buff *skb) @@ -1191,7 +1192,7 @@ int tls_set_sw_offload(struct sock *sk, struct tls_context *ctx, int tx) sk->sk_data_ready = tls_data_ready; write_unlock_bh(&sk->sk_callback_lock); - sw_ctx_rx->sk_poll_mask = sk->sk_socket->ops->poll_mask; + sw_ctx_rx->sk_poll = sk->sk_socket->ops->poll; strp_check_rcv(&sw_ctx_rx->strp); } diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 95b02a71fd47..e5473c03d667 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -638,8 +638,9 @@ static int unix_stream_connect(struct socket *, struct sockaddr *, static int unix_socketpair(struct socket *, struct socket *); static int unix_accept(struct socket *, struct socket *, int, bool); static int unix_getname(struct socket *, struct sockaddr *, int); -static __poll_t unix_poll_mask(struct socket *, __poll_t); -static __poll_t unix_dgram_poll_mask(struct socket *, __poll_t); +static __poll_t unix_poll(struct file *, struct socket *, poll_table *); +static __poll_t unix_dgram_poll(struct file *, struct socket *, + poll_table *); static int unix_ioctl(struct socket *, unsigned int, unsigned long); static int unix_shutdown(struct socket *, int); static int unix_stream_sendmsg(struct socket *, struct msghdr *, size_t); @@ -680,7 +681,7 @@ static const struct proto_ops unix_stream_ops = { .socketpair = unix_socketpair, .accept = unix_accept, .getname = unix_getname, - .poll_mask = unix_poll_mask, + .poll = unix_poll, .ioctl = unix_ioctl, .listen = unix_listen, .shutdown = unix_shutdown, @@ -703,7 +704,7 @@ static const struct proto_ops unix_dgram_ops = { .socketpair = unix_socketpair, .accept = sock_no_accept, .getname = unix_getname, - .poll_mask = unix_dgram_poll_mask, + .poll = unix_dgram_poll, .ioctl = unix_ioctl, .listen = sock_no_listen, .shutdown = unix_shutdown, @@ -725,7 +726,7 @@ static const struct proto_ops unix_seqpacket_ops = { .socketpair = unix_socketpair, .accept = unix_accept, .getname = unix_getname, - .poll_mask = unix_dgram_poll_mask, + .poll = unix_dgram_poll, .ioctl = unix_ioctl, .listen = unix_listen, .shutdown = unix_shutdown, @@ -2629,10 +2630,13 @@ static int unix_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) return err; } -static __poll_t unix_poll_mask(struct socket *sock, __poll_t events) +static __poll_t unix_poll(struct file *file, struct socket *sock, poll_table *wait) { struct sock *sk = sock->sk; - __poll_t mask = 0; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; /* exceptional events? */ if (sk->sk_err) @@ -2661,11 +2665,15 @@ static __poll_t unix_poll_mask(struct socket *sock, __poll_t events) return mask; } -static __poll_t unix_dgram_poll_mask(struct socket *sock, __poll_t events) +static __poll_t unix_dgram_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk, *other; - int writable; - __poll_t mask = 0; + unsigned int writable; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; /* exceptional events? */ if (sk->sk_err || !skb_queue_empty(&sk->sk_error_queue)) @@ -2691,7 +2699,7 @@ static __poll_t unix_dgram_poll_mask(struct socket *sock, __poll_t events) } /* No write status requested, avoid expensive OUT tests. */ - if (!(events & (EPOLLWRBAND|EPOLLWRNORM|EPOLLOUT))) + if (!(poll_requested_events(wait) & (EPOLLWRBAND|EPOLLWRNORM|EPOLLOUT))) return mask; writable = unix_writable(sk); diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c index bb5d5fa68c35..c1076c19b858 100644 --- a/net/vmw_vsock/af_vsock.c +++ b/net/vmw_vsock/af_vsock.c @@ -850,11 +850,18 @@ static int vsock_shutdown(struct socket *sock, int mode) return err; } -static __poll_t vsock_poll_mask(struct socket *sock, __poll_t events) +static __poll_t vsock_poll(struct file *file, struct socket *sock, + poll_table *wait) { - struct sock *sk = sock->sk; - struct vsock_sock *vsk = vsock_sk(sk); - __poll_t mask = 0; + struct sock *sk; + __poll_t mask; + struct vsock_sock *vsk; + + sk = sock->sk; + vsk = vsock_sk(sk); + + poll_wait(file, sk_sleep(sk), wait); + mask = 0; if (sk->sk_err) /* Signify that there has been an error on this socket. */ @@ -1084,7 +1091,7 @@ static const struct proto_ops vsock_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = vsock_getname, - .poll_mask = vsock_poll_mask, + .poll = vsock_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = vsock_shutdown, @@ -1842,7 +1849,7 @@ static const struct proto_ops vsock_stream_ops = { .socketpair = sock_no_socketpair, .accept = vsock_accept, .getname = vsock_getname, - .poll_mask = vsock_poll_mask, + .poll = vsock_poll, .ioctl = sock_no_ioctl, .listen = vsock_listen, .shutdown = vsock_shutdown, diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c index f93365ae0fdd..d49aa79b7997 100644 --- a/net/x25/af_x25.c +++ b/net/x25/af_x25.c @@ -1750,7 +1750,7 @@ static const struct proto_ops x25_proto_ops = { .socketpair = sock_no_socketpair, .accept = x25_accept, .getname = x25_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = x25_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = compat_x25_ioctl, diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 3b3410ada097..59fb7d3c36a3 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -303,9 +303,10 @@ static int xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len) return (xs->zc) ? xsk_zc_xmit(sk) : xsk_generic_xmit(sk, m, total_len); } -static __poll_t xsk_poll_mask(struct socket *sock, __poll_t events) +static unsigned int xsk_poll(struct file *file, struct socket *sock, + struct poll_table_struct *wait) { - __poll_t mask = datagram_poll_mask(sock, events); + unsigned int mask = datagram_poll(file, sock, wait); struct sock *sk = sock->sk; struct xdp_sock *xs = xdp_sk(sk); @@ -696,7 +697,7 @@ static const struct proto_ops xsk_proto_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = xsk_poll_mask, + .poll = xsk_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, -- cgit v1.2.3 From 4bb6e96ab808f88d746343637f0cc2243b527da5 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 27 Jun 2018 23:26:01 -0700 Subject: lib/percpu_ida.c: don't do alloc from per-CPU list if there is none In commit 804209d8a009 ("lib/percpu_ida.c: use _irqsave() instead of local_irq_save() + spin_lock") I inlined alloc_local_tag() and mixed up the >= check from percpu_ida_alloc() with the one in alloc_local_tag(). Don't alloc from per-CPU freelist if ->nr_free is zero. Link: http://lkml.kernel.org/r/20180613075830.c3zeva52fuj6fxxv@linutronix.de Fixes: 804209d8a009 ("lib/percpu_ida.c: use _irqsave() instead of local_irq_save() + spin_lock") Signed-off-by: Sebastian Andrzej Siewior Reported-by: David Disseldorp Tested-by: David Disseldorp Cc: Thomas Gleixner Cc: Nicholas Bellinger Cc: Shaohua Li Cc: Kent Overstreet Cc: Matthew Wilcox Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/percpu_ida.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/percpu_ida.c b/lib/percpu_ida.c index 9bbd9c5d375a..beb14839b41a 100644 --- a/lib/percpu_ida.c +++ b/lib/percpu_ida.c @@ -141,7 +141,7 @@ int percpu_ida_alloc(struct percpu_ida *pool, int state) spin_lock_irqsave(&tags->lock, flags); /* Fastpath */ - if (likely(tags->nr_free >= 0)) { + if (likely(tags->nr_free)) { tag = tags->freelist[--tags->nr_free]; spin_unlock_irqrestore(&tags->lock, flags); return tag; -- cgit v1.2.3 From 28557cc106e6d2aa8b8c5c7687ea9f8055ff3911 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 27 Jun 2018 23:26:05 -0700 Subject: Revert mm/vmstat.c: fix vmstat_update() preemption BUG Revert commit c7f26ccfb2c3 ("mm/vmstat.c: fix vmstat_update() preemption BUG"). Steven saw a "using smp_processor_id() in preemptible" message and added a preempt_disable() section around it to keep it quiet. This is not the right thing to do it does not fix the real problem. vmstat_update() is invoked by a kworker on a specific CPU. This worker it bound to this CPU. The name of the worker was "kworker/1:1" so it should have been a worker which was bound to CPU1. A worker which can run on any CPU would have a `u' before the first digit. smp_processor_id() can be used in a preempt-enabled region as long as the task is bound to a single CPU which is the case here. If it could run on an arbitrary CPU then this is the problem we have an should seek to resolve. Not only this smp_processor_id() must not be migrated to another CPU but also refresh_cpu_vm_stats() which might access wrong per-CPU variables. Not to mention that other code relies on the fact that such a worker runs on one specific CPU only. Therefore revert that commit and we should look instead what broke the affinity mask of the kworker. Link: http://lkml.kernel.org/r/20180504104451.20278-1-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior Cc: Steven J. Hill Cc: Tejun Heo Cc: Vlastimil Babka Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmstat.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/mm/vmstat.c b/mm/vmstat.c index 75eda9c2b260..8ba0870ecddd 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -1796,11 +1796,9 @@ static void vmstat_update(struct work_struct *w) * to occur in the future. Keep on running the * update worker thread. */ - preempt_disable(); queue_delayed_work_on(smp_processor_id(), mm_percpu_wq, this_cpu_ptr(&vmstat_work), round_jiffies_relative(sysctl_stat_interval)); - preempt_enable(); } } -- cgit v1.2.3 From d50d82faa0c964e31f7a946ba8aba7c715ca7ab0 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Wed, 27 Jun 2018 23:26:09 -0700 Subject: slub: fix failure when we delete and create a slab cache In kernel 4.17 I removed some code from dm-bufio that did slab cache merging (commit 21bb13276768: "dm bufio: remove code that merges slab caches") - both slab and slub support merging caches with identical attributes, so dm-bufio now just calls kmem_cache_create and relies on implicit merging. This uncovered a bug in the slub subsystem - if we delete a cache and immediatelly create another cache with the same attributes, it fails because of duplicate filename in /sys/kernel/slab/. The slub subsystem offloads freeing the cache to a workqueue - and if we create the new cache before the workqueue runs, it complains because of duplicate filename in sysfs. This patch fixes the bug by moving the call of kobject_del from sysfs_slab_remove_workfn to shutdown_cache. kobject_del must be called while we hold slab_mutex - so that the sysfs entry is deleted before a cache with the same attributes could be created. Running device-mapper-test-suite with: dmtest run --suite thin-provisioning -n /commit_failure_causes_fallback/ triggered: Buffer I/O error on dev dm-0, logical block 1572848, async page read device-mapper: thin: 253:1: metadata operation 'dm_pool_alloc_data_block' failed: error = -5 device-mapper: thin: 253:1: aborting current metadata transaction sysfs: cannot create duplicate filename '/kernel/slab/:a-0000144' CPU: 2 PID: 1037 Comm: kworker/u48:1 Not tainted 4.17.0.snitm+ #25 Hardware name: Supermicro SYS-1029P-WTR/X11DDW-L, BIOS 2.0a 12/06/2017 Workqueue: dm-thin do_worker [dm_thin_pool] Call Trace: dump_stack+0x5a/0x73 sysfs_warn_dup+0x58/0x70 sysfs_create_dir_ns+0x77/0x80 kobject_add_internal+0xba/0x2e0 kobject_init_and_add+0x70/0xb0 sysfs_slab_add+0xb1/0x250 __kmem_cache_create+0x116/0x150 create_cache+0xd9/0x1f0 kmem_cache_create_usercopy+0x1c1/0x250 kmem_cache_create+0x18/0x20 dm_bufio_client_create+0x1ae/0x410 [dm_bufio] dm_block_manager_create+0x5e/0x90 [dm_persistent_data] __create_persistent_data_objects+0x38/0x940 [dm_thin_pool] dm_pool_abort_metadata+0x64/0x90 [dm_thin_pool] metadata_operation_failed+0x59/0x100 [dm_thin_pool] alloc_data_block.isra.53+0x86/0x180 [dm_thin_pool] process_cell+0x2a3/0x550 [dm_thin_pool] do_worker+0x28d/0x8f0 [dm_thin_pool] process_one_work+0x171/0x370 worker_thread+0x49/0x3f0 kthread+0xf8/0x130 ret_from_fork+0x35/0x40 kobject_add_internal failed for :a-0000144 with -EEXIST, don't try to register things with the same name in the same directory. kmem_cache_create(dm_bufio_buffer-16) failed with error -17 Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1806151817130.6333@file01.intranet.prod.int.rdu2.redhat.com Signed-off-by: Mikulas Patocka Reported-by: Mike Snitzer Tested-by: Mike Snitzer Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/slub_def.h | 4 ++++ mm/slab_common.c | 4 ++++ mm/slub.c | 7 ++++++- 3 files changed, 14 insertions(+), 1 deletion(-) diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 09fa2c6f0e68..3a1a1dbc6f49 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -155,8 +155,12 @@ struct kmem_cache { #ifdef CONFIG_SYSFS #define SLAB_SUPPORTS_SYSFS +void sysfs_slab_unlink(struct kmem_cache *); void sysfs_slab_release(struct kmem_cache *); #else +static inline void sysfs_slab_unlink(struct kmem_cache *s) +{ +} static inline void sysfs_slab_release(struct kmem_cache *s) { } diff --git a/mm/slab_common.c b/mm/slab_common.c index 890b1f04a03a..2296caf87bfb 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -567,10 +567,14 @@ static int shutdown_cache(struct kmem_cache *s) list_del(&s->list); if (s->flags & SLAB_TYPESAFE_BY_RCU) { +#ifdef SLAB_SUPPORTS_SYSFS + sysfs_slab_unlink(s); +#endif list_add_tail(&s->list, &slab_caches_to_rcu_destroy); schedule_work(&slab_caches_to_rcu_destroy_work); } else { #ifdef SLAB_SUPPORTS_SYSFS + sysfs_slab_unlink(s); sysfs_slab_release(s); #else slab_kmem_cache_release(s); diff --git a/mm/slub.c b/mm/slub.c index a3b8467c14af..51258eff4178 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -5667,7 +5667,6 @@ static void sysfs_slab_remove_workfn(struct work_struct *work) kset_unregister(s->memcg_kset); #endif kobject_uevent(&s->kobj, KOBJ_REMOVE); - kobject_del(&s->kobj); out: kobject_put(&s->kobj); } @@ -5752,6 +5751,12 @@ static void sysfs_slab_remove(struct kmem_cache *s) schedule_work(&s->kobj_remove_work); } +void sysfs_slab_unlink(struct kmem_cache *s) +{ + if (slab_state >= FULL) + kobject_del(&s->kobj); +} + void sysfs_slab_release(struct kmem_cache *s) { if (slab_state >= FULL) -- cgit v1.2.3 From 124049decbb121ec32742c94fb5d9d6bed8f24d8 Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Wed, 27 Jun 2018 23:26:13 -0700 Subject: x86/e820: put !E820_TYPE_RAM regions into memblock.reserved There is a kernel panic that is triggered when reading /proc/kpageflags on the kernel booted with kernel parameter 'memmap=nn[KMG]!ss[KMG]': BUG: unable to handle kernel paging request at fffffffffffffffe PGD 9b20e067 P4D 9b20e067 PUD 9b210067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 2 PID: 1728 Comm: page-types Not tainted 4.17.0-rc6-mm1-v4.17-rc6-180605-0816-00236-g2dfb086ef02c+ #160 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.fc28 04/01/2014 RIP: 0010:stable_page_flags+0x27/0x3c0 Code: 00 00 00 0f 1f 44 00 00 48 85 ff 0f 84 a0 03 00 00 41 54 55 49 89 fc 53 48 8b 57 08 48 8b 2f 48 8d 42 ff 83 e2 01 48 0f 44 c7 <48> 8b 00 f6 c4 01 0f 84 10 03 00 00 31 db 49 8b 54 24 08 4c 89 e7 RSP: 0018:ffffbbd44111fde0 EFLAGS: 00010202 RAX: fffffffffffffffe RBX: 00007fffffffeff9 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000202 RDI: ffffed1182fff5c0 RBP: ffffffffffffffff R08: 0000000000000001 R09: 0000000000000001 R10: ffffbbd44111fed8 R11: 0000000000000000 R12: ffffed1182fff5c0 R13: 00000000000bffd7 R14: 0000000002fff5c0 R15: ffffbbd44111ff10 FS: 00007efc4335a500(0000) GS:ffff93a5bfc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffffe CR3: 00000000b2a58000 CR4: 00000000001406e0 Call Trace: kpageflags_read+0xc7/0x120 proc_reg_read+0x3c/0x60 __vfs_read+0x36/0x170 vfs_read+0x89/0x130 ksys_pread64+0x71/0x90 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7efc42e75e23 Code: 09 00 ba 9f 01 00 00 e8 ab 81 f4 ff 66 2e 0f 1f 84 00 00 00 00 00 90 83 3d 29 0a 2d 00 00 75 13 49 89 ca b8 11 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 db d3 01 00 48 89 04 24 According to kernel bisection, this problem became visible due to commit f7f99100d8d9 ("mm: stop zeroing memory during allocation in vmemmap") which changes how struct pages are initialized. Memblock layout affects the pfn ranges covered by node/zone. Consider that we have a VM with 2 NUMA nodes and each node has 4GB memory, and the default (no memmap= given) memblock layout is like below: MEMBLOCK configuration: memory size = 0x00000001fff75c00 reserved size = 0x000000000300c000 memory.cnt = 0x4 memory[0x0] [0x0000000000001000-0x000000000009efff], 0x000000000009e000 bytes on node 0 flags: 0x0 memory[0x1] [0x0000000000100000-0x00000000bffd6fff], 0x00000000bfed7000 bytes on node 0 flags: 0x0 memory[0x2] [0x0000000100000000-0x000000013fffffff], 0x0000000040000000 bytes on node 0 flags: 0x0 memory[0x3] [0x0000000140000000-0x000000023fffffff], 0x0000000100000000 bytes on node 1 flags: 0x0 ... If you give memmap=1G!4G (so it just covers memory[0x2]), the range [0x100000000-0x13fffffff] is gone: MEMBLOCK configuration: memory size = 0x00000001bff75c00 reserved size = 0x000000000300c000 memory.cnt = 0x3 memory[0x0] [0x0000000000001000-0x000000000009efff], 0x000000000009e000 bytes on node 0 flags: 0x0 memory[0x1] [0x0000000000100000-0x00000000bffd6fff], 0x00000000bfed7000 bytes on node 0 flags: 0x0 memory[0x2] [0x0000000140000000-0x000000023fffffff], 0x0000000100000000 bytes on node 1 flags: 0x0 ... This causes shrinking node 0's pfn range because it is calculated by the address range of memblock.memory. So some of struct pages in the gap range are left uninitialized. We have a function zero_resv_unavail() which does zeroing the struct pages within the reserved unavailable range (i.e. memblock.memory && !memblock.reserved). This patch utilizes it to cover all unavailable ranges by putting them into memblock.reserved. Link: http://lkml.kernel.org/r/20180615072947.GB23273@hori1.linux.bs1.fc.nec.co.jp Fixes: f7f99100d8d9 ("mm: stop zeroing memory during allocation in vmemmap") Signed-off-by: Naoya Horiguchi Tested-by: Oscar Salvador Tested-by: "Herton R. Krzesinski" Acked-by: Michal Hocko Reviewed-by: Pavel Tatashin Cc: Steven Sistare Cc: Daniel Jordan Cc: Matthew Wilcox Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/kernel/e820.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index d1f25c831447..c88c23c658c1 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -1248,6 +1248,7 @@ void __init e820__memblock_setup(void) { int i; u64 end; + u64 addr = 0; /* * The bootstrap memblock region count maximum is 128 entries @@ -1264,13 +1265,21 @@ void __init e820__memblock_setup(void) struct e820_entry *entry = &e820_table->entries[i]; end = entry->addr + entry->size; + if (addr < entry->addr) + memblock_reserve(addr, entry->addr - addr); + addr = end; if (end != (resource_size_t)end) continue; + /* + * all !E820_TYPE_RAM ranges (including gap ranges) are put + * into memblock.reserved to make sure that struct pages in + * such regions are not left uninitialized after bootup. + */ if (entry->type != E820_TYPE_RAM && entry->type != E820_TYPE_RESERVED_KERN) - continue; - - memblock_add(entry->addr, entry->size); + memblock_reserve(entry->addr, entry->size); + else + memblock_add(entry->addr, entry->size); } /* Throw away partial pages: */ -- cgit v1.2.3 From f77bc3a82ce58fe7977a11f28e0b6cac8a9e087c Mon Sep 17 00:00:00 2001 From: Souptick Joarder Date: Wed, 27 Jun 2018 23:26:17 -0700 Subject: include/linux/dax.h: dax_iomap_fault() returns vm_fault_t Commit 1c8f422059ae ("mm: change return type to vm_fault_t") missed a conversion. It's not a big problem at present because mainline is still using typedef int vm_fault_t; Fixes: 1c8f422059ae ("mm: change return type to vm_fault_t") Link: http://lkml.kernel.org/r/20180620172046.GA27894@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder Reviewed-by: Andrew Morton Cc: Matthew Wilcox Cc: Dan Williams Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/dax.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/dax.h b/include/linux/dax.h index 3855e3800f48..deb0f663252f 100644 --- a/include/linux/dax.h +++ b/include/linux/dax.h @@ -135,7 +135,7 @@ void dax_flush(struct dax_device *dax_dev, void *addr, size_t size); ssize_t dax_iomap_rw(struct kiocb *iocb, struct iov_iter *iter, const struct iomap_ops *ops); -int dax_iomap_fault(struct vm_fault *vmf, enum page_entry_size pe_size, +vm_fault_t dax_iomap_fault(struct vm_fault *vmf, enum page_entry_size pe_size, pfn_t *pfnp, int *errp, const struct iomap_ops *ops); vm_fault_t dax_finish_sync_fault(struct vm_fault *vmf, enum page_entry_size pe_size, pfn_t pfn); -- cgit v1.2.3 From dd275caf4a0d9b219fffe49288b6cc33cd564312 Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Wed, 27 Jun 2018 23:26:20 -0700 Subject: kasan: depend on CONFIG_SLUB_DEBUG KASAN depends on having access to some of the accounting that SLUB_DEBUG does; without it, there are immediate crashes [1]. So, the natural thing to do is to make KASAN select SLUB_DEBUG. [1] http://lkml.kernel.org/r/CAHmME9rtoPwxUSnktxzKso14iuVCWT7BE_-_8PAC=pGw1iJnQg@mail.gmail.com Link: http://lkml.kernel.org/r/20180622154623.25388-1-Jason@zx2c4.com Fixes: f9e13c0a5a33 ("slab, slub: skip unnecessary kasan_cache_shutdown()") Signed-off-by: Jason A. Donenfeld Acked-by: Michal Hocko Reviewed-by: Shakeel Butt Acked-by: Christoph Lameter Cc: Shakeel Butt Cc: David Rientjes Cc: Pekka Enberg Cc: Joonsoo Kim Cc: Andrey Ryabinin Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/Kconfig.kasan | 1 + 1 file changed, 1 insertion(+) diff --git a/lib/Kconfig.kasan b/lib/Kconfig.kasan index 3d35d062970d..c253c1b46c6b 100644 --- a/lib/Kconfig.kasan +++ b/lib/Kconfig.kasan @@ -6,6 +6,7 @@ if HAVE_ARCH_KASAN config KASAN bool "KASan: runtime memory debugger" depends on SLUB || (SLAB && !DEBUG_SLAB) + select SLUB_DEBUG if SLUB select CONSTRUCTORS select STACKDEPOT help -- cgit v1.2.3 From 008e682b5bf1bdd735b2eecf2f3903d7da49dd52 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 27 Jun 2018 23:26:24 -0700 Subject: proc: add Alexey to MAINTAINERS I know I'll regret it. Link: http://lkml.kernel.org/r/20180627194840.GA18113@avx2 Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index bfb8a18d4793..07d1576fc766 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11481,6 +11481,15 @@ W: http://wireless.kernel.org/en/users/Drivers/p54 S: Obsolete F: drivers/net/wireless/intersil/prism54/ +PROC FILESYSTEM +R: Alexey Dobriyan +L: linux-kernel@vger.kernel.org +L: linux-fsdevel@vger.kernel.org +S: Maintained +F: fs/proc/ +F: include/linux/proc_fs.h +F: tools/testing/selftests/proc/ + PROC SYSCTL M: "Luis R. Rodriguez" M: Kees Cook -- cgit v1.2.3 From 5a267832c2ec47b2dad0fdb291a96bb5b8869315 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 22 Jun 2018 10:55:45 -0700 Subject: MIPS: Call dump_stack() from show_regs() The generic nmi_cpu_backtrace() function calls show_regs() when a struct pt_regs is available, and dump_stack() otherwise. If we were to make use of the generic nmi_cpu_backtrace() with MIPS' current implementation of show_regs() this would mean that we see only register data with no accompanying stack information, in contrast with our current implementation which calls dump_stack() regardless of whether register state is available. In preparation for making use of the generic nmi_cpu_backtrace() to implement arch_trigger_cpumask_backtrace(), have our implementation of show_regs() call dump_stack() and drop the explicit dump_stack() call in arch_dump_stack() which is invoked by arch_trigger_cpumask_backtrace(). This will allow the output we produce to remain the same after a later patch switches to using nmi_cpu_backtrace(). It may mean that we produce extra stack output in other uses of show_regs(), but this: 1) Seems harmless. 2) Is good for consistency between arch_trigger_cpumask_backtrace() and other users of show_regs(). 3) Matches the behaviour of the ARM & PowerPC architectures. Marked for stable back to v4.9 as a prerequisite of the following patch "MIPS: Call dump_stack() from show_regs()". Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/19596/ Cc: James Hogan Cc: Ralf Baechle Cc: Huacai Chen Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.9+ --- arch/mips/kernel/process.c | 4 ++-- arch/mips/kernel/traps.c | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 8d85046adcc8..d4cfeb931382 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -663,8 +663,8 @@ static void arch_dump_stack(void *info) if (regs) show_regs(regs); - - dump_stack(); + else + dump_stack(); } void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index d67fa74622ee..8d505a21396e 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -351,6 +351,7 @@ static void __show_regs(const struct pt_regs *regs) void show_regs(struct pt_regs *regs) { __show_regs((struct pt_regs *)regs); + dump_stack(); } void show_registers(struct pt_regs *regs) -- cgit v1.2.3 From 363a3d3fb7d478d7dd49b8c6294436b8ba5984cc Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Mon, 11 Jun 2018 16:46:40 +0800 Subject: drm/amd/powerplay: correct vega12 thermal support as true Thermal support is enabled on vega12. Signed-off-by: Evan Quan Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c index 782e2098824d..6955c359b706 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c @@ -81,6 +81,7 @@ static void vega12_set_default_registry_data(struct pp_hwmgr *hwmgr) data->registry_data.disallowed_features = 0x0; data->registry_data.od_state_in_dc_support = 0; + data->registry_data.thermal_support = 1; data->registry_data.skip_baco_hardware = 0; data->registry_data.log_avfs_param = 0; -- cgit v1.2.3 From 36953aa94a8fcc884b970d63d3e4c650257dd03e Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Mon, 28 May 2018 08:59:16 +0800 Subject: drm/amd/powerplay: correct vega12 bootup values settings The vbios firmware structure changed between v3_1 and v3_2. So, the code to setup bootup values needs different paths based on header version. Signed-off-by: Evan Quan Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.c | 94 +++++++++++++++++++--- drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.h | 3 + drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c | 3 + drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.h | 3 + 4 files changed, 91 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.c b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.c index 5325661fedff..aa2faffef034 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.c @@ -512,14 +512,82 @@ int pp_atomfwctrl_get_clk_information_by_clkid(struct pp_hwmgr *hwmgr, BIOS_CLKI return 0; } +static void pp_atomfwctrl_copy_vbios_bootup_values_3_2(struct pp_hwmgr *hwmgr, + struct pp_atomfwctrl_bios_boot_up_values *boot_values, + struct atom_firmware_info_v3_2 *fw_info) +{ + uint32_t frequency = 0; + + boot_values->ulRevision = fw_info->firmware_revision; + boot_values->ulGfxClk = fw_info->bootup_sclk_in10khz; + boot_values->ulUClk = fw_info->bootup_mclk_in10khz; + boot_values->usVddc = fw_info->bootup_vddc_mv; + boot_values->usVddci = fw_info->bootup_vddci_mv; + boot_values->usMvddc = fw_info->bootup_mvddc_mv; + boot_values->usVddGfx = fw_info->bootup_vddgfx_mv; + boot_values->ucCoolingID = fw_info->coolingsolution_id; + boot_values->ulSocClk = 0; + boot_values->ulDCEFClk = 0; + + if (!pp_atomfwctrl_get_clk_information_by_clkid(hwmgr, SMU11_SYSPLL0_SOCCLK_ID, &frequency)) + boot_values->ulSocClk = frequency; + + if (!pp_atomfwctrl_get_clk_information_by_clkid(hwmgr, SMU11_SYSPLL0_DCEFCLK_ID, &frequency)) + boot_values->ulDCEFClk = frequency; + + if (!pp_atomfwctrl_get_clk_information_by_clkid(hwmgr, SMU11_SYSPLL0_ECLK_ID, &frequency)) + boot_values->ulEClk = frequency; + + if (!pp_atomfwctrl_get_clk_information_by_clkid(hwmgr, SMU11_SYSPLL0_VCLK_ID, &frequency)) + boot_values->ulVClk = frequency; + + if (!pp_atomfwctrl_get_clk_information_by_clkid(hwmgr, SMU11_SYSPLL0_DCLK_ID, &frequency)) + boot_values->ulDClk = frequency; +} + +static void pp_atomfwctrl_copy_vbios_bootup_values_3_1(struct pp_hwmgr *hwmgr, + struct pp_atomfwctrl_bios_boot_up_values *boot_values, + struct atom_firmware_info_v3_1 *fw_info) +{ + uint32_t frequency = 0; + + boot_values->ulRevision = fw_info->firmware_revision; + boot_values->ulGfxClk = fw_info->bootup_sclk_in10khz; + boot_values->ulUClk = fw_info->bootup_mclk_in10khz; + boot_values->usVddc = fw_info->bootup_vddc_mv; + boot_values->usVddci = fw_info->bootup_vddci_mv; + boot_values->usMvddc = fw_info->bootup_mvddc_mv; + boot_values->usVddGfx = fw_info->bootup_vddgfx_mv; + boot_values->ucCoolingID = fw_info->coolingsolution_id; + boot_values->ulSocClk = 0; + boot_values->ulDCEFClk = 0; + + if (!pp_atomfwctrl_get_clk_information_by_clkid(hwmgr, SMU9_SYSPLL0_SOCCLK_ID, &frequency)) + boot_values->ulSocClk = frequency; + + if (!pp_atomfwctrl_get_clk_information_by_clkid(hwmgr, SMU9_SYSPLL0_DCEFCLK_ID, &frequency)) + boot_values->ulDCEFClk = frequency; + + if (!pp_atomfwctrl_get_clk_information_by_clkid(hwmgr, SMU9_SYSPLL0_ECLK_ID, &frequency)) + boot_values->ulEClk = frequency; + + if (!pp_atomfwctrl_get_clk_information_by_clkid(hwmgr, SMU9_SYSPLL0_VCLK_ID, &frequency)) + boot_values->ulVClk = frequency; + + if (!pp_atomfwctrl_get_clk_information_by_clkid(hwmgr, SMU9_SYSPLL0_DCLK_ID, &frequency)) + boot_values->ulDClk = frequency; +} + int pp_atomfwctrl_get_vbios_bootup_values(struct pp_hwmgr *hwmgr, struct pp_atomfwctrl_bios_boot_up_values *boot_values) { - struct atom_firmware_info_v3_1 *info = NULL; + struct atom_firmware_info_v3_2 *fwinfo_3_2; + struct atom_firmware_info_v3_1 *fwinfo_3_1; + struct atom_common_table_header *info = NULL; uint16_t ix; ix = GetIndexIntoMasterDataTable(firmwareinfo); - info = (struct atom_firmware_info_v3_1 *) + info = (struct atom_common_table_header *) smu_atom_get_data_table(hwmgr->adev, ix, NULL, NULL, NULL); @@ -528,16 +596,18 @@ int pp_atomfwctrl_get_vbios_bootup_values(struct pp_hwmgr *hwmgr, return -EINVAL; } - boot_values->ulRevision = info->firmware_revision; - boot_values->ulGfxClk = info->bootup_sclk_in10khz; - boot_values->ulUClk = info->bootup_mclk_in10khz; - boot_values->usVddc = info->bootup_vddc_mv; - boot_values->usVddci = info->bootup_vddci_mv; - boot_values->usMvddc = info->bootup_mvddc_mv; - boot_values->usVddGfx = info->bootup_vddgfx_mv; - boot_values->ucCoolingID = info->coolingsolution_id; - boot_values->ulSocClk = 0; - boot_values->ulDCEFClk = 0; + if ((info->format_revision == 3) && (info->content_revision == 2)) { + fwinfo_3_2 = (struct atom_firmware_info_v3_2 *)info; + pp_atomfwctrl_copy_vbios_bootup_values_3_2(hwmgr, + boot_values, fwinfo_3_2); + } else if ((info->format_revision == 3) && (info->content_revision == 1)) { + fwinfo_3_1 = (struct atom_firmware_info_v3_1 *)info; + pp_atomfwctrl_copy_vbios_bootup_values_3_1(hwmgr, + boot_values, fwinfo_3_1); + } else { + pr_info("Fw info table revision does not match!"); + return -EINVAL; + } return 0; } diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.h b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.h index fe10aa4db5e6..745bd3809549 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.h +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.h @@ -136,6 +136,9 @@ struct pp_atomfwctrl_bios_boot_up_values { uint32_t ulUClk; uint32_t ulSocClk; uint32_t ulDCEFClk; + uint32_t ulEClk; + uint32_t ulVClk; + uint32_t ulDClk; uint16_t usVddc; uint16_t usVddci; uint16_t usMvddc; diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c index 6955c359b706..c98e5de777cd 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c @@ -804,6 +804,9 @@ static int vega12_init_smc_table(struct pp_hwmgr *hwmgr) data->vbios_boot_state.soc_clock = boot_up_values.ulSocClk; data->vbios_boot_state.dcef_clock = boot_up_values.ulDCEFClk; data->vbios_boot_state.uc_cooling_id = boot_up_values.ucCoolingID; + data->vbios_boot_state.eclock = boot_up_values.ulEClk; + data->vbios_boot_state.dclock = boot_up_values.ulDClk; + data->vbios_boot_state.vclock = boot_up_values.ulVClk; smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_SetMinDeepSleepDcefclk, (uint32_t)(data->vbios_boot_state.dcef_clock / 100)); diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.h b/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.h index e81ded1ec198..49b38df8c7f2 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.h +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.h @@ -167,6 +167,9 @@ struct vega12_vbios_boot_state { uint32_t mem_clock; uint32_t soc_clock; uint32_t dcef_clock; + uint32_t eclock; + uint32_t dclock; + uint32_t vclock; }; #define DPMTABLE_OD_UPDATE_SCLK 0x00000001 -- cgit v1.2.3 From 1513b1c93f825f74751897258e0bdde64fd3bb6a Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Mon, 11 Jun 2018 15:20:39 +0800 Subject: drm/amd/powerplay: smc_dpm_info structure change A new member Vr2_I2C_address is added. Signed-off-by: Evan Quan Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/include/atomfirmware.h | 5 ++++- drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.c | 2 ++ drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.h | 2 ++ drivers/gpu/drm/amd/powerplay/hwmgr/vega12_processpptables.c | 2 ++ drivers/gpu/drm/amd/powerplay/inc/vega12/smu9_driver_if.h | 5 ++++- 5 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/include/atomfirmware.h b/drivers/gpu/drm/amd/include/atomfirmware.h index 092d800b703a..33b4de4ad66e 100644 --- a/drivers/gpu/drm/amd/include/atomfirmware.h +++ b/drivers/gpu/drm/amd/include/atomfirmware.h @@ -1433,7 +1433,10 @@ struct atom_smc_dpm_info_v4_1 uint8_t acggfxclkspreadpercent; uint16_t acggfxclkspreadfreq; - uint32_t boardreserved[10]; + uint8_t Vr2_I2C_address; + uint8_t padding_vr2[3]; + + uint32_t boardreserved[9]; }; /* diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.c b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.c index aa2faffef034..d27c1c9df286 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.c @@ -699,5 +699,7 @@ int pp_atomfwctrl_get_smc_dpm_information(struct pp_hwmgr *hwmgr, param->acggfxclkspreadpercent = info->acggfxclkspreadpercent; param->acggfxclkspreadfreq = info->acggfxclkspreadfreq; + param->Vr2_I2C_address = info->Vr2_I2C_address; + return 0; } diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.h b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.h index 745bd3809549..22e21668c93a 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.h +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.h @@ -210,6 +210,8 @@ struct pp_atomfwctrl_smc_dpm_parameters uint8_t acggfxclkspreadenabled; uint8_t acggfxclkspreadpercent; uint16_t acggfxclkspreadfreq; + + uint8_t Vr2_I2C_address; }; int pp_atomfwctrl_get_gpu_pll_dividers_vega10(struct pp_hwmgr *hwmgr, diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_processpptables.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_processpptables.c index 888ddca902d8..29914700ee82 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_processpptables.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_processpptables.c @@ -230,6 +230,8 @@ static int append_vbios_pptable(struct pp_hwmgr *hwmgr, PPTable_t *ppsmc_pptable ppsmc_pptable->AcgThresholdFreqLow = 0xFFFF; } + ppsmc_pptable->Vr2_I2C_address = smc_dpm_table.Vr2_I2C_address; + return 0; } diff --git a/drivers/gpu/drm/amd/powerplay/inc/vega12/smu9_driver_if.h b/drivers/gpu/drm/amd/powerplay/inc/vega12/smu9_driver_if.h index 2f8a3b983cce..b08526fd1619 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/vega12/smu9_driver_if.h +++ b/drivers/gpu/drm/amd/powerplay/inc/vega12/smu9_driver_if.h @@ -499,7 +499,10 @@ typedef struct { uint8_t AcgGfxclkSpreadPercent; uint16_t AcgGfxclkSpreadFreq; - uint32_t BoardReserved[10]; + uint8_t Vr2_I2C_address; + uint8_t padding_vr2[3]; + + uint32_t BoardReserved[9]; uint32_t MmHubPadding[7]; -- cgit v1.2.3 From bda3153998f3eb2cafa4a6311971143628eacdbc Mon Sep 17 00:00:00 2001 From: BingJing Chang Date: Thu, 28 Jun 2018 18:40:11 +0800 Subject: md/raid10: fix that replacement cannot complete recovery after reassemble During assemble, the spare marked for replacement is not checked. conf->fullsync cannot be updated to be 1. As a result, recovery will treat it as a clean array. All recovering sectors are skipped. Original device is replaced with the not-recovered spare. mdadm -C /dev/md0 -l10 -n4 -pn2 /dev/loop[0123] mdadm /dev/md0 -a /dev/loop4 mdadm /dev/md0 --replace /dev/loop0 mdadm -S /dev/md0 # stop array during recovery mdadm -A /dev/md0 /dev/loop[01234] After reassemble, you can see recovery go on, but it completes immediately. In fact, recovery is not actually processed. To solve this problem, we just add the missing logics for replacment spares. (In raid1.c or raid5.c, they have already been checked.) Reported-by: Alex Chen Reviewed-by: Alex Wu Reviewed-by: Chung-Chiang Cheng Signed-off-by: BingJing Chang Signed-off-by: Shaohua Li --- drivers/md/raid10.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 478cf446827f..35bd3a62451b 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -3893,6 +3893,13 @@ static int raid10_run(struct mddev *mddev) disk->rdev->saved_raid_disk < 0) conf->fullsync = 1; } + + if (disk->replacement && + !test_bit(In_sync, &disk->replacement->flags) && + disk->replacement->saved_raid_disk < 0) { + conf->fullsync = 1; + } + disk->recovery_disabled = mddev->recovery_disabled - 1; } -- cgit v1.2.3 From 4557641b4c7046625c026fb809c47ef0d43ae595 Mon Sep 17 00:00:00 2001 From: Ross Zwisler Date: Tue, 26 Jun 2018 16:30:39 -0600 Subject: pmem: only set QUEUE_FLAG_DAX for fsdax mode QUEUE_FLAG_DAX is an indication that a given block device supports filesystem DAX and should not be set for PMEM namespaces which are in "raw" mode. These namespaces lack struct page and are prevented from participating in filesystem DAX as of commit 569d0365f571 ("dax: require 'struct page' by default for filesystem dax"). Signed-off-by: Ross Zwisler Suggested-by: Mike Snitzer Fixes: 569d0365f571 ("dax: require 'struct page' by default for filesystem dax") Cc: stable@vger.kernel.org Acked-by: Dan Williams Reviewed-by: Toshi Kani Signed-off-by: Mike Snitzer --- drivers/nvdimm/pmem.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c index 68940356cad3..8b1fd7f1a224 100644 --- a/drivers/nvdimm/pmem.c +++ b/drivers/nvdimm/pmem.c @@ -414,7 +414,8 @@ static int pmem_attach_disk(struct device *dev, blk_queue_logical_block_size(q, pmem_sector_size(ndns)); blk_queue_max_hw_sectors(q, UINT_MAX); blk_queue_flag_set(QUEUE_FLAG_NONROT, q); - blk_queue_flag_set(QUEUE_FLAG_DAX, q); + if (pmem->pfn_flags & PFN_MAP) + blk_queue_flag_set(QUEUE_FLAG_DAX, q); q->queuedata = pmem; disk = alloc_disk_node(0, nid); -- cgit v1.2.3 From 15256f6cc4b44f2e70503758150267fd2a53c0d6 Mon Sep 17 00:00:00 2001 From: Ross Zwisler Date: Tue, 26 Jun 2018 16:30:40 -0600 Subject: dax: check for QUEUE_FLAG_DAX in bdev_dax_supported() Add an explicit check for QUEUE_FLAG_DAX to __bdev_dax_supported(). This is needed for DM configurations where the first element in the dm-linear or dm-stripe target supports DAX, but other elements do not. Without this check __bdev_dax_supported() will pass for such devices, letting a filesystem on that device mount with the DAX option. Signed-off-by: Ross Zwisler Suggested-by: Mike Snitzer Fixes: commit 545ed20e6df6 ("dm: add infrastructure for DAX support") Cc: stable@vger.kernel.org Acked-by: Dan Williams Reviewed-by: Toshi Kani Signed-off-by: Mike Snitzer --- drivers/dax/super.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/dax/super.c b/drivers/dax/super.c index 903d9c473749..45276abf03aa 100644 --- a/drivers/dax/super.c +++ b/drivers/dax/super.c @@ -86,6 +86,7 @@ bool __bdev_dax_supported(struct block_device *bdev, int blocksize) { struct dax_device *dax_dev; bool dax_enabled = false; + struct request_queue *q; pgoff_t pgoff; int err, id; void *kaddr; @@ -99,6 +100,13 @@ bool __bdev_dax_supported(struct block_device *bdev, int blocksize) return false; } + q = bdev_get_queue(bdev); + if (!q || !blk_queue_dax(q)) { + pr_debug("%s: error: request queue doesn't support dax\n", + bdevname(bdev, buf)); + return false; + } + err = bdev_dax_pgoff(bdev, 0, PAGE_SIZE, &pgoff); if (err) { pr_debug("%s: error: unaligned partition for dax\n", -- cgit v1.2.3 From dbc626597c39b24cefce09fbd8e9dea85869a801 Mon Sep 17 00:00:00 2001 From: Ross Zwisler Date: Tue, 26 Jun 2018 16:30:41 -0600 Subject: dm: prevent DAX mounts if not supported Currently device_supports_dax() just checks to see if the QUEUE_FLAG_DAX flag is set on the device's request queue to decide whether or not the device supports filesystem DAX. Really we should be using bdev_dax_supported() like filesystems do at mount time. This performs other tests like checking to make sure the dax_direct_access() path works. We also explicitly clear QUEUE_FLAG_DAX on the DM device's request queue if any of the underlying devices do not support DAX. This makes the handling of QUEUE_FLAG_DAX consistent with the setting/clearing of most other flags in dm_table_set_restrictions(). Now that bdev_dax_supported() explicitly checks for QUEUE_FLAG_DAX, this will ensure that filesystems built upon DM devices will only be able to mount with DAX if all underlying devices also support DAX. Signed-off-by: Ross Zwisler Fixes: commit 545ed20e6df6 ("dm: add infrastructure for DAX support") Cc: stable@vger.kernel.org Acked-by: Dan Williams Reviewed-by: Toshi Kani Signed-off-by: Mike Snitzer --- drivers/md/dm-table.c | 7 ++++--- drivers/md/dm.c | 3 +-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 938766794c2e..3d0e2c198f06 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -885,9 +885,7 @@ EXPORT_SYMBOL_GPL(dm_table_set_type); static int device_supports_dax(struct dm_target *ti, struct dm_dev *dev, sector_t start, sector_t len, void *data) { - struct request_queue *q = bdev_get_queue(dev->bdev); - - return q && blk_queue_dax(q); + return bdev_dax_supported(dev->bdev, PAGE_SIZE); } static bool dm_table_supports_dax(struct dm_table *t) @@ -1907,6 +1905,9 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q, if (dm_table_supports_dax(t)) blk_queue_flag_set(QUEUE_FLAG_DAX, q); + else + blk_queue_flag_clear(QUEUE_FLAG_DAX, q); + if (dm_table_supports_dax_write_cache(t)) dax_write_cache(t->md->dax_dev, true); diff --git a/drivers/md/dm.c b/drivers/md/dm.c index a3b103e8e3ce..b0dd7027848b 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1056,8 +1056,7 @@ static long dm_dax_direct_access(struct dax_device *dax_dev, pgoff_t pgoff, if (len < 1) goto out; nr_pages = min(len, nr_pages); - if (ti->type->direct_access) - ret = ti->type->direct_access(ti, pgoff, nr_pages, kaddr, pfn); + ret = ti->type->direct_access(ti, pgoff, nr_pages, kaddr, pfn); out: dm_put_live_table(md, srcu_idx); -- cgit v1.2.3 From 2cd5fe22d9a45cdf11c62bbe8db3ce9101207510 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Mon, 25 Jun 2018 21:09:04 -0400 Subject: drm/amdgpu: Make struct amdgpu_atif private to amdgpu_acpi.c Currently, there is nothing in amdgpu that actually uses these structs other than amdgpu_acpi.c. Additionally, since we're about to start saving the correct ACPI handle to use for calling ATIF in this struct this saves us from having to handle making sure that the acpi_handle (and by proxy, the type definition for acpi_handle and all of the other acpi headers) doesn't need to be included within the amdgpu_drv struct itself. This follows the example set by amdgpu_atpx_handler.c. Signed-off-by: Lyude Paul Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 40 ++--------------------- drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 54 ++++++++++++++++++++++++++++++-- 2 files changed, 53 insertions(+), 41 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index a59c07590cee..7df5d3d11aff 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -190,6 +190,7 @@ struct amdgpu_job; struct amdgpu_irq_src; struct amdgpu_fpriv; struct amdgpu_bo_va_mapping; +struct amdgpu_atif; enum amdgpu_cp_irq { AMDGPU_CP_IRQ_GFX_EOP = 0, @@ -1269,43 +1270,6 @@ struct amdgpu_vram_scratch { /* * ACPI */ -struct amdgpu_atif_notification_cfg { - bool enabled; - int command_code; -}; - -struct amdgpu_atif_notifications { - bool display_switch; - bool expansion_mode_change; - bool thermal_state; - bool forced_power_state; - bool system_power_state; - bool display_conf_change; - bool px_gfx_switch; - bool brightness_change; - bool dgpu_display_event; -}; - -struct amdgpu_atif_functions { - bool system_params; - bool sbios_requests; - bool select_active_disp; - bool lid_state; - bool get_tv_standard; - bool set_tv_standard; - bool get_panel_expansion_mode; - bool set_panel_expansion_mode; - bool temperature_change; - bool graphics_device_types; -}; - -struct amdgpu_atif { - struct amdgpu_atif_notifications notifications; - struct amdgpu_atif_functions functions; - struct amdgpu_atif_notification_cfg notification_cfg; - struct amdgpu_encoder *encoder_for_bl; -}; - struct amdgpu_atcs_functions { bool get_ext_state; bool pcie_perf_req; @@ -1466,7 +1430,7 @@ struct amdgpu_device { #if defined(CONFIG_DEBUG_FS) struct dentry *debugfs_regs[AMDGPU_DEBUGFS_MAX_COMPONENTS]; #endif - struct amdgpu_atif atif; + struct amdgpu_atif *atif; struct amdgpu_atcs atcs; struct mutex srbm_mutex; /* GRBM index mutex. Protects concurrent access to GRBM index */ diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c index 8fa850a070e0..22c7e8ec0b9a 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c @@ -34,6 +34,43 @@ #include "amd_acpi.h" #include "atom.h" +struct amdgpu_atif_notification_cfg { + bool enabled; + int command_code; +}; + +struct amdgpu_atif_notifications { + bool display_switch; + bool expansion_mode_change; + bool thermal_state; + bool forced_power_state; + bool system_power_state; + bool display_conf_change; + bool px_gfx_switch; + bool brightness_change; + bool dgpu_display_event; +}; + +struct amdgpu_atif_functions { + bool system_params; + bool sbios_requests; + bool select_active_disp; + bool lid_state; + bool get_tv_standard; + bool set_tv_standard; + bool get_panel_expansion_mode; + bool set_panel_expansion_mode; + bool temperature_change; + bool graphics_device_types; +}; + +struct amdgpu_atif { + struct amdgpu_atif_notifications notifications; + struct amdgpu_atif_functions functions; + struct amdgpu_atif_notification_cfg notification_cfg; + struct amdgpu_encoder *encoder_for_bl; +}; + /* Call the ATIF method */ /** @@ -292,7 +329,7 @@ out: static int amdgpu_atif_handler(struct amdgpu_device *adev, struct acpi_bus_event *event) { - struct amdgpu_atif *atif = &adev->atif; + struct amdgpu_atif *atif = adev->atif; struct atif_sbios_requests req; acpi_handle handle; int count; @@ -303,7 +340,8 @@ static int amdgpu_atif_handler(struct amdgpu_device *adev, if (strcmp(event->device_class, ACPI_VIDEO_CLASS) != 0) return NOTIFY_DONE; - if (!atif->notification_cfg.enabled || + if (!atif || + !atif->notification_cfg.enabled || event->type != atif->notification_cfg.command_code) /* Not our event */ return NOTIFY_DONE; @@ -642,7 +680,7 @@ static int amdgpu_acpi_event(struct notifier_block *nb, int amdgpu_acpi_init(struct amdgpu_device *adev) { acpi_handle handle; - struct amdgpu_atif *atif = &adev->atif; + struct amdgpu_atif *atif; struct amdgpu_atcs *atcs = &adev->atcs; int ret; @@ -659,11 +697,19 @@ int amdgpu_acpi_init(struct amdgpu_device *adev) } /* Call the ATIF method */ + atif = kzalloc(sizeof(*atif), GFP_KERNEL); + if (!atif) { + DRM_WARN("Not enough memory to initialize ATIF\n"); + goto out; + } + ret = amdgpu_atif_verify_interface(handle, atif); if (ret) { DRM_DEBUG_DRIVER("Call to ATIF verify_interface failed: %d\n", ret); + kfree(atif); goto out; } + adev->atif = atif; if (atif->notifications.brightness_change) { struct drm_encoder *tmp; @@ -720,4 +766,6 @@ out: void amdgpu_acpi_fini(struct amdgpu_device *adev) { unregister_acpi_notifier(&adev->acpi_nb); + if (adev->atif) + kfree(adev->atif); } -- cgit v1.2.3 From 4aa5d5eb82bb237d0bb3a38b2a7555054d018081 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Mon, 25 Jun 2018 21:09:06 -0400 Subject: drm/amdgpu: Add amdgpu_atpx_get_dhandle() Since it seems that some vendors are storing the ATIF ACPI methods under the same handle that ATPX lives under instead of the device's own handle, we're going to need to be able to retrieve this handle later so we can probe for ATIF there. Signed-off-by: Lyude Paul Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 6 ++++++ drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c | 6 ++++++ 2 files changed, 12 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index 7df5d3d11aff..7dcbac8af9a7 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -1858,6 +1858,12 @@ static inline bool amdgpu_atpx_dgpu_req_power_for_displays(void) { return false; static inline bool amdgpu_has_atpx(void) { return false; } #endif +#if defined(CONFIG_VGA_SWITCHEROO) && defined(CONFIG_ACPI) +void *amdgpu_atpx_get_dhandle(void); +#else +static inline void *amdgpu_atpx_get_dhandle(void) { return NULL; } +#endif + /* * KMS */ diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c index daa06e7c5bb7..9ab89371d9e8 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c @@ -90,6 +90,12 @@ bool amdgpu_atpx_dgpu_req_power_for_displays(void) { return amdgpu_atpx_priv.atpx.dgpu_req_power_for_displays; } +#if defined(CONFIG_ACPI) +void *amdgpu_atpx_get_dhandle(void) { + return amdgpu_atpx_priv.dhandle; +} +#endif + /** * amdgpu_atpx_call - call an ATPX method * -- cgit v1.2.3 From f9ff68521a5541e1fdaeb0ef11871c035b30e409 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Mon, 25 Jun 2018 21:09:07 -0400 Subject: drm/amdgpu: Dynamically probe for ATIF handle (v2) The other day I was testing one of the HP laptops at my office with an i915/amdgpu hybrid setup and noticed that hotplugging was non-functional on almost all of the display outputs. I eventually discovered that all of the external outputs were connected to the amdgpu device instead of i915, and that the hotplugs weren't being detected so long as the GPU was in runtime suspend. After some talking with folks at AMD, I learned that amdgpu is actually supposed to support hotplug detection in runtime suspend so long as the OEM has implemented it properly in the firmware. On this HP ZBook 15 G4 (the machine in question), amdgpu wasn't managing to find the ATIF handle at all despite the fact that I could see acpi events being sent in response to any hotplugging. After going through dumps of the firmware, I discovered that this machine did in fact support ATIF, but that it's ATIF method lived in an entirely different namespace than this device's handle (the device handle was \_SB_.PCI0.PEG0.PEGP, but ATIF lives in ATPX's handle at \_SB_.PCI0.GFX0). So, fix this by probing ATPX's ACPI parent's namespace if we can't find ATIF elsewhere, along with storing a pointer to the proper handle to use for ATIF and using that instead of the device's handle. This fixes HPD detection while in runtime suspend for this ZBook! v2: Update the comment to reflect how the namespaces are arranged based on the system configuration. (Alex) Signed-off-by: Lyude Paul Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 79 +++++++++++++++++++++++--------- 1 file changed, 58 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c index 22c7e8ec0b9a..0d8c3fc6eace 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c @@ -65,6 +65,8 @@ struct amdgpu_atif_functions { }; struct amdgpu_atif { + acpi_handle handle; + struct amdgpu_atif_notifications notifications; struct amdgpu_atif_functions functions; struct amdgpu_atif_notification_cfg notification_cfg; @@ -83,8 +85,9 @@ struct amdgpu_atif { * Executes the requested ATIF function (all asics). * Returns a pointer to the acpi output buffer. */ -static union acpi_object *amdgpu_atif_call(acpi_handle handle, int function, - struct acpi_buffer *params) +static union acpi_object *amdgpu_atif_call(struct amdgpu_atif *atif, + int function, + struct acpi_buffer *params) { acpi_status status; union acpi_object atif_arg_elements[2]; @@ -107,7 +110,8 @@ static union acpi_object *amdgpu_atif_call(acpi_handle handle, int function, atif_arg_elements[1].integer.value = 0; } - status = acpi_evaluate_object(handle, "ATIF", &atif_arg, &buffer); + status = acpi_evaluate_object(atif->handle, NULL, &atif_arg, + &buffer); /* Fail only if calling the method fails and ATIF is supported */ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { @@ -178,15 +182,14 @@ static void amdgpu_atif_parse_functions(struct amdgpu_atif_functions *f, u32 mas * (all asics). * returns 0 on success, error on failure. */ -static int amdgpu_atif_verify_interface(acpi_handle handle, - struct amdgpu_atif *atif) +static int amdgpu_atif_verify_interface(struct amdgpu_atif *atif) { union acpi_object *info; struct atif_verify_interface output; size_t size; int err = 0; - info = amdgpu_atif_call(handle, ATIF_FUNCTION_VERIFY_INTERFACE, NULL); + info = amdgpu_atif_call(atif, ATIF_FUNCTION_VERIFY_INTERFACE, NULL); if (!info) return -EIO; @@ -213,6 +216,35 @@ out: return err; } +static acpi_handle amdgpu_atif_probe_handle(acpi_handle dhandle) +{ + acpi_handle handle = NULL; + char acpi_method_name[255] = { 0 }; + struct acpi_buffer buffer = { sizeof(acpi_method_name), acpi_method_name }; + acpi_status status; + + /* For PX/HG systems, ATIF and ATPX are in the iGPU's namespace, on dGPU only + * systems, ATIF is in the dGPU's namespace. + */ + status = acpi_get_handle(dhandle, "ATIF", &handle); + if (ACPI_SUCCESS(status)) + goto out; + + if (amdgpu_has_atpx()) { + status = acpi_get_handle(amdgpu_atpx_get_dhandle(), "ATIF", + &handle); + if (ACPI_SUCCESS(status)) + goto out; + } + + DRM_DEBUG_DRIVER("No ATIF handle found\n"); + return NULL; +out: + acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer); + DRM_DEBUG_DRIVER("Found ATIF handle %s\n", acpi_method_name); + return handle; +} + /** * amdgpu_atif_get_notification_params - determine notify configuration * @@ -225,15 +257,16 @@ out: * where n is specified in the result if a notifier is used. * Returns 0 on success, error on failure. */ -static int amdgpu_atif_get_notification_params(acpi_handle handle, - struct amdgpu_atif_notification_cfg *n) +static int amdgpu_atif_get_notification_params(struct amdgpu_atif *atif) { union acpi_object *info; + struct amdgpu_atif_notification_cfg *n = &atif->notification_cfg; struct atif_system_params params; size_t size; int err = 0; - info = amdgpu_atif_call(handle, ATIF_FUNCTION_GET_SYSTEM_PARAMETERS, NULL); + info = amdgpu_atif_call(atif, ATIF_FUNCTION_GET_SYSTEM_PARAMETERS, + NULL); if (!info) { err = -EIO; goto out; @@ -287,14 +320,15 @@ out: * (all asics). * Returns 0 on success, error on failure. */ -static int amdgpu_atif_get_sbios_requests(acpi_handle handle, - struct atif_sbios_requests *req) +static int amdgpu_atif_get_sbios_requests(struct amdgpu_atif *atif, + struct atif_sbios_requests *req) { union acpi_object *info; size_t size; int count = 0; - info = amdgpu_atif_call(handle, ATIF_FUNCTION_GET_SYSTEM_BIOS_REQUESTS, NULL); + info = amdgpu_atif_call(atif, ATIF_FUNCTION_GET_SYSTEM_BIOS_REQUESTS, + NULL); if (!info) return -EIO; @@ -327,11 +361,10 @@ out: * Returns NOTIFY code */ static int amdgpu_atif_handler(struct amdgpu_device *adev, - struct acpi_bus_event *event) + struct acpi_bus_event *event) { struct amdgpu_atif *atif = adev->atif; struct atif_sbios_requests req; - acpi_handle handle; int count; DRM_DEBUG_DRIVER("event, device_class = %s, type = %#x\n", @@ -347,8 +380,7 @@ static int amdgpu_atif_handler(struct amdgpu_device *adev, return NOTIFY_DONE; /* Check pending SBIOS requests */ - handle = ACPI_HANDLE(&adev->pdev->dev); - count = amdgpu_atif_get_sbios_requests(handle, &req); + count = amdgpu_atif_get_sbios_requests(atif, &req); if (count <= 0) return NOTIFY_DONE; @@ -679,7 +711,7 @@ static int amdgpu_acpi_event(struct notifier_block *nb, */ int amdgpu_acpi_init(struct amdgpu_device *adev) { - acpi_handle handle; + acpi_handle handle, atif_handle; struct amdgpu_atif *atif; struct amdgpu_atcs *atcs = &adev->atcs; int ret; @@ -696,14 +728,20 @@ int amdgpu_acpi_init(struct amdgpu_device *adev) DRM_DEBUG_DRIVER("Call to ATCS verify_interface failed: %d\n", ret); } - /* Call the ATIF method */ + /* Probe for ATIF, and initialize it if found */ + atif_handle = amdgpu_atif_probe_handle(handle); + if (!atif_handle) + goto out; + atif = kzalloc(sizeof(*atif), GFP_KERNEL); if (!atif) { DRM_WARN("Not enough memory to initialize ATIF\n"); goto out; } + atif->handle = atif_handle; - ret = amdgpu_atif_verify_interface(handle, atif); + /* Call the ATIF method */ + ret = amdgpu_atif_verify_interface(atif); if (ret) { DRM_DEBUG_DRIVER("Call to ATIF verify_interface failed: %d\n", ret); kfree(atif); @@ -739,8 +777,7 @@ int amdgpu_acpi_init(struct amdgpu_device *adev) } if (atif->functions.system_params) { - ret = amdgpu_atif_get_notification_params(handle, - &atif->notification_cfg); + ret = amdgpu_atif_get_notification_params(atif); if (ret) { DRM_DEBUG_DRIVER("Call to GET_SYSTEM_PARAMS failed: %d\n", ret); -- cgit v1.2.3 From 63ba82c0e63f1dd400d84e12f2142c2cb691aec1 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 28 Jun 2018 22:21:24 +0200 Subject: parisc: Reduce debug output in unwind code Signed-off-by: Helge Deller --- arch/parisc/kernel/unwind.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c index 143f90e2f9f3..2ef83d78eec4 100644 --- a/arch/parisc/kernel/unwind.c +++ b/arch/parisc/kernel/unwind.c @@ -25,7 +25,7 @@ /* #define DEBUG 1 */ #ifdef DEBUG -#define dbg(x...) printk(x) +#define dbg(x...) pr_debug(x) #else #define dbg(x...) #endif @@ -182,7 +182,7 @@ int __init unwind_init(void) start = (long)&__start___unwind[0]; stop = (long)&__stop___unwind[0]; - printk("unwind_init: start = 0x%lx, end = 0x%lx, entries = %lu\n", + dbg("unwind_init: start = 0x%lx, end = 0x%lx, entries = %lu\n", start, stop, (stop - start) / sizeof(struct unwind_table_entry)); -- cgit v1.2.3 From b63e132b6433a41cf311e8bc382d33fd2b73b505 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 22 Jun 2018 10:55:46 -0700 Subject: MIPS: Use async IPIs for arch_trigger_cpumask_backtrace() The current MIPS implementation of arch_trigger_cpumask_backtrace() is broken because it attempts to use synchronous IPIs despite the fact that it may be run with interrupts disabled. This means that when arch_trigger_cpumask_backtrace() is invoked, for example by the RCU CPU stall watchdog, we may: - Deadlock due to use of synchronous IPIs with interrupts disabled, causing the CPU that's attempting to generate the backtrace output to hang itself. - Not succeed in generating the desired output from remote CPUs. - Produce warnings about this from smp_call_function_many(), for example: [42760.526910] INFO: rcu_sched detected stalls on CPUs/tasks: [42760.535755] 0-...!: (1 GPs behind) idle=ade/140000000000000/0 softirq=526944/526945 fqs=0 [42760.547874] 1-...!: (0 ticks this GP) idle=e4a/140000000000000/0 softirq=547885/547885 fqs=0 [42760.559869] (detected by 2, t=2162 jiffies, g=266689, c=266688, q=33) [42760.568927] ------------[ cut here ]------------ [42760.576146] WARNING: CPU: 2 PID: 1216 at kernel/smp.c:416 smp_call_function_many+0x88/0x20c [42760.587839] Modules linked in: [42760.593152] CPU: 2 PID: 1216 Comm: sh Not tainted 4.15.4-00373-gee058bb4d0c2 #2 [42760.603767] Stack : 8e09bd20 8e09bd20 8e09bd20 fffffff0 00000007 00000006 00000000 8e09bca8 [42760.616937] 95b2b379 95b2b379 807a0080 00000007 81944518 0000018a 00000032 00000000 [42760.630095] 00000000 00000030 80000000 00000000 806eca74 00000009 8017e2b8 000001a0 [42760.643169] 00000000 00000002 00000000 8e09baa4 00000008 808b8008 86d69080 8e09bca0 [42760.656282] 8e09ad50 805e20aa 00000000 00000000 00000000 8017e2b8 00000009 801070ca [42760.669424] ... [42760.673919] Call Trace: [42760.678672] [<27fde568>] show_stack+0x70/0xf0 [42760.685417] [<84751641>] dump_stack+0xaa/0xd0 [42760.692188] [<699d671c>] __warn+0x80/0x92 [42760.698549] [<68915d41>] warn_slowpath_null+0x28/0x36 [42760.705912] [] smp_call_function_many+0x88/0x20c [42760.713696] [<6bbdfc2a>] arch_trigger_cpumask_backtrace+0x30/0x4a [42760.722216] [] rcu_dump_cpu_stacks+0x6a/0x98 [42760.729580] [<796e7629>] rcu_check_callbacks+0x672/0x6ac [42760.737476] [<059b3b43>] update_process_times+0x18/0x34 [42760.744981] [<6eb94941>] tick_sched_handle.isra.5+0x26/0x38 [42760.752793] [<478d3d70>] tick_sched_timer+0x1c/0x50 [42760.759882] [] __hrtimer_run_queues+0xc6/0x226 [42760.767418] [] hrtimer_interrupt+0x88/0x19a [42760.775031] [<6765a19e>] gic_compare_interrupt+0x2e/0x3a [42760.782761] [<0558bf5f>] handle_percpu_devid_irq+0x78/0x168 [42760.790795] [<90c11ba2>] generic_handle_irq+0x1e/0x2c [42760.798117] [<1b6d462c>] gic_handle_local_int+0x38/0x86 [42760.805545] [] gic_irq_dispatch+0xa/0x14 [42760.812534] [<90c11ba2>] generic_handle_irq+0x1e/0x2c [42760.820086] [] do_IRQ+0x16/0x20 [42760.826274] [<9aef3ce6>] plat_irq_dispatch+0x62/0x94 [42760.833458] [<6a94b53c>] except_vec_vi_end+0x70/0x78 [42760.840655] [<22284043>] smp_call_function_many+0x1ba/0x20c [42760.848501] [<54022b58>] smp_call_function+0x1e/0x2c [42760.855693] [] flush_tlb_mm+0x2a/0x98 [42760.862730] [<0844cdd0>] tlb_flush_mmu+0x1c/0x44 [42760.869628] [] arch_tlb_finish_mmu+0x26/0x3e [42760.877021] [<1aeaaf74>] tlb_finish_mmu+0x18/0x66 [42760.883907] [] exit_mmap+0x76/0xea [42760.890428] [] mmput+0x80/0x11a [42760.896632] [] do_exit+0x1f4/0x80c [42760.903158] [] do_group_exit+0x20/0x7e [42760.909990] [<13fa8d54>] __wake_up_parent+0x0/0x1e [42760.917045] [<46cf89d0>] smp_call_function_many+0x1a2/0x20c [42760.924893] [<8c21a93b>] syscall_common+0x14/0x1c [42760.931765] ---[ end trace 02aa09da9dc52a60 ]--- [42760.938342] ------------[ cut here ]------------ [42760.945311] WARNING: CPU: 2 PID: 1216 at kernel/smp.c:291 smp_call_function_single+0xee/0xf8 ... This patch switches MIPS' arch_trigger_cpumask_backtrace() to use async IPIs & smp_call_function_single_async() in order to resolve this problem. We ensure use of the pre-allocated call_single_data_t structures is serialized by maintaining a cpumask indicating that they're busy, and refusing to attempt to send an IPI when a CPU's bit is set in this mask. This should only happen if a CPU hasn't responded to a previous backtrace IPI - ie. if it's hung - and we print a warning to the console in this case. I've marked this for stable branches as far back as v4.9, to which it applies cleanly. Strictly speaking the faulty MIPS implementation can be traced further back to commit 856839b76836 ("MIPS: Add arch_trigger_all_cpu_backtrace() function") in v3.19, but kernel versions v3.19 through v4.8 will require further work to backport due to the rework performed in commit 9a01c3ed5cdb ("nmi_backtrace: add more trigger_*_cpu_backtrace() methods"). Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/19597/ Cc: James Hogan Cc: Ralf Baechle Cc: Huacai Chen Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.9+ Fixes: 856839b76836 ("MIPS: Add arch_trigger_all_cpu_backtrace() function") Fixes: 9a01c3ed5cdb ("nmi_backtrace: add more trigger_*_cpu_backtrace() methods") --- arch/mips/kernel/process.c | 45 ++++++++++++++++++++++++++++++--------------- 1 file changed, 30 insertions(+), 15 deletions(-) diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index d4cfeb931382..9670e70139fd 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -655,28 +656,42 @@ unsigned long arch_align_stack(unsigned long sp) return sp & ALMASK; } -static void arch_dump_stack(void *info) -{ - struct pt_regs *regs; +static DEFINE_PER_CPU(call_single_data_t, backtrace_csd); +static struct cpumask backtrace_csd_busy; - regs = get_irq_regs(); - - if (regs) - show_regs(regs); - else - dump_stack(); +static void handle_backtrace(void *info) +{ + nmi_cpu_backtrace(get_irq_regs()); + cpumask_clear_cpu(smp_processor_id(), &backtrace_csd_busy); } -void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self) +static void raise_backtrace(cpumask_t *mask) { - long this_cpu = get_cpu(); + call_single_data_t *csd; + int cpu; - if (cpumask_test_cpu(this_cpu, mask) && !exclude_self) - dump_stack(); + for_each_cpu(cpu, mask) { + /* + * If we previously sent an IPI to the target CPU & it hasn't + * cleared its bit in the busy cpumask then it didn't handle + * our previous IPI & it's not safe for us to reuse the + * call_single_data_t. + */ + if (cpumask_test_and_set_cpu(cpu, &backtrace_csd_busy)) { + pr_warn("Unable to send backtrace IPI to CPU%u - perhaps it hung?\n", + cpu); + continue; + } - smp_call_function_many(mask, arch_dump_stack, NULL, 1); + csd = &per_cpu(backtrace_csd, cpu); + csd->func = handle_backtrace; + smp_call_function_single_async(cpu, csd); + } +} - put_cpu(); +void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self) +{ + nmi_trigger_cpumask_backtrace(mask, exclude_self, raise_backtrace); } int mips_get_process_fp_mode(struct task_struct *task) -- cgit v1.2.3 From 3203c9010060806ff88c9989aeab4dc8d9a474dc Mon Sep 17 00:00:00 2001 From: Kleber Sacilotto de Souza Date: Wed, 27 Jun 2018 17:19:21 +0200 Subject: test_bpf: flag tests that cannot be jited on s390 Flag with FLAG_EXPECTED_FAIL the BPF_MAXINSNS tests that cannot be jited on s390 because they exceed BPF_SIZE_MAX and fail when CONFIG_BPF_JIT_ALWAYS_ON is set. Also set .expected_errcode to -ENOTSUPP so the tests pass in that case. Signed-off-by: Kleber Sacilotto de Souza Acked-by: Song Liu Signed-off-by: Daniel Borkmann --- lib/test_bpf.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/lib/test_bpf.c b/lib/test_bpf.c index 60aedc879361..08d3d59dca17 100644 --- a/lib/test_bpf.c +++ b/lib/test_bpf.c @@ -5282,21 +5282,31 @@ static struct bpf_test tests[] = { { /* Mainly checking JIT here. */ "BPF_MAXINSNS: Ctx heavy transformations", { }, +#if defined(CONFIG_BPF_JIT_ALWAYS_ON) && defined(CONFIG_S390) + CLASSIC | FLAG_EXPECTED_FAIL, +#else CLASSIC, +#endif { }, { { 1, !!(SKB_VLAN_TCI & VLAN_TAG_PRESENT) }, { 10, !!(SKB_VLAN_TCI & VLAN_TAG_PRESENT) } }, .fill_helper = bpf_fill_maxinsns6, + .expected_errcode = -ENOTSUPP, }, { /* Mainly checking JIT here. */ "BPF_MAXINSNS: Call heavy transformations", { }, +#if defined(CONFIG_BPF_JIT_ALWAYS_ON) && defined(CONFIG_S390) + CLASSIC | FLAG_NO_DATA | FLAG_EXPECTED_FAIL, +#else CLASSIC | FLAG_NO_DATA, +#endif { }, { { 1, 0 }, { 10, 0 } }, .fill_helper = bpf_fill_maxinsns7, + .expected_errcode = -ENOTSUPP, }, { /* Mainly checking JIT here. */ "BPF_MAXINSNS: Jump heavy test", @@ -5347,18 +5357,28 @@ static struct bpf_test tests[] = { { "BPF_MAXINSNS: exec all MSH", { }, +#if defined(CONFIG_BPF_JIT_ALWAYS_ON) && defined(CONFIG_S390) + CLASSIC | FLAG_EXPECTED_FAIL, +#else CLASSIC, +#endif { 0xfa, 0xfb, 0xfc, 0xfd, }, { { 4, 0xababab83 } }, .fill_helper = bpf_fill_maxinsns13, + .expected_errcode = -ENOTSUPP, }, { "BPF_MAXINSNS: ld_abs+get_processor_id", { }, +#if defined(CONFIG_BPF_JIT_ALWAYS_ON) && defined(CONFIG_S390) + CLASSIC | FLAG_EXPECTED_FAIL, +#else CLASSIC, +#endif { }, { { 1, 0xbee } }, .fill_helper = bpf_fill_ld_abs_get_processor_id, + .expected_errcode = -ENOTSUPP, }, /* * LD_IND / LD_ABS on fragmented SKBs -- cgit v1.2.3 From 4c79579b44b1876444f4d04de31c1a37098a0350 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 26 Jun 2018 16:21:18 -0700 Subject: bpf: Change bpf_fib_lookup to return lookup status For ACLs implemented using either FIB rules or FIB entries, the BPF program needs the FIB lookup status to be able to drop the packet. Since the bpf_fib_lookup API has not reached a released kernel yet, change the return code to contain an encoding of the FIB lookup result and return the nexthop device index in the params struct. In addition, inform the BPF program of any post FIB lookup reason as to why the packet needs to go up the stack. The fib result for unicast routes must have an egress device, so remove the check that it is non-NULL. Signed-off-by: David Ahern Signed-off-by: Daniel Borkmann --- include/uapi/linux/bpf.h | 28 ++++++++++++--- net/core/filter.c | 86 +++++++++++++++++++++++++++++----------------- samples/bpf/xdp_fwd_kern.c | 8 ++--- 3 files changed, 81 insertions(+), 41 deletions(-) diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 59b19b6a40d7..b7db3261c62d 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1857,7 +1857,8 @@ union bpf_attr { * is resolved), the nexthop address is returned in ipv4_dst * or ipv6_dst based on family, smac is set to mac address of * egress device, dmac is set to nexthop mac address, rt_metric - * is set to metric from route (IPv4/IPv6 only). + * is set to metric from route (IPv4/IPv6 only), and ifindex + * is set to the device index of the nexthop from the FIB lookup. * * *plen* argument is the size of the passed in struct. * *flags* argument can be a combination of one or more of the @@ -1873,9 +1874,10 @@ union bpf_attr { * *ctx* is either **struct xdp_md** for XDP programs or * **struct sk_buff** tc cls_act programs. * Return - * Egress device index on success, 0 if packet needs to continue - * up the stack for further processing or a negative error in case - * of failure. + * * < 0 if any input argument is invalid + * * 0 on success (packet is forwarded, nexthop neighbor exists) + * * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the + * * packet is not forwarded or needs assist from full stack * * int bpf_sock_hash_update(struct bpf_sock_ops_kern *skops, struct bpf_map *map, void *key, u64 flags) * Description @@ -2612,6 +2614,18 @@ struct bpf_raw_tracepoint_args { #define BPF_FIB_LOOKUP_DIRECT BIT(0) #define BPF_FIB_LOOKUP_OUTPUT BIT(1) +enum { + BPF_FIB_LKUP_RET_SUCCESS, /* lookup successful */ + BPF_FIB_LKUP_RET_BLACKHOLE, /* dest is blackholed; can be dropped */ + BPF_FIB_LKUP_RET_UNREACHABLE, /* dest is unreachable; can be dropped */ + BPF_FIB_LKUP_RET_PROHIBIT, /* dest not allowed; can be dropped */ + BPF_FIB_LKUP_RET_NOT_FWDED, /* packet is not forwarded */ + BPF_FIB_LKUP_RET_FWD_DISABLED, /* fwding is not enabled on ingress */ + BPF_FIB_LKUP_RET_UNSUPP_LWT, /* fwd requires encapsulation */ + BPF_FIB_LKUP_RET_NO_NEIGH, /* no neighbor entry for nh */ + BPF_FIB_LKUP_RET_FRAG_NEEDED, /* fragmentation required to fwd */ +}; + struct bpf_fib_lookup { /* input: network family for lookup (AF_INET, AF_INET6) * output: network family of egress nexthop @@ -2625,7 +2639,11 @@ struct bpf_fib_lookup { /* total length of packet from network header - used for MTU check */ __u16 tot_len; - __u32 ifindex; /* L3 device index for lookup */ + + /* input: L3 device index for lookup + * output: device index from FIB lookup + */ + __u32 ifindex; union { /* inputs to lookup */ diff --git a/net/core/filter.c b/net/core/filter.c index e7f12e9f598c..0ca6907d7efe 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -4073,8 +4073,9 @@ static int bpf_fib_set_fwd_params(struct bpf_fib_lookup *params, memcpy(params->smac, dev->dev_addr, ETH_ALEN); params->h_vlan_TCI = 0; params->h_vlan_proto = 0; + params->ifindex = dev->ifindex; - return dev->ifindex; + return 0; } #endif @@ -4098,7 +4099,7 @@ static int bpf_ipv4_fib_lookup(struct net *net, struct bpf_fib_lookup *params, /* verify forwarding is enabled on this interface */ in_dev = __in_dev_get_rcu(dev); if (unlikely(!in_dev || !IN_DEV_FORWARD(in_dev))) - return 0; + return BPF_FIB_LKUP_RET_FWD_DISABLED; if (flags & BPF_FIB_LOOKUP_OUTPUT) { fl4.flowi4_iif = 1; @@ -4123,7 +4124,7 @@ static int bpf_ipv4_fib_lookup(struct net *net, struct bpf_fib_lookup *params, tb = fib_get_table(net, tbid); if (unlikely(!tb)) - return 0; + return BPF_FIB_LKUP_RET_NOT_FWDED; err = fib_table_lookup(tb, &fl4, &res, FIB_LOOKUP_NOREF); } else { @@ -4135,8 +4136,20 @@ static int bpf_ipv4_fib_lookup(struct net *net, struct bpf_fib_lookup *params, err = fib_lookup(net, &fl4, &res, FIB_LOOKUP_NOREF); } - if (err || res.type != RTN_UNICAST) - return 0; + if (err) { + /* map fib lookup errors to RTN_ type */ + if (err == -EINVAL) + return BPF_FIB_LKUP_RET_BLACKHOLE; + if (err == -EHOSTUNREACH) + return BPF_FIB_LKUP_RET_UNREACHABLE; + if (err == -EACCES) + return BPF_FIB_LKUP_RET_PROHIBIT; + + return BPF_FIB_LKUP_RET_NOT_FWDED; + } + + if (res.type != RTN_UNICAST) + return BPF_FIB_LKUP_RET_NOT_FWDED; if (res.fi->fib_nhs > 1) fib_select_path(net, &res, &fl4, NULL); @@ -4144,19 +4157,16 @@ static int bpf_ipv4_fib_lookup(struct net *net, struct bpf_fib_lookup *params, if (check_mtu) { mtu = ip_mtu_from_fib_result(&res, params->ipv4_dst); if (params->tot_len > mtu) - return 0; + return BPF_FIB_LKUP_RET_FRAG_NEEDED; } nh = &res.fi->fib_nh[res.nh_sel]; /* do not handle lwt encaps right now */ if (nh->nh_lwtstate) - return 0; + return BPF_FIB_LKUP_RET_UNSUPP_LWT; dev = nh->nh_dev; - if (unlikely(!dev)) - return 0; - if (nh->nh_gw) params->ipv4_dst = nh->nh_gw; @@ -4166,10 +4176,10 @@ static int bpf_ipv4_fib_lookup(struct net *net, struct bpf_fib_lookup *params, * rcu_read_lock_bh is not needed here */ neigh = __ipv4_neigh_lookup_noref(dev, (__force u32)params->ipv4_dst); - if (neigh) - return bpf_fib_set_fwd_params(params, neigh, dev); + if (!neigh) + return BPF_FIB_LKUP_RET_NO_NEIGH; - return 0; + return bpf_fib_set_fwd_params(params, neigh, dev); } #endif @@ -4190,7 +4200,7 @@ static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params, /* link local addresses are never forwarded */ if (rt6_need_strict(dst) || rt6_need_strict(src)) - return 0; + return BPF_FIB_LKUP_RET_NOT_FWDED; dev = dev_get_by_index_rcu(net, params->ifindex); if (unlikely(!dev)) @@ -4198,7 +4208,7 @@ static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params, idev = __in6_dev_get_safely(dev); if (unlikely(!idev || !net->ipv6.devconf_all->forwarding)) - return 0; + return BPF_FIB_LKUP_RET_FWD_DISABLED; if (flags & BPF_FIB_LOOKUP_OUTPUT) { fl6.flowi6_iif = 1; @@ -4225,7 +4235,7 @@ static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params, tb = ipv6_stub->fib6_get_table(net, tbid); if (unlikely(!tb)) - return 0; + return BPF_FIB_LKUP_RET_NOT_FWDED; f6i = ipv6_stub->fib6_table_lookup(net, tb, oif, &fl6, strict); } else { @@ -4238,11 +4248,23 @@ static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params, } if (unlikely(IS_ERR_OR_NULL(f6i) || f6i == net->ipv6.fib6_null_entry)) - return 0; + return BPF_FIB_LKUP_RET_NOT_FWDED; + + if (unlikely(f6i->fib6_flags & RTF_REJECT)) { + switch (f6i->fib6_type) { + case RTN_BLACKHOLE: + return BPF_FIB_LKUP_RET_BLACKHOLE; + case RTN_UNREACHABLE: + return BPF_FIB_LKUP_RET_UNREACHABLE; + case RTN_PROHIBIT: + return BPF_FIB_LKUP_RET_PROHIBIT; + default: + return BPF_FIB_LKUP_RET_NOT_FWDED; + } + } - if (unlikely(f6i->fib6_flags & RTF_REJECT || - f6i->fib6_type != RTN_UNICAST)) - return 0; + if (f6i->fib6_type != RTN_UNICAST) + return BPF_FIB_LKUP_RET_NOT_FWDED; if (f6i->fib6_nsiblings && fl6.flowi6_oif == 0) f6i = ipv6_stub->fib6_multipath_select(net, f6i, &fl6, @@ -4252,11 +4274,11 @@ static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params, if (check_mtu) { mtu = ipv6_stub->ip6_mtu_from_fib6(f6i, dst, src); if (params->tot_len > mtu) - return 0; + return BPF_FIB_LKUP_RET_FRAG_NEEDED; } if (f6i->fib6_nh.nh_lwtstate) - return 0; + return BPF_FIB_LKUP_RET_UNSUPP_LWT; if (f6i->fib6_flags & RTF_GATEWAY) *dst = f6i->fib6_nh.nh_gw; @@ -4270,10 +4292,10 @@ static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params, */ neigh = ___neigh_lookup_noref(ipv6_stub->nd_tbl, neigh_key_eq128, ndisc_hashfn, dst, dev); - if (neigh) - return bpf_fib_set_fwd_params(params, neigh, dev); + if (!neigh) + return BPF_FIB_LKUP_RET_NO_NEIGH; - return 0; + return bpf_fib_set_fwd_params(params, neigh, dev); } #endif @@ -4315,7 +4337,7 @@ BPF_CALL_4(bpf_skb_fib_lookup, struct sk_buff *, skb, struct bpf_fib_lookup *, params, int, plen, u32, flags) { struct net *net = dev_net(skb->dev); - int index = -EAFNOSUPPORT; + int rc = -EAFNOSUPPORT; if (plen < sizeof(*params)) return -EINVAL; @@ -4326,25 +4348,25 @@ BPF_CALL_4(bpf_skb_fib_lookup, struct sk_buff *, skb, switch (params->family) { #if IS_ENABLED(CONFIG_INET) case AF_INET: - index = bpf_ipv4_fib_lookup(net, params, flags, false); + rc = bpf_ipv4_fib_lookup(net, params, flags, false); break; #endif #if IS_ENABLED(CONFIG_IPV6) case AF_INET6: - index = bpf_ipv6_fib_lookup(net, params, flags, false); + rc = bpf_ipv6_fib_lookup(net, params, flags, false); break; #endif } - if (index > 0) { + if (!rc) { struct net_device *dev; - dev = dev_get_by_index_rcu(net, index); + dev = dev_get_by_index_rcu(net, params->ifindex); if (!is_skb_forwardable(dev, skb)) - index = 0; + rc = BPF_FIB_LKUP_RET_FRAG_NEEDED; } - return index; + return rc; } static const struct bpf_func_proto bpf_skb_fib_lookup_proto = { diff --git a/samples/bpf/xdp_fwd_kern.c b/samples/bpf/xdp_fwd_kern.c index 6673cdb9f55c..a7e94e7ff87d 100644 --- a/samples/bpf/xdp_fwd_kern.c +++ b/samples/bpf/xdp_fwd_kern.c @@ -48,9 +48,9 @@ static __always_inline int xdp_fwd_flags(struct xdp_md *ctx, u32 flags) struct ethhdr *eth = data; struct ipv6hdr *ip6h; struct iphdr *iph; - int out_index; u16 h_proto; u64 nh_off; + int rc; nh_off = sizeof(*eth); if (data + nh_off > data_end) @@ -101,7 +101,7 @@ static __always_inline int xdp_fwd_flags(struct xdp_md *ctx, u32 flags) fib_params.ifindex = ctx->ingress_ifindex; - out_index = bpf_fib_lookup(ctx, &fib_params, sizeof(fib_params), flags); + rc = bpf_fib_lookup(ctx, &fib_params, sizeof(fib_params), flags); /* verify egress index has xdp support * TO-DO bpf_map_lookup_elem(&tx_port, &key) fails with @@ -109,7 +109,7 @@ static __always_inline int xdp_fwd_flags(struct xdp_md *ctx, u32 flags) * NOTE: without verification that egress index supports XDP * forwarding packets are dropped. */ - if (out_index > 0) { + if (rc == 0) { if (h_proto == htons(ETH_P_IP)) ip_decrease_ttl(iph); else if (h_proto == htons(ETH_P_IPV6)) @@ -117,7 +117,7 @@ static __always_inline int xdp_fwd_flags(struct xdp_md *ctx, u32 flags) memcpy(eth->h_dest, fib_params.dmac, ETH_ALEN); memcpy(eth->h_source, fib_params.smac, ETH_ALEN); - return bpf_redirect_map(&tx_port, out_index, 0); + return bpf_redirect_map(&tx_port, fib_params.ifindex, 0); } return XDP_PASS; -- cgit v1.2.3 From 0da74120c5341389b97c4ee27487a97224999ee1 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Thu, 28 Jun 2018 20:39:54 -0400 Subject: selinux: move user accesses in selinuxfs out of locked regions If a user is accessing a file in selinuxfs with a pointer to a userspace buffer that is backed by e.g. a userfaultfd, the userspace access can stall indefinitely, which can block fsi->mutex if it is held. For sel_read_policy(), remove the locking, since this method doesn't seem to access anything that requires locking. For sel_read_bool(), move the user access below the locked region. For sel_write_bool() and sel_commit_bools_write(), move the user access up above the locked region. Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jann Horn Acked-by: Stephen Smalley [PM: removed an unused variable in sel_read_policy()] Signed-off-by: Paul Moore --- security/selinux/selinuxfs.c | 78 +++++++++++++++++++------------------------- 1 file changed, 33 insertions(+), 45 deletions(-) diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c index c0cadbc5f85c..19e35dd695d7 100644 --- a/security/selinux/selinuxfs.c +++ b/security/selinux/selinuxfs.c @@ -441,22 +441,16 @@ static int sel_release_policy(struct inode *inode, struct file *filp) static ssize_t sel_read_policy(struct file *filp, char __user *buf, size_t count, loff_t *ppos) { - struct selinux_fs_info *fsi = file_inode(filp)->i_sb->s_fs_info; struct policy_load_memory *plm = filp->private_data; int ret; - mutex_lock(&fsi->mutex); - ret = avc_has_perm(&selinux_state, current_sid(), SECINITSID_SECURITY, SECCLASS_SECURITY, SECURITY__READ_POLICY, NULL); if (ret) - goto out; + return ret; - ret = simple_read_from_buffer(buf, count, ppos, plm->data, plm->len); -out: - mutex_unlock(&fsi->mutex); - return ret; + return simple_read_from_buffer(buf, count, ppos, plm->data, plm->len); } static vm_fault_t sel_mmap_policy_fault(struct vm_fault *vmf) @@ -1188,25 +1182,29 @@ static ssize_t sel_read_bool(struct file *filep, char __user *buf, ret = -EINVAL; if (index >= fsi->bool_num || strcmp(name, fsi->bool_pending_names[index])) - goto out; + goto out_unlock; ret = -ENOMEM; page = (char *)get_zeroed_page(GFP_KERNEL); if (!page) - goto out; + goto out_unlock; cur_enforcing = security_get_bool_value(fsi->state, index); if (cur_enforcing < 0) { ret = cur_enforcing; - goto out; + goto out_unlock; } length = scnprintf(page, PAGE_SIZE, "%d %d", cur_enforcing, fsi->bool_pending_values[index]); - ret = simple_read_from_buffer(buf, count, ppos, page, length); -out: mutex_unlock(&fsi->mutex); + ret = simple_read_from_buffer(buf, count, ppos, page, length); +out_free: free_page((unsigned long)page); return ret; + +out_unlock: + mutex_unlock(&fsi->mutex); + goto out_free; } static ssize_t sel_write_bool(struct file *filep, const char __user *buf, @@ -1219,6 +1217,17 @@ static ssize_t sel_write_bool(struct file *filep, const char __user *buf, unsigned index = file_inode(filep)->i_ino & SEL_INO_MASK; const char *name = filep->f_path.dentry->d_name.name; + if (count >= PAGE_SIZE) + return -ENOMEM; + + /* No partial writes. */ + if (*ppos != 0) + return -EINVAL; + + page = memdup_user_nul(buf, count); + if (IS_ERR(page)) + return PTR_ERR(page); + mutex_lock(&fsi->mutex); length = avc_has_perm(&selinux_state, @@ -1233,22 +1242,6 @@ static ssize_t sel_write_bool(struct file *filep, const char __user *buf, fsi->bool_pending_names[index])) goto out; - length = -ENOMEM; - if (count >= PAGE_SIZE) - goto out; - - /* No partial writes. */ - length = -EINVAL; - if (*ppos != 0) - goto out; - - page = memdup_user_nul(buf, count); - if (IS_ERR(page)) { - length = PTR_ERR(page); - page = NULL; - goto out; - } - length = -EINVAL; if (sscanf(page, "%d", &new_value) != 1) goto out; @@ -1280,6 +1273,17 @@ static ssize_t sel_commit_bools_write(struct file *filep, ssize_t length; int new_value; + if (count >= PAGE_SIZE) + return -ENOMEM; + + /* No partial writes. */ + if (*ppos != 0) + return -EINVAL; + + page = memdup_user_nul(buf, count); + if (IS_ERR(page)) + return PTR_ERR(page); + mutex_lock(&fsi->mutex); length = avc_has_perm(&selinux_state, @@ -1289,22 +1293,6 @@ static ssize_t sel_commit_bools_write(struct file *filep, if (length) goto out; - length = -ENOMEM; - if (count >= PAGE_SIZE) - goto out; - - /* No partial writes. */ - length = -EINVAL; - if (*ppos != 0) - goto out; - - page = memdup_user_nul(buf, count); - if (IS_ERR(page)) { - length = PTR_ERR(page); - page = NULL; - goto out; - } - length = -EINVAL; if (sscanf(page, "%d", &new_value) != 1) goto out; -- cgit v1.2.3 From b62cc6fdd793eaac50e4191c8637ffff9e9574d6 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 18 Jun 2018 10:07:35 -0700 Subject: libnvdimm, pmem: Fix memcpy_mcsafe() return code handling in nsio_rw_bytes() Commit 60622d68227d "x86/asm/memcpy_mcsafe: Return bytes remaining" converted callers of memcpy_mcsafe() to expect a positive 'bytes remaining' value rather than a negative error code. The nsio_rw_bytes() conversion failed to return success. The failure is benign in that nsio_rw_bytes() will end up writing back what it just read. Fixes: 60622d68227d ("x86/asm/memcpy_mcsafe: Return bytes remaining") Cc: Dan Williams Reviewed-by: Vishal Verma Signed-off-by: Dan Williams --- drivers/nvdimm/claim.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/nvdimm/claim.c b/drivers/nvdimm/claim.c index 2e96b34bc936..fb667bf469c7 100644 --- a/drivers/nvdimm/claim.c +++ b/drivers/nvdimm/claim.c @@ -278,6 +278,7 @@ static int nsio_rw_bytes(struct nd_namespace_common *ndns, return -EIO; if (memcpy_mcsafe(buf, nsio->addr + offset, size) != 0) return -EIO; + return 0; } if (unlikely(is_bad_pmem(&nsio->bb, sector, sz_align))) { -- cgit v1.2.3 From 5a14e91d559aee5bdb0e002e1153fd9c4338a29e Mon Sep 17 00:00:00 2001 From: Jeff Moyer Date: Wed, 27 Jun 2018 11:43:58 -0400 Subject: dev-dax: check_vma: ratelimit dev_info-s This is easily triggered from userspace, so let's ratelimit the messages. Signed-off-by: Jeff Moyer Signed-off-by: Dan Williams --- drivers/dax/device.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/dax/device.c b/drivers/dax/device.c index de2f8297a210..108c37fca782 100644 --- a/drivers/dax/device.c +++ b/drivers/dax/device.c @@ -189,14 +189,16 @@ static int check_vma(struct dev_dax *dev_dax, struct vm_area_struct *vma, /* prevent private mappings from being established */ if ((vma->vm_flags & VM_MAYSHARE) != VM_MAYSHARE) { - dev_info(dev, "%s: %s: fail, attempted private mapping\n", + dev_info_ratelimited(dev, + "%s: %s: fail, attempted private mapping\n", current->comm, func); return -EINVAL; } mask = dax_region->align - 1; if (vma->vm_start & mask || vma->vm_end & mask) { - dev_info(dev, "%s: %s: fail, unaligned vma (%#lx - %#lx, %#lx)\n", + dev_info_ratelimited(dev, + "%s: %s: fail, unaligned vma (%#lx - %#lx, %#lx)\n", current->comm, func, vma->vm_start, vma->vm_end, mask); return -EINVAL; @@ -204,13 +206,15 @@ static int check_vma(struct dev_dax *dev_dax, struct vm_area_struct *vma, if ((dax_region->pfn_flags & (PFN_DEV|PFN_MAP)) == PFN_DEV && (vma->vm_flags & VM_DONTCOPY) == 0) { - dev_info(dev, "%s: %s: fail, dax range requires MADV_DONTFORK\n", + dev_info_ratelimited(dev, + "%s: %s: fail, dax range requires MADV_DONTFORK\n", current->comm, func); return -EINVAL; } if (!vma_is_dax(vma)) { - dev_info(dev, "%s: %s: fail, vma is not DAX capable\n", + dev_info_ratelimited(dev, + "%s: %s: fail, vma is not DAX capable\n", current->comm, func); return -EINVAL; } -- cgit v1.2.3 From 2a2c8ee2d72c4f1ba0f7fbb02dc74f971df0f934 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 16 Jun 2018 22:37:56 +0900 Subject: Revert "i2c: algo-bit: init the bus to a known state" This reverts commit 3e5f06bed72fe72166a6778f630241a893f67799. As per bugzilla #200045, this caused a regression. I don't really see a way to fix it without having the hardware. So, revert the patch and I will fix the issue I was seeing originally in the i2c-gpio driver itself. I couldn't find new users of this algorithm since, so there should be no one depending on the new behaviour. Reported-by: Sergey Larin Fixes: 3e5f06bed72f ("i2c: algo-bit: init the bus to a known state") Signed-off-by: Wolfram Sang Acked-by: Alex Deucher Tested-by: Sergey Larin Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/algos/i2c-algo-bit.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 4a34f311e1ff..0c0eb16d710f 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -647,11 +647,6 @@ static int __i2c_bit_add_bus(struct i2c_adapter *adap, if (bit_adap->getscl == NULL) adap->quirks = &i2c_bit_quirk_no_clk_stretch; - /* Bring bus to a known state. Looks like STOP if bus is not free yet */ - setscl(bit_adap, 1); - udelay(bit_adap->udelay); - setsda(bit_adap, 1); - ret = add_adapter(adap); if (ret < 0) return ret; -- cgit v1.2.3 From 2173ed0adc7f0473e6b6ad636d8684a0d82da5e9 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 16 Jun 2018 22:37:57 +0900 Subject: i2c: algos: bit: mention our experience about initial states So, if somebody wants to re-implement this in the future, we pinpoint to a problem case. Signed-off-by: Wolfram Sang Acked-by: Alex Deucher Signed-off-by: Wolfram Sang --- drivers/i2c/algos/i2c-algo-bit.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 0c0eb16d710f..6ec65adaba49 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -647,6 +647,11 @@ static int __i2c_bit_add_bus(struct i2c_adapter *adap, if (bit_adap->getscl == NULL) adap->quirks = &i2c_bit_quirk_no_clk_stretch; + /* + * We tried forcing SCL/SDA to an initial state here. But that caused a + * regression, sadly. Check Bugzilla #200045 for details. + */ + ret = add_adapter(adap); if (ret < 0) return ret; -- cgit v1.2.3 From 9aa613674f89d01248ae2e4afe691b515ff8fbb6 Mon Sep 17 00:00:00 2001 From: Peter Rosin Date: Wed, 20 Jun 2018 11:43:23 +0200 Subject: i2c: smbus: kill memory leak on emulated and failed DMA SMBus xfers If DMA safe memory was allocated, but the subsequent I2C transfer fails the memory is leaked. Plug this leak. Fixes: 8a77821e74d6 ("i2c: smbus: use DMA safe buffers for emulated SMBus transactions") Signed-off-by: Peter Rosin Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/i2c-core-smbus.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c index f3f683041e7f..51970bae3c4a 100644 --- a/drivers/i2c/i2c-core-smbus.c +++ b/drivers/i2c/i2c-core-smbus.c @@ -465,15 +465,18 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, status = i2c_transfer(adapter, msg, num); if (status < 0) - return status; - if (status != num) - return -EIO; + goto cleanup; + if (status != num) { + status = -EIO; + goto cleanup; + } + status = 0; /* Check PEC if last message is a read */ if (i && (msg[num-1].flags & I2C_M_RD)) { status = i2c_smbus_check_pec(partial_pec, &msg[num-1]); if (status < 0) - return status; + goto cleanup; } if (read_write == I2C_SMBUS_READ) @@ -499,12 +502,13 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, break; } +cleanup: if (msg[0].flags & I2C_M_DMA_SAFE) kfree(msg[0].buf); if (msg[1].flags & I2C_M_DMA_SAFE) kfree(msg[1].buf); - return 0; + return status; } /** -- cgit v1.2.3 From 12b731dd46d9ee646318e6e9dc587314a3908a46 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 16 Jun 2018 21:56:36 +0900 Subject: i2c: gpio: initialize SCL to HIGH again It seems that during the conversion from gpio* to gpiod*, the initial state of SCL was wrongly switched to LOW. Fix it to be HIGH again. Fixes: 7bb75029ef34 ("i2c: gpio: Enforce open drain through gpiolib") Signed-off-by: Wolfram Sang Tested-by: Geert Uytterhoeven Reviewed-by: Linus Walleij Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 005e6e0330c2..66f85bbf3591 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -279,9 +279,9 @@ static int i2c_gpio_probe(struct platform_device *pdev) * required for an I2C bus. */ if (pdata->scl_is_open_drain) - gflags = GPIOD_OUT_LOW; + gflags = GPIOD_OUT_HIGH; else - gflags = GPIOD_OUT_LOW_OPEN_DRAIN; + gflags = GPIOD_OUT_HIGH_OPEN_DRAIN; priv->scl = i2c_gpio_get_desc(dev, "scl", 1, gflags); if (IS_ERR(priv->scl)) return PTR_ERR(priv->scl); -- cgit v1.2.3 From 9a98302de19991d51e067b88750585203b2a3ab6 Mon Sep 17 00:00:00 2001 From: Ping-Ke Shih Date: Thu, 28 Jun 2018 10:02:27 +0800 Subject: rtlwifi: rtl8821ae: fix firmware is not ready to run Without this patch, firmware will not run properly on rtl8821ae, and it causes bad user experience. For example, bad connection performance with low rate, higher power consumption, and so on. rtl8821ae uses two kinds of firmwares for normal and WoWlan cases, and each firmware has firmware data buffer and size individually. Original code always overwrite size of normal firmware rtlpriv->rtlhal.fwsize, and this mismatch causes firmware checksum error, then firmware can't start. In this situation, driver gives message "Firmware is not ready to run!". Fixes: fe89707f0afa ("rtlwifi: rtl8821ae: Simplify loading of WOWLAN firmware") Signed-off-by: Ping-Ke Shih Cc: Stable # 4.0+ Reviewed-by: Larry Finger Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtlwifi/core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/core.c b/drivers/net/wireless/realtek/rtlwifi/core.c index a3f46203ee7a..4bf7967590ca 100644 --- a/drivers/net/wireless/realtek/rtlwifi/core.c +++ b/drivers/net/wireless/realtek/rtlwifi/core.c @@ -130,7 +130,6 @@ found_alt: firmware->size); rtlpriv->rtlhal.wowlan_fwsize = firmware->size; } - rtlpriv->rtlhal.fwsize = firmware->size; release_firmware(firmware); } -- cgit v1.2.3 From e7441c9274a6a5453e06f4c2b8b5f72eca0a3f17 Mon Sep 17 00:00:00 2001 From: Denis Kenzior Date: Tue, 19 Jun 2018 10:39:50 -0500 Subject: mac80211: disable BHs/preemption in ieee80211_tx_control_port() On pre-emption enabled kernels the following print was being seen due to missing local_bh_disable/local_bh_enable calls. mac80211 assumes that pre-emption is disabled in the data path. BUG: using smp_processor_id() in preemptible [00000000] code: iwd/517 caller is __ieee80211_subif_start_xmit+0x144/0x210 [mac80211] [...] Call Trace: dump_stack+0x5c/0x80 check_preemption_disabled.cold.0+0x46/0x51 __ieee80211_subif_start_xmit+0x144/0x210 [mac80211] Fixes: 911806491425 ("mac80211: Add support for tx_control_port") Signed-off-by: Denis Kenzior [commit message rewrite, fixes tag] Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 44b5dfe8727d..fa1f1e63a264 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -4845,7 +4845,9 @@ int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev, skb_reset_network_header(skb); skb_reset_mac_header(skb); + local_bh_disable(); __ieee80211_subif_start_xmit(skb, skb->dev, flags); + local_bh_enable(); return 0; } -- cgit v1.2.3 From 188f60ab8e787fcbb5ac9d64ede23a0070231f09 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sun, 24 Jun 2018 21:10:49 -0400 Subject: nl80211: relax ht operation checks for mesh Commit 9757235f451c, "nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") relaxed the range for the HT operation field in meshconf, while also adding checks requiring the non-greenfield and non-ht-sta bits to be set in certain circumstances. The latter bit is actually reserved for mesh BSSes according to Table 9-168 in 802.11-2016, so in fact it should not be set. wpa_supplicant sets these bits because the mesh and AP code share the same implementation, but authsae does not. As a result, some meshconf updates from authsae which set only the NONHT_MIXED protection bits were being rejected. In order to avoid breaking userspace by changing the rules again, simply accept the values with or without the bits set, and mask off the reserved bit to match the spec. While in here, update the 802.11-2012 reference to 802.11-2016. Fixes: 9757235f451c ("nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") Cc: Masashi Honma Signed-off-by: Bob Copeland Reviewed-by: Masashi Honma Reviewed-by: Masashi Honma Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 19 +++---------------- 1 file changed, 3 insertions(+), 16 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index c7bbe5f0aae8..351eeaf16abe 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -6231,7 +6231,7 @@ do { \ nl80211_check_s32); /* * Check HT operation mode based on - * IEEE 802.11 2012 8.4.2.59 HT Operation element. + * IEEE 802.11-2016 9.4.2.57 HT Operation element. */ if (tb[NL80211_MESHCONF_HT_OPMODE]) { ht_opmode = nla_get_u16(tb[NL80211_MESHCONF_HT_OPMODE]); @@ -6241,22 +6241,9 @@ do { \ IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT)) return -EINVAL; - if ((ht_opmode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT) && - (ht_opmode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT)) - return -EINVAL; + /* NON_HT_STA bit is reserved, but some programs set it */ + ht_opmode &= ~IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT; - switch (ht_opmode & IEEE80211_HT_OP_MODE_PROTECTION) { - case IEEE80211_HT_OP_MODE_PROTECTION_NONE: - case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ: - if (ht_opmode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT) - return -EINVAL; - break; - case IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER: - case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED: - if (!(ht_opmode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT)) - return -EINVAL; - break; - } cfg->ht_opmode = ht_opmode; mask |= (1 << (NL80211_MESHCONF_HT_OPMODE - 1)); } -- cgit v1.2.3 From 95bca62fb723a121954fc7ae5473bb2c1f0d5986 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 29 Jun 2018 09:33:39 +0200 Subject: nl80211: check nla_parse_nested() return values At the very least we should check the return value if nla_parse_nested() is called with a non-NULL policy. Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 351eeaf16abe..4eece06be1e7 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -10949,9 +10949,12 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) rem) { u8 *mask_pat; - nla_parse_nested(pat_tb, MAX_NL80211_PKTPAT, pat, - nl80211_packet_pattern_policy, - info->extack); + err = nla_parse_nested(pat_tb, MAX_NL80211_PKTPAT, pat, + nl80211_packet_pattern_policy, + info->extack); + if (err) + goto error; + err = -EINVAL; if (!pat_tb[NL80211_PKTPAT_MASK] || !pat_tb[NL80211_PKTPAT_PATTERN]) @@ -11200,8 +11203,11 @@ static int nl80211_parse_coalesce_rule(struct cfg80211_registered_device *rdev, rem) { u8 *mask_pat; - nla_parse_nested(pat_tb, MAX_NL80211_PKTPAT, pat, - nl80211_packet_pattern_policy, NULL); + err = nla_parse_nested(pat_tb, MAX_NL80211_PKTPAT, pat, + nl80211_packet_pattern_policy, NULL); + if (err) + return err; + if (!pat_tb[NL80211_PKTPAT_MASK] || !pat_tb[NL80211_PKTPAT_PATTERN]) return -EINVAL; -- cgit v1.2.3 From 69705ad21029b6e92c9facb0eb12cde1a4fd52b7 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 7 Jun 2018 13:06:06 +0200 Subject: drm/exynos: ipp: Rework checking for the correct buffer formats Prepare a common function for size and scale checks and call it for source and destination buffers. Then also move there the state-less checks from exynos_drm_ipp_task_setup_buffer, so the format information is already available in limits processing. Finally perform the IPP_LIMIT_BUFFER check on the real width of the buffer (the width calculated from the provided buffer pitch). Signed-off-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_ipp.c | 108 +++++++++++++++++--------------- 1 file changed, 57 insertions(+), 51 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_ipp.c b/drivers/gpu/drm/exynos/exynos_drm_ipp.c index 26374e58c557..8840e6ec8e43 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_ipp.c +++ b/drivers/gpu/drm/exynos/exynos_drm_ipp.c @@ -345,27 +345,6 @@ static int exynos_drm_ipp_task_setup_buffer(struct exynos_drm_ipp_buffer *buf, int ret = 0; int i; - /* basic checks */ - if (buf->buf.width == 0 || buf->buf.height == 0) - return -EINVAL; - buf->format = drm_format_info(buf->buf.fourcc); - for (i = 0; i < buf->format->num_planes; i++) { - unsigned int width = (i == 0) ? buf->buf.width : - DIV_ROUND_UP(buf->buf.width, buf->format->hsub); - - if (buf->buf.pitch[i] == 0) - buf->buf.pitch[i] = width * buf->format->cpp[i]; - if (buf->buf.pitch[i] < width * buf->format->cpp[i]) - return -EINVAL; - if (!buf->buf.gem_id[i]) - return -ENOENT; - } - - /* pitch for additional planes must match */ - if (buf->format->num_planes > 2 && - buf->buf.pitch[1] != buf->buf.pitch[2]) - return -EINVAL; - /* get GEM buffers and check their size */ for (i = 0; i < buf->format->num_planes; i++) { unsigned int height = (i == 0) ? buf->buf.height : @@ -495,12 +474,13 @@ static int exynos_drm_ipp_check_size_limits(struct exynos_drm_ipp_buffer *buf, enum drm_ipp_size_id id = rotate ? IPP_LIMIT_ROTATED : IPP_LIMIT_AREA; struct drm_ipp_limit l; struct drm_exynos_ipp_limit_val *lh = &l.h, *lv = &l.v; + int real_width = buf->buf.pitch[0] / buf->format->cpp[0]; if (!limits) return 0; __get_size_limit(limits, num_limits, IPP_LIMIT_BUFFER, &l); - if (!__size_limit_check(buf->buf.width, &l.h) || + if (!__size_limit_check(real_width, &l.h) || !__size_limit_check(buf->buf.height, &l.v)) return -EINVAL; @@ -560,10 +540,62 @@ static int exynos_drm_ipp_check_scale_limits( return 0; } +static int exynos_drm_ipp_check_format(struct exynos_drm_ipp_task *task, + struct exynos_drm_ipp_buffer *buf, + struct exynos_drm_ipp_buffer *src, + struct exynos_drm_ipp_buffer *dst, + bool rotate, bool swap) +{ + const struct exynos_drm_ipp_formats *fmt; + int ret, i; + + fmt = __ipp_format_get(task->ipp, buf->buf.fourcc, buf->buf.modifier, + buf == src ? DRM_EXYNOS_IPP_FORMAT_SOURCE : + DRM_EXYNOS_IPP_FORMAT_DESTINATION); + if (!fmt) { + DRM_DEBUG_DRIVER("Task %pK: %s format not supported\n", task, + buf == src ? "src" : "dst"); + return -EINVAL; + } + + /* basic checks */ + if (buf->buf.width == 0 || buf->buf.height == 0) + return -EINVAL; + + buf->format = drm_format_info(buf->buf.fourcc); + for (i = 0; i < buf->format->num_planes; i++) { + unsigned int width = (i == 0) ? buf->buf.width : + DIV_ROUND_UP(buf->buf.width, buf->format->hsub); + + if (buf->buf.pitch[i] == 0) + buf->buf.pitch[i] = width * buf->format->cpp[i]; + if (buf->buf.pitch[i] < width * buf->format->cpp[i]) + return -EINVAL; + if (!buf->buf.gem_id[i]) + return -ENOENT; + } + + /* pitch for additional planes must match */ + if (buf->format->num_planes > 2 && + buf->buf.pitch[1] != buf->buf.pitch[2]) + return -EINVAL; + + /* check driver limits */ + ret = exynos_drm_ipp_check_size_limits(buf, fmt->limits, + fmt->num_limits, + rotate, + buf == dst ? swap : false); + if (ret) + return ret; + ret = exynos_drm_ipp_check_scale_limits(&src->rect, &dst->rect, + fmt->limits, + fmt->num_limits, swap); + return ret; +} + static int exynos_drm_ipp_task_check(struct exynos_drm_ipp_task *task) { struct exynos_drm_ipp *ipp = task->ipp; - const struct exynos_drm_ipp_formats *src_fmt, *dst_fmt; struct exynos_drm_ipp_buffer *src = &task->src, *dst = &task->dst; unsigned int rotation = task->transform.rotation; int ret = 0; @@ -607,37 +639,11 @@ static int exynos_drm_ipp_task_check(struct exynos_drm_ipp_task *task) return -EINVAL; } - src_fmt = __ipp_format_get(ipp, src->buf.fourcc, src->buf.modifier, - DRM_EXYNOS_IPP_FORMAT_SOURCE); - if (!src_fmt) { - DRM_DEBUG_DRIVER("Task %pK: src format not supported\n", task); - return -EINVAL; - } - ret = exynos_drm_ipp_check_size_limits(src, src_fmt->limits, - src_fmt->num_limits, - rotate, false); - if (ret) - return ret; - ret = exynos_drm_ipp_check_scale_limits(&src->rect, &dst->rect, - src_fmt->limits, - src_fmt->num_limits, swap); + ret = exynos_drm_ipp_check_format(task, src, src, dst, rotate, swap); if (ret) return ret; - dst_fmt = __ipp_format_get(ipp, dst->buf.fourcc, dst->buf.modifier, - DRM_EXYNOS_IPP_FORMAT_DESTINATION); - if (!dst_fmt) { - DRM_DEBUG_DRIVER("Task %pK: dst format not supported\n", task); - return -EINVAL; - } - ret = exynos_drm_ipp_check_size_limits(dst, dst_fmt->limits, - dst_fmt->num_limits, - false, swap); - if (ret) - return ret; - ret = exynos_drm_ipp_check_scale_limits(&src->rect, &dst->rect, - dst_fmt->limits, - dst_fmt->num_limits, swap); + ret = exynos_drm_ipp_check_format(task, dst, src, dst, false, swap); if (ret) return ret; -- cgit v1.2.3 From 1b0966c3e951da6ae523c4e954b1f43b22927948 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 7 Jun 2018 13:06:07 +0200 Subject: drm/exynos: rotator: Fix DRM_MODE_REFLECT_{X,Y} interpretation Horizontal (DRM_MODE_REFLECT_Y) and vertical (DMR_MODE_REFLECT_Y) flip were swapped in Rotator driver. Fix this by swapping code for interpreting them. Signed-off-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_rotator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c b/drivers/gpu/drm/exynos/exynos_drm_rotator.c index 1a76dd3d52e1..a820a68429b9 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_rotator.c +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c @@ -168,9 +168,9 @@ static void rotator_dst_set_transf(struct rot_context *rot, val &= ~ROT_CONTROL_FLIP_MASK; if (rotation & DRM_MODE_REFLECT_X) - val |= ROT_CONTROL_FLIP_HORIZONTAL; - if (rotation & DRM_MODE_REFLECT_Y) val |= ROT_CONTROL_FLIP_VERTICAL; + if (rotation & DRM_MODE_REFLECT_Y) + val |= ROT_CONTROL_FLIP_HORIZONTAL; val &= ~ROT_CONTROL_ROT_MASK; -- cgit v1.2.3 From 280e54c9f614c88292685383cf2d65057586e9fb Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Thu, 7 Jun 2018 13:06:08 +0200 Subject: drm/exynos: scaler: Reset hardware before starting the operation Ensure that Scaler hardware is properly reset and interrupts are cleared before processing next image. Signed-off-by: Andrzej Pietrasiewicz Signed-off-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_scaler.c | 32 +++++++++++++++++++++++++++--- 1 file changed, 29 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_scaler.c b/drivers/gpu/drm/exynos/exynos_drm_scaler.c index 91d4382343d0..d25069e88186 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_scaler.c +++ b/drivers/gpu/drm/exynos/exynos_drm_scaler.c @@ -30,6 +30,7 @@ #define scaler_write(cfg, offset) writel(cfg, scaler->regs + (offset)) #define SCALER_MAX_CLK 4 #define SCALER_AUTOSUSPEND_DELAY 2000 +#define SCALER_RESET_WAIT_RETRIES 100 struct scaler_data { const char *clk_name[SCALER_MAX_CLK]; @@ -100,6 +101,23 @@ static u32 scaler_get_format(u32 drm_fmt) return 0; } +static inline int scaler_reset(struct scaler_context *scaler) +{ + int retry = SCALER_RESET_WAIT_RETRIES; + + scaler_write(SCALER_CFG_SOFT_RESET, SCALER_CFG); + do { + cpu_relax(); + } while (retry > 1 && + scaler_read(SCALER_CFG) & SCALER_CFG_SOFT_RESET); + do { + cpu_relax(); + scaler_write(1, SCALER_INT_EN); + } while (retry > 0 && scaler_read(SCALER_INT_EN) != 1); + + return retry ? 0 : -EIO; +} + static inline void scaler_enable_int(struct scaler_context *scaler) { u32 val; @@ -354,9 +372,13 @@ static int scaler_commit(struct exynos_drm_ipp *ipp, u32 dst_fmt = scaler_get_format(task->dst.buf.fourcc); struct drm_exynos_ipp_task_rect *dst_pos = &task->dst.rect; - scaler->task = task; - pm_runtime_get_sync(scaler->dev); + if (scaler_reset(scaler)) { + pm_runtime_put(scaler->dev); + return -EIO; + } + + scaler->task = task; scaler_set_src_fmt(scaler, src_fmt); scaler_set_src_base(scaler, &task->src); @@ -394,7 +416,11 @@ static inline void scaler_disable_int(struct scaler_context *scaler) static inline u32 scaler_get_int_status(struct scaler_context *scaler) { - return scaler_read(SCALER_INT_STATUS); + u32 val = scaler_read(SCALER_INT_STATUS); + + scaler_write(val, SCALER_INT_STATUS); + + return val; } static inline int scaler_task_done(u32 val) -- cgit v1.2.3 From 4e1a6230313ad76c08633fa57853349de56f60a2 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 7 Jun 2018 13:06:09 +0200 Subject: drm/exynos: scaler: Fix support for YUV420, YUV422 and YUV444 modes Fix Cb/CR components order in two-planar YUV420, YUV422 and YUV444 modes. Signed-off-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_scaler.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_scaler.c b/drivers/gpu/drm/exynos/exynos_drm_scaler.c index d25069e88186..0ddb6eec7b11 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_scaler.c +++ b/drivers/gpu/drm/exynos/exynos_drm_scaler.c @@ -52,9 +52,9 @@ struct scaler_context { static u32 scaler_get_format(u32 drm_fmt) { switch (drm_fmt) { - case DRM_FORMAT_NV21: - return SCALER_YUV420_2P_UV; case DRM_FORMAT_NV12: + return SCALER_YUV420_2P_UV; + case DRM_FORMAT_NV21: return SCALER_YUV420_2P_VU; case DRM_FORMAT_YUV420: return SCALER_YUV420_3P; @@ -64,15 +64,15 @@ static u32 scaler_get_format(u32 drm_fmt) return SCALER_YUV422_1P_UYVY; case DRM_FORMAT_YVYU: return SCALER_YUV422_1P_YVYU; - case DRM_FORMAT_NV61: - return SCALER_YUV422_2P_UV; case DRM_FORMAT_NV16: + return SCALER_YUV422_2P_UV; + case DRM_FORMAT_NV61: return SCALER_YUV422_2P_VU; case DRM_FORMAT_YUV422: return SCALER_YUV422_3P; - case DRM_FORMAT_NV42: - return SCALER_YUV444_2P_UV; case DRM_FORMAT_NV24: + return SCALER_YUV444_2P_UV; + case DRM_FORMAT_NV42: return SCALER_YUV444_2P_VU; case DRM_FORMAT_YUV444: return SCALER_YUV444_3P; -- cgit v1.2.3 From 4958a1c0c9c4a48d6ba9e2b184d93cab0dce68e1 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 7 Jun 2018 13:06:10 +0200 Subject: drm/exynos: gsc: Use real buffer width for configuring the hardware DMA hardware should respect buffer pitch, so use the width calculated from the buffer pitch instead of the virtual one. Signed-off-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 35ac66730563..8af7f167015b 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -577,7 +577,7 @@ static void gsc_src_set_size(struct gsc_context *ctx, cfg &= ~(GSC_SRCIMG_HEIGHT_MASK | GSC_SRCIMG_WIDTH_MASK); - cfg |= (GSC_SRCIMG_WIDTH(buf->buf.width) | + cfg |= (GSC_SRCIMG_WIDTH(buf->buf.pitch[0] / buf->format->cpp[0]) | GSC_SRCIMG_HEIGHT(buf->buf.height)); gsc_write(cfg, GSC_SRCIMG_SIZE); @@ -868,7 +868,7 @@ static void gsc_dst_set_size(struct gsc_context *ctx, /* original size */ cfg = gsc_read(GSC_DSTIMG_SIZE); cfg &= ~(GSC_DSTIMG_HEIGHT_MASK | GSC_DSTIMG_WIDTH_MASK); - cfg |= GSC_DSTIMG_WIDTH(buf->buf.width) | + cfg |= GSC_DSTIMG_WIDTH(buf->buf.pitch[0] / buf->format->cpp[0]) | GSC_DSTIMG_HEIGHT(buf->buf.height); gsc_write(cfg, GSC_DSTIMG_SIZE); -- cgit v1.2.3 From 28b676329cc1adfa37b5291e13055e0819a80e42 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 7 Jun 2018 13:06:11 +0200 Subject: drm/exynos: gsc: Increase Exynos5433 buffer width alignment to 16 pixels Investigation revealed that GScaler hardware requires the real buffer width (pitch) to be aligned to 16 pixels. Signed-off-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 8af7f167015b..246300771d55 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -1341,7 +1341,7 @@ static const struct drm_exynos_ipp_limit gsc_5420_limits[] = { }; static const struct drm_exynos_ipp_limit gsc_5433_limits[] = { - { IPP_SIZE_LIMIT(BUFFER, .h = { 32, 8191, 2 }, .v = { 16, 8191, 2 }) }, + { IPP_SIZE_LIMIT(BUFFER, .h = { 32, 8191, 16 }, .v = { 16, 8191, 2 }) }, { IPP_SIZE_LIMIT(AREA, .h = { 16, 4800, 1 }, .v = { 8, 3344, 1 }) }, { IPP_SIZE_LIMIT(ROTATED, .h = { 32, 2047 }, .v = { 8, 8191 }) }, { IPP_SCALE_LIMIT(.h = { (1 << 16) / 16, (1 << 16) * 8 }, -- cgit v1.2.3 From 4cc11a5f53049c8a2b02763a53ecd42371355c10 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 7 Jun 2018 13:06:12 +0200 Subject: drm/exynos: gsc: Fix DRM_MODE_REFLECT_{X,Y} interpretation Horizontal (DRM_MODE_REFLECT_Y) and vertical (DMR_MODE_REFLECT_Y) flip were swapped in GScaler driver. Fix this by swapping code for interpreting them. Signed-off-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 246300771d55..177e31c3a51d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -523,30 +523,30 @@ static void gsc_src_set_transf(struct gsc_context *ctx, unsigned int rotation) switch (degree) { case DRM_MODE_ROTATE_0: - if (rotation & DRM_MODE_REFLECT_Y) - cfg |= GSC_IN_ROT_XFLIP; if (rotation & DRM_MODE_REFLECT_X) + cfg |= GSC_IN_ROT_XFLIP; + if (rotation & DRM_MODE_REFLECT_Y) cfg |= GSC_IN_ROT_YFLIP; break; case DRM_MODE_ROTATE_90: cfg |= GSC_IN_ROT_90; - if (rotation & DRM_MODE_REFLECT_Y) - cfg |= GSC_IN_ROT_XFLIP; if (rotation & DRM_MODE_REFLECT_X) + cfg |= GSC_IN_ROT_XFLIP; + if (rotation & DRM_MODE_REFLECT_Y) cfg |= GSC_IN_ROT_YFLIP; break; case DRM_MODE_ROTATE_180: cfg |= GSC_IN_ROT_180; - if (rotation & DRM_MODE_REFLECT_Y) - cfg &= ~GSC_IN_ROT_XFLIP; if (rotation & DRM_MODE_REFLECT_X) + cfg &= ~GSC_IN_ROT_XFLIP; + if (rotation & DRM_MODE_REFLECT_Y) cfg &= ~GSC_IN_ROT_YFLIP; break; case DRM_MODE_ROTATE_270: cfg |= GSC_IN_ROT_270; - if (rotation & DRM_MODE_REFLECT_Y) - cfg &= ~GSC_IN_ROT_XFLIP; if (rotation & DRM_MODE_REFLECT_X) + cfg &= ~GSC_IN_ROT_XFLIP; + if (rotation & DRM_MODE_REFLECT_Y) cfg &= ~GSC_IN_ROT_YFLIP; break; } -- cgit v1.2.3 From dd209ef809080ced903e7747ee3ef640c923a1d2 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 7 Jun 2018 13:06:13 +0200 Subject: drm/exynos: gsc: Fix support for NV16/61, YUV420/YVU420 and YUV422 modes Fix following issues related to planar YUV pixel format configuration: - NV16/61 modes were incorrectly programmed as NV12/21, - YVU420 was programmed as YUV420 on source, - YVU420 and YUV422 were programmed as YUV420 on output. Signed-off-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 29 ++++++++++++++++++++--------- drivers/gpu/drm/exynos/regs-gsc.h | 1 + 2 files changed, 21 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 177e31c3a51d..7ba414b52faa 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -492,21 +492,25 @@ static void gsc_src_set_fmt(struct gsc_context *ctx, u32 fmt) GSC_IN_CHROMA_ORDER_CRCB); break; case DRM_FORMAT_NV21: + cfg |= (GSC_IN_CHROMA_ORDER_CRCB | GSC_IN_YUV420_2P); + break; case DRM_FORMAT_NV61: - cfg |= (GSC_IN_CHROMA_ORDER_CRCB | - GSC_IN_YUV420_2P); + cfg |= (GSC_IN_CHROMA_ORDER_CRCB | GSC_IN_YUV422_2P); break; case DRM_FORMAT_YUV422: cfg |= GSC_IN_YUV422_3P; break; case DRM_FORMAT_YUV420: + cfg |= (GSC_IN_CHROMA_ORDER_CBCR | GSC_IN_YUV420_3P); + break; case DRM_FORMAT_YVU420: - cfg |= GSC_IN_YUV420_3P; + cfg |= (GSC_IN_CHROMA_ORDER_CRCB | GSC_IN_YUV420_3P); break; case DRM_FORMAT_NV12: + cfg |= (GSC_IN_CHROMA_ORDER_CBCR | GSC_IN_YUV420_2P); + break; case DRM_FORMAT_NV16: - cfg |= (GSC_IN_CHROMA_ORDER_CBCR | - GSC_IN_YUV420_2P); + cfg |= (GSC_IN_CHROMA_ORDER_CBCR | GSC_IN_YUV422_2P); break; } @@ -672,18 +676,25 @@ static void gsc_dst_set_fmt(struct gsc_context *ctx, u32 fmt) GSC_OUT_CHROMA_ORDER_CRCB); break; case DRM_FORMAT_NV21: - case DRM_FORMAT_NV61: cfg |= (GSC_OUT_CHROMA_ORDER_CRCB | GSC_OUT_YUV420_2P); break; + case DRM_FORMAT_NV61: + cfg |= (GSC_OUT_CHROMA_ORDER_CRCB | GSC_OUT_YUV422_2P); + break; case DRM_FORMAT_YUV422: + cfg |= GSC_OUT_YUV422_3P; + break; case DRM_FORMAT_YUV420: + cfg |= (GSC_OUT_CHROMA_ORDER_CBCR | GSC_OUT_YUV420_3P); + break; case DRM_FORMAT_YVU420: - cfg |= GSC_OUT_YUV420_3P; + cfg |= (GSC_OUT_CHROMA_ORDER_CRCB | GSC_OUT_YUV420_3P); break; case DRM_FORMAT_NV12: + cfg |= (GSC_OUT_CHROMA_ORDER_CBCR | GSC_OUT_YUV420_2P); + break; case DRM_FORMAT_NV16: - cfg |= (GSC_OUT_CHROMA_ORDER_CBCR | - GSC_OUT_YUV420_2P); + cfg |= (GSC_OUT_CHROMA_ORDER_CBCR | GSC_OUT_YUV422_2P); break; } diff --git a/drivers/gpu/drm/exynos/regs-gsc.h b/drivers/gpu/drm/exynos/regs-gsc.h index 4704a993cbb7..16b39734115c 100644 --- a/drivers/gpu/drm/exynos/regs-gsc.h +++ b/drivers/gpu/drm/exynos/regs-gsc.h @@ -138,6 +138,7 @@ #define GSC_OUT_YUV420_3P (3 << 4) #define GSC_OUT_YUV422_1P (4 << 4) #define GSC_OUT_YUV422_2P (5 << 4) +#define GSC_OUT_YUV422_3P (6 << 4) #define GSC_OUT_YUV444 (7 << 4) #define GSC_OUT_TILE_TYPE_MASK (1 << 2) #define GSC_OUT_TILE_C_16x8 (0 << 2) -- cgit v1.2.3 From 5d5657aac0b40867fe57c50d395e9bb08274ceb8 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 7 Jun 2018 13:06:14 +0200 Subject: drm/exynos: fimc: Use real buffer width for configuring the hardware DMA hardware should respect buffer pitch, so use the width calculated from the buffer pitch instead of the virtual one. Signed-off-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimc.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index 6127ef25acd6..e8d0670bb5f8 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -470,17 +470,18 @@ static void fimc_src_set_transf(struct fimc_context *ctx, unsigned int rotation) static void fimc_set_window(struct fimc_context *ctx, struct exynos_drm_ipp_buffer *buf) { + unsigned int real_width = buf->buf.pitch[0] / buf->format->cpp[0]; u32 cfg, h1, h2, v1, v2; /* cropped image */ h1 = buf->rect.x; - h2 = buf->buf.width - buf->rect.w - buf->rect.x; + h2 = real_width - buf->rect.w - buf->rect.x; v1 = buf->rect.y; v2 = buf->buf.height - buf->rect.h - buf->rect.y; DRM_DEBUG_KMS("x[%d]y[%d]w[%d]h[%d]hsize[%d]vsize[%d]\n", buf->rect.x, buf->rect.y, buf->rect.w, buf->rect.h, - buf->buf.width, buf->buf.height); + real_width, buf->buf.height); DRM_DEBUG_KMS("h1[%d]h2[%d]v1[%d]v2[%d]\n", h1, h2, v1, v2); /* @@ -503,12 +504,13 @@ static void fimc_set_window(struct fimc_context *ctx, static void fimc_src_set_size(struct fimc_context *ctx, struct exynos_drm_ipp_buffer *buf) { + unsigned int real_width = buf->buf.pitch[0] / buf->format->cpp[0]; u32 cfg; - DRM_DEBUG_KMS("hsize[%d]vsize[%d]\n", buf->buf.width, buf->buf.height); + DRM_DEBUG_KMS("hsize[%d]vsize[%d]\n", real_width, buf->buf.height); /* original size */ - cfg = (EXYNOS_ORGISIZE_HORIZONTAL(buf->buf.width) | + cfg = (EXYNOS_ORGISIZE_HORIZONTAL(real_width) | EXYNOS_ORGISIZE_VERTICAL(buf->buf.height)); fimc_write(ctx, cfg, EXYNOS_ORGISIZE); @@ -529,7 +531,7 @@ static void fimc_src_set_size(struct fimc_context *ctx, * for now, we support only ITU601 8 bit mode */ cfg = (EXYNOS_CISRCFMT_ITU601_8BIT | - EXYNOS_CISRCFMT_SOURCEHSIZE(buf->buf.width) | + EXYNOS_CISRCFMT_SOURCEHSIZE(real_width) | EXYNOS_CISRCFMT_SOURCEVSIZE(buf->buf.height)); fimc_write(ctx, cfg, EXYNOS_CISRCFMT); @@ -842,12 +844,13 @@ static void fimc_set_scaler(struct fimc_context *ctx, struct fimc_scaler *sc) static void fimc_dst_set_size(struct fimc_context *ctx, struct exynos_drm_ipp_buffer *buf) { + unsigned int real_width = buf->buf.pitch[0] / buf->format->cpp[0]; u32 cfg, cfg_ext; - DRM_DEBUG_KMS("hsize[%d]vsize[%d]\n", buf->buf.width, buf->buf.height); + DRM_DEBUG_KMS("hsize[%d]vsize[%d]\n", real_width, buf->buf.height); /* original size */ - cfg = (EXYNOS_ORGOSIZE_HORIZONTAL(buf->buf.width) | + cfg = (EXYNOS_ORGOSIZE_HORIZONTAL(real_width) | EXYNOS_ORGOSIZE_VERTICAL(buf->buf.height)); fimc_write(ctx, cfg, EXYNOS_ORGOSIZE); -- cgit v1.2.3 From ab337fc274a1957ff0771f19e826c736253f7c39 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 7 Jun 2018 13:07:40 +0200 Subject: drm/exynos: decon5433: Fix per-plane global alpha for XRGB modes Set per-plane global alpha to maximum value to get proper blending of XRGB and ARGB planes. This fixes the strange order of overlapping planes. Signed-off-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index 82c95c34447f..92d28b5b1077 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -356,8 +356,8 @@ static void decon_update_plane(struct exynos_drm_crtc *crtc, writel(val, ctx->addr + DECON_VIDOSDxB(win)); } - val = VIDOSD_Wx_ALPHA_R_F(0x0) | VIDOSD_Wx_ALPHA_G_F(0x0) | - VIDOSD_Wx_ALPHA_B_F(0x0); + val = VIDOSD_Wx_ALPHA_R_F(0xff) | VIDOSD_Wx_ALPHA_G_F(0xff) | + VIDOSD_Wx_ALPHA_B_F(0xff); writel(val, ctx->addr + DECON_VIDOSDxC(win)); val = VIDOSD_Wx_ALPHA_R_F(0x0) | VIDOSD_Wx_ALPHA_G_F(0x0) | -- cgit v1.2.3 From 7b7aa62c05eac9789c208b946f515983a9255d8d Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 7 Jun 2018 13:07:49 +0200 Subject: drm/exynos: decon5433: Fix WINCONx reset value The only bits that should be preserved in decon_win_set_fmt() is WINCONx_ENWIN_F. All other bits depends on the selected pixel formats and are set by the mentioned function. Signed-off-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index 92d28b5b1077..e868773ea509 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -265,7 +265,7 @@ static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win, unsigned long val; val = readl(ctx->addr + DECON_WINCONx(win)); - val &= ~WINCONx_BPPMODE_MASK; + val &= WINCONx_ENWIN_F; switch (fb->format->format) { case DRM_FORMAT_XRGB1555: -- cgit v1.2.3 From e94595b0f59c26581f6ae8a3972b99f56a415b76 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Sun, 17 Jun 2018 10:55:29 +0200 Subject: drm/exynos: ipp: use correct enum type The limit_id_fallback array uses enum drm_ipp_size_id to index its content. The content itself is of type enum drm_exynos_ipp_limit_type. Cc: Marek Szyprowski Signed-off-by: Stefan Agner Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_ipp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_ipp.c b/drivers/gpu/drm/exynos/exynos_drm_ipp.c index 8840e6ec8e43..b435db8fc916 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_ipp.c +++ b/drivers/gpu/drm/exynos/exynos_drm_ipp.c @@ -407,7 +407,7 @@ enum drm_ipp_size_id { IPP_LIMIT_BUFFER, IPP_LIMIT_AREA, IPP_LIMIT_ROTATED, IPP_LIMIT_MAX }; -static const enum drm_ipp_size_id limit_id_fallback[IPP_LIMIT_MAX][4] = { +static const enum drm_exynos_ipp_limit_type limit_id_fallback[IPP_LIMIT_MAX][4] = { [IPP_LIMIT_BUFFER] = { DRM_EXYNOS_IPP_LIMIT_SIZE_BUFFER }, [IPP_LIMIT_AREA] = { DRM_EXYNOS_IPP_LIMIT_SIZE_AREA, DRM_EXYNOS_IPP_LIMIT_SIZE_BUFFER }, -- cgit v1.2.3 From e699e2c6a654ff8d7303f5297ab5dd83da7b23e0 Mon Sep 17 00:00:00 2001 From: Shakeel Butt Date: Wed, 27 Jun 2018 15:16:42 -0700 Subject: net, mm: account sock objects to kmemcg Currently the kernel accounts the memory for network traffic through mem_cgroup_[un]charge_skmem() interface. However the memory accounted only includes the truesize of sk_buff which does not include the size of sock objects. In our production environment, with opt-out kmem accounting, the sock kmem caches (TCP[v6], UDP[v6], RAW[v6], UNIX) are among the top most charged kmem caches and consume a significant amount of memory which can not be left as system overhead. So, this patch converts the kmem caches of all sock objects to SLAB_ACCOUNT. Signed-off-by: Shakeel Butt Suggested-by: Eric Dumazet Reviewed-by: Kirill Tkhai Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/sock.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/core/sock.c b/net/core/sock.c index bcc41829a16d..9e8f65585b81 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -3243,7 +3243,8 @@ static int req_prot_init(const struct proto *prot) rsk_prot->slab = kmem_cache_create(rsk_prot->slab_name, rsk_prot->obj_size, 0, - prot->slab_flags, NULL); + SLAB_ACCOUNT | prot->slab_flags, + NULL); if (!rsk_prot->slab) { pr_crit("%s: Can't create request sock SLAB cache!\n", @@ -3258,7 +3259,8 @@ int proto_register(struct proto *prot, int alloc_slab) if (alloc_slab) { prot->slab = kmem_cache_create_usercopy(prot->name, prot->obj_size, 0, - SLAB_HWCACHE_ALIGN | prot->slab_flags, + SLAB_HWCACHE_ALIGN | SLAB_ACCOUNT | + prot->slab_flags, prot->useroffset, prot->usersize, NULL); @@ -3281,6 +3283,7 @@ int proto_register(struct proto *prot, int alloc_slab) kmem_cache_create(prot->twsk_prot->twsk_slab_name, prot->twsk_prot->twsk_obj_size, 0, + SLAB_ACCOUNT | prot->slab_flags, NULL); if (prot->twsk_prot->twsk_slab == NULL) -- cgit v1.2.3 From e88958e6369aeba48623afa18dd67fdf41c98d75 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 29 Jun 2018 15:37:24 +0200 Subject: net: handle NULL ->poll gracefully The big aio poll revert broke various network protocols that don't implement ->poll as a patch in the aio poll serie removed sock_no_poll and made the common code handle this case. Reported-by: syzbot+57727883dbad76db2ef0@syzkaller.appspotmail.com Reported-by: syzbot+cdb0d3176b53d35ad454@syzkaller.appspotmail.com Reported-by: syzbot+2c7e8f74f8b2571c87e8@syzkaller.appspotmail.com Reported-by: Tetsuo Handa Fixes: a11e1d432b51 ("Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLL") Signed-off-by: Christoph Hellwig Signed-off-by: Linus Torvalds --- net/socket.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/socket.c b/net/socket.c index a564c6ed19d5..85633622c94d 100644 --- a/net/socket.c +++ b/net/socket.c @@ -1133,6 +1133,8 @@ static __poll_t sock_poll(struct file *file, poll_table *wait) __poll_t events = poll_requested_events(wait); sock_poll_busy_loop(sock, events); + if (!sock->ops->poll) + return 0; return sock->ops->poll(file, sock, wait) | sock_poll_busy_flag(sock); } -- cgit v1.2.3 From 2cd3ae2129736f9019130064d09713a375870941 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Fri, 29 Jun 2018 15:37:25 +0200 Subject: aio: mark __aio_sigset::sigmask const io_pgetevents() will not change the signal mask. Mark it const to make it clear and to reduce the need for casts in user code. Reviewed-by: Christoph Hellwig Signed-off-by: Avi Kivity Signed-off-by: Al Viro [hch: reapply the patch that got incorrectly reverted] Signed-off-by: Christoph Hellwig Signed-off-by: Linus Torvalds --- include/uapi/linux/aio_abi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/linux/aio_abi.h b/include/uapi/linux/aio_abi.h index d4e768d55d14..3c5038b587ba 100644 --- a/include/uapi/linux/aio_abi.h +++ b/include/uapi/linux/aio_abi.h @@ -111,7 +111,7 @@ struct iocb { #undef IFLITTLE struct __aio_sigset { - sigset_t __user *sigmask; + const sigset_t __user *sigmask; size_t sigsetsize; }; -- cgit v1.2.3 From 1f57f8d442f8017587eeebd8617913bfc3661d3d Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 28 Jun 2018 11:54:01 -0600 Subject: blk-mq: don't queue more if we get a busy return Some devices have different queue limits depending on the type of IO. A classic case is SATA NCQ, where some commands can queue, but others cannot. If we have NCQ commands inflight and encounter a non-queueable command, the driver returns busy. Currently we attempt to dispatch more from the scheduler, if we were able to queue some commands. But for the case where we ended up stopping due to BUSY, we should not attempt to retrieve more from the scheduler. If we do, we can get into a situation where we attempt to queue a non-queueable command, get BUSY, then successfully retrieve more commands from that scheduler and queue those. This can repeat forever, starving the non-queuable command indefinitely. Fix this by NOT attempting to pull more commands from the scheduler, if we get a BUSY return. This should also be more optimal in terms of letting requests stay in the scheduler for as long as possible, if we get a BUSY due to the regular out-of-tags condition. Reviewed-by: Omar Sandoval Reviewed-by: Ming Lei Signed-off-by: Jens Axboe --- block/blk-mq.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/block/blk-mq.c b/block/blk-mq.c index b6888ff556cf..d394cdd8d8c6 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -1075,6 +1075,9 @@ static bool blk_mq_mark_tag_wait(struct blk_mq_hw_ctx **hctx, #define BLK_MQ_RESOURCE_DELAY 3 /* ms units */ +/* + * Returns true if we did some work AND can potentially do more. + */ bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list, bool got_budget) { @@ -1205,8 +1208,17 @@ bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list, blk_mq_run_hw_queue(hctx, true); else if (needs_restart && (ret == BLK_STS_RESOURCE)) blk_mq_delay_run_hw_queue(hctx, BLK_MQ_RESOURCE_DELAY); + + return false; } + /* + * If the host/device is unable to accept more work, inform the + * caller of that. + */ + if (ret == BLK_STS_RESOURCE || ret == BLK_STS_DEV_RESOURCE) + return false; + return (queued + errors) != 0; } -- cgit v1.2.3 From fad2d4ef636654e926d374ef038f4cd4286661f6 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Mon, 25 Jun 2018 15:51:30 -0700 Subject: drbd: Fix drbd_request_prepare() discard handling Fix the test that verifies whether bio_op(bio) represents a discard or write zeroes operation. Compile-tested only. Cc: Philipp Reisner Cc: Lars Ellenberg Fixes: 7435e9018f91 ("drbd: zero-out partial unaligned discards on local backend") Signed-off-by: Bart Van Assche Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/block/drbd/drbd_req.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c index a47e4987ee46..d146fedc38bb 100644 --- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -1244,8 +1244,8 @@ drbd_request_prepare(struct drbd_device *device, struct bio *bio, unsigned long _drbd_start_io_acct(device, req); /* process discards always from our submitter thread */ - if ((bio_op(bio) & REQ_OP_WRITE_ZEROES) || - (bio_op(bio) & REQ_OP_DISCARD)) + if (bio_op(bio) == REQ_OP_WRITE_ZEROES || + bio_op(bio) == REQ_OP_DISCARD) goto queue_for_submitter_thread; if (rw == WRITE && req->private_bio && req->i.size -- cgit v1.2.3 From 9544bc5347207a68eb308cc8aaaed6c3a687cabd Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 29 Jun 2018 08:48:06 -0600 Subject: sg: remove ->sg_magic member This was introduced more than a decade ago when sg chaining was added, but we never really caught anything with it. The scatterlist entry size can be critical, since drivers allocate it, so remove the magic member. Recently it's been triggering allocation stalls and failures in NVMe. Tested-by: Jordan Glover Acked-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/gpu/drm/i915/i915_drv.h | 3 --- include/linux/scatterlist.h | 18 ------------------ lib/scatterlist.c | 6 ------ tools/virtio/linux/scatterlist.h | 18 ------------------ 4 files changed, 45 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 34c125e2d90c..9180f67746b4 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2238,9 +2238,6 @@ static inline struct scatterlist *____sg_next(struct scatterlist *sg) **/ static inline struct scatterlist *__sg_next(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif return sg_is_last(sg) ? NULL : ____sg_next(sg); } diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h index 51f52020ad5f..093aa57120b0 100644 --- a/include/linux/scatterlist.h +++ b/include/linux/scatterlist.h @@ -9,9 +9,6 @@ #include struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif unsigned long page_link; unsigned int offset; unsigned int length; @@ -64,7 +61,6 @@ struct sg_table { * */ -#define SG_MAGIC 0x87654321 #define SG_CHAIN 0x01UL #define SG_END 0x02UL @@ -98,7 +94,6 @@ static inline void sg_assign_page(struct scatterlist *sg, struct page *page) */ BUG_ON((unsigned long) page & (SG_CHAIN | SG_END)); #ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); BUG_ON(sg_is_chain(sg)); #endif sg->page_link = page_link | (unsigned long) page; @@ -129,7 +124,6 @@ static inline void sg_set_page(struct scatterlist *sg, struct page *page, static inline struct page *sg_page(struct scatterlist *sg) { #ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); BUG_ON(sg_is_chain(sg)); #endif return (struct page *)((sg)->page_link & ~(SG_CHAIN | SG_END)); @@ -195,9 +189,6 @@ static inline void sg_chain(struct scatterlist *prv, unsigned int prv_nents, **/ static inline void sg_mark_end(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif /* * Set termination bit, clear potential chain bit */ @@ -215,9 +206,6 @@ static inline void sg_mark_end(struct scatterlist *sg) **/ static inline void sg_unmark_end(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif sg->page_link &= ~SG_END; } @@ -260,12 +248,6 @@ static inline void *sg_virt(struct scatterlist *sg) static inline void sg_init_marker(struct scatterlist *sgl, unsigned int nents) { -#ifdef CONFIG_DEBUG_SG - unsigned int i; - - for (i = 0; i < nents; i++) - sgl[i].sg_magic = SG_MAGIC; -#endif sg_mark_end(&sgl[nents - 1]); } diff --git a/lib/scatterlist.c b/lib/scatterlist.c index 06dad7a072fd..d4ae67d6cd1e 100644 --- a/lib/scatterlist.c +++ b/lib/scatterlist.c @@ -24,9 +24,6 @@ **/ struct scatterlist *sg_next(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif if (sg_is_last(sg)) return NULL; @@ -111,10 +108,7 @@ struct scatterlist *sg_last(struct scatterlist *sgl, unsigned int nents) for_each_sg(sgl, sg, nents, i) ret = sg; -#ifdef CONFIG_DEBUG_SG - BUG_ON(sgl[0].sg_magic != SG_MAGIC); BUG_ON(!sg_is_last(ret)); -#endif return ret; } EXPORT_SYMBOL(sg_last); diff --git a/tools/virtio/linux/scatterlist.h b/tools/virtio/linux/scatterlist.h index 9a45f90e2d08..369ee308b668 100644 --- a/tools/virtio/linux/scatterlist.h +++ b/tools/virtio/linux/scatterlist.h @@ -36,7 +36,6 @@ static inline void sg_assign_page(struct scatterlist *sg, struct page *page) */ BUG_ON((unsigned long) page & 0x03); #ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); BUG_ON(sg_is_chain(sg)); #endif sg->page_link = page_link | (unsigned long) page; @@ -67,7 +66,6 @@ static inline void sg_set_page(struct scatterlist *sg, struct page *page, static inline struct page *sg_page(struct scatterlist *sg) { #ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); BUG_ON(sg_is_chain(sg)); #endif return (struct page *)((sg)->page_link & ~0x3); @@ -116,9 +114,6 @@ static inline void sg_chain(struct scatterlist *prv, unsigned int prv_nents, **/ static inline void sg_mark_end(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif /* * Set termination bit, clear potential chain bit */ @@ -136,17 +131,11 @@ static inline void sg_mark_end(struct scatterlist *sg) **/ static inline void sg_unmark_end(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif sg->page_link &= ~0x02; } static inline struct scatterlist *sg_next(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif if (sg_is_last(sg)) return NULL; @@ -160,13 +149,6 @@ static inline struct scatterlist *sg_next(struct scatterlist *sg) static inline void sg_init_table(struct scatterlist *sgl, unsigned int nents) { memset(sgl, 0, sizeof(*sgl) * nents); -#ifdef CONFIG_DEBUG_SG - { - unsigned int i; - for (i = 0; i < nents; i++) - sgl[i].sg_magic = SG_MAGIC; - } -#endif sg_mark_end(&sgl[nents - 1]); } -- cgit v1.2.3 From 24b6c22504a27210a8377e54d24d425ae414f2c1 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 20 Apr 2018 23:13:44 +0200 Subject: parisc: Build kernel without -ffunction-sections As suggested by Nick Piggin it seems we can drop the -ffunction-sections compile flag, now that the kernel uses thin archives. Testing with 32- and 64-bit kernel showed no difference in kernel size. Suggested-by: Nicholas Piggin Signed-off-by: Helge Deller --- arch/parisc/Makefile | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 714284ea6cc2..5ce030266e7d 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -65,10 +65,6 @@ endif # kernel. cflags-y += -mdisable-fpregs -# Without this, "ld -r" results in .text sections that are too big -# (> 0x40000) for branches to reach stubs. -cflags-y += -ffunction-sections - # Use long jumps instead of long branches (needed if your linker fails to # link a too big vmlinux executable). Not enabled for building modules. ifdef CONFIG_MLONGCALLS -- cgit v1.2.3 From 18d405af30bf6506bf2fc49056de7691c949812e Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 28 Jun 2018 23:34:57 +0200 Subject: bpf, arm32: fix to use bpf_jit_binary_lock_ro api Any eBPF JIT that where its underlying arch supports ARCH_HAS_SET_MEMORY would need to use bpf_jit_binary_{un,}lock_ro() pair instead of the set_memory_{ro,rw}() pair directly as otherwise changes to the former might break. arm32's eBPF conversion missed to change it, so fix this up here. Fixes: 39c13c204bb1 ("arm: eBPF JIT compiler") Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: Alexei Starovoitov --- arch/arm/net/bpf_jit_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 6e8b71613039..f6a62ae44a65 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -1844,7 +1844,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) /* there are 2 passes here */ bpf_jit_dump(prog->len, image_size, 2, ctx.target); - set_memory_ro((unsigned long)header, header->pages); + bpf_jit_binary_lock_ro(header); prog->bpf_func = (void *)ctx.target; prog->jited = 1; prog->jited_len = image_size; -- cgit v1.2.3 From f605ce5eb26ac934fb8106d75d46a2c875a2bf23 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 28 Jun 2018 23:34:58 +0200 Subject: bpf, s390: fix potential memleak when later bpf_jit_prog fails If we would ever fail in the bpf_jit_prog() pass that writes the actual insns to the image after we got header via bpf_jit_binary_alloc() then we also need to make sure to free it through bpf_jit_binary_free() again when bailing out. Given we had prior bpf_jit_prog() passes to initially probe for clobbered registers, program size and to fill in addrs arrray for jump targets, this is more of a theoretical one, but at least make sure this doesn't break with future changes. Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Signed-off-by: Daniel Borkmann Cc: Martin Schwidefsky Acked-by: Alexei Starovoitov Signed-off-by: Alexei Starovoitov --- arch/s390/net/bpf_jit_comp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index d2db8acb1a55..5f0234ec8038 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -1286,6 +1286,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp) goto free_addrs; } if (bpf_jit_prog(&jit, fp)) { + bpf_jit_binary_free(header); fp = orig_fp; goto free_addrs; } -- cgit v1.2.3 From 85782e037f8aba8922dadb24a1523ca0b82ab8bc Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 28 Jun 2018 23:34:59 +0200 Subject: bpf: undo prog rejection on read-only lock failure Partially undo commit 9facc336876f ("bpf: reject any prog that failed read-only lock") since it caused a regression, that is, syzkaller was able to manage to cause a panic via fault injection deep in set_memory_ro() path by letting an allocation fail: In x86's __change_page_attr_set_clr() it was able to change the attributes of the primary mapping but not in the alias mapping via cpa_process_alias(), so the second, inner call to the __change_page_attr() via __change_page_attr_set_clr() had to split a larger page and failed in the alloc_pages() with the artifically triggered allocation error which is then propagated down to the call site. Thus, for set_memory_ro() this means that it returned with an error, but from debugging a probe_kernel_write() revealed EFAULT on that memory since the primary mapping succeeded to get changed. Therefore the subsequent hdr->locked = 0 reset triggered the panic as it was performed on read-only memory, so call-site assumptions were infact wrong to assume that it would either succeed /or/ not succeed at all since there's no such rollback in set_memory_*() calls from partial change of mappings, in other words, we're left in a state that is "half done". A later undo via set_memory_rw() is succeeding though due to matching permissions on that part (aka due to the try_preserve_large_page() succeeding). While reproducing locally with explicitly triggering this error, the initial splitting only happens on rare occasions and in real world it would additionally need oom conditions, but that said, it could partially fail. Therefore, it is definitely wrong to bail out on set_memory_ro() error and reject the program with the set_memory_*() semantics we have today. Shouldn't have gone the extra mile since no other user in tree today infact checks for any set_memory_*() errors, e.g. neither module_enable_ro() / module_disable_ro() for module RO/NX handling which is mostly default these days nor kprobes core with alloc_insn_page() / free_insn_page() as examples that could be invoked long after bootup and original 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks") did neither when it got first introduced to BPF so "improving" with bailing out was clearly not right when set_memory_*() cannot handle it today. Kees suggested that if set_memory_*() can fail, we should annotate it with __must_check, and all callers need to deal with it gracefully given those set_memory_*() markings aren't "advisory", but they're expected to actually do what they say. This might be an option worth to move forward in future but would at the same time require that set_memory_*() calls from supporting archs are guaranteed to be "atomic" in that they provide rollback if part of the range fails, once that happened, the transition from RW -> RO could be made more robust that way, while subsequent RO -> RW transition /must/ continue guaranteeing to always succeed the undo part. Reported-by: syzbot+a4eb8c7766952a1ca872@syzkaller.appspotmail.com Reported-by: syzbot+d866d1925855328eac3b@syzkaller.appspotmail.com Fixes: 9facc336876f ("bpf: reject any prog that failed read-only lock") Cc: Laura Abbott Cc: Kees Cook Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: Alexei Starovoitov --- include/linux/filter.h | 56 ++++++++------------------------------------------ kernel/bpf/core.c | 30 +-------------------------- 2 files changed, 9 insertions(+), 77 deletions(-) diff --git a/include/linux/filter.h b/include/linux/filter.h index 20f2659dd829..300baad62c88 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -470,9 +470,7 @@ struct sock_fprog_kern { }; struct bpf_binary_header { - u16 pages; - u16 locked:1; - + u32 pages; /* Some arches need word alignment for their instructions */ u8 image[] __aligned(4); }; @@ -481,7 +479,7 @@ struct bpf_prog { u16 pages; /* Number of allocated pages */ u16 jited:1, /* Is our filter JIT'ed? */ jit_requested:1,/* archs need to JIT the prog */ - locked:1, /* Program image locked? */ + undo_set_mem:1, /* Passed set_memory_ro() checkpoint */ gpl_compatible:1, /* Is filter GPL compatible? */ cb_access:1, /* Is control block accessed? */ dst_needed:1, /* Do we need dst entry? */ @@ -677,46 +675,24 @@ bpf_ctx_narrow_access_ok(u32 off, u32 size, u32 size_default) static inline void bpf_prog_lock_ro(struct bpf_prog *fp) { -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - fp->locked = 1; - if (set_memory_ro((unsigned long)fp, fp->pages)) - fp->locked = 0; -#endif + fp->undo_set_mem = 1; + set_memory_ro((unsigned long)fp, fp->pages); } static inline void bpf_prog_unlock_ro(struct bpf_prog *fp) { -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - if (fp->locked) { - WARN_ON_ONCE(set_memory_rw((unsigned long)fp, fp->pages)); - /* In case set_memory_rw() fails, we want to be the first - * to crash here instead of some random place later on. - */ - fp->locked = 0; - } -#endif + if (fp->undo_set_mem) + set_memory_rw((unsigned long)fp, fp->pages); } static inline void bpf_jit_binary_lock_ro(struct bpf_binary_header *hdr) { -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - hdr->locked = 1; - if (set_memory_ro((unsigned long)hdr, hdr->pages)) - hdr->locked = 0; -#endif + set_memory_ro((unsigned long)hdr, hdr->pages); } static inline void bpf_jit_binary_unlock_ro(struct bpf_binary_header *hdr) { -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - if (hdr->locked) { - WARN_ON_ONCE(set_memory_rw((unsigned long)hdr, hdr->pages)); - /* In case set_memory_rw() fails, we want to be the first - * to crash here instead of some random place later on. - */ - hdr->locked = 0; - } -#endif + set_memory_rw((unsigned long)hdr, hdr->pages); } static inline struct bpf_binary_header * @@ -728,22 +704,6 @@ bpf_jit_binary_hdr(const struct bpf_prog *fp) return (void *)addr; } -#ifdef CONFIG_ARCH_HAS_SET_MEMORY -static inline int bpf_prog_check_pages_ro_single(const struct bpf_prog *fp) -{ - if (!fp->locked) - return -ENOLCK; - if (fp->jited) { - const struct bpf_binary_header *hdr = bpf_jit_binary_hdr(fp); - - if (!hdr->locked) - return -ENOLCK; - } - - return 0; -} -#endif - int sk_filter_trim_cap(struct sock *sk, struct sk_buff *skb, unsigned int cap); static inline int sk_filter(struct sock *sk, struct sk_buff *skb) { diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index a9e6c04d0f4a..1e5625d46414 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -598,8 +598,6 @@ bpf_jit_binary_alloc(unsigned int proglen, u8 **image_ptr, bpf_fill_ill_insns(hdr, size); hdr->pages = size / PAGE_SIZE; - hdr->locked = 0; - hole = min_t(unsigned int, size - (proglen + sizeof(*hdr)), PAGE_SIZE - sizeof(*hdr)); start = (get_random_int() % hole) & ~(alignment - 1); @@ -1450,22 +1448,6 @@ static int bpf_check_tail_call(const struct bpf_prog *fp) return 0; } -static int bpf_prog_check_pages_ro_locked(const struct bpf_prog *fp) -{ -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - int i, err; - - for (i = 0; i < fp->aux->func_cnt; i++) { - err = bpf_prog_check_pages_ro_single(fp->aux->func[i]); - if (err) - return err; - } - - return bpf_prog_check_pages_ro_single(fp); -#endif - return 0; -} - static void bpf_prog_select_func(struct bpf_prog *fp) { #ifndef CONFIG_BPF_JIT_ALWAYS_ON @@ -1524,17 +1506,7 @@ finalize: * all eBPF JITs might immediately support all features. */ *err = bpf_check_tail_call(fp); - if (*err) - return fp; - - /* Checkpoint: at this point onwards any cBPF -> eBPF or - * native eBPF program is read-only. If we failed to change - * the page attributes (e.g. allocation failure from - * splitting large pages), then reject the whole program - * in order to guarantee not ending up with any W+X pages - * from BPF side in kernel. - */ - *err = bpf_prog_check_pages_ro_locked(fp); + return fp; } EXPORT_SYMBOL_GPL(bpf_prog_select_runtime); -- cgit v1.2.3 From 55c5e0c602c20cb6f350e5ae357cfd7e04ebb189 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 2 Jun 2018 11:02:02 -0300 Subject: dt-bindings: clock: imx6ul: Do not change the clock definition order Commit f5a4670de966 ("clk: imx: Add new clo01 and clo2 controlled by CCOSR") introduced the CLK_CLKO definitions, but didn't put them at the end of the list, which may cause dtb breakage when running an old dtb with a newer kernel. In order to avoid that, simply add the new CLK_CKO clock definitions at the end of the list. Fixes: f5a4670de966 ("clk: imx: Add new clo01 and clo2 controlled by CCOSR") Reported-by: Stefan Wahren Signed-off-by: Fabio Estevam Acked-by: Rob Herring Reviewed-by: Stefan Agner Signed-off-by: Stephen Boyd --- include/dt-bindings/clock/imx6ul-clock.h | 40 +++++++++++++++----------------- 1 file changed, 19 insertions(+), 21 deletions(-) diff --git a/include/dt-bindings/clock/imx6ul-clock.h b/include/dt-bindings/clock/imx6ul-clock.h index 9564597cbfac..0aa1d9c3e0b9 100644 --- a/include/dt-bindings/clock/imx6ul-clock.h +++ b/include/dt-bindings/clock/imx6ul-clock.h @@ -235,27 +235,25 @@ #define IMX6UL_CLK_CSI_PODF 222 #define IMX6UL_CLK_PLL3_120M 223 #define IMX6UL_CLK_KPP 224 -#define IMX6UL_CLK_CKO1_SEL 225 -#define IMX6UL_CLK_CKO1_PODF 226 -#define IMX6UL_CLK_CKO1 227 -#define IMX6UL_CLK_CKO2_SEL 228 -#define IMX6UL_CLK_CKO2_PODF 229 -#define IMX6UL_CLK_CKO2 230 -#define IMX6UL_CLK_CKO 231 - -/* For i.MX6ULL */ -#define IMX6ULL_CLK_ESAI_PRED 232 -#define IMX6ULL_CLK_ESAI_PODF 233 -#define IMX6ULL_CLK_ESAI_EXTAL 234 -#define IMX6ULL_CLK_ESAI_MEM 235 -#define IMX6ULL_CLK_ESAI_IPG 236 -#define IMX6ULL_CLK_DCP_CLK 237 -#define IMX6ULL_CLK_EPDC_PRE_SEL 238 -#define IMX6ULL_CLK_EPDC_SEL 239 -#define IMX6ULL_CLK_EPDC_PODF 240 -#define IMX6ULL_CLK_EPDC_ACLK 241 -#define IMX6ULL_CLK_EPDC_PIX 242 -#define IMX6ULL_CLK_ESAI_SEL 243 +#define IMX6ULL_CLK_ESAI_PRED 225 +#define IMX6ULL_CLK_ESAI_PODF 226 +#define IMX6ULL_CLK_ESAI_EXTAL 227 +#define IMX6ULL_CLK_ESAI_MEM 228 +#define IMX6ULL_CLK_ESAI_IPG 229 +#define IMX6ULL_CLK_DCP_CLK 230 +#define IMX6ULL_CLK_EPDC_PRE_SEL 231 +#define IMX6ULL_CLK_EPDC_SEL 232 +#define IMX6ULL_CLK_EPDC_PODF 233 +#define IMX6ULL_CLK_EPDC_ACLK 234 +#define IMX6ULL_CLK_EPDC_PIX 235 +#define IMX6ULL_CLK_ESAI_SEL 236 +#define IMX6UL_CLK_CKO1_SEL 237 +#define IMX6UL_CLK_CKO1_PODF 238 +#define IMX6UL_CLK_CKO1 239 +#define IMX6UL_CLK_CKO2_SEL 240 +#define IMX6UL_CLK_CKO2_PODF 241 +#define IMX6UL_CLK_CKO2 242 +#define IMX6UL_CLK_CKO 243 #define IMX6UL_CLK_END 244 #endif /* __DT_BINDINGS_CLOCK_IMX6UL_H */ -- cgit v1.2.3 From 4050360f964694a3ac0c83badd1a441207c86889 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 29 Jun 2018 13:47:38 -0500 Subject: PCI: rcar: Shut the PHY down in failpath If anything fails past phy_init_fn() and the system is a Gen3 with a PHY, the PHY will be left on and inited. This is caused by the phy_init_fn, which is in fact a pointer to rcar_pcie_phy_init_gen3() function, which starts the PHY, yet has no counterpart in the failpath. Add that counterpart. Fixes: 517ca93a7159 ("PCI: rcar: Add R-Car gen3 PHY support") Signed-off-by: Marek Vasut Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Geert Uytterhoeven Acked-by: Simon Horman Cc: Geert Uytterhoeven Cc: Phil Edworthy Cc: Wolfram Sang --- drivers/pci/controller/pcie-rcar.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c index 874d75c9ee4a..8b0d3206cbc4 100644 --- a/drivers/pci/controller/pcie-rcar.c +++ b/drivers/pci/controller/pcie-rcar.c @@ -1165,7 +1165,7 @@ static int rcar_pcie_probe(struct platform_device *pdev) if (rcar_pcie_hw_init(pcie)) { dev_info(dev, "PCIe link down\n"); err = -ENODEV; - goto err_clk_disable; + goto err_phy_shutdown; } data = rcar_pci_read_reg(pcie, MACSR); @@ -1177,7 +1177,7 @@ static int rcar_pcie_probe(struct platform_device *pdev) dev_err(dev, "failed to enable MSI support: %d\n", err); - goto err_clk_disable; + goto err_phy_shutdown; } } @@ -1191,6 +1191,12 @@ err_msi_teardown: if (IS_ENABLED(CONFIG_PCI_MSI)) rcar_pcie_teardown_msi(pcie); +err_phy_shutdown: + if (pcie->phy) { + phy_power_off(pcie->phy); + phy_exit(pcie->phy); + } + err_clk_disable: clk_disable_unprepare(pcie->bus_clk); -- cgit v1.2.3 From 3c5777c372b6eb2e17802b3dc4bd5ebea45d9bcc Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 29 Jun 2018 13:48:15 -0500 Subject: PCI: rcar: Clean up PHY init on failure If the Gen3 PHY fails to power up, the code does not undo the initialization caused by phy_init(). Add the missing failure handling to the rcar_pcie_phy_init_gen3() function. Fixes: 517ca93a7159 ("PCI: rcar: Add R-Car gen3 PHY support") Reported-by: Geert Uytterhoeven Signed-off-by: Marek Vasut Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Geert Uytterhoeven Acked-by: Simon Horman Cc: Geert Uytterhoeven Cc: Phil Edworthy Cc: Wolfram Sang --- drivers/pci/controller/pcie-rcar.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c index 8b0d3206cbc4..c8febb009454 100644 --- a/drivers/pci/controller/pcie-rcar.c +++ b/drivers/pci/controller/pcie-rcar.c @@ -680,7 +680,11 @@ static int rcar_pcie_phy_init_gen3(struct rcar_pcie *pcie) if (err) return err; - return phy_power_on(pcie->phy); + err = phy_power_on(pcie->phy); + if (err) + phy_exit(pcie->phy); + + return err; } static int rcar_msi_alloc(struct rcar_msi *chip) -- cgit v1.2.3 From 9bc5f0833a55c7bf768d517b5fdcf89ead43b794 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 29 Jun 2018 13:49:04 -0500 Subject: PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes PCIE_DW_PLAT_HOST does not have any platform dependency, so it should not default to yes. Fixes: 1d906b22076e12cf ("PCI: dwc: Add support for EP mode") Signed-off-by: Geert Uytterhoeven Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Acked-by: Gustavo Pimentel --- drivers/pci/controller/dwc/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig index 16f52c626b4b..91b0194240a5 100644 --- a/drivers/pci/controller/dwc/Kconfig +++ b/drivers/pci/controller/dwc/Kconfig @@ -58,7 +58,6 @@ config PCIE_DW_PLAT_HOST depends on PCI && PCI_MSI_IRQ_DOMAIN select PCIE_DW_HOST select PCIE_DW_PLAT - default y help Enables support for the PCIe controller in the Designware IP to work in host mode. There are two instances of PCIe controller in -- cgit v1.2.3 From fb0de5b8dcc68da4a0d39b0f5fcd5368085ad7c1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 29 Jun 2018 13:49:24 -0500 Subject: PCI: endpoint: Use after free in pci_epf_unregister_driver() We need to use list_for_each_entry_safe() because the pci_ep_cfs_remove_epf_group() function frees "group". Fixes: ef1433f717a2 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry") Signed-off-by: Dan Carpenter [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Acked-by: Kishon Vijay Abraham I --- drivers/pci/endpoint/pci-epf-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c index 523a8cab3bfb..bf53fad636a5 100644 --- a/drivers/pci/endpoint/pci-epf-core.c +++ b/drivers/pci/endpoint/pci-epf-core.c @@ -145,10 +145,10 @@ EXPORT_SYMBOL_GPL(pci_epf_alloc_space); */ void pci_epf_unregister_driver(struct pci_epf_driver *driver) { - struct config_group *group; + struct config_group *group, *tmp; mutex_lock(&pci_epf_mutex); - list_for_each_entry(group, &driver->epf_group, group_entry) + list_for_each_entry_safe(group, tmp, &driver->epf_group, group_entry) pci_ep_cfs_remove_epf_group(group); list_del(&driver->epf_group); mutex_unlock(&pci_epf_mutex); -- cgit v1.2.3 From 8c3f9bd851a4d3acf0a0f222d4e9e41c0cd1ea8e Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Fri, 29 Jun 2018 13:49:54 -0500 Subject: PCI: xilinx: Add missing of_node_put() The call to of_get_next_child() returns a node pointer with refcount incremented thus it must be explicitly decremented here after the last usage. Fixes: 8961def56845 ("PCI: xilinx: Add Xilinx AXI PCIe Host Bridge IP driver") Signed-off-by: Nicholas Mc Guire [lorenzo.pieralisi@arm.com: reworked commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas --- drivers/pci/controller/pcie-xilinx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pci/controller/pcie-xilinx.c b/drivers/pci/controller/pcie-xilinx.c index b110a3a814e3..7b1389d8e2a5 100644 --- a/drivers/pci/controller/pcie-xilinx.c +++ b/drivers/pci/controller/pcie-xilinx.c @@ -509,6 +509,7 @@ static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port) port->leg_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX, &intx_domain_ops, port); + of_node_put(pcie_intc_node); if (!port->leg_domain) { dev_err(dev, "Failed to get a INTx IRQ domain\n"); return -ENODEV; -- cgit v1.2.3 From 342639d996f18bc0a4db2f42a84230c0a966dc94 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Fri, 29 Jun 2018 13:50:10 -0500 Subject: PCI: xilinx-nwl: Add missing of_node_put() The call to of_get_next_child() returns a node pointer with refcount incremented thus it must be explicitly decremented here after the last usage. Fixes: ab597d35ef11 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller") Signed-off-by: Nicholas Mc Guire [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas --- drivers/pci/controller/pcie-xilinx-nwl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c index 6a4bbb5b3de0..fb32840ce8e6 100644 --- a/drivers/pci/controller/pcie-xilinx-nwl.c +++ b/drivers/pci/controller/pcie-xilinx-nwl.c @@ -559,7 +559,7 @@ static int nwl_pcie_init_irq_domain(struct nwl_pcie *pcie) PCI_NUM_INTX, &legacy_domain_ops, pcie); - + of_node_put(legacy_intc_node); if (!pcie->legacy_irq_domain) { dev_err(dev, "failed to create IRQ domain\n"); return -ENOMEM; -- cgit v1.2.3 From 3dc6ddfedc2818eaaa36842fbb049191e0c5e50f Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Fri, 29 Jun 2018 13:50:27 -0500 Subject: PCI: faraday: Add missing of_node_put() The call to of_get_next_child() returns a node pointer with refcount incremented thus it must be explicitly decremented here in the error path and after the last usage. Fixes: d3c68e0a7e34 ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver") Signed-off-by: Nicholas Mc Guire [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Linus Walleij --- drivers/pci/controller/pci-ftpci100.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/pci/controller/pci-ftpci100.c b/drivers/pci/controller/pci-ftpci100.c index a1ebe9ed441f..20bb2564a6b3 100644 --- a/drivers/pci/controller/pci-ftpci100.c +++ b/drivers/pci/controller/pci-ftpci100.c @@ -355,11 +355,13 @@ static int faraday_pci_setup_cascaded_irq(struct faraday_pci *p) irq = of_irq_get(intc, 0); if (irq <= 0) { dev_err(p->dev, "failed to get parent IRQ\n"); + of_node_put(intc); return irq ?: -EINVAL; } p->irqdomain = irq_domain_add_linear(intc, PCI_NUM_INTX, &faraday_pci_irqdomain_ops, p); + of_node_put(intc); if (!p->irqdomain) { dev_err(p->dev, "failed to create Gemini PCI IRQ domain\n"); return -EINVAL; -- cgit v1.2.3 From 38972375ef7bdc7dd989bcb48d5448662a95bca2 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 29 Jun 2018 15:08:52 -0500 Subject: PCI/IOV: Reset total_VFs limit after detaching PF driver The TotalVFs register in the SR-IOV capability is the hardware limit on the number of VFs. A PF driver can limit the number of VFs further with pci_sriov_set_totalvfs(). When the PF driver is removed, reset any VF limit that was imposed by the driver because that limit may not apply to other drivers. Before 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"), pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual functions", and the nfp driver used that to remove the VF limit when the driver unloads. 8d85a7a4f2c9 broke that because instead of removing the VF limit, pci_sriov_set_totalvfs(pdev, 0) actually sets the limit to zero, and that limit persists even if another driver is loaded. We could fix that by making the nfp driver reset the limit when it unloads, but it seems more robust to do it in the PCI core instead of relying on the driver. The regression scenario is: nfp_pci_probe (driver 1) ... nfp_pci_remove pci_sriov_set_totalvfs(pf->pdev, 0) # limits VFs to 0 ... nfp_pci_probe (driver 2) nfp_rtsym_read_le("nfd_vf_cfg_max_vfs") # no VF limit from firmware Now driver 2 is broken because the VF limit is still 0 from driver 1. Fixes: 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0") Signed-off-by: Jakub Kicinski [bhelgaas: changelog, rename functions] Signed-off-by: Bjorn Helgaas --- drivers/pci/iov.c | 16 ++++++++++++++++ drivers/pci/pci-driver.c | 1 + drivers/pci/pci.h | 4 ++++ 3 files changed, 21 insertions(+) diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index d0d73dbbd5ca..0f04ae648cf1 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -574,6 +574,22 @@ void pci_iov_release(struct pci_dev *dev) sriov_release(dev); } +/** + * pci_iov_remove - clean up SR-IOV state after PF driver is detached + * @dev: the PCI device + */ +void pci_iov_remove(struct pci_dev *dev) +{ + struct pci_sriov *iov = dev->sriov; + + if (!dev->is_physfn) + return; + + iov->driver_max_VFs = iov->total_VFs; + if (iov->num_VFs) + pci_warn(dev, "driver left SR-IOV enabled after remove\n"); +} + /** * pci_iov_update_resource - update a VF BAR * @dev: the PCI device diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index c125d53033c6..6792292b5fc7 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -445,6 +445,7 @@ static int pci_device_remove(struct device *dev) } pcibios_free_irq(pci_dev); pci_dev->driver = NULL; + pci_iov_remove(pci_dev); } /* Undo the runtime PM settings in local_pci_probe() */ diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index c358e7a07f3f..882f1f9596df 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -311,6 +311,7 @@ static inline void pci_restore_ats_state(struct pci_dev *dev) #ifdef CONFIG_PCI_IOV int pci_iov_init(struct pci_dev *dev); void pci_iov_release(struct pci_dev *dev); +void pci_iov_remove(struct pci_dev *dev); void pci_iov_update_resource(struct pci_dev *dev, int resno); resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno); void pci_restore_iov_state(struct pci_dev *dev); @@ -323,6 +324,9 @@ static inline int pci_iov_init(struct pci_dev *dev) } static inline void pci_iov_release(struct pci_dev *dev) +{ +} +static inline void pci_iov_remove(struct pci_dev *dev) { } static inline void pci_restore_iov_state(struct pci_dev *dev) -- cgit v1.2.3 From 83235822b8b4fe47ecbd6b6bcbcc902860ac00fc Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 29 Jun 2018 15:09:00 -0500 Subject: nfp: stop limiting VFs to 0 Before 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"), pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual functions". After 8d85a7a4f2c9, it means "we can't enable *any* VFs". That broke this scenario where nfp intends to remove any limit on the number of VFs that can be enabled: nfp_pci_probe nfp_pcie_sriov_read_nfd_limit nfp_rtsym_read_le("nfd_vf_cfg_max_vfs", &err) pci_sriov_set_totalvfs(pf->pdev, 0) # if FW didn't expose a limit ... # userspace writes N to sysfs "sriov_numvfs": sriov_numvfs_store pci_sriov_get_totalvfs # now returns 0 return -ERANGE Prior to 8d85a7a4f2c9, pci_sriov_get_totalvfs() returned TotalVFs, but it now returns 0. Remove the pci_sriov_set_totalvfs(pdev, 0) calls so we don't limit the number of VFs that can be enabled. Fixes: 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0") Signed-off-by: Jakub Kicinski [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas --- drivers/net/ethernet/netronome/nfp/nfp_main.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/net/ethernet/netronome/nfp/nfp_main.c b/drivers/net/ethernet/netronome/nfp/nfp_main.c index 46b76d5a726c..152283d7e59c 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_main.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_main.c @@ -240,7 +240,6 @@ static int nfp_pcie_sriov_read_nfd_limit(struct nfp_pf *pf) return pci_sriov_set_totalvfs(pf->pdev, pf->limit_vfs); pf->limit_vfs = ~0; - pci_sriov_set_totalvfs(pf->pdev, 0); /* 0 is unset */ /* Allow any setting for backwards compatibility if symbol not found */ if (err == -ENOENT) return 0; @@ -668,7 +667,7 @@ static int nfp_pci_probe(struct pci_dev *pdev, err = nfp_net_pci_probe(pf); if (err) - goto err_sriov_unlimit; + goto err_fw_unload; err = nfp_hwmon_register(pf); if (err) { @@ -680,8 +679,6 @@ static int nfp_pci_probe(struct pci_dev *pdev, err_net_remove: nfp_net_pci_remove(pf); -err_sriov_unlimit: - pci_sriov_set_totalvfs(pf->pdev, 0); err_fw_unload: kfree(pf->rtbl); nfp_mip_close(pf->mip); @@ -715,7 +712,6 @@ static void nfp_pci_remove(struct pci_dev *pdev) nfp_hwmon_unregister(pf); nfp_pcie_sriov_disable(pdev); - pci_sriov_set_totalvfs(pf->pdev, 0); nfp_net_pci_remove(pf); -- cgit v1.2.3 From c860e997e9170a6d68f9d1e6e2cf61f572191aaf Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Wed, 27 Jun 2018 16:04:48 -0700 Subject: tcp: fix Fast Open key endianness Fast Open key could be stored in different endian based on the CPU. Previously hosts in different endianness in a server farm using the same key config (sysctl value) would produce different cookies. This patch fixes it by always storing it as little endian to keep same API for LE hosts. Reported-by: Daniele Iamartino Signed-off-by: Yuchung Cheng Signed-off-by: Eric Dumazet Signed-off-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/sysctl_net_ipv4.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index d06247ba08b2..af0a857d8352 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -265,8 +265,9 @@ static int proc_tcp_fastopen_key(struct ctl_table *table, int write, ipv4.sysctl_tcp_fastopen); struct ctl_table tbl = { .maxlen = (TCP_FASTOPEN_KEY_LENGTH * 2 + 10) }; struct tcp_fastopen_context *ctxt; - int ret; u32 user_key[4]; /* 16 bytes, matching TCP_FASTOPEN_KEY_LENGTH */ + __le32 key[4]; + int ret, i; tbl.data = kmalloc(tbl.maxlen, GFP_KERNEL); if (!tbl.data) @@ -275,11 +276,14 @@ static int proc_tcp_fastopen_key(struct ctl_table *table, int write, rcu_read_lock(); ctxt = rcu_dereference(net->ipv4.tcp_fastopen_ctx); if (ctxt) - memcpy(user_key, ctxt->key, TCP_FASTOPEN_KEY_LENGTH); + memcpy(key, ctxt->key, TCP_FASTOPEN_KEY_LENGTH); else - memset(user_key, 0, sizeof(user_key)); + memset(key, 0, sizeof(key)); rcu_read_unlock(); + for (i = 0; i < ARRAY_SIZE(key); i++) + user_key[i] = le32_to_cpu(key[i]); + snprintf(tbl.data, tbl.maxlen, "%08x-%08x-%08x-%08x", user_key[0], user_key[1], user_key[2], user_key[3]); ret = proc_dostring(&tbl, write, buffer, lenp, ppos); @@ -290,13 +294,17 @@ static int proc_tcp_fastopen_key(struct ctl_table *table, int write, ret = -EINVAL; goto bad_key; } - tcp_fastopen_reset_cipher(net, NULL, user_key, + + for (i = 0; i < ARRAY_SIZE(user_key); i++) + key[i] = cpu_to_le32(user_key[i]); + + tcp_fastopen_reset_cipher(net, NULL, key, TCP_FASTOPEN_KEY_LENGTH); } bad_key: pr_debug("proc FO key set 0x%x-%x-%x-%x <- 0x%s: %u\n", - user_key[0], user_key[1], user_key[2], user_key[3], + user_key[0], user_key[1], user_key[2], user_key[3], (char *)tbl.data, ret); kfree(tbl.data); return ret; -- cgit v1.2.3 From 92291c95e71a7898109c1f95adfb48aa69e5ba7b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 28 Jun 2018 12:24:42 +0300 Subject: atm: iphase: fix a 64 bit bug The code assumes that there is 4 bytes in a pointer and it doesn't allocate enough memory. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/atm/iphase.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index ff81a576347e..82532c299bb5 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -1618,7 +1618,7 @@ static int rx_init(struct atm_dev *dev) skb_queue_head_init(&iadev->rx_dma_q); iadev->rx_free_desc_qhead = NULL; - iadev->rx_open = kcalloc(4, iadev->num_vc, GFP_KERNEL); + iadev->rx_open = kcalloc(iadev->num_vc, sizeof(void *), GFP_KERNEL); if (!iadev->rx_open) { printk(KERN_ERR DEV_LABEL "itf %d couldn't get free page\n", dev->number); -- cgit v1.2.3 From 5037c6280606396ab4d3065b066d4b574df020dc Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 28 Jun 2018 12:31:25 +0300 Subject: cnic: tidy up a size calculation Static checkers complain that id_tbl->table points to longs and 4 bytes is smaller than sizeof(long). But the since other side is dividing by 32 instead of sizeof(long), that means the current code works fine. Anyway, it's more conventional to use the BITS_TO_LONGS() macro when we're allocating a bitmap. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/cnic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c index 30273a7717e2..4fd829b5e65d 100644 --- a/drivers/net/ethernet/broadcom/cnic.c +++ b/drivers/net/ethernet/broadcom/cnic.c @@ -660,7 +660,7 @@ static int cnic_init_id_tbl(struct cnic_id_tbl *id_tbl, u32 size, u32 start_id, id_tbl->max = size; id_tbl->next = next; spin_lock_init(&id_tbl->lock); - id_tbl->table = kcalloc(DIV_ROUND_UP(size, 32), 4, GFP_KERNEL); + id_tbl->table = kcalloc(BITS_TO_LONGS(size), sizeof(long), GFP_KERNEL); if (!id_tbl->table) return -ENOMEM; -- cgit v1.2.3 From 484c016d9392786ce5c74017c206c706f29f823d Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Thu, 28 Jun 2018 04:52:15 -0700 Subject: bnx2x: Fix receiving tx-timeout in error or recovery state. Driver performs the internal reload when it receives tx-timeout event from the OS. Internal reload might fail in some scenarios e.g., fatal HW issues. In such cases OS still see the link, which would result in undesirable functionalities such as re-generation of tx-timeouts. The patch addresses this issue by indicating the link-down to OS when tx-timeout is detected, and keeping the link in down state till the internal reload is successful. Please consider applying it to 'net' branch. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 1 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 6 ++++++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 6 ++++++ 3 files changed, 13 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index d847e1b9c37b..be1506169076 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1533,6 +1533,7 @@ struct bnx2x { struct link_vars link_vars; u32 link_cnt; struct bnx2x_link_report_data last_reported_link; + bool force_link_down; struct mdio_if_info mdio; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 8cd73ff5debc..af7b5a4d8ba0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -1261,6 +1261,11 @@ void __bnx2x_link_report(struct bnx2x *bp) { struct bnx2x_link_report_data cur_data; + if (bp->force_link_down) { + bp->link_vars.link_up = 0; + return; + } + /* reread mf_cfg */ if (IS_PF(bp) && !CHIP_IS_E1(bp)) bnx2x_read_mf_cfg(bp); @@ -2817,6 +2822,7 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) bp->pending_max = 0; } + bp->force_link_down = false; if (bp->port.pmf) { rc = bnx2x_initial_phy_init(bp, load_mode); if (rc) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 5b1ed240bf18..57348f2b49a3 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -10279,6 +10279,12 @@ static void bnx2x_sp_rtnl_task(struct work_struct *work) bp->sp_rtnl_state = 0; smp_mb(); + /* Immediately indicate link as down */ + bp->link_vars.link_up = 0; + bp->force_link_down = true; + netif_carrier_off(bp->dev); + BNX2X_ERR("Indicating link is down due to Tx-timeout\n"); + bnx2x_nic_unload(bp, UNLOAD_NORMAL, true); /* When ret value shows failure of allocation failure, * the nic is rebooted again. If open still fails, a error -- cgit v1.2.3 From b95f6fbc8e15803a596ca5e5e21008fba29694c6 Mon Sep 17 00:00:00 2001 From: Madalin Bucur Date: Thu, 28 Jun 2018 15:26:50 +0300 Subject: fsl/fman: fix parser reporting bad checksum on short frames The FMan hardware parser needs to be configured to remove the short frame padding from the checksum calculation, otherwise short UDP and TCP frames are likely to be marked as having a bad checksum. Signed-off-by: Madalin Bucur Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fman/fman_port.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/ethernet/freescale/fman/fman_port.c b/drivers/net/ethernet/freescale/fman/fman_port.c index ce6e24c74978..ecbf6187e13a 100644 --- a/drivers/net/ethernet/freescale/fman/fman_port.c +++ b/drivers/net/ethernet/freescale/fman/fman_port.c @@ -324,6 +324,10 @@ struct fman_port_qmi_regs { #define HWP_HXS_PHE_REPORT 0x00000800 #define HWP_HXS_PCAC_PSTAT 0x00000100 #define HWP_HXS_PCAC_PSTOP 0x00000001 +#define HWP_HXS_TCP_OFFSET 0xA +#define HWP_HXS_UDP_OFFSET 0xB +#define HWP_HXS_SH_PAD_REM 0x80000000 + struct fman_port_hwp_regs { struct { u32 ssa; /* Soft Sequence Attachment */ @@ -728,6 +732,10 @@ static void init_hwp(struct fman_port *port) iowrite32be(0xffffffff, ®s->pmda[i].lcv); } + /* Short packet padding removal from checksum calculation */ + iowrite32be(HWP_HXS_SH_PAD_REM, ®s->pmda[HWP_HXS_TCP_OFFSET].ssa); + iowrite32be(HWP_HXS_SH_PAD_REM, ®s->pmda[HWP_HXS_UDP_OFFSET].ssa); + start_port_hwp(port); } -- cgit v1.2.3 From 595e802e53f24642a145cf7f3e4ac9afab4c21ec Mon Sep 17 00:00:00 2001 From: Madalin Bucur Date: Thu, 28 Jun 2018 15:26:51 +0300 Subject: dpaa_eth: DPAA SGT needs to be 256B The DPAA HW requires that at least 256 bytes from the start of the first scatter-gather table entry are allocated and accessible. The hardware reads the maximum size the table can have in one access, thus requiring that the allocation and mapping to be done for the maximum size of 256B even if there is a smaller number of entries in the table. Signed-off-by: Madalin Bucur Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c index 5f4e1ffa7b95..ab02057ac730 100644 --- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c @@ -125,6 +125,9 @@ MODULE_PARM_DESC(tx_timeout, "The Tx timeout in ms"); /* Default alignment for start of data in an Rx FD */ #define DPAA_FD_DATA_ALIGNMENT 16 +/* The DPAA requires 256 bytes reserved and mapped for the SGT */ +#define DPAA_SGT_SIZE 256 + /* Values for the L3R field of the FM Parse Results */ /* L3 Type field: First IP Present IPv4 */ @@ -1617,8 +1620,8 @@ static struct sk_buff *dpaa_cleanup_tx_fd(const struct dpaa_priv *priv, if (unlikely(qm_fd_get_format(fd) == qm_fd_sg)) { nr_frags = skb_shinfo(skb)->nr_frags; - dma_unmap_single(dev, addr, qm_fd_get_offset(fd) + - sizeof(struct qm_sg_entry) * (1 + nr_frags), + dma_unmap_single(dev, addr, + qm_fd_get_offset(fd) + DPAA_SGT_SIZE, dma_dir); /* The sgt buffer has been allocated with netdev_alloc_frag(), @@ -1903,8 +1906,7 @@ static int skb_to_sg_fd(struct dpaa_priv *priv, void *sgt_buf; /* get a page frag to store the SGTable */ - sz = SKB_DATA_ALIGN(priv->tx_headroom + - sizeof(struct qm_sg_entry) * (1 + nr_frags)); + sz = SKB_DATA_ALIGN(priv->tx_headroom + DPAA_SGT_SIZE); sgt_buf = netdev_alloc_frag(sz); if (unlikely(!sgt_buf)) { netdev_err(net_dev, "netdev_alloc_frag() failed for size %d\n", @@ -1972,9 +1974,8 @@ static int skb_to_sg_fd(struct dpaa_priv *priv, skbh = (struct sk_buff **)buffer_start; *skbh = skb; - addr = dma_map_single(dev, buffer_start, priv->tx_headroom + - sizeof(struct qm_sg_entry) * (1 + nr_frags), - dma_dir); + addr = dma_map_single(dev, buffer_start, + priv->tx_headroom + DPAA_SGT_SIZE, dma_dir); if (unlikely(dma_mapping_error(dev, addr))) { dev_err(dev, "DMA mapping failed"); err = -EINVAL; -- cgit v1.2.3 From d14b56f508ad70eca3e659545aab3c45200f258c Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Thu, 28 Jun 2018 17:53:06 +0200 Subject: net: cleanup gfp mask in alloc_skb_with_frags alloc_skb_with_frags uses __GFP_NORETRY for non-sleeping allocations which is just a noop and a little bit confusing. __GFP_NORETRY was added by ed98df3361f0 ("net: use __GFP_NORETRY for high order allocations") to prevent from the OOM killer. Yet this was not enough because fb05e7a89f50 ("net: don't wait for order-3 page allocation") didn't want an excessive reclaim for non-costly orders so it made it completely NOWAIT while it preserved __GFP_NORETRY in place which is now redundant. Drop the pointless __GFP_NORETRY because this function is used as copy&paste source for other places. Reviewed-by: Eric Dumazet Signed-off-by: Michal Hocko Signed-off-by: David S. Miller --- net/core/skbuff.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index c642304f178c..eba8dae22c25 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -5276,8 +5276,7 @@ struct sk_buff *alloc_skb_with_frags(unsigned long header_len, if (npages >= 1 << order) { page = alloc_pages((gfp_mask & ~__GFP_DIRECT_RECLAIM) | __GFP_COMP | - __GFP_NOWARN | - __GFP_NORETRY, + __GFP_NOWARN, order); if (page) goto fill_page; -- cgit v1.2.3 From e7c7faa936680a2f0e78fc6d9683a5728421a150 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Thu, 28 Jun 2018 13:36:55 -0700 Subject: net/ipv6: Fix updates to prefix route Sowmini reported that a recent commit broke prefix routes for linklocal addresses. The newly added modify_prefix_route is attempting to add a new prefix route when the ifp priority does not match the route metric however the check needs to account for the default priority. In addition, the route add fails because the route already exists, and then the delete removes the one that exists. Flip the order to do the delete first. Fixes: 8308f3ff1753 ("net/ipv6: Add support for specifying metric of connected routes") Reported-by: Sowmini Varadhan Tested-by: Sowmini Varadhan Signed-off-by: David Ahern Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index c134286d6a41..91580c62bb86 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -4528,6 +4528,7 @@ static int modify_prefix_route(struct inet6_ifaddr *ifp, unsigned long expires, u32 flags) { struct fib6_info *f6i; + u32 prio; f6i = addrconf_get_prefix_route(&ifp->addr, ifp->prefix_len, @@ -4536,13 +4537,15 @@ static int modify_prefix_route(struct inet6_ifaddr *ifp, if (!f6i) return -ENOENT; - if (f6i->fib6_metric != ifp->rt_priority) { + prio = ifp->rt_priority ? : IP6_RT_PRIO_ADDRCONF; + if (f6i->fib6_metric != prio) { + /* delete old one */ + ip6_del_rt(dev_net(ifp->idev->dev), f6i); + /* add new one */ addrconf_prefix_route(&ifp->addr, ifp->prefix_len, ifp->rt_priority, ifp->idev->dev, expires, flags, GFP_KERNEL); - /* delete old one */ - ip6_del_rt(dev_net(ifp->idev->dev), f6i); } else { if (!expires) fib6_clean_expires(f6i); -- cgit v1.2.3 From 713b4a33524721767703956654f4d6713c556f2b Mon Sep 17 00:00:00 2001 From: Dan Murphy Date: Fri, 29 Jun 2018 10:28:31 -0500 Subject: net: phy: DP83TC811: Fix disabling interrupts Fix a bug where INT_STAT1 was written twice and INT_STAT2 was ignored when disabling interrupts. Fixes: b753a9faaf9a ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy") Reviewed-by: Andrew Lunn Signed-off-by: Dan Murphy Signed-off-by: David S. Miller --- drivers/net/phy/dp83tc811.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/dp83tc811.c b/drivers/net/phy/dp83tc811.c index 081d99aa3985..49ac678eb2dc 100644 --- a/drivers/net/phy/dp83tc811.c +++ b/drivers/net/phy/dp83tc811.c @@ -222,7 +222,7 @@ static int dp83811_config_intr(struct phy_device *phydev) if (err < 0) return err; - err = phy_write(phydev, MII_DP83811_INT_STAT1, 0); + err = phy_write(phydev, MII_DP83811_INT_STAT2, 0); } return err; -- cgit v1.2.3 From cafb39600e7a73263122a0e2db052d691686378f Mon Sep 17 00:00:00 2001 From: Bert Kenward Date: Fri, 29 Jun 2018 16:29:28 +0100 Subject: sfc: correctly initialise filter rwsem for farch Fixes: fc7a6c287ff3 ("sfc: use a semaphore to lock farch filters too") Suggested-by: Joseph Korty Signed-off-by: Bert Kenward Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/farch.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/sfc/farch.c b/drivers/net/ethernet/sfc/farch.c index 8edf20967c82..e045a5d6b938 100644 --- a/drivers/net/ethernet/sfc/farch.c +++ b/drivers/net/ethernet/sfc/farch.c @@ -2794,6 +2794,7 @@ int efx_farch_filter_table_probe(struct efx_nic *efx) if (!state) return -ENOMEM; efx->filter_state = state; + init_rwsem(&state->lock); table = &state->table[EFX_FARCH_FILTER_TABLE_RX_IP]; table->id = EFX_FARCH_FILTER_TABLE_RX_IP; -- cgit v1.2.3 From bc800e8b39bad60ccdb83be828da63af71ab87b3 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 29 Jun 2018 17:51:26 +0200 Subject: alx: take rtnl before calling __alx_open from resume The __alx_open function can be called from ndo_open, which is called under RTNL, or from alx_resume, which isn't. Since commit d768319cd427, we're calling the netif_set_real_num_{tx,rx}_queues functions, which need to be called under RTNL. This is similar to commit 0c2cc02e571a ("igb: Move the calls to set the Tx and Rx queues into igb_open"). Fixes: d768319cd427 ("alx: enable multiple tx queues") Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/alx/main.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c index 567ee54504bc..5e5022fa1d04 100644 --- a/drivers/net/ethernet/atheros/alx/main.c +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -1897,13 +1897,19 @@ static int alx_resume(struct device *dev) struct pci_dev *pdev = to_pci_dev(dev); struct alx_priv *alx = pci_get_drvdata(pdev); struct alx_hw *hw = &alx->hw; + int err; alx_reset_phy(hw); if (!netif_running(alx->dev)) return 0; netif_device_attach(alx->dev); - return __alx_open(alx, true); + + rtnl_lock(); + err = __alx_open(alx, true); + rtnl_unlock(); + + return err; } static SIMPLE_DEV_PM_OPS(alx_pm_ops, alx_suspend, alx_resume); -- cgit v1.2.3 From 4664610537d398d55be19432f9cd9c29c831e159 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 29 Jun 2018 19:45:50 +0200 Subject: Revert "s390/qeth: use Read device to query hypervisor for MAC" This reverts commit b7493e91c11a757cf0f8ab26989642ee4bb2c642. On its own, querying RDEV for a MAC address works fine. But when upgrading from a qeth that previously queried DDEV on a z/VM NIC (ie. any kernel with commit ec61bd2fd2a2), the RDEV query now returns a _different_ MAC address than the DDEV query. If the NIC is configured with MACPROTECT, z/VM apparently requires us to use the MAC that was initially returned (on DDEV) and registered. So after upgrading to a kernel that uses RDEV, the SETVMAC registration cmd for the new MAC address fails and we end up with a non-operabel interface. To avoid regressions on upgrade, switch back to using DDEV for the MAC address query. The downgrade path (first RDEV, later DDEV) is fine, in this case both queries return the same MAC address. Fixes: b7493e91c11a ("s390/qeth: use Read device to query hypervisor for MAC") Reported-by: Michal Kubecek Tested-by: Karsten Graul Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 8e1474f1ffac..9d9182ed8ac4 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -4834,7 +4834,7 @@ int qeth_vm_request_mac(struct qeth_card *card) goto out; } - ccw_device_get_id(CARD_RDEV(card), &id); + ccw_device_get_id(CARD_DDEV(card), &id); request->resp_buf_len = sizeof(*response); request->resp_version = DIAG26C_VERSION2; request->op_code = DIAG26C_GET_MAC; -- cgit v1.2.3 From 4789a21880488048105590049fc41a99f53d565d Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 29 Jun 2018 19:45:51 +0200 Subject: s390/qeth: fix race when setting MAC address When qeth_l2_set_mac_address() finds the card in a non-reachable state, it merely copies the new MAC address into dev->dev_addr so that __qeth_l2_set_online() can later register it with the HW. But __qeth_l2_set_online() may very well be running concurrently, so we can't trust the card state without appropriate locking: If the online sequence is past the point where it registers dev->dev_addr (but not yet in SOFTSETUP state), any address change needs to be properly programmed into the HW. Otherwise the netdevice ends up with a different MAC address than what's set in the HW, and inbound traffic is not forwarded as expected. This is most likely to occur for OSD in LPAR, where commit 21b1702af12e ("s390/qeth: improve fallback to random MAC address") now triggers eg. systemd to immediately change the MAC when the netdevice is registered with a NET_ADDR_RANDOM address. Fixes: bcacfcbc82b4 ("s390/qeth: fix MAC address update sequence") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l2_main.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index a7cb37da6a21..7daf125dae76 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -501,27 +501,34 @@ static int qeth_l2_set_mac_address(struct net_device *dev, void *p) return -ERESTARTSYS; } + /* avoid racing against concurrent state change: */ + if (!mutex_trylock(&card->conf_mutex)) + return -EAGAIN; + if (!qeth_card_hw_is_reachable(card)) { ether_addr_copy(dev->dev_addr, addr->sa_data); - return 0; + goto out_unlock; } /* don't register the same address twice */ if (ether_addr_equal_64bits(dev->dev_addr, addr->sa_data) && (card->info.mac_bits & QETH_LAYER2_MAC_REGISTERED)) - return 0; + goto out_unlock; /* add the new address, switch over, drop the old */ rc = qeth_l2_send_setmac(card, addr->sa_data); if (rc) - return rc; + goto out_unlock; ether_addr_copy(old_addr, dev->dev_addr); ether_addr_copy(dev->dev_addr, addr->sa_data); if (card->info.mac_bits & QETH_LAYER2_MAC_REGISTERED) qeth_l2_remove_mac(card, old_addr); card->info.mac_bits |= QETH_LAYER2_MAC_REGISTERED; - return 0; + +out_unlock: + mutex_unlock(&card->conf_mutex); + return rc; } static void qeth_promisc_to_bridge(struct qeth_card *card) -- cgit v1.2.3 From 9d0a58fb9747afd27d490c02a97889a1b59f6be4 Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Fri, 29 Jun 2018 19:45:52 +0200 Subject: s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6] *ether_addr*_64bits functions have been introduced to optimize performance critical paths, which access 6-byte ethernet address as u64 value to get "nice" assembly. A harmless hack works nicely on ethernet addresses shoved into a structure or a larger buffer, until busted by Kasan on smth like plain (u8 *)[6]. qeth_l2_set_mac_address calls qeth_l2_remove_mac passing u8 old_addr[ETH_ALEN] as an argument. Adding/removing macs for an ethernet adapter is not that performance critical. Moreover is_multicast_ether_addr_64bits itself on s390 is not faster than is_multicast_ether_addr: is_multicast_ether_addr(%r2) -> %r2 llc %r2,0(%r2) risbg %r2,%r2,63,191,0 is_multicast_ether_addr_64bits(%r2) -> %r2 llgc %r2,0(%r2) risbg %r2,%r2,63,191,0 So, let's just use is_multicast_ether_addr instead of is_multicast_ether_addr_64bits. Fixes: bcacfcbc82b4 ("s390/qeth: fix MAC address update sequence") Reviewed-by: Julian Wiedmann Signed-off-by: Vasily Gorbik Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l2_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 7daf125dae76..5464515b71f1 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -140,7 +140,7 @@ static int qeth_l2_send_setmac(struct qeth_card *card, __u8 *mac) static int qeth_l2_write_mac(struct qeth_card *card, u8 *mac) { - enum qeth_ipa_cmds cmd = is_multicast_ether_addr_64bits(mac) ? + enum qeth_ipa_cmds cmd = is_multicast_ether_addr(mac) ? IPA_CMD_SETGMAC : IPA_CMD_SETVMAC; int rc; @@ -157,7 +157,7 @@ static int qeth_l2_write_mac(struct qeth_card *card, u8 *mac) static int qeth_l2_remove_mac(struct qeth_card *card, u8 *mac) { - enum qeth_ipa_cmds cmd = is_multicast_ether_addr_64bits(mac) ? + enum qeth_ipa_cmds cmd = is_multicast_ether_addr(mac) ? IPA_CMD_DELGMAC : IPA_CMD_DELVMAC; int rc; -- cgit v1.2.3 From ce28867fd20c23cd769e78b4d619c4755bf71a1c Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 29 Jun 2018 19:45:53 +0200 Subject: s390/qeth: don't clobber buffer on async TX completion If qeth_qdio_output_handler() detects that a transmit requires async completion, it replaces the pending buffer's metadata object (qeth_qdio_out_buffer) so that this queue buffer can be re-used while the data is pending completion. Later when the CQ indicates async completion of such a metadata object, qeth_qdio_cq_handler() tries to free any data associated with this object (since HW has now completed the transfer). By calling qeth_clear_output_buffer(), it erronously operates on the queue buffer that _previously_ belonged to this transfer ... but which has been potentially re-used several times by now. This results in double-free's of the buffer's data, and failing transmits as the buffer descriptor is scrubbed in mid-air. The correct way of handling this situation is to 1. scrub the queue buffer when it is prepared for re-use, and 2. later obtain the data addresses from the async-completion notifier (ie. the AOB), instead of the queue buffer. All this only affects qeth devices used for af_iucv HiperTransport. Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 11 +++++++++++ drivers/s390/net/qeth_core_main.c | 22 ++++++++++++++++------ 2 files changed, 27 insertions(+), 6 deletions(-) diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 2a5fec55bf60..940fd7b558d3 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -829,6 +829,17 @@ struct qeth_trap_id { /*some helper functions*/ #define QETH_CARD_IFNAME(card) (((card)->dev)? (card)->dev->name : "") +static inline void qeth_scrub_qdio_buffer(struct qdio_buffer *buf, + unsigned int elements) +{ + unsigned int i; + + for (i = 0; i < elements; i++) + memset(&buf->element[i], 0, sizeof(struct qdio_buffer_element)); + buf->element[14].sflags = 0; + buf->element[15].sflags = 0; +} + /** * qeth_get_elements_for_range() - find number of SBALEs to cover range. * @start: Start of the address range. diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 9d9182ed8ac4..d20a69a3bc40 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -73,9 +73,6 @@ static void qeth_notify_skbs(struct qeth_qdio_out_q *queue, struct qeth_qdio_out_buffer *buf, enum iucv_tx_notify notification); static void qeth_release_skbs(struct qeth_qdio_out_buffer *buf); -static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue, - struct qeth_qdio_out_buffer *buf, - enum qeth_qdio_buffer_states newbufstate); static int qeth_init_qdio_out_buf(struct qeth_qdio_out_q *, int); struct workqueue_struct *qeth_wq; @@ -489,6 +486,7 @@ static void qeth_qdio_handle_aob(struct qeth_card *card, struct qaob *aob; struct qeth_qdio_out_buffer *buffer; enum iucv_tx_notify notification; + unsigned int i; aob = (struct qaob *) phys_to_virt(phys_aob_addr); QETH_CARD_TEXT(card, 5, "haob"); @@ -513,10 +511,18 @@ static void qeth_qdio_handle_aob(struct qeth_card *card, qeth_notify_skbs(buffer->q, buffer, notification); buffer->aob = NULL; - qeth_clear_output_buffer(buffer->q, buffer, - QETH_QDIO_BUF_HANDLED_DELAYED); + /* Free dangling allocations. The attached skbs are handled by + * qeth_cleanup_handled_pending(). + */ + for (i = 0; + i < aob->sb_count && i < QETH_MAX_BUFFER_ELEMENTS(card); + i++) { + if (aob->sba[i] && buffer->is_header[i]) + kmem_cache_free(qeth_core_header_cache, + (void *) aob->sba[i]); + } + atomic_set(&buffer->state, QETH_QDIO_BUF_HANDLED_DELAYED); - /* from here on: do not touch buffer anymore */ qdio_release_aob(aob); } @@ -3759,6 +3765,10 @@ static void qeth_qdio_output_handler(struct ccw_device *ccwdev, QETH_CARD_TEXT(queue->card, 5, "aob"); QETH_CARD_TEXT_(queue->card, 5, "%lx", virt_to_phys(buffer->aob)); + + /* prepare the queue slot for re-use: */ + qeth_scrub_qdio_buffer(buffer->buffer, + QETH_MAX_BUFFER_ELEMENTS(card)); if (qeth_init_qdio_out_buf(queue, bidx)) { QETH_CARD_TEXT(card, 2, "outofbuf"); qeth_schedule_recovery(card); -- cgit v1.2.3 From d025da9eb1e48d3e5f2a2ff13ac5ac536ba4be43 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 29 Jun 2018 19:45:54 +0200 Subject: s390/qeth: consistently re-enable device features commit e830baa9c3f0 ("qeth: restore device features after recovery") and commit ce3443564145 ("s390/qeth: rely on kernel for feature recovery") made sure that the HW functions for device features get re-programmed after recovery. But we missed that the same handling is also required when a card is first set offline (destroying all HW context), and then online again. Fix this by moving the re-enable action out of the recovery-only path. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 2 +- drivers/s390/net/qeth_core_main.c | 23 +++++++++++------------ drivers/s390/net/qeth_l2_main.c | 5 ++--- drivers/s390/net/qeth_l3_main.c | 3 ++- 4 files changed, 16 insertions(+), 17 deletions(-) diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 940fd7b558d3..a246a618f9a4 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -1040,7 +1040,7 @@ struct qeth_cmd_buffer *qeth_get_setassparms_cmd(struct qeth_card *, __u16, __u16, enum qeth_prot_versions); int qeth_set_features(struct net_device *, netdev_features_t); -void qeth_recover_features(struct net_device *dev); +void qeth_enable_hw_features(struct net_device *dev); netdev_features_t qeth_fix_features(struct net_device *, netdev_features_t); netdev_features_t qeth_features_check(struct sk_buff *skb, struct net_device *dev, diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index d20a69a3bc40..d01ac29fd986 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -6469,28 +6469,27 @@ static int qeth_set_ipa_rx_csum(struct qeth_card *card, bool on) #define QETH_HW_FEATURES (NETIF_F_RXCSUM | NETIF_F_IP_CSUM | NETIF_F_TSO | \ NETIF_F_IPV6_CSUM) /** - * qeth_recover_features() - Restore device features after recovery - * @dev: the recovering net_device - * - * Caller must hold rtnl lock. + * qeth_enable_hw_features() - (Re-)Enable HW functions for device features + * @dev: a net_device */ -void qeth_recover_features(struct net_device *dev) +void qeth_enable_hw_features(struct net_device *dev) { - netdev_features_t features = dev->features; struct qeth_card *card = dev->ml_priv; + netdev_features_t features; + rtnl_lock(); + features = dev->features; /* force-off any feature that needs an IPA sequence. * netdev_update_features() will restart them. */ dev->features &= ~QETH_HW_FEATURES; netdev_update_features(dev); - - if (features == dev->features) - return; - dev_warn(&card->gdev->dev, - "Device recovery failed to restore all offload features\n"); + if (features != dev->features) + dev_warn(&card->gdev->dev, + "Device recovery failed to restore all offload features\n"); + rtnl_unlock(); } -EXPORT_SYMBOL_GPL(qeth_recover_features); +EXPORT_SYMBOL_GPL(qeth_enable_hw_features); int qeth_set_features(struct net_device *dev, netdev_features_t features) { diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 5464515b71f1..2487f0aeb165 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -1119,6 +1119,8 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode) netif_carrier_off(card->dev); qeth_set_allowed_threads(card, 0xffffffff, 0); + + qeth_enable_hw_features(card->dev); if (recover_flag == CARD_STATE_RECOVER) { if (recovery_mode && card->info.type != QETH_CARD_TYPE_OSN) { @@ -1130,9 +1132,6 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode) } /* this also sets saved unicast addresses */ qeth_l2_set_rx_mode(card->dev); - rtnl_lock(); - qeth_recover_features(card->dev); - rtnl_unlock(); } /* let user_space know that device is online */ kobject_uevent(&gdev->dev.kobj, KOBJ_CHANGE); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index e7fa479adf47..5905dc63e256 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2662,6 +2662,8 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode) netif_carrier_on(card->dev); else netif_carrier_off(card->dev); + + qeth_enable_hw_features(card->dev); if (recover_flag == CARD_STATE_RECOVER) { rtnl_lock(); if (recovery_mode) @@ -2669,7 +2671,6 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode) else dev_open(card->dev); qeth_l3_set_rx_mode(card->dev); - qeth_recover_features(card->dev); rtnl_unlock(); } qeth_trace_features(card); -- cgit v1.2.3 From ced9e191501e52b95e1b57b8e0db00943869eed0 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Fri, 29 Jun 2018 13:28:07 -0500 Subject: atm: zatm: Fix potential Spectre v1 pool can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/atm/zatm.c:1491 zatm_ioctl() warn: potential spectre issue 'zatm_dev->pool_info' (local cap) Fix this by sanitizing pool before using it to index zatm_dev->pool_info Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Signed-off-by: Gustavo A. R. Silva Signed-off-by: David S. Miller --- drivers/atm/zatm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c index a8d2eb0ceb8d..2c288d1f42bb 100644 --- a/drivers/atm/zatm.c +++ b/drivers/atm/zatm.c @@ -1483,6 +1483,8 @@ static int zatm_ioctl(struct atm_dev *dev,unsigned int cmd,void __user *arg) return -EFAULT; if (pool < 0 || pool > ZATM_LAST_POOL) return -EINVAL; + pool = array_index_nospec(pool, + ZATM_LAST_POOL + 1); if (copy_from_user(&info, &((struct zatm_pool_req __user *) arg)->info, sizeof(info))) return -EFAULT; -- cgit v1.2.3 From 3f76df198288ceec92fc9eddecad1e73c52769b0 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Fri, 29 Jun 2018 13:42:48 -0700 Subject: net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN As noticed by Eric, we need to switch to the helper dev_change_tx_queue_len() for SIOCSIFTXQLEN call path too, otheriwse still miss dev_qdisc_change_tx_queue_len(). Fixes: 6a643ddb5624 ("net: introduce helper dev_change_tx_queue_len()") Reported-by: Eric Dumazet Signed-off-by: Cong Wang Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/dev_ioctl.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/net/core/dev_ioctl.c b/net/core/dev_ioctl.c index a04e1e88bf3a..50537ff961a7 100644 --- a/net/core/dev_ioctl.c +++ b/net/core/dev_ioctl.c @@ -285,16 +285,9 @@ static int dev_ifsioc(struct net *net, struct ifreq *ifr, unsigned int cmd) if (ifr->ifr_qlen < 0) return -EINVAL; if (dev->tx_queue_len ^ ifr->ifr_qlen) { - unsigned int orig_len = dev->tx_queue_len; - - dev->tx_queue_len = ifr->ifr_qlen; - err = call_netdevice_notifiers( - NETDEV_CHANGE_TX_QUEUE_LEN, dev); - err = notifier_to_errno(err); - if (err) { - dev->tx_queue_len = orig_len; + err = dev_change_tx_queue_len(dev, ifr->ifr_qlen); + if (err) return err; - } } return 0; -- cgit v1.2.3 From 3ffe64f1a641b80a82d9ef4efa7a05ce69049871 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 29 Jun 2018 14:07:16 -0700 Subject: hv_netvsc: split sub-channel setup into async and sync When doing device hotplug the sub channel must be async to avoid deadlock issues because device is discovered in softirq context. When doing changes to MTU and number of channels, the setup must be synchronous to avoid races such as when MTU and device settings are done in a single ip command. Reported-by: Thomas Walker Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Fixes: 732e49850c5e ("netvsc: fix race on sub channel creation") Signed-off-by: Stephen Hemminger Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller --- drivers/net/hyperv/hyperv_net.h | 2 +- drivers/net/hyperv/netvsc.c | 37 +++++++++++++++++++++++- drivers/net/hyperv/netvsc_drv.c | 17 ++++++++++- drivers/net/hyperv/rndis_filter.c | 61 ++++++++------------------------------- 4 files changed, 65 insertions(+), 52 deletions(-) diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h index 1a924b867b07..4b6e308199d2 100644 --- a/drivers/net/hyperv/hyperv_net.h +++ b/drivers/net/hyperv/hyperv_net.h @@ -210,7 +210,7 @@ int netvsc_recv_callback(struct net_device *net, void netvsc_channel_cb(void *context); int netvsc_poll(struct napi_struct *napi, int budget); -void rndis_set_subchannel(struct work_struct *w); +int rndis_set_subchannel(struct net_device *ndev, struct netvsc_device *nvdev); int rndis_filter_open(struct netvsc_device *nvdev); int rndis_filter_close(struct netvsc_device *nvdev); struct netvsc_device *rndis_filter_device_add(struct hv_device *dev, diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 5d5bd513847f..8e9d0ee1572b 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -65,6 +65,41 @@ void netvsc_switch_datapath(struct net_device *ndev, bool vf) VM_PKT_DATA_INBAND, 0); } +/* Worker to setup sub channels on initial setup + * Initial hotplug event occurs in softirq context + * and can't wait for channels. + */ +static void netvsc_subchan_work(struct work_struct *w) +{ + struct netvsc_device *nvdev = + container_of(w, struct netvsc_device, subchan_work); + struct rndis_device *rdev; + int i, ret; + + /* Avoid deadlock with device removal already under RTNL */ + if (!rtnl_trylock()) { + schedule_work(w); + return; + } + + rdev = nvdev->extension; + if (rdev) { + ret = rndis_set_subchannel(rdev->ndev, nvdev); + if (ret == 0) { + netif_device_attach(rdev->ndev); + } else { + /* fallback to only primary channel */ + for (i = 1; i < nvdev->num_chn; i++) + netif_napi_del(&nvdev->chan_table[i].napi); + + nvdev->max_chn = 1; + nvdev->num_chn = 1; + } + } + + rtnl_unlock(); +} + static struct netvsc_device *alloc_net_device(void) { struct netvsc_device *net_device; @@ -81,7 +116,7 @@ static struct netvsc_device *alloc_net_device(void) init_completion(&net_device->channel_init_wait); init_waitqueue_head(&net_device->subchan_open); - INIT_WORK(&net_device->subchan_work, rndis_set_subchannel); + INIT_WORK(&net_device->subchan_work, netvsc_subchan_work); return net_device; } diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index fe2256bf1d13..dd1d6e115145 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -905,8 +905,20 @@ static int netvsc_attach(struct net_device *ndev, if (IS_ERR(nvdev)) return PTR_ERR(nvdev); - /* Note: enable and attach happen when sub-channels setup */ + if (nvdev->num_chn > 1) { + ret = rndis_set_subchannel(ndev, nvdev); + + /* if unavailable, just proceed with one queue */ + if (ret) { + nvdev->max_chn = 1; + nvdev->num_chn = 1; + } + } + + /* In any case device is now ready */ + netif_device_attach(ndev); + /* Note: enable and attach happen when sub-channels setup */ netif_carrier_off(ndev); if (netif_running(ndev)) { @@ -2089,6 +2101,9 @@ static int netvsc_probe(struct hv_device *dev, memcpy(net->dev_addr, device_info.mac_adr, ETH_ALEN); + if (nvdev->num_chn > 1) + schedule_work(&nvdev->subchan_work); + /* hw_features computed in rndis_netdev_set_hwcaps() */ net->features = net->hw_features | NETIF_F_HIGHDMA | NETIF_F_SG | diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c index 5428bb261102..9b4e3c3787e5 100644 --- a/drivers/net/hyperv/rndis_filter.c +++ b/drivers/net/hyperv/rndis_filter.c @@ -1062,29 +1062,15 @@ static void netvsc_sc_open(struct vmbus_channel *new_sc) * This breaks overlap of processing the host message for the * new primary channel with the initialization of sub-channels. */ -void rndis_set_subchannel(struct work_struct *w) +int rndis_set_subchannel(struct net_device *ndev, struct netvsc_device *nvdev) { - struct netvsc_device *nvdev - = container_of(w, struct netvsc_device, subchan_work); struct nvsp_message *init_packet = &nvdev->channel_init_pkt; - struct net_device_context *ndev_ctx; - struct rndis_device *rdev; - struct net_device *ndev; - struct hv_device *hv_dev; + struct net_device_context *ndev_ctx = netdev_priv(ndev); + struct hv_device *hv_dev = ndev_ctx->device_ctx; + struct rndis_device *rdev = nvdev->extension; int i, ret; - if (!rtnl_trylock()) { - schedule_work(w); - return; - } - - rdev = nvdev->extension; - if (!rdev) - goto unlock; /* device was removed */ - - ndev = rdev->ndev; - ndev_ctx = netdev_priv(ndev); - hv_dev = ndev_ctx->device_ctx; + ASSERT_RTNL(); memset(init_packet, 0, sizeof(struct nvsp_message)); init_packet->hdr.msg_type = NVSP_MSG5_TYPE_SUBCHANNEL; @@ -1100,13 +1086,13 @@ void rndis_set_subchannel(struct work_struct *w) VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); if (ret) { netdev_err(ndev, "sub channel allocate send failed: %d\n", ret); - goto failed; + return ret; } wait_for_completion(&nvdev->channel_init_wait); if (init_packet->msg.v5_msg.subchn_comp.status != NVSP_STAT_SUCCESS) { netdev_err(ndev, "sub channel request failed\n"); - goto failed; + return -EIO; } nvdev->num_chn = 1 + @@ -1125,21 +1111,7 @@ void rndis_set_subchannel(struct work_struct *w) for (i = 0; i < VRSS_SEND_TAB_SIZE; i++) ndev_ctx->tx_table[i] = i % nvdev->num_chn; - netif_device_attach(ndev); - rtnl_unlock(); - return; - -failed: - /* fallback to only primary channel */ - for (i = 1; i < nvdev->num_chn; i++) - netif_napi_del(&nvdev->chan_table[i].napi); - - nvdev->max_chn = 1; - nvdev->num_chn = 1; - - netif_device_attach(ndev); -unlock: - rtnl_unlock(); + return 0; } static int rndis_netdev_set_hwcaps(struct rndis_device *rndis_device, @@ -1360,21 +1332,12 @@ struct netvsc_device *rndis_filter_device_add(struct hv_device *dev, netif_napi_add(net, &net_device->chan_table[i].napi, netvsc_poll, NAPI_POLL_WEIGHT); - if (net_device->num_chn > 1) - schedule_work(&net_device->subchan_work); + return net_device; out: - /* if unavailable, just proceed with one queue */ - if (ret) { - net_device->max_chn = 1; - net_device->num_chn = 1; - } - - /* No sub channels, device is ready */ - if (net_device->num_chn == 1) - netif_device_attach(net); - - return net_device; + /* setting up multiple channels failed */ + net_device->max_chn = 1; + net_device->num_chn = 1; err_dev_remv: rndis_filter_device_remove(dev, net_device); -- cgit v1.2.3 From 35e8c7ba0863acadd4b9badd09740af7a8331125 Mon Sep 17 00:00:00 2001 From: Roopa Prabhu Date: Fri, 29 Jun 2018 14:32:15 -0700 Subject: net: fib_rules: bring back rule_exists to match rule during add After commit f9d4b0c1e969 ("fib_rules: move common handling of newrule delrule msgs into fib_nl2rule"), rule_exists got replaced by rule_find for existing rule lookup in both the add and del paths. While this is good for the delete path, it solves a few problems but opens up a few invalid key matches in the add path. $ip -4 rule add table main tos 10 fwmark 1 $ip -4 rule add table main tos 10 RTNETLINK answers: File exists The problem here is rule_find does not check if the key masks in the new and old rule are the same and hence ends up matching a more secific rule. Rule key masks cannot be easily compared today without an elaborate if-else block. Its best to introduce key masks for easier and accurate rule comparison in the future. Until then, due to fear of regressions this patch re-introduces older loose rule_exists during add. Also fixes both rule_exists and rule_find to cover missing attributes. Fixes: f9d4b0c1e969 ("fib_rules: move common handling of newrule delrule msgs into fib_nl2rule") Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller --- net/core/fib_rules.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 71 insertions(+), 1 deletion(-) diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c index bc8425d81022..f64aa13811ea 100644 --- a/net/core/fib_rules.c +++ b/net/core/fib_rules.c @@ -444,6 +444,9 @@ static struct fib_rule *rule_find(struct fib_rules_ops *ops, if (rule->ip_proto && r->ip_proto != rule->ip_proto) continue; + if (rule->proto && r->proto != rule->proto) + continue; + if (fib_rule_port_range_set(&rule->sport_range) && !fib_rule_port_range_compare(&r->sport_range, &rule->sport_range)) @@ -653,6 +656,73 @@ errout: return err; } +static int rule_exists(struct fib_rules_ops *ops, struct fib_rule_hdr *frh, + struct nlattr **tb, struct fib_rule *rule) +{ + struct fib_rule *r; + + list_for_each_entry(r, &ops->rules_list, list) { + if (r->action != rule->action) + continue; + + if (r->table != rule->table) + continue; + + if (r->pref != rule->pref) + continue; + + if (memcmp(r->iifname, rule->iifname, IFNAMSIZ)) + continue; + + if (memcmp(r->oifname, rule->oifname, IFNAMSIZ)) + continue; + + if (r->mark != rule->mark) + continue; + + if (r->suppress_ifgroup != rule->suppress_ifgroup) + continue; + + if (r->suppress_prefixlen != rule->suppress_prefixlen) + continue; + + if (r->mark_mask != rule->mark_mask) + continue; + + if (r->tun_id != rule->tun_id) + continue; + + if (r->fr_net != rule->fr_net) + continue; + + if (r->l3mdev != rule->l3mdev) + continue; + + if (!uid_eq(r->uid_range.start, rule->uid_range.start) || + !uid_eq(r->uid_range.end, rule->uid_range.end)) + continue; + + if (r->ip_proto != rule->ip_proto) + continue; + + if (r->proto != rule->proto) + continue; + + if (!fib_rule_port_range_compare(&r->sport_range, + &rule->sport_range)) + continue; + + if (!fib_rule_port_range_compare(&r->dport_range, + &rule->dport_range)) + continue; + + if (!ops->compare(r, frh, tb)) + continue; + return 1; + } + return 0; +} + int fib_nl_newrule(struct sk_buff *skb, struct nlmsghdr *nlh, struct netlink_ext_ack *extack) { @@ -687,7 +757,7 @@ int fib_nl_newrule(struct sk_buff *skb, struct nlmsghdr *nlh, goto errout; if ((nlh->nlmsg_flags & NLM_F_EXCL) && - rule_find(ops, frh, tb, rule, user_priority)) { + rule_exists(ops, frh, tb, rule)) { err = -EEXIST; goto errout_free; } -- cgit v1.2.3 From c1985cefd844e26bd19673a6df8d8f0b1918c2db Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Thu, 28 Jun 2018 09:56:55 -0700 Subject: acpi/nfit: fix cmd_rc for acpi_nfit_ctl to always return a value cmd_rc is passed in by reference to the acpi_nfit_ctl() function and the caller expects a value returned. However, when the package is pass through via the ND_CMD_CALL command, cmd_rc is not touched. Make sure cmd_rc is always set. Fixes: aef253382266 ("libnvdimm, nfit: centralize command status translation") Signed-off-by: Dave Jiang Signed-off-by: Dan Williams --- drivers/acpi/nfit/core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c index d15814e1727f..471402cee1f1 100644 --- a/drivers/acpi/nfit/core.c +++ b/drivers/acpi/nfit/core.c @@ -408,6 +408,7 @@ int acpi_nfit_ctl(struct nvdimm_bus_descriptor *nd_desc, struct nvdimm *nvdimm, const guid_t *guid; int rc, i; + *cmd_rc = -EINVAL; func = cmd; if (cmd == ND_CMD_CALL) { call_pkg = buf; @@ -518,6 +519,7 @@ int acpi_nfit_ctl(struct nvdimm_bus_descriptor *nd_desc, struct nvdimm *nvdimm, * If we return an error (like elsewhere) then caller wouldn't * be able to rely upon data returned to make calculation. */ + *cmd_rc = 0; return 0; } -- cgit v1.2.3 From 1273c253c32b9a073a4d8921ed079177ccc7c8af Mon Sep 17 00:00:00 2001 From: Vishal Verma Date: Mon, 18 Jun 2018 17:17:02 -0600 Subject: tools/testing/nvdimm: advertise a write cache for nfit_test Commit 546eb0317cfa "libnvdimm, pmem: Do not flush power-fail protected CPU caches" fixed the write_cache detection to correctly show the lack of a write cache based on the platform capabilities described in the ACPI NFIT. The nfit_test unit tests expected a write cache to be present, so change the nfit test namespaces to only advertise a persistence domain limited to the memory controller. This allows the kernel to show a write_cache attribute, and the test behaviour remains unchanged. Signed-off-by: Vishal Verma Reviewed-by: Ross Zwisler Signed-off-by: Dan Williams --- tools/testing/nvdimm/test/nfit.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/tools/testing/nvdimm/test/nfit.c b/tools/testing/nvdimm/test/nfit.c index a8fb63edcf89..e2926f72a821 100644 --- a/tools/testing/nvdimm/test/nfit.c +++ b/tools/testing/nvdimm/test/nfit.c @@ -1991,8 +1991,7 @@ static void nfit_test0_setup(struct nfit_test *t) pcap->header.type = ACPI_NFIT_TYPE_CAPABILITIES; pcap->header.length = sizeof(*pcap); pcap->highest_capability = 1; - pcap->capabilities = ACPI_NFIT_CAPABILITY_CACHE_FLUSH | - ACPI_NFIT_CAPABILITY_MEM_FLUSH; + pcap->capabilities = ACPI_NFIT_CAPABILITY_MEM_FLUSH; offset += pcap->header.length; if (t->setup_hotplug) { -- cgit v1.2.3 From bb94b55af3461e26b32f0e23d455abeae0cfca5d Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Fri, 29 Jun 2018 11:31:50 -0600 Subject: vfio: Use get_user_pages_longterm correctly The patch noted in the fixes below converted get_user_pages_fast() to get_user_pages_longterm(), however the two calls differ in a few ways. First _fast() is documented to not require the mmap_sem, while _longterm() is documented to need it. Hold the mmap sem as required. Second, _fast accepts an 'int write' while _longterm uses 'unsigned int gup_flags', so the expression '!!(prot & IOMMU_WRITE)' is only working by luck as FOLL_WRITE is currently == 0x1. Use the expected FOLL_WRITE constant instead. Fixes: 94db151dc892 ("vfio: disable filesystem-dax page pinning") Cc: Signed-off-by: Jason Gunthorpe Acked-by: Dan Williams Signed-off-by: Alex Williamson --- drivers/vfio/vfio_iommu_type1.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c index 2c75b33db4ac..3e5b17710a4f 100644 --- a/drivers/vfio/vfio_iommu_type1.c +++ b/drivers/vfio/vfio_iommu_type1.c @@ -343,18 +343,16 @@ static int vaddr_get_pfn(struct mm_struct *mm, unsigned long vaddr, struct page *page[1]; struct vm_area_struct *vma; struct vm_area_struct *vmas[1]; + unsigned int flags = 0; int ret; + if (prot & IOMMU_WRITE) + flags |= FOLL_WRITE; + + down_read(&mm->mmap_sem); if (mm == current->mm) { - ret = get_user_pages_longterm(vaddr, 1, !!(prot & IOMMU_WRITE), - page, vmas); + ret = get_user_pages_longterm(vaddr, 1, flags, page, vmas); } else { - unsigned int flags = 0; - - if (prot & IOMMU_WRITE) - flags |= FOLL_WRITE; - - down_read(&mm->mmap_sem); ret = get_user_pages_remote(NULL, mm, vaddr, 1, flags, page, vmas, NULL); /* @@ -368,8 +366,8 @@ static int vaddr_get_pfn(struct mm_struct *mm, unsigned long vaddr, ret = -EOPNOTSUPP; put_page(page[0]); } - up_read(&mm->mmap_sem); } + up_read(&mm->mmap_sem); if (ret == 1) { *pfn = page_to_pfn(page[0]); -- cgit v1.2.3 From 26112ddc254c98681b224aa9ededefc01b6e02d2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 30 Jun 2018 23:19:33 +0200 Subject: PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM It is reported that commit c62ec4610c40 (PM / core: Fix direct_complete handling for devices with no callbacks) introduced a system suspend regression on Samsung 305V4A by allowing a PCI bridge (not a PCIe port) to stay in D3 over suspend-to-RAM, which is a side effect of setting power.direct_complete for the children of that bridge that have no PM callbacks. On the majority of systems PCI bridges are not allowed to be runtime-suspended (the power/control sysfs attribute is set to "on" for them by default), but user space can change that setting and if it does so and a given bridge has no children with PM callbacks, the direct_complete optimization will be applied to it and it will stay in suspend over system suspend. Apparently, that confuses the platform firmware on the affected machine and that may very well happen elsewhere, so avoid the direct_complete optimization for PCI bridges with no drivers (if there is a driver, it should take care of the PM handling) on suspend-to-RAM altogether (that should not matter for suspend-to-idle as platform firmware is not involved in it). Fixes: c62ec4610c40 (PM / core: Fix direct_complete handling for devices with no callbacks) Link: https://bugzilla.kernel.org/show_bug.cgi?id=199941 Reported-by: n0000b.n000b@gmail.com Tested-by: n0000b.n000b@gmail.com Reviewed-by: Mika Westerberg Acked-by: Bjorn Helgaas Cc: 4.15+ # 4.15+ Signed-off-by: Rafael J. Wysocki --- drivers/pci/pci-acpi.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 65113b6eed14..89ee6a2b6eb8 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -629,6 +629,18 @@ static bool acpi_pci_need_resume(struct pci_dev *dev) { struct acpi_device *adev = ACPI_COMPANION(&dev->dev); + /* + * In some cases (eg. Samsung 305V4A) leaving a bridge in suspend over + * system-wide suspend/resume confuses the platform firmware, so avoid + * doing that, unless the bridge has a driver that should take care of + * the PM handling. According to Section 16.1.6 of ACPI 6.2, endpoint + * devices are expected to be in D3 before invoking the S3 entry path + * from the firmware, so they should not be affected by this issue. + */ + if (pci_is_bridge(dev) && !dev->driver && + acpi_target_system_state() != ACPI_STATE_S0) + return true; + if (!adev || !acpi_device_power_manageable(adev)) return false; -- cgit v1.2.3 From a0d5f3b69af7733f3173a8e19d51f68a08017c76 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 30 Jun 2018 23:24:04 +0200 Subject: ACPICA: Drop leading newlines from error messages MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 5088814a6e93 (ACPICA: AML parser: attempt to continue loading table after error) unintentionally added leading newlines to error messages emitted by ACPICA which caused unexpected things to be printed to the kernel log. Drop these newlines (which effectively reverts the part of commit 5088814a6e93 adding them). Fixes: 5088814a6e93 (ACPICA: AML parser: attempt to continue loading table after error) Reported-by: Toralf Förster Reported-by: Guenter Roeck Cc: 4.17+ # 4.17+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/uterror.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/acpica/uterror.c b/drivers/acpi/acpica/uterror.c index 5a64ddaed8a3..e47430272692 100644 --- a/drivers/acpi/acpica/uterror.c +++ b/drivers/acpi/acpica/uterror.c @@ -182,19 +182,19 @@ acpi_ut_prefixed_namespace_error(const char *module_name, switch (lookup_status) { case AE_ALREADY_EXISTS: - acpi_os_printf("\n" ACPI_MSG_BIOS_ERROR); + acpi_os_printf(ACPI_MSG_BIOS_ERROR); message = "Failure creating"; break; case AE_NOT_FOUND: - acpi_os_printf("\n" ACPI_MSG_BIOS_ERROR); + acpi_os_printf(ACPI_MSG_BIOS_ERROR); message = "Could not resolve"; break; default: - acpi_os_printf("\n" ACPI_MSG_ERROR); + acpi_os_printf(ACPI_MSG_ERROR); message = "Failure resolving"; break; } -- cgit v1.2.3 From 9901c5d77e969d8215a8e8d087ef02e6feddc84c Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sat, 30 Jun 2018 06:17:36 -0700 Subject: bpf: sockmap, fix crash when ipv6 sock is added This fixes a crash where we assign tcp_prot to IPv6 sockets instead of tcpv6_prot. Previously we overwrote the sk->prot field with tcp_prot even in the AF_INET6 case. This patch ensures the correct tcp_prot and tcpv6_prot are used. Tested with 'netserver -6' and 'netperf -H [IPv6]' as well as 'netperf -H [IPv4]'. The ESTABLISHED check resolves the previously crashing case here. Fixes: 174a79ff9515 ("bpf: sockmap with sk redirect support") Reported-by: syzbot+5c063698bdbfac19f363@syzkaller.appspotmail.com Acked-by: Martin KaFai Lau Signed-off-by: John Fastabend Signed-off-by: Wei Wang Signed-off-by: Daniel Borkmann --- kernel/bpf/sockmap.c | 58 +++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 48 insertions(+), 10 deletions(-) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index 81d0c55a77aa..bfdfbd199c3b 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -140,6 +140,7 @@ static int bpf_tcp_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, static int bpf_tcp_sendmsg(struct sock *sk, struct msghdr *msg, size_t size); static int bpf_tcp_sendpage(struct sock *sk, struct page *page, int offset, size_t size, int flags); +static void bpf_tcp_close(struct sock *sk, long timeout); static inline struct smap_psock *smap_psock_sk(const struct sock *sk) { @@ -161,7 +162,42 @@ out: return !empty; } -static struct proto tcp_bpf_proto; +enum { + SOCKMAP_IPV4, + SOCKMAP_IPV6, + SOCKMAP_NUM_PROTS, +}; + +enum { + SOCKMAP_BASE, + SOCKMAP_TX, + SOCKMAP_NUM_CONFIGS, +}; + +static struct proto *saved_tcpv6_prot __read_mostly; +static DEFINE_SPINLOCK(tcpv6_prot_lock); +static struct proto bpf_tcp_prots[SOCKMAP_NUM_PROTS][SOCKMAP_NUM_CONFIGS]; +static void build_protos(struct proto prot[SOCKMAP_NUM_CONFIGS], + struct proto *base) +{ + prot[SOCKMAP_BASE] = *base; + prot[SOCKMAP_BASE].close = bpf_tcp_close; + prot[SOCKMAP_BASE].recvmsg = bpf_tcp_recvmsg; + prot[SOCKMAP_BASE].stream_memory_read = bpf_tcp_stream_read; + + prot[SOCKMAP_TX] = prot[SOCKMAP_BASE]; + prot[SOCKMAP_TX].sendmsg = bpf_tcp_sendmsg; + prot[SOCKMAP_TX].sendpage = bpf_tcp_sendpage; +} + +static void update_sk_prot(struct sock *sk, struct smap_psock *psock) +{ + int family = sk->sk_family == AF_INET6 ? SOCKMAP_IPV6 : SOCKMAP_IPV4; + int conf = psock->bpf_tx_msg ? SOCKMAP_TX : SOCKMAP_BASE; + + sk->sk_prot = &bpf_tcp_prots[family][conf]; +} + static int bpf_tcp_init(struct sock *sk) { struct smap_psock *psock; @@ -181,14 +217,17 @@ static int bpf_tcp_init(struct sock *sk) psock->save_close = sk->sk_prot->close; psock->sk_proto = sk->sk_prot; - if (psock->bpf_tx_msg) { - tcp_bpf_proto.sendmsg = bpf_tcp_sendmsg; - tcp_bpf_proto.sendpage = bpf_tcp_sendpage; - tcp_bpf_proto.recvmsg = bpf_tcp_recvmsg; - tcp_bpf_proto.stream_memory_read = bpf_tcp_stream_read; + /* Build IPv6 sockmap whenever the address of tcpv6_prot changes */ + if (sk->sk_family == AF_INET6 && + unlikely(sk->sk_prot != smp_load_acquire(&saved_tcpv6_prot))) { + spin_lock_bh(&tcpv6_prot_lock); + if (likely(sk->sk_prot != saved_tcpv6_prot)) { + build_protos(bpf_tcp_prots[SOCKMAP_IPV6], sk->sk_prot); + smp_store_release(&saved_tcpv6_prot, sk->sk_prot); + } + spin_unlock_bh(&tcpv6_prot_lock); } - - sk->sk_prot = &tcp_bpf_proto; + update_sk_prot(sk, psock); rcu_read_unlock(); return 0; } @@ -1111,8 +1150,7 @@ static void bpf_tcp_msg_add(struct smap_psock *psock, static int bpf_tcp_ulp_register(void) { - tcp_bpf_proto = tcp_prot; - tcp_bpf_proto.close = bpf_tcp_close; + build_protos(bpf_tcp_prots[SOCKMAP_IPV4], &tcp_prot); /* Once BPF TX ULP is registered it is never unregistered. It * will be in the ULP list for the lifetime of the system. Doing * duplicate registers is not a problem. -- cgit v1.2.3 From 54fedb42c6537dcb0102e4a58a88456a6286999d Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sat, 30 Jun 2018 06:17:41 -0700 Subject: bpf: sockmap, fix smap_list_map_remove when psock is in many maps If a hashmap is free'd with open socks it removes the reference to the hash entry from the psock. If that is the last reference to the psock then it will also be free'd by the reference counting logic. However the current logic that removes the hash reference from the list of references is broken. In smap_list_remove() we first check if the sockmap entry matches and then check if the hashmap entry matches. But, the sockmap entry sill always match because its NULL in this case which causes the first entry to be removed from the list. If this is always the "right" entry (because the user adds/removes entries in order) then everything is OK but otherwise a subsequent bpf_tcp_close() may reference a free'd object. To fix this create two list handlers one for sockmap and one for sockhash. Reported-by: syzbot+0ce137753c78f7b6acc1@syzkaller.appspotmail.com Fixes: 81110384441a ("bpf: sockmap, add hash map support") Acked-by: Martin KaFai Lau Signed-off-by: John Fastabend Signed-off-by: Daniel Borkmann --- kernel/bpf/sockmap.c | 34 ++++++++++++++++++++++------------ 1 file changed, 22 insertions(+), 12 deletions(-) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index bfdfbd199c3b..65a937ed5762 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -1602,17 +1602,27 @@ free_stab: return ERR_PTR(err); } -static void smap_list_remove(struct smap_psock *psock, - struct sock **entry, - struct htab_elem *hash_link) +static void smap_list_map_remove(struct smap_psock *psock, + struct sock **entry) { struct smap_psock_map_entry *e, *tmp; list_for_each_entry_safe(e, tmp, &psock->maps, list) { - if (e->entry == entry || e->hash_link == hash_link) { + if (e->entry == entry) + list_del(&e->list); + } +} + +static void smap_list_hash_remove(struct smap_psock *psock, + struct htab_elem *hash_link) +{ + struct smap_psock_map_entry *e, *tmp; + + list_for_each_entry_safe(e, tmp, &psock->maps, list) { + struct htab_elem *c = e->hash_link; + + if (c == hash_link) list_del(&e->list); - break; - } } } @@ -1647,7 +1657,7 @@ static void sock_map_free(struct bpf_map *map) * to be null and queued for garbage collection. */ if (likely(psock)) { - smap_list_remove(psock, &stab->sock_map[i], NULL); + smap_list_map_remove(psock, &stab->sock_map[i]); smap_release_sock(psock, sock); } write_unlock_bh(&sock->sk_callback_lock); @@ -1706,7 +1716,7 @@ static int sock_map_delete_elem(struct bpf_map *map, void *key) if (psock->bpf_parse) smap_stop_sock(psock, sock); - smap_list_remove(psock, &stab->sock_map[k], NULL); + smap_list_map_remove(psock, &stab->sock_map[k]); smap_release_sock(psock, sock); out: write_unlock_bh(&sock->sk_callback_lock); @@ -1908,7 +1918,7 @@ static int sock_map_ctx_update_elem(struct bpf_sock_ops_kern *skops, struct smap_psock *opsock = smap_psock_sk(osock); write_lock_bh(&osock->sk_callback_lock); - smap_list_remove(opsock, &stab->sock_map[i], NULL); + smap_list_map_remove(opsock, &stab->sock_map[i]); smap_release_sock(opsock, osock); write_unlock_bh(&osock->sk_callback_lock); } @@ -2142,7 +2152,7 @@ static void sock_hash_free(struct bpf_map *map) * (psock) to be null and queued for garbage collection. */ if (likely(psock)) { - smap_list_remove(psock, NULL, l); + smap_list_hash_remove(psock, l); smap_release_sock(psock, sock); } write_unlock_bh(&sock->sk_callback_lock); @@ -2322,7 +2332,7 @@ static int sock_hash_ctx_update_elem(struct bpf_sock_ops_kern *skops, psock = smap_psock_sk(l_old->sk); hlist_del_rcu(&l_old->hash_node); - smap_list_remove(psock, NULL, l_old); + smap_list_hash_remove(psock, l_old); smap_release_sock(psock, l_old->sk); free_htab_elem(htab, l_old); } @@ -2390,7 +2400,7 @@ static int sock_hash_delete_elem(struct bpf_map *map, void *key) * to be null and queued for garbage collection. */ if (likely(psock)) { - smap_list_remove(psock, NULL, l); + smap_list_hash_remove(psock, l); smap_release_sock(psock, sock); } write_unlock_bh(&sock->sk_callback_lock); -- cgit v1.2.3 From e9db4ef6bf4ca9894bb324c76e01b8f1a16b2650 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sat, 30 Jun 2018 06:17:47 -0700 Subject: bpf: sockhash fix omitted bucket lock in sock_close First the sk_callback_lock() was being used to protect both the sock callback hooks and the psock->maps list. This got overly convoluted after the addition of sockhash (in sockmap it made some sense because masp and callbacks were tightly coupled) so lets split out a specific lock for maps and only use the callback lock for its intended purpose. This fixes a couple cases where we missed using maps lock when it was in fact needed. Also this makes it easier to follow the code because now we can put the locking closer to the actual code its serializing. Next, in sock_hash_delete_elem() the pattern was as follows, sock_hash_delete_elem() [...] spin_lock(bucket_lock) l = lookup_elem_raw() if (l) hlist_del_rcu() write_lock(sk_callback_lock) .... destroy psock ... write_unlock(sk_callback_lock) spin_unlock(bucket_lock) The ordering is necessary because we only know the {p}sock after dereferencing the hash table which we can't do unless we have the bucket lock held. Once we have the bucket lock and the psock element it is deleted from the hashmap to ensure any other path doing a lookup will fail. Finally, the refcnt is decremented and if zero the psock is destroyed. In parallel with the above (or free'ing the map) a tcp close event may trigger tcp_close(). Which at the moment omits the bucket lock altogether (oops!) where the flow looks like this, bpf_tcp_close() [...] write_lock(sk_callback_lock) for each psock->maps // list of maps this sock is part of hlist_del_rcu(ref_hash_node); .... destroy psock ... write_unlock(sk_callback_lock) Obviously, and demonstrated by syzbot, this is broken because we can have multiple threads deleting entries via hlist_del_rcu(). To fix this we might be tempted to wrap the hlist operation in a bucket lock but that would create a lock inversion problem. In summary to follow locking rules the psocks maps list needs the sk_callback_lock (after this patch maps_lock) but we need the bucket lock to do the hlist_del_rcu. To resolve the lock inversion problem pop the head of the maps list repeatedly and remove the reference until no more are left. If a delete happens in parallel from the BPF API that is OK as well because it will do a similar action, lookup the lock in the map/hash, delete it from the map/hash, and dec the refcnt. We check for this case before doing a destroy on the psock to ensure we don't have two threads tearing down a psock. The new logic is as follows, bpf_tcp_close() e = psock_map_pop(psock->maps) // done with map lock bucket_lock() // lock hash list bucket l = lookup_elem_raw(head, hash, key, key_size); if (l) { //only get here if elmnt was not already removed hlist_del_rcu() ... destroy psock... } bucket_unlock() And finally for all the above to work add missing locking around map operations per above. Then add RCU annotations and use rcu_dereference/rcu_assign_pointer to manage values relying on RCU so that the object is not free'd from sock_hash_free() while it is being referenced in bpf_tcp_close(). Reported-by: syzbot+0ce137753c78f7b6acc1@syzkaller.appspotmail.com Fixes: 81110384441a ("bpf: sockmap, add hash map support") Signed-off-by: John Fastabend Signed-off-by: Daniel Borkmann --- kernel/bpf/sockmap.c | 145 ++++++++++++++++++++++++++++++++++----------------- 1 file changed, 96 insertions(+), 49 deletions(-) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index 65a937ed5762..ac09b35a9567 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -72,6 +72,7 @@ struct bpf_htab { u32 n_buckets; u32 elem_size; struct bpf_sock_progs progs; + struct rcu_head rcu; }; struct htab_elem { @@ -89,8 +90,8 @@ enum smap_psock_state { struct smap_psock_map_entry { struct list_head list; struct sock **entry; - struct htab_elem *hash_link; - struct bpf_htab *htab; + struct htab_elem __rcu *hash_link; + struct bpf_htab __rcu *htab; }; struct smap_psock { @@ -120,6 +121,7 @@ struct smap_psock { struct bpf_prog *bpf_parse; struct bpf_prog *bpf_verdict; struct list_head maps; + spinlock_t maps_lock; /* Back reference used when sock callback trigger sockmap operations */ struct sock *sock; @@ -258,16 +260,54 @@ out: rcu_read_unlock(); } +static struct htab_elem *lookup_elem_raw(struct hlist_head *head, + u32 hash, void *key, u32 key_size) +{ + struct htab_elem *l; + + hlist_for_each_entry_rcu(l, head, hash_node) { + if (l->hash == hash && !memcmp(&l->key, key, key_size)) + return l; + } + + return NULL; +} + +static inline struct bucket *__select_bucket(struct bpf_htab *htab, u32 hash) +{ + return &htab->buckets[hash & (htab->n_buckets - 1)]; +} + +static inline struct hlist_head *select_bucket(struct bpf_htab *htab, u32 hash) +{ + return &__select_bucket(htab, hash)->head; +} + static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l) { atomic_dec(&htab->count); kfree_rcu(l, rcu); } +static struct smap_psock_map_entry *psock_map_pop(struct sock *sk, + struct smap_psock *psock) +{ + struct smap_psock_map_entry *e; + + spin_lock_bh(&psock->maps_lock); + e = list_first_entry_or_null(&psock->maps, + struct smap_psock_map_entry, + list); + if (e) + list_del(&e->list); + spin_unlock_bh(&psock->maps_lock); + return e; +} + static void bpf_tcp_close(struct sock *sk, long timeout) { void (*close_fun)(struct sock *sk, long timeout); - struct smap_psock_map_entry *e, *tmp; + struct smap_psock_map_entry *e; struct sk_msg_buff *md, *mtmp; struct smap_psock *psock; struct sock *osk; @@ -286,7 +326,6 @@ static void bpf_tcp_close(struct sock *sk, long timeout) */ close_fun = psock->save_close; - write_lock_bh(&sk->sk_callback_lock); if (psock->cork) { free_start_sg(psock->sock, psock->cork); kfree(psock->cork); @@ -299,20 +338,38 @@ static void bpf_tcp_close(struct sock *sk, long timeout) kfree(md); } - list_for_each_entry_safe(e, tmp, &psock->maps, list) { + e = psock_map_pop(sk, psock); + while (e) { if (e->entry) { osk = cmpxchg(e->entry, sk, NULL); if (osk == sk) { - list_del(&e->list); smap_release_sock(psock, sk); } } else { - hlist_del_rcu(&e->hash_link->hash_node); - smap_release_sock(psock, e->hash_link->sk); - free_htab_elem(e->htab, e->hash_link); + struct htab_elem *link = rcu_dereference(e->hash_link); + struct bpf_htab *htab = rcu_dereference(e->htab); + struct hlist_head *head; + struct htab_elem *l; + struct bucket *b; + + b = __select_bucket(htab, link->hash); + head = &b->head; + raw_spin_lock_bh(&b->lock); + l = lookup_elem_raw(head, + link->hash, link->key, + htab->map.key_size); + /* If another thread deleted this object skip deletion. + * The refcnt on psock may or may not be zero. + */ + if (l) { + hlist_del_rcu(&link->hash_node); + smap_release_sock(psock, link->sk); + free_htab_elem(htab, link); + } + raw_spin_unlock_bh(&b->lock); } + e = psock_map_pop(sk, psock); } - write_unlock_bh(&sk->sk_callback_lock); rcu_read_unlock(); close_fun(sk, timeout); } @@ -1395,7 +1452,9 @@ static void smap_release_sock(struct smap_psock *psock, struct sock *sock) { if (refcount_dec_and_test(&psock->refcnt)) { tcp_cleanup_ulp(sock); + write_lock_bh(&sock->sk_callback_lock); smap_stop_sock(psock, sock); + write_unlock_bh(&sock->sk_callback_lock); clear_bit(SMAP_TX_RUNNING, &psock->state); rcu_assign_sk_user_data(sock, NULL); call_rcu_sched(&psock->rcu, smap_destroy_psock); @@ -1546,6 +1605,7 @@ static struct smap_psock *smap_init_psock(struct sock *sock, int node) INIT_LIST_HEAD(&psock->maps); INIT_LIST_HEAD(&psock->ingress); refcount_set(&psock->refcnt, 1); + spin_lock_init(&psock->maps_lock); rcu_assign_sk_user_data(sock, psock); sock_hold(sock); @@ -1607,10 +1667,12 @@ static void smap_list_map_remove(struct smap_psock *psock, { struct smap_psock_map_entry *e, *tmp; + spin_lock_bh(&psock->maps_lock); list_for_each_entry_safe(e, tmp, &psock->maps, list) { if (e->entry == entry) list_del(&e->list); } + spin_unlock_bh(&psock->maps_lock); } static void smap_list_hash_remove(struct smap_psock *psock, @@ -1618,12 +1680,14 @@ static void smap_list_hash_remove(struct smap_psock *psock, { struct smap_psock_map_entry *e, *tmp; + spin_lock_bh(&psock->maps_lock); list_for_each_entry_safe(e, tmp, &psock->maps, list) { - struct htab_elem *c = e->hash_link; + struct htab_elem *c = rcu_dereference(e->hash_link); if (c == hash_link) list_del(&e->list); } + spin_unlock_bh(&psock->maps_lock); } static void sock_map_free(struct bpf_map *map) @@ -1649,7 +1713,6 @@ static void sock_map_free(struct bpf_map *map) if (!sock) continue; - write_lock_bh(&sock->sk_callback_lock); psock = smap_psock_sk(sock); /* This check handles a racing sock event that can get the * sk_callback_lock before this case but after xchg happens @@ -1660,7 +1723,6 @@ static void sock_map_free(struct bpf_map *map) smap_list_map_remove(psock, &stab->sock_map[i]); smap_release_sock(psock, sock); } - write_unlock_bh(&sock->sk_callback_lock); } rcu_read_unlock(); @@ -1709,7 +1771,6 @@ static int sock_map_delete_elem(struct bpf_map *map, void *key) if (!sock) return -EINVAL; - write_lock_bh(&sock->sk_callback_lock); psock = smap_psock_sk(sock); if (!psock) goto out; @@ -1719,7 +1780,6 @@ static int sock_map_delete_elem(struct bpf_map *map, void *key) smap_list_map_remove(psock, &stab->sock_map[k]); smap_release_sock(psock, sock); out: - write_unlock_bh(&sock->sk_callback_lock); return 0; } @@ -1800,7 +1860,6 @@ static int __sock_map_ctx_update_elem(struct bpf_map *map, } } - write_lock_bh(&sock->sk_callback_lock); psock = smap_psock_sk(sock); /* 2. Do not allow inheriting programs if psock exists and has @@ -1857,7 +1916,9 @@ static int __sock_map_ctx_update_elem(struct bpf_map *map, if (err) goto out_free; smap_init_progs(psock, verdict, parse); + write_lock_bh(&sock->sk_callback_lock); smap_start_sock(psock, sock); + write_unlock_bh(&sock->sk_callback_lock); } /* 4. Place psock in sockmap for use and stop any programs on @@ -1867,9 +1928,10 @@ static int __sock_map_ctx_update_elem(struct bpf_map *map, */ if (map_link) { e->entry = map_link; + spin_lock_bh(&psock->maps_lock); list_add_tail(&e->list, &psock->maps); + spin_unlock_bh(&psock->maps_lock); } - write_unlock_bh(&sock->sk_callback_lock); return err; out_free: smap_release_sock(psock, sock); @@ -1880,7 +1942,6 @@ out_progs: } if (tx_msg) bpf_prog_put(tx_msg); - write_unlock_bh(&sock->sk_callback_lock); kfree(e); return err; } @@ -1917,10 +1978,8 @@ static int sock_map_ctx_update_elem(struct bpf_sock_ops_kern *skops, if (osock) { struct smap_psock *opsock = smap_psock_sk(osock); - write_lock_bh(&osock->sk_callback_lock); smap_list_map_remove(opsock, &stab->sock_map[i]); smap_release_sock(opsock, osock); - write_unlock_bh(&osock->sk_callback_lock); } out: return err; @@ -2109,14 +2168,13 @@ free_htab: return ERR_PTR(err); } -static inline struct bucket *__select_bucket(struct bpf_htab *htab, u32 hash) +static void __bpf_htab_free(struct rcu_head *rcu) { - return &htab->buckets[hash & (htab->n_buckets - 1)]; -} + struct bpf_htab *htab; -static inline struct hlist_head *select_bucket(struct bpf_htab *htab, u32 hash) -{ - return &__select_bucket(htab, hash)->head; + htab = container_of(rcu, struct bpf_htab, rcu); + bpf_map_area_free(htab->buckets); + kfree(htab); } static void sock_hash_free(struct bpf_map *map) @@ -2135,16 +2193,18 @@ static void sock_hash_free(struct bpf_map *map) */ rcu_read_lock(); for (i = 0; i < htab->n_buckets; i++) { - struct hlist_head *head = select_bucket(htab, i); + struct bucket *b = __select_bucket(htab, i); + struct hlist_head *head; struct hlist_node *n; struct htab_elem *l; + raw_spin_lock_bh(&b->lock); + head = &b->head; hlist_for_each_entry_safe(l, n, head, hash_node) { struct sock *sock = l->sk; struct smap_psock *psock; hlist_del_rcu(&l->hash_node); - write_lock_bh(&sock->sk_callback_lock); psock = smap_psock_sk(sock); /* This check handles a racing sock event that can get * the sk_callback_lock before this case but after xchg @@ -2155,13 +2215,12 @@ static void sock_hash_free(struct bpf_map *map) smap_list_hash_remove(psock, l); smap_release_sock(psock, sock); } - write_unlock_bh(&sock->sk_callback_lock); - kfree(l); + free_htab_elem(htab, l); } + raw_spin_unlock_bh(&b->lock); } rcu_read_unlock(); - bpf_map_area_free(htab->buckets); - kfree(htab); + call_rcu(&htab->rcu, __bpf_htab_free); } static struct htab_elem *alloc_sock_hash_elem(struct bpf_htab *htab, @@ -2188,19 +2247,6 @@ static struct htab_elem *alloc_sock_hash_elem(struct bpf_htab *htab, return l_new; } -static struct htab_elem *lookup_elem_raw(struct hlist_head *head, - u32 hash, void *key, u32 key_size) -{ - struct htab_elem *l; - - hlist_for_each_entry_rcu(l, head, hash_node) { - if (l->hash == hash && !memcmp(&l->key, key, key_size)) - return l; - } - - return NULL; -} - static inline u32 htab_map_hash(const void *key, u32 key_len) { return jhash(key, key_len, 0); @@ -2320,9 +2366,12 @@ static int sock_hash_ctx_update_elem(struct bpf_sock_ops_kern *skops, goto bucket_err; } - e->hash_link = l_new; - e->htab = container_of(map, struct bpf_htab, map); + rcu_assign_pointer(e->hash_link, l_new); + rcu_assign_pointer(e->htab, + container_of(map, struct bpf_htab, map)); + spin_lock_bh(&psock->maps_lock); list_add_tail(&e->list, &psock->maps); + spin_unlock_bh(&psock->maps_lock); /* add new element to the head of the list, so that * concurrent search will find it before old elem @@ -2392,7 +2441,6 @@ static int sock_hash_delete_elem(struct bpf_map *map, void *key) struct smap_psock *psock; hlist_del_rcu(&l->hash_node); - write_lock_bh(&sock->sk_callback_lock); psock = smap_psock_sk(sock); /* This check handles a racing sock event that can get the * sk_callback_lock before this case but after xchg happens @@ -2403,7 +2451,6 @@ static int sock_hash_delete_elem(struct bpf_map *map, void *key) smap_list_hash_remove(psock, l); smap_release_sock(psock, sock); } - write_unlock_bh(&sock->sk_callback_lock); free_htab_elem(htab, l); ret = 0; } -- cgit v1.2.3 From caac76a5170eb508529bbff9d9300e9c57126444 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sat, 30 Jun 2018 06:17:52 -0700 Subject: bpf: sockhash, add release routine Add map_release_uref pointer to hashmap ops. This was dropped when original sockhash code was ported into bpf-next before initial commit. Fixes: 81110384441a ("bpf: sockmap, add hash map support") Acked-by: Martin KaFai Lau Signed-off-by: John Fastabend Signed-off-by: Daniel Borkmann --- kernel/bpf/sockmap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index ac09b35a9567..cf7b6a6dbd1f 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -2496,6 +2496,7 @@ const struct bpf_map_ops sock_hash_ops = { .map_get_next_key = sock_hash_get_next_key, .map_update_elem = sock_hash_update_elem, .map_delete_elem = sock_hash_delete_elem, + .map_release_uref = sock_map_release, }; BPF_CALL_4(bpf_sock_map_update, struct bpf_sock_ops_kern *, bpf_sock, -- cgit v1.2.3 From 06d793b114e9d922c03aa077ac6c5c51fdda2722 Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Thu, 21 Jun 2018 19:10:00 +0100 Subject: ARM: dts: imx51-zii-rdu1: fix touchscreen pinctrl The pinctrl settings were incorrect for the touchscreen interrupt line, causing an interrupt storm. This change has been tested with both the atmel_mxt_ts and RMI4 drivers on the RDU1 units. The value 0x4 comes from the value of register IOMUXC_SW_PAD_CTL_PAD_CSI1_D8 from the old vendor kernel. Signed-off-by: Nick Dyer Fixes: ceef0396f367 ("ARM: dts: imx: add ZII RDU1 board") Cc: # 4.15+ Reviewed-by: Fabio Estevam Tested-by: Chris Healy Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51-zii-rdu1.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index df9eca94d812..8a878687197b 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -770,7 +770,7 @@ pinctrl_ts: tsgrp { fsl,pins = < - MX51_PAD_CSI1_D8__GPIO3_12 0x85 + MX51_PAD_CSI1_D8__GPIO3_12 0x04 MX51_PAD_CSI1_D9__GPIO3_13 0x85 >; }; -- cgit v1.2.3 From ae15a41a641449f536578b0d9ec0e4ade130deb5 Mon Sep 17 00:00:00 2001 From: Stafford Horne Date: Sun, 1 Jul 2018 14:17:36 +0900 Subject: openrisc: entry: Fix delay slot exception detection Originally in patch e6d20c55a4 ("openrisc: entry: Fix delay slot detection") I fixed delay slot detection, but only for QEMU. We missed that hardware delay slot detection using delay slot exception flag (DSX) was still broken. This was because QEMU set the DSX flag in both pre-exception supervision register (ESR) and supervision register (SR) register, but on real hardware the DSX flag is only set on the SR register during exceptions. Fix this by carrying the DSX flag into the SR register during exception. We also update the DSX flag read locations to read the value from the SR register not the pt_regs SR register which represents ESR. The ESR should never have the DSX flag set. In the process I updated/removed a few comments to match the current state. Including removing a comment saying that the DSX detection logic was inefficient and needed to be rewritten. I have tested this on QEMU with a patch ensuring it matches the hardware specification. Link: https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg00000.html Fixes: e6d20c55a4 ("openrisc: entry: Fix delay slot detection") Signed-off-by: Stafford Horne --- arch/openrisc/kernel/entry.S | 8 +------- arch/openrisc/kernel/head.S | 9 ++++++--- arch/openrisc/kernel/traps.c | 2 +- 3 files changed, 8 insertions(+), 11 deletions(-) diff --git a/arch/openrisc/kernel/entry.S b/arch/openrisc/kernel/entry.S index 690d55272ba6..0c826ad6e994 100644 --- a/arch/openrisc/kernel/entry.S +++ b/arch/openrisc/kernel/entry.S @@ -277,12 +277,6 @@ EXCEPTION_ENTRY(_data_page_fault_handler) l.addi r3,r1,0 // pt_regs /* r4 set be EXCEPTION_HANDLE */ // effective address of fault - /* - * __PHX__: TODO - * - * all this can be written much simpler. look at - * DTLB miss handler in the CONFIG_GUARD_PROTECTED_CORE part - */ #ifdef CONFIG_OPENRISC_NO_SPR_SR_DSX l.lwz r6,PT_PC(r3) // address of an offending insn l.lwz r6,0(r6) // instruction that caused pf @@ -314,7 +308,7 @@ EXCEPTION_ENTRY(_data_page_fault_handler) #else - l.lwz r6,PT_SR(r3) // SR + l.mfspr r6,r0,SPR_SR // SR l.andi r6,r6,SPR_SR_DSX // check for delay slot exception l.sfne r6,r0 // exception happened in delay slot l.bnf 7f diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S index fb02b2a1d6f2..9fc6b60140f0 100644 --- a/arch/openrisc/kernel/head.S +++ b/arch/openrisc/kernel/head.S @@ -210,8 +210,7 @@ * r4 - EEAR exception EA * r10 - current pointing to current_thread_info struct * r12 - syscall 0, since we didn't come from syscall - * r13 - temp it actually contains new SR, not needed anymore - * r31 - handler address of the handler we'll jump to + * r30 - handler address of the handler we'll jump to * * handler has to save remaining registers to the exception * ksp frame *before* tainting them! @@ -244,6 +243,7 @@ /* r1 is KSP, r30 is __pa(KSP) */ ;\ tophys (r30,r1) ;\ l.sw PT_GPR12(r30),r12 ;\ + /* r4 use for tmp before EA */ ;\ l.mfspr r12,r0,SPR_EPCR_BASE ;\ l.sw PT_PC(r30),r12 ;\ l.mfspr r12,r0,SPR_ESR_BASE ;\ @@ -263,7 +263,10 @@ /* r12 == 1 if we come from syscall */ ;\ CLEAR_GPR(r12) ;\ /* ----- turn on MMU ----- */ ;\ - l.ori r30,r0,(EXCEPTION_SR) ;\ + /* Carry DSX into exception SR */ ;\ + l.mfspr r30,r0,SPR_SR ;\ + l.andi r30,r30,SPR_SR_DSX ;\ + l.ori r30,r30,(EXCEPTION_SR) ;\ l.mtspr r0,r30,SPR_ESR_BASE ;\ /* r30: EA address of handler */ ;\ LOAD_SYMBOL_2_GPR(r30,handler) ;\ diff --git a/arch/openrisc/kernel/traps.c b/arch/openrisc/kernel/traps.c index fac246e6f37a..d8981cbb852a 100644 --- a/arch/openrisc/kernel/traps.c +++ b/arch/openrisc/kernel/traps.c @@ -300,7 +300,7 @@ static inline int in_delay_slot(struct pt_regs *regs) return 0; } #else - return regs->sr & SPR_SR_DSX; + return mfspr(SPR_SR) & SPR_SR_DSX; #endif } -- cgit v1.2.3 From 1236f22fbae15df3736ab4a984c64c0c6ee6254c Mon Sep 17 00:00:00 2001 From: Ilpo Järvinen Date: Fri, 29 Jun 2018 13:07:53 +0300 Subject: tcp: prevent bogus FRTO undos with non-SACK flows MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If SACK is not enabled and the first cumulative ACK after the RTO retransmission covers more than the retransmitted skb, a spurious FRTO undo will trigger (assuming FRTO is enabled for that RTO). The reason is that any non-retransmitted segment acknowledged will set FLAG_ORIG_SACK_ACKED in tcp_clean_rtx_queue even if there is no indication that it would have been delivered for real (the scoreboard is not kept with TCPCB_SACKED_ACKED bits in the non-SACK case so the check for that bit won't help like it does with SACK). Having FLAG_ORIG_SACK_ACKED set results in the spurious FRTO undo in tcp_process_loss. We need to use more strict condition for non-SACK case and check that none of the cumulatively ACKed segments were retransmitted to prove that progress is due to original transmissions. Only then keep FLAG_ORIG_SACK_ACKED set, allowing FRTO undo to proceed in non-SACK case. (FLAG_ORIG_SACK_ACKED is planned to be renamed to FLAG_ORIG_PROGRESS to better indicate its purpose but to keep this change minimal, it will be done in another patch). Besides burstiness and congestion control violations, this problem can result in RTO loop: When the loss recovery is prematurely undoed, only new data will be transmitted (if available) and the next retransmission can occur only after a new RTO which in case of multiple losses (that are not for consecutive packets) requires one RTO per loss to recover. Signed-off-by: Ilpo Järvinen Tested-by: Neal Cardwell Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 045d930d01a9..8e5522c6833a 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -3181,6 +3181,15 @@ static int tcp_clean_rtx_queue(struct sock *sk, u32 prior_fack, if (tcp_is_reno(tp)) { tcp_remove_reno_sacks(sk, pkts_acked); + + /* If any of the cumulatively ACKed segments was + * retransmitted, non-SACK case cannot confirm that + * progress was due to original transmission due to + * lack of TCPCB_SACKED_ACKED bits even if some of + * the packets may have been never retransmitted. + */ + if (flag & FLAG_RETRANS_DATA_ACKED) + flag &= ~FLAG_ORIG_SACK_ACKED; } else { int delta; -- cgit v1.2.3 From a068b94d74ddb7776ca707b6d39d1ac0d2d057e6 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Mon, 18 Jun 2018 15:33:23 -0700 Subject: crypto: arm/speck - fix building in Thumb2 mode Building the kernel with CONFIG_THUMB2_KERNEL=y and CONFIG_CRYPTO_SPECK_NEON set fails with the following errors: arch/arm/crypto/speck-neon-core.S: Assembler messages: arch/arm/crypto/speck-neon-core.S:419: Error: r13 not allowed here -- `bic sp,#0xf' arch/arm/crypto/speck-neon-core.S:423: Error: r13 not allowed here -- `bic sp,#0xf' arch/arm/crypto/speck-neon-core.S:427: Error: r13 not allowed here -- `bic sp,#0xf' arch/arm/crypto/speck-neon-core.S:431: Error: r13 not allowed here -- `bic sp,#0xf' The problem is that the 'bic' instruction can't operate on the 'sp' register in Thumb2 mode. Fix it by using a temporary register. This isn't in the main loop, so the performance difference is negligible. This also matches what aes-neonbs-core.S does. Reported-by: Stefan Agner Fixes: ede9622162fa ("crypto: arm/speck - add NEON-accelerated implementation of Speck-XTS") Signed-off-by: Eric Biggers Acked-by: Ard Biesheuvel Reviewed-by: Stefan Agner Signed-off-by: Herbert Xu --- arch/arm/crypto/speck-neon-core.S | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/crypto/speck-neon-core.S b/arch/arm/crypto/speck-neon-core.S index 3c1e203e53b9..57caa742016e 100644 --- a/arch/arm/crypto/speck-neon-core.S +++ b/arch/arm/crypto/speck-neon-core.S @@ -272,9 +272,11 @@ * Allocate stack space to store 128 bytes worth of tweaks. For * performance, this space is aligned to a 16-byte boundary so that we * can use the load/store instructions that declare 16-byte alignment. + * For Thumb2 compatibility, don't do the 'bic' directly on 'sp'. */ - sub sp, #128 - bic sp, #0xf + sub r12, sp, #128 + bic r12, #0xf + mov sp, r12 .if \n == 64 // Load first tweak -- cgit v1.2.3 From 221e00d1fce976d8a04ff591a0150caf84e176f8 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 23 Jun 2018 12:36:22 +0200 Subject: crypto: x86 - Add missing RETs Add explicit RETs to the tail calls of AEGIS and MORUS crypto algorithms otherwise they run into INT3 padding due to ("x86/asm: Pad assembly functions with INT3 instructions") leading to spurious debug exceptions. Mike Galbraith took care of all the remaining callsites. Signed-off-by: Borislav Petkov Acked-by: Ondrej Mosnacek Signed-off-by: Herbert Xu --- arch/x86/crypto/aegis128-aesni-asm.S | 1 + arch/x86/crypto/aegis128l-aesni-asm.S | 1 + arch/x86/crypto/aegis256-aesni-asm.S | 1 + arch/x86/crypto/morus1280-avx2-asm.S | 1 + arch/x86/crypto/morus1280-sse2-asm.S | 1 + arch/x86/crypto/morus640-sse2-asm.S | 1 + 6 files changed, 6 insertions(+) diff --git a/arch/x86/crypto/aegis128-aesni-asm.S b/arch/x86/crypto/aegis128-aesni-asm.S index 9254e0b6cc06..717bf0776421 100644 --- a/arch/x86/crypto/aegis128-aesni-asm.S +++ b/arch/x86/crypto/aegis128-aesni-asm.S @@ -535,6 +535,7 @@ ENTRY(crypto_aegis128_aesni_enc_tail) movdqu STATE3, 0x40(STATEP) FRAME_END + ret ENDPROC(crypto_aegis128_aesni_enc_tail) .macro decrypt_block a s0 s1 s2 s3 s4 i diff --git a/arch/x86/crypto/aegis128l-aesni-asm.S b/arch/x86/crypto/aegis128l-aesni-asm.S index 9263c344f2c7..4eda2b8db9e1 100644 --- a/arch/x86/crypto/aegis128l-aesni-asm.S +++ b/arch/x86/crypto/aegis128l-aesni-asm.S @@ -645,6 +645,7 @@ ENTRY(crypto_aegis128l_aesni_enc_tail) state_store0 FRAME_END + ret ENDPROC(crypto_aegis128l_aesni_enc_tail) /* diff --git a/arch/x86/crypto/aegis256-aesni-asm.S b/arch/x86/crypto/aegis256-aesni-asm.S index 1d977d515bf9..32aae8397268 100644 --- a/arch/x86/crypto/aegis256-aesni-asm.S +++ b/arch/x86/crypto/aegis256-aesni-asm.S @@ -543,6 +543,7 @@ ENTRY(crypto_aegis256_aesni_enc_tail) state_store0 FRAME_END + ret ENDPROC(crypto_aegis256_aesni_enc_tail) /* diff --git a/arch/x86/crypto/morus1280-avx2-asm.S b/arch/x86/crypto/morus1280-avx2-asm.S index 37d422e77931..07653d4582a6 100644 --- a/arch/x86/crypto/morus1280-avx2-asm.S +++ b/arch/x86/crypto/morus1280-avx2-asm.S @@ -453,6 +453,7 @@ ENTRY(crypto_morus1280_avx2_enc_tail) vmovdqu STATE4, (4 * 32)(%rdi) FRAME_END + ret ENDPROC(crypto_morus1280_avx2_enc_tail) /* diff --git a/arch/x86/crypto/morus1280-sse2-asm.S b/arch/x86/crypto/morus1280-sse2-asm.S index 1fe637c7be9d..bd1aa1b60869 100644 --- a/arch/x86/crypto/morus1280-sse2-asm.S +++ b/arch/x86/crypto/morus1280-sse2-asm.S @@ -652,6 +652,7 @@ ENTRY(crypto_morus1280_sse2_enc_tail) movdqu STATE4_HI, (9 * 16)(%rdi) FRAME_END + ret ENDPROC(crypto_morus1280_sse2_enc_tail) /* diff --git a/arch/x86/crypto/morus640-sse2-asm.S b/arch/x86/crypto/morus640-sse2-asm.S index 71c72a0a0862..efa02816d921 100644 --- a/arch/x86/crypto/morus640-sse2-asm.S +++ b/arch/x86/crypto/morus640-sse2-asm.S @@ -437,6 +437,7 @@ ENTRY(crypto_morus640_sse2_enc_tail) movdqu STATE4, (4 * 16)(%rdi) FRAME_END + ret ENDPROC(crypto_morus640_sse2_enc_tail) /* -- cgit v1.2.3 From 021c91791a5e7e85c567452f1be3e4c2c6cb6063 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 1 Jul 2018 16:04:53 -0700 Subject: Linux 4.18-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index c9132594860b..c5ce55cbc543 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 4 PATCHLEVEL = 18 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Merciless Moray # *DOCUMENTATION* -- cgit v1.2.3 From ecd60532e060e45c63c57ecf1c8549b1d656d34d Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 18 Jun 2018 15:34:14 +1000 Subject: m68k: fix "bad page state" oops on ColdFire boot MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Booting a ColdFire m68k core with MMU enabled causes a "bad page state" oops since commit 1d40a5ea01d5 ("mm: mark pages in use for page tables"): BUG: Bad page state in process sh pfn:01ce2 page:004fefc8 count:0 mapcount:-1024 mapping:00000000 index:0x0 flags: 0x0() raw: 00000000 00000000 00000000 fffffbff 00000000 00000100 00000200 00000000 raw: 039c4000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 22 Comm: sh Not tainted 4.17.0-07461-g1d40a5ea01d5 #13 Fix by calling pgtable_page_dtor() in our __pte_free_tlb() code path, so that the PG_table flag is cleared before we free the pte page. Note that I had to change the type of pte_free() to be static from extern. Otherwise you get a lot of warnings like this: ./arch/m68k/include/asm/mcf_pgalloc.h:80:2: warning: ‘pgtable_page_dtor’ is static but used in inline function ‘pte_free’ which is not static pgtable_page_dtor(page); ^ And making it static is consistent with our use of this in the other m68k pgalloc definitions of pte_free(). Signed-off-by: Greg Ungerer CC: Matthew Wilcox Reviewed-by: Geert Uytterhoeven --- arch/m68k/include/asm/mcf_pgalloc.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/m68k/include/asm/mcf_pgalloc.h b/arch/m68k/include/asm/mcf_pgalloc.h index 8b707c249026..12fe700632f4 100644 --- a/arch/m68k/include/asm/mcf_pgalloc.h +++ b/arch/m68k/include/asm/mcf_pgalloc.h @@ -44,6 +44,7 @@ extern inline pmd_t *pmd_alloc_kernel(pgd_t *pgd, unsigned long address) static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page, unsigned long address) { + pgtable_page_dtor(page); __free_page(page); } @@ -74,8 +75,9 @@ static inline struct page *pte_alloc_one(struct mm_struct *mm, return page; } -extern inline void pte_free(struct mm_struct *mm, struct page *page) +static inline void pte_free(struct mm_struct *mm, struct page *page) { + pgtable_page_dtor(page); __free_page(page); } -- cgit v1.2.3 From fa7743b141678116c19b89c5492b330671a51e02 Mon Sep 17 00:00:00 2001 From: Thomas Zimmermann Date: Mon, 18 Jun 2018 15:17:37 +0200 Subject: drm/exynos: Replace drm_framebuffer_{un/reference} with put,get functions This patch unifies the naming of DRM functions for reference counting of struct drm_framebuffer. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_plane.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c index 38a2a7f1204b..7098c6d35266 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c @@ -132,7 +132,7 @@ static void exynos_drm_plane_reset(struct drm_plane *plane) if (plane->state) { exynos_state = to_exynos_plane_state(plane->state); if (exynos_state->base.fb) - drm_framebuffer_unreference(exynos_state->base.fb); + drm_framebuffer_put(exynos_state->base.fb); kfree(exynos_state); plane->state = NULL; } -- cgit v1.2.3 From af7d9101a08d752bb6da9a80df6edbc618fab4cc Mon Sep 17 00:00:00 2001 From: Thomas Zimmermann Date: Mon, 18 Jun 2018 15:17:38 +0200 Subject: drm/exynos: Replace drm_gem_object_unreference_unlocked with put function This patch unifies the naming of DRM functions for reference counting of struct drm_gem_object. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fb.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_gem.c | 10 +++++----- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fb.c b/drivers/gpu/drm/exynos/exynos_drm_fb.c index 7fcc1a7ab1a0..27b7d34d776c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fb.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fb.c @@ -138,7 +138,7 @@ exynos_user_fb_create(struct drm_device *dev, struct drm_file *file_priv, err: while (i--) - drm_gem_object_unreference_unlocked(&exynos_gem[i]->base); + drm_gem_object_put_unlocked(&exynos_gem[i]->base); return ERR_PTR(ret); } diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index 6e1494fa71b4..bdf5a7655228 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -143,7 +143,7 @@ static int exynos_drm_gem_handle_create(struct drm_gem_object *obj, DRM_DEBUG_KMS("gem handle = 0x%x\n", *handle); /* drop reference from allocate - handle holds it now. */ - drm_gem_object_unreference_unlocked(obj); + drm_gem_object_put_unlocked(obj); return 0; } @@ -186,7 +186,7 @@ unsigned long exynos_drm_gem_get_size(struct drm_device *dev, exynos_gem = to_exynos_gem(obj); - drm_gem_object_unreference_unlocked(obj); + drm_gem_object_put_unlocked(obj); return exynos_gem->size; } @@ -329,13 +329,13 @@ void exynos_drm_gem_put_dma_addr(struct drm_device *dev, return; } - drm_gem_object_unreference_unlocked(obj); + drm_gem_object_put_unlocked(obj); /* * decrease obj->refcount one more time because we has already * increased it at exynos_drm_gem_get_dma_addr(). */ - drm_gem_object_unreference_unlocked(obj); + drm_gem_object_put_unlocked(obj); } static int exynos_drm_gem_mmap_buffer(struct exynos_drm_gem *exynos_gem, @@ -383,7 +383,7 @@ int exynos_drm_gem_get_ioctl(struct drm_device *dev, void *data, args->flags = exynos_gem->flags; args->size = exynos_gem->size; - drm_gem_object_unreference_unlocked(obj); + drm_gem_object_put_unlocked(obj); return 0; } -- cgit v1.2.3 From aab109b340eaf3968337e1d19d71ff0551c57365 Mon Sep 17 00:00:00 2001 From: Thomas Zimmermann Date: Mon, 18 Jun 2018 15:17:39 +0200 Subject: drm/exynos: Replace drm_dev_unref with drm_dev_put This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index a81b4a5e24a7..ed3cc2989f93 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -420,7 +420,7 @@ err_mode_config_cleanup: err_free_private: kfree(private); err_free_drm: - drm_dev_unref(drm); + drm_dev_put(drm); return ret; } @@ -444,7 +444,7 @@ static void exynos_drm_unbind(struct device *dev) drm->dev_private = NULL; dev_set_drvdata(dev, NULL); - drm_dev_unref(drm); + drm_dev_put(drm); } static const struct component_master_ops exynos_drm_ops = { -- cgit v1.2.3 From 510fe10b6180137773dce9032b51bb82ff946c2d Mon Sep 17 00:00:00 2001 From: Zhao Yan Date: Tue, 19 Jun 2018 15:44:11 +0800 Subject: drm/i915/gvt: fix a bug of partially write ggtt enties when guest writes ggtt entries, it could write 8 bytes a time if gtt_entry_size is 8. But, qemu could split the 8 bytes into 2 consecutive 4-byte writes. If each 4-byte partial write could trigger a host ggtt write, it is very possible that a wrong combination is written to the host ggtt. E.g. the higher 4 bytes is the old value, but the lower 4 bytes is the new value, and this 8-byte combination is wrong but written to the ggtt, thus causing bugs. To handle this condition, we just record the first 4-byte write, then wait until the second 4-byte write comes and write the combined 64-bit data to host ggtt table. To save memory space and to spot partial write as early as possible, we don't keep this information for every ggtt index. Instread, we just record the last ggtt write position, and assume the two 4-byte writes come in consecutively for each vgpu. This assumption is right based on the characteristic of ggtt entry which stores memory address. When gtt_entry_size is 8, the guest memory physical address should be 64 bits, so any sane guest driver should write 8-byte long data at a time, so 2 consecutive 4-byte writes at the same ggtt index should be trapped in gvt. v2: when incomplete ggtt entry write is located, e.g. 1. guest only writes 4 bytes at a ggtt offset and no long writes the rest 4 bytes. 2. guest writes 4 bytes of a ggtt offset, then write at other ggtt offsets, then return back to write the left 4 bytes of the first ggtt offset. add error handling logic to remap host entry to scratch page, and mark guest virtual ggtt entry as not present. (zhenyu wang) Signed-off-by: Zhao Yan Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/gtt.c | 58 ++++++++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/gvt/gtt.h | 2 ++ 2 files changed, 60 insertions(+) diff --git a/drivers/gpu/drm/i915/gvt/gtt.c b/drivers/gpu/drm/i915/gvt/gtt.c index 23296547da95..4efec8fa6c1d 100644 --- a/drivers/gpu/drm/i915/gvt/gtt.c +++ b/drivers/gpu/drm/i915/gvt/gtt.c @@ -1592,6 +1592,7 @@ static struct intel_vgpu_mm *intel_vgpu_create_ggtt_mm(struct intel_vgpu *vgpu) vgpu_free_mm(mm); return ERR_PTR(-ENOMEM); } + mm->ggtt_mm.last_partial_off = -1UL; return mm; } @@ -1616,6 +1617,7 @@ void _intel_vgpu_mm_release(struct kref *mm_ref) invalidate_ppgtt_mm(mm); } else { vfree(mm->ggtt_mm.virtual_ggtt); + mm->ggtt_mm.last_partial_off = -1UL; } vgpu_free_mm(mm); @@ -1868,6 +1870,62 @@ static int emulate_ggtt_mmio_write(struct intel_vgpu *vgpu, unsigned int off, memcpy((void *)&e.val64 + (off & (info->gtt_entry_size - 1)), p_data, bytes); + /* If ggtt entry size is 8 bytes, and it's split into two 4 bytes + * write, we assume the two 4 bytes writes are consecutive. + * Otherwise, we abort and report error + */ + if (bytes < info->gtt_entry_size) { + if (ggtt_mm->ggtt_mm.last_partial_off == -1UL) { + /* the first partial part*/ + ggtt_mm->ggtt_mm.last_partial_off = off; + ggtt_mm->ggtt_mm.last_partial_data = e.val64; + return 0; + } else if ((g_gtt_index == + (ggtt_mm->ggtt_mm.last_partial_off >> + info->gtt_entry_size_shift)) && + (off != ggtt_mm->ggtt_mm.last_partial_off)) { + /* the second partial part */ + + int last_off = ggtt_mm->ggtt_mm.last_partial_off & + (info->gtt_entry_size - 1); + + memcpy((void *)&e.val64 + last_off, + (void *)&ggtt_mm->ggtt_mm.last_partial_data + + last_off, bytes); + + ggtt_mm->ggtt_mm.last_partial_off = -1UL; + } else { + int last_offset; + + gvt_vgpu_err("failed to populate guest ggtt entry: abnormal ggtt entry write sequence, last_partial_off=%lx, offset=%x, bytes=%d, ggtt entry size=%d\n", + ggtt_mm->ggtt_mm.last_partial_off, off, + bytes, info->gtt_entry_size); + + /* set host ggtt entry to scratch page and clear + * virtual ggtt entry as not present for last + * partially write offset + */ + last_offset = ggtt_mm->ggtt_mm.last_partial_off & + (~(info->gtt_entry_size - 1)); + + ggtt_get_host_entry(ggtt_mm, &m, last_offset); + ggtt_invalidate_pte(vgpu, &m); + ops->set_pfn(&m, gvt->gtt.scratch_mfn); + ops->clear_present(&m); + ggtt_set_host_entry(ggtt_mm, &m, last_offset); + ggtt_invalidate(gvt->dev_priv); + + ggtt_get_guest_entry(ggtt_mm, &e, last_offset); + ops->clear_present(&e); + ggtt_set_guest_entry(ggtt_mm, &e, last_offset); + + ggtt_mm->ggtt_mm.last_partial_off = off; + ggtt_mm->ggtt_mm.last_partial_data = e.val64; + + return 0; + } + } + if (ops->test_present(&e)) { gfn = ops->get_pfn(&e); m = e; diff --git a/drivers/gpu/drm/i915/gvt/gtt.h b/drivers/gpu/drm/i915/gvt/gtt.h index 3792f2b7f4ff..97e62647418a 100644 --- a/drivers/gpu/drm/i915/gvt/gtt.h +++ b/drivers/gpu/drm/i915/gvt/gtt.h @@ -150,6 +150,8 @@ struct intel_vgpu_mm { } ppgtt_mm; struct { void *virtual_ggtt; + unsigned long last_partial_off; + u64 last_partial_data; } ggtt_mm; }; }; -- cgit v1.2.3 From a4cae23cc05ccec749c2fc70fa9d8cda7c582319 Mon Sep 17 00:00:00 2001 From: Xiaolin Zhang Date: Thu, 21 Jun 2018 14:33:43 +0800 Subject: drm/i915/gvt: changed DDI mode emulation type changed gvt display transcode DDI mode from DP_SST to DVI to address below calltrace issue during guest booting up which is caused by zero dotclock initial value with DP_SST mode. transcode DVI mode emulation also align with native with DP connection. [drm:drm_calc_timestamping_constants] ERROR crtc 41: Can't calculate constants, dotclock = 0! WARNING: at drivers/gpu/drm/drm_vblank.c:620 drm_calc_vbltimestamp_from_scanoutpos Call Trace: ? drm_calc_timestamping_constants+0x144/0x150 [drm] drm_get_last_vbltimestamp+0x54/0x90 [drm] drm_reset_vblank_timestamp+0x59/0xd0 [drm] drm_crtc_vblank_on+0x7b/0xd0 [drm] intel_modeset_setup_hw_state+0xb67/0xfd0 [i915] ? gen2_read32+0x110/0x110 [i915] ? drm_modeset_lock+0x30/0xa0 [drm] intel_modeset_init+0x794/0x19d0 [i915] ? intel_setup_gmbus+0x232/0x2e0 [i915] i915_driver_load+0xb4a/0xf40 [i915] Signed-off-by: Xiaolin Zhang Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/display.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/display.c b/drivers/gpu/drm/i915/gvt/display.c index 6d8180e8d1e2..4b072ade8c38 100644 --- a/drivers/gpu/drm/i915/gvt/display.c +++ b/drivers/gpu/drm/i915/gvt/display.c @@ -196,7 +196,7 @@ static void emulate_monitor_status_change(struct intel_vgpu *vgpu) ~(TRANS_DDI_BPC_MASK | TRANS_DDI_MODE_SELECT_MASK | TRANS_DDI_PORT_MASK); vgpu_vreg_t(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) |= - (TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DP_SST | + (TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DVI | (PORT_B << TRANS_DDI_PORT_SHIFT) | TRANS_DDI_FUNC_ENABLE); if (IS_BROADWELL(dev_priv)) { @@ -216,7 +216,7 @@ static void emulate_monitor_status_change(struct intel_vgpu *vgpu) ~(TRANS_DDI_BPC_MASK | TRANS_DDI_MODE_SELECT_MASK | TRANS_DDI_PORT_MASK); vgpu_vreg_t(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) |= - (TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DP_SST | + (TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DVI | (PORT_C << TRANS_DDI_PORT_SHIFT) | TRANS_DDI_FUNC_ENABLE); if (IS_BROADWELL(dev_priv)) { @@ -236,7 +236,7 @@ static void emulate_monitor_status_change(struct intel_vgpu *vgpu) ~(TRANS_DDI_BPC_MASK | TRANS_DDI_MODE_SELECT_MASK | TRANS_DDI_PORT_MASK); vgpu_vreg_t(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) |= - (TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DP_SST | + (TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DVI | (PORT_D << TRANS_DDI_PORT_SHIFT) | TRANS_DDI_FUNC_ENABLE); if (IS_BROADWELL(dev_priv)) { -- cgit v1.2.3 From 08b393d01c88aff27347ed2b1b354eb4db2f1532 Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Wed, 27 Jun 2018 17:03:45 -0500 Subject: objtool: Support GCC 8 '-fnoreorder-functions' Since the following commit: cd77849a69cf ("objtool: Fix GCC 8 cold subfunction detection for aliased functions") ... if the kernel is built with EXTRA_CFLAGS='-fno-reorder-functions', objtool can get stuck in an infinite loop. That flag causes the new GCC 8 cold subfunctions to be placed in .text instead of .text.unlikely. But it also has an unfortunate quirk: in the symbol table, the subfunction (e.g., nmi_panic.cold.7) is nested inside the parent (nmi_panic). That function overlap confuses objtool, and causes it to get into an infinite loop in next_insn_same_func(). Here's Allan's description of the loop: "Objtool iterates through the instructions in nmi_panic using next_insn_same_func. Once it reaches the end of nmi_panic at 0x534 it jumps to 0x528 as that's the start of nmi_panic.cold.7. However, since the instructions starting at 0x528 are still associated with nmi_panic objtool will get stuck in a loop, continually jumping back to 0x528 after reaching 0x534." Fix it by shortening the length of the parent function so that the functions no longer overlap. Reported-and-analyzed-by: Allan Xavier Signed-off-by: Josh Poimboeuf Cc: Allan Xavier Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/9e704c52bee651129b036be14feda317ae5606ae.1530136978.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar --- tools/objtool/elf.c | 41 ++++++++++++++++++++++++++++------------- 1 file changed, 28 insertions(+), 13 deletions(-) diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c index 4e60e105583e..0d1acb704f64 100644 --- a/tools/objtool/elf.c +++ b/tools/objtool/elf.c @@ -302,19 +302,34 @@ static int read_symbols(struct elf *elf) continue; sym->pfunc = sym->cfunc = sym; coldstr = strstr(sym->name, ".cold."); - if (coldstr) { - coldstr[0] = '\0'; - pfunc = find_symbol_by_name(elf, sym->name); - coldstr[0] = '.'; - - if (!pfunc) { - WARN("%s(): can't find parent function", - sym->name); - goto err; - } - - sym->pfunc = pfunc; - pfunc->cfunc = sym; + if (!coldstr) + continue; + + coldstr[0] = '\0'; + pfunc = find_symbol_by_name(elf, sym->name); + coldstr[0] = '.'; + + if (!pfunc) { + WARN("%s(): can't find parent function", + sym->name); + goto err; + } + + sym->pfunc = pfunc; + pfunc->cfunc = sym; + + /* + * Unfortunately, -fnoreorder-functions puts the child + * inside the parent. Remove the overlap so we can + * have sane assumptions. + * + * Note that pfunc->len now no longer matches + * pfunc->sym.st_size. + */ + if (sym->sec == pfunc->sec && + sym->offset >= pfunc->offset && + sym->offset + sym->len == pfunc->offset + pfunc->len) { + pfunc->len -= sym->len; } } } -- cgit v1.2.3 From 920c92448839bd4f8eb87a92b08cad56d449caff Mon Sep 17 00:00:00 2001 From: Murray McAllister Date: Mon, 2 Jul 2018 13:07:28 +1200 Subject: staging: rtl8723bs: Prevent an underflow in rtw_check_beacon_data(). Dan Carpenter reported an integer underflow issue in the rtl8188eu driver. This is also needed for the length (signed integer) in rtl8723bs, as it is later converted to an unsigned integer and used in a memcpy operation. Original issue is at https://patchwork.kernel.org/patch/9796371/ Reported-by: Dan Carpenter Signed-off-by: Murray McAllister Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8723bs/core/rtw_ap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/rtl8723bs/core/rtw_ap.c b/drivers/staging/rtl8723bs/core/rtw_ap.c index 45c05527a57a..faf4b4158cfa 100644 --- a/drivers/staging/rtl8723bs/core/rtw_ap.c +++ b/drivers/staging/rtl8723bs/core/rtw_ap.c @@ -1051,7 +1051,7 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf, int len) return _FAIL; - if (len > MAX_IE_SZ) + if (len < 0 || len > MAX_IE_SZ) return _FAIL; pbss_network->IELength = len; -- cgit v1.2.3 From 3284da34a87ab7a527a593f89bbdaf6debe9e713 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Tue, 12 Jun 2018 16:47:10 +0200 Subject: s390/dasd: reduce the default queue depth and nr of hardware queues Reduce the default values for the number of hardware queues and queue depth to significantly reduce the memory footprint of a DASD device. The memory consumption per DASD device reduces from approximately 40MB to approximately 1.5MB. This is necessary to build systems with a large number of DASD devices and a reasonable amount of memory. Performance measurements showed that good performance results are possible with the new default values even on systems with lots of CPUs and lots of alias devices. Fixes: e443343e509a ("s390/dasd: blk-mq conversion") Reviewed-by: Jan Hoeppner Reviewed-by: Peter Oberparleiter Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 13 +++++++++++-- drivers/s390/block/dasd_int.h | 8 -------- 2 files changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index d3a38c421503..a9f60d0ee02e 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -41,6 +41,15 @@ #define DASD_DIAG_MOD "dasd_diag_mod" +static unsigned int queue_depth = 32; +static unsigned int nr_hw_queues = 4; + +module_param(queue_depth, uint, 0444); +MODULE_PARM_DESC(queue_depth, "Default queue depth for new DASD devices"); + +module_param(nr_hw_queues, uint, 0444); +MODULE_PARM_DESC(nr_hw_queues, "Default number of hardware queues for new DASD devices"); + /* * SECTION: exported variables of dasd.c */ @@ -3115,8 +3124,8 @@ static int dasd_alloc_queue(struct dasd_block *block) block->tag_set.ops = &dasd_mq_ops; block->tag_set.cmd_size = sizeof(struct dasd_ccw_req); - block->tag_set.nr_hw_queues = DASD_NR_HW_QUEUES; - block->tag_set.queue_depth = DASD_MAX_LCU_DEV * DASD_REQ_PER_DEV; + block->tag_set.nr_hw_queues = nr_hw_queues; + block->tag_set.queue_depth = queue_depth; block->tag_set.flags = BLK_MQ_F_SHOULD_MERGE; rc = blk_mq_alloc_tag_set(&block->tag_set); diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h index 976b6bd4fb05..de6b96036aa4 100644 --- a/drivers/s390/block/dasd_int.h +++ b/drivers/s390/block/dasd_int.h @@ -228,14 +228,6 @@ struct dasd_ccw_req { #define DASD_CQR_SUPPRESS_IL 6 /* Suppress 'Incorrect Length' error */ #define DASD_CQR_SUPPRESS_CR 7 /* Suppress 'Command Reject' error */ -/* - * There is no reliable way to determine the number of available CPUs on - * LPAR but there is no big performance difference between 1 and the - * maximum CPU number. - * 64 is a good trade off performance wise. - */ -#define DASD_NR_HW_QUEUES 64 -#define DASD_MAX_LCU_DEV 256 #define DASD_REQ_PER_DEV 4 /* Signature for error recovery functions. */ -- cgit v1.2.3 From dfa758638fd2d1184760deb2693abf76e982c53a Mon Sep 17 00:00:00 2001 From: Eric Farman Date: Fri, 29 Jun 2018 19:54:01 +0200 Subject: s390/mm: fix refcount usage for 4K pgste s390 no longer uses the _mapcount field in struct page to identify the page table format being used. While the code was diligent in handling the different mappings, it neglected to turn "off" the map bits when alloc_pgste was being used. This resulted in bits remaining "on" in the _refcount field, and thus an artifically huge "in use" count that prevents the pages from actually being released by __free_page. There's opportunity for improvement in the "1 vs 3" vs "1U vs 3U" vs "0x1 vs 0x11" etc. variations for all these calls, I am just keeping things simple compared to neighboring code. Fixes: 620b4e903179 ("s390: use _refcount for pgtables") Reported-by: Halil Pasic Bisected-by: Vasily Gorbik Signed-off-by: Eric Farman Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/mm/pgalloc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/s390/mm/pgalloc.c b/arch/s390/mm/pgalloc.c index 84bd6329a88d..e3bd5627afef 100644 --- a/arch/s390/mm/pgalloc.c +++ b/arch/s390/mm/pgalloc.c @@ -252,6 +252,8 @@ void page_table_free(struct mm_struct *mm, unsigned long *table) spin_unlock_bh(&mm->context.lock); if (mask != 0) return; + } else { + atomic_xor_bits(&page->_refcount, 3U << 24); } pgtable_page_dtor(page); @@ -304,6 +306,8 @@ static void __tlb_remove_table(void *_table) break; /* fallthrough */ case 3: /* 4K page table with pgstes */ + if (mask & 3) + atomic_xor_bits(&page->_refcount, 3 << 24); pgtable_page_dtor(page); __free_page(page); break; -- cgit v1.2.3 From 07eaa43e66f505980d00e0f5fe697f3da7c6a730 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 29 May 2018 12:00:54 +0300 Subject: ARM: dts: dra7: Disable metastability workaround for USB2 Disable the metastability workaround for USB2. The original patch disabled the workaround on the wrong USB port. Fixes: b8c9c6fa2002 ("ARM: dts: dra7: Disable USB metastability workaround for USB2") Cc: [4.16+] Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 9dcd14edc202..e03495a799ce 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1580,7 +1580,6 @@ dr_mode = "otg"; snps,dis_u3_susphy_quirk; snps,dis_u2_susphy_quirk; - snps,dis_metastability_quirk; }; }; @@ -1608,6 +1607,7 @@ dr_mode = "otg"; snps,dis_u3_susphy_quirk; snps,dis_u2_susphy_quirk; + snps,dis_metastability_quirk; }; }; -- cgit v1.2.3 From 207490517cf80d99f471d1b54e747eb95a4b8bea Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Mon, 18 Jun 2018 10:45:49 -0700 Subject: bus: ti-sysc: Use 2-factor allocator arguments This adjusts the allocator calls to use 2-factor argument call style, as done treewide already for improved defense against allocation overflows. Signed-off-by: Kees Cook Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 1cc29629d238..80d60f43db56 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -169,9 +169,9 @@ static int sysc_get_clocks(struct sysc *ddata) const char *name; int nr_fck = 0, nr_ick = 0, i, error = 0; - ddata->clock_roles = devm_kzalloc(ddata->dev, - sizeof(*ddata->clock_roles) * + ddata->clock_roles = devm_kcalloc(ddata->dev, SYSC_MAX_CLOCKS, + sizeof(*ddata->clock_roles), GFP_KERNEL); if (!ddata->clock_roles) return -ENOMEM; @@ -200,8 +200,8 @@ static int sysc_get_clocks(struct sysc *ddata) return -EINVAL; } - ddata->clocks = devm_kzalloc(ddata->dev, - sizeof(*ddata->clocks) * ddata->nr_clocks, + ddata->clocks = devm_kcalloc(ddata->dev, + ddata->nr_clocks, sizeof(*ddata->clocks), GFP_KERNEL); if (!ddata->clocks) return -ENOMEM; -- cgit v1.2.3 From 603d4cf8fe095b1ee78f423d514427be507fb513 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Sat, 30 Jun 2018 17:38:55 +0200 Subject: net: fix use-after-free in GRO with ESP Since the addition of GRO for ESP, gro_receive can consume the skb and return -EINPROGRESS. In that case, the lower layer GRO handler cannot touch the skb anymore. Commit 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") converted some of the gro_receive handlers that can lead to ESP's gro_receive so that they wouldn't access the skb when -EINPROGRESS is returned, but missed other spots, mainly in tunneling protocols. This patch finishes the conversion to using skb_gro_flush_final(), and adds a new helper, skb_gro_flush_final_remcsum(), used in VXLAN and GUE. Fixes: 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") Signed-off-by: Sabrina Dubroca Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller --- drivers/net/geneve.c | 2 +- drivers/net/vxlan.c | 4 +--- include/linux/netdevice.h | 20 ++++++++++++++++++++ net/8021q/vlan.c | 2 +- net/ipv4/fou.c | 4 +--- net/ipv4/gre_offload.c | 2 +- net/ipv4/udp_offload.c | 2 +- 7 files changed, 26 insertions(+), 10 deletions(-) diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 750eaa53bf0c..ada33c2d9ac2 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -476,7 +476,7 @@ static struct sk_buff **geneve_gro_receive(struct sock *sk, out_unlock: rcu_read_unlock(); out: - NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_flush_final(skb, pp, flush); return pp; } diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index aee0e60471f1..f6bb1d54d4bd 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -623,9 +623,7 @@ static struct sk_buff **vxlan_gro_receive(struct sock *sk, flush = 0; out: - skb_gro_remcsum_cleanup(skb, &grc); - skb->remcsum_offload = 0; - NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_flush_final_remcsum(skb, pp, flush, &grc); return pp; } diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 3ec9850c7936..3d0cc0b5cec2 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2789,11 +2789,31 @@ static inline void skb_gro_flush_final(struct sk_buff *skb, struct sk_buff **pp, if (PTR_ERR(pp) != -EINPROGRESS) NAPI_GRO_CB(skb)->flush |= flush; } +static inline void skb_gro_flush_final_remcsum(struct sk_buff *skb, + struct sk_buff **pp, + int flush, + struct gro_remcsum *grc) +{ + if (PTR_ERR(pp) != -EINPROGRESS) { + NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_remcsum_cleanup(skb, grc); + skb->remcsum_offload = 0; + } +} #else static inline void skb_gro_flush_final(struct sk_buff *skb, struct sk_buff **pp, int flush) { NAPI_GRO_CB(skb)->flush |= flush; } +static inline void skb_gro_flush_final_remcsum(struct sk_buff *skb, + struct sk_buff **pp, + int flush, + struct gro_remcsum *grc) +{ + NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_remcsum_cleanup(skb, grc); + skb->remcsum_offload = 0; +} #endif static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev, diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 73a65789271b..8ccee3d01822 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -693,7 +693,7 @@ static struct sk_buff **vlan_gro_receive(struct sk_buff **head, out_unlock: rcu_read_unlock(); out: - NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_flush_final(skb, pp, flush); return pp; } diff --git a/net/ipv4/fou.c b/net/ipv4/fou.c index 1540db65241a..c9ec1603666b 100644 --- a/net/ipv4/fou.c +++ b/net/ipv4/fou.c @@ -448,9 +448,7 @@ next_proto: out_unlock: rcu_read_unlock(); out: - NAPI_GRO_CB(skb)->flush |= flush; - skb_gro_remcsum_cleanup(skb, &grc); - skb->remcsum_offload = 0; + skb_gro_flush_final_remcsum(skb, pp, flush, &grc); return pp; } diff --git a/net/ipv4/gre_offload.c b/net/ipv4/gre_offload.c index 1859c473b21a..6a7d980105f6 100644 --- a/net/ipv4/gre_offload.c +++ b/net/ipv4/gre_offload.c @@ -223,7 +223,7 @@ static struct sk_buff **gre_gro_receive(struct sk_buff **head, out_unlock: rcu_read_unlock(); out: - NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_flush_final(skb, pp, flush); return pp; } diff --git a/net/ipv4/udp_offload.c b/net/ipv4/udp_offload.c index 92dc9e5a7ff3..69c54540d5b4 100644 --- a/net/ipv4/udp_offload.c +++ b/net/ipv4/udp_offload.c @@ -394,7 +394,7 @@ unflush: out_unlock: rcu_read_unlock(); out: - NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_flush_final(skb, pp, flush); return pp; } EXPORT_SYMBOL(udp_gro_receive); -- cgit v1.2.3 From fc9c2029e37c3ae9efc28bf47045e0b87e09660c Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Sat, 30 Jun 2018 15:26:56 -0700 Subject: ipv6: sr: fix passing wrong flags to crypto_alloc_shash() The 'mask' argument to crypto_alloc_shash() uses the CRYPTO_ALG_* flags, not 'gfp_t'. So don't pass GFP_KERNEL to it. Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support") Signed-off-by: Eric Biggers Signed-off-by: David S. Miller --- net/ipv6/seg6_hmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/seg6_hmac.c b/net/ipv6/seg6_hmac.c index 33fb35cbfac1..558fe8cc6d43 100644 --- a/net/ipv6/seg6_hmac.c +++ b/net/ipv6/seg6_hmac.c @@ -373,7 +373,7 @@ static int seg6_hmac_init_algo(void) return -ENOMEM; for_each_possible_cpu(cpu) { - tfm = crypto_alloc_shash(algo->name, 0, GFP_KERNEL); + tfm = crypto_alloc_shash(algo->name, 0, 0); if (IS_ERR(tfm)) return PTR_ERR(tfm); p_tfm = per_cpu_ptr(algo->tfms, cpu); -- cgit v1.2.3 From 5dc2d3996a8b221c20dd0900bdad45031a572530 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Sun, 1 Jul 2018 16:21:21 +0800 Subject: ipvlan: call dev_change_flags when ipvlan mode is reset After we change the ipvlan mode from l3 to l2, or vice versa, we only reset IFF_NOARP flag, but don't flush the ARP table cache, which will cause eth->h_dest to be equal to eth->h_source in ipvlan_xmit_mode_l2(). Then the message will not come out of host. Here is the reproducer on local host: ip link set eth1 up ip addr add 192.168.1.1/24 dev eth1 ip link add link eth1 ipvlan1 type ipvlan mode l3 ip netns add net1 ip link set ipvlan1 netns net1 ip netns exec net1 ip link set ipvlan1 up ip netns exec net1 ip addr add 192.168.2.1/24 dev ipvlan1 ip route add 192.168.2.0/24 via 192.168.1.2 ping 192.168.2.2 -c 2 ip netns exec net1 ip link set ipvlan1 type ipvlan mode l2 ping 192.168.2.2 -c 2 Add the same configuration on remote host. After we set the mode to l2, we could find that the src/dst MAC addresses are the same on eth1: 21:26:06.648565 00:b7:13:ad:d3:05 > 00:b7:13:ad:d3:05, ethertype IPv4 (0x0800), length 98: (tos 0x0, ttl 64, id 58356, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.2.1 > 192.168.2.2: ICMP echo request, id 22686, seq 1, length 64 Fix this by calling dev_change_flags(), which will call netdevice notifier with flag change info. v2: a) As pointed out by Wang Cong, check return value for dev_change_flags() when change dev flags. b) As suggested by Stefano and Sabrina, move flags setting before l3mdev_ops. So we don't need to redo ipvlan_{, un}register_nf_hook() again in err path. Reported-by: Jianlin Shi Reviewed-by: Stefano Brivio Reviewed-by: Sabrina Dubroca Fixes: 2ad7bf3638411 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller --- drivers/net/ipvlan/ipvlan_main.c | 36 ++++++++++++++++++++++++++++-------- 1 file changed, 28 insertions(+), 8 deletions(-) diff --git a/drivers/net/ipvlan/ipvlan_main.c b/drivers/net/ipvlan/ipvlan_main.c index 23c1d6600241..4a949569ec4c 100644 --- a/drivers/net/ipvlan/ipvlan_main.c +++ b/drivers/net/ipvlan/ipvlan_main.c @@ -75,10 +75,23 @@ static int ipvlan_set_port_mode(struct ipvl_port *port, u16 nval) { struct ipvl_dev *ipvlan; struct net_device *mdev = port->dev; - int err = 0; + unsigned int flags; + int err; ASSERT_RTNL(); if (port->mode != nval) { + list_for_each_entry(ipvlan, &port->ipvlans, pnode) { + flags = ipvlan->dev->flags; + if (nval == IPVLAN_MODE_L3 || nval == IPVLAN_MODE_L3S) { + err = dev_change_flags(ipvlan->dev, + flags | IFF_NOARP); + } else { + err = dev_change_flags(ipvlan->dev, + flags & ~IFF_NOARP); + } + if (unlikely(err)) + goto fail; + } if (nval == IPVLAN_MODE_L3S) { /* New mode is L3S */ err = ipvlan_register_nf_hook(read_pnet(&port->pnet)); @@ -86,21 +99,28 @@ static int ipvlan_set_port_mode(struct ipvl_port *port, u16 nval) mdev->l3mdev_ops = &ipvl_l3mdev_ops; mdev->priv_flags |= IFF_L3MDEV_MASTER; } else - return err; + goto fail; } else if (port->mode == IPVLAN_MODE_L3S) { /* Old mode was L3S */ mdev->priv_flags &= ~IFF_L3MDEV_MASTER; ipvlan_unregister_nf_hook(read_pnet(&port->pnet)); mdev->l3mdev_ops = NULL; } - list_for_each_entry(ipvlan, &port->ipvlans, pnode) { - if (nval == IPVLAN_MODE_L3 || nval == IPVLAN_MODE_L3S) - ipvlan->dev->flags |= IFF_NOARP; - else - ipvlan->dev->flags &= ~IFF_NOARP; - } port->mode = nval; } + return 0; + +fail: + /* Undo the flags changes that have been done so far. */ + list_for_each_entry_continue_reverse(ipvlan, &port->ipvlans, pnode) { + flags = ipvlan->dev->flags; + if (port->mode == IPVLAN_MODE_L3 || + port->mode == IPVLAN_MODE_L3S) + dev_change_flags(ipvlan->dev, flags | IFF_NOARP); + else + dev_change_flags(ipvlan->dev, flags & ~IFF_NOARP); + } + return err; } -- cgit v1.2.3 From bb7858ba1102f82470a917e041fd23e6385c31be Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Sun, 1 Jul 2018 20:03:05 -0700 Subject: qed: Limit msix vectors in kdump kernel to the minimum required count. Memory size is limited in the kdump kernel environment. Allocation of more msix-vectors (or queues) consumes few tens of MBs of memory, which might lead to the kdump kernel failure. This patch adds changes to limit the number of MSI-X vectors in kdump kernel to minimum required value (i.e., 2 per engine). Fixes: fe56b9e6a ("qed: Add module with basic common support") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_main.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index 5c10fd7210c3..0cbc74d6ca8b 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -789,6 +789,14 @@ static int qed_slowpath_setup_int(struct qed_dev *cdev, /* We want a minimum of one slowpath and one fastpath vector per hwfn */ cdev->int_params.in.min_msix_cnt = cdev->num_hwfns * 2; + if (is_kdump_kernel()) { + DP_INFO(cdev, + "Kdump kernel: Limit the max number of requested MSI-X vectors to %hd\n", + cdev->int_params.in.min_msix_cnt); + cdev->int_params.in.num_vectors = + cdev->int_params.in.min_msix_cnt; + } + rc = qed_set_int_mode(cdev, false); if (rc) { DP_ERR(cdev, "qed_slowpath_setup_int ERR\n"); -- cgit v1.2.3 From 538f8d00ba8bb417c4d9e76c61dee59d812d8287 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Sun, 1 Jul 2018 20:03:06 -0700 Subject: qed: Fix setting of incorrect eswitch mode. By default, driver sets the eswitch mode incorrectly as VEB (virtual Ethernet bridging). Need to set VEB eswitch mode only when sriov is enabled, and it should be to set NONE by default. The patch incorporates this change. Fixes: 0fefbfbaa ("qed*: Management firmware - notifications and defaults") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 2 +- drivers/net/ethernet/qlogic/qed/qed_sriov.c | 19 +++++++++++++++++-- 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 329781cda77f..e5249b4741d0 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -1804,7 +1804,7 @@ int qed_hw_init(struct qed_dev *cdev, struct qed_hw_init_params *p_params) DP_INFO(p_hwfn, "Failed to update driver state\n"); rc = qed_mcp_ov_update_eswitch(p_hwfn, p_hwfn->p_main_ptt, - QED_OV_ESWITCH_VEB); + QED_OV_ESWITCH_NONE); if (rc) DP_INFO(p_hwfn, "Failed to update eswitch mode\n"); } diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c index f01bf52bc381..fd59cf45f4be 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c @@ -4513,6 +4513,8 @@ static void qed_sriov_enable_qid_config(struct qed_hwfn *hwfn, static int qed_sriov_enable(struct qed_dev *cdev, int num) { struct qed_iov_vf_init_params params; + struct qed_hwfn *hwfn; + struct qed_ptt *ptt; int i, j, rc; if (num >= RESC_NUM(&cdev->hwfns[0], QED_VPORT)) { @@ -4525,8 +4527,8 @@ static int qed_sriov_enable(struct qed_dev *cdev, int num) /* Initialize HW for VF access */ for_each_hwfn(cdev, j) { - struct qed_hwfn *hwfn = &cdev->hwfns[j]; - struct qed_ptt *ptt = qed_ptt_acquire(hwfn); + hwfn = &cdev->hwfns[j]; + ptt = qed_ptt_acquire(hwfn); /* Make sure not to use more than 16 queues per VF */ params.num_queues = min_t(int, @@ -4562,6 +4564,19 @@ static int qed_sriov_enable(struct qed_dev *cdev, int num) goto err; } + hwfn = QED_LEADING_HWFN(cdev); + ptt = qed_ptt_acquire(hwfn); + if (!ptt) { + DP_ERR(hwfn, "Failed to acquire ptt\n"); + rc = -EBUSY; + goto err; + } + + rc = qed_mcp_ov_update_eswitch(hwfn, ptt, QED_OV_ESWITCH_VEB); + if (rc) + DP_INFO(cdev, "Failed to update eswitch mode\n"); + qed_ptt_release(hwfn, ptt); + return num; err: -- cgit v1.2.3 From cc9b27cdf7bd3c86df73439758ac1564bc8f5bbe Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Sun, 1 Jul 2018 20:03:07 -0700 Subject: qed: Fix use of incorrect size in memcpy call. Use the correct size value while copying chassis/port id values. Fixes: 6ad8c632e ("qed: Add support for query/config dcbx.") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index f0b01385d5cb..e0680ce91328 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -709,9 +709,9 @@ qed_dcbx_get_local_lldp_params(struct qed_hwfn *p_hwfn, p_local = &p_hwfn->p_dcbx_info->lldp_local[LLDP_NEAREST_BRIDGE]; memcpy(params->lldp_local.local_chassis_id, p_local->local_chassis_id, - ARRAY_SIZE(p_local->local_chassis_id)); + sizeof(p_local->local_chassis_id)); memcpy(params->lldp_local.local_port_id, p_local->local_port_id, - ARRAY_SIZE(p_local->local_port_id)); + sizeof(p_local->local_port_id)); } static void @@ -723,9 +723,9 @@ qed_dcbx_get_remote_lldp_params(struct qed_hwfn *p_hwfn, p_remote = &p_hwfn->p_dcbx_info->lldp_remote[LLDP_NEAREST_BRIDGE]; memcpy(params->lldp_remote.peer_chassis_id, p_remote->peer_chassis_id, - ARRAY_SIZE(p_remote->peer_chassis_id)); + sizeof(p_remote->peer_chassis_id)); memcpy(params->lldp_remote.peer_port_id, p_remote->peer_port_id, - ARRAY_SIZE(p_remote->peer_port_id)); + sizeof(p_remote->peer_port_id)); } static int -- cgit v1.2.3 From 82a4e71b1565dea8387f54503e806cf374e779ec Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Sun, 1 Jul 2018 20:03:08 -0700 Subject: qede: Adverstise software timestamp caps when PHC is not available. When ptp clock is not available for a PF (e.g., higher PFs in NPAR mode), get-tsinfo() callback should return the software timestamp capabilities instead of returning the error. Fixes: 4c55215c ("qede: Add driver support for PTP") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_ptp.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qede/qede_ptp.c b/drivers/net/ethernet/qlogic/qede/qede_ptp.c index 02adb513f475..013ff567283c 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_ptp.c +++ b/drivers/net/ethernet/qlogic/qede/qede_ptp.c @@ -337,8 +337,14 @@ int qede_ptp_get_ts_info(struct qede_dev *edev, struct ethtool_ts_info *info) { struct qede_ptp *ptp = edev->ptp; - if (!ptp) - return -EIO; + if (!ptp) { + info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE; + info->phc_index = -1; + + return 0; + } info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE | SOF_TIMESTAMPING_RX_SOFTWARE | -- cgit v1.2.3 From fe6e04941aa12479a1a58656362bec74100bf7d7 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 29 Jun 2018 19:01:44 +0900 Subject: mmc: renesas_sdhi_internal_dmac: Fix missing unmap in error patch This patch fixes an issue that lacks the dma_unmap_sg() calling in the error patch of renesas_sdhi_internal_dmac_start_dma(). Fixes: 0cbc94daa554 ("mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCs") Cc: # v4.17+ Signed-off-by: Yoshihiro Shimoda Reviewed-by: Geert Uytterhoeven Reviewed-by: Simon Horman Signed-off-by: Ulf Hansson --- drivers/mmc/host/renesas_sdhi_internal_dmac.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c index f7f9773d161f..d676a20d959f 100644 --- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c @@ -164,17 +164,14 @@ renesas_sdhi_internal_dmac_start_dma(struct tmio_mmc_host *host, goto force_pio; /* This DMAC cannot handle if buffer is not 8-bytes alignment */ - if (!IS_ALIGNED(sg_dma_address(sg), 8)) { - dma_unmap_sg(&host->pdev->dev, sg, host->sg_len, - mmc_get_dma_dir(data)); - goto force_pio; - } + if (!IS_ALIGNED(sg_dma_address(sg), 8)) + goto force_pio_with_unmap; if (data->flags & MMC_DATA_READ) { dtran_mode |= DTRAN_MODE_CH_NUM_CH1; if (test_bit(SDHI_INTERNAL_DMAC_ONE_RX_ONLY, &global_flags) && test_and_set_bit(SDHI_INTERNAL_DMAC_RX_IN_USE, &global_flags)) - goto force_pio; + goto force_pio_with_unmap; } else { dtran_mode |= DTRAN_MODE_CH_NUM_CH0; } @@ -189,6 +186,9 @@ renesas_sdhi_internal_dmac_start_dma(struct tmio_mmc_host *host, return; +force_pio_with_unmap: + dma_unmap_sg(&host->pdev->dev, sg, host->sg_len, mmc_get_dma_dir(data)); + force_pio: host->force_pio = true; renesas_sdhi_internal_dmac_enable_dma(host, false); -- cgit v1.2.3 From 25a98edd5795719c5187e16ea271e8de86e02809 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 29 Jun 2018 19:01:45 +0900 Subject: mmc: renesas_sdhi_internal_dmac: Cannot clear the RX_IN_USE in abort This patch is fixes an issue that the SDHI_INTERNAL_DMAC_RX_IN_USE flag cannot be cleared because tmio_mmc_core sets the host->data to NULL before the tmio_mmc_core calls tmio_mmc_abort_dma(). So, this patch clears the SDHI_INTERNAL_DMAC_RX_IN_USE in the renesas_sdhi_internal_dmac_abort_dma() anyway. This doesn't cause any side effects. Fixes: 0cbc94daa554 ("mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCs") Cc: # v4.17+ Signed-off-by: Yoshihiro Shimoda Reviewed-by: Geert Uytterhoeven Reviewed-by: Simon Horman Signed-off-by: Ulf Hansson --- drivers/mmc/host/renesas_sdhi_internal_dmac.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c index d676a20d959f..d032bd63444d 100644 --- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c @@ -139,8 +139,7 @@ renesas_sdhi_internal_dmac_abort_dma(struct tmio_mmc_host *host) { renesas_sdhi_internal_dmac_dm_write(host, DM_CM_RST, RST_RESERVED_BITS | val); - if (host->data && host->data->flags & MMC_DATA_READ) - clear_bit(SDHI_INTERNAL_DMAC_RX_IN_USE, &global_flags); + clear_bit(SDHI_INTERNAL_DMAC_RX_IN_USE, &global_flags); renesas_sdhi_internal_dmac_enable_dma(host, true); } -- cgit v1.2.3 From aaa23f86001bdb82d2f937c5c7bce0a1e11a6c5b Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 27 Jun 2018 07:25:32 +0100 Subject: ALSA: hda - Handle pm failure during hotplug Obtaining the runtime pm wakeref can fail, especially in a hotplug scenario where i915.ko has been unloaded. If we do not catch the failure, we end up with an unbalanced pm. v2 additions by tiwai: hdmi_present_sense() checks the return value and handle only a negative error case and bails out only if it's really still suspended. Also, snd_hda_power_down() is called at the error path so that the refcount is balanced. Along with it, the spec->pcm_lock is taken outside hdmi_present_sense() in the caller side, so that it won't cause deadlock at reentrace via runtime resume. v3 fix by tiwai: Missing linux/pm_runtime.h is included. References: 222bde03881c ("ALSA: hda - Fix mutex deadlock at HDMI/DP hotplug") Signed-off-by: Chris Wilson Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 98e1c411c56a..8a49415aebac 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -764,8 +765,10 @@ static void check_presence_and_report(struct hda_codec *codec, hda_nid_t nid, if (pin_idx < 0) return; + mutex_lock(&spec->pcm_lock); if (hdmi_present_sense(get_pin(spec, pin_idx), 1)) snd_hda_jack_report_sync(codec); + mutex_unlock(&spec->pcm_lock); } static void jack_callback(struct hda_codec *codec, @@ -1628,21 +1631,23 @@ static void sync_eld_via_acomp(struct hda_codec *codec, static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll) { struct hda_codec *codec = per_pin->codec; - struct hdmi_spec *spec = codec->spec; int ret; /* no temporary power up/down needed for component notifier */ - if (!codec_has_acomp(codec)) - snd_hda_power_up_pm(codec); + if (!codec_has_acomp(codec)) { + ret = snd_hda_power_up_pm(codec); + if (ret < 0 && pm_runtime_suspended(hda_codec_dev(codec))) { + snd_hda_power_down_pm(codec); + return false; + } + } - mutex_lock(&spec->pcm_lock); if (codec_has_acomp(codec)) { sync_eld_via_acomp(codec, per_pin); ret = false; /* don't call snd_hda_jack_report_sync() */ } else { ret = hdmi_present_sense_via_verbs(per_pin, repoll); } - mutex_unlock(&spec->pcm_lock); if (!codec_has_acomp(codec)) snd_hda_power_down_pm(codec); @@ -1654,12 +1659,16 @@ static void hdmi_repoll_eld(struct work_struct *work) { struct hdmi_spec_per_pin *per_pin = container_of(to_delayed_work(work), struct hdmi_spec_per_pin, work); + struct hda_codec *codec = per_pin->codec; + struct hdmi_spec *spec = codec->spec; if (per_pin->repoll_count++ > 6) per_pin->repoll_count = 0; + mutex_lock(&spec->pcm_lock); if (hdmi_present_sense(per_pin, per_pin->repoll_count)) snd_hda_jack_report_sync(per_pin->codec); + mutex_unlock(&spec->pcm_lock); } static void intel_haswell_fixup_connect_list(struct hda_codec *codec, -- cgit v1.2.3 From 64dafbc9530c10300acffc57fae3269d95fa8f93 Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Mon, 25 Jun 2018 11:39:52 +0200 Subject: drbd: fix access after free We have struct drbd_requests { ... struct bio *private_bio; ... } to hold a bio clone for local submission. On local IO completion, we put that bio, and in case we want to use the result later, we overload that member to hold the ERR_PTR() of the completion result, Which, before v4.3, used to be the passed in "int error", so we could first bio_put(), then assign. v4.3-rc1~100^2~21 4246a0b63bd8 block: add a bi_error field to struct bio changed that: bio_put(req->private_bio); - req->private_bio = ERR_PTR(error); + req->private_bio = ERR_PTR(bio->bi_error); Which introduces an access after free, because it was non obvious that req->private_bio == bio. Impact of that was mostly unnoticable, because we only use that value in a multiple-failure case, and even then map any "unexpected" error code to EIO, so worst case we could potentially mask a more specific error with EIO in a multiple failure case. Unless the pointed to memory region was unmapped, as is the case with CONFIG_DEBUG_PAGEALLOC, in which case this results in BUG: unable to handle kernel paging request v4.13-rc1~70^2~75 4e4cbee93d56 block: switch bios to blk_status_t changes it further to bio_put(req->private_bio); req->private_bio = ERR_PTR(blk_status_to_errno(bio->bi_status)); And blk_status_to_errno() now contains a WARN_ON_ONCE() for unexpected values, which catches this "sometimes", if the memory has been reused quickly enough for other things. Should also go into stable since 4.3, with the trivial change around 4.13. Cc: stable@vger.kernel.org Fixes: 4246a0b63bd8 block: add a bi_error field to struct bio Reported-by: Sarah Newman Signed-off-by: Lars Ellenberg Signed-off-by: Jens Axboe --- drivers/block/drbd/drbd_worker.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c index 1476cb3439f4..5e793dd7adfb 100644 --- a/drivers/block/drbd/drbd_worker.c +++ b/drivers/block/drbd/drbd_worker.c @@ -282,8 +282,8 @@ void drbd_request_endio(struct bio *bio) what = COMPLETED_OK; } - bio_put(req->private_bio); req->private_bio = ERR_PTR(blk_status_to_errno(bio->bi_status)); + bio_put(bio); /* not req_mod(), we need irqsave here! */ spin_lock_irqsave(&device->resource->req_lock, flags); -- cgit v1.2.3 From 8740fa6f5c834a881b9b0d560e62c6fe3c1e60ef Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 2 Jul 2018 08:30:22 +0100 Subject: sata_nv: remove redundant pointers sdev0 and sdev1 Pointers sdev0 and sdev1 are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'sdev0' set but not used [-Wunused-but-set-variable] warning: variable 'sdev1' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King Signed-off-by: Tejun Heo --- drivers/ata/sata_nv.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 10ae11aa1926..72c9b922a77b 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -675,7 +675,6 @@ static int nv_adma_slave_config(struct scsi_device *sdev) struct ata_port *ap = ata_shost_to_port(sdev->host); struct nv_adma_port_priv *pp = ap->private_data; struct nv_adma_port_priv *port0, *port1; - struct scsi_device *sdev0, *sdev1; struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned long segment_boundary, flags; unsigned short sg_tablesize; @@ -736,8 +735,6 @@ static int nv_adma_slave_config(struct scsi_device *sdev) port0 = ap->host->ports[0]->private_data; port1 = ap->host->ports[1]->private_data; - sdev0 = ap->host->ports[0]->link.device[0].sdev; - sdev1 = ap->host->ports[1]->link.device[0].sdev; if ((port0->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) || (port1->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)) { /* -- cgit v1.2.3 From 240630e61870e62e39a97225048f9945848fa5f5 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 1 Jul 2018 12:15:46 +0200 Subject: ahci: Disable LPM on Lenovo 50 series laptops with a too old BIOS There have been several reports of LPM related hard freezes about once a day on multiple Lenovo 50 series models. Strange enough these reports where not disk model specific as LPM issues usually are and some users with the exact same disk + laptop where seeing them while other users where not seeing these issues. It turns out that enabling LPM triggers a firmware bug somewhere, which has been fixed in later BIOS versions. This commit adds a new ahci_broken_lpm() function and a new ATA_FLAG_NO_LPM for dealing with this. The ahci_broken_lpm() function contains DMI match info for the 4 models which are known to be affected by this and the DMI BIOS date field for known good BIOS versions. If the BIOS date is older then the one in the table LPM will be disabled and a warning will be printed. Note the BIOS dates are for known good versions, some older versions may work too, but we don't know for sure, the table is using dates from BIOS versions for which users have confirmed that upgrading to that version makes the problem go away. Unfortunately I've been unable to get hold of the reporter who reported that BIOS version 2.35 fixed the problems on the W541 for him. I've been able to verify the DMI_SYS_VENDOR and DMI_PRODUCT_VERSION from an older dmidecode, but I don't know the exact BIOS date as reported in the DMI. Lenovo keeps a changelog with dates in their release notes, but the dates there are the release dates not the build dates which are in DMI. So I've chosen to set the date to which we compare to one day past the release date of the 2.34 BIOS. I plan to fix this with a follow up commit once I've the necessary info. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Signed-off-by: Tejun Heo --- drivers/ata/ahci.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/ata/libata-core.c | 3 +++ include/linux/libata.h | 1 + 3 files changed, 63 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 738fb22978dd..fdeb3b4d0f4a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1280,6 +1280,59 @@ static bool ahci_broken_suspend(struct pci_dev *pdev) return strcmp(buf, dmi->driver_data) < 0; } +static bool ahci_broken_lpm(struct pci_dev *pdev) +{ + static const struct dmi_system_id sysids[] = { + /* Various Lenovo 50 series have LPM issues with older BIOSen */ + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X250"), + }, + .driver_data = "20180406", /* 1.31 */ + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L450"), + }, + .driver_data = "20180420", /* 1.28 */ + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T450s"), + }, + .driver_data = "20180315", /* 1.33 */ + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad W541"), + }, + /* + * Note date based on release notes, 2.35 has been + * reported to be good, but I've been unable to get + * a hold of the reporter to get the DMI BIOS date. + * TODO: fix this. + */ + .driver_data = "20180310", /* 2.35 */ + }, + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(sysids); + int year, month, date; + char buf[9]; + + if (!dmi) + return false; + + dmi_get_date(DMI_BIOS_DATE, &year, &month, &date); + snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date); + + return strcmp(buf, dmi->driver_data) < 0; +} + static bool ahci_broken_online(struct pci_dev *pdev) { #define ENCODE_BUSDEVFN(bus, slot, func) \ @@ -1694,6 +1747,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) "quirky BIOS, skipping spindown on poweroff\n"); } + if (ahci_broken_lpm(pdev)) { + pi.flags |= ATA_FLAG_NO_LPM; + dev_warn(&pdev->dev, + "BIOS update required for Link Power Management support\n"); + } + if (ahci_broken_suspend(pdev)) { hpriv->flags |= AHCI_HFLAG_NO_SUSPEND; dev_warn(&pdev->dev, diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 27d15ed7fa3d..cc71c63df381 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2493,6 +2493,9 @@ int ata_dev_configure(struct ata_device *dev) (id[ATA_ID_SATA_CAPABILITY] & 0xe) == 0x2) dev->horkage |= ATA_HORKAGE_NOLPM; + if (ap->flags & ATA_FLAG_NO_LPM) + dev->horkage |= ATA_HORKAGE_NOLPM; + if (dev->horkage & ATA_HORKAGE_NOLPM) { ata_dev_warn(dev, "LPM support broken, forcing max_power\n"); dev->link->ap->target_lpm_policy = ATA_LPM_MAX_POWER; diff --git a/include/linux/libata.h b/include/linux/libata.h index a2257e380789..32f247cb5e9e 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -210,6 +210,7 @@ enum { ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */ /* (doesn't imply presence) */ ATA_FLAG_SATA = (1 << 1), + ATA_FLAG_NO_LPM = (1 << 2), /* host not happy with LPM */ ATA_FLAG_NO_LOG_PAGE = (1 << 5), /* do not issue log page read */ ATA_FLAG_NO_ATAPI = (1 << 6), /* No ATAPI support */ ATA_FLAG_PIO_DMA = (1 << 7), /* PIO cmds via DMA */ -- cgit v1.2.3 From 74cb319bd97dd62881f97ea5a3228f7c2546bf56 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Mon, 2 Jul 2018 17:13:31 +0300 Subject: usb: xhci: dbc: Don't decrement runtime PM counter if DBC is not started pm_runtime_put_sync() gets called everytime in xhci_dbc_stop(). If dbc is not started, this makes the runtime PM counter incorrectly becomes 0, and calls autosuspend function. Then we'll keep seeing this: [54664.762220] xhci_hcd 0000:00:14.0: Root hub is not suspended So only calls pm_runtime_put_sync() when dbc was started. Signed-off-by: Kai-Heng Feng Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-dbgcap.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index 1fbfd89d0a0f..387f124a8334 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -508,16 +508,18 @@ static int xhci_do_dbc_start(struct xhci_hcd *xhci) return 0; } -static void xhci_do_dbc_stop(struct xhci_hcd *xhci) +static int xhci_do_dbc_stop(struct xhci_hcd *xhci) { struct xhci_dbc *dbc = xhci->dbc; if (dbc->state == DS_DISABLED) - return; + return -1; writel(0, &dbc->regs->control); xhci_dbc_mem_cleanup(xhci); dbc->state = DS_DISABLED; + + return 0; } static int xhci_dbc_start(struct xhci_hcd *xhci) @@ -544,6 +546,7 @@ static int xhci_dbc_start(struct xhci_hcd *xhci) static void xhci_dbc_stop(struct xhci_hcd *xhci) { + int ret; unsigned long flags; struct xhci_dbc *dbc = xhci->dbc; struct dbc_port *port = &dbc->port; @@ -556,10 +559,11 @@ static void xhci_dbc_stop(struct xhci_hcd *xhci) xhci_dbc_tty_unregister_device(xhci); spin_lock_irqsave(&dbc->lock, flags); - xhci_do_dbc_stop(xhci); + ret = xhci_do_dbc_stop(xhci); spin_unlock_irqrestore(&dbc->lock, flags); - pm_runtime_put_sync(xhci_to_hcd(xhci)->self.controller); + if (!ret) + pm_runtime_put_sync(xhci_to_hcd(xhci)->self.controller); } static void -- cgit v1.2.3 From 146971e6244b18eca60f614a1b94048844066d23 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 1 Jul 2018 11:48:34 +0200 Subject: typec: tcpm: Correctly report power_supply current and voltage for non pd supply Commit f2a8aa053c17 ("typec: tcpm: Represent source supply through power_supply") moved the code to register a power_supply representing the device supplying power to the type-C connector, from the fusb302 code to the generic tcpm code so that we have a psy reporting the supply voltage and current for all tcpm devices. This broke the reporting of current and voltage through the psy interface when supplied by a a non pd supply (5V, current as reported by get_current_limit). The cause of this breakage is port->supply_voltage and port->current_limit not being set in that case. This commit fixes this by setting port->supply_voltage and port->current_limit from tcpm_set_current_limit(). This commit also removes setting supply_voltage and current_limit from tcpm_reset_port() as that calls tcpm_set_current_limit(0, 0) which now already sets these to 0. Fixes: f2a8aa053c17 ("typec: tcpm: Represent source supply through...") Signed-off-by: Hans de Goede Reviewed-by: Guenter Roeck Reviewed-by: Adam Thomson Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c index d961f1ec0e08..150f43668bec 100644 --- a/drivers/usb/typec/tcpm.c +++ b/drivers/usb/typec/tcpm.c @@ -725,6 +725,9 @@ static int tcpm_set_current_limit(struct tcpm_port *port, u32 max_ma, u32 mv) tcpm_log(port, "Setting voltage/current limit %u mV %u mA", mv, max_ma); + port->supply_voltage = mv; + port->current_limit = max_ma; + if (port->tcpc->set_current_limit) ret = port->tcpc->set_current_limit(port->tcpc, max_ma, mv); @@ -2595,8 +2598,6 @@ static void tcpm_reset_port(struct tcpm_port *port) tcpm_set_attached_state(port, false); port->try_src_count = 0; port->try_snk_count = 0; - port->supply_voltage = 0; - port->current_limit = 0; port->usb_type = POWER_SUPPLY_USB_TYPE_C; power_supply_changed(port->psy); -- cgit v1.2.3 From b3a653288e1aeebcc7367dc6d5a42bccbff8bde1 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 1 Jul 2018 11:48:35 +0200 Subject: i2c-cht-wc: Fix bq24190 supplier Commit f2a8aa053c17 ("typec: tcpm: Represent source supply through power_supply") moved the code to register a power_supply representing the device supplying power to the type-C connector, from the fusb302 code to the generic tcpm code. This has caused the power-supply registered by the fusb302 driver, which determines how much current the bq24190 can draw, to change name from "fusb302-typec-source" to "tcpm-source-psy-i2c-fusb302". Fixes: f2a8aa053c17 ("typec: tcpm: Represent source supply through...") Signed-off-by: Hans de Goede Acked-by: Wolfram Sang Reviewed-by: Guenter Roeck Acked-by: Adam Thomson Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-cht-wc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c index 44cffad43701..c4d176f5ed79 100644 --- a/drivers/i2c/busses/i2c-cht-wc.c +++ b/drivers/i2c/busses/i2c-cht-wc.c @@ -234,7 +234,8 @@ static const struct irq_chip cht_wc_i2c_irq_chip = { .name = "cht_wc_ext_chrg_irq_chip", }; -static const char * const bq24190_suppliers[] = { "fusb302-typec-source" }; +static const char * const bq24190_suppliers[] = { + "tcpm-source-psy-i2c-fusb302" }; static const struct property_entry bq24190_props[] = { PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_suppliers), -- cgit v1.2.3 From ba44579141f9e2c0229e6e7eeb00b5fa68f0f74a Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 27 Jun 2018 15:15:40 +0300 Subject: ahci: Add Intel Ice Lake LP PCI ID This should also be using the default LPM policy for mobile chipsets so add the PCI ID to the driver list of supported devices. Signed-off-by: Mika Westerberg Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/ahci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index fdeb3b4d0f4a..b2b9eba1d214 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -400,6 +400,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x0f23), board_ahci_mobile }, /* Bay Trail AHCI */ { PCI_VDEVICE(INTEL, 0x22a3), board_ahci_mobile }, /* Cherry Tr. AHCI */ { PCI_VDEVICE(INTEL, 0x5ae3), board_ahci_mobile }, /* ApolloLake AHCI */ + { PCI_VDEVICE(INTEL, 0x34d3), board_ahci_mobile }, /* Ice Lake LP AHCI */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, -- cgit v1.2.3 From b320a0a9f23c98f21631eb27bcbbca91c79b1c6e Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Tue, 26 Jun 2018 20:56:54 +0900 Subject: ata: Fix ZBC_OUT command block check The block (LBA) specified must not exceed the last addressable LBA, which is dev->nr_sectors - 1. So fix the correct check is "if (block >= dev->n_sectors)" and not "if (block > dev->n_sectords)". Additionally, the asc/ascq to return for an LBA that is not a zone start LBA should be ILLEGAL REQUEST, regardless if the bad LBA is out of range. Reported-by: David Butterfield Signed-off-by: Damien Le Moal Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo --- drivers/ata/libata-scsi.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 6a91d04351d9..a5543751f446 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3805,8 +3805,13 @@ static unsigned int ata_scsi_zbc_out_xlat(struct ata_queued_cmd *qc) */ goto invalid_param_len; } - if (block > dev->n_sectors) - goto out_of_range; + if (block >= dev->n_sectors) { + /* + * Block must be a valid zone ID (a zone start LBA). + */ + fp = 2; + goto invalid_fld; + } all = cdb[14] & 0x1; @@ -3837,10 +3842,6 @@ static unsigned int ata_scsi_zbc_out_xlat(struct ata_queued_cmd *qc) invalid_fld: ata_scsi_set_invalid_field(qc->dev, scmd, fp, 0xff); return 1; - out_of_range: - /* "Logical Block Address out of range" */ - ata_scsi_set_sense(qc->dev, scmd, ILLEGAL_REQUEST, 0x21, 0x00); - return 1; invalid_param_len: /* "Parameter list length error" */ ata_scsi_set_sense(qc->dev, scmd, ILLEGAL_REQUEST, 0x1a, 0x0); -- cgit v1.2.3 From 6edf1d4cb0acde3a0a5dac849f33031bd7abb7b1 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Tue, 26 Jun 2018 20:56:55 +0900 Subject: ata: Fix ZBC_OUT all bit handling If the ALL bit is set in the ZBC_OUT command, the command zone ID field (block) should be ignored. Reported-by: David Butterfield Signed-off-by: Damien Le Moal Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo --- drivers/ata/libata-scsi.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index a5543751f446..aad1b01447de 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3805,7 +3805,14 @@ static unsigned int ata_scsi_zbc_out_xlat(struct ata_queued_cmd *qc) */ goto invalid_param_len; } - if (block >= dev->n_sectors) { + + all = cdb[14] & 0x1; + if (all) { + /* + * Ignore the block address (zone ID) as defined by ZBC. + */ + block = 0; + } else if (block >= dev->n_sectors) { /* * Block must be a valid zone ID (a zone start LBA). */ @@ -3813,8 +3820,6 @@ static unsigned int ata_scsi_zbc_out_xlat(struct ata_queued_cmd *qc) goto invalid_fld; } - all = cdb[14] & 0x1; - if (ata_ncq_enabled(qc->dev) && ata_fpdma_zac_mgmt_out_supported(qc->dev)) { tf->protocol = ATA_PROT_NCQ_NODATA; -- cgit v1.2.3 From 718b5406cd76f1aa6434311241b7febf0e8571ff Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Fri, 29 Jun 2018 16:27:10 +0200 Subject: drm: Use kvzalloc for allocating blob property memory MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The property size may be controlled by userspace, can be large (I've seen failure with order 4, i.e. 16 pages / 64 KB) and doesn't need to be physically contiguous. Signed-off-by: Michel Dänzer Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Link: https://patchwork.freedesktop.org/patch/msgid/20180629142710.2069-1-michel@daenzer.net Cc: stable@vger.kernel.org --- drivers/gpu/drm/drm_property.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_property.c b/drivers/gpu/drm/drm_property.c index 1f8031e30f53..cdb10f885a4f 100644 --- a/drivers/gpu/drm/drm_property.c +++ b/drivers/gpu/drm/drm_property.c @@ -532,7 +532,7 @@ static void drm_property_free_blob(struct kref *kref) drm_mode_object_unregister(blob->dev, &blob->base); - kfree(blob); + kvfree(blob); } /** @@ -559,7 +559,7 @@ drm_property_create_blob(struct drm_device *dev, size_t length, if (!length || length > ULONG_MAX - sizeof(struct drm_property_blob)) return ERR_PTR(-EINVAL); - blob = kzalloc(sizeof(struct drm_property_blob)+length, GFP_KERNEL); + blob = kvzalloc(sizeof(struct drm_property_blob)+length, GFP_KERNEL); if (!blob) return ERR_PTR(-ENOMEM); @@ -576,7 +576,7 @@ drm_property_create_blob(struct drm_device *dev, size_t length, ret = __drm_mode_object_add(dev, &blob->base, DRM_MODE_OBJECT_BLOB, true, drm_property_free_blob); if (ret) { - kfree(blob); + kvfree(blob); return ERR_PTR(-EINVAL); } -- cgit v1.2.3 From 0859df22ab7cfb3ad2df2caed76cadce6ac33a80 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 28 Jun 2018 12:38:53 -0500 Subject: drm/amdgpu: fix swapped emit_ib_size in vce3 The phys and vm versions had the values swapped. Reviewed-by: Junwei Zhang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/vce_v3_0.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c index 0999c843f623..a71b97519cc0 100644 --- a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c @@ -900,7 +900,7 @@ static const struct amdgpu_ring_funcs vce_v3_0_ring_phys_funcs = { .emit_frame_size = 4 + /* vce_v3_0_emit_pipeline_sync */ 6, /* amdgpu_vce_ring_emit_fence x1 no user fence */ - .emit_ib_size = 5, /* vce_v3_0_ring_emit_ib */ + .emit_ib_size = 4, /* amdgpu_vce_ring_emit_ib */ .emit_ib = amdgpu_vce_ring_emit_ib, .emit_fence = amdgpu_vce_ring_emit_fence, .test_ring = amdgpu_vce_ring_test_ring, @@ -924,7 +924,7 @@ static const struct amdgpu_ring_funcs vce_v3_0_ring_vm_funcs = { 6 + /* vce_v3_0_emit_vm_flush */ 4 + /* vce_v3_0_emit_pipeline_sync */ 6 + 6, /* amdgpu_vce_ring_emit_fence x2 vm fence */ - .emit_ib_size = 4, /* amdgpu_vce_ring_emit_ib */ + .emit_ib_size = 5, /* vce_v3_0_ring_emit_ib */ .emit_ib = vce_v3_0_ring_emit_ib, .emit_vm_flush = vce_v3_0_emit_vm_flush, .emit_pipeline_sync = vce_v3_0_emit_pipeline_sync, -- cgit v1.2.3 From c3d0280be8d5c6de9e3848e280493f561799bb67 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 28 Jun 2018 12:44:25 -0500 Subject: drm/amdgpu/pm: fix display count in non-DC path new_active_crtcs is a bitmask, new_active_crtc_count is the actual count. Reviewed-by: Rex Zhu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c index b455da487782..fc818b4d849c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c @@ -1882,7 +1882,7 @@ void amdgpu_pm_compute_clocks(struct amdgpu_device *adev) if (!amdgpu_device_has_dc_support(adev)) { mutex_lock(&adev->pm.mutex); amdgpu_dpm_get_active_displays(adev); - adev->pm.pm_display_cfg.num_display = adev->pm.dpm.new_active_crtcs; + adev->pm.pm_display_cfg.num_display = adev->pm.dpm.new_active_crtc_count; adev->pm.pm_display_cfg.vrefresh = amdgpu_dpm_get_vrefresh(adev); adev->pm.pm_display_cfg.min_vblank_time = amdgpu_dpm_get_vblank_time(adev); /* we have issues with mclk switching with refresh rates over 120 hz on the non-DC code. */ -- cgit v1.2.3 From d284f8248c72d0cb36a930920e60592eb455cd0d Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 28 Jun 2018 21:00:14 -0400 Subject: dm writecache: support optional offset for start of device Add an optional parameter "start_sector" to allow the start of the device to be offset by the specified number of 512-byte sectors. The sectors below this offset are not used by the writecache device and are left to be used for disk labels and/or userspace metadata (e.g. lvm). Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- Documentation/device-mapper/writecache.txt | 2 ++ drivers/md/dm-writecache.c | 43 ++++++++++++++++++++---------- 2 files changed, 31 insertions(+), 14 deletions(-) diff --git a/Documentation/device-mapper/writecache.txt b/Documentation/device-mapper/writecache.txt index 4424fa2c67d7..01532b3008ae 100644 --- a/Documentation/device-mapper/writecache.txt +++ b/Documentation/device-mapper/writecache.txt @@ -15,6 +15,8 @@ Constructor parameters: size) 5. the number of optional parameters (the parameters with an argument count as two) + start_sector n (default: 0) + offset from the start of cache device in 512-byte sectors high_watermark n (default: 50) start writeback when the number of used blocks reach this watermark diff --git a/drivers/md/dm-writecache.c b/drivers/md/dm-writecache.c index 07ea6a48aac6..87107c995cb5 100644 --- a/drivers/md/dm-writecache.c +++ b/drivers/md/dm-writecache.c @@ -136,6 +136,7 @@ struct dm_writecache { struct dm_target *ti; struct dm_dev *dev; struct dm_dev *ssd_dev; + sector_t start_sector; void *memory_map; uint64_t memory_map_size; size_t metadata_sectors; @@ -293,6 +294,10 @@ static int persistent_memory_claim(struct dm_writecache *wc) } dax_read_unlock(id); + + wc->memory_map += (size_t)wc->start_sector << SECTOR_SHIFT; + wc->memory_map_size -= (size_t)wc->start_sector << SECTOR_SHIFT; + return 0; err3: kvfree(pages); @@ -311,7 +316,7 @@ static int persistent_memory_claim(struct dm_writecache *wc) static void persistent_memory_release(struct dm_writecache *wc) { if (wc->memory_vmapped) - vunmap(wc->memory_map); + vunmap(wc->memory_map - ((size_t)wc->start_sector << SECTOR_SHIFT)); } static struct page *persistent_memory_page(void *addr) @@ -359,7 +364,7 @@ static void *memory_data(struct dm_writecache *wc, struct wc_entry *e) static sector_t cache_sector(struct dm_writecache *wc, struct wc_entry *e) { - return wc->metadata_sectors + + return wc->start_sector + wc->metadata_sectors + ((sector_t)e->index << (wc->block_size_bits - SECTOR_SHIFT)); } @@ -471,6 +476,7 @@ static void ssd_commit_flushed(struct dm_writecache *wc) if (unlikely(region.sector + region.count > wc->metadata_sectors)) region.count = wc->metadata_sectors - region.sector; + region.sector += wc->start_sector; atomic_inc(&endio.count); req.bi_op = REQ_OP_WRITE; req.bi_op_flags = REQ_SYNC; @@ -1946,14 +1952,6 @@ static int writecache_ctr(struct dm_target *ti, unsigned argc, char **argv) } wc->memory_map_size = i_size_read(wc->ssd_dev->bdev->bd_inode); - if (WC_MODE_PMEM(wc)) { - r = persistent_memory_claim(wc); - if (r) { - ti->error = "Unable to map persistent memory for cache"; - goto bad; - } - } - /* * Parse the cache block size */ @@ -1982,7 +1980,16 @@ static int writecache_ctr(struct dm_target *ti, unsigned argc, char **argv) while (opt_params) { string = dm_shift_arg(&as), opt_params--; - if (!strcasecmp(string, "high_watermark") && opt_params >= 1) { + if (!strcasecmp(string, "start_sector") && opt_params >= 1) { + unsigned long long start_sector; + string = dm_shift_arg(&as), opt_params--; + if (sscanf(string, "%llu%c", &start_sector, &dummy) != 1) + goto invalid_optional; + wc->start_sector = start_sector; + if (wc->start_sector != start_sector || + wc->start_sector >= wc->memory_map_size >> SECTOR_SHIFT) + goto invalid_optional; + } else if (!strcasecmp(string, "high_watermark") && opt_params >= 1) { string = dm_shift_arg(&as), opt_params--; if (sscanf(string, "%d%c", &high_wm_percent, &dummy) != 1) goto invalid_optional; @@ -2039,12 +2046,20 @@ invalid_optional: goto bad; } - if (!WC_MODE_PMEM(wc)) { + if (WC_MODE_PMEM(wc)) { + r = persistent_memory_claim(wc); + if (r) { + ti->error = "Unable to map persistent memory for cache"; + goto bad; + } + } else { struct dm_io_region region; struct dm_io_request req; size_t n_blocks, n_metadata_blocks; uint64_t n_bitmap_bits; + wc->memory_map_size -= (uint64_t)wc->start_sector << SECTOR_SHIFT; + bio_list_init(&wc->flush_list); wc->flush_thread = kthread_create(writecache_flush_thread, wc, "dm_writecache_flush"); if (IS_ERR(wc->flush_thread)) { @@ -2097,7 +2112,7 @@ invalid_optional: } region.bdev = wc->ssd_dev->bdev; - region.sector = 0; + region.sector = wc->start_sector; region.count = wc->metadata_sectors; req.bi_op = REQ_OP_READ; req.bi_op_flags = REQ_SYNC; @@ -2265,7 +2280,7 @@ static void writecache_status(struct dm_target *ti, status_type_t type, static struct target_type writecache_target = { .name = "writecache", - .version = {1, 0, 0}, + .version = {1, 1, 0}, .module = THIS_MODULE, .ctr = writecache_ctr, .dtr = writecache_dtr, -- cgit v1.2.3 From d55bac2754476624f23bdf3b908d117f3cdf469b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 22 Jun 2018 13:03:07 +0200 Subject: ata: Remove depends on HAS_DMA in case of platform dependency Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by: Geert Uytterhoeven Reviewed-by: Mark Brown Acked-by: Robin Murphy Signed-off-by: Tejun Heo --- drivers/ata/Kconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 2b16e7c8fff3..39b181d6bd0d 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -398,7 +398,6 @@ config SATA_DWC_VDEBUG config SATA_HIGHBANK tristate "Calxeda Highbank SATA support" - depends on HAS_DMA depends on ARCH_HIGHBANK || COMPILE_TEST help This option enables support for the Calxeda Highbank SoC's @@ -408,7 +407,6 @@ config SATA_HIGHBANK config SATA_MV tristate "Marvell SATA support" - depends on HAS_DMA depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST select GENERIC_PHY -- cgit v1.2.3 From 30998033f62a9915e0f884d680569a39bc9ce133 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Fri, 29 Jun 2018 17:17:57 +0100 Subject: ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, we use the ACPI processor ID only for the leaf/processor nodes as the specification states it must match the value of the ACPI processor ID field in the processor’s entry in the MADT. However, if a PPTT structure represents a processors group, it matches a processor container UID in the namespace and the ACPI_PPTT_ACPI_PROCESSOR_ID_VALID flag indicates whether the ACPI processor ID is valid. Let's use UID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set to be consistent instead of using table offset as it's currently done for non-leaf nodes. Fixes: 2bd00bcd73e5 (ACPI/PPTT: Add Processor Properties Topology Table parsing) Signed-off-by: Sudeep Holla Acked-by: Jeremy Linton [ rjw: Changelog (minor) ] Signed-off-by: Rafael J. Wysocki --- drivers/acpi/pptt.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c index e5ea1974d1e3..d1e26cb599bf 100644 --- a/drivers/acpi/pptt.c +++ b/drivers/acpi/pptt.c @@ -481,8 +481,14 @@ static int topology_get_acpi_cpu_tag(struct acpi_table_header *table, if (cpu_node) { cpu_node = acpi_find_processor_package_id(table, cpu_node, level, flag); - /* Only the first level has a guaranteed id */ - if (level == 0) + /* + * As per specification if the processor structure represents + * an actual processor, then ACPI processor ID must be valid. + * For processor containers ACPI_PPTT_ACPI_PROCESSOR_ID_VALID + * should be set if the UID is valid + */ + if (level == 0 || + cpu_node->flags & ACPI_PPTT_ACPI_PROCESSOR_ID_VALID) return cpu_node->acpi_processor_id; return ACPI_PTR_DIFF(cpu_node, table); } -- cgit v1.2.3 From a17712c8e4be4fa5404d20e9cd3b2b21eae7bc56 Mon Sep 17 00:00:00 2001 From: Jon Derrick Date: Mon, 2 Jul 2018 18:45:18 -0400 Subject: ext4: check superblock mapped prior to committing This patch attempts to close a hole leading to a BUG seen with hot removals during writes [1]. A block device (NVME namespace in this test case) is formatted to EXT4 without partitions. It's mounted and write I/O is run to a file, then the device is hot removed from the slot. The superblock attempts to be written to the drive which is no longer present. The typical chain of events leading to the BUG: ext4_commit_super() __sync_dirty_buffer() submit_bh() submit_bh_wbc() BUG_ON(!buffer_mapped(bh)); This fix checks for the superblock's buffer head being mapped prior to syncing. [1] https://www.spinics.net/lists/linux-ext4/msg56527.html Signed-off-by: Jon Derrick Signed-off-by: Theodore Ts'o Cc: stable@kernel.org --- fs/ext4/super.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index b37b00befd65..f36c9f774e83 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -4808,6 +4808,14 @@ static int ext4_commit_super(struct super_block *sb, int sync) if (!sbh || block_device_ejected(sb)) return error; + + /* + * The superblock bh should be mapped, but it might not be if the + * device was hot-removed. Not much we can do but fail the I/O. + */ + if (!buffer_mapped(sbh)) + return error; + /* * If the file system is mounted read-only, don't update the * superblock write time. This avoids updating the superblock -- cgit v1.2.3 From 20b52a75166086a40d838397ef3db28a4f2c5998 Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Fri, 29 Jun 2018 09:48:17 +0200 Subject: xsk: fix potential lost completion message in SKB path The code in xskq_produce_addr erroneously checked if there was up to LAZY_UPDATE_THRESHOLD amount of space in the completion queue. It only needs to check if there is one slot left in the queue. This bug could under some circumstances lead to a WARN_ON_ONCE being triggered and the completion message to user space being lost. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson Reported-by: Pavel Odintsov Signed-off-by: Alexei Starovoitov --- net/xdp/xsk_queue.h | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/net/xdp/xsk_queue.h b/net/xdp/xsk_queue.h index ef6a6f0ec949..52ecaf770642 100644 --- a/net/xdp/xsk_queue.h +++ b/net/xdp/xsk_queue.h @@ -62,14 +62,9 @@ static inline u32 xskq_nb_avail(struct xsk_queue *q, u32 dcnt) return (entries > dcnt) ? dcnt : entries; } -static inline u32 xskq_nb_free_lazy(struct xsk_queue *q, u32 producer) -{ - return q->nentries - (producer - q->cons_tail); -} - static inline u32 xskq_nb_free(struct xsk_queue *q, u32 producer, u32 dcnt) { - u32 free_entries = xskq_nb_free_lazy(q, producer); + u32 free_entries = q->nentries - (producer - q->cons_tail); if (free_entries >= dcnt) return free_entries; @@ -129,7 +124,7 @@ static inline int xskq_produce_addr(struct xsk_queue *q, u64 addr) { struct xdp_umem_ring *ring = (struct xdp_umem_ring *)q->ring; - if (xskq_nb_free(q, q->prod_tail, LAZY_UPDATE_THRESHOLD) == 0) + if (xskq_nb_free(q, q->prod_tail, 1) == 0) return -ENOSPC; ring->desc[q->prod_tail++ & q->ring_mask] = addr; -- cgit v1.2.3 From fe5886852601fb2593cbc5a7549ef9fd2ef481ba Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Fri, 29 Jun 2018 09:48:18 +0200 Subject: xsk: frame could be completed more than once in SKB path Fixed a bug in which a frame could be completed more than once when an error was returned from dev_direct_xmit(). The code erroneously retried sending the message leading to multiple calls to the SKB destructor and therefore multiple completions of the same buffer to user space. The error code in this case has been changed from EAGAIN to EBUSY in order to tell user space that the sending of the packet failed and the buffer has been return to user space through the completion queue. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson Reported-by: Pavel Odintsov Signed-off-by: Alexei Starovoitov --- net/xdp/xsk.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 59fb7d3c36a3..15aca73805fc 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -268,15 +268,15 @@ static int xsk_generic_xmit(struct sock *sk, struct msghdr *m, skb->destructor = xsk_destruct_skb; err = dev_direct_xmit(skb, xs->queue_id); + xskq_discard_desc(xs->tx); /* Ignore NET_XMIT_CN as packet might have been sent */ if (err == NET_XMIT_DROP || err == NETDEV_TX_BUSY) { - err = -EAGAIN; - /* SKB consumed by dev_direct_xmit() */ + /* SKB completed but not sent */ + err = -EBUSY; goto out; } sent_frame = true; - xskq_discard_desc(xs->tx); } out: -- cgit v1.2.3 From c03079c9d93d593d44524883b6b6127b21978e22 Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Fri, 29 Jun 2018 09:48:19 +0200 Subject: samples/bpf: deal with EBUSY return code from sendmsg in xdpsock sample Sendmsg in the SKB path of AF_XDP can now return EBUSY when a packet was discarded and completed by the driver. Just ignore this message in the sample application. Fixes: b4b8faa1ded7 ("samples/bpf: sample application and documentation for AF_XDP sockets") Signed-off-by: Magnus Karlsson Reported-by: Pavel Odintsov Signed-off-by: Alexei Starovoitov --- samples/bpf/xdpsock_user.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/samples/bpf/xdpsock_user.c b/samples/bpf/xdpsock_user.c index d69c8d78d3fd..5904b1543831 100644 --- a/samples/bpf/xdpsock_user.c +++ b/samples/bpf/xdpsock_user.c @@ -729,7 +729,7 @@ static void kick_tx(int fd) int ret; ret = sendto(fd, NULL, 0, MSG_DONTWAIT, NULL, 0); - if (ret >= 0 || errno == ENOBUFS || errno == EAGAIN) + if (ret >= 0 || errno == ENOBUFS || errno == EAGAIN || errno == EBUSY) return; lassert(0); } -- cgit v1.2.3 From a9744f7ca200c756e6f8c65b633770a2da711651 Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Fri, 29 Jun 2018 09:48:20 +0200 Subject: xsk: fix potential race in SKB TX completion code There is a potential race in the TX completion code for the SKB case. One process enters the sendmsg code of an AF_XDP socket in order to send a frame. The execution eventually trickles down to the driver that is told to send the packet. However, it decides to drop the packet due to some error condition (e.g., rings full) and frees the SKB. This will trigger the SKB destructor and a completion will be sent to the AF_XDP user space through its single-producer/single-consumer queues. At the same time a TX interrupt has fired on another core and it dispatches the TX completion code in the driver. It does its HW specific things and ends up freeing the SKB associated with the transmitted packet. This will trigger the SKB destructor and a completion will be sent to the AF_XDP user space through its single-producer/single-consumer queues. With a pseudo call stack, it would look like this: Core 1: sendmsg() being called in the application netdev_start_xmit() Driver entered through ndo_start_xmit Driver decides to free the SKB for some reason (e.g., rings full) Destructor of SKB called xskq_produce_addr() is called to signal completion to user space Core 2: TX completion irq NAPI loop Driver irq handler for TX completions Frees the SKB Destructor of SKB called xskq_produce_addr() is called to signal completion to user space We now have a violation of the single-producer/single-consumer principle for our queues as there are two threads trying to produce at the same time on the same queue. Fixed by introducing a spin_lock in the destructor. In regards to the performance, I get around 1.74 Mpps for txonly before and after the introduction of the spinlock. There is of course some impact due to the spin lock but it is in the less significant digits that are too noisy for me to measure. But let us say that the version without the spin lock got 1.745 Mpps in the best case and the version with 1.735 Mpps in the worst case, then that would mean a maximum drop in performance of 0.5%. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson Signed-off-by: Alexei Starovoitov --- include/net/xdp_sock.h | 4 ++++ net/xdp/xsk.c | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/include/net/xdp_sock.h b/include/net/xdp_sock.h index 9fe472f2ac95..7161856bcf9c 100644 --- a/include/net/xdp_sock.h +++ b/include/net/xdp_sock.h @@ -60,6 +60,10 @@ struct xdp_sock { bool zc; /* Protects multiple processes in the control path */ struct mutex mutex; + /* Mutual exclusion of NAPI TX thread and sendmsg error paths + * in the SKB destructor callback. + */ + spinlock_t tx_completion_lock; u64 rx_dropped; }; diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 15aca73805fc..7d220cbd09b6 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -199,8 +199,11 @@ static void xsk_destruct_skb(struct sk_buff *skb) { u64 addr = (u64)(long)skb_shinfo(skb)->destructor_arg; struct xdp_sock *xs = xdp_sk(skb->sk); + unsigned long flags; + spin_lock_irqsave(&xs->tx_completion_lock, flags); WARN_ON_ONCE(xskq_produce_addr(xs->umem->cq, addr)); + spin_unlock_irqrestore(&xs->tx_completion_lock, flags); sock_wfree(skb); } @@ -755,6 +758,7 @@ static int xsk_create(struct net *net, struct socket *sock, int protocol, xs = xdp_sk(sk); mutex_init(&xs->mutex); + spin_lock_init(&xs->tx_completion_lock); local_bh_disable(); sock_prot_inuse_add(net, &xsk_proto, 1); -- cgit v1.2.3 From f706abf188a82c9d961ed267a18ff5cb5e9aace9 Mon Sep 17 00:00:00 2001 From: Greentime Hu Date: Thu, 28 Jun 2018 18:03:25 +0800 Subject: nds32: To implement these icache invalidation APIs since nds32 cores don't snoop data cache. This issue is found by Guo Ren. Based on the Documentation/core-api/cachetlb.rst and it says: "Any necessary cache flushing or other coherency operations that need to occur should happen here. If the processor's instruction cache does not snoop cpu stores, it is very likely that you will need to flush the instruction cache for copy_to_user_page()." "If the icache does not snoop stores then this routine(flush_icache_range) will need to flush it." Signed-off-by: Guo Ren Signed-off-by: Greentime Hu --- arch/nds32/include/asm/cacheflush.h | 9 +++++-- arch/nds32/mm/cacheflush.c | 53 ++++++++++++++++++++++--------------- 2 files changed, 39 insertions(+), 23 deletions(-) diff --git a/arch/nds32/include/asm/cacheflush.h b/arch/nds32/include/asm/cacheflush.h index 10b48f0d8e85..8b26198d51bb 100644 --- a/arch/nds32/include/asm/cacheflush.h +++ b/arch/nds32/include/asm/cacheflush.h @@ -8,6 +8,8 @@ #define PG_dcache_dirty PG_arch_1 +void flush_icache_range(unsigned long start, unsigned long end); +void flush_icache_page(struct vm_area_struct *vma, struct page *page); #ifdef CONFIG_CPU_CACHE_ALIASING void flush_cache_mm(struct mm_struct *mm); void flush_cache_dup_mm(struct mm_struct *mm); @@ -34,13 +36,16 @@ void flush_anon_page(struct vm_area_struct *vma, void flush_kernel_dcache_page(struct page *page); void flush_kernel_vmap_range(void *addr, int size); void invalidate_kernel_vmap_range(void *addr, int size); -void flush_icache_range(unsigned long start, unsigned long end); -void flush_icache_page(struct vm_area_struct *vma, struct page *page); #define flush_dcache_mmap_lock(mapping) xa_lock_irq(&(mapping)->i_pages) #define flush_dcache_mmap_unlock(mapping) xa_unlock_irq(&(mapping)->i_pages) #else #include +#undef flush_icache_range +#undef flush_icache_page +#undef flush_icache_user_range +void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, + unsigned long addr, int len); #endif #endif /* __NDS32_CACHEFLUSH_H__ */ diff --git a/arch/nds32/mm/cacheflush.c b/arch/nds32/mm/cacheflush.c index ce8fd34497bf..7fcaa4e6be78 100644 --- a/arch/nds32/mm/cacheflush.c +++ b/arch/nds32/mm/cacheflush.c @@ -13,6 +13,38 @@ extern struct cache_info L1_cache_info[2]; +void flush_icache_range(unsigned long start, unsigned long end) +{ + unsigned long line_size, flags; + line_size = L1_cache_info[DCACHE].line_size; + start = start & ~(line_size - 1); + end = (end + line_size - 1) & ~(line_size - 1); + local_irq_save(flags); + cpu_cache_wbinval_range(start, end, 1); + local_irq_restore(flags); +} +EXPORT_SYMBOL(flush_icache_range); + +void flush_icache_page(struct vm_area_struct *vma, struct page *page) +{ + unsigned long flags; + unsigned long kaddr; + local_irq_save(flags); + kaddr = (unsigned long)kmap_atomic(page); + cpu_cache_wbinval_page(kaddr, vma->vm_flags & VM_EXEC); + kunmap_atomic((void *)kaddr); + local_irq_restore(flags); +} +EXPORT_SYMBOL(flush_icache_page); + +void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, + unsigned long addr, int len) +{ + unsigned long kaddr; + kaddr = (unsigned long)kmap_atomic(page) + (addr & ~PAGE_MASK); + flush_icache_range(kaddr, kaddr + len); + kunmap_atomic((void *)kaddr); +} #ifndef CONFIG_CPU_CACHE_ALIASING void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t * pte) @@ -318,27 +350,6 @@ void invalidate_kernel_vmap_range(void *addr, int size) } EXPORT_SYMBOL(invalidate_kernel_vmap_range); -void flush_icache_range(unsigned long start, unsigned long end) -{ - unsigned long line_size, flags; - line_size = L1_cache_info[DCACHE].line_size; - start = start & ~(line_size - 1); - end = (end + line_size - 1) & ~(line_size - 1); - local_irq_save(flags); - cpu_cache_wbinval_range(start, end, 1); - local_irq_restore(flags); -} -EXPORT_SYMBOL(flush_icache_range); - -void flush_icache_page(struct vm_area_struct *vma, struct page *page) -{ - unsigned long flags; - local_irq_save(flags); - cpu_cache_wbinval_page((unsigned long)page_address(page), - vma->vm_flags & VM_EXEC); - local_irq_restore(flags); -} - void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t * pte) { -- cgit v1.2.3 From 6897e6ecb3167598cb45e1a1424dd4d5e3778837 Mon Sep 17 00:00:00 2001 From: Greentime Hu Date: Thu, 28 Jun 2018 18:29:21 +0800 Subject: nds32: Fix the dts pointer is not passed correctly issue. We found that the original implementation will only use the built-in dtb pointer instead of the pointer pass from bootloader. This bug is fixed by this patch. Signed-off-by: Greentime Hu --- arch/nds32/kernel/setup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/nds32/kernel/setup.c b/arch/nds32/kernel/setup.c index 2f5b2ccebe47..63a1a5ef5219 100644 --- a/arch/nds32/kernel/setup.c +++ b/arch/nds32/kernel/setup.c @@ -278,7 +278,8 @@ static void __init setup_memory(void) void __init setup_arch(char **cmdline_p) { - early_init_devtree( __dtb_start); + early_init_devtree(__atags_pointer ? \ + phys_to_virt(__atags_pointer) : __dtb_start); setup_cpuinfo(); -- cgit v1.2.3 From 60feca8f59a0bbdee9545ab52775cad0171151ff Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Mon, 2 Jul 2018 09:27:47 +0800 Subject: mmc: core: cd_label must be last entry of mmc_gpio struct MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit bfd694d5e21c ("mmc: core: Add tunable delay before detecting card after card is inserted") adds "u32 cd_debounce_delay_ms" to the last of mmc_gpio struct and cause "char cd_label[0]" NOT work as string pointer of card detect label, when "cat /proc/interrupts", the devname for card detect gpio is incorrect as below: 144: 0 gpio-mxc 22 Edge ▒ 161: 0 gpio-mxc 7 Edge ▒ Move the cd_label field down to fix this, and drop the zero from the array size to prevent future similar bugs, the result is correct as below: 144: 0 gpio-mxc 22 Edge 2198000.mmc cd 161: 0 gpio-mxc 7 Edge 2190000.mmc cd Fixes: bfd694d5e21c ("mmc: core: Add tunable delay before detecting card after card is inserted") Signed-off-by: Anson Huang Tested-by: Fabio Estevam Signed-off-by: Ulf Hansson --- drivers/mmc/core/slot-gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c index ef05e0039378..2a833686784b 100644 --- a/drivers/mmc/core/slot-gpio.c +++ b/drivers/mmc/core/slot-gpio.c @@ -27,8 +27,8 @@ struct mmc_gpio { bool override_cd_active_level; irqreturn_t (*cd_gpio_isr)(int irq, void *dev_id); char *ro_label; - char cd_label[0]; u32 cd_debounce_delay_ms; + char cd_label[]; }; static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id) -- cgit v1.2.3 From bc9cb86e6514bed3d317208556d3cd48acff40e0 Mon Sep 17 00:00:00 2001 From: Greentime Hu Date: Tue, 3 Jul 2018 14:07:11 +0800 Subject: nds32: To simplify the implementation of update_mmu_cache() The checking code is done in kmap_atomic() so that we don't need to check it in update_mmu_cache() again. There is no need to implement it for cache aliasing or cache non-aliasing versions. We can just implement one version for both. Signed-off-by: Greentime Hu --- arch/nds32/mm/cacheflush.c | 47 ++++++++-------------------------------------- 1 file changed, 8 insertions(+), 39 deletions(-) diff --git a/arch/nds32/mm/cacheflush.c b/arch/nds32/mm/cacheflush.c index 7fcaa4e6be78..254703653b6f 100644 --- a/arch/nds32/mm/cacheflush.c +++ b/arch/nds32/mm/cacheflush.c @@ -45,7 +45,7 @@ void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, flush_icache_range(kaddr, kaddr + len); kunmap_atomic((void *)kaddr); } -#ifndef CONFIG_CPU_CACHE_ALIASING + void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t * pte) { @@ -67,19 +67,15 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, if ((test_and_clear_bit(PG_dcache_dirty, &page->flags)) || (vma->vm_flags & VM_EXEC)) { - - if (!PageHighMem(page)) { - cpu_cache_wbinval_page((unsigned long) - page_address(page), - vma->vm_flags & VM_EXEC); - } else { - unsigned long kaddr = (unsigned long)kmap_atomic(page); - cpu_cache_wbinval_page(kaddr, vma->vm_flags & VM_EXEC); - kunmap_atomic((void *)kaddr); - } + unsigned long kaddr; + local_irq_save(flags); + kaddr = (unsigned long)kmap_atomic(page); + cpu_cache_wbinval_page(kaddr, vma->vm_flags & VM_EXEC); + kunmap_atomic((void *)kaddr); + local_irq_restore(flags); } } -#else +#ifdef CONFIG_CPU_CACHE_ALIASING extern pte_t va_present(struct mm_struct *mm, unsigned long addr); static inline unsigned long aliasing(unsigned long addr, unsigned long page) @@ -349,31 +345,4 @@ void invalidate_kernel_vmap_range(void *addr, int size) local_irq_restore(flags); } EXPORT_SYMBOL(invalidate_kernel_vmap_range); - -void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, - pte_t * pte) -{ - struct page *page; - unsigned long flags; - unsigned long pfn = pte_pfn(*pte); - - if (!pfn_valid(pfn)) - return; - - if (vma->vm_mm == current->active_mm) { - local_irq_save(flags); - __nds32__mtsr_dsb(addr, NDS32_SR_TLB_VPN); - __nds32__tlbop_rwr(*pte); - __nds32__isb(); - local_irq_restore(flags); - } - - page = pfn_to_page(pfn); - if (test_and_clear_bit(PG_dcache_dirty, &page->flags) || - (vma->vm_flags & VM_EXEC)) { - local_irq_save(flags); - cpu_dcache_wbinval_page((unsigned long)page_address(page)); - local_irq_restore(flags); - } -} #endif -- cgit v1.2.3 From 5d1c115241e4aa0034ddf44693c6bd2e89e10831 Mon Sep 17 00:00:00 2001 From: Robert Nelson Date: Mon, 2 Jul 2018 15:21:43 -0500 Subject: ARM: dts: am335x-bone-common: Fix mmc0 Write Protect Mainline Commit b74c2b21e1551018af53ee6c1efc051dfce2d788 added the pinmux settings for mmc1, however this pin (0x9a0) is routed to P9_42 on the cape header. Thus any BeagleBone cape that utilizes P9_42 triggers mmc0's Write Protect. Fixes: b74c2b21e155 ("ARM: dts: am33xx: Add pinmux data for mmc1 in am335x-evm, evmsk and beaglebone") Signed-off-by: Robert Nelson CC: Faiz Abbas CC: Tony Lindgren CC: Jason Kridner CC: Drew Fustini Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-bone-common.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index f9e8667f5886..73b514dddf65 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -168,7 +168,6 @@ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */ >; }; -- cgit v1.2.3 From d9c0ffcabd6aae7ff1e34e8078354c13bb9f1183 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 28 Jun 2018 18:29:41 +0200 Subject: sched/nohz: Skip remote tick on idle task entirely Some people have reported that the warning in sched_tick_remote() occasionally triggers, especially in favour of some RCU-Torture pressure: WARNING: CPU: 11 PID: 906 at kernel/sched/core.c:3138 sched_tick_remote+0xb6/0xc0 Modules linked in: CPU: 11 PID: 906 Comm: kworker/u32:3 Not tainted 4.18.0-rc2+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Workqueue: events_unbound sched_tick_remote RIP: 0010:sched_tick_remote+0xb6/0xc0 Code: e8 0f 06 b8 00 c6 03 00 fb eb 9d 8b 43 04 85 c0 75 8d 48 8b 83 e0 0a 00 00 48 85 c0 75 81 eb 88 48 89 df e8 bc fe ff ff eb aa <0f> 0b eb +c5 66 0f 1f 44 00 00 bf 17 00 00 00 e8 b6 2e fe ff 0f b6 Call Trace: process_one_work+0x1df/0x3b0 worker_thread+0x44/0x3d0 kthread+0xf3/0x130 ? set_worker_desc+0xb0/0xb0 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x35/0x40 This happens when the remote tick applies on an idle task. Usually the idle_cpu() check avoids that, but it is performed before we lock the runqueue and it is therefore racy. It was intended to be that way in order to prevent from useless runqueue locks since idle task tick callback is a no-op. Now if the racy check slips out of our hands and we end up remotely ticking an idle task, the empty task_tick_idle() is harmless. Still it won't pass the WARN_ON_ONCE() test that ensures rq_clock_task() is not too far from curr->se.exec_start because update_curr_idle() doesn't update the exec_start value like other scheduler policies. Hence the reported false positive. So let's have another check, while the rq is locked, to make sure we don't remote tick on an idle task. The lockless idle_cpu() still applies to avoid unecessary rq lock contention. Reported-by: Jacek Tomaka Reported-by: Paul E. McKenney Reported-by: Anna-Maria Gleixner Signed-off-by: Frederic Weisbecker Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1530203381-31234-1-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 36 +++++++++++++++++++++--------------- 1 file changed, 21 insertions(+), 15 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 78d8facba456..22fce36426c0 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -3113,7 +3113,9 @@ static void sched_tick_remote(struct work_struct *work) struct tick_work *twork = container_of(dwork, struct tick_work, work); int cpu = twork->cpu; struct rq *rq = cpu_rq(cpu); + struct task_struct *curr; struct rq_flags rf; + u64 delta; /* * Handle the tick only if it appears the remote CPU is running in full @@ -3122,24 +3124,28 @@ static void sched_tick_remote(struct work_struct *work) * statistics and checks timeslices in a time-independent way, regardless * of when exactly it is running. */ - if (!idle_cpu(cpu) && tick_nohz_tick_stopped_cpu(cpu)) { - struct task_struct *curr; - u64 delta; + if (idle_cpu(cpu) || !tick_nohz_tick_stopped_cpu(cpu)) + goto out_requeue; - rq_lock_irq(rq, &rf); - update_rq_clock(rq); - curr = rq->curr; - delta = rq_clock_task(rq) - curr->se.exec_start; + rq_lock_irq(rq, &rf); + curr = rq->curr; + if (is_idle_task(curr)) + goto out_unlock; - /* - * Make sure the next tick runs within a reasonable - * amount of time. - */ - WARN_ON_ONCE(delta > (u64)NSEC_PER_SEC * 3); - curr->sched_class->task_tick(rq, curr, 0); - rq_unlock_irq(rq, &rf); - } + update_rq_clock(rq); + delta = rq_clock_task(rq) - curr->se.exec_start; + + /* + * Make sure the next tick runs within a reasonable + * amount of time. + */ + WARN_ON_ONCE(delta > (u64)NSEC_PER_SEC * 3); + curr->sched_class->task_tick(rq, curr, 0); + +out_unlock: + rq_unlock_irq(rq, &rf); +out_requeue: /* * Run the remote tick once per second (1Hz). This arbitrary * frequency is large enough to avoid overload but short enough -- cgit v1.2.3 From 296b2ffe7fa9ed756c41415c6b1512bc4ad687b1 Mon Sep 17 00:00:00 2001 From: Vincent Guittot Date: Tue, 26 Jun 2018 15:53:22 +0200 Subject: sched/rt: Fix call to cpufreq_update_util() With commit: 8f111bc357aa ("cpufreq/schedutil: Rewrite CPUFREQ_RT support") the schedutil governor uses rq->rt.rt_nr_running to detect whether an RT task is currently running on the CPU and to set frequency to max if necessary. cpufreq_update_util() is called in enqueue/dequeue_top_rt_rq() but rq->rt.rt_nr_running has not been updated yet when dequeue_top_rt_rq() is called so schedutil still considers that an RT task is running when the last task is dequeued. The update of rq->rt.rt_nr_running happens later in dequeue_rt_stack(). In fact, we can take advantage of the sequence that the dequeue then re-enqueue rt entities when a rt task is enqueued or dequeued; As a result enqueue_top_rt_rq() is always called when a task is enqueued or dequeued and also when groups are throttled or unthrottled. The only place that not use enqueue_top_rt_rq() is when root rt_rq is throttled. Signed-off-by: Vincent Guittot Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: efault@gmx.de Cc: juri.lelli@redhat.com Cc: patrick.bellasi@arm.com Cc: viresh.kumar@linaro.org Fixes: 8f111bc357aa ('cpufreq/schedutil: Rewrite CPUFREQ_RT support') Link: http://lkml.kernel.org/r/1530021202-21695-1-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar --- kernel/sched/cpufreq_schedutil.c | 2 +- kernel/sched/rt.c | 16 ++++++++++------ kernel/sched/sched.h | 5 +++++ 3 files changed, 16 insertions(+), 7 deletions(-) diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c index 3cde46483f0a..c907fde01eaa 100644 --- a/kernel/sched/cpufreq_schedutil.c +++ b/kernel/sched/cpufreq_schedutil.c @@ -192,7 +192,7 @@ static unsigned long sugov_aggregate_util(struct sugov_cpu *sg_cpu) { struct rq *rq = cpu_rq(sg_cpu->cpu); - if (rq->rt.rt_nr_running) + if (rt_rq_is_runnable(&rq->rt)) return sg_cpu->max; /* diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c index 47556b0c9a95..572567078b60 100644 --- a/kernel/sched/rt.c +++ b/kernel/sched/rt.c @@ -508,8 +508,11 @@ static void sched_rt_rq_dequeue(struct rt_rq *rt_rq) rt_se = rt_rq->tg->rt_se[cpu]; - if (!rt_se) + if (!rt_se) { dequeue_top_rt_rq(rt_rq); + /* Kick cpufreq (see the comment in kernel/sched/sched.h). */ + cpufreq_update_util(rq_of_rt_rq(rt_rq), 0); + } else if (on_rt_rq(rt_se)) dequeue_rt_entity(rt_se, 0); } @@ -1001,8 +1004,6 @@ dequeue_top_rt_rq(struct rt_rq *rt_rq) sub_nr_running(rq, rt_rq->rt_nr_running); rt_rq->rt_queued = 0; - /* Kick cpufreq (see the comment in kernel/sched/sched.h). */ - cpufreq_update_util(rq, 0); } static void @@ -1014,11 +1015,14 @@ enqueue_top_rt_rq(struct rt_rq *rt_rq) if (rt_rq->rt_queued) return; - if (rt_rq_throttled(rt_rq) || !rt_rq->rt_nr_running) + + if (rt_rq_throttled(rt_rq)) return; - add_nr_running(rq, rt_rq->rt_nr_running); - rt_rq->rt_queued = 1; + if (rt_rq->rt_nr_running) { + add_nr_running(rq, rt_rq->rt_nr_running); + rt_rq->rt_queued = 1; + } /* Kick cpufreq (see the comment in kernel/sched/sched.h). */ cpufreq_update_util(rq, 0); diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index 6601baf2361c..27ddec334601 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -609,6 +609,11 @@ struct rt_rq { #endif }; +static inline bool rt_rq_is_runnable(struct rt_rq *rt_rq) +{ + return rt_rq->rt_queued && rt_rq->rt_nr_running; +} + /* Deadline class' related fields in a runqueue */ struct dl_rq { /* runqueue is an rbtree, ordered by deadline */ -- cgit v1.2.3 From 512ac999d2755d2b7109e996a76b6fb8b888631d Mon Sep 17 00:00:00 2001 From: Xunlei Pang Date: Wed, 20 Jun 2018 18:18:33 +0800 Subject: sched/fair: Fix bandwidth timer clock drift condition I noticed that cgroup task groups constantly get throttled even if they have low CPU usage, this causes some jitters on the response time to some of our business containers when enabling CPU quotas. It's very simple to reproduce: mkdir /sys/fs/cgroup/cpu/test cd /sys/fs/cgroup/cpu/test echo 100000 > cpu.cfs_quota_us echo $$ > tasks then repeat: cat cpu.stat | grep nr_throttled # nr_throttled will increase steadily After some analysis, we found that cfs_rq::runtime_remaining will be cleared by expire_cfs_rq_runtime() due to two equal but stale "cfs_{b|q}->runtime_expires" after period timer is re-armed. The current condition to judge clock drift in expire_cfs_rq_runtime() is wrong, the two runtime_expires are actually the same when clock drift happens, so this condtion can never hit. The orginal design was correctly done by this commit: a9cf55b28610 ("sched: Expire invalid runtime") ... but was changed to be the current implementation due to its locking bug. This patch introduces another way, it adds a new field in both structures cfs_rq and cfs_bandwidth to record the expiration update sequence, and uses them to figure out if clock drift happens (true if they are equal). Signed-off-by: Xunlei Pang Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Ben Segall Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 51f2176d74ac ("sched/fair: Fix unlocked reads of some cfs_b->quota/period") Link: http://lkml.kernel.org/r/20180620101834.24455-1-xlpang@linux.alibaba.com Signed-off-by: Ingo Molnar --- kernel/sched/fair.c | 14 ++++++++------ kernel/sched/sched.h | 6 ++++-- 2 files changed, 12 insertions(+), 8 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 1866e64792a7..791707c56886 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -4590,6 +4590,7 @@ void __refill_cfs_bandwidth_runtime(struct cfs_bandwidth *cfs_b) now = sched_clock_cpu(smp_processor_id()); cfs_b->runtime = cfs_b->quota; cfs_b->runtime_expires = now + ktime_to_ns(cfs_b->period); + cfs_b->expires_seq++; } static inline struct cfs_bandwidth *tg_cfs_bandwidth(struct task_group *tg) @@ -4612,6 +4613,7 @@ static int assign_cfs_rq_runtime(struct cfs_rq *cfs_rq) struct task_group *tg = cfs_rq->tg; struct cfs_bandwidth *cfs_b = tg_cfs_bandwidth(tg); u64 amount = 0, min_amount, expires; + int expires_seq; /* note: this is a positive sum as runtime_remaining <= 0 */ min_amount = sched_cfs_bandwidth_slice() - cfs_rq->runtime_remaining; @@ -4628,6 +4630,7 @@ static int assign_cfs_rq_runtime(struct cfs_rq *cfs_rq) cfs_b->idle = 0; } } + expires_seq = cfs_b->expires_seq; expires = cfs_b->runtime_expires; raw_spin_unlock(&cfs_b->lock); @@ -4637,8 +4640,10 @@ static int assign_cfs_rq_runtime(struct cfs_rq *cfs_rq) * spread between our sched_clock and the one on which runtime was * issued. */ - if ((s64)(expires - cfs_rq->runtime_expires) > 0) + if (cfs_rq->expires_seq != expires_seq) { + cfs_rq->expires_seq = expires_seq; cfs_rq->runtime_expires = expires; + } return cfs_rq->runtime_remaining > 0; } @@ -4664,12 +4669,9 @@ static void expire_cfs_rq_runtime(struct cfs_rq *cfs_rq) * has not truly expired. * * Fortunately we can check determine whether this the case by checking - * whether the global deadline has advanced. It is valid to compare - * cfs_b->runtime_expires without any locks since we only care about - * exact equality, so a partial write will still work. + * whether the global deadline(cfs_b->expires_seq) has advanced. */ - - if (cfs_rq->runtime_expires != cfs_b->runtime_expires) { + if (cfs_rq->expires_seq == cfs_b->expires_seq) { /* extend local deadline, drift is bounded above by 2 ticks */ cfs_rq->runtime_expires += TICK_NSEC; } else { diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index 27ddec334601..c7742dcc136c 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -334,9 +334,10 @@ struct cfs_bandwidth { u64 runtime; s64 hierarchical_quota; u64 runtime_expires; + int expires_seq; - int idle; - int period_active; + short idle; + short period_active; struct hrtimer period_timer; struct hrtimer slack_timer; struct list_head throttled_cfs_rq; @@ -551,6 +552,7 @@ struct cfs_rq { #ifdef CONFIG_CFS_BANDWIDTH int runtime_enabled; + int expires_seq; u64 runtime_expires; s64 runtime_remaining; -- cgit v1.2.3 From f1d1be8aee6c461652aea8f58bedebaa73d7f4d3 Mon Sep 17 00:00:00 2001 From: Xunlei Pang Date: Wed, 20 Jun 2018 18:18:34 +0800 Subject: sched/fair: Advance global expiration when period timer is restarted When period gets restarted after some idle time, start_cfs_bandwidth() doesn't update the expiration information, expire_cfs_rq_runtime() will see cfs_rq->runtime_expires smaller than rq clock and go to the clock drift logic, wasting needless CPU cycles on the scheduler hot path. Update the global expiration in start_cfs_bandwidth() to avoid frequent expire_cfs_rq_runtime() calls once a new period begins. Signed-off-by: Xunlei Pang Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Ben Segall Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20180620101834.24455-2-xlpang@linux.alibaba.com Signed-off-by: Ingo Molnar --- kernel/sched/fair.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 791707c56886..840b92ee6f89 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -5204,13 +5204,18 @@ static void init_cfs_rq_runtime(struct cfs_rq *cfs_rq) void start_cfs_bandwidth(struct cfs_bandwidth *cfs_b) { + u64 overrun; + lockdep_assert_held(&cfs_b->lock); - if (!cfs_b->period_active) { - cfs_b->period_active = 1; - hrtimer_forward_now(&cfs_b->period_timer, cfs_b->period); - hrtimer_start_expires(&cfs_b->period_timer, HRTIMER_MODE_ABS_PINNED); - } + if (cfs_b->period_active) + return; + + cfs_b->period_active = 1; + overrun = hrtimer_forward_now(&cfs_b->period_timer, cfs_b->period); + cfs_b->runtime_expires += (overrun + 1) * ktime_to_ns(cfs_b->period); + cfs_b->expires_seq++; + hrtimer_start_expires(&cfs_b->period_timer, HRTIMER_MODE_ABS_PINNED); } static void destroy_cfs_bandwidth(struct cfs_bandwidth *cfs_b) -- cgit v1.2.3 From 3482d98bbc730758b63a5d1cf41d05ea17481412 Mon Sep 17 00:00:00 2001 From: Vincent Guittot Date: Thu, 14 Jun 2018 12:33:00 +0200 Subject: sched/util_est: Fix util_est_dequeue() for throttled cfs_rq When a cfs_rq is throttled, parent cfs_rq->nr_running is decreased and everything happens at cfs_rq level. Currently util_est stays unchanged in such case and it keeps accounting the utilization of throttled tasks. This can somewhat make sense as we don't dequeue tasks but only throttled cfs_rq. If a task of another group is enqueued/dequeued and root cfs_rq becomes idle during the dequeue, util_est will be cleared whereas it was accounting util_est of throttled tasks before. So the behavior of util_est is not always the same regarding throttled tasks and depends of side activity. Furthermore, util_est will not be updated when the cfs_rq is unthrottled as everything happens at cfs_rq level. Main results is that util_est will stay null whereas we now have running tasks. We have to wait for the next dequeue/enqueue of the previously throttled tasks to get an up to date util_est. Remove the assumption that cfs_rq's estimated utilization of a CPU is 0 if there is no running task so the util_est of a task remains until the latter is dequeued even if its cfs_rq has been throttled. Signed-off-by: Vincent Guittot Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Patrick Bellasi Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 7f65ea42eb00 ("sched/fair: Add util_est on top of PELT") Link: http://lkml.kernel.org/r/1528972380-16268-1-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar --- kernel/sched/fair.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 840b92ee6f89..2f0a0be4d344 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -3982,18 +3982,10 @@ util_est_dequeue(struct cfs_rq *cfs_rq, struct task_struct *p, bool task_sleep) if (!sched_feat(UTIL_EST)) return; - /* - * Update root cfs_rq's estimated utilization - * - * If *p is the last task then the root cfs_rq's estimated utilization - * of a CPU is 0 by definition. - */ - ue.enqueued = 0; - if (cfs_rq->nr_running) { - ue.enqueued = cfs_rq->avg.util_est.enqueued; - ue.enqueued -= min_t(unsigned int, ue.enqueued, - (_task_util_est(p) | UTIL_AVG_UNCHANGED)); - } + /* Update root cfs_rq's estimated utilization */ + ue.enqueued = cfs_rq->avg.util_est.enqueued; + ue.enqueued -= min_t(unsigned int, ue.enqueued, + (_task_util_est(p) | UTIL_AVG_UNCHANGED)); WRITE_ONCE(cfs_rq->avg.util_est.enqueued, ue.enqueued); /* -- cgit v1.2.3 From 1cef1150ef40ec52f507436a14230cbc2623299c Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 7 Jun 2018 11:45:49 +0200 Subject: kthread, sched/core: Fix kthread_parkme() (again...) Gaurav reports that commit: 85f1abe0019f ("kthread, sched/wait: Fix kthread_parkme() completion issue") isn't working for him. Because of the following race: > controller Thread CPUHP Thread > takedown_cpu > kthread_park > kthread_parkme > Set KTHREAD_SHOULD_PARK > smpboot_thread_fn > set Task interruptible > > > wake_up_process > if (!(p->state & state)) > goto out; > > Kthread_parkme > SET TASK_PARKED > schedule > raw_spin_lock(&rq->lock) > ttwu_remote > waiting for __task_rq_lock > context_switch > > finish_lock_switch > > > > Case TASK_PARKED > kthread_park_complete > > > SET Running Furthermore, Oleg noticed that the whole scheduler TASK_PARKED handling is buggered because the TASK_DEAD thing is done with preemption disabled, the current code can still complete early on preemption :/ So basically revert that earlier fix and go with a variant of the alternative mentioned in the commit. Promote TASK_PARKED to special state to avoid the store-store issue on task->state leading to the WARN in kthread_unpark() -> __kthread_bind(). But in addition, add wait_task_inactive() to kthread_park() to ensure the task really is PARKED when we return from kthread_park(). This avoids the whole kthread still gets migrated nonsense -- although it would be really good to get this done differently. Reported-by: Gaurav Kohli Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 85f1abe0019f ("kthread, sched/wait: Fix kthread_parkme() completion issue") Signed-off-by: Ingo Molnar --- include/linux/kthread.h | 1 - include/linux/sched.h | 2 +- kernel/kthread.c | 30 ++++++++++++++++++++++++------ kernel/sched/core.c | 31 +++++++++++-------------------- 4 files changed, 36 insertions(+), 28 deletions(-) diff --git a/include/linux/kthread.h b/include/linux/kthread.h index 2803264c512f..c1961761311d 100644 --- a/include/linux/kthread.h +++ b/include/linux/kthread.h @@ -62,7 +62,6 @@ void *kthread_probe_data(struct task_struct *k); int kthread_park(struct task_struct *k); void kthread_unpark(struct task_struct *k); void kthread_parkme(void); -void kthread_park_complete(struct task_struct *k); int kthreadd(void *unused); extern struct task_struct *kthreadd_task; diff --git a/include/linux/sched.h b/include/linux/sched.h index 9256118bd40c..43731fe51c97 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -118,7 +118,7 @@ struct task_group; * the comment with set_special_state(). */ #define is_special_task_state(state) \ - ((state) & (__TASK_STOPPED | __TASK_TRACED | TASK_DEAD)) + ((state) & (__TASK_STOPPED | __TASK_TRACED | TASK_PARKED | TASK_DEAD)) #define __set_current_state(state_value) \ do { \ diff --git a/kernel/kthread.c b/kernel/kthread.c index 481951bf091d..750cb8082694 100644 --- a/kernel/kthread.c +++ b/kernel/kthread.c @@ -177,9 +177,20 @@ void *kthread_probe_data(struct task_struct *task) static void __kthread_parkme(struct kthread *self) { for (;;) { - set_current_state(TASK_PARKED); + /* + * TASK_PARKED is a special state; we must serialize against + * possible pending wakeups to avoid store-store collisions on + * task->state. + * + * Such a collision might possibly result in the task state + * changin from TASK_PARKED and us failing the + * wait_task_inactive() in kthread_park(). + */ + set_special_state(TASK_PARKED); if (!test_bit(KTHREAD_SHOULD_PARK, &self->flags)) break; + + complete_all(&self->parked); schedule(); } __set_current_state(TASK_RUNNING); @@ -191,11 +202,6 @@ void kthread_parkme(void) } EXPORT_SYMBOL_GPL(kthread_parkme); -void kthread_park_complete(struct task_struct *k) -{ - complete_all(&to_kthread(k)->parked); -} - static int kthread(void *_create) { /* Copy data: it's on kthread's stack */ @@ -461,6 +467,9 @@ void kthread_unpark(struct task_struct *k) reinit_completion(&kthread->parked); clear_bit(KTHREAD_SHOULD_PARK, &kthread->flags); + /* + * __kthread_parkme() will either see !SHOULD_PARK or get the wakeup. + */ wake_up_state(k, TASK_PARKED); } EXPORT_SYMBOL_GPL(kthread_unpark); @@ -487,7 +496,16 @@ int kthread_park(struct task_struct *k) set_bit(KTHREAD_SHOULD_PARK, &kthread->flags); if (k != current) { wake_up_process(k); + /* + * Wait for __kthread_parkme() to complete(), this means we + * _will_ have TASK_PARKED and are about to call schedule(). + */ wait_for_completion(&kthread->parked); + /* + * Now wait for that schedule() to complete and the task to + * get scheduled out. + */ + WARN_ON_ONCE(!wait_task_inactive(k, TASK_PARKED)); } return 0; diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 22fce36426c0..fe365c9a08e9 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -7,7 +7,6 @@ */ #include "sched.h" -#include #include #include @@ -2724,28 +2723,20 @@ static struct rq *finish_task_switch(struct task_struct *prev) membarrier_mm_sync_core_before_usermode(mm); mmdrop(mm); } - if (unlikely(prev_state & (TASK_DEAD|TASK_PARKED))) { - switch (prev_state) { - case TASK_DEAD: - if (prev->sched_class->task_dead) - prev->sched_class->task_dead(prev); + if (unlikely(prev_state == TASK_DEAD)) { + if (prev->sched_class->task_dead) + prev->sched_class->task_dead(prev); - /* - * Remove function-return probe instances associated with this - * task and put them back on the free list. - */ - kprobe_flush_task(prev); - - /* Task is done with its stack. */ - put_task_stack(prev); + /* + * Remove function-return probe instances associated with this + * task and put them back on the free list. + */ + kprobe_flush_task(prev); - put_task_struct(prev); - break; + /* Task is done with its stack. */ + put_task_stack(prev); - case TASK_PARKED: - kthread_park_complete(prev); - break; - } + put_task_struct(prev); } tick_nohz_task_switch(); -- cgit v1.2.3 From 4fb5f58e8d191f7c81637ad81284e4848afb4244 Mon Sep 17 00:00:00 2001 From: Zhenzhong Duan Date: Mon, 2 Jul 2018 23:49:54 -0700 Subject: x86/mm/32: Initialize the CR4 shadow before __flush_tlb_all() On 32-bit kernels, __flush_tlb_all() may have read the CR4 shadow before the initialization of CR4 shadow in cpu_init(). Fix it by adding an explicit cr4_init_shadow() call into start_secondary() which is the first function called on non-boot SMP CPUs - ahead of the __flush_tlb_all() call. ( This is somewhat of a layering violation, but start_secondary() does CR4 bootstrap in the PCID case anyway. ) Signed-off-by: Zhenzhong Duan Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: "H. Peter Anvin" Link: http://lkml.kernel.org/r/b07b6ae9-4b57-4b40-b9bc-50c2c67f1d91@default Signed-off-by: Ingo Molnar --- arch/x86/kernel/smpboot.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index c2f7d1d2a5c3..db9656e13ea0 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -221,6 +221,11 @@ static void notrace start_secondary(void *unused) #ifdef CONFIG_X86_32 /* switch away from the initial page table */ load_cr3(swapper_pg_dir); + /* + * Initialize the CR4 shadow before doing anything that could + * try to read it. + */ + cr4_init_shadow(); __flush_tlb_all(); #endif load_current_idt(); -- cgit v1.2.3 From 0144eb204cdcdf09a76794b4a294291388e739bc Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Mon, 25 Jun 2018 07:41:33 -0500 Subject: ARM: dts: omap3: Fix am3517 mdio and emac clock references A previous patch removed OMAP clock aliases that were perceived to be unnecessary. Unfortunately, it broke the ethernet on the am3517-evm. This patch enables the MDIO clock and EMAC clock. Fixes: 0ed266d7ae5e ("clk: ti: omap3: cleanup unnecessary clock aliases") Cc: stable@vger.kernel.org #4.16+ Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am3517.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index ca294914bbb1..4b6062b631b1 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -39,6 +39,8 @@ ti,davinci-ctrl-ram-size = <0x2000>; ti,davinci-rmii-en = /bits/ 8 <1>; local-mac-address = [ 00 00 00 00 00 00 ]; + clocks = <&emac_ick>; + clock-names = "ick"; }; davinci_mdio: ethernet@5c030000 { @@ -49,6 +51,8 @@ bus_freq = <1000000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&emac_fck>; + clock-names = "fck"; }; uart4: serial@4809e000 { -- cgit v1.2.3 From 845d382bb15c6e7dc5026c0ff919c5b13fc7e11b Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Mon, 2 Jul 2018 16:35:53 -0500 Subject: x86/bugs: Update when to check for the LS_CFG SSBD mitigation If either the X86_FEATURE_AMD_SSBD or X86_FEATURE_VIRT_SSBD features are present, then there is no need to perform the check for the LS_CFG SSBD mitigation support. Signed-off-by: Tom Lendacky Cc: Borislav Petkov Cc: David Woodhouse Cc: Konrad Rzeszutek Wilk Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20180702213553.29202.21089.stgit@tlendack-t1.amdoffice.net Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/amd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 082d7875cef8..38915fbfae73 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -543,7 +543,9 @@ static void bsp_init_amd(struct cpuinfo_x86 *c) nodes_per_socket = ((value >> 3) & 7) + 1; } - if (c->x86 >= 0x15 && c->x86 <= 0x17) { + if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) && + !boot_cpu_has(X86_FEATURE_VIRT_SSBD) && + c->x86 >= 0x15 && c->x86 <= 0x17) { unsigned int bit; switch (c->x86) { -- cgit v1.2.3 From 612bc3b3d4be749f73a513a17d9b3ee1330d3487 Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Mon, 2 Jul 2018 16:36:02 -0500 Subject: x86/bugs: Fix the AMD SSBD usage of the SPEC_CTRL MSR On AMD, the presence of the MSR_SPEC_CTRL feature does not imply that the SSBD mitigation support should use the SPEC_CTRL MSR. Other features could have caused the MSR_SPEC_CTRL feature to be set, while a different SSBD mitigation option is in place. Update the SSBD support to check for the actual SSBD features that will use the SPEC_CTRL MSR. Signed-off-by: Tom Lendacky Cc: Borislav Petkov Cc: David Woodhouse Cc: Konrad Rzeszutek Wilk Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 6ac2f49edb1e ("x86/bugs: Add AMD's SPEC_CTRL MSR usage") Link: http://lkml.kernel.org/r/20180702213602.29202.33151.stgit@tlendack-t1.amdoffice.net Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/bugs.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 404df26b7de8..5c0ea39311fe 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -155,7 +155,8 @@ x86_virt_spec_ctrl(u64 guest_spec_ctrl, u64 guest_virt_spec_ctrl, bool setguest) guestval |= guest_spec_ctrl & x86_spec_ctrl_mask; /* SSBD controlled in MSR_SPEC_CTRL */ - if (static_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD)) + if (static_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD) || + static_cpu_has(X86_FEATURE_AMD_SSBD)) hostval |= ssbd_tif_to_spec_ctrl(ti->flags); if (hostval != guestval) { @@ -533,9 +534,10 @@ static enum ssb_mitigation __init __ssb_select_mitigation(void) * Intel uses the SPEC CTRL MSR Bit(2) for this, while AMD may * use a completely different MSR and bit dependent on family. */ - if (!static_cpu_has(X86_FEATURE_MSR_SPEC_CTRL)) + if (!static_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD) && + !static_cpu_has(X86_FEATURE_AMD_SSBD)) { x86_amd_ssb_disable(); - else { + } else { x86_spec_ctrl_base |= SPEC_CTRL_SSBD; x86_spec_ctrl_mask |= SPEC_CTRL_SSBD; wrmsrl(MSR_IA32_SPEC_CTRL, x86_spec_ctrl_base); -- cgit v1.2.3 From aa7eee8a143a7e8b530eb1e75fb86cae793d1e21 Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Sat, 30 Jun 2018 16:24:21 +0530 Subject: mtd: spi-nor: cadence-quadspi: Fix direct mode write timeouts Sometimes when writing large size files to flash in direct/memory mapped mode, it is seen that flash write enable command times out with error: [ 503.146293] cadence-qspi 47040000.ospi: Flash command execution timed out. This is because, we need to make sure previous direct write operation is complete by polling for IDLE bit in CONFIG_REG before starting the next operation. Fix this by polling for IDLE bit after memory mapped write. Fixes: a27f2eaf2b27 ("mtd: spi-nor: cadence-quadspi: Add support for direct access mode") Cc: stable@vger.kernel.org Signed-off-by: Vignesh R Reviewed-by: Marek Vasut Signed-off-by: Boris Brezillon --- drivers/mtd/spi-nor/cadence-quadspi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index c3f7aaa5d18f..d7e10b36a0b9 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -926,10 +926,12 @@ static ssize_t cqspi_write(struct spi_nor *nor, loff_t to, if (ret) return ret; - if (f_pdata->use_direct_mode) + if (f_pdata->use_direct_mode) { memcpy_toio(cqspi->ahb_base + to, buf, len); - else + ret = cqspi_wait_idle(cqspi); + } else { ret = cqspi_indirect_write_execute(nor, to, buf, len); + } if (ret) return ret; -- cgit v1.2.3 From d03db2bc26f0e4a6849ad649a09c9c73fccdc656 Mon Sep 17 00:00:00 2001 From: Nick Desaulniers Date: Thu, 21 Jun 2018 09:23:22 -0700 Subject: compiler-gcc.h: Add __attribute__((gnu_inline)) to all inline declarations Functions marked extern inline do not emit an externally visible function when the gnu89 C standard is used. Some KBUILD Makefiles overwrite KBUILD_CFLAGS. This is an issue for GCC 5.1+ users as without an explicit C standard specified, the default is gnu11. Since c99, the semantics of extern inline have changed such that an externally visible function is always emitted. This can lead to multiple definition errors of extern inline functions at link time of compilation units whose build files have removed an explicit C standard compiler flag for users of GCC 5.1+ or Clang. Suggested-by: Arnd Bergmann Suggested-by: H. Peter Anvin Suggested-by: Joe Perches Signed-off-by: Nick Desaulniers Acked-by: Juergen Gross Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: acme@redhat.com Cc: akataria@vmware.com Cc: akpm@linux-foundation.org Cc: andrea.parri@amarulasolutions.com Cc: ard.biesheuvel@linaro.org Cc: aryabinin@virtuozzo.com Cc: astrachan@google.com Cc: boris.ostrovsky@oracle.com Cc: brijesh.singh@amd.com Cc: caoj.fnst@cn.fujitsu.com Cc: geert@linux-m68k.org Cc: ghackmann@google.com Cc: gregkh@linuxfoundation.org Cc: jan.kiszka@siemens.com Cc: jarkko.sakkinen@linux.intel.com Cc: jpoimboe@redhat.com Cc: keescook@google.com Cc: kirill.shutemov@linux.intel.com Cc: kstewart@linuxfoundation.org Cc: linux-efi@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Cc: manojgupta@google.com Cc: mawilcox@microsoft.com Cc: michal.lkml@markovi.net Cc: mjg59@google.com Cc: mka@chromium.org Cc: pombredanne@nexb.com Cc: rientjes@google.com Cc: rostedt@goodmis.org Cc: sedat.dilek@gmail.com Cc: thomas.lendacky@amd.com Cc: tstellar@redhat.com Cc: tweek@google.com Cc: virtualization@lists.linux-foundation.org Cc: will.deacon@arm.com Cc: yamada.masahiro@socionext.com Link: http://lkml.kernel.org/r/20180621162324.36656-2-ndesaulniers@google.com Signed-off-by: Ingo Molnar --- include/linux/compiler-gcc.h | 29 ++++++++++++++++++++++------- 1 file changed, 22 insertions(+), 7 deletions(-) diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index fd282c7d3e5e..573f5a7d42d4 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -65,6 +65,18 @@ #define __must_be_array(a) BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0])) #endif +/* + * Feature detection for gnu_inline (gnu89 extern inline semantics). Either + * __GNUC_STDC_INLINE__ is defined (not using gnu89 extern inline semantics, + * and we opt in to the gnu89 semantics), or __GNUC_STDC_INLINE__ is not + * defined so the gnu89 semantics are the default. + */ +#ifdef __GNUC_STDC_INLINE__ +# define __gnu_inline __attribute__((gnu_inline)) +#else +# define __gnu_inline +#endif + /* * Force always-inline if the user requests it so via the .config, * or if gcc is too old. @@ -72,19 +84,22 @@ * -Wunused-function. This turns out to avoid the need for complex #ifdef * directives. Suppress the warning in clang as well by using "unused" * function attribute, which is redundant but not harmful for gcc. + * Prefer gnu_inline, so that extern inline functions do not emit an + * externally visible function. This makes extern inline behave as per gnu89 + * semantics rather than c99. This prevents multiple symbol definition errors + * of extern inline functions at link time. + * A lot of inline functions can cause havoc with function tracing. */ #if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \ !defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4) -#define inline inline __attribute__((always_inline,unused)) notrace -#define __inline__ __inline__ __attribute__((always_inline,unused)) notrace -#define __inline __inline __attribute__((always_inline,unused)) notrace +#define inline \ + inline __attribute__((always_inline, unused)) notrace __gnu_inline #else -/* A lot of inline functions can cause havoc with function tracing */ -#define inline inline __attribute__((unused)) notrace -#define __inline__ __inline__ __attribute__((unused)) notrace -#define __inline __inline __attribute__((unused)) notrace +#define inline inline __attribute__((unused)) notrace __gnu_inline #endif +#define __inline__ inline +#define __inline inline #define __always_inline inline __attribute__((always_inline)) #define noinline __attribute__((noinline)) -- cgit v1.2.3 From 0e2e160033283e20f688d8bad5b89460cc5bfcc4 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Thu, 21 Jun 2018 09:23:23 -0700 Subject: x86/asm: Add _ASM_ARG* constants for argument registers to i386 and x86-64 uses different registers for arguments; make them available so we don't have to #ifdef in the actual code. Native size and specified size (q, l, w, b) versions are provided. Signed-off-by: H. Peter Anvin Signed-off-by: Nick Desaulniers Reviewed-by: Sedat Dilek Acked-by: Juergen Gross Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: acme@redhat.com Cc: akataria@vmware.com Cc: akpm@linux-foundation.org Cc: andrea.parri@amarulasolutions.com Cc: ard.biesheuvel@linaro.org Cc: arnd@arndb.de Cc: aryabinin@virtuozzo.com Cc: astrachan@google.com Cc: boris.ostrovsky@oracle.com Cc: brijesh.singh@amd.com Cc: caoj.fnst@cn.fujitsu.com Cc: geert@linux-m68k.org Cc: ghackmann@google.com Cc: gregkh@linuxfoundation.org Cc: jan.kiszka@siemens.com Cc: jarkko.sakkinen@linux.intel.com Cc: joe@perches.com Cc: jpoimboe@redhat.com Cc: keescook@google.com Cc: kirill.shutemov@linux.intel.com Cc: kstewart@linuxfoundation.org Cc: linux-efi@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Cc: manojgupta@google.com Cc: mawilcox@microsoft.com Cc: michal.lkml@markovi.net Cc: mjg59@google.com Cc: mka@chromium.org Cc: pombredanne@nexb.com Cc: rientjes@google.com Cc: rostedt@goodmis.org Cc: thomas.lendacky@amd.com Cc: tstellar@redhat.com Cc: tweek@google.com Cc: virtualization@lists.linux-foundation.org Cc: will.deacon@arm.com Cc: yamada.masahiro@socionext.com Link: http://lkml.kernel.org/r/20180621162324.36656-3-ndesaulniers@google.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/asm.h | 59 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/arch/x86/include/asm/asm.h b/arch/x86/include/asm/asm.h index 219faaec51df..990770f9e76b 100644 --- a/arch/x86/include/asm/asm.h +++ b/arch/x86/include/asm/asm.h @@ -46,6 +46,65 @@ #define _ASM_SI __ASM_REG(si) #define _ASM_DI __ASM_REG(di) +#ifndef __x86_64__ +/* 32 bit */ + +#define _ASM_ARG1 _ASM_AX +#define _ASM_ARG2 _ASM_DX +#define _ASM_ARG3 _ASM_CX + +#define _ASM_ARG1L eax +#define _ASM_ARG2L edx +#define _ASM_ARG3L ecx + +#define _ASM_ARG1W ax +#define _ASM_ARG2W dx +#define _ASM_ARG3W cx + +#define _ASM_ARG1B al +#define _ASM_ARG2B dl +#define _ASM_ARG3B cl + +#else +/* 64 bit */ + +#define _ASM_ARG1 _ASM_DI +#define _ASM_ARG2 _ASM_SI +#define _ASM_ARG3 _ASM_DX +#define _ASM_ARG4 _ASM_CX +#define _ASM_ARG5 r8 +#define _ASM_ARG6 r9 + +#define _ASM_ARG1Q rdi +#define _ASM_ARG2Q rsi +#define _ASM_ARG3Q rdx +#define _ASM_ARG4Q rcx +#define _ASM_ARG5Q r8 +#define _ASM_ARG6Q r9 + +#define _ASM_ARG1L edi +#define _ASM_ARG2L esi +#define _ASM_ARG3L edx +#define _ASM_ARG4L ecx +#define _ASM_ARG5L r8d +#define _ASM_ARG6L r9d + +#define _ASM_ARG1W di +#define _ASM_ARG2W si +#define _ASM_ARG3W dx +#define _ASM_ARG4W cx +#define _ASM_ARG5W r8w +#define _ASM_ARG6W r9w + +#define _ASM_ARG1B dil +#define _ASM_ARG2B sil +#define _ASM_ARG3B dl +#define _ASM_ARG4B cl +#define _ASM_ARG5B r8b +#define _ASM_ARG6B r9b + +#endif + /* * Macros to generate condition code outputs from inline assembly, * The output operand must be type "bool". -- cgit v1.2.3 From d0a8d9378d16eb3c69bd8e6d23779fbdbee3a8c7 Mon Sep 17 00:00:00 2001 From: Nick Desaulniers Date: Thu, 21 Jun 2018 09:23:24 -0700 Subject: x86/paravirt: Make native_save_fl() extern inline native_save_fl() is marked static inline, but by using it as a function pointer in arch/x86/kernel/paravirt.c, it MUST be outlined. paravirt's use of native_save_fl() also requires that no GPRs other than %rax are clobbered. Compilers have different heuristics which they use to emit stack guard code, the emittance of which can break paravirt's callee saved assumption by clobbering %rcx. Marking a function definition extern inline means that if this version cannot be inlined, then the out-of-line version will be preferred. By having the out-of-line version be implemented in assembly, it cannot be instrumented with a stack protector, which might violate custom calling conventions that code like paravirt rely on. The semantics of extern inline has changed since gnu89. This means that folks using GCC versions >= 5.1 may see symbol redefinition errors at link time for subdirs that override KBUILD_CFLAGS (making the C standard used implicit) regardless of this patch. This has been cleaned up earlier in the patch set, but is left as a note in the commit message for future travelers. Reports: https://lkml.org/lkml/2018/5/7/534 https://github.com/ClangBuiltLinux/linux/issues/16 Discussion: https://bugs.llvm.org/show_bug.cgi?id=37512 https://lkml.org/lkml/2018/5/24/1371 Thanks to the many folks that participated in the discussion. Debugged-by: Alistair Strachan Debugged-by: Matthias Kaehlcke Suggested-by: Arnd Bergmann Suggested-by: H. Peter Anvin Suggested-by: Tom Stellar Reported-by: Sedat Dilek Tested-by: Sedat Dilek Signed-off-by: Nick Desaulniers Acked-by: Juergen Gross Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: acme@redhat.com Cc: akataria@vmware.com Cc: akpm@linux-foundation.org Cc: andrea.parri@amarulasolutions.com Cc: ard.biesheuvel@linaro.org Cc: aryabinin@virtuozzo.com Cc: astrachan@google.com Cc: boris.ostrovsky@oracle.com Cc: brijesh.singh@amd.com Cc: caoj.fnst@cn.fujitsu.com Cc: geert@linux-m68k.org Cc: ghackmann@google.com Cc: gregkh@linuxfoundation.org Cc: jan.kiszka@siemens.com Cc: jarkko.sakkinen@linux.intel.com Cc: joe@perches.com Cc: jpoimboe@redhat.com Cc: keescook@google.com Cc: kirill.shutemov@linux.intel.com Cc: kstewart@linuxfoundation.org Cc: linux-efi@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Cc: manojgupta@google.com Cc: mawilcox@microsoft.com Cc: michal.lkml@markovi.net Cc: mjg59@google.com Cc: mka@chromium.org Cc: pombredanne@nexb.com Cc: rientjes@google.com Cc: rostedt@goodmis.org Cc: thomas.lendacky@amd.com Cc: tweek@google.com Cc: virtualization@lists.linux-foundation.org Cc: will.deacon@arm.com Cc: yamada.masahiro@socionext.com Link: http://lkml.kernel.org/r/20180621162324.36656-4-ndesaulniers@google.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/irqflags.h | 2 +- arch/x86/kernel/Makefile | 1 + arch/x86/kernel/irqflags.S | 26 ++++++++++++++++++++++++++ 3 files changed, 28 insertions(+), 1 deletion(-) create mode 100644 arch/x86/kernel/irqflags.S diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h index 89f08955fff7..c4fc17220df9 100644 --- a/arch/x86/include/asm/irqflags.h +++ b/arch/x86/include/asm/irqflags.h @@ -13,7 +13,7 @@ * Interrupt control: */ -static inline unsigned long native_save_fl(void) +extern inline unsigned long native_save_fl(void) { unsigned long flags; diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 02d6f5cf4e70..8824d01c0c35 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -61,6 +61,7 @@ obj-y += alternative.o i8253.o hw_breakpoint.o obj-y += tsc.o tsc_msr.o io_delay.o rtc.o obj-y += pci-iommu_table.o obj-y += resource.o +obj-y += irqflags.o obj-y += process.o obj-y += fpu/ diff --git a/arch/x86/kernel/irqflags.S b/arch/x86/kernel/irqflags.S new file mode 100644 index 000000000000..ddeeaac8adda --- /dev/null +++ b/arch/x86/kernel/irqflags.S @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#include +#include +#include + +/* + * unsigned long native_save_fl(void) + */ +ENTRY(native_save_fl) + pushf + pop %_ASM_AX + ret +ENDPROC(native_save_fl) +EXPORT_SYMBOL(native_save_fl) + +/* + * void native_restore_fl(unsigned long flags) + * %eax/%rdi: flags + */ +ENTRY(native_restore_fl) + push %_ASM_ARG1 + popf + ret +ENDPROC(native_restore_fl) +EXPORT_SYMBOL(native_restore_fl) -- cgit v1.2.3 From 7a6b9f4d601dfce8cb68f0dcfd834270280e31e6 Mon Sep 17 00:00:00 2001 From: x00270170 Date: Tue, 3 Jul 2018 15:06:27 +0800 Subject: mmc: dw_mmc: fix card threshold control configuration Card write threshold control is supposed to be set since controller version 2.80a for data write in HS400 mode and data read in HS200/HS400/SDR104 mode. However the current code returns without configuring it in the case of data writing in HS400 mode. Meanwhile the patch fixes that the current code goes to 'disable' when doing data reading in HS400 mode. Fixes: 7e4bf1bc9543 ("mmc: dw_mmc: add the card write threshold for HS400 mode") Signed-off-by: Qing Xia Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Ulf Hansson --- drivers/mmc/host/dw_mmc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 623f4d27fa01..80dc2fd6576c 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1065,8 +1065,8 @@ static void dw_mci_ctrl_thld(struct dw_mci *host, struct mmc_data *data) * It's used when HS400 mode is enabled. */ if (data->flags & MMC_DATA_WRITE && - !(host->timing != MMC_TIMING_MMC_HS400)) - return; + host->timing != MMC_TIMING_MMC_HS400) + goto disable; if (data->flags & MMC_DATA_WRITE) enable = SDMMC_CARD_WR_THR_EN; @@ -1074,7 +1074,8 @@ static void dw_mci_ctrl_thld(struct dw_mci *host, struct mmc_data *data) enable = SDMMC_CARD_RD_THR_EN; if (host->timing != MMC_TIMING_MMC_HS200 && - host->timing != MMC_TIMING_UHS_SDR104) + host->timing != MMC_TIMING_UHS_SDR104 && + host->timing != MMC_TIMING_MMC_HS400) goto disable; blksz_depth = blksz / (1 << host->data_shift); -- cgit v1.2.3 From 717adfdaf14704fd3ec7fa2c04520c0723247eac Mon Sep 17 00:00:00 2001 From: Daniel Rosenberg Date: Mon, 2 Jul 2018 16:59:37 -0700 Subject: HID: debug: check length before copy_to_user() If our length is greater than the size of the buffer, we overflow the buffer Cc: stable@vger.kernel.org Signed-off-by: Daniel Rosenberg Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-debug.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c index 4f4e7a08a07b..4db8e140f709 100644 --- a/drivers/hid/hid-debug.c +++ b/drivers/hid/hid-debug.c @@ -1154,6 +1154,8 @@ copy_rest: goto out; if (list->tail > list->head) { len = list->tail - list->head; + if (len > count) + len = count; if (copy_to_user(buffer + ret, &list->hid_debug_buf[list->head], len)) { ret = -EFAULT; @@ -1163,6 +1165,8 @@ copy_rest: list->head += len; } else { len = HID_DEBUG_BUFSIZE - list->head; + if (len > count) + len = count; if (copy_to_user(buffer, &list->hid_debug_buf[list->head], len)) { ret = -EFAULT; @@ -1170,7 +1174,9 @@ copy_rest: } list->head = 0; ret += len; - goto copy_rest; + count -= len; + if (count > 0) + goto copy_rest; } } -- cgit v1.2.3 From 3b8d573586d1b9dee33edf6cb6f2ca05f4bca568 Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Tue, 26 Jun 2018 09:58:02 -0700 Subject: HID: wacom: Correct touch maximum XY of 2nd-gen Intuos The touch sensors on the 2nd-gen Intuos tablets don't use a 4096x4096 sensor like other similar tablets (3rd-gen Bamboo, Intuos5, etc.). The incorrect maximum XY values don't normally affect userspace since touch input from these devices is typically relative rather than absolute. It does, however, cause problems when absolute distances need to be measured, e.g. for gesture recognition. Since the resolution of the touch sensor on these devices is 10 units / mm (versus 100 for the pen sensor), the proper maximum values can be calculated by simply dividing by 10. Fixes: b5fd2a3e92 ("Input: wacom - add support for three new Intuos devices") Signed-off-by: Jason Gerecke Signed-off-by: Jiri Kosina --- drivers/hid/wacom_wac.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 0bb44d0088ed..ad7afa74d365 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -3365,8 +3365,14 @@ void wacom_setup_device_quirks(struct wacom *wacom) if (features->type >= INTUOSHT && features->type <= BAMBOO_PT) features->device_type |= WACOM_DEVICETYPE_PAD; - features->x_max = 4096; - features->y_max = 4096; + if (features->type == INTUOSHT2) { + features->x_max = features->x_max / 10; + features->y_max = features->y_max / 10; + } + else { + features->x_max = 4096; + features->y_max = 4096; + } } else if (features->pktlen == WACOM_PKGLEN_BBTOUCH) { features->device_type |= WACOM_DEVICETYPE_PAD; -- cgit v1.2.3 From 90d72ce079791399ac255c75728f3c9e747b093d Mon Sep 17 00:00:00 2001 From: Nadav Amit Date: Mon, 2 Jul 2018 19:27:13 -0700 Subject: vmw_balloon: fix inflation with batching Embarrassingly, the recent fix introduced worse problem than it solved, causing the balloon not to inflate. The VM informed the hypervisor that the pages for lock/unlock are sitting in the wrong address, as it used the page that is used the uninitialized page variable. Fixes: b23220fe054e9 ("vmw_balloon: fixing double free when batching mode is off") Cc: stable@vger.kernel.org Reviewed-by: Xavier Deguillard Signed-off-by: Nadav Amit Signed-off-by: Greg Kroah-Hartman --- drivers/misc/vmw_balloon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c index efd733472a35..56c6f79a5c5a 100644 --- a/drivers/misc/vmw_balloon.c +++ b/drivers/misc/vmw_balloon.c @@ -467,7 +467,7 @@ static int vmballoon_send_batched_lock(struct vmballoon *b, unsigned int num_pages, bool is_2m_pages, unsigned int *target) { unsigned long status; - unsigned long pfn = page_to_pfn(b->page); + unsigned long pfn = PHYS_PFN(virt_to_phys(b->batch_page)); STATS_INC(b->stats.lock[is_2m_pages]); @@ -515,7 +515,7 @@ static bool vmballoon_send_batched_unlock(struct vmballoon *b, unsigned int num_pages, bool is_2m_pages, unsigned int *target) { unsigned long status; - unsigned long pfn = page_to_pfn(b->page); + unsigned long pfn = PHYS_PFN(virt_to_phys(b->batch_page)); STATS_INC(b->stats.unlock[is_2m_pages]); -- cgit v1.2.3 From b7a020bff31318fc8785e6f96b1d38c1625cf1fb Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Thu, 7 Jun 2018 00:31:48 +0300 Subject: mei: discard messages from not connected client during power down. This fixes regression introduced by commit 8d52af6795c0 ("mei: speed up the power down flow") In power down or suspend flow a message can still be received from the FW because the clients fake disconnection. In normal case we interpret messages w/o destination as corrupted and link reset is performed in order to clean the channel, but during power down link reset is already in progress resulting in endless loop. To resolve the issue under power down flow we discard messages silently. Cc: 4.16+ Fixes: 8d52af6795c0 ("mei: speed up the power down flow") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199541 Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/interrupt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c index b0b8f18a85e3..6649f0d56d2f 100644 --- a/drivers/misc/mei/interrupt.c +++ b/drivers/misc/mei/interrupt.c @@ -310,8 +310,11 @@ int mei_irq_read_handler(struct mei_device *dev, if (&cl->link == &dev->file_list) { /* A message for not connected fixed address clients * should be silently discarded + * On power down client may be force cleaned, + * silently discard such messages */ - if (hdr_is_fixed(mei_hdr)) { + if (hdr_is_fixed(mei_hdr) || + dev->dev_state == MEI_DEV_POWER_DOWN) { mei_irq_discard_msg(dev, mei_hdr); ret = 0; goto reset_slots; -- cgit v1.2.3 From d403397c7c0821704a2f4da2694b46e423791261 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 30 Jun 2018 10:05:09 +0100 Subject: drm/i915: Try GGTT mmapping whole object as partial If the whole object is already pinned by HW for use as scanout, we will fail to move it to the mappable region and so must resort to using a partial VMA covering the whole object. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104513 Fixes: aa136d9d72c2 ("drm/i915: Convert partial ggtt vma to full ggtt if it spans the entire object") Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: Matthew Auld Reviewed-by: Matthew Auld Link: https://patchwork.freedesktop.org/patch/msgid/20180630090509.469-1-chris@chris-wilson.co.uk (cherry picked from commit 7e7367d3bc6cf27dd7e007e7897fcebfeff1ee8b) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 28 +++++++++++++++++----------- drivers/gpu/drm/i915/i915_vma.c | 2 +- 2 files changed, 18 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index d44ad7bc1e94..17c5097721e8 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2002,7 +2002,6 @@ int i915_gem_fault(struct vm_fault *vmf) bool write = !!(vmf->flags & FAULT_FLAG_WRITE); struct i915_vma *vma; pgoff_t page_offset; - unsigned int flags; int ret; /* We don't use vmf->pgoff since that has the fake offset */ @@ -2038,27 +2037,34 @@ int i915_gem_fault(struct vm_fault *vmf) goto err_unlock; } - /* If the object is smaller than a couple of partial vma, it is - * not worth only creating a single partial vma - we may as well - * clear enough space for the full object. - */ - flags = PIN_MAPPABLE; - if (obj->base.size > 2 * MIN_CHUNK_PAGES << PAGE_SHIFT) - flags |= PIN_NONBLOCK | PIN_NONFAULT; /* Now pin it into the GTT as needed */ - vma = i915_gem_object_ggtt_pin(obj, NULL, 0, 0, flags); + vma = i915_gem_object_ggtt_pin(obj, NULL, 0, 0, + PIN_MAPPABLE | + PIN_NONBLOCK | + PIN_NONFAULT); if (IS_ERR(vma)) { /* Use a partial view if it is bigger than available space */ struct i915_ggtt_view view = compute_partial_view(obj, page_offset, MIN_CHUNK_PAGES); + unsigned int flags; - /* Userspace is now writing through an untracked VMA, abandon + flags = PIN_MAPPABLE; + if (view.type == I915_GGTT_VIEW_NORMAL) + flags |= PIN_NONBLOCK; /* avoid warnings for pinned */ + + /* + * Userspace is now writing through an untracked VMA, abandon * all hope that the hardware is able to track future writes. */ obj->frontbuffer_ggtt_origin = ORIGIN_CPU; - vma = i915_gem_object_ggtt_pin(obj, &view, 0, 0, PIN_MAPPABLE); + vma = i915_gem_object_ggtt_pin(obj, &view, 0, 0, flags); + if (IS_ERR(vma) && !view.type) { + flags = PIN_MAPPABLE; + view.type = I915_GGTT_VIEW_PARTIAL; + vma = i915_gem_object_ggtt_pin(obj, &view, 0, 0, flags); + } } if (IS_ERR(vma)) { ret = PTR_ERR(vma); diff --git a/drivers/gpu/drm/i915/i915_vma.c b/drivers/gpu/drm/i915/i915_vma.c index 9324d476e0a7..0531c01c3604 100644 --- a/drivers/gpu/drm/i915/i915_vma.c +++ b/drivers/gpu/drm/i915/i915_vma.c @@ -109,7 +109,7 @@ vma_create(struct drm_i915_gem_object *obj, obj->base.size >> PAGE_SHIFT)); vma->size = view->partial.size; vma->size <<= PAGE_SHIFT; - GEM_BUG_ON(vma->size >= obj->base.size); + GEM_BUG_ON(vma->size > obj->base.size); } else if (view->type == I915_GGTT_VIEW_ROTATED) { vma->size = intel_rotation_info_size(&view->rotated); vma->size <<= PAGE_SHIFT; -- cgit v1.2.3 From 157bcc06094c3c5800d3f4676527047b79b618e7 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 25 Jun 2018 09:34:03 -0300 Subject: ARM: imx_v6_v7_defconfig: Select ULPI support Select CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS so that USB ULPI can be functional on some boards like imx51-babbge. This fixes a kernel hang in 4.18-rc1 on i.mx51-babbage, caused by commit 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51"). Suggested-by: Andrey Smirnov Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/configs/imx_v6_v7_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index f70507ab91ee..200ebda47e0c 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -302,6 +302,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_CHIPIDEA_ULPI=y CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_FTDI_SIO=m @@ -338,6 +339,7 @@ CONFIG_USB_GADGETFS=m CONFIG_USB_FUNCTIONFS=m CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m +CONFIG_USB_ULPI_BUS=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y -- cgit v1.2.3 From 2ceb2780b790b74bc408a949f6aedbad8afa693e Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 26 Jun 2018 08:37:09 -0300 Subject: ARM: imx_v4_v5_defconfig: Select ULPI support Select CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS so that USB ULPI can be functional on some boards like that use ULPI interface. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/configs/imx_v4_v5_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 054591dc9a00..4cd2f4a2bff4 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -141,9 +141,11 @@ CONFIG_USB_STORAGE=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_CHIPIDEA_ULPI=y CONFIG_NOP_USB_XCEIV=y CONFIG_USB_GADGET=y CONFIG_USB_ETH=m +CONFIG_USB_ULPI_BUS=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y -- cgit v1.2.3 From 9fea4b395260175de4016b42982f45a3e6e03d0b Mon Sep 17 00:00:00 2001 From: Evan Green Date: Mon, 2 Jul 2018 16:03:46 -0700 Subject: loop: Add LOOP_SET_BLOCK_SIZE in compat ioctl This change adds LOOP_SET_BLOCK_SIZE as one of the supported ioctls in lo_compat_ioctl. It only takes an unsigned long argument, and in practice a 32-bit value works fine. Reviewed-by: Omar Sandoval Signed-off-by: Evan Green Signed-off-by: Jens Axboe --- drivers/block/loop.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 21e6d1b3b393..258355c5a93a 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -1612,6 +1612,7 @@ static int lo_compat_ioctl(struct block_device *bdev, fmode_t mode, arg = (unsigned long) compat_ptr(arg); case LOOP_SET_FD: case LOOP_CHANGE_FD: + case LOOP_SET_BLOCK_SIZE: err = lo_ioctl(bdev, mode, cmd, arg); break; default: -- cgit v1.2.3 From c643ecf354e25ceeae14add9064d4d6253d75577 Mon Sep 17 00:00:00 2001 From: Rishabh Bhatnagar Date: Mon, 2 Jul 2018 09:35:34 -0700 Subject: lib: rhashtable: Correct self-assignment in rhashtable.c In file lib/rhashtable.c line 777, skip variable is assigned to itself. The following error was observed: lib/rhashtable.c:777:41: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] error, forbidden warning: rhashtable.c:777 This error was found when compiling with Clang 6.0. Change it to iter->skip. Signed-off-by: Rishabh Bhatnagar Acked-by: Herbert Xu Reviewed-by: NeilBrown Signed-off-by: David S. Miller --- lib/rhashtable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/rhashtable.c b/lib/rhashtable.c index 9427b5766134..3109b2e1d552 100644 --- a/lib/rhashtable.c +++ b/lib/rhashtable.c @@ -774,7 +774,7 @@ int rhashtable_walk_start_check(struct rhashtable_iter *iter) skip++; if (list == iter->list) { iter->p = p; - skip = skip; + iter->skip = skip; goto found; } } -- cgit v1.2.3 From 52ee6ef36ee10dd493cf2067311e56ca8015eb8d Mon Sep 17 00:00:00 2001 From: Doron Roberts-Kedes Date: Mon, 2 Jul 2018 10:25:05 -0700 Subject: tls: fix skb_to_sgvec returning unhandled error. The current code does not inspect the return value of skb_to_sgvec. This can cause a nullptr kernel panic when the malformed sgvec is passed into the crypto request. Checking the return value of skb_to_sgvec and skipping decryption if it is negative fixes this problem. Fixes: c46234ebb4d1 ("tls: RX path for ktls") Acked-by: Dave Watson Signed-off-by: Doron Roberts-Kedes Signed-off-by: David S. Miller --- net/tls/tls_sw.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index d2380548f8f6..7818011fd250 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -701,6 +701,10 @@ static int decrypt_skb(struct sock *sk, struct sk_buff *skb, nsg = skb_to_sgvec(skb, &sgin[1], rxm->offset + tls_ctx->rx.prepend_size, rxm->full_len - tls_ctx->rx.prepend_size); + if (nsg < 0) { + ret = nsg; + goto out; + } tls_make_aad(ctx->rx_aad_ciphertext, rxm->full_len - tls_ctx->rx.overhead_size, @@ -712,6 +716,7 @@ static int decrypt_skb(struct sock *sk, struct sk_buff *skb, rxm->full_len - tls_ctx->rx.overhead_size, skb, sk->sk_allocation); +out: if (sgin != &sgin_arr[0]) kfree(sgin); -- cgit v1.2.3 From 2d0ec5440bef4a0a8858d52d45c31725540c3e74 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Mon, 2 Jul 2018 22:49:35 +0200 Subject: r8169: fix mac address change Network core refuses to change mac address because flag IFF_LIVE_ADDR_CHANGE isn't set. Set this missing flag. Fixes: 1f7aa2bc268e ("r8169: simplify rtl_set_mac_address") Reported-by: Corinna Vinschen Signed-off-by: Heiner Kallweit Tested-by: Corinna Vinschen Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index f4cae2be0fda..a3f69901ac87 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -7789,6 +7789,7 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) NETIF_F_HW_VLAN_CTAG_RX; dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO | NETIF_F_HIGHDMA; + dev->priv_flags |= IFF_LIVE_ADDR_CHANGE; tp->cp_cmd |= RxChkSum | RxVlan; -- cgit v1.2.3 From 895b66129ad8c562865b64306032bdb378f4484f Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Fri, 29 Jun 2018 11:15:37 +0200 Subject: PM / Domains: Don't power on at attach for the multi PM domain case There are no legacy behavior in drivers to consider while attaching a device to genpd - for the multiple PM domain case. For that reason, let's instead require the driver to runtime resume the device, via calling pm_runtime_get_sync() for example, when it needs to power on the corresponding PM domain. This allows us to improve the situation during attach. Instead of always power on the PM domain, which may be unnecessary, let's leave it in its current state. Additionally, to avoid the PM domain to stay powered on, let's schedule a power off work. Fixes: 3c095f32a92b (PM / Domains: Add support for multi PM domains ...) Signed-off-by: Ulf Hansson Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/domain.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index c298de8a8308..9e8484189034 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -2235,7 +2235,7 @@ static void genpd_dev_pm_sync(struct device *dev) } static int __genpd_dev_pm_attach(struct device *dev, struct device_node *np, - unsigned int index) + unsigned int index, bool power_on) { struct of_phandle_args pd_args; struct generic_pm_domain *pd; @@ -2271,9 +2271,11 @@ static int __genpd_dev_pm_attach(struct device *dev, struct device_node *np, dev->pm_domain->detach = genpd_dev_pm_detach; dev->pm_domain->sync = genpd_dev_pm_sync; - genpd_lock(pd); - ret = genpd_power_on(pd, 0); - genpd_unlock(pd); + if (power_on) { + genpd_lock(pd); + ret = genpd_power_on(pd, 0); + genpd_unlock(pd); + } if (ret) genpd_remove_device(pd, dev); @@ -2307,7 +2309,7 @@ int genpd_dev_pm_attach(struct device *dev) "#power-domain-cells") != 1) return 0; - return __genpd_dev_pm_attach(dev, dev->of_node, 0); + return __genpd_dev_pm_attach(dev, dev->of_node, 0, true); } EXPORT_SYMBOL_GPL(genpd_dev_pm_attach); @@ -2359,14 +2361,14 @@ struct device *genpd_dev_pm_attach_by_id(struct device *dev, } /* Try to attach the device to the PM domain at the specified index. */ - ret = __genpd_dev_pm_attach(genpd_dev, dev->of_node, index); + ret = __genpd_dev_pm_attach(genpd_dev, dev->of_node, index, false); if (ret < 1) { device_unregister(genpd_dev); return ret ? ERR_PTR(ret) : NULL; } - pm_runtime_set_active(genpd_dev); pm_runtime_enable(genpd_dev); + genpd_queue_power_off_work(dev_to_genpd(genpd_dev)); return genpd_dev; } -- cgit v1.2.3 From 410da1e12ffed61129d61df5b7adce4d08c7f17c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 3 Jul 2018 09:53:43 -0700 Subject: net/smc: fix up merge error with poll changes My networking merge (commit 4e33d7d47943: "Pull networking fixes from David Miller") got the poll() handling conflict wrong for af_smc. The conflict between my a11e1d432b51 ("Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLL") and Ursula Braun's 24ac3a08e658 ("net/smc: rebuild nonblocking connect") should have left the call to sock_poll_wait() in place, just without the socket lock release/retake. And I really should have realized that. But happily, I at least asked Ursula to double-check the merge, and she set me right. This also fixes an incidental whitespace issue nearby that annoyed me while looking at this. Pointed-out-by: Ursula Braun Cc: David Miller Signed-off-by: Linus Torvalds --- net/smc/af_smc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index e017b6a4452b..3c1405df936c 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -1345,6 +1345,8 @@ static __poll_t smc_poll(struct file *file, struct socket *sock, if (sk->sk_err) mask |= EPOLLERR; } else { + if (sk->sk_state != SMC_CLOSED) + sock_poll_wait(file, sk_sleep(sk), wait); if (sk->sk_err) mask |= EPOLLERR; if ((sk->sk_shutdown == SHUTDOWN_MASK) || @@ -1370,7 +1372,6 @@ static __poll_t smc_poll(struct file *file, struct socket *sock, } if (smc->conn.urg_state == SMC_URG_VALID) mask |= EPOLLPRI; - } return mask; -- cgit v1.2.3 From fe48aecb4df837540f13b5216f27ddb306aaf4b9 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 1 Jul 2018 15:31:54 +0300 Subject: RDMA/uverbs: Don't fail in creation of multiple flows The conversion from offsetof() calculations to sizeof() wrongly behaved for missed exact size and in scenario with more than one flow. In such scenario we got "create flow failed, flow 10: 8 bytes left from uverb cmd" error, which is wrong because the size of kern_spec is exactly 8 bytes, and we were not supposed to fail. Cc: # 3.12 Fixes: 4fae7f170416 ("RDMA/uverbs: Fix slab-out-of-bounds in ib_uverbs_ex_create_flow") Reported-by: Ran Rozenstein Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/uverbs_cmd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index 87ffeebc0b28..cc06e8404e9b 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -3586,7 +3586,7 @@ int ib_uverbs_ex_create_flow(struct ib_uverbs_file *file, kern_spec = kern_flow_attr->flow_specs; ib_spec = flow_attr + 1; for (i = 0; i < flow_attr->num_of_specs && - cmd.flow_attr.size > sizeof(*kern_spec) && + cmd.flow_attr.size >= sizeof(*kern_spec) && cmd.flow_attr.size >= kern_spec->size; i++) { err = kern_spec_to_ib_spec( -- cgit v1.2.3 From dbd39cf4249316c4089b8987f20850763ebbf43e Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Thu, 31 May 2018 09:24:02 -0300 Subject: i2c: stu300: use non-archaic spelling of failes Signed-off-by: Thadeu Lima de Souza Cascardo Acked-by: Linus Walleij Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-stu300.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index e866c481bfc3..fce52bdab2b7 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -127,7 +127,7 @@ enum stu300_error { /* * The number of address send athemps tried before giving up. - * If the first one failes it seems like 5 to 8 attempts are required. + * If the first one fails it seems like 5 to 8 attempts are required. */ #define NUM_ADDR_RESEND_ATTEMPTS 12 -- cgit v1.2.3 From ed2b82c03dc187018307c7c6bf9299705f3db383 Mon Sep 17 00:00:00 2001 From: Mauricio Vasquez B Date: Fri, 29 Jun 2018 14:48:20 +0200 Subject: bpf: hash map: decrement counter on error Decrement the number of elements in the map in case the allocation of a new node fails. Fixes: 6c9059817432 ("bpf: pre-allocate hash map elements") Signed-off-by: Mauricio Vasquez B Acked-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann --- kernel/bpf/hashtab.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c index 3ca2198a6d22..513d9dfcf4ee 100644 --- a/kernel/bpf/hashtab.c +++ b/kernel/bpf/hashtab.c @@ -747,13 +747,15 @@ static struct htab_elem *alloc_htab_elem(struct bpf_htab *htab, void *key, * old element will be freed immediately. * Otherwise return an error */ - atomic_dec(&htab->count); - return ERR_PTR(-E2BIG); + l_new = ERR_PTR(-E2BIG); + goto dec_count; } l_new = kmalloc_node(htab->elem_size, GFP_ATOMIC | __GFP_NOWARN, htab->map.numa_node); - if (!l_new) - return ERR_PTR(-ENOMEM); + if (!l_new) { + l_new = ERR_PTR(-ENOMEM); + goto dec_count; + } } memcpy(l_new->key, key, key_size); @@ -766,7 +768,8 @@ static struct htab_elem *alloc_htab_elem(struct bpf_htab *htab, void *key, GFP_ATOMIC | __GFP_NOWARN); if (!pptr) { kfree(l_new); - return ERR_PTR(-ENOMEM); + l_new = ERR_PTR(-ENOMEM); + goto dec_count; } } @@ -780,6 +783,9 @@ static struct htab_elem *alloc_htab_elem(struct bpf_htab *htab, void *key, l_new->hash = hash; return l_new; +dec_count: + atomic_dec(&htab->count); + return l_new; } static int check_flags(struct bpf_htab *htab, struct htab_elem *l_old, -- cgit v1.2.3 From cf4d418e653afc84c9c873236033e06be5d58f1c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 28 Mar 2018 16:09:10 +0200 Subject: tracing: Avoid string overflow 'err' is used as a NUL-terminated string, but using strncpy() with the length equal to the buffer size may result in lack of the termination: kernel/trace/trace_events_hist.c: In function 'hist_err_event': kernel/trace/trace_events_hist.c:396:3: error: 'strncpy' specified bound 256 equals destination size [-Werror=stringop-truncation] strncpy(err, var, MAX_FILTER_STR_VAL); This changes it to use the safer strscpy() instead. Link: http://lkml.kernel.org/r/20180328140920.2842153-1-arnd@arndb.de Cc: stable@vger.kernel.org Fixes: f404da6e1d46 ("tracing: Add 'last error' error facility for hist triggers") Acked-by: Tom Zanussi Signed-off-by: Arnd Bergmann Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_events_hist.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace_events_hist.c b/kernel/trace/trace_events_hist.c index 046c716a6536..aae18af94c94 100644 --- a/kernel/trace/trace_events_hist.c +++ b/kernel/trace/trace_events_hist.c @@ -393,7 +393,7 @@ static void hist_err_event(char *str, char *system, char *event, char *var) else if (system) snprintf(err, MAX_FILTER_STR_VAL, "%s.%s", system, event); else - strncpy(err, var, MAX_FILTER_STR_VAL); + strscpy(err, var, MAX_FILTER_STR_VAL); hist_err(str, err); } -- cgit v1.2.3 From f90658725ba7ebb031054866aff4cda0d099a3b1 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Mon, 2 Jul 2018 11:41:38 -0400 Subject: tracing: Make create_filter() code match the comments The comment in create_filter() states that the passed in filter pointer (filterp) will either be NULL or contain an error message stating why the filter failed. But it also expects the filter pointer to point to NULL when passed in. If it is not, the function create_filter_start() will warn and return an error message without updating the filter pointer. This is not what the comment states. As we always expect the pointer to point to NULL, if it is not, trigger a WARN_ON(), set it to NULL, and then continue the path as the rest will work as the comment states. Also update the comment to state it must point to NULL. Reported-by: Dan Carpenter Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_events_filter.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c index 0dceb77d1d42..893a206bcba4 100644 --- a/kernel/trace/trace_events_filter.c +++ b/kernel/trace/trace_events_filter.c @@ -1701,6 +1701,7 @@ static void create_filter_finish(struct filter_parse_error *pe) * @filter_str: filter string * @set_str: remember @filter_str and enable detailed error in filter * @filterp: out param for created filter (always updated on return) + * Must be a pointer that references a NULL pointer. * * Creates a filter for @call with @filter_str. If @set_str is %true, * @filter_str is copied and recorded in the new filter. @@ -1718,6 +1719,10 @@ static int create_filter(struct trace_event_call *call, struct filter_parse_error *pe = NULL; int err; + /* filterp must point to NULL */ + if (WARN_ON(*filterp)) + *filterp = NULL; + err = create_filter_start(filter_string, set_str, &pe, filterp); if (err) return err; -- cgit v1.2.3 From f26808ba7227a921e0e8549c7d3c52332b920085 Mon Sep 17 00:00:00 2001 From: yuan linyu Date: Sun, 8 Apr 2018 19:36:31 +0800 Subject: tracing: Optimize trace_buffer_iter() logic Simplify and optimize the logic in trace_buffer_iter() to use a conditional operation instead of an if conditional. Link: http://lkml.kernel.org/r/20180408113631.3947-1-cugyly@163.com Signed-off-by: yuan linyu Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 630c5a24b2b2..f8f86231ad90 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -583,9 +583,7 @@ static __always_inline void trace_clear_recursion(int bit) static inline struct ring_buffer_iter * trace_buffer_iter(struct trace_iterator *iter, int cpu) { - if (iter->buffer_iter && iter->buffer_iter[cpu]) - return iter->buffer_iter[cpu]; - return NULL; + return iter->buffer_iter ? iter->buffer_iter[cpu] : NULL; } int tracer_init(struct tracer *t, struct trace_array *tr); -- cgit v1.2.3 From 26b68dd2f48fe7699a89f0cfbb9f4a650dc1c837 Mon Sep 17 00:00:00 2001 From: Mathieu Malaterre Date: Thu, 8 Mar 2018 21:58:43 +0100 Subject: tracing: Use __printf markup to silence compiler MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Silence warnings (triggered at W=1) by adding relevant __printf attributes. CC kernel/trace/trace.o kernel/trace/trace.c: In function ‘__trace_array_vprintk’: kernel/trace/trace.c:2979:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] len = vscnprintf(tbuffer, TRACE_BUF_SIZE, fmt, args); ^~~ AR kernel/trace/built-in.o Link: http://lkml.kernel.org/r/20180308205843.27447-1-malat@debian.org Signed-off-by: Mathieu Malaterre Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index a0079b4c7a49..f054bd6a1c66 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2953,6 +2953,7 @@ out_nobuffer: } EXPORT_SYMBOL_GPL(trace_vbprintk); +__printf(3, 0) static int __trace_array_vprintk(struct ring_buffer *buffer, unsigned long ip, const char *fmt, va_list args) @@ -3007,12 +3008,14 @@ out_nobuffer: return len; } +__printf(3, 0) int trace_array_vprintk(struct trace_array *tr, unsigned long ip, const char *fmt, va_list args) { return __trace_array_vprintk(tr->trace_buffer.buffer, ip, fmt, args); } +__printf(3, 0) int trace_array_printk(struct trace_array *tr, unsigned long ip, const char *fmt, ...) { @@ -3028,6 +3031,7 @@ int trace_array_printk(struct trace_array *tr, return ret; } +__printf(3, 4) int trace_array_printk_buf(struct ring_buffer *buffer, unsigned long ip, const char *fmt, ...) { @@ -3043,6 +3047,7 @@ int trace_array_printk_buf(struct ring_buffer *buffer, return ret; } +__printf(2, 0) int trace_vprintk(unsigned long ip, const char *fmt, va_list args) { return trace_array_vprintk(&global_trace, ip, fmt, args); -- cgit v1.2.3 From 5ccba64a560fa6ca06008d4001f5d46ebeb34b41 Mon Sep 17 00:00:00 2001 From: Yisheng Xie Date: Fri, 2 Feb 2018 10:14:49 +0800 Subject: ftrace: Nuke clear_ftrace_function clear_ftrace_function is not used outside of ftrace.c and is not help to use a function, so nuke it per Steve's suggestion. Link: http://lkml.kernel.org/r/1517537689-34947-1-git-send-email-xieyisheng1@huawei.com Suggested-by: Steven Rostedt Signed-off-by: Yisheng Xie Signed-off-by: Steven Rostedt (VMware) --- include/linux/ftrace.h | 2 -- kernel/trace/ftrace.c | 13 +------------ 2 files changed, 1 insertion(+), 14 deletions(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 8154f4920fcb..ebb77674be90 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -223,7 +223,6 @@ extern enum ftrace_tracing_type_t ftrace_tracing_type; */ int register_ftrace_function(struct ftrace_ops *ops); int unregister_ftrace_function(struct ftrace_ops *ops); -void clear_ftrace_function(void); extern void ftrace_stub(unsigned long a0, unsigned long a1, struct ftrace_ops *op, struct pt_regs *regs); @@ -239,7 +238,6 @@ static inline int ftrace_nr_registered_ops(void) { return 0; } -static inline void clear_ftrace_function(void) { } static inline void ftrace_kill(void) { } static inline void ftrace_free_init_mem(void) { } static inline void ftrace_free_mem(struct module *mod, void *start, void *end) { } diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index efed9c1cfb7e..caf9cbf35816 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -192,17 +192,6 @@ static void ftrace_pid_func(unsigned long ip, unsigned long parent_ip, op->saved_func(ip, parent_ip, op, regs); } -/** - * clear_ftrace_function - reset the ftrace function - * - * This NULLs the ftrace function and in essence stops - * tracing. There may be lag - */ -void clear_ftrace_function(void) -{ - ftrace_trace_function = ftrace_stub; -} - static void ftrace_sync(struct work_struct *work) { /* @@ -6689,7 +6678,7 @@ void ftrace_kill(void) { ftrace_disabled = 1; ftrace_enabled = 0; - clear_ftrace_function(); + ftrace_trace_function = ftrace_stub; } /** -- cgit v1.2.3 From 1fe4293f4b8de75824935f8d8e9a99c7fc6873da Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Wed, 31 Jan 2018 23:48:49 +0800 Subject: tracing: Fix missing return symbol in function_graph output The function_graph tracer does not show the interrupt return marker for the leaf entry. On leaf entries, we see an unbalanced interrupt marker (the interrupt was entered, but nevern left). Before: 1) | SyS_write() { 1) | __fdget_pos() { 1) 0.061 us | __fget_light(); 1) 0.289 us | } 1) | vfs_write() { 1) 0.049 us | rw_verify_area(); 1) + 15.424 us | __vfs_write(); 1) ==========> | 1) 6.003 us | smp_apic_timer_interrupt(); 1) 0.055 us | __fsnotify_parent(); 1) 0.073 us | fsnotify(); 1) + 23.665 us | } 1) + 24.501 us | } After: 0) | SyS_write() { 0) | __fdget_pos() { 0) 0.052 us | __fget_light(); 0) 0.328 us | } 0) | vfs_write() { 0) 0.057 us | rw_verify_area(); 0) | __vfs_write() { 0) ==========> | 0) 8.548 us | smp_apic_timer_interrupt(); 0) <========== | 0) + 36.507 us | } /* __vfs_write */ 0) 0.049 us | __fsnotify_parent(); 0) 0.066 us | fsnotify(); 0) + 50.064 us | } 0) + 50.952 us | } Link: http://lkml.kernel.org/r/1517413729-20411-1-git-send-email-changbin.du@intel.com Cc: stable@vger.kernel.org Fixes: f8b755ac8e0cc ("tracing/function-graph-tracer: Output arrows signal on hardirq call/return") Signed-off-by: Changbin Du Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_functions_graph.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c index 23c0b0cb5fb9..169b3c44ee97 100644 --- a/kernel/trace/trace_functions_graph.c +++ b/kernel/trace/trace_functions_graph.c @@ -831,6 +831,7 @@ print_graph_entry_leaf(struct trace_iterator *iter, struct ftrace_graph_ret *graph_ret; struct ftrace_graph_ent *call; unsigned long long duration; + int cpu = iter->cpu; int i; graph_ret = &ret_entry->ret; @@ -839,7 +840,6 @@ print_graph_entry_leaf(struct trace_iterator *iter, if (data) { struct fgraph_cpu_data *cpu_data; - int cpu = iter->cpu; cpu_data = per_cpu_ptr(data->cpu_data, cpu); @@ -869,6 +869,9 @@ print_graph_entry_leaf(struct trace_iterator *iter, trace_seq_printf(s, "%ps();\n", (void *)call->func); + print_graph_irq(iter, graph_ret->func, TRACE_GRAPH_RET, + cpu, iter->ent->pid, flags); + return trace_handle_return(s); } -- cgit v1.2.3 From 1e2c043628c7736dd56536d16c0ce009bc834ae7 Mon Sep 17 00:00:00 2001 From: Janosch Frank Date: Tue, 3 Jul 2018 17:02:39 -0700 Subject: userfaultfd: hugetlbfs: fix userfaultfd_huge_must_wait() pte access Use huge_ptep_get() to translate huge ptes to normal ptes so we can check them with the huge_pte_* functions. Otherwise some architectures will check the wrong values and will not wait for userspace to bring in the memory. Link: http://lkml.kernel.org/r/20180626132421.78084-1-frankja@linux.ibm.com Fixes: 369cd2121be4 ("userfaultfd: hugetlbfs: userfaultfd_huge_must_wait for hugepmd ranges") Signed-off-by: Janosch Frank Reviewed-by: David Hildenbrand Reviewed-by: Mike Kravetz Cc: Andrea Arcangeli Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/userfaultfd.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/fs/userfaultfd.c b/fs/userfaultfd.c index 123bf7d516fc..594d192b2331 100644 --- a/fs/userfaultfd.c +++ b/fs/userfaultfd.c @@ -222,24 +222,26 @@ static inline bool userfaultfd_huge_must_wait(struct userfaultfd_ctx *ctx, unsigned long reason) { struct mm_struct *mm = ctx->mm; - pte_t *pte; + pte_t *ptep, pte; bool ret = true; VM_BUG_ON(!rwsem_is_locked(&mm->mmap_sem)); - pte = huge_pte_offset(mm, address, vma_mmu_pagesize(vma)); - if (!pte) + ptep = huge_pte_offset(mm, address, vma_mmu_pagesize(vma)); + + if (!ptep) goto out; ret = false; + pte = huge_ptep_get(ptep); /* * Lockless access: we're in a wait_event so it's ok if it * changes under us. */ - if (huge_pte_none(*pte)) + if (huge_pte_none(pte)) ret = true; - if (!huge_pte_write(*pte) && (reason & VM_UFFD_WP)) + if (!huge_pte_write(pte) && (reason & VM_UFFD_WP)) ret = true; out: return ret; -- cgit v1.2.3 From 520495fe96d74e05db585fc748351e0504d8f40d Mon Sep 17 00:00:00 2001 From: Cannon Matthews Date: Tue, 3 Jul 2018 17:02:43 -0700 Subject: mm: hugetlb: yield when prepping struct pages When booting with very large numbers of gigantic (i.e. 1G) pages, the operations in the loop of gather_bootmem_prealloc, and specifically prep_compound_gigantic_page, takes a very long time, and can cause a softlockup if enough pages are requested at boot. For example booting with 3844 1G pages requires prepping (set_compound_head, init the count) over 1 billion 4K tail pages, which takes considerable time. Add a cond_resched() to the outer loop in gather_bootmem_prealloc() to prevent this lockup. Tested: Booted with softlockup_panic=1 hugepagesz=1G hugepages=3844 and no softlockup is reported, and the hugepages are reported as successfully setup. Link: http://lkml.kernel.org/r/20180627214447.260804-1-cannonmatthews@google.com Signed-off-by: Cannon Matthews Reviewed-by: Andrew Morton Reviewed-by: Mike Kravetz Acked-by: Michal Hocko Cc: Andres Lagar-Cavilla Cc: Peter Feiner Cc: Greg Thelen Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 3612fbb32e9d..039ddbc574e9 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -2163,6 +2163,7 @@ static void __init gather_bootmem_prealloc(void) */ if (hstate_is_gigantic(h)) adjust_managed_page_count(page, 1 << h->order); + cond_resched(); } } -- cgit v1.2.3 From 1e8e18f694a52d703665012ca486826f64bac29d Mon Sep 17 00:00:00 2001 From: Zhen Lei Date: Tue, 3 Jul 2018 17:02:46 -0700 Subject: kasan: fix shadow_size calculation error in kasan_module_alloc There is a special case that the size is "(N << KASAN_SHADOW_SCALE_SHIFT) Pages plus X", the value of X is [1, KASAN_SHADOW_SCALE_SIZE-1]. The operation "size >> KASAN_SHADOW_SCALE_SHIFT" will drop X, and the roundup operation can not retrieve the missed one page. For example: size=0x28006, PAGE_SIZE=0x1000, KASAN_SHADOW_SCALE_SHIFT=3, we will get shadow_size=0x5000, but actually we need 6 pages. shadow_size = round_up(size >> KASAN_SHADOW_SCALE_SHIFT, PAGE_SIZE); This can lead to a kernel crash when kasan is enabled and the value of mod->core_layout.size or mod->init_layout.size is like above. Because the shadow memory of X has not been allocated and mapped. move_module: ptr = module_alloc(mod->core_layout.size); ... memset(ptr, 0, mod->core_layout.size); //crashed Unable to handle kernel paging request at virtual address ffff0fffff97b000 ...... Call trace: __asan_storeN+0x174/0x1a8 memset+0x24/0x48 layout_and_allocate+0xcd8/0x1800 load_module+0x190/0x23e8 SyS_finit_module+0x148/0x180 Link: http://lkml.kernel.org/r/1529659626-12660-1-git-send-email-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei Reviewed-by: Dmitriy Vyukov Acked-by: Andrey Ryabinin Cc: Alexander Potapenko Cc: Hanjun Guo Cc: Libin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/kasan/kasan.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/mm/kasan/kasan.c b/mm/kasan/kasan.c index f185455b3406..c3bd5209da38 100644 --- a/mm/kasan/kasan.c +++ b/mm/kasan/kasan.c @@ -619,12 +619,13 @@ void kasan_kfree_large(void *ptr, unsigned long ip) int kasan_module_alloc(void *addr, size_t size) { void *ret; + size_t scaled_size; size_t shadow_size; unsigned long shadow_start; shadow_start = (unsigned long)kasan_mem_to_shadow(addr); - shadow_size = round_up(size >> KASAN_SHADOW_SCALE_SHIFT, - PAGE_SIZE); + scaled_size = (size + KASAN_SHADOW_MASK) >> KASAN_SHADOW_SCALE_SHIFT; + shadow_size = round_up(scaled_size, PAGE_SIZE); if (WARN_ON(!PAGE_ALIGNED(shadow_start))) return -EINVAL; -- cgit v1.2.3 From 5e4e290d3751607726a62f0b49e11261a0a9345e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 3 Jul 2018 17:02:49 -0700 Subject: ARM: disable KCOV for trusted foundations code The ARM trusted foundations code is currently broken in linux-next when CONFIG_KCOV_INSTRUMENT_ALL is set: /tmp/ccHdQsCI.s: Assembler messages: /tmp/ccHdQsCI.s:37: Error: .err encountered /tmp/ccHdQsCI.s:38: Error: .err encountered /tmp/ccHdQsCI.s:39: Error: .err encountered scripts/Makefile.build:311: recipe for target 'arch/arm/firmware/trusted_foundations.o' failed I could not find a function attribute that lets me disable -fsanitize-coverage=trace-pc for just one function, so this turns it off for the entire file instead. Link: http://lkml.kernel.org/r/20180529103636.1535457-1-arnd@arndb.de Fixes: 758517202bd2e4 ("arm: port KCOV to arm") Signed-off-by: Arnd Bergmann Acked-by: Olof Johansson Tested-by: Olof Johansson Cc: Dmitry Vyukov Cc: Mark Rutland Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/firmware/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/firmware/Makefile b/arch/arm/firmware/Makefile index a71f16536b6c..6e41336b0bc4 100644 --- a/arch/arm/firmware/Makefile +++ b/arch/arm/firmware/Makefile @@ -1 +1,4 @@ obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o + +# tf_generic_smc() fails to build with -fsanitize-coverage=trace-pc +KCOV_INSTRUMENT := n -- cgit v1.2.3 From fc36def997cfd6cbff3eda4f82853a5c311c5466 Mon Sep 17 00:00:00 2001 From: Pavel Tatashin Date: Tue, 3 Jul 2018 17:02:53 -0700 Subject: mm: teach dump_page() to correctly output poisoned struct pages If struct page is poisoned, and uninitialized access is detected via PF_POISONED_CHECK(page) dump_page() is called to output the page. But, the dump_page() itself accesses struct page to determine how to print it, and therefore gets into a recursive loop. For example: dump_page() __dump_page() PageSlab(page) PF_POISONED_CHECK(page) VM_BUG_ON_PGFLAGS(PagePoisoned(page), page) dump_page() recursion loop. Link: http://lkml.kernel.org/r/20180702180536.2552-1-pasha.tatashin@oracle.com Fixes: f165b378bbdf ("mm: uninitialized struct page poisoning sanity checking") Signed-off-by: Pavel Tatashin Acked-by: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/debug.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/mm/debug.c b/mm/debug.c index 56e2d9125ea5..38c926520c97 100644 --- a/mm/debug.c +++ b/mm/debug.c @@ -43,12 +43,25 @@ const struct trace_print_flags vmaflag_names[] = { void __dump_page(struct page *page, const char *reason) { + bool page_poisoned = PagePoisoned(page); + int mapcount; + + /* + * If struct page is poisoned don't access Page*() functions as that + * leads to recursive loop. Page*() check for poisoned pages, and calls + * dump_page() when detected. + */ + if (page_poisoned) { + pr_emerg("page:%px is uninitialized and poisoned", page); + goto hex_only; + } + /* * Avoid VM_BUG_ON() in page_mapcount(). * page->_mapcount space in struct page is used by sl[aou]b pages to * encode own info. */ - int mapcount = PageSlab(page) ? 0 : page_mapcount(page); + mapcount = PageSlab(page) ? 0 : page_mapcount(page); pr_emerg("page:%px count:%d mapcount:%d mapping:%px index:%#lx", page, page_ref_count(page), mapcount, @@ -60,6 +73,7 @@ void __dump_page(struct page *page, const char *reason) pr_emerg("flags: %#lx(%pGp)\n", page->flags, &page->flags); +hex_only: print_hex_dump(KERN_ALERT, "raw: ", DUMP_PREFIX_NONE, 32, sizeof(unsigned long), page, sizeof(struct page), false); @@ -68,7 +82,7 @@ void __dump_page(struct page *page, const char *reason) pr_alert("page dumped because: %s\n", reason); #ifdef CONFIG_MEMCG - if (page->mem_cgroup) + if (!page_poisoned && page->mem_cgroup) pr_alert("page->mem_cgroup:%px\n", page->mem_cgroup); #endif } -- cgit v1.2.3 From 077772468ec141b22e1e7c0c58bc09e2f9dc8762 Mon Sep 17 00:00:00 2001 From: Wang Dongsheng Date: Sun, 1 Jul 2018 23:15:46 -0700 Subject: net: phy: marvell: change default m88e1510 LED configuration The m88e1121 LED default configuration does not apply m88e151x. So add a function to relpace m88e1121 LED configuration. Signed-off-by: Wang Dongsheng Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 54 ++++++++++++++++++++++++++++++--------------- include/linux/marvell_phy.h | 2 ++ 2 files changed, 38 insertions(+), 18 deletions(-) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index b8f57e9b9379..1cd439bdf608 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -130,8 +130,9 @@ #define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12) #define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14) -#define MII_88E1121_PHY_LED_CTRL 16 +#define MII_PHY_LED_CTRL 16 #define MII_88E1121_PHY_LED_DEF 0x0030 +#define MII_88E1510_PHY_LED_DEF 0x1177 #define MII_M1011_PHY_STATUS 0x11 #define MII_M1011_PHY_STATUS_1000 0x8000 @@ -632,8 +633,40 @@ error: return err; } +static void marvell_config_led(struct phy_device *phydev) +{ + u16 def_config; + int err; + + switch (MARVELL_PHY_FAMILY_ID(phydev->phy_id)) { + /* Default PHY LED config: LED[0] .. Link, LED[1] .. Activity */ + case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1121R): + case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1318S): + def_config = MII_88E1121_PHY_LED_DEF; + break; + /* Default PHY LED config: + * LED[0] .. 1000Mbps Link + * LED[1] .. 100Mbps Link + * LED[2] .. Blink, Activity + */ + case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1510): + def_config = MII_88E1510_PHY_LED_DEF; + break; + default: + return; + } + + err = phy_write_paged(phydev, MII_MARVELL_LED_PAGE, MII_PHY_LED_CTRL, + def_config); + if (err < 0) + pr_warn("Fail to config marvell phy LED.\n"); +} + static int marvell_config_init(struct phy_device *phydev) { + /* Set defalut LED */ + marvell_config_led(phydev); + /* Set registers from marvell,reg-init DT property */ return marvell_of_reg_init(phydev); } @@ -813,21 +846,6 @@ static int m88e1111_config_init(struct phy_device *phydev) return genphy_soft_reset(phydev); } -static int m88e1121_config_init(struct phy_device *phydev) -{ - int err; - - /* Default PHY LED config: LED[0] .. Link, LED[1] .. Activity */ - err = phy_write_paged(phydev, MII_MARVELL_LED_PAGE, - MII_88E1121_PHY_LED_CTRL, - MII_88E1121_PHY_LED_DEF); - if (err < 0) - return err; - - /* Set marvell,reg-init configuration from device tree */ - return marvell_config_init(phydev); -} - static int m88e1318_config_init(struct phy_device *phydev) { if (phy_interrupt_is_valid(phydev)) { @@ -841,7 +859,7 @@ static int m88e1318_config_init(struct phy_device *phydev) return err; } - return m88e1121_config_init(phydev); + return marvell_config_init(phydev); } static int m88e1510_config_init(struct phy_device *phydev) @@ -2087,7 +2105,7 @@ static struct phy_driver marvell_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .probe = &m88e1121_probe, - .config_init = &m88e1121_config_init, + .config_init = &marvell_config_init, .config_aneg = &m88e1121_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h index 4f5f8c21e283..1eb6f244588d 100644 --- a/include/linux/marvell_phy.h +++ b/include/linux/marvell_phy.h @@ -27,6 +27,8 @@ */ #define MARVELL_PHY_ID_88E6390 0x01410f90 +#define MARVELL_PHY_FAMILY_ID(id) ((id) >> 4) + /* struct phy_device dev_flags definitions */ #define MARVELL_PHY_M1145_FLAGS_RESISTANCE 0x00000001 #define MARVELL_PHY_M1118_DNS323_LEDS 0x00000002 -- cgit v1.2.3 From d5a672ac9f48f81b20b1cad1d9ed7bbf4e418d4c Mon Sep 17 00:00:00 2001 From: Toke Høiland-Jørgensen Date: Mon, 2 Jul 2018 22:52:20 +0200 Subject: gen_stats: Fix netlink stats dumping in the presence of padding MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The gen_stats facility will add a header for the toplevel nlattr of type TCA_STATS2 that contains all stats added by qdisc callbacks. A reference to this header is stored in the gnet_dump struct, and when all the per-qdisc callbacks have finished adding their stats, the length of the containing header will be adjusted to the right value. However, on architectures that need padding (i.e., that don't set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), the padding nlattr is added before the stats, which means that the stored pointer will point to the padding, and so when the header is fixed up, the result is just a very big padding nlattr. Because most qdiscs also supply the legacy TCA_STATS struct, this problem has been mostly invisible, but we exposed it with the netlink attribute-based statistics in CAKE. Fix the issue by fixing up the stored pointer if it points to a padding nlattr. Tested-by: Pete Heist Tested-by: Kevin Darbyshire-Bryant Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller --- net/core/gen_stats.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/net/core/gen_stats.c b/net/core/gen_stats.c index b2b2323bdc84..188d693cb251 100644 --- a/net/core/gen_stats.c +++ b/net/core/gen_stats.c @@ -77,8 +77,20 @@ gnet_stats_start_copy_compat(struct sk_buff *skb, int type, int tc_stats_type, d->lock = lock; spin_lock_bh(lock); } - if (d->tail) - return gnet_stats_copy(d, type, NULL, 0, padattr); + if (d->tail) { + int ret = gnet_stats_copy(d, type, NULL, 0, padattr); + + /* The initial attribute added in gnet_stats_copy() may be + * preceded by a padding attribute, in which case d->tail will + * end up pointing at the padding instead of the real attribute. + * Fix this so gnet_stats_finish_copy() adjusts the length of + * the right attribute. + */ + if (ret == 0 && d->tail->nla_type == padattr) + d->tail = (struct nlattr *)((char *)d->tail + + NLA_ALIGN(d->tail->nla_len)); + return ret; + } return 0; } -- cgit v1.2.3 From 33bd5ac54dc47e002da4a395aaf9bf158dd17709 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 3 Jul 2018 14:36:21 -0700 Subject: net/ipv6: Revert attempt to simplify route replace and append NetworkManager likes to manage linklocal prefix routes and does so with the NLM_F_APPEND flag, breaking attempts to simplify the IPv6 route code and by extension enable multipath routes with device only nexthops. Revert f34436a43092 and these followup patches: 6eba08c3626b ("ipv6: Only emit append events for appended routes"). ce45bded6435 ("mlxsw: spectrum_router: Align with new route replace logic") 53b562df8c20 ("mlxsw: spectrum_router: Allow appending to dev-only routes") Update the fib_tests cases to reflect the old behavior. Fixes: f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route") Signed-off-by: David Ahern --- .../net/ethernet/mellanox/mlxsw/spectrum_router.c | 48 +++---- include/net/ip6_route.h | 6 + net/ipv6/ip6_fib.c | 156 ++++++++++++--------- net/ipv6/route.c | 3 +- tools/testing/selftests/net/fib_tests.sh | 41 ------ 5 files changed, 117 insertions(+), 137 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 6aaaf3d9ba31..77b2adb29341 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -4756,6 +4756,12 @@ static void mlxsw_sp_rt6_destroy(struct mlxsw_sp_rt6 *mlxsw_sp_rt6) kfree(mlxsw_sp_rt6); } +static bool mlxsw_sp_fib6_rt_can_mp(const struct fib6_info *rt) +{ + /* RTF_CACHE routes are ignored */ + return (rt->fib6_flags & (RTF_GATEWAY | RTF_ADDRCONF)) == RTF_GATEWAY; +} + static struct fib6_info * mlxsw_sp_fib6_entry_rt(const struct mlxsw_sp_fib6_entry *fib6_entry) { @@ -4765,11 +4771,11 @@ mlxsw_sp_fib6_entry_rt(const struct mlxsw_sp_fib6_entry *fib6_entry) static struct mlxsw_sp_fib6_entry * mlxsw_sp_fib6_node_mp_entry_find(const struct mlxsw_sp_fib_node *fib_node, - const struct fib6_info *nrt, bool append) + const struct fib6_info *nrt, bool replace) { struct mlxsw_sp_fib6_entry *fib6_entry; - if (!append) + if (!mlxsw_sp_fib6_rt_can_mp(nrt) || replace) return NULL; list_for_each_entry(fib6_entry, &fib_node->entry_list, common.list) { @@ -4784,7 +4790,8 @@ mlxsw_sp_fib6_node_mp_entry_find(const struct mlxsw_sp_fib_node *fib_node, break; if (rt->fib6_metric < nrt->fib6_metric) continue; - if (rt->fib6_metric == nrt->fib6_metric) + if (rt->fib6_metric == nrt->fib6_metric && + mlxsw_sp_fib6_rt_can_mp(rt)) return fib6_entry; if (rt->fib6_metric > nrt->fib6_metric) break; @@ -5163,7 +5170,7 @@ static struct mlxsw_sp_fib6_entry * mlxsw_sp_fib6_node_entry_find(const struct mlxsw_sp_fib_node *fib_node, const struct fib6_info *nrt, bool replace) { - struct mlxsw_sp_fib6_entry *fib6_entry; + struct mlxsw_sp_fib6_entry *fib6_entry, *fallback = NULL; list_for_each_entry(fib6_entry, &fib_node->entry_list, common.list) { struct fib6_info *rt = mlxsw_sp_fib6_entry_rt(fib6_entry); @@ -5172,13 +5179,18 @@ mlxsw_sp_fib6_node_entry_find(const struct mlxsw_sp_fib_node *fib_node, continue; if (rt->fib6_table->tb6_id != nrt->fib6_table->tb6_id) break; - if (replace && rt->fib6_metric == nrt->fib6_metric) - return fib6_entry; + if (replace && rt->fib6_metric == nrt->fib6_metric) { + if (mlxsw_sp_fib6_rt_can_mp(rt) == + mlxsw_sp_fib6_rt_can_mp(nrt)) + return fib6_entry; + if (mlxsw_sp_fib6_rt_can_mp(nrt)) + fallback = fallback ?: fib6_entry; + } if (rt->fib6_metric > nrt->fib6_metric) - return fib6_entry; + return fallback ?: fib6_entry; } - return NULL; + return fallback; } static int @@ -5304,8 +5316,7 @@ static void mlxsw_sp_fib6_entry_replace(struct mlxsw_sp *mlxsw_sp, } static int mlxsw_sp_router_fib6_add(struct mlxsw_sp *mlxsw_sp, - struct fib6_info *rt, bool replace, - bool append) + struct fib6_info *rt, bool replace) { struct mlxsw_sp_fib6_entry *fib6_entry; struct mlxsw_sp_fib_node *fib_node; @@ -5331,7 +5342,7 @@ static int mlxsw_sp_router_fib6_add(struct mlxsw_sp *mlxsw_sp, /* Before creating a new entry, try to append route to an existing * multipath entry. */ - fib6_entry = mlxsw_sp_fib6_node_mp_entry_find(fib_node, rt, append); + fib6_entry = mlxsw_sp_fib6_node_mp_entry_find(fib_node, rt, replace); if (fib6_entry) { err = mlxsw_sp_fib6_entry_nexthop_add(mlxsw_sp, fib6_entry, rt); if (err) @@ -5339,14 +5350,6 @@ static int mlxsw_sp_router_fib6_add(struct mlxsw_sp *mlxsw_sp, return 0; } - /* We received an append event, yet did not find any route to - * append to. - */ - if (WARN_ON(append)) { - err = -EINVAL; - goto err_fib6_entry_append; - } - fib6_entry = mlxsw_sp_fib6_entry_create(mlxsw_sp, fib_node, rt); if (IS_ERR(fib6_entry)) { err = PTR_ERR(fib6_entry); @@ -5364,7 +5367,6 @@ static int mlxsw_sp_router_fib6_add(struct mlxsw_sp *mlxsw_sp, err_fib6_node_entry_link: mlxsw_sp_fib6_entry_destroy(mlxsw_sp, fib6_entry); err_fib6_entry_create: -err_fib6_entry_append: err_fib6_entry_nexthop_add: mlxsw_sp_fib_node_put(mlxsw_sp, fib_node); return err; @@ -5715,7 +5717,7 @@ static void mlxsw_sp_router_fib6_event_work(struct work_struct *work) struct mlxsw_sp_fib_event_work *fib_work = container_of(work, struct mlxsw_sp_fib_event_work, work); struct mlxsw_sp *mlxsw_sp = fib_work->mlxsw_sp; - bool replace, append; + bool replace; int err; rtnl_lock(); @@ -5726,10 +5728,8 @@ static void mlxsw_sp_router_fib6_event_work(struct work_struct *work) case FIB_EVENT_ENTRY_APPEND: /* fall through */ case FIB_EVENT_ENTRY_ADD: replace = fib_work->event == FIB_EVENT_ENTRY_REPLACE; - append = fib_work->event == FIB_EVENT_ENTRY_APPEND; err = mlxsw_sp_router_fib6_add(mlxsw_sp, - fib_work->fen6_info.rt, replace, - append); + fib_work->fen6_info.rt, replace); if (err) mlxsw_sp_router_fib_abort(mlxsw_sp); mlxsw_sp_rt6_release(fib_work->fen6_info.rt); diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h index 59656fc580df..7b9c82de11cc 100644 --- a/include/net/ip6_route.h +++ b/include/net/ip6_route.h @@ -66,6 +66,12 @@ static inline bool rt6_need_strict(const struct in6_addr *daddr) (IPV6_ADDR_MULTICAST | IPV6_ADDR_LINKLOCAL | IPV6_ADDR_LOOPBACK); } +static inline bool rt6_qualify_for_ecmp(const struct fib6_info *f6i) +{ + return (f6i->fib6_flags & (RTF_GATEWAY|RTF_ADDRCONF|RTF_DYNAMIC)) == + RTF_GATEWAY; +} + void ip6_route_input(struct sk_buff *skb); struct dst_entry *ip6_route_input_lookup(struct net *net, struct net_device *dev, diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index 1fb2f3118d60..d212738e9d10 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -935,20 +935,19 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct fib6_info *rt, { struct fib6_info *leaf = rcu_dereference_protected(fn->leaf, lockdep_is_held(&rt->fib6_table->tb6_lock)); - enum fib_event_type event = FIB_EVENT_ENTRY_ADD; - struct fib6_info *iter = NULL, *match = NULL; + struct fib6_info *iter = NULL; struct fib6_info __rcu **ins; + struct fib6_info __rcu **fallback_ins = NULL; int replace = (info->nlh && (info->nlh->nlmsg_flags & NLM_F_REPLACE)); - int append = (info->nlh && - (info->nlh->nlmsg_flags & NLM_F_APPEND)); int add = (!info->nlh || (info->nlh->nlmsg_flags & NLM_F_CREATE)); int found = 0; + bool rt_can_ecmp = rt6_qualify_for_ecmp(rt); u16 nlflags = NLM_F_EXCL; int err; - if (append) + if (info->nlh && (info->nlh->nlmsg_flags & NLM_F_APPEND)) nlflags |= NLM_F_APPEND; ins = &fn->leaf; @@ -970,8 +969,13 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct fib6_info *rt, nlflags &= ~NLM_F_EXCL; if (replace) { - found++; - break; + if (rt_can_ecmp == rt6_qualify_for_ecmp(iter)) { + found++; + break; + } + if (rt_can_ecmp) + fallback_ins = fallback_ins ?: ins; + goto next_iter; } if (rt6_duplicate_nexthop(iter, rt)) { @@ -986,51 +990,71 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct fib6_info *rt, fib6_metric_set(iter, RTAX_MTU, rt->fib6_pmtu); return -EEXIST; } - - /* first route that matches */ - if (!match) - match = iter; + /* If we have the same destination and the same metric, + * but not the same gateway, then the route we try to + * add is sibling to this route, increment our counter + * of siblings, and later we will add our route to the + * list. + * Only static routes (which don't have flag + * RTF_EXPIRES) are used for ECMPv6. + * + * To avoid long list, we only had siblings if the + * route have a gateway. + */ + if (rt_can_ecmp && + rt6_qualify_for_ecmp(iter)) + rt->fib6_nsiblings++; } if (iter->fib6_metric > rt->fib6_metric) break; +next_iter: ins = &iter->fib6_next; } + if (fallback_ins && !found) { + /* No ECMP-able route found, replace first non-ECMP one */ + ins = fallback_ins; + iter = rcu_dereference_protected(*ins, + lockdep_is_held(&rt->fib6_table->tb6_lock)); + found++; + } + /* Reset round-robin state, if necessary */ if (ins == &fn->leaf) fn->rr_ptr = NULL; /* Link this route to others same route. */ - if (append && match) { + if (rt->fib6_nsiblings) { + unsigned int fib6_nsiblings; struct fib6_info *sibling, *temp_sibling; - if (rt->fib6_flags & RTF_REJECT) { - NL_SET_ERR_MSG(extack, - "Can not append a REJECT route"); - return -EINVAL; - } else if (match->fib6_flags & RTF_REJECT) { - NL_SET_ERR_MSG(extack, - "Can not append to a REJECT route"); - return -EINVAL; + /* Find the first route that have the same metric */ + sibling = leaf; + while (sibling) { + if (sibling->fib6_metric == rt->fib6_metric && + rt6_qualify_for_ecmp(sibling)) { + list_add_tail(&rt->fib6_siblings, + &sibling->fib6_siblings); + break; + } + sibling = rcu_dereference_protected(sibling->fib6_next, + lockdep_is_held(&rt->fib6_table->tb6_lock)); } - event = FIB_EVENT_ENTRY_APPEND; - rt->fib6_nsiblings = match->fib6_nsiblings; - list_add_tail(&rt->fib6_siblings, &match->fib6_siblings); - match->fib6_nsiblings++; - /* For each sibling in the list, increment the counter of * siblings. BUG() if counters does not match, list of siblings * is broken! */ + fib6_nsiblings = 0; list_for_each_entry_safe(sibling, temp_sibling, - &match->fib6_siblings, fib6_siblings) { + &rt->fib6_siblings, fib6_siblings) { sibling->fib6_nsiblings++; - BUG_ON(sibling->fib6_nsiblings != match->fib6_nsiblings); + BUG_ON(sibling->fib6_nsiblings != rt->fib6_nsiblings); + fib6_nsiblings++; } - - rt6_multipath_rebalance(match); + BUG_ON(fib6_nsiblings != rt->fib6_nsiblings); + rt6_multipath_rebalance(temp_sibling); } /* @@ -1043,8 +1067,9 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct fib6_info *rt, add: nlflags |= NLM_F_CREATE; - err = call_fib6_entry_notifiers(info->nl_net, event, rt, - extack); + err = call_fib6_entry_notifiers(info->nl_net, + FIB_EVENT_ENTRY_ADD, + rt, extack); if (err) return err; @@ -1062,7 +1087,7 @@ add: } } else { - struct fib6_info *tmp; + int nsiblings; if (!found) { if (add) @@ -1077,57 +1102,48 @@ add: if (err) return err; - /* if route being replaced has siblings, set tmp to - * last one, otherwise tmp is current route. this is - * used to set fib6_next for new route - */ - if (iter->fib6_nsiblings) - tmp = list_last_entry(&iter->fib6_siblings, - struct fib6_info, - fib6_siblings); - else - tmp = iter; - - /* insert new route */ atomic_inc(&rt->fib6_ref); rcu_assign_pointer(rt->fib6_node, fn); - rt->fib6_next = tmp->fib6_next; + rt->fib6_next = iter->fib6_next; rcu_assign_pointer(*ins, rt); - if (!info->skip_notify) inet6_rt_notify(RTM_NEWROUTE, rt, info, NLM_F_REPLACE); if (!(fn->fn_flags & RTN_RTINFO)) { info->nl_net->ipv6.rt6_stats->fib_route_nodes++; fn->fn_flags |= RTN_RTINFO; } + nsiblings = iter->fib6_nsiblings; + iter->fib6_node = NULL; + fib6_purge_rt(iter, fn, info->nl_net); + if (rcu_access_pointer(fn->rr_ptr) == iter) + fn->rr_ptr = NULL; + fib6_info_release(iter); - /* delete old route */ - rt = iter; - - if (rt->fib6_nsiblings) { - struct fib6_info *tmp; - + if (nsiblings) { /* Replacing an ECMP route, remove all siblings */ - list_for_each_entry_safe(iter, tmp, &rt->fib6_siblings, - fib6_siblings) { - iter->fib6_node = NULL; - fib6_purge_rt(iter, fn, info->nl_net); - if (rcu_access_pointer(fn->rr_ptr) == iter) - fn->rr_ptr = NULL; - fib6_info_release(iter); - - rt->fib6_nsiblings--; - info->nl_net->ipv6.rt6_stats->fib_rt_entries--; + ins = &rt->fib6_next; + iter = rcu_dereference_protected(*ins, + lockdep_is_held(&rt->fib6_table->tb6_lock)); + while (iter) { + if (iter->fib6_metric > rt->fib6_metric) + break; + if (rt6_qualify_for_ecmp(iter)) { + *ins = iter->fib6_next; + iter->fib6_node = NULL; + fib6_purge_rt(iter, fn, info->nl_net); + if (rcu_access_pointer(fn->rr_ptr) == iter) + fn->rr_ptr = NULL; + fib6_info_release(iter); + nsiblings--; + info->nl_net->ipv6.rt6_stats->fib_rt_entries--; + } else { + ins = &iter->fib6_next; + } + iter = rcu_dereference_protected(*ins, + lockdep_is_held(&rt->fib6_table->tb6_lock)); } + WARN_ON(nsiblings != 0); } - - WARN_ON(rt->fib6_nsiblings != 0); - - rt->fib6_node = NULL; - fib6_purge_rt(rt, fn, info->nl_net); - if (rcu_access_pointer(fn->rr_ptr) == rt) - fn->rr_ptr = NULL; - fib6_info_release(rt); } return 0; diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 86a0e4333d42..63f99411f0de 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -3842,7 +3842,7 @@ static struct fib6_info *rt6_multipath_first_sibling(const struct fib6_info *rt) lockdep_is_held(&rt->fib6_table->tb6_lock)); while (iter) { if (iter->fib6_metric == rt->fib6_metric && - iter->fib6_nsiblings) + rt6_qualify_for_ecmp(iter)) return iter; iter = rcu_dereference_protected(iter->fib6_next, lockdep_is_held(&rt->fib6_table->tb6_lock)); @@ -4439,7 +4439,6 @@ static int ip6_route_multipath_add(struct fib6_config *cfg, */ cfg->fc_nlinfo.nlh->nlmsg_flags &= ~(NLM_F_EXCL | NLM_F_REPLACE); - cfg->fc_nlinfo.nlh->nlmsg_flags |= NLM_F_APPEND; nhn++; } diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh index 78245d60d8bc..0f45633bd634 100755 --- a/tools/testing/selftests/net/fib_tests.sh +++ b/tools/testing/selftests/net/fib_tests.sh @@ -740,13 +740,6 @@ ipv6_rt_add() run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64" log_test $? 2 "Attempt to add duplicate route - reject route" - # iproute2 prepend only sets NLM_F_CREATE - # - adds a new route; does NOT convert existing route to ECMP - add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" - run_cmd "$IP -6 ro prepend 2001:db8:104::/64 via 2001:db8:103::2" - check_route6 "2001:db8:104::/64 via 2001:db8:101::2 dev veth1 metric 1024 2001:db8:104::/64 via 2001:db8:103::2 dev veth3 metric 1024" - log_test $? 0 "Add new route for existing prefix (w/o NLM_F_EXCL)" - # route append with same prefix adds a new route # - iproute2 sets NLM_F_CREATE | NLM_F_APPEND add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" @@ -754,27 +747,6 @@ ipv6_rt_add() check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" log_test $? 0 "Append nexthop to existing route - gw" - add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" - run_cmd "$IP -6 ro append 2001:db8:104::/64 dev veth3" - check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop dev veth3 weight 1" - log_test $? 0 "Append nexthop to existing route - dev only" - - # multipath route can not have a nexthop that is a reject route - add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" - run_cmd "$IP -6 ro append unreachable 2001:db8:104::/64" - log_test $? 2 "Append nexthop to existing route - reject route" - - # reject route can not be converted to multipath route - run_cmd "$IP -6 ro flush 2001:db8:104::/64" - run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64" - run_cmd "$IP -6 ro append 2001:db8:104::/64 via 2001:db8:103::2" - log_test $? 2 "Append nexthop to existing reject route - gw" - - run_cmd "$IP -6 ro flush 2001:db8:104::/64" - run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64" - run_cmd "$IP -6 ro append 2001:db8:104::/64 dev veth3" - log_test $? 2 "Append nexthop to existing reject route - dev only" - # insert mpath directly add_route6 "2001:db8:104::/64" "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" @@ -819,13 +791,6 @@ ipv6_rt_replace_single() check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::3 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" log_test $? 0 "Single path with multipath" - # single path with reject - # - add_initial_route6 "nexthop via 2001:db8:101::2" - run_cmd "$IP -6 ro replace unreachable 2001:db8:104::/64" - check_route6 "unreachable 2001:db8:104::/64 dev lo metric 1024" - log_test $? 0 "Single path with reject route" - # single path with single path using MULTIPATH attribute # add_initial_route6 "via 2001:db8:101::2" @@ -873,12 +838,6 @@ ipv6_rt_replace_mpath() check_route6 "2001:db8:104::/64 via 2001:db8:101::3 dev veth1 metric 1024" log_test $? 0 "Multipath with single path via multipath attribute" - # multipath with reject - add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" - run_cmd "$IP -6 ro replace unreachable 2001:db8:104::/64" - check_route6 "unreachable 2001:db8:104::/64 dev lo metric 1024" - log_test $? 0 "Multipath with reject route" - # route replace fails - invalid nexthop 1 add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:111::3 nexthop via 2001:db8:103::3" -- cgit v1.2.3 From 8bf935501a7ef1b2ec3b51c804d657d5895f221a Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sat, 30 Jun 2018 10:53:57 +0200 Subject: s390: wire up io_pgetevents system call Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/syscalls/syscall.tbl | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/kernel/syscalls/syscall.tbl b/arch/s390/kernel/syscalls/syscall.tbl index 8b210ead7956..4baefed5fefb 100644 --- a/arch/s390/kernel/syscalls/syscall.tbl +++ b/arch/s390/kernel/syscalls/syscall.tbl @@ -389,3 +389,4 @@ 379 common statx sys_statx compat_sys_statx 380 common s390_sthyi sys_s390_sthyi compat_sys_s390_sthyi 381 common kexec_file_load sys_kexec_file_load compat_sys_kexec_file_load +382 common io_pgetevents sys_io_pgetevents compat_sys_io_pgetevents -- cgit v1.2.3 From 9d6d99e3ac8ccfd0945edb3c83cd912838775056 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sat, 30 Jun 2018 10:54:15 +0200 Subject: s390: wire up rseq system call Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 1 + arch/s390/kernel/compat_wrapper.c | 1 + arch/s390/kernel/entry.S | 4 ++++ arch/s390/kernel/signal.c | 3 ++- arch/s390/kernel/syscalls/syscall.tbl | 1 + 5 files changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index baed39772c84..e44bb2b2873e 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -160,6 +160,7 @@ config S390 select HAVE_OPROFILE select HAVE_PERF_EVENTS select HAVE_REGS_AND_STACK_ACCESS_API + select HAVE_RSEQ select HAVE_SYSCALL_TRACEPOINTS select HAVE_VIRT_CPU_ACCOUNTING select MODULES_USE_ELF_RELA diff --git a/arch/s390/kernel/compat_wrapper.c b/arch/s390/kernel/compat_wrapper.c index 607c5e9fba3d..2ce28bf0c5ec 100644 --- a/arch/s390/kernel/compat_wrapper.c +++ b/arch/s390/kernel/compat_wrapper.c @@ -183,3 +183,4 @@ COMPAT_SYSCALL_WRAP2(s390_guarded_storage, int, command, struct gs_cb *, gs_cb); COMPAT_SYSCALL_WRAP5(statx, int, dfd, const char __user *, path, unsigned, flags, unsigned, mask, struct statx __user *, buffer); COMPAT_SYSCALL_WRAP4(s390_sthyi, unsigned long, code, void __user *, info, u64 __user *, rc, unsigned long, flags); COMPAT_SYSCALL_WRAP5(kexec_file_load, int, kernel_fd, int, initrd_fd, unsigned long, cmdline_len, const char __user *, cmdline_ptr, unsigned long, flags) +COMPAT_SYSCALL_WRAP4(rseq, struct rseq __user *, rseq, u32, rseq_len, int, flags, u32, sig) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 3891805bfcdd..150130c897c3 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -357,6 +357,10 @@ ENTRY(system_call) stg %r2,__PT_R2(%r11) # store return value .Lsysc_return: +#ifdef CONFIG_DEBUG_RSEQ + lgr %r2,%r11 + brasl %r14,rseq_syscall +#endif LOCKDEP_SYS_EXIT .Lsysc_tif: TSTMSK __PT_FLAGS(%r11),_PIF_WORK diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index 2d2960ab3e10..22f08245aa5d 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -498,7 +498,7 @@ void do_signal(struct pt_regs *regs) } /* No longer in a system call */ clear_pt_regs_flag(regs, PIF_SYSCALL); - + rseq_signal_deliver(&ksig, regs); if (is_compat_task()) handle_signal32(&ksig, oldset, regs); else @@ -537,4 +537,5 @@ void do_notify_resume(struct pt_regs *regs) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + rseq_handle_notify_resume(NULL, regs); } diff --git a/arch/s390/kernel/syscalls/syscall.tbl b/arch/s390/kernel/syscalls/syscall.tbl index 4baefed5fefb..022fc099b628 100644 --- a/arch/s390/kernel/syscalls/syscall.tbl +++ b/arch/s390/kernel/syscalls/syscall.tbl @@ -390,3 +390,4 @@ 380 common s390_sthyi sys_s390_sthyi compat_sys_s390_sthyi 381 common kexec_file_load sys_kexec_file_load compat_sys_kexec_file_load 382 common io_pgetevents sys_io_pgetevents compat_sys_io_pgetevents +383 common rseq sys_rseq compat_sys_rseq -- cgit v1.2.3 From c660f40b711980b42d8beac4b395a10645b20d5d Mon Sep 17 00:00:00 2001 From: Nicolai Hähnle Date: Fri, 29 Jun 2018 13:23:25 +0200 Subject: drm/amdgpu: fix user fence write race condition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The buffer object backing the user fence is reserved using the non-user fence, i.e., as soon as the non-user fence is signaled, the user fence buffer object can be moved or even destroyed. Therefore, emit the user fence first. Both fences have the same cache invalidation behavior, so this should have no user-visible effect. Signed-off-by: Nicolai Hähnle Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c index f70eeed9ed76..7aaa263ad8c7 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c @@ -231,6 +231,12 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs, if (ib->flags & AMDGPU_IB_FLAG_TC_WB_NOT_INVALIDATE) fence_flags |= AMDGPU_FENCE_FLAG_TC_WB_ONLY; + /* wrap the last IB with fence */ + if (job && job->uf_addr) { + amdgpu_ring_emit_fence(ring, job->uf_addr, job->uf_sequence, + fence_flags | AMDGPU_FENCE_FLAG_64BIT); + } + r = amdgpu_fence_emit(ring, f, fence_flags); if (r) { dev_err(adev->dev, "failed to emit fence (%d)\n", r); @@ -243,12 +249,6 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs, if (ring->funcs->insert_end) ring->funcs->insert_end(ring); - /* wrap the last IB with fence */ - if (job && job->uf_addr) { - amdgpu_ring_emit_fence(ring, job->uf_addr, job->uf_sequence, - fence_flags | AMDGPU_FENCE_FLAG_64BIT); - } - if (patch_offset != ~0 && ring->funcs->patch_cond_exec) amdgpu_ring_patch_cond_exec(ring, patch_offset); -- cgit v1.2.3 From 673b4271665a12fa839a12abb50e6f6e9953c081 Mon Sep 17 00:00:00 2001 From: Jouke Witteveen Date: Wed, 4 Jul 2018 12:27:15 +0200 Subject: ACPI / battery: Safe unregistering of hooks A hooking API was implemented for 4.17 in fa93854f7a7ed63d followed by hooks for Thinkpad laptops in 2801b9683f740012. The Thinkpad drivers did not support the Thinkpad 13 and the hooking API crashes on unsupported batteries by altering a list of hooks during unsafe iteration. Thus, Thinkpad 13 laptops could no longer boot. Additionally, a lock was kept in place and debugging information was printed out of order. Fixes: fa93854f7a7e (battery: Add the battery hooking API) Cc: 4.17+ # 4.17+ Signed-off-by: Jouke Witteveen Signed-off-by: Rafael J. Wysocki --- drivers/acpi/battery.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index b0113a5802a3..d79ad844c78f 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -717,10 +717,11 @@ void battery_hook_register(struct acpi_battery_hook *hook) */ pr_err("extension failed to load: %s", hook->name); __battery_hook_unregister(hook, 0); - return; + goto end; } } pr_info("new extension: %s\n", hook->name); +end: mutex_unlock(&hook_mutex); } EXPORT_SYMBOL_GPL(battery_hook_register); @@ -732,7 +733,7 @@ EXPORT_SYMBOL_GPL(battery_hook_register); */ static void battery_hook_add_battery(struct acpi_battery *battery) { - struct acpi_battery_hook *hook_node; + struct acpi_battery_hook *hook_node, *tmp; mutex_lock(&hook_mutex); INIT_LIST_HEAD(&battery->list); @@ -744,15 +745,15 @@ static void battery_hook_add_battery(struct acpi_battery *battery) * when a battery gets hotplugged or initialized * during the battery module initialization. */ - list_for_each_entry(hook_node, &battery_hook_list, list) { + list_for_each_entry_safe(hook_node, tmp, &battery_hook_list, list) { if (hook_node->add_battery(battery->bat)) { /* * The notification of the extensions has failed, to * prevent further errors we will unload the extension. */ - __battery_hook_unregister(hook_node, 0); pr_err("error in extension, unloading: %s", hook_node->name); + __battery_hook_unregister(hook_node, 0); } } mutex_unlock(&hook_mutex); -- cgit v1.2.3 From a65925475571953da12a9bc2082aec29d4e2c0e7 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Tue, 3 Jul 2018 16:30:47 +0800 Subject: sctp: fix the issue that pathmtu may be set lower than MINSEGMENT After commit b6c5734db070 ("sctp: fix the handling of ICMP Frag Needed for too small MTUs"), sctp_transport_update_pmtu would refetch pathmtu from the dst and set it to transport's pathmtu without any check. The new pathmtu may be lower than MINSEGMENT if the dst is obsolete and updated by .get_dst() in sctp_transport_update_pmtu. In this case, it could have a smaller MTU as well, and thus we should validate it against MINSEGMENT instead. Syzbot reported a warning in sctp_mtu_payload caused by this. This patch refetches the pathmtu by calling sctp_dst_mtu where it does the check against MINSEGMENT. v1->v2: - refetch the pathmtu by calling sctp_dst_mtu instead as Marcelo's suggestion. Fixes: b6c5734db070 ("sctp: fix the handling of ICMP Frag Needed for too small MTUs") Reported-by: syzbot+f0d9d7cba052f9344b03@syzkaller.appspotmail.com Suggested-by: Marcelo Ricardo Leitner Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/sctp/transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sctp/transport.c b/net/sctp/transport.c index 445b7ef61677..12cac85da994 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -282,7 +282,7 @@ bool sctp_transport_update_pmtu(struct sctp_transport *t, u32 pmtu) if (dst) { /* Re-fetch, as under layers may have a higher minimum size */ - pmtu = SCTP_TRUNC4(dst_mtu(dst)); + pmtu = sctp_dst_mtu(dst); change = t->pathmtu != pmtu; } t->pathmtu = pmtu; -- cgit v1.2.3 From d461e3da905332189aad546b2ad9adbe6071c7cc Mon Sep 17 00:00:00 2001 From: Yuiko Oshino Date: Tue, 3 Jul 2018 11:21:46 -0400 Subject: smsc75xx: Add workaround for gigabit link up hardware errata. In certain conditions, the device may not be able to link in gigabit mode. This software workaround ensures that the device will not enter the failure state. Fixes: d0cad871703b898a442e4049c532ec39168e5b57 ("SMSC75XX USB 2.0 Gigabit Ethernet Devices") Signed-off-by: Yuiko Oshino Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 62 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 7a6a1fe79309..05553d252446 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -82,6 +82,9 @@ static bool turbo_mode = true; module_param(turbo_mode, bool, 0644); MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction"); +static int smsc75xx_link_ok_nopm(struct usbnet *dev); +static int smsc75xx_phy_gig_workaround(struct usbnet *dev); + static int __must_check __smsc75xx_read_reg(struct usbnet *dev, u32 index, u32 *data, int in_pm) { @@ -852,6 +855,9 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) return -EIO; } + /* phy workaround for gig link */ + smsc75xx_phy_gig_workaround(dev); + smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); @@ -987,6 +993,62 @@ static int smsc75xx_wait_ready(struct usbnet *dev, int in_pm) return -EIO; } +static int smsc75xx_phy_gig_workaround(struct usbnet *dev) +{ + struct mii_if_info *mii = &dev->mii; + int ret = 0, timeout = 0; + u32 buf, link_up = 0; + + /* Set the phy in Gig loopback */ + smsc75xx_mdio_write(dev->net, mii->phy_id, MII_BMCR, 0x4040); + + /* Wait for the link up */ + do { + link_up = smsc75xx_link_ok_nopm(dev); + usleep_range(10000, 20000); + timeout++; + } while ((!link_up) && (timeout < 1000)); + + if (timeout >= 1000) { + netdev_warn(dev->net, "Timeout waiting for PHY link up\n"); + return -EIO; + } + + /* phy reset */ + ret = smsc75xx_read_reg(dev, PMT_CTL, &buf); + if (ret < 0) { + netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n", ret); + return ret; + } + + buf |= PMT_CTL_PHY_RST; + + ret = smsc75xx_write_reg(dev, PMT_CTL, buf); + if (ret < 0) { + netdev_warn(dev->net, "Failed to write PMT_CTL: %d\n", ret); + return ret; + } + + timeout = 0; + do { + usleep_range(10000, 20000); + ret = smsc75xx_read_reg(dev, PMT_CTL, &buf); + if (ret < 0) { + netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n", + ret); + return ret; + } + timeout++; + } while ((buf & PMT_CTL_PHY_RST) && (timeout < 100)); + + if (timeout >= 100) { + netdev_warn(dev->net, "timeout waiting for PHY Reset\n"); + return -EIO; + } + + return 0; +} + static int smsc75xx_reset(struct usbnet *dev) { struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); -- cgit v1.2.3 From e33eab9ded328ccc14308afa51b5be7cbe78d30b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 4 Jul 2018 12:29:38 +0300 Subject: USB: serial: ch341: fix type promotion bug in ch341_control_in() The "r" variable is an int and "bufsize" is an unsigned int so the comparison is type promoted to unsigned. If usb_control_msg() returns a negative that is treated as a high positive value and the error handling doesn't work. Fixes: 2d5a9c72d0c4 ("USB: serial: ch341: fix control-message error handling") Signed-off-by: Dan Carpenter Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ch341.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index bdd7a5ad3bf1..3bb1fff02bed 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -128,7 +128,7 @@ static int ch341_control_in(struct usb_device *dev, r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, value, index, buf, bufsize, DEFAULT_TIMEOUT); - if (r < bufsize) { + if (r < (int)bufsize) { if (r >= 0) { dev_err(&dev->dev, "short control message received (%d < %u)\n", -- cgit v1.2.3 From 367b160fe4717c14a2a978b6f9ffb75a7762d3ed Mon Sep 17 00:00:00 2001 From: Olli Salonen Date: Wed, 4 Jul 2018 14:07:42 +0300 Subject: USB: serial: cp210x: add another USB ID for Qivicon ZigBee stick There are two versions of the Qivicon Zigbee stick in circulation. This adds the second USB ID to the cp210x driver. Signed-off-by: Olli Salonen Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index ee0cc1d90b51..626a29d9aa58 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -149,6 +149,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */ { USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */ { USB_DEVICE(0x10C4, 0x89A4) }, /* CESINEL FTBC Flexible Thyristor Bridge Controller */ + { USB_DEVICE(0x10C4, 0x89FB) }, /* Qivicon ZigBee USB Radio Stick */ { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */ { USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */ { USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */ -- cgit v1.2.3 From f0139752f71b05c918d86101643eb00b312ab883 Mon Sep 17 00:00:00 2001 From: Maciej Purski Date: Thu, 28 Jun 2018 18:44:01 +0200 Subject: drm/bridge/sii8620: Send AVI infoframe in all MHL versions Currently AVI infoframe is sent only in MHL3. However, some MHL2 dongles need AVI infoframe to work correctly in either packed pixel mode or non-packed pixel mode. Send AVI infoframe in set_infoframes() in every case. Create an infoframe using drm_hdmi_infoframe_from_display_mode() instead of manually filling each infoframe structure's field. Signed-off-by: Maciej Purski Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-2-git-send-email-m.purski@samsung.com --- drivers/gpu/drm/bridge/sil-sii8620.c | 39 ++++++++++++++++++------------------ 1 file changed, 19 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c index 250effa0e6b8..bd30ccf3d195 100644 --- a/drivers/gpu/drm/bridge/sil-sii8620.c +++ b/drivers/gpu/drm/bridge/sil-sii8620.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -72,9 +73,7 @@ struct sii8620 { struct regulator_bulk_data supplies[2]; struct mutex lock; /* context lock, protects fields below */ int error; - int pixel_clock; unsigned int use_packed_pixel:1; - int video_code; enum sii8620_mode mode; enum sii8620_sink_type sink_type; u8 cbus_status; @@ -82,7 +81,6 @@ struct sii8620 { u8 xstat[MHL_XDS_SIZE]; u8 devcap[MHL_DCAP_SIZE]; u8 xdevcap[MHL_XDC_SIZE]; - u8 avif[HDMI_INFOFRAME_SIZE(AVI)]; bool feature_complete; bool devcap_read; bool sink_detected; @@ -1082,18 +1080,28 @@ static ssize_t mhl3_infoframe_pack(struct mhl3_infoframe *frame, return frm_len; } -static void sii8620_set_infoframes(struct sii8620 *ctx) +static void sii8620_set_infoframes(struct sii8620 *ctx, + struct drm_display_mode *mode) { struct mhl3_infoframe mhl_frm; union hdmi_infoframe frm; u8 buf[31]; int ret; + ret = drm_hdmi_avi_infoframe_from_display_mode(&frm.avi, + mode, + true); + if (ctx->use_packed_pixel) + frm.avi.colorspace = HDMI_COLORSPACE_YUV422; + + if (!ret) + ret = hdmi_avi_infoframe_pack(&frm.avi, buf, ARRAY_SIZE(buf)); + if (ret > 0) + sii8620_write_buf(ctx, REG_TPI_AVI_CHSUM, buf + 3, ret - 3); + if (!sii8620_is_mhl3(ctx) || !ctx->use_packed_pixel) { sii8620_write(ctx, REG_TPI_SC, BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI); - sii8620_write_buf(ctx, REG_TPI_AVI_CHSUM, ctx->avif + 3, - ARRAY_SIZE(ctx->avif) - 3); sii8620_write(ctx, REG_PKT_FILTER_0, BIT_PKT_FILTER_0_DROP_CEA_GAMUT_PKT | BIT_PKT_FILTER_0_DROP_MPEG_PKT | @@ -1102,16 +1110,6 @@ static void sii8620_set_infoframes(struct sii8620 *ctx) return; } - ret = hdmi_avi_infoframe_init(&frm.avi); - frm.avi.colorspace = HDMI_COLORSPACE_YUV422; - frm.avi.active_aspect = HDMI_ACTIVE_ASPECT_PICTURE; - frm.avi.picture_aspect = HDMI_PICTURE_ASPECT_16_9; - frm.avi.colorimetry = HDMI_COLORIMETRY_ITU_709; - frm.avi.video_code = ctx->video_code; - if (!ret) - ret = hdmi_avi_infoframe_pack(&frm.avi, buf, ARRAY_SIZE(buf)); - if (ret > 0) - sii8620_write_buf(ctx, REG_TPI_AVI_CHSUM, buf + 3, ret - 3); sii8620_write(ctx, REG_PKT_FILTER_0, BIT_PKT_FILTER_0_DROP_CEA_GAMUT_PKT | BIT_PKT_FILTER_0_DROP_MPEG_PKT | @@ -1131,6 +1129,9 @@ static void sii8620_set_infoframes(struct sii8620 *ctx) static void sii8620_start_video(struct sii8620 *ctx) { + struct drm_display_mode *mode = + &ctx->bridge.encoder->crtc->state->adjusted_mode; + if (!sii8620_is_mhl3(ctx)) sii8620_stop_video(ctx); @@ -1167,7 +1168,7 @@ static void sii8620_start_video(struct sii8620 *ctx) MHL_XDS_LINK_RATE_6_0_GBPS, 0x40 }, }; u8 p0_ctrl = BIT_M3_P0CTRL_MHL3_P0_PORT_EN; - int clk = ctx->pixel_clock * (ctx->use_packed_pixel ? 2 : 3); + int clk = mode->clock * (ctx->use_packed_pixel ? 2 : 3); int i; for (i = 0; i < ARRAY_SIZE(clk_spec) - 1; ++i) @@ -1196,7 +1197,7 @@ static void sii8620_start_video(struct sii8620 *ctx) clk_spec[i].link_rate); } - sii8620_set_infoframes(ctx); + sii8620_set_infoframes(ctx, mode); } static void sii8620_disable_hpd(struct sii8620 *ctx) @@ -2242,8 +2243,6 @@ static bool sii8620_mode_fixup(struct drm_bridge *bridge, mutex_lock(&ctx->lock); ctx->use_packed_pixel = sii8620_is_packing_required(ctx, adjusted_mode); - ctx->video_code = drm_match_cea_mode(adjusted_mode); - ctx->pixel_clock = adjusted_mode->clock; mutex_unlock(&ctx->lock); -- cgit v1.2.3 From fdddc65ab35d575b42aab411b2dc687601eab680 Mon Sep 17 00:00:00 2001 From: Maciej Purski Date: Thu, 28 Jun 2018 18:44:02 +0200 Subject: drm/bridge/sii8620: Fix display of packed pixel modes Current implementation does not guarantee packed pixel modes working with every dongle. There are some dongles, which require selecting the output mode explicitly. Write proper values to registers in packed_pixel mode, based on how it is done in vendor's code. Select output color space: RGB (no packed pixel) or YCBCR422 (packed pixel). This reverts commit e8b92efa629dac0e70ea4145c5e70616de5f89c8 ("drm/bridge/sii8620: fix display of packed pixel modes in MHL2"). Signed-off-by: Maciej Purski Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-3-git-send-email-m.purski@samsung.com --- drivers/gpu/drm/bridge/sil-sii8620.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c index bd30ccf3d195..16fe7ea9d90c 100644 --- a/drivers/gpu/drm/bridge/sil-sii8620.c +++ b/drivers/gpu/drm/bridge/sil-sii8620.c @@ -1015,21 +1015,36 @@ static void sii8620_stop_video(struct sii8620 *ctx) static void sii8620_set_format(struct sii8620 *ctx) { + u8 out_fmt; + if (sii8620_is_mhl3(ctx)) { sii8620_setbits(ctx, REG_M3_P0CTRL, BIT_M3_P0CTRL_MHL3_P0_PIXEL_MODE_PACKED, ctx->use_packed_pixel ? ~0 : 0); } else { + if (ctx->use_packed_pixel) { + sii8620_write_seq_static(ctx, + REG_VID_MODE, BIT_VID_MODE_M1080P, + REG_MHL_TOP_CTL, BIT_MHL_TOP_CTL_MHL_PP_SEL | 1, + REG_MHLTX_CTL6, 0x60 + ); + } else { sii8620_write_seq_static(ctx, REG_VID_MODE, 0, REG_MHL_TOP_CTL, 1, REG_MHLTX_CTL6, 0xa0 ); + } } + if (ctx->use_packed_pixel) + out_fmt = VAL_TPI_FORMAT(YCBCR422, FULL); + else + out_fmt = VAL_TPI_FORMAT(RGB, FULL); + sii8620_write_seq(ctx, REG_TPI_INPUT, VAL_TPI_FORMAT(RGB, FULL), - REG_TPI_OUTPUT, VAL_TPI_FORMAT(RGB, FULL), + REG_TPI_OUTPUT, out_fmt, ); } -- cgit v1.2.3 From 44f9a4b0dc7563669772198e5b226cab58a00167 Mon Sep 17 00:00:00 2001 From: Maciej Purski Date: Thu, 28 Jun 2018 18:44:03 +0200 Subject: drm/bridge/sii8620: Fix link mode selection Current link mode values do not allow to enable packed pixel modes. Select packed pixel clock mode, if needed, every time the link mode register gets updated. Signed-off-by: Maciej Purski Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-4-git-send-email-m.purski@samsung.com --- drivers/gpu/drm/bridge/sil-sii8620.c | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c index 16fe7ea9d90c..a6e8f4591e63 100644 --- a/drivers/gpu/drm/bridge/sil-sii8620.c +++ b/drivers/gpu/drm/bridge/sil-sii8620.c @@ -1165,8 +1165,14 @@ static void sii8620_start_video(struct sii8620 *ctx) sii8620_set_format(ctx); if (!sii8620_is_mhl3(ctx)) { - sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE), - MHL_DST_LM_CLK_MODE_NORMAL | MHL_DST_LM_PATH_ENABLED); + u8 link_mode = MHL_DST_LM_PATH_ENABLED; + + if (ctx->use_packed_pixel) + link_mode |= MHL_DST_LM_CLK_MODE_PACKED_PIXEL; + else + link_mode |= MHL_DST_LM_CLK_MODE_NORMAL; + + sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE), link_mode); sii8620_set_auto_zone(ctx); } else { static const struct { @@ -1677,14 +1683,18 @@ static void sii8620_status_dcap_ready(struct sii8620 *ctx) static void sii8620_status_changed_path(struct sii8620 *ctx) { - if (ctx->stat[MHL_DST_LINK_MODE] & MHL_DST_LM_PATH_ENABLED) { - sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE), - MHL_DST_LM_CLK_MODE_NORMAL - | MHL_DST_LM_PATH_ENABLED); - } else { - sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE), - MHL_DST_LM_CLK_MODE_NORMAL); - } + u8 link_mode; + + if (ctx->use_packed_pixel) + link_mode = MHL_DST_LM_CLK_MODE_PACKED_PIXEL; + else + link_mode = MHL_DST_LM_CLK_MODE_NORMAL; + + if (ctx->stat[MHL_DST_LINK_MODE] & MHL_DST_LM_PATH_ENABLED) + link_mode |= MHL_DST_LM_PATH_ENABLED; + + sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE), + link_mode); } static void sii8620_msc_mr_write_stat(struct sii8620 *ctx) -- cgit v1.2.3 From 38fc4248677552ce35efc09902fdcb06b61d7ef9 Mon Sep 17 00:00:00 2001 From: Paul Kocialkowski Date: Mon, 2 Jul 2018 11:16:59 +0200 Subject: arm64: Use aarch64elf and aarch64elfb emulation mode variants The aarch64linux and aarch64linuxb emulation modes are not supported by bare-metal toolchains and Linux using them forbids building the kernel with these toolchains. Since there is apparently no reason to target these emulation modes, the more generic elf modes are used instead, allowing to build on bare-metal toolchains as well as the already-supported ones. Fixes: 3d6a7b99e3fa ("arm64: ensure the kernel is compiled for LP64") Cc: stable@vger.kernel.org Acked-by: Will Deacon Signed-off-by: Paul Kocialkowski Signed-off-by: Catalin Marinas --- arch/arm64/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 45272266dafb..27389adf511a 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -61,14 +61,14 @@ KBUILD_CPPFLAGS += -mbig-endian CHECKFLAGS += -D__AARCH64EB__ AS += -EB LD += -EB -LDFLAGS += -maarch64linuxb +LDFLAGS += -maarch64elfb UTS_MACHINE := aarch64_be else KBUILD_CPPFLAGS += -mlittle-endian CHECKFLAGS += -D__AARCH64EL__ AS += -EL LD += -EL -LDFLAGS += -maarch64linux +LDFLAGS += -maarch64elf UTS_MACHINE := aarch64 endif -- cgit v1.2.3 From d7ef4899d7182f9d4267b4e4a5cc3689c1a04f25 Mon Sep 17 00:00:00 2001 From: Souptick Joarder Date: Wed, 4 Jul 2018 21:00:14 +0530 Subject: sample/vfio-mdev: Change return type to vm_fault_t convert mbochs_region_vm_fault and mbochs_dmabuf_vm_fault to return vm_fault_t type. Signed-off-by: Souptick Joarder Signed-off-by: Alex Williamson --- samples/vfio-mdev/mbochs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/samples/vfio-mdev/mbochs.c b/samples/vfio-mdev/mbochs.c index 85ac6037696f..d5d5a499160c 100644 --- a/samples/vfio-mdev/mbochs.c +++ b/samples/vfio-mdev/mbochs.c @@ -657,7 +657,7 @@ static void mbochs_put_pages(struct mdev_state *mdev_state) dev_dbg(dev, "%s: %d pages released\n", __func__, count); } -static int mbochs_region_vm_fault(struct vm_fault *vmf) +static vm_fault_t mbochs_region_vm_fault(struct vm_fault *vmf) { struct vm_area_struct *vma = vmf->vma; struct mdev_state *mdev_state = vma->vm_private_data; @@ -695,7 +695,7 @@ static int mbochs_mmap(struct mdev_device *mdev, struct vm_area_struct *vma) return 0; } -static int mbochs_dmabuf_vm_fault(struct vm_fault *vmf) +static vm_fault_t mbochs_dmabuf_vm_fault(struct vm_fault *vmf) { struct vm_area_struct *vma = vmf->vma; struct mbochs_dmabuf *dmabuf = vma->vm_private_data; -- cgit v1.2.3 From d5fad48cfb4b183d87960904c177eeeb9412b929 Mon Sep 17 00:00:00 2001 From: Zong Li Date: Mon, 25 Jun 2018 16:49:37 +0800 Subject: RISC-V: Add conditional macro for zone of DMA32 The DMA32 is for 64-bit usage. Signed-off-by: Zong Li Reviewed-by: Christoph Hellwig Signed-off-by: Palmer Dabbelt --- arch/riscv/mm/init.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index c77df8142be2..58a522f9bcc3 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -28,7 +28,9 @@ static void __init zone_sizes_init(void) { unsigned long max_zone_pfns[MAX_NR_ZONES] = { 0, }; +#ifdef CONFIG_ZONE_DMA32 max_zone_pfns[ZONE_DMA32] = PFN_DOWN(min(4UL * SZ_1G, max_low_pfn)); +#endif max_zone_pfns[ZONE_NORMAL] = max_low_pfn; free_area_init_nodes(max_zone_pfns); -- cgit v1.2.3 From 8f79125d285d2d71ed110e875754942256efa51d Mon Sep 17 00:00:00 2001 From: Zong Li Date: Mon, 25 Jun 2018 16:49:38 +0800 Subject: RISC-V: Select GENERIC_UCMPDI2 on RV32I On 32-bit, it need to use __ucmpdi2, otherwise, it can't find the __ucmpdi2 symbol. Signed-off-by: Zong Li Reviewed-by: Christoph Hellwig Signed-off-by: Palmer Dabbelt --- arch/riscv/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index f12680c9b947..4764fdeb4f1f 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -107,6 +107,7 @@ config ARCH_RV32I select GENERIC_LIB_ASHLDI3 select GENERIC_LIB_ASHRDI3 select GENERIC_LIB_LSHRDI3 + select GENERIC_LIB_UCMPDI2 config ARCH_RV64I bool "RV64I" -- cgit v1.2.3 From c480d8911fda96a0f37634bd4dc4e2c8a87c38da Mon Sep 17 00:00:00 2001 From: Zong Li Date: Mon, 25 Jun 2018 16:49:39 +0800 Subject: RISC-V: Add definiion of extract symbol's index and type for 32-bit Use generic marco to get the index and type of symbol. Signed-off-by: Zong Li Signed-off-by: Palmer Dabbelt --- arch/riscv/include/uapi/asm/elf.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/riscv/include/uapi/asm/elf.h b/arch/riscv/include/uapi/asm/elf.h index 5cae4c30cd8e..1e0dfc36aab9 100644 --- a/arch/riscv/include/uapi/asm/elf.h +++ b/arch/riscv/include/uapi/asm/elf.h @@ -21,8 +21,13 @@ typedef struct user_regs_struct elf_gregset_t; typedef union __riscv_fp_state elf_fpregset_t; -#define ELF_RISCV_R_SYM(r_info) ((r_info) >> 32) -#define ELF_RISCV_R_TYPE(r_info) ((r_info) & 0xffffffff) +#if __riscv_xlen == 64 +#define ELF_RISCV_R_SYM(r_info) ELF64_R_SYM(r_info) +#define ELF_RISCV_R_TYPE(r_info) ELF64_R_TYPE(r_info) +#else +#define ELF_RISCV_R_SYM(r_info) ELF32_R_SYM(r_info) +#define ELF_RISCV_R_TYPE(r_info) ELF32_R_TYPE(r_info) +#endif /* * RISC-V relocation types -- cgit v1.2.3 From 7df85002178e708aa749c63020fd333d9f085ced Mon Sep 17 00:00:00 2001 From: Zong Li Date: Mon, 25 Jun 2018 16:49:40 +0800 Subject: RISC-V: Change variable type for 32-bit compatible Signed-off-by: Zong Li Reviewed-by: Christoph Hellwig Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/module.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/riscv/kernel/module.c b/arch/riscv/kernel/module.c index 1d5e9b934b8c..e8c6aaa2aab4 100644 --- a/arch/riscv/kernel/module.c +++ b/arch/riscv/kernel/module.c @@ -37,7 +37,7 @@ static int apply_r_riscv_64_rela(struct module *me, u32 *location, Elf_Addr v) static int apply_r_riscv_branch_rela(struct module *me, u32 *location, Elf_Addr v) { - s64 offset = (void *)v - (void *)location; + ptrdiff_t offset = (void *)v - (void *)location; u32 imm12 = (offset & 0x1000) << (31 - 12); u32 imm11 = (offset & 0x800) >> (11 - 7); u32 imm10_5 = (offset & 0x7e0) << (30 - 10); @@ -50,7 +50,7 @@ static int apply_r_riscv_branch_rela(struct module *me, u32 *location, static int apply_r_riscv_jal_rela(struct module *me, u32 *location, Elf_Addr v) { - s64 offset = (void *)v - (void *)location; + ptrdiff_t offset = (void *)v - (void *)location; u32 imm20 = (offset & 0x100000) << (31 - 20); u32 imm19_12 = (offset & 0xff000); u32 imm11 = (offset & 0x800) << (20 - 11); @@ -63,7 +63,7 @@ static int apply_r_riscv_jal_rela(struct module *me, u32 *location, static int apply_r_riscv_rcv_branch_rela(struct module *me, u32 *location, Elf_Addr v) { - s64 offset = (void *)v - (void *)location; + ptrdiff_t offset = (void *)v - (void *)location; u16 imm8 = (offset & 0x100) << (12 - 8); u16 imm7_6 = (offset & 0xc0) >> (6 - 5); u16 imm5 = (offset & 0x20) >> (5 - 2); @@ -78,7 +78,7 @@ static int apply_r_riscv_rcv_branch_rela(struct module *me, u32 *location, static int apply_r_riscv_rvc_jump_rela(struct module *me, u32 *location, Elf_Addr v) { - s64 offset = (void *)v - (void *)location; + ptrdiff_t offset = (void *)v - (void *)location; u16 imm11 = (offset & 0x800) << (12 - 11); u16 imm10 = (offset & 0x400) >> (10 - 8); u16 imm9_8 = (offset & 0x300) << (12 - 11); @@ -96,7 +96,7 @@ static int apply_r_riscv_rvc_jump_rela(struct module *me, u32 *location, static int apply_r_riscv_pcrel_hi20_rela(struct module *me, u32 *location, Elf_Addr v) { - s64 offset = (void *)v - (void *)location; + ptrdiff_t offset = (void *)v - (void *)location; s32 hi20; if (offset != (s32)offset) { @@ -178,7 +178,7 @@ static int apply_r_riscv_lo12_s_rela(struct module *me, u32 *location, static int apply_r_riscv_got_hi20_rela(struct module *me, u32 *location, Elf_Addr v) { - s64 offset = (void *)v - (void *)location; + ptrdiff_t offset = (void *)v - (void *)location; s32 hi20; /* Always emit the got entry */ @@ -200,7 +200,7 @@ static int apply_r_riscv_got_hi20_rela(struct module *me, u32 *location, static int apply_r_riscv_call_plt_rela(struct module *me, u32 *location, Elf_Addr v) { - s64 offset = (void *)v - (void *)location; + ptrdiff_t offset = (void *)v - (void *)location; s32 fill_v = offset; u32 hi20, lo12; @@ -227,7 +227,7 @@ static int apply_r_riscv_call_plt_rela(struct module *me, u32 *location, static int apply_r_riscv_call_rela(struct module *me, u32 *location, Elf_Addr v) { - s64 offset = (void *)v - (void *)location; + ptrdiff_t offset = (void *)v - (void *)location; s32 fill_v = offset; u32 hi20, lo12; @@ -347,7 +347,7 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab, unsigned int j; for (j = 0; j < sechdrs[relsec].sh_size / sizeof(*rel); j++) { - u64 hi20_loc = + unsigned long hi20_loc = sechdrs[sechdrs[relsec].sh_info].sh_addr + rel[j].r_offset; u32 hi20_type = ELF_RISCV_R_TYPE(rel[j].r_info); @@ -360,12 +360,12 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab, Elf_Sym *hi20_sym = (Elf_Sym *)sechdrs[symindex].sh_addr + ELF_RISCV_R_SYM(rel[j].r_info); - u64 hi20_sym_val = + unsigned long hi20_sym_val = hi20_sym->st_value + rel[j].r_addend; /* Calculate lo12 */ - u64 offset = hi20_sym_val - hi20_loc; + size_t offset = hi20_sym_val - hi20_loc; if (IS_ENABLED(CONFIG_MODULE_SECTIONS) && hi20_type == R_RISCV_GOT_HI20) { offset = module_emit_got_entry( -- cgit v1.2.3 From 781c8fe2da3d2c7c95cd7ffddbab63b80a79da4d Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Tue, 12 Jun 2018 19:26:36 +0200 Subject: RISC-V: fix R_RISCV_ADD32/R_RISCV_SUB32 relocations The R_RISCV_ADD32/R_RISCV_SUB32 relocations should add/subtract the address of the symbol (without overflow check), not its contents. Signed-off-by: Andreas Schwab Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/module.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/riscv/kernel/module.c b/arch/riscv/kernel/module.c index 1d5e9b934b8c..6bb48315c973 100644 --- a/arch/riscv/kernel/module.c +++ b/arch/riscv/kernel/module.c @@ -263,14 +263,14 @@ static int apply_r_riscv_align_rela(struct module *me, u32 *location, static int apply_r_riscv_add32_rela(struct module *me, u32 *location, Elf_Addr v) { - *(u32 *)location += (*(u32 *)v); + *(u32 *)location += (u32)v; return 0; } static int apply_r_riscv_sub32_rela(struct module *me, u32 *location, Elf_Addr v) { - *(u32 *)location -= (*(u32 *)v); + *(u32 *)location -= (u32)v; return 0; } -- cgit v1.2.3 From f67f10b8a6c96ab6c1d6946d269e2ca5f9998cc2 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 19 Jun 2018 15:41:34 -0600 Subject: riscv: remove unnecessary of_platform_populate call The DT core will call of_platform_default_populate, so it is not necessary for arch specific code to call it unless there are custom match entries, auxdata or parent device. Neither of those apply here, so remove the call. Cc: Palmer Dabbelt Cc: Albert Ou Cc: linux-riscv@lists.infradead.org Signed-off-by: Rob Herring Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/setup.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c index ee44a48faf79..f0d2070866d4 100644 --- a/arch/riscv/kernel/setup.c +++ b/arch/riscv/kernel/setup.c @@ -220,8 +220,3 @@ void __init setup_arch(char **cmdline_p) riscv_fill_hwcap(); } -static int __init riscv_device_init(void) -{ - return of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} -subsys_initcall_sync(riscv_device_init); -- cgit v1.2.3 From 8606544890d7dc4f7a740963f70dc1e1d54f8e30 Mon Sep 17 00:00:00 2001 From: Palmer Dabbelt Date: Fri, 22 Jun 2018 15:46:28 -0700 Subject: RISC-V: Don't include irq-riscv-intc.h This file has never existed in the upstream kernel, but it's guarded by an #ifdef that's also never existed in the upstream kernel. As a part of our interrupt controller refactoring this header is no longer necessary, but this reference managed to sneak in anyway. Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/irq.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c index b74cbfbce2d0..7bcdaed15703 100644 --- a/arch/riscv/kernel/irq.c +++ b/arch/riscv/kernel/irq.c @@ -16,10 +16,6 @@ #include #include -#ifdef CONFIG_RISCV_INTC -#include -#endif - void __init init_IRQ(void) { irqchip_init(); -- cgit v1.2.3 From 1db9b80980d26fe95c942e0bb8bde2ca715029ad Mon Sep 17 00:00:00 2001 From: Jim Wilson Date: Mon, 11 Jun 2018 14:48:22 -0700 Subject: RISC-V: Fix PTRACE_SETREGSET bug. In riscv_gpr_set, pass regs instead of ®s to user_regset_copyin to fix gdb segfault. Signed-off-by: Jim Wilson Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/ptrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/kernel/ptrace.c b/arch/riscv/kernel/ptrace.c index ba3e80712797..9f82a7e34c64 100644 --- a/arch/riscv/kernel/ptrace.c +++ b/arch/riscv/kernel/ptrace.c @@ -50,7 +50,7 @@ static int riscv_gpr_set(struct task_struct *target, struct pt_regs *regs; regs = task_pt_regs(target); - ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, ®s, 0, -1); + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, regs, 0, -1); return ret; } -- cgit v1.2.3 From 2893af07e507e993ad71ca6d66a7b02be741571c Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 3 Jul 2018 10:22:00 +0900 Subject: arm64: add endianness option to LDFLAGS instead of LD With the recent syntax extension, Kconfig is now able to evaluate the compiler / toolchain capability. However, accumulating flags to 'LD' is not compatible with the way it works; 'LD' must be passed to Kconfig to call $(ld-option,...) from Kconfig files. If you tweak 'LD' in arch Makefile depending on CONFIG_CPU_BIG_ENDIAN, this would end up with circular dependency between Makefile and Kconfig. Acked-by: Will Deacon Signed-off-by: Masahiro Yamada Signed-off-by: Catalin Marinas --- arch/arm64/Makefile | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 27389adf511a..48158c550110 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -60,15 +60,13 @@ ifeq ($(CONFIG_CPU_BIG_ENDIAN), y) KBUILD_CPPFLAGS += -mbig-endian CHECKFLAGS += -D__AARCH64EB__ AS += -EB -LD += -EB -LDFLAGS += -maarch64elfb +LDFLAGS += -EB -maarch64elfb UTS_MACHINE := aarch64_be else KBUILD_CPPFLAGS += -mlittle-endian CHECKFLAGS += -D__AARCH64EL__ AS += -EL -LD += -EL -LDFLAGS += -maarch64elf +LDFLAGS += -EL -maarch64elf UTS_MACHINE := aarch64 endif -- cgit v1.2.3 From df8ed346d4a806a6eef2db5924285e839604b3f9 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Tue, 3 Jul 2018 22:34:54 +0200 Subject: net: phy: fix flag masking in __set_phy_supported Currently also the pause flags are removed from phydev->supported because they're not included in PHY_DEFAULT_FEATURES. I don't think this is intended, especially when considering that this function can be called via phy_set_max_speed() anywhere in a driver. Change the masking to mask out only the values we're going to change. In addition remove the misleading comment, job of this small function is just to adjust the supported and advertised speeds. Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper") Signed-off-by: Heiner Kallweit Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index bd0f339f69fd..b9f5f40a7ac1 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1724,11 +1724,8 @@ EXPORT_SYMBOL(genphy_loopback); static int __set_phy_supported(struct phy_device *phydev, u32 max_speed) { - /* The default values for phydev->supported are provided by the PHY - * driver "features" member, we want to reset to sane defaults first - * before supporting higher speeds. - */ - phydev->supported &= PHY_DEFAULT_FEATURES; + phydev->supported &= ~(PHY_1000BT_FEATURES | PHY_100BT_FEATURES | + PHY_10BT_FEATURES); switch (max_speed) { default: -- cgit v1.2.3 From 5e7ba042fd05043416babace5a4a953e29cf2826 Mon Sep 17 00:00:00 2001 From: Denis Bolotin Date: Wed, 4 Jul 2018 17:06:46 +0300 Subject: qed: Fix reading stale configuration information Configuration information read at driver load can become stale after it is updated. Mark information as not valid and re-populate when this happens. Signed-off-by: Denis Bolotin Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed.h | 1 + drivers/net/ethernet/qlogic/qed/qed_mcp.c | 39 +++++++++++++++++++++---------- 2 files changed, 28 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed.h b/drivers/net/ethernet/qlogic/qed/qed.h index 00db3401b898..1dfaccd151f0 100644 --- a/drivers/net/ethernet/qlogic/qed/qed.h +++ b/drivers/net/ethernet/qlogic/qed/qed.h @@ -502,6 +502,7 @@ enum BAR_ID { struct qed_nvm_image_info { u32 num_images; struct bist_nvm_image_att *image_att; + bool valid; }; #define DRV_MODULE_VERSION \ diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index 4e0b443c9519..9d9e533bccdc 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -592,6 +592,9 @@ int qed_mcp_nvm_wr_cmd(struct qed_hwfn *p_hwfn, *o_mcp_resp = mb_params.mcp_resp; *o_mcp_param = mb_params.mcp_param; + /* nvm_info needs to be updated */ + p_hwfn->nvm_info.valid = false; + return 0; } @@ -2555,11 +2558,14 @@ int qed_mcp_bist_nvm_get_image_att(struct qed_hwfn *p_hwfn, int qed_mcp_nvm_info_populate(struct qed_hwfn *p_hwfn) { - struct qed_nvm_image_info *nvm_info = &p_hwfn->nvm_info; + struct qed_nvm_image_info nvm_info; struct qed_ptt *p_ptt; int rc; u32 i; + if (p_hwfn->nvm_info.valid) + return 0; + p_ptt = qed_ptt_acquire(p_hwfn); if (!p_ptt) { DP_ERR(p_hwfn, "failed to acquire ptt\n"); @@ -2567,29 +2573,29 @@ int qed_mcp_nvm_info_populate(struct qed_hwfn *p_hwfn) } /* Acquire from MFW the amount of available images */ - nvm_info->num_images = 0; + nvm_info.num_images = 0; rc = qed_mcp_bist_nvm_get_num_images(p_hwfn, - p_ptt, &nvm_info->num_images); + p_ptt, &nvm_info.num_images); if (rc == -EOPNOTSUPP) { DP_INFO(p_hwfn, "DRV_MSG_CODE_BIST_TEST is not supported\n"); goto out; - } else if (rc || !nvm_info->num_images) { + } else if (rc || !nvm_info.num_images) { DP_ERR(p_hwfn, "Failed getting number of images\n"); goto err0; } - nvm_info->image_att = kmalloc_array(nvm_info->num_images, - sizeof(struct bist_nvm_image_att), - GFP_KERNEL); - if (!nvm_info->image_att) { + nvm_info.image_att = kmalloc_array(nvm_info.num_images, + sizeof(struct bist_nvm_image_att), + GFP_KERNEL); + if (!nvm_info.image_att) { rc = -ENOMEM; goto err0; } /* Iterate over images and get their attributes */ - for (i = 0; i < nvm_info->num_images; i++) { + for (i = 0; i < nvm_info.num_images; i++) { rc = qed_mcp_bist_nvm_get_image_att(p_hwfn, p_ptt, - &nvm_info->image_att[i], i); + &nvm_info.image_att[i], i); if (rc) { DP_ERR(p_hwfn, "Failed getting image index %d attributes\n", i); @@ -2597,14 +2603,22 @@ int qed_mcp_nvm_info_populate(struct qed_hwfn *p_hwfn) } DP_VERBOSE(p_hwfn, QED_MSG_SP, "image index %d, size %x\n", i, - nvm_info->image_att[i].len); + nvm_info.image_att[i].len); } out: + /* Update hwfn's nvm_info */ + if (nvm_info.num_images) { + p_hwfn->nvm_info.num_images = nvm_info.num_images; + kfree(p_hwfn->nvm_info.image_att); + p_hwfn->nvm_info.image_att = nvm_info.image_att; + p_hwfn->nvm_info.valid = true; + } + qed_ptt_release(p_hwfn, p_ptt); return 0; err1: - kfree(nvm_info->image_att); + kfree(nvm_info.image_att); err0: qed_ptt_release(p_hwfn, p_ptt); return rc; @@ -2641,6 +2655,7 @@ qed_mcp_get_nvm_image_att(struct qed_hwfn *p_hwfn, return -EINVAL; } + qed_mcp_nvm_info_populate(p_hwfn); for (i = 0; i < p_hwfn->nvm_info.num_images; i++) if (type == p_hwfn->nvm_info.image_att[i].image_type) break; -- cgit v1.2.3 From 99ec9e77511dea55d81729fc80b6c63a61bfa8e0 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sun, 3 Jun 2018 16:40:54 +0200 Subject: drm/udl: fix display corruption of the last line The displaylink hardware has such a peculiarity that it doesn't render a command until next command is received. This produces occasional corruption, such as when setting 22x11 font on the console, only the first line of the cursor will be blinking if the cursor is located at some specific columns. When we end up with a repeating pixel, the driver has a bug that it leaves one uninitialized byte after the command (and this byte is enough to flush the command and render it - thus it fixes the screen corruption), however whe we end up with a non-repeating pixel, there is no byte appended and this results in temporary screen corruption. This patch fixes the screen corruption by always appending a byte 0xAF at the end of URB. It also removes the uninitialized byte. Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/udl/udl_fb.c | 5 ++++- drivers/gpu/drm/udl/udl_transfer.c | 11 +++++++---- 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/udl/udl_fb.c b/drivers/gpu/drm/udl/udl_fb.c index 2ebdc6d5a76e..d5583190f3e4 100644 --- a/drivers/gpu/drm/udl/udl_fb.c +++ b/drivers/gpu/drm/udl/udl_fb.c @@ -137,7 +137,10 @@ int udl_handle_damage(struct udl_framebuffer *fb, int x, int y, if (cmd > (char *) urb->transfer_buffer) { /* Send partial buffer remaining before exiting */ - int len = cmd - (char *) urb->transfer_buffer; + int len; + if (cmd < (char *) urb->transfer_buffer + urb->transfer_buffer_length) + *cmd++ = 0xAF; + len = cmd - (char *) urb->transfer_buffer; ret = udl_submit_urb(dev, urb, len); bytes_sent += len; } else diff --git a/drivers/gpu/drm/udl/udl_transfer.c b/drivers/gpu/drm/udl/udl_transfer.c index 0c87b1ac6b68..b992644c17e6 100644 --- a/drivers/gpu/drm/udl/udl_transfer.c +++ b/drivers/gpu/drm/udl/udl_transfer.c @@ -153,11 +153,11 @@ static void udl_compress_hline16( raw_pixels_count_byte = cmd++; /* we'll know this later */ raw_pixel_start = pixel; - cmd_pixel_end = pixel + (min(MAX_CMD_PIXELS + 1, - min((int)(pixel_end - pixel) / bpp, - (int)(cmd_buffer_end - cmd) / 2))) * bpp; + cmd_pixel_end = pixel + min3(MAX_CMD_PIXELS + 1UL, + (unsigned long)(pixel_end - pixel) / bpp, + (unsigned long)(cmd_buffer_end - 1 - cmd) / 2) * bpp; - prefetch_range((void *) pixel, (cmd_pixel_end - pixel) * bpp); + prefetch_range((void *) pixel, cmd_pixel_end - pixel); pixel_val16 = get_pixel_val16(pixel, bpp); while (pixel < cmd_pixel_end) { @@ -193,6 +193,9 @@ static void udl_compress_hline16( if (pixel > raw_pixel_start) { /* finalize last RAW span */ *raw_pixels_count_byte = ((pixel-raw_pixel_start) / bpp) & 0xFF; + } else { + /* undo unused byte */ + cmd--; } *cmd_pixels_count_byte = ((pixel - cmd_pixel_start) / bpp) & 0xFF; -- cgit v1.2.3 From 6cef21a1964933b77c855c55bac2723053cc676d Mon Sep 17 00:00:00 2001 From: Hang Yuan Date: Tue, 3 Jul 2018 17:31:17 +0800 Subject: drm/i915/gvt: update vreg on inhibit context lri command Commit cd7e 61b9"init mmio by lri command in vgpu inhibit context" initializes registers saved/restored in context with its vreg value through lri command in ring buffer. It relies on vreg got updated on every guest access. There is a case found that Linux guest uses lri command in inhibit-ctx to update the register. This patch adds vreg update on this case. v2: move mmio_attribute functions to gvt.h (Zhenyu) v3: use mask_mmio_write in vreg update v4: refine codes and add more comments (Zhenyu) Fixes: cd7e61b9("drm/i915/gvt: init mmio by lri command in vgpu inhibit context") Signed-off-by: Hang Yuan Signed-off-by: Weinan Li Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/cmd_parser.c | 23 +++++++++++++++++++++++ drivers/gpu/drm/i915/gvt/gvt.h | 29 +++++++++++++++++++++++++++++ drivers/gpu/drm/i915/gvt/handlers.c | 24 ++++++++++++++++++++++++ drivers/gpu/drm/i915/gvt/mmio.h | 2 ++ drivers/gpu/drm/i915/gvt/mmio_context.c | 4 +++- 5 files changed, 81 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/gvt/cmd_parser.c b/drivers/gpu/drm/i915/gvt/cmd_parser.c index b51c05d03f14..7f562410f9cf 100644 --- a/drivers/gpu/drm/i915/gvt/cmd_parser.c +++ b/drivers/gpu/drm/i915/gvt/cmd_parser.c @@ -862,6 +862,7 @@ static int cmd_reg_handler(struct parser_exec_state *s, { struct intel_vgpu *vgpu = s->vgpu; struct intel_gvt *gvt = vgpu->gvt; + u32 ctx_sr_ctl; if (offset + 4 > gvt->device_info.mmio_size) { gvt_vgpu_err("%s access to (%x) outside of MMIO range\n", @@ -894,6 +895,28 @@ static int cmd_reg_handler(struct parser_exec_state *s, patch_value(s, cmd_ptr(s, index), VGT_PVINFO_PAGE); } + /* TODO + * Right now only scan LRI command on KBL and in inhibit context. + * It's good enough to support initializing mmio by lri command in + * vgpu inhibit context on KBL. + */ + if (IS_KABYLAKE(s->vgpu->gvt->dev_priv) && + intel_gvt_mmio_is_in_ctx(gvt, offset) && + !strncmp(cmd, "lri", 3)) { + intel_gvt_hypervisor_read_gpa(s->vgpu, + s->workload->ring_context_gpa + 12, &ctx_sr_ctl, 4); + /* check inhibit context */ + if (ctx_sr_ctl & 1) { + u32 data = cmd_val(s, index + 1); + + if (intel_gvt_mmio_has_mode_mask(s->vgpu->gvt, offset)) + intel_vgpu_mask_mmio_write(vgpu, + offset, &data, 4); + else + vgpu_vreg(vgpu, offset) = data; + } + } + /* TODO: Update the global mask if this MMIO is a masked-MMIO */ intel_gvt_mmio_set_cmd_accessed(gvt, offset); return 0; diff --git a/drivers/gpu/drm/i915/gvt/gvt.h b/drivers/gpu/drm/i915/gvt/gvt.h index 05d15a095310..858967daf04b 100644 --- a/drivers/gpu/drm/i915/gvt/gvt.h +++ b/drivers/gpu/drm/i915/gvt/gvt.h @@ -268,6 +268,8 @@ struct intel_gvt_mmio { #define F_CMD_ACCESSED (1 << 5) /* This reg could be accessed by unaligned address */ #define F_UNALIGN (1 << 6) +/* This reg is saved/restored in context */ +#define F_IN_CTX (1 << 7) struct gvt_mmio_block *mmio_block; unsigned int num_mmio_block; @@ -639,6 +641,33 @@ static inline bool intel_gvt_mmio_has_mode_mask( return gvt->mmio.mmio_attribute[offset >> 2] & F_MODE_MASK; } +/** + * intel_gvt_mmio_is_in_ctx - check if a MMIO has in-ctx mask + * @gvt: a GVT device + * @offset: register offset + * + * Returns: + * True if a MMIO has a in-context mask, false if it isn't. + * + */ +static inline bool intel_gvt_mmio_is_in_ctx( + struct intel_gvt *gvt, unsigned int offset) +{ + return gvt->mmio.mmio_attribute[offset >> 2] & F_IN_CTX; +} + +/** + * intel_gvt_mmio_set_in_ctx - mask a MMIO in logical context + * @gvt: a GVT device + * @offset: register offset + * + */ +static inline void intel_gvt_mmio_set_in_ctx( + struct intel_gvt *gvt, unsigned int offset) +{ + gvt->mmio.mmio_attribute[offset >> 2] |= F_IN_CTX; +} + int intel_gvt_debugfs_add_vgpu(struct intel_vgpu *vgpu); void intel_gvt_debugfs_remove_vgpu(struct intel_vgpu *vgpu); int intel_gvt_debugfs_init(struct intel_gvt *gvt); diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c index bcbc47a88a70..8f1caacdc78a 100644 --- a/drivers/gpu/drm/i915/gvt/handlers.c +++ b/drivers/gpu/drm/i915/gvt/handlers.c @@ -3045,6 +3045,30 @@ int intel_vgpu_default_mmio_write(struct intel_vgpu *vgpu, unsigned int offset, return 0; } +/** + * intel_vgpu_mask_mmio_write - write mask register + * @vgpu: a vGPU + * @offset: access offset + * @p_data: write data buffer + * @bytes: access data length + * + * Returns: + * Zero on success, negative error code if failed. + */ +int intel_vgpu_mask_mmio_write(struct intel_vgpu *vgpu, unsigned int offset, + void *p_data, unsigned int bytes) +{ + u32 mask, old_vreg; + + old_vreg = vgpu_vreg(vgpu, offset); + write_vreg(vgpu, offset, p_data, bytes); + mask = vgpu_vreg(vgpu, offset) >> 16; + vgpu_vreg(vgpu, offset) = (old_vreg & ~mask) | + (vgpu_vreg(vgpu, offset) & mask); + + return 0; +} + /** * intel_gvt_in_force_nonpriv_whitelist - if a mmio is in whitelist to be * force-nopriv register diff --git a/drivers/gpu/drm/i915/gvt/mmio.h b/drivers/gpu/drm/i915/gvt/mmio.h index 71b620875943..dac8c6401e26 100644 --- a/drivers/gpu/drm/i915/gvt/mmio.h +++ b/drivers/gpu/drm/i915/gvt/mmio.h @@ -98,4 +98,6 @@ bool intel_gvt_in_force_nonpriv_whitelist(struct intel_gvt *gvt, int intel_vgpu_mmio_reg_rw(struct intel_vgpu *vgpu, unsigned int offset, void *pdata, unsigned int bytes, bool is_read); +int intel_vgpu_mask_mmio_write(struct intel_vgpu *vgpu, unsigned int offset, + void *p_data, unsigned int bytes); #endif diff --git a/drivers/gpu/drm/i915/gvt/mmio_context.c b/drivers/gpu/drm/i915/gvt/mmio_context.c index 0f949554d118..5ca9caf7552a 100644 --- a/drivers/gpu/drm/i915/gvt/mmio_context.c +++ b/drivers/gpu/drm/i915/gvt/mmio_context.c @@ -581,7 +581,9 @@ void intel_gvt_init_engine_mmio_context(struct intel_gvt *gvt) for (mmio = gvt->engine_mmio_list.mmio; i915_mmio_reg_valid(mmio->reg); mmio++) { - if (mmio->in_context) + if (mmio->in_context) { gvt->engine_mmio_list.ctx_mmio_count[mmio->ring_id]++; + intel_gvt_mmio_set_in_ctx(gvt, mmio->reg.reg); + } } } -- cgit v1.2.3 From 4d5d33a085335ef469c9a87792bcaaaa8e64d8c4 Mon Sep 17 00:00:00 2001 From: Taeung Song Date: Wed, 4 Jul 2018 22:36:36 +0900 Subject: samples/bpf: add missing This fixes build error regarding redefinition: CLANG-bpf samples/bpf/parse_varlen.o samples/bpf/parse_varlen.c:111:8: error: redefinition of 'vlan_hdr' struct vlan_hdr { ^ ./include/linux/if_vlan.h:38:8: note: previous definition is here So remove duplicate 'struct vlan_hdr' in sample code and include if_vlan.h Signed-off-by: Taeung Song Acked-by: David S. Miller Signed-off-by: Daniel Borkmann --- samples/bpf/parse_varlen.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/samples/bpf/parse_varlen.c b/samples/bpf/parse_varlen.c index 95c16324760c..0b6f22feb2c9 100644 --- a/samples/bpf/parse_varlen.c +++ b/samples/bpf/parse_varlen.c @@ -6,6 +6,7 @@ */ #define KBUILD_MODNAME "foo" #include +#include #include #include #include @@ -108,11 +109,6 @@ static int parse_ipv6(void *data, uint64_t nh_off, void *data_end) return 0; } -struct vlan_hdr { - uint16_t h_vlan_TCI; - uint16_t h_vlan_encapsulated_proto; -}; - SEC("varlen") int handle_ingress(struct __sk_buff *skb) { -- cgit v1.2.3 From 492b7e894587c151be681f86d4d1d086375f7b45 Mon Sep 17 00:00:00 2001 From: Taeung Song Date: Wed, 4 Jul 2018 22:36:37 +0900 Subject: samples/bpf: Check the result of system() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To avoid the below build warning message, use new generate_load() checking the return value. ignoring return value of ‘system’, declared with attribute warn_unused_result And it also refactors the duplicate code of both test_perf_event_all_cpu() and test_perf_event_task() Cc: Teng Qin Signed-off-by: Taeung Song Acked-by: David S. Miller Signed-off-by: Daniel Borkmann --- samples/bpf/trace_event_user.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/samples/bpf/trace_event_user.c b/samples/bpf/trace_event_user.c index 1fa1becfa641..d08046ab81f0 100644 --- a/samples/bpf/trace_event_user.c +++ b/samples/bpf/trace_event_user.c @@ -122,6 +122,16 @@ static void print_stacks(void) } } +static inline int generate_load(void) +{ + if (system("dd if=/dev/zero of=/dev/null count=5000k status=none") < 0) { + printf("failed to generate some load with dd: %s\n", strerror(errno)); + return -1; + } + + return 0; +} + static void test_perf_event_all_cpu(struct perf_event_attr *attr) { int nr_cpus = sysconf(_SC_NPROCESSORS_CONF); @@ -142,7 +152,11 @@ static void test_perf_event_all_cpu(struct perf_event_attr *attr) assert(ioctl(pmu_fd[i], PERF_EVENT_IOC_SET_BPF, prog_fd[0]) == 0); assert(ioctl(pmu_fd[i], PERF_EVENT_IOC_ENABLE) == 0); } - system("dd if=/dev/zero of=/dev/null count=5000k status=none"); + + if (generate_load() < 0) { + error = 1; + goto all_cpu_err; + } print_stacks(); all_cpu_err: for (i--; i >= 0; i--) { @@ -156,7 +170,7 @@ all_cpu_err: static void test_perf_event_task(struct perf_event_attr *attr) { - int pmu_fd; + int pmu_fd, error = 0; /* per task perf event, enable inherit so the "dd ..." command can be traced properly. * Enabling inherit will cause bpf_perf_prog_read_time helper failure. @@ -171,10 +185,17 @@ static void test_perf_event_task(struct perf_event_attr *attr) } assert(ioctl(pmu_fd, PERF_EVENT_IOC_SET_BPF, prog_fd[0]) == 0); assert(ioctl(pmu_fd, PERF_EVENT_IOC_ENABLE) == 0); - system("dd if=/dev/zero of=/dev/null count=5000k status=none"); + + if (generate_load() < 0) { + error = 1; + goto err; + } print_stacks(); +err: ioctl(pmu_fd, PERF_EVENT_IOC_DISABLE); close(pmu_fd); + if (error) + int_exit(0); } static void test_bpf_perf_event(void) -- cgit v1.2.3 From 02a2f000a3629274bfad60bfc4de9edec49e63e7 Mon Sep 17 00:00:00 2001 From: Taeung Song Date: Wed, 4 Jul 2018 22:36:38 +0900 Subject: samples/bpf: Check the error of write() and read() test_task_rename() and test_urandom_read() can be failed during write() and read(), So check the result of them. Reviewed-by: David Laight Signed-off-by: Taeung Song Acked-by: David S. Miller Signed-off-by: Daniel Borkmann --- samples/bpf/test_overhead_user.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/samples/bpf/test_overhead_user.c b/samples/bpf/test_overhead_user.c index 6caf47afa635..9d6dcaa9db92 100644 --- a/samples/bpf/test_overhead_user.c +++ b/samples/bpf/test_overhead_user.c @@ -6,6 +6,7 @@ */ #define _GNU_SOURCE #include +#include #include #include #include @@ -44,8 +45,13 @@ static void test_task_rename(int cpu) exit(1); } start_time = time_get_ns(); - for (i = 0; i < MAX_CNT; i++) - write(fd, buf, sizeof(buf)); + for (i = 0; i < MAX_CNT; i++) { + if (write(fd, buf, sizeof(buf)) < 0) { + printf("task rename failed: %s\n", strerror(errno)); + close(fd); + return; + } + } printf("task_rename:%d: %lld events per sec\n", cpu, MAX_CNT * 1000000000ll / (time_get_ns() - start_time)); close(fd); @@ -63,8 +69,13 @@ static void test_urandom_read(int cpu) exit(1); } start_time = time_get_ns(); - for (i = 0; i < MAX_CNT; i++) - read(fd, buf, sizeof(buf)); + for (i = 0; i < MAX_CNT; i++) { + if (read(fd, buf, sizeof(buf)) < 0) { + printf("failed to read from /dev/urandom: %s\n", strerror(errno)); + close(fd); + return; + } + } printf("urandom_read:%d: %lld events per sec\n", cpu, MAX_CNT * 1000000000ll / (time_get_ns() - start_time)); close(fd); -- cgit v1.2.3 From c48424d993fafd1e04b228fbd46176f828233d82 Mon Sep 17 00:00:00 2001 From: Taeung Song Date: Wed, 4 Jul 2018 22:36:39 +0900 Subject: samples/bpf: add .gitignore file For untracked executables of samples/bpf, add this. Untracked files: (use "git add ..." to include in what will be committed) samples/bpf/cpustat samples/bpf/fds_example samples/bpf/lathist samples/bpf/load_sock_ops ... Signed-off-by: Taeung Song Acked-by: David S. Miller Signed-off-by: Daniel Borkmann --- samples/bpf/.gitignore | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 samples/bpf/.gitignore diff --git a/samples/bpf/.gitignore b/samples/bpf/.gitignore new file mode 100644 index 000000000000..8ae4940025f8 --- /dev/null +++ b/samples/bpf/.gitignore @@ -0,0 +1,49 @@ +cpustat +fds_example +lathist +load_sock_ops +lwt_len_hist +map_perf_test +offwaketime +per_socket_stats_example +sampleip +sock_example +sockex1 +sockex2 +sockex3 +spintest +syscall_nrs.h +syscall_tp +task_fd_query +tc_l2_redirect +test_cgrp2_array_pin +test_cgrp2_attach +test_cgrp2_attach2 +test_cgrp2_sock +test_cgrp2_sock2 +test_current_task_under_cgroup +test_lru_dist +test_map_in_map +test_overhead +test_probe_write_user +trace_event +trace_output +tracex1 +tracex2 +tracex3 +tracex4 +tracex5 +tracex6 +tracex7 +xdp1 +xdp2 +xdp_adjust_tail +xdp_fwd +xdp_monitor +xdp_redirect +xdp_redirect_cpu +xdp_redirect_map +xdp_router_ipv4 +xdp_rxq_info +xdp_tx_iptunnel +xdpsock -- cgit v1.2.3 From 987553894f0ce8c1d83578136603a89009f42d35 Mon Sep 17 00:00:00 2001 From: Greentime Hu Date: Thu, 5 Jul 2018 16:13:47 +0800 Subject: nds32: fix build error "relocation truncated to fit: R_NDS32_25_PCREL_RELA" when make allyesconfig It will cause a linking error because the jump assembly code were using j, however it may be not enough to jump to the destination. We have to change it with pseudo instruction b. In that way, assembler will generate a set of safe assembly codes to make sure the destination is able to jump. Toolchain: https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/x86_64-gcc-8.1.0-nolibc-nds32le-linux.tar.gz Command: PATH=/NOBACKUP/atcsqa06/greentime/os/toolchain-kernel.org/gcc-8.1.0-nolibc/nds32le-linux/bin:$PATH ARCH=nds32 CROSS_COMPILE=nds32le-linux- make allyesconfig PATH=/NOBACKUP/atcsqa06/greentime/os/toolchain-kernel.org/gcc-8.1.0-nolibc/nds32le-linux/bin:$PATH ARCH=nds32 CROSS_COMPILE=nds32le-linux- make -j8 MODPOST vmlinux.o WARNING: EXPORT symbol "copy_page" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "clear_page" [vmlinux] version generation failed, symbol will not be versioned. nds32le-linux-ld: kernel/futex.o:(.fixup+0x4): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xaa): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xb0): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xb6): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xbc): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xc4): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' Makefile:1010: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 Signed-off-by: Greentime Hu --- arch/nds32/include/asm/futex.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/nds32/include/asm/futex.h b/arch/nds32/include/asm/futex.h index eab5e84bd991..cb6cb91cfdf8 100644 --- a/arch/nds32/include/asm/futex.h +++ b/arch/nds32/include/asm/futex.h @@ -16,7 +16,7 @@ " .popsection\n" \ " .pushsection .fixup,\"ax\"\n" \ "4: move %0, " err_reg "\n" \ - " j 3b\n" \ + " b 3b\n" \ " .popsection" #define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ -- cgit v1.2.3 From a6032120d341badd9b034cb64411e7089d8f4285 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 30 May 2018 23:47:09 +0200 Subject: ieee802154: mcr20a: add missing includes Without CONFIG_GPIOLIB, some headers are not included implicitly, leading to a build failure: drivers/net/ieee802154/mcr20a.c: In function 'mcr20a_probe': drivers/net/ieee802154/mcr20a.c:1347:13: error: implicit declaration of function 'irq_get_trigger_type'; did you mean 'irq_get_irqchip_state'? [-Werror=implicit-function-declaration] This includes gpio/consumer.h and irq.h directly rather through the gpiolib header. Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver") Signed-off-by: Arnd Bergmann Acked-by: Xue Liu Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/mcr20a.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/mcr20a.c b/drivers/net/ieee802154/mcr20a.c index de0d7f28a181..e428277781ac 100644 --- a/drivers/net/ieee802154/mcr20a.c +++ b/drivers/net/ieee802154/mcr20a.c @@ -15,10 +15,11 @@ */ #include #include -#include +#include #include #include #include +#include #include #include #include -- cgit v1.2.3 From b30c122c0bbb0a1dc413085e177ea09467e65fdb Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Mon, 2 Jul 2018 11:21:47 +0200 Subject: ieee802154: 6lowpan: set IFLA_LINK Otherwise NetworkManager (and iproute alike) is not able to identify the parent IEEE 802.15.4 interface of a 6LoWPAN link. Signed-off-by: Lubomir Rintel Acked-by: Alexander Aring Signed-off-by: Stefan Schmidt --- net/ieee802154/6lowpan/core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/ieee802154/6lowpan/core.c b/net/ieee802154/6lowpan/core.c index 275449b0d633..3297e7fa9945 100644 --- a/net/ieee802154/6lowpan/core.c +++ b/net/ieee802154/6lowpan/core.c @@ -90,12 +90,18 @@ static int lowpan_neigh_construct(struct net_device *dev, struct neighbour *n) return 0; } +static int lowpan_get_iflink(const struct net_device *dev) +{ + return lowpan_802154_dev(dev)->wdev->ifindex; +} + static const struct net_device_ops lowpan_netdev_ops = { .ndo_init = lowpan_dev_init, .ndo_start_xmit = lowpan_xmit, .ndo_open = lowpan_open, .ndo_stop = lowpan_stop, .ndo_neigh_construct = lowpan_neigh_construct, + .ndo_get_iflink = lowpan_get_iflink, }; static void lowpan_setup(struct net_device *ldev) -- cgit v1.2.3 From d376bef9c29b3c65aeee4e785fffcd97ef0a9a81 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 4 Jul 2018 20:25:32 +0200 Subject: netfilter: x_tables: set module owner for icmp(6) matches nft_compat relies on xt_request_find_match to increment refcount of the module that provides the match/target. The (builtin) icmp matches did't set the module owner so it was possible to rmmod ip(6)tables while icmp extensions were still in use. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/ipv4/netfilter/ip_tables.c | 1 + net/ipv6/netfilter/ip6_tables.c | 1 + 2 files changed, 2 insertions(+) diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c index ca0dad90803a..e77872c93c20 100644 --- a/net/ipv4/netfilter/ip_tables.c +++ b/net/ipv4/netfilter/ip_tables.c @@ -1898,6 +1898,7 @@ static struct xt_match ipt_builtin_mt[] __read_mostly = { .checkentry = icmp_checkentry, .proto = IPPROTO_ICMP, .family = NFPROTO_IPV4, + .me = THIS_MODULE, }, }; diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c index 7eab959734bc..daf2e9e9193d 100644 --- a/net/ipv6/netfilter/ip6_tables.c +++ b/net/ipv6/netfilter/ip6_tables.c @@ -1909,6 +1909,7 @@ static struct xt_match ip6t_builtin_mt[] __read_mostly = { .checkentry = icmp6_checkentry, .proto = IPPROTO_ICMPV6, .family = NFPROTO_IPV6, + .me = THIS_MODULE, }, }; -- cgit v1.2.3 From 0df8adbb88db8283f102a2afa91610a502245cb2 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 4 Jul 2018 12:52:36 +0300 Subject: qed: off by one in qed_parse_mcp_trace_buf() If format_idx == s_mcp_trace_meta.formats_num then we read one element beyond the end of the s_mcp_trace_meta.formats[] array. Fixes: 50bc60cb155c ("qed*: Utilize FW 8.33.11.0") Signed-off-by: Dan Carpenter Acked-by: Tomer Tayar Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_debug.c b/drivers/net/ethernet/qlogic/qed/qed_debug.c index a14e48489029..4340c4c90bcb 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_debug.c +++ b/drivers/net/ethernet/qlogic/qed/qed_debug.c @@ -6723,7 +6723,7 @@ static enum dbg_status qed_parse_mcp_trace_buf(u8 *trace_buf, format_idx = header & MFW_TRACE_EVENTID_MASK; /* Skip message if its index doesn't exist in the meta data */ - if (format_idx > s_mcp_trace_meta.formats_num) { + if (format_idx >= s_mcp_trace_meta.formats_num) { u8 format_size = (u8)((header & MFW_TRACE_PRM_SIZE_MASK) >> MFW_TRACE_PRM_SIZE_SHIFT); -- cgit v1.2.3 From a9ba23d48dbc6ffd08426bb10f05720e0b9f5c14 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 4 Jul 2018 09:58:05 -0400 Subject: ipv6: make ipv6_renew_options() interrupt/kernel safe At present the ipv6_renew_options_kern() function ends up calling into access_ok() which is problematic if done from inside an interrupt as access_ok() calls WARN_ON_IN_IRQ() on some (all?) architectures (x86-64 is affected). Example warning/backtrace is shown below: WARNING: CPU: 1 PID: 3144 at lib/usercopy.c:11 _copy_from_user+0x85/0x90 ... Call Trace: ipv6_renew_option+0xb2/0xf0 ipv6_renew_options+0x26a/0x340 ipv6_renew_options_kern+0x2c/0x40 calipso_req_setattr+0x72/0xe0 netlbl_req_setattr+0x126/0x1b0 selinux_netlbl_inet_conn_request+0x80/0x100 selinux_inet_conn_request+0x6d/0xb0 security_inet_conn_request+0x32/0x50 tcp_conn_request+0x35f/0xe00 ? __lock_acquire+0x250/0x16c0 ? selinux_socket_sock_rcv_skb+0x1ae/0x210 ? tcp_rcv_state_process+0x289/0x106b tcp_rcv_state_process+0x289/0x106b ? tcp_v6_do_rcv+0x1a7/0x3c0 tcp_v6_do_rcv+0x1a7/0x3c0 tcp_v6_rcv+0xc82/0xcf0 ip6_input_finish+0x10d/0x690 ip6_input+0x45/0x1e0 ? ip6_rcv_finish+0x1d0/0x1d0 ipv6_rcv+0x32b/0x880 ? ip6_make_skb+0x1e0/0x1e0 __netif_receive_skb_core+0x6f2/0xdf0 ? process_backlog+0x85/0x250 ? process_backlog+0x85/0x250 ? process_backlog+0xec/0x250 process_backlog+0xec/0x250 net_rx_action+0x153/0x480 __do_softirq+0xd9/0x4f7 do_softirq_own_stack+0x2a/0x40 ... While not present in the backtrace, ipv6_renew_option() ends up calling access_ok() via the following chain: access_ok() _copy_from_user() copy_from_user() ipv6_renew_option() The fix presented in this patch is to perform the userspace copy earlier in the call chain such that it is only called when the option data is actually coming from userspace; that place is do_ipv6_setsockopt(). Not only does this solve the problem seen in the backtrace above, it also allows us to simplify the code quite a bit by removing ipv6_renew_options_kern() completely. We also take this opportunity to cleanup ipv6_renew_options()/ipv6_renew_option() a small amount as well. This patch is heavily based on a rough patch by Al Viro. I've taken his original patch, converted a kmemdup() call in do_ipv6_setsockopt() to a memdup_user() call, made better use of the e_inval jump target in the same function, and cleaned up the use ipv6_renew_option() by ipv6_renew_options(). CC: Al Viro Signed-off-by: Paul Moore Signed-off-by: David S. Miller --- include/net/ipv6.h | 9 +--- net/ipv6/calipso.c | 9 ++-- net/ipv6/exthdrs.c | 111 +++++++++++++---------------------------------- net/ipv6/ipv6_sockglue.c | 27 ++++++++---- 4 files changed, 53 insertions(+), 103 deletions(-) diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 16475c269749..d02881e4ad1f 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -355,14 +355,7 @@ struct ipv6_txoptions *ipv6_dup_options(struct sock *sk, struct ipv6_txoptions *ipv6_renew_options(struct sock *sk, struct ipv6_txoptions *opt, int newtype, - struct ipv6_opt_hdr __user *newopt, - int newoptlen); -struct ipv6_txoptions * -ipv6_renew_options_kern(struct sock *sk, - struct ipv6_txoptions *opt, - int newtype, - struct ipv6_opt_hdr *newopt, - int newoptlen); + struct ipv6_opt_hdr *newopt); struct ipv6_txoptions *ipv6_fixup_options(struct ipv6_txoptions *opt_space, struct ipv6_txoptions *opt); diff --git a/net/ipv6/calipso.c b/net/ipv6/calipso.c index 1323b9679cf7..1c0bb9fb76e6 100644 --- a/net/ipv6/calipso.c +++ b/net/ipv6/calipso.c @@ -799,8 +799,7 @@ static int calipso_opt_update(struct sock *sk, struct ipv6_opt_hdr *hop) { struct ipv6_txoptions *old = txopt_get(inet6_sk(sk)), *txopts; - txopts = ipv6_renew_options_kern(sk, old, IPV6_HOPOPTS, - hop, hop ? ipv6_optlen(hop) : 0); + txopts = ipv6_renew_options(sk, old, IPV6_HOPOPTS, hop); txopt_put(old); if (IS_ERR(txopts)) return PTR_ERR(txopts); @@ -1222,8 +1221,7 @@ static int calipso_req_setattr(struct request_sock *req, if (IS_ERR(new)) return PTR_ERR(new); - txopts = ipv6_renew_options_kern(sk, req_inet->ipv6_opt, IPV6_HOPOPTS, - new, new ? ipv6_optlen(new) : 0); + txopts = ipv6_renew_options(sk, req_inet->ipv6_opt, IPV6_HOPOPTS, new); kfree(new); @@ -1260,8 +1258,7 @@ static void calipso_req_delattr(struct request_sock *req) if (calipso_opt_del(req_inet->ipv6_opt->hopopt, &new)) return; /* Nothing to do */ - txopts = ipv6_renew_options_kern(sk, req_inet->ipv6_opt, IPV6_HOPOPTS, - new, new ? ipv6_optlen(new) : 0); + txopts = ipv6_renew_options(sk, req_inet->ipv6_opt, IPV6_HOPOPTS, new); if (!IS_ERR(txopts)) { txopts = xchg(&req_inet->ipv6_opt, txopts); diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c index 5bc2bf3733ab..20291c2036fc 100644 --- a/net/ipv6/exthdrs.c +++ b/net/ipv6/exthdrs.c @@ -1015,29 +1015,21 @@ ipv6_dup_options(struct sock *sk, struct ipv6_txoptions *opt) } EXPORT_SYMBOL_GPL(ipv6_dup_options); -static int ipv6_renew_option(void *ohdr, - struct ipv6_opt_hdr __user *newopt, int newoptlen, - int inherit, - struct ipv6_opt_hdr **hdr, - char **p) +static void ipv6_renew_option(int renewtype, + struct ipv6_opt_hdr **dest, + struct ipv6_opt_hdr *old, + struct ipv6_opt_hdr *new, + int newtype, char **p) { - if (inherit) { - if (ohdr) { - memcpy(*p, ohdr, ipv6_optlen((struct ipv6_opt_hdr *)ohdr)); - *hdr = (struct ipv6_opt_hdr *)*p; - *p += CMSG_ALIGN(ipv6_optlen(*hdr)); - } - } else { - if (newopt) { - if (copy_from_user(*p, newopt, newoptlen)) - return -EFAULT; - *hdr = (struct ipv6_opt_hdr *)*p; - if (ipv6_optlen(*hdr) > newoptlen) - return -EINVAL; - *p += CMSG_ALIGN(newoptlen); - } - } - return 0; + struct ipv6_opt_hdr *src; + + src = (renewtype == newtype ? new : old); + if (!src) + return; + + memcpy(*p, src, ipv6_optlen(src)); + *dest = (struct ipv6_opt_hdr *)*p; + *p += CMSG_ALIGN(ipv6_optlen(*dest)); } /** @@ -1063,13 +1055,11 @@ static int ipv6_renew_option(void *ohdr, */ struct ipv6_txoptions * ipv6_renew_options(struct sock *sk, struct ipv6_txoptions *opt, - int newtype, - struct ipv6_opt_hdr __user *newopt, int newoptlen) + int newtype, struct ipv6_opt_hdr *newopt) { int tot_len = 0; char *p; struct ipv6_txoptions *opt2; - int err; if (opt) { if (newtype != IPV6_HOPOPTS && opt->hopopt) @@ -1082,8 +1072,8 @@ ipv6_renew_options(struct sock *sk, struct ipv6_txoptions *opt, tot_len += CMSG_ALIGN(ipv6_optlen(opt->dst1opt)); } - if (newopt && newoptlen) - tot_len += CMSG_ALIGN(newoptlen); + if (newopt) + tot_len += CMSG_ALIGN(ipv6_optlen(newopt)); if (!tot_len) return NULL; @@ -1098,29 +1088,19 @@ ipv6_renew_options(struct sock *sk, struct ipv6_txoptions *opt, opt2->tot_len = tot_len; p = (char *)(opt2 + 1); - err = ipv6_renew_option(opt ? opt->hopopt : NULL, newopt, newoptlen, - newtype != IPV6_HOPOPTS, - &opt2->hopopt, &p); - if (err) - goto out; - - err = ipv6_renew_option(opt ? opt->dst0opt : NULL, newopt, newoptlen, - newtype != IPV6_RTHDRDSTOPTS, - &opt2->dst0opt, &p); - if (err) - goto out; - - err = ipv6_renew_option(opt ? opt->srcrt : NULL, newopt, newoptlen, - newtype != IPV6_RTHDR, - (struct ipv6_opt_hdr **)&opt2->srcrt, &p); - if (err) - goto out; - - err = ipv6_renew_option(opt ? opt->dst1opt : NULL, newopt, newoptlen, - newtype != IPV6_DSTOPTS, - &opt2->dst1opt, &p); - if (err) - goto out; + ipv6_renew_option(IPV6_HOPOPTS, &opt2->hopopt, + (opt ? opt->hopopt : NULL), + newopt, newtype, &p); + ipv6_renew_option(IPV6_RTHDRDSTOPTS, &opt2->dst0opt, + (opt ? opt->dst0opt : NULL), + newopt, newtype, &p); + ipv6_renew_option(IPV6_RTHDR, + (struct ipv6_opt_hdr **)&opt2->srcrt, + (opt ? (struct ipv6_opt_hdr *)opt->srcrt : NULL), + newopt, newtype, &p); + ipv6_renew_option(IPV6_DSTOPTS, &opt2->dst1opt, + (opt ? opt->dst1opt : NULL), + newopt, newtype, &p); opt2->opt_nflen = (opt2->hopopt ? ipv6_optlen(opt2->hopopt) : 0) + (opt2->dst0opt ? ipv6_optlen(opt2->dst0opt) : 0) + @@ -1128,37 +1108,6 @@ ipv6_renew_options(struct sock *sk, struct ipv6_txoptions *opt, opt2->opt_flen = (opt2->dst1opt ? ipv6_optlen(opt2->dst1opt) : 0); return opt2; -out: - sock_kfree_s(sk, opt2, opt2->tot_len); - return ERR_PTR(err); -} - -/** - * ipv6_renew_options_kern - replace a specific ext hdr with a new one. - * - * @sk: sock from which to allocate memory - * @opt: original options - * @newtype: option type to replace in @opt - * @newopt: new option of type @newtype to replace (kernel-mem) - * @newoptlen: length of @newopt - * - * See ipv6_renew_options(). The difference is that @newopt is - * kernel memory, rather than user memory. - */ -struct ipv6_txoptions * -ipv6_renew_options_kern(struct sock *sk, struct ipv6_txoptions *opt, - int newtype, struct ipv6_opt_hdr *newopt, - int newoptlen) -{ - struct ipv6_txoptions *ret_val; - const mm_segment_t old_fs = get_fs(); - - set_fs(KERNEL_DS); - ret_val = ipv6_renew_options(sk, opt, newtype, - (struct ipv6_opt_hdr __user *)newopt, - newoptlen); - set_fs(old_fs); - return ret_val; } struct ipv6_txoptions *ipv6_fixup_options(struct ipv6_txoptions *opt_space, diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 4d780c7f0130..c95c3486d904 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -398,6 +398,12 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, case IPV6_DSTOPTS: { struct ipv6_txoptions *opt; + struct ipv6_opt_hdr *new = NULL; + + /* hop-by-hop / destination options are privileged option */ + retv = -EPERM; + if (optname != IPV6_RTHDR && !ns_capable(net->user_ns, CAP_NET_RAW)) + break; /* remove any sticky options header with a zero option * length, per RFC3542. @@ -409,17 +415,22 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, else if (optlen < sizeof(struct ipv6_opt_hdr) || optlen & 0x7 || optlen > 8 * 255) goto e_inval; - - /* hop-by-hop / destination options are privileged option */ - retv = -EPERM; - if (optname != IPV6_RTHDR && !ns_capable(net->user_ns, CAP_NET_RAW)) - break; + else { + new = memdup_user(optval, optlen); + if (IS_ERR(new)) { + retv = PTR_ERR(new); + break; + } + if (unlikely(ipv6_optlen(new) > optlen)) { + kfree(new); + goto e_inval; + } + } opt = rcu_dereference_protected(np->opt, lockdep_sock_is_held(sk)); - opt = ipv6_renew_options(sk, opt, optname, - (struct ipv6_opt_hdr __user *)optval, - optlen); + opt = ipv6_renew_options(sk, opt, optname, new); + kfree(new); if (IS_ERR(opt)) { retv = PTR_ERR(opt); break; -- cgit v1.2.3 From fdf5fd3975666804118e62c69de25dc85cc0909c Mon Sep 17 00:00:00 2001 From: Arun Kumar Neelakantam Date: Wed, 4 Jul 2018 19:49:32 +0530 Subject: net: qrtr: Broadcast messages only from control port The broadcast node id should only be sent with the control port id. Signed-off-by: Arun Kumar Neelakantam Signed-off-by: David S. Miller --- net/qrtr/qrtr.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/qrtr/qrtr.c b/net/qrtr/qrtr.c index 2aa07b547b16..7ffc9a3a7dd4 100644 --- a/net/qrtr/qrtr.c +++ b/net/qrtr/qrtr.c @@ -764,6 +764,10 @@ static int qrtr_sendmsg(struct socket *sock, struct msghdr *msg, size_t len) node = NULL; if (addr->sq_node == QRTR_NODE_BCAST) { enqueue_fn = qrtr_bcast_enqueue; + if (addr->sq_port != QRTR_PORT_CTRL) { + release_sock(sk); + return -ENOTCONN; + } } else if (addr->sq_node == ipc->us.sq_node) { enqueue_fn = qrtr_local_enqueue; } else { -- cgit v1.2.3 From d27e77a3de2866b0a772803fd03cd667b5ff8a9a Mon Sep 17 00:00:00 2001 From: Arun Kumar Neelakantam Date: Wed, 4 Jul 2018 19:49:33 +0530 Subject: net: qrtr: Reset the node and port ID of broadcast messages All the control messages broadcast to remote routers are using QRTR_NODE_BCAST instead of using local router NODE ID which cause the packets to be dropped on remote router due to invalid NODE ID. Signed-off-by: Arun Kumar Neelakantam Signed-off-by: David S. Miller --- net/qrtr/qrtr.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/qrtr/qrtr.c b/net/qrtr/qrtr.c index 7ffc9a3a7dd4..86e1e37eb4e8 100644 --- a/net/qrtr/qrtr.c +++ b/net/qrtr/qrtr.c @@ -191,8 +191,13 @@ static int qrtr_node_enqueue(struct qrtr_node *node, struct sk_buff *skb, hdr->type = cpu_to_le32(type); hdr->src_node_id = cpu_to_le32(from->sq_node); hdr->src_port_id = cpu_to_le32(from->sq_port); - hdr->dst_node_id = cpu_to_le32(to->sq_node); - hdr->dst_port_id = cpu_to_le32(to->sq_port); + if (to->sq_port == QRTR_PORT_CTRL) { + hdr->dst_node_id = cpu_to_le32(node->nid); + hdr->dst_port_id = cpu_to_le32(QRTR_NODE_BCAST); + } else { + hdr->dst_node_id = cpu_to_le32(to->sq_node); + hdr->dst_port_id = cpu_to_le32(to->sq_port); + } hdr->size = cpu_to_le32(len); hdr->confirm_rx = 0; -- cgit v1.2.3 From 38cd58ed9c4e389799b507bcffe02a7a7a180b33 Mon Sep 17 00:00:00 2001 From: Matevz Vucnik Date: Wed, 4 Jul 2018 18:12:48 +0200 Subject: qmi_wwan: add support for Quectel EG91 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds the USB id of LTE modem Quectel EG91. It requires the same quirk as other Quectel modems to make it work. Signed-off-by: Matevz Vucnik Acked-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 8fac8e132c5b..38502809420b 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1253,6 +1253,7 @@ static const struct usb_device_id products[] = { {QMI_QUIRK_SET_DTR(0x1e0e, 0x9001, 5)}, /* SIMCom 7100E, 7230E, 7600E ++ */ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0125, 4)}, /* Quectel EC25, EC20 R2.0 Mini PCIe */ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0121, 4)}, /* Quectel EC21 Mini PCIe */ + {QMI_QUIRK_SET_DTR(0x2c7c, 0x0191, 4)}, /* Quectel EG91 */ {QMI_FIXED_INTF(0x2c7c, 0x0296, 4)}, /* Quectel BG96 */ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0306, 4)}, /* Quectel EP06 Mini PCIe */ -- cgit v1.2.3 From b8ba3578752b7aae5b6f8bd235873ea112969ff9 Mon Sep 17 00:00:00 2001 From: Stefan Mavrodiev Date: Wed, 4 Jul 2018 09:28:59 +0300 Subject: mmc: sunxi: Disable irq during pm_suspend When mmc host controller enters suspend state, the clocks are disabled, but irqs are not. For some reason the irqchip emits false interrupts, which causes system lock loop. Debug log is: ... sunxi-mmc 1c11000.mmc: setting clk to 52000000, rounded 51200000 sunxi-mmc 1c11000.mmc: enabling the clock sunxi-mmc 1c11000.mmc: cmd 13(8000014d) arg 10000 ie 0x0000bbc6 len 0 sunxi-mmc 1c11000.mmc: irq: rq (ptrval) mi 00000004 idi 00000000 sunxi-mmc 1c11000.mmc: cmd 6(80000146) arg 3210101 ie 0x0000bbc6 len 0 sunxi-mmc 1c11000.mmc: irq: rq (ptrval) mi 00000004 idi 00000000 sunxi-mmc 1c11000.mmc: cmd 13(8000014d) arg 10000 ie 0x0000bbc6 len 0 sunxi-mmc 1c11000.mmc: irq: rq (ptrval) mi 00000004 idi 00000000 mmc1: new DDR MMC card at address 0001 mmcblk1: mmc1:0001 AGND3R 14.6 GiB mmcblk1boot0: mmc1:0001 AGND3R partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 AGND3R partition 2 4.00 MiB sunxi-mmc 1c11000.mmc: cmd 18(80003352) arg 0 ie 0x0000fbc2 len 409 sunxi-mmc 1c11000.mmc: irq: rq (ptrval) mi 00004000 idi 00000002 mmcblk1: p1 sunxi-mmc 1c11000.mmc: irq: rq (null) mi 00000000 idi 00000000 sunxi-mmc 1c11000.mmc: irq: rq (null) mi 00000000 idi 00000000 sunxi-mmc 1c11000.mmc: irq: rq (null) mi 00000000 idi 00000000 sunxi-mmc 1c11000.mmc: irq: rq (null) mi 00000000 idi 00000000 and so on... This issue apears on eMMC cards, routed on MMC2 slot. The patch is tested with A20-OLinuXino-MICRO/LIME/LIME2 boards. Fixes: 9a8e1e8cc2c0 ("mmc: sunxi: Add runtime_pm support") Signed-off-by: Stefan Mavrodiev Acked-by: Maxime Ripard Signed-off-by: Ulf Hansson --- drivers/mmc/host/sunxi-mmc.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c index e7472590f2ed..8e7f3e35ee3d 100644 --- a/drivers/mmc/host/sunxi-mmc.c +++ b/drivers/mmc/host/sunxi-mmc.c @@ -1446,6 +1446,7 @@ static int sunxi_mmc_runtime_resume(struct device *dev) sunxi_mmc_init_host(host); sunxi_mmc_set_bus_width(host, mmc->ios.bus_width); sunxi_mmc_set_clk(host, &mmc->ios); + enable_irq(host->irq); return 0; } @@ -1455,6 +1456,12 @@ static int sunxi_mmc_runtime_suspend(struct device *dev) struct mmc_host *mmc = dev_get_drvdata(dev); struct sunxi_mmc_host *host = mmc_priv(mmc); + /* + * When clocks are off, it's possible receiving + * fake interrupts, which will stall the system. + * Disabling the irq will prevent this. + */ + disable_irq(host->irq); sunxi_mmc_reset_host(host); sunxi_mmc_disable(host); -- cgit v1.2.3 From 2c83a726d6fbb5d130d8f2edd82a258adb675ac3 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 27 Jun 2018 15:58:13 +0200 Subject: drm/etnaviv: bring back progress check in job timeout handler When the hangcheck handler was replaced by the DRM scheduler timeout handling we dropped the forward progress check, as this might allow clients to hog the GPU for a long time with a big job. It turns out that even reasonably well behaved clients like the Armada Xorg driver occasionally trip over the 500ms timeout. Bring back the forward progress check to get rid of the userspace regression. We would still like to fix userspace to submit smaller batches if possible, but that is for another day. Cc: Fixes: 6d7a20c07760 (drm/etnaviv: replace hangcheck with scheduler timeout) Reported-by: Russell King Signed-off-by: Lucas Stach Reviewed-by: Eric Anholt --- drivers/gpu/drm/etnaviv/etnaviv_gpu.h | 3 +++ drivers/gpu/drm/etnaviv/etnaviv_sched.c | 24 ++++++++++++++++++++++++ 2 files changed, 27 insertions(+) diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h index dd430f0f8ff5..90f17ff7888e 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h @@ -131,6 +131,9 @@ struct etnaviv_gpu { struct work_struct sync_point_work; int sync_point_event; + /* hang detection */ + u32 hangcheck_dma_addr; + void __iomem *mmio; int irq; diff --git a/drivers/gpu/drm/etnaviv/etnaviv_sched.c b/drivers/gpu/drm/etnaviv/etnaviv_sched.c index a74eb57af15b..50d6b88cb7aa 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_sched.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_sched.c @@ -10,6 +10,7 @@ #include "etnaviv_gem.h" #include "etnaviv_gpu.h" #include "etnaviv_sched.h" +#include "state.xml.h" static int etnaviv_job_hang_limit = 0; module_param_named(job_hang_limit, etnaviv_job_hang_limit, int , 0444); @@ -85,6 +86,29 @@ static void etnaviv_sched_timedout_job(struct drm_sched_job *sched_job) { struct etnaviv_gem_submit *submit = to_etnaviv_submit(sched_job); struct etnaviv_gpu *gpu = submit->gpu; + u32 dma_addr; + int change; + + /* + * If the GPU managed to complete this jobs fence, the timout is + * spurious. Bail out. + */ + if (fence_completed(gpu, submit->out_fence->seqno)) + return; + + /* + * If the GPU is still making forward progress on the front-end (which + * should never loop) we shift out the timeout to give it a chance to + * finish the job. + */ + dma_addr = gpu_read(gpu, VIVS_FE_DMA_ADDRESS); + change = dma_addr - gpu->hangcheck_dma_addr; + if (change < 0 || change > 16) { + gpu->hangcheck_dma_addr = dma_addr; + schedule_delayed_work(&sched_job->work_tdr, + sched_job->sched->timeout); + return; + } /* block scheduler */ kthread_park(gpu->sched.thread); -- cgit v1.2.3 From a6311be8f062db5fe93a08a3722fae53a58f2499 Mon Sep 17 00:00:00 2001 From: Mikita Lipski Date: Wed, 4 Jul 2018 17:26:26 -0400 Subject: drm/amd/display: adding ycbcr420 pixel encoding for hdmi [why] HDMI EDID's VSDB contains spectial timings for specifically YCbCr 4:2:0 colour space. In those cases we need to verify if the mode provided is one of the special ones has to use YCbCr 4:2:0 pixel encoding for display info. [how] Verify if the mode is using specific ycbcr420 colour space with the help of DRM helper function and assign the mode to use ycbcr420 pixel encoding. Tested-by: Mike Lothian Reviewed-by: Harry Wentland Signed-off-by: Mikita Lipski Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 3a8d6356afc2..f97dfc13a8f0 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2183,6 +2183,7 @@ fill_stream_properties_from_drm_display_mode(struct dc_stream_state *stream, const struct drm_connector *connector) { struct dc_crtc_timing *timing_out = &stream->timing; + const struct drm_display_info *info = &connector->display_info; memset(timing_out, 0, sizeof(struct dc_crtc_timing)); @@ -2191,8 +2192,10 @@ fill_stream_properties_from_drm_display_mode(struct dc_stream_state *stream, timing_out->v_border_top = 0; timing_out->v_border_bottom = 0; /* TODO: un-hardcode */ - - if ((connector->display_info.color_formats & DRM_COLOR_FORMAT_YCRCB444) + if (drm_mode_is_420_only(info, mode_in) + && stream->sink->sink_signal == SIGNAL_TYPE_HDMI_TYPE_A) + timing_out->pixel_encoding = PIXEL_ENCODING_YCBCR420; + else if ((connector->display_info.color_formats & DRM_COLOR_FORMAT_YCRCB444) && stream->sink->sink_signal == SIGNAL_TYPE_HDMI_TYPE_A) timing_out->pixel_encoding = PIXEL_ENCODING_YCBCR444; else -- cgit v1.2.3 From e2a46a48b94d143b7fabd9da7d45eef1a0799986 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 5 Jul 2018 12:27:53 +0200 Subject: MAINTAINERS: Add myself as driver core changes reviewer I really need to look at driver core changes before they are applied due to PM dependencies and they sometimes get lost in the LKML traffic, so add myself as an official driver core reviewer. Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 6cfd16790add..68aa943a672c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4456,6 +4456,7 @@ F: Documentation/blockdev/drbd/ DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS M: Greg Kroah-Hartman +R: "Rafael J. Wysocki" T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git S: Supported F: Documentation/kobject.txt -- cgit v1.2.3 From 413ff0b942481c7ac2e800abbbac5af318a65e61 Mon Sep 17 00:00:00 2001 From: Mikita Lipski Date: Wed, 4 Jul 2018 17:27:56 -0400 Subject: drm/amd/display: add a check for display depth validity [why] HDMI 2.0 fails to validate 4K@60 timing with 10 bpc [how] Adding a helper function that would verify if the display depth assigned would pass a bandwidth validation. Drop the display depth by one level till calculated pixel clk is lower than maximum TMDS clk. Bugzilla: https://bugs.freedesktop.org/106959 Tested-by: Mike Lothian Reviewed-by: Harry Wentland Signed-off-by: Mikita Lipski Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 42 +++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index f97dfc13a8f0..770c6b24be0b 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2175,6 +2175,46 @@ get_output_color_space(const struct dc_crtc_timing *dc_crtc_timing) return color_space; } +static void reduce_mode_colour_depth(struct dc_crtc_timing *timing_out) +{ + if (timing_out->display_color_depth <= COLOR_DEPTH_888) + return; + + timing_out->display_color_depth--; +} + +static void adjust_colour_depth_from_display_info(struct dc_crtc_timing *timing_out, + const struct drm_display_info *info) +{ + int normalized_clk; + if (timing_out->display_color_depth <= COLOR_DEPTH_888) + return; + do { + normalized_clk = timing_out->pix_clk_khz; + /* YCbCr 4:2:0 requires additional adjustment of 1/2 */ + if (timing_out->pixel_encoding == PIXEL_ENCODING_YCBCR420) + normalized_clk /= 2; + /* Adjusting pix clock following on HDMI spec based on colour depth */ + switch (timing_out->display_color_depth) { + case COLOR_DEPTH_101010: + normalized_clk = (normalized_clk * 30) / 24; + break; + case COLOR_DEPTH_121212: + normalized_clk = (normalized_clk * 36) / 24; + break; + case COLOR_DEPTH_161616: + normalized_clk = (normalized_clk * 48) / 24; + break; + default: + return; + } + if (normalized_clk <= info->max_tmds_clock) + return; + reduce_mode_colour_depth(timing_out); + + } while (timing_out->display_color_depth > COLOR_DEPTH_888); + +} /*****************************************************************************/ static void @@ -2231,6 +2271,8 @@ fill_stream_properties_from_drm_display_mode(struct dc_stream_state *stream, stream->out_transfer_func->type = TF_TYPE_PREDEFINED; stream->out_transfer_func->tf = TRANSFER_FUNCTION_SRGB; + if (stream->sink->sink_signal == SIGNAL_TYPE_HDMI_TYPE_A) + adjust_colour_depth_from_display_info(timing_out, info); } static void fill_audio_info(struct audio_info *audio_info, -- cgit v1.2.3 From 1a381d4a0a9a0f999a13faaba22bf6b3fc80dcb9 Mon Sep 17 00:00:00 2001 From: Greg Hackmann Date: Wed, 27 Jun 2018 12:46:14 -0700 Subject: arm64: remove no-op -p linker flag Linking the ARM64 defconfig kernel with LLVM lld fails with the error: ld.lld: error: unknown argument: -p Makefile:1015: recipe for target 'vmlinux' failed Without this flag, the ARM64 defconfig kernel successfully links with lld and boots on Dragonboard 410c. After digging through binutils source and changelogs, it turns out that -p is only relevant to ancient binutils installations targeting 32-bit ARM. binutils accepts -p for AArch64 too, but it's always been undocumented and silently ignored. A comment in ld/emultempl/aarch64elf.em explains that it's "Only here for backwards compatibility". Since this flag is a no-op on ARM64, we can safely drop it. Acked-by: Will Deacon Reviewed-by: Nick Desaulniers Signed-off-by: Greg Hackmann Signed-off-by: Catalin Marinas --- arch/arm64/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 48158c550110..7976d2d242fa 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -10,7 +10,7 @@ # # Copyright (C) 1995-2001 by Russell King -LDFLAGS_vmlinux :=-p --no-undefined -X +LDFLAGS_vmlinux :=--no-undefined -X CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET) GZFLAGS :=-9 -- cgit v1.2.3 From d02d21ea007b6b33cdaf15c2f84fb1fea996ecc2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 4 Jul 2018 18:17:51 -0700 Subject: autofs: rename 'autofs' module back to 'autofs4' It turns out that systemd has a bug: it wants to load the autofs module early because of some initialization ordering with udev, and it doesn't do that correctly. Everywhere else it does the proper "look up module name" that does the proper alias resolution, but in that early code, it just uses a hardcoded "autofs4" for the module name. The result of that is that as of commit a2225d931f75 ("autofs: remove left-over autofs4 stubs"), you get systemd[1]: Failed to insert module 'autofs4': No such file or directory in the system logs, and a lack of module loading. All this despite the fact that we had very clearly marked 'autofs4' as an alias for this module. What's so ridiculous about this is that literally everything else does the module alias handling correctly, including really old versions of systemd (that just used 'modprobe' to do this), and even all the other systemd module loading code. Only that special systemd early module load code is broken, hardcoding the module names for not just 'autofs4', but also "ipv6", "unix", "ip_tables" and "virtio_rng". Very annoying. Instead of creating an _additional_ separate compatibility 'autofs4' module, just rely on the fact that everybody else gets this right, and just call the module 'autofs4' for compatibility reasons, with 'autofs' as the alias name. That will allow the systemd people to fix their bugs, adding the proper alias handling, and maybe even fix the name of the module to be just "autofs" (so that they can _test_ the alias handling). And eventually, we can revert this silly compatibility hack. See also https://github.com/systemd/systemd/issues/9501 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=902946 for the systemd bug reports upstream and in the Debian bug tracker respectively. Fixes: a2225d931f75 ("autofs: remove left-over autofs4 stubs") Reported-by: Ben Hutchings Reported-by: Michael Biebl Cc: Ian Kent Signed-off-by: Linus Torvalds --- fs/autofs/Makefile | 4 ++-- fs/autofs/init.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/autofs/Makefile b/fs/autofs/Makefile index 43fedde15c26..1f85d35ec8b7 100644 --- a/fs/autofs/Makefile +++ b/fs/autofs/Makefile @@ -2,6 +2,6 @@ # Makefile for the linux autofs-filesystem routines. # -obj-$(CONFIG_AUTOFS_FS) += autofs.o +obj-$(CONFIG_AUTOFS_FS) += autofs4.o -autofs-objs := init.o inode.o root.o symlink.o waitq.o expire.o dev-ioctl.o +autofs4-objs := init.o inode.o root.o symlink.o waitq.o expire.o dev-ioctl.o diff --git a/fs/autofs/init.c b/fs/autofs/init.c index cc9447e1903f..79ae07d9592f 100644 --- a/fs/autofs/init.c +++ b/fs/autofs/init.c @@ -23,7 +23,7 @@ static struct file_system_type autofs_fs_type = { .kill_sb = autofs_kill_sb, }; MODULE_ALIAS_FS("autofs"); -MODULE_ALIAS("autofs4"); +MODULE_ALIAS("autofs"); static int __init init_autofs_fs(void) { -- cgit v1.2.3 From 696e420bb2a6624478105651d5368d45b502b324 Mon Sep 17 00:00:00 2001 From: Lars Persson Date: Mon, 25 Jun 2018 14:05:25 +0200 Subject: cifs: Fix use after free of a mid_q_entry With protocol version 2.0 mounts we have seen crashes with corrupt mid entries. Either the server->pending_mid_q list becomes corrupt with a cyclic reference in one element or a mid object fetched by the demultiplexer thread becomes overwritten during use. Code review identified a race between the demultiplexer thread and the request issuing thread. The demultiplexer thread seems to be written with the assumption that it is the sole user of the mid object until it calls the mid callback which either wakes the issuer task or deletes the mid. This assumption is not true because the issuer task can be woken up earlier by a signal. If the demultiplexer thread has proceeded as far as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer thread will happily end up calling cifs_delete_mid while the demultiplexer thread still is using the mid object. Inserting a delay in the cifs demultiplexer thread widens the race window and makes reproduction of the race very easy: if (server->large_buf) buf = server->bigbuf; + usleep_range(500, 4000); server->lstrp = jiffies; To resolve this I think the proper solution involves putting a reference count on the mid object. This patch makes sure that the demultiplexer thread holds a reference until it has finished processing the transaction. Cc: stable@vger.kernel.org Signed-off-by: Lars Persson Acked-by: Paulo Alcantara Reviewed-by: Ronnie Sahlberg Reviewed-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/cifsglob.h | 1 + fs/cifs/cifsproto.h | 1 + fs/cifs/connect.c | 8 +++++++- fs/cifs/smb1ops.c | 1 + fs/cifs/smb2ops.c | 1 + fs/cifs/smb2transport.c | 1 + fs/cifs/transport.c | 18 +++++++++++++++++- 7 files changed, 29 insertions(+), 2 deletions(-) diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index bd78da59a4fd..a2962fd41c6f 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -1416,6 +1416,7 @@ typedef int (mid_handle_t)(struct TCP_Server_Info *server, /* one of these for every pending CIFS request to the server */ struct mid_q_entry { struct list_head qhead; /* mids waiting on reply from this server */ + struct kref refcount; struct TCP_Server_Info *server; /* server corresponding to this mid */ __u64 mid; /* multiplex id */ __u32 pid; /* process id */ diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 03018be17283..1890f534c88b 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -82,6 +82,7 @@ extern struct mid_q_entry *AllocMidQEntry(const struct smb_hdr *smb_buffer, struct TCP_Server_Info *server); extern void DeleteMidQEntry(struct mid_q_entry *midEntry); extern void cifs_delete_mid(struct mid_q_entry *mid); +extern void cifs_mid_q_entry_release(struct mid_q_entry *midEntry); extern void cifs_wake_up_task(struct mid_q_entry *mid); extern int cifs_handle_standard(struct TCP_Server_Info *server, struct mid_q_entry *mid); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index a57da1b88bdf..5df2c0698cda 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -924,6 +924,7 @@ next_pdu: server->pdu_size = next_offset; } + mid_entry = NULL; if (server->ops->is_transform_hdr && server->ops->receive_transform && server->ops->is_transform_hdr(buf)) { @@ -938,8 +939,11 @@ next_pdu: length = mid_entry->receive(server, mid_entry); } - if (length < 0) + if (length < 0) { + if (mid_entry) + cifs_mid_q_entry_release(mid_entry); continue; + } if (server->large_buf) buf = server->bigbuf; @@ -956,6 +960,8 @@ next_pdu: if (!mid_entry->multiRsp || mid_entry->multiEnd) mid_entry->callback(mid_entry); + + cifs_mid_q_entry_release(mid_entry); } else if (server->ops->is_oplock_break && server->ops->is_oplock_break(buf, server)) { cifs_dbg(FYI, "Received oplock break\n"); diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c index aff8ce8ba34d..646dcd149de1 100644 --- a/fs/cifs/smb1ops.c +++ b/fs/cifs/smb1ops.c @@ -107,6 +107,7 @@ cifs_find_mid(struct TCP_Server_Info *server, char *buffer) if (compare_mid(mid->mid, buf) && mid->mid_state == MID_REQUEST_SUBMITTED && le16_to_cpu(mid->command) == buf->Command) { + kref_get(&mid->refcount); spin_unlock(&GlobalMid_Lock); return mid; } diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index 0356b5559c71..e9216ce88796 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -203,6 +203,7 @@ smb2_find_mid(struct TCP_Server_Info *server, char *buf) if ((mid->mid == wire_mid) && (mid->mid_state == MID_REQUEST_SUBMITTED) && (mid->command == shdr->Command)) { + kref_get(&mid->refcount); spin_unlock(&GlobalMid_Lock); return mid; } diff --git a/fs/cifs/smb2transport.c b/fs/cifs/smb2transport.c index 51b9437c3c7b..50592976dcb4 100644 --- a/fs/cifs/smb2transport.c +++ b/fs/cifs/smb2transport.c @@ -548,6 +548,7 @@ smb2_mid_entry_alloc(const struct smb2_sync_hdr *shdr, temp = mempool_alloc(cifs_mid_poolp, GFP_NOFS); memset(temp, 0, sizeof(struct mid_q_entry)); + kref_init(&temp->refcount); temp->mid = le64_to_cpu(shdr->MessageId); temp->pid = current->pid; temp->command = shdr->Command; /* Always LE */ diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index fb57dfbfb749..208ecb830466 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -61,6 +61,7 @@ AllocMidQEntry(const struct smb_hdr *smb_buffer, struct TCP_Server_Info *server) temp = mempool_alloc(cifs_mid_poolp, GFP_NOFS); memset(temp, 0, sizeof(struct mid_q_entry)); + kref_init(&temp->refcount); temp->mid = get_mid(smb_buffer); temp->pid = current->pid; temp->command = cpu_to_le16(smb_buffer->Command); @@ -82,6 +83,21 @@ AllocMidQEntry(const struct smb_hdr *smb_buffer, struct TCP_Server_Info *server) return temp; } +static void _cifs_mid_q_entry_release(struct kref *refcount) +{ + struct mid_q_entry *mid = container_of(refcount, struct mid_q_entry, + refcount); + + mempool_free(mid, cifs_mid_poolp); +} + +void cifs_mid_q_entry_release(struct mid_q_entry *midEntry) +{ + spin_lock(&GlobalMid_Lock); + kref_put(&midEntry->refcount, _cifs_mid_q_entry_release); + spin_unlock(&GlobalMid_Lock); +} + void DeleteMidQEntry(struct mid_q_entry *midEntry) { @@ -110,7 +126,7 @@ DeleteMidQEntry(struct mid_q_entry *midEntry) } } #endif - mempool_free(midEntry, cifs_mid_poolp); + cifs_mid_q_entry_release(midEntry); } void -- cgit v1.2.3 From 27c32b49c3dbfe1e5f57d2b61823bf9474ae0875 Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Sat, 23 Jun 2018 14:52:23 -0300 Subject: cifs: Fix validation of signed data in smb3+ Fixes: c713c8770fa5 ("cifs: push rfc1002 generation down the stack") We failed to validate signed data returned by the server because __cifs_calc_signature() now expects to sign the actual data in iov but we were also passing down the rfc1002 length. Fix smb3_calc_signature() to calculate signature of rfc1002 length prior to passing only the actual data iov[1-N] to __cifs_calc_signature(). In addition, there are a few cases where no rfc1002 length is passed so we make sure there's one (iov_len == 4). Signed-off-by: Paulo Alcantara Reviewed-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/cifs/smb2transport.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/fs/cifs/smb2transport.c b/fs/cifs/smb2transport.c index 50592976dcb4..1af46ca5a951 100644 --- a/fs/cifs/smb2transport.c +++ b/fs/cifs/smb2transport.c @@ -408,12 +408,14 @@ generate_smb311signingkey(struct cifs_ses *ses) int smb3_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server) { - int rc = 0; + int rc; unsigned char smb3_signature[SMB2_CMACAES_SIZE]; unsigned char *sigptr = smb3_signature; struct kvec *iov = rqst->rq_iov; struct smb2_sync_hdr *shdr = (struct smb2_sync_hdr *)iov[0].iov_base; struct cifs_ses *ses; + struct shash_desc *shash = &server->secmech.sdesccmacaes->shash; + struct smb_rqst drqst; ses = smb2_find_smb_ses(server, shdr->SessionId); if (!ses) { @@ -425,8 +427,7 @@ smb3_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server) memset(shdr->Signature, 0x0, SMB2_SIGNATURE_SIZE); rc = crypto_shash_setkey(server->secmech.cmacaes, - ses->smb3signingkey, SMB2_CMACAES_SIZE); - + ses->smb3signingkey, SMB2_CMACAES_SIZE); if (rc) { cifs_dbg(VFS, "%s: Could not set key for cmac aes\n", __func__); return rc; @@ -437,15 +438,33 @@ smb3_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server) * so unlike smb2 case we do not have to check here if secmech are * initialized */ - rc = crypto_shash_init(&server->secmech.sdesccmacaes->shash); + rc = crypto_shash_init(shash); if (rc) { cifs_dbg(VFS, "%s: Could not init cmac aes\n", __func__); return rc; } - rc = __cifs_calc_signature(rqst, server, sigptr, - &server->secmech.sdesccmacaes->shash); + /* + * For SMB2+, __cifs_calc_signature() expects to sign only the actual + * data, that is, iov[0] should not contain a rfc1002 length. + * + * Sign the rfc1002 length prior to passing the data (iov[1-N]) down to + * __cifs_calc_signature(). + */ + drqst = *rqst; + if (drqst.rq_nvec >= 2 && iov[0].iov_len == 4) { + rc = crypto_shash_update(shash, iov[0].iov_base, + iov[0].iov_len); + if (rc) { + cifs_dbg(VFS, "%s: Could not update with payload\n", + __func__); + return rc; + } + drqst.rq_iov++; + drqst.rq_nvec--; + } + rc = __cifs_calc_signature(&drqst, server, sigptr, shash); if (!rc) memcpy(shdr->Signature, sigptr, SMB2_SIGNATURE_SIZE); -- cgit v1.2.3 From 8de8c4608fe9edc046c31bf82b2b7ebc1daae015 Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Sat, 23 Jun 2018 14:52:24 -0300 Subject: cifs: Fix validation of signed data in smb2 Fixes: c713c8770fa5 ("cifs: push rfc1002 generation down the stack") We failed to validate signed data returned by the server because __cifs_calc_signature() now expects to sign the actual data in iov but we were also passing down the rfc1002 length. Fix smb3_calc_signature() to calculate signature of rfc1002 length prior to passing only the actual data iov[1-N] to __cifs_calc_signature(). In addition, there are a few cases where no rfc1002 length is passed so we make sure there's one (iov_len == 4). Signed-off-by: Paulo Alcantara Reviewed-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/cifs/smb2transport.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) diff --git a/fs/cifs/smb2transport.c b/fs/cifs/smb2transport.c index 1af46ca5a951..719d55e63d88 100644 --- a/fs/cifs/smb2transport.c +++ b/fs/cifs/smb2transport.c @@ -173,6 +173,8 @@ smb2_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server) struct kvec *iov = rqst->rq_iov; struct smb2_sync_hdr *shdr = (struct smb2_sync_hdr *)iov[0].iov_base; struct cifs_ses *ses; + struct shash_desc *shash = &server->secmech.sdeschmacsha256->shash; + struct smb_rqst drqst; ses = smb2_find_smb_ses(server, shdr->SessionId); if (!ses) { @@ -190,21 +192,39 @@ smb2_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server) } rc = crypto_shash_setkey(server->secmech.hmacsha256, - ses->auth_key.response, SMB2_NTLMV2_SESSKEY_SIZE); + ses->auth_key.response, SMB2_NTLMV2_SESSKEY_SIZE); if (rc) { cifs_dbg(VFS, "%s: Could not update with response\n", __func__); return rc; } - rc = crypto_shash_init(&server->secmech.sdeschmacsha256->shash); + rc = crypto_shash_init(shash); if (rc) { cifs_dbg(VFS, "%s: Could not init sha256", __func__); return rc; } - rc = __cifs_calc_signature(rqst, server, sigptr, - &server->secmech.sdeschmacsha256->shash); + /* + * For SMB2+, __cifs_calc_signature() expects to sign only the actual + * data, that is, iov[0] should not contain a rfc1002 length. + * + * Sign the rfc1002 length prior to passing the data (iov[1-N]) down to + * __cifs_calc_signature(). + */ + drqst = *rqst; + if (drqst.rq_nvec >= 2 && iov[0].iov_len == 4) { + rc = crypto_shash_update(shash, iov[0].iov_base, + iov[0].iov_len); + if (rc) { + cifs_dbg(VFS, "%s: Could not update with payload\n", + __func__); + return rc; + } + drqst.rq_iov++; + drqst.rq_nvec--; + } + rc = __cifs_calc_signature(&drqst, server, sigptr, shash); if (!rc) memcpy(shdr->Signature, sigptr, SMB2_SIGNATURE_SIZE); -- cgit v1.2.3 From 81f39f951b8098b1c59b01ad10d06d7dc01c7019 Mon Sep 17 00:00:00 2001 From: Ronnie Sahlberg Date: Thu, 28 Jun 2018 10:47:14 +1000 Subject: cifs: fix SMB1 breakage SMB1 mounting broke in commit 35e2cc1ba755 ("cifs: Use correct packet length in SMB2_TRANSFORM header") Fix it and also rename smb2_rqst_len to smb_rqst_len to make it less unobvious that the function is also called from CIFS/SMB1 Good job by Paulo reviewing and cleaning up Ronnie's original patch. Signed-off-by: Ronnie Sahlberg Reviewed-by: Paulo Alcantara Signed-off-by: Steve French --- fs/cifs/smb2ops.c | 2 +- fs/cifs/smb2proto.h | 4 ++-- fs/cifs/smbdirect.c | 5 +++-- fs/cifs/smbdirect.h | 4 ++-- fs/cifs/transport.c | 9 +++++---- 5 files changed, 13 insertions(+), 11 deletions(-) diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index e9216ce88796..04578f6e306b 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -2522,7 +2522,7 @@ smb3_init_transform_rq(struct TCP_Server_Info *server, struct smb_rqst *new_rq, if (!tr_hdr) goto err_free_iov; - orig_len = smb2_rqst_len(old_rq, false); + orig_len = smb_rqst_len(server, old_rq); /* fill the 2nd iov with a transform header */ fill_transform_hdr(tr_hdr, orig_len, old_rq); diff --git a/fs/cifs/smb2proto.h b/fs/cifs/smb2proto.h index 3ae208ac2a77..6e6a4f2ec890 100644 --- a/fs/cifs/smb2proto.h +++ b/fs/cifs/smb2proto.h @@ -113,8 +113,8 @@ extern int smb2_unlock_range(struct cifsFileInfo *cfile, extern int smb2_push_mandatory_locks(struct cifsFileInfo *cfile); extern void smb2_reconnect_server(struct work_struct *work); extern int smb3_crypto_aead_allocate(struct TCP_Server_Info *server); -extern unsigned long -smb2_rqst_len(struct smb_rqst *rqst, bool skip_rfc1002_marker); +extern unsigned long smb_rqst_len(struct TCP_Server_Info *server, + struct smb_rqst *rqst); /* * SMB2 Worker functions - most of protocol specific implementation details diff --git a/fs/cifs/smbdirect.c b/fs/cifs/smbdirect.c index 6fd94d9ffac2..c55ea4e6201b 100644 --- a/fs/cifs/smbdirect.c +++ b/fs/cifs/smbdirect.c @@ -2083,8 +2083,9 @@ int smbd_recv(struct smbd_connection *info, struct msghdr *msg) * rqst: the data to write * return value: 0 if successfully write, otherwise error code */ -int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst) +int smbd_send(struct TCP_Server_Info *server, struct smb_rqst *rqst) { + struct smbd_connection *info = server->smbd_conn; struct kvec vec; int nvecs; int size; @@ -2118,7 +2119,7 @@ int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst) * rq_tailsz to PAGE_SIZE when the buffer has multiple pages and * ends at page boundary */ - buflen = smb2_rqst_len(rqst, true); + buflen = smb_rqst_len(server, rqst); if (buflen + sizeof(struct smbd_data_transfer) > info->max_fragmented_send_size) { diff --git a/fs/cifs/smbdirect.h b/fs/cifs/smbdirect.h index 1e419c21dc60..a11096254f29 100644 --- a/fs/cifs/smbdirect.h +++ b/fs/cifs/smbdirect.h @@ -292,7 +292,7 @@ void smbd_destroy(struct smbd_connection *info); /* Interface for carrying upper layer I/O through send/recv */ int smbd_recv(struct smbd_connection *info, struct msghdr *msg); -int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst); +int smbd_send(struct TCP_Server_Info *server, struct smb_rqst *rqst); enum mr_state { MR_READY, @@ -332,7 +332,7 @@ static inline void *smbd_get_connection( static inline int smbd_reconnect(struct TCP_Server_Info *server) {return -1; } static inline void smbd_destroy(struct smbd_connection *info) {} static inline int smbd_recv(struct smbd_connection *info, struct msghdr *msg) {return -1; } -static inline int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst) {return -1; } +static inline int smbd_send(struct TCP_Server_Info *server, struct smb_rqst *rqst) {return -1; } #endif #endif diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 208ecb830466..a341ec839c83 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -218,14 +218,15 @@ smb_send_kvec(struct TCP_Server_Info *server, struct msghdr *smb_msg, } unsigned long -smb2_rqst_len(struct smb_rqst *rqst, bool skip_rfc1002_marker) +smb_rqst_len(struct TCP_Server_Info *server, struct smb_rqst *rqst) { unsigned int i; struct kvec *iov; int nvec; unsigned long buflen = 0; - if (skip_rfc1002_marker && rqst->rq_iov[0].iov_len == 4) { + if (server->vals->header_preamble_size == 0 && + rqst->rq_nvec >= 2 && rqst->rq_iov[0].iov_len == 4) { iov = &rqst->rq_iov[1]; nvec = rqst->rq_nvec - 1; } else { @@ -276,7 +277,7 @@ __smb_send_rqst(struct TCP_Server_Info *server, int num_rqst, __be32 rfc1002_marker; if (cifs_rdma_enabled(server) && server->smbd_conn) { - rc = smbd_send(server->smbd_conn, rqst); + rc = smbd_send(server, rqst); goto smbd_done; } if (ssocket == NULL) @@ -287,7 +288,7 @@ __smb_send_rqst(struct TCP_Server_Info *server, int num_rqst, (char *)&val, sizeof(val)); for (j = 0; j < num_rqst; j++) - send_length += smb2_rqst_len(&rqst[j], true); + send_length += smb_rqst_len(server, &rqst[j]); rfc1002_marker = cpu_to_be32(send_length); /* Generate a rfc1002 marker for SMB2+ */ -- cgit v1.2.3 From 6aa0c114eceec8cc61715f74a4ce91b048d7561c Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Wed, 4 Jul 2018 14:16:16 -0300 Subject: cifs: Fix memory leak in smb2_set_ea() This patch fixes a memory leak when doing a setxattr(2) in SMB2+. Signed-off-by: Paulo Alcantara Cc: stable@vger.kernel.org Signed-off-by: Steve French Reviewed-by: Aurelien Aptel --- fs/cifs/smb2ops.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index 04578f6e306b..1d5985bd760b 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -856,6 +856,8 @@ smb2_set_ea(const unsigned int xid, struct cifs_tcon *tcon, rc = SMB2_set_ea(xid, tcon, fid.persistent_fid, fid.volatile_fid, ea, len); + kfree(ea); + SMB2_close(xid, tcon, fid.persistent_fid, fid.volatile_fid); return rc; -- cgit v1.2.3 From f46ecbd97f508e68a7806291a139499794874f3d Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Thu, 5 Jul 2018 11:46:42 +0200 Subject: cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE setting A "small" CIFS buffer is not big enough in general to hold a setacl request for SMB2, and we end up overflowing the buffer in send_set_info(). For instance: # mount.cifs //127.0.0.1/test /mnt/test -o username=test,password=test,nounix,cifsacl # touch /mnt/test/acltest # getcifsacl /mnt/test/acltest REVISION:0x1 CONTROL:0x9004 OWNER:S-1-5-21-2926364953-924364008-418108241-1000 GROUP:S-1-22-2-1001 ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff ACL:S-1-22-2-1001:ALLOWED/0x0/R ACL:S-1-22-2-1001:ALLOWED/0x0/R ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff ACL:S-1-1-0:ALLOWED/0x0/R # setcifsacl -a "ACL:S-1-22-2-1004:ALLOWED/0x0/R" /mnt/test/acltest this setacl will cause the following KASAN splat: [ 330.777927] BUG: KASAN: slab-out-of-bounds in send_set_info+0x4dd/0xc20 [cifs] [ 330.779696] Write of size 696 at addr ffff88010d5e2860 by task setcifsacl/1012 [ 330.781882] CPU: 1 PID: 1012 Comm: setcifsacl Not tainted 4.18.0-rc2+ #2 [ 330.783140] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 330.784395] Call Trace: [ 330.784789] dump_stack+0xc2/0x16b [ 330.786777] print_address_description+0x6a/0x270 [ 330.787520] kasan_report+0x258/0x380 [ 330.788845] memcpy+0x34/0x50 [ 330.789369] send_set_info+0x4dd/0xc20 [cifs] [ 330.799511] SMB2_set_acl+0x76/0xa0 [cifs] [ 330.801395] set_smb2_acl+0x7ac/0xf30 [cifs] [ 330.830888] cifs_xattr_set+0x963/0xe40 [cifs] [ 330.840367] __vfs_setxattr+0x84/0xb0 [ 330.842060] __vfs_setxattr_noperm+0xe6/0x370 [ 330.843848] vfs_setxattr+0xc2/0xd0 [ 330.845519] setxattr+0x258/0x320 [ 330.859211] path_setxattr+0x15b/0x1b0 [ 330.864392] __x64_sys_setxattr+0xc0/0x160 [ 330.866133] do_syscall_64+0x14e/0x4b0 [ 330.876631] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 330.878503] RIP: 0033:0x7ff2e507db0a [ 330.880151] Code: 48 8b 0d 89 93 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 bc 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 56 93 2c 00 f7 d8 64 89 01 48 [ 330.885358] RSP: 002b:00007ffdc4903c18 EFLAGS: 00000246 ORIG_RAX: 00000000000000bc [ 330.887733] RAX: ffffffffffffffda RBX: 000055d1170de140 RCX: 00007ff2e507db0a [ 330.890067] RDX: 000055d1170de7d0 RSI: 000055d115b39184 RDI: 00007ffdc4904818 [ 330.892410] RBP: 0000000000000001 R08: 0000000000000000 R09: 000055d1170de7e4 [ 330.894785] R10: 00000000000002b8 R11: 0000000000000246 R12: 0000000000000007 [ 330.897148] R13: 000055d1170de0c0 R14: 0000000000000008 R15: 000055d1170de550 [ 330.901057] Allocated by task 1012: [ 330.902888] kasan_kmalloc+0xa0/0xd0 [ 330.904714] kmem_cache_alloc+0xc8/0x1d0 [ 330.906615] mempool_alloc+0x11e/0x380 [ 330.908496] cifs_small_buf_get+0x35/0x60 [cifs] [ 330.910510] smb2_plain_req_init+0x4a/0xd60 [cifs] [ 330.912551] send_set_info+0x198/0xc20 [cifs] [ 330.914535] SMB2_set_acl+0x76/0xa0 [cifs] [ 330.916465] set_smb2_acl+0x7ac/0xf30 [cifs] [ 330.918453] cifs_xattr_set+0x963/0xe40 [cifs] [ 330.920426] __vfs_setxattr+0x84/0xb0 [ 330.922284] __vfs_setxattr_noperm+0xe6/0x370 [ 330.924213] vfs_setxattr+0xc2/0xd0 [ 330.926008] setxattr+0x258/0x320 [ 330.927762] path_setxattr+0x15b/0x1b0 [ 330.929592] __x64_sys_setxattr+0xc0/0x160 [ 330.931459] do_syscall_64+0x14e/0x4b0 [ 330.933314] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 330.936843] Freed by task 0: [ 330.938588] (stack is not available) [ 330.941886] The buggy address belongs to the object at ffff88010d5e2800 which belongs to the cache cifs_small_rq of size 448 [ 330.946362] The buggy address is located 96 bytes inside of 448-byte region [ffff88010d5e2800, ffff88010d5e29c0) [ 330.950722] The buggy address belongs to the page: [ 330.952789] page:ffffea0004357880 count:1 mapcount:0 mapping:ffff880108fdca80 index:0x0 compound_mapcount: 0 [ 330.955665] flags: 0x17ffffc0008100(slab|head) [ 330.957760] raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff880108fdca80 [ 330.960356] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 330.963005] page dumped because: kasan: bad access detected [ 330.967039] Memory state around the buggy address: [ 330.969255] ffff88010d5e2880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 330.971833] ffff88010d5e2900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 330.974397] >ffff88010d5e2980: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 330.976956] ^ [ 330.979226] ffff88010d5e2a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 330.981755] ffff88010d5e2a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 330.984225] ================================================================== Fix this by allocating a regular CIFS buffer in smb2_plain_req_init() if the request command is SMB2_SET_INFO. Reported-by: Jianhong Yin Fixes: 366ed846df60 ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function") CC: Stable Signed-off-by: Stefano Brivio Reviewed-and-tested-by: Aurelien Aptel Signed-off-by: Steve French --- fs/cifs/smb2pdu.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 810b85787c91..dbfb83ae6137 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -340,7 +340,10 @@ smb2_plain_req_init(__le16 smb2_command, struct cifs_tcon *tcon, return rc; /* BB eventually switch this to SMB2 specific small buf size */ - *request_buf = cifs_small_buf_get(); + if (smb2_command == SMB2_SET_INFO) + *request_buf = cifs_buf_get(); + else + *request_buf = cifs_small_buf_get(); if (*request_buf == NULL) { /* BB should we add a retry in here if not a writepage? */ return -ENOMEM; @@ -3720,7 +3723,7 @@ send_set_info(const unsigned int xid, struct cifs_tcon *tcon, rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); - cifs_small_buf_release(req); + cifs_buf_release(req); rsp = (struct smb2_set_info_rsp *)rsp_iov.iov_base; if (rc != 0) { -- cgit v1.2.3 From 7ffbe65578b44fafdef577a360eb0583929f7c6e Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Thu, 5 Jul 2018 13:46:34 -0300 Subject: cifs: Fix infinite loop when using hard mount option For every request we send, whether it is SMB1 or SMB2+, we attempt to reconnect tcon (cifs_reconnect_tcon or smb2_reconnect) before carrying out the request. So, while server->tcpStatus != CifsNeedReconnect, we wait for the reconnection to succeed on wait_event_interruptible_timeout(). If it returns, that means that either the condition was evaluated to true, or timeout elapsed, or it was interrupted by a signal. Since we're not handling the case where the process woke up due to a received signal (-ERESTARTSYS), the next call to wait_event_interruptible_timeout() will _always_ fail and we end up looping forever inside either cifs_reconnect_tcon() or smb2_reconnect(). Here's an example of how to trigger that: $ mount.cifs //foo/share /mnt/test -o username=foo,password=foo,vers=1.0,hard (break connection to server before executing bellow cmd) $ stat -f /mnt/test & sleep 140 [1] 2511 $ ps -aux -q 2511 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 2511 0.0 0.0 12892 1008 pts/0 S 12:24 0:00 stat -f /mnt/test $ kill -9 2511 (wait for a while; process is stuck in the kernel) $ ps -aux -q 2511 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 2511 83.2 0.0 12892 1008 pts/0 R 12:24 30:01 stat -f /mnt/test By using 'hard' mount point means that cifs.ko will keep retrying indefinitely, however we must allow the process to be killed otherwise it would hang the system. Signed-off-by: Paulo Alcantara Cc: stable@vger.kernel.org Reviewed-by: Aurelien Aptel Signed-off-by: Steve French --- fs/cifs/cifssmb.c | 10 ++++++++-- fs/cifs/smb2pdu.c | 18 ++++++++++++------ 2 files changed, 20 insertions(+), 8 deletions(-) diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index d352da325de3..93408eab92e7 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -157,8 +157,14 @@ cifs_reconnect_tcon(struct cifs_tcon *tcon, int smb_command) * greater than cifs socket timeout which is 7 seconds */ while (server->tcpStatus == CifsNeedReconnect) { - wait_event_interruptible_timeout(server->response_q, - (server->tcpStatus != CifsNeedReconnect), 10 * HZ); + rc = wait_event_interruptible_timeout(server->response_q, + (server->tcpStatus != CifsNeedReconnect), + 10 * HZ); + if (rc < 0) { + cifs_dbg(FYI, "%s: aborting reconnect due to a received" + " signal by the process\n", __func__); + return -ERESTARTSYS; + } /* are we still trying to reconnect? */ if (server->tcpStatus != CifsNeedReconnect) diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index dbfb83ae6137..e31375ecaa6f 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -155,7 +155,7 @@ out: static int smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon) { - int rc = 0; + int rc; struct nls_table *nls_codepage; struct cifs_ses *ses; struct TCP_Server_Info *server; @@ -166,10 +166,10 @@ smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon) * for those three - in the calling routine. */ if (tcon == NULL) - return rc; + return 0; if (smb2_command == SMB2_TREE_CONNECT) - return rc; + return 0; if (tcon->tidStatus == CifsExiting) { /* @@ -212,8 +212,14 @@ smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon) return -EAGAIN; } - wait_event_interruptible_timeout(server->response_q, - (server->tcpStatus != CifsNeedReconnect), 10 * HZ); + rc = wait_event_interruptible_timeout(server->response_q, + (server->tcpStatus != CifsNeedReconnect), + 10 * HZ); + if (rc < 0) { + cifs_dbg(FYI, "%s: aborting reconnect due to a received" + " signal by the process\n", __func__); + return -ERESTARTSYS; + } /* are we still trying to reconnect? */ if (server->tcpStatus != CifsNeedReconnect) @@ -231,7 +237,7 @@ smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon) } if (!tcon->ses->need_reconnect && !tcon->need_reconnect) - return rc; + return 0; nls_codepage = load_nls_default(); -- cgit v1.2.3 From 729c0c9dd55204f0c9a823ac8a7bfa83d36c7e78 Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Thu, 5 Jul 2018 15:10:02 +0200 Subject: cifs: Fix stack out-of-bounds in smb{2,3}_create_lease_buf() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit smb{2,3}_create_lease_buf() store a lease key in the lease context for later usage on a lease break. In most paths, the key is currently sourced from data that happens to be on the stack near local variables for oplock in SMB2_open() callers, e.g. from open_shroot(), whereas smb2_open_file() properly allocates space on its stack for it. The address of those local variables holding the oplock is then passed to create_lease_buf handlers via SMB2_open(), and 16 bytes near oplock are used. This causes a stack out-of-bounds access as reported by KASAN on SMB2.1 and SMB3 mounts (first out-of-bounds access is shown here): [ 111.528823] BUG: KASAN: stack-out-of-bounds in smb3_create_lease_buf+0x399/0x3b0 [cifs] [ 111.530815] Read of size 8 at addr ffff88010829f249 by task mount.cifs/985 [ 111.532838] CPU: 3 PID: 985 Comm: mount.cifs Not tainted 4.18.0-rc3+ #91 [ 111.534656] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 111.536838] Call Trace: [ 111.537528] dump_stack+0xc2/0x16b [ 111.540890] print_address_description+0x6a/0x270 [ 111.542185] kasan_report+0x258/0x380 [ 111.544701] smb3_create_lease_buf+0x399/0x3b0 [cifs] [ 111.546134] SMB2_open+0x1ef8/0x4b70 [cifs] [ 111.575883] open_shroot+0x339/0x550 [cifs] [ 111.591969] smb3_qfs_tcon+0x32c/0x1e60 [cifs] [ 111.617405] cifs_mount+0x4f3/0x2fc0 [cifs] [ 111.674332] cifs_smb3_do_mount+0x263/0xf10 [cifs] [ 111.677915] mount_fs+0x55/0x2b0 [ 111.679504] vfs_kern_mount.part.22+0xaa/0x430 [ 111.684511] do_mount+0xc40/0x2660 [ 111.698301] ksys_mount+0x80/0xd0 [ 111.701541] do_syscall_64+0x14e/0x4b0 [ 111.711807] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 111.713665] RIP: 0033:0x7f372385b5fa [ 111.715311] Code: 48 8b 0d 99 78 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 66 78 2c 00 f7 d8 64 89 01 48 [ 111.720330] RSP: 002b:00007ffff27049d8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 111.722601] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f372385b5fa [ 111.724842] RDX: 000055c2ecdc73b2 RSI: 000055c2ecdc73f9 RDI: 00007ffff270580f [ 111.727083] RBP: 00007ffff2705804 R08: 000055c2ee976060 R09: 0000000000001000 [ 111.729319] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f3723f4d000 [ 111.731615] R13: 000055c2ee976060 R14: 00007f3723f4f90f R15: 0000000000000000 [ 111.735448] The buggy address belongs to the page: [ 111.737420] page:ffffea000420a7c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 111.739890] flags: 0x17ffffc0000000() [ 111.741750] raw: 0017ffffc0000000 0000000000000000 dead000000000200 0000000000000000 [ 111.744216] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 111.746679] page dumped because: kasan: bad access detected [ 111.750482] Memory state around the buggy address: [ 111.752562] ffff88010829f100: 00 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 00 [ 111.754991] ffff88010829f180: 00 00 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 [ 111.757401] >ffff88010829f200: 00 00 00 00 00 f1 f1 f1 f1 01 f2 f2 f2 f2 f2 f2 [ 111.759801] ^ [ 111.762034] ffff88010829f280: f2 02 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 [ 111.764486] ffff88010829f300: f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 111.766913] ================================================================== Lease keys are however already generated and stored in fid data on open and create paths: pass them down to the lease context creation handlers and use them. Suggested-by: Aurélien Aptel Reviewed-by: Aurelien Aptel Fixes: b8c32dbb0deb ("CIFS: Request SMB2.1 leases") Signed-off-by: Stefano Brivio Signed-off-by: Steve French --- fs/cifs/cifsglob.h | 2 +- fs/cifs/smb2file.c | 11 ++++------- fs/cifs/smb2ops.c | 9 +++------ fs/cifs/smb2pdu.c | 7 ++++--- fs/cifs/smb2pdu.h | 6 ++---- 5 files changed, 14 insertions(+), 21 deletions(-) diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index a2962fd41c6f..c923c7854027 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -423,7 +423,7 @@ struct smb_version_operations { void (*set_oplock_level)(struct cifsInodeInfo *, __u32, unsigned int, bool *); /* create lease context buffer for CREATE request */ - char * (*create_lease_buf)(u8 *, u8); + char * (*create_lease_buf)(u8 *lease_key, u8 oplock); /* parse lease context buffer and return oplock/epoch info */ __u8 (*parse_lease_buf)(void *buf, unsigned int *epoch, char *lkey); ssize_t (*copychunk_range)(const unsigned int, diff --git a/fs/cifs/smb2file.c b/fs/cifs/smb2file.c index 788412675723..4ed10dd086e6 100644 --- a/fs/cifs/smb2file.c +++ b/fs/cifs/smb2file.c @@ -41,7 +41,7 @@ smb2_open_file(const unsigned int xid, struct cifs_open_parms *oparms, int rc; __le16 *smb2_path; struct smb2_file_all_info *smb2_data = NULL; - __u8 smb2_oplock[17]; + __u8 smb2_oplock; struct cifs_fid *fid = oparms->fid; struct network_resiliency_req nr_ioctl_req; @@ -59,12 +59,9 @@ smb2_open_file(const unsigned int xid, struct cifs_open_parms *oparms, } oparms->desired_access |= FILE_READ_ATTRIBUTES; - *smb2_oplock = SMB2_OPLOCK_LEVEL_BATCH; + smb2_oplock = SMB2_OPLOCK_LEVEL_BATCH; - if (oparms->tcon->ses->server->capabilities & SMB2_GLOBAL_CAP_LEASING) - memcpy(smb2_oplock + 1, fid->lease_key, SMB2_LEASE_KEY_SIZE); - - rc = SMB2_open(xid, oparms, smb2_path, smb2_oplock, smb2_data, NULL, + rc = SMB2_open(xid, oparms, smb2_path, &smb2_oplock, smb2_data, NULL, NULL); if (rc) goto out; @@ -101,7 +98,7 @@ smb2_open_file(const unsigned int xid, struct cifs_open_parms *oparms, move_smb2_info_to_cifs(buf, smb2_data); } - *oplock = *smb2_oplock; + *oplock = smb2_oplock; out: kfree(smb2_data); kfree(smb2_path); diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index 1d5985bd760b..ea92a38b2f08 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -2222,8 +2222,7 @@ smb2_create_lease_buf(u8 *lease_key, u8 oplock) if (!buf) return NULL; - buf->lcontext.LeaseKeyLow = cpu_to_le64(*((u64 *)lease_key)); - buf->lcontext.LeaseKeyHigh = cpu_to_le64(*((u64 *)(lease_key + 8))); + memcpy(&buf->lcontext.LeaseKey, lease_key, SMB2_LEASE_KEY_SIZE); buf->lcontext.LeaseState = map_oplock_to_lease(oplock); buf->ccontext.DataOffset = cpu_to_le16(offsetof @@ -2249,8 +2248,7 @@ smb3_create_lease_buf(u8 *lease_key, u8 oplock) if (!buf) return NULL; - buf->lcontext.LeaseKeyLow = cpu_to_le64(*((u64 *)lease_key)); - buf->lcontext.LeaseKeyHigh = cpu_to_le64(*((u64 *)(lease_key + 8))); + memcpy(&buf->lcontext.LeaseKey, lease_key, SMB2_LEASE_KEY_SIZE); buf->lcontext.LeaseState = map_oplock_to_lease(oplock); buf->ccontext.DataOffset = cpu_to_le16(offsetof @@ -2287,8 +2285,7 @@ smb3_parse_lease_buf(void *buf, unsigned int *epoch, char *lease_key) if (lc->lcontext.LeaseFlags & SMB2_LEASE_FLAG_BREAK_IN_PROGRESS) return SMB2_OPLOCK_LEVEL_NOCHANGE; if (lease_key) - memcpy(lease_key, &lc->lcontext.LeaseKeyLow, - SMB2_LEASE_KEY_SIZE); + memcpy(lease_key, &lc->lcontext.LeaseKey, SMB2_LEASE_KEY_SIZE); return le32_to_cpu(lc->lcontext.LeaseState); } diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index e31375ecaa6f..3c92678cb45b 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -1716,12 +1716,12 @@ parse_lease_state(struct TCP_Server_Info *server, struct smb2_create_rsp *rsp, static int add_lease_context(struct TCP_Server_Info *server, struct kvec *iov, - unsigned int *num_iovec, __u8 *oplock) + unsigned int *num_iovec, u8 *lease_key, __u8 *oplock) { struct smb2_create_req *req = iov[0].iov_base; unsigned int num = *num_iovec; - iov[num].iov_base = server->ops->create_lease_buf(oplock+1, *oplock); + iov[num].iov_base = server->ops->create_lease_buf(lease_key, *oplock); if (iov[num].iov_base == NULL) return -ENOMEM; iov[num].iov_len = server->vals->create_lease_size; @@ -2181,7 +2181,8 @@ SMB2_open(const unsigned int xid, struct cifs_open_parms *oparms, __le16 *path, *oplock == SMB2_OPLOCK_LEVEL_NONE) req->RequestedOplockLevel = *oplock; else { - rc = add_lease_context(server, iov, &n_iov, oplock); + rc = add_lease_context(server, iov, &n_iov, + oparms->fid->lease_key, oplock); if (rc) { cifs_small_buf_release(req); kfree(copy_path); diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h index 824dddeee3f2..a671adcc44a6 100644 --- a/fs/cifs/smb2pdu.h +++ b/fs/cifs/smb2pdu.h @@ -678,16 +678,14 @@ struct create_context { #define SMB2_LEASE_KEY_SIZE 16 struct lease_context { - __le64 LeaseKeyLow; - __le64 LeaseKeyHigh; + u8 LeaseKey[SMB2_LEASE_KEY_SIZE]; __le32 LeaseState; __le32 LeaseFlags; __le64 LeaseDuration; } __packed; struct lease_context_v2 { - __le64 LeaseKeyLow; - __le64 LeaseKeyHigh; + u8 LeaseKey[SMB2_LEASE_KEY_SIZE]; __le32 LeaseState; __le32 LeaseFlags; __le64 LeaseDuration; -- cgit v1.2.3 From 7ec916f82c48dcfc115eee2e3e0e6d400e310fc5 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 5 Jul 2018 13:29:55 -0600 Subject: Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent()" This commit may cause a less than required dma mask to be used for some allocations, which apparently leads to module load failures for iwlwifi sometimes. This reverts commit d657c5c73ca987214a6f9436e435b34fc60f332a. Signed-off-by: Christoph Hellwig Reported-by: Fabio Coatti Tested-by: Fabio Coatti --- drivers/iommu/Kconfig | 1 - drivers/iommu/intel-iommu.c | 62 +++++++++++++++++++++++++++++++++------------ 2 files changed, 46 insertions(+), 17 deletions(-) diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index e055d228bfb9..689ffe538370 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -142,7 +142,6 @@ config DMAR_TABLE config INTEL_IOMMU bool "Support for Intel IOMMU using DMA Remapping Devices" depends on PCI_MSI && ACPI && (X86 || IA64_GENERIC) - select DMA_DIRECT_OPS select IOMMU_API select IOMMU_IOVA select NEED_DMA_MAP_STATE diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index 14e4b3722428..b344a883f116 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include #include @@ -3713,30 +3712,61 @@ static void *intel_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags, unsigned long attrs) { - void *vaddr; + struct page *page = NULL; + int order; - vaddr = dma_direct_alloc(dev, size, dma_handle, flags, attrs); - if (iommu_no_mapping(dev) || !vaddr) - return vaddr; + size = PAGE_ALIGN(size); + order = get_order(size); - *dma_handle = __intel_map_single(dev, virt_to_phys(vaddr), - PAGE_ALIGN(size), DMA_BIDIRECTIONAL, - dev->coherent_dma_mask); - if (!*dma_handle) - goto out_free_pages; - return vaddr; + if (!iommu_no_mapping(dev)) + flags &= ~(GFP_DMA | GFP_DMA32); + else if (dev->coherent_dma_mask < dma_get_required_mask(dev)) { + if (dev->coherent_dma_mask < DMA_BIT_MASK(32)) + flags |= GFP_DMA; + else + flags |= GFP_DMA32; + } + + if (gfpflags_allow_blocking(flags)) { + unsigned int count = size >> PAGE_SHIFT; + + page = dma_alloc_from_contiguous(dev, count, order, flags); + if (page && iommu_no_mapping(dev) && + page_to_phys(page) + size > dev->coherent_dma_mask) { + dma_release_from_contiguous(dev, page, count); + page = NULL; + } + } + + if (!page) + page = alloc_pages(flags, order); + if (!page) + return NULL; + memset(page_address(page), 0, size); + + *dma_handle = __intel_map_single(dev, page_to_phys(page), size, + DMA_BIDIRECTIONAL, + dev->coherent_dma_mask); + if (*dma_handle) + return page_address(page); + if (!dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT)) + __free_pages(page, order); -out_free_pages: - dma_direct_free(dev, size, vaddr, *dma_handle, attrs); return NULL; } static void intel_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle, unsigned long attrs) { - if (!iommu_no_mapping(dev)) - intel_unmap(dev, dma_handle, PAGE_ALIGN(size)); - dma_direct_free(dev, size, vaddr, dma_handle, attrs); + int order; + struct page *page = virt_to_page(vaddr); + + size = PAGE_ALIGN(size); + order = get_order(size); + + intel_unmap(dev, dma_handle, size); + if (!dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT)) + __free_pages(page, order); } static void intel_unmap_sg(struct device *dev, struct scatterlist *sglist, -- cgit v1.2.3 From 0fa3ecd87848c9c93c2c828ef4c3a8ca36ce46c7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 3 Jul 2018 17:10:19 -0700 Subject: Fix up non-directory creation in SGID directories sgid directories have special semantics, making newly created files in the directory belong to the group of the directory, and newly created subdirectories will also become sgid. This is historically used for group-shared directories. But group directories writable by non-group members should not imply that such non-group members can magically join the group, so make sure to clear the sgid bit on non-directories for non-members (but remember that sgid without group execute means "mandatory locking", just to confuse things even more). Reported-by: Jann Horn Cc: Andy Lutomirski Cc: Al Viro Signed-off-by: Linus Torvalds --- fs/inode.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/inode.c b/fs/inode.c index 2c300e981796..8c86c809ca17 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -1999,8 +1999,14 @@ void inode_init_owner(struct inode *inode, const struct inode *dir, inode->i_uid = current_fsuid(); if (dir && dir->i_mode & S_ISGID) { inode->i_gid = dir->i_gid; + + /* Directories are special, and always inherit S_ISGID */ if (S_ISDIR(mode)) mode |= S_ISGID; + else if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP) && + !in_group_p(inode->i_gid) && + !capable_wrt_inode_uidgid(dir, CAP_FSETID)) + mode &= ~S_ISGID; } else inode->i_gid = current_fsgid(); inode->i_mode = mode; -- cgit v1.2.3 From 523402fa9101090c91d2033b7ebdfdcf65880488 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Thu, 5 Jul 2018 14:37:52 -0700 Subject: MIPS: Fix ioremap() RAM check We currently attempt to check whether a physical address range provided to __ioremap() may be in use by the page allocator by examining the value of PageReserved for each page in the region - lowmem pages not marked reserved are presumed to be in use by the page allocator, and requests to ioremap them fail. The way we check this has been broken since commit 92923ca3aace ("mm: meminit: only set page reserved in the memblock region"), because memblock will typically not have any knowledge of non-RAM pages and therefore those pages will not have the PageReserved flag set. Thus when we attempt to ioremap a region outside of RAM we incorrectly fail believing that the region is RAM that may be in use. In most cases ioremap() on MIPS will take a fast-path to use the unmapped kseg1 or xkphys virtual address spaces and never hit this path, so the only way to hit it is for a MIPS32 system to attempt to ioremap() an address range in lowmem with flags other than _CACHE_UNCACHED. Perhaps the most straightforward way to do this is using ioremap_uncached_accelerated(), which is how the problem was discovered. Fix this by making use of walk_system_ram_range() to test the address range provided to __ioremap() against only RAM pages, rather than all lowmem pages. This means that if we have a lowmem I/O region, which is very common for MIPS systems, we're free to ioremap() address ranges within it. A nice bonus is that the test is no longer limited to lowmem. The approach here matches the way x86 performed the same test after commit c81c8a1eeede ("x86, ioremap: Speed up check for RAM pages") until x86 moved towards a slightly more complicated check using walk_mem_res() for unrelated reasons with commit 0e4c12b45aa8 ("x86/mm, resource: Use PAGE_KERNEL protection for ioremap of memory pages"). Signed-off-by: Paul Burton Reported-by: Serge Semin Tested-by: Serge Semin Fixes: 92923ca3aace ("mm: meminit: only set page reserved in the memblock region") Cc: James Hogan Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.2+ Patchwork: https://patchwork.linux-mips.org/patch/19786/ --- arch/mips/mm/ioremap.c | 37 +++++++++++++++++++++++++------------ 1 file changed, 25 insertions(+), 12 deletions(-) diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c index 1986e09fb457..1601d90b087b 100644 --- a/arch/mips/mm/ioremap.c +++ b/arch/mips/mm/ioremap.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -98,6 +99,20 @@ static int remap_area_pages(unsigned long address, phys_addr_t phys_addr, return error; } +static int __ioremap_check_ram(unsigned long start_pfn, unsigned long nr_pages, + void *arg) +{ + unsigned long i; + + for (i = 0; i < nr_pages; i++) { + if (pfn_valid(start_pfn + i) && + !PageReserved(pfn_to_page(start_pfn + i))) + return 1; + } + + return 0; +} + /* * Generic mapping function (not visible outside): */ @@ -116,8 +131,8 @@ static int remap_area_pages(unsigned long address, phys_addr_t phys_addr, void __iomem * __ioremap(phys_addr_t phys_addr, phys_addr_t size, unsigned long flags) { + unsigned long offset, pfn, last_pfn; struct vm_struct * area; - unsigned long offset; phys_addr_t last_addr; void * addr; @@ -137,18 +152,16 @@ void __iomem * __ioremap(phys_addr_t phys_addr, phys_addr_t size, unsigned long return (void __iomem *) CKSEG1ADDR(phys_addr); /* - * Don't allow anybody to remap normal RAM that we're using.. + * Don't allow anybody to remap RAM that may be allocated by the page + * allocator, since that could lead to races & data clobbering. */ - if (phys_addr < virt_to_phys(high_memory)) { - char *t_addr, *t_end; - struct page *page; - - t_addr = __va(phys_addr); - t_end = t_addr + (size - 1); - - for(page = virt_to_page(t_addr); page <= virt_to_page(t_end); page++) - if(!PageReserved(page)) - return NULL; + pfn = PFN_DOWN(phys_addr); + last_pfn = PFN_DOWN(last_addr); + if (walk_system_ram_range(pfn, last_pfn - pfn + 1, NULL, + __ioremap_check_ram) == 1) { + WARN_ONCE(1, "ioremap on RAM at %pa - %pa\n", + &phys_addr, &last_addr); + return NULL; } /* -- cgit v1.2.3 From 7481a8576ad87ac92526a931c0cd5733db7c1250 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Mon, 2 Jul 2018 20:13:15 +0200 Subject: liquidio: make timeout HZ independent and readable schedule_timeout_* takes a timeout in jiffies but the code currently is passing in a constant which makes this timeout HZ dependent. So define a constant with (hopefully) meaningful name and pass it through msecs_to_jiffies() to fix the HZ dependency. Signed-off-by: Nicholas Mc Guire commit f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters") Acked-by: Derek Chickles Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/liquidio/lio_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/cavium/liquidio/lio_main.c b/drivers/net/ethernet/cavium/liquidio/lio_main.c index 8a815bb57177..7e8454d3b1ad 100644 --- a/drivers/net/ethernet/cavium/liquidio/lio_main.c +++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c @@ -91,6 +91,9 @@ static int octeon_console_debug_enabled(u32 console) */ #define LIO_SYNC_OCTEON_TIME_INTERVAL_MS 60000 +/* time to wait for possible in-flight requests in milliseconds */ +#define WAIT_INFLIGHT_REQUEST msecs_to_jiffies(1000) + struct lio_trusted_vf_ctx { struct completion complete; int status; @@ -259,7 +262,7 @@ static inline void pcierror_quiesce_device(struct octeon_device *oct) force_io_queues_off(oct); /* To allow for in-flight requests */ - schedule_timeout_uninterruptible(100); + schedule_timeout_uninterruptible(WAIT_INFLIGHT_REQUEST); if (wait_for_pending_requests(oct)) dev_err(&oct->pci_dev->dev, "There were pending requests\n"); -- cgit v1.2.3 From 96f1206d10c63df64260be94536474a1b904f356 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Thu, 5 Jul 2018 13:56:44 +0200 Subject: MAINTAINERS: update my email address The mail server hosting the old address is going to fade out. Time to update to an address I control directly. Signed-off-by: Stefan Schmidt Signed-off-by: David S. Miller --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 34738d054f8d..0bf83d50aaba 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2523,7 +2523,7 @@ S: Supported F: drivers/scsi/esas2r ATUSB IEEE 802.15.4 RADIO DRIVER -M: Stefan Schmidt +M: Stefan Schmidt L: linux-wpan@vger.kernel.org S: Maintained F: drivers/net/ieee802154/atusb.c @@ -6908,7 +6908,7 @@ F: drivers/clk/clk-versaclock5.c IEEE 802.15.4 SUBSYSTEM M: Alexander Aring -M: Stefan Schmidt +M: Stefan Schmidt L: linux-wpan@vger.kernel.org W: http://wpan.cakelab.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan.git -- cgit v1.2.3 From 94b3b542303f3055c326df74ef144a8a790d7d7f Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 5 Jul 2018 17:01:09 +0300 Subject: net: aquantia: vlan unicast address list correct handling Setting up macvlan/macvtap networks over atlantic NIC results in no traffic over these networks because ndo_set_rx_mode did not listed UC MACs as registered in unicast filter. Here we fix that taking into account maximum number of UC filters supported by hardware. If more than MAX addresses were registered, we just enable promisc and/or allmulti to pass the traffic in. We also remove MULTICAST_ADDRESS_MAX constant from aq_cfg since thats not a configurable parameter at all. Fixes: b21f502 ("net:ethernet:aquantia: Fix for multicast filter handling.") Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_cfg.h | 2 - drivers/net/ethernet/aquantia/atlantic/aq_hw.h | 4 +- drivers/net/ethernet/aquantia/atlantic/aq_main.c | 11 +---- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 47 +++++++++++++--------- drivers/net/ethernet/aquantia/atlantic/aq_nic.h | 2 +- .../ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c | 2 +- .../ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 4 +- 7 files changed, 36 insertions(+), 36 deletions(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h b/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h index fc7383106946..91eb8910b1c9 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h @@ -63,8 +63,6 @@ #define AQ_CFG_NAPI_WEIGHT 64U -#define AQ_CFG_MULTICAST_ADDRESS_MAX 32U - /*#define AQ_CFG_MAC_ADDR_PERMANENT {0x30, 0x0E, 0xE3, 0x12, 0x34, 0x56}*/ #define AQ_NIC_FC_OFF 0U diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h index a2d416b24ffc..2c6ebd91a9f2 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h @@ -98,6 +98,8 @@ struct aq_stats_s { #define AQ_HW_MEDIA_TYPE_TP 1U #define AQ_HW_MEDIA_TYPE_FIBRE 2U +#define AQ_HW_MULTICAST_ADDRESS_MAX 32U + struct aq_hw_s { atomic_t flags; u8 rbl_enabled:1; @@ -177,7 +179,7 @@ struct aq_hw_ops { unsigned int packet_filter); int (*hw_multicast_list_set)(struct aq_hw_s *self, - u8 ar_mac[AQ_CFG_MULTICAST_ADDRESS_MAX] + u8 ar_mac[AQ_HW_MULTICAST_ADDRESS_MAX] [ETH_ALEN], u32 count); diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_main.c b/drivers/net/ethernet/aquantia/atlantic/aq_main.c index ba5fe8c4125d..e3ae29e523f0 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_main.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_main.c @@ -135,17 +135,10 @@ err_exit: static void aq_ndev_set_multicast_settings(struct net_device *ndev) { struct aq_nic_s *aq_nic = netdev_priv(ndev); - int err = 0; - err = aq_nic_set_packet_filter(aq_nic, ndev->flags); - if (err < 0) - return; + aq_nic_set_packet_filter(aq_nic, ndev->flags); - if (netdev_mc_count(ndev)) { - err = aq_nic_set_multicast_list(aq_nic, ndev); - if (err < 0) - return; - } + aq_nic_set_multicast_list(aq_nic, ndev); } static const struct net_device_ops aq_ndev_ops = { diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index 1a1a6380c128..7a22d0257e04 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -563,34 +563,41 @@ err_exit: int aq_nic_set_multicast_list(struct aq_nic_s *self, struct net_device *ndev) { + unsigned int packet_filter = self->packet_filter; struct netdev_hw_addr *ha = NULL; unsigned int i = 0U; - self->mc_list.count = 0U; - - netdev_for_each_mc_addr(ha, ndev) { - ether_addr_copy(self->mc_list.ar[i++], ha->addr); - ++self->mc_list.count; + self->mc_list.count = 0; + if (netdev_uc_count(ndev) > AQ_HW_MULTICAST_ADDRESS_MAX) { + packet_filter |= IFF_PROMISC; + } else { + netdev_for_each_uc_addr(ha, ndev) { + ether_addr_copy(self->mc_list.ar[i++], ha->addr); - if (i >= AQ_CFG_MULTICAST_ADDRESS_MAX) - break; + if (i >= AQ_HW_MULTICAST_ADDRESS_MAX) + break; + } } - if (i >= AQ_CFG_MULTICAST_ADDRESS_MAX) { - /* Number of filters is too big: atlantic does not support this. - * Force all multi filter to support this. - * With this we disable all UC filters and setup "all pass" - * multicast mask - */ - self->packet_filter |= IFF_ALLMULTI; - self->aq_nic_cfg.mc_list_count = 0; - return self->aq_hw_ops->hw_packet_filter_set(self->aq_hw, - self->packet_filter); + if (i + netdev_mc_count(ndev) > AQ_HW_MULTICAST_ADDRESS_MAX) { + packet_filter |= IFF_ALLMULTI; } else { - return self->aq_hw_ops->hw_multicast_list_set(self->aq_hw, - self->mc_list.ar, - self->mc_list.count); + netdev_for_each_mc_addr(ha, ndev) { + ether_addr_copy(self->mc_list.ar[i++], ha->addr); + + if (i >= AQ_HW_MULTICAST_ADDRESS_MAX) + break; + } + } + + if (i > 0 && i < AQ_HW_MULTICAST_ADDRESS_MAX) { + packet_filter |= IFF_MULTICAST; + self->mc_list.count = i; + self->aq_hw_ops->hw_multicast_list_set(self->aq_hw, + self->mc_list.ar, + self->mc_list.count); } + return aq_nic_set_packet_filter(self, packet_filter); } int aq_nic_set_mtu(struct aq_nic_s *self, int new_mtu) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h index faa533a0ec47..fecfc401f95d 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h @@ -75,7 +75,7 @@ struct aq_nic_s { struct aq_hw_link_status_s link_status; struct { u32 count; - u8 ar[AQ_CFG_MULTICAST_ADDRESS_MAX][ETH_ALEN]; + u8 ar[AQ_HW_MULTICAST_ADDRESS_MAX][ETH_ALEN]; } mc_list; struct pci_dev *pdev; diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c index 67e2f9fb9402..8cc6abadc03b 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c @@ -765,7 +765,7 @@ static int hw_atl_a0_hw_packet_filter_set(struct aq_hw_s *self, static int hw_atl_a0_hw_multicast_list_set(struct aq_hw_s *self, u8 ar_mac - [AQ_CFG_MULTICAST_ADDRESS_MAX] + [AQ_HW_MULTICAST_ADDRESS_MAX] [ETH_ALEN], u32 count) { diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 819f6bcf9b4e..956860a69797 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -784,7 +784,7 @@ static int hw_atl_b0_hw_packet_filter_set(struct aq_hw_s *self, static int hw_atl_b0_hw_multicast_list_set(struct aq_hw_s *self, u8 ar_mac - [AQ_CFG_MULTICAST_ADDRESS_MAX] + [AQ_HW_MULTICAST_ADDRESS_MAX] [ETH_ALEN], u32 count) { @@ -812,7 +812,7 @@ static int hw_atl_b0_hw_multicast_list_set(struct aq_hw_s *self, hw_atl_rpfl2_uc_flr_en_set(self, (self->aq_nic_cfg->is_mc_list_enabled), - HW_ATL_B0_MAC_MIN + i); + HW_ATL_B0_MAC_MIN + i); } err = aq_hw_err_from_flags(self); -- cgit v1.2.3 From 33cc2c9667561b224215e6dfb5bf98e8fa17914e Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 5 Jul 2018 14:58:49 -0700 Subject: acpi, nfit: Fix scrub idle detection The notification of scrub completion happens within the scrub workqueue. That can clearly race someone running scrub_show() and work_busy() before the workqueue has a chance to flush the recently completed work. Add a flag to reliably indicate the idle vs busy state. Without this change applications using poll(2) to wait for scrub-completion may falsely wakeup and read ARS as being busy even though the thread is going idle and then hang indefinitely. Fixes: bc6ba8085842 ("nfit, address-range-scrub: rework and simplify ARS...") Cc: Reported-by: Vishal Verma Tested-by: Vishal Verma Reported-by: Lukasz Dorau Signed-off-by: Dan Williams --- drivers/acpi/nfit/core.c | 44 +++++++++++++++++++++++++++++++++----------- drivers/acpi/nfit/nfit.h | 1 + 2 files changed, 34 insertions(+), 11 deletions(-) diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c index 471402cee1f1..b8040fed2a69 100644 --- a/drivers/acpi/nfit/core.c +++ b/drivers/acpi/nfit/core.c @@ -1275,7 +1275,7 @@ static ssize_t scrub_show(struct device *dev, mutex_lock(&acpi_desc->init_mutex); rc = sprintf(buf, "%d%s", acpi_desc->scrub_count, - work_busy(&acpi_desc->dwork.work) + acpi_desc->scrub_busy && !acpi_desc->cancel ? "+\n" : "\n"); mutex_unlock(&acpi_desc->init_mutex); } @@ -2941,6 +2941,32 @@ static unsigned int __acpi_nfit_scrub(struct acpi_nfit_desc *acpi_desc, return 0; } +static void __sched_ars(struct acpi_nfit_desc *acpi_desc, unsigned int tmo) +{ + lockdep_assert_held(&acpi_desc->init_mutex); + + acpi_desc->scrub_busy = 1; + /* note this should only be set from within the workqueue */ + if (tmo) + acpi_desc->scrub_tmo = tmo; + queue_delayed_work(nfit_wq, &acpi_desc->dwork, tmo * HZ); +} + +static void sched_ars(struct acpi_nfit_desc *acpi_desc) +{ + __sched_ars(acpi_desc, 0); +} + +static void notify_ars_done(struct acpi_nfit_desc *acpi_desc) +{ + lockdep_assert_held(&acpi_desc->init_mutex); + + acpi_desc->scrub_busy = 0; + acpi_desc->scrub_count++; + if (acpi_desc->scrub_count_state) + sysfs_notify_dirent(acpi_desc->scrub_count_state); +} + static void acpi_nfit_scrub(struct work_struct *work) { struct acpi_nfit_desc *acpi_desc; @@ -2951,14 +2977,10 @@ static void acpi_nfit_scrub(struct work_struct *work) mutex_lock(&acpi_desc->init_mutex); query_rc = acpi_nfit_query_poison(acpi_desc); tmo = __acpi_nfit_scrub(acpi_desc, query_rc); - if (tmo) { - queue_delayed_work(nfit_wq, &acpi_desc->dwork, tmo * HZ); - acpi_desc->scrub_tmo = tmo; - } else { - acpi_desc->scrub_count++; - if (acpi_desc->scrub_count_state) - sysfs_notify_dirent(acpi_desc->scrub_count_state); - } + if (tmo) + __sched_ars(acpi_desc, tmo); + else + notify_ars_done(acpi_desc); memset(acpi_desc->ars_status, 0, acpi_desc->max_ars); mutex_unlock(&acpi_desc->init_mutex); } @@ -3039,7 +3061,7 @@ static int acpi_nfit_register_regions(struct acpi_nfit_desc *acpi_desc) break; } - queue_delayed_work(nfit_wq, &acpi_desc->dwork, 0); + sched_ars(acpi_desc); return 0; } @@ -3241,7 +3263,7 @@ int acpi_nfit_ars_rescan(struct acpi_nfit_desc *acpi_desc, unsigned long flags) } } if (scheduled) { - queue_delayed_work(nfit_wq, &acpi_desc->dwork, 0); + sched_ars(acpi_desc); dev_dbg(dev, "ars_scan triggered\n"); } mutex_unlock(&acpi_desc->init_mutex); diff --git a/drivers/acpi/nfit/nfit.h b/drivers/acpi/nfit/nfit.h index 7d15856a739f..a97ff42fe311 100644 --- a/drivers/acpi/nfit/nfit.h +++ b/drivers/acpi/nfit/nfit.h @@ -203,6 +203,7 @@ struct acpi_nfit_desc { unsigned int max_ars; unsigned int scrub_count; unsigned int scrub_mode; + unsigned int scrub_busy:1; unsigned int cancel:1; unsigned long dimm_cmd_force_en; unsigned long bus_cmd_force_en; -- cgit v1.2.3 From 70ba5b6db96ff7324b8cfc87e0d0383cf59c9677 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Thu, 5 Jul 2018 18:49:23 +0000 Subject: ipv4: Return EINVAL when ping_group_range sysctl doesn't map to user ns The low and high values of the net.ipv4.ping_group_range sysctl were being silently forced to the default disabled state when a write to the sysctl contained GIDs that didn't map to the associated user namespace. Confusingly, the sysctl's write operation would return success and then a subsequent read of the sysctl would indicate that the low and high values are the overflowgid. This patch changes the behavior by clearly returning an error when the sysctl write operation receives a GID range that doesn't map to the associated user namespace. In such a situation, the previous value of the sysctl is preserved and that range will be returned in a subsequent read of the sysctl. Signed-off-by: Tyler Hicks Signed-off-by: David S. Miller --- net/ipv4/sysctl_net_ipv4.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index af0a857d8352..5fa335fd3852 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -189,8 +189,9 @@ static int ipv4_ping_group_range(struct ctl_table *table, int write, if (write && ret == 0) { low = make_kgid(user_ns, urange[0]); high = make_kgid(user_ns, urange[1]); - if (!gid_valid(low) || !gid_valid(high) || - (urange[1] < urange[0]) || gid_lt(high, low)) { + if (!gid_valid(low) || !gid_valid(high)) + return -EINVAL; + if (urange[1] < urange[0] || gid_lt(high, low)) { low = make_kgid(&init_user_ns, 1); high = make_kgid(&init_user_ns, 0); } -- cgit v1.2.3 From 01b3cdfca263a17554f7b249d20a247b2a751521 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 4 Jul 2018 17:02:16 +0200 Subject: USB: serial: keyspan_pda: fix modem-status error handling Fix broken modem-status error handling which could lead to bits of slab data leaking to user space. Fixes: 3b36a8fd6777 ("usb: fix uninitialized variable warning in keyspan_pda") Cc: stable # 2.6.27 Signed-off-by: Johan Hovold --- drivers/usb/serial/keyspan_pda.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 5169624d8b11..38d43c4b7ce5 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -369,8 +369,10 @@ static int keyspan_pda_get_modem_info(struct usb_serial *serial, 3, /* get pins */ USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_IN, 0, 0, data, 1, 2000); - if (rc >= 0) + if (rc == 1) *value = *data; + else if (rc >= 0) + rc = -EIO; kfree(data); return rc; -- cgit v1.2.3 From 794744abfffef8b1f3c0c8a4896177d6d13d653d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 4 Jul 2018 17:02:17 +0200 Subject: USB: serial: mos7840: fix status-register error handling Add missing transfer-length sanity check to the status-register completion handler to avoid leaking bits of uninitialised slab data to user space. Fixes: 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver") Cc: stable # 2.6.19 Signed-off-by: Johan Hovold --- drivers/usb/serial/mos7840.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index fdceb46d9fc6..b580b4c7fa48 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -468,6 +468,9 @@ static void mos7840_control_callback(struct urb *urb) } dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length); + if (urb->actual_length < 1) + goto out; + dev_dbg(dev, "%s mos7840_port->MsrLsr is %d port %d\n", __func__, mos7840_port->MsrLsr, mos7840_port->port_num); data = urb->transfer_buffer; -- cgit v1.2.3 From 1268ed0c474a5c8f165ef386f3310521b5e00e27 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Tue, 3 Jul 2018 16:01:55 -0700 Subject: x86/hyper-v: Fix the circular dependency in IPI enlightenment The IPI hypercalls depend on being able to map the Linux notion of CPU ID to the hypervisor's notion of the CPU ID. The array hv_vp_index[] provides this mapping. Code for populating this array depends on the IPI functionality. Break this circular dependency. [ tglx: Use a proper define instead of '-1' with a u32 variable as pointed out by Vitaly ] Fixes: 68bb7bfb7985 ("X86/Hyper-V: Enable IPI enlightenments") Signed-off-by: K. Y. Srinivasan Signed-off-by: Thomas Gleixner Tested-by: Michael Kelley Cc: gregkh@linuxfoundation.org Cc: devel@linuxdriverproject.org Cc: olaf@aepfle.de Cc: apw@canonical.com Cc: jasowang@redhat.com Cc: hpa@zytor.com Cc: sthemmin@microsoft.com Cc: Michael.H.Kelley@microsoft.com Cc: vkuznets@redhat.com Link: https://lkml.kernel.org/r/20180703230155.15160-1-kys@linuxonhyperv.com --- arch/x86/hyperv/hv_apic.c | 5 +++++ arch/x86/hyperv/hv_init.c | 5 ++++- arch/x86/include/asm/mshyperv.h | 5 ++++- 3 files changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/x86/hyperv/hv_apic.c b/arch/x86/hyperv/hv_apic.c index f68855499391..402338365651 100644 --- a/arch/x86/hyperv/hv_apic.c +++ b/arch/x86/hyperv/hv_apic.c @@ -114,6 +114,8 @@ static bool __send_ipi_mask_ex(const struct cpumask *mask, int vector) ipi_arg->vp_set.format = HV_GENERIC_SET_SPARSE_4K; nr_bank = cpumask_to_vpset(&(ipi_arg->vp_set), mask); } + if (nr_bank < 0) + goto ipi_mask_ex_done; if (!nr_bank) ipi_arg->vp_set.format = HV_GENERIC_SET_ALL; @@ -158,6 +160,9 @@ static bool __send_ipi_mask(const struct cpumask *mask, int vector) for_each_cpu(cur_cpu, mask) { vcpu = hv_cpu_number_to_vp_number(cur_cpu); + if (vcpu == VP_INVAL) + goto ipi_mask_done; + /* * This particular version of the IPI hypercall can * only target upto 64 CPUs. diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c index 4c431e1c1eff..1ff420217298 100644 --- a/arch/x86/hyperv/hv_init.c +++ b/arch/x86/hyperv/hv_init.c @@ -265,7 +265,7 @@ void __init hyperv_init(void) { u64 guest_id, required_msrs; union hv_x64_msr_hypercall_contents hypercall_msr; - int cpuhp; + int cpuhp, i; if (x86_hyper_type != X86_HYPER_MS_HYPERV) return; @@ -293,6 +293,9 @@ void __init hyperv_init(void) if (!hv_vp_index) return; + for (i = 0; i < num_possible_cpus(); i++) + hv_vp_index[i] = VP_INVAL; + hv_vp_assist_page = kcalloc(num_possible_cpus(), sizeof(*hv_vp_assist_page), GFP_KERNEL); if (!hv_vp_assist_page) { diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h index 3cd14311edfa..5a7375ed5f7c 100644 --- a/arch/x86/include/asm/mshyperv.h +++ b/arch/x86/include/asm/mshyperv.h @@ -9,6 +9,8 @@ #include #include +#define VP_INVAL U32_MAX + struct ms_hyperv_info { u32 features; u32 misc_features; @@ -20,7 +22,6 @@ struct ms_hyperv_info { extern struct ms_hyperv_info ms_hyperv; - /* * Generate the guest ID. */ @@ -281,6 +282,8 @@ static inline int cpumask_to_vpset(struct hv_vpset *vpset, */ for_each_cpu(cpu, cpus) { vcpu = hv_cpu_number_to_vp_number(cpu); + if (vcpu == VP_INVAL) + return -1; vcpu_bank = vcpu / 64; vcpu_offset = vcpu % 64; __set_bit(vcpu_offset, (unsigned long *) -- cgit v1.2.3 From c6b17f1020d956f4113d478cae6171b9093817ba Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Fri, 6 Jul 2018 15:14:11 +0800 Subject: ALSA: hda/realtek - two more lenovo models need fixup of MIC_LOCATION We have two new lenovo desktop models which need to apply the fixup of ALC294_FIXUP_LENOVO_MIC_LOCATION, and they have the same pin cfg as the machine with subsystem id:0x17aa3136, now use the pincfg table to apply the fixup for them. Cc: Signed-off-by: Hui Wang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5ad6c7e5f92e..7496be4491b1 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6612,7 +6612,6 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x310c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), SND_PCI_QUIRK(0x17aa, 0x312a, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), SND_PCI_QUIRK(0x17aa, 0x312f, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), - SND_PCI_QUIRK(0x17aa, 0x3136, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), SND_PCI_QUIRK(0x17aa, 0x313c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI), SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC), @@ -6796,6 +6795,11 @@ static const struct snd_hda_pin_quirk alc269_pin_fixup_tbl[] = { {0x1a, 0x02a11040}, {0x1b, 0x01014020}, {0x21, 0x0221101f}), + SND_HDA_PIN_QUIRK(0x10ec0235, 0x17aa, "Lenovo", ALC294_FIXUP_LENOVO_MIC_LOCATION, + {0x14, 0x90170110}, + {0x19, 0x02a11020}, + {0x1a, 0x02a11030}, + {0x21, 0x0221101f}), SND_HDA_PIN_QUIRK(0x10ec0236, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, {0x12, 0x90a60140}, {0x14, 0x90170110}, -- cgit v1.2.3 From 5711b4e89319c2912f20b2a4f371c1525fc9551d Mon Sep 17 00:00:00 2001 From: Máté Eckl Date: Thu, 5 Jul 2018 12:01:53 +0200 Subject: netfilter: nf_tproxy: fix possible non-linear access to transport header MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes a silent out-of-bound read possibility that was present because of the misuse of this function. Mostly it was called with a struct udphdr *hp which had only the udphdr part linearized by the skb_header_pointer, however nf_tproxy_get_sock_v{4,6} uses it as a tcphdr pointer, so some reads for tcp specific attributes may be invalid. Fixes: a583636a83ea ("inet: refactor inet[6]_lookup functions to take skb") Signed-off-by: Máté Eckl Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_tproxy.h | 4 ++-- net/ipv4/netfilter/nf_tproxy_ipv4.c | 18 ++++++++++++------ net/ipv6/netfilter/nf_tproxy_ipv6.c | 18 ++++++++++++------ net/netfilter/xt_TPROXY.c | 8 ++++---- 4 files changed, 30 insertions(+), 18 deletions(-) diff --git a/include/net/netfilter/nf_tproxy.h b/include/net/netfilter/nf_tproxy.h index 9754a50ecde9..4cc64c8446eb 100644 --- a/include/net/netfilter/nf_tproxy.h +++ b/include/net/netfilter/nf_tproxy.h @@ -64,7 +64,7 @@ nf_tproxy_handle_time_wait4(struct net *net, struct sk_buff *skb, * belonging to established connections going through that one. */ struct sock * -nf_tproxy_get_sock_v4(struct net *net, struct sk_buff *skb, void *hp, +nf_tproxy_get_sock_v4(struct net *net, struct sk_buff *skb, const u8 protocol, const __be32 saddr, const __be32 daddr, const __be16 sport, const __be16 dport, @@ -103,7 +103,7 @@ nf_tproxy_handle_time_wait6(struct sk_buff *skb, int tproto, int thoff, struct sock *sk); struct sock * -nf_tproxy_get_sock_v6(struct net *net, struct sk_buff *skb, int thoff, void *hp, +nf_tproxy_get_sock_v6(struct net *net, struct sk_buff *skb, int thoff, const u8 protocol, const struct in6_addr *saddr, const struct in6_addr *daddr, const __be16 sport, const __be16 dport, diff --git a/net/ipv4/netfilter/nf_tproxy_ipv4.c b/net/ipv4/netfilter/nf_tproxy_ipv4.c index 805e83ec3ad9..164714104965 100644 --- a/net/ipv4/netfilter/nf_tproxy_ipv4.c +++ b/net/ipv4/netfilter/nf_tproxy_ipv4.c @@ -37,7 +37,7 @@ nf_tproxy_handle_time_wait4(struct net *net, struct sk_buff *skb, * to a listener socket if there's one */ struct sock *sk2; - sk2 = nf_tproxy_get_sock_v4(net, skb, hp, iph->protocol, + sk2 = nf_tproxy_get_sock_v4(net, skb, iph->protocol, iph->saddr, laddr ? laddr : iph->daddr, hp->source, lport ? lport : hp->dest, skb->dev, NF_TPROXY_LOOKUP_LISTENER); @@ -71,7 +71,7 @@ __be32 nf_tproxy_laddr4(struct sk_buff *skb, __be32 user_laddr, __be32 daddr) EXPORT_SYMBOL_GPL(nf_tproxy_laddr4); struct sock * -nf_tproxy_get_sock_v4(struct net *net, struct sk_buff *skb, void *hp, +nf_tproxy_get_sock_v4(struct net *net, struct sk_buff *skb, const u8 protocol, const __be32 saddr, const __be32 daddr, const __be16 sport, const __be16 dport, @@ -79,16 +79,21 @@ nf_tproxy_get_sock_v4(struct net *net, struct sk_buff *skb, void *hp, const enum nf_tproxy_lookup_t lookup_type) { struct sock *sk; - struct tcphdr *tcph; switch (protocol) { - case IPPROTO_TCP: + case IPPROTO_TCP: { + struct tcphdr _hdr, *hp; + + hp = skb_header_pointer(skb, ip_hdrlen(skb), + sizeof(struct tcphdr), &_hdr); + if (hp == NULL) + return NULL; + switch (lookup_type) { case NF_TPROXY_LOOKUP_LISTENER: - tcph = hp; sk = inet_lookup_listener(net, &tcp_hashinfo, skb, ip_hdrlen(skb) + - __tcp_hdrlen(tcph), + __tcp_hdrlen(hp), saddr, sport, daddr, dport, in->ifindex, 0); @@ -110,6 +115,7 @@ nf_tproxy_get_sock_v4(struct net *net, struct sk_buff *skb, void *hp, BUG(); } break; + } case IPPROTO_UDP: sk = udp4_lib_lookup(net, saddr, sport, daddr, dport, in->ifindex); diff --git a/net/ipv6/netfilter/nf_tproxy_ipv6.c b/net/ipv6/netfilter/nf_tproxy_ipv6.c index bf1d6c421e3b..5dfd33af6451 100644 --- a/net/ipv6/netfilter/nf_tproxy_ipv6.c +++ b/net/ipv6/netfilter/nf_tproxy_ipv6.c @@ -55,7 +55,7 @@ nf_tproxy_handle_time_wait6(struct sk_buff *skb, int tproto, int thoff, * to a listener socket if there's one */ struct sock *sk2; - sk2 = nf_tproxy_get_sock_v6(net, skb, thoff, hp, tproto, + sk2 = nf_tproxy_get_sock_v6(net, skb, thoff, tproto, &iph->saddr, nf_tproxy_laddr6(skb, laddr, &iph->daddr), hp->source, @@ -72,7 +72,7 @@ nf_tproxy_handle_time_wait6(struct sk_buff *skb, int tproto, int thoff, EXPORT_SYMBOL_GPL(nf_tproxy_handle_time_wait6); struct sock * -nf_tproxy_get_sock_v6(struct net *net, struct sk_buff *skb, int thoff, void *hp, +nf_tproxy_get_sock_v6(struct net *net, struct sk_buff *skb, int thoff, const u8 protocol, const struct in6_addr *saddr, const struct in6_addr *daddr, const __be16 sport, const __be16 dport, @@ -80,15 +80,20 @@ nf_tproxy_get_sock_v6(struct net *net, struct sk_buff *skb, int thoff, void *hp, const enum nf_tproxy_lookup_t lookup_type) { struct sock *sk; - struct tcphdr *tcph; switch (protocol) { - case IPPROTO_TCP: + case IPPROTO_TCP: { + struct tcphdr _hdr, *hp; + + hp = skb_header_pointer(skb, thoff, + sizeof(struct tcphdr), &_hdr); + if (hp == NULL) + return NULL; + switch (lookup_type) { case NF_TPROXY_LOOKUP_LISTENER: - tcph = hp; sk = inet6_lookup_listener(net, &tcp_hashinfo, skb, - thoff + __tcp_hdrlen(tcph), + thoff + __tcp_hdrlen(hp), saddr, sport, daddr, ntohs(dport), in->ifindex, 0); @@ -110,6 +115,7 @@ nf_tproxy_get_sock_v6(struct net *net, struct sk_buff *skb, int thoff, void *hp, BUG(); } break; + } case IPPROTO_UDP: sk = udp6_lib_lookup(net, saddr, sport, daddr, dport, in->ifindex); diff --git a/net/netfilter/xt_TPROXY.c b/net/netfilter/xt_TPROXY.c index 58fce4e749a9..d76550a8b642 100644 --- a/net/netfilter/xt_TPROXY.c +++ b/net/netfilter/xt_TPROXY.c @@ -61,7 +61,7 @@ tproxy_tg4(struct net *net, struct sk_buff *skb, __be32 laddr, __be16 lport, * addresses, this happens if the redirect already happened * and the current packet belongs to an already established * connection */ - sk = nf_tproxy_get_sock_v4(net, skb, hp, iph->protocol, + sk = nf_tproxy_get_sock_v4(net, skb, iph->protocol, iph->saddr, iph->daddr, hp->source, hp->dest, skb->dev, NF_TPROXY_LOOKUP_ESTABLISHED); @@ -77,7 +77,7 @@ tproxy_tg4(struct net *net, struct sk_buff *skb, __be32 laddr, __be16 lport, else if (!sk) /* no, there's no established connection, check if * there's a listener on the redirected addr/port */ - sk = nf_tproxy_get_sock_v4(net, skb, hp, iph->protocol, + sk = nf_tproxy_get_sock_v4(net, skb, iph->protocol, iph->saddr, laddr, hp->source, lport, skb->dev, NF_TPROXY_LOOKUP_LISTENER); @@ -150,7 +150,7 @@ tproxy_tg6_v1(struct sk_buff *skb, const struct xt_action_param *par) * addresses, this happens if the redirect already happened * and the current packet belongs to an already established * connection */ - sk = nf_tproxy_get_sock_v6(xt_net(par), skb, thoff, hp, tproto, + sk = nf_tproxy_get_sock_v6(xt_net(par), skb, thoff, tproto, &iph->saddr, &iph->daddr, hp->source, hp->dest, xt_in(par), NF_TPROXY_LOOKUP_ESTABLISHED); @@ -171,7 +171,7 @@ tproxy_tg6_v1(struct sk_buff *skb, const struct xt_action_param *par) else if (!sk) /* no there's no established connection, check if * there's a listener on the redirected addr/port */ - sk = nf_tproxy_get_sock_v6(xt_net(par), skb, thoff, hp, + sk = nf_tproxy_get_sock_v6(xt_net(par), skb, thoff, tproto, &iph->saddr, laddr, hp->source, lport, xt_in(par), NF_TPROXY_LOOKUP_LISTENER); -- cgit v1.2.3 From 09b1565324cba029dd0079b179e329813a1520c6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 4 Jul 2018 12:57:54 -0700 Subject: kbuild: update ARCH alias info for sh In Kbuild documentation, add alias for 64-bit sh ARCH ("sh64") to the list of ARCH aliases. Signed-off-by: Randy Dunlap Signed-off-by: Masahiro Yamada --- Documentation/kbuild/kbuild.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index 6c9c69ec3986..ec5890b51bd6 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -88,6 +88,7 @@ In most cases the name of the architecture is the same as the directory name found in the arch/ directory. But some architectures such as x86 and sparc have aliases. x86: i386 for 32 bit, x86_64 for 64 bit +sh: sh for 32 bit, sh64 for 64 bit sparc: sparc for 32 bit, sparc64 for 64 bit CROSS_COMPILE -- cgit v1.2.3 From 5ba800962a80d4158b73fb91a7779df7b770c750 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 5 Jul 2018 12:12:03 -0700 Subject: kbuild: update ARCH alias info for sparc The supported alias for building sparc 32-bit is "sparc32", not "sparc", so update the alias documentation for that. Just using "sparc" produces a 64-bit config file. Signed-off-by: Randy Dunlap Acked-by: David S. Miller Signed-off-by: Masahiro Yamada --- Documentation/kbuild/kbuild.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index ec5890b51bd6..d605d506b334 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -89,7 +89,7 @@ directory name found in the arch/ directory. But some architectures such as x86 and sparc have aliases. x86: i386 for 32 bit, x86_64 for 64 bit sh: sh for 32 bit, sh64 for 64 bit -sparc: sparc for 32 bit, sparc64 for 64 bit +sparc: sparc32 for 32 bit, sparc64 for 64 bit CROSS_COMPILE -------------------------------------------------- -- cgit v1.2.3 From 3f9cdee5929b7d035e86302dcf08fbf3e80b0739 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 4 Jul 2018 12:59:16 -0700 Subject: kbuild: delete INSTALL_FW_PATH from kbuild documentation Removed Kbuild documentation for INSTALL_FW_PATH. The kbuild symbol INSTALL_FW_PATH was removed from Kbuild tools in September 2017 (for 4.14) but the symbol was not deleted from the kbuild documentation, so do that now. Fixes: 5620a0d1aacd ("firmware: delete in-kernel firmware") Signed-off-by: Randy Dunlap Cc: stable@vger.kernel.org # 4.14+ Cc: Greg Kroah-Hartman Signed-off-by: Masahiro Yamada --- Documentation/kbuild/kbuild.txt | 9 --------- 1 file changed, 9 deletions(-) diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index d605d506b334..1eb59cba242c 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -149,15 +149,6 @@ stripped after they are installed. If INSTALL_MOD_STRIP is '1', then the default option --strip-debug will be used. Otherwise, INSTALL_MOD_STRIP value will be used as the options to the strip command. -INSTALL_FW_PATH --------------------------------------------------- -INSTALL_FW_PATH specifies where to install the firmware blobs. -The default value is: - - $(INSTALL_MOD_PATH)/lib/firmware - -The value can be overridden in which case the default value is ignored. - INSTALL_HDR_PATH -------------------------------------------------- INSTALL_HDR_PATH specifies where to install user space headers when -- cgit v1.2.3 From 452d4c8673112ee72de6042d5d95c761acc2d35a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 4 Jul 2018 15:49:56 -0700 Subject: kconfig: update user kconfig tools doc. Update Documentation/kbuild/kconfig.txt, which mostly contains user help for using the kernel config tools. - Add mention of 'nconfig' embedded help text. - Make the section on new config symbols readable. - Correct how to find menuconfig search help. - Add section on 'nconfig' usage. - Mention that gconfig has multiple viewing modes/options. Signed-off-by: Randy Dunlap Signed-off-by: Masahiro Yamada --- Documentation/kbuild/kconfig.txt | 51 +++++++++++++++++++++++++++++++++------- 1 file changed, 43 insertions(+), 8 deletions(-) diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt index 7233118f3a05..68c82914c0f3 100644 --- a/Documentation/kbuild/kconfig.txt +++ b/Documentation/kbuild/kconfig.txt @@ -2,9 +2,9 @@ This file contains some assistance for using "make *config". Use "make help" to list all of the possible configuration targets. -The xconfig ('qconf') and menuconfig ('mconf') programs also -have embedded help text. Be sure to check it for navigation, -search, and other general help text. +The xconfig ('qconf'), menuconfig ('mconf'), and nconfig ('nconf') +programs also have embedded help text. Be sure to check that for +navigation, search, and other general help text. ====================================================================== General @@ -17,13 +17,16 @@ this happens, using a previously working .config file and running for you, so you may find that you need to see what NEW kernel symbols have been introduced. -To see a list of new config symbols when using "make oldconfig", use +To see a list of new config symbols, use cp user/some/old.config .config make listnewconfig and the config program will list any new symbols, one per line. +Alternatively, you can use the brute force method: + + make oldconfig scripts/diffconfig .config.old .config | less ______________________________________________________________________ @@ -160,7 +163,7 @@ Searching in menuconfig: This lists all config symbols that contain "hotplug", e.g., HOTPLUG_CPU, MEMORY_HOTPLUG. - For search help, enter / followed TAB-TAB-TAB (to highlight + For search help, enter / followed by TAB-TAB (to highlight ) and Enter. This will tell you that you can also use regular expressions (regexes) in the search string, so if you are not interested in MEMORY_HOTPLUG, you could try @@ -202,6 +205,39 @@ Example: make MENUCONFIG_MODE=single_menu menuconfig +====================================================================== +nconfig +-------------------------------------------------- + +nconfig is an alternate text-based configurator. It lists function +keys across the bottom of the terminal (window) that execute commands. +You can also just use the corresponding numeric key to execute the +commands unless you are in a data entry window. E.g., instead of F6 +for Save, you can just press 6. + +Use F1 for Global help or F3 for the Short help menu. + +Searching in nconfig: + + You can search either in the menu entry "prompt" strings + or in the configuration symbols. + + Use / to begin a search through the menu entries. This does + not support regular expressions. Use or for + Next hit and Previous hit, respectively. Use to + terminate the search mode. + + F8 (SymSearch) searches the configuration symbols for the + given string or regular expression (regex). + +NCONFIG_MODE +-------------------------------------------------- +This mode shows all sub-menus in one large tree. + +Example: + make NCONFIG_MODE=single_menu nconfig + + ====================================================================== xconfig -------------------------------------------------- @@ -230,8 +266,7 @@ gconfig Searching in gconfig: - None (gconfig isn't maintained as well as xconfig or menuconfig); - however, gconfig does have a few more viewing choices than - xconfig does. + There is no search command in gconfig. However, gconfig does + have several different viewing choices, modes, and options. ### -- cgit v1.2.3 From 00e0793f834cd233240b19532581e3205caaccd9 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 4 Jul 2018 19:47:39 -0700 Subject: kbuild: document the KBUILD_KCONFIG env. variable Add usage info for the Kbuild environment variable KBUILD_KCONFIG. Signed-off-by: Randy Dunlap Reviewed-by: Cao jin Signed-off-by: Masahiro Yamada --- Documentation/kbuild/kbuild.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index 1eb59cba242c..114c7ce7b58d 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -50,6 +50,11 @@ LDFLAGS_MODULE -------------------------------------------------- Additional options used for $(LD) when linking modules. +KBUILD_KCONFIG +-------------------------------------------------- +Set the top-level Kconfig file to the value of this environment +variable. The default name is "Kconfig". + KBUILD_VERBOSE -------------------------------------------------- Set the kbuild verbosity. Can be assigned same values as "V=...". -- cgit v1.2.3 From 48f6e3cf5bc6dd0ee00405342ff310c3b1fedb35 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 5 Jul 2018 11:48:21 +0900 Subject: kbuild: do not drop -I without parameter The comment line for addtree says "skip if -I has no parameter". What it actually does is "drop if -I has no parameter". For example, if you have the compiler flag '-I foo' (a space between), it will be converted to 'foo'. This completely changes the meaning. What we want is, "do nothing" for -I without parameter so that '-I foo' is kept as-is. Signed-off-by: Masahiro Yamada --- scripts/Kbuild.include | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index c8156d61678c..86321f06461e 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -214,7 +214,7 @@ hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj # Prefix -I with $(srctree) if it is not an absolute path. # skip if -I has no parameter addtree = $(if $(patsubst -I%,%,$(1)), \ -$(if $(filter-out -I/% -I./% -I../%,$(1)),$(patsubst -I%,-I$(srctree)/%,$(1)),$(1))) +$(if $(filter-out -I/% -I./% -I../%,$(1)),$(patsubst -I%,-I$(srctree)/%,$(1)),$(1)),$(1)) # Find all -I options and call addtree flags = $(foreach o,$($(1)),$(if $(filter -I%,$(o)),$(call addtree,$(o)),$(o))) -- cgit v1.2.3 From bd412d81b7ea4cfa265e3d2309a166181ec7bdab Mon Sep 17 00:00:00 2001 From: Ulf Magnusson Date: Thu, 5 Jul 2018 12:33:07 +0900 Subject: kbuild: .PHONY is not a variable, but PHONY is .PHONY is a target, not a variable. Signed-off-by: Ulf Magnusson Signed-off-by: Masahiro Yamada --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index c5ce55cbc543..5b26847909ec 100644 --- a/Makefile +++ b/Makefile @@ -1717,6 +1717,6 @@ endif # skip-makefile PHONY += FORCE FORCE: -# Declare the contents of the .PHONY variable as phony. We keep that +# Declare the contents of the PHONY variable as phony. We keep that # information in a variable so we can use it in if_changed and friends. .PHONY: $(PHONY) -- cgit v1.2.3 From 6916162c7308332d5a029521821f925466de311d Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 5 Jul 2018 12:33:08 +0900 Subject: kbuild: remove duplicated comments about PHONY The comment is the same as in the top-level Makefile. Also, the comments contain typos: - the .PHONY variable -> the PHONY variable - se we can ... -> so we can ... Instead of fixing the typos, just remove the duplicated comments. Signed-off-by: Masahiro Yamada --- scripts/Makefile.build | 3 --- scripts/Makefile.clean | 3 --- scripts/Makefile.modbuiltin | 4 ---- scripts/Makefile.modinst | 4 ---- scripts/Makefile.modpost | 4 ---- scripts/Makefile.modsign | 3 --- 6 files changed, 21 deletions(-) diff --git a/scripts/Makefile.build b/scripts/Makefile.build index e7889f486ca1..514ed63ff571 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -590,7 +590,4 @@ endif # We never want them to be removed automatically. .SECONDARY: $(targets) -# Declare the contents of the .PHONY variable as phony. We keep that -# information in a variable se we can use it in if_changed and friends. - .PHONY: $(PHONY) diff --git a/scripts/Makefile.clean b/scripts/Makefile.clean index 808d09f27ad4..17ef94c635cd 100644 --- a/scripts/Makefile.clean +++ b/scripts/Makefile.clean @@ -88,7 +88,4 @@ PHONY += $(subdir-ymn) $(subdir-ymn): $(Q)$(MAKE) $(clean)=$@ -# Declare the contents of the .PHONY variable as phony. We keep that -# information in a variable se we can use it in if_changed and friends. - .PHONY: $(PHONY) diff --git a/scripts/Makefile.modbuiltin b/scripts/Makefile.modbuiltin index a763b4775d06..40867a41615b 100644 --- a/scripts/Makefile.modbuiltin +++ b/scripts/Makefile.modbuiltin @@ -54,8 +54,4 @@ PHONY += $(subdir-ym) $(subdir-ym): $(Q)$(MAKE) $(modbuiltin)=$@ - -# Declare the contents of the .PHONY variable as phony. We keep that -# information in a variable se we can use it in if_changed and friends. - .PHONY: $(PHONY) diff --git a/scripts/Makefile.modinst b/scripts/Makefile.modinst index 51ca0244fc8a..ff5ca9817a85 100644 --- a/scripts/Makefile.modinst +++ b/scripts/Makefile.modinst @@ -35,8 +35,4 @@ modinst_dir = $(if $(KBUILD_EXTMOD),$(ext-mod-dir),kernel/$(@D)) $(modules): $(call cmd,modules_install,$(MODLIB)/$(modinst_dir)) - -# Declare the contents of the .PHONY variable as phony. We keep that -# information in a variable so we can use it in if_changed and friends. - .PHONY: $(PHONY) diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost index df4174405feb..dd92dbbbaa68 100644 --- a/scripts/Makefile.modpost +++ b/scripts/Makefile.modpost @@ -149,8 +149,4 @@ ifneq ($(cmd_files),) include $(cmd_files) endif - -# Declare the contents of the .PHONY variable as phony. We keep that -# information in a variable se we can use it in if_changed and friends. - .PHONY: $(PHONY) diff --git a/scripts/Makefile.modsign b/scripts/Makefile.modsign index 171483bc0538..da56aa78d245 100644 --- a/scripts/Makefile.modsign +++ b/scripts/Makefile.modsign @@ -27,7 +27,4 @@ modinst_dir = $(if $(KBUILD_EXTMOD),$(ext-mod-dir),kernel/$(@D)) $(modules): $(call cmd,sign_ko,$(MODLIB)/$(modinst_dir)) -# Declare the contents of the .PHONY variable as phony. We keep that -# information in a variable se we can use it in if_changed and friends. - .PHONY: $(PHONY) -- cgit v1.2.3 From c0addc9a5ba88350a3d9365a73290e34dc238b70 Mon Sep 17 00:00:00 2001 From: Laurentiu Tudor Date: Thu, 5 Jul 2018 16:31:42 +0300 Subject: docs: kernel-parameters.txt: document xhci-hcd.quirks parameter This parameter introduced several years ago in the XHCI host controller driver was somehow left undocumented. Add a few lines in the kernel parameters text. Signed-off-by: Laurentiu Tudor Signed-off-by: Greg Kroah-Hartman --- Documentation/admin-guide/kernel-parameters.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index efc7aa7a0670..533ff5c68970 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -4846,3 +4846,8 @@ xirc2ps_cs= [NET,PCMCIA] Format: ,,,,,[,[,[,]]] + + xhci-hcd.quirks [USB,KNL] + A hex value specifying bitmask with supplemental xhci + host controller quirks. Meaning of each bit can be + consulted in header drivers/usb/host/xhci.h. -- cgit v1.2.3 From aaa8fee7dfc974d7f057bc9f1d8e305a114469ad Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 6 Jul 2018 15:58:10 +0200 Subject: usb/gadget: aspeed-vhub: add USB_LIBCOMPOSITE dependency Without that option, we run into a link failure: drivers/usb/gadget/udc/aspeed-vhub/hub.o: In function `ast_vhub_std_hub_request': hub.c:(.text+0x5b0): undefined reference to `usb_gadget_get_string' Fixes: 7ecca2a4080c ("usb/gadget: Add driver for Aspeed SoC virtual hub") Acked-by: Felipe Balbi Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/aspeed-vhub/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/udc/aspeed-vhub/Kconfig b/drivers/usb/gadget/udc/aspeed-vhub/Kconfig index f0cdf89b8503..83ba8a2eb6af 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/Kconfig +++ b/drivers/usb/gadget/udc/aspeed-vhub/Kconfig @@ -2,6 +2,7 @@ config USB_ASPEED_VHUB tristate "Aspeed vHub UDC driver" depends on ARCH_ASPEED || COMPILE_TEST + depends on USB_LIBCOMPOSITE help USB peripheral controller for the Aspeed AST2500 family SoCs supporting the "vHub" functionality and USB2.0 -- cgit v1.2.3 From 313db3d6488bb03b61b99de9dbca061f1fd838e1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 4 Jul 2018 12:48:53 +0300 Subject: xhci: xhci-mem: off by one in xhci_stream_id_to_ring() The > should be >= here so that we don't read one element beyond the end of the ep->stream_info->stream_rings[] array. Fixes: e9df17eb1408 ("USB: xhci: Correct assumptions about number of rings per endpoint.") Signed-off-by: Dan Carpenter Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 8a62eee9eee1..ef350c33dc4a 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -595,7 +595,7 @@ struct xhci_ring *xhci_stream_id_to_ring( if (!ep->stream_info) return NULL; - if (stream_id > ep->stream_info->num_streams) + if (stream_id >= ep->stream_info->num_streams) return NULL; return ep->stream_info->stream_rings[stream_id]; } -- cgit v1.2.3 From bba57eddadda936c94b5dccf73787cb9e159d0a5 Mon Sep 17 00:00:00 2001 From: Nico Sneck Date: Mon, 2 Jul 2018 19:26:07 +0300 Subject: usb: quirks: add delay quirks for Corsair Strafe Corsair Strafe appears to suffer from the same issues as the Corsair Strafe RGB. Apply the same quirks (control message delay and init delay) that the RGB version has to 1b1c:1b15. With these quirks in place the keyboard works correctly upon booting the system, and no longer requires reattaching the device. Signed-off-by: Nico Sneck Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index c55def2f1320..097057d2eacf 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -378,6 +378,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* Corsair K70 RGB */ { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Corsair Strafe */ + { USB_DEVICE(0x1b1c, 0x1b15), .driver_info = USB_QUIRK_DELAY_INIT | + USB_QUIRK_DELAY_CTRL_MSG }, + /* Corsair Strafe RGB */ { USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT | USB_QUIRK_DELAY_CTRL_MSG }, -- cgit v1.2.3 From 568cc2f07c8ea5f71a0486464bd9703e4671045f Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Tue, 3 Jul 2018 06:24:20 +0300 Subject: ARM: dts: armada-38x: use the new thermal binding Commit 2f28e4c24b10e (thermal: armada: Clarify control registers accesses) introduced the new thermal binding. The new binding extends the second registers field size to 8. Switch to the new binding to fix thermal reading values. Without this change the fix for errata #132698 introduced in commit 8c0b888f661 (thermal: armada: Change sensors trim default value) has no effect. Cc: stable@vger.kernel.org # v4.16+ Reviewed-by: Miquel Raynal Signed-off-by: Baruch Siach Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-38x.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 18edc9bc7927..929459c42760 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -547,7 +547,7 @@ thermal: thermal@e8078 { compatible = "marvell,armada380-thermal"; - reg = <0xe4078 0x4>, <0xe4074 0x4>; + reg = <0xe4078 0x4>, <0xe4070 0x8>; status = "okay"; }; -- cgit v1.2.3 From f1e255d60ae66a9f672ff9a207ee6cd8e33d2679 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Fri, 6 Jul 2018 17:12:56 +0200 Subject: USB: yurex: fix out-of-bounds uaccess in read handler In general, accessing userspace memory beyond the length of the supplied buffer in VFS read/write handlers can lead to both kernel memory corruption (via kernel_read()/kernel_write(), which can e.g. be triggered via sys_splice()) and privilege escalation inside userspace. Fix it by using simple_read_from_buffer() instead of custom logic. Fixes: 6bc235a2e24a ("USB: add driver for Meywa-Denki & Kayac YUREX") Signed-off-by: Jann Horn Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/yurex.c | 23 ++++++----------------- 1 file changed, 6 insertions(+), 17 deletions(-) diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 8abb6cbbd98a..3be40eaa1ac9 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -396,8 +396,7 @@ static ssize_t yurex_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) { struct usb_yurex *dev; - int retval = 0; - int bytes_read = 0; + int len = 0; char in_buffer[20]; unsigned long flags; @@ -405,26 +404,16 @@ static ssize_t yurex_read(struct file *file, char __user *buffer, size_t count, mutex_lock(&dev->io_mutex); if (!dev->interface) { /* already disconnected */ - retval = -ENODEV; - goto exit; + mutex_unlock(&dev->io_mutex); + return -ENODEV; } spin_lock_irqsave(&dev->lock, flags); - bytes_read = snprintf(in_buffer, 20, "%lld\n", dev->bbu); + len = snprintf(in_buffer, 20, "%lld\n", dev->bbu); spin_unlock_irqrestore(&dev->lock, flags); - - if (*ppos < bytes_read) { - if (copy_to_user(buffer, in_buffer + *ppos, bytes_read - *ppos)) - retval = -EFAULT; - else { - retval = bytes_read - *ppos; - *ppos += bytes_read; - } - } - -exit: mutex_unlock(&dev->io_mutex); - return retval; + + return simple_read_from_buffer(buffer, count, ppos, in_buffer, len); } static ssize_t yurex_write(struct file *file, const char __user *user_buffer, -- cgit v1.2.3 From d59d2f9995d28974877750f429e821324bd603c7 Mon Sep 17 00:00:00 2001 From: Ping-Ke Shih Date: Fri, 6 Jul 2018 13:44:35 +0800 Subject: staging: r8822be: Fix RTL8822be can't find any wireless AP RTL8822be can't bring up properly on ASUS X530UN, and dmesg says: [ 8.591333] r8822be: module is from the staging directory, the quality is unknown, you have been warned. [ 8.593122] r8822be 0000:02:00.0: enabling device (0000 -> 0003) [ 8.669163] r8822be: Using firmware rtlwifi/rtl8822befw.bin [ 9.289939] r8822be: rtlwifi: wireless switch is on [ 10.056426] r8822be 0000:02:00.0 wlp2s0: renamed from wlan0 ... [ 11.952534] r8822be: halmac_init_hal failed [ 11.955933] r8822be: halmac_init_hal failed [ 11.956227] r8822be: halmac_init_hal failed [ 22.007942] r8822be: halmac_init_hal failed Jian-Hong reported it works if turn off ASPM with module parameter aspm=0. In order to fix this problem kindly, this commit don't turn off aspm but enlarge ASPM L1 latency to 7. Reported-by: Jian-Hong Pan Tested-by: Jian-Hong Pan Signed-off-by: Ping-Ke Shih Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtlwifi/rtl8822be/hw.c | 2 +- drivers/staging/rtlwifi/wifi.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/rtlwifi/rtl8822be/hw.c b/drivers/staging/rtlwifi/rtl8822be/hw.c index 7947edb239a1..88ba5b2fea6a 100644 --- a/drivers/staging/rtlwifi/rtl8822be/hw.c +++ b/drivers/staging/rtlwifi/rtl8822be/hw.c @@ -803,7 +803,7 @@ static void _rtl8822be_enable_aspm_back_door(struct ieee80211_hw *hw) return; pci_read_config_byte(rtlpci->pdev, 0x70f, &tmp); - pci_write_config_byte(rtlpci->pdev, 0x70f, tmp | BIT(7)); + pci_write_config_byte(rtlpci->pdev, 0x70f, tmp | ASPM_L1_LATENCY << 3); pci_read_config_byte(rtlpci->pdev, 0x719, &tmp); pci_write_config_byte(rtlpci->pdev, 0x719, tmp | BIT(3) | BIT(4)); diff --git a/drivers/staging/rtlwifi/wifi.h b/drivers/staging/rtlwifi/wifi.h index 012fb618840b..a45f0eb69d3f 100644 --- a/drivers/staging/rtlwifi/wifi.h +++ b/drivers/staging/rtlwifi/wifi.h @@ -88,6 +88,7 @@ #define RTL_USB_MAX_RX_COUNT 100 #define QBSS_LOAD_SIZE 5 #define MAX_WMMELE_LENGTH 64 +#define ASPM_L1_LATENCY 7 #define TOTAL_CAM_ENTRY 32 -- cgit v1.2.3 From e240cd0df48185a28c153f83a39ba3940e3e9b86 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 6 Jul 2018 19:06:43 +0200 Subject: netfilter: nf_tables: place all set backends in one single module This patch disallows rbtree with single elements, which is causing problems with the recent timeout support. Before this patch, you could opt out individual set representations per module, which is just adding extra complexity. Fixes: 8d8540c4f5e0("netfilter: nft_set_rbtree: add timeout support") Reported-by: Taehee Yoo Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_tables_core.h | 6 ++++++ net/netfilter/Kconfig | 25 +++++++------------------ net/netfilter/Makefile | 7 ++++--- net/netfilter/nf_tables_set_core.c | 28 ++++++++++++++++++++++++++++ net/netfilter/nft_set_bitmap.c | 19 +------------------ net/netfilter/nft_set_hash.c | 29 +++-------------------------- net/netfilter/nft_set_rbtree.c | 19 +------------------ 7 files changed, 50 insertions(+), 83 deletions(-) create mode 100644 net/netfilter/nf_tables_set_core.c diff --git a/include/net/netfilter/nf_tables_core.h b/include/net/netfilter/nf_tables_core.h index e0c0c2558ec4..a05134507e7b 100644 --- a/include/net/netfilter/nf_tables_core.h +++ b/include/net/netfilter/nf_tables_core.h @@ -65,4 +65,10 @@ extern const struct nft_expr_ops nft_payload_fast_ops; extern struct static_key_false nft_counters_enabled; extern struct static_key_false nft_trace_enabled; +extern struct nft_set_type nft_set_rhash_type; +extern struct nft_set_type nft_set_hash_type; +extern struct nft_set_type nft_set_hash_fast_type; +extern struct nft_set_type nft_set_rbtree_type; +extern struct nft_set_type nft_set_bitmap_type; + #endif /* _NET_NF_TABLES_CORE_H */ diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index dbd7d1fad277..f0a1c536ef15 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -460,6 +460,13 @@ config NF_TABLES if NF_TABLES +config NF_TABLES_SET + tristate "Netfilter nf_tables set infrastructure" + help + This option enables the nf_tables set infrastructure that allows to + look up for elements in a set and to build one-way mappings between + matchings and actions. + config NF_TABLES_INET depends on IPV6 select NF_TABLES_IPV4 @@ -493,24 +500,6 @@ config NFT_FLOW_OFFLOAD This option adds the "flow_offload" expression that you can use to choose what flows are placed into the hardware. -config NFT_SET_RBTREE - tristate "Netfilter nf_tables rbtree set module" - help - This option adds the "rbtree" set type (Red Black tree) that is used - to build interval-based sets. - -config NFT_SET_HASH - tristate "Netfilter nf_tables hash set module" - help - This option adds the "hash" set type that is used to build one-way - mappings between matchings and actions. - -config NFT_SET_BITMAP - tristate "Netfilter nf_tables bitmap set module" - help - This option adds the "bitmap" set type that is used to build sets - whose keys are smaller or equal to 16 bits. - config NFT_COUNTER tristate "Netfilter nf_tables counter module" help diff --git a/net/netfilter/Makefile b/net/netfilter/Makefile index 44449389e527..8a76dced974d 100644 --- a/net/netfilter/Makefile +++ b/net/netfilter/Makefile @@ -78,7 +78,11 @@ nf_tables-objs := nf_tables_core.o nf_tables_api.o nft_chain_filter.o \ nft_bitwise.o nft_byteorder.o nft_payload.o nft_lookup.o \ nft_dynset.o nft_meta.o nft_rt.o nft_exthdr.o +nf_tables_set-objs := nf_tables_set_core.o \ + nft_set_hash.o nft_set_bitmap.o nft_set_rbtree.o + obj-$(CONFIG_NF_TABLES) += nf_tables.o +obj-$(CONFIG_NF_TABLES_SET) += nf_tables_set.o obj-$(CONFIG_NFT_COMPAT) += nft_compat.o obj-$(CONFIG_NFT_CONNLIMIT) += nft_connlimit.o obj-$(CONFIG_NFT_NUMGEN) += nft_numgen.o @@ -91,9 +95,6 @@ obj-$(CONFIG_NFT_QUEUE) += nft_queue.o obj-$(CONFIG_NFT_QUOTA) += nft_quota.o obj-$(CONFIG_NFT_REJECT) += nft_reject.o obj-$(CONFIG_NFT_REJECT_INET) += nft_reject_inet.o -obj-$(CONFIG_NFT_SET_RBTREE) += nft_set_rbtree.o -obj-$(CONFIG_NFT_SET_HASH) += nft_set_hash.o -obj-$(CONFIG_NFT_SET_BITMAP) += nft_set_bitmap.o obj-$(CONFIG_NFT_COUNTER) += nft_counter.o obj-$(CONFIG_NFT_LOG) += nft_log.o obj-$(CONFIG_NFT_MASQ) += nft_masq.o diff --git a/net/netfilter/nf_tables_set_core.c b/net/netfilter/nf_tables_set_core.c new file mode 100644 index 000000000000..814789644bd3 --- /dev/null +++ b/net/netfilter/nf_tables_set_core.c @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include + +static int __init nf_tables_set_module_init(void) +{ + nft_register_set(&nft_set_hash_fast_type); + nft_register_set(&nft_set_hash_type); + nft_register_set(&nft_set_rhash_type); + nft_register_set(&nft_set_bitmap_type); + nft_register_set(&nft_set_rbtree_type); + + return 0; +} + +static void __exit nf_tables_set_module_exit(void) +{ + nft_unregister_set(&nft_set_rbtree_type); + nft_unregister_set(&nft_set_bitmap_type); + nft_unregister_set(&nft_set_rhash_type); + nft_unregister_set(&nft_set_hash_type); + nft_unregister_set(&nft_set_hash_fast_type); +} + +module_init(nf_tables_set_module_init); +module_exit(nf_tables_set_module_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS_NFT_SET(); diff --git a/net/netfilter/nft_set_bitmap.c b/net/netfilter/nft_set_bitmap.c index d6626e01c7ee..128bc16f52dd 100644 --- a/net/netfilter/nft_set_bitmap.c +++ b/net/netfilter/nft_set_bitmap.c @@ -296,7 +296,7 @@ static bool nft_bitmap_estimate(const struct nft_set_desc *desc, u32 features, return true; } -static struct nft_set_type nft_bitmap_type __read_mostly = { +struct nft_set_type nft_set_bitmap_type __read_mostly = { .owner = THIS_MODULE, .ops = { .privsize = nft_bitmap_privsize, @@ -314,20 +314,3 @@ static struct nft_set_type nft_bitmap_type __read_mostly = { .get = nft_bitmap_get, }, }; - -static int __init nft_bitmap_module_init(void) -{ - return nft_register_set(&nft_bitmap_type); -} - -static void __exit nft_bitmap_module_exit(void) -{ - nft_unregister_set(&nft_bitmap_type); -} - -module_init(nft_bitmap_module_init); -module_exit(nft_bitmap_module_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Pablo Neira Ayuso "); -MODULE_ALIAS_NFT_SET(); diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c index 6f9a1365a09f..72ef35b51cac 100644 --- a/net/netfilter/nft_set_hash.c +++ b/net/netfilter/nft_set_hash.c @@ -654,7 +654,7 @@ static bool nft_hash_fast_estimate(const struct nft_set_desc *desc, u32 features return true; } -static struct nft_set_type nft_rhash_type __read_mostly = { +struct nft_set_type nft_set_rhash_type __read_mostly = { .owner = THIS_MODULE, .features = NFT_SET_MAP | NFT_SET_OBJECT | NFT_SET_TIMEOUT | NFT_SET_EVAL, @@ -677,7 +677,7 @@ static struct nft_set_type nft_rhash_type __read_mostly = { }, }; -static struct nft_set_type nft_hash_type __read_mostly = { +struct nft_set_type nft_set_hash_type __read_mostly = { .owner = THIS_MODULE, .features = NFT_SET_MAP | NFT_SET_OBJECT, .ops = { @@ -697,7 +697,7 @@ static struct nft_set_type nft_hash_type __read_mostly = { }, }; -static struct nft_set_type nft_hash_fast_type __read_mostly = { +struct nft_set_type nft_set_hash_fast_type __read_mostly = { .owner = THIS_MODULE, .features = NFT_SET_MAP | NFT_SET_OBJECT, .ops = { @@ -716,26 +716,3 @@ static struct nft_set_type nft_hash_fast_type __read_mostly = { .get = nft_hash_get, }, }; - -static int __init nft_hash_module_init(void) -{ - if (nft_register_set(&nft_hash_fast_type) || - nft_register_set(&nft_hash_type) || - nft_register_set(&nft_rhash_type)) - return 1; - return 0; -} - -static void __exit nft_hash_module_exit(void) -{ - nft_unregister_set(&nft_rhash_type); - nft_unregister_set(&nft_hash_type); - nft_unregister_set(&nft_hash_fast_type); -} - -module_init(nft_hash_module_init); -module_exit(nft_hash_module_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Patrick McHardy "); -MODULE_ALIAS_NFT_SET(); diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c index 7f3a9a211034..1f8f257cb518 100644 --- a/net/netfilter/nft_set_rbtree.c +++ b/net/netfilter/nft_set_rbtree.c @@ -462,7 +462,7 @@ static bool nft_rbtree_estimate(const struct nft_set_desc *desc, u32 features, return true; } -static struct nft_set_type nft_rbtree_type __read_mostly = { +struct nft_set_type nft_set_rbtree_type __read_mostly = { .owner = THIS_MODULE, .features = NFT_SET_INTERVAL | NFT_SET_MAP | NFT_SET_OBJECT | NFT_SET_TIMEOUT, .ops = { @@ -481,20 +481,3 @@ static struct nft_set_type nft_rbtree_type __read_mostly = { .get = nft_rbtree_get, }, }; - -static int __init nft_rbtree_module_init(void) -{ - return nft_register_set(&nft_rbtree_type); -} - -static void __exit nft_rbtree_module_exit(void) -{ - nft_unregister_set(&nft_rbtree_type); -} - -module_init(nft_rbtree_module_init); -module_exit(nft_rbtree_module_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Patrick McHardy "); -MODULE_ALIAS_NFT_SET(); -- cgit v1.2.3 From 53a710b5044d8475faa6813000b6dd659400ef7b Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:12:39 +0300 Subject: sh_eth: fix invalid context bug while calling auto-negotiation by ethtool Since commit 35b5f6b1a82b ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however the helper function is called in atomic context. The bug can be reproduced by running "ethtool -r" command, the bug is reported if CONFIG_DEBUG_ATOMIC_SLEEP build option is enabled. Fixes: dc19e4e5e02f ("sh: sh_eth: Add support ethtool") Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index e9007b613f17..e8aca46bb925 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2265,18 +2265,10 @@ static void sh_eth_get_regs(struct net_device *ndev, struct ethtool_regs *regs, static int sh_eth_nway_reset(struct net_device *ndev) { - struct sh_eth_private *mdp = netdev_priv(ndev); - unsigned long flags; - int ret; - if (!ndev->phydev) return -ENODEV; - spin_lock_irqsave(&mdp->lock, flags); - ret = phy_start_aneg(ndev->phydev); - spin_unlock_irqrestore(&mdp->lock, flags); - - return ret; + return phy_start_aneg(ndev->phydev); } static u32 sh_eth_get_msglevel(struct net_device *ndev) -- cgit v1.2.3 From 5cb3f52a11e18628fc4bee76dd14b1f0b76349de Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:12:40 +0300 Subject: sh_eth: fix invalid context bug while changing link options by ethtool The change fixes sleep in atomic context bug, which is encountered every time when link settings are changed by ethtool. Since commit 35b5f6b1a82b ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however that helper function is called in atomic context under a grabbed spinlock, because phy_start_aneg() is called by phy_ethtool_ksettings_set() and by replaced phy_ethtool_sset() helpers from phylib. Now duplex mode setting is enforced in sh_eth_adjust_link() only, also now RX/TX is disabled when link is put down or modifications to E-MAC registers ECMR and GECMR are expected for both cases of checked and ignored link status pin state from E-MAC interrupt handler. For reference the change is a partial rework of commit 1e1b812bbe10 ("sh_eth: fix handling of no LINK signal"). Fixes: dc19e4e5e02f ("sh: sh_eth: Add support ethtool") Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 49 +++++++++++------------------------ 1 file changed, 15 insertions(+), 34 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index e8aca46bb925..8e429e865552 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1927,8 +1927,15 @@ static void sh_eth_adjust_link(struct net_device *ndev) { struct sh_eth_private *mdp = netdev_priv(ndev); struct phy_device *phydev = ndev->phydev; + unsigned long flags; int new_state = 0; + spin_lock_irqsave(&mdp->lock, flags); + + /* Disable TX and RX right over here, if E-MAC change is ignored */ + if (mdp->cd->no_psr || mdp->no_ether_link) + sh_eth_rcv_snd_disable(ndev); + if (phydev->link) { if (phydev->duplex != mdp->duplex) { new_state = 1; @@ -1947,18 +1954,21 @@ static void sh_eth_adjust_link(struct net_device *ndev) sh_eth_modify(ndev, ECMR, ECMR_TXF, 0); new_state = 1; mdp->link = phydev->link; - if (mdp->cd->no_psr || mdp->no_ether_link) - sh_eth_rcv_snd_enable(ndev); } } else if (mdp->link) { new_state = 1; mdp->link = 0; mdp->speed = 0; mdp->duplex = -1; - if (mdp->cd->no_psr || mdp->no_ether_link) - sh_eth_rcv_snd_disable(ndev); } + /* Enable TX and RX right over here, if E-MAC change is ignored */ + if ((mdp->cd->no_psr || mdp->no_ether_link) && phydev->link) + sh_eth_rcv_snd_enable(ndev); + + mmiowb(); + spin_unlock_irqrestore(&mdp->lock, flags); + if (new_state && netif_msg_link(mdp)) phy_print_status(phydev); } @@ -2049,39 +2059,10 @@ static int sh_eth_get_link_ksettings(struct net_device *ndev, static int sh_eth_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *cmd) { - struct sh_eth_private *mdp = netdev_priv(ndev); - unsigned long flags; - int ret; - if (!ndev->phydev) return -ENODEV; - spin_lock_irqsave(&mdp->lock, flags); - - /* disable tx and rx */ - sh_eth_rcv_snd_disable(ndev); - - ret = phy_ethtool_ksettings_set(ndev->phydev, cmd); - if (ret) - goto error_exit; - - if (cmd->base.duplex == DUPLEX_FULL) - mdp->duplex = 1; - else - mdp->duplex = 0; - - if (mdp->cd->set_duplex) - mdp->cd->set_duplex(ndev); - -error_exit: - mdelay(1); - - /* enable tx and rx */ - sh_eth_rcv_snd_enable(ndev); - - spin_unlock_irqrestore(&mdp->lock, flags); - - return ret; + return phy_ethtool_ksettings_set(ndev->phydev, cmd); } /* If it is ever necessary to increase SH_ETH_REG_DUMP_MAX_REGS, the -- cgit v1.2.3 From e0afa1030b7ffc2fb68d38fb859837f13cdd3807 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:12:41 +0300 Subject: sh_eth: simplify link auto-negotiation by ethtool There is no need to call a heavyweight phy_start_aneg() for phy auto-negotiation by ethtool, the phy is already initialized and link auto-negotiation is started by calling phy_start() from sh_eth_phy_start() when a network device is opened. Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 8e429e865552..1bed2ee4d709 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2249,7 +2249,7 @@ static int sh_eth_nway_reset(struct net_device *ndev) if (!ndev->phydev) return -ENODEV; - return phy_start_aneg(ndev->phydev); + return phy_restart_aneg(ndev->phydev); } static u32 sh_eth_get_msglevel(struct net_device *ndev) -- cgit v1.2.3 From 4c10628afda78dbf5dffc13360b576370ee98aab Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:12:42 +0300 Subject: sh_eth: remove custom .nway_reset from ethtool ops The generic phy_ethtool_nway_reset() function from phylib can be used instead of in-house sh_eth_nway_reset(). Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 1bed2ee4d709..50ff18870be2 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2244,14 +2244,6 @@ static void sh_eth_get_regs(struct net_device *ndev, struct ethtool_regs *regs, pm_runtime_put_sync(&mdp->pdev->dev); } -static int sh_eth_nway_reset(struct net_device *ndev) -{ - if (!ndev->phydev) - return -ENODEV; - - return phy_restart_aneg(ndev->phydev); -} - static u32 sh_eth_get_msglevel(struct net_device *ndev) { struct sh_eth_private *mdp = netdev_priv(ndev); @@ -2402,7 +2394,7 @@ static int sh_eth_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol) static const struct ethtool_ops sh_eth_ethtool_ops = { .get_regs_len = sh_eth_get_regs_len, .get_regs = sh_eth_get_regs, - .nway_reset = sh_eth_nway_reset, + .nway_reset = phy_ethtool_nway_reset, .get_msglevel = sh_eth_get_msglevel, .set_msglevel = sh_eth_set_msglevel, .get_link = ethtool_op_get_link, -- cgit v1.2.3 From f3146f3774c8657b25326313ce807a5d4eac1d40 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:14:47 +0300 Subject: sh_eth: remove useless serialization in sh_eth_get_link_ksettings() phy_ethtool_ksettings_get() call does not modify device state or device driver state, hence there is no need to utilize a driver specific spinlock. Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 50ff18870be2..152edd1e9a23 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2043,15 +2043,10 @@ static int sh_eth_phy_start(struct net_device *ndev) static int sh_eth_get_link_ksettings(struct net_device *ndev, struct ethtool_link_ksettings *cmd) { - struct sh_eth_private *mdp = netdev_priv(ndev); - unsigned long flags; - if (!ndev->phydev) return -ENODEV; - spin_lock_irqsave(&mdp->lock, flags); phy_ethtool_ksettings_get(ndev->phydev, cmd); - spin_unlock_irqrestore(&mdp->lock, flags); return 0; } -- cgit v1.2.3 From 45abbd431939fe77b365949e946fb29094d72656 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:14:48 +0300 Subject: sh_eth: remove custom .get_link_ksettings from ethtool ops The generic phy_ethtool_get_link_ksettings() function from phylib can be used instead of in-house sh_eth_get_link_ksettings(). Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 152edd1e9a23..bd4a0b9c3362 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2040,17 +2040,6 @@ static int sh_eth_phy_start(struct net_device *ndev) return 0; } -static int sh_eth_get_link_ksettings(struct net_device *ndev, - struct ethtool_link_ksettings *cmd) -{ - if (!ndev->phydev) - return -ENODEV; - - phy_ethtool_ksettings_get(ndev->phydev, cmd); - - return 0; -} - static int sh_eth_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *cmd) { @@ -2398,7 +2387,7 @@ static const struct ethtool_ops sh_eth_ethtool_ops = { .get_sset_count = sh_eth_get_sset_count, .get_ringparam = sh_eth_get_ringparam, .set_ringparam = sh_eth_set_ringparam, - .get_link_ksettings = sh_eth_get_link_ksettings, + .get_link_ksettings = phy_ethtool_get_link_ksettings, .set_link_ksettings = sh_eth_set_link_ksettings, .get_wol = sh_eth_get_wol, .set_wol = sh_eth_set_wol, -- cgit v1.2.3 From 6783f50ed144aafe8c3aceb223db2c7956278a1f Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:14:49 +0300 Subject: sh_eth: remove custom .set_link_ksettings from ethtool ops The generic phy_ethtool_set_link_ksettings() function from phylib can be used instead of in-house sh_eth_set_link_ksettings(). Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index bd4a0b9c3362..5614fd231bbe 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2040,15 +2040,6 @@ static int sh_eth_phy_start(struct net_device *ndev) return 0; } -static int sh_eth_set_link_ksettings(struct net_device *ndev, - const struct ethtool_link_ksettings *cmd) -{ - if (!ndev->phydev) - return -ENODEV; - - return phy_ethtool_ksettings_set(ndev->phydev, cmd); -} - /* If it is ever necessary to increase SH_ETH_REG_DUMP_MAX_REGS, the * version must be bumped as well. Just adding registers up to that * limit is fine, as long as the existing register indices don't @@ -2388,7 +2379,7 @@ static const struct ethtool_ops sh_eth_ethtool_ops = { .get_ringparam = sh_eth_get_ringparam, .set_ringparam = sh_eth_set_ringparam, .get_link_ksettings = phy_ethtool_get_link_ksettings, - .set_link_ksettings = sh_eth_set_link_ksettings, + .set_link_ksettings = phy_ethtool_set_link_ksettings, .get_wol = sh_eth_get_wol, .set_wol = sh_eth_set_wol, }; -- cgit v1.2.3 From 0973a4dd79fe56a3beecfcff675ba4c01df0b0c1 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:14:50 +0300 Subject: ravb: fix invalid context bug while calling auto-negotiation by ethtool Since commit 35b5f6b1a82b ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however the helper function is called in atomic context. The bug can be reproduced by running "ethtool -r" command, the bug is reported if CONFIG_DEBUG_ATOMIC_SLEEP build option is enabled. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 68f122140966..e7d6d1b6e7d6 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1152,15 +1152,10 @@ error_exit: static int ravb_nway_reset(struct net_device *ndev) { - struct ravb_private *priv = netdev_priv(ndev); int error = -ENODEV; - unsigned long flags; - if (ndev->phydev) { - spin_lock_irqsave(&priv->lock, flags); + if (ndev->phydev) error = phy_start_aneg(ndev->phydev); - spin_unlock_irqrestore(&priv->lock, flags); - } return error; } -- cgit v1.2.3 From 05925e52a7d379192a5fdff2c33710f573190ead Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:14:51 +0300 Subject: ravb: fix invalid context bug while changing link options by ethtool The change fixes sleep in atomic context bug, which is encountered every time when link settings are changed by ethtool. Since commit 35b5f6b1a82b ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however that helper function is called in atomic context under a grabbed spinlock, because phy_start_aneg() is called by phy_ethtool_ksettings_set() and by replaced phy_ethtool_sset() helpers from phylib. Now duplex mode setting is enforced in ravb_adjust_link() only, also now RX/TX is disabled when link is put down or modifications to E-MAC registers ECMR and GECMR are expected for both cases of checked and ignored link status pin state from E-MAC interrupt handler. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 49 ++++++++++---------------------- 1 file changed, 15 insertions(+), 34 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index e7d6d1b6e7d6..40266fe01186 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -980,6 +980,13 @@ static void ravb_adjust_link(struct net_device *ndev) struct ravb_private *priv = netdev_priv(ndev); struct phy_device *phydev = ndev->phydev; bool new_state = false; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + + /* Disable TX and RX right over here, if E-MAC change is ignored */ + if (priv->no_avb_link) + ravb_rcv_snd_disable(ndev); if (phydev->link) { if (phydev->duplex != priv->duplex) { @@ -997,18 +1004,21 @@ static void ravb_adjust_link(struct net_device *ndev) ravb_modify(ndev, ECMR, ECMR_TXF, 0); new_state = true; priv->link = phydev->link; - if (priv->no_avb_link) - ravb_rcv_snd_enable(ndev); } } else if (priv->link) { new_state = true; priv->link = 0; priv->speed = 0; priv->duplex = -1; - if (priv->no_avb_link) - ravb_rcv_snd_disable(ndev); } + /* Enable TX and RX right over here, if E-MAC change is ignored */ + if (priv->no_avb_link && phydev->link) + ravb_rcv_snd_enable(ndev); + + mmiowb(); + spin_unlock_irqrestore(&priv->lock, flags); + if (new_state && netif_msg_link(priv)) phy_print_status(phydev); } @@ -1115,39 +1125,10 @@ static int ravb_get_link_ksettings(struct net_device *ndev, static int ravb_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *cmd) { - struct ravb_private *priv = netdev_priv(ndev); - unsigned long flags; - int error; - if (!ndev->phydev) return -ENODEV; - spin_lock_irqsave(&priv->lock, flags); - - /* Disable TX and RX */ - ravb_rcv_snd_disable(ndev); - - error = phy_ethtool_ksettings_set(ndev->phydev, cmd); - if (error) - goto error_exit; - - if (cmd->base.duplex == DUPLEX_FULL) - priv->duplex = 1; - else - priv->duplex = 0; - - ravb_set_duplex(ndev); - -error_exit: - mdelay(1); - - /* Enable TX and RX */ - ravb_rcv_snd_enable(ndev); - - mmiowb(); - spin_unlock_irqrestore(&priv->lock, flags); - - return error; + return phy_ethtool_ksettings_set(ndev->phydev, cmd); } static int ravb_nway_reset(struct net_device *ndev) -- cgit v1.2.3 From 2a150c504ac20bd978ae599ba8139e6658d64fd7 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:16:08 +0300 Subject: ravb: simplify link auto-negotiation by ethtool There is no need to call a heavyweight phy_start_aneg() for phy auto-negotiation by ethtool, the phy is already initialized and link auto-negotiation is started by calling phy_start() from ravb_phy_start() when a network device is opened. Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 40266fe01186..31913a469001 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1136,7 +1136,7 @@ static int ravb_nway_reset(struct net_device *ndev) int error = -ENODEV; if (ndev->phydev) - error = phy_start_aneg(ndev->phydev); + error = phy_restart_aneg(ndev->phydev); return error; } -- cgit v1.2.3 From eeb07284717be2950c3b501df2debc0373eae19a Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:16:09 +0300 Subject: ravb: remove custom .nway_reset from ethtool ops The generic phy_ethtool_nway_reset() function from phylib can be used instead of in-house ravb_nway_reset(). Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 31913a469001..6002132093cd 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1131,16 +1131,6 @@ static int ravb_set_link_ksettings(struct net_device *ndev, return phy_ethtool_ksettings_set(ndev->phydev, cmd); } -static int ravb_nway_reset(struct net_device *ndev) -{ - int error = -ENODEV; - - if (ndev->phydev) - error = phy_restart_aneg(ndev->phydev); - - return error; -} - static u32 ravb_get_msglevel(struct net_device *ndev) { struct ravb_private *priv = netdev_priv(ndev); @@ -1353,7 +1343,7 @@ static int ravb_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol) } static const struct ethtool_ops ravb_ethtool_ops = { - .nway_reset = ravb_nway_reset, + .nway_reset = phy_ethtool_nway_reset, .get_msglevel = ravb_get_msglevel, .set_msglevel = ravb_set_msglevel, .get_link = ethtool_op_get_link, -- cgit v1.2.3 From efdf75112d89e28c928a22c3a38456b49927f445 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:16:10 +0300 Subject: ravb: remove useless serialization in ravb_get_link_ksettings() phy_ethtool_ksettings_get() call does not modify device state or device driver state, hence there is no need to utilize a driver specific spinlock. Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 6002132093cd..772687a5faee 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1109,15 +1109,10 @@ static int ravb_phy_start(struct net_device *ndev) static int ravb_get_link_ksettings(struct net_device *ndev, struct ethtool_link_ksettings *cmd) { - struct ravb_private *priv = netdev_priv(ndev); - unsigned long flags; - if (!ndev->phydev) return -ENODEV; - spin_lock_irqsave(&priv->lock, flags); phy_ethtool_ksettings_get(ndev->phydev, cmd); - spin_unlock_irqrestore(&priv->lock, flags); return 0; } -- cgit v1.2.3 From 468e40b5fe4fe18e8468dfd03ba4457a9102d066 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:16:11 +0300 Subject: ravb: remove custom .get_link_ksettings from ethtool ops The generic phy_ethtool_get_link_ksettings() function from phylib can be used instead of in-house ravb_get_link_ksettings(). Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 772687a5faee..9fe01259be6f 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1106,17 +1106,6 @@ static int ravb_phy_start(struct net_device *ndev) return 0; } -static int ravb_get_link_ksettings(struct net_device *ndev, - struct ethtool_link_ksettings *cmd) -{ - if (!ndev->phydev) - return -ENODEV; - - phy_ethtool_ksettings_get(ndev->phydev, cmd); - - return 0; -} - static int ravb_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *cmd) { @@ -1348,7 +1337,7 @@ static const struct ethtool_ops ravb_ethtool_ops = { .get_ringparam = ravb_get_ringparam, .set_ringparam = ravb_set_ringparam, .get_ts_info = ravb_get_ts_info, - .get_link_ksettings = ravb_get_link_ksettings, + .get_link_ksettings = phy_ethtool_get_link_ksettings, .set_link_ksettings = ravb_set_link_ksettings, .get_wol = ravb_get_wol, .set_wol = ravb_set_wol, -- cgit v1.2.3 From 44f3d5581ebbdff59311d45cf862d2e040aeefeb Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:16:12 +0300 Subject: ravb: remove custom .set_link_ksettings from ethtool ops The generic phy_ethtool_set_link_ksettings() function from phylib can be used instead of in-house ravb_set_link_ksettings(). Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 9fe01259be6f..0d811c02ff34 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1106,15 +1106,6 @@ static int ravb_phy_start(struct net_device *ndev) return 0; } -static int ravb_set_link_ksettings(struct net_device *ndev, - const struct ethtool_link_ksettings *cmd) -{ - if (!ndev->phydev) - return -ENODEV; - - return phy_ethtool_ksettings_set(ndev->phydev, cmd); -} - static u32 ravb_get_msglevel(struct net_device *ndev) { struct ravb_private *priv = netdev_priv(ndev); @@ -1338,7 +1329,7 @@ static const struct ethtool_ops ravb_ethtool_ops = { .set_ringparam = ravb_set_ringparam, .get_ts_info = ravb_get_ts_info, .get_link_ksettings = phy_ethtool_get_link_ksettings, - .set_link_ksettings = ravb_set_link_ksettings, + .set_link_ksettings = phy_ethtool_set_link_ksettings, .get_wol = ravb_get_wol, .set_wol = ravb_set_wol, }; -- cgit v1.2.3 From a0341fc1981a950c1e902ab901e98f60e0e243f3 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Sat, 7 Jul 2018 04:16:33 +0200 Subject: ibmasm: don't write out of bounds in read handler This read handler had a lot of custom logic and wrote outside the bounds of the provided buffer. This could lead to kernel and userspace memory corruption. Just use simple_read_from_buffer() with a stack buffer. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ibmasm/ibmasmfs.c | 27 +++------------------------ 1 file changed, 3 insertions(+), 24 deletions(-) diff --git a/drivers/misc/ibmasm/ibmasmfs.c b/drivers/misc/ibmasm/ibmasmfs.c index e05c3245930a..fa840666bdd1 100644 --- a/drivers/misc/ibmasm/ibmasmfs.c +++ b/drivers/misc/ibmasm/ibmasmfs.c @@ -507,35 +507,14 @@ static int remote_settings_file_close(struct inode *inode, struct file *file) static ssize_t remote_settings_file_read(struct file *file, char __user *buf, size_t count, loff_t *offset) { void __iomem *address = (void __iomem *)file->private_data; - unsigned char *page; - int retval; int len = 0; unsigned int value; - - if (*offset < 0) - return -EINVAL; - if (count == 0 || count > 1024) - return 0; - if (*offset != 0) - return 0; - - page = (unsigned char *)__get_free_page(GFP_KERNEL); - if (!page) - return -ENOMEM; + char lbuf[20]; value = readl(address); - len = sprintf(page, "%d\n", value); - - if (copy_to_user(buf, page, len)) { - retval = -EFAULT; - goto exit; - } - *offset += len; - retval = len; + len = snprintf(lbuf, sizeof(lbuf), "%d\n", value); -exit: - free_page((unsigned long)page); - return retval; + return simple_read_from_buffer(buf, count, offset, lbuf, len); } static ssize_t remote_settings_file_write(struct file *file, const char __user *ubuff, size_t count, loff_t *offset) -- cgit v1.2.3 From 2a57f182420174c7fd4b19db979a2d135231a963 Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Fri, 6 Jul 2018 20:10:03 +0200 Subject: tipc: fix wrong return value from function tipc_node_try_addr() The function for checking if there is an node address conflict is supposed to return a suggestion for a new address if it finds a conflict, and zero otherwise. But in case the peer being checked is previously unknown it does instead return a "suggestion" for the checked address itself. This results in a DSC_TRIAL_FAIL_MSG being sent unecessarily to the peer, and sometimes makes the trial period starting over again. Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values") Signed-off-by: Jon Maloy Signed-off-by: David S. Miller --- net/tipc/node.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/tipc/node.c b/net/tipc/node.c index 6a44eb812baf..0453bd451ce8 100644 --- a/net/tipc/node.c +++ b/net/tipc/node.c @@ -797,6 +797,7 @@ static u32 tipc_node_suggest_addr(struct net *net, u32 addr) } /* tipc_node_try_addr(): Check if addr can be used by peer, suggest other if not + * Returns suggested address if any, otherwise 0 */ u32 tipc_node_try_addr(struct net *net, u8 *id, u32 addr) { @@ -819,12 +820,14 @@ u32 tipc_node_try_addr(struct net *net, u8 *id, u32 addr) if (n) { addr = n->addr; tipc_node_put(n); + return addr; } - /* Even this node may be in trial phase */ + + /* Even this node may be in conflict */ if (tn->trial_addr == addr) return tipc_node_suggest_addr(net, addr); - return addr; + return 0; } void tipc_node_check_dest(struct net *net, u32 addr, -- cgit v1.2.3 From e415577f57f4452150642500364cbe5fa6112813 Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Fri, 6 Jul 2018 20:10:04 +0200 Subject: tipc: correct discovery message handling during address trial period With the duplicate address discovery protocol for tipc nodes addresses we introduced a one second trial period before a node is allocated a hash number to use as address. Unfortunately, we miss to handle the case when a regular LINK REQUEST/ RESPONSE arrives from a cluster node during the trial period. Such messages are not ignored as they should be, leading to links setup attempts while the node still has no address. Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values") Signed-off-by: Jon Maloy Signed-off-by: David S. Miller --- net/tipc/discover.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/tipc/discover.c b/net/tipc/discover.c index 9f666e0650e2..dcadc10dffd1 100644 --- a/net/tipc/discover.c +++ b/net/tipc/discover.c @@ -133,6 +133,8 @@ static void disc_dupl_alert(struct tipc_bearer *b, u32 node_addr, } /* tipc_disc_addr_trial(): - handle an address uniqueness trial from peer + * Returns true if message should be dropped by caller, i.e., if it is a + * trial message or we are inside trial period. Otherwise false. */ static bool tipc_disc_addr_trial_msg(struct tipc_discoverer *d, struct tipc_media_addr *maddr, @@ -168,8 +170,9 @@ static bool tipc_disc_addr_trial_msg(struct tipc_discoverer *d, msg_set_type(buf_msg(d->skb), DSC_REQ_MSG); } + /* Accept regular link requests/responses only after trial period */ if (mtyp != DSC_TRIAL_MSG) - return false; + return trial; sugg_addr = tipc_node_try_addr(net, peer_id, src); if (sugg_addr) -- cgit v1.2.3 From 92018c7ca959ccd346d6235dac03cf7fc1ba51f7 Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Fri, 6 Jul 2018 20:10:05 +0200 Subject: tipc: fix correct setting of message type in second discoverer The duplicate address discovery protocol is not safe against two discoverers running in parallel. The one executing first after the trial period is over will set the node address and change its own message type to DSC_REQ_MSG. The one executing last may find that the node address is already set, and never change message type, with the result that its links may never be established. In this commmit we ensure that the message type always is set correctly after the trial period is over. Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values") Signed-off-by: Jon Maloy Signed-off-by: David S. Miller --- net/tipc/discover.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/net/tipc/discover.c b/net/tipc/discover.c index dcadc10dffd1..2830709957bd 100644 --- a/net/tipc/discover.c +++ b/net/tipc/discover.c @@ -287,7 +287,6 @@ static void tipc_disc_timeout(struct timer_list *t) { struct tipc_discoverer *d = from_timer(d, t, timer); struct tipc_net *tn = tipc_net(d->net); - u32 self = tipc_own_addr(d->net); struct tipc_media_addr maddr; struct sk_buff *skb = NULL; struct net *net = d->net; @@ -301,12 +300,14 @@ static void tipc_disc_timeout(struct timer_list *t) goto exit; } - /* Did we just leave the address trial period ? */ - if (!self && !time_before(jiffies, tn->addr_trial_end)) { - self = tn->trial_addr; - tipc_net_finalize(net, self); - msg_set_prevnode(buf_msg(d->skb), self); + /* Trial period over ? */ + if (!time_before(jiffies, tn->addr_trial_end)) { + /* Did we just leave it ? */ + if (!tipc_own_addr(net)) + tipc_net_finalize(net, tn->trial_addr); + msg_set_type(buf_msg(d->skb), DSC_REQ_MSG); + msg_set_prevnode(buf_msg(d->skb), tipc_own_addr(net)); } /* Adjust timeout interval according to discovery phase */ -- cgit v1.2.3 From 9faa89d4ed9d7d326f4763d262842270450f9b1f Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Fri, 6 Jul 2018 20:10:06 +0200 Subject: tipc: make function tipc_net_finalize() thread safe The setting of the node address is not thread safe, meaning that two discoverers may decide to set it simultanously, with a duplicate entry in the name table as result. We fix that with this commit. Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values") Signed-off-by: Jon Maloy Signed-off-by: David S. Miller --- net/tipc/net.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/net/tipc/net.c b/net/tipc/net.c index 4fbaa0464405..a7f6964c3a4b 100644 --- a/net/tipc/net.c +++ b/net/tipc/net.c @@ -121,12 +121,17 @@ int tipc_net_init(struct net *net, u8 *node_id, u32 addr) void tipc_net_finalize(struct net *net, u32 addr) { - tipc_set_node_addr(net, addr); - smp_mb(); - tipc_named_reinit(net); - tipc_sk_reinit(net); - tipc_nametbl_publish(net, TIPC_CFG_SRV, addr, addr, - TIPC_CLUSTER_SCOPE, 0, addr); + struct tipc_net *tn = tipc_net(net); + + spin_lock_bh(&tn->node_list_lock); + if (!tipc_own_addr(net)) { + tipc_set_node_addr(net, addr); + tipc_named_reinit(net); + tipc_sk_reinit(net); + tipc_nametbl_publish(net, TIPC_CFG_SRV, addr, addr, + TIPC_CLUSTER_SCOPE, 0, addr); + } + spin_unlock_bh(&tn->node_list_lock); } void tipc_net_stop(struct net *net) -- cgit v1.2.3 From 843789f6dd6ae1651a77ac99c13bcaf191ebe05c Mon Sep 17 00:00:00 2001 From: Casey Leedom Date: Sat, 7 Jul 2018 12:38:07 +0530 Subject: cxgb4: assume flash part size to be 4MB, if it can't be determined t4_get_flash_params() fails in a fatal fashion if the FLASH part isn't one of the recognized parts. But this leads to desperate efforts to update drivers when various FLASH parts which we are using suddenly become unavailable and we need to substitute new FLASH parts. This has lead to more than one Customer Field Emergency when a Customer has an old driver and suddenly can't use newly shipped adapters. This commit fixes this by simply assuming that the FLASH part is 4MB in size if it can't be identified. Note that all Chelsio adapters will have flash parts which are at least 4MB in size. Signed-off-by: Casey Leedom Signed-off-by: Ganesh Goudar Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 35 +++++++++++------------------- 1 file changed, 13 insertions(+), 22 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 974a868a4824..3720c3e11ebb 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -8702,7 +8702,7 @@ static int t4_get_flash_params(struct adapter *adap) }; unsigned int part, manufacturer; - unsigned int density, size; + unsigned int density, size = 0; u32 flashid = 0; int ret; @@ -8772,11 +8772,6 @@ static int t4_get_flash_params(struct adapter *adap) case 0x22: /* 256MB */ size = 1 << 28; break; - - default: - dev_err(adap->pdev_dev, "Micron Flash Part has bad size, ID = %#x, Density code = %#x\n", - flashid, density); - return -EINVAL; } break; } @@ -8792,10 +8787,6 @@ static int t4_get_flash_params(struct adapter *adap) case 0x17: /* 64MB */ size = 1 << 26; break; - default: - dev_err(adap->pdev_dev, "ISSI Flash Part has bad size, ID = %#x, Density code = %#x\n", - flashid, density); - return -EINVAL; } break; } @@ -8811,10 +8802,6 @@ static int t4_get_flash_params(struct adapter *adap) case 0x18: /* 16MB */ size = 1 << 24; break; - default: - dev_err(adap->pdev_dev, "Macronix Flash Part has bad size, ID = %#x, Density code = %#x\n", - flashid, density); - return -EINVAL; } break; } @@ -8830,17 +8817,21 @@ static int t4_get_flash_params(struct adapter *adap) case 0x18: /* 16MB */ size = 1 << 24; break; - default: - dev_err(adap->pdev_dev, "Winbond Flash Part has bad size, ID = %#x, Density code = %#x\n", - flashid, density); - return -EINVAL; } break; } - default: - dev_err(adap->pdev_dev, "Unsupported Flash Part, ID = %#x\n", - flashid); - return -EINVAL; + } + + /* If we didn't recognize the FLASH part, that's no real issue: the + * Hardware/Software contract says that Hardware will _*ALWAYS*_ + * use a FLASH part which is at least 4MB in size and has 64KB + * sectors. The unrecognized FLASH part is likely to be much larger + * than 4MB, but that's all we really need. + */ + if (size == 0) { + dev_warn(adap->pdev_dev, "Unknown Flash Part, ID = %#x, assuming 4MB\n", + flashid); + size = 1 << 22; } /* Store decoded Flash size and fall through into vetting code. */ -- cgit v1.2.3 From 000244d3dc1f8114e38fe9ee2d9a0986404d9cbe Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 6 Jul 2018 14:44:02 +0200 Subject: net: bridge: fix br_vlan_get_{pvid,info} return values These two functions return the regular -EINVAL failure in the normal code path, but return a nonstandard '-1' error otherwise, which gets interpreted as -EPERM. Let's change it to -EINVAL for the dummy functions as well. Fixes: 4d4fd36126d6 ("net: bridge: Publish bridge accessor functions") Signed-off-by: Arnd Bergmann Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- include/linux/if_bridge.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h index 7843b98e1c6e..c20c7e197d07 100644 --- a/include/linux/if_bridge.h +++ b/include/linux/if_bridge.h @@ -105,13 +105,13 @@ static inline bool br_vlan_enabled(const struct net_device *dev) static inline int br_vlan_get_pvid(const struct net_device *dev, u16 *p_pvid) { - return -1; + return -EINVAL; } static inline int br_vlan_get_info(const struct net_device *dev, u16 vid, struct bridge_vlan_info *p_vinfo) { - return -1; + return -EINVAL; } #endif -- cgit v1.2.3 From e1bbdd57047454dad068dc36612dd60a57f4c58f Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Thu, 5 Jul 2018 16:15:30 +0200 Subject: net/smc: reduce sock_put() for fallback sockets smc_release() calls a sock_put() for smc fallback sockets to cover the passive closing sock_hold() in __smc_connect() and smc_tcp_listen_work(). This does not make sense for sockets in state SMC_LISTEN and SMC_INIT. An SMC socket stays in state SMC_INIT if connect fails. The sock_put in smc_connect_abort() does not cover all failures. Move it into smc_connect_decline_fallback(). Fixes: ee9dfbef02d18 ("net/smc: handle sockopts forcing fallback") Reported-by: syzbot+3a0748c8f2f210c0ef9b@syzkaller.appspotmail.com Reported-by: syzbot+9e60d2428a42049a592a@syzkaller.appspotmail.com Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/af_smc.c | 15 ++++++++++----- net/smc/smc_close.c | 2 ++ 2 files changed, 12 insertions(+), 5 deletions(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index e017b6a4452b..5334157f5065 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -147,7 +147,8 @@ static int smc_release(struct socket *sock) smc->clcsock = NULL; } if (smc->use_fallback) { - sock_put(sk); /* passive closing */ + if (sk->sk_state != SMC_LISTEN && sk->sk_state != SMC_INIT) + sock_put(sk); /* passive closing */ sk->sk_state = SMC_CLOSED; sk->sk_state_change(sk); } @@ -417,12 +418,18 @@ static int smc_connect_decline_fallback(struct smc_sock *smc, int reason_code) { int rc; - if (reason_code < 0) /* error, fallback is not possible */ + if (reason_code < 0) { /* error, fallback is not possible */ + if (smc->sk.sk_state == SMC_INIT) + sock_put(&smc->sk); /* passive closing */ return reason_code; + } if (reason_code != SMC_CLC_DECL_REPLY) { rc = smc_clc_send_decline(smc, reason_code); - if (rc < 0) + if (rc < 0) { + if (smc->sk.sk_state == SMC_INIT) + sock_put(&smc->sk); /* passive closing */ return rc; + } } return smc_connect_fallback(smc); } @@ -435,8 +442,6 @@ static int smc_connect_abort(struct smc_sock *smc, int reason_code, smc_lgr_forget(smc->conn.lgr); mutex_unlock(&smc_create_lgr_pending); smc_conn_free(&smc->conn); - if (reason_code < 0 && smc->sk.sk_state == SMC_INIT) - sock_put(&smc->sk); /* passive closing */ return reason_code; } diff --git a/net/smc/smc_close.c b/net/smc/smc_close.c index fa41d9881741..ac961dfb1ea1 100644 --- a/net/smc/smc_close.c +++ b/net/smc/smc_close.c @@ -107,6 +107,8 @@ static void smc_close_active_abort(struct smc_sock *smc) } switch (sk->sk_state) { case SMC_INIT: + sk->sk_state = SMC_PEERABORTWAIT; + break; case SMC_ACTIVE: sk->sk_state = SMC_PEERABORTWAIT; release_sock(sk); -- cgit v1.2.3 From 0c1049dcb4ceec640d8bd797335bcbebdcab44d2 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Fri, 6 Jul 2018 22:15:00 +0200 Subject: ARM: pxa: irq: fix handling of ICMR registers in suspend/resume PXA3xx platforms have 56 interrupts that are stored in two ICMR registers. The code in pxa_irq_suspend() and pxa_irq_resume() however does a simple division by 32 which only leads to one register being saved at suspend and restored at resume time. The NAND interrupt setting, for instance, is lost. Fix this by using DIV_ROUND_UP() instead. Signed-off-by: Daniel Mack Signed-off-by: Robert Jarzmik --- arch/arm/mach-pxa/irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 9c10248fadcc..4e8c2116808e 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -185,7 +185,7 @@ static int pxa_irq_suspend(void) { int i; - for (i = 0; i < pxa_internal_irq_nr / 32; i++) { + for (i = 0; i < DIV_ROUND_UP(pxa_internal_irq_nr, 32); i++) { void __iomem *base = irq_base(i); saved_icmr[i] = __raw_readl(base + ICMR); @@ -204,7 +204,7 @@ static void pxa_irq_resume(void) { int i; - for (i = 0; i < pxa_internal_irq_nr / 32; i++) { + for (i = 0; i < DIV_ROUND_UP(pxa_internal_irq_nr, 32); i++) { void __iomem *base = irq_base(i); __raw_writel(saved_icmr[i], base + ICMR); -- cgit v1.2.3 From e50b770ea5c9eff0013e8ae714d20182ed50d5e6 Mon Sep 17 00:00:00 2001 From: Harini Katakam Date: Fri, 6 Jul 2018 12:18:57 +0530 Subject: net: macb: Free RX ring for all queues rx ring is allocated for all queues in macb_alloc_consistent. Free the same for all queues instead of just Q0. Signed-off-by: Harini Katakam Reviewed-by: Claudiu Beznea Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 96cc03a6d942..2d5d0d110151 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -1812,13 +1812,7 @@ static void macb_free_consistent(struct macb *bp) struct macb_queue *queue; unsigned int q; - queue = &bp->queues[0]; bp->macbgem_ops.mog_free_rx_buffers(bp); - if (queue->rx_ring) { - dma_free_coherent(&bp->pdev->dev, RX_RING_BYTES(bp), - queue->rx_ring, queue->rx_ring_dma); - queue->rx_ring = NULL; - } for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue) { kfree(queue->tx_skb); @@ -1828,6 +1822,11 @@ static void macb_free_consistent(struct macb *bp) queue->tx_ring, queue->tx_ring_dma); queue->tx_ring = NULL; } + if (queue->rx_ring) { + dma_free_coherent(&bp->pdev->dev, RX_RING_BYTES(bp), + queue->rx_ring, queue->rx_ring_dma); + queue->rx_ring = NULL; + } } } -- cgit v1.2.3 From 404cd086f29e867fc99f1174e8f3246a4ea14b7b Mon Sep 17 00:00:00 2001 From: Harini Katakam Date: Fri, 6 Jul 2018 12:18:58 +0530 Subject: net: macb: Allocate valid memory for TX and RX BD prefetch GEM version in ZynqMP and most versions greater than r1p07 supports TX and RX BD prefetch. The number of BDs that can be prefetched is a HW configurable parameter. For ZynqMP, this parameter is 4. When GEM DMA is accessing the last BD in the ring, even before the BD is processed and the WRAP bit is noticed, it will have prefetched BDs outside the BD ring. These will not be processed but it is necessary to have accessible memory after the last BD. Especially in cases where SMMU is used, memory locations immediately after the last BD may not have translation tables triggering HRESP errors. Hence always allocate extra BDs to accommodate for prefetch. The value of tx/rx bd prefetch for any given SoC version is: 2 ^ (corresponding field in design config 10 register). (value of this field >= 1) Added a capability flag so that older IP versions that do not have DCFG10 or this prefetch capability are not affected. Signed-off-by: Harini Katakam Reviewed-by: Claudiu Beznea Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.h | 11 +++++++++++ drivers/net/ethernet/cadence/macb_main.c | 27 +++++++++++++++++++++------ 2 files changed, 32 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h index 86659823b259..3d45f4c92cf6 100644 --- a/drivers/net/ethernet/cadence/macb.h +++ b/drivers/net/ethernet/cadence/macb.h @@ -166,6 +166,7 @@ #define GEM_DCFG6 0x0294 /* Design Config 6 */ #define GEM_DCFG7 0x0298 /* Design Config 7 */ #define GEM_DCFG8 0x029C /* Design Config 8 */ +#define GEM_DCFG10 0x02A4 /* Design Config 10 */ #define GEM_TXBDCTRL 0x04cc /* TX Buffer Descriptor control register */ #define GEM_RXBDCTRL 0x04d0 /* RX Buffer Descriptor control register */ @@ -490,6 +491,12 @@ #define GEM_SCR2CMP_OFFSET 0 #define GEM_SCR2CMP_SIZE 8 +/* Bitfields in DCFG10 */ +#define GEM_TXBD_RDBUFF_OFFSET 12 +#define GEM_TXBD_RDBUFF_SIZE 4 +#define GEM_RXBD_RDBUFF_OFFSET 8 +#define GEM_RXBD_RDBUFF_SIZE 4 + /* Bitfields in TISUBN */ #define GEM_SUBNSINCR_OFFSET 0 #define GEM_SUBNSINCR_SIZE 16 @@ -635,6 +642,7 @@ #define MACB_CAPS_USRIO_DISABLED 0x00000010 #define MACB_CAPS_JUMBO 0x00000020 #define MACB_CAPS_GEM_HAS_PTP 0x00000040 +#define MACB_CAPS_BD_RD_PREFETCH 0x00000080 #define MACB_CAPS_FIFO_MODE 0x10000000 #define MACB_CAPS_GIGABIT_MODE_AVAILABLE 0x20000000 #define MACB_CAPS_SG_DISABLED 0x40000000 @@ -1203,6 +1211,9 @@ struct macb { unsigned int max_tuples; struct tasklet_struct hresp_err_tasklet; + + int rx_bd_rd_prefetch; + int tx_bd_rd_prefetch; }; #ifdef CONFIG_MACB_USE_HWSTAMP diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 2d5d0d110151..a6c911bb5ce2 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -1811,6 +1811,7 @@ static void macb_free_consistent(struct macb *bp) { struct macb_queue *queue; unsigned int q; + int size; bp->macbgem_ops.mog_free_rx_buffers(bp); @@ -1818,12 +1819,14 @@ static void macb_free_consistent(struct macb *bp) kfree(queue->tx_skb); queue->tx_skb = NULL; if (queue->tx_ring) { - dma_free_coherent(&bp->pdev->dev, TX_RING_BYTES(bp), + size = TX_RING_BYTES(bp) + bp->tx_bd_rd_prefetch; + dma_free_coherent(&bp->pdev->dev, size, queue->tx_ring, queue->tx_ring_dma); queue->tx_ring = NULL; } if (queue->rx_ring) { - dma_free_coherent(&bp->pdev->dev, RX_RING_BYTES(bp), + size = RX_RING_BYTES(bp) + bp->rx_bd_rd_prefetch; + dma_free_coherent(&bp->pdev->dev, size, queue->rx_ring, queue->rx_ring_dma); queue->rx_ring = NULL; } @@ -1873,7 +1876,7 @@ static int macb_alloc_consistent(struct macb *bp) int size; for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue) { - size = TX_RING_BYTES(bp); + size = TX_RING_BYTES(bp) + bp->tx_bd_rd_prefetch; queue->tx_ring = dma_alloc_coherent(&bp->pdev->dev, size, &queue->tx_ring_dma, GFP_KERNEL); @@ -1889,7 +1892,7 @@ static int macb_alloc_consistent(struct macb *bp) if (!queue->tx_skb) goto out_err; - size = RX_RING_BYTES(bp); + size = RX_RING_BYTES(bp) + bp->rx_bd_rd_prefetch; queue->rx_ring = dma_alloc_coherent(&bp->pdev->dev, size, &queue->rx_ring_dma, GFP_KERNEL); if (!queue->rx_ring) @@ -3796,7 +3799,7 @@ static const struct macb_config np4_config = { static const struct macb_config zynqmp_config = { .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO | - MACB_CAPS_GEM_HAS_PTP, + MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_BD_RD_PREFETCH, .dma_burst_length = 16, .clk_init = macb_clk_init, .init = macb_init, @@ -3857,7 +3860,7 @@ static int macb_probe(struct platform_device *pdev) void __iomem *mem; const char *mac; struct macb *bp; - int err; + int err, val; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); mem = devm_ioremap_resource(&pdev->dev, regs); @@ -3946,6 +3949,18 @@ static int macb_probe(struct platform_device *pdev) else dev->max_mtu = ETH_DATA_LEN; + if (bp->caps & MACB_CAPS_BD_RD_PREFETCH) { + val = GEM_BFEXT(RXBD_RDBUFF, gem_readl(bp, DCFG10)); + if (val) + bp->rx_bd_rd_prefetch = (2 << (val - 1)) * + macb_dma_desc_get_size(bp); + + val = GEM_BFEXT(TXBD_RDBUFF, gem_readl(bp, DCFG10)); + if (val) + bp->tx_bd_rd_prefetch = (2 << (val - 1)) * + macb_dma_desc_get_size(bp); + } + mac = of_get_mac_address(np); if (mac) { ether_addr_copy(bp->dev->dev_addr, mac); -- cgit v1.2.3 From 11a245e2f7bf25fc21f47e4c9c8491841b128890 Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Fri, 6 Jul 2018 21:01:05 +0200 Subject: net/sched: act_csum: fix NULL dereference when 'goto chain' is used the control action in the common member of struct tcf_csum must be a valid value, as it can contain the chain index when 'goto chain' is used. Ensure that the control action can be read as x->tcfa_action, when x is a pointer to struct tc_action and x->ops->type is TCA_ACT_CSUM, to prevent the following command: # tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ > $tcflags dst_mac $h2mac action csum ip or tcp or udp or sctp goto chain 1 from triggering a NULL pointer dereference when a matching packet is received. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 800000010416b067 P4D 800000010416b067 PUD 1041be067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 3072 Comm: mausezahn Tainted: G E 4.18.0-rc2.auguri+ #421 Hardware name: Hewlett-Packard HP Z220 CMT Workstation/1790, BIOS K51 v01.58 02/07/2013 RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffffa020dea03c40 EFLAGS: 00010246 RAX: 0000000020000001 RBX: ffffa020d7ccef00 RCX: 0000000000000054 RDX: 0000000000000000 RSI: ffffa020ca5ae000 RDI: ffffa020d7ccef00 RBP: ffffa020dea03e60 R08: 0000000000000000 R09: ffffa020dea03c9c R10: ffffa020dea03c78 R11: 0000000000000008 R12: ffffa020d3fe4f00 R13: ffffa020d3fe4f08 R14: 0000000000000001 R15: ffffa020d53ca300 FS: 00007f5a46942740(0000) GS:ffffa020dea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000104218002 CR4: 00000000001606f0 Call Trace: fl_classify+0x1ad/0x1c0 [cls_flower] ? arp_rcv+0x121/0x1b0 ? __x2apic_send_IPI_dest+0x40/0x40 ? smp_reschedule_interrupt+0x1c/0xd0 ? reschedule_interrupt+0xf/0x20 ? reschedule_interrupt+0xa/0x20 ? device_is_rmrr_locked+0xe/0x50 ? iommu_should_identity_map+0x49/0xd0 ? __intel_map_single+0x30/0x140 ? e1000e_update_rdt_wa.isra.52+0x22/0xb0 [e1000e] ? e1000_alloc_rx_buffers+0x233/0x250 [e1000e] ? kmem_cache_alloc+0x38/0x1c0 tcf_classify+0x89/0x140 __netif_receive_skb_core+0x5ea/0xb70 ? enqueue_task_fair+0xb6/0x7d0 ? process_backlog+0x97/0x150 process_backlog+0x97/0x150 net_rx_action+0x14b/0x3e0 __do_softirq+0xde/0x2b4 do_softirq_own_stack+0x2a/0x40 do_softirq.part.18+0x49/0x50 __local_bh_enable_ip+0x49/0x50 __dev_queue_xmit+0x4ab/0x8a0 ? wait_woken+0x80/0x80 ? packet_sendmsg+0x38f/0x810 ? __dev_queue_xmit+0x8a0/0x8a0 packet_sendmsg+0x38f/0x810 sock_sendmsg+0x36/0x40 __sys_sendto+0x10e/0x140 ? do_vfs_ioctl+0xa4/0x630 ? syscall_trace_enter+0x1df/0x2e0 ? __audit_syscall_exit+0x22a/0x290 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f5a45cbec93 Code: 48 8b 0d 18 83 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 59 c7 20 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 2b f7 ff ff 48 89 04 24 RSP: 002b:00007ffd0ee6d748 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000001161010 RCX: 00007f5a45cbec93 RDX: 0000000000000062 RSI: 0000000001161322 RDI: 0000000000000003 RBP: 00007ffd0ee6d780 R08: 00007ffd0ee6d760 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000062 R13: 0000000001161322 R14: 00007ffd0ee6d760 R15: 0000000000000003 Modules linked in: act_csum act_gact cls_flower sch_ingress vrf veth act_tunnel_key(E) xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_hda_codec_hdmi snd_hda_codec_realtek kvm snd_hda_codec_generic hp_wmi iTCO_wdt sparse_keymap rfkill mei_wdt iTCO_vendor_support wmi_bmof gpio_ich irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel snd_hda_intel crypto_simd cryptd snd_hda_codec glue_helper snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm pcspkr i2c_i801 snd_timer snd sg lpc_ich soundcore wmi mei_me mei ie31200_edac nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sr_mod cdrom sd_mod ahci libahci crc32c_intel i915 ixgbe serio_raw libata video dca i2c_algo_bit sfc drm_kms_helper syscopyarea mtd sysfillrect mdio sysimgblt fb_sys_fops drm e1000e i2c_core CR2: 0000000000000000 ---[ end trace 3c9e9d1a77df4026 ]--- RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffffa020dea03c40 EFLAGS: 00010246 RAX: 0000000020000001 RBX: ffffa020d7ccef00 RCX: 0000000000000054 RDX: 0000000000000000 RSI: ffffa020ca5ae000 RDI: ffffa020d7ccef00 RBP: ffffa020dea03e60 R08: 0000000000000000 R09: ffffa020dea03c9c R10: ffffa020dea03c78 R11: 0000000000000008 R12: ffffa020d3fe4f00 R13: ffffa020d3fe4f08 R14: 0000000000000001 R15: ffffa020d53ca300 FS: 00007f5a46942740(0000) GS:ffffa020dea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000104218002 CR4: 00000000001606f0 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x26400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: 9c5f69bbd75a ("net/sched: act_csum: don't use spinlock in the fast path") Signed-off-by: Davide Caratti Signed-off-by: David S. Miller --- include/net/tc_act/tc_csum.h | 1 - net/sched/act_csum.c | 6 +++--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/include/net/tc_act/tc_csum.h b/include/net/tc_act/tc_csum.h index 9470fd7e4350..32d2454c0479 100644 --- a/include/net/tc_act/tc_csum.h +++ b/include/net/tc_act/tc_csum.h @@ -7,7 +7,6 @@ #include struct tcf_csum_params { - int action; u32 update_flags; struct rcu_head rcu; }; diff --git a/net/sched/act_csum.c b/net/sched/act_csum.c index 526a8e491626..6e7124e57918 100644 --- a/net/sched/act_csum.c +++ b/net/sched/act_csum.c @@ -91,7 +91,7 @@ static int tcf_csum_init(struct net *net, struct nlattr *nla, } params_old = rtnl_dereference(p->params); - params_new->action = parm->action; + p->tcf_action = parm->action; params_new->update_flags = parm->update_flags; rcu_assign_pointer(p->params, params_new); if (params_old) @@ -561,7 +561,7 @@ static int tcf_csum(struct sk_buff *skb, const struct tc_action *a, tcf_lastuse_update(&p->tcf_tm); bstats_cpu_update(this_cpu_ptr(p->common.cpu_bstats), skb); - action = params->action; + action = READ_ONCE(p->tcf_action); if (unlikely(action == TC_ACT_SHOT)) goto drop_stats; @@ -599,11 +599,11 @@ static int tcf_csum_dump(struct sk_buff *skb, struct tc_action *a, int bind, .index = p->tcf_index, .refcnt = p->tcf_refcnt - ref, .bindcnt = p->tcf_bindcnt - bind, + .action = p->tcf_action, }; struct tcf_t t; params = rtnl_dereference(p->params); - opt.action = params->action; opt.update_flags = params->update_flags; if (nla_put(skb, TCA_CSUM_PARMS, sizeof(opt), &opt)) -- cgit v1.2.3 From 38230a3e0e0933bbcf5df6fa469ba0667f667568 Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Fri, 6 Jul 2018 21:01:06 +0200 Subject: net/sched: act_tunnel_key: fix NULL dereference when 'goto chain' is used the control action in the common member of struct tcf_tunnel_key must be a valid value, as it can contain the chain index when 'goto chain' is used. Ensure that the control action can be read as x->tcfa_action, when x is a pointer to struct tc_action and x->ops->type is TCA_ACT_TUNNEL_KEY, to prevent the following command: # tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ > $tcflags dst_mac $h2mac action tunnel_key unset goto chain 1 from causing a NULL dereference when a matching packet is received: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 80000001097ac067 P4D 80000001097ac067 PUD 103b0a067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 3491 Comm: mausezahn Tainted: G E 4.18.0-rc2.auguri+ #421 Hardware name: Hewlett-Packard HP Z220 CMT Workstation/1790, BIOS K51 v01.58 02/07/2013 RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff95145ea03c40 EFLAGS: 00010246 RAX: 0000000020000001 RBX: ffff9514499e5800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffff95145ea03e60 R08: 0000000000000000 R09: ffff95145ea03c9c R10: ffff95145ea03c78 R11: 0000000000000008 R12: ffff951456a69800 R13: ffff951456a69808 R14: 0000000000000001 R15: ffff95144965ee40 FS: 00007fd67ee11740(0000) GS:ffff95145ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001038a2006 CR4: 00000000001606f0 Call Trace: fl_classify+0x1ad/0x1c0 [cls_flower] ? __update_load_avg_se.isra.47+0x1ca/0x1d0 ? __update_load_avg_se.isra.47+0x1ca/0x1d0 ? update_load_avg+0x665/0x690 ? update_load_avg+0x665/0x690 ? kmem_cache_alloc+0x38/0x1c0 tcf_classify+0x89/0x140 __netif_receive_skb_core+0x5ea/0xb70 ? enqueue_entity+0xd0/0x270 ? process_backlog+0x97/0x150 process_backlog+0x97/0x150 net_rx_action+0x14b/0x3e0 __do_softirq+0xde/0x2b4 do_softirq_own_stack+0x2a/0x40 do_softirq.part.18+0x49/0x50 __local_bh_enable_ip+0x49/0x50 __dev_queue_xmit+0x4ab/0x8a0 ? wait_woken+0x80/0x80 ? packet_sendmsg+0x38f/0x810 ? __dev_queue_xmit+0x8a0/0x8a0 packet_sendmsg+0x38f/0x810 sock_sendmsg+0x36/0x40 __sys_sendto+0x10e/0x140 ? do_vfs_ioctl+0xa4/0x630 ? syscall_trace_enter+0x1df/0x2e0 ? __audit_syscall_exit+0x22a/0x290 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fd67e18dc93 Code: 48 8b 0d 18 83 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 59 c7 20 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 2b f7 ff ff 48 89 04 24 RSP: 002b:00007ffe0189b748 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000020ca010 RCX: 00007fd67e18dc93 RDX: 0000000000000062 RSI: 00000000020ca322 RDI: 0000000000000003 RBP: 00007ffe0189b780 R08: 00007ffe0189b760 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000062 R13: 00000000020ca322 R14: 00007ffe0189b760 R15: 0000000000000003 Modules linked in: act_tunnel_key act_gact cls_flower sch_ingress vrf veth act_csum(E) xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter intel_rapl snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic kvm_intel kvm irqbypass snd_hda_intel crct10dif_pclmul crc32_pclmul hp_wmi ghash_clmulni_intel pcbc snd_hda_codec aesni_intel sparse_keymap rfkill snd_hda_core snd_hwdep snd_seq crypto_simd iTCO_wdt gpio_ich iTCO_vendor_support wmi_bmof cryptd mei_wdt glue_helper snd_seq_device snd_pcm pcspkr snd_timer snd i2c_i801 lpc_ich sg soundcore wmi mei_me mei ie31200_edac nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod sr_mod cdrom i915 video i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ahci crc32c_intel libahci serio_raw sfc libata mtd drm ixgbe mdio i2c_core e1000e dca CR2: 0000000000000000 ---[ end trace 1ab8b5b5d4639dfc ]--- RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff95145ea03c40 EFLAGS: 00010246 RAX: 0000000020000001 RBX: ffff9514499e5800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffff95145ea03e60 R08: 0000000000000000 R09: ffff95145ea03c9c R10: ffff95145ea03c78 R11: 0000000000000008 R12: ffff951456a69800 R13: ffff951456a69808 R14: 0000000000000001 R15: ffff95144965ee40 FS: 00007fd67ee11740(0000) GS:ffff95145ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001038a2006 CR4: 00000000001606f0 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x11400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: d0f6dd8a914f ("net/sched: Introduce act_tunnel_key") Signed-off-by: Davide Caratti Signed-off-by: David S. Miller --- include/net/tc_act/tc_tunnel_key.h | 1 - net/sched/act_tunnel_key.c | 6 +++--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/include/net/tc_act/tc_tunnel_key.h b/include/net/tc_act/tc_tunnel_key.h index efef0b4b1b2b..46b8c7f1c8d5 100644 --- a/include/net/tc_act/tc_tunnel_key.h +++ b/include/net/tc_act/tc_tunnel_key.h @@ -18,7 +18,6 @@ struct tcf_tunnel_key_params { struct rcu_head rcu; int tcft_action; - int action; struct metadata_dst *tcft_enc_metadata; }; diff --git a/net/sched/act_tunnel_key.c b/net/sched/act_tunnel_key.c index 626dac81a48a..9bc6c2ae98a5 100644 --- a/net/sched/act_tunnel_key.c +++ b/net/sched/act_tunnel_key.c @@ -36,7 +36,7 @@ static int tunnel_key_act(struct sk_buff *skb, const struct tc_action *a, tcf_lastuse_update(&t->tcf_tm); bstats_cpu_update(this_cpu_ptr(t->common.cpu_bstats), skb); - action = params->action; + action = READ_ONCE(t->tcf_action); switch (params->tcft_action) { case TCA_TUNNEL_KEY_ACT_RELEASE: @@ -182,7 +182,7 @@ static int tunnel_key_init(struct net *net, struct nlattr *nla, params_old = rtnl_dereference(t->params); - params_new->action = parm->action; + t->tcf_action = parm->action; params_new->tcft_action = parm->t_action; params_new->tcft_enc_metadata = metadata; @@ -254,13 +254,13 @@ static int tunnel_key_dump(struct sk_buff *skb, struct tc_action *a, .index = t->tcf_index, .refcnt = t->tcf_refcnt - ref, .bindcnt = t->tcf_bindcnt - bind, + .action = t->tcf_action, }; struct tcf_t tm; params = rtnl_dereference(t->params); opt.t_action = params->tcft_action; - opt.action = params->action; if (nla_put(skb, TCA_TUNNEL_KEY_PARMS, sizeof(opt), &opt)) goto nla_put_failure; -- cgit v1.2.3 From 122c5770cff2c1df1a2384b68285be2812cd72c1 Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Wed, 27 Jun 2018 20:56:18 -0500 Subject: fpga: altera-cvp: Fix an error handling path in 'altera_cvp_probe()' If 'fpga_mgr_create()' fails, we should release some resources, as done in the other error handling path of the function. Fixes: 7085e2a94f7d ("fpga: manager: change api, don't use drvdata") Signed-off-by: Christophe JAILLET Reviewed-by: Moritz Fischer Acked-by: Alan Tull Signed-off-by: Greg Kroah-Hartman --- drivers/fpga/altera-cvp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c index dd4edd8f22ce..7fa793672a7a 100644 --- a/drivers/fpga/altera-cvp.c +++ b/drivers/fpga/altera-cvp.c @@ -455,8 +455,10 @@ static int altera_cvp_probe(struct pci_dev *pdev, mgr = fpga_mgr_create(&pdev->dev, conf->mgr_name, &altera_cvp_ops, conf); - if (!mgr) - return -ENOMEM; + if (!mgr) { + ret = -ENOMEM; + goto err_unmap; + } pci_set_drvdata(pdev, mgr); -- cgit v1.2.3 From 9421e45f5ff3d558cf8b75a8cc0824530caf3453 Mon Sep 17 00:00:00 2001 From: Xiubo Li Date: Fri, 6 Jul 2018 22:05:37 -0400 Subject: uio: use request_threaded_irq instead Prepraing for changing to use mutex lock. Signed-off-by: Xiubo Li Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index e8f4ac9400ea..b4b2ae1e0473 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -902,8 +902,9 @@ int __uio_register_device(struct module *owner, * FDs at the time of unregister and therefore may not be * freed until they are released. */ - ret = request_irq(info->irq, uio_interrupt, - info->irq_flags, info->name, idev); + ret = request_threaded_irq(info->irq, NULL, uio_interrupt, + info->irq_flags, info->name, idev); + if (ret) goto err_request_irq; } -- cgit v1.2.3 From 543af5861f41af0a5d2432f6fb5976af50f9cee5 Mon Sep 17 00:00:00 2001 From: Xiubo Li Date: Fri, 6 Jul 2018 22:05:38 -0400 Subject: uio: change to use the mutex lock instead of the spin lock We are hitting a regression with the following commit: commit a93e7b331568227500186a465fee3c2cb5dffd1f Author: Hamish Martin Date: Mon May 14 13:32:23 2018 +1200 uio: Prevent device destruction while fds are open The problem is the addition of spin_lock_irqsave in uio_write. This leads to hitting uio_write -> copy_from_user -> _copy_from_user -> might_fault and the logs filling up with sleeping warnings. I also noticed some uio drivers allocate memory, sleep, grab mutexes from callouts like open() and release and uio is now doing spin_lock_irqsave while calling them. Reported-by: Mike Christie CC: Hamish Martin Reviewed-by: Hamish Martin Signed-off-by: Xiubo Li Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio.c | 32 +++++++++++++------------------- include/linux/uio_driver.h | 2 +- 2 files changed, 14 insertions(+), 20 deletions(-) diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index b4b2ae1e0473..655ade4fb3b1 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -433,7 +433,6 @@ static int uio_open(struct inode *inode, struct file *filep) struct uio_device *idev; struct uio_listener *listener; int ret = 0; - unsigned long flags; mutex_lock(&minor_lock); idev = idr_find(&uio_idr, iminor(inode)); @@ -460,10 +459,10 @@ static int uio_open(struct inode *inode, struct file *filep) listener->event_count = atomic_read(&idev->event); filep->private_data = listener; - spin_lock_irqsave(&idev->info_lock, flags); + mutex_lock(&idev->info_lock); if (idev->info && idev->info->open) ret = idev->info->open(idev->info, inode); - spin_unlock_irqrestore(&idev->info_lock, flags); + mutex_unlock(&idev->info_lock); if (ret) goto err_infoopen; @@ -495,12 +494,11 @@ static int uio_release(struct inode *inode, struct file *filep) int ret = 0; struct uio_listener *listener = filep->private_data; struct uio_device *idev = listener->dev; - unsigned long flags; - spin_lock_irqsave(&idev->info_lock, flags); + mutex_lock(&idev->info_lock); if (idev->info && idev->info->release) ret = idev->info->release(idev->info, inode); - spin_unlock_irqrestore(&idev->info_lock, flags); + mutex_unlock(&idev->info_lock); module_put(idev->owner); kfree(listener); @@ -513,12 +511,11 @@ static __poll_t uio_poll(struct file *filep, poll_table *wait) struct uio_listener *listener = filep->private_data; struct uio_device *idev = listener->dev; __poll_t ret = 0; - unsigned long flags; - spin_lock_irqsave(&idev->info_lock, flags); + mutex_lock(&idev->info_lock); if (!idev->info || !idev->info->irq) ret = -EIO; - spin_unlock_irqrestore(&idev->info_lock, flags); + mutex_unlock(&idev->info_lock); if (ret) return ret; @@ -537,12 +534,11 @@ static ssize_t uio_read(struct file *filep, char __user *buf, DECLARE_WAITQUEUE(wait, current); ssize_t retval = 0; s32 event_count; - unsigned long flags; - spin_lock_irqsave(&idev->info_lock, flags); + mutex_lock(&idev->info_lock); if (!idev->info || !idev->info->irq) retval = -EIO; - spin_unlock_irqrestore(&idev->info_lock, flags); + mutex_unlock(&idev->info_lock); if (retval) return retval; @@ -592,9 +588,8 @@ static ssize_t uio_write(struct file *filep, const char __user *buf, struct uio_device *idev = listener->dev; ssize_t retval; s32 irq_on; - unsigned long flags; - spin_lock_irqsave(&idev->info_lock, flags); + mutex_lock(&idev->info_lock); if (!idev->info || !idev->info->irq) { retval = -EIO; goto out; @@ -618,7 +613,7 @@ static ssize_t uio_write(struct file *filep, const char __user *buf, retval = idev->info->irqcontrol(idev->info, irq_on); out: - spin_unlock_irqrestore(&idev->info_lock, flags); + mutex_unlock(&idev->info_lock); return retval ? retval : sizeof(s32); } @@ -865,7 +860,7 @@ int __uio_register_device(struct module *owner, idev->owner = owner; idev->info = info; - spin_lock_init(&idev->info_lock); + mutex_init(&idev->info_lock); init_waitqueue_head(&idev->wait); atomic_set(&idev->event, 0); @@ -929,7 +924,6 @@ EXPORT_SYMBOL_GPL(__uio_register_device); void uio_unregister_device(struct uio_info *info) { struct uio_device *idev; - unsigned long flags; if (!info || !info->uio_dev) return; @@ -943,9 +937,9 @@ void uio_unregister_device(struct uio_info *info) if (info->irq && info->irq != UIO_IRQ_CUSTOM) free_irq(info->irq, idev); - spin_lock_irqsave(&idev->info_lock, flags); + mutex_lock(&idev->info_lock); idev->info = NULL; - spin_unlock_irqrestore(&idev->info_lock, flags); + mutex_unlock(&idev->info_lock); device_unregister(&idev->dev); diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h index 6c5f2074e14f..6f8b68cd460f 100644 --- a/include/linux/uio_driver.h +++ b/include/linux/uio_driver.h @@ -75,7 +75,7 @@ struct uio_device { struct fasync_struct *async_queue; wait_queue_head_t wait; struct uio_info *info; - spinlock_t info_lock; + struct mutex info_lock; struct kobject *map_dir; struct kobject *portio_dir; }; -- cgit v1.2.3 From 57c5f4df0a5a0ee83df799991251e2ee93a5e4e9 Mon Sep 17 00:00:00 2001 From: Xiubo Li Date: Fri, 6 Jul 2018 22:05:39 -0400 Subject: uio: fix crash after the device is unregistered For the target_core_user use case, after the device is unregistered it maybe still opened in user space, then the kernel will crash, like: [ 251.163692] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 251.163820] IP: [] show_name+0x23/0x40 [uio] [ 251.163965] PGD 8000000062694067 PUD 62696067 PMD 0 [ 251.164097] Oops: 0000 [#1] SMP ... [ 251.165605] e1000 mptscsih mptbase drm_panel_orientation_quirks dm_mirror dm_region_hash dm_log dm_mod [ 251.166014] CPU: 0 PID: 13380 Comm: tcmu-runner Kdump: loaded Not tainted 3.10.0-916.el7.test.x86_64 #1 [ 251.166381] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [ 251.166747] task: ffff971eb91db0c0 ti: ffff971e9e384000 task.ti: ffff971e9e384000 [ 251.167137] RIP: 0010:[] [] show_name+0x23/0x40 [uio] [ 251.167563] RSP: 0018:ffff971e9e387dc8 EFLAGS: 00010282 [ 251.167978] RAX: 0000000000000000 RBX: ffff971e9e3f8000 RCX: ffff971eb8368d98 [ 251.168408] RDX: ffff971e9e3f8000 RSI: ffffffffc0738084 RDI: ffff971e9e3f8000 [ 251.168856] RBP: ffff971e9e387dd0 R08: ffff971eb8bc0018 R09: 0000000000000000 [ 251.169296] R10: 0000000000001000 R11: ffffffffa09d444d R12: ffffffffa1076e80 [ 251.169750] R13: ffff971e9e387f18 R14: 0000000000000001 R15: ffff971e9cfb1c80 [ 251.170213] FS: 00007ff37d175880(0000) GS:ffff971ebb600000(0000) knlGS:0000000000000000 [ 251.170693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 251.171248] CR2: 0000000000000008 CR3: 00000000001f6000 CR4: 00000000003607f0 [ 251.172071] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 251.172640] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 251.173236] Call Trace: [ 251.173789] [] dev_attr_show+0x23/0x60 [ 251.174356] [] ? mutex_lock+0x12/0x2f [ 251.174892] [] sysfs_kf_seq_show+0xcf/0x1f0 [ 251.175433] [] kernfs_seq_show+0x26/0x30 [ 251.175981] [] seq_read+0x110/0x3f0 [ 251.176609] [] kernfs_fop_read+0xf5/0x160 [ 251.177158] [] vfs_read+0x9f/0x170 [ 251.177707] [] SyS_read+0x7f/0xf0 [ 251.178268] [] system_call_fastpath+0x1c/0x21 [ 251.178823] Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 53 48 89 d3 e8 7e 96 56 e0 48 8b 80 d8 02 00 00 48 89 df 48 c7 c6 84 80 73 c0 <48> 8b 50 08 31 c0 e8 e2 67 44 e0 5b 48 98 5d c3 0f 1f 00 66 2e [ 251.180115] RIP [] show_name+0x23/0x40 [uio] [ 251.180820] RSP [ 251.181473] CR2: 0000000000000008 CC: Hamish Martin CC: Mike Christie Reviewed-by: Hamish Martin Signed-off-by: Xiubo Li Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio.c | 104 +++++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 88 insertions(+), 16 deletions(-) diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index 655ade4fb3b1..5d421d7e8904 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -215,7 +215,20 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr, char *buf) { struct uio_device *idev = dev_get_drvdata(dev); - return sprintf(buf, "%s\n", idev->info->name); + int ret; + + mutex_lock(&idev->info_lock); + if (!idev->info) { + ret = -EINVAL; + dev_err(dev, "the device has been unregistered\n"); + goto out; + } + + ret = sprintf(buf, "%s\n", idev->info->name); + +out: + mutex_unlock(&idev->info_lock); + return ret; } static DEVICE_ATTR_RO(name); @@ -223,7 +236,20 @@ static ssize_t version_show(struct device *dev, struct device_attribute *attr, char *buf) { struct uio_device *idev = dev_get_drvdata(dev); - return sprintf(buf, "%s\n", idev->info->version); + int ret; + + mutex_lock(&idev->info_lock); + if (!idev->info) { + ret = -EINVAL; + dev_err(dev, "the device has been unregistered\n"); + goto out; + } + + ret = sprintf(buf, "%s\n", idev->info->version); + +out: + mutex_unlock(&idev->info_lock); + return ret; } static DEVICE_ATTR_RO(version); @@ -415,11 +441,15 @@ EXPORT_SYMBOL_GPL(uio_event_notify); static irqreturn_t uio_interrupt(int irq, void *dev_id) { struct uio_device *idev = (struct uio_device *)dev_id; - irqreturn_t ret = idev->info->handler(irq, idev->info); + irqreturn_t ret; + + mutex_lock(&idev->info_lock); + ret = idev->info->handler(irq, idev->info); if (ret == IRQ_HANDLED) uio_event_notify(idev->info); + mutex_unlock(&idev->info_lock); return ret; } @@ -460,6 +490,12 @@ static int uio_open(struct inode *inode, struct file *filep) filep->private_data = listener; mutex_lock(&idev->info_lock); + if (!idev->info) { + mutex_unlock(&idev->info_lock); + ret = -EINVAL; + goto err_alloc_listener; + } + if (idev->info && idev->info->open) ret = idev->info->open(idev->info, inode); mutex_unlock(&idev->info_lock); @@ -590,6 +626,11 @@ static ssize_t uio_write(struct file *filep, const char __user *buf, s32 irq_on; mutex_lock(&idev->info_lock); + if (!idev->info) { + retval = -EINVAL; + goto out; + } + if (!idev->info || !idev->info->irq) { retval = -EIO; goto out; @@ -635,10 +676,20 @@ static vm_fault_t uio_vma_fault(struct vm_fault *vmf) struct page *page; unsigned long offset; void *addr; + int ret = 0; + int mi; - int mi = uio_find_mem_index(vmf->vma); - if (mi < 0) - return VM_FAULT_SIGBUS; + mutex_lock(&idev->info_lock); + if (!idev->info) { + ret = VM_FAULT_SIGBUS; + goto out; + } + + mi = uio_find_mem_index(vmf->vma); + if (mi < 0) { + ret = VM_FAULT_SIGBUS; + goto out; + } /* * We need to subtract mi because userspace uses offset = N*PAGE_SIZE @@ -653,7 +704,11 @@ static vm_fault_t uio_vma_fault(struct vm_fault *vmf) page = vmalloc_to_page(addr); get_page(page); vmf->page = page; - return 0; + +out: + mutex_unlock(&idev->info_lock); + + return ret; } static const struct vm_operations_struct uio_logical_vm_ops = { @@ -678,6 +733,7 @@ static int uio_mmap_physical(struct vm_area_struct *vma) struct uio_device *idev = vma->vm_private_data; int mi = uio_find_mem_index(vma); struct uio_mem *mem; + if (mi < 0) return -EINVAL; mem = idev->info->mem + mi; @@ -719,30 +775,46 @@ static int uio_mmap(struct file *filep, struct vm_area_struct *vma) vma->vm_private_data = idev; + mutex_lock(&idev->info_lock); + if (!idev->info) { + ret = -EINVAL; + goto out; + } + mi = uio_find_mem_index(vma); - if (mi < 0) - return -EINVAL; + if (mi < 0) { + ret = -EINVAL; + goto out; + } requested_pages = vma_pages(vma); actual_pages = ((idev->info->mem[mi].addr & ~PAGE_MASK) + idev->info->mem[mi].size + PAGE_SIZE -1) >> PAGE_SHIFT; - if (requested_pages > actual_pages) - return -EINVAL; + if (requested_pages > actual_pages) { + ret = -EINVAL; + goto out; + } if (idev->info->mmap) { ret = idev->info->mmap(idev->info, vma); - return ret; + goto out; } switch (idev->info->mem[mi].memtype) { case UIO_MEM_PHYS: - return uio_mmap_physical(vma); + ret = uio_mmap_physical(vma); + break; case UIO_MEM_LOGICAL: case UIO_MEM_VIRTUAL: - return uio_mmap_logical(vma); + ret = uio_mmap_logical(vma); + break; default: - return -EINVAL; + ret = -EINVAL; } + +out: + mutex_unlock(&idev->info_lock); + return 0; } static const struct file_operations uio_fops = { @@ -932,12 +1004,12 @@ void uio_unregister_device(struct uio_info *info) uio_free_minor(idev); + mutex_lock(&idev->info_lock); uio_dev_del_attributes(idev); if (info->irq && info->irq != UIO_IRQ_CUSTOM) free_irq(info->irq, idev); - mutex_lock(&idev->info_lock); idev->info = NULL; mutex_unlock(&idev->info_lock); -- cgit v1.2.3 From 007a74907deeceefef9dc3ec4679fbd7921eaa51 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 26 Jun 2018 14:46:35 +0300 Subject: thunderbolt: Notify userspace when boot_acl is changed The commit 9aaa3b8b4c56 ("thunderbolt: Add support for preboot ACL") introduced boot_acl attribute but missed the fact that now userspace needs to poll the attribute constantly to find out whether it has changed or not. Fix this by sending notification to the userspace whenever the boot_acl attribute is changed. Fixes: 9aaa3b8b4c56 ("thunderbolt: Add support for preboot ACL") Reported-and-tested-by: Christian Kellner Signed-off-by: Mika Westerberg Reviewed-by: Christian Kellner Acked-by: Yehezkel Bernat Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/thunderbolt/domain.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/thunderbolt/domain.c b/drivers/thunderbolt/domain.c index 6281266b8ec0..a923ebdeb73c 100644 --- a/drivers/thunderbolt/domain.c +++ b/drivers/thunderbolt/domain.c @@ -213,6 +213,10 @@ static ssize_t boot_acl_store(struct device *dev, struct device_attribute *attr, goto err_free_acl; } ret = tb->cm_ops->set_boot_acl(tb, acl, tb->nboot_acl); + if (!ret) { + /* Notify userspace about the change */ + kobject_uevent(&tb->dev.kobj, KOBJ_CHANGE); + } mutex_unlock(&tb->lock); err_free_acl: -- cgit v1.2.3 From 87ed1405ef09d29a14df43295f7b6a93b63bfe6e Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Mon, 18 Jun 2018 18:30:43 +0100 Subject: nvmem: Don't let a NULL cell_id for nvmem_cell_get() crash us In commit ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips") you can see a call like: devm_nvmem_cell_get(dev, NULL); Note that the cell ID passed to the function is NULL. This is because the qcom-qusb2 driver is expected to work only on systems where the PHY node is hooked up via device-tree and is nameless. This works OK for the most part. The first thing nvmem_cell_get() does is to call of_nvmem_cell_get() and there it's documented that a NULL name is fine. The problem happens when the call to of_nvmem_cell_get() returns -EINVAL. In such a case we'll fall back to nvmem_cell_get_from_list() and eventually might (if nvmem_cells isn't an empty list) crash with something that looks like: strcmp nvmem_find_cell __nvmem_device_get nvmem_cell_get_from_list nvmem_cell_get devm_nvmem_cell_get qusb2_phy_probe There are several different ways we could fix this problem: One could argue that perhaps the qcom-qusb2 driver should be changed to use of_nvmem_cell_get() which is allowed to have a NULL name. In that case, we'd need to add a patche to introduce devm_of_nvmem_cell_get() since the qcom-qusb2 driver is using devm managed resources. One could also argue that perhaps we could just add a name to qcom-qusb2. That would be OK but I believe it effectively changes the device tree bindings, so maybe it's a no-go. In this patch I have chosen to fix the problem by simply not crashing when a NULL cell_id is passed to nvmem_cell_get(). NOTE: that for the qcom-qusb2 driver the "nvmem-cells" property is defined to be optional and thus it's expected to be a common case that we would hit this crash and this is more than just a theoretical fix. Fixes: ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips") Signed-off-by: Douglas Anderson Signed-off-by: Srinivas Kandagatla Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index b5b0cdc21d01..514d1dfc5630 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -936,6 +936,10 @@ struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *cell_id) return cell; } + /* NULL cell_id only allowed for device tree; invalid otherwise */ + if (!cell_id) + return ERR_PTR(-EINVAL); + return nvmem_cell_get_from_list(cell_id); } EXPORT_SYMBOL_GPL(nvmem_cell_get); -- cgit v1.2.3 From 15279df6f26cf2013d713904b4a0c957ae8abb96 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Fri, 6 Jul 2018 23:50:03 +0200 Subject: x86/mtrr: Don't copy out-of-bounds data in mtrr_write Don't access the provided buffer out of bounds - this can cause a kernel out-of-bounds read when invoked through sys_splice() or other things that use kernel_write()/__kernel_write(). Fixes: 7f8ec5a4f01a ("x86/mtrr: Convert to use strncpy_from_user() helper") Signed-off-by: Jann Horn Signed-off-by: Thomas Gleixner Cc: Andy Shevchenko Cc: "H. Peter Anvin" Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180706215003.156702-1-jannh@google.com --- arch/x86/kernel/cpu/mtrr/if.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c index 4021d3859499..40eee6cc4124 100644 --- a/arch/x86/kernel/cpu/mtrr/if.c +++ b/arch/x86/kernel/cpu/mtrr/if.c @@ -106,7 +106,8 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos) memset(line, 0, LINE_SIZE); - length = strncpy_from_user(line, buf, LINE_SIZE - 1); + len = min_t(size_t, len, LINE_SIZE - 1); + length = strncpy_from_user(line, buf, len); if (length < 0) return length; -- cgit v1.2.3 From 547b3aa451ae2739585547db9fbdee11a43ff999 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Thu, 5 Jul 2018 08:05:56 -0700 Subject: bpf: sockmap, error path can not release psock in multi-map case The current code, in the error path of sock_hash_ctx_update_elem, checks if the sock has a psock in the user data and if so decrements the reference count of the psock. However, if the error happens early in the error path we may have never incremented the psock reference count and if the psock exists because the sock is in another map then we may inadvertently decrement the reference count. Fix this by making the error path only call smap_release_sock if the error happens after the increment. Reported-by: syzbot+d464d2c20c717ef5a6a8@syzkaller.appspotmail.com Fixes: 81110384441a ("bpf: sockmap, add hash map support") Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov --- kernel/bpf/sockmap.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index cf7b6a6dbd1f..3847a7ce7dae 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -1896,7 +1896,7 @@ static int __sock_map_ctx_update_elem(struct bpf_map *map, e = kzalloc(sizeof(*e), GFP_ATOMIC | __GFP_NOWARN); if (!e) { err = -ENOMEM; - goto out_progs; + goto out_free; } } @@ -2342,7 +2342,10 @@ static int sock_hash_ctx_update_elem(struct bpf_sock_ops_kern *skops, if (err) goto err; - /* bpf_map_update_elem() can be called in_irq() */ + /* psock is valid here because otherwise above *ctx_update_elem would + * have thrown an error. It is safe to skip error check. + */ + psock = smap_psock_sk(sock); raw_spin_lock_bh(&b->lock); l_old = lookup_elem_raw(head, hash, key, key_size); if (l_old && map_flags == BPF_NOEXIST) { @@ -2360,12 +2363,6 @@ static int sock_hash_ctx_update_elem(struct bpf_sock_ops_kern *skops, goto bucket_err; } - psock = smap_psock_sk(sock); - if (unlikely(!psock)) { - err = -EINVAL; - goto bucket_err; - } - rcu_assign_pointer(e->hash_link, l_new); rcu_assign_pointer(e->htab, container_of(map, struct bpf_htab, map)); @@ -2388,12 +2385,10 @@ static int sock_hash_ctx_update_elem(struct bpf_sock_ops_kern *skops, raw_spin_unlock_bh(&b->lock); return 0; bucket_err: + smap_release_sock(psock, sock); raw_spin_unlock_bh(&b->lock); err: kfree(e); - psock = smap_psock_sk(sock); - if (psock) - smap_release_sock(psock, sock); return err; } -- cgit v1.2.3 From 1d1ef005dbc6de673c62cbd2562290ada3090463 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Thu, 5 Jul 2018 08:06:01 -0700 Subject: bpf: sockmap, hash table is RCU so readers do not need locks This removes locking from readers of RCU hash table. Its not necessary. Fixes: 81110384441a ("bpf: sockmap, add hash map support") Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov --- kernel/bpf/sockmap.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index 3847a7ce7dae..00fb2e328d1b 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -2467,10 +2467,8 @@ struct sock *__sock_hash_lookup_elem(struct bpf_map *map, void *key) b = __select_bucket(htab, hash); head = &b->head; - raw_spin_lock_bh(&b->lock); l = lookup_elem_raw(head, hash, key, key_size); sk = l ? l->sk : NULL; - raw_spin_unlock_bh(&b->lock); return sk; } -- cgit v1.2.3 From 0c6bc6e531a6db36f49622f1f115770160f7afb0 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Thu, 5 Jul 2018 08:49:59 -0700 Subject: bpf: fix sk_skb programs without skb->dev assigned Multiple BPF helpers in use by sk_skb programs calculate the max skb length using the __bpf_skb_max_len function. However, this calculates the max length using the skb->dev pointer which can be NULL when an sk_skb program is paired with an sk_msg program. To force this a sk_msg program needs to redirect into the ingress path of a sock with an attach sk_skb program. Then the the sk_skb program would need to call one of the helpers that adjust the skb size. To fix the null ptr dereference use SKB_MAX_ALLOC size if no dev is available. Fixes: 8934ce2fd081 ("bpf: sockmap redirect ingress support") Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov --- net/core/filter.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/filter.c b/net/core/filter.c index 0ca6907d7efe..3095f1ba7015 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -2779,7 +2779,8 @@ static int bpf_skb_net_shrink(struct sk_buff *skb, u32 len_diff) static u32 __bpf_skb_max_len(const struct sk_buff *skb) { - return skb->dev->mtu + skb->dev->hard_header_len; + return skb->dev ? skb->dev->mtu + skb->dev->hard_header_len : + SKB_MAX_ALLOC; } static int bpf_skb_adjust_net(struct sk_buff *skb, s32 len_diff) -- cgit v1.2.3 From 99ba2b5aba24e022683a7db63204f9e306fe7ab9 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Thu, 5 Jul 2018 08:50:04 -0700 Subject: bpf: sockhash, disallow bpf_tcp_close and update in parallel After latest lock updates there is no longer anything preventing a close and recvmsg call running in parallel. Additionally, we can race update with close if we close a socket and simultaneously update if via the BPF userspace API (note the cgroup ops are already run with sock_lock held). To resolve this take sock_lock in close and update paths. Reported-by: syzbot+b680e42077a0d7c9a0c4@syzkaller.appspotmail.com Fixes: e9db4ef6bf4c ("bpf: sockhash fix omitted bucket lock in sock_close") Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov --- kernel/bpf/sockmap.c | 15 +++++++++++++++ kernel/bpf/syscall.c | 4 +++- 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index 00fb2e328d1b..9c67e96fe336 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -312,10 +312,12 @@ static void bpf_tcp_close(struct sock *sk, long timeout) struct smap_psock *psock; struct sock *osk; + lock_sock(sk); rcu_read_lock(); psock = smap_psock_sk(sk); if (unlikely(!psock)) { rcu_read_unlock(); + release_sock(sk); return sk->sk_prot->close(sk, timeout); } @@ -371,6 +373,7 @@ static void bpf_tcp_close(struct sock *sk, long timeout) e = psock_map_pop(sk, psock); } rcu_read_unlock(); + release_sock(sk); close_fun(sk, timeout); } @@ -2069,7 +2072,13 @@ static int sock_map_update_elem(struct bpf_map *map, return -EOPNOTSUPP; } + lock_sock(skops.sk); + preempt_disable(); + rcu_read_lock(); err = sock_map_ctx_update_elem(&skops, map, key, flags); + rcu_read_unlock(); + preempt_enable(); + release_sock(skops.sk); fput(socket->file); return err; } @@ -2410,7 +2419,13 @@ static int sock_hash_update_elem(struct bpf_map *map, return -EINVAL; } + lock_sock(skops.sk); + preempt_disable(); + rcu_read_lock(); err = sock_hash_ctx_update_elem(&skops, map, key, flags); + rcu_read_unlock(); + preempt_enable(); + release_sock(skops.sk); fput(socket->file); return err; } diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index d10ecd78105f..a31a1ba0f8ea 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -735,7 +735,9 @@ static int map_update_elem(union bpf_attr *attr) if (bpf_map_is_dev_bound(map)) { err = bpf_map_offload_update_elem(map, key, value, attr->flags); goto out; - } else if (map->map_type == BPF_MAP_TYPE_CPUMAP) { + } else if (map->map_type == BPF_MAP_TYPE_CPUMAP || + map->map_type == BPF_MAP_TYPE_SOCKHASH || + map->map_type == BPF_MAP_TYPE_SOCKMAP) { err = map->ops->map_update_elem(map, key, value, attr->flags); goto out; } -- cgit v1.2.3 From 7ebc14d507b4b55105da8d1a1eda323381529cc7 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Thu, 5 Jul 2018 08:50:10 -0700 Subject: bpf: sockmap, consume_skb in close path Currently, when a sock is closed and the bpf_tcp_close() callback is used we remove memory but do not free the skb. Call consume_skb() if the skb is attached to the buffer. Reported-by: syzbot+d464d2c20c717ef5a6a8@syzkaller.appspotmail.com Fixes: 1aa12bdf1bfb ("bpf: sockmap, add sock close() hook to remove socks") Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov --- kernel/bpf/sockmap.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index 9c67e96fe336..dfc8a8a07c1f 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -571,7 +571,8 @@ static int free_sg(struct sock *sk, int start, struct sk_msg_buff *md) while (sg[i].length) { free += sg[i].length; sk_mem_uncharge(sk, sg[i].length); - put_page(sg_page(&sg[i])); + if (!md->skb) + put_page(sg_page(&sg[i])); sg[i].length = 0; sg[i].page_link = 0; sg[i].offset = 0; @@ -580,6 +581,8 @@ static int free_sg(struct sock *sk, int start, struct sk_msg_buff *md) if (i == MAX_SKB_FRAGS) i = 0; } + if (md->skb) + consume_skb(md->skb); return free; } -- cgit v1.2.3 From 0ea488ff8d23c93da383fcf424825c298b13b1fb Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Thu, 5 Jul 2018 08:50:15 -0700 Subject: bpf: sockmap, convert bpf_compute_data_pointers to bpf_*_sk_skb In commit 'bpf: bpf_compute_data uses incorrect cb structure' (8108a7751512) we added the routine bpf_compute_data_end_sk_skb() to compute the correct data_end values, but this has since been lost. In kernel v4.14 this was correct and the above patch was applied in it entirety. Then when v4.14 was merged into v4.15-rc1 net-next tree we lost the piece that renamed bpf_compute_data_pointers to the new function bpf_compute_data_end_sk_skb. This was done here, e1ea2f9856b7 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") When it conflicted with the following rename patch, 6aaae2b6c433 ("bpf: rename bpf_compute_data_end into bpf_compute_data_pointers") Finally, after a refactor I thought even the function bpf_compute_data_end_sk_skb() was no longer needed and it was erroneously removed. However, we never reverted the sk_skb_convert_ctx_access() usage of tcp_skb_cb which had been committed and survived the merge conflict. Here we fix this by adding back the helper and *_data_end_sk_skb() usage. Using the bpf_skc_data_end mapping is not correct because it expects a qdisc_skb_cb object but at the sock layer this is not the case. Even though it happens to work here because we don't overwrite any data in-use at the socket layer and the cb structure is cleared later this has potential to create some subtle issues. But, even more concretely the filter.c access check uses tcp_skb_cb. And by some act of chance though, struct bpf_skb_data_end { struct qdisc_skb_cb qdisc_cb; /* 0 28 */ /* XXX 4 bytes hole, try to pack */ void * data_meta; /* 32 8 */ void * data_end; /* 40 8 */ /* size: 48, cachelines: 1, members: 3 */ /* sum members: 44, holes: 1, sum holes: 4 */ /* last cacheline: 48 bytes */ }; and then tcp_skb_cb, struct tcp_skb_cb { [...] struct { __u32 flags; /* 24 4 */ struct sock * sk_redir; /* 32 8 */ void * data_end; /* 40 8 */ } bpf; /* 24 */ }; So when we use offset_of() to track down the byte offset we get 40 in either case and everything continues to work. Fix this mess and use correct structures its unclear how long this might actually work for until someone moves the structs around. Reported-by: Martin KaFai Lau Fixes: e1ea2f9856b7 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") Fixes: 6aaae2b6c433 ("bpf: rename bpf_compute_data_end into bpf_compute_data_pointers") Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov --- include/net/tcp.h | 4 +++ kernel/bpf/sockmap.c | 4 +-- net/core/filter.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++++---- 3 files changed, 97 insertions(+), 9 deletions(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index 800582b5dd54..af3ec72d5d41 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -828,6 +828,10 @@ struct tcp_skb_cb { #define TCP_SKB_CB(__skb) ((struct tcp_skb_cb *)&((__skb)->cb[0])) +static inline void bpf_compute_data_end_sk_skb(struct sk_buff *skb) +{ + TCP_SKB_CB(skb)->bpf.data_end = skb->data + skb_headlen(skb); +} #if IS_ENABLED(CONFIG_IPV6) /* This is the variant of inet6_iif() that must be used by TCP, diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index dfc8a8a07c1f..98fb7938beea 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -1236,7 +1236,7 @@ static int smap_verdict_func(struct smap_psock *psock, struct sk_buff *skb) */ TCP_SKB_CB(skb)->bpf.sk_redir = NULL; skb->sk = psock->sock; - bpf_compute_data_pointers(skb); + bpf_compute_data_end_sk_skb(skb); preempt_disable(); rc = (*prog->bpf_func)(skb, prog->insnsi); preempt_enable(); @@ -1491,7 +1491,7 @@ static int smap_parse_func_strparser(struct strparser *strp, * any socket yet. */ skb->sk = psock->sock; - bpf_compute_data_pointers(skb); + bpf_compute_data_end_sk_skb(skb); rc = (*prog->bpf_func)(skb, prog->insnsi); skb->sk = NULL; rcu_read_unlock(); diff --git a/net/core/filter.c b/net/core/filter.c index 3095f1ba7015..470268024a40 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -1762,6 +1762,37 @@ static const struct bpf_func_proto bpf_skb_pull_data_proto = { .arg2_type = ARG_ANYTHING, }; +static inline int sk_skb_try_make_writable(struct sk_buff *skb, + unsigned int write_len) +{ + int err = __bpf_try_make_writable(skb, write_len); + + bpf_compute_data_end_sk_skb(skb); + return err; +} + +BPF_CALL_2(sk_skb_pull_data, struct sk_buff *, skb, u32, len) +{ + /* Idea is the following: should the needed direct read/write + * test fail during runtime, we can pull in more data and redo + * again, since implicitly, we invalidate previous checks here. + * + * Or, since we know how much we need to make read/writeable, + * this can be done once at the program beginning for direct + * access case. By this we overcome limitations of only current + * headroom being accessible. + */ + return sk_skb_try_make_writable(skb, len ? : skb_headlen(skb)); +} + +static const struct bpf_func_proto sk_skb_pull_data_proto = { + .func = sk_skb_pull_data, + .gpl_only = false, + .ret_type = RET_INTEGER, + .arg1_type = ARG_PTR_TO_CTX, + .arg2_type = ARG_ANYTHING, +}; + BPF_CALL_5(bpf_l3_csum_replace, struct sk_buff *, skb, u32, offset, u64, from, u64, to, u64, flags) { @@ -2864,8 +2895,8 @@ static int bpf_skb_trim_rcsum(struct sk_buff *skb, unsigned int new_len) return __skb_trim_rcsum(skb, new_len); } -BPF_CALL_3(bpf_skb_change_tail, struct sk_buff *, skb, u32, new_len, - u64, flags) +static inline int __bpf_skb_change_tail(struct sk_buff *skb, u32 new_len, + u64 flags) { u32 max_len = __bpf_skb_max_len(skb); u32 min_len = __bpf_skb_min_len(skb); @@ -2901,6 +2932,13 @@ BPF_CALL_3(bpf_skb_change_tail, struct sk_buff *, skb, u32, new_len, if (!ret && skb_is_gso(skb)) skb_gso_reset(skb); } + return ret; +} + +BPF_CALL_3(bpf_skb_change_tail, struct sk_buff *, skb, u32, new_len, + u64, flags) +{ + int ret = __bpf_skb_change_tail(skb, new_len, flags); bpf_compute_data_pointers(skb); return ret; @@ -2915,8 +2953,26 @@ static const struct bpf_func_proto bpf_skb_change_tail_proto = { .arg3_type = ARG_ANYTHING, }; -BPF_CALL_3(bpf_skb_change_head, struct sk_buff *, skb, u32, head_room, +BPF_CALL_3(sk_skb_change_tail, struct sk_buff *, skb, u32, new_len, u64, flags) +{ + int ret = __bpf_skb_change_tail(skb, new_len, flags); + + bpf_compute_data_end_sk_skb(skb); + return ret; +} + +static const struct bpf_func_proto sk_skb_change_tail_proto = { + .func = sk_skb_change_tail, + .gpl_only = false, + .ret_type = RET_INTEGER, + .arg1_type = ARG_PTR_TO_CTX, + .arg2_type = ARG_ANYTHING, + .arg3_type = ARG_ANYTHING, +}; + +static inline int __bpf_skb_change_head(struct sk_buff *skb, u32 head_room, + u64 flags) { u32 max_len = __bpf_skb_max_len(skb); u32 new_len = skb->len + head_room; @@ -2942,8 +2998,16 @@ BPF_CALL_3(bpf_skb_change_head, struct sk_buff *, skb, u32, head_room, skb_reset_mac_header(skb); } + return ret; +} + +BPF_CALL_3(bpf_skb_change_head, struct sk_buff *, skb, u32, head_room, + u64, flags) +{ + int ret = __bpf_skb_change_head(skb, head_room, flags); + bpf_compute_data_pointers(skb); - return 0; + return ret; } static const struct bpf_func_proto bpf_skb_change_head_proto = { @@ -2955,6 +3019,23 @@ static const struct bpf_func_proto bpf_skb_change_head_proto = { .arg3_type = ARG_ANYTHING, }; +BPF_CALL_3(sk_skb_change_head, struct sk_buff *, skb, u32, head_room, + u64, flags) +{ + int ret = __bpf_skb_change_head(skb, head_room, flags); + + bpf_compute_data_end_sk_skb(skb); + return ret; +} + +static const struct bpf_func_proto sk_skb_change_head_proto = { + .func = sk_skb_change_head, + .gpl_only = false, + .ret_type = RET_INTEGER, + .arg1_type = ARG_PTR_TO_CTX, + .arg2_type = ARG_ANYTHING, + .arg3_type = ARG_ANYTHING, +}; static unsigned long xdp_get_metalen(const struct xdp_buff *xdp) { return xdp_data_meta_unsupported(xdp) ? 0 : @@ -4618,9 +4699,12 @@ bool bpf_helper_changes_pkt_data(void *func) func == bpf_skb_store_bytes || func == bpf_skb_change_proto || func == bpf_skb_change_head || + func == sk_skb_change_head || func == bpf_skb_change_tail || + func == sk_skb_change_tail || func == bpf_skb_adjust_room || func == bpf_skb_pull_data || + func == sk_skb_pull_data || func == bpf_clone_redirect || func == bpf_l3_csum_replace || func == bpf_l4_csum_replace || @@ -4872,11 +4956,11 @@ sk_skb_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog) case BPF_FUNC_skb_load_bytes: return &bpf_skb_load_bytes_proto; case BPF_FUNC_skb_pull_data: - return &bpf_skb_pull_data_proto; + return &sk_skb_pull_data_proto; case BPF_FUNC_skb_change_tail: - return &bpf_skb_change_tail_proto; + return &sk_skb_change_tail_proto; case BPF_FUNC_skb_change_head: - return &bpf_skb_change_head_proto; + return &sk_skb_change_head_proto; case BPF_FUNC_get_socket_cookie: return &bpf_get_socket_cookie_proto; case BPF_FUNC_get_socket_uid: -- cgit v1.2.3 From d8d7218ad842e18fc6976b87c08ed749e8d56313 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Fri, 6 Jul 2018 11:49:00 +0900 Subject: xdp: XDP_REDIRECT should check IFF_UP and MTU Otherwise we end up with attempting to send packets from down devices or to send oversized packets, which may cause unexpected driver/device behaviour. Generic XDP has already done this check, so reuse the logic in native XDP. Fixes: 814abfabef3c ("xdp: add bpf_redirect helper function") Signed-off-by: Toshiaki Makita Signed-off-by: Alexei Starovoitov --- include/linux/filter.h | 6 +++--- kernel/bpf/devmap.c | 7 ++++++- net/core/filter.c | 9 +++++++-- 3 files changed, 16 insertions(+), 6 deletions(-) diff --git a/include/linux/filter.h b/include/linux/filter.h index 300baad62c88..c73dd7396886 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -765,8 +765,8 @@ static inline bool bpf_dump_raw_ok(void) struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off, const struct bpf_insn *patch, u32 len); -static inline int __xdp_generic_ok_fwd_dev(struct sk_buff *skb, - struct net_device *fwd) +static inline int xdp_ok_fwd_dev(const struct net_device *fwd, + unsigned int pktlen) { unsigned int len; @@ -774,7 +774,7 @@ static inline int __xdp_generic_ok_fwd_dev(struct sk_buff *skb, return -ENETDOWN; len = fwd->mtu + fwd->hard_header_len + VLAN_HLEN; - if (skb->len > len) + if (pktlen > len) return -EMSGSIZE; return 0; diff --git a/kernel/bpf/devmap.c b/kernel/bpf/devmap.c index 642c97f6d1b8..d361fc1e3bf3 100644 --- a/kernel/bpf/devmap.c +++ b/kernel/bpf/devmap.c @@ -334,10 +334,15 @@ int dev_map_enqueue(struct bpf_dtab_netdev *dst, struct xdp_buff *xdp, { struct net_device *dev = dst->dev; struct xdp_frame *xdpf; + int err; if (!dev->netdev_ops->ndo_xdp_xmit) return -EOPNOTSUPP; + err = xdp_ok_fwd_dev(dev, xdp->data_end - xdp->data); + if (unlikely(err)) + return err; + xdpf = convert_to_xdp_frame(xdp); if (unlikely(!xdpf)) return -EOVERFLOW; @@ -350,7 +355,7 @@ int dev_map_generic_redirect(struct bpf_dtab_netdev *dst, struct sk_buff *skb, { int err; - err = __xdp_generic_ok_fwd_dev(skb, dst->dev); + err = xdp_ok_fwd_dev(dst->dev, skb->len); if (unlikely(err)) return err; skb->dev = dst->dev; diff --git a/net/core/filter.c b/net/core/filter.c index 470268024a40..5fa66a33927f 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -3128,12 +3128,16 @@ static int __bpf_tx_xdp(struct net_device *dev, u32 index) { struct xdp_frame *xdpf; - int sent; + int err, sent; if (!dev->netdev_ops->ndo_xdp_xmit) { return -EOPNOTSUPP; } + err = xdp_ok_fwd_dev(dev, xdp->data_end - xdp->data); + if (unlikely(err)) + return err; + xdpf = convert_to_xdp_frame(xdp); if (unlikely(!xdpf)) return -EOVERFLOW; @@ -3367,7 +3371,8 @@ int xdp_do_generic_redirect(struct net_device *dev, struct sk_buff *skb, goto err; } - if (unlikely((err = __xdp_generic_ok_fwd_dev(skb, fwd)))) + err = xdp_ok_fwd_dev(fwd, skb->len); + if (unlikely(err)) goto err; skb->dev = fwd; -- cgit v1.2.3 From 47a18a2dabba99c749b88867a9eef7ca48058e92 Mon Sep 17 00:00:00 2001 From: Adam Borowski Date: Sat, 7 Jul 2018 02:15:48 +0200 Subject: scripts: teach extract-vmlinux about LZ4 and ZSTD Note that the LZ4 signature is different than that of modern LZ4 as we use the "legacy" format which suffers from some downsides like inability to disable compression. Signed-off-by: Adam Borowski Signed-off-by: Masahiro Yamada --- scripts/extract-vmlinux | 2 ++ 1 file changed, 2 insertions(+) diff --git a/scripts/extract-vmlinux b/scripts/extract-vmlinux index 5061abcc2540..e6239f39abad 100755 --- a/scripts/extract-vmlinux +++ b/scripts/extract-vmlinux @@ -57,6 +57,8 @@ try_decompress '\3757zXZ\000' abcde unxz try_decompress 'BZh' xy bunzip2 try_decompress '\135\0\0\0' xxx unlzma try_decompress '\211\114\132' xy 'lzop -d' +try_decompress '\002!L\030' xxx 'lz4 -d' +try_decompress '(\265/\375' xxx unzstd # Bail out: echo "$me: Cannot find vmlinux." >&2 -- cgit v1.2.3 From e7372197e15856ec4ee66b668020a662994db103 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Sat, 7 Jul 2018 16:15:26 -0700 Subject: net/ipv4: Set oif in fib_compute_spec_dst Xin reported that icmp replies may not use the address on the device the echo request is received if the destination address is broadcast. Instead a route lookup is done without considering VRF context. Fix by setting oif in flow struct to the master device if it is enslaved. That directs the lookup to the VRF table. If the device is not enslaved, oif is still 0 so no affect. Fixes: cd2fbe1b6b51 ("net: Use VRF device index for lookups on RX") Reported-by: Xin Long Signed-off-by: David Ahern Signed-off-by: David S. Miller --- net/ipv4/fib_frontend.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index b21833651394..e46cdd310e5f 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -300,6 +300,7 @@ __be32 fib_compute_spec_dst(struct sk_buff *skb) if (!ipv4_is_zeronet(ip_hdr(skb)->saddr)) { struct flowi4 fl4 = { .flowi4_iif = LOOPBACK_IFINDEX, + .flowi4_oif = l3mdev_master_ifindex_rcu(dev), .daddr = ip_hdr(skb)->saddr, .flowi4_tos = RT_TOS(ip_hdr(skb)->tos), .flowi4_scope = scope, -- cgit v1.2.3 From acc2cf4e37174646a24cba42fa53c668b2338d4e Mon Sep 17 00:00:00 2001 From: Lorenzo Colitti Date: Sat, 7 Jul 2018 16:31:40 +0900 Subject: net: diag: Don't double-free TCP_NEW_SYN_RECV sockets in tcp_abort When tcp_diag_destroy closes a TCP_NEW_SYN_RECV socket, it first frees it by calling inet_csk_reqsk_queue_drop_and_and_put in tcp_abort, and then frees it again by calling sock_gen_put. Since tcp_abort only has one caller, and all the other codepaths in tcp_abort don't free the socket, just remove the free in that function. Cc: David Ahern Tested: passes Android sock_diag_test.py, which exercises this codepath Fixes: d7226c7a4dd1 ("net: diag: Fix refcnt leak in error path destroying socket") Signed-off-by: Lorenzo Colitti Signed-off-by: Eric Dumazet Reviewed-by: David Ahern Tested-by: David Ahern Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index e7b53d2a971f..c959bb6ea4ed 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -3720,8 +3720,7 @@ int tcp_abort(struct sock *sk, int err) struct request_sock *req = inet_reqsk(sk); local_bh_disable(); - inet_csk_reqsk_queue_drop_and_put(req->rsk_listener, - req); + inet_csk_reqsk_queue_drop(req->rsk_listener, req); local_bh_enable(); return 0; } -- cgit v1.2.3 From f6f2a4a2eb92bc73671204198bb2f8ab53ff59fb Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Fri, 6 Jul 2018 12:30:20 +0200 Subject: ipfrag: really prevent allocation on netns exit Setting the low threshold to 0 has no effect on frags allocation, we need to clear high_thresh instead. The code was pre-existent to commit 648700f76b03 ("inet: frags: use rhashtables for reassembly units"), but before the above, such assignment had a different role: prevent concurrent eviction from the worker and the netns cleanup helper. Fixes: 648700f76b03 ("inet: frags: use rhashtables for reassembly units") Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller --- net/ipv4/inet_fragment.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c index c9e35b81d093..1e4cf3ab560f 100644 --- a/net/ipv4/inet_fragment.c +++ b/net/ipv4/inet_fragment.c @@ -90,7 +90,7 @@ static void inet_frags_free_cb(void *ptr, void *arg) void inet_frags_exit_net(struct netns_frags *nf) { - nf->low_thresh = 0; /* prevent creation of new frags */ + nf->high_thresh = 0; /* prevent creation of new frags */ rhashtable_free_and_destroy(&nf->rhashtable, inet_frags_free_cb, NULL); } -- cgit v1.2.3 From 6508b6781be076f889e3077a1a5fadf1930a569d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 7 Jul 2018 23:00:01 -0700 Subject: tcp: cleanup copied_seq and urg_data in tcp_disconnect tcp_zerocopy_receive() relies on tcp_inq() to limit number of bytes requested by user. syzbot found that after tcp_disconnect(), tcp_inq() was returning a stale value (number of bytes in queue before the disconnect). Note that after this patch, ioctl(fd, SIOCINQ, &val) is also fixed and returns 0, so this might be a candidate for all known linux kernels. While we are at this, we probably also should clear urg_data to avoid other syzkaller reports after it discovers how to deal with urgent data. syzkaller repro : socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 3 bind(3, {sa_family=AF_INET, sin_port=htons(20000), sin_addr=inet_addr("224.0.0.1")}, 16) = 0 connect(3, {sa_family=AF_INET, sin_port=htons(20000), sin_addr=inet_addr("127.0.0.1")}, 16) = 0 send(3, ..., 4096, 0) = 4096 connect(3, {sa_family=AF_UNSPEC, sa_data="\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 128) = 0 getsockopt(3, SOL_TCP, TCP_ZEROCOPY_RECEIVE, ..., [16]) = 0 // CRASH Fixes: 05255b823a61 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index c959bb6ea4ed..0d43705dd001 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2562,6 +2562,8 @@ int tcp_disconnect(struct sock *sk, int flags) tcp_clear_xmit_timers(sk); __skb_queue_purge(&sk->sk_receive_queue); + tp->copied_seq = tp->rcv_nxt; + tp->urg_data = 0; tcp_write_queue_purge(sk); tcp_fastopen_active_disable_ofo_check(sk); skb_rbtree_purge(&tp->out_of_order_queue); -- cgit v1.2.3 From 1e4b044d22517cae7047c99038abb444423243ca Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 8 Jul 2018 16:34:02 -0700 Subject: Linux 4.18-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index d15ac32afbaf..925c55f2524f 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 4 PATCHLEVEL = 18 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Merciless Moray # *DOCUMENTATION* -- cgit v1.2.3 From 3156b53c2e2fadafa1a16412a8791b38f94b5bdc Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 6 Jul 2018 16:28:28 +0200 Subject: drm/sun4i: link in front-end code if needed When the base sun4i DRM driver is built-in but the back-end is a loadable module, we run into a link error: drivers/gpu/drm/sun4i/sun4i_drv.o: In function `sun4i_drv_probe': sun4i_drv.c:(.text+0x60c): undefined reference to `sun4i_frontend_of_table' The dependency is a bit tricky, the best workaround I have come up with is to use a Makefile hack to to interpret both CONFIG_DRM_SUN4I_BACKEND=m and CONFIG_DRM_SUN4I_BACKEND=y as a directive to build the front-end the same way as the main module. Fixes: dd0421f47505 ("drm/sun4i: Add a driver for the display frontend") Link: https://lore.kernel.org/lkml/20180301091908.zcptz3ezqr2c6ly5@flea/ Signed-off-by: Arnd Bergmann Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20180706142847.2032381-1-arnd@arndb.de --- drivers/gpu/drm/sun4i/Makefile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile index 2589f4acd5ae..9c81301d0eed 100644 --- a/drivers/gpu/drm/sun4i/Makefile +++ b/drivers/gpu/drm/sun4i/Makefile @@ -32,7 +32,10 @@ obj-$(CONFIG_DRM_SUN4I) += sun4i-tcon.o obj-$(CONFIG_DRM_SUN4I) += sun4i_tv.o obj-$(CONFIG_DRM_SUN4I) += sun6i_drc.o -obj-$(CONFIG_DRM_SUN4I_BACKEND) += sun4i-backend.o sun4i-frontend.o +obj-$(CONFIG_DRM_SUN4I_BACKEND) += sun4i-backend.o +ifdef CONFIG_DRM_SUN4I_BACKEND +obj-$(CONFIG_DRM_SUN4I) += sun4i-frontend.o +endif obj-$(CONFIG_DRM_SUN4I_HDMI) += sun4i-drm-hdmi.o obj-$(CONFIG_DRM_SUN6I_DSI) += sun6i-dsi.o obj-$(CONFIG_DRM_SUN8I_DW_HDMI) += sun8i-drm-hdmi.o -- cgit v1.2.3 From 20f330452ad8814f2289a589baf65e21270879a7 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Fri, 22 Sep 2017 14:13:53 +0200 Subject: ieee802154: at86rf230: switch from BUG_ON() to WARN_ON() on problem The check is valid but it does not warrant to crash the kernel. A WARN_ON() is good enough here. Found by checkpatch. Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/at86rf230.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 77abedf0b524..7b3a381d198a 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -940,7 +940,7 @@ at86rf230_xmit(struct ieee802154_hw *hw, struct sk_buff *skb) static int at86rf230_ed(struct ieee802154_hw *hw, u8 *level) { - BUG_ON(!level); + WARN_ON(!level); *level = 0xbe; return 0; } -- cgit v1.2.3 From 8a81388ec27c4c0adbdecd20e67bb5f411ab46b2 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Fri, 22 Sep 2017 14:13:54 +0200 Subject: ieee802154: at86rf230: use __func__ macro for debug messages Instead of having the function name hard-coded (it might change and we forgot to update them in the debug output) we can use __func__ instead and also shorter the line so we do not need to break it. Also fix an extra blank line while being here. Found by checkpatch. Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/at86rf230.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 7b3a381d198a..3d9e91579866 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -1121,8 +1121,7 @@ at86rf230_set_hw_addr_filt(struct ieee802154_hw *hw, if (changed & IEEE802154_AFILT_SADDR_CHANGED) { u16 addr = le16_to_cpu(filt->short_addr); - dev_vdbg(&lp->spi->dev, - "at86rf230_set_hw_addr_filt called for saddr\n"); + dev_vdbg(&lp->spi->dev, "%s called for saddr\n", __func__); __at86rf230_write(lp, RG_SHORT_ADDR_0, addr); __at86rf230_write(lp, RG_SHORT_ADDR_1, addr >> 8); } @@ -1130,8 +1129,7 @@ at86rf230_set_hw_addr_filt(struct ieee802154_hw *hw, if (changed & IEEE802154_AFILT_PANID_CHANGED) { u16 pan = le16_to_cpu(filt->pan_id); - dev_vdbg(&lp->spi->dev, - "at86rf230_set_hw_addr_filt called for pan id\n"); + dev_vdbg(&lp->spi->dev, "%s called for pan id\n", __func__); __at86rf230_write(lp, RG_PAN_ID_0, pan); __at86rf230_write(lp, RG_PAN_ID_1, pan >> 8); } @@ -1140,15 +1138,13 @@ at86rf230_set_hw_addr_filt(struct ieee802154_hw *hw, u8 i, addr[8]; memcpy(addr, &filt->ieee_addr, 8); - dev_vdbg(&lp->spi->dev, - "at86rf230_set_hw_addr_filt called for IEEE addr\n"); + dev_vdbg(&lp->spi->dev, "%s called for IEEE addr\n", __func__); for (i = 0; i < 8; i++) __at86rf230_write(lp, RG_IEEE_ADDR_0 + i, addr[i]); } if (changed & IEEE802154_AFILT_PANC_CHANGED) { - dev_vdbg(&lp->spi->dev, - "at86rf230_set_hw_addr_filt called for panc change\n"); + dev_vdbg(&lp->spi->dev, "%s called for panc change\n", __func__); if (filt->pan_coord) at86rf230_write_subreg(lp, SR_AACK_I_AM_COORD, 1); else @@ -1252,7 +1248,6 @@ at86rf230_set_cca_mode(struct ieee802154_hw *hw, return at86rf230_write_subreg(lp, SR_CCA_MODE, val); } - static int at86rf230_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm) { -- cgit v1.2.3 From 8f2fbc6c60ff213369e06a73610fc882a42fdf20 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Fri, 22 Sep 2017 14:14:05 +0200 Subject: ieee802154: fakelb: switch from BUG_ON() to WARN_ON() on problem The check is valid but it does not warrant to crash the kernel. A WARN_ON() is good enough here. Found by checkpatch. Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/fakelb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/fakelb.c b/drivers/net/ieee802154/fakelb.c index 0d673f7682ee..176395e4b7bb 100644 --- a/drivers/net/ieee802154/fakelb.c +++ b/drivers/net/ieee802154/fakelb.c @@ -49,7 +49,7 @@ struct fakelb_phy { static int fakelb_hw_ed(struct ieee802154_hw *hw, u8 *level) { - BUG_ON(!level); + WARN_ON(!level); *level = 0xbe; return 0; -- cgit v1.2.3 From 4466b1f0e022f94a026bd700fee34bff15cdc4ef Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sat, 19 May 2018 04:07:10 +0300 Subject: gpu: host1x: Skip IOMMU initialization if firewall is enabled Host1x's CDMA can't access the command buffers if IOMMU and Host1x firewall are enabled in the kernels config because firewall doesn't map the copied buffer into IOVA space. Fix this by skipping IOMMU initialization if firewall is enabled as firewall merges sparse cmdbufs into a single contiguous buffer and hence IOMMU isn't needed in this case. Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding --- drivers/gpu/host1x/dev.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/host1x/dev.c b/drivers/gpu/host1x/dev.c index f1d5f76e9c33..d88073e7d22d 100644 --- a/drivers/gpu/host1x/dev.c +++ b/drivers/gpu/host1x/dev.c @@ -218,6 +218,9 @@ static int host1x_probe(struct platform_device *pdev) return err; } + if (IS_ENABLED(CONFIG_TEGRA_HOST1X_FIREWALL)) + goto skip_iommu; + host->group = iommu_group_get(&pdev->dev); if (host->group) { struct iommu_domain_geometry *geometry; -- cgit v1.2.3 From ec58923215dbbeef59ee82923ee94d745f73db58 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Fri, 6 Jul 2018 21:02:36 +0300 Subject: gpu: host1x: Check whether size of unpin isn't 0 Only gather pins are mapped by the Host1x driver, regular BO relocations are not. Check whether size of unpin isn't 0, otherwise IOVA allocation at 0x0 could be erroneously released. Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding --- drivers/gpu/host1x/job.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/host1x/job.c b/drivers/gpu/host1x/job.c index e2f4a4d93d20..527a1cddb14f 100644 --- a/drivers/gpu/host1x/job.c +++ b/drivers/gpu/host1x/job.c @@ -569,7 +569,8 @@ void host1x_job_unpin(struct host1x_job *job) for (i = 0; i < job->num_unpins; i++) { struct host1x_job_unpin_data *unpin = &job->unpins[i]; - if (!IS_ENABLED(CONFIG_TEGRA_HOST1X_FIREWALL) && host->domain) { + if (!IS_ENABLED(CONFIG_TEGRA_HOST1X_FIREWALL) && + unpin->size && host->domain) { iommu_unmap(host->domain, job->addr_phys[i], unpin->size); free_iova(&host->iova, -- cgit v1.2.3 From 5265f0338bc0feec6c0d544dfe005dec1a93cb93 Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Wed, 20 Jun 2018 16:03:58 +0300 Subject: drm/tegra: Fix comparison operator for buffer size Here we are checking for the buffer length, not an offset for writing to, so using > is correct. The current code incorrectly rejects a command buffer ending at the memory buffer's end. Signed-off-by: Mikko Perttunen Reviewed-by: Dmitry Osipenko Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/drm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c index 776c1513e582..a2bd5876c633 100644 --- a/drivers/gpu/drm/tegra/drm.c +++ b/drivers/gpu/drm/tegra/drm.c @@ -398,7 +398,7 @@ int tegra_drm_submit(struct tegra_drm_context *context, * unaligned offset is malformed and cause commands stream * corruption on the buffer address relocation. */ - if (offset & 3 || offset >= obj->gem.size) { + if (offset & 3 || offset > obj->gem.size) { err = -EINVAL; goto fail; } -- cgit v1.2.3 From f292b87d3ac020418644d8a4bbf29814890505cb Mon Sep 17 00:00:00 2001 From: Roman Gushchin Date: Fri, 6 Jul 2018 14:34:29 -0700 Subject: bpf: include errno.h from bpf-cgroup.h Commit fdb5c4531c1e ("bpf: fix attach type BPF_LIRC_MODE2 dependency wrt CONFIG_CGROUP_BPF") caused some build issues, detected by 0-DAY kernel test infrastructure. The problem is that cgroup_bpf_prog_attach/detach/query() functions can return -EINVAL error code, which is not defined. Fix this adding errno.h to includes. Fixes: fdb5c4531c1e ("bpf: fix attach type BPF_LIRC_MODE2 dependency wrt CONFIG_CGROUP_BPF") Signed-off-by: Roman Gushchin Cc: Sean Young Cc: Daniel Borkmann Cc: Alexei Starovoitov Signed-off-by: Daniel Borkmann --- include/linux/bpf-cgroup.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/bpf-cgroup.h b/include/linux/bpf-cgroup.h index 79795c5fa7c3..d50c2f0a655a 100644 --- a/include/linux/bpf-cgroup.h +++ b/include/linux/bpf-cgroup.h @@ -2,6 +2,7 @@ #ifndef _BPF_CGROUP_H #define _BPF_CGROUP_H +#include #include #include -- cgit v1.2.3 From 36d26d6b6208399070a9d7993534fef9fc26b1ba Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 25 Jun 2018 16:49:51 +0300 Subject: net: ieee802154: adf7242: Fix erroneous RX enable Only enable RX mode if the netdev is opened. Signed-off-by: Michael Hennerich Signed-off-by: Alexandru Ardelean Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/adf7242.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/adf7242.c b/drivers/net/ieee802154/adf7242.c index 64f1b1e77bc0..c3da43191f70 100644 --- a/drivers/net/ieee802154/adf7242.c +++ b/drivers/net/ieee802154/adf7242.c @@ -719,7 +719,10 @@ static int adf7242_channel(struct ieee802154_hw *hw, u8 page, u8 channel) adf7242_write_reg(lp, REG_CH_FREQ1, freq >> 8); adf7242_write_reg(lp, REG_CH_FREQ2, freq >> 16); - return adf7242_cmd(lp, CMD_RC_RX); + if (test_bit(FLAG_START, &lp->flags)) + return adf7242_cmd_rx(lp); + else + return adf7242_cmd(lp, CMD_RC_PHY_RDY); } static int adf7242_set_hw_addr_filt(struct ieee802154_hw *hw, -- cgit v1.2.3 From 58e9683d14752debc6f22daf6b23e031787df31f Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 25 Jun 2018 16:57:37 +0300 Subject: net: ieee802154: adf7242: Fix OCL calibration runs Reissuing RC_RX every 400ms - to adjust for offset drift in receiver see datasheet page 61, OCL section. Signed-off-by: Michael Hennerich Signed-off-by: Alexandru Ardelean Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/adf7242.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/adf7242.c b/drivers/net/ieee802154/adf7242.c index c3da43191f70..23a52b9293f3 100644 --- a/drivers/net/ieee802154/adf7242.c +++ b/drivers/net/ieee802154/adf7242.c @@ -275,6 +275,8 @@ struct adf7242_local { struct spi_message stat_msg; struct spi_transfer stat_xfer; struct dentry *debugfs_root; + struct delayed_work work; + struct workqueue_struct *wqueue; unsigned long flags; int tx_stat; bool promiscuous; @@ -575,10 +577,26 @@ static int adf7242_cmd_rx(struct adf7242_local *lp) /* Wait until the ACK is sent */ adf7242_wait_status(lp, RC_STATUS_PHY_RDY, RC_STATUS_MASK, __LINE__); adf7242_clear_irqstat(lp); + mod_delayed_work(lp->wqueue, &lp->work, msecs_to_jiffies(400)); return adf7242_cmd(lp, CMD_RC_RX); } +static void adf7242_rx_cal_work(struct work_struct *work) +{ + struct adf7242_local *lp = + container_of(work, struct adf7242_local, work.work); + + /* Reissuing RC_RX every 400ms - to adjust for offset + * drift in receiver (datasheet page 61, OCL section) + */ + + if (!test_bit(FLAG_XMIT, &lp->flags)) { + adf7242_cmd(lp, CMD_RC_PHY_RDY); + adf7242_cmd_rx(lp); + } +} + static int adf7242_set_txpower(struct ieee802154_hw *hw, int mbm) { struct adf7242_local *lp = hw->priv; @@ -686,7 +704,7 @@ static int adf7242_start(struct ieee802154_hw *hw) enable_irq(lp->spi->irq); set_bit(FLAG_START, &lp->flags); - return adf7242_cmd(lp, CMD_RC_RX); + return adf7242_cmd_rx(lp); } static void adf7242_stop(struct ieee802154_hw *hw) @@ -694,6 +712,7 @@ static void adf7242_stop(struct ieee802154_hw *hw) struct adf7242_local *lp = hw->priv; disable_irq(lp->spi->irq); + cancel_delayed_work_sync(&lp->work); adf7242_cmd(lp, CMD_RC_IDLE); clear_bit(FLAG_START, &lp->flags); adf7242_clear_irqstat(lp); @@ -817,6 +836,7 @@ static int adf7242_xmit(struct ieee802154_hw *hw, struct sk_buff *skb) /* ensure existing instances of the IRQ handler have completed */ disable_irq(lp->spi->irq); set_bit(FLAG_XMIT, &lp->flags); + cancel_delayed_work_sync(&lp->work); reinit_completion(&lp->tx_complete); adf7242_cmd(lp, CMD_RC_PHY_RDY); adf7242_clear_irqstat(lp); @@ -955,6 +975,7 @@ static irqreturn_t adf7242_isr(int irq, void *data) unsigned int xmit; u8 irq1; + mod_delayed_work(lp->wqueue, &lp->work, msecs_to_jiffies(400)); adf7242_read_reg(lp, REG_IRQ1_SRC1, &irq1); if (!(irq1 & (IRQ_RX_PKT_RCVD | IRQ_CSMA_CA))) @@ -1244,6 +1265,9 @@ static int adf7242_probe(struct spi_device *spi) spi_message_add_tail(&lp->stat_xfer, &lp->stat_msg); spi_set_drvdata(spi, lp); + INIT_DELAYED_WORK(&lp->work, adf7242_rx_cal_work); + lp->wqueue = alloc_ordered_workqueue(dev_name(&spi->dev), + WQ_MEM_RECLAIM); ret = adf7242_hw_init(lp); if (ret) @@ -1287,6 +1311,9 @@ static int adf7242_remove(struct spi_device *spi) if (!IS_ERR_OR_NULL(lp->debugfs_root)) debugfs_remove_recursive(lp->debugfs_root); + cancel_delayed_work_sync(&lp->work); + destroy_workqueue(lp->wqueue); + ieee802154_unregister_hw(lp->hw); mutex_destroy(&lp->bmux); ieee802154_free_hw(lp->hw); -- cgit v1.2.3 From fa85015c0d95884c8dc42f38e2f2d6137d436b67 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 9 Jul 2018 11:01:07 +0200 Subject: ACPICA: Clear status of all events when entering S5 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After commit 18996f2db918 (ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume) the status of ACPI events is not cleared any more when entering the ACPI S5 system state (power off) which causes some systems to power up immediately after turing off power in certain situations. That is a functional regression, so address it by making the code clear the status of all ACPI events again when entering S5 (for system-wide suspend or hibernation the clearing of the status of all events is not desirable, as it might cause the kernel to miss wakeup events sometimes). Fixes: 18996f2db918 (ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume) Reported-by: Takashi Iwai Tested-by: Thomas Hänig Cc: 4.17+ # 4.17+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/hwsleep.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index fc0c2e2328cd..fe9d46d81750 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -51,16 +51,23 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state) return_ACPI_STATUS(status); } - /* - * 1) Disable all GPEs - * 2) Enable all wakeup GPEs - */ + /* Disable all GPEs */ status = acpi_hw_disable_all_gpes(); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } + /* + * If the target sleep state is S5, clear all GPEs and fixed events too + */ + if (sleep_state == ACPI_STATE_S5) { + status = acpi_hw_clear_acpi_status(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } acpi_gbl_system_awake_and_running = FALSE; + /* Enable all wakeup GPEs */ status = acpi_hw_enable_all_wakeup_gpes(); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); -- cgit v1.2.3 From 92748beac07c471d995fbec642b63572dc01b3dc Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 4 Jul 2018 17:07:45 +0200 Subject: mmc: sdhci-esdhc-imx: allow 1.8V modes without 100/200MHz pinctrl states If pinctrl nodes for 100/200MHz are missing, the controller should not select any mode which need signal frequencies 100MHz or higher. To prevent such speed modes the driver currently uses the quirk flag SDHCI_QUIRK2_NO_1_8_V. This works nicely for SD cards since 1.8V signaling is required for all faster modes and slower modes use 3.3V signaling only. However, there are eMMC modes which use 1.8V signaling and run below 100MHz, e.g. DDR52 at 1.8V. With using SDHCI_QUIRK2_NO_1_8_V this mode is prevented. When using a fixed 1.8V regulator as vqmmc-supply the stack has no valid mode to use. In this tenuous situation the kernel continuously prints voltage switching errors: mmc1: Switching to 3.3V signalling voltage failed Avoid using SDHCI_QUIRK2_NO_1_8_V and prevent faster modes by altering the SDHCI capability register. With that the stack is able to select 1.8V modes even if no faster pinctrl states are available: # cat /sys/kernel/debug/mmc1/ios ... timing spec: 8 (mmc DDR52) signal voltage: 1 (1.80 V) ... Link: http://lkml.kernel.org/r/20180628081331.13051-1-stefan@agner.ch Signed-off-by: Stefan Agner Fixes: ad93220de7da ("mmc: sdhci-esdhc-imx: change pinctrl state according to uhs mode") Cc: # v4.13+ Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-esdhc-imx.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index d6aef70d34fa..4eb3d29ecde1 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -312,6 +312,15 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) if (imx_data->socdata->flags & ESDHC_FLAG_HS400) val |= SDHCI_SUPPORT_HS400; + + /* + * Do not advertise faster UHS modes if there are no + * pinctrl states for 100MHz/200MHz. + */ + if (IS_ERR_OR_NULL(imx_data->pins_100mhz) || + IS_ERR_OR_NULL(imx_data->pins_200mhz)) + val &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50 + | SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_HS400); } } @@ -1158,18 +1167,6 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, ESDHC_PINCTRL_STATE_100MHZ); imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl, ESDHC_PINCTRL_STATE_200MHZ); - if (IS_ERR(imx_data->pins_100mhz) || - IS_ERR(imx_data->pins_200mhz)) { - dev_warn(mmc_dev(host->mmc), - "could not get ultra high speed state, work on normal mode\n"); - /* - * fall back to not supporting uhs by specifying no - * 1.8v quirk - */ - host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; - } - } else { - host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; } /* call to generic mmc_of_parse to support additional capabilities */ -- cgit v1.2.3 From d378859a667edc99e3473704847698cae97ca2b1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 24 Jun 2018 14:35:10 +0100 Subject: drm/armada: fix colorkey mode property The colorkey mode property was not correctly disabling the colorkeying when "disabled" mode was selected. Arrange for this to work as one would expect. Signed-off-by: Russell King --- drivers/gpu/drm/armada/armada_hw.h | 1 + drivers/gpu/drm/armada/armada_overlay.c | 30 ++++++++++++++++++++++-------- 2 files changed, 23 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/armada/armada_hw.h b/drivers/gpu/drm/armada/armada_hw.h index 27319a8335e2..345dc4d0851e 100644 --- a/drivers/gpu/drm/armada/armada_hw.h +++ b/drivers/gpu/drm/armada/armada_hw.h @@ -160,6 +160,7 @@ enum { CFG_ALPHAM_GRA = 0x1 << 16, CFG_ALPHAM_CFG = 0x2 << 16, CFG_ALPHA_MASK = 0xff << 8, +#define CFG_ALPHA(x) ((x) << 8) CFG_PIXCMD_MASK = 0xff, }; diff --git a/drivers/gpu/drm/armada/armada_overlay.c b/drivers/gpu/drm/armada/armada_overlay.c index c391955009d6..afa7ded3ae31 100644 --- a/drivers/gpu/drm/armada/armada_overlay.c +++ b/drivers/gpu/drm/armada/armada_overlay.c @@ -28,6 +28,7 @@ struct armada_ovl_plane_properties { uint16_t contrast; uint16_t saturation; uint32_t colorkey_mode; + uint32_t colorkey_enable; }; struct armada_ovl_plane { @@ -54,11 +55,13 @@ armada_ovl_update_attr(struct armada_ovl_plane_properties *prop, writel_relaxed(0x00002000, dcrtc->base + LCD_SPU_CBSH_HUE); spin_lock_irq(&dcrtc->irq_lock); - armada_updatel(prop->colorkey_mode | CFG_ALPHAM_GRA, - CFG_CKMODE_MASK | CFG_ALPHAM_MASK | CFG_ALPHA_MASK, - dcrtc->base + LCD_SPU_DMA_CTRL1); - - armada_updatel(ADV_GRACOLORKEY, 0, dcrtc->base + LCD_SPU_ADV_REG); + armada_updatel(prop->colorkey_mode, + CFG_CKMODE_MASK | CFG_ALPHAM_MASK | CFG_ALPHA_MASK, + dcrtc->base + LCD_SPU_DMA_CTRL1); + if (dcrtc->variant->has_spu_adv_reg) + armada_updatel(prop->colorkey_enable, + ADV_GRACOLORKEY | ADV_VIDCOLORKEY, + dcrtc->base + LCD_SPU_ADV_REG); spin_unlock_irq(&dcrtc->irq_lock); } @@ -321,8 +324,17 @@ static int armada_ovl_plane_set_property(struct drm_plane *plane, dplane->prop.colorkey_vb |= K2B(val); update_attr = true; } else if (property == priv->colorkey_mode_prop) { - dplane->prop.colorkey_mode &= ~CFG_CKMODE_MASK; - dplane->prop.colorkey_mode |= CFG_CKMODE(val); + if (val == CKMODE_DISABLE) { + dplane->prop.colorkey_mode = + CFG_CKMODE(CKMODE_DISABLE) | + CFG_ALPHAM_CFG | CFG_ALPHA(255); + dplane->prop.colorkey_enable = 0; + } else { + dplane->prop.colorkey_mode = + CFG_CKMODE(val) | + CFG_ALPHAM_GRA | CFG_ALPHA(0); + dplane->prop.colorkey_enable = ADV_GRACOLORKEY; + } update_attr = true; } else if (property == priv->brightness_prop) { dplane->prop.brightness = val - 256; @@ -453,7 +465,9 @@ int armada_overlay_plane_create(struct drm_device *dev, unsigned long crtcs) dplane->prop.colorkey_yr = 0xfefefe00; dplane->prop.colorkey_ug = 0x01010100; dplane->prop.colorkey_vb = 0x01010100; - dplane->prop.colorkey_mode = CFG_CKMODE(CKMODE_RGB); + dplane->prop.colorkey_mode = CFG_CKMODE(CKMODE_RGB) | + CFG_ALPHAM_GRA | CFG_ALPHA(0); + dplane->prop.colorkey_enable = ADV_GRACOLORKEY; dplane->prop.brightness = 0; dplane->prop.contrast = 0x4000; dplane->prop.saturation = 0x4000; -- cgit v1.2.3 From 92298c1cd8e8a6b56322b602ad72b54e6237631d Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 26 Jun 2018 17:06:06 +0100 Subject: drm/armada: fix irq handling Add the missing locks to the IRQ enable/disable paths, and fix a comment in the interrupt handler: reading the ISR clears down the status bits, but does not reset the interrupt so it can signal again. That seems to require a write. Signed-off-by: Russell King --- drivers/gpu/drm/armada/armada_crtc.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/armada/armada_crtc.c b/drivers/gpu/drm/armada/armada_crtc.c index 03eeee11dd5b..42a40daff132 100644 --- a/drivers/gpu/drm/armada/armada_crtc.c +++ b/drivers/gpu/drm/armada/armada_crtc.c @@ -519,8 +519,9 @@ static irqreturn_t armada_drm_irq(int irq, void *arg) u32 v, stat = readl_relaxed(dcrtc->base + LCD_SPU_IRQ_ISR); /* - * This is rediculous - rather than writing bits to clear, we - * have to set the actual status register value. This is racy. + * Reading the ISR appears to clear bits provided CLEAN_SPU_IRQ_ISR + * is set. Writing has some other effect to acknowledge the IRQ - + * without this, we only get a single IRQ. */ writel_relaxed(0, dcrtc->base + LCD_SPU_IRQ_ISR); @@ -1116,16 +1117,22 @@ armada_drm_crtc_set_property(struct drm_crtc *crtc, static int armada_drm_crtc_enable_vblank(struct drm_crtc *crtc) { struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); + unsigned long flags; + spin_lock_irqsave(&dcrtc->irq_lock, flags); armada_drm_crtc_enable_irq(dcrtc, VSYNC_IRQ_ENA); + spin_unlock_irqrestore(&dcrtc->irq_lock, flags); return 0; } static void armada_drm_crtc_disable_vblank(struct drm_crtc *crtc) { struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); + unsigned long flags; + spin_lock_irqsave(&dcrtc->irq_lock, flags); armada_drm_crtc_disable_irq(dcrtc, VSYNC_IRQ_ENA); + spin_unlock_irqrestore(&dcrtc->irq_lock, flags); } static const struct drm_crtc_funcs armada_crtc_funcs = { @@ -1415,6 +1422,7 @@ static int armada_drm_crtc_create(struct drm_device *drm, struct device *dev, CFG_PDWN64x66, dcrtc->base + LCD_SPU_SRAM_PARA1); writel_relaxed(0x2032ff81, dcrtc->base + LCD_SPU_DMA_CTRL1); writel_relaxed(dcrtc->irq_ena, dcrtc->base + LCD_SPU_IRQ_ENA); + readl_relaxed(dcrtc->base + LCD_SPU_IRQ_ISR); writel_relaxed(0, dcrtc->base + LCD_SPU_IRQ_ISR); ret = devm_request_irq(dev, irq, armada_drm_irq, 0, "armada_drm_crtc", -- cgit v1.2.3 From ef6eaf27274c0351f7059163918f3795da13199c Mon Sep 17 00:00:00 2001 From: Jason Andryuk Date: Fri, 22 Jun 2018 12:25:49 -0400 Subject: HID: i2c-hid: Fix "incomplete report" noise Commit ac75a041048b ("HID: i2c-hid: fix size check and type usage") started writing messages when the ret_size is <= 2 from i2c_master_recv. However, my device i2c-DLL07D1 returns 2 for a short period of time (~0.5s) after I stop moving the pointing stick or touchpad. It varies, but you get ~50 messages each time which spams the log hard. [ 95.925055] i2c_hid i2c-DLL07D1:01: i2c_hid_get_input: incomplete report (83/2) This has also been observed with a i2c-ALP0017. [ 1781.266353] i2c_hid i2c-ALP0017:00: i2c_hid_get_input: incomplete report (30/2) Only print the message when ret_size is totally invalid and less than 2 to cut down on the log spam. Fixes: ac75a041048b ("HID: i2c-hid: fix size check and type usage") Reported-by: John Smith Cc: stable@vger.kernel.org Signed-off-by: Jason Andryuk Signed-off-by: Jiri Kosina --- drivers/hid/i2c-hid/i2c-hid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c index c1652bb7bd15..eae0cb3ddec6 100644 --- a/drivers/hid/i2c-hid/i2c-hid.c +++ b/drivers/hid/i2c-hid/i2c-hid.c @@ -484,7 +484,7 @@ static void i2c_hid_get_input(struct i2c_hid *ihid) return; } - if ((ret_size > size) || (ret_size <= 2)) { + if ((ret_size > size) || (ret_size < 2)) { dev_err(&ihid->client->dev, "%s: incomplete report (%d/%d)\n", __func__, size, ret_size); return; -- cgit v1.2.3 From 4f65245f2d178b9cba48350620d76faa4a098841 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Fri, 29 Jun 2018 17:08:44 -0500 Subject: HID: hiddev: fix potential Spectre v1 uref->field_index, uref->usage_index, finfo.field_index and cinfo.index can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/hid/usbhid/hiddev.c:473 hiddev_ioctl_usage() warn: potential spectre issue 'report->field' (local cap) drivers/hid/usbhid/hiddev.c:477 hiddev_ioctl_usage() warn: potential spectre issue 'field->usage' (local cap) drivers/hid/usbhid/hiddev.c:757 hiddev_ioctl() warn: potential spectre issue 'report->field' (local cap) drivers/hid/usbhid/hiddev.c:801 hiddev_ioctl() warn: potential spectre issue 'hid->collection' (local cap) Fix this by sanitizing such structure fields before using them to index report->field, field->usage and hid->collection Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hiddev.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index e3ce233f8bdc..23872d08308c 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -36,6 +36,7 @@ #include #include #include +#include #include "usbhid.h" #ifdef CONFIG_USB_DYNAMIC_MINORS @@ -469,10 +470,14 @@ static noinline int hiddev_ioctl_usage(struct hiddev *hiddev, unsigned int cmd, if (uref->field_index >= report->maxfield) goto inval; + uref->field_index = array_index_nospec(uref->field_index, + report->maxfield); field = report->field[uref->field_index]; if (uref->usage_index >= field->maxusage) goto inval; + uref->usage_index = array_index_nospec(uref->usage_index, + field->maxusage); uref->usage_code = field->usage[uref->usage_index].hid; @@ -499,6 +504,8 @@ static noinline int hiddev_ioctl_usage(struct hiddev *hiddev, unsigned int cmd, if (uref->field_index >= report->maxfield) goto inval; + uref->field_index = array_index_nospec(uref->field_index, + report->maxfield); field = report->field[uref->field_index]; @@ -753,6 +760,8 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) if (finfo.field_index >= report->maxfield) break; + finfo.field_index = array_index_nospec(finfo.field_index, + report->maxfield); field = report->field[finfo.field_index]; memset(&finfo, 0, sizeof(finfo)); @@ -797,6 +806,8 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) if (cinfo.index >= hid->maxcollection) break; + cinfo.index = array_index_nospec(cinfo.index, + hid->maxcollection); cinfo.type = hid->collection[cinfo.index].type; cinfo.usage = hid->collection[cinfo.index].usage; -- cgit v1.2.3 From 21d5e078192d244df3d6049f9464fff2f72cfd68 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 6 Jul 2018 20:06:05 +0200 Subject: netfilter: nft_compat: explicitly reject ERROR and standard target iptables-nft never requests these, but make this explicitly illegal. If it were quested, kernel could oops as ->eval is NULL, furthermore, the builtin targets have no owning module so its possible to rmmod eb/ip/ip6_tables module even if they would be loaded. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_compat.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c index 8d1ff654e5af..32535eea51b2 100644 --- a/net/netfilter/nft_compat.c +++ b/net/netfilter/nft_compat.c @@ -832,10 +832,18 @@ nft_target_select_ops(const struct nft_ctx *ctx, rev = ntohl(nla_get_be32(tb[NFTA_TARGET_REV])); family = ctx->family; + if (strcmp(tg_name, XT_ERROR_TARGET) == 0 || + strcmp(tg_name, XT_STANDARD_TARGET) == 0 || + strcmp(tg_name, "standard") == 0) + return ERR_PTR(-EINVAL); + /* Re-use the existing target if it's already loaded. */ list_for_each_entry(nft_target, &nft_target_list, head) { struct xt_target *target = nft_target->ops.data; + if (!target->target) + continue; + if (nft_target_cmp(target, tg_name, rev, family)) return &nft_target->ops; } @@ -844,6 +852,11 @@ nft_target_select_ops(const struct nft_ctx *ctx, if (IS_ERR(target)) return ERR_PTR(-ENOENT); + if (!target->target) { + err = -EINVAL; + goto err; + } + if (target->targetsize > nla_len(tb[NFTA_TARGET_INFO])) { err = -EINVAL; goto err; -- cgit v1.2.3 From 2045cdfa1b40d66f126f3fd05604fc7c754f0022 Mon Sep 17 00:00:00 2001 From: Andrey Ryabinin Date: Fri, 6 Jul 2018 16:38:53 +0300 Subject: netfilter: nf_conntrack: Fix possible possible crash on module loading. Loading the nf_conntrack module with doubled hashsize parameter, i.e. modprobe nf_conntrack hashsize=12345 hashsize=12345 causes NULL-ptr deref. If 'hashsize' specified twice, the nf_conntrack_set_hashsize() function will be called also twice. The first nf_conntrack_set_hashsize() call will set the 'nf_conntrack_htable_size' variable: nf_conntrack_set_hashsize() ... /* On boot, we can set this without any fancy locking. */ if (!nf_conntrack_htable_size) return param_set_uint(val, kp); But on the second invocation, the nf_conntrack_htable_size is already set, so the nf_conntrack_set_hashsize() will take a different path and call the nf_conntrack_hash_resize() function. Which will crash on the attempt to dereference 'nf_conntrack_hash' pointer: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: 0010:nf_conntrack_hash_resize+0x255/0x490 [nf_conntrack] Call Trace: nf_conntrack_set_hashsize+0xcd/0x100 [nf_conntrack] parse_args+0x1f9/0x5a0 load_module+0x1281/0x1a50 __se_sys_finit_module+0xbe/0xf0 do_syscall_64+0x7c/0x390 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix this, by checking !nf_conntrack_hash instead of !nf_conntrack_htable_size. nf_conntrack_hash will be initialized only after the module loaded, so the second invocation of the nf_conntrack_set_hashsize() won't crash, it will just reinitialize nf_conntrack_htable_size again. Signed-off-by: Andrey Ryabinin Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 3465da2a98bd..3d5280425027 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -2043,7 +2043,7 @@ int nf_conntrack_set_hashsize(const char *val, const struct kernel_param *kp) return -EOPNOTSUPP; /* On boot, we can set this without any fancy locking. */ - if (!nf_conntrack_htable_size) + if (!nf_conntrack_hash) return param_set_uint(val, kp); rc = kstrtouint(val, 0, &hashsize); -- cgit v1.2.3 From 84379c9afe011020e797e3f50a662b08a6355dcf Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 9 Jul 2018 13:43:38 +0200 Subject: netfilter: ipv6: nf_defrag: drop skb dst before queueing Eric Dumazet reports: Here is a reproducer of an annoying bug detected by syzkaller on our production kernel [..] ./b78305423 enable_conntrack Then : sleep 60 dmesg | tail -10 [ 171.599093] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 181.631024] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 191.687076] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 201.703037] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 211.711072] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 221.959070] unregister_netdevice: waiting for lo to become free. Usage count = 2 Reproducer sends ipv6 fragment that hits nfct defrag via LOCAL_OUT hook. skb gets queued until frag timer expiry -- 1 minute. Normally nf_conntrack_reasm gets called during prerouting, so skb has no dst yet which might explain why this wasn't spotted earlier. Reported-by: Eric Dumazet Reported-by: John Sperbeck Signed-off-by: Florian Westphal Tested-by: Eric Dumazet Reported-by: syzbot Signed-off-by: Pablo Neira Ayuso --- net/ipv6/netfilter/nf_conntrack_reasm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index a452d99c9f52..e4d9e6976d3c 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -585,6 +585,8 @@ int nf_ct_frag6_gather(struct net *net, struct sk_buff *skb, u32 user) fq->q.meat == fq->q.len && nf_ct_frag6_reasm(fq, skb, dev)) ret = 0; + else + skb_dst_drop(skb); out_unlock: spin_unlock_bh(&fq->q.lock); -- cgit v1.2.3 From 35a88a18d7ea58600e11590405bc93b08e16e7f5 Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Mon, 9 Jul 2018 13:16:07 -0500 Subject: PCI: hv: Disable/enable IRQs rather than BH in hv_compose_msi_msg() Commit de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()") uses local_bh_disable()/enable(), because hv_pci_onchannelcallback() can also run in tasklet context as the channel event callback, so bottom halves should be disabled to prevent a race condition. With CONFIG_PROVE_LOCKING=y in the recent mainline, or old kernels that don't have commit f71b74bca637 ("irq/softirqs: Use lockdep to assert IRQs are disabled/enabled"), when the upper layer IRQ code calls hv_compose_msi_msg() with local IRQs disabled, we'll see a warning at the beginning of __local_bh_enable_ip(): IRQs not enabled as expected WARNING: CPU: 0 PID: 408 at kernel/softirq.c:162 __local_bh_enable_ip The warning exposes an issue in de0aa7b2f97d: local_bh_enable() can potentially call do_softirq(), which is not supposed to run when local IRQs are disabled. Let's fix this by using local_irq_save()/restore() instead. Note: hv_pci_onchannelcallback() is not a hot path because it's only called when the PCI device is hot added and removed, which is infrequent. Fixes: de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()") Signed-off-by: Dexuan Cui Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Haiyang Zhang Cc: stable@vger.kernel.org Cc: Stephen Hemminger Cc: K. Y. Srinivasan --- drivers/pci/controller/pci-hyperv.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index 6cc5036ac83c..f6325f1a89e8 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -1073,6 +1073,7 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) struct pci_bus *pbus; struct pci_dev *pdev; struct cpumask *dest; + unsigned long flags; struct compose_comp_ctxt comp; struct tran_int_desc *int_desc; struct { @@ -1164,14 +1165,15 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) * the channel callback directly when channel->target_cpu is * the current CPU. When the higher level interrupt code * calls us with interrupt enabled, let's add the - * local_bh_disable()/enable() to avoid race. + * local_irq_save()/restore() to avoid race: + * hv_pci_onchannelcallback() can also run in tasklet. */ - local_bh_disable(); + local_irq_save(flags); if (hbus->hdev->channel->target_cpu == smp_processor_id()) hv_pci_onchannelcallback(hbus); - local_bh_enable(); + local_irq_restore(flags); if (hpdev->state == hv_pcichild_ejecting) { dev_err_once(&hbus->hdev->device, -- cgit v1.2.3 From ec58ba16e174d7ca24c8955a21cd0a53e0c32fdf Mon Sep 17 00:00:00 2001 From: Gustavo Pimentel Date: Fri, 6 Jul 2018 11:32:37 +0100 Subject: ARC: [plat-hsdk]: Configure APB GPIO controller on ARC HSDK platform In case of HSDK we have intermediate INTC in for of DW APB GPIO controller which is used as a de-bounce logic for interrupt wires that come from outside the board. We cannot use existing "irq-dw-apb-ictl" driver here because all input lines are routed to corresponding output lines but not muxed into one line (this is configured in RTL and we cannot change this in software). But even if we add such a feature to "irq-dw-apb-ictl" driver that won't benefit us as higher-level INTC (in case of HSDK it is IDU) anyways has per-input control so adding fully-controller intermediate INTC will only bring some overhead on interrupt processing but no other benefits. Thus we just do one-time configuration of DW APB GPIO controller and forget about it. Based on implementation available on arch/arc/plat-axs10x/axs10x.c file. Acked-by: Alexey Brodkin Signed-off-by: Gustavo Pimentel Signed-off-by: Vineet Gupta --- arch/arc/plat-hsdk/platform.c | 62 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c index 2958aedb649a..2588b842407c 100644 --- a/arch/arc/plat-hsdk/platform.c +++ b/arch/arc/plat-hsdk/platform.c @@ -42,6 +42,66 @@ static void __init hsdk_init_per_cpu(unsigned int cpu) #define SDIO_UHS_REG_EXT (SDIO_BASE + 0x108) #define SDIO_UHS_REG_EXT_DIV_2 (2 << 30) +#define HSDK_GPIO_INTC (ARC_PERIPHERAL_BASE + 0x3000) + +static void __init hsdk_enable_gpio_intc_wire(void) +{ + /* + * Peripherals on CPU Card are wired to cpu intc via intermediate + * DW APB GPIO blocks (mainly for debouncing) + * + * --------------------- + * | snps,archs-intc | + * --------------------- + * | + * ---------------------- + * | snps,archs-idu-intc | + * ---------------------- + * | | | | | + * | [eth] [USB] [... other peripherals] + * | + * ------------------- + * | snps,dw-apb-intc | + * ------------------- + * | | | | + * [Bt] [HAPS] [... other peripherals] + * + * Current implementation of "irq-dw-apb-ictl" driver doesn't work well + * with stacked INTCs. In particular problem happens if its master INTC + * not yet instantiated. See discussion here - + * https://lkml.org/lkml/2015/3/4/755 + * + * So setup the first gpio block as a passive pass thru and hide it from + * DT hardware topology - connect intc directly to cpu intc + * The GPIO "wire" needs to be init nevertheless (here) + * + * One side adv is that peripheral interrupt handling avoids one nested + * intc ISR hop + * + * According to HSDK User's Manual [1], "Table 2 Interrupt Mapping" + * we have the following GPIO input lines used as sources of interrupt: + * - GPIO[0] - Bluetooth interrupt of RS9113 module + * - GPIO[2] - HAPS interrupt (on HapsTrak 3 connector) + * - GPIO[3] - Audio codec (MAX9880A) interrupt + * - GPIO[8-23] - Available on Arduino and PMOD_x headers + * For now there's no use of Arduino and PMOD_x headers in Linux + * use-case so we only enable lines 0, 2 and 3. + * + * [1] https://github.com/foss-for-synopsys-dwc-arc-processors/ARC-Development-Systems-Forum/wiki/docs/ARC_HSDK_User_Guide.pdf + */ +#define GPIO_INTEN (HSDK_GPIO_INTC + 0x30) +#define GPIO_INTMASK (HSDK_GPIO_INTC + 0x34) +#define GPIO_INTTYPE_LEVEL (HSDK_GPIO_INTC + 0x38) +#define GPIO_INT_POLARITY (HSDK_GPIO_INTC + 0x3c) +#define GPIO_INT_CONNECTED_MASK 0x0d + + iowrite32(0xffffffff, (void __iomem *) GPIO_INTMASK); + iowrite32(~GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTMASK); + iowrite32(0x00000000, (void __iomem *) GPIO_INTTYPE_LEVEL); + iowrite32(0xffffffff, (void __iomem *) GPIO_INT_POLARITY); + iowrite32(GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTEN); +} + static void __init hsdk_init_early(void) { /* @@ -62,6 +122,8 @@ static void __init hsdk_init_early(void) * minimum possible div-by-2. */ iowrite32(SDIO_UHS_REG_EXT_DIV_2, (void __iomem *) SDIO_UHS_REG_EXT); + + hsdk_enable_gpio_intc_wire(); } static const char *hsdk_compat[] __initconst = { -- cgit v1.2.3 From e8708786d4fe21c043d38d760f768949a3d71185 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 19 Jun 2018 17:22:05 +0300 Subject: ARC: Improve cmpxchg syscall implementation This is used in configs lacking hardware atomics to emulate atomic r-m-w for user space, implemented by disabling preemption in kernel. However there are issues in current implementation: 1. Process not terminated if invalid user pointer passed: i.e. __get_user() failed. 2. The reason for this patch was __put_user() failure not being handled either, specifically for the COW break scenario. The zero page is initially wired up and read from __get_user() succeeds. A subsequent write by __put_user() induces a Protection Violation, but COW can't finish as Linux page fault handler is disabled due to preempt disable. And what's worse is we silently return the stale value to user space. Fix this specific case by re-enabling preemption and explicitly fixing up the fault and retrying the whole sequence over. Cc: Max Filippov Cc: linux-arch@vger.kernel.org Signed-off-by: Alexey Brodkin Signed-off-by: Peter Zijlstra Signed-off-by: Vineet Gupta [vgupta: rewrote the changelog] --- arch/arc/kernel/process.c | 47 ++++++++++++++++++++++++++++++++++++----------- 1 file changed, 36 insertions(+), 11 deletions(-) diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c index 5ac3b547453f..4674541eba3f 100644 --- a/arch/arc/kernel/process.c +++ b/arch/arc/kernel/process.c @@ -47,7 +47,8 @@ SYSCALL_DEFINE0(arc_gettls) SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new) { struct pt_regs *regs = current_pt_regs(); - int uval = -EFAULT; + u32 uval; + int ret; /* * This is only for old cores lacking LLOCK/SCOND, which by defintion @@ -60,23 +61,47 @@ SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new) /* Z indicates to userspace if operation succeded */ regs->status32 &= ~STATUS_Z_MASK; - if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; + ret = access_ok(VERIFY_WRITE, uaddr, sizeof(*uaddr)); + if (!ret) + goto fail; +again: preempt_disable(); - if (__get_user(uval, uaddr)) - goto done; + ret = __get_user(uval, uaddr); + if (ret) + goto fault; - if (uval == expected) { - if (!__put_user(new, uaddr)) - regs->status32 |= STATUS_Z_MASK; - } + if (uval != expected) + goto out; -done: - preempt_enable(); + ret = __put_user(new, uaddr); + if (ret) + goto fault; + + regs->status32 |= STATUS_Z_MASK; +out: + preempt_enable(); return uval; + +fault: + preempt_enable(); + + if (unlikely(ret != -EFAULT)) + goto fail; + + down_read(¤t->mm->mmap_sem); + ret = fixup_user_fault(current, current->mm, (unsigned long) uaddr, + FAULT_FLAG_WRITE, NULL); + up_read(¤t->mm->mmap_sem); + + if (likely(!ret)) + goto again; + +fail: + force_sig(SIGSEGV, current); + return ret; } #ifdef CONFIG_ISA_ARCV2 -- cgit v1.2.3 From 29c2068fdaa51c89af31ea6b83dd1108b2349816 Mon Sep 17 00:00:00 2001 From: Anders Roxell Date: Tue, 26 Jun 2018 17:28:51 +0200 Subject: ARC: configs: remove no longer needed CONFIG_DEVPTS_MULTIPLE_INSTANCES Since commit eedf265aa003 ("devpts: Make each mount of devpts an independent filesystem.") CONFIG_DEVPTS_MULTIPLE_INSTANCES isn't needed in the defconfig anymore. Signed-off-by: Anders Roxell Signed-off-by: Vineet Gupta --- arch/arc/configs/tb10x_defconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig index 1aca2e8fd1ba..2cc87f909747 100644 --- a/arch/arc/configs/tb10x_defconfig +++ b/arch/arc/configs/tb10x_defconfig @@ -56,7 +56,6 @@ CONFIG_STMMAC_ETH=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set -CONFIG_DEVPTS_MULTIPLE_INSTANCES=y # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y -- cgit v1.2.3 From 64234961c145606b36eaa82c47b11be842b21049 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Wed, 6 Jun 2018 15:59:38 +0300 Subject: ARC: configs: Remove CONFIG_INITRAMFS_SOURCE from defconfigs We used to have pre-set CONFIG_INITRAMFS_SOURCE with local path to intramfs in ARC defconfigs. This was quite convenient for in-house development but not that convenient for newcomers who obviusly don't have folders like "arc_initramfs" next to the Linux source tree. Which leads to quite surprising failure of defconfig building: ------------------------------->8----------------------------- ../scripts/gen_initramfs_list.sh: Cannot open '../../arc_initramfs_hs/' ../usr/Makefile:57: recipe for target 'usr/initramfs_data.cpio.gz' failed make[2]: *** [usr/initramfs_data.cpio.gz] Error 1 ------------------------------->8----------------------------- So now when more and more people start to deal with our defconfigs let's make their life easier with removal of CONFIG_INITRAMFS_SOURCE. Signed-off-by: Alexey Brodkin Cc: Kevin Hilman Cc: stable@vger.kernel.org Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/configs/axs101_defconfig | 1 - arch/arc/configs/axs103_defconfig | 1 - arch/arc/configs/axs103_smp_defconfig | 1 - arch/arc/configs/haps_hs_defconfig | 1 - arch/arc/configs/haps_hs_smp_defconfig | 1 - arch/arc/configs/hsdk_defconfig | 1 - arch/arc/configs/nsim_700_defconfig | 1 - arch/arc/configs/nsim_hs_defconfig | 1 - arch/arc/configs/nsim_hs_smp_defconfig | 1 - arch/arc/configs/nsimosci_defconfig | 1 - arch/arc/configs/nsimosci_hs_defconfig | 1 - arch/arc/configs/nsimosci_hs_smp_defconfig | 1 - 12 files changed, 12 deletions(-) diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig index 09f85154c5a4..a635ea972304 100644 --- a/arch/arc/configs/axs101_defconfig +++ b/arch/arc/configs/axs101_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../arc_initramfs/" CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y # CONFIG_VM_EVENT_COUNTERS is not set diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig index 09fed3ef22b6..aa507e423075 100644 --- a/arch/arc/configs/axs103_defconfig +++ b/arch/arc/configs/axs103_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/" CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y # CONFIG_VM_EVENT_COUNTERS is not set diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig index ea2f6d817d1a..eba07f468654 100644 --- a/arch/arc/configs/axs103_smp_defconfig +++ b/arch/arc/configs/axs103_smp_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/" CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y # CONFIG_VM_EVENT_COUNTERS is not set diff --git a/arch/arc/configs/haps_hs_defconfig b/arch/arc/configs/haps_hs_defconfig index ab231c040efe..098b19fbaa51 100644 --- a/arch/arc/configs/haps_hs_defconfig +++ b/arch/arc/configs/haps_hs_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/" CONFIG_EXPERT=y CONFIG_PERF_EVENTS=y # CONFIG_COMPAT_BRK is not set diff --git a/arch/arc/configs/haps_hs_smp_defconfig b/arch/arc/configs/haps_hs_smp_defconfig index cf449cbf440d..0104c404d897 100644 --- a/arch/arc/configs/haps_hs_smp_defconfig +++ b/arch/arc/configs/haps_hs_smp_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/" CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y # CONFIG_VM_EVENT_COUNTERS is not set diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig index 1b54c72f4296..6491be0ddbc9 100644 --- a/arch/arc/configs/hsdk_defconfig +++ b/arch/arc/configs/hsdk_defconfig @@ -9,7 +9,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/" CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y # CONFIG_VM_EVENT_COUNTERS is not set diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig index 31c2c70b34a1..99e05cf63fca 100644 --- a/arch/arc/configs/nsim_700_defconfig +++ b/arch/arc/configs/nsim_700_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../arc_initramfs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y diff --git a/arch/arc/configs/nsim_hs_defconfig b/arch/arc/configs/nsim_hs_defconfig index a578c721d50f..0dc4f9b737e7 100644 --- a/arch/arc/configs/nsim_hs_defconfig +++ b/arch/arc/configs/nsim_hs_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y diff --git a/arch/arc/configs/nsim_hs_smp_defconfig b/arch/arc/configs/nsim_hs_smp_defconfig index 37d7395f3272..be3c30a15e54 100644 --- a/arch/arc/configs/nsim_hs_smp_defconfig +++ b/arch/arc/configs/nsim_hs_smp_defconfig @@ -9,7 +9,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig index 1e1470e2a7f0..3a74b9b21772 100644 --- a/arch/arc/configs/nsimosci_defconfig +++ b/arch/arc/configs/nsimosci_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../arc_initramfs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y diff --git a/arch/arc/configs/nsimosci_hs_defconfig b/arch/arc/configs/nsimosci_hs_defconfig index 084a6e42685b..ea2834b4dc1d 100644 --- a/arch/arc/configs/nsimosci_hs_defconfig +++ b/arch/arc/configs/nsimosci_hs_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y diff --git a/arch/arc/configs/nsimosci_hs_smp_defconfig b/arch/arc/configs/nsimosci_hs_smp_defconfig index f36d47990415..80a5a1b4924b 100644 --- a/arch/arc/configs/nsimosci_hs_smp_defconfig +++ b/arch/arc/configs/nsimosci_hs_smp_defconfig @@ -9,7 +9,6 @@ CONFIG_IKCONFIG_PROC=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/" CONFIG_PERF_EVENTS=y # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y -- cgit v1.2.3 From ca1147fc2487335e9d1d7a931996eae176863a4c Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 27 Jun 2018 16:00:32 -0700 Subject: ARC: [arcompact] entry.S: minor code movement This is a non functional code changw, which moves r25 restore from macro into the caller of macro Signed-off-by: Vineet Gupta --- arch/arc/include/asm/entry-compact.h | 6 ++++++ arch/arc/include/asm/entry.h | 3 --- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h index ec36d5b6d435..29f3988c9424 100644 --- a/arch/arc/include/asm/entry-compact.h +++ b/arch/arc/include/asm/entry-compact.h @@ -234,6 +234,9 @@ POP gp RESTORE_R12_TO_R0 +#ifdef CONFIG_ARC_CURR_IN_REG + ld r25, [sp, 12] +#endif ld sp, [sp] /* restore original sp */ /* orig_r0, ECR, user_r25 skipped automatically */ .endm @@ -315,6 +318,9 @@ POP gp RESTORE_R12_TO_R0 +#ifdef CONFIG_ARC_CURR_IN_REG + ld r25, [sp, 12] +#endif ld sp, [sp] /* restore original sp */ /* orig_r0, ECR, user_r25 skipped automatically */ .endm diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h index 51597f344a62..302b0db8ea2b 100644 --- a/arch/arc/include/asm/entry.h +++ b/arch/arc/include/asm/entry.h @@ -86,9 +86,6 @@ POP r1 POP r0 -#ifdef CONFIG_ARC_CURR_IN_REG - ld r25, [sp, 12] -#endif .endm /*-------------------------------------------------------------- -- cgit v1.2.3 From 6e3761145a9ba3ce267c330b6bff51cf6a057b06 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Thu, 28 Jun 2018 16:59:14 -0700 Subject: ARC: Fix CONFIG_SWAP swap was broken on ARC due to silly copy-paste issue. We encode offset from swapcache page in __swp_entry() as (off << 13) but were not decoding back in __swp_offset() as (off >> 13) - it was still (off << 13). This finally fixes swap usage on ARC. | # mkswap /dev/sda2 | | # swapon -a -e /dev/sda2 | Adding 500728k swap on /dev/sda2. Priority:-2 extents:1 across:500728k | | # free | total used free shared buffers cached | Mem: 765104 13456 751648 4736 8 4736 | -/+ buffers/cache: 8712 756392 | Swap: 500728 0 500728 Cc: stable@vger.kernel.org Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/include/asm/pgtable.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index 08fe33830d4b..77676e18da69 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -379,7 +379,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, /* Decode a PTE containing swap "identifier "into constituents */ #define __swp_type(pte_lookalike) (((pte_lookalike).val) & 0x1f) -#define __swp_offset(pte_lookalike) ((pte_lookalike).val << 13) +#define __swp_offset(pte_lookalike) ((pte_lookalike).val >> 13) /* NOPs, to keep generic kernel happy */ #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -- cgit v1.2.3 From a83a2173441698f7ac9867b93bcca21cf18a032d Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Mon, 9 Jul 2018 15:18:56 -0500 Subject: PCI: endpoint: Fix NULL pointer dereference error when CONFIGFS is disabled commit ef1433f717a2 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry") while adding configfs entry for each pci_epf_device_id table entry introduced a NULL pointer dereference error when CONFIG_PCI_ENDPOINT_CONFIGFS is not enabled. Fix it here. Fixes: ef1433f717a2 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry") Signed-off-by: Kishon Vijay Abraham I [lorenzo.pieralisi: updated commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas --- drivers/pci/endpoint/pci-epf-core.c | 62 +++++++++++++++++++++++++------------ 1 file changed, 43 insertions(+), 19 deletions(-) diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c index bf53fad636a5..825fa24427a3 100644 --- a/drivers/pci/endpoint/pci-epf-core.c +++ b/drivers/pci/endpoint/pci-epf-core.c @@ -137,25 +137,60 @@ void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar) } EXPORT_SYMBOL_GPL(pci_epf_alloc_space); -/** - * pci_epf_unregister_driver() - unregister the PCI EPF driver - * @driver: the PCI EPF driver that has to be unregistered - * - * Invoke to unregister the PCI EPF driver. - */ -void pci_epf_unregister_driver(struct pci_epf_driver *driver) +static void pci_epf_remove_cfs(struct pci_epf_driver *driver) { struct config_group *group, *tmp; + if (!IS_ENABLED(CONFIG_PCI_ENDPOINT_CONFIGFS)) + return; + mutex_lock(&pci_epf_mutex); list_for_each_entry_safe(group, tmp, &driver->epf_group, group_entry) pci_ep_cfs_remove_epf_group(group); list_del(&driver->epf_group); mutex_unlock(&pci_epf_mutex); +} + +/** + * pci_epf_unregister_driver() - unregister the PCI EPF driver + * @driver: the PCI EPF driver that has to be unregistered + * + * Invoke to unregister the PCI EPF driver. + */ +void pci_epf_unregister_driver(struct pci_epf_driver *driver) +{ + pci_epf_remove_cfs(driver); driver_unregister(&driver->driver); } EXPORT_SYMBOL_GPL(pci_epf_unregister_driver); +static int pci_epf_add_cfs(struct pci_epf_driver *driver) +{ + struct config_group *group; + const struct pci_epf_device_id *id; + + if (!IS_ENABLED(CONFIG_PCI_ENDPOINT_CONFIGFS)) + return 0; + + INIT_LIST_HEAD(&driver->epf_group); + + id = driver->id_table; + while (id->name[0]) { + group = pci_ep_cfs_add_epf_group(id->name); + if (IS_ERR(group)) { + pci_epf_remove_cfs(driver); + return PTR_ERR(group); + } + + mutex_lock(&pci_epf_mutex); + list_add_tail(&group->group_entry, &driver->epf_group); + mutex_unlock(&pci_epf_mutex); + id++; + } + + return 0; +} + /** * __pci_epf_register_driver() - register a new PCI EPF driver * @driver: structure representing PCI EPF driver @@ -167,8 +202,6 @@ int __pci_epf_register_driver(struct pci_epf_driver *driver, struct module *owner) { int ret; - struct config_group *group; - const struct pci_epf_device_id *id; if (!driver->ops) return -EINVAL; @@ -183,16 +216,7 @@ int __pci_epf_register_driver(struct pci_epf_driver *driver, if (ret) return ret; - INIT_LIST_HEAD(&driver->epf_group); - - id = driver->id_table; - while (id->name[0]) { - group = pci_ep_cfs_add_epf_group(id->name); - mutex_lock(&pci_epf_mutex); - list_add_tail(&group->group_entry, &driver->epf_group); - mutex_unlock(&pci_epf_mutex); - id++; - } + pci_epf_add_cfs(driver); return 0; } -- cgit v1.2.3 From 96a85cc517a9ee4ae5e8d7f5a36cba05023784eb Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Thu, 14 Jun 2018 20:56:25 +0300 Subject: drm/i915: Fix hotplug irq ack on i965/g4x MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Just like with PIPESTAT, the edge triggered IIR on i965/g4x also causes problems for hotplug interrupts. To make sure we don't get the IIR port interrupt bit stuck low with the ISR bit high we must force an edge in ISR. Unfortunately we can't borrow the PIPESTAT trick and toggle the enable bits in PORT_HOTPLUG_EN as that act itself generates hotplug interrupts. Instead we just have to loop until we've cleared PORT_HOTPLUG_STAT, or we just give up and WARN. v2: Don't frob with PORT_HOTPLUG_EN Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20180614175625.1615-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak (cherry picked from commit 0ba7c51a6fd80a89236f6ceb52e63f8a7f62bfd3) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/i915_irq.c | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 4a02747ac658..c16cb025755e 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1998,10 +1998,38 @@ static void valleyview_pipestat_irq_handler(struct drm_i915_private *dev_priv, static u32 i9xx_hpd_irq_ack(struct drm_i915_private *dev_priv) { - u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT); + u32 hotplug_status = 0, hotplug_status_mask; + int i; + + if (IS_G4X(dev_priv) || + IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) + hotplug_status_mask = HOTPLUG_INT_STATUS_G4X | + DP_AUX_CHANNEL_MASK_INT_STATUS_G4X; + else + hotplug_status_mask = HOTPLUG_INT_STATUS_I915; - if (hotplug_status) + /* + * We absolutely have to clear all the pending interrupt + * bits in PORT_HOTPLUG_STAT. Otherwise the ISR port + * interrupt bit won't have an edge, and the i965/g4x + * edge triggered IIR will not notice that an interrupt + * is still pending. We can't use PORT_HOTPLUG_EN to + * guarantee the edge as the act of toggling the enable + * bits can itself generate a new hotplug interrupt :( + */ + for (i = 0; i < 10; i++) { + u32 tmp = I915_READ(PORT_HOTPLUG_STAT) & hotplug_status_mask; + + if (tmp == 0) + return hotplug_status; + + hotplug_status |= tmp; I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status); + } + + WARN_ONCE(1, + "PORT_HOTPLUG_STAT did not clear (0x%08x)\n", + I915_READ(PORT_HOTPLUG_STAT)); return hotplug_status; } -- cgit v1.2.3 From 54836e2d03e76d80aec3399368ffaf5b7caadd1b Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Tue, 3 Jul 2018 09:55:43 +0100 Subject: i2c: tegra: Fix NACK error handling On Tegra30 Cardhu the PCA9546 I2C mux is not ACK'ing I2C commands on resume from suspend (which is caused by the reset signal for the I2C mux not being configured correctl). However, this NACK is causing the Tegra30 to hang on resuming from suspend which is not expected as we detect NACKs and handle them. The hang observed appears to occur when resetting the I2C controller to recover from the NACK. Commit 77821b4678f9 ("i2c: tegra: proper handling of error cases") added additional error handling for some error cases including NACK, however, it appears that this change conflicts with an early fix by commit f70893d08338 ("i2c: tegra: Add delay before resetting the controller after NACK"). After commit 77821b4678f9 was made we now disable 'packet mode' before the delay from commit f70893d08338 happens. Testing shows that moving the delay to before disabling 'packet mode' fixes the hang observed on Tegra30. The delay was added to give the I2C controller chance to send a stop condition and so it makes sense to move this to before we disable packet mode. Please note that packet mode is always enabled for Tegra. Fixes: 77821b4678f9 ("i2c: tegra: proper handling of error cases") Signed-off-by: Jon Hunter Acked-by: Thierry Reding Signed-off-by: Wolfram Sang Cc: stable@vger.kernel.org --- drivers/i2c/busses/i2c-tegra.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 5fccd1f1bca8..797def5319f1 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -545,6 +545,14 @@ static int tegra_i2c_disable_packet_mode(struct tegra_i2c_dev *i2c_dev) { u32 cnfg; + /* + * NACK interrupt is generated before the I2C controller generates + * the STOP condition on the bus. So wait for 2 clock periods + * before disabling the controller so that the STOP condition has + * been delivered properly. + */ + udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate)); + cnfg = i2c_readl(i2c_dev, I2C_CNFG); if (cnfg & I2C_CNFG_PACKET_MODE_EN) i2c_writel(i2c_dev, cnfg & ~I2C_CNFG_PACKET_MODE_EN, I2C_CNFG); @@ -706,15 +714,6 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, if (likely(i2c_dev->msg_err == I2C_ERR_NONE)) return 0; - /* - * NACK interrupt is generated before the I2C controller generates - * the STOP condition on the bus. So wait for 2 clock periods - * before resetting the controller so that the STOP condition has - * been delivered properly. - */ - if (i2c_dev->msg_err == I2C_ERR_NO_ACK) - udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate)); - tegra_i2c_init(i2c_dev); if (i2c_dev->msg_err == I2C_ERR_NO_ACK) { if (msg->flags & I2C_M_IGNORE_NAK) -- cgit v1.2.3 From e32d4e60b350124065e0ffd9c91ac13a439aee9a Mon Sep 17 00:00:00 2001 From: Venkat Duvvuru Date: Mon, 9 Jul 2018 02:24:47 -0400 Subject: bnxt_en: Fix the vlan_tci exact match check. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It is possible that OVS may set don’t care for DEI/CFI bit in vlan_tci mask. Hence, checking for vlan_tci exact match will endup in a vlan flow rejection. This patch fixes the problem by checking for vlan_pcp and vid separately, instead of checking for the entire vlan_tci. Fixes: e85a9be93cf1 (bnxt_en: do not allow wildcard matches for L2 flows) Signed-off-by: Venkat Duvvuru Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c | 30 +++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c index 795f45024c20..491bd40a254d 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c @@ -27,6 +27,15 @@ #define BNXT_FID_INVALID 0xffff #define VLAN_TCI(vid, prio) ((vid) | ((prio) << VLAN_PRIO_SHIFT)) +#define is_vlan_pcp_wildcarded(vlan_tci_mask) \ + ((ntohs(vlan_tci_mask) & VLAN_PRIO_MASK) == 0x0000) +#define is_vlan_pcp_exactmatch(vlan_tci_mask) \ + ((ntohs(vlan_tci_mask) & VLAN_PRIO_MASK) == VLAN_PRIO_MASK) +#define is_vlan_pcp_zero(vlan_tci) \ + ((ntohs(vlan_tci) & VLAN_PRIO_MASK) == 0x0000) +#define is_vid_exactmatch(vlan_tci_mask) \ + ((ntohs(vlan_tci_mask) & VLAN_VID_MASK) == VLAN_VID_MASK) + /* Return the dst fid of the func for flow forwarding * For PFs: src_fid is the fid of the PF * For VF-reps: src_fid the fid of the VF @@ -389,6 +398,21 @@ static bool is_exactmatch(void *mask, int len) return true; } +static bool is_vlan_tci_allowed(__be16 vlan_tci_mask, + __be16 vlan_tci) +{ + /* VLAN priority must be either exactly zero or fully wildcarded and + * VLAN id must be exact match. + */ + if (is_vid_exactmatch(vlan_tci_mask) && + ((is_vlan_pcp_exactmatch(vlan_tci_mask) && + is_vlan_pcp_zero(vlan_tci)) || + is_vlan_pcp_wildcarded(vlan_tci_mask))) + return true; + + return false; +} + static bool bits_set(void *key, int len) { const u8 *p = key; @@ -803,9 +827,9 @@ static bool bnxt_tc_can_offload(struct bnxt *bp, struct bnxt_tc_flow *flow) /* Currently VLAN fields cannot be partial wildcard */ if (bits_set(&flow->l2_key.inner_vlan_tci, sizeof(flow->l2_key.inner_vlan_tci)) && - !is_exactmatch(&flow->l2_mask.inner_vlan_tci, - sizeof(flow->l2_mask.inner_vlan_tci))) { - netdev_info(bp->dev, "Wildcard match unsupported for VLAN TCI\n"); + !is_vlan_tci_allowed(flow->l2_mask.inner_vlan_tci, + flow->l2_key.inner_vlan_tci)) { + netdev_info(bp->dev, "Unsupported VLAN TCI\n"); return false; } if (bits_set(&flow->l2_key.inner_vlan_tpid, -- cgit v1.2.3 From 07f4fde53d12eb8d921b465bb298e964e0bdc38c Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 9 Jul 2018 02:24:48 -0400 Subject: bnxt_en: Fix inconsistent BNXT_FLAG_AGG_RINGS logic. If there aren't enough RX rings available, the driver will attempt to use a single RX ring without the aggregation ring. If that also fails, the BNXT_FLAG_AGG_RINGS flag is cleared but the other ring parameters are not set consistently to reflect that. If more RX rings become available at the next open, the RX rings will be in an inconsistent state and may crash when freeing the RX rings. Fix it by restoring the BNXT_FLAG_AGG_RINGS if not enough RX rings are available to run without aggregation rings. Fixes: bdbd1eb59c56 ("bnxt_en: Handle no aggregation ring gracefully.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 176fc9f4d7de..5d95d788737f 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -8520,8 +8520,11 @@ static int bnxt_get_dflt_rings(struct bnxt *bp, int *max_rx, int *max_tx, /* Not enough rings, try disabling agg rings. */ bp->flags &= ~BNXT_FLAG_AGG_RINGS; rc = bnxt_get_max_rings(bp, max_rx, max_tx, shared); - if (rc) + if (rc) { + /* set BNXT_FLAG_AGG_RINGS back for consistency */ + bp->flags |= BNXT_FLAG_AGG_RINGS; return rc; + } bp->flags |= BNXT_FLAG_NO_AGG_RINGS; bp->dev->hw_features &= ~(NETIF_F_LRO | NETIF_F_GRO_HW); bp->dev->features &= ~(NETIF_F_LRO | NETIF_F_GRO_HW); -- cgit v1.2.3 From 78f058a4aa0f2280dc4d45d2c4a95728398ef857 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 9 Jul 2018 02:24:49 -0400 Subject: bnxt_en: Always set output parameters in bnxt_get_max_rings(). The current code returns -ENOMEM and does not bother to set the output parameters to 0 when no rings are available. Some callers, such as bnxt_get_channels() will display garbage ring numbers when that happens. Fix it by always setting the output parameters. Fixes: 6e6c5a57fbe1 ("bnxt_en: Modify bnxt_get_max_rings() to support shared or non shared rings.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 5d95d788737f..5a47607aba53 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -8502,11 +8502,11 @@ int bnxt_get_max_rings(struct bnxt *bp, int *max_rx, int *max_tx, bool shared) int rx, tx, cp; _bnxt_get_max_rings(bp, &rx, &tx, &cp); + *max_rx = rx; + *max_tx = tx; if (!rx || !tx || !cp) return -ENOMEM; - *max_rx = rx; - *max_tx = tx; return bnxt_trim_rings(bp, max_rx, max_tx, cp, shared); } -- cgit v1.2.3 From 30e338487a476aff2f12f440d1190a71c245b99c Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 9 Jul 2018 02:24:50 -0400 Subject: bnxt_en: Support clearing of the IFF_BROADCAST flag. Currently, the driver assumes IFF_BROADCAST is always set and always sets the broadcast filter. Modify the code to set or clear the broadcast filter according to the IFF_BROADCAST flag. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 5a47607aba53..fac1285d2535 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -5712,7 +5712,9 @@ static int bnxt_init_chip(struct bnxt *bp, bool irq_re_init) } vnic->uc_filter_count = 1; - vnic->rx_mask = CFA_L2_SET_RX_MASK_REQ_MASK_BCAST; + vnic->rx_mask = 0; + if (bp->dev->flags & IFF_BROADCAST) + vnic->rx_mask |= CFA_L2_SET_RX_MASK_REQ_MASK_BCAST; if ((bp->dev->flags & IFF_PROMISC) && bnxt_promisc_ok(bp)) vnic->rx_mask |= CFA_L2_SET_RX_MASK_REQ_MASK_PROMISCUOUS; @@ -7214,13 +7216,16 @@ static void bnxt_set_rx_mode(struct net_device *dev) mask &= ~(CFA_L2_SET_RX_MASK_REQ_MASK_PROMISCUOUS | CFA_L2_SET_RX_MASK_REQ_MASK_MCAST | - CFA_L2_SET_RX_MASK_REQ_MASK_ALL_MCAST); + CFA_L2_SET_RX_MASK_REQ_MASK_ALL_MCAST | + CFA_L2_SET_RX_MASK_REQ_MASK_BCAST); if ((dev->flags & IFF_PROMISC) && bnxt_promisc_ok(bp)) mask |= CFA_L2_SET_RX_MASK_REQ_MASK_PROMISCUOUS; uc_update = bnxt_uc_list_updated(bp); + if (dev->flags & IFF_BROADCAST) + mask |= CFA_L2_SET_RX_MASK_REQ_MASK_BCAST; if (dev->flags & IFF_ALLMULTI) { mask |= CFA_L2_SET_RX_MASK_REQ_MASK_ALL_MCAST; vnic->mc_list_count = 0; -- cgit v1.2.3 From 30f529473ec962102e8bcd33a6a04f1e1b490ae2 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 9 Jul 2018 02:24:51 -0400 Subject: bnxt_en: Do not modify max IRQ count after RDMA driver requests/frees IRQs. Calling bnxt_set_max_func_irqs() to modify the max IRQ count requested or freed by the RDMA driver is flawed. The max IRQ count is checked when re-initializing the IRQ vectors and this can happen multiple times during ifup or ethtool -L. If the max IRQ is reduced and the RDMA driver is operational, we may not initailize IRQs correctly. This problem shows up on VFs with very small number of MSIX. There is no other logic that relies on the IRQ count excluding the ones used by RDMA. So we fix it by just removing the call to subtract or add the IRQs used by RDMA. Fixes: a588e4580a7e ("bnxt_en: Add interface to support RDMA driver.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 - drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c | 2 -- 3 files changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index fac1285d2535..11b21ad0a672 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -5919,7 +5919,7 @@ unsigned int bnxt_get_max_func_irqs(struct bnxt *bp) return min_t(unsigned int, hw_resc->max_irqs, hw_resc->max_cp_rings); } -void bnxt_set_max_func_irqs(struct bnxt *bp, unsigned int max_irqs) +static void bnxt_set_max_func_irqs(struct bnxt *bp, unsigned int max_irqs) { bp->hw_resc.max_irqs = max_irqs; } diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index 9b14eb610b9f..91575ef97c8c 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -1470,7 +1470,6 @@ void bnxt_set_max_func_stat_ctxs(struct bnxt *bp, unsigned int max); unsigned int bnxt_get_max_func_cp_rings(struct bnxt *bp); void bnxt_set_max_func_cp_rings(struct bnxt *bp, unsigned int max); unsigned int bnxt_get_max_func_irqs(struct bnxt *bp); -void bnxt_set_max_func_irqs(struct bnxt *bp, unsigned int max); int bnxt_get_avail_msix(struct bnxt *bp, int num); int bnxt_reserve_rings(struct bnxt *bp); void bnxt_tx_disable(struct bnxt *bp); diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c index 347e4f946eb2..840f6e505f73 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c @@ -169,7 +169,6 @@ static int bnxt_req_msix_vecs(struct bnxt_en_dev *edev, int ulp_id, edev->ulp_tbl[ulp_id].msix_requested = avail_msix; } bnxt_fill_msix_vecs(bp, ent); - bnxt_set_max_func_irqs(bp, bnxt_get_max_func_irqs(bp) - avail_msix); bnxt_set_max_func_cp_rings(bp, max_cp_rings - avail_msix); edev->flags |= BNXT_EN_FLAG_MSIX_REQUESTED; return avail_msix; @@ -192,7 +191,6 @@ static int bnxt_free_msix_vecs(struct bnxt_en_dev *edev, int ulp_id) msix_requested = edev->ulp_tbl[ulp_id].msix_requested; bnxt_set_max_func_cp_rings(bp, max_cp_rings + msix_requested); edev->ulp_tbl[ulp_id].msix_requested = 0; - bnxt_set_max_func_irqs(bp, bnxt_get_max_func_irqs(bp) + msix_requested); edev->flags &= ~BNXT_EN_FLAG_MSIX_REQUESTED; if (netif_running(dev)) { bnxt_close_nic(bp, true, false); -- cgit v1.2.3 From c58387ab1614f6d7fb9e244f214b61e7631421fc Mon Sep 17 00:00:00 2001 From: Vikas Gupta Date: Mon, 9 Jul 2018 02:24:52 -0400 Subject: bnxt_en: Fix for system hang if request_irq fails Fix bug in the error code path when bnxt_request_irq() returns failure. bnxt_disable_napi() should not be called in this error path because NAPI has not been enabled yet. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Vikas Gupta Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 11b21ad0a672..4394c1162be4 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -6890,7 +6890,7 @@ static int __bnxt_open_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init) rc = bnxt_request_irq(bp); if (rc) { netdev_err(bp->dev, "bnxt_request_irq err: %x\n", rc); - goto open_err; + goto open_err_irq; } } @@ -6930,6 +6930,8 @@ static int __bnxt_open_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init) open_err: bnxt_debug_dev_exit(bp); bnxt_disable_napi(bp); + +open_err_irq: bnxt_del_napi(bp); open_err_free_mem: -- cgit v1.2.3 From 0026129c8629265bfe5079c1e017fa8543796d9f Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Sun, 8 Jul 2018 11:55:51 +0900 Subject: rhashtable: add restart routine in rhashtable_free_and_destroy() rhashtable_free_and_destroy() cancels re-hash deferred work then walks and destroys elements. at this moment, some elements can be still in future_tbl. that elements are not destroyed. test case: nft_rhash_destroy() calls rhashtable_free_and_destroy() to destroy all elements of sets before destroying sets and chains. But rhashtable_free_and_destroy() doesn't destroy elements of future_tbl. so that splat occurred. test script: %cat test.nft table ip aa { map map1 { type ipv4_addr : verdict; elements = { 0 : jump a0, 1 : jump a0, 2 : jump a0, 3 : jump a0, 4 : jump a0, 5 : jump a0, 6 : jump a0, 7 : jump a0, 8 : jump a0, 9 : jump a0, } } chain a0 { } } flush ruleset table ip aa { map map1 { type ipv4_addr : verdict; elements = { 0 : jump a0, 1 : jump a0, 2 : jump a0, 3 : jump a0, 4 : jump a0, 5 : jump a0, 6 : jump a0, 7 : jump a0, 8 : jump a0, 9 : jump a0, } } chain a0 { } } flush ruleset %while :; do nft -f test.nft; done Splat looks like: [ 200.795603] kernel BUG at net/netfilter/nf_tables_api.c:1363! [ 200.806944] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 200.812253] CPU: 1 PID: 1582 Comm: nft Not tainted 4.17.0+ #24 [ 200.820297] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [ 200.830309] RIP: 0010:nf_tables_chain_destroy.isra.34+0x62/0x240 [nf_tables] [ 200.838317] Code: 43 50 85 c0 74 26 48 8b 45 00 48 8b 4d 08 ba 54 05 00 00 48 c7 c6 60 6d 29 c0 48 c7 c7 c0 65 29 c0 4c 8b 40 08 e8 58 e5 fd f8 <0f> 0b 48 89 da 48 b8 00 00 00 00 00 fc ff [ 200.860366] RSP: 0000:ffff880118dbf4d0 EFLAGS: 00010282 [ 200.866354] RAX: 0000000000000061 RBX: ffff88010cdeaf08 RCX: 0000000000000000 [ 200.874355] RDX: 0000000000000061 RSI: 0000000000000008 RDI: ffffed00231b7e90 [ 200.882361] RBP: ffff880118dbf4e8 R08: ffffed002373bcfb R09: ffffed002373bcfa [ 200.890354] R10: 0000000000000000 R11: ffffed002373bcfb R12: dead000000000200 [ 200.898356] R13: dead000000000100 R14: ffffffffbb62af38 R15: dffffc0000000000 [ 200.906354] FS: 00007fefc31fd700(0000) GS:ffff88011b800000(0000) knlGS:0000000000000000 [ 200.915533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.922355] CR2: 0000557f1c8e9128 CR3: 0000000106880000 CR4: 00000000001006e0 [ 200.930353] Call Trace: [ 200.932351] ? nf_tables_commit+0x26f6/0x2c60 [nf_tables] [ 200.939525] ? nf_tables_setelem_notify.constprop.49+0x1a0/0x1a0 [nf_tables] [ 200.947525] ? nf_tables_delchain+0x6e0/0x6e0 [nf_tables] [ 200.952383] ? nft_add_set_elem+0x1700/0x1700 [nf_tables] [ 200.959532] ? nla_parse+0xab/0x230 [ 200.963529] ? nfnetlink_rcv_batch+0xd06/0x10d0 [nfnetlink] [ 200.968384] ? nfnetlink_net_init+0x130/0x130 [nfnetlink] [ 200.975525] ? debug_show_all_locks+0x290/0x290 [ 200.980363] ? debug_show_all_locks+0x290/0x290 [ 200.986356] ? sched_clock_cpu+0x132/0x170 [ 200.990352] ? find_held_lock+0x39/0x1b0 [ 200.994355] ? sched_clock_local+0x10d/0x130 [ 200.999531] ? memset+0x1f/0x40 V2: - free all tables requested by Herbert Xu Signed-off-by: Taehee Yoo Acked-by: Herbert Xu Signed-off-by: David S. Miller --- lib/rhashtable.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/lib/rhashtable.c b/lib/rhashtable.c index 3109b2e1d552..0183d07a9b4d 100644 --- a/lib/rhashtable.c +++ b/lib/rhashtable.c @@ -1143,13 +1143,14 @@ void rhashtable_free_and_destroy(struct rhashtable *ht, void (*free_fn)(void *ptr, void *arg), void *arg) { - struct bucket_table *tbl; + struct bucket_table *tbl, *next_tbl; unsigned int i; cancel_work_sync(&ht->run_work); mutex_lock(&ht->mutex); tbl = rht_dereference(ht->tbl, ht); +restart: if (free_fn) { for (i = 0; i < tbl->size; i++) { struct rhash_head *pos, *next; @@ -1166,7 +1167,12 @@ void rhashtable_free_and_destroy(struct rhashtable *ht, } } + next_tbl = rht_dereference(tbl->future_tbl, ht); bucket_table_free(tbl); + if (next_tbl) { + tbl = next_tbl; + goto restart; + } mutex_unlock(&ht->mutex); } EXPORT_SYMBOL_GPL(rhashtable_free_and_destroy); -- cgit v1.2.3 From bdf33113d89f70186ffb6674e925fa9b8a0266b1 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 9 Jul 2018 13:15:32 +0100 Subject: Update TDA998x maintainer entry Update my TDA998x HDMI encoder MAINTAINERS entry to include the dt-bindings header, and a keyword pattern to catch patches containing the DT compatible. Also change the status to "maintained" rather than "supported". Signed-off-by: Russell King Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 96e98e206b0d..19f2d12ace6b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10213,11 +10213,13 @@ F: sound/soc/codecs/sgtl5000* NXP TDA998X DRM DRIVER M: Russell King -S: Supported +S: Maintained T: git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-tda998x-devel T: git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-tda998x-fixes F: drivers/gpu/drm/i2c/tda998x_drv.c F: include/drm/i2c/tda998x.h +F: include/dt-bindings/display/tda998x.h +K: "nxp,tda998x" NXP TFA9879 DRIVER M: Peter Rosin -- cgit v1.2.3 From dc81aab1be9fac2e11f31fe7538a50705eba08cf Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 6 Jul 2018 09:28:42 +0200 Subject: MAINTAINERS: update drm tree Mail to dri-devel went out, linux-next was updated, but we forgot this one here. Cc: David Airlie Signed-off-by: Daniel Vetter Acked-by: Alex Deucher Acked-by: Rodrigo Vivi Signed-off-by: Dave Airlie Link: https://patchwork.freedesktop.org/patch/msgid/20180706072842.9009-1-daniel.vetter@ffwll.ch --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 96e98e206b0d..ad0753fb5357 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -581,7 +581,7 @@ W: https://www.infradead.org/~dhowells/kafs/ AGPGART DRIVER M: David Airlie -T: git git://people.freedesktop.org/~airlied/linux (part of drm maint) +T: git git://anongit.freedesktop.org/drm/drm S: Maintained F: drivers/char/agp/ F: include/linux/agp* @@ -4630,7 +4630,7 @@ F: include/uapi/drm/vmwgfx_drm.h DRM DRIVERS M: David Airlie L: dri-devel@lists.freedesktop.org -T: git git://people.freedesktop.org/~airlied/linux +T: git git://anongit.freedesktop.org/drm/drm B: https://bugs.freedesktop.org/ C: irc://chat.freenode.net/dri-devel S: Maintained -- cgit v1.2.3 From 8fb8876b2d1432b352c96add3adefa28d2754672 Mon Sep 17 00:00:00 2001 From: Souptick Joarder Date: Mon, 21 May 2018 23:47:04 +0530 Subject: char: agp: Change return type to vm_fault_t Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Ref-> commit 1c8f422059ae ("mm: change return type to vm_fault_t") was added in 4.17-rc1 to introduce the new typedef vm_fault_t. Currently we are making change to all drivers to return vm_fault_t for page fault handlers. As part of that char/agp driver is also getting changed to return vm_fault_t type from fault handler. Signed-off-by: Souptick Joarder Reviewed-by: Matthew Wilcox Signed-off-by: Dave Airlie --- drivers/char/agp/alpha-agp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/agp/alpha-agp.c b/drivers/char/agp/alpha-agp.c index 53fe633df1e8..c9bf2c219841 100644 --- a/drivers/char/agp/alpha-agp.c +++ b/drivers/char/agp/alpha-agp.c @@ -11,7 +11,7 @@ #include "agp.h" -static int alpha_core_agp_vm_fault(struct vm_fault *vmf) +static vm_fault_t alpha_core_agp_vm_fault(struct vm_fault *vmf) { alpha_agp_info *agp = agp_bridge->dev_private_data; dma_addr_t dma_addr; -- cgit v1.2.3 From 572d8fda26fecbb6bbb63e917b5610c7157cde96 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 4 Jul 2018 17:20:41 -0500 Subject: char: amd64-agp: Use 64-bit arithmetic instead of 32-bit Cast *tmp* and *nb_base* to u64 in order to give the compiler complete information about the proper arithmetic to use. Notice that such variables are used in contexts that expect expressions of type u64 (64 bits, unsigned) and the following expressions are currently being evaluated using 32-bit arithmetic: tmp << 25 nb_base << 25 Addresses-Coverity-ID: 200586 ("Unintentional integer overflow") Addresses-Coverity-ID: 200587 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Dave Airlie --- drivers/char/agp/amd64-agp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index e50c29c97ca7..c69e39fdd02b 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -156,7 +156,7 @@ static u64 amd64_configure(struct pci_dev *hammer, u64 gatt_table) /* Address to map to */ pci_read_config_dword(hammer, AMD64_GARTAPERTUREBASE, &tmp); - aperturebase = tmp << 25; + aperturebase = (u64)tmp << 25; aper_base = (aperturebase & PCI_BASE_ADDRESS_MEM_MASK); enable_gart_translation(hammer, gatt_table); @@ -277,7 +277,7 @@ static int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp, u16 cap) pci_read_config_dword(nb, AMD64_GARTAPERTURECTL, &nb_order); nb_order = (nb_order >> 1) & 7; pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base); - nb_aper = nb_base << 25; + nb_aper = (u64)nb_base << 25; /* Northbridge seems to contain crap. Try the AGP bridge. */ -- cgit v1.2.3 From b9626f45abccd044f8048269c67720f0719f2d4e Mon Sep 17 00:00:00 2001 From: Taeung Song Date: Tue, 10 Jul 2018 02:51:21 +0900 Subject: samples/bpf: Fix tc and ip paths in xdp2skb_meta.sh The below path error can occur: # ./xdp2skb_meta.sh --dev eth0 --list ./xdp2skb_meta.sh: line 61: /usr/sbin/tc: No such file or directory So just use command names instead of absolute paths of tc and ip. In addition, it allow callers to redefine $TC and $IP paths Fixes: 36e04a2d78d9 ("samples/bpf: xdp2skb_meta shows transferring info from XDP to SKB") Reviewed-by: Jesper Dangaard Brouer Signed-off-by: Taeung Song Acked-by: Jesper Dangaard Brouer Signed-off-by: Daniel Borkmann --- samples/bpf/xdp2skb_meta.sh | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/samples/bpf/xdp2skb_meta.sh b/samples/bpf/xdp2skb_meta.sh index b9c9549c4c27..4bde9d066c46 100755 --- a/samples/bpf/xdp2skb_meta.sh +++ b/samples/bpf/xdp2skb_meta.sh @@ -16,8 +16,8 @@ BPF_FILE=xdp2skb_meta_kern.o DIR=$(dirname $0) -export TC=/usr/sbin/tc -export IP=/usr/sbin/ip +[ -z "$TC" ] && TC=tc +[ -z "$IP" ] && IP=ip function usage() { echo "" @@ -53,7 +53,7 @@ function _call_cmd() { local allow_fail="$2" shift 2 if [[ -n "$VERBOSE" ]]; then - echo "$(basename $cmd) $@" + echo "$cmd $@" fi if [[ -n "$DRYRUN" ]]; then return -- cgit v1.2.3 From 96f95a17c1cfe65a002e525114d96616e91a8f2d Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Mon, 9 Jul 2018 13:09:56 -0700 Subject: Revert "arm64: Use aarch64elf and aarch64elfb emulation mode variants" This reverts commit 38fc4248677552ce35efc09902fdcb06b61d7ef9. Distributions such as Fedora and Debian do not package the ELF linker scripts with their toolchains, resulting in kernel build failures such as: | CHK include/generated/compile.h | LD [M] arch/arm64/crypto/sha512-ce.o | aarch64-linux-gnu-ld: cannot open linker script file ldscripts/aarch64elf.xr: No such file or directory | make[1]: *** [scripts/Makefile.build:530: arch/arm64/crypto/sha512-ce.o] Error 1 | make: *** [Makefile:1029: arch/arm64/crypto] Error 2 Revert back to the linux targets for now, adding a comment to the Makefile so we don't accidentally break this in the future. Cc: Paul Kocialkowski Cc: Fixes: 38fc42486775 ("arm64: Use aarch64elf and aarch64elfb emulation mode variants") Tested-by: Kevin Hilman Signed-off-by: Laura Abbott Signed-off-by: Will Deacon --- arch/arm64/Makefile | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 7976d2d242fa..e7101b19d590 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -60,13 +60,15 @@ ifeq ($(CONFIG_CPU_BIG_ENDIAN), y) KBUILD_CPPFLAGS += -mbig-endian CHECKFLAGS += -D__AARCH64EB__ AS += -EB -LDFLAGS += -EB -maarch64elfb +# We must use the linux target here, since distributions don't tend to package +# the ELF linker scripts with binutils, and this results in a build failure. +LDFLAGS += -EB -maarch64linuxb UTS_MACHINE := aarch64_be else KBUILD_CPPFLAGS += -mlittle-endian CHECKFLAGS += -D__AARCH64EL__ AS += -EL -LDFLAGS += -EL -maarch64elf +LDFLAGS += -EL -maarch64linux # See comment above UTS_MACHINE := aarch64 endif -- cgit v1.2.3 From 59ee4129a279070d8e2f9dc1660330f6593c7808 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Tue, 10 Jul 2018 00:43:22 +0200 Subject: bpf: fix ldx in ld_abs rewrite for large offsets Mark reported that syzkaller triggered a KASAN detected slab-out-of-bounds bug in ___bpf_prog_run() with a BPF_LD | BPF_ABS word load at offset 0x8001. After further investigation it became clear that the issue was the BPF_LDX_MEM() which takes offset as an argument whereas it cannot encode larger than S16_MAX offsets into it. For this synthetical case we need to move the full address into tmp register instead and do the LDX without immediate value. Fixes: e0cea7ce988c ("bpf: implement ld_abs/ld_ind in native bpf") Reported-by: syzbot Reported-by: Mark Rutland Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov --- net/core/filter.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/net/core/filter.c b/net/core/filter.c index 5fa66a33927f..a13f5b1f1636 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -459,11 +459,21 @@ static bool convert_bpf_ld_abs(struct sock_filter *fp, struct bpf_insn **insnp) (!unaligned_ok && offset >= 0 && offset + ip_align >= 0 && offset + ip_align % size == 0))) { + bool ldx_off_ok = offset <= S16_MAX; + *insn++ = BPF_MOV64_REG(BPF_REG_TMP, BPF_REG_H); *insn++ = BPF_ALU64_IMM(BPF_SUB, BPF_REG_TMP, offset); - *insn++ = BPF_JMP_IMM(BPF_JSLT, BPF_REG_TMP, size, 2 + endian); - *insn++ = BPF_LDX_MEM(BPF_SIZE(fp->code), BPF_REG_A, BPF_REG_D, - offset); + *insn++ = BPF_JMP_IMM(BPF_JSLT, BPF_REG_TMP, + size, 2 + endian + (!ldx_off_ok * 2)); + if (ldx_off_ok) { + *insn++ = BPF_LDX_MEM(BPF_SIZE(fp->code), BPF_REG_A, + BPF_REG_D, offset); + } else { + *insn++ = BPF_MOV64_REG(BPF_REG_TMP, BPF_REG_D); + *insn++ = BPF_ALU64_IMM(BPF_ADD, BPF_REG_TMP, offset); + *insn++ = BPF_LDX_MEM(BPF_SIZE(fp->code), BPF_REG_A, + BPF_REG_TMP, 0); + } if (endian) *insn++ = BPF_ENDIAN(BPF_FROM_BE, BPF_REG_A, size * 8); *insn++ = BPF_JMP_A(8); -- cgit v1.2.3 From 5292221d6ddfed75e5b46cd42237a677094b99f3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 10 Jul 2018 12:56:45 -0500 Subject: Revert "drm/amd/display: Don't return ddc result and read_bytes in same return value" This reverts commit 018d82e5f02ef3583411bcaa4e00c69786f46f19. This breaks DDC in certain cases. Revert for 4.18 and previous kernels. For 4.19, this is fixed with the following more extensive patches: drm/amd/display: Serialize is_dp_sink_present drm/amd/display: Break out function to simply read aux reply drm/amd/display: Return aux replies directly to DRM drm/amd/display: Right shift AUX reply value sooner than later drm/amd/display: Read AUX channel even if only status byte is returned Link: https://lists.freedesktop.org/archives/amd-gfx/2018-July/023788.html Acked-by: Harry Wentland Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- .../drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 20 ++++++++------------ drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c | 10 +++------- drivers/gpu/drm/amd/display/dc/inc/dc_link_ddc.h | 5 ++--- 3 files changed, 13 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c index 4304d9e408b8..ace9ad578ca0 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c @@ -83,22 +83,21 @@ static ssize_t dm_dp_aux_transfer(struct drm_dp_aux *aux, enum i2c_mot_mode mot = (msg->request & DP_AUX_I2C_MOT) ? I2C_MOT_TRUE : I2C_MOT_FALSE; enum ddc_result res; - uint32_t read_bytes = msg->size; + ssize_t read_bytes; if (WARN_ON(msg->size > 16)) return -E2BIG; switch (msg->request & ~DP_AUX_I2C_MOT) { case DP_AUX_NATIVE_READ: - res = dal_ddc_service_read_dpcd_data( + read_bytes = dal_ddc_service_read_dpcd_data( TO_DM_AUX(aux)->ddc_service, false, I2C_MOT_UNDEF, msg->address, msg->buffer, - msg->size, - &read_bytes); - break; + msg->size); + return read_bytes; case DP_AUX_NATIVE_WRITE: res = dal_ddc_service_write_dpcd_data( TO_DM_AUX(aux)->ddc_service, @@ -109,15 +108,14 @@ static ssize_t dm_dp_aux_transfer(struct drm_dp_aux *aux, msg->size); break; case DP_AUX_I2C_READ: - res = dal_ddc_service_read_dpcd_data( + read_bytes = dal_ddc_service_read_dpcd_data( TO_DM_AUX(aux)->ddc_service, true, mot, msg->address, msg->buffer, - msg->size, - &read_bytes); - break; + msg->size); + return read_bytes; case DP_AUX_I2C_WRITE: res = dal_ddc_service_write_dpcd_data( TO_DM_AUX(aux)->ddc_service, @@ -139,9 +137,7 @@ static ssize_t dm_dp_aux_transfer(struct drm_dp_aux *aux, r == DDC_RESULT_SUCESSFULL); #endif - if (res != DDC_RESULT_SUCESSFULL) - return -EIO; - return read_bytes; + return msg->size; } static enum drm_connector_status diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c index ae48d603ebd6..49c2face1e7a 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c @@ -629,14 +629,13 @@ bool dal_ddc_service_query_ddc_data( return ret; } -enum ddc_result dal_ddc_service_read_dpcd_data( +ssize_t dal_ddc_service_read_dpcd_data( struct ddc_service *ddc, bool i2c, enum i2c_mot_mode mot, uint32_t address, uint8_t *data, - uint32_t len, - uint32_t *read) + uint32_t len) { struct aux_payload read_payload = { .i2c_over_aux = i2c, @@ -653,8 +652,6 @@ enum ddc_result dal_ddc_service_read_dpcd_data( .mot = mot }; - *read = 0; - if (len > DEFAULT_AUX_MAX_DATA_SIZE) { BREAK_TO_DEBUGGER(); return DDC_RESULT_FAILED_INVALID_OPERATION; @@ -664,8 +661,7 @@ enum ddc_result dal_ddc_service_read_dpcd_data( ddc->ctx->i2caux, ddc->ddc_pin, &command)) { - *read = command.payloads->length; - return DDC_RESULT_SUCESSFULL; + return (ssize_t)command.payloads->length; } return DDC_RESULT_FAILED_OPERATION; diff --git a/drivers/gpu/drm/amd/display/dc/inc/dc_link_ddc.h b/drivers/gpu/drm/amd/display/dc/inc/dc_link_ddc.h index 30b3a08b91be..090b7a8dd67b 100644 --- a/drivers/gpu/drm/amd/display/dc/inc/dc_link_ddc.h +++ b/drivers/gpu/drm/amd/display/dc/inc/dc_link_ddc.h @@ -102,14 +102,13 @@ bool dal_ddc_service_query_ddc_data( uint8_t *read_buf, uint32_t read_size); -enum ddc_result dal_ddc_service_read_dpcd_data( +ssize_t dal_ddc_service_read_dpcd_data( struct ddc_service *ddc, bool i2c, enum i2c_mot_mode mot, uint32_t address, uint8_t *data, - uint32_t len, - uint32_t *read); + uint32_t len); enum ddc_result dal_ddc_service_write_dpcd_data( struct ddc_service *ddc, -- cgit v1.2.3 From 5b5ccbc2b041f98f26b984e013d303b7f9e6fb8e Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Mon, 9 Jul 2018 16:45:35 +0100 Subject: Revert "tick: Prefer a lower rating device only if it's CPU local device" This reverts commit 1332a90558013ae4242e3dd7934bdcdeafb06c0d. The original issue was not because of incorrect checking of cpumask for both new and old tick device. It was incorrectly analysed was due to the misunderstanding of the comment and misinterpretation of the return value from tick_check_preferred. The main issue is with the clockevent driver that sets the cpumask to cpu_all_mask instead of cpu_possible_mask. Signed-off-by: Sudeep Holla Signed-off-by: Thomas Gleixner Tested-by: Kevin Hilman Tested-by: Martin Blumenstingl Cc: linux-arm-kernel@lists.infradead.org Cc: Marc Zyngier Link: https://lkml.kernel.org/r/1531151136-18297-1-git-send-email-sudeep.holla@arm.com --- kernel/time/tick-common.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index b7005dd21ec1..14de3727b18e 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -277,8 +277,7 @@ static bool tick_check_preferred(struct clock_event_device *curdev, */ return !curdev || newdev->rating > curdev->rating || - (!cpumask_equal(curdev->cpumask, newdev->cpumask) && - !tick_check_percpu(curdev, newdev, smp_processor_id())); + !cpumask_equal(curdev->cpumask, newdev->cpumask); } /* -- cgit v1.2.3 From 5e18e412973d6bb1804de1d4d30a891c774b006e Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Mon, 9 Jul 2018 16:45:36 +0100 Subject: clocksource: arm_arch_timer: Set arch_mem_timer cpumask to cpu_possible_mask Currently, arch_mem_timer cpumask is set to cpu_all_mask which should be fine. However, cpu_possible_mask is more accurate and if there are other clockevent source in the system which are set to cpu_possible_mask, then having cpu_all_mask may result in issue. E.g. on a platform with arm,sp804 timer with rating 300 and cpu_possible_mask and this arch_mem_timer timer with rating 400 and cpu_all_mask, tick_check_preferred may choose both preferred as the cpumasks are not equal though they must be. This issue was root caused incorrectly initially and a fix was merged as commit 1332a9055801 ("tick: Prefer a lower rating device only if it's CPU local device"). Signed-off-by: Sudeep Holla Signed-off-by: Thomas Gleixner Tested-by: Kevin Hilman Tested-by: Martin Blumenstingl Cc: linux-arm-kernel@lists.infradead.org Cc: Marc Zyngier Cc: Mark Rutland Link: https://lkml.kernel.org/r/1531151136-18297-2-git-send-email-sudeep.holla@arm.com --- drivers/clocksource/arm_arch_timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 57cb2f00fc07..d8c7f5750cdb 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -735,7 +735,7 @@ static void __arch_timer_setup(unsigned type, clk->features |= CLOCK_EVT_FEAT_DYNIRQ; clk->name = "arch_mem_timer"; clk->rating = 400; - clk->cpumask = cpu_all_mask; + clk->cpumask = cpu_possible_mask; if (arch_timer_mem_use_virtual) { clk->set_state_shutdown = arch_timer_shutdown_virt_mem; clk->set_state_oneshot_stopped = arch_timer_shutdown_virt_mem; -- cgit v1.2.3 From e96d71359e9bbea846a2111e4469a03a055dfa6f Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Mon, 9 Jul 2018 15:51:50 -0400 Subject: rseq: Use __u64 for rseq_cs fields, validate user inputs Change the rseq ABI so rseq_cs start_ip, post_commit_offset and abort_ip fields are seen as 64-bit fields by both 32-bit and 64-bit kernels rather that ignoring the 32 upper bits on 32-bit kernels. This ensures we have a consistent behavior for a 32-bit binary executed on 32-bit kernels and in compat mode on 64-bit kernels. Validating the value of abort_ip field to be below TASK_SIZE ensures the kernel don't return to an invalid address when returning to userspace after an abort. I don't fully trust each architecture code to consistently deal with invalid return addresses. Validating the value of the start_ip and post_commit_offset fields prevents overflow on arithmetic performed on those values, used to check whether abort_ip is within the rseq critical section. If validation fails, the process is killed with a segmentation fault. When the signature encountered before abort_ip does not match the expected signature, return -EINVAL rather than -EPERM to be consistent with other input validation return codes from rseq_get_rseq_cs(). Signed-off-by: Mathieu Desnoyers Signed-off-by: Thomas Gleixner Cc: linux-api@vger.kernel.org Cc: Peter Zijlstra Cc: "Paul E . McKenney" Cc: Boqun Feng Cc: Andy Lutomirski Cc: Dave Watson Cc: Paul Turner Cc: Andrew Morton Cc: Russell King Cc: "H . Peter Anvin" Cc: Andi Kleen Cc: Chris Lameter Cc: Ben Maurer Cc: Steven Rostedt Cc: Josh Triplett Cc: Linus Torvalds Cc: Catalin Marinas Cc: Will Deacon Cc: Michael Kerrisk Cc: Joel Fernandes Cc: "Paul E. McKenney" Cc: "H. Peter Anvin" Link: https://lkml.kernel.org/r/20180709195155.7654-2-mathieu.desnoyers@efficios.com --- include/uapi/linux/rseq.h | 6 +++--- kernel/rseq.c | 14 ++++++++++---- 2 files changed, 13 insertions(+), 7 deletions(-) diff --git a/include/uapi/linux/rseq.h b/include/uapi/linux/rseq.h index d620fa43756c..519ad6e176d1 100644 --- a/include/uapi/linux/rseq.h +++ b/include/uapi/linux/rseq.h @@ -52,10 +52,10 @@ struct rseq_cs { __u32 version; /* enum rseq_cs_flags */ __u32 flags; - LINUX_FIELD_u32_u64(start_ip); + __u64 start_ip; /* Offset from start_ip. */ - LINUX_FIELD_u32_u64(post_commit_offset); - LINUX_FIELD_u32_u64(abort_ip); + __u64 post_commit_offset; + __u64 abort_ip; } __attribute__((aligned(4 * sizeof(__u64)))); /* diff --git a/kernel/rseq.c b/kernel/rseq.c index 22b6acf1ad63..16b38c5342f9 100644 --- a/kernel/rseq.c +++ b/kernel/rseq.c @@ -130,14 +130,20 @@ static int rseq_get_rseq_cs(struct task_struct *t, struct rseq_cs *rseq_cs) urseq_cs = (struct rseq_cs __user *)ptr; if (copy_from_user(rseq_cs, urseq_cs, sizeof(*rseq_cs))) return -EFAULT; - if (rseq_cs->version > 0) - return -EINVAL; + if (rseq_cs->start_ip >= TASK_SIZE || + rseq_cs->start_ip + rseq_cs->post_commit_offset >= TASK_SIZE || + rseq_cs->abort_ip >= TASK_SIZE || + rseq_cs->version > 0) + return -EINVAL; + /* Check for overflow. */ + if (rseq_cs->start_ip + rseq_cs->post_commit_offset < rseq_cs->start_ip) + return -EINVAL; /* Ensure that abort_ip is not in the critical section. */ if (rseq_cs->abort_ip - rseq_cs->start_ip < rseq_cs->post_commit_offset) return -EINVAL; - usig = (u32 __user *)(rseq_cs->abort_ip - sizeof(u32)); + usig = (u32 __user *)(unsigned long)(rseq_cs->abort_ip - sizeof(u32)); ret = get_user(sig, usig); if (ret) return ret; @@ -146,7 +152,7 @@ static int rseq_get_rseq_cs(struct task_struct *t, struct rseq_cs *rseq_cs) printk_ratelimited(KERN_WARNING "Possible attack attempt. Unexpected rseq signature 0x%x, expecting 0x%x (pid=%d, addr=%p).\n", sig, current->rseq_sig, current->pid, usig); - return -EPERM; + return -EINVAL; } return 0; } -- cgit v1.2.3 From 8f28177014925f968baf45fc833c25848faf8c1c Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Mon, 9 Jul 2018 15:51:51 -0400 Subject: rseq: Use get_user/put_user rather than __get_user/__put_user __get_user()/__put_user() is used to read values for address ranges that were already checked with access_ok() on rseq registration. It has been recognized that __get_user/__put_user are optimizing the wrong thing. Replace them by get_user/put_user across rseq instead. If those end up showing up in benchmarks, the proper approach would be to use user_access_begin() / unsafe_{get,put}_user() / user_access_end() anyway. Signed-off-by: Mathieu Desnoyers Signed-off-by: Thomas Gleixner Cc: linux-api@vger.kernel.org Cc: Peter Zijlstra Cc: "Paul E . McKenney" Cc: Boqun Feng Cc: Andy Lutomirski Cc: Dave Watson Cc: Paul Turner Cc: Andrew Morton Cc: Russell King Cc: "H . Peter Anvin" Cc: Andi Kleen Cc: Chris Lameter Cc: Ben Maurer Cc: Steven Rostedt Cc: Josh Triplett Cc: Linus Torvalds Cc: Catalin Marinas Cc: Will Deacon Cc: Michael Kerrisk Cc: Joel Fernandes Cc: linux-arm-kernel@lists.infradead.org Link: https://lkml.kernel.org/r/20180709195155.7654-3-mathieu.desnoyers@efficios.com --- kernel/rseq.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/kernel/rseq.c b/kernel/rseq.c index 16b38c5342f9..2c8463acb50d 100644 --- a/kernel/rseq.c +++ b/kernel/rseq.c @@ -85,9 +85,9 @@ static int rseq_update_cpu_id(struct task_struct *t) { u32 cpu_id = raw_smp_processor_id(); - if (__put_user(cpu_id, &t->rseq->cpu_id_start)) + if (put_user(cpu_id, &t->rseq->cpu_id_start)) return -EFAULT; - if (__put_user(cpu_id, &t->rseq->cpu_id)) + if (put_user(cpu_id, &t->rseq->cpu_id)) return -EFAULT; trace_rseq_update(t); return 0; @@ -100,14 +100,14 @@ static int rseq_reset_rseq_cpu_id(struct task_struct *t) /* * Reset cpu_id_start to its initial state (0). */ - if (__put_user(cpu_id_start, &t->rseq->cpu_id_start)) + if (put_user(cpu_id_start, &t->rseq->cpu_id_start)) return -EFAULT; /* * Reset cpu_id to RSEQ_CPU_ID_UNINITIALIZED, so any user coming * in after unregistration can figure out that rseq needs to be * registered again. */ - if (__put_user(cpu_id, &t->rseq->cpu_id)) + if (put_user(cpu_id, &t->rseq->cpu_id)) return -EFAULT; return 0; } @@ -120,7 +120,7 @@ static int rseq_get_rseq_cs(struct task_struct *t, struct rseq_cs *rseq_cs) u32 sig; int ret; - ret = __get_user(ptr, &t->rseq->rseq_cs); + ret = get_user(ptr, &t->rseq->rseq_cs); if (ret) return ret; if (!ptr) { @@ -163,7 +163,7 @@ static int rseq_need_restart(struct task_struct *t, u32 cs_flags) int ret; /* Get thread flags. */ - ret = __get_user(flags, &t->rseq->flags); + ret = get_user(flags, &t->rseq->flags); if (ret) return ret; @@ -203,7 +203,7 @@ static int clear_rseq_cs(struct task_struct *t) * * Set rseq_cs to NULL with single-copy atomicity. */ - return __put_user(0UL, &t->rseq->rseq_cs); + return put_user(0UL, &t->rseq->rseq_cs); } /* -- cgit v1.2.3 From 0fb9a1abc8c97f858997e962694eb36b4517144e Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Mon, 9 Jul 2018 15:51:52 -0400 Subject: rseq: uapi: Update uapi comments Update rseq uapi header comments to reflect that user-space need to do thread-local loads/stores from/to the struct rseq fields. As a consequence of this added requirement, the kernel does not need to perform loads/stores with single-copy atomicity. Update the comment associated to the "flags" fields to describe more accurately that it's only useful to facilitate single-stepping through rseq critical sections with debuggers. Signed-off-by: Mathieu Desnoyers Signed-off-by: Thomas Gleixner Cc: linux-api@vger.kernel.org Cc: Peter Zijlstra Cc: "Paul E . McKenney" Cc: Boqun Feng Cc: Andy Lutomirski Cc: Dave Watson Cc: Paul Turner Cc: Andrew Morton Cc: Russell King Cc: "H . Peter Anvin" Cc: Andi Kleen Cc: Chris Lameter Cc: Ben Maurer Cc: Steven Rostedt Cc: Josh Triplett Cc: Linus Torvalds Cc: Catalin Marinas Cc: Will Deacon Cc: Michael Kerrisk Cc: Joel Fernandes Cc: "Paul E. McKenney" Cc: "H. Peter Anvin" Link: https://lkml.kernel.org/r/20180709195155.7654-4-mathieu.desnoyers@efficios.com --- include/uapi/linux/rseq.h | 69 ++++++++++++++++++++++++----------------------- kernel/rseq.c | 2 +- 2 files changed, 37 insertions(+), 34 deletions(-) diff --git a/include/uapi/linux/rseq.h b/include/uapi/linux/rseq.h index 519ad6e176d1..bf4188c13bec 100644 --- a/include/uapi/linux/rseq.h +++ b/include/uapi/linux/rseq.h @@ -67,28 +67,30 @@ struct rseq_cs { struct rseq { /* * Restartable sequences cpu_id_start field. Updated by the - * kernel, and read by user-space with single-copy atomicity - * semantics. Aligned on 32-bit. Always contains a value in the - * range of possible CPUs, although the value may not be the - * actual current CPU (e.g. if rseq is not initialized). This - * CPU number value should always be compared against the value - * of the cpu_id field before performing a rseq commit or - * returning a value read from a data structure indexed using - * the cpu_id_start value. + * kernel. Read by user-space with single-copy atomicity + * semantics. This field should only be read by the thread which + * registered this data structure. Aligned on 32-bit. Always + * contains a value in the range of possible CPUs, although the + * value may not be the actual current CPU (e.g. if rseq is not + * initialized). This CPU number value should always be compared + * against the value of the cpu_id field before performing a rseq + * commit or returning a value read from a data structure indexed + * using the cpu_id_start value. */ __u32 cpu_id_start; /* - * Restartable sequences cpu_id field. Updated by the kernel, - * and read by user-space with single-copy atomicity semantics. - * Aligned on 32-bit. Values RSEQ_CPU_ID_UNINITIALIZED and - * RSEQ_CPU_ID_REGISTRATION_FAILED have a special semantic: the - * former means "rseq uninitialized", and latter means "rseq - * initialization failed". This value is meant to be read within - * rseq critical sections and compared with the cpu_id_start - * value previously read, before performing the commit instruction, - * or read and compared with the cpu_id_start value before returning - * a value loaded from a data structure indexed using the - * cpu_id_start value. + * Restartable sequences cpu_id field. Updated by the kernel. + * Read by user-space with single-copy atomicity semantics. This + * field should only be read by the thread which registered this + * data structure. Aligned on 32-bit. Values + * RSEQ_CPU_ID_UNINITIALIZED and RSEQ_CPU_ID_REGISTRATION_FAILED + * have a special semantic: the former means "rseq uninitialized", + * and latter means "rseq initialization failed". This value is + * meant to be read within rseq critical sections and compared + * with the cpu_id_start value previously read, before performing + * the commit instruction, or read and compared with the + * cpu_id_start value before returning a value loaded from a data + * structure indexed using the cpu_id_start value. */ __u32 cpu_id; /* @@ -105,27 +107,28 @@ struct rseq { * targeted by the rseq_cs. Also needs to be set to NULL by user-space * before reclaiming memory that contains the targeted struct rseq_cs. * - * Read and set by the kernel with single-copy atomicity semantics. - * Set by user-space with single-copy atomicity semantics. Aligned - * on 64-bit. + * Read and set by the kernel. Set by user-space with single-copy + * atomicity semantics. This field should only be updated by the + * thread which registered this data structure. Aligned on 64-bit. */ LINUX_FIELD_u32_u64(rseq_cs); /* - * - RSEQ_DISABLE flag: + * Restartable sequences flags field. + * + * This field should only be updated by the thread which + * registered this data structure. Read by the kernel. + * Mainly used for single-stepping through rseq critical sections + * with debuggers. * - * Fallback fast-track flag for single-stepping. - * Set by user-space if lack of progress is detected. - * Cleared by user-space after rseq finish. - * Read by the kernel. * - RSEQ_CS_FLAG_NO_RESTART_ON_PREEMPT - * Inhibit instruction sequence block restart and event - * counter increment on preemption for this thread. + * Inhibit instruction sequence block restart on preemption + * for this thread. * - RSEQ_CS_FLAG_NO_RESTART_ON_SIGNAL - * Inhibit instruction sequence block restart and event - * counter increment on signal delivery for this thread. + * Inhibit instruction sequence block restart on signal + * delivery for this thread. * - RSEQ_CS_FLAG_NO_RESTART_ON_MIGRATE - * Inhibit instruction sequence block restart and event - * counter increment on migration for this thread. + * Inhibit instruction sequence block restart on migration for + * this thread. */ __u32 flags; } __attribute__((aligned(4 * sizeof(__u64)))); diff --git a/kernel/rseq.c b/kernel/rseq.c index 2c8463acb50d..2a7748675be7 100644 --- a/kernel/rseq.c +++ b/kernel/rseq.c @@ -201,7 +201,7 @@ static int clear_rseq_cs(struct task_struct *t) * of code outside of the rseq assembly block. This performs * a lazy clear of the rseq_cs field. * - * Set rseq_cs to NULL with single-copy atomicity. + * Set rseq_cs to NULL. */ return put_user(0UL, &t->rseq->rseq_cs); } -- cgit v1.2.3 From ec9c82e03a744e5698bd95eab872855861a821fa Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Mon, 9 Jul 2018 15:51:53 -0400 Subject: rseq: uapi: Declare rseq_cs field as union, update includes Declaring the rseq_cs field as a union between __u64 and two __u32 allows both 32-bit and 64-bit kernels to read the full __u64, and therefore validate that a 32-bit user-space cleared the upper 32 bits, thus ensuring a consistent behavior between native 32-bit kernels and 32-bit compat tasks on 64-bit kernels. Check that the rseq_cs value read is < TASK_SIZE. The asm/byteorder.h header needs to be included by rseq.h, now that it is not using linux/types_32_64.h anymore. Considering that only __32 and __u64 types are declared in linux/rseq.h, the linux/types.h header should always be included for both kernel and user-space code: including stdint.h is just for u64 and u32, which are not used in this header at all. Use copy_from_user()/clear_user() to interact with a 64-bit field, because arm32 does not implement 64-bit __get_user, and ppc32 does not 64-bit get_user. Considering that the rseq_cs pointer does not need to be loaded/stored with single-copy atomicity from the kernel anymore, we can simply use copy_from_user()/clear_user(). Signed-off-by: Mathieu Desnoyers Signed-off-by: Thomas Gleixner Cc: linux-api@vger.kernel.org Cc: Peter Zijlstra Cc: "Paul E . McKenney" Cc: Boqun Feng Cc: Andy Lutomirski Cc: Dave Watson Cc: Paul Turner Cc: Andrew Morton Cc: Russell King Cc: "H . Peter Anvin" Cc: Andi Kleen Cc: Chris Lameter Cc: Ben Maurer Cc: Steven Rostedt Cc: Josh Triplett Cc: Linus Torvalds Cc: Catalin Marinas Cc: Will Deacon Cc: Michael Kerrisk Cc: Joel Fernandes Cc: "Paul E. McKenney" Cc: "H. Peter Anvin" Link: https://lkml.kernel.org/r/20180709195155.7654-5-mathieu.desnoyers@efficios.com --- include/uapi/linux/rseq.h | 27 +++++++++++++++++++-------- kernel/rseq.c | 15 +++++++++------ tools/testing/selftests/rseq/rseq.h | 11 ++++++++++- 3 files changed, 38 insertions(+), 15 deletions(-) diff --git a/include/uapi/linux/rseq.h b/include/uapi/linux/rseq.h index bf4188c13bec..9a402fdb60e9 100644 --- a/include/uapi/linux/rseq.h +++ b/include/uapi/linux/rseq.h @@ -10,13 +10,8 @@ * Copyright (c) 2015-2018 Mathieu Desnoyers */ -#ifdef __KERNEL__ -# include -#else -# include -#endif - -#include +#include +#include enum rseq_cpu_id_state { RSEQ_CPU_ID_UNINITIALIZED = -1, @@ -111,7 +106,23 @@ struct rseq { * atomicity semantics. This field should only be updated by the * thread which registered this data structure. Aligned on 64-bit. */ - LINUX_FIELD_u32_u64(rseq_cs); + union { + __u64 ptr64; +#ifdef __LP64__ + __u64 ptr; +#else + struct { +#if (defined(__BYTE_ORDER) && (__BYTE_ORDER == __BIG_ENDIAN)) || defined(__BIG_ENDIAN) + __u32 padding; /* Initialized to zero. */ + __u32 ptr32; +#else /* LITTLE */ + __u32 ptr32; + __u32 padding; /* Initialized to zero. */ +#endif /* ENDIAN */ + } ptr; +#endif + } rseq_cs; + /* * Restartable sequences flags field. * diff --git a/kernel/rseq.c b/kernel/rseq.c index 2a7748675be7..c6242d8594dc 100644 --- a/kernel/rseq.c +++ b/kernel/rseq.c @@ -115,19 +115,20 @@ static int rseq_reset_rseq_cpu_id(struct task_struct *t) static int rseq_get_rseq_cs(struct task_struct *t, struct rseq_cs *rseq_cs) { struct rseq_cs __user *urseq_cs; - unsigned long ptr; + u64 ptr; u32 __user *usig; u32 sig; int ret; - ret = get_user(ptr, &t->rseq->rseq_cs); - if (ret) - return ret; + if (copy_from_user(&ptr, &t->rseq->rseq_cs.ptr64, sizeof(ptr))) + return -EFAULT; if (!ptr) { memset(rseq_cs, 0, sizeof(*rseq_cs)); return 0; } - urseq_cs = (struct rseq_cs __user *)ptr; + if (ptr >= TASK_SIZE) + return -EINVAL; + urseq_cs = (struct rseq_cs __user *)(unsigned long)ptr; if (copy_from_user(rseq_cs, urseq_cs, sizeof(*rseq_cs))) return -EFAULT; @@ -203,7 +204,9 @@ static int clear_rseq_cs(struct task_struct *t) * * Set rseq_cs to NULL. */ - return put_user(0UL, &t->rseq->rseq_cs); + if (clear_user(&t->rseq->rseq_cs.ptr64, sizeof(t->rseq->rseq_cs.ptr64))) + return -EFAULT; + return 0; } /* diff --git a/tools/testing/selftests/rseq/rseq.h b/tools/testing/selftests/rseq/rseq.h index a4684112676c..f2073cfa4448 100644 --- a/tools/testing/selftests/rseq/rseq.h +++ b/tools/testing/selftests/rseq/rseq.h @@ -133,6 +133,15 @@ static inline uint32_t rseq_current_cpu(void) return cpu; } +static inline void rseq_clear_rseq_cs(void) +{ +#ifdef __LP64__ + __rseq_abi.rseq_cs.ptr = 0; +#else + __rseq_abi.rseq_cs.ptr.ptr32 = 0; +#endif +} + /* * rseq_prepare_unload() should be invoked by each thread using rseq_finish*() * at least once between their last rseq_finish*() and library unload of the @@ -143,7 +152,7 @@ static inline uint32_t rseq_current_cpu(void) */ static inline void rseq_prepare_unload(void) { - __rseq_abi.rseq_cs = 0; + rseq_clear_rseq_cs(); } #endif /* RSEQ_H_ */ -- cgit v1.2.3 From 4f4c0acdf4652a964da869d578a3c8bf6df14ce2 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Mon, 9 Jul 2018 15:51:54 -0400 Subject: rseq: Remove unused types_32_64.h uapi header This header was introduced in the 4.18 merge window, and rseq does not need it anymore. Nuke it before the final release. Signed-off-by: Mathieu Desnoyers Signed-off-by: Thomas Gleixner Cc: linux-api@vger.kernel.org Cc: Peter Zijlstra Cc: "Paul E . McKenney" Cc: Boqun Feng Cc: Andy Lutomirski Cc: Dave Watson Cc: Paul Turner Cc: Andrew Morton Cc: Russell King Cc: "H . Peter Anvin" Cc: Andi Kleen Cc: Chris Lameter Cc: Ben Maurer Cc: Steven Rostedt Cc: Josh Triplett Cc: Linus Torvalds Cc: Catalin Marinas Cc: Will Deacon Cc: Michael Kerrisk Cc: Joel Fernandes Cc: "Paul E. McKenney" Cc: "H. Peter Anvin" Link: https://lkml.kernel.org/r/20180709195155.7654-6-mathieu.desnoyers@efficios.com --- include/uapi/linux/types_32_64.h | 50 ---------------------------------------- 1 file changed, 50 deletions(-) delete mode 100644 include/uapi/linux/types_32_64.h diff --git a/include/uapi/linux/types_32_64.h b/include/uapi/linux/types_32_64.h deleted file mode 100644 index 0a87ace34a57..000000000000 --- a/include/uapi/linux/types_32_64.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -#ifndef _UAPI_LINUX_TYPES_32_64_H -#define _UAPI_LINUX_TYPES_32_64_H - -/* - * linux/types_32_64.h - * - * Integer type declaration for pointers across 32-bit and 64-bit systems. - * - * Copyright (c) 2015-2018 Mathieu Desnoyers - */ - -#ifdef __KERNEL__ -# include -#else -# include -#endif - -#include - -#ifdef __BYTE_ORDER -# if (__BYTE_ORDER == __BIG_ENDIAN) -# define LINUX_BYTE_ORDER_BIG_ENDIAN -# else -# define LINUX_BYTE_ORDER_LITTLE_ENDIAN -# endif -#else -# ifdef __BIG_ENDIAN -# define LINUX_BYTE_ORDER_BIG_ENDIAN -# else -# define LINUX_BYTE_ORDER_LITTLE_ENDIAN -# endif -#endif - -#ifdef __LP64__ -# define LINUX_FIELD_u32_u64(field) __u64 field -# define LINUX_FIELD_u32_u64_INIT_ONSTACK(field, v) field = (intptr_t)v -#else -# ifdef LINUX_BYTE_ORDER_BIG_ENDIAN -# define LINUX_FIELD_u32_u64(field) __u32 field ## _padding, field -# define LINUX_FIELD_u32_u64_INIT_ONSTACK(field, v) \ - field ## _padding = 0, field = (intptr_t)v -# else -# define LINUX_FIELD_u32_u64(field) __u32 field, field ## _padding -# define LINUX_FIELD_u32_u64_INIT_ONSTACK(field, v) \ - field = (intptr_t)v, field ## _padding = 0 -# endif -#endif - -#endif /* _UAPI_LINUX_TYPES_32_64_H */ -- cgit v1.2.3 From 8a46580128a02bdc18d7dcc0cba19d3cea4fb9c4 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Mon, 9 Jul 2018 15:51:55 -0400 Subject: rseq/selftests: cleanup: Update comment above rseq_prepare_unload rseq as it was merged does not have rseq_finish_*() in the user-space selftests anymore. Update the rseq_prepare_unload() helper comment to adapt to this reality. Signed-off-by: Mathieu Desnoyers Signed-off-by: Thomas Gleixner Cc: linux-api@vger.kernel.org Cc: Peter Zijlstra Cc: "Paul E . McKenney" Cc: Boqun Feng Cc: Andy Lutomirski Cc: Dave Watson Cc: Paul Turner Cc: Andrew Morton Cc: Russell King Cc: "H . Peter Anvin" Cc: Andi Kleen Cc: Chris Lameter Cc: Ben Maurer Cc: Steven Rostedt Cc: Josh Triplett Cc: Linus Torvalds Cc: Catalin Marinas Cc: Will Deacon Cc: Michael Kerrisk Cc: Joel Fernandes Cc: "Paul E. McKenney" Cc: "H. Peter Anvin" Link: https://lkml.kernel.org/r/20180709195155.7654-7-mathieu.desnoyers@efficios.com --- tools/testing/selftests/rseq/rseq.h | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/rseq/rseq.h b/tools/testing/selftests/rseq/rseq.h index f2073cfa4448..86ce22417e0d 100644 --- a/tools/testing/selftests/rseq/rseq.h +++ b/tools/testing/selftests/rseq/rseq.h @@ -143,12 +143,13 @@ static inline void rseq_clear_rseq_cs(void) } /* - * rseq_prepare_unload() should be invoked by each thread using rseq_finish*() - * at least once between their last rseq_finish*() and library unload of the - * library defining the rseq critical section (struct rseq_cs). This also - * applies to use of rseq in code generated by JIT: rseq_prepare_unload() - * should be invoked at least once by each thread using rseq_finish*() before - * reclaim of the memory holding the struct rseq_cs. + * rseq_prepare_unload() should be invoked by each thread executing a rseq + * critical section at least once between their last critical section and + * library unload of the library defining the rseq critical section + * (struct rseq_cs). This also applies to use of rseq in code generated by + * JIT: rseq_prepare_unload() should be invoked at least once by each + * thread executing a rseq critical section before reclaim of the memory + * holding the struct rseq_cs. */ static inline void rseq_prepare_unload(void) { -- cgit v1.2.3 From ed6b4b5559769c6c5a0fcb3fac8a9e1f4e58c4ae Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Mon, 25 Jun 2018 11:07:17 +0200 Subject: drm/amdgpu: Reserve VM root shared fence slot for command submission (v3) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Without this, there could not be enough slots, which could trigger the BUG_ON in reservation_object_add_shared_fence. v2: * Jump to the error label instead of returning directly (Jerry Zhang) v3: * Reserve slots for command submission after VM updates (Christian König) Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/106418 Reported-by: mikhail.v.gavrilov@gmail.com Signed-off-by: Michel Dänzer Signed-off-by: Junwei Zhang Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index 82312a7bc6ad..9c85a90be293 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -927,6 +927,10 @@ static int amdgpu_cs_ib_vm_chunk(struct amdgpu_device *adev, r = amdgpu_bo_vm_update_pte(p); if (r) return r; + + r = reservation_object_reserve_shared(vm->root.base.bo->tbo.resv); + if (r) + return r; } return amdgpu_cs_sync_rings(p); -- cgit v1.2.3 From 0b9021972d3eef525d53076d8c7ac091e988d2e4 Mon Sep 17 00:00:00 2001 From: Christian König Date: Fri, 6 Jul 2018 13:46:05 +0200 Subject: drm/amd/display: fix invalid function table override MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise we try to program hardware with the wrong watermark functions when multiple DCE generations are installed in one system. Signed-off-by: Christian König Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/dce/dce_mem_input.c | 27 ++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_mem_input.c b/drivers/gpu/drm/amd/display/dc/dce/dce_mem_input.c index b235a75355b8..bae752332a9f 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_mem_input.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_mem_input.c @@ -741,6 +741,29 @@ static struct mem_input_funcs dce_mi_funcs = { .mem_input_is_flip_pending = dce_mi_is_flip_pending }; +static struct mem_input_funcs dce112_mi_funcs = { + .mem_input_program_display_marks = dce112_mi_program_display_marks, + .allocate_mem_input = dce_mi_allocate_dmif, + .free_mem_input = dce_mi_free_dmif, + .mem_input_program_surface_flip_and_addr = + dce_mi_program_surface_flip_and_addr, + .mem_input_program_pte_vm = dce_mi_program_pte_vm, + .mem_input_program_surface_config = + dce_mi_program_surface_config, + .mem_input_is_flip_pending = dce_mi_is_flip_pending +}; + +static struct mem_input_funcs dce120_mi_funcs = { + .mem_input_program_display_marks = dce120_mi_program_display_marks, + .allocate_mem_input = dce_mi_allocate_dmif, + .free_mem_input = dce_mi_free_dmif, + .mem_input_program_surface_flip_and_addr = + dce_mi_program_surface_flip_and_addr, + .mem_input_program_pte_vm = dce_mi_program_pte_vm, + .mem_input_program_surface_config = + dce_mi_program_surface_config, + .mem_input_is_flip_pending = dce_mi_is_flip_pending +}; void dce_mem_input_construct( struct dce_mem_input *dce_mi, @@ -769,7 +792,7 @@ void dce112_mem_input_construct( const struct dce_mem_input_mask *mi_mask) { dce_mem_input_construct(dce_mi, ctx, inst, regs, mi_shift, mi_mask); - dce_mi->base.funcs->mem_input_program_display_marks = dce112_mi_program_display_marks; + dce_mi->base.funcs = &dce112_mi_funcs; } void dce120_mem_input_construct( @@ -781,5 +804,5 @@ void dce120_mem_input_construct( const struct dce_mem_input_mask *mi_mask) { dce_mem_input_construct(dce_mi, ctx, inst, regs, mi_shift, mi_mask); - dce_mi->base.funcs->mem_input_program_display_marks = dce120_mi_program_display_marks; + dce_mi->base.funcs = &dce120_mi_funcs; } -- cgit v1.2.3 From 9d4a0d4cdc8b5904ec7c9b9e04bab3e9e60d7a74 Mon Sep 17 00:00:00 2001 From: Andrey Grodzovsky Date: Thu, 5 Jul 2018 14:49:34 -0400 Subject: drm/amdgpu: Verify root PD is mapped into kernel address space (v4) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Problem: When PD/PT update made by CPU root PD was not yet mapped causing page fault. Fix: Verify root PD is mapped into CPU address space. v2: Make sure that we add the root PD to the relocated list since then it's get mapped into CPU address space bt default in amdgpu_vm_update_directories. v3: Drop change to not move kernel type BOs to evicted list. v4: Remove redundant bo move to relocated list. Link: https://bugs.freedesktop.org/show_bug.cgi?id=107065 Signed-off-by: Andrey Grodzovsky Reviewed-by: Christian König Reviewed-by: Junwei Zhang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index edf16b2b957a..fdcb498f6d19 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -107,6 +107,9 @@ static void amdgpu_vm_bo_base_init(struct amdgpu_vm_bo_base *base, return; list_add_tail(&base->bo_list, &bo->va); + if (bo->tbo.type == ttm_bo_type_kernel) + list_move(&base->vm_status, &vm->relocated); + if (bo->tbo.resv != vm->root.base.bo->tbo.resv) return; @@ -468,7 +471,6 @@ static int amdgpu_vm_alloc_levels(struct amdgpu_device *adev, pt->parent = amdgpu_bo_ref(parent->base.bo); amdgpu_vm_bo_base_init(&entry->base, vm, pt); - list_move(&entry->base.vm_status, &vm->relocated); } if (level < AMDGPU_VM_PTB) { -- cgit v1.2.3 From b5f3bc39a0e815a30005da246dd4ad47fd2f88ff Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Mon, 2 Jul 2018 13:01:58 -0700 Subject: scsi: qla2xxx: Fix inconsistent DMA mem alloc/free GPNFT command allocates 2 buffer for switch query. On completion, the same buffers were freed using different size, instead of using original size at the time of allocation. This patch saves the size of the request and response buffers and uses that to free them. Following stack trace can be seen when using debug kernel dump_stack+0x19/0x1b __warn+0xd8/0x100 warn_slowpath_fmt+0x5f/0x80 check_unmap+0xfb/0xa20 debug_dma_free_coherent+0x110/0x160 qla24xx_sp_unmap+0x131/0x1e0 [qla2xxx] qla24xx_async_gnnft_done+0xb6/0x550 [qla2xxx] qla2x00_do_work+0x1ec/0x9f0 [qla2xxx] Cc: # v4.17+ Fixes: 33b28357dd00 ("scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan") Reported-by: Ewan D. Milne Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_def.h | 2 ++ drivers/scsi/qla2xxx/qla_gs.c | 40 ++++++++++++++++++++++++++-------------- 2 files changed, 28 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 9442e18aef6f..0f94b1d62d3f 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -361,6 +361,8 @@ struct ct_arg { dma_addr_t rsp_dma; u32 req_size; u32 rsp_size; + u32 req_allocated_size; + u32 rsp_allocated_size; void *req; void *rsp; port_id_t id; diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index 4bc2b66b299f..2c35b0b2baa0 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -556,7 +556,7 @@ err2: /* please ignore kernel warning. otherwise, we have mem leak. */ if (sp->u.iocb_cmd.u.ctarg.req) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.req_allocated_size, sp->u.iocb_cmd.u.ctarg.req, sp->u.iocb_cmd.u.ctarg.req_dma); sp->u.iocb_cmd.u.ctarg.req = NULL; @@ -564,7 +564,7 @@ err2: if (sp->u.iocb_cmd.u.ctarg.rsp) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size, sp->u.iocb_cmd.u.ctarg.rsp, sp->u.iocb_cmd.u.ctarg.rsp_dma); sp->u.iocb_cmd.u.ctarg.rsp = NULL; @@ -617,6 +617,7 @@ static int qla_async_rftid(scsi_qla_host_t *vha, port_id_t *d_id) sp->u.iocb_cmd.u.ctarg.req = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.req_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.req_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.req) { ql_log(ql_log_warn, vha, 0xd041, "%s: Failed to allocate ct_sns request.\n", @@ -627,6 +628,7 @@ static int qla_async_rftid(scsi_qla_host_t *vha, port_id_t *d_id) sp->u.iocb_cmd.u.ctarg.rsp = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.rsp_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.rsp) { ql_log(ql_log_warn, vha, 0xd042, "%s: Failed to allocate ct_sns request.\n", @@ -712,6 +714,7 @@ static int qla_async_rffid(scsi_qla_host_t *vha, port_id_t *d_id, sp->u.iocb_cmd.u.ctarg.req = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.req_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.req_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.req) { ql_log(ql_log_warn, vha, 0xd041, "%s: Failed to allocate ct_sns request.\n", @@ -722,6 +725,7 @@ static int qla_async_rffid(scsi_qla_host_t *vha, port_id_t *d_id, sp->u.iocb_cmd.u.ctarg.rsp = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.rsp_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.rsp) { ql_log(ql_log_warn, vha, 0xd042, "%s: Failed to allocate ct_sns request.\n", @@ -802,6 +806,7 @@ static int qla_async_rnnid(scsi_qla_host_t *vha, port_id_t *d_id, sp->u.iocb_cmd.u.ctarg.req = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.req_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.req_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.req) { ql_log(ql_log_warn, vha, 0xd041, "%s: Failed to allocate ct_sns request.\n", @@ -812,6 +817,7 @@ static int qla_async_rnnid(scsi_qla_host_t *vha, port_id_t *d_id, sp->u.iocb_cmd.u.ctarg.rsp = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.rsp_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.rsp) { ql_log(ql_log_warn, vha, 0xd042, "%s: Failed to allocate ct_sns request.\n", @@ -909,6 +915,7 @@ static int qla_async_rsnn_nn(scsi_qla_host_t *vha) sp->u.iocb_cmd.u.ctarg.req = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.req_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.req_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.req) { ql_log(ql_log_warn, vha, 0xd041, "%s: Failed to allocate ct_sns request.\n", @@ -919,6 +926,7 @@ static int qla_async_rsnn_nn(scsi_qla_host_t *vha) sp->u.iocb_cmd.u.ctarg.rsp = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.rsp_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.rsp) { ql_log(ql_log_warn, vha, 0xd042, "%s: Failed to allocate ct_sns request.\n", @@ -3388,14 +3396,14 @@ void qla24xx_sp_unmap(scsi_qla_host_t *vha, srb_t *sp) { if (sp->u.iocb_cmd.u.ctarg.req) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.req_allocated_size, sp->u.iocb_cmd.u.ctarg.req, sp->u.iocb_cmd.u.ctarg.req_dma); sp->u.iocb_cmd.u.ctarg.req = NULL; } if (sp->u.iocb_cmd.u.ctarg.rsp) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size, sp->u.iocb_cmd.u.ctarg.rsp, sp->u.iocb_cmd.u.ctarg.rsp_dma); sp->u.iocb_cmd.u.ctarg.rsp = NULL; @@ -3596,14 +3604,14 @@ static void qla2x00_async_gpnid_sp_done(void *s, int res) /* please ignore kernel warning. otherwise, we have mem leak. */ if (sp->u.iocb_cmd.u.ctarg.req) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.req_allocated_size, sp->u.iocb_cmd.u.ctarg.req, sp->u.iocb_cmd.u.ctarg.req_dma); sp->u.iocb_cmd.u.ctarg.req = NULL; } if (sp->u.iocb_cmd.u.ctarg.rsp) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size, sp->u.iocb_cmd.u.ctarg.rsp, sp->u.iocb_cmd.u.ctarg.rsp_dma); sp->u.iocb_cmd.u.ctarg.rsp = NULL; @@ -3654,6 +3662,7 @@ int qla24xx_async_gpnid(scsi_qla_host_t *vha, port_id_t *id) sp->u.iocb_cmd.u.ctarg.req = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.req_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.req_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.req) { ql_log(ql_log_warn, vha, 0xd041, "Failed to allocate ct_sns request.\n"); @@ -3663,6 +3672,7 @@ int qla24xx_async_gpnid(scsi_qla_host_t *vha, port_id_t *id) sp->u.iocb_cmd.u.ctarg.rsp = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.rsp_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.rsp) { ql_log(ql_log_warn, vha, 0xd042, "Failed to allocate ct_sns request.\n"); @@ -4142,14 +4152,14 @@ static void qla2x00_async_gpnft_gnnft_sp_done(void *s, int res) */ if (sp->u.iocb_cmd.u.ctarg.req) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.req_allocated_size, sp->u.iocb_cmd.u.ctarg.req, sp->u.iocb_cmd.u.ctarg.req_dma); sp->u.iocb_cmd.u.ctarg.req = NULL; } if (sp->u.iocb_cmd.u.ctarg.rsp) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size, sp->u.iocb_cmd.u.ctarg.rsp, sp->u.iocb_cmd.u.ctarg.rsp_dma); sp->u.iocb_cmd.u.ctarg.rsp = NULL; @@ -4179,14 +4189,14 @@ static void qla2x00_async_gpnft_gnnft_sp_done(void *s, int res) /* please ignore kernel warning. Otherwise, we have mem leak. */ if (sp->u.iocb_cmd.u.ctarg.req) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.req_allocated_size, sp->u.iocb_cmd.u.ctarg.req, sp->u.iocb_cmd.u.ctarg.req_dma); sp->u.iocb_cmd.u.ctarg.req = NULL; } if (sp->u.iocb_cmd.u.ctarg.rsp) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size, sp->u.iocb_cmd.u.ctarg.rsp, sp->u.iocb_cmd.u.ctarg.rsp_dma); sp->u.iocb_cmd.u.ctarg.rsp = NULL; @@ -4281,14 +4291,14 @@ static int qla24xx_async_gnnft(scsi_qla_host_t *vha, struct srb *sp, done_free_sp: if (sp->u.iocb_cmd.u.ctarg.req) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.req_allocated_size, sp->u.iocb_cmd.u.ctarg.req, sp->u.iocb_cmd.u.ctarg.req_dma); sp->u.iocb_cmd.u.ctarg.req = NULL; } if (sp->u.iocb_cmd.u.ctarg.rsp) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size, sp->u.iocb_cmd.u.ctarg.rsp, sp->u.iocb_cmd.u.ctarg.rsp_dma); sp->u.iocb_cmd.u.ctarg.rsp = NULL; @@ -4349,6 +4359,7 @@ int qla24xx_async_gpnft(scsi_qla_host_t *vha, u8 fc4_type, srb_t *sp) sp->u.iocb_cmd.u.ctarg.req = dma_zalloc_coherent( &vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.req_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.req_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.req) { ql_log(ql_log_warn, vha, 0xffff, "Failed to allocate ct_sns request.\n"); @@ -4366,6 +4377,7 @@ int qla24xx_async_gpnft(scsi_qla_host_t *vha, u8 fc4_type, srb_t *sp) sp->u.iocb_cmd.u.ctarg.rsp = dma_zalloc_coherent( &vha->hw->pdev->dev, rspsz, &sp->u.iocb_cmd.u.ctarg.rsp_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.rsp) { ql_log(ql_log_warn, vha, 0xffff, "Failed to allocate ct_sns request.\n"); @@ -4425,14 +4437,14 @@ int qla24xx_async_gpnft(scsi_qla_host_t *vha, u8 fc4_type, srb_t *sp) done_free_sp: if (sp->u.iocb_cmd.u.ctarg.req) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.req_allocated_size, sp->u.iocb_cmd.u.ctarg.req, sp->u.iocb_cmd.u.ctarg.req_dma); sp->u.iocb_cmd.u.ctarg.req = NULL; } if (sp->u.iocb_cmd.u.ctarg.rsp) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size, sp->u.iocb_cmd.u.ctarg.rsp, sp->u.iocb_cmd.u.ctarg.rsp_dma); sp->u.iocb_cmd.u.ctarg.rsp = NULL; -- cgit v1.2.3 From d48cc67cd4406d589fdbfa8c7d51c86532f86feb Mon Sep 17 00:00:00 2001 From: "himanshu.madhani@cavium.com" Date: Mon, 2 Jul 2018 13:01:59 -0700 Subject: scsi: qla2xxx: Fix kernel crash due to late workqueue allocation This patch fixes crash for FCoE adapter. Once driver initialization is complete, firmware will start posting Asynchronous Event, However driver has not yet allocated workqueue to process and queue up work. This delay of allocating workqueue results into NULL pointer access. The following stack trace is seen: [ 24.577259] BUG: unable to handle kernel NULL pointer dereference at 0000000000000102 [ 24.623133] PGD 0 P4D 0 [ 24.636760] Oops: 0000 [#1] SMP NOPTI [ 24.656942] Modules linked in: i2c_algo_bit drm_kms_helper sr_mod(+) syscopyarea sysfillrect sysimgblt cdrom fb_sys_fops ata_generic ttm pata_acpi sd_mod ahci pata_atiixp sfc(+) qla2xxx(+) libahci drm qla4xxx(+) nvme_fc hpsa mdio libiscsi qlcnic(+) nvme_fabrics scsi_transport_sas serio_raw mtd crc32c_intel libata nvme_core i2c_core scsi_transport_iscsi tg3 scsi_transport_fc bnx2 iscsi_boot_sysfs dm_multipath dm_mirror dm_region_hash dm_log dm_mod [ 24.887449] CPU: 0 PID: 177 Comm: kworker/0:3 Not tainted 4.17.0-rc6 #1 [ 24.925119] Hardware name: HP ProLiant DL385 G7, BIOS A18 08/15/2012 [ 24.962106] Workqueue: events work_for_cpu_fn [ 24.987098] RIP: 0010:__queue_work+0x1f/0x3a0 [ 25.011672] RSP: 0018:ffff992642ceba10 EFLAGS: 00010082 [ 25.042116] RAX: 0000000000000082 RBX: 0000000000000082 RCX: 0000000000000000 [ 25.083293] RDX: ffff8cf9abc6d7d0 RSI: 0000000000000000 RDI: 0000000000002000 [ 25.123094] RBP: 0000000000000000 R08: 0000000000025a40 R09: ffff8cf9aade2880 [ 25.164087] R10: 0000000000000000 R11: ffff992642ceb6f0 R12: ffff8cf9abc6d7d0 [ 25.202280] R13: 0000000000002000 R14: ffff8cf9abc6d7b8 R15: 0000000000002000 [ 25.242050] FS: 0000000000000000(0000) f9b5c00000(0000) knlGS:0000000000000000 [ 25.977565] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 26.010457] CR2: 0000000000000102 CR3: 000000030760a000 CR4: 00000000000406f0 [ 26.051048] Call Trace: [ 26.063572] ? __switch_to_asm+0x34/0x70 [ 26.086079] queue_work_on+0x24/0x40 [ 26.107090] qla2x00_post_work+0x81/0xb0 [qla2xxx] [ 26.133356] qla2x00_async_event+0x1ad/0x1a20 [qla2xxx] [ 26.164075] ? lock_timer_base+0x67/0x80 [ 26.186420] ? try_to_del_timer_sync+0x4d/0x80 [ 26.212284] ? del_timer_sync+0x35/0x40 [ 26.234080] ? schedule_timeout+0x165/0x2f0 [ 26.259575] qla82xx_poll+0x13e/0x180 [qla2xxx] [ 26.285740] qla2x00_mailbox_command+0x74b/0xf50 [qla2xxx] [ 26.319040] qla82xx_set_driver_version+0x13b/0x1c0 [qla2xxx] [ 26.352108] ? qla2x00_init_rings+0x206/0x3f0 [qla2xxx] [ 26.381733] qla2x00_initialize_adapter+0x35c/0x7f0 [qla2xxx] [ 26.413240] qla2x00_probe_one+0x1479/0x2390 [qla2xxx] [ 26.442055] local_pci_probe+0x3f/0xa0 [ 26.463108] work_for_cpu_fn+0x10/0x20 [ 26.483295] process_one_work+0x152/0x350 [ 26.505730] worker_thread+0x1cf/0x3e0 [ 26.527090] kthread+0xf5/0x130 [ 26.545085] ? max_active_store+0x80/0x80 [ 26.568085] ? kthread_bind+0x10/0x10 [ 26.589533] ret_from_fork+0x22/0x40 [ 26.610192] Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 89 ff 41 56 41 55 41 89 fd 41 54 49 89 d4 55 48 89 f5 53 48 83 ec 0 86 02 01 00 00 01 0f 85 80 02 00 00 49 c7 c6 c0 ec 01 00 41 [ 27.308540] RIP: __queue_work+0x1f/0x3a0 RSP: ffff992642ceba10 [ 27.341591] CR2: 0000000000000102 [ 27.360208] ---[ end trace 01b7b7ae2c005cf3 ]--- Cc: # v4.17+ Fixes: 9b3e0f4d4147 ("scsi: qla2xxx: Move work element processing out of DPC thread" Reported-by: Li Wang Tested-by: Li Wang Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index e881fce7477a..9f309e572be4 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -3180,6 +3180,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) "req->req_q_in=%p req->req_q_out=%p rsp->rsp_q_in=%p rsp->rsp_q_out=%p.\n", req->req_q_in, req->req_q_out, rsp->rsp_q_in, rsp->rsp_q_out); + ha->wq = alloc_workqueue("qla2xxx_wq", 0, 0); + if (ha->isp_ops->initialize_adapter(base_vha)) { ql_log(ql_log_fatal, base_vha, 0x00d6, "Failed to initialize adapter - Adapter flags %x.\n", @@ -3216,8 +3218,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) host->can_queue, base_vha->req, base_vha->mgmt_svr_loop_id, host->sg_tablesize); - ha->wq = alloc_workqueue("qla2xxx_wq", 0, 0); - if (ha->mqenable) { bool mq = false; bool startit = false; -- cgit v1.2.3 From 36eb8ff672faee83ccce60c191f0fef07c6adce6 Mon Sep 17 00:00:00 2001 From: Chuck Anderson Date: Mon, 2 Jul 2018 13:02:00 -0700 Subject: scsi: qla2xxx: Fix NULL pointer dereference for fcport search Crash dump shows following instructions crash> bt PID: 0 TASK: ffffffffbe412480 CPU: 0 COMMAND: "swapper/0" #0 [ffff891ee0003868] machine_kexec at ffffffffbd063ef1 #1 [ffff891ee00038c8] __crash_kexec at ffffffffbd12b6f2 #2 [ffff891ee0003998] crash_kexec at ffffffffbd12c84c #3 [ffff891ee00039b8] oops_end at ffffffffbd030f0a #4 [ffff891ee00039e0] no_context at ffffffffbd074643 #5 [ffff891ee0003a40] __bad_area_nosemaphore at ffffffffbd07496e #6 [ffff891ee0003a90] bad_area_nosemaphore at ffffffffbd074a64 #7 [ffff891ee0003aa0] __do_page_fault at ffffffffbd074b0a #8 [ffff891ee0003b18] do_page_fault at ffffffffbd074fc8 #9 [ffff891ee0003b50] page_fault at ffffffffbda01925 [exception RIP: qlt_schedule_sess_for_deletion+15] RIP: ffffffffc02e526f RSP: ffff891ee0003c08 RFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffc0307847 RDX: 00000000000020e6 RSI: ffff891edbc377c8 RDI: 0000000000000000 RBP: ffff891ee0003c18 R8: ffffffffc02f0b20 R9: 0000000000000250 R10: 0000000000000258 R11: 000000000000b780 R12: ffff891ed9b43000 R13: 00000000000000f0 R14: 0000000000000006 R15: ffff891edbc377c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff891ee0003c20] qla2x00_fcport_event_handler at ffffffffc02853d3 [qla2xxx] #11 [ffff891ee0003cf0] __dta_qla24xx_async_gnl_sp_done_333 at ffffffffc0285a1d [qla2xxx] #12 [ffff891ee0003de8] qla24xx_process_response_queue at ffffffffc02a2eb5 [qla2xxx] #13 [ffff891ee0003e88] qla24xx_msix_rsp_q at ffffffffc02a5403 [qla2xxx] #14 [ffff891ee0003ec0] __handle_irq_event_percpu at ffffffffbd0f4c59 #15 [ffff891ee0003f10] handle_irq_event_percpu at ffffffffbd0f4e02 #16 [ffff891ee0003f40] handle_irq_event at ffffffffbd0f4e90 #17 [ffff891ee0003f68] handle_edge_irq at ffffffffbd0f8984 #18 [ffff891ee0003f88] handle_irq at ffffffffbd0305d5 #19 [ffff891ee0003fb8] do_IRQ at ffffffffbda02a18 --- --- #20 [ffffffffbe403d30] ret_from_intr at ffffffffbda0094e [exception RIP: unknown or invalid address] RIP: 000000000000001f RSP: 0000000000000000 RFLAGS: fff3b8c2091ebb3f RAX: ffffbba5a0000200 RBX: 0000be8cdfa8f9fa RCX: 0000000000000018 RDX: 0000000000000101 RSI: 000000000000015d RDI: 0000000000000193 RBP: 0000000000000083 R8: ffffffffbe403e38 R9: 0000000000000002 R10: 0000000000000000 R11: ffffffffbe56b820 R12: ffff891ee001cf00 R13: ffffffffbd11c0a4 R14: ffffffffbe403d60 R15: 0000000000000001 ORIG_RAX: ffff891ee0022ac0 CS: 0000 SS: ffffffffffffffb9 bt: WARNING: possibly bogus exception frame #21 [ffffffffbe403dd8] cpuidle_enter_state at ffffffffbd67c6fd #22 [ffffffffbe403e40] cpuidle_enter at ffffffffbd67c907 #23 [ffffffffbe403e50] call_cpuidle at ffffffffbd0d98f3 #24 [ffffffffbe403e60] do_idle at ffffffffbd0d9b42 #25 [ffffffffbe403e98] cpu_startup_entry at ffffffffbd0d9da3 #26 [ffffffffbe403ec0] rest_init at ffffffffbd81d4aa #27 [ffffffffbe403ed0] start_kernel at ffffffffbe67d2ca #28 [ffffffffbe403f28] x86_64_start_reservations at ffffffffbe67c675 #29 [ffffffffbe403f38] x86_64_start_kernel at ffffffffbe67c6eb #30 [ffffffffbe403f50] secondary_startup_64 at ffffffffbd0000d5 Fixes: 040036bb0bc1 ("scsi: qla2xxx: Delay loop id allocation at login") Cc: # v4.17+ Signed-off-by: Chuck Anderson Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_init.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 7b675243bd16..db0e3279e07a 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -591,12 +591,14 @@ static void qla24xx_handle_gnl_done_event(scsi_qla_host_t *vha, conflict_fcport = qla2x00_find_fcport_by_wwpn(vha, e->port_name, 0); - ql_dbg(ql_dbg_disc, vha, 0x20e6, - "%s %d %8phC post del sess\n", - __func__, __LINE__, - conflict_fcport->port_name); - qlt_schedule_sess_for_deletion - (conflict_fcport); + if (conflict_fcport) { + qlt_schedule_sess_for_deletion + (conflict_fcport); + ql_dbg(ql_dbg_disc, vha, 0x20e6, + "%s %d %8phC post del sess\n", + __func__, __LINE__, + conflict_fcport->port_name); + } } /* FW already picked this loop id for another fcport */ -- cgit v1.2.3 From f13cff6c25bd8986627365346d123312ee7baa78 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Tue, 3 Jul 2018 15:23:58 +0900 Subject: scsi: sd_zbc: Fix variable type and bogus comment Fix the description of sd_zbc_check_zone_size() to correctly explain that the returned value is a number of device blocks, not bytes. Additionally, the 32 bits "ret" variable used in this function may truncate the 64 bits zone_blocks variable value upon return. To fix this, change "ret" type to s64. Fixes: ccce20fc79 ("sd_zbc: Avoid that resetting a zone fails sporadically") Signed-off-by: Damien Le Moal Cc: Bart Van Assche Cc: stable@kernel.org Reviewed-by: Hannes Reinecke Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/sd_zbc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c index a14fef11776e..2bf3bf73886e 100644 --- a/drivers/scsi/sd_zbc.c +++ b/drivers/scsi/sd_zbc.c @@ -391,7 +391,8 @@ static int sd_zbc_check_capacity(struct scsi_disk *sdkp, unsigned char *buf) * Check that all zones of the device are equal. The last zone can however * be smaller. The zone size must also be a power of two number of LBAs. * - * Returns the zone size in bytes upon success or an error code upon failure. + * Returns the zone size in number of blocks upon success or an error code + * upon failure. */ static s64 sd_zbc_check_zone_size(struct scsi_disk *sdkp) { @@ -401,7 +402,7 @@ static s64 sd_zbc_check_zone_size(struct scsi_disk *sdkp) unsigned char *rec; unsigned int buf_len; unsigned int list_length; - int ret; + s64 ret; u8 same; /* Get a buffer */ -- cgit v1.2.3 From 01d0e789a14aa735ddcfddd468ef06d4f917e06d Mon Sep 17 00:00:00 2001 From: Don Brace Date: Tue, 3 Jul 2018 17:34:48 -0500 Subject: scsi: hpsa: correct enclosure sas address The original complaint was the lsscsi -t showed the same SAS address of the two enclosures (SEP devices). In fact the SAS address was being set to the Enclosure Logical Identifier (ELI). Reviewed-by: Scott Teel Reviewed-by: Kevin Barnett Signed-off-by: Don Brace Signed-off-by: Martin K. Petersen --- drivers/scsi/hpsa.c | 25 +++++++++++++++++++++---- drivers/scsi/hpsa.h | 1 + 2 files changed, 22 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 15c7f3b6f35e..58bb70b886d7 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -3440,11 +3440,11 @@ static void hpsa_get_enclosure_info(struct ctlr_info *h, struct ext_report_lun_entry *rle = &rlep->LUN[rle_index]; u16 bmic_device_index = 0; - bmic_device_index = GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]); - - encl_dev->sas_address = + encl_dev->eli = hpsa_get_enclosure_logical_identifier(h, scsi3addr); + bmic_device_index = GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]); + if (encl_dev->target == -1 || encl_dev->lun == -1) { rc = IO_OK; goto out; @@ -9697,7 +9697,24 @@ hpsa_sas_get_linkerrors(struct sas_phy *phy) static int hpsa_sas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) { - *identifier = rphy->identify.sas_address; + struct Scsi_Host *shost = phy_to_shost(rphy); + struct ctlr_info *h; + struct hpsa_scsi_dev_t *sd; + + if (!shost) + return -ENXIO; + + h = shost_to_hba(shost); + + if (!h) + return -ENXIO; + + sd = hpsa_find_device_by_sas_rphy(h, rphy); + if (!sd) + return -ENXIO; + + *identifier = sd->eli; + return 0; } diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index fb9f5e7f8209..59e023696fff 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -68,6 +68,7 @@ struct hpsa_scsi_dev_t { #define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0" unsigned char device_id[16]; /* from inquiry pg. 0x83 */ u64 sas_address; + u64 eli; /* from report diags. */ unsigned char vendor[8]; /* bytes 8-15 of inquiry data */ unsigned char model[16]; /* bytes 16-31 of inquiry data */ unsigned char rev; /* byte 2 of inquiry data */ -- cgit v1.2.3 From 6ac174756dfc9884f08b23af840ca911155f5578 Mon Sep 17 00:00:00 2001 From: Saurav Kashyap Date: Thu, 5 Jul 2018 07:01:33 -0700 Subject: scsi: qedf: Send the driver state to MFW Need to notify firmware when driver is loaded and unloaded. Signed-off-by: Saurav Kashyap Signed-off-by: Chad Dupuis Signed-off-by: Martin K. Petersen --- drivers/scsi/qedf/qedf_main.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index 90394cef0f41..0a5dd5595dd3 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -3295,6 +3295,11 @@ static int __qedf_probe(struct pci_dev *pdev, int mode) init_completion(&qedf->flogi_compl); + status = qed_ops->common->update_drv_state(qedf->cdev, true); + if (status) + QEDF_ERR(&(qedf->dbg_ctx), + "Failed to send drv state to MFW.\n"); + memset(&link_params, 0, sizeof(struct qed_link_params)); link_params.link_up = true; status = qed_ops->common->set_link(qedf->cdev, &link_params); @@ -3343,6 +3348,7 @@ static int qedf_probe(struct pci_dev *pdev, const struct pci_device_id *id) static void __qedf_remove(struct pci_dev *pdev, int mode) { struct qedf_ctx *qedf; + int rc; if (!pdev) { QEDF_ERR(NULL, "pdev is NULL.\n"); @@ -3437,6 +3443,12 @@ static void __qedf_remove(struct pci_dev *pdev, int mode) qed_ops->common->set_power_state(qedf->cdev, PCI_D0); pci_set_drvdata(pdev, NULL); } + + rc = qed_ops->common->update_drv_state(qedf->cdev, false); + if (rc) + QEDF_ERR(&(qedf->dbg_ctx), + "Failed to send drv state to MFW.\n"); + qed_ops->common->slowpath_stop(qedf->cdev); qed_ops->common->remove(qedf->cdev); -- cgit v1.2.3 From a3440d0d2f57f7ba102fc332086961cf261180af Mon Sep 17 00:00:00 2001 From: Manish Rangankar Date: Mon, 2 Jul 2018 23:52:31 -0700 Subject: scsi: qedi: Send driver state to MFW In case of iSCSI offload BFS environment, MFW requires to mark virtual link based upon qedi load status. Signed-off-by: Manish Rangankar Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/qedi_main.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c index cf274a79e77a..091ec1207bea 100644 --- a/drivers/scsi/qedi/qedi_main.c +++ b/drivers/scsi/qedi/qedi_main.c @@ -2273,6 +2273,7 @@ kset_free: static void __qedi_remove(struct pci_dev *pdev, int mode) { struct qedi_ctx *qedi = pci_get_drvdata(pdev); + int rval; if (qedi->tmf_thread) { flush_workqueue(qedi->tmf_thread); @@ -2302,6 +2303,10 @@ static void __qedi_remove(struct pci_dev *pdev, int mode) if (mode == QEDI_MODE_NORMAL) qedi_free_iscsi_pf_param(qedi); + rval = qedi_ops->common->update_drv_state(qedi->cdev, false); + if (rval) + QEDI_ERR(&qedi->dbg_ctx, "Failed to send drv state to MFW\n"); + if (!test_bit(QEDI_IN_OFFLINE, &qedi->flags)) { qedi_ops->common->slowpath_stop(qedi->cdev); qedi_ops->common->remove(qedi->cdev); @@ -2576,6 +2581,12 @@ static int __qedi_probe(struct pci_dev *pdev, int mode) if (qedi_setup_boot_info(qedi)) QEDI_ERR(&qedi->dbg_ctx, "No iSCSI boot target configured\n"); + + rc = qedi_ops->common->update_drv_state(qedi->cdev, true); + if (rc) + QEDI_ERR(&qedi->dbg_ctx, + "Failed to send drv state to MFW\n"); + } return 0; -- cgit v1.2.3 From 943e59fe78ee870d86c775fc9fee2ab68bd262a3 Mon Sep 17 00:00:00 2001 From: Cédric Le Goater Date: Thu, 5 Jul 2018 07:26:23 +0200 Subject: scsi: cxlflash: fix assignment of the backend operations MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit cd43c221bb5e ("scsi: cxlflash: Isolate external module dependencies") introduced the use of ifdefs to avoid compilation errors when one of the possible backend driver, CXL or OCXL, is not compiled. Unfortunately, the wrong defines are used and the backend ops are never assigned, leading to a kernel crash in any case when the cxlflash module is loaded. Signed-off-by: Cédric Le Goater Acked-by: Matthew R. Ochs Signed-off-by: Martin K. Petersen --- drivers/scsi/cxlflash/main.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/cxlflash/main.h b/drivers/scsi/cxlflash/main.h index 2a3977823812..a39be94d110c 100644 --- a/drivers/scsi/cxlflash/main.h +++ b/drivers/scsi/cxlflash/main.h @@ -107,12 +107,12 @@ cxlflash_assign_ops(struct dev_dependent_vals *ddv) { const struct cxlflash_backend_ops *ops = NULL; -#ifdef CONFIG_OCXL +#ifdef CONFIG_OCXL_BASE if (ddv->flags & CXLFLASH_OCXL_DEV) ops = &cxlflash_ocxl_ops; #endif -#ifdef CONFIG_CXL +#ifdef CONFIG_CXL_BASE if (!(ddv->flags & CXLFLASH_OCXL_DEV)) ops = &cxlflash_cxl_ops; #endif -- cgit v1.2.3 From b4e7a7a88b5d060650094b8d3454bc521d669f6a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 8 Jun 2018 11:17:54 -0400 Subject: drm_mode_create_lease_ioctl(): fix open-coded filp_clone_open() Failure of ->open() should *not* be followed by fput(). Fixed by using filp_clone_open(), which gets the cleanups right. Cc: stable@vger.kernel.org Acked-by: Linus Torvalds Signed-off-by: Al Viro --- drivers/gpu/drm/drm_lease.c | 16 +--------------- fs/internal.h | 1 - include/linux/fs.h | 1 + 3 files changed, 2 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/drm_lease.c b/drivers/gpu/drm/drm_lease.c index 50c73c0a20b9..d638c0fb3418 100644 --- a/drivers/gpu/drm/drm_lease.c +++ b/drivers/gpu/drm/drm_lease.c @@ -553,24 +553,13 @@ int drm_mode_create_lease_ioctl(struct drm_device *dev, /* Clone the lessor file to create a new file for us */ DRM_DEBUG_LEASE("Allocating lease file\n"); - path_get(&lessor_file->f_path); - lessee_file = alloc_file(&lessor_file->f_path, - lessor_file->f_mode, - fops_get(lessor_file->f_inode->i_fop)); - + lessee_file = filp_clone_open(lessor_file); if (IS_ERR(lessee_file)) { ret = PTR_ERR(lessee_file); goto out_lessee; } - /* Initialize the new file for DRM */ - DRM_DEBUG_LEASE("Initializing the file with %p\n", lessee_file->f_op->open); - ret = lessee_file->f_op->open(lessee_file->f_inode, lessee_file); - if (ret) - goto out_lessee_file; - lessee_priv = lessee_file->private_data; - /* Change the file to a master one */ drm_master_put(&lessee_priv->master); lessee_priv->master = lessee; @@ -588,9 +577,6 @@ int drm_mode_create_lease_ioctl(struct drm_device *dev, DRM_DEBUG_LEASE("drm_mode_create_lease_ioctl succeeded\n"); return 0; -out_lessee_file: - fput(lessee_file); - out_lessee: drm_master_put(&lessee); diff --git a/fs/internal.h b/fs/internal.h index 980d005b21b4..5645b4ebf494 100644 --- a/fs/internal.h +++ b/fs/internal.h @@ -127,7 +127,6 @@ int do_fchownat(int dfd, const char __user *filename, uid_t user, gid_t group, extern int open_check_o_direct(struct file *f); extern int vfs_open(const struct path *, struct file *, const struct cred *); -extern struct file *filp_clone_open(struct file *); /* * inode.c diff --git a/include/linux/fs.h b/include/linux/fs.h index 5c91108846db..aa9b4c169ed2 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2422,6 +2422,7 @@ extern struct file *filp_open(const char *, int, umode_t); extern struct file *file_open_root(struct dentry *, struct vfsmount *, const char *, int, umode_t); extern struct file * dentry_open(const struct path *, int, const struct cred *); +extern struct file *filp_clone_open(struct file *); extern int filp_close(struct file *, fl_owner_t id); extern struct filename *getname_flags(const char __user *, int, int *); -- cgit v1.2.3 From d202797f480c0e5918e7642d6716cdc62b3ab5c9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 9 Jun 2018 09:43:13 -0400 Subject: cxl_getfile(): fix double-iput() on alloc_file() failures Doing iput() after path_put() is wrong. Cc: stable@vger.kernel.org Acked-by: Linus Torvalds Signed-off-by: Al Viro --- drivers/misc/cxl/api.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/misc/cxl/api.c b/drivers/misc/cxl/api.c index 753b1a698fc4..6b16946f9b05 100644 --- a/drivers/misc/cxl/api.c +++ b/drivers/misc/cxl/api.c @@ -103,15 +103,15 @@ static struct file *cxl_getfile(const char *name, d_instantiate(path.dentry, inode); file = alloc_file(&path, OPEN_FMODE(flags), fops); - if (IS_ERR(file)) - goto err_dput; + if (IS_ERR(file)) { + path_put(&path); + goto err_fs; + } file->f_flags = flags & (O_ACCMODE | O_NONBLOCK); file->private_data = priv; return file; -err_dput: - path_put(&path); err_inode: iput(inode); err_fs: -- cgit v1.2.3 From c7e9075fb89362812059fbf8e25bb4a6e825c4c5 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 17 Jun 2018 12:38:17 -0400 Subject: ocxlflash_getfile(): fix double-iput() on alloc_file() failures Cc: stable@vger.kernel.org Acked-by: Linus Torvalds Signed-off-by: Al Viro --- drivers/scsi/cxlflash/ocxl_hw.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/cxlflash/ocxl_hw.c b/drivers/scsi/cxlflash/ocxl_hw.c index 0a95b5f25380..497a68389461 100644 --- a/drivers/scsi/cxlflash/ocxl_hw.c +++ b/drivers/scsi/cxlflash/ocxl_hw.c @@ -134,15 +134,14 @@ static struct file *ocxlflash_getfile(struct device *dev, const char *name, rc = PTR_ERR(file); dev_err(dev, "%s: alloc_file failed rc=%d\n", __func__, rc); - goto err5; + path_put(&path); + goto err3; } file->f_flags = flags & (O_ACCMODE | O_NONBLOCK); file->private_data = priv; out: return file; -err5: - path_put(&path); err4: iput(inode); err3: -- cgit v1.2.3 From cea394772d3c41d04cb71a032f6ed878392bd134 Mon Sep 17 00:00:00 2001 From: Vladimir Murzin Date: Mon, 18 Jun 2018 14:33:03 +0100 Subject: ARM: 8775/1: NOMMU: Use instr_sync instead of plain isb in common code Greg reported that commit 3c24121039c9d ("ARM: 8756/1: NOMMU: Postpone MPU activation till __after_proc_init") is causing breakage for the old Versatile platform in no-MMU mode (with out-of-tree patches): AS arch/arm/kernel/head-nommu.o arch/arm/kernel/head-nommu.S: Assembler messages: arch/arm/kernel/head-nommu.S:180: Error: selected processor does not support `isb' in ARM mode scripts/Makefile.build:417: recipe for target 'arch/arm/kernel/head-nommu.o' failed make[2]: *** [arch/arm/kernel/head-nommu.o] Error 1 Makefile:1034: recipe for target 'arch/arm/kernel' failed make[1]: *** [arch/arm/kernel] Error 2 Since the code is common for all NOMMU builds usage of the isb was a bad idea (please, note that isb also used in MPU related code which is fine because MPU has dependency on CPU_V7/CPU_V7M), instead use more robust instr_sync assembler macro. Fixes: 3c24121039c9 ("ARM: 8756/1: NOMMU: Postpone MPU activation till __after_proc_init") Reported-by: Greg Ungerer Tested-by: Greg Ungerer Signed-off-by: Vladimir Murzin Signed-off-by: Russell King --- arch/arm/kernel/head-nommu.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index dd546d65a383..7a9b86978ee1 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -177,7 +177,7 @@ M_CLASS(streq r3, [r12, #PMSAv8_MAIR1]) bic r0, r0, #CR_I #endif mcr p15, 0, r0, c1, c0, 0 @ write control reg - isb + instr_sync #elif defined (CONFIG_CPU_V7M) #ifdef CONFIG_ARM_MPU ldreq r3, [r12, MPU_CTRL] -- cgit v1.2.3 From e296701800f30d260a66f8aa1971b5b1bc3d2f81 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 11 Jul 2018 11:02:35 +0200 Subject: efi/x86: Fix mixed mode reboot loop by removing pointless call to PciIo->Attributes() Hans de Goede reported that his mixed EFI mode Bay Trail tablet would not boot at all any more, but enter a reboot loop without any logs printed by the kernel. Unbreak 64-bit Linux/x86 on 32-bit UEFI: When it was first introduced, the EFI stub code that copies the contents of PCI option ROMs originally only intended to do so if the EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM attribute was *not* set. The reason was that the UEFI spec permits PCI option ROM images to be provided by the platform directly, rather than via the ROM BAR, and in this case, the OS can only access them at runtime if they are preserved at boot time by copying them from the areas described by PciIo->RomImage and PciIo->RomSize. However, it implemented this check erroneously, as can be seen in commit: dd5fc854de5fd ("EFI: Stash ROMs if they're not in the PCI BAR") which introduced: if (!attributes & EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM) continue; and given that the numeric value of EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM is 0x4000, this condition never becomes true, and so the option ROMs were copied unconditionally. This was spotted and 'fixed' by commit: 886d751a2ea99a160 ("x86, efi: correct precedence of operators in setup_efi_pci") but inadvertently inverted the logic at the same time, defeating the purpose of the code, since it now only preserves option ROM images that can be read from the ROM BAR as well. Unsurprisingly, this broke some systems, and so the check was removed entirely in the following commit: 739701888f5d ("x86, efi: remove attribute check from setup_efi_pci") It is debatable whether this check should have been included in the first place, since the option ROM image provided to the UEFI driver by the firmware may be different from the one that is actually present in the card's flash ROM, and so whatever PciIo->RomImage points at should be preferred regardless of whether the attribute is set. As this was the only use of the attributes field, we can remove the call to PciIo->Attributes() entirely, which is especially nice because its prototype involves uint64_t type by-value arguments which the EFI mixed mode has trouble dealing with. Any mixed mode system with PCI is likely to be affected. Tested-by: Wilfried Klaebe Tested-by: Hans de Goede Signed-off-by: Ard Biesheuvel Cc: Linus Torvalds Cc: Matt Fleming Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711090235.9327-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar --- arch/x86/boot/compressed/eboot.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index e57665b4ba1c..e98522ea6f09 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -114,18 +114,12 @@ __setup_efi_pci(efi_pci_io_protocol_t *pci, struct pci_setup_rom **__rom) struct pci_setup_rom *rom = NULL; efi_status_t status; unsigned long size; - uint64_t attributes, romsize; + uint64_t romsize; void *romimage; - status = efi_call_proto(efi_pci_io_protocol, attributes, pci, - EfiPciIoAttributeOperationGet, 0ULL, - &attributes); - if (status != EFI_SUCCESS) - return status; - /* - * Some firmware images contain EFI function pointers at the place where the - * romimage and romsize fields are supposed to be. Typically the EFI + * Some firmware images contain EFI function pointers at the place where + * the romimage and romsize fields are supposed to be. Typically the EFI * code is mapped at high addresses, translating to an unrealistically * large romsize. The UEFI spec limits the size of option ROMs to 16 * MiB so we reject any ROMs over 16 MiB in size to catch this. -- cgit v1.2.3 From 877cc639686b68c7de179a485544f4761e376b30 Mon Sep 17 00:00:00 2001 From: Jeremy Cline Date: Tue, 8 May 2018 21:27:43 +0000 Subject: perf tools: Generate a Python script compatible with Python 2 and 3 When generating a Python script with "perf script -g python", produce one that is compatible with Python 2 and 3. The difference between the two generated scripts is: --- python2-perf-script.py 2018-05-08 15:35:00.865889705 -0400 +++ python3-perf-script.py 2018-05-08 15:34:49.019789564 -0400 @@ -7,6 +7,8 @@ # be retrieved using Python functions of the form common_*(context). # See the perf-script-python Documentation for the list of available functions. +from __future__ import print_function + import os import sys @@ -18,10 +20,10 @@ def trace_begin(): - print "in trace_begin" + print("in trace_begin") def trace_end(): - print "in trace_end" + print("in trace_end") def raw_syscalls__sys_enter(event_name, context, common_cpu, common_secs, common_nsecs, common_pid, common_comm, @@ -29,26 +31,26 @@ print_header(event_name, common_cpu, common_secs, common_nsecs, common_pid, common_comm) - print "id=%d, args=%s" % \ - (id, args) + print("id=%d, args=%s" % \ + (id, args)) - print 'Sample: {'+get_dict_as_string(perf_sample_dict['sample'], ', ')+'}' + print('Sample: {'+get_dict_as_string(perf_sample_dict['sample'], ', ')+'}') for node in common_callchain: if 'sym' in node: - print "\t[%x] %s" % (node['ip'], node['sym']['name']) + print("\t[%x] %s" % (node['ip'], node['sym']['name'])) else: - print " [%x]" % (node['ip']) + print(" [%x]" % (node['ip'])) - print "\n" + print() def trace_unhandled(event_name, context, event_fields_dict, perf_sample_dict): - print get_dict_as_string(event_fields_dict) - print 'Sample: {'+get_dict_as_string(perf_sample_dict['sample'], ', ')+'}' + print(get_dict_as_string(event_fields_dict)) + print('Sample: {'+get_dict_as_string(perf_sample_dict['sample'], ', ')+'}') def print_header(event_name, cpu, secs, nsecs, pid, comm): - print "%-20s %5u %05u.%09u %8u %-20s " % \ - (event_name, cpu, secs, nsecs, pid, comm), + print("%-20s %5u %05u.%09u %8u %-20s " % \ + (event_name, cpu, secs, nsecs, pid, comm), end="") def get_dict_as_string(a_dict, delimiter=' '): return delimiter.join(['%s=%s'%(k,str(v))for k,v in sorted(a_dict.items())]) Signed-off-by: Jeremy Cline Cc: Alexander Shishkin Cc: Herton Krzesinski Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/0100016341a7278a-d178c724-2b0f-49ca-be93-80a7d51aaa0d-000000@email.amazonses.com Signed-off-by: Arnaldo Carvalho de Melo --- .../util/scripting-engines/trace-event-python.c | 29 +++++++++++----------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/tools/perf/util/scripting-engines/trace-event-python.c b/tools/perf/util/scripting-engines/trace-event-python.c index 46e9e19ab1ac..8b2eb6dbff4d 100644 --- a/tools/perf/util/scripting-engines/trace-event-python.c +++ b/tools/perf/util/scripting-engines/trace-event-python.c @@ -1627,6 +1627,7 @@ static int python_generate_script(struct pevent *pevent, const char *outfile) fprintf(ofp, "# See the perf-script-python Documentation for the list " "of available functions.\n\n"); + fprintf(ofp, "from __future__ import print_function\n\n"); fprintf(ofp, "import os\n"); fprintf(ofp, "import sys\n\n"); @@ -1636,10 +1637,10 @@ static int python_generate_script(struct pevent *pevent, const char *outfile) fprintf(ofp, "from Core import *\n\n\n"); fprintf(ofp, "def trace_begin():\n"); - fprintf(ofp, "\tprint \"in trace_begin\"\n\n"); + fprintf(ofp, "\tprint(\"in trace_begin\")\n\n"); fprintf(ofp, "def trace_end():\n"); - fprintf(ofp, "\tprint \"in trace_end\"\n\n"); + fprintf(ofp, "\tprint(\"in trace_end\")\n\n"); while ((event = trace_find_next_event(pevent, event))) { fprintf(ofp, "def %s__%s(", event->system, event->name); @@ -1675,7 +1676,7 @@ static int python_generate_script(struct pevent *pevent, const char *outfile) "common_secs, common_nsecs,\n\t\t\t" "common_pid, common_comm)\n\n"); - fprintf(ofp, "\t\tprint \""); + fprintf(ofp, "\t\tprint(\""); not_first = 0; count = 0; @@ -1736,31 +1737,31 @@ static int python_generate_script(struct pevent *pevent, const char *outfile) fprintf(ofp, "%s", f->name); } - fprintf(ofp, ")\n\n"); + fprintf(ofp, "))\n\n"); - fprintf(ofp, "\t\tprint 'Sample: {'+" - "get_dict_as_string(perf_sample_dict['sample'], ', ')+'}'\n\n"); + fprintf(ofp, "\t\tprint('Sample: {'+" + "get_dict_as_string(perf_sample_dict['sample'], ', ')+'}')\n\n"); fprintf(ofp, "\t\tfor node in common_callchain:"); fprintf(ofp, "\n\t\t\tif 'sym' in node:"); - fprintf(ofp, "\n\t\t\t\tprint \"\\t[%%x] %%s\" %% (node['ip'], node['sym']['name'])"); + fprintf(ofp, "\n\t\t\t\tprint(\"\\t[%%x] %%s\" %% (node['ip'], node['sym']['name']))"); fprintf(ofp, "\n\t\t\telse:"); - fprintf(ofp, "\n\t\t\t\tprint \"\t[%%x]\" %% (node['ip'])\n\n"); - fprintf(ofp, "\t\tprint \"\\n\"\n\n"); + fprintf(ofp, "\n\t\t\t\tprint(\"\t[%%x]\" %% (node['ip']))\n\n"); + fprintf(ofp, "\t\tprint()\n\n"); } fprintf(ofp, "def trace_unhandled(event_name, context, " "event_fields_dict, perf_sample_dict):\n"); - fprintf(ofp, "\t\tprint get_dict_as_string(event_fields_dict)\n"); - fprintf(ofp, "\t\tprint 'Sample: {'+" - "get_dict_as_string(perf_sample_dict['sample'], ', ')+'}'\n\n"); + fprintf(ofp, "\t\tprint(get_dict_as_string(event_fields_dict))\n"); + fprintf(ofp, "\t\tprint('Sample: {'+" + "get_dict_as_string(perf_sample_dict['sample'], ', ')+'}')\n\n"); fprintf(ofp, "def print_header(" "event_name, cpu, secs, nsecs, pid, comm):\n" - "\tprint \"%%-20s %%5u %%05u.%%09u %%8u %%-20s \" %% \\\n\t" - "(event_name, cpu, secs, nsecs, pid, comm),\n\n"); + "\tprint(\"%%-20s %%5u %%05u.%%09u %%8u %%-20s \" %% \\\n\t" + "(event_name, cpu, secs, nsecs, pid, comm), end=\"\")\n\n"); fprintf(ofp, "def get_dict_as_string(a_dict, delimiter=' '):\n" "\treturn delimiter.join" -- cgit v1.2.3 From 770d2f86c0051d4f2c0ab9d74d68434cb383241d Mon Sep 17 00:00:00 2001 From: Jeremy Cline Date: Tue, 8 May 2018 21:27:45 +0000 Subject: perf scripts python: Add Python 3 support to Core.py Support both Python 2 and Python 3 in Core.py. This should have no functional change. Signed-off-by: Jeremy Cline Cc: Alexander Shishkin Cc: Herton Krzesinski Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/0100016341a72ebe-e572899e-f445-4765-98f0-c314935727f9-000000@email.amazonses.com Signed-off-by: Arnaldo Carvalho de Melo --- .../python/Perf-Trace-Util/lib/Perf/Trace/Core.py | 40 +++++++++------------- 1 file changed, 17 insertions(+), 23 deletions(-) diff --git a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Core.py b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Core.py index 38dfb720fb6f..54ace2f6bc36 100644 --- a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Core.py +++ b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Core.py @@ -31,10 +31,8 @@ def flag_str(event_name, field_name, value): string = "" if flag_fields[event_name][field_name]: - print_delim = 0 - keys = flag_fields[event_name][field_name]['values'].keys() - keys.sort() - for idx in keys: + print_delim = 0 + for idx in sorted(flag_fields[event_name][field_name]['values']): if not value and not idx: string += flag_fields[event_name][field_name]['values'][idx] break @@ -51,14 +49,12 @@ def symbol_str(event_name, field_name, value): string = "" if symbolic_fields[event_name][field_name]: - keys = symbolic_fields[event_name][field_name]['values'].keys() - keys.sort() - for idx in keys: + for idx in sorted(symbolic_fields[event_name][field_name]['values']): if not value and not idx: - string = symbolic_fields[event_name][field_name]['values'][idx] + string = symbolic_fields[event_name][field_name]['values'][idx] break - if (value == idx): - string = symbolic_fields[event_name][field_name]['values'][idx] + if (value == idx): + string = symbolic_fields[event_name][field_name]['values'][idx] break return string @@ -74,19 +70,17 @@ def trace_flag_str(value): string = "" print_delim = 0 - keys = trace_flags.keys() - - for idx in keys: - if not value and not idx: - string += "NONE" - break - - if idx and (value & idx) == idx: - if print_delim: - string += " | "; - string += trace_flags[idx] - print_delim = 1 - value &= ~idx + for idx in trace_flags: + if not value and not idx: + string += "NONE" + break + + if idx and (value & idx) == idx: + if print_delim: + string += " | "; + string += trace_flags[idx] + print_delim = 1 + value &= ~idx return string -- cgit v1.2.3 From 2ab89262ff8895b8476b97345507c676fe3081fa Mon Sep 17 00:00:00 2001 From: Jeremy Cline Date: Tue, 8 May 2018 21:27:45 +0000 Subject: perf scripts python: Add Python 3 support to SchedGui.py Fix a single syntax error in SchedGui.py to support both Python 2 and Python 3. This should have no functional change. Signed-off-by: Jeremy Cline Cc: Alexander Shishkin Cc: Herton Krzesinski Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/0100016341a72d26-75729663-fe55-4309-8c9b-302e065ed2f1-000000@email.amazonses.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/SchedGui.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/SchedGui.py b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/SchedGui.py index fdd92f699055..cac7b2542ee8 100644 --- a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/SchedGui.py +++ b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/SchedGui.py @@ -11,7 +11,7 @@ try: import wx except ImportError: - raise ImportError, "You need to install the wxpython lib for this script" + raise ImportError("You need to install the wxpython lib for this script") class RootFrame(wx.Frame): -- cgit v1.2.3 From c45b168effb12719f6dfc8d2c20ba8c057e8c16b Mon Sep 17 00:00:00 2001 From: Jeremy Cline Date: Tue, 8 May 2018 21:27:46 +0000 Subject: perf scripts python: Add Python 3 support to Util.py Support both Python 2 and Python 3 in Util.py. The dict class no longer has a ``has_key`` method and print is now a function rather than a statement. This should have no functional change. Signed-off-by: Jeremy Cline Cc: Alexander Shishkin Cc: Herton Krzesinski Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/0100016341a730c6-8db8b9b1-da2d-4ee3-96bf-47e0ae9796bd-000000@email.amazonses.com Signed-off-by: Arnaldo Carvalho de Melo --- .../scripts/python/Perf-Trace-Util/lib/Perf/Trace/Util.py | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Util.py b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Util.py index f6c84966e4f8..7384dcb628c4 100644 --- a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Util.py +++ b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Util.py @@ -5,6 +5,7 @@ # This software may be distributed under the terms of the GNU General # Public License ("GPL") version 2 as published by the Free Software # Foundation. +from __future__ import print_function import errno, os @@ -33,7 +34,7 @@ def nsecs_str(nsecs): return str def add_stats(dict, key, value): - if not dict.has_key(key): + if key not in dict: dict[key] = (value, value, value, 1) else: min, max, avg, count = dict[key] @@ -72,10 +73,10 @@ try: except: if not audit_package_warned: audit_package_warned = True - print "Install the audit-libs-python package to get syscall names.\n" \ - "For example:\n # apt-get install python-audit (Ubuntu)" \ - "\n # yum install audit-libs-python (Fedora)" \ - "\n etc.\n" + print("Install the audit-libs-python package to get syscall names.\n" + "For example:\n # apt-get install python-audit (Ubuntu)" + "\n # yum install audit-libs-python (Fedora)" + "\n etc.\n") def syscall_name(id): try: -- cgit v1.2.3 From 8c1c1ab2d2a77cb50841822168e56d11c4ebfd6e Mon Sep 17 00:00:00 2001 From: Jeremy Cline Date: Tue, 8 May 2018 21:27:47 +0000 Subject: perf scripts python: Add Python 3 support to sched-migration.py Support both Python 2 and Python 3 in the sched-migration.py script. This should have no functional change. Signed-off-by: Jeremy Cline Cc: Alexander Shishkin Cc: Herton Krzesinski Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/0100016341a737a5-44ec436f-3440-4cac-a03f-ddfa589bf308-000000@email.amazonses.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/scripts/python/sched-migration.py | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/tools/perf/scripts/python/sched-migration.py b/tools/perf/scripts/python/sched-migration.py index de66cb3b72c9..3473e7f66081 100644 --- a/tools/perf/scripts/python/sched-migration.py +++ b/tools/perf/scripts/python/sched-migration.py @@ -9,13 +9,17 @@ # This software is distributed under the terms of the GNU General # Public License ("GPL") version 2 as published by the Free Software # Foundation. - +from __future__ import print_function import os import sys from collections import defaultdict -from UserList import UserList +try: + from UserList import UserList +except ImportError: + # Python 3: UserList moved to the collections package + from collections import UserList sys.path.append(os.environ['PERF_EXEC_PATH'] + \ '/scripts/python/Perf-Trace-Util/lib/Perf/Trace') @@ -300,7 +304,7 @@ class TimeSliceList(UserList): if i == -1: return - for i in xrange(i, len(self.data)): + for i in range(i, len(self.data)): timeslice = self.data[i] if timeslice.start > end: return @@ -336,8 +340,8 @@ class SchedEventProxy: on_cpu_task = self.current_tsk[headers.cpu] if on_cpu_task != -1 and on_cpu_task != prev_pid: - print "Sched switch event rejected ts: %s cpu: %d prev: %s(%d) next: %s(%d)" % \ - (headers.ts_format(), headers.cpu, prev_comm, prev_pid, next_comm, next_pid) + print("Sched switch event rejected ts: %s cpu: %d prev: %s(%d) next: %s(%d)" % \ + headers.ts_format(), headers.cpu, prev_comm, prev_pid, next_comm, next_pid) threads[prev_pid] = prev_comm threads[next_pid] = next_comm -- cgit v1.2.3 From 12aa6c7389a321b4b5d921f89c3f83b9750598f7 Mon Sep 17 00:00:00 2001 From: Jeremy Cline Date: Tue, 8 May 2018 21:27:48 +0000 Subject: perf scripts python: Add Python 3 support to EventClass.py Support both Python 2 and Python 3 in EventClass.py. ``print`` is now a function rather than a statement. This should have no functional change. Signed-off-by: Jeremy Cline Cc: Alexander Shishkin Cc: Herton Krzesinski Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/0100016341a73aac-e0734bdc-dcab-4c61-8333-d8be97524aa0-000000@email.amazonses.com Signed-off-by: Arnaldo Carvalho de Melo --- .../perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/EventClass.py | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/EventClass.py b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/EventClass.py index 81a56cd2b3c1..21a7a1298094 100755 --- a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/EventClass.py +++ b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/EventClass.py @@ -8,6 +8,7 @@ # PerfEvent is the base class for all perf event sample, PebsEvent # is a HW base Intel x86 PEBS event, and user could add more SW/HW # event classes based on requirements. +from __future__ import print_function import struct @@ -44,7 +45,8 @@ class PerfEvent(object): PerfEvent.event_num += 1 def show(self): - print "PMU event: name=%12s, symbol=%24s, comm=%8s, dso=%12s" % (self.name, self.symbol, self.comm, self.dso) + print("PMU event: name=%12s, symbol=%24s, comm=%8s, dso=%12s" % + (self.name, self.symbol, self.comm, self.dso)) # # Basic Intel PEBS (Precise Event-based Sampling) event, whose raw buffer -- cgit v1.2.3 From 508ef3e737bbb9858a30e7bb153507429ea89644 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 29 Jun 2018 12:46:33 -0500 Subject: perf test shell: Replace '|&' with '2>&1 |' to work with more shells Since we do not specify bash (and/or zsh) as a requirement, use the standard error redirection that is more widely supported. BEFORE: $ sudo perf test -v 62 62: Check open filename arg using perf trace + vfs_getname: --- start --- test child forked, pid 27305 ./tests/shell/trace+probe_vfs_getname.sh: 20: ./tests/shell/trace+probe_vfs_getname.sh: Syntax error: "&" unexpected test child finished with -2 ---- end ---- Check open filename arg using perf trace + vfs_getname: Skip AFTER: $ sudo perf test -v 62 64: Check open filename arg using perf trace + vfs_getname : --- start --- test child forked, pid 23008 Added new event: probe:vfs_getname (on getname_flags:72 with pathname=result->name:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 0.361 ( 0.008 ms): touch/23032 openat(dfd: CWD, filename: /tmp/temporary_file.VEh0n, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 4 test child finished with 0 ---- end ---- Check open filename arg using perf trace + vfs_getname: Ok Similar to commit 35435cd06081, with the same title. Signed-off-by: Kim Phillips Cc: Alexander Shishkin Cc: Hendrik Brueckner Cc: Jiri Olsa Cc: Michael Petlan Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Sandipan Das Cc: Thomas Richter Link: http://lkml.kernel.org/r/20180629124633.0a9f4bea54b8d2c28f265de2@arm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/shell/trace+probe_vfs_getname.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/tests/shell/trace+probe_vfs_getname.sh b/tools/perf/tests/shell/trace+probe_vfs_getname.sh index 55ad9793d544..4ce276efe6b4 100755 --- a/tools/perf/tests/shell/trace+probe_vfs_getname.sh +++ b/tools/perf/tests/shell/trace+probe_vfs_getname.sh @@ -17,7 +17,7 @@ skip_if_no_perf_probe || exit 2 file=$(mktemp /tmp/temporary_file.XXXXX) trace_open_vfs_getname() { - evts=$(echo $(perf list syscalls:sys_enter_open* |& egrep 'open(at)? ' | sed -r 's/.*sys_enter_([a-z]+) +\[.*$/\1/') | sed 's/ /,/') + evts=$(echo $(perf list syscalls:sys_enter_open* 2>&1 | egrep 'open(at)? ' | sed -r 's/.*sys_enter_([a-z]+) +\[.*$/\1/') | sed 's/ /,/') perf trace -e $evts touch $file 2>&1 | \ egrep " +[0-9]+\.[0-9]+ +\( +[0-9]+\.[0-9]+ ms\): +touch\/[0-9]+ open(at)?\((dfd: +CWD, +)?filename: +${file}, +flags: CREAT\|NOCTTY\|NONBLOCK\|WRONLY, +mode: +IRUGO\|IWUGO\) += +[0-9]+$" } -- cgit v1.2.3 From 98c6c8a1d00fba66625311730f80c6ceaa9c1d19 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 29 Jun 2018 12:46:43 -0500 Subject: perf test shell: Make perf's inet_pton test more portable Debian based systems such as Ubuntu have dash as their default shell. Even if the normal or root user's shell is bash, certain scripts still call /bin/sh, which points to dash, so we fix this perf test by rewriting it in a more portable way. BEFORE: $ sudo perf test -v 64 64: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 31942 ./tests/shell/record+probe_libc_inet_pton.sh: 18: ./tests/shell/record+probe_libc_inet_pton.sh: expected[0]=ping[][0-9 \.:]+probe_libc:inet_pton: \([[:xdigit:]]+\): not found ./tests/shell/record+probe_libc_inet_pton.sh: 19: ./tests/shell/record+probe_libc_inet_pton.sh: expected[1]=.*inet_pton\+0x[[:xdigit:]]+[[:space:]]\(/lib/x86_64-linux-gnu/libc-2.27.so|inlined\)$: not found ./tests/shell/record+probe_libc_inet_pton.sh: 29: ./tests/shell/record+probe_libc_inet_pton.sh: expected[2]=getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/lib/x86_64-linux-gnu/libc-2.27.so\)$: not found ./tests/shell/record+probe_libc_inet_pton.sh: 30: ./tests/shell/record+probe_libc_inet_pton.sh: expected[3]=.*\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$: not found ping 31963 [004] 83577.670613: probe_libc:inet_pton: (7fe15f87f4b0) ./tests/shell/record+probe_libc_inet_pton.sh: 39: ./tests/shell/record+probe_libc_inet_pton.sh: Bad substitution ./tests/shell/record+probe_libc_inet_pton.sh: 41: ./tests/shell/record+probe_libc_inet_pton.sh: Bad substitution test child finished with -2 ---- end ---- probe libc's inet_pton & backtrace it with ping: Skip AFTER: $ sudo perf test -v 64 64: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 32277 ping 32295 [001] 83679.690020: probe_libc:inet_pton: (7ff244f504b0) 7ff244f504b0 __GI___inet_pton+0x0 (/lib/x86_64-linux-gnu/libc-2.27.so) 7ff244f14ce4 getaddrinfo+0x124 (/lib/x86_64-linux-gnu/libc-2.27.so) 556ac036b57d _init+0xb75 (/bin/ping) test child finished with 0 ---- end ---- probe libc's inet_pton & backtrace it with ping: Ok Signed-off-by: Kim Phillips Cc: Alexander Shishkin Cc: Hendrik Brueckner Cc: Jiri Olsa Cc: Michael Petlan Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Sandipan Das Cc: Thomas Richter Link: http://lkml.kernel.org/r/20180629124643.2089b3ce59960eba34e87b27@arm.com Signed-off-by: Arnaldo Carvalho de Melo --- .../tests/shell/record+probe_libc_inet_pton.sh | 37 ++++++++++++---------- 1 file changed, 21 insertions(+), 16 deletions(-) diff --git a/tools/perf/tests/shell/record+probe_libc_inet_pton.sh b/tools/perf/tests/shell/record+probe_libc_inet_pton.sh index 263057039693..94e513e62b34 100755 --- a/tools/perf/tests/shell/record+probe_libc_inet_pton.sh +++ b/tools/perf/tests/shell/record+probe_libc_inet_pton.sh @@ -14,35 +14,40 @@ libc=$(grep -w libc /proc/self/maps | head -1 | sed -r 's/.*[[:space:]](\/.*)/\1 nm -Dg $libc 2>/dev/null | fgrep -q inet_pton || exit 254 trace_libc_inet_pton_backtrace() { - idx=0 - expected[0]="ping[][0-9 \.:]+probe_libc:inet_pton: \([[:xdigit:]]+\)" - expected[1]=".*inet_pton\+0x[[:xdigit:]]+[[:space:]]\($libc|inlined\)$" + + expected=`mktemp -u /tmp/expected.XXX` + + echo "ping[][0-9 \.:]+probe_libc:inet_pton: \([[:xdigit:]]+\)" > $expected + echo ".*inet_pton\+0x[[:xdigit:]]+[[:space:]]\($libc|inlined\)$" >> $expected case "$(uname -m)" in s390x) eventattr='call-graph=dwarf,max-stack=4' - expected[2]="gaih_inet.*\+0x[[:xdigit:]]+[[:space:]]\($libc|inlined\)$" - expected[3]="(__GI_)?getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\($libc|inlined\)$" - expected[4]="main\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$" + echo "gaih_inet.*\+0x[[:xdigit:]]+[[:space:]]\($libc|inlined\)$" >> $expected + echo "(__GI_)?getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\($libc|inlined\)$" >> $expected + echo "main\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$" >> $expected ;; *) eventattr='max-stack=3' - expected[2]="getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\($libc\)$" - expected[3]=".*\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$" + echo "getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\($libc\)$" >> $expected + echo ".*\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$" >> $expected ;; esac - file=`mktemp -u /tmp/perf.data.XXX` + perf_data=`mktemp -u /tmp/perf.data.XXX` + perf_script=`mktemp -u /tmp/perf.script.XXX` + perf record -e probe_libc:inet_pton/$eventattr/ -o $perf_data ping -6 -c 1 ::1 > /dev/null 2>&1 + perf script -i $perf_data > $perf_script - perf record -e probe_libc:inet_pton/$eventattr/ -o $file ping -6 -c 1 ::1 > /dev/null 2>&1 - perf script -i $file | while read line ; do + exec 3<$perf_script + exec 4<$expected + while read line <&3 && read -r pattern <&4; do + [ -z "$pattern" ] && break echo $line - echo "$line" | egrep -q "${expected[$idx]}" + echo "$line" | egrep -q "$pattern" if [ $? -ne 0 ] ; then - printf "FAIL: expected backtrace entry %d \"%s\" got \"%s\"\n" $idx "${expected[$idx]}" "$line" + printf "FAIL: expected backtrace entry \"%s\" got \"%s\"\n" "$pattern" "$line" exit 1 fi - let idx+=1 - [ -z "${expected[$idx]}" ] && break done # If any statements are executed from this point onwards, @@ -58,6 +63,6 @@ skip_if_no_perf_probe && \ perf probe -q $libc inet_pton && \ trace_libc_inet_pton_backtrace err=$? -rm -f ${file} +rm -f ${perf_data} ${perf_script} ${expected} perf probe -q -d probe_libc:inet_pton exit $err -- cgit v1.2.3 From f6432b9f65001651412dbc3589d251534822d4ab Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 29 Jun 2018 12:46:52 -0500 Subject: perf llvm-utils: Remove bashism from kernel include fetch script Like system(), popen() calls /bin/sh, which may/may not be bash. Script when run on dash and encounters the line, yields: exit: Illegal number: -1 checkbashisms report on script content: possible bashism (exit|return with negative status code): exit -1 Remove the bashism and use the more portable non-zero failure status code 1. Signed-off-by: Kim Phillips Cc: Alexander Shishkin Cc: Hendrik Brueckner Cc: Jiri Olsa Cc: Michael Petlan Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Sandipan Das Cc: Thomas Richter Link: http://lkml.kernel.org/r/20180629124652.8d0af7e2281fd3fd8262cacc@arm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/llvm-utils.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/perf/util/llvm-utils.c b/tools/perf/util/llvm-utils.c index 976e658e38dc..5e94857dfca2 100644 --- a/tools/perf/util/llvm-utils.c +++ b/tools/perf/util/llvm-utils.c @@ -266,16 +266,16 @@ static const char *kinc_fetch_script = "#!/usr/bin/env sh\n" "if ! test -d \"$KBUILD_DIR\"\n" "then\n" -" exit -1\n" +" exit 1\n" "fi\n" "if ! test -f \"$KBUILD_DIR/include/generated/autoconf.h\"\n" "then\n" -" exit -1\n" +" exit 1\n" "fi\n" "TMPDIR=`mktemp -d`\n" "if test -z \"$TMPDIR\"\n" "then\n" -" exit -1\n" +" exit 1\n" "fi\n" "cat << EOF > $TMPDIR/Makefile\n" "obj-y := dummy.o\n" -- cgit v1.2.3 From db8fec583f250557ddd6def1505a6c466c9747aa Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 29 Jun 2018 12:46:58 -0500 Subject: perf test shell: Prevent temporary editor files from being considered test scripts Allows a perf shell test developer to concurrently edit and run their test scripts, avoiding perf test attempts to execute their editor temporary files, such as seen here: $ sudo taskset -c 0 ./perf test -vvvvvvvv -F 63 63: 0VIM 8.0 : --- start --- sh: 1: ./tests/shell/.record+probe_libc_inet_pton.sh.swp: Permission denied ---- end ---- 0VIM 8.0: FAILED! Signed-off-by: Kim Phillips Cc: Alexander Shishkin Cc: Hendrik Brueckner Cc: Jiri Olsa Cc: Michael Petlan Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Sandipan Das Cc: Thomas Richter Link: http://lkml.kernel.org/r/20180629124658.15a506b41fc4539c08eb9426@arm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/builtin-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/tests/builtin-test.c b/tools/perf/tests/builtin-test.c index 2bde505e2e7e..dd850a26d579 100644 --- a/tools/perf/tests/builtin-test.c +++ b/tools/perf/tests/builtin-test.c @@ -422,7 +422,7 @@ static const char *shell_test__description(char *description, size_t size, #define for_each_shell_test(dir, base, ent) \ while ((ent = readdir(dir)) != NULL) \ - if (!is_directory(base, ent)) + if (!is_directory(base, ent) && ent->d_name[0] != '.') static const char *shell_tests__dir(char *path, size_t size) { -- cgit v1.2.3 From a09603f851045b031e990d2d663958ccb49db525 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Mon, 2 Jul 2018 15:42:01 +0200 Subject: perf tools: Fix compilation errors on gcc8 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We are getting following warnings on gcc8 that break compilation: $ make CC jvmti/jvmti_agent.o jvmti/jvmti_agent.c: In function ‘jvmti_open’: jvmti/jvmti_agent.c:252:35: error: ‘/jit-’ directive output may be truncated \ writing 5 bytes into a region of size between 1 and 4096 [-Werror=format-truncation=] snprintf(dump_path, PATH_MAX, "%s/jit-%i.dump", jit_path, getpid()); There's no point in checking the result of snprintf call in jvmti_open, the following open call will fail in case the name is mangled or too long. Using tools/lib/ function scnprintf that touches the return value from the snprintf() calls and thus get rid of those warnings. $ make DEBUG=1 CC arch/x86/util/perf_regs.o arch/x86/util/perf_regs.c: In function ‘arch_sdt_arg_parse_op’: arch/x86/util/perf_regs.c:229:4: error: ‘strncpy’ output truncated before terminating nul copying 2 bytes from a string of the same length [-Werror=stringop-truncation] strncpy(prefix, "+0", 2); ^~~~~~~~~~~~~~~~~~~~~~~~ Using scnprintf instead of the strncpy (which we know is safe in here) to get rid of that warning. Signed-off-by: Jiri Olsa Cc: Alexander Shishkin Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20180702134202.17745-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/arch/x86/util/perf_regs.c | 2 +- tools/perf/jvmti/jvmti_agent.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/perf/arch/x86/util/perf_regs.c b/tools/perf/arch/x86/util/perf_regs.c index 4b2caf6d48e7..fead6b3b4206 100644 --- a/tools/perf/arch/x86/util/perf_regs.c +++ b/tools/perf/arch/x86/util/perf_regs.c @@ -226,7 +226,7 @@ int arch_sdt_arg_parse_op(char *old_op, char **new_op) else if (rm[2].rm_so != rm[2].rm_eo) prefix[0] = '+'; else - strncpy(prefix, "+0", 2); + scnprintf(prefix, sizeof(prefix), "+0"); } /* Rename register */ diff --git a/tools/perf/jvmti/jvmti_agent.c b/tools/perf/jvmti/jvmti_agent.c index 0c6d1002b524..ac1bcdc17dae 100644 --- a/tools/perf/jvmti/jvmti_agent.c +++ b/tools/perf/jvmti/jvmti_agent.c @@ -35,6 +35,7 @@ #include #include /* for gettid() */ #include +#include #include "jvmti_agent.h" #include "../util/jitdump.h" @@ -249,7 +250,7 @@ void *jvmti_open(void) /* * jitdump file name */ - snprintf(dump_path, PATH_MAX, "%s/jit-%i.dump", jit_path, getpid()); + scnprintf(dump_path, PATH_MAX, "%s/jit-%i.dump", jit_path, getpid()); fd = open(dump_path, O_CREAT|O_TRUNC|O_RDWR, 0666); if (fd == -1) -- cgit v1.2.3 From c818cc063089e78bc31845d1eb6a1f0bedee1eae Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Mon, 2 Jul 2018 15:42:02 +0200 Subject: perf stat: Fix --interval_clear option Currently we display extra header line, like: # perf stat -I 1000 -a --interval-clear # time counts unit events insn per cycle branch-misses of all branches 2.964917103 3855.349912 cpu-clock (msec) # 3.855 CPUs utilized 2.964917103 23,993 context-switches # 0.006 M/sec 2.964917103 1,301 cpu-migrations # 0.329 K/sec ... Fixing the condition and getting proper: # perf stat -I 1000 -a --interval-clear # time counts unit events 2.359048938 1432.492228 cpu-clock (msec) # 1.432 CPUs utilized 2.359048938 7,613 context-switches # 0.002 M/sec 2.359048938 419 cpu-migrations # 0.133 K/sec ... Signed-off-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Fixes: 9660e08ee8cb ("perf stat: Add --interval-clear option") Link: http://lkml.kernel.org/r/20180702134202.17745-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-stat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index 22547a490e1f..05be023c3f0e 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -1742,7 +1742,7 @@ static void print_interval(char *prefix, struct timespec *ts) } } - if ((num_print_interval == 0 && metric_only) || interval_clear) + if ((num_print_interval == 0 || interval_clear) && metric_only) print_metric_headers(" ", true); if (++num_print_interval == 25) num_print_interval = 0; -- cgit v1.2.3 From db0ba84c04ef2cf293aaada5ae97531127844d9d Mon Sep 17 00:00:00 2001 From: Janne Huttunen Date: Mon, 9 Jul 2018 13:59:50 +0300 Subject: perf script python: Fix dict reference counting The dictionaries are attached to the parameter tuple that steals the references and takes care of releasing them when appropriate. The code should not decrement the reference counts explicitly. E.g. if libpython has been built with reference debugging enabled, the superfluous DECREFs will trigger this error when running perf script: Fatal Python error: Objects/tupleobject.c:238 object at 0x7f10f2041b40 has negative ref count -1 Aborted (core dumped) If the reference debugging is not enabled, the superfluous DECREFs might cause the dict objects to be silently released while they are still in use. This may trigger various other assertions or just cause perf crashes and/or weird and unexpected data changes in the stored Python objects. Signed-off-by: Janne Huttunen Acked-by: Jiri Olsa Acked-by: Namhyung Kim Cc: Alexander Shishkin Cc: Andi Kleen Cc: Jaroslav Skarvada Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1531133990-17485-1-git-send-email-janne.huttunen@nokia.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/scripting-engines/trace-event-python.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/tools/perf/util/scripting-engines/trace-event-python.c b/tools/perf/util/scripting-engines/trace-event-python.c index 8b2eb6dbff4d..bc32e57d17be 100644 --- a/tools/perf/util/scripting-engines/trace-event-python.c +++ b/tools/perf/util/scripting-engines/trace-event-python.c @@ -908,14 +908,11 @@ static void python_process_tracepoint(struct perf_sample *sample, if (_PyTuple_Resize(&t, n) == -1) Py_FatalError("error resizing Python tuple"); - if (!dict) { + if (!dict) call_object(handler, t, handler_name); - } else { + else call_object(handler, t, default_handler_name); - Py_DECREF(dict); - } - Py_XDECREF(all_entries_dict); Py_DECREF(t); } @@ -1235,7 +1232,6 @@ static void python_process_general_event(struct perf_sample *sample, call_object(handler, t, handler_name); - Py_DECREF(dict); Py_DECREF(t); } -- cgit v1.2.3 From 32aa928a7b817140c84987b726d5014911808fa4 Mon Sep 17 00:00:00 2001 From: Jeremy Cline Date: Tue, 10 Jul 2018 11:46:12 -0400 Subject: perf tools: Use python-config --includes rather than --cflags Builds started failing in Fedora on Python 3.7 with: `.gnu.debuglto_.debug_macro' referenced in section `.gnu.debuglto_.debug_macro' of util/scripting-engines/trace-event-python.o: defined in discarded section In Fedora, Python 3.7 added -flto to the list of --cflags and since it was only applied to util/scripting-engines/trace-event-python.c and scripts/python/Perf-Trace-Util/Context.c, linking failed. It's not the first time the addition of flags has broken builds: commit c6707fdef7e2 ("perf tools: Fix up build in hardnened environments") appears to have fixed a similar problem. "python-config --includes" provides the proper -I flags and doesn't introduce additional CFLAGS. Signed-off-by: Jeremy Cline Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20180710154612.6285-1-jcline@redhat.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile.config | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config index b5ac356ba323..f5a3b402589e 100644 --- a/tools/perf/Makefile.config +++ b/tools/perf/Makefile.config @@ -207,8 +207,7 @@ ifdef PYTHON_CONFIG PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) --ldflags 2>/dev/null) PYTHON_EMBED_LDFLAGS := $(call strip-libs,$(PYTHON_EMBED_LDOPTS)) PYTHON_EMBED_LIBADD := $(call grep-libs,$(PYTHON_EMBED_LDOPTS)) -lutil - PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null) - PYTHON_EMBED_CCOPTS := $(filter-out -specs=%,$(PYTHON_EMBED_CCOPTS)) + PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --includes 2>/dev/null) FLAGS_PYTHON_EMBED := $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS) endif -- cgit v1.2.3 From 70dbcc2254fa2a9add74a122b9dac954c4736e01 Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Wed, 11 Jul 2018 10:46:03 -0400 Subject: bsg: fix bogus EINVAL on non-data commands Fix a regression introduced in Linux kernel 4.17 where sending a SCSI command that does not transfer data (such as TEST UNIT READY) via /dev/bsg/* results in EINVAL. Fixes: 17cb960f29c2 ("bsg: split handling of SCSI CDBs vs transport requeues") Cc: # 4.17+ Reviewed-by: Christoph Hellwig Signed-off-by: Tony Battersby Signed-off-by: Jens Axboe --- block/bsg.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/block/bsg.c b/block/bsg.c index 66602c489956..3da540faf673 100644 --- a/block/bsg.c +++ b/block/bsg.c @@ -267,8 +267,6 @@ bsg_map_hdr(struct request_queue *q, struct sg_io_v4 *hdr, fmode_t mode) } else if (hdr->din_xfer_len) { ret = blk_rq_map_user(q, rq, NULL, uptr64(hdr->din_xferp), hdr->din_xfer_len, GFP_KERNEL); - } else { - ret = blk_rq_map_user(q, rq, NULL, NULL, 0, GFP_KERNEL); } if (ret) -- cgit v1.2.3 From 2fd8eb4ad87104c54800ef3cea498c92eb15c78a Mon Sep 17 00:00:00 2001 From: Yandong Zhao Date: Wed, 11 Jul 2018 19:06:28 +0800 Subject: arm64: neon: Fix function may_use_simd() return error status It does not matter if the caller of may_use_simd() migrates to another cpu after the call, but it is still important that the kernel_neon_busy percpu instance that is read matches the cpu the task is running on at the time of the read. This means that raw_cpu_read() is not sufficient. kernel_neon_busy may appear true if the caller migrates during the execution of raw_cpu_read() and the next task to be scheduled in on the initial cpu calls kernel_neon_begin(). This patch replaces raw_cpu_read() with this_cpu_read() to protect against this race. Cc: Fixes: cb84d11e1625 ("arm64: neon: Remove support for nested or hardirq kernel-mode NEON") Acked-by: Ard Biesheuvel Reviewed-by: Dave Martin Reviewed-by: Mark Rutland Signed-off-by: Yandong Zhao Signed-off-by: Will Deacon --- arch/arm64/include/asm/simd.h | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/arch/arm64/include/asm/simd.h b/arch/arm64/include/asm/simd.h index fa8b3fe932e6..6495cc51246f 100644 --- a/arch/arm64/include/asm/simd.h +++ b/arch/arm64/include/asm/simd.h @@ -29,20 +29,15 @@ DECLARE_PER_CPU(bool, kernel_neon_busy); static __must_check inline bool may_use_simd(void) { /* - * The raw_cpu_read() is racy if called with preemption enabled. - * This is not a bug: kernel_neon_busy is only set when - * preemption is disabled, so we cannot migrate to another CPU - * while it is set, nor can we migrate to a CPU where it is set. - * So, if we find it clear on some CPU then we're guaranteed to - * find it clear on any CPU we could migrate to. - * - * If we are in between kernel_neon_begin()...kernel_neon_end(), - * the flag will be set, but preemption is also disabled, so we - * can't migrate to another CPU and spuriously see it become - * false. + * kernel_neon_busy is only set while preemption is disabled, + * and is clear whenever preemption is enabled. Since + * this_cpu_read() is atomic w.r.t. preemption, kernel_neon_busy + * cannot change under our feet -- if it's set we cannot be + * migrated, and if it's clear we cannot be migrated to a CPU + * where it is set. */ return !in_irq() && !irqs_disabled() && !in_nmi() && - !raw_cpu_read(kernel_neon_busy); + !this_cpu_read(kernel_neon_busy); } #else /* ! CONFIG_KERNEL_MODE_NEON */ -- cgit v1.2.3 From ee6581ceba7f8314b81b2f2a81f1cf3f67c679e2 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 11 Jul 2018 10:10:11 -0700 Subject: nfit: fix unchecked dereference in acpi_nfit_ctl Incremental patch to fix the unchecked dereference in acpi_nfit_ctl. Reported by Dan Carpenter: "acpi/nfit: fix cmd_rc for acpi_nfit_ctl to always return a value" from Jun 28, 2018, leads to the following Smatch complaint: drivers/acpi/nfit/core.c:578 acpi_nfit_ctl() warn: variable dereferenced before check 'cmd_rc' (see line 411) drivers/acpi/nfit/core.c 410 411 *cmd_rc = -EINVAL; ^^^^^^^^^^^^^^^^^^ Patch adds unchecked dereference. Fixes: c1985cefd844 ("acpi/nfit: fix cmd_rc for acpi_nfit_ctl to always return a value") Signed-off-by: Dave Jiang --- drivers/acpi/nfit/core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c index b8040fed2a69..7c479002e798 100644 --- a/drivers/acpi/nfit/core.c +++ b/drivers/acpi/nfit/core.c @@ -408,7 +408,8 @@ int acpi_nfit_ctl(struct nvdimm_bus_descriptor *nd_desc, struct nvdimm *nvdimm, const guid_t *guid; int rc, i; - *cmd_rc = -EINVAL; + if (cmd_rc) + *cmd_rc = -EINVAL; func = cmd; if (cmd == ND_CMD_CALL) { call_pkg = buf; @@ -519,7 +520,8 @@ int acpi_nfit_ctl(struct nvdimm_bus_descriptor *nd_desc, struct nvdimm *nvdimm, * If we return an error (like elsewhere) then caller wouldn't * be able to rely upon data returned to make calculation. */ - *cmd_rc = 0; + if (cmd_rc) + *cmd_rc = 0; return 0; } -- cgit v1.2.3 From 93312b6da4df31e4102ce5420e6217135a16c7ea Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 11 Jul 2018 10:42:20 -0700 Subject: ARC: mm: allow mprotect to make stack mappings executable mprotect(EXEC) was failing for stack mappings as default vm flags was missing MAYEXEC. This was triggered by glibc test suite nptl/tst-execstack testcase What is surprising is that despite running LTP for years on, we didn't catch this issue as it lacks a directed test case. gcc dejagnu tests with nested functions also requiring exec stack work fine though because they rely on the GNU_STACK segment spit out by compiler and handled in kernel elf loader. This glibc case is different as the stack is non exec to begin with and a dlopen of shared lib with GNU_STACK segment triggers the exec stack proceedings using a mprotect(PROT_EXEC) which was broken. CC: stable@vger.kernel.org Signed-off-by: Vineet Gupta --- arch/arc/include/asm/page.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h index 109baa06831c..09ddddf71cc5 100644 --- a/arch/arc/include/asm/page.h +++ b/arch/arc/include/asm/page.h @@ -105,7 +105,7 @@ typedef pte_t * pgtable_t; #define virt_addr_valid(kaddr) pfn_valid(virt_to_pfn(kaddr)) /* Default Permissions for stack/heaps pages (Non Executable) */ -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE) +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) #define WANT_PAGE_VIRTUAL 1 -- cgit v1.2.3 From 498e8bf51c633cc4496343e6113f340f8e9301ae Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Fri, 6 Jul 2018 23:50:06 +0300 Subject: sample: vfio-mdev: avoid deadlock in mdev_access() mdev_access() calls mbochs_get_page() with mdev_state->ops_lock held, while mbochs_get_page() locks the mutex by itself. It leads to unavoidable deadlock. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: Alex Williamson --- samples/vfio-mdev/mbochs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/samples/vfio-mdev/mbochs.c b/samples/vfio-mdev/mbochs.c index d5d5a499160c..2535c3677c7b 100644 --- a/samples/vfio-mdev/mbochs.c +++ b/samples/vfio-mdev/mbochs.c @@ -178,6 +178,8 @@ static const char *vbe_name(u32 index) return "(invalid)"; } +static struct page *__mbochs_get_page(struct mdev_state *mdev_state, + pgoff_t pgoff); static struct page *mbochs_get_page(struct mdev_state *mdev_state, pgoff_t pgoff); @@ -394,7 +396,7 @@ static ssize_t mdev_access(struct mdev_device *mdev, char *buf, size_t count, MBOCHS_MEMORY_BAR_OFFSET + mdev_state->memsize) { pos -= MBOCHS_MMIO_BAR_OFFSET; poff = pos & ~PAGE_MASK; - pg = mbochs_get_page(mdev_state, pos >> PAGE_SHIFT); + pg = __mbochs_get_page(mdev_state, pos >> PAGE_SHIFT); map = kmap(pg); if (is_write) memcpy(map + poff, buf, count); -- cgit v1.2.3 From 0fc8c3581dd42bc8f530314ca86db2d861485731 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Mon, 9 Jul 2018 16:19:06 +0200 Subject: tracing/kprobe: Release kprobe print_fmt properly We don't release tk->tp.call.print_fmt when destroying local uprobe. Also there's missing print_fmt kfree in create_local_trace_kprobe error path. Link: http://lkml.kernel.org/r/20180709141906.2390-1-jolsa@kernel.org Cc: stable@vger.kernel.org Fixes: e12f03d7031a ("perf/core: Implement the 'perf_kprobe' PMU") Acked-by: Song Liu Acked-by: Masami Hiramatsu Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_kprobe.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index daa81571b22a..21f718472942 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -1480,8 +1480,10 @@ create_local_trace_kprobe(char *func, void *addr, unsigned long offs, } ret = __register_trace_kprobe(tk); - if (ret < 0) + if (ret < 0) { + kfree(tk->tp.call.print_fmt); goto error; + } return &tk->tp.call; error: @@ -1501,6 +1503,8 @@ void destroy_local_trace_kprobe(struct trace_event_call *event_call) } __unregister_trace_kprobe(tk); + + kfree(tk->tp.call.print_fmt); free_trace_kprobe(tk); } #endif /* CONFIG_PERF_EVENTS */ -- cgit v1.2.3 From d63c46734c545ad0488761059004a65c46efdde3 Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Tue, 10 Jul 2018 11:56:50 +0300 Subject: RDMA/mlx5: Fix memory leak in mlx5_ib_create_srq() error path Fix memory leak in the error path of mlx5_ib_create_srq() by making sure to free the allocated srq. Fixes: c2b37f76485f ("IB/mlx5: Fix integer overflows in mlx5_ib_create_srq") Signed-off-by: Kamal Heib Acked-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/srq.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/srq.c b/drivers/infiniband/hw/mlx5/srq.c index 0af7b7905550..f5de5adc9b1a 100644 --- a/drivers/infiniband/hw/mlx5/srq.c +++ b/drivers/infiniband/hw/mlx5/srq.c @@ -266,18 +266,24 @@ struct ib_srq *mlx5_ib_create_srq(struct ib_pd *pd, desc_size = sizeof(struct mlx5_wqe_srq_next_seg) + srq->msrq.max_gs * sizeof(struct mlx5_wqe_data_seg); - if (desc_size == 0 || srq->msrq.max_gs > desc_size) - return ERR_PTR(-EINVAL); + if (desc_size == 0 || srq->msrq.max_gs > desc_size) { + err = -EINVAL; + goto err_srq; + } desc_size = roundup_pow_of_two(desc_size); desc_size = max_t(size_t, 32, desc_size); - if (desc_size < sizeof(struct mlx5_wqe_srq_next_seg)) - return ERR_PTR(-EINVAL); + if (desc_size < sizeof(struct mlx5_wqe_srq_next_seg)) { + err = -EINVAL; + goto err_srq; + } srq->msrq.max_avail_gather = (desc_size - sizeof(struct mlx5_wqe_srq_next_seg)) / sizeof(struct mlx5_wqe_data_seg); srq->msrq.wqe_shift = ilog2(desc_size); buf_size = srq->msrq.max * desc_size; - if (buf_size < desc_size) - return ERR_PTR(-EINVAL); + if (buf_size < desc_size) { + err = -EINVAL; + goto err_srq; + } in.type = init_attr->srq_type; if (pd->uobject) -- cgit v1.2.3 From 61d769807f273fda962866f3d4c677cda9974d3c Mon Sep 17 00:00:00 2001 From: Mathieu Xhonneux Date: Tue, 10 Jul 2018 16:54:02 +0000 Subject: bpf: fix availability probing for seg6 helpers bpf_lwt_seg6_* helpers require CONFIG_IPV6_SEG6_BPF, and currently return -EOPNOTSUPP to indicate unavailability. This patch forces the BPF verifier to reject programs using these helpers when !CONFIG_IPV6_SEG6_BPF, allowing users to more easily probe if they are available or not. Signed-off-by: Mathieu Xhonneux Signed-off-by: Daniel Borkmann --- net/core/filter.c | 23 ++++++++--------------- 1 file changed, 8 insertions(+), 15 deletions(-) diff --git a/net/core/filter.c b/net/core/filter.c index a13f5b1f1636..06da770f543f 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -4536,10 +4536,10 @@ static const struct bpf_func_proto bpf_lwt_push_encap_proto = { .arg4_type = ARG_CONST_SIZE }; +#if IS_ENABLED(CONFIG_IPV6_SEG6_BPF) BPF_CALL_4(bpf_lwt_seg6_store_bytes, struct sk_buff *, skb, u32, offset, const void *, from, u32, len) { -#if IS_ENABLED(CONFIG_IPV6_SEG6_BPF) struct seg6_bpf_srh_state *srh_state = this_cpu_ptr(&seg6_bpf_srh_states); void *srh_tlvs, *srh_end, *ptr; @@ -4565,9 +4565,6 @@ BPF_CALL_4(bpf_lwt_seg6_store_bytes, struct sk_buff *, skb, u32, offset, memcpy(skb->data + offset, from, len); return 0; -#else /* CONFIG_IPV6_SEG6_BPF */ - return -EOPNOTSUPP; -#endif } static const struct bpf_func_proto bpf_lwt_seg6_store_bytes_proto = { @@ -4583,7 +4580,6 @@ static const struct bpf_func_proto bpf_lwt_seg6_store_bytes_proto = { BPF_CALL_4(bpf_lwt_seg6_action, struct sk_buff *, skb, u32, action, void *, param, u32, param_len) { -#if IS_ENABLED(CONFIG_IPV6_SEG6_BPF) struct seg6_bpf_srh_state *srh_state = this_cpu_ptr(&seg6_bpf_srh_states); struct ipv6_sr_hdr *srh; @@ -4631,9 +4627,6 @@ BPF_CALL_4(bpf_lwt_seg6_action, struct sk_buff *, skb, default: return -EINVAL; } -#else /* CONFIG_IPV6_SEG6_BPF */ - return -EOPNOTSUPP; -#endif } static const struct bpf_func_proto bpf_lwt_seg6_action_proto = { @@ -4649,7 +4642,6 @@ static const struct bpf_func_proto bpf_lwt_seg6_action_proto = { BPF_CALL_3(bpf_lwt_seg6_adjust_srh, struct sk_buff *, skb, u32, offset, s32, len) { -#if IS_ENABLED(CONFIG_IPV6_SEG6_BPF) struct seg6_bpf_srh_state *srh_state = this_cpu_ptr(&seg6_bpf_srh_states); void *srh_end, *srh_tlvs, *ptr; @@ -4693,9 +4685,6 @@ BPF_CALL_3(bpf_lwt_seg6_adjust_srh, struct sk_buff *, skb, u32, offset, srh_state->hdrlen += len; srh_state->valid = 0; return 0; -#else /* CONFIG_IPV6_SEG6_BPF */ - return -EOPNOTSUPP; -#endif } static const struct bpf_func_proto bpf_lwt_seg6_adjust_srh_proto = { @@ -4706,6 +4695,7 @@ static const struct bpf_func_proto bpf_lwt_seg6_adjust_srh_proto = { .arg2_type = ARG_ANYTHING, .arg3_type = ARG_ANYTHING, }; +#endif /* CONFIG_IPV6_SEG6_BPF */ bool bpf_helper_changes_pkt_data(void *func) { @@ -4727,11 +4717,12 @@ bool bpf_helper_changes_pkt_data(void *func) func == bpf_xdp_adjust_meta || func == bpf_msg_pull_data || func == bpf_xdp_adjust_tail || - func == bpf_lwt_push_encap || +#if IS_ENABLED(CONFIG_IPV6_SEG6_BPF) func == bpf_lwt_seg6_store_bytes || func == bpf_lwt_seg6_adjust_srh || - func == bpf_lwt_seg6_action - ) + func == bpf_lwt_seg6_action || +#endif + func == bpf_lwt_push_encap) return true; return false; @@ -5066,12 +5057,14 @@ static const struct bpf_func_proto * lwt_seg6local_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog) { switch (func_id) { +#if IS_ENABLED(CONFIG_IPV6_SEG6_BPF) case BPF_FUNC_lwt_seg6_store_bytes: return &bpf_lwt_seg6_store_bytes_proto; case BPF_FUNC_lwt_seg6_action: return &bpf_lwt_seg6_action_proto; case BPF_FUNC_lwt_seg6_adjust_srh: return &bpf_lwt_seg6_adjust_srh_proto; +#endif default: return lwt_out_func_proto(func_id, prog); } -- cgit v1.2.3 From b65f370d0671c4980ffe866c41e327b88893245c Mon Sep 17 00:00:00 2001 From: Okash Khawaja Date: Tue, 10 Jul 2018 14:33:07 -0700 Subject: bpf: btf: Fix bitfield extraction for big endian When extracting bitfield from a number, btf_int_bits_seq_show() builds a mask and accesses least significant byte of the number in a way specific to little-endian. This patch fixes that by checking endianness of the machine and then shifting left and right the unneeded bits. Thanks to Martin Lau for the help in navigating potential pitfalls when dealing with endianess and for the final solution. Fixes: b00b8daec828 ("bpf: btf: Add pretty print capability for data with BTF type info") Signed-off-by: Okash Khawaja Acked-by: Martin KaFai Lau Signed-off-by: Daniel Borkmann --- kernel/bpf/btf.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c index 2d49d18b793a..e016ac3afa24 100644 --- a/kernel/bpf/btf.c +++ b/kernel/bpf/btf.c @@ -991,16 +991,13 @@ static void btf_int_bits_seq_show(const struct btf *btf, void *data, u8 bits_offset, struct seq_file *m) { + u16 left_shift_bits, right_shift_bits; u32 int_data = btf_type_int(t); u16 nr_bits = BTF_INT_BITS(int_data); u16 total_bits_offset; u16 nr_copy_bytes; u16 nr_copy_bits; - u8 nr_upper_bits; - union { - u64 u64_num; - u8 u8_nums[8]; - } print_num; + u64 print_num; total_bits_offset = bits_offset + BTF_INT_OFFSET(int_data); data += BITS_ROUNDDOWN_BYTES(total_bits_offset); @@ -1008,21 +1005,20 @@ static void btf_int_bits_seq_show(const struct btf *btf, nr_copy_bits = nr_bits + bits_offset; nr_copy_bytes = BITS_ROUNDUP_BYTES(nr_copy_bits); - print_num.u64_num = 0; - memcpy(&print_num.u64_num, data, nr_copy_bytes); + print_num = 0; + memcpy(&print_num, data, nr_copy_bytes); - /* Ditch the higher order bits */ - nr_upper_bits = BITS_PER_BYTE_MASKED(nr_copy_bits); - if (nr_upper_bits) { - /* We need to mask out some bits of the upper byte. */ - u8 mask = (1 << nr_upper_bits) - 1; +#ifdef __BIG_ENDIAN_BITFIELD + left_shift_bits = bits_offset; +#else + left_shift_bits = BITS_PER_U64 - nr_copy_bits; +#endif + right_shift_bits = BITS_PER_U64 - nr_bits; - print_num.u8_nums[nr_copy_bytes - 1] &= mask; - } - - print_num.u64_num >>= bits_offset; + print_num <<= left_shift_bits; + print_num >>= right_shift_bits; - seq_printf(m, "0x%llx", print_num.u64_num); + seq_printf(m, "0x%llx", print_num); } static void btf_int_seq_show(const struct btf *btf, const struct btf_type *t, -- cgit v1.2.3 From b4c7e2bd2eb4764afe3af9409ff3b1b87116fa30 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Tue, 10 Jul 2018 08:22:40 +0100 Subject: ARM: 8780/1: ftrace: Only set kernel memory back to read-only after boot Dynamic ftrace requires modifying the code segments that are usually set to read-only. To do this, a per arch function is called both before and after the ftrace modifications are performed. The "before" function will set kernel code text to read-write to allow for ftrace to make the modifications, and the "after" function will set the kernel code text back to "read-only" to keep the kernel code text protected. The issue happens when dynamic ftrace is tested at boot up. The test is done before the kernel code text has been set to read-only. But the "before" and "after" calls are still performed. The "after" call will change the kernel code text to read-only prematurely, and other boot code that expects this code to be read-write will fail. The solution is to add a variable that is set when the kernel code text is expected to be converted to read-only, and make the ftrace "before" and "after" calls do nothing if that variable is not yet set. This is similar to the x86 solution from commit 162396309745 ("ftrace, x86: make kernel text writable only for conversions"). Link: http://lkml.kernel.org/r/20180620212906.24b7b66e@vmware.local.home Reported-by: Stefan Agner Tested-by: Stefan Agner Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Russell King --- arch/arm/mm/init.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index c186474422f3..0cc8e04295a4 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -736,20 +736,29 @@ static int __mark_rodata_ro(void *unused) return 0; } +static int kernel_set_to_readonly __read_mostly; + void mark_rodata_ro(void) { + kernel_set_to_readonly = 1; stop_machine(__mark_rodata_ro, NULL, NULL); debug_checkwx(); } void set_kernel_text_rw(void) { + if (!kernel_set_to_readonly) + return; + set_section_perms(ro_perms, ARRAY_SIZE(ro_perms), false, current->active_mm); } void set_kernel_text_ro(void) { + if (!kernel_set_to_readonly) + return; + set_section_perms(ro_perms, ARRAY_SIZE(ro_perms), true, current->active_mm); } -- cgit v1.2.3 From 6e6fddc78323533be570873abb728b7e0ba7e024 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Wed, 11 Jul 2018 15:30:14 +0200 Subject: bpf: fix panic due to oob in bpf_prog_test_run_skb sykzaller triggered several panics similar to the below: [...] [ 248.851531] BUG: KASAN: use-after-free in _copy_to_user+0x5c/0x90 [ 248.857656] Read of size 985 at addr ffff8808017ffff2 by task a.out/1425 [...] [ 248.865902] CPU: 1 PID: 1425 Comm: a.out Not tainted 4.18.0-rc4+ #13 [ 248.865903] Hardware name: Supermicro SYS-5039MS-H12TRF/X11SSE-F, BIOS 2.1a 03/08/2018 [ 248.865905] Call Trace: [ 248.865910] dump_stack+0xd6/0x185 [ 248.865911] ? show_regs_print_info+0xb/0xb [ 248.865913] ? printk+0x9c/0xc3 [ 248.865915] ? kmsg_dump_rewind_nolock+0xe4/0xe4 [ 248.865919] print_address_description+0x6f/0x270 [ 248.865920] kasan_report+0x25b/0x380 [ 248.865922] ? _copy_to_user+0x5c/0x90 [ 248.865924] check_memory_region+0x137/0x190 [ 248.865925] kasan_check_read+0x11/0x20 [ 248.865927] _copy_to_user+0x5c/0x90 [ 248.865930] bpf_test_finish.isra.8+0x4f/0xc0 [ 248.865932] bpf_prog_test_run_skb+0x6a0/0xba0 [...] After scrubbing the BPF prog a bit from the noise, turns out it called bpf_skb_change_head() for the lwt_xmit prog with headroom of 2. Nothing wrong in that, however, this was run with repeat >> 0 in bpf_prog_test_run_skb() and the same skb thus keeps changing until the pskb_expand_head() called from skb_cow() keeps bailing out in atomic alloc context with -ENOMEM. So upon return we'll basically have 0 headroom left yet blindly do the __skb_push() of 14 bytes and keep copying data from there in bpf_test_finish() out of bounds. Fix to check if we have enough headroom and if pskb_expand_head() fails, bail out with error. Another bug independent of this fix (but related in triggering above) is that BPF_PROG_TEST_RUN should be reworked to reset the skb/xdp buffer to it's original state from input as otherwise repeating the same test in a loop won't work for benchmarking when underlying input buffer is getting changed by the prog each time and reused for the next run leading to unexpected results. Fixes: 1cf1cae963c2 ("bpf: introduce BPF_PROG_TEST_RUN command") Reported-by: syzbot+709412e651e55ed96498@syzkaller.appspotmail.com Reported-by: syzbot+54f39d6ab58f39720a55@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov --- net/bpf/test_run.c | 17 ++++++++++++++--- tools/testing/selftests/bpf/test_verifier.c | 23 ++++++++++++++++++++++- 2 files changed, 36 insertions(+), 4 deletions(-) diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c index 68c3578343b4..22a78eedf4b1 100644 --- a/net/bpf/test_run.c +++ b/net/bpf/test_run.c @@ -96,6 +96,7 @@ int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr, u32 size = kattr->test.data_size_in; u32 repeat = kattr->test.repeat; u32 retval, duration; + int hh_len = ETH_HLEN; struct sk_buff *skb; void *data; int ret; @@ -131,12 +132,22 @@ int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr, skb_reset_network_header(skb); if (is_l2) - __skb_push(skb, ETH_HLEN); + __skb_push(skb, hh_len); if (is_direct_pkt_access) bpf_compute_data_pointers(skb); retval = bpf_test_run(prog, skb, repeat, &duration); - if (!is_l2) - __skb_push(skb, ETH_HLEN); + if (!is_l2) { + if (skb_headroom(skb) < hh_len) { + int nhead = HH_DATA_ALIGN(hh_len - skb_headroom(skb)); + + if (pskb_expand_head(skb, nhead, 0, GFP_USER)) { + kfree_skb(skb); + return -ENOMEM; + } + } + memset(__skb_push(skb, hh_len), 0, hh_len); + } + size = skb->len; /* bpf program can never convert linear skb to non-linear */ if (WARN_ON_ONCE(skb_is_nonlinear(skb))) diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c index 2ecd27b670d7..f5f7bcc96046 100644 --- a/tools/testing/selftests/bpf/test_verifier.c +++ b/tools/testing/selftests/bpf/test_verifier.c @@ -4974,6 +4974,24 @@ static struct bpf_test tests[] = { .result = ACCEPT, .prog_type = BPF_PROG_TYPE_LWT_XMIT, }, + { + "make headroom for LWT_XMIT", + .insns = { + BPF_MOV64_REG(BPF_REG_6, BPF_REG_1), + BPF_MOV64_IMM(BPF_REG_2, 34), + BPF_MOV64_IMM(BPF_REG_3, 0), + BPF_EMIT_CALL(BPF_FUNC_skb_change_head), + /* split for s390 to succeed */ + BPF_MOV64_REG(BPF_REG_1, BPF_REG_6), + BPF_MOV64_IMM(BPF_REG_2, 42), + BPF_MOV64_IMM(BPF_REG_3, 0), + BPF_EMIT_CALL(BPF_FUNC_skb_change_head), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_LWT_XMIT, + }, { "invalid access of tc_classid for LWT_IN", .insns = { @@ -12554,8 +12572,11 @@ static void do_test_single(struct bpf_test *test, bool unpriv, } if (fd_prog >= 0) { + __u8 tmp[TEST_DATA_LEN << 2]; + __u32 size_tmp = sizeof(tmp); + err = bpf_prog_test_run(fd_prog, 1, test->data, - sizeof(test->data), NULL, NULL, + sizeof(test->data), tmp, &size_tmp, &retval, NULL); if (err && errno != 524/*ENOTSUPP*/ && errno != EPERM) { printf("Unexpected bpf_prog_test_run error\n"); -- cgit v1.2.3 From f20a4c46b984331a509528fa2b84125c617ef98b Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 10 Jul 2018 12:05:31 +0100 Subject: sfp: ensure we clean up properly on bus registration failure We fail to correctly clean up after a bus registration failure, which can lead to an incorrect assumption about the registration state of the upstream or sfp cage. Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/sfp-bus.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-) diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index d437f4f5ed52..36af5e8267fe 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -436,6 +436,13 @@ void sfp_upstream_stop(struct sfp_bus *bus) } EXPORT_SYMBOL_GPL(sfp_upstream_stop); +static void sfp_upstream_clear(struct sfp_bus *bus) +{ + bus->upstream_ops = NULL; + bus->upstream = NULL; + bus->netdev = NULL; +} + /** * sfp_register_upstream() - Register the neighbouring device * @fwnode: firmware node for the SFP bus @@ -462,8 +469,11 @@ struct sfp_bus *sfp_register_upstream(struct fwnode_handle *fwnode, bus->upstream = upstream; bus->netdev = ndev; - if (bus->sfp) + if (bus->sfp) { ret = sfp_register_bus(bus); + if (ret) + sfp_upstream_clear(bus); + } rtnl_unlock(); } @@ -488,8 +498,7 @@ void sfp_unregister_upstream(struct sfp_bus *bus) rtnl_lock(); if (bus->sfp) sfp_unregister_bus(bus); - bus->upstream = NULL; - bus->netdev = NULL; + sfp_upstream_clear(bus); rtnl_unlock(); sfp_bus_put(bus); @@ -561,6 +570,13 @@ void sfp_module_remove(struct sfp_bus *bus) } EXPORT_SYMBOL_GPL(sfp_module_remove); +static void sfp_socket_clear(struct sfp_bus *bus) +{ + bus->sfp_dev = NULL; + bus->sfp = NULL; + bus->socket_ops = NULL; +} + struct sfp_bus *sfp_register_socket(struct device *dev, struct sfp *sfp, const struct sfp_socket_ops *ops) { @@ -573,8 +589,11 @@ struct sfp_bus *sfp_register_socket(struct device *dev, struct sfp *sfp, bus->sfp = sfp; bus->socket_ops = ops; - if (bus->netdev) + if (bus->netdev) { ret = sfp_register_bus(bus); + if (ret) + sfp_socket_clear(bus); + } rtnl_unlock(); } @@ -592,9 +611,7 @@ void sfp_unregister_socket(struct sfp_bus *bus) rtnl_lock(); if (bus->netdev) sfp_unregister_bus(bus); - bus->sfp_dev = NULL; - bus->sfp = NULL; - bus->socket_ops = NULL; + sfp_socket_clear(bus); rtnl_unlock(); sfp_bus_put(bus); -- cgit v1.2.3 From 576cd32082351620a4e76b8babc4d5ae9b4bbb98 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 10 Jul 2018 12:05:36 +0100 Subject: sfp: fix module initialisation with netdev already up It was been observed that with a particular order of initialisation, the netdev can be up, but the SFP module still has its TX_DISABLE signal asserted. This occurs when the network device brought up before the SFP kernel module has been inserted by userspace. This occurs because sfp-bus layer does not hear about the change in network device state, and so assumes that it is still down. Set netdev->sfp when the upstream is registered to work around this problem. Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/sfp-bus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index 36af5e8267fe..740655261e5b 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -349,7 +349,6 @@ static int sfp_register_bus(struct sfp_bus *bus) } if (bus->started) bus->socket_ops->start(bus->sfp); - bus->netdev->sfp_bus = bus; bus->registered = true; return 0; } @@ -364,7 +363,6 @@ static void sfp_unregister_bus(struct sfp_bus *bus) if (bus->phydev && ops && ops->disconnect_phy) ops->disconnect_phy(bus->upstream); } - bus->netdev->sfp_bus = NULL; bus->registered = false; } @@ -440,6 +438,7 @@ static void sfp_upstream_clear(struct sfp_bus *bus) { bus->upstream_ops = NULL; bus->upstream = NULL; + bus->netdev->sfp_bus = NULL; bus->netdev = NULL; } @@ -468,6 +467,7 @@ struct sfp_bus *sfp_register_upstream(struct fwnode_handle *fwnode, bus->upstream_ops = ops; bus->upstream = upstream; bus->netdev = ndev; + ndev->sfp_bus = bus; if (bus->sfp) { ret = sfp_register_bus(bus); -- cgit v1.2.3 From b6e44b4c74ef75f729f0147d43d189173fe463c9 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Wed, 11 Jul 2018 16:44:44 -0600 Subject: nvme-pci: fix memory leak on probe failure The nvme driver specific structures need to be initialized prior to enabling the generic controller so we can unwind on failure with out using the reference counting callbacks so that 'probe' and 'remove' can be symmetric. The newly added iod_mempool is the only resource that was being allocated out of order, and a failure there would leak the generic controller memory. This patch just moves that allocation above the controller initialization. Fixes: 943e942e6266f ("nvme-pci: limit max IO size and segments to avoid high order allocations") Reported-by: Weiping Zhang Signed-off-by: Keith Busch Signed-off-by: Christoph Hellwig --- drivers/nvme/host/pci.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index ba943f211687..ddd441b1516a 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2556,11 +2556,6 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) quirks |= check_vendor_combination_bug(pdev); - result = nvme_init_ctrl(&dev->ctrl, &pdev->dev, &nvme_pci_ctrl_ops, - quirks); - if (result) - goto release_pools; - /* * Double check that our mempool alloc size will cover the biggest * command we support. @@ -2578,6 +2573,11 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto release_pools; } + result = nvme_init_ctrl(&dev->ctrl, &pdev->dev, &nvme_pci_ctrl_ops, + quirks); + if (result) + goto release_mempool; + dev_info(dev->ctrl.device, "pci function %s\n", dev_name(&pdev->dev)); nvme_get_ctrl(&dev->ctrl); @@ -2585,6 +2585,8 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) return 0; + release_mempool: + mempool_destroy(dev->iod_mempool); release_pools: nvme_release_prp_pools(dev); unmap: -- cgit v1.2.3 From 20c4515a1af770f4fb0dc6b044ffc9a6031e5767 Mon Sep 17 00:00:00 2001 From: "Ewan D. Milne" Date: Tue, 10 Jul 2018 10:27:24 -0400 Subject: qed: fix spelling mistake "successffuly" -> "successfully" Trivial fix to spelling mistake in qed_probe message. Signed-off-by: Ewan D. Milne Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index 0cbc74d6ca8b..758a9a5127fa 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -371,7 +371,7 @@ static struct qed_dev *qed_probe(struct pci_dev *pdev, goto err2; } - DP_INFO(cdev, "qed_probe completed successffuly\n"); + DP_INFO(cdev, "qed_probe completed successfully\n"); return cdev; -- cgit v1.2.3 From dad59262b79b0588cfeeda19fd88307e3e91c0ea Mon Sep 17 00:00:00 2001 From: Alastair Bridgewater Date: Wed, 11 Jul 2018 18:09:45 -0400 Subject: ALSA: hda/ca0132: Add Recon3Di quirk for Gigabyte G1.Sniper Z97 These motherboards have Sound Core3D and apparently "support" Recon3Di. Added to the quirk list as QUIRK_R3DI. Issue report, PCI Subsystem ID, and testing by a contributor on IRC who wished to remain anonymous. Signed-off-by: Alastair Bridgewater Reviewed-by: Connor McAdams Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 4ff5320378e2..f5203f681b6e 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -1048,6 +1048,7 @@ static const struct snd_pci_quirk ca0132_quirks[] = { SND_PCI_QUIRK(0x1102, 0x0010, "Sound Blaster Z", QUIRK_SBZ), SND_PCI_QUIRK(0x1102, 0x0023, "Sound Blaster Z", QUIRK_SBZ), SND_PCI_QUIRK(0x1458, 0xA016, "Recon3Di", QUIRK_R3DI), + SND_PCI_QUIRK(0x1458, 0xA026, "Gigabyte G1.Sniper Z97", QUIRK_R3DI), SND_PCI_QUIRK(0x1458, 0xA036, "Recon3Di", QUIRK_R3DI), {} }; -- cgit v1.2.3 From c5a59d2477abf04e1b77152bef49383fd212da8d Mon Sep 17 00:00:00 2001 From: Alastair Bridgewater Date: Wed, 11 Jul 2018 18:09:46 -0400 Subject: ALSA: hda/ca0132: Update a pci quirk device name The PCI subsystem in question for this quirk rule has been identified as a Gigabyte GA-Z170X-Gaming 7 motherboard. Set the device name appropriately. Signed-off-by: Alastair Bridgewater Reviewed-by: Connor McAdams Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index f5203f681b6e..321e95c409c1 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -1049,7 +1049,7 @@ static const struct snd_pci_quirk ca0132_quirks[] = { SND_PCI_QUIRK(0x1102, 0x0023, "Sound Blaster Z", QUIRK_SBZ), SND_PCI_QUIRK(0x1458, 0xA016, "Recon3Di", QUIRK_R3DI), SND_PCI_QUIRK(0x1458, 0xA026, "Gigabyte G1.Sniper Z97", QUIRK_R3DI), - SND_PCI_QUIRK(0x1458, 0xA036, "Recon3Di", QUIRK_R3DI), + SND_PCI_QUIRK(0x1458, 0xA036, "Gigabyte GA-Z170X-Gaming 7", QUIRK_R3DI), {} }; -- cgit v1.2.3 From e69b5d308da72cbf4e7911c3979f9a46d28532af Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Mon, 2 Jul 2018 12:00:18 +0200 Subject: xen: remove global bit from __default_kernel_pte_mask for pv guests When removing the global bit from __supported_pte_mask do the same for __default_kernel_pte_mask in order to avoid the WARN_ONCE() in check_pgprot() when setting a kernel pte before having called init_mem_mapping(). Cc: # 4.17 Reported-by: Michael Young Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Signed-off-by: Juergen Gross --- arch/x86/xen/enlighten_pv.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index 8d4e2e1ae60b..4816b6f82a9a 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -1229,6 +1229,7 @@ asmlinkage __visible void __init xen_start_kernel(void) /* Prevent unwanted bits from being set in PTEs. */ __supported_pte_mask &= ~_PAGE_GLOBAL; + __default_kernel_pte_mask &= ~_PAGE_GLOBAL; /* * Prevent page tables from being allocated in highmem, even -- cgit v1.2.3 From 2f8b5b21830aea95989a6e67d8a971297272a086 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 10 Jul 2018 14:47:25 -0500 Subject: ARM: DRA7/OMAP5: Enable ACTLR[0] (Enable invalidates of BTB) for secondary cores Call secure services to enable ACTLR[0] (Enable invalidates of BTB with ICIALLU) when branch hardening is enabled for kernel. On GP devices OMAP5/DRA7, there is no possibility to update secure side since "secure world" is ROM and there are no override mechanisms possible. On HS devices, appropriate PPA should do the workarounds as well. However, the configuration is only done for secondary core, since it is expected that firmware/bootloader will have enabled the required configuration for the primary boot core (note: bootloaders typically will NOT enable secondary processors, since it has no need to do so). Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap-smp.c | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 69df3620eca5..1c73694c871a 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -109,6 +109,45 @@ void omap5_erratum_workaround_801819(void) static inline void omap5_erratum_workaround_801819(void) { } #endif +#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR +/* + * Configure ACR and enable ACTLR[0] (Enable invalidates of BTB with + * ICIALLU) to activate the workaround for secondary Core. + * NOTE: it is assumed that the primary core's configuration is done + * by the boot loader (kernel will detect a misconfiguration and complain + * if this is not done). + * + * In General Purpose(GP) devices, ACR bit settings can only be done + * by ROM code in "secure world" using the smc call and there is no + * option to update the "firmware" on such devices. This also works for + * High security(HS) devices, as a backup option in case the + * "update" is not done in the "security firmware". + */ +static void omap5_secondary_harden_predictor(void) +{ + u32 acr, acr_mask; + + asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); + + /* + * ACTLR[0] (Enable invalidates of BTB with ICIALLU) + */ + acr_mask = BIT(0); + + /* Do we already have it done.. if yes, skip expensive smc */ + if ((acr & acr_mask) == acr_mask) + return; + + acr |= acr_mask; + omap_smc1(OMAP5_DRA7_MON_SET_ACR_INDEX, acr); + + pr_debug("%s: ARM ACR setup for CVE_2017_5715 applied on CPU%d\n", + __func__, smp_processor_id()); +} +#else +static inline void omap5_secondary_harden_predictor(void) { } +#endif + static void omap4_secondary_init(unsigned int cpu) { /* @@ -131,6 +170,8 @@ static void omap4_secondary_init(unsigned int cpu) set_cntfreq(); /* Configure ACR to disable streaming WA for 801819 */ omap5_erratum_workaround_801819(); + /* Enable ACR to allow for ICUALLU workaround */ + omap5_secondary_harden_predictor(); } /* -- cgit v1.2.3 From 923847413f7316b5ced3491769b3fefa6c56a79a Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Wed, 11 Jul 2018 12:54:54 -0500 Subject: ARM: dts: am3517.dtsi: Disable reference to OMAP3 OTG controller The AM3517 has a different OTG controller location than the OMAP3, which is included from omap3.dtsi. This results in a hwmod error. Since the AM3517 has a different OTG controller address, this patch disabes one that is isn't available. Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am3517.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index 4b6062b631b1..23ea381d363f 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -91,6 +91,11 @@ }; }; +/* Table Table 5-79 of the TRM shows 480ab000 is reserved */ +&usb_otg_hs { + status = "disabled"; +}; + &iva { status = "disabled"; }; -- cgit v1.2.3 From d14c780c11fbc10f66c43e7b64eefe87ca442bd3 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 18 Jun 2018 12:02:00 -0400 Subject: ixgbe: Be more careful when modifying MAC filters This change makes it so that we are much more explicit about the ordering of updates to the receive address register (RAR) table. Prior to this patch I believe we may have been updating the table while entries were still active, or possibly allowing for reordering of things since we weren't explicitly flushing writes to either the lower or upper portion of the register prior to accessing the other half. Signed-off-by: Alexander Duyck Reviewed-by: Shannon Nelson Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index 3f5c350716bb..0bd1294ba517 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -1871,7 +1871,12 @@ s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, if (enable_addr != 0) rar_high |= IXGBE_RAH_AV; + /* Record lower 32 bits of MAC address and then make + * sure that write is flushed to hardware before writing + * the upper 16 bits and setting the valid bit. + */ IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low); + IXGBE_WRITE_FLUSH(hw); IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); return 0; @@ -1903,8 +1908,13 @@ s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index) rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); - IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0); + /* Clear the address valid bit and upper 16 bits of the address + * before clearing the lower bits. This way we aren't updating + * a live filter. + */ IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); + IXGBE_WRITE_FLUSH(hw); + IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0); /* clear VMDq pool/queue selection for this RAR */ hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL); -- cgit v1.2.3 From d89d01f2232b90e8024ae07ff5ab213521875448 Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Thu, 12 Jul 2018 10:23:21 -0400 Subject: drm/amd/display: Convert 10kHz clks from PPLib into kHz for Vega MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver is expecting clock frequency in kHz, while SMU returns the values in 10kHz, which causes the bandwidth validation to fail 4.18 has the faulty clock assignment in pp_to_dc_clock_levels_with_latency only, which is only used by Vega. Make sure we multiply these values by 10 here, as we do for other ASICs as powerplay assigned them wrong. 4.19 has the proper fix in powerplay. v2: Add Fixes tag v3: Fixes -> Bugzilla, with simplified link Bugzilla: https://bugs.freedesktop.org/107082 Signed-off-by: Mikita Lipski Signed-off-by: Harry Wentland Acked-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_services.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_services.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_services.c index 5a3346124a01..5a2e952c5bea 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_services.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_services.c @@ -255,8 +255,9 @@ static void pp_to_dc_clock_levels_with_latency( DC_DECODE_PP_CLOCK_TYPE(dc_clk_type)); for (i = 0; i < clk_level_info->num_levels; i++) { - DRM_DEBUG("DM_PPLIB:\t %d\n", pp_clks->data[i].clocks_in_khz); - clk_level_info->data[i].clocks_in_khz = pp_clks->data[i].clocks_in_khz; + DRM_DEBUG("DM_PPLIB:\t %d in 10kHz\n", pp_clks->data[i].clocks_in_khz); + /* translate 10kHz to kHz */ + clk_level_info->data[i].clocks_in_khz = pp_clks->data[i].clocks_in_khz * 10; clk_level_info->data[i].latency_in_us = pp_clks->data[i].latency_in_us; } } -- cgit v1.2.3 From 8d4235f71513cdccd9dc52b674323c3591552bc1 Mon Sep 17 00:00:00 2001 From: David Francis Date: Thu, 12 Jul 2018 10:07:49 -0400 Subject: amd/dc/dce100: On dce100, set clocks to 0 on suspend [Why] When a dce100 asic was suspended, the clocks were not set to 0. Upon resume, the new clock was compared to the existing clock, they were found to be the same, and so the clock was not set. This resulted in a pernicious blackscreen. [How] In atomic commit, check to see if there are any active pipes. If no, set clocks to 0 Signed-off-by: David Francis Signed-off-by: Alex Deucher --- .../gpu/drm/amd/display/dc/dce100/dce100_resource.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c b/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c index 38ec0d609297..344dd2e69e7c 100644 --- a/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c @@ -678,9 +678,22 @@ bool dce100_validate_bandwidth( struct dc *dc, struct dc_state *context) { - /* TODO implement when needed but for now hardcode max value*/ - context->bw.dce.dispclk_khz = 681000; - context->bw.dce.yclk_khz = 250000 * MEMORY_TYPE_MULTIPLIER; + int i; + bool at_least_one_pipe = false; + + for (i = 0; i < dc->res_pool->pipe_count; i++) { + if (context->res_ctx.pipe_ctx[i].stream) + at_least_one_pipe = true; + } + + if (at_least_one_pipe) { + /* TODO implement when needed but for now hardcode max value*/ + context->bw.dce.dispclk_khz = 681000; + context->bw.dce.yclk_khz = 250000 * MEMORY_TYPE_MULTIPLIER; + } else { + context->bw.dce.dispclk_khz = 0; + context->bw.dce.yclk_khz = 0; + } return true; } -- cgit v1.2.3 From c411104115e6821f26fc8f6de8b235ddf98de688 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 4 Jul 2018 12:53:37 +0300 Subject: ixgbe: Off by one in ixgbe_ipsec_tx() The ipsec->tx_tbl[] has IXGBE_IPSEC_MAX_SA_COUNT elements so the > needs to be changed to >= so we don't read one element beyond the end of the array. Fixes: 592594704761 ("ixgbe: process the Tx ipsec offload") Signed-off-by: Dan Carpenter Acked-by: Shannon Nelson Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c index c116f459945d..da4322e4daed 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c @@ -839,7 +839,7 @@ int ixgbe_ipsec_tx(struct ixgbe_ring *tx_ring, } itd->sa_idx = xs->xso.offload_handle - IXGBE_IPSEC_BASE_TX_INDEX; - if (unlikely(itd->sa_idx > IXGBE_IPSEC_MAX_SA_COUNT)) { + if (unlikely(itd->sa_idx >= IXGBE_IPSEC_MAX_SA_COUNT)) { netdev_err(tx_ring->netdev, "%s: bad sa_idx=%d handle=%lu\n", __func__, itd->sa_idx, xs->xso.offload_handle); return 0; -- cgit v1.2.3 From b203cc7a4fc94b373f6b0d4418e5e30f15645bf9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 26 Jun 2018 06:49:09 -0300 Subject: networking: e100.rst: Get rid of Sphinx warnings Documentation/networking/e100.rst:57: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:68: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:75: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:84: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:93: WARNING: Inline emphasis start-string without end-string. While here, fix some highlights. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jeff Kirsher --- Documentation/networking/e100.rst | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) diff --git a/Documentation/networking/e100.rst b/Documentation/networking/e100.rst index 9708f5fa76de..f81111eba9c5 100644 --- a/Documentation/networking/e100.rst +++ b/Documentation/networking/e100.rst @@ -47,41 +47,45 @@ Driver Configuration Parameters The default value for each parameter is generally the recommended setting, unless otherwise noted. -Rx Descriptors: Number of receive descriptors. A receive descriptor is a data +Rx Descriptors: + Number of receive descriptors. A receive descriptor is a data structure that describes a receive buffer and its attributes to the network controller. The data in the descriptor is used by the controller to write data from the controller to host memory. In the 3.x.x driver the valid range for this parameter is 64-256. The default value is 256. This parameter can be changed using the command:: - ethtool -G eth? rx n + ethtool -G eth? rx n Where n is the number of desired Rx descriptors. -Tx Descriptors: Number of transmit descriptors. A transmit descriptor is a data +Tx Descriptors: + Number of transmit descriptors. A transmit descriptor is a data structure that describes a transmit buffer and its attributes to the network controller. The data in the descriptor is used by the controller to read data from the host memory to the controller. In the 3.x.x driver the valid range for this parameter is 64-256. The default value is 128. This parameter can be changed using the command:: - ethtool -G eth? tx n + ethtool -G eth? tx n Where n is the number of desired Tx descriptors. -Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by +Speed/Duplex: + The driver auto-negotiates the link speed and duplex settings by default. The ethtool utility can be used as follows to force speed/duplex.:: - ethtool -s eth? autoneg off speed {10|100} duplex {full|half} + ethtool -s eth? autoneg off speed {10|100} duplex {full|half} NOTE: setting the speed/duplex to incorrect values will cause the link to fail. -Event Log Message Level: The driver uses the message level flag to log events +Event Log Message Level: + The driver uses the message level flag to log events to syslog. The message level can be set at driver load time. It can also be set using the command:: - ethtool -s eth? msglvl n + ethtool -s eth? msglvl n Additional Configurations @@ -92,7 +96,7 @@ Configuring the Driver on Different Distributions Configuring a network driver to load properly when the system is started is distribution dependent. Typically, the configuration process involves -adding an alias line to /etc/modprobe.d/*.conf as well as editing other +adding an alias line to `/etc/modprobe.d/*.conf` as well as editing other system startup scripts and/or configuration files. Many popular Linux distributions ship with tools to make these changes for you. To learn the proper way to configure a network device for your system, refer to @@ -160,7 +164,10 @@ This results in unbalanced receive traffic. If you have multiple interfaces in a server, either turn on ARP filtering by -(1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter +(1) entering:: + + echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter + (this only works if your kernel's version is higher than 2.4.5), or (2) installing the interfaces in separate broadcast domains (either -- cgit v1.2.3 From 8dc4b1a799fbf4e21ea014076284ee73bb4f9443 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 26 Jun 2018 06:49:10 -0300 Subject: networking: e1000.rst: Get rid of Sphinx warnings Documentation/networking/e1000.rst:83: ERROR: Unexpected indentation. Documentation/networking/e1000.rst:84: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/networking/e1000.rst:173: WARNING: Definition list ends without a blank line; unexpected unindent. Documentation/networking/e1000.rst:236: WARNING: Definition list ends without a blank line; unexpected unindent. While here, fix highlights and mark a table as such. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jeff Kirsher --- Documentation/networking/e1000.rst | 187 ++++++++++++++++++++++--------------- 1 file changed, 112 insertions(+), 75 deletions(-) diff --git a/Documentation/networking/e1000.rst b/Documentation/networking/e1000.rst index 144b87eef153..f10dd4086921 100644 --- a/Documentation/networking/e1000.rst +++ b/Documentation/networking/e1000.rst @@ -34,7 +34,8 @@ Command Line Parameters The default value for each parameter is generally the recommended setting, unless otherwise noted. -NOTES: For more information about the AutoNeg, Duplex, and Speed +NOTES: + For more information about the AutoNeg, Duplex, and Speed parameters, see the "Speed and Duplex Configuration" section in this document. @@ -45,22 +46,27 @@ NOTES: For more information about the AutoNeg, Duplex, and Speed AutoNeg ------- + (Supported only on adapters with copper connections) -Valid Range: 0x01-0x0F, 0x20-0x2F -Default Value: 0x2F + +:Valid Range: 0x01-0x0F, 0x20-0x2F +:Default Value: 0x2F This parameter is a bit-mask that specifies the speed and duplex settings advertised by the adapter. When this parameter is used, the Speed and Duplex parameters must not be specified. -NOTE: Refer to the Speed and Duplex section of this readme for more +NOTE: + Refer to the Speed and Duplex section of this readme for more information on the AutoNeg parameter. Duplex ------ + (Supported only on adapters with copper connections) -Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full) -Default Value: 0 + +:Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full) +:Default Value: 0 This defines the direction in which data is allowed to flow. Can be either one or two-directional. If both Duplex and the link partner are @@ -70,18 +76,22 @@ duplex. FlowControl ----------- -Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx) -Default Value: Reads flow control settings from the EEPROM + +:Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx) +:Default Value: Reads flow control settings from the EEPROM This parameter controls the automatic generation(Tx) and response(Rx) to Ethernet PAUSE frames. InterruptThrottleRate --------------------- + (not supported on Intel(R) 82542, 82543 or 82544-based adapters) -Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative, - 4=simplified balancing) -Default Value: 3 + +:Valid Range: + 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative, + 4=simplified balancing) +:Default Value: 3 The driver can limit the amount of interrupts per second that the adapter will generate for incoming packets. It does this by writing a value to the @@ -135,13 +145,15 @@ Setting InterruptThrottleRate to 0 turns off any interrupt moderation and may improve small packet latency, but is generally not suitable for bulk throughput traffic. -NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and +NOTE: + InterruptThrottleRate takes precedence over the TxAbsIntDelay and RxAbsIntDelay parameters. In other words, minimizing the receive and/or transmit absolute delays does not force the controller to generate more interrupts than what the Interrupt Throttle Rate allows. -CAUTION: If you are using the Intel(R) PRO/1000 CT Network Connection +CAUTION: + If you are using the Intel(R) PRO/1000 CT Network Connection (controller 82547), setting InterruptThrottleRate to a value greater than 75,000, may hang (stop transmitting) adapters under certain network conditions. If this occurs a NETDEV @@ -151,7 +163,8 @@ CAUTION: If you are using the Intel(R) PRO/1000 CT Network Connection hang, ensure that InterruptThrottleRate is set no greater than 75,000 and is not set to 0. -NOTE: When e1000 is loaded with default settings and multiple adapters +NOTE: + When e1000 is loaded with default settings and multiple adapters are in use simultaneously, the CPU utilization may increase non- linearly. In order to limit the CPU utilization without impacting the overall throughput, we recommend that you load the driver as @@ -168,9 +181,11 @@ NOTE: When e1000 is loaded with default settings and multiple adapters RxDescriptors ------------- -Valid Range: 48-256 for 82542 and 82543-based adapters - 48-4096 for all other supported adapters -Default Value: 256 + +:Valid Range: + - 48-256 for 82542 and 82543-based adapters + - 48-4096 for all other supported adapters +:Default Value: 256 This value specifies the number of receive buffer descriptors allocated by the driver. Increasing this value allows the driver to buffer more @@ -180,15 +195,17 @@ Each descriptor is 16 bytes. A receive buffer is also allocated for each descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending on the MTU setting. The maximum MTU size is 16110. -NOTE: MTU designates the frame size. It only needs to be set for Jumbo +NOTE: + MTU designates the frame size. It only needs to be set for Jumbo Frames. Depending on the available system resources, the request for a higher number of receive descriptors may be denied. In this case, use a lower number. RxIntDelay ---------- -Valid Range: 0-65535 (0=off) -Default Value: 0 + +:Valid Range: 0-65535 (0=off) +:Default Value: 0 This value delays the generation of receive interrupts in units of 1.024 microseconds. Receive interrupt reduction can improve CPU efficiency if @@ -198,7 +215,8 @@ of TCP traffic. If the system is reporting dropped receives, this value may be set too high, causing the driver to run out of available receive descriptors. -CAUTION: When setting RxIntDelay to a value other than 0, adapters may +CAUTION: + When setting RxIntDelay to a value other than 0, adapters may hang (stop transmitting) under certain network conditions. If this occurs a NETDEV WATCHDOG message is logged in the system event log. In addition, the controller is automatically reset, @@ -207,9 +225,11 @@ CAUTION: When setting RxIntDelay to a value other than 0, adapters may RxAbsIntDelay ------------- + (This parameter is supported only on 82540, 82545 and later adapters.) -Valid Range: 0-65535 (0=off) -Default Value: 128 + +:Valid Range: 0-65535 (0=off) +:Default Value: 128 This value, in units of 1.024 microseconds, limits the delay in which a receive interrupt is generated. Useful only if RxIntDelay is non-zero, @@ -220,9 +240,11 @@ conditions. Speed ----- + (This parameter is supported only on adapters with copper connections.) -Valid Settings: 0, 10, 100, 1000 -Default Value: 0 (auto-negotiate at all supported speeds) + +:Valid Settings: 0, 10, 100, 1000 +:Default Value: 0 (auto-negotiate at all supported speeds) Speed forces the line speed to the specified value in megabits per second (Mbps). If this parameter is not specified or is set to 0 and the link @@ -231,22 +253,26 @@ speed. Duplex should also be set when Speed is set to either 10 or 100. TxDescriptors ------------- -Valid Range: 48-256 for 82542 and 82543-based adapters - 48-4096 for all other supported adapters -Default Value: 256 + +:Valid Range: + - 48-256 for 82542 and 82543-based adapters + - 48-4096 for all other supported adapters +:Default Value: 256 This value is the number of transmit descriptors allocated by the driver. Increasing this value allows the driver to queue more transmits. Each descriptor is 16 bytes. -NOTE: Depending on the available system resources, the request for a +NOTE: + Depending on the available system resources, the request for a higher number of transmit descriptors may be denied. In this case, use a lower number. TxIntDelay ---------- -Valid Range: 0-65535 (0=off) -Default Value: 8 + +:Valid Range: 0-65535 (0=off) +:Default Value: 8 This value delays the generation of transmit interrupts in units of 1.024 microseconds. Transmit interrupt reduction can improve CPU @@ -256,9 +282,11 @@ causing the driver to run out of available transmit descriptors. TxAbsIntDelay ------------- + (This parameter is supported only on 82540, 82545 and later adapters.) -Valid Range: 0-65535 (0=off) -Default Value: 32 + +:Valid Range: 0-65535 (0=off) +:Default Value: 32 This value, in units of 1.024 microseconds, limits the delay in which a transmit interrupt is generated. Useful only if TxIntDelay is non-zero, @@ -269,18 +297,21 @@ network conditions. XsumRX ------ + (This parameter is NOT supported on the 82542-based adapter.) -Valid Range: 0-1 -Default Value: 1 + +:Valid Range: 0-1 +:Default Value: 1 A value of '1' indicates that the driver should enable IP checksum offload for received packets (both UDP and TCP) to the adapter hardware. Copybreak --------- -Valid Range: 0-xxxxxxx (0=off) -Default Value: 256 -Usage: modprobe e1000.ko copybreak=128 + +:Valid Range: 0-xxxxxxx (0=off) +:Default Value: 256 +:Usage: modprobe e1000.ko copybreak=128 Driver copies all packets below or equaling this size to a fresh RX buffer before handing it up the stack. @@ -292,8 +323,9 @@ it is also available during runtime at SmartPowerDownEnable -------------------- -Valid Range: 0-1 -Default Value: 0 (disabled) + +:Valid Range: 0-1 +:Default Value: 0 (disabled) Allows PHY to turn off in lower power states. The user can turn off this parameter in supported chipsets. @@ -309,14 +341,14 @@ fiber interface board only links at 1000 Mbps full-duplex. For copper-based boards, the keywords interact as follows: - The default operation is auto-negotiate. The board advertises all +- The default operation is auto-negotiate. The board advertises all supported speed and duplex combinations, and it links at the highest common speed and duplex mode IF the link partner is set to auto-negotiate. - If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps +- If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps is advertised (The 1000BaseT spec requires auto-negotiation.) - If Speed = 10 or 100, then both Speed and Duplex should be set. Auto- +- If Speed = 10 or 100, then both Speed and Duplex should be set. Auto- negotiation is disabled, and the AutoNeg parameter is ignored. Partner SHOULD also be forced. @@ -328,13 +360,15 @@ process. The parameter may be specified as either a decimal or hexadecimal value as determined by the bitmap below. +============== ====== ====== ======= ======= ====== ====== ======= ====== Bit position 7 6 5 4 3 2 1 0 Decimal Value 128 64 32 16 8 4 2 1 Hex value 80 40 20 10 8 4 2 1 Speed (Mbps) N/A N/A 1000 N/A 100 100 10 10 Duplex Full Full Half Full Half +============== ====== ====== ======= ======= ====== ====== ======= ====== -Some examples of using AutoNeg: +Some examples of using AutoNeg:: modprobe e1000 AutoNeg=0x01 (Restricts autonegotiation to 10 Half) modprobe e1000 AutoNeg=1 (Same as above) @@ -357,56 +391,59 @@ Additional Configurations Jumbo Frames ------------ -Jumbo Frames support is enabled by changing the MTU to a value larger -than the default of 1500. Use the ifconfig command to increase the MTU -size. For example:: + + Jumbo Frames support is enabled by changing the MTU to a value larger than + the default of 1500. Use the ifconfig command to increase the MTU size. + For example:: ifconfig eth mtu 9000 up -This setting is not saved across reboots. It can be made permanent if -you add:: + This setting is not saved across reboots. It can be made permanent if + you add:: MTU=9000 -to the file /etc/sysconfig/network-scripts/ifcfg-eth. This example -applies to the Red Hat distributions; other distributions may store this -setting in a different location. + to the file /etc/sysconfig/network-scripts/ifcfg-eth. This example + applies to the Red Hat distributions; other distributions may store this + setting in a different location. + +Notes: + Degradation in throughput performance may be observed in some Jumbo frames + environments. If this is observed, increasing the application's socket buffer + size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help. + See the specific application manual and /usr/src/linux*/Documentation/ + networking/ip-sysctl.txt for more details. -Notes: Degradation in throughput performance may be observed in some -Jumbo frames environments. If this is observed, increasing the -application's socket buffer size and/or increasing the -/proc/sys/net/ipv4/tcp_*mem entry values may help. See the specific -application manual and /usr/src/linux*/Documentation/ -networking/ip-sysctl.txt for more details. + - The maximum MTU setting for Jumbo Frames is 16110. This value coincides + with the maximum Jumbo Frames size of 16128. -- The maximum MTU setting for Jumbo Frames is 16110. This value - coincides with the maximum Jumbo Frames size of 16128. + - Using Jumbo frames at 10 or 100 Mbps is not supported and may result in + poor performance or loss of link. -- Using Jumbo frames at 10 or 100 Mbps is not supported and may result - in poor performance or loss of link. + - Adapters based on the Intel(R) 82542 and 82573V/E controller do not + support Jumbo Frames. These correspond to the following product names:: -- Adapters based on the Intel(R) 82542 and 82573V/E controller do not - support Jumbo Frames. These correspond to the following product names: - Intel(R) PRO/1000 Gigabit Server Adapter Intel(R) PRO/1000 PM Network - Connection + Intel(R) PRO/1000 Gigabit Server Adapter + Intel(R) PRO/1000 PM Network Connection ethtool ------- -The driver utilizes the ethtool interface for driver configuration and -diagnostics, as well as displaying statistical information. The ethtool -version 1.6 or later is required for this functionality. -The latest release of ethtool can be found from -https://www.kernel.org/pub/software/network/ethtool/ + The driver utilizes the ethtool interface for driver configuration and + diagnostics, as well as displaying statistical information. The ethtool + version 1.6 or later is required for this functionality. + + The latest release of ethtool can be found from + https://www.kernel.org/pub/software/network/ethtool/ Enabling Wake on LAN* (WoL) --------------------------- -WoL is configured through the ethtool* utility. -WoL will be enabled on the system during the next shut down or reboot. -For this driver version, in order to enable WoL, the e1000 driver must be -loaded when shutting down or rebooting the system. + WoL is configured through the ethtool* utility. + WoL will be enabled on the system during the next shut down or reboot. + For this driver version, in order to enable WoL, the e1000 driver must be + loaded when shutting down or rebooting the system. Support ======= -- cgit v1.2.3 From 9feeb638cde083c737e295c0547f1b4f28e99583 Mon Sep 17 00:00:00 2001 From: Paul Menzel Date: Tue, 5 Jun 2018 19:00:22 +0200 Subject: tools build: fix # escaping in .cmd files for future Make In 2016 GNU Make made a backwards incompatible change to the way '#' characters were handled in Makefiles when used inside functions or macros: http://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57 Due to this change, when attempting to run `make prepare' I get a spurious make syntax error: /home/earnest/linux/tools/objtool/.fixdep.o.cmd:1: *** missing separator. Stop. When inspecting `.fixdep.o.cmd' it includes two lines which use unescaped comment characters at the top: \# cannot find fixdep (/home/earnest/linux/tools/objtool//fixdep) \# using basic dep data This is because `tools/build/Build.include' prints these '\#' characters: printf '\# cannot find fixdep (%s)\n' $(fixdep) > $(dot-target).cmd; \ printf '\# using basic dep data\n\n' >> $(dot-target).cmd; \ This completes commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd files for future Make"). Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847 Cc: Randy Dunlap Cc: Rasmus Villemoes Cc: stable@vger.kernel.org Signed-off-by: Paul Menzel Signed-off-by: Masahiro Yamada --- tools/build/Build.include | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/build/Build.include b/tools/build/Build.include index a4bbb984941d..d9048f145f97 100644 --- a/tools/build/Build.include +++ b/tools/build/Build.include @@ -63,8 +63,8 @@ dep-cmd = $(if $(wildcard $(fixdep)), $(fixdep) $(depfile) $@ '$(make-cmd)' > $(dot-target).tmp; \ rm -f $(depfile); \ mv -f $(dot-target).tmp $(dot-target).cmd, \ - printf '\# cannot find fixdep (%s)\n' $(fixdep) > $(dot-target).cmd; \ - printf '\# using basic dep data\n\n' >> $(dot-target).cmd; \ + printf '$(pound) cannot find fixdep (%s)\n' $(fixdep) > $(dot-target).cmd; \ + printf '$(pound) using basic dep data\n\n' >> $(dot-target).cmd; \ cat $(depfile) >> $(dot-target).cmd; \ printf '\n%s\n' 'cmd_$@ := $(make-cmd)' >> $(dot-target).cmd) -- cgit v1.2.3 From 6fdbd824fd7a3876aac43d32fdf1f30b9ef72ce4 Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Mon, 9 Jul 2018 17:45:56 -0700 Subject: tools: build: Fixup host c flags Commit 0c3b7e42616f ("tools build: Add support for host programs format") introduced host_c_flags which referenced CHOSTFLAGS. The actual name of the variable is HOSTCFLAGS. Fix this up. Fixes: 0c3b7e42616f ("tools build: Add support for host programs format") Signed-off-by: Laura Abbott Acked-by: Jiri Olsa Signed-off-by: Masahiro Yamada --- tools/build/Build.include | 2 +- tools/perf/pmu-events/Build | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/build/Build.include b/tools/build/Build.include index d9048f145f97..950c1504ca37 100644 --- a/tools/build/Build.include +++ b/tools/build/Build.include @@ -98,4 +98,4 @@ cxx_flags = -Wp,-MD,$(depfile) -Wp,-MT,$@ $(CXXFLAGS) -D"BUILD_STR(s)=\#s" $(CXX ### ## HOSTCC C flags -host_c_flags = -Wp,-MD,$(depfile) -Wp,-MT,$@ $(CHOSTFLAGS) -D"BUILD_STR(s)=\#s" $(CHOSTFLAGS_$(basetarget).o) $(CHOSTFLAGS_$(obj)) +host_c_flags = -Wp,-MD,$(depfile) -Wp,-MT,$@ $(HOSTCFLAGS) -D"BUILD_STR(s)=\#s" $(HOSTCFLAGS_$(basetarget).o) $(HOSTCFLAGS_$(obj)) diff --git a/tools/perf/pmu-events/Build b/tools/perf/pmu-events/Build index 17783913d330..215ba30b8534 100644 --- a/tools/perf/pmu-events/Build +++ b/tools/perf/pmu-events/Build @@ -1,7 +1,7 @@ hostprogs := jevents jevents-y += json.o jsmn.o jevents.o -CHOSTFLAGS_jevents.o = -I$(srctree)/tools/include +HOSTCFLAGS_jevents.o = -I$(srctree)/tools/include pmu-events-y += pmu-events.o JDIR = pmu-events/arch/$(SRCARCH) JSON = $(shell [ -d $(JDIR) ] && \ -- cgit v1.2.3 From 8b247a92ebd0cda7dec49a6f771d9c4950f3d3ad Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Mon, 9 Jul 2018 17:45:57 -0700 Subject: tools: build: Use HOSTLDFLAGS with fixdep The final link of fixdep uses LDFLAGS but not the existing HOSTLDFLAGS. Fix this. Signed-off-by: Laura Abbott Acked-by: Jiri Olsa Signed-off-by: Masahiro Yamada --- tools/build/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/build/Makefile b/tools/build/Makefile index 5eb4b5ad79cb..5edf65e684ab 100644 --- a/tools/build/Makefile +++ b/tools/build/Makefile @@ -43,7 +43,7 @@ $(OUTPUT)fixdep-in.o: FORCE $(Q)$(MAKE) $(build)=fixdep $(OUTPUT)fixdep: $(OUTPUT)fixdep-in.o - $(QUIET_LINK)$(HOSTCC) $(LDFLAGS) -o $@ $< + $(QUIET_LINK)$(HOSTCC) $(HOSTLDFLAGS) -o $@ $< FORCE: -- cgit v1.2.3 From e23ba825db245724fec08d7285bc0272a57d38d4 Mon Sep 17 00:00:00 2001 From: Constantine Shulyupin Date: Wed, 11 Jul 2018 21:36:42 +0300 Subject: scripts/tags.sh: add __ro_after_init Signed-off-by: Constantine Shulyupin Signed-off-by: Masahiro Yamada --- scripts/tags.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/tags.sh b/scripts/tags.sh index 66f08bb1cce9..412a70cce558 100755 --- a/scripts/tags.sh +++ b/scripts/tags.sh @@ -245,7 +245,7 @@ exuberant() { setup_regex exuberant asm c all_target_sources | xargs $1 -a \ - -I __initdata,__exitdata,__initconst, \ + -I __initdata,__exitdata,__initconst,__ro_after_init \ -I __initdata_memblock \ -I __refdata,__attribute,__maybe_unused,__always_unused \ -I __acquires,__releases,__deprecated \ -- cgit v1.2.3 From 6d79a7b424a5630a6fcab31fd7c38af4ea9c9a0f Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 12 Jul 2018 19:38:36 +0900 Subject: kbuild: suppress warnings from 'getconf LFS_*' MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Suppress warnings for systems that do not recognize LFS_*. getconf: no such configuration parameter `LFS_CFLAGS' getconf: no such configuration parameter `LFS_LDFLAGS' getconf: no such configuration parameter `LFS_LIBS' Fixes: d7f14c66c273 ("kbuild: Enable Large File Support for hostprogs") Reported-by: Chen Feng Signed-off-by: Masahiro Yamada Acked-by: Uwe Kleine-König --- Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Makefile b/Makefile index 5b26847909ec..4a457302e3d4 100644 --- a/Makefile +++ b/Makefile @@ -353,9 +353,9 @@ CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ else if [ -x /bin/bash ]; then echo /bin/bash; \ else echo sh; fi ; fi) -HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS) -HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS) -HOST_LFS_LIBS := $(shell getconf LFS_LIBS) +HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null) +HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null) +HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null) HOSTCC = gcc HOSTCXX = g++ -- cgit v1.2.3 From 83fe6b8709f65bc505b10235bd82ece12c4c5099 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Tue, 10 Jul 2018 14:22:27 -0700 Subject: sch_fq_codel: zero q->flows_cnt when fq_codel_init fails When fq_codel_init fails, qdisc_create_dflt will cleanup by using qdisc_destroy. This function calls the ->reset() op prior to calling the ->destroy() op. Unfortunately, during the failure flow for sch_fq_codel, the ->flows parameter is not initialized, so the fq_codel_reset function will null pointer dereference. kernel: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 kernel: IP: fq_codel_reset+0x58/0xd0 [sch_fq_codel] kernel: PGD 0 P4D 0 kernel: Oops: 0000 [#1] SMP PTI kernel: Modules linked in: i40iw i40e(OE) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc devlink ebtable_filter ebtables ip6table_filter ip6_tables rpcrdma ib_isert iscsi_target_mod sunrpc ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate iTCO_wdt iTCO_vendor_support intel_uncore ib_core intel_rapl_perf mei_me mei joydev i2c_i801 lpc_ich ioatdma shpchp wmi sch_fq_codel xfs libcrc32c mgag200 ixgbe drm_kms_helper isci ttm firewire_ohci kernel: mdio drm igb libsas crc32c_intel firewire_core ptp pps_core scsi_transport_sas crc_itu_t dca i2c_algo_bit ipmi_si ipmi_devintf ipmi_msghandler [last unloaded: i40e] kernel: CPU: 10 PID: 4219 Comm: ip Tainted: G OE 4.16.13custom-fq-codel-test+ #3 kernel: Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.05.0004.051120151007 05/11/2015 kernel: RIP: 0010:fq_codel_reset+0x58/0xd0 [sch_fq_codel] kernel: RSP: 0018:ffffbfbf4c1fb620 EFLAGS: 00010246 kernel: RAX: 0000000000000400 RBX: 0000000000000000 RCX: 00000000000005b9 kernel: RDX: 0000000000000000 RSI: ffff9d03264a60c0 RDI: ffff9cfd17b31c00 kernel: RBP: 0000000000000001 R08: 00000000000260c0 R09: ffffffffb679c3e9 kernel: R10: fffff1dab06a0e80 R11: ffff9cfd163af800 R12: ffff9cfd17b31c00 kernel: R13: 0000000000000001 R14: ffff9cfd153de600 R15: 0000000000000001 kernel: FS: 00007fdec2f92800(0000) GS:ffff9d0326480000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000000008 CR3: 0000000c1956a006 CR4: 00000000000606e0 kernel: Call Trace: kernel: qdisc_destroy+0x56/0x140 kernel: qdisc_create_dflt+0x8b/0xb0 kernel: mq_init+0xc1/0xf0 kernel: qdisc_create_dflt+0x5a/0xb0 kernel: dev_activate+0x205/0x230 kernel: __dev_open+0xf5/0x160 kernel: __dev_change_flags+0x1a3/0x210 kernel: dev_change_flags+0x21/0x60 kernel: do_setlink+0x660/0xdf0 kernel: ? down_trylock+0x25/0x30 kernel: ? xfs_buf_trylock+0x1a/0xd0 [xfs] kernel: ? rtnl_newlink+0x816/0x990 kernel: ? _xfs_buf_find+0x327/0x580 [xfs] kernel: ? _cond_resched+0x15/0x30 kernel: ? kmem_cache_alloc+0x20/0x1b0 kernel: ? rtnetlink_rcv_msg+0x200/0x2f0 kernel: ? rtnl_calcit.isra.30+0x100/0x100 kernel: ? netlink_rcv_skb+0x4c/0x120 kernel: ? netlink_unicast+0x19e/0x260 kernel: ? netlink_sendmsg+0x1ff/0x3c0 kernel: ? sock_sendmsg+0x36/0x40 kernel: ? ___sys_sendmsg+0x295/0x2f0 kernel: ? ebitmap_cmp+0x6d/0x90 kernel: ? dev_get_by_name_rcu+0x73/0x90 kernel: ? skb_dequeue+0x52/0x60 kernel: ? __inode_wait_for_writeback+0x7f/0xf0 kernel: ? bit_waitqueue+0x30/0x30 kernel: ? fsnotify_grab_connector+0x3c/0x60 kernel: ? __sys_sendmsg+0x51/0x90 kernel: ? do_syscall_64+0x74/0x180 kernel: ? entry_SYSCALL_64_after_hwframe+0x3d/0xa2 kernel: Code: 00 00 48 89 87 00 02 00 00 8b 87 a0 01 00 00 85 c0 0f 84 84 00 00 00 31 ed 48 63 dd 83 c5 01 48 c1 e3 06 49 03 9c 24 90 01 00 00 <48> 8b 73 08 48 8b 3b e8 6c 9a 4f f6 48 8d 43 10 48 c7 03 00 00 kernel: RIP: fq_codel_reset+0x58/0xd0 [sch_fq_codel] RSP: ffffbfbf4c1fb620 kernel: CR2: 0000000000000008 kernel: ---[ end trace e81a62bede66274e ]--- This is caused because flows_cnt is non-zero, but flows hasn't been initialized. fq_codel_init has left the private data in a partially initialized state. To fix this, reset flows_cnt to 0 when we fail to initialize. Additionally, to make the state more consistent, also cleanup the flows pointer when the allocation of backlogs fails. This fixes the NULL pointer dereference, since both the for-loop and memset in fq_codel_reset will be no-ops when flow_cnt is zero. Signed-off-by: Jacob Keller Signed-off-by: David S. Miller --- net/sched/sch_fq_codel.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/net/sched/sch_fq_codel.c b/net/sched/sch_fq_codel.c index cd2e0e342fb6..6c0a9d5dbf94 100644 --- a/net/sched/sch_fq_codel.c +++ b/net/sched/sch_fq_codel.c @@ -479,24 +479,28 @@ static int fq_codel_init(struct Qdisc *sch, struct nlattr *opt, q->cparams.mtu = psched_mtu(qdisc_dev(sch)); if (opt) { - int err = fq_codel_change(sch, opt, extack); + err = fq_codel_change(sch, opt, extack); if (err) - return err; + goto init_failure; } err = tcf_block_get(&q->block, &q->filter_list, sch, extack); if (err) - return err; + goto init_failure; if (!q->flows) { q->flows = kvcalloc(q->flows_cnt, sizeof(struct fq_codel_flow), GFP_KERNEL); - if (!q->flows) - return -ENOMEM; + if (!q->flows) { + err = -ENOMEM; + goto init_failure; + } q->backlogs = kvcalloc(q->flows_cnt, sizeof(u32), GFP_KERNEL); - if (!q->backlogs) - return -ENOMEM; + if (!q->backlogs) { + err = -ENOMEM; + goto alloc_failure; + } for (i = 0; i < q->flows_cnt; i++) { struct fq_codel_flow *flow = q->flows + i; @@ -509,6 +513,13 @@ static int fq_codel_init(struct Qdisc *sch, struct nlattr *opt, else sch->flags &= ~TCQ_F_CAN_BYPASS; return 0; + +alloc_failure: + kvfree(q->flows); + q->flows = NULL; +init_failure: + q->flows_cnt = 0; + return err; } static int fq_codel_dump(struct Qdisc *sch, struct sk_buff *skb) -- cgit v1.2.3 From c7a897843224a92209f306c984975b704969b89d Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 12 Jul 2018 21:44:28 +0200 Subject: bpf: don't leave partial mangled prog in jit_subprogs error path syzkaller managed to trigger the following bug through fault injection: [...] [ 141.043668] verifier bug. No program starts at insn 3 [ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613 get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline] [ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613 fixup_call_args kernel/bpf/verifier.c:5587 [inline] [ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613 bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952 [ 141.047355] CPU: 3 PID: 4072 Comm: a.out Not tainted 4.18.0-rc4+ #51 [ 141.048446] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS 1.10.2-1 04/01/2014 [ 141.049877] Call Trace: [ 141.050324] __dump_stack lib/dump_stack.c:77 [inline] [ 141.050324] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 [ 141.050950] ? dump_stack_print_info.cold.2+0x52/0x52 lib/dump_stack.c:60 [ 141.051837] panic+0x238/0x4e7 kernel/panic.c:184 [ 141.052386] ? add_taint.cold.5+0x16/0x16 kernel/panic.c:385 [ 141.053101] ? __warn.cold.8+0x148/0x1ba kernel/panic.c:537 [ 141.053814] ? __warn.cold.8+0x117/0x1ba kernel/panic.c:530 [ 141.054506] ? get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline] [ 141.054506] ? fixup_call_args kernel/bpf/verifier.c:5587 [inline] [ 141.054506] ? bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952 [ 141.055163] __warn.cold.8+0x163/0x1ba kernel/panic.c:538 [ 141.055820] ? get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline] [ 141.055820] ? fixup_call_args kernel/bpf/verifier.c:5587 [inline] [ 141.055820] ? bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952 [...] What happens in jit_subprogs() is that kcalloc() for the subprog func buffer is failing with NULL where we then bail out. Latter is a plain return -ENOMEM, and this is definitely not okay since earlier in the loop we are walking all subprogs and temporarily rewrite insn->off to remember the subprog id as well as insn->imm to temporarily point the call to __bpf_call_base + 1 for the initial JIT pass. Thus, bailing out in such state and handing this over to the interpreter is troublesome since later/subsequent e.g. find_subprog() lookups are based on wrong insn->imm. Therefore, once we hit this point, we need to jump to out_free path where we undo all changes from earlier loop, so that interpreter can work on unmodified insn->{off,imm}. Another point is that should find_subprog() fail in jit_subprogs() due to a verifier bug, then we also should not simply defer the program to the interpreter since also here we did partial modifications. Instead we should just bail out entirely and return an error to the user who is trying to load the program. Fixes: 1c2a088a6626 ("bpf: x64: add JIT support for multi-function programs") Reported-by: syzbot+7d427828b2ea6e592804@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov --- kernel/bpf/verifier.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 9e2bf834f13a..63aaac52a265 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -5430,6 +5430,10 @@ static int jit_subprogs(struct bpf_verifier_env *env) if (insn->code != (BPF_JMP | BPF_CALL) || insn->src_reg != BPF_PSEUDO_CALL) continue; + /* Upon error here we cannot fall back to interpreter but + * need a hard reject of the program. Thus -EFAULT is + * propagated in any case. + */ subprog = find_subprog(env, i + insn->imm + 1); if (subprog < 0) { WARN_ONCE(1, "verifier bug. No program starts at insn %d\n", @@ -5450,7 +5454,7 @@ static int jit_subprogs(struct bpf_verifier_env *env) func = kcalloc(env->subprog_cnt, sizeof(prog), GFP_KERNEL); if (!func) - return -ENOMEM; + goto out_undo_insn; for (i = 0; i < env->subprog_cnt; i++) { subprog_start = subprog_end; @@ -5515,7 +5519,7 @@ static int jit_subprogs(struct bpf_verifier_env *env) tmp = bpf_int_jit_compile(func[i]); if (tmp != func[i] || func[i]->bpf_func != old_bpf_func) { verbose(env, "JIT doesn't support bpf-to-bpf calls\n"); - err = -EFAULT; + err = -ENOTSUPP; goto out_free; } cond_resched(); @@ -5552,6 +5556,7 @@ out_free: if (func[i]) bpf_jit_free(func[i]); kfree(func); +out_undo_insn: /* cleanup main prog to be interpreted */ prog->jit_requested = 0; for (i = 0, insn = prog->insnsi; i < prog->len; i++, insn++) { @@ -5578,6 +5583,8 @@ static int fixup_call_args(struct bpf_verifier_env *env) err = jit_subprogs(env); if (err == 0) return 0; + if (err == -EFAULT) + return err; } #ifndef CONFIG_BPF_JIT_ALWAYS_ON for (i = 0; i < prog->len; i++, insn++) { -- cgit v1.2.3 From 21684dc46c598e477707487c009f9773f7c0382d Mon Sep 17 00:00:00 2001 From: Stefan Baranoff Date: Tue, 10 Jul 2018 17:25:20 -0400 Subject: tcp: fix sequence numbers for repaired sockets re-using TIME-WAIT sockets This patch fixes a bug where the sequence numbers of a socket created using TCP repair functionality are lower than set after connect is called. This occurs when the repair socket overlaps with a TIME-WAIT socket and triggers the re-use code. The amount lower is equal to the number of times that a particular IP/port set is re-used and then put back into TIME-WAIT. Re-using the first time the sequence number is 1 lower, closing that socket and then re-opening (with repair) a new socket with the same addresses/ports puts the sequence number 2 lower than set via setsockopt. The third time is 3 lower, etc. I have not tested what the limit of this acrewal is, if any. The fix is, if a socket is in repair mode, to respect the already set sequence number and timestamp when it would have already re-used the TIME-WAIT socket. Signed-off-by: Stefan Baranoff Signed-off-by: David S. Miller --- net/ipv4/tcp_ipv4.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index bea17f1e8302..3b2711e33e4c 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -156,11 +156,24 @@ int tcp_twsk_unique(struct sock *sk, struct sock *sktw, void *twp) */ if (tcptw->tw_ts_recent_stamp && (!twp || (reuse && get_seconds() - tcptw->tw_ts_recent_stamp > 1))) { - tp->write_seq = tcptw->tw_snd_nxt + 65535 + 2; - if (tp->write_seq == 0) - tp->write_seq = 1; - tp->rx_opt.ts_recent = tcptw->tw_ts_recent; - tp->rx_opt.ts_recent_stamp = tcptw->tw_ts_recent_stamp; + /* In case of repair and re-using TIME-WAIT sockets we still + * want to be sure that it is safe as above but honor the + * sequence numbers and time stamps set as part of the repair + * process. + * + * Without this check re-using a TIME-WAIT socket with TCP + * repair would accumulate a -1 on the repair assigned + * sequence number. The first time it is reused the sequence + * is -1, the second time -2, etc. This fixes that issue + * without appearing to create any others. + */ + if (likely(!tp->repair)) { + tp->write_seq = tcptw->tw_snd_nxt + 65535 + 2; + if (tp->write_seq == 0) + tp->write_seq = 1; + tp->rx_opt.ts_recent = tcptw->tw_ts_recent; + tp->rx_opt.ts_recent_stamp = tcptw->tw_ts_recent_stamp; + } sock_hold(sktw); return 1; } -- cgit v1.2.3 From 70b7ff130224d2d22a158c7f4aa5e7fb1c95949d Mon Sep 17 00:00:00 2001 From: Stefan Baranoff Date: Tue, 10 Jul 2018 17:31:10 -0400 Subject: tcp: allow user to create repair socket without window probes Under rare conditions where repair code may be used it is possible that window probes are either unnecessary or undesired. If the user knows that window probes are not wanted or needed this change allows them to skip sending them when a socket comes out of repair. Signed-off-by: Stefan Baranoff Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 0d43705dd001..8e5e2ca9ab1b 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2823,14 +2823,16 @@ static int do_tcp_setsockopt(struct sock *sk, int level, case TCP_REPAIR: if (!tcp_can_repair_sock(sk)) err = -EPERM; - else if (val == 1) { - tp->repair = 1; + /* 1 for normal repair, 2 for no window probes */ + else if (val == 1 || val == 2) { + tp->repair = val; sk->sk_reuse = SK_FORCE_REUSE; tp->repair_queue = TCP_NO_QUEUE; } else if (val == 0) { tp->repair = 0; sk->sk_reuse = SK_NO_REUSE; - tcp_send_window_probe(sk); + if (tp->repair == 1) + tcp_send_window_probe(sk); } else err = -EINVAL; -- cgit v1.2.3 From abe41184abac487264a4904bfcff2d5500dccce6 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 10 Jul 2018 23:42:15 +0200 Subject: i2c: recovery: if possible send STOP with recovery pulses I2C clients may misunderstand recovery pulses if they can't read SDA to bail out early. In the worst case, as a write operation. To avoid that and if we can write SDA, try to send STOP to avoid the misinterpretation. Signed-off-by: Wolfram Sang Reviewed-by: Peter Rosin Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/i2c-core-base.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 31d16ada6e7d..301285c54603 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -198,7 +198,16 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap) val = !val; bri->set_scl(adap, val); - ndelay(RECOVERY_NDELAY); + + /* + * If we can set SDA, we will always create STOP here to ensure + * the additional pulses will do no harm. This is achieved by + * letting SDA follow SCL half a cycle later. + */ + ndelay(RECOVERY_NDELAY / 2); + if (bri->set_sda) + bri->set_sda(adap, val); + ndelay(RECOVERY_NDELAY / 2); } /* check if recovery actually succeeded */ -- cgit v1.2.3 From 9e3bff923913729d76d87f0015848ee7b8ff7083 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 11 Jul 2018 02:47:58 -0700 Subject: net: systemport: Fix CRC forwarding check for SYSTEMPORT Lite SYSTEMPORT Lite reversed the logic compared to SYSTEMPORT, the GIB_FCS_STRIP bit is set when the Ethernet FCS is stripped, and that bit is not set by default. Fix the logic such that we properly check whether that bit is set or not and we don't forward an extra 4 bytes to the network stack. Fixes: 44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcmsysport.c | 4 ++-- drivers/net/ethernet/broadcom/bcmsysport.h | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index d5fca2e5a9bc..a1f60f89e059 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -1946,8 +1946,8 @@ static int bcm_sysport_open(struct net_device *dev) if (!priv->is_lite) priv->crc_fwd = !!(umac_readl(priv, UMAC_CMD) & CMD_CRC_FWD); else - priv->crc_fwd = !!(gib_readl(priv, GIB_CONTROL) & - GIB_FCS_STRIP); + priv->crc_fwd = !((gib_readl(priv, GIB_CONTROL) & + GIB_FCS_STRIP) >> GIB_FCS_STRIP_SHIFT); phydev = of_phy_connect(dev, priv->phy_dn, bcm_sysport_adj_link, 0, priv->phy_interface); diff --git a/drivers/net/ethernet/broadcom/bcmsysport.h b/drivers/net/ethernet/broadcom/bcmsysport.h index d6e5d0cbf3a3..cf440b91fd04 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.h +++ b/drivers/net/ethernet/broadcom/bcmsysport.h @@ -278,7 +278,8 @@ struct bcm_rsb { #define GIB_GTX_CLK_EXT_CLK (0 << GIB_GTX_CLK_SEL_SHIFT) #define GIB_GTX_CLK_125MHZ (1 << GIB_GTX_CLK_SEL_SHIFT) #define GIB_GTX_CLK_250MHZ (2 << GIB_GTX_CLK_SEL_SHIFT) -#define GIB_FCS_STRIP (1 << 6) +#define GIB_FCS_STRIP_SHIFT 6 +#define GIB_FCS_STRIP (1 << GIB_FCS_STRIP_SHIFT) #define GIB_LCL_LOOP_EN (1 << 7) #define GIB_LCL_LOOP_TXEN (1 << 8) #define GIB_RMT_LOOP_EN (1 << 9) -- cgit v1.2.3 From 1c56c0994a533ce564843a0d17af7a3e6e68f269 Mon Sep 17 00:00:00 2001 From: Bert Kenward Date: Wed, 11 Jul 2018 11:44:25 +0100 Subject: sfc: avoid hang from nested use of the filter_sem In some situations we may end up calling down_read while already holding the semaphore for write, thus hanging. This has been seen when setting the MAC address for the interface. The hung task log in this situation includes this stack: down_read efx_ef10_filter_insert efx_ef10_filter_insert_addr_list efx_ef10_filter_vlan_sync_rx_mode efx_ef10_filter_add_vlan efx_ef10_filter_table_probe efx_ef10_set_mac_address efx_set_mac_address dev_set_mac_address In addition, lockdep rightly points out that nested calling of down_read is incorrect. Fixes: c2bebe37c6b6 ("sfc: give ef10 its own rwsem in the filter table instead of filter_lock") Tested-by: Jarod Wilson Signed-off-by: Bert Kenward Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/ef10.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index 23f0785c0573..7eeac3d6cfe8 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -4288,9 +4288,9 @@ static int efx_ef10_filter_pri(struct efx_ef10_filter_table *table, return -EPROTONOSUPPORT; } -static s32 efx_ef10_filter_insert(struct efx_nic *efx, - struct efx_filter_spec *spec, - bool replace_equal) +static s32 efx_ef10_filter_insert_locked(struct efx_nic *efx, + struct efx_filter_spec *spec, + bool replace_equal) { DECLARE_BITMAP(mc_rem_map, EFX_EF10_FILTER_SEARCH_LIMIT); struct efx_ef10_nic_data *nic_data = efx->nic_data; @@ -4307,7 +4307,7 @@ static s32 efx_ef10_filter_insert(struct efx_nic *efx, bool is_mc_recip; s32 rc; - down_read(&efx->filter_sem); + WARN_ON(!rwsem_is_locked(&efx->filter_sem)); table = efx->filter_state; down_write(&table->lock); @@ -4498,10 +4498,22 @@ out_unlock: if (rss_locked) mutex_unlock(&efx->rss_lock); up_write(&table->lock); - up_read(&efx->filter_sem); return rc; } +static s32 efx_ef10_filter_insert(struct efx_nic *efx, + struct efx_filter_spec *spec, + bool replace_equal) +{ + s32 ret; + + down_read(&efx->filter_sem); + ret = efx_ef10_filter_insert_locked(efx, spec, replace_equal); + up_read(&efx->filter_sem); + + return ret; +} + static void efx_ef10_filter_update_rx_scatter(struct efx_nic *efx) { /* no need to do anything here on EF10 */ @@ -5285,7 +5297,7 @@ static int efx_ef10_filter_insert_addr_list(struct efx_nic *efx, EFX_WARN_ON_PARANOID(ids[i] != EFX_EF10_FILTER_ID_INVALID); efx_filter_init_rx(&spec, EFX_FILTER_PRI_AUTO, filter_flags, 0); efx_filter_set_eth_local(&spec, vlan->vid, addr_list[i].addr); - rc = efx_ef10_filter_insert(efx, &spec, true); + rc = efx_ef10_filter_insert_locked(efx, &spec, true); if (rc < 0) { if (rollback) { netif_info(efx, drv, efx->net_dev, @@ -5314,7 +5326,7 @@ static int efx_ef10_filter_insert_addr_list(struct efx_nic *efx, efx_filter_init_rx(&spec, EFX_FILTER_PRI_AUTO, filter_flags, 0); eth_broadcast_addr(baddr); efx_filter_set_eth_local(&spec, vlan->vid, baddr); - rc = efx_ef10_filter_insert(efx, &spec, true); + rc = efx_ef10_filter_insert_locked(efx, &spec, true); if (rc < 0) { netif_warn(efx, drv, efx->net_dev, "Broadcast filter insert failed rc=%d\n", rc); @@ -5370,7 +5382,7 @@ static int efx_ef10_filter_insert_def(struct efx_nic *efx, if (vlan->vid != EFX_FILTER_VID_UNSPEC) efx_filter_set_eth_local(&spec, vlan->vid, NULL); - rc = efx_ef10_filter_insert(efx, &spec, true); + rc = efx_ef10_filter_insert_locked(efx, &spec, true); if (rc < 0) { const char *um = multicast ? "Multicast" : "Unicast"; const char *encap_name = ""; @@ -5430,7 +5442,7 @@ static int efx_ef10_filter_insert_def(struct efx_nic *efx, filter_flags, 0); eth_broadcast_addr(baddr); efx_filter_set_eth_local(&spec, vlan->vid, baddr); - rc = efx_ef10_filter_insert(efx, &spec, true); + rc = efx_ef10_filter_insert_locked(efx, &spec, true); if (rc < 0) { netif_warn(efx, drv, efx->net_dev, "Broadcast filter insert failed rc=%d\n", -- cgit v1.2.3 From 193f20033c54db0dc9563f722fbafbcd5fa0e80d Mon Sep 17 00:00:00 2001 From: Bert Kenward Date: Wed, 11 Jul 2018 11:45:10 +0100 Subject: sfc: hold filter_sem consistently during reset We should take and release the filter_sem consistently during the reset process, in the same manner as the mac_lock and reset_lock. For lockdep consistency we also take the filter_sem for write around other calls to efx->type->init(). Fixes: c2bebe37c6b6 ("sfc: give ef10 its own rwsem in the filter table instead of filter_lock") Signed-off-by: Bert Kenward Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/efx.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 570ec72266f3..ce3a177081a8 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -1871,12 +1871,6 @@ static void efx_remove_filters(struct efx_nic *efx) up_write(&efx->filter_sem); } -static void efx_restore_filters(struct efx_nic *efx) -{ - down_read(&efx->filter_sem); - efx->type->filter_table_restore(efx); - up_read(&efx->filter_sem); -} /************************************************************************** * @@ -2688,6 +2682,7 @@ void efx_reset_down(struct efx_nic *efx, enum reset_type method) efx_disable_interrupts(efx); mutex_lock(&efx->mac_lock); + down_write(&efx->filter_sem); mutex_lock(&efx->rss_lock); if (efx->port_initialized && method != RESET_TYPE_INVISIBLE && method != RESET_TYPE_DATAPATH) @@ -2745,9 +2740,8 @@ int efx_reset_up(struct efx_nic *efx, enum reset_type method, bool ok) if (efx->type->rx_restore_rss_contexts) efx->type->rx_restore_rss_contexts(efx); mutex_unlock(&efx->rss_lock); - down_read(&efx->filter_sem); - efx_restore_filters(efx); - up_read(&efx->filter_sem); + efx->type->filter_table_restore(efx); + up_write(&efx->filter_sem); if (efx->type->sriov_reset) efx->type->sriov_reset(efx); @@ -2764,6 +2758,7 @@ fail: efx->port_initialized = false; mutex_unlock(&efx->rss_lock); + up_write(&efx->filter_sem); mutex_unlock(&efx->mac_lock); return rc; @@ -3473,7 +3468,9 @@ static int efx_pci_probe_main(struct efx_nic *efx) efx_init_napi(efx); + down_write(&efx->filter_sem); rc = efx->type->init(efx); + up_write(&efx->filter_sem); if (rc) { netif_err(efx, probe, efx->net_dev, "failed to initialise NIC\n"); @@ -3765,7 +3762,9 @@ static int efx_pm_resume(struct device *dev) rc = efx->type->reset(efx, RESET_TYPE_ALL); if (rc) return rc; + down_write(&efx->filter_sem); rc = efx->type->init(efx); + up_write(&efx->filter_sem); if (rc) return rc; rc = efx_pm_thaw(dev); -- cgit v1.2.3 From 8b7008620b8452728cadead460a36f64ed78c460 Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Wed, 11 Jul 2018 14:39:42 +0200 Subject: net: Don't copy pfmemalloc flag in __copy_skb_header() The pfmemalloc flag indicates that the skb was allocated from the PFMEMALLOC reserves, and the flag is currently copied on skb copy and clone. However, an skb copied from an skb flagged with pfmemalloc wasn't necessarily allocated from PFMEMALLOC reserves, and on the other hand an skb allocated that way might be copied from an skb that wasn't. So we should not copy the flag on skb copy, and rather decide whether to allow an skb to be associated with sockets unrelated to page reclaim depending only on how it was allocated. Move the pfmemalloc flag before headers_start[0] using an existing 1-bit hole, so that __copy_skb_header() doesn't copy it. When cloning, we'll now take care of this flag explicitly, contravening to the warning comment of __skb_clone(). While at it, restore the newline usage introduced by commit b19372273164 ("net: reorganize sk_buff for faster __copy_skb_header()") to visually separate bytes used in bitfields after headers_start[0], that was gone after commit a9e419dc7be6 ("netfilter: merge ctinfo into nfct pointer storage area"), and describe the pfmemalloc flag in the kernel-doc structure comment. This doesn't change the size of sk_buff or cacheline boundaries, but consolidates the 15 bits hole before tc_index into a 2 bytes hole before csum, that could now be filled more easily. Reported-by: Patrick Talbert Fixes: c93bdd0e03e8 ("netvm: allow skb allocation to use PFMEMALLOC reserves") Signed-off-by: Stefano Brivio Signed-off-by: David S. Miller --- include/linux/skbuff.h | 10 +++++----- net/core/skbuff.c | 2 ++ 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 164cdedf6012..610a201126ee 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -630,6 +630,7 @@ typedef unsigned char *sk_buff_data_t; * @hash: the packet hash * @queue_mapping: Queue mapping for multiqueue devices * @xmit_more: More SKBs are pending for this queue + * @pfmemalloc: skbuff was allocated from PFMEMALLOC reserves * @ndisc_nodetype: router type (from link layer) * @ooo_okay: allow the mapping of a socket to a queue to be changed * @l4_hash: indicate hash is a canonical 4-tuple hash over transport @@ -735,7 +736,7 @@ struct sk_buff { peeked:1, head_frag:1, xmit_more:1, - __unused:1; /* one bit hole */ + pfmemalloc:1; /* fields enclosed in headers_start/headers_end are copied * using a single memcpy() in __copy_skb_header() @@ -754,31 +755,30 @@ struct sk_buff { __u8 __pkt_type_offset[0]; __u8 pkt_type:3; - __u8 pfmemalloc:1; __u8 ignore_df:1; - __u8 nf_trace:1; __u8 ip_summed:2; __u8 ooo_okay:1; + __u8 l4_hash:1; __u8 sw_hash:1; __u8 wifi_acked_valid:1; __u8 wifi_acked:1; - __u8 no_fcs:1; /* Indicates the inner headers are valid in the skbuff. */ __u8 encapsulation:1; __u8 encap_hdr_csum:1; __u8 csum_valid:1; + __u8 csum_complete_sw:1; __u8 csum_level:2; __u8 csum_not_inet:1; - __u8 dst_pending_confirm:1; #ifdef CONFIG_IPV6_NDISC_NODETYPE __u8 ndisc_nodetype:2; #endif __u8 ipvs_property:1; + __u8 inner_protocol_type:1; __u8 remcsum_offload:1; #ifdef CONFIG_NET_SWITCHDEV diff --git a/net/core/skbuff.c b/net/core/skbuff.c index eba8dae22c25..4df3164bb5fc 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -858,6 +858,8 @@ static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb) n->cloned = 1; n->nohdr = 0; n->peeked = 0; + if (skb->pfmemalloc) + n->pfmemalloc = 1; n->destructor = NULL; C(tail); C(end); -- cgit v1.2.3 From bab2c80e5a6c855657482eac9e97f5f3eedb509a Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Wed, 11 Jul 2018 12:00:44 -0400 Subject: nsh: set mac len based on inner packet When pulling the NSH header in nsh_gso_segment, set the mac length based on the encapsulated packet type. skb_reset_mac_len computes an offset to the network header, which here still points to the outer packet: > skb_reset_network_header(skb); > [...] > __skb_pull(skb, nsh_len); > skb_reset_mac_header(skb); // now mac hdr starts nsh_len == 8B after net hdr > skb_reset_mac_len(skb); // mac len = net hdr - mac hdr == (u16) -8 == 65528 > [..] > skb_mac_gso_segment(skb, ..) Link: http://lkml.kernel.org/r/CAF=yD-KeAcTSOn4AxirAxL8m7QAS8GBBe1w09eziYwvPbbUeYA@mail.gmail.com Reported-by: syzbot+7b9ed9872dab8c32305d@syzkaller.appspotmail.com Fixes: c411ed854584 ("nsh: add GSO support") Signed-off-by: Willem de Bruijn Acked-by: Jiri Benc Signed-off-by: David S. Miller --- net/nsh/nsh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/nsh/nsh.c b/net/nsh/nsh.c index 9696ef96b719..1a30e165eeb4 100644 --- a/net/nsh/nsh.c +++ b/net/nsh/nsh.c @@ -104,7 +104,7 @@ static struct sk_buff *nsh_gso_segment(struct sk_buff *skb, __skb_pull(skb, nsh_len); skb_reset_mac_header(skb); - skb_reset_mac_len(skb); + skb->mac_len = proto == htons(ETH_P_TEB) ? ETH_HLEN : 0; skb->protocol = proto; features &= NETIF_F_SG; -- cgit v1.2.3 From 993675a3100b16a4c80dfd70cbcde8ea7127b31d Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Wed, 11 Jul 2018 12:00:45 -0400 Subject: packet: reset network header if packet shorter than ll reserved space If variable length link layer headers result in a packet shorter than dev->hard_header_len, reset the network header offset. Else skb->mac_len may exceed skb->len after skb_mac_reset_len. packet_sendmsg_spkt already has similar logic. Fixes: b84bbaf7a6c8 ("packet: in packet_snd start writing at link layer allocation") Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller --- net/packet/af_packet.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 57634bc3da74..9b27d0cd766d 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -2878,6 +2878,8 @@ static int packet_snd(struct socket *sock, struct msghdr *msg, size_t len) goto out_free; } else if (reserve) { skb_reserve(skb, -reserve); + if (len < reserve) + skb_reset_network_header(skb); } /* Returns -EFAULT on error */ -- cgit v1.2.3 From f8494fa3dd10b52eab47a9666a8bc34719a129aa Mon Sep 17 00:00:00 2001 From: "Joel Fernandes (Google)" Date: Mon, 25 Jun 2018 17:08:22 -0700 Subject: tracing: Reorder display of TGID to be after PID Currently ftrace displays data in trace output like so: _-----=> irqs-off / _----=> need-resched | / _---=> hardirq/softirq || / _--=> preempt-depth ||| / delay TASK-PID CPU TGID |||| TIMESTAMP FUNCTION | | | | |||| | | bash-1091 [000] ( 1091) d..2 28.313544: sched_switch: However Android's trace visualization tools expect a slightly different format due to an out-of-tree patch patch that was been carried for a decade, notice that the TGID and CPU fields are reversed: _-----=> irqs-off / _----=> need-resched | / _---=> hardirq/softirq || / _--=> preempt-depth ||| / delay TASK-PID TGID CPU |||| TIMESTAMP FUNCTION | | | | |||| | | bash-1091 ( 1091) [002] d..2 64.965177: sched_switch: From kernel v4.13 onwards, during which TGID was introduced, tracing with systrace on all Android kernels will break (most Android kernels have been on 4.9 with Android patches, so this issues hasn't been seen yet). From v4.13 onwards things will break. The chrome browser's tracing tools also embed the systrace viewer which uses the legacy TGID format and updates to that are known to be difficult to make. Considering this, I suggest we make this change to the upstream kernel and backport it to all Android kernels. I believe this feature is merged recently enough into the upstream kernel that it shouldn't be a problem. Also logically, IMO it makes more sense to group the TGID with the TASK-PID and the CPU after these. Link: http://lkml.kernel.org/r/20180626000822.113931-1-joel@joelfernandes.org Cc: jreck@google.com Cc: tkjos@google.com Cc: stable@vger.kernel.org Fixes: 441dae8f2f29 ("tracing: Add support for display of tgid in trace output") Signed-off-by: Joel Fernandes (Google) Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace.c | 8 ++++---- kernel/trace/trace_output.c | 5 +++-- 2 files changed, 7 insertions(+), 6 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index f054bd6a1c66..87cf25171fb8 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3365,8 +3365,8 @@ static void print_func_help_header(struct trace_buffer *buf, struct seq_file *m, print_event_info(buf, m); - seq_printf(m, "# TASK-PID CPU# %s TIMESTAMP FUNCTION\n", tgid ? "TGID " : ""); - seq_printf(m, "# | | | %s | |\n", tgid ? " | " : ""); + seq_printf(m, "# TASK-PID %s CPU# TIMESTAMP FUNCTION\n", tgid ? "TGID " : ""); + seq_printf(m, "# | | %s | | |\n", tgid ? " | " : ""); } static void print_func_help_header_irq(struct trace_buffer *buf, struct seq_file *m, @@ -3386,9 +3386,9 @@ static void print_func_help_header_irq(struct trace_buffer *buf, struct seq_file tgid ? tgid_space : space); seq_printf(m, "# %s||| / delay\n", tgid ? tgid_space : space); - seq_printf(m, "# TASK-PID CPU#%s|||| TIMESTAMP FUNCTION\n", + seq_printf(m, "# TASK-PID %sCPU# |||| TIMESTAMP FUNCTION\n", tgid ? " TGID " : space); - seq_printf(m, "# | | | %s|||| | |\n", + seq_printf(m, "# | | %s | |||| | |\n", tgid ? " | " : space); } diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c index 90db994ac900..1c8e30fda46a 100644 --- a/kernel/trace/trace_output.c +++ b/kernel/trace/trace_output.c @@ -594,8 +594,7 @@ int trace_print_context(struct trace_iterator *iter) trace_find_cmdline(entry->pid, comm); - trace_seq_printf(s, "%16s-%-5d [%03d] ", - comm, entry->pid, iter->cpu); + trace_seq_printf(s, "%16s-%-5d ", comm, entry->pid); if (tr->trace_flags & TRACE_ITER_RECORD_TGID) { unsigned int tgid = trace_find_tgid(entry->pid); @@ -606,6 +605,8 @@ int trace_print_context(struct trace_iterator *iter) trace_seq_printf(s, "(%5d) ", tgid); } + trace_seq_printf(s, "[%03d] ", iter->cpu); + if (tr->trace_flags & TRACE_ITER_IRQ_INFO) trace_print_lat_fmt(s, entry); -- cgit v1.2.3 From 8f19f12bdcc612bf39d0dbae6d0509a4939aaac3 Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Wed, 11 Jul 2018 12:00:46 -0400 Subject: selftests: in udpgso_bench do not test udp zerocopy The udpgso benchmark compares various configurations of UDP and TCP. Including one that is not upstream, udp zerocopy. This is a leftover from the earlier RFC patchset. The test is part of kselftests and run in continuous spinners. Remove the failing case to make the test start passing. Fixes: 3a687bef148d ("selftests: udp gso benchmark") Reported-by: Naresh Kamboju Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller --- tools/testing/selftests/net/udpgso_bench.sh | 3 --- 1 file changed, 3 deletions(-) diff --git a/tools/testing/selftests/net/udpgso_bench.sh b/tools/testing/selftests/net/udpgso_bench.sh index 792fa4d0285e..850767befa47 100755 --- a/tools/testing/selftests/net/udpgso_bench.sh +++ b/tools/testing/selftests/net/udpgso_bench.sh @@ -35,9 +35,6 @@ run_udp() { echo "udp gso" run_in_netns ${args} -S - - echo "udp gso zerocopy" - run_in_netns ${args} -S -z } run_tcp() { -- cgit v1.2.3 From 0ce0bba4e5e0eb9b753bb821785de5d23c494392 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Thu, 12 Jul 2018 17:40:34 +0200 Subject: xen: setup pv irq ops vector earlier Setting pv_irq_ops for Xen PV domains should be done as early as possible in order to support e.g. very early printk() usage. The same applies to xen_vcpu_info_reset(0), as it is needed for the pv irq ops. Move the call of xen_setup_machphys_mapping() after initializing the pv functions as it contains a WARN_ON(), too. Remove the no longer necessary conditional in xen_init_irq_ops() from PVH V1 times to make clear this is a PV only function. Cc: # 4.14 Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Signed-off-by: Juergen Gross --- arch/x86/xen/enlighten_pv.c | 24 +++++++++++------------- arch/x86/xen/irq.c | 4 +--- 2 files changed, 12 insertions(+), 16 deletions(-) diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index 4816b6f82a9a..439a94bf89ad 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -1207,12 +1207,20 @@ asmlinkage __visible void __init xen_start_kernel(void) xen_setup_features(); - xen_setup_machphys_mapping(); - /* Install Xen paravirt ops */ pv_info = xen_info; pv_init_ops.patch = paravirt_patch_default; pv_cpu_ops = xen_cpu_ops; + xen_init_irq_ops(); + + /* + * Setup xen_vcpu early because it is needed for + * local_irq_disable(), irqs_disabled(), e.g. in printk(). + * + * Don't do the full vcpu_info placement stuff until we have + * the cpu_possible_mask and a non-dummy shared_info. + */ + xen_vcpu_info_reset(0); x86_platform.get_nmi_reason = xen_get_nmi_reason; @@ -1225,6 +1233,7 @@ asmlinkage __visible void __init xen_start_kernel(void) * Set up some pagetable state before starting to set any ptes. */ + xen_setup_machphys_mapping(); xen_init_mmu_ops(); /* Prevent unwanted bits from being set in PTEs. */ @@ -1250,20 +1259,9 @@ asmlinkage __visible void __init xen_start_kernel(void) get_cpu_cap(&boot_cpu_data); x86_configure_nx(); - xen_init_irq_ops(); - /* Let's presume PV guests always boot on vCPU with id 0. */ per_cpu(xen_vcpu_id, 0) = 0; - /* - * Setup xen_vcpu early because idt_setup_early_handler needs it for - * local_irq_disable(), irqs_disabled(). - * - * Don't do the full vcpu_info placement stuff until we have - * the cpu_possible_mask and a non-dummy shared_info. - */ - xen_vcpu_info_reset(0); - idt_setup_early_handler(); xen_init_capabilities(); diff --git a/arch/x86/xen/irq.c b/arch/x86/xen/irq.c index 74179852e46c..7515a19fd324 100644 --- a/arch/x86/xen/irq.c +++ b/arch/x86/xen/irq.c @@ -128,8 +128,6 @@ static const struct pv_irq_ops xen_irq_ops __initconst = { void __init xen_init_irq_ops(void) { - /* For PVH we use default pv_irq_ops settings. */ - if (!xen_feature(XENFEAT_hvm_callback_vector)) - pv_irq_ops = xen_irq_ops; + pv_irq_ops = xen_irq_ops; x86_init.irqs.intr_init = xen_init_IRQ; } -- cgit v1.2.3 From fd6792bb022e43faa0c4a45b6f25285e21206f9d Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Thu, 12 Jul 2018 12:22:44 +0200 Subject: rtc: fix alarm read and set offset The offset needs to be added after reading the alarm value. It also needs to be subtracted after the now < alarm test. Tested-by: Jon Hunter Signed-off-by: Alexandre Belloni --- drivers/rtc/interface.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index 6d4012dd6922..bac1eeb3d312 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -265,8 +265,10 @@ int __rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) return err; /* full-function RTCs won't have such missing fields */ - if (rtc_valid_tm(&alarm->time) == 0) + if (rtc_valid_tm(&alarm->time) == 0) { + rtc_add_offset(rtc, &alarm->time); return 0; + } /* get the "after" timestamp, to detect wrapped fields */ err = rtc_read_time(rtc, &now); @@ -409,7 +411,6 @@ static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) if (err) return err; - rtc_subtract_offset(rtc, &alarm->time); scheduled = rtc_tm_to_time64(&alarm->time); /* Make sure we're not setting alarms in the past */ @@ -426,6 +427,8 @@ static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) * over right here, before we set the alarm. */ + rtc_subtract_offset(rtc, &alarm->time); + if (!rtc->ops) err = -ENODEV; else if (!rtc->ops->set_alarm) @@ -467,7 +470,6 @@ int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) mutex_unlock(&rtc->ops_lock); - rtc_add_offset(rtc, &alarm->time); return err; } EXPORT_SYMBOL_GPL(rtc_set_alarm); -- cgit v1.2.3 From 2546da99212f22034aecf279da9c47cbfac6c981 Mon Sep 17 00:00:00 2001 From: Stephan Mueller Date: Sat, 7 Jul 2018 20:41:47 +0200 Subject: crypto: af_alg - Initialize sg_num_bytes in error code path The RX SGL in processing is already registered with the RX SGL tracking list to support proper cleanup. The cleanup code path uses the sg_num_bytes variable which must therefore be always initialized, even in the error code path. Signed-off-by: Stephan Mueller Reported-by: syzbot+9c251bdd09f83b92ba95@syzkaller.appspotmail.com #syz test: https://github.com/google/kmsan.git master CC: #4.14 Fixes: e870456d8e7c ("crypto: algif_skcipher - overhaul memory management") Fixes: d887c52d6ae4 ("crypto: algif_aead - overhaul memory management") Signed-off-by: Herbert Xu --- crypto/af_alg.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/crypto/af_alg.c b/crypto/af_alg.c index 7846c0c20cfe..b52a14fc3bae 100644 --- a/crypto/af_alg.c +++ b/crypto/af_alg.c @@ -1156,8 +1156,10 @@ int af_alg_get_rsgl(struct sock *sk, struct msghdr *msg, int flags, /* make one iovec available as scatterlist */ err = af_alg_make_sg(&rsgl->sgl, &msg->msg_iter, seglen); - if (err < 0) + if (err < 0) { + rsgl->sg_num_bytes = 0; return err; + } /* chain the new scatterlist with previous one */ if (areq->last_rsgl) -- cgit v1.2.3 From 20c5bbc640cdf8e23947990ab98f5ba950a3e1b0 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Wed, 20 Jun 2018 19:51:28 +0200 Subject: btrfs: restore uuid_mutex in btrfs_open_devices Commit 542c5908abfe84f7b4c1 ("btrfs: replace uuid_mutex by device_list_mutex in btrfs_open_devices") switched to device_list_mutex as we need that for the device list traversal, but we also need uuid_mutex to protect access to fs_devices::opened to be consistent with other users of that. Fixes: 542c5908abfe84f7b4c1 ("btrfs: replace uuid_mutex by device_list_mutex in btrfs_open_devices") Reviewed-by: Anand Jain Signed-off-by: David Sterba --- fs/btrfs/volumes.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index e034ad9e23b4..1da162928d1a 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1146,6 +1146,7 @@ int btrfs_open_devices(struct btrfs_fs_devices *fs_devices, { int ret; + mutex_lock(&uuid_mutex); mutex_lock(&fs_devices->device_list_mutex); if (fs_devices->opened) { fs_devices->opened++; @@ -1155,6 +1156,7 @@ int btrfs_open_devices(struct btrfs_fs_devices *fs_devices, ret = open_fs_devices(fs_devices, flags, holder); } mutex_unlock(&fs_devices->device_list_mutex); + mutex_unlock(&uuid_mutex); return ret; } -- cgit v1.2.3 From 509d7648135f914a3dd64c17484b33df5dd0a19c Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Wed, 11 Jul 2018 10:12:49 +0200 Subject: xsk: do not return ENXIO from TX copy mode This patch removes the ENXIO return code from TX copy-mode when someone has forcefully changed the number of queues on the device so that the queue bound to the socket is no longer available. Just silently stop sending anything as in zero-copy mode so the error reporting gets consistent between the two modes. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson Signed-off-by: Daniel Borkmann --- net/xdp/xsk.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 7d220cbd09b6..08d09115093e 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -244,10 +244,8 @@ static int xsk_generic_xmit(struct sock *sk, struct msghdr *m, goto out; } - if (xs->queue_id >= xs->dev->real_num_tx_queues) { - err = -ENXIO; + if (xs->queue_id >= xs->dev->real_num_tx_queues) goto out; - } skb = sock_alloc_send_skb(sk, len, 1, &err); if (unlikely(!skb)) { -- cgit v1.2.3 From 9684f5e7c8cdf076aeec81344d4893a30f7aa6a1 Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Wed, 11 Jul 2018 10:12:50 +0200 Subject: xsk: do not return EAGAIN from sendmsg when completion queue is full This patch stops returning EAGAIN in TX copy mode when the completion queue is full as zero-copy does not do this. Instead this situation can be detected by comparing the head and tail pointers of the completion queue in both modes. In any case, EAGAIN was not the correct error code here since no amount of calling sendmsg will solve the problem. Only consuming one or more messages on the completion queue will fix this. With this patch, the error reporting becomes consistent between copy mode and zero-copy mode. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson Signed-off-by: Daniel Borkmann --- net/xdp/xsk.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 08d09115093e..87567232d0f8 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -233,10 +233,8 @@ static int xsk_generic_xmit(struct sock *sk, struct msghdr *m, goto out; } - if (xskq_reserve_addr(xs->umem->cq)) { - err = -EAGAIN; + if (xskq_reserve_addr(xs->umem->cq)) goto out; - } len = desc.len; if (unlikely(len > xs->dev->mtu)) { -- cgit v1.2.3 From 6efb4436f7fcc50cc3fb9a113d0f16e3968172b1 Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Wed, 11 Jul 2018 10:12:51 +0200 Subject: xsk: always return ENOBUFS from sendmsg if there is no TX queue This patch makes sure ENOBUFS is always returned from sendmsg if there is no TX queue configured. This was not the case for zero-copy mode. With this patch this error reporting is consistent between copy mode and zero-copy mode. Fixes: ac98d8aab61b ("xsk: wire upp Tx zero-copy functions") Signed-off-by: Magnus Karlsson Signed-off-by: Daniel Borkmann --- net/xdp/xsk.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 87567232d0f8..9c784307f7b0 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -218,9 +218,6 @@ static int xsk_generic_xmit(struct sock *sk, struct msghdr *m, struct sk_buff *skb; int err = 0; - if (unlikely(!xs->tx)) - return -ENOBUFS; - mutex_lock(&xs->mutex); while (xskq_peek_desc(xs->tx, &desc)) { @@ -296,6 +293,8 @@ static int xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len) return -ENXIO; if (unlikely(!(xs->dev->flags & IFF_UP))) return -ENETDOWN; + if (unlikely(!xs->tx)) + return -ENOBUFS; if (need_wait) return -EOPNOTSUPP; -- cgit v1.2.3 From 09210c4bcc065d9d91ef3c051902ad18252cd3c0 Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Wed, 11 Jul 2018 10:12:52 +0200 Subject: xsk: do not return EMSGSIZE in copy mode for packets larger than MTU This patch stops returning EMSGSIZE from sendmsg in copy mode when the size of the packet is larger than the MTU. Just send it to the device so that it will drop it as in zero-copy mode. This makes the error reporting consistent between copy mode and zero-copy mode. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson Signed-off-by: Daniel Borkmann --- net/xdp/xsk.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 9c784307f7b0..72335c2e8108 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -233,15 +233,10 @@ static int xsk_generic_xmit(struct sock *sk, struct msghdr *m, if (xskq_reserve_addr(xs->umem->cq)) goto out; - len = desc.len; - if (unlikely(len > xs->dev->mtu)) { - err = -EMSGSIZE; - goto out; - } - if (xs->queue_id >= xs->dev->real_num_tx_queues) goto out; + len = desc.len; skb = sock_alloc_send_skb(sk, len, 1, &err); if (unlikely(!skb)) { err = -EAGAIN; -- cgit v1.2.3 From 97b191702b05a7cb9fa6d846adba68419cbbc7a6 Mon Sep 17 00:00:00 2001 From: Naohiro Aota Date: Fri, 13 Jul 2018 23:07:20 +0900 Subject: btrfs: fix use-after-free of cmp workspace pages btrfs_cmp_data_free() puts cmp's src_pages and dst_pages, but leaves their page address intact. Now, if you hit "goto again" in btrfs_extent_same_range() and hit some error in btrfs_cmp_data_prepare(), you'll try to unlock/put already put pages. This is simple fix to reset the address to avoid use-after-free. Fixes: 67b07bd4bec5 ("Btrfs: reuse cmp workspace in EXTENT_SAME ioctl") Signed-off-by: Naohiro Aota Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index a4d2856a4df1..aa914aaa00f8 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3327,11 +3327,13 @@ static void btrfs_cmp_data_free(struct cmp_pages *cmp) if (pg) { unlock_page(pg); put_page(pg); + cmp->src_pages[i] = NULL; } pg = cmp->dst_pages[i]; if (pg) { unlock_page(pg); put_page(pg); + cmp->dst_pages[i] = NULL; } } } -- cgit v1.2.3 From 02ce6ce2e1d07e31e8314c761a2caa087ea094ce Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 12 Jul 2018 08:38:09 -0500 Subject: drm/amdgpu/pp/smu7: use a local variable for toc indexing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Rather than using the index variable stored in vram. If the device fails to come back online after a resume cycle, reads from vram will return all 1s which will cause a segfault. Based on a patch from Thomas Martitz . This avoids the segfault, but we still need to sort out why the GPU does not come back online after a resume. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105760 Acked-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c | 23 +++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c index d644a9bb9078..9f407c48d4f0 100644 --- a/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c +++ b/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c @@ -381,6 +381,7 @@ int smu7_request_smu_load_fw(struct pp_hwmgr *hwmgr) uint32_t fw_to_load; int result = 0; struct SMU_DRAMData_TOC *toc; + uint32_t num_entries = 0; if (!hwmgr->reload_fw) { pr_info("skip reloading...\n"); @@ -422,41 +423,41 @@ int smu7_request_smu_load_fw(struct pp_hwmgr *hwmgr) } toc = (struct SMU_DRAMData_TOC *)smu_data->header; - toc->num_entries = 0; toc->structure_version = 1; PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_RLC_G, &toc->entry[toc->num_entries++]), + UCODE_ID_RLC_G, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_CP_CE, &toc->entry[toc->num_entries++]), + UCODE_ID_CP_CE, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_CP_PFP, &toc->entry[toc->num_entries++]), + UCODE_ID_CP_PFP, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_CP_ME, &toc->entry[toc->num_entries++]), + UCODE_ID_CP_ME, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_CP_MEC, &toc->entry[toc->num_entries++]), + UCODE_ID_CP_MEC, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_CP_MEC_JT1, &toc->entry[toc->num_entries++]), + UCODE_ID_CP_MEC_JT1, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_CP_MEC_JT2, &toc->entry[toc->num_entries++]), + UCODE_ID_CP_MEC_JT2, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_SDMA0, &toc->entry[toc->num_entries++]), + UCODE_ID_SDMA0, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_SDMA1, &toc->entry[toc->num_entries++]), + UCODE_ID_SDMA1, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); if (!hwmgr->not_vf) PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_MEC_STORAGE, &toc->entry[toc->num_entries++]), + UCODE_ID_MEC_STORAGE, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); + toc->num_entries = num_entries; smu7_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_DRV_DRAM_ADDR_HI, upper_32_bits(smu_data->header_buffer.mc_addr)); smu7_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_DRV_DRAM_ADDR_LO, lower_32_bits(smu_data->header_buffer.mc_addr)); -- cgit v1.2.3 From e78bfb0751d4e312699106ba7efbed2bab1a53ca Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Fri, 13 Jul 2018 13:21:07 +0200 Subject: skbuff: Unconditionally copy pfmemalloc in __skb_clone() Commit 8b7008620b84 ("net: Don't copy pfmemalloc flag in __copy_skb_header()") introduced a different handling for the pfmemalloc flag in copy and clone paths. In __skb_clone(), now, the flag is set only if it was set in the original skb, but not cleared if it wasn't. This is wrong and might lead to socket buffers being flagged with pfmemalloc even if the skb data wasn't allocated from pfmemalloc reserves. Copy the flag instead of ORing it. Reported-by: Sabrina Dubroca Fixes: 8b7008620b84 ("net: Don't copy pfmemalloc flag in __copy_skb_header()") Signed-off-by: Stefano Brivio Tested-by: Sabrina Dubroca Signed-off-by: David S. Miller --- net/core/skbuff.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 4df3164bb5fc..8e51f8555e11 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -858,8 +858,7 @@ static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb) n->cloned = 1; n->nohdr = 0; n->peeked = 0; - if (skb->pfmemalloc) - n->pfmemalloc = 1; + C(pfmemalloc); n->destructor = NULL; C(tail); C(end); -- cgit v1.2.3 From c3086637b0d7dbee0925697f8dbee2bcf9637b9f Mon Sep 17 00:00:00 2001 From: Michael Heimpold Date: Wed, 11 Jul 2018 23:10:55 +0200 Subject: net: ethtool: fix spelling mistake: "tubale" -> "tunable" Signed-off-by: Michael Heimpold Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 4ca65b56084f..7363f18e65a5 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -226,7 +226,7 @@ enum tunable_id { ETHTOOL_TX_COPYBREAK, ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */ /* - * Add your fresh new tubale attribute above and remember to update + * Add your fresh new tunable attribute above and remember to update * tunable_strings[] in net/core/ethtool.c */ __ETHTOOL_TUNABLE_COUNT, -- cgit v1.2.3 From 5fc853cc01c68f84984ecc2d5fd777ecad78240f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 12 Jul 2018 15:23:45 +0300 Subject: qlogic: check kstrtoul() for errors We accidentally left out the error handling for kstrtoul(). Fixes: a520030e326a ("qlcnic: Implement flash sysfs callback for 83xx adapter") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c index 891f03a7a33d..8d7b9bb910f2 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c @@ -1128,6 +1128,8 @@ static ssize_t qlcnic_83xx_sysfs_flash_write_handler(struct file *filp, struct qlcnic_adapter *adapter = dev_get_drvdata(dev); ret = kstrtoul(buf, 16, &data); + if (ret) + return ret; switch (data) { case QLC_83XX_FLASH_SECTOR_ERASE_CMD: -- cgit v1.2.3 From b0c05d0e99d98d7f0cd41efc1eeec94efdc3325d Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Thu, 12 Jul 2018 06:04:52 -0700 Subject: tcp: fix dctcp delayed ACK schedule Previously, when a data segment was sent an ACK was piggybacked on the data segment without generating a CA_EVENT_NON_DELAYED_ACK event to notify congestion control modules. So the DCTCP ca->delayed_ack_reserved flag could incorrectly stay set when in fact there were no delayed ACKs being reserved. This could result in sending a special ECN notification ACK that carries an older ACK sequence, when in fact there was no need for such an ACK. DCTCP keeps track of the delayed ACK status with its own separate state ca->delayed_ack_reserved. Previously it may accidentally cancel the delayed ACK without updating this field upon sending a special ACK that carries a older ACK sequence. This inconsistency would lead to DCTCP receiver never acknowledging the latest data until the sender times out and retry in some cases. Packetdrill script (provided by Larry Brakmo) 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < [ect0] SEW 0:0(0) win 32792 0.100 > SE. 0:0(0) ack 1 0.110 < [ect0] . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 0.200 < [ect0] . 1:1001(1000) ack 1 win 257 0.200 > [ect01] . 1:1(0) ack 1001 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 1:2(1) ack 1001 0.200 < [ect0] . 1001:2001(1000) ack 2 win 257 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 2:3(1) ack 2001 0.200 < [ect0] . 2001:3001(1000) ack 3 win 257 0.200 < [ect0] . 3001:4001(1000) ack 3 win 257 0.200 > [ect01] . 3:3(0) ack 4001 0.210 < [ce] P. 4001:4501(500) ack 3 win 257 +0.001 read(4, ..., 4500) = 4500 +0 write(4, ..., 1) = 1 +0 > [ect01] PE. 3:4(1) ack 4501 +0.010 < [ect0] W. 4501:5501(1000) ack 4 win 257 // Previously the ACK sequence below would be 4501, causing a long RTO +0.040~+0.045 > [ect01] . 4:4(0) ack 5501 // delayed ack +0.311 < [ect0] . 5501:6501(1000) ack 4 win 257 // More data +0 > [ect01] . 4:4(0) ack 6501 // now acks everything +0.500 < F. 9501:9501(0) ack 4 win 257 Reported-by: Larry Brakmo Signed-off-by: Yuchung Cheng Signed-off-by: Eric Dumazet Acked-by: Neal Cardwell Acked-by: Lawrence Brakmo Signed-off-by: David S. Miller --- net/ipv4/tcp_dctcp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_dctcp.c b/net/ipv4/tcp_dctcp.c index 5f5e5936760e..89f88b0d8167 100644 --- a/net/ipv4/tcp_dctcp.c +++ b/net/ipv4/tcp_dctcp.c @@ -134,7 +134,8 @@ static void dctcp_ce_state_0_to_1(struct sock *sk) /* State has changed from CE=0 to CE=1 and delayed * ACK has not sent yet. */ - if (!ca->ce_state && ca->delayed_ack_reserved) { + if (!ca->ce_state && + inet_csk(sk)->icsk_ack.pending & ICSK_ACK_TIMER) { u32 tmp_rcv_nxt; /* Save current rcv_nxt. */ @@ -164,7 +165,8 @@ static void dctcp_ce_state_1_to_0(struct sock *sk) /* State has changed from CE=1 to CE=0 and delayed * ACK has not sent yet. */ - if (ca->ce_state && ca->delayed_ack_reserved) { + if (ca->ce_state && + inet_csk(sk)->icsk_ack.pending & ICSK_ACK_TIMER) { u32 tmp_rcv_nxt; /* Save current rcv_nxt. */ -- cgit v1.2.3 From a69258f7aa2623e0930212f09c586fd06674ad79 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Thu, 12 Jul 2018 06:04:53 -0700 Subject: tcp: remove DELAYED ACK events in DCTCP After fixing the way DCTCP tracking delayed ACKs, the delayed-ACK related callbacks are no longer needed Signed-off-by: Yuchung Cheng Signed-off-by: Eric Dumazet Acked-by: Neal Cardwell Acked-by: Lawrence Brakmo Signed-off-by: David S. Miller --- include/net/tcp.h | 2 -- net/ipv4/tcp_dctcp.c | 25 ------------------------- net/ipv4/tcp_output.c | 4 ---- 3 files changed, 31 deletions(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index af3ec72d5d41..3482d13d655b 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -912,8 +912,6 @@ enum tcp_ca_event { CA_EVENT_LOSS, /* loss timeout */ CA_EVENT_ECN_NO_CE, /* ECT set, but not CE marked */ CA_EVENT_ECN_IS_CE, /* received CE marked IP packet */ - CA_EVENT_DELAYED_ACK, /* Delayed ack is sent */ - CA_EVENT_NON_DELAYED_ACK, }; /* Information about inbound ACK, passed to cong_ops->in_ack_event() */ diff --git a/net/ipv4/tcp_dctcp.c b/net/ipv4/tcp_dctcp.c index 89f88b0d8167..5869f89ca656 100644 --- a/net/ipv4/tcp_dctcp.c +++ b/net/ipv4/tcp_dctcp.c @@ -55,7 +55,6 @@ struct dctcp { u32 dctcp_alpha; u32 next_seq; u32 ce_state; - u32 delayed_ack_reserved; u32 loss_cwnd; }; @@ -96,7 +95,6 @@ static void dctcp_init(struct sock *sk) ca->dctcp_alpha = min(dctcp_alpha_on_init, DCTCP_MAX_ALPHA); - ca->delayed_ack_reserved = 0; ca->loss_cwnd = 0; ca->ce_state = 0; @@ -250,25 +248,6 @@ static void dctcp_state(struct sock *sk, u8 new_state) } } -static void dctcp_update_ack_reserved(struct sock *sk, enum tcp_ca_event ev) -{ - struct dctcp *ca = inet_csk_ca(sk); - - switch (ev) { - case CA_EVENT_DELAYED_ACK: - if (!ca->delayed_ack_reserved) - ca->delayed_ack_reserved = 1; - break; - case CA_EVENT_NON_DELAYED_ACK: - if (ca->delayed_ack_reserved) - ca->delayed_ack_reserved = 0; - break; - default: - /* Don't care for the rest. */ - break; - } -} - static void dctcp_cwnd_event(struct sock *sk, enum tcp_ca_event ev) { switch (ev) { @@ -278,10 +257,6 @@ static void dctcp_cwnd_event(struct sock *sk, enum tcp_ca_event ev) case CA_EVENT_ECN_NO_CE: dctcp_ce_state_1_to_0(sk); break; - case CA_EVENT_DELAYED_ACK: - case CA_EVENT_NON_DELAYED_ACK: - dctcp_update_ack_reserved(sk, ev); - break; default: /* Don't care for the rest. */ break; diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 8e08b409c71e..00e5a300ddb9 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -3523,8 +3523,6 @@ void tcp_send_delayed_ack(struct sock *sk) int ato = icsk->icsk_ack.ato; unsigned long timeout; - tcp_ca_event(sk, CA_EVENT_DELAYED_ACK); - if (ato > TCP_DELACK_MIN) { const struct tcp_sock *tp = tcp_sk(sk); int max_ato = HZ / 2; @@ -3581,8 +3579,6 @@ void tcp_send_ack(struct sock *sk) if (sk->sk_state == TCP_CLOSE) return; - tcp_ca_event(sk, CA_EVENT_NON_DELAYED_ACK); - /* We are not putting this on the write queue, so * tcp_transmit_skb() will set the ownership to this * sock. -- cgit v1.2.3 From fafa35cce34ba4c4f6fd7f1026c038de0a2884af Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Fri, 22 Jun 2018 11:49:04 +0800 Subject: pinctrl: mt7622: fix error path on failing at groups building It should be to return an error code when failing at groups building. Cc: stable@vger.kernel.org Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang Signed-off-by: Linus Walleij --- drivers/pinctrl/mediatek/pinctrl-mt7622.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7622.c b/drivers/pinctrl/mediatek/pinctrl-mt7622.c index e3f1ab2290fc..9ad8cb7730d3 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt7622.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c @@ -1703,7 +1703,7 @@ static int mtk_pinctrl_probe(struct platform_device *pdev) err = mtk_build_groups(hw); if (err) { dev_err(&pdev->dev, "Failed to build groups\n"); - return 0; + return err; } /* Setup functions descriptions per SoC types */ -- cgit v1.2.3 From 8875059d2165f22236e87ed10188b0e18f116b93 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Fri, 22 Jun 2018 11:49:05 +0800 Subject: pinctrl: mt7622: fix initialization sequence between eint and gpiochip Because gpichip applied in the driver must depend on mtk eint to implement the input data debouncing and the translation between gpio and irq, it's better to keep logic consistent with mtk eint being built prior to gpiochip being added. Cc: stable@vger.kernel.org Fixes: e6dabd38d8e7 ("pinctrl: mediatek: add EINT support to MT7622 SoC") Signed-off-by: Sean Wang Signed-off-by: Linus Walleij --- drivers/pinctrl/mediatek/pinctrl-mt7622.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7622.c b/drivers/pinctrl/mediatek/pinctrl-mt7622.c index 9ad8cb7730d3..e9eba62da233 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt7622.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c @@ -1713,17 +1713,17 @@ static int mtk_pinctrl_probe(struct platform_device *pdev) return err; } + err = mtk_build_eint(hw, pdev); + if (err) + dev_warn(&pdev->dev, + "Failed to add EINT, but pinctrl still can work\n"); + err = mtk_build_gpiochip(hw, pdev->dev.of_node); if (err) { dev_err(&pdev->dev, "Failed to add gpio_chip\n"); return err; } - err = mtk_build_eint(hw, pdev); - if (err) - dev_warn(&pdev->dev, - "Failed to add EINT, but pinctrl still can work\n"); - platform_set_drvdata(pdev, hw); return 0; -- cgit v1.2.3 From ae6efcae79dd2888243634b69fce51208b650192 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Fri, 22 Jun 2018 11:49:06 +0800 Subject: pinctrl: mt7622: fix that pinctrl_claim_hogs cannot work To allow claiming hogs by pinctrl, we cannot enable pinctrl until all groups and functions are being added done. Also, it's necessary that the corresponding gpiochip is being added when the pinctrl device is enabled. Cc: stable@vger.kernel.org Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang Signed-off-by: Linus Walleij --- drivers/pinctrl/mediatek/pinctrl-mt7622.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7622.c b/drivers/pinctrl/mediatek/pinctrl-mt7622.c index e9eba62da233..42155d4e7f1b 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt7622.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c @@ -1695,9 +1695,10 @@ static int mtk_pinctrl_probe(struct platform_device *pdev) mtk_desc.custom_conf_items = mtk_conf_items; #endif - hw->pctrl = devm_pinctrl_register(&pdev->dev, &mtk_desc, hw); - if (IS_ERR(hw->pctrl)) - return PTR_ERR(hw->pctrl); + err = devm_pinctrl_register_and_init(&pdev->dev, &mtk_desc, hw, + &hw->pctrl); + if (err) + return err; /* Setup groups descriptions per SoC types */ err = mtk_build_groups(hw); @@ -1713,11 +1714,19 @@ static int mtk_pinctrl_probe(struct platform_device *pdev) return err; } + /* For able to make pinctrl_claim_hogs, we must not enable pinctrl + * until all groups and functions are being added one. + */ + err = pinctrl_enable(hw->pctrl); + if (err) + return err; + err = mtk_build_eint(hw, pdev); if (err) dev_warn(&pdev->dev, "Failed to add EINT, but pinctrl still can work\n"); + /* Build gpiochip should be after pinctrl_enable is done */ err = mtk_build_gpiochip(hw, pdev->dev.of_node); if (err) { dev_err(&pdev->dev, "Failed to add gpio_chip\n"); -- cgit v1.2.3 From de227ed7965d06dcfcd06376e03c107004a4881c Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Fri, 22 Jun 2018 11:49:07 +0800 Subject: pinctrl: mt7622: stop using the deprecated pinctrl_add_gpio_range If the pinctrl node has the gpio-ranges property, the range will be added by the gpio core and doesn't need to be added by the pinctrl driver. But for keeping backward compatibility, an explicit pinctrl_add_gpio_range is still needed to be called when there is a missing gpio-ranges in pinctrl node in old dts files. Cc: stable@vger.kernel.org Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang Signed-off-by: Linus Walleij --- drivers/pinctrl/mediatek/pinctrl-mt7622.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7622.c b/drivers/pinctrl/mediatek/pinctrl-mt7622.c index 42155d4e7f1b..055074bba246 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt7622.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c @@ -1508,11 +1508,20 @@ static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np) if (ret < 0) return ret; - ret = gpiochip_add_pin_range(chip, dev_name(hw->dev), 0, 0, - chip->ngpio); - if (ret < 0) { - gpiochip_remove(chip); - return ret; + /* Just for backward compatible for these old pinctrl nodes without + * "gpio-ranges" property. Otherwise, called directly from a + * DeviceTree-supported pinctrl driver is DEPRECATED. + * Please see Section 2.1 of + * Documentation/devicetree/bindings/gpio/gpio.txt on how to + * bind pinctrl and gpio drivers via the "gpio-ranges" property. + */ + if (!of_find_property(np, "gpio-ranges", NULL)) { + ret = gpiochip_add_pin_range(chip, dev_name(hw->dev), 0, 0, + chip->ngpio); + if (ret < 0) { + gpiochip_remove(chip); + return ret; + } } return 0; -- cgit v1.2.3 From 5b1c4bf2519efc2328d252fd7697bdfb306f10f3 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Fri, 22 Jun 2018 11:49:08 +0800 Subject: pinctrl: mt7622: fix a kernel panic when gpio-hog is being applied When we are explicitly using GPIO hogging mechanism in the pinctrl node, such as: &pio { line_input { gpio-hog; gpios = <95 0>, <96 0>, <97 0>; input; }; }; A kernel panic happens at dereferencing a NULL pointer: In this case, the drvdata is still not setup properly yet when it is being accessed. A better solution for fixing up this issue should be we should obtain the private data from struct gpio_chip using a specific gpiochip_get_data instead of a generic dev_get_drvdata. [ 0.249424] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 0.257818] Mem abort info: [ 0.260704] ESR = 0x96000005 [ 0.263869] Exception class = DABT (current EL), IL = 32 bits [ 0.270011] SET = 0, FnV = 0 [ 0.273167] EA = 0, S1PTW = 0 [ 0.276421] Data abort info: [ 0.279398] ISV = 0, ISS = 0x00000005 [ 0.283372] CM = 0, WnR = 0 [ 0.286440] [00000000000000c8] user address but active_mm is swapper [ 0.293027] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 0.298795] Modules linked in: [ 0.301958] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ #389 [ 0.308716] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 0.314396] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 0.319362] pc : mtk_hw_pin_field_get+0x28/0x118 [ 0.324140] lr : mtk_hw_set_value+0x30/0x104 [ 0.328557] sp : ffffff800801b6d0 [ 0.331983] x29: ffffff800801b6d0 x28: ffffff80086b7970 [ 0.337484] x27: 0000000000000000 x26: ffffff80087b8000 [ 0.342986] x25: 0000000000000000 x24: ffffffc00324c230 [ 0.348487] x23: 0000000000000003 x22: 0000000000000000 [ 0.353988] x21: ffffff80087b8000 x20: 0000000000000000 [ 0.359489] x19: 0000000000000054 x18: 00000000fffff7c0 [ 0.364990] x17: 0000000000006300 x16: 000000000000003f [ 0.370492] x15: 000000000000000e x14: ffffffffffffffff [ 0.375993] x13: 0000000000000000 x12: 0000000000000020 [ 0.381494] x11: 0000000000000006 x10: 0101010101010101 [ 0.386995] x9 : fffffffffffffffa x8 : 0000000000000007 [ 0.392496] x7 : ffffff80085d63f8 x6 : 0000000000000003 [ 0.397997] x5 : 0000000000000054 x4 : ffffffc0031eb800 [ 0.403499] x3 : ffffff800801b728 x2 : 0000000000000003 [ 0.409000] x1 : 0000000000000054 x0 : 0000000000000000 [ 0.414502] Process swapper/0 (pid: 1, stack limit = 0x000000002a913c1c) [ 0.421441] Call trace: [ 0.423968] mtk_hw_pin_field_get+0x28/0x118 [ 0.428387] mtk_hw_set_value+0x30/0x104 [ 0.432445] mtk_gpio_set+0x20/0x28 [ 0.436052] mtk_gpio_direction_output+0x18/0x30 [ 0.440833] gpiod_direction_output_raw_commit+0x7c/0xa0 [ 0.446333] gpiod_direction_output+0x104/0x114 [ 0.451022] gpiod_configure_flags+0xbc/0xfc [ 0.455441] gpiod_hog+0x8c/0x140 [ 0.458869] of_gpiochip_add+0x27c/0x2d4 [ 0.462928] gpiochip_add_data_with_key+0x338/0x5f0 [ 0.467976] mtk_pinctrl_probe+0x388/0x400 [ 0.472217] platform_drv_probe+0x58/0xa4 [ 0.476365] driver_probe_device+0x204/0x44c [ 0.480783] __device_attach_driver+0xac/0x108 [ 0.485384] bus_for_each_drv+0x7c/0xac [ 0.489352] __device_attach+0xa0/0x144 [ 0.493320] device_initial_probe+0x10/0x18 [ 0.497647] bus_probe_device+0x2c/0x8c [ 0.501616] device_add+0x2f8/0x540 [ 0.505226] of_device_add+0x3c/0x44 [ 0.508925] of_platform_device_create_pdata+0x80/0xb8 [ 0.514245] of_platform_bus_create+0x290/0x3e8 [ 0.518933] of_platform_populate+0x78/0x100 [ 0.523352] of_platform_default_populate+0x24/0x2c [ 0.528403] of_platform_default_populate_init+0x94/0xa4 [ 0.533903] do_one_initcall+0x98/0x130 [ 0.537874] kernel_init_freeable+0x13c/0x1d4 [ 0.542385] kernel_init+0x10/0xf8 [ 0.545903] ret_from_fork+0x10/0x18 [ 0.549603] Code: 900020a1 f9400800 911dcc21 1400001f (f9406401) [ 0.555916] ---[ end trace de8c34787fdad3b3 ]--- [ 0.560722] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.560722] [ 0.570188] SMP: stopping secondary CPUs [ 0.574253] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.574253] Cc: stable@vger.kernel.org Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang Signed-off-by: Linus Walleij --- drivers/pinctrl/mediatek/pinctrl-mt7622.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7622.c b/drivers/pinctrl/mediatek/pinctrl-mt7622.c index 055074bba246..4c4740ffeb9c 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt7622.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c @@ -1424,7 +1424,7 @@ static struct pinctrl_desc mtk_desc = { static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio) { - struct mtk_pinctrl *hw = dev_get_drvdata(chip->parent); + struct mtk_pinctrl *hw = gpiochip_get_data(chip); int value, err; err = mtk_hw_get_value(hw, gpio, PINCTRL_PIN_REG_DI, &value); @@ -1436,7 +1436,7 @@ static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio) static void mtk_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value) { - struct mtk_pinctrl *hw = dev_get_drvdata(chip->parent); + struct mtk_pinctrl *hw = gpiochip_get_data(chip); mtk_hw_set_value(hw, gpio, PINCTRL_PIN_REG_DO, !!value); } -- cgit v1.2.3 From 0084a786ca8c84b443f67c4a697b4f2552761650 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Wed, 27 Jun 2018 13:49:02 +0200 Subject: pinctrl: ingenic: Fix inverted direction for < JZ4770 The .gpio_set_direction() callback was setting inverted direction for SoCs older than the JZ4770, this restores the correct behaviour. Signed-off-by: Paul Cercueil Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-ingenic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c index a1d7156d0a43..6a1b6058b991 100644 --- a/drivers/pinctrl/pinctrl-ingenic.c +++ b/drivers/pinctrl/pinctrl-ingenic.c @@ -536,7 +536,7 @@ static int ingenic_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev, ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, input); } else { ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, false); - ingenic_config_pin(jzpc, pin, JZ4740_GPIO_DIR, input); + ingenic_config_pin(jzpc, pin, JZ4740_GPIO_DIR, !input); ingenic_config_pin(jzpc, pin, JZ4740_GPIO_FUNC, false); } -- cgit v1.2.3 From 550b6f7e8cf93fc2753aa01e655ed5471012ab5a Mon Sep 17 00:00:00 2001 From: Niklas Söderlund Date: Tue, 3 Jul 2018 17:18:42 +0200 Subject: pinctrl: sh-pfc: r8a77970: remove SH_PFC_PIN_CFG_DRIVE_STRENGTH flag MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The datasheet does not document any registers to control drive strength, and no drive strength registers are for this reason described for this SoC. The flags indicating that drive strength can be controlled are however set for some pins in the driver. This leads to a NULL pointer dereference when the sh-pfc core tries to access the struct describing the drive strength registers, for example when reading the sysfs file pinconf-pins. Fix this by removing the SH_PFC_PIN_CFG_DRIVE_STRENGTH from all pins. Fixes: b92ac66a1819602b ("pinctrl: sh-pfc: Add R8A77970 PFC support") Signed-off-by: Niklas Söderlund Reviewed-by: Simon Horman Reviewed-by: Sergei Shtylyov Reviewed-by: Geert Uytterhoeven Signed-off-by: Linus Walleij --- drivers/pinctrl/sh-pfc/pfc-r8a77970.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77970.c b/drivers/pinctrl/sh-pfc/pfc-r8a77970.c index b02caf316711..eeb58b3bbc9a 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a77970.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a77970.c @@ -21,15 +21,13 @@ #include "core.h" #include "sh_pfc.h" -#define CFG_FLAGS SH_PFC_PIN_CFG_DRIVE_STRENGTH - #define CPU_ALL_PORT(fn, sfx) \ - PORT_GP_CFG_22(0, fn, sfx, CFG_FLAGS | SH_PFC_PIN_CFG_IO_VOLTAGE), \ - PORT_GP_CFG_28(1, fn, sfx, CFG_FLAGS), \ - PORT_GP_CFG_17(2, fn, sfx, CFG_FLAGS | SH_PFC_PIN_CFG_IO_VOLTAGE), \ - PORT_GP_CFG_17(3, fn, sfx, CFG_FLAGS | SH_PFC_PIN_CFG_IO_VOLTAGE), \ - PORT_GP_CFG_6(4, fn, sfx, CFG_FLAGS), \ - PORT_GP_CFG_15(5, fn, sfx, CFG_FLAGS) + PORT_GP_CFG_22(0, fn, sfx, SH_PFC_PIN_CFG_IO_VOLTAGE), \ + PORT_GP_28(1, fn, sfx), \ + PORT_GP_CFG_17(2, fn, sfx, SH_PFC_PIN_CFG_IO_VOLTAGE), \ + PORT_GP_CFG_17(3, fn, sfx, SH_PFC_PIN_CFG_IO_VOLTAGE), \ + PORT_GP_6(4, fn, sfx), \ + PORT_GP_15(5, fn, sfx) /* * F_() : just information * FM() : macro for FN_xxx / xxx_MARK -- cgit v1.2.3 From f90a21c898db58eaea14b8ad7e9af3b9e15e5f8a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 3 Jul 2018 15:04:25 +0300 Subject: pinctrl: nsp: off by ones in nsp_pinmux_enable() The > comparisons should be >= or else we read beyond the end of the pinctrl->functions[] array. Fixes: cc4fa83f66e9 ("pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC") Signed-off-by: Dan Carpenter Reviewed-by: Ray Jui Signed-off-by: Linus Walleij --- drivers/pinctrl/bcm/pinctrl-nsp-mux.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/bcm/pinctrl-nsp-mux.c b/drivers/pinctrl/bcm/pinctrl-nsp-mux.c index 35c17653c694..5cd8166fbbc8 100644 --- a/drivers/pinctrl/bcm/pinctrl-nsp-mux.c +++ b/drivers/pinctrl/bcm/pinctrl-nsp-mux.c @@ -460,8 +460,8 @@ static int nsp_pinmux_enable(struct pinctrl_dev *pctrl_dev, const struct nsp_pin_function *func; const struct nsp_pin_group *grp; - if (grp_select > pinctrl->num_groups || - func_select > pinctrl->num_functions) + if (grp_select >= pinctrl->num_groups || + func_select >= pinctrl->num_functions) return -EINVAL; func = &pinctrl->functions[func_select]; -- cgit v1.2.3 From c29e9da56bebb4c2c794e871b0dc0298bbf08142 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 11 Jul 2018 12:34:21 +0000 Subject: pinctrl: nsp: Fix potential NULL dereference platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap_nocache(e1, res->start, e2); Fixes: cc4fa83f66e9 ("pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC") Signed-off-by: Wei Yongjun Reviewed-by: Ray Jui Signed-off-by: Linus Walleij --- drivers/pinctrl/bcm/pinctrl-nsp-mux.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/pinctrl/bcm/pinctrl-nsp-mux.c b/drivers/pinctrl/bcm/pinctrl-nsp-mux.c index 5cd8166fbbc8..87618a4e90e4 100644 --- a/drivers/pinctrl/bcm/pinctrl-nsp-mux.c +++ b/drivers/pinctrl/bcm/pinctrl-nsp-mux.c @@ -577,6 +577,8 @@ static int nsp_pinmux_probe(struct platform_device *pdev) return PTR_ERR(pinctrl->base0); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) + return -EINVAL; pinctrl->base1 = devm_ioremap_nocache(&pdev->dev, res->start, resource_size(res)); if (!pinctrl->base1) { -- cgit v1.2.3 From 6d77d3b43ad84a48b502f02dc618e7c36737bdfe Mon Sep 17 00:00:00 2001 From: Simon Ser Date: Mon, 9 Jul 2018 11:17:22 -0500 Subject: objtool: Use '.strtab' if '.shstrtab' doesn't exist, to support ORC tables on Clang Clang puts its section header names in the '.strtab' section instead of '.shstrtab', which causes objtool to fail with a "can't find .shstrtab section" warning when attempting to write ORC metadata to an object file. If '.shstrtab' doesn't exist, use '.strtab' instead. Signed-off-by: Simon Ser Signed-off-by: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/d1c1c3fe55872be433da7bc5e1860538506229ba.1531153015.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar --- tools/objtool/elf.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c index 0d1acb704f64..7ec85d567598 100644 --- a/tools/objtool/elf.c +++ b/tools/objtool/elf.c @@ -519,10 +519,12 @@ struct section *elf_create_section(struct elf *elf, const char *name, sec->sh.sh_flags = SHF_ALLOC; - /* Add section name to .shstrtab */ + /* Add section name to .shstrtab (or .strtab for Clang) */ shstrtab = find_section_by_name(elf, ".shstrtab"); + if (!shstrtab) + shstrtab = find_section_by_name(elf, ".strtab"); if (!shstrtab) { - WARN("can't find .shstrtab section"); + WARN("can't find .shstrtab or .strtab section"); return NULL; } -- cgit v1.2.3 From e181ae0c5db9544de9c53239eb22bc012ce75033 Mon Sep 17 00:00:00 2001 From: Pavel Tatashin Date: Sat, 14 Jul 2018 09:15:07 -0400 Subject: mm: zero unavailable pages before memmap init We must zero struct pages for memory that is not backed by physical memory, or kernel does not have access to. Recently, there was a change which zeroed all memmap for all holes in e820. Unfortunately, it introduced a bug that is discussed here: https://www.spinics.net/lists/linux-mm/msg156764.html Linus, also saw this bug on his machine, and confirmed that reverting commit 124049decbb1 ("x86/e820: put !E820_TYPE_RAM regions into memblock.reserved") fixes the issue. The problem is that we incorrectly zero some struct pages after they were setup. The fix is to zero unavailable struct pages prior to initializing of struct pages. A more detailed fix should come later that would avoid double zeroing cases: one in __init_single_page(), the other one in zero_resv_unavail(). Fixes: 124049decbb1 ("x86/e820: put !E820_TYPE_RAM regions into memblock.reserved") Signed-off-by: Pavel Tatashin Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 1521100f1e63..5d800d61ddb7 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -6847,6 +6847,7 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn) /* Initialise every node */ mminit_verify_pageflags_layout(); setup_nr_node_ids(); + zero_resv_unavail(); for_each_online_node(nid) { pg_data_t *pgdat = NODE_DATA(nid); free_area_init_node(nid, NULL, @@ -6857,7 +6858,6 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn) node_set_state(nid, N_MEMORY); check_for_memory(pgdat, nid); } - zero_resv_unavail(); } static int __init cmdline_parse_core(char *p, unsigned long *core, @@ -7033,9 +7033,9 @@ void __init set_dma_reserve(unsigned long new_dma_reserve) void __init free_area_init(unsigned long *zones_size) { + zero_resv_unavail(); free_area_init_node(0, zones_size, __pa(PAGE_OFFSET) >> PAGE_SHIFT, NULL); - zero_resv_unavail(); } static int page_alloc_cpu_dead(unsigned int cpu) -- cgit v1.2.3 From bce73e4842390f7b7309c8e253e139db71288ac3 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Fri, 13 Jul 2018 16:58:52 -0700 Subject: mm: do not drop unused pages when userfaultd is running KVM guests on s390 can notify the host of unused pages. This can result in pte_unused callbacks to be true for KVM guest memory. If a page is unused (checked with pte_unused) we might drop this page instead of paging it. This can have side-effects on userfaultd, when the page in question was already migrated: The next access of that page will trigger a fault and a user fault instead of faulting in a new and empty zero page. As QEMU does not expect a userfault on an already migrated page this migration will fail. The most straightforward solution is to ignore the pte_unused hint if a userfault context is active for this VMA. Link: http://lkml.kernel.org/r/20180703171854.63981-1-borntraeger@de.ibm.com Signed-off-by: Christian Borntraeger Cc: Martin Schwidefsky Cc: Andrea Arcangeli Cc: Mike Rapoport Cc: Janosch Frank Cc: David Hildenbrand Cc: Cornelia Huck Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/rmap.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/mm/rmap.c b/mm/rmap.c index 6db729dc4c50..eb477809a5c0 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -64,6 +64,7 @@ #include #include #include +#include #include @@ -1481,11 +1482,16 @@ static bool try_to_unmap_one(struct page *page, struct vm_area_struct *vma, set_pte_at(mm, address, pvmw.pte, pteval); } - } else if (pte_unused(pteval)) { + } else if (pte_unused(pteval) && !userfaultfd_armed(vma)) { /* * The guest indicated that the page content is of no * interest anymore. Simply discard the pte, vmscan * will take care of the rest. + * A future reference will then fault in a new zero + * page. When userfaultfd is active, we must not drop + * this page though, as its main user (postcopy + * migration) will not expect userfaults on already + * copied pages. */ dec_mm_counter(mm, mm_counter(page)); /* We have to invalidate as we cleared the pte */ -- cgit v1.2.3 From e70cc2bd579e8a9d6d153762f0fe294d0e652ff0 Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Fri, 13 Jul 2018 16:58:56 -0700 Subject: fs/proc/task_mmu.c: fix Locked field in /proc/pid/smaps* Thomas reports: "While looking around in /proc on my v4.14.52 system I noticed that all processes got a lot of "Locked" memory in /proc/*/smaps. A lot more memory than a regular user can usually lock with mlock(). Commit 493b0e9d945f (in v4.14-rc1) seems to have changed the behavior of "Locked". Before that commit the code was like this. Notice the VM_LOCKED check. (vma->vm_flags & VM_LOCKED) ? (unsigned long)(mss.pss >> (10 + PSS_SHIFT)) : 0); After that commit Locked is now the same as Pss: (unsigned long)(mss->pss >> (10 + PSS_SHIFT))); This looks like a mistake." Indeed, the commit has added mss->pss_locked with the correct value that depends on VM_LOCKED, but forgot to actually use it. Fix it. Link: http://lkml.kernel.org/r/ebf6c7fb-fec3-6a26-544f-710ed193c154@suse.cz Fixes: 493b0e9d945f ("mm: add /proc/pid/smaps_rollup") Signed-off-by: Vlastimil Babka Reported-by: Thomas Lindroth Cc: Alexey Dobriyan Cc: Daniel Colascione Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/task_mmu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index e9679016271f..dfd73a4616ce 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -831,7 +831,8 @@ static int show_smap(struct seq_file *m, void *v, int is_pid) SEQ_PUT_DEC(" kB\nSwap: ", mss->swap); SEQ_PUT_DEC(" kB\nSwapPss: ", mss->swap_pss >> PSS_SHIFT); - SEQ_PUT_DEC(" kB\nLocked: ", mss->pss >> PSS_SHIFT); + SEQ_PUT_DEC(" kB\nLocked: ", + mss->pss_locked >> PSS_SHIFT); seq_puts(m, " kB\n"); } if (!rollup_mode) { -- cgit v1.2.3 From 02f51d45937f7bc7f4dee21e9f85b2d5eac37104 Mon Sep 17 00:00:00 2001 From: Tomas Bortoli Date: Fri, 13 Jul 2018 16:58:59 -0700 Subject: autofs: fix slab out of bounds read in getname_kernel() The autofs subsystem does not check that the "path" parameter is present for all cases where it is required when it is passed in via the "param" struct. In particular it isn't checked for the AUTOFS_DEV_IOCTL_OPENMOUNT_CMD ioctl command. To solve it, modify validate_dev_ioctl(function to check that a path has been provided for ioctl commands that require it. Link: http://lkml.kernel.org/r/153060031527.26631.18306637892746301555.stgit@pluto.themaw.net Signed-off-by: Tomas Bortoli Signed-off-by: Ian Kent Reported-by: syzbot+60c837b428dc84e83a93@syzkaller.appspotmail.com Cc: Dmitry Vyukov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/autofs/dev-ioctl.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/fs/autofs/dev-ioctl.c b/fs/autofs/dev-ioctl.c index ea4ca1445ab7..86eafda4a652 100644 --- a/fs/autofs/dev-ioctl.c +++ b/fs/autofs/dev-ioctl.c @@ -135,6 +135,15 @@ static int validate_dev_ioctl(int cmd, struct autofs_dev_ioctl *param) cmd); goto out; } + } else { + unsigned int inr = _IOC_NR(cmd); + + if (inr == AUTOFS_DEV_IOCTL_OPENMOUNT_CMD || + inr == AUTOFS_DEV_IOCTL_REQUESTER_CMD || + inr == AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD) { + err = -EINVAL; + goto out; + } } err = 0; @@ -271,7 +280,8 @@ static int autofs_dev_ioctl_openmount(struct file *fp, dev_t devid; int err, fd; - /* param->path has already been checked */ + /* param->path has been checked in validate_dev_ioctl() */ + if (!param->openmount.devid) return -EINVAL; @@ -433,10 +443,7 @@ static int autofs_dev_ioctl_requester(struct file *fp, dev_t devid; int err = -ENOENT; - if (param->size <= AUTOFS_DEV_IOCTL_SIZE) { - err = -EINVAL; - goto out; - } + /* param->path has been checked in validate_dev_ioctl() */ devid = sbi->sb->s_dev; @@ -521,10 +528,7 @@ static int autofs_dev_ioctl_ismountpoint(struct file *fp, unsigned int devid, magic; int err = -ENOENT; - if (param->size <= AUTOFS_DEV_IOCTL_SIZE) { - err = -EINVAL; - goto out; - } + /* param->path has been checked in validate_dev_ioctl() */ name = param->path; type = param->ismountpoint.in.type; -- cgit v1.2.3 From a90744bac57c3c07d0d4422af62f3e44549ade30 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Fri, 13 Jul 2018 16:59:03 -0700 Subject: mm: allow arch to supply p??_free_tlb functions The mmu_gather APIs keep track of the invalidated address range including the span covered by invalidated page table pages. Ranges covered by page tables but not ptes (and therefore no TLBs) still need to be invalidated because some architectures (x86) can cache intermediate page table entries, and invalidate those with normal TLB invalidation instructions to be almost-backward-compatible. Architectures which don't cache intermediate page table entries, or which invalidate these caches separately from TLB invalidation, do not require TLB invalidation range expanded over page tables. Allow architectures to supply their own p??_free_tlb functions, which can avoid the __tlb_adjust_range. Link: http://lkml.kernel.org/r/20180703013131.2807-1-npiggin@gmail.com Signed-off-by: Nicholas Piggin Reviewed-by: Andrew Morton Cc: "Aneesh Kumar K. V" Cc: Minchan Kim Cc: Mel Gorman Cc: Nadav Amit Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-generic/tlb.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h index faddde44de8c..3063125197ad 100644 --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -265,33 +265,41 @@ static inline void tlb_remove_check_page_size_change(struct mmu_gather *tlb, * For now w.r.t page table cache, mark the range_size as PAGE_SIZE */ +#ifndef pte_free_tlb #define pte_free_tlb(tlb, ptep, address) \ do { \ __tlb_adjust_range(tlb, address, PAGE_SIZE); \ __pte_free_tlb(tlb, ptep, address); \ } while (0) +#endif +#ifndef pmd_free_tlb #define pmd_free_tlb(tlb, pmdp, address) \ do { \ __tlb_adjust_range(tlb, address, PAGE_SIZE); \ __pmd_free_tlb(tlb, pmdp, address); \ } while (0) +#endif #ifndef __ARCH_HAS_4LEVEL_HACK +#ifndef pud_free_tlb #define pud_free_tlb(tlb, pudp, address) \ do { \ __tlb_adjust_range(tlb, address, PAGE_SIZE); \ __pud_free_tlb(tlb, pudp, address); \ } while (0) #endif +#endif #ifndef __ARCH_HAS_5LEVEL_HACK +#ifndef p4d_free_tlb #define p4d_free_tlb(tlb, pudp, address) \ do { \ __tlb_adjust_range(tlb, address, PAGE_SIZE); \ __p4d_free_tlb(tlb, pudp, address); \ } while (0) #endif +#endif #define tlb_migrate_finish(mm) do {} while (0) -- cgit v1.2.3 From c290fba8c4ce6530cd941ea14db5a4ac2f77183f Mon Sep 17 00:00:00 2001 From: piaojun Date: Fri, 13 Jul 2018 16:59:06 -0700 Subject: net/9p/client.c: put refcount of trans_mod in error case in parse_opts() In my testing, the second mount will fail after umounting successfully. The reason is that we put refcount of trans_mod in the correct case rather than the error case in parse_opts() at last. That will cause the refcount decrease to -1, and when we try to get trans_mod again in try_module_get(), we could only increase refcount to 0 which will cause failure as follows: parse_opts v9fs_get_trans_by_name try_module_get : return NULL to caller which cause error So we should put refcount of trans_mod in error case. Link: http://lkml.kernel.org/r/5B3F39A0.2030509@huawei.com Fixes: 9421c3e64137ec ("net/9p/client.c: fix potential refcnt problem of trans module") Signed-off-by: Jun Piao Reviewed-by: Yiwen Jiang Reviewed-by: Greg Kurz Reviewed-by: Dominique Martinet Tested-by: Dominique Martinet Cc: Eric Van Hensbergen Cc: Ron Minnich Cc: Latchesar Ionkov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- net/9p/client.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/9p/client.c b/net/9p/client.c index 18c5271910dc..5c1343195292 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -225,7 +225,8 @@ static int parse_opts(char *opts, struct p9_client *clnt) } free_and_return: - v9fs_put_trans(clnt->trans_mod); + if (ret) + v9fs_put_trans(clnt->trans_mod); kfree(tmp_options); return ret; } -- cgit v1.2.3 From fa8cbda88db12e632a8987c94b66f5caf25bcec4 Mon Sep 17 00:00:00 2001 From: Philipp Rudo Date: Fri, 13 Jul 2018 16:59:09 -0700 Subject: x86/purgatory: add missing FORCE to Makefile target - Build the kernel without the fix - Add some flag to the purgatories KBUILD_CFLAGS,I used -fno-asynchronous-unwind-tables - Re-build the kernel When you look at makes output you see that sha256.o is not re-build in the last step. Also readelf -S still shows the .eh_frame section for sha256.o. With the fix sha256.o is rebuilt in the last step. Without FORCE make does not detect changes only made to the command line options. So object files might not be re-built even when they should be. Fix this by adding FORCE where it is missing. Link: http://lkml.kernel.org/r/20180704110044.29279-2-prudo@linux.ibm.com Fixes: df6f2801f511 ("kernel/kexec_file.c: move purgatories sha256 to common code") Signed-off-by: Philipp Rudo Acked-by: Dave Young Cc: Ingo Molnar Cc: Thomas Gleixner Cc: [4.17+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/purgatory/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile index 2e9ee023e6bc..81a8e33115ad 100644 --- a/arch/x86/purgatory/Makefile +++ b/arch/x86/purgatory/Makefile @@ -6,7 +6,7 @@ purgatory-y := purgatory.o stack.o setup-x86_$(BITS).o sha256.o entry64.o string targets += $(purgatory-y) PURGATORY_OBJS = $(addprefix $(obj)/,$(purgatory-y)) -$(obj)/sha256.o: $(srctree)/lib/sha256.c +$(obj)/sha256.o: $(srctree)/lib/sha256.c FORCE $(call if_changed_rule,cc_o_c) LDFLAGS_purgatory.ro := -e purgatory_start -r --no-undefined -nostdlib -z nodefaultlib -- cgit v1.2.3 From 24962af7e1041b7e50c1bc71d8d10dc678c556b5 Mon Sep 17 00:00:00 2001 From: Oscar Salvador Date: Fri, 13 Jul 2018 16:59:13 -0700 Subject: fs, elf: make sure to page align bss in load_elf_library The current code does not make sure to page align bss before calling vm_brk(), and this can lead to a VM_BUG_ON() in __mm_populate() due to the requested lenght not being correctly aligned. Let us make sure to align it properly. Kees: only applicable to CONFIG_USELIB kernels: 32-bit and configured for libc5. Link: http://lkml.kernel.org/r/20180705145539.9627-1-osalvador@techadventures.net Signed-off-by: Oscar Salvador Reported-by: syzbot+5dcb560fe12aa5091c06@syzkaller.appspotmail.com Tested-by: Tetsuo Handa Acked-by: Kees Cook Cc: Michal Hocko Cc: Nicolas Pitre Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/binfmt_elf.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 0ac456b52bdd..816cc921cf36 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -1259,9 +1259,8 @@ static int load_elf_library(struct file *file) goto out_free_ph; } - len = ELF_PAGESTART(eppnt->p_filesz + eppnt->p_vaddr + - ELF_MIN_ALIGN - 1); - bss = eppnt->p_memsz + eppnt->p_vaddr; + len = ELF_PAGEALIGN(eppnt->p_filesz + eppnt->p_vaddr); + bss = ELF_PAGEALIGN(eppnt->p_memsz + eppnt->p_vaddr); if (bss > len) { error = vm_brk(len, bss - len); if (error) -- cgit v1.2.3 From e3d301cae0092062cbcd6b4e7ceebbab9d87e263 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Fri, 13 Jul 2018 16:59:16 -0700 Subject: mm/memblock.c: do not complain about top-down allocations for !MEMORY_HOTREMOVE Mike Rapoport is converting architectures from bootmem to nobootmem allocator. While doing so for m68k Geert has noticed that he gets a scary looking warning: WARNING: CPU: 0 PID: 0 at mm/memblock.c:230 memblock_find_in_range_node+0x11c/0x1be memblock: bottom-up allocation failed, memory hotunplug may be affected Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.18.0-rc3-atari-01343-gf2fb5f2e09a97a3c-dirty #7 Call Trace: __warn+0xa8/0xc2 kernel_pg_dir+0x0/0x1000 netdev_lower_get_next+0x2/0x22 warn_slowpath_fmt+0x2e/0x36 memblock_find_in_range_node+0x11c/0x1be memblock_find_in_range_node+0x11c/0x1be memblock_find_in_range_node+0x0/0x1be vprintk_func+0x66/0x6e memblock_virt_alloc_internal+0xd0/0x156 netdev_lower_get_next+0x2/0x22 netdev_lower_get_next+0x2/0x22 kernel_pg_dir+0x0/0x1000 memblock_virt_alloc_try_nid_nopanic+0x58/0x7a netdev_lower_get_next+0x2/0x22 kernel_pg_dir+0x0/0x1000 kernel_pg_dir+0x0/0x1000 EXPTBL+0x234/0x400 EXPTBL+0x234/0x400 alloc_node_mem_map+0x4a/0x66 netdev_lower_get_next+0x2/0x22 free_area_init_node+0xe2/0x29e EXPTBL+0x234/0x400 paging_init+0x430/0x462 kernel_pg_dir+0x0/0x1000 printk+0x0/0x1a EXPTBL+0x234/0x400 setup_arch+0x1b8/0x22c start_kernel+0x4a/0x40a _sinittext+0x344/0x9e8 The warning is basically saying that a top-down allocation can break memory hotremove because memblock allocation is not movable. But m68k doesn't even support MEMORY_HOTREMOVE so there is no point to warn about it. Make the warning conditional only to configurations that care. Link: http://lkml.kernel.org/r/20180706061750.GH32658@dhcp22.suse.cz Signed-off-by: Michal Hocko Reported-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Reviewed-by: Andrew Morton Cc: Vlastimil Babka Cc: Mike Rapoport Cc: Greg Ungerer Cc: Sam Creasey Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memblock.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/memblock.c b/mm/memblock.c index 03d48d8835ba..11e46f83e1ad 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -227,7 +227,8 @@ phys_addr_t __init_memblock memblock_find_in_range_node(phys_addr_t size, * so we use WARN_ONCE() here to see the stack trace if * fail happens. */ - WARN_ONCE(1, "memblock: bottom-up allocation failed, memory hotunplug may be affected\n"); + WARN_ONCE(IS_ENABLED(CONFIG_MEMORY_HOTREMOVE), + "memblock: bottom-up allocation failed, memory hotremove may be affected\n"); } return __memblock_find_range_top_down(start, end, size, align, nid, -- cgit v1.2.3 From bb177a732c4369bb58a1fe1df8f552b6f0f7db5f Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Fri, 13 Jul 2018 16:59:20 -0700 Subject: mm: do not bug_on on incorrect length in __mm_populate() syzbot has noticed that a specially crafted library can easily hit VM_BUG_ON in __mm_populate kernel BUG at mm/gup.c:1242! invalid opcode: 0000 [#1] SMP CPU: 2 PID: 9667 Comm: a.out Not tainted 4.18.0-rc3 #644 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 RIP: 0010:__mm_populate+0x1e2/0x1f0 Code: 55 d0 65 48 33 14 25 28 00 00 00 89 d8 75 21 48 83 c4 20 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 75 18 f1 ff 0f 0b e8 6e 18 f1 ff <0f> 0b 31 db eb c9 e8 93 06 e0 ff 0f 1f 00 55 48 89 e5 53 48 89 fb Call Trace: vm_brk_flags+0xc3/0x100 vm_brk+0x1f/0x30 load_elf_library+0x281/0x2e0 __ia32_sys_uselib+0x170/0x1e0 do_fast_syscall_32+0xca/0x420 entry_SYSENTER_compat+0x70/0x7f The reason is that the length of the new brk is not page aligned when we try to populate the it. There is no reason to bug on that though. do_brk_flags already aligns the length properly so the mapping is expanded as it should. All we need is to tell mm_populate about it. Besides that there is absolutely no reason to to bug_on in the first place. The worst thing that could happen is that the last page wouldn't get populated and that is far from putting system into an inconsistent state. Fix the issue by moving the length sanitization code from do_brk_flags up to vm_brk_flags. The only other caller of do_brk_flags is brk syscall entry and it makes sure to provide the proper length so t here is no need for sanitation and so we can use do_brk_flags without it. Also remove the bogus BUG_ONs. [osalvador@techadventures.net: fix up vm_brk_flags s@request@len@] Link: http://lkml.kernel.org/r/20180706090217.GI32658@dhcp22.suse.cz Signed-off-by: Michal Hocko Reported-by: syzbot Tested-by: Tetsuo Handa Reviewed-by: Oscar Salvador Cc: Zi Yan Cc: "Aneesh Kumar K.V" Cc: Dan Williams Cc: "Kirill A. Shutemov" Cc: Michael S. Tsirkin Cc: Al Viro Cc: "Huang, Ying" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/gup.c | 2 -- mm/mmap.c | 29 ++++++++++++----------------- 2 files changed, 12 insertions(+), 19 deletions(-) diff --git a/mm/gup.c b/mm/gup.c index b70d7ba7cc13..fc5f98069f4e 100644 --- a/mm/gup.c +++ b/mm/gup.c @@ -1238,8 +1238,6 @@ int __mm_populate(unsigned long start, unsigned long len, int ignore_errors) int locked = 0; long ret = 0; - VM_BUG_ON(start & ~PAGE_MASK); - VM_BUG_ON(len != PAGE_ALIGN(len)); end = start + len; for (nstart = start; nstart < end; nstart = nend) { diff --git a/mm/mmap.c b/mm/mmap.c index d1eb87ef4b1a..5801b5f0a634 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -186,8 +186,8 @@ static struct vm_area_struct *remove_vma(struct vm_area_struct *vma) return next; } -static int do_brk(unsigned long addr, unsigned long len, struct list_head *uf); - +static int do_brk_flags(unsigned long addr, unsigned long request, unsigned long flags, + struct list_head *uf); SYSCALL_DEFINE1(brk, unsigned long, brk) { unsigned long retval; @@ -245,7 +245,7 @@ SYSCALL_DEFINE1(brk, unsigned long, brk) goto out; /* Ok, looks good - let it rip. */ - if (do_brk(oldbrk, newbrk-oldbrk, &uf) < 0) + if (do_brk_flags(oldbrk, newbrk-oldbrk, 0, &uf) < 0) goto out; set_brk: @@ -2929,21 +2929,14 @@ static inline void verify_mm_writelocked(struct mm_struct *mm) * anonymous maps. eventually we may be able to do some * brk-specific accounting here. */ -static int do_brk_flags(unsigned long addr, unsigned long request, unsigned long flags, struct list_head *uf) +static int do_brk_flags(unsigned long addr, unsigned long len, unsigned long flags, struct list_head *uf) { struct mm_struct *mm = current->mm; struct vm_area_struct *vma, *prev; - unsigned long len; struct rb_node **rb_link, *rb_parent; pgoff_t pgoff = addr >> PAGE_SHIFT; int error; - len = PAGE_ALIGN(request); - if (len < request) - return -ENOMEM; - if (!len) - return 0; - /* Until we need other flags, refuse anything except VM_EXEC. */ if ((flags & (~VM_EXEC)) != 0) return -EINVAL; @@ -3015,18 +3008,20 @@ out: return 0; } -static int do_brk(unsigned long addr, unsigned long len, struct list_head *uf) -{ - return do_brk_flags(addr, len, 0, uf); -} - -int vm_brk_flags(unsigned long addr, unsigned long len, unsigned long flags) +int vm_brk_flags(unsigned long addr, unsigned long request, unsigned long flags) { struct mm_struct *mm = current->mm; + unsigned long len; int ret; bool populate; LIST_HEAD(uf); + len = PAGE_ALIGN(request); + if (len < request) + return -ENOMEM; + if (!len) + return 0; + if (down_write_killable(&mm->mmap_sem)) return -EINTR; -- cgit v1.2.3 From ffe075132af8b7967089c361e506d4fa747efd14 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 13 Jul 2018 16:59:23 -0700 Subject: checkpatch: fix duplicate invalid vsprintf pointer extension '%p' messages Multiline statements with invalid %p uses produce multiple warnings. Fix that. e.g.: $ cat t_block.c void foo(void) { MY_DEBUG(drv->foo, "%pk", foo->boo); } $ ./scripts/checkpatch.pl -f t_block.c WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 #1: FILE: t_block.c:1: +void foo(void) WARNING: Invalid vsprintf pointer extension '%pk' #3: FILE: t_block.c:3: + MY_DEBUG(drv->foo, + "%pk", + foo->boo); WARNING: Invalid vsprintf pointer extension '%pk' #3: FILE: t_block.c:3: + MY_DEBUG(drv->foo, + "%pk", + foo->boo); total: 0 errors, 3 warnings, 6 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. t_block.c has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Link: http://lkml.kernel.org/r/9e8341bbe4c9877d159cb512bb701043cbfbb10b.camel@perches.com Signed-off-by: Joe Perches Cc: "Tobin C. Harding" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index a9c05506e325..447857ffaf6b 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -5813,14 +5813,14 @@ sub process { defined $stat && $stat =~ /^\+(?![^\{]*\{\s*).*\b(\w+)\s*\(.*$String\s*,/s && $1 !~ /^_*volatile_*$/) { - my $specifier; - my $extension; - my $bad_specifier = ""; my $stat_real; my $lc = $stat =~ tr@\n@@; $lc = $lc + $linenr; for (my $count = $linenr; $count <= $lc; $count++) { + my $specifier; + my $extension; + my $bad_specifier = ""; my $fmt = get_quoted_string($lines[$count - 1], raw_line($count, 0)); $fmt =~ s/%%//g; -- cgit v1.2.3 From fe10e398e860955bac4d28ec031b701d358465e4 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Fri, 13 Jul 2018 16:59:27 -0700 Subject: reiserfs: fix buffer overflow with long warning messages ReiserFS prepares log messages into a 1024-byte buffer with no bounds checks. Long messages, such as the "unknown mount option" warning when userspace passes a crafted mount options string, overflow this buffer. This causes KASAN to report a global-out-of-bounds write. Fix it by truncating messages to the buffer size. Link: http://lkml.kernel.org/r/20180707203621.30922-1-ebiggers3@gmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+b890b3335a4d8c608963@syzkaller.appspotmail.com Signed-off-by: Eric Biggers Reviewed-by: Andrew Morton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/reiserfs/prints.c | 141 +++++++++++++++++++++++++++++---------------------- 1 file changed, 81 insertions(+), 60 deletions(-) diff --git a/fs/reiserfs/prints.c b/fs/reiserfs/prints.c index 7e288d97adcb..9fed1c05f1f4 100644 --- a/fs/reiserfs/prints.c +++ b/fs/reiserfs/prints.c @@ -76,83 +76,99 @@ static char *le_type(struct reiserfs_key *key) } /* %k */ -static void sprintf_le_key(char *buf, struct reiserfs_key *key) +static int scnprintf_le_key(char *buf, size_t size, struct reiserfs_key *key) { if (key) - sprintf(buf, "[%d %d %s %s]", le32_to_cpu(key->k_dir_id), - le32_to_cpu(key->k_objectid), le_offset(key), - le_type(key)); + return scnprintf(buf, size, "[%d %d %s %s]", + le32_to_cpu(key->k_dir_id), + le32_to_cpu(key->k_objectid), le_offset(key), + le_type(key)); else - sprintf(buf, "[NULL]"); + return scnprintf(buf, size, "[NULL]"); } /* %K */ -static void sprintf_cpu_key(char *buf, struct cpu_key *key) +static int scnprintf_cpu_key(char *buf, size_t size, struct cpu_key *key) { if (key) - sprintf(buf, "[%d %d %s %s]", key->on_disk_key.k_dir_id, - key->on_disk_key.k_objectid, reiserfs_cpu_offset(key), - cpu_type(key)); + return scnprintf(buf, size, "[%d %d %s %s]", + key->on_disk_key.k_dir_id, + key->on_disk_key.k_objectid, + reiserfs_cpu_offset(key), cpu_type(key)); else - sprintf(buf, "[NULL]"); + return scnprintf(buf, size, "[NULL]"); } -static void sprintf_de_head(char *buf, struct reiserfs_de_head *deh) +static int scnprintf_de_head(char *buf, size_t size, + struct reiserfs_de_head *deh) { if (deh) - sprintf(buf, - "[offset=%d dir_id=%d objectid=%d location=%d state=%04x]", - deh_offset(deh), deh_dir_id(deh), deh_objectid(deh), - deh_location(deh), deh_state(deh)); + return scnprintf(buf, size, + "[offset=%d dir_id=%d objectid=%d location=%d state=%04x]", + deh_offset(deh), deh_dir_id(deh), + deh_objectid(deh), deh_location(deh), + deh_state(deh)); else - sprintf(buf, "[NULL]"); + return scnprintf(buf, size, "[NULL]"); } -static void sprintf_item_head(char *buf, struct item_head *ih) +static int scnprintf_item_head(char *buf, size_t size, struct item_head *ih) { if (ih) { - strcpy(buf, - (ih_version(ih) == KEY_FORMAT_3_6) ? "*3.6* " : "*3.5*"); - sprintf_le_key(buf + strlen(buf), &(ih->ih_key)); - sprintf(buf + strlen(buf), ", item_len %d, item_location %d, " - "free_space(entry_count) %d", - ih_item_len(ih), ih_location(ih), ih_free_space(ih)); + char *p = buf; + char * const end = buf + size; + + p += scnprintf(p, end - p, "%s", + (ih_version(ih) == KEY_FORMAT_3_6) ? + "*3.6* " : "*3.5*"); + + p += scnprintf_le_key(p, end - p, &ih->ih_key); + + p += scnprintf(p, end - p, + ", item_len %d, item_location %d, free_space(entry_count) %d", + ih_item_len(ih), ih_location(ih), + ih_free_space(ih)); + return p - buf; } else - sprintf(buf, "[NULL]"); + return scnprintf(buf, size, "[NULL]"); } -static void sprintf_direntry(char *buf, struct reiserfs_dir_entry *de) +static int scnprintf_direntry(char *buf, size_t size, + struct reiserfs_dir_entry *de) { char name[20]; memcpy(name, de->de_name, de->de_namelen > 19 ? 19 : de->de_namelen); name[de->de_namelen > 19 ? 19 : de->de_namelen] = 0; - sprintf(buf, "\"%s\"==>[%d %d]", name, de->de_dir_id, de->de_objectid); + return scnprintf(buf, size, "\"%s\"==>[%d %d]", + name, de->de_dir_id, de->de_objectid); } -static void sprintf_block_head(char *buf, struct buffer_head *bh) +static int scnprintf_block_head(char *buf, size_t size, struct buffer_head *bh) { - sprintf(buf, "level=%d, nr_items=%d, free_space=%d rdkey ", - B_LEVEL(bh), B_NR_ITEMS(bh), B_FREE_SPACE(bh)); + return scnprintf(buf, size, + "level=%d, nr_items=%d, free_space=%d rdkey ", + B_LEVEL(bh), B_NR_ITEMS(bh), B_FREE_SPACE(bh)); } -static void sprintf_buffer_head(char *buf, struct buffer_head *bh) +static int scnprintf_buffer_head(char *buf, size_t size, struct buffer_head *bh) { - sprintf(buf, - "dev %pg, size %zd, blocknr %llu, count %d, state 0x%lx, page %p, (%s, %s, %s)", - bh->b_bdev, bh->b_size, - (unsigned long long)bh->b_blocknr, atomic_read(&(bh->b_count)), - bh->b_state, bh->b_page, - buffer_uptodate(bh) ? "UPTODATE" : "!UPTODATE", - buffer_dirty(bh) ? "DIRTY" : "CLEAN", - buffer_locked(bh) ? "LOCKED" : "UNLOCKED"); + return scnprintf(buf, size, + "dev %pg, size %zd, blocknr %llu, count %d, state 0x%lx, page %p, (%s, %s, %s)", + bh->b_bdev, bh->b_size, + (unsigned long long)bh->b_blocknr, + atomic_read(&(bh->b_count)), + bh->b_state, bh->b_page, + buffer_uptodate(bh) ? "UPTODATE" : "!UPTODATE", + buffer_dirty(bh) ? "DIRTY" : "CLEAN", + buffer_locked(bh) ? "LOCKED" : "UNLOCKED"); } -static void sprintf_disk_child(char *buf, struct disk_child *dc) +static int scnprintf_disk_child(char *buf, size_t size, struct disk_child *dc) { - sprintf(buf, "[dc_number=%d, dc_size=%u]", dc_block_number(dc), - dc_size(dc)); + return scnprintf(buf, size, "[dc_number=%d, dc_size=%u]", + dc_block_number(dc), dc_size(dc)); } static char *is_there_reiserfs_struct(char *fmt, int *what) @@ -189,55 +205,60 @@ static void prepare_error_buf(const char *fmt, va_list args) char *fmt1 = fmt_buf; char *k; char *p = error_buf; + char * const end = &error_buf[sizeof(error_buf)]; int what; spin_lock(&error_lock); - strcpy(fmt1, fmt); + if (WARN_ON(strscpy(fmt_buf, fmt, sizeof(fmt_buf)) < 0)) { + strscpy(error_buf, "format string too long", end - error_buf); + goto out_unlock; + } while ((k = is_there_reiserfs_struct(fmt1, &what)) != NULL) { *k = 0; - p += vsprintf(p, fmt1, args); + p += vscnprintf(p, end - p, fmt1, args); switch (what) { case 'k': - sprintf_le_key(p, va_arg(args, struct reiserfs_key *)); + p += scnprintf_le_key(p, end - p, + va_arg(args, struct reiserfs_key *)); break; case 'K': - sprintf_cpu_key(p, va_arg(args, struct cpu_key *)); + p += scnprintf_cpu_key(p, end - p, + va_arg(args, struct cpu_key *)); break; case 'h': - sprintf_item_head(p, va_arg(args, struct item_head *)); + p += scnprintf_item_head(p, end - p, + va_arg(args, struct item_head *)); break; case 't': - sprintf_direntry(p, - va_arg(args, - struct reiserfs_dir_entry *)); + p += scnprintf_direntry(p, end - p, + va_arg(args, struct reiserfs_dir_entry *)); break; case 'y': - sprintf_disk_child(p, - va_arg(args, struct disk_child *)); + p += scnprintf_disk_child(p, end - p, + va_arg(args, struct disk_child *)); break; case 'z': - sprintf_block_head(p, - va_arg(args, struct buffer_head *)); + p += scnprintf_block_head(p, end - p, + va_arg(args, struct buffer_head *)); break; case 'b': - sprintf_buffer_head(p, - va_arg(args, struct buffer_head *)); + p += scnprintf_buffer_head(p, end - p, + va_arg(args, struct buffer_head *)); break; case 'a': - sprintf_de_head(p, - va_arg(args, - struct reiserfs_de_head *)); + p += scnprintf_de_head(p, end - p, + va_arg(args, struct reiserfs_de_head *)); break; } - p += strlen(p); fmt1 = k + 2; } - vsprintf(p, fmt1, args); + p += vscnprintf(p, end - p, fmt1, args); +out_unlock: spin_unlock(&error_lock); } -- cgit v1.2.3 From 2c991e408df6a407476dbc453d725e1e975479e7 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Sat, 14 Jul 2018 12:58:07 -0700 Subject: x86/events/intel/ds: Fix bts_interrupt_threshold alignment Markus reported that BTS is sporadically missing the tail of the trace in the perf_event data buffer: [decode error (1): instruction overflow] shown in GDB; and bisected it to the conversion of debug_store to PTI. A little "optimization" crept into alloc_bts_buffer(), which mistakenly placed bts_interrupt_threshold away from the 24-byte record boundary. Intel SDM Vol 3B 17.4.9 says "This address must point to an offset from the BTS buffer base that is a multiple of the BTS record size." Revert "max" from a byte count to a record count, to calculate the bts_interrupt_threshold correctly: which turns out to fix problem seen. Fixes: c1961a4631da ("x86/events/intel/ds: Map debug buffers in cpu_entry_area") Reported-and-tested-by: Markus T Metzger Signed-off-by: Hugh Dickins Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Andi Kleen Cc: Dave Hansen Cc: Stephane Eranian Cc: stable@vger.kernel.org # v4.14+ Link: https://lkml.kernel.org/r/alpine.LSU.2.11.1807141248290.1614@eggly.anvils --- arch/x86/events/intel/ds.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c index 8a10a045b57b..8cf03f101938 100644 --- a/arch/x86/events/intel/ds.c +++ b/arch/x86/events/intel/ds.c @@ -408,9 +408,11 @@ static int alloc_bts_buffer(int cpu) ds->bts_buffer_base = (unsigned long) cea; ds_update_cea(cea, buffer, BTS_BUFFER_SIZE, PAGE_KERNEL); ds->bts_index = ds->bts_buffer_base; - max = BTS_RECORD_SIZE * (BTS_BUFFER_SIZE / BTS_RECORD_SIZE); - ds->bts_absolute_maximum = ds->bts_buffer_base + max; - ds->bts_interrupt_threshold = ds->bts_absolute_maximum - (max / 16); + max = BTS_BUFFER_SIZE / BTS_RECORD_SIZE; + ds->bts_absolute_maximum = ds->bts_buffer_base + + max * BTS_RECORD_SIZE; + ds->bts_interrupt_threshold = ds->bts_absolute_maximum - + (max / 16) * BTS_RECORD_SIZE; return 0; } -- cgit v1.2.3 From 9fb8d5dc4b649dd190e1af4ead670753e71bf907 Mon Sep 17 00:00:00 2001 From: "Isaac J. Manjarres" Date: Tue, 3 Jul 2018 15:02:14 -0700 Subject: stop_machine: Disable preemption when waking two stopper threads When cpu_stop_queue_two_works() begins to wake the stopper threads, it does so without preemption disabled, which leads to the following race condition: The source CPU calls cpu_stop_queue_two_works(), with cpu1 as the source CPU, and cpu2 as the destination CPU. When adding the stopper threads to the wake queue used in this function, the source CPU stopper thread is added first, and the destination CPU stopper thread is added last. When wake_up_q() is invoked to wake the stopper threads, the threads are woken up in the order that they are queued in, so the source CPU's stopper thread is woken up first, and it preempts the thread running on the source CPU. The stopper thread will then execute on the source CPU, disable preemption, and begin executing multi_cpu_stop(), and wait for an ack from the destination CPU's stopper thread, with preemption still disabled. Since the worker thread that woke up the stopper thread on the source CPU is affine to the source CPU, and preemption is disabled on the source CPU, that thread will never run to dequeue the destination CPU's stopper thread from the wake queue, and thus, the destination CPU's stopper thread will never run, causing the source CPU's stopper thread to wait forever, and stall. Disable preemption when waking the stopper threads in cpu_stop_queue_two_works(). Fixes: 0b26351b910f ("stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock") Co-Developed-by: Prasad Sodagudi Signed-off-by: Prasad Sodagudi Co-Developed-by: Pavankumar Kondeti Signed-off-by: Pavankumar Kondeti Signed-off-by: Isaac J. Manjarres Signed-off-by: Thomas Gleixner Cc: peterz@infradead.org Cc: matt@codeblueprint.co.uk Cc: bigeasy@linutronix.de Cc: gregkh@linuxfoundation.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1530655334-4601-1-git-send-email-isaacm@codeaurora.org --- kernel/stop_machine.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c index f89014a2c238..1ff523dae6e2 100644 --- a/kernel/stop_machine.c +++ b/kernel/stop_machine.c @@ -270,7 +270,11 @@ unlock: goto retry; } - wake_up_q(&wakeq); + if (!err) { + preempt_disable(); + wake_up_q(&wakeq); + preempt_enable(); + } return err; } -- cgit v1.2.3 From cd28325249a1ca0d771557ce823e0308ad629f98 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Mon, 25 Jun 2018 14:04:37 +0200 Subject: KVM: VMX: support MSR_IA32_ARCH_CAPABILITIES as a feature MSR This lets userspace read the MSR_IA32_ARCH_CAPABILITIES and check that all requested features are available on the host. Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 71e7cda6d014..b91c1e1ff459 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1092,6 +1092,7 @@ static u32 msr_based_features[] = { MSR_F10H_DECFG, MSR_IA32_UCODE_REV, + MSR_IA32_ARCH_CAPABILITIES, }; static unsigned int num_msr_based_features; @@ -1100,7 +1101,8 @@ static int kvm_get_msr_feature(struct kvm_msr_entry *msr) { switch (msr->index) { case MSR_IA32_UCODE_REV: - rdmsrl(msr->index, msr->data); + case MSR_IA32_ARCH_CAPABILITIES: + rdmsrl_safe(msr->index, &msr->data); break; default: if (kvm_x86_ops->get_msr_feature(msr)) -- cgit v1.2.3 From b062b794c7831a70bda4dfac202c1a9418e06ac0 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Wed, 11 Jul 2018 19:37:18 +0200 Subject: x86/kvm/vmx: don't read current->thread.{fs,gs}base of legacy tasks When we switched from doing rdmsr() to reading FS/GS base values from current->thread we completely forgot about legacy 32-bit userspaces which we still support in KVM (why?). task->thread.{fsbase,gsbase} are only synced for 64-bit processes, calling save_fsgs_for_kvm() and using its result from current is illegal for legacy processes. There's no ARCH_SET_FS/GS prctls for legacy applications. Base MSRs are, however, not always equal to zero. Intel's manual says (3.4.4 Segment Loading Instructions in IA-32e Mode): "In order to set up compatibility mode for an application, segment-load instructions (MOV to Sreg, POP Sreg) work normally in 64-bit mode. An entry is read from the system descriptor table (GDT or LDT) and is loaded in the hidden portion of the segment register. ... The hidden descriptor register fields for FS.base and GS.base are physically mapped to MSRs in order to load all address bits supported by a 64-bit implementation. " The issue was found by strace test suite where 32-bit ioctl_kvm_run test started segfaulting. Reported-by: Dmitry V. Levin Bisected-by: Masatake YAMATO Fixes: 42b933b59721 ("x86/kvm/vmx: read MSR_{FS,KERNEL_GS}_BASE from current->thread") Cc: stable@vger.kernel.org Signed-off-by: Vitaly Kuznetsov Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 40aa29204baf..12ed6a8f6287 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -2365,6 +2365,7 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu) struct vcpu_vmx *vmx = to_vmx(vcpu); #ifdef CONFIG_X86_64 int cpu = raw_smp_processor_id(); + unsigned long fs_base, kernel_gs_base; #endif int i; @@ -2380,12 +2381,20 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu) vmx->host_state.gs_ldt_reload_needed = vmx->host_state.ldt_sel; #ifdef CONFIG_X86_64 - save_fsgs_for_kvm(); - vmx->host_state.fs_sel = current->thread.fsindex; - vmx->host_state.gs_sel = current->thread.gsindex; -#else - savesegment(fs, vmx->host_state.fs_sel); - savesegment(gs, vmx->host_state.gs_sel); + if (likely(is_64bit_mm(current->mm))) { + save_fsgs_for_kvm(); + vmx->host_state.fs_sel = current->thread.fsindex; + vmx->host_state.gs_sel = current->thread.gsindex; + fs_base = current->thread.fsbase; + kernel_gs_base = current->thread.gsbase; + } else { +#endif + savesegment(fs, vmx->host_state.fs_sel); + savesegment(gs, vmx->host_state.gs_sel); +#ifdef CONFIG_X86_64 + fs_base = read_msr(MSR_FS_BASE); + kernel_gs_base = read_msr(MSR_KERNEL_GS_BASE); + } #endif if (!(vmx->host_state.fs_sel & 7)) { vmcs_write16(HOST_FS_SELECTOR, vmx->host_state.fs_sel); @@ -2405,10 +2414,10 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu) savesegment(ds, vmx->host_state.ds_sel); savesegment(es, vmx->host_state.es_sel); - vmcs_writel(HOST_FS_BASE, current->thread.fsbase); + vmcs_writel(HOST_FS_BASE, fs_base); vmcs_writel(HOST_GS_BASE, cpu_kernelmode_gs_base(cpu)); - vmx->msr_host_kernel_gs_base = current->thread.gsbase; + vmx->msr_host_kernel_gs_base = kernel_gs_base; if (is_long_mode(&vmx->vcpu)) wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base); #else -- cgit v1.2.3 From 0b88abdc3f964c28ec03bc69eb17cb6b3b034564 Mon Sep 17 00:00:00 2001 From: Jim Mattson Date: Wed, 30 May 2018 16:00:02 -0700 Subject: kvm: nVMX: Restore exit qual for VM-entry failure due to MSR loading This exit qualification was inadvertently dropped when the two VM-entry failure blocks were coalesced. Fixes: e79f245ddec1 ("X86/KVM: Properly update 'tsc_offset' to represent the running guest") Signed-off-by: Jim Mattson Reviewed-by: Krish Sadhukhan Reviewed-by: David Hildenbrand Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 12ed6a8f6287..ba981459d706 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -11431,7 +11431,6 @@ static int enter_vmx_non_root_mode(struct kvm_vcpu *vcpu, bool from_vmentry) { struct vcpu_vmx *vmx = to_vmx(vcpu); struct vmcs12 *vmcs12 = get_vmcs12(vcpu); - u32 msr_entry_idx; u32 exit_qual; int r; @@ -11453,10 +11452,10 @@ static int enter_vmx_non_root_mode(struct kvm_vcpu *vcpu, bool from_vmentry) nested_get_vmcs12_pages(vcpu, vmcs12); r = EXIT_REASON_MSR_LOAD_FAIL; - msr_entry_idx = nested_vmx_load_msr(vcpu, - vmcs12->vm_entry_msr_load_addr, - vmcs12->vm_entry_msr_load_count); - if (msr_entry_idx) + exit_qual = nested_vmx_load_msr(vcpu, + vmcs12->vm_entry_msr_load_addr, + vmcs12->vm_entry_msr_load_count); + if (exit_qual) goto fail; /* -- cgit v1.2.3 From d30f370d3a4998c13ed3e5c8ef607d05be0a987a Mon Sep 17 00:00:00 2001 From: Janakarajan Natarajan Date: Wed, 27 Jun 2018 11:30:53 -0500 Subject: x86/kvm/Kconfig: Ensure CRYPTO_DEV_CCP_DD state at minimum matches KVM_AMD Prevent a config where KVM_AMD=y and CRYPTO_DEV_CCP_DD=m thereby ensuring that AMD Secure Processor device driver will be built-in when KVM_AMD is also built-in. v1->v2: * Removed usage of 'imply' Kconfig option. * Change patch commit message. Fixes: 505c9e94d832 ("KVM: x86: prefer "depends on" to "select" for SEV") Cc: # 4.16.x Signed-off-by: Janakarajan Natarajan Reviewed-by: Brijesh Singh Signed-off-by: Paolo Bonzini --- arch/x86/kvm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig index 92fd433c50b9..1bbec387d289 100644 --- a/arch/x86/kvm/Kconfig +++ b/arch/x86/kvm/Kconfig @@ -85,7 +85,7 @@ config KVM_AMD_SEV def_bool y bool "AMD Secure Encrypted Virtualization (SEV) support" depends on KVM_AMD && X86_64 - depends on CRYPTO_DEV_CCP && CRYPTO_DEV_CCP_DD && CRYPTO_DEV_SP_PSP + depends on CRYPTO_DEV_SP_PSP && !(KVM_AMD=y && CRYPTO_DEV_CCP_DD=m) ---help--- Provides support for launching Encrypted VMs on AMD processors. -- cgit v1.2.3 From 94ffba484663ab3fc695ce2a34871e8c3db499f7 Mon Sep 17 00:00:00 2001 From: Radim Krčmář Date: Sun, 15 Jul 2018 17:43:11 +0200 Subject: x86/kvmclock: set pvti_cpu0_va after enabling kvmclock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit pvti_cpu0_va is the address of shared kvmclock data structure. pvti_cpu0_va is currently kept unset (1) on 32 bit systems, (2) when kvmclock vsyscall is disabled, and (3) if kvmclock is not stable. This poses a problem, because kvm_ptp needs pvti_cpu0_va, but (1) can work on 32 bit, (2) has little relation to the vsyscall, and (3) does not need stable kvmclock (although kvmclock won't be used for system clock if it's not stable, so kvm_ptp is pointless in that case). Expose pvti_cpu0_va whenever kvmclock is enabled to allow all users to work with it. This fixes a regression found on Gentoo: https://bugs.gentoo.org/658544. Fixes: 9f08890ab906 ("x86/pvclock: add setter for pvclock_pvti_cpu0_va") Cc: stable@vger.kernel.org Reported-by: Andreas Steinmetz Signed-off-by: Radim Krčmář Signed-off-by: Paolo Bonzini --- arch/x86/kernel/kvmclock.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index 8b26c9e01cc4..d79a18b4cf9d 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -319,6 +319,8 @@ void __init kvmclock_init(void) printk(KERN_INFO "kvm-clock: Using msrs %x and %x", msr_kvm_system_time, msr_kvm_wall_clock); + pvclock_set_pvti_cpu0_va(hv_clock); + if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE_STABLE_BIT)) pvclock_set_flags(PVCLOCK_TSC_STABLE_BIT); @@ -366,14 +368,11 @@ int __init kvm_setup_vsyscall_timeinfo(void) vcpu_time = &hv_clock[cpu].pvti; flags = pvclock_read_flags(vcpu_time); - if (!(flags & PVCLOCK_TSC_STABLE_BIT)) { - put_cpu(); - return 1; - } - - pvclock_set_pvti_cpu0_va(hv_clock); put_cpu(); + if (!(flags & PVCLOCK_TSC_STABLE_BIT)) + return 1; + kvm_clock.archdata.vclock_mode = VCLOCK_PVCLOCK; #endif return 0; -- cgit v1.2.3 From 9d3cce1e8b8561fed5f383d22a4d6949db4eadbe Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 15 Jul 2018 12:49:31 -0700 Subject: Linux 4.18-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 2d80fbbe51a8..a89d8a0d3ee1 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 4 PATCHLEVEL = 18 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Merciless Moray # *DOCUMENTATION* -- cgit v1.2.3 From e117cb52bdb4d376b711bee34af6434c9e314b3b Mon Sep 17 00:00:00 2001 From: Juri Lelli Date: Wed, 11 Jul 2018 09:29:48 +0200 Subject: sched/deadline: Fix switched_from_dl() warning Mark noticed that syzkaller is able to reliably trigger the following warning: dl_rq->running_bw > dl_rq->this_bw WARNING: CPU: 1 PID: 153 at kernel/sched/deadline.c:124 switched_from_dl+0x454/0x608 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 153 Comm: syz-executor253 Not tainted 4.18.0-rc3+ #29 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x458 show_stack+0x20/0x30 dump_stack+0x180/0x250 panic+0x2dc/0x4ec __warn_printk+0x0/0x150 report_bug+0x228/0x2d8 bug_handler+0xa0/0x1a0 brk_handler+0x2f0/0x568 do_debug_exception+0x1bc/0x5d0 el1_dbg+0x18/0x78 switched_from_dl+0x454/0x608 __sched_setscheduler+0x8cc/0x2018 sys_sched_setattr+0x340/0x758 el0_svc_naked+0x30/0x34 syzkaller reproducer runs a bunch of threads that constantly switch between DEADLINE and NORMAL classes while interacting through futexes. The splat above is caused by the fact that if a DEADLINE task is setattr back to NORMAL while in non_contending state (blocked on a futex - inactive timer armed), its contribution to running_bw is not removed before sub_rq_bw() gets called (!task_on_rq_queued() branch) and the latter sees running_bw > this_bw. Fix it by removing a task contribution from running_bw if the task is not queued and in non_contending state while switched to a different class. Reported-by: Mark Rutland Signed-off-by: Juri Lelli Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Daniel Bristot de Oliveira Reviewed-by: Luca Abeni Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: claudio@evidence.eu.com Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/20180711072948.27061-1-juri.lelli@redhat.com Signed-off-by: Ingo Molnar --- kernel/sched/deadline.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c index fbfc3f1d368a..10c7b51c0d1f 100644 --- a/kernel/sched/deadline.c +++ b/kernel/sched/deadline.c @@ -2290,8 +2290,17 @@ static void switched_from_dl(struct rq *rq, struct task_struct *p) if (task_on_rq_queued(p) && p->dl.dl_runtime) task_non_contending(p); - if (!task_on_rq_queued(p)) + if (!task_on_rq_queued(p)) { + /* + * Inactive timer is armed. However, p is leaving DEADLINE and + * might migrate away from this rq while continuing to run on + * some other class. We need to remove its contribution from + * this rq running_bw now, or sub_rq_bw (below) will complain. + */ + if (p->dl.dl_non_contending) + sub_running_bw(&p->dl, &rq->dl); sub_rq_bw(&p->dl, &rq->dl); + } /* * We cannot use inactive_task_timer() to invoke sub_running_bw() -- cgit v1.2.3 From bf3eeb9b5f2a1a05b3a68c6d82112babd58d6a39 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 8 Jul 2018 13:46:02 -0700 Subject: lib/iov_iter: Document _copy_to_iter_mcsafe() Add some theory of operation documentation to _copy_to_iter_mcsafe(). Reported-by: Al Viro Signed-off-by: Dan Williams Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Tony Luck Link: http://lkml.kernel.org/r/153108276256.37979.1689794213845539316.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar --- lib/iov_iter.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/lib/iov_iter.c b/lib/iov_iter.c index 7e43cd54c84c..94fa361be7bb 100644 --- a/lib/iov_iter.c +++ b/lib/iov_iter.c @@ -596,6 +596,32 @@ static unsigned long memcpy_mcsafe_to_page(struct page *page, size_t offset, return ret; } +/** + * _copy_to_iter_mcsafe - copy to user with source-read error exception handling + * @addr: source kernel address + * @bytes: total transfer length + * @iter: destination iterator + * + * The pmem driver arranges for filesystem-dax to use this facility via + * dax_copy_to_iter() for protecting read/write to persistent memory. + * Unless / until an architecture can guarantee identical performance + * between _copy_to_iter_mcsafe() and _copy_to_iter() it would be a + * performance regression to switch more users to the mcsafe version. + * + * Otherwise, the main differences between this and typical _copy_to_iter(). + * + * * Typical tail/residue handling after a fault retries the copy + * byte-by-byte until the fault happens again. Re-triggering machine + * checks is potentially fatal so the implementation uses source + * alignment and poison alignment assumptions to avoid re-triggering + * hardware exceptions. + * + * * ITER_KVEC, ITER_PIPE, and ITER_BVEC can return short copies. + * Compare to copy_to_iter() where only ITER_IOVEC attempts might return + * a short copy. + * + * See MCSAFE_TEST for self-test. + */ size_t _copy_to_iter_mcsafe(const void *addr, size_t bytes, struct iov_iter *i) { const char *from = addr; -- cgit v1.2.3 From abd08d7d245397bcbded8c6c29ff79a36b3875b0 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 8 Jul 2018 13:46:07 -0700 Subject: lib/iov_iter: Document _copy_to_iter_flushcache() Add some theory of operation documentation to _copy_to_iter_flushcache(). Reported-by: Al Viro Signed-off-by: Dan Williams Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Tony Luck Link: http://lkml.kernel.org/r/153108276767.37979.9462477994086841699.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar --- lib/iov_iter.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/lib/iov_iter.c b/lib/iov_iter.c index 94fa361be7bb..09fb73ad9d54 100644 --- a/lib/iov_iter.c +++ b/lib/iov_iter.c @@ -727,6 +727,20 @@ size_t _copy_from_iter_nocache(void *addr, size_t bytes, struct iov_iter *i) EXPORT_SYMBOL(_copy_from_iter_nocache); #ifdef CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE +/** + * _copy_from_iter_flushcache - write destination through cpu cache + * @addr: destination kernel address + * @bytes: total transfer length + * @iter: source iterator + * + * The pmem driver arranges for filesystem-dax to use this facility via + * dax_copy_from_iter() for ensuring that writes to persistent memory + * are flushed through the CPU cache. It is differentiated from + * _copy_from_iter_nocache() in that guarantees all data is flushed for + * all iterator types. The _copy_from_iter_nocache() only attempts to + * bypass the cache for the ITER_IOVEC case, and on some archs may use + * instructions that strand dirty-data in the cache. + */ size_t _copy_from_iter_flushcache(void *addr, size_t bytes, struct iov_iter *i) { char *to = addr; -- cgit v1.2.3 From ca146f6f091e47b3fd18d6a7e76ec0297d202e0f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 8 Jul 2018 13:46:12 -0700 Subject: lib/iov_iter: Fix pipe handling in _copy_to_iter_mcsafe() By mistake the ITER_PIPE early-exit / warning from copy_from_iter() was cargo-culted in _copy_to_iter_mcsafe() rather than a machine-check-safe version of copy_to_iter_pipe(). Implement copy_pipe_to_iter_mcsafe() being careful to return the indication of short copies due to a CPU exception. Without this regression-fix all splice reads to dax-mode files fail. Reported-by: Ross Zwisler Tested-by: Ross Zwisler Signed-off-by: Dan Williams Acked-by: Al Viro Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Tony Luck Fixes: 8780356ef630 ("x86/asm/memcpy_mcsafe: Define copy_to_iter_mcsafe()") Link: http://lkml.kernel.org/r/153108277278.37979.3327916996902264102.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar --- lib/iov_iter.c | 37 +++++++++++++++++++++++++++++++++---- 1 file changed, 33 insertions(+), 4 deletions(-) diff --git a/lib/iov_iter.c b/lib/iov_iter.c index 09fb73ad9d54..8be175df3075 100644 --- a/lib/iov_iter.c +++ b/lib/iov_iter.c @@ -596,6 +596,37 @@ static unsigned long memcpy_mcsafe_to_page(struct page *page, size_t offset, return ret; } +static size_t copy_pipe_to_iter_mcsafe(const void *addr, size_t bytes, + struct iov_iter *i) +{ + struct pipe_inode_info *pipe = i->pipe; + size_t n, off, xfer = 0; + int idx; + + if (!sanity(i)) + return 0; + + bytes = n = push_pipe(i, bytes, &idx, &off); + if (unlikely(!n)) + return 0; + for ( ; n; idx = next_idx(idx, pipe), off = 0) { + size_t chunk = min_t(size_t, n, PAGE_SIZE - off); + unsigned long rem; + + rem = memcpy_mcsafe_to_page(pipe->bufs[idx].page, off, addr, + chunk); + i->idx = idx; + i->iov_offset = off + chunk - rem; + xfer += chunk - rem; + if (rem) + break; + n -= chunk; + addr += chunk; + } + i->count -= xfer; + return xfer; +} + /** * _copy_to_iter_mcsafe - copy to user with source-read error exception handling * @addr: source kernel address @@ -627,10 +658,8 @@ size_t _copy_to_iter_mcsafe(const void *addr, size_t bytes, struct iov_iter *i) const char *from = addr; unsigned long rem, curr_addr, s_addr = (unsigned long) addr; - if (unlikely(i->type & ITER_PIPE)) { - WARN_ON(1); - return 0; - } + if (unlikely(i->type & ITER_PIPE)) + return copy_pipe_to_iter_mcsafe(addr, bytes, i); if (iter_is_iovec(i)) might_fault(); iterate_and_advance(i, bytes, v, -- cgit v1.2.3 From 092b31aa2048cf7561a39697974adcd147fbb27b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 8 Jul 2018 13:46:17 -0700 Subject: x86/asm/memcpy_mcsafe: Fix copy_to_user_mcsafe() exception handling All copy_to_user() implementations need to be prepared to handle faults accessing userspace. The __memcpy_mcsafe() implementation handles both mmu-faults on the user destination and machine-check-exceptions on the source buffer. However, the memcpy_mcsafe() wrapper may silently fallback to memcpy() depending on build options and cpu-capabilities. Force copy_to_user_mcsafe() to always use __memcpy_mcsafe() when available, and otherwise disable all of the copy_to_user_mcsafe() infrastructure when __memcpy_mcsafe() is not available, i.e. CONFIG_X86_MCE=n. This fixes crashes of the form: run fstests generic/323 at 2018-07-02 12:46:23 BUG: unable to handle kernel paging request at 00007f0d50001000 RIP: 0010:__memcpy+0x12/0x20 [..] Call Trace: copyout_mcsafe+0x3a/0x50 _copy_to_iter_mcsafe+0xa1/0x4a0 ? dax_alive+0x30/0x50 dax_iomap_actor+0x1f9/0x280 ? dax_iomap_rw+0x100/0x100 iomap_apply+0xba/0x130 ? dax_iomap_rw+0x100/0x100 dax_iomap_rw+0x95/0x100 ? dax_iomap_rw+0x100/0x100 xfs_file_dax_read+0x7b/0x1d0 [xfs] xfs_file_read_iter+0xa7/0xc0 [xfs] aio_read+0x11c/0x1a0 Reported-by: Ross Zwisler Tested-by: Ross Zwisler Signed-off-by: Dan Williams Cc: Al Viro Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Tony Luck Fixes: 8780356ef630 ("x86/asm/memcpy_mcsafe: Define copy_to_iter_mcsafe()") Link: http://lkml.kernel.org/r/153108277790.37979.1486841789275803399.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 2 +- arch/x86/include/asm/uaccess_64.h | 7 ++++++- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index f1dbb4ee19d7..887d3a7bb646 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -63,7 +63,7 @@ config X86 select ARCH_HAS_PTE_SPECIAL select ARCH_HAS_REFCOUNT select ARCH_HAS_UACCESS_FLUSHCACHE if X86_64 - select ARCH_HAS_UACCESS_MCSAFE if X86_64 + select ARCH_HAS_UACCESS_MCSAFE if X86_64 && X86_MCE select ARCH_HAS_SET_MEMORY select ARCH_HAS_SG_CHAIN select ARCH_HAS_STRICT_KERNEL_RWX diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h index 62acb613114b..a9d637bc301d 100644 --- a/arch/x86/include/asm/uaccess_64.h +++ b/arch/x86/include/asm/uaccess_64.h @@ -52,7 +52,12 @@ copy_to_user_mcsafe(void *to, const void *from, unsigned len) unsigned long ret; __uaccess_begin(); - ret = memcpy_mcsafe(to, from, len); + /* + * Note, __memcpy_mcsafe() is explicitly used since it can + * handle exceptions / faults. memcpy_mcsafe() may fall back to + * memcpy() which lacks this handling. + */ + ret = __memcpy_mcsafe(to, from, len); __uaccess_end(); return ret; } -- cgit v1.2.3 From df0c97e2c7d06b4f3cc5855604af79fd1a964619 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 3 Jul 2018 10:52:34 +1000 Subject: drm/nouveau/kms/nv50-: ensure window updates are submitted when flushing mst disables It was possible for this to be skipped when shutting down MST streams, and leaving the core channel interlocked with a wndw channel update that never happens - leading to a hung display. Signed-off-by: Ben Skeggs Tested-By: Lyude Paul --- drivers/gpu/drm/nouveau/dispnv50/disp.c | 45 +++++++++++++++++++-------------- 1 file changed, 26 insertions(+), 19 deletions(-) diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c index b83465ae7c1b..9382e99a0bc7 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c @@ -1585,8 +1585,9 @@ nv50_pior_create(struct drm_connector *connector, struct dcb_output *dcbe) *****************************************************************************/ static void -nv50_disp_atomic_commit_core(struct nouveau_drm *drm, u32 *interlock) +nv50_disp_atomic_commit_core(struct drm_atomic_state *state, u32 *interlock) { + struct nouveau_drm *drm = nouveau_drm(state->dev); struct nv50_disp *disp = nv50_disp(drm->dev); struct nv50_core *core = disp->core; struct nv50_mstm *mstm; @@ -1617,6 +1618,22 @@ nv50_disp_atomic_commit_core(struct nouveau_drm *drm, u32 *interlock) } } +static void +nv50_disp_atomic_commit_wndw(struct drm_atomic_state *state, u32 *interlock) +{ + struct drm_plane_state *new_plane_state; + struct drm_plane *plane; + int i; + + for_each_new_plane_in_state(state, plane, new_plane_state, i) { + struct nv50_wndw *wndw = nv50_wndw(plane); + if (interlock[wndw->interlock.type] & wndw->interlock.data) { + if (wndw->func->update) + wndw->func->update(wndw, interlock); + } + } +} + static void nv50_disp_atomic_commit_tail(struct drm_atomic_state *state) { @@ -1684,7 +1701,8 @@ nv50_disp_atomic_commit_tail(struct drm_atomic_state *state) help->disable(encoder); interlock[NV50_DISP_INTERLOCK_CORE] |= 1; if (outp->flush_disable) { - nv50_disp_atomic_commit_core(drm, interlock); + nv50_disp_atomic_commit_wndw(state, interlock); + nv50_disp_atomic_commit_core(state, interlock); memset(interlock, 0x00, sizeof(interlock)); } } @@ -1693,15 +1711,8 @@ nv50_disp_atomic_commit_tail(struct drm_atomic_state *state) /* Flush disable. */ if (interlock[NV50_DISP_INTERLOCK_CORE]) { if (atom->flush_disable) { - for_each_new_plane_in_state(state, plane, new_plane_state, i) { - struct nv50_wndw *wndw = nv50_wndw(plane); - if (interlock[wndw->interlock.type] & wndw->interlock.data) { - if (wndw->func->update) - wndw->func->update(wndw, interlock); - } - } - - nv50_disp_atomic_commit_core(drm, interlock); + nv50_disp_atomic_commit_wndw(state, interlock); + nv50_disp_atomic_commit_core(state, interlock); memset(interlock, 0x00, sizeof(interlock)); } } @@ -1762,18 +1773,14 @@ nv50_disp_atomic_commit_tail(struct drm_atomic_state *state) } /* Flush update. */ - for_each_new_plane_in_state(state, plane, new_plane_state, i) { - struct nv50_wndw *wndw = nv50_wndw(plane); - if (interlock[wndw->interlock.type] & wndw->interlock.data) { - if (wndw->func->update) - wndw->func->update(wndw, interlock); - } - } + nv50_disp_atomic_commit_wndw(state, interlock); if (interlock[NV50_DISP_INTERLOCK_CORE]) { if (interlock[NV50_DISP_INTERLOCK_BASE] || + interlock[NV50_DISP_INTERLOCK_OVLY] || + interlock[NV50_DISP_INTERLOCK_WNDW] || !atom->state.legacy_cursor_update) - nv50_disp_atomic_commit_core(drm, interlock); + nv50_disp_atomic_commit_core(state, interlock); else disp->core->func->update(disp->core, interlock, false); } -- cgit v1.2.3 From 7f073d011f93e92d4d225526b9ab6b8b0bbd6613 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 3 Jul 2018 15:30:56 +0300 Subject: drm/nouveau/gem: off by one bugs in nouveau_gem_pushbuf_reloc_apply() The bo array has req->nr_buffers elements so the > should be >= so we don't read beyond the end of the array. Fixes: a1606a9596e5 ("drm/nouveau: new gem pushbuf interface, bump to 0.0.16") Signed-off-by: Dan Carpenter Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_gem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c index 300daee74209..e6ccafcb9c41 100644 --- a/drivers/gpu/drm/nouveau/nouveau_gem.c +++ b/drivers/gpu/drm/nouveau/nouveau_gem.c @@ -616,7 +616,7 @@ nouveau_gem_pushbuf_reloc_apply(struct nouveau_cli *cli, struct nouveau_bo *nvbo; uint32_t data; - if (unlikely(r->bo_index > req->nr_buffers)) { + if (unlikely(r->bo_index >= req->nr_buffers)) { NV_PRINTK(err, cli, "reloc bo index invalid\n"); ret = -EINVAL; break; @@ -626,7 +626,7 @@ nouveau_gem_pushbuf_reloc_apply(struct nouveau_cli *cli, if (b->presumed.valid) continue; - if (unlikely(r->reloc_bo_index > req->nr_buffers)) { + if (unlikely(r->reloc_bo_index >= req->nr_buffers)) { NV_PRINTK(err, cli, "reloc container bo index invalid\n"); ret = -EINVAL; break; -- cgit v1.2.3 From 22b76bbe089cd901f5260ecb9a3dc41f9edb97a0 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Fri, 13 Jul 2018 13:06:32 -0400 Subject: drm/nouveau: Use drm_connector_list_iter_* for iterating connectors Every codepath in nouveau that loops through the connector list currently does so using the old method, which is prone to race conditions from MST connectors being created and destroyed. This has been causing a multitude of problems, including memory corruption from trying to access connectors that have already been freed! Signed-off-by: Lyude Paul Cc: stable@vger.kernel.org Cc: Karol Herbst Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_backlight.c | 6 ++++-- drivers/gpu/drm/nouveau/nouveau_connector.c | 9 +++++++-- drivers/gpu/drm/nouveau/nouveau_connector.h | 14 ++++++++++---- drivers/gpu/drm/nouveau/nouveau_display.c | 10 ++++++++-- 4 files changed, 29 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c b/drivers/gpu/drm/nouveau/nouveau_backlight.c index debbbf0fd4bd..408b955e5c39 100644 --- a/drivers/gpu/drm/nouveau/nouveau_backlight.c +++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c @@ -267,6 +267,7 @@ nouveau_backlight_init(struct drm_device *dev) struct nouveau_drm *drm = nouveau_drm(dev); struct nvif_device *device = &drm->client.device; struct drm_connector *connector; + struct drm_connector_list_iter conn_iter; INIT_LIST_HEAD(&drm->bl_connectors); @@ -275,7 +276,8 @@ nouveau_backlight_init(struct drm_device *dev) return 0; } - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { if (connector->connector_type != DRM_MODE_CONNECTOR_LVDS && connector->connector_type != DRM_MODE_CONNECTOR_eDP) continue; @@ -292,7 +294,7 @@ nouveau_backlight_init(struct drm_device *dev) break; } } - + drm_connector_list_iter_end(&conn_iter); return 0; } diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 7b557c354307..7dc380449232 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -1208,14 +1208,19 @@ nouveau_connector_create(struct drm_device *dev, int index) struct nouveau_display *disp = nouveau_display(dev); struct nouveau_connector *nv_connector = NULL; struct drm_connector *connector; + struct drm_connector_list_iter conn_iter; int type, ret = 0; bool dummy; - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { nv_connector = nouveau_connector(connector); - if (nv_connector->index == index) + if (nv_connector->index == index) { + drm_connector_list_iter_end(&conn_iter); return connector; + } } + drm_connector_list_iter_end(&conn_iter); nv_connector = kzalloc(sizeof(*nv_connector), GFP_KERNEL); if (!nv_connector) diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.h b/drivers/gpu/drm/nouveau/nouveau_connector.h index a4d1a059bd3d..a8cbb4b56fc7 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.h +++ b/drivers/gpu/drm/nouveau/nouveau_connector.h @@ -65,14 +65,20 @@ nouveau_crtc_connector_get(struct nouveau_crtc *nv_crtc) { struct drm_device *dev = nv_crtc->base.dev; struct drm_connector *connector; + struct drm_connector_list_iter conn_iter; + struct nouveau_connector *nv_connector = NULL; struct drm_crtc *crtc = to_drm_crtc(nv_crtc); - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - if (connector->encoder && connector->encoder->crtc == crtc) - return nouveau_connector(connector); + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { + if (connector->encoder && connector->encoder->crtc == crtc) { + nv_connector = nouveau_connector(connector); + break; + } } + drm_connector_list_iter_end(&conn_iter); - return NULL; + return nv_connector; } struct drm_connector * diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 774b429142bc..46b8430ef4aa 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -404,6 +404,7 @@ nouveau_display_init(struct drm_device *dev) struct nouveau_display *disp = nouveau_display(dev); struct nouveau_drm *drm = nouveau_drm(dev); struct drm_connector *connector; + struct drm_connector_list_iter conn_iter; int ret; ret = disp->init(dev); @@ -411,10 +412,12 @@ nouveau_display_init(struct drm_device *dev) return ret; /* enable hotplug interrupts */ - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { struct nouveau_connector *conn = nouveau_connector(connector); nvif_notify_get(&conn->hpd); } + drm_connector_list_iter_end(&conn_iter); /* enable flip completion events */ nvif_notify_get(&drm->flip); @@ -427,6 +430,7 @@ nouveau_display_fini(struct drm_device *dev, bool suspend) struct nouveau_display *disp = nouveau_display(dev); struct nouveau_drm *drm = nouveau_drm(dev); struct drm_connector *connector; + struct drm_connector_list_iter conn_iter; if (!suspend) { if (drm_drv_uses_atomic_modeset(dev)) @@ -439,10 +443,12 @@ nouveau_display_fini(struct drm_device *dev, bool suspend) nvif_notify_put(&drm->flip); /* disable hotplug interrupts */ - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { struct nouveau_connector *conn = nouveau_connector(connector); nvif_notify_put(&conn->hpd); } + drm_connector_list_iter_end(&conn_iter); drm_kms_helper_poll_disable(dev); disp->fini(dev); -- cgit v1.2.3 From 37afe55b4ae0600deafe7c0e0e658593c4754f1b Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Fri, 13 Jul 2018 13:06:33 -0400 Subject: drm/nouveau: Avoid looping through fake MST connectors When MST and atomic were introduced to nouveau, another structure that could contain a drm_connector embedded within it was introduced; struct nv50_mstc. This meant that we no longer would be able to simply loop through our connector list and assume that nouveau_connector() would return a proper pointer for each connector, since the assertion that all connectors coming from nouveau have a full nouveau_connector struct became invalid. Unfortunately, none of the actual code that looped through connectors ever got updated, which means that we've been causing invalid memory accesses for quite a while now. An example that was caught by KASAN: [ 201.038698] ================================================================== [ 201.038792] BUG: KASAN: slab-out-of-bounds in nvif_notify_get+0x190/0x1a0 [nouveau] [ 201.038797] Read of size 4 at addr ffff88076738c650 by task kworker/0:3/718 [ 201.038800] [ 201.038822] CPU: 0 PID: 718 Comm: kworker/0:3 Tainted: G O 4.18.0-rc4Lyude-Test+ #1 [ 201.038825] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018 [ 201.038882] Workqueue: events nouveau_display_hpd_work [nouveau] [ 201.038887] Call Trace: [ 201.038894] dump_stack+0xa4/0xfd [ 201.038900] print_address_description+0x71/0x239 [ 201.038929] ? nvif_notify_get+0x190/0x1a0 [nouveau] [ 201.038935] kasan_report.cold.6+0x242/0x2fe [ 201.038942] __asan_report_load4_noabort+0x19/0x20 [ 201.038970] nvif_notify_get+0x190/0x1a0 [nouveau] [ 201.038998] ? nvif_notify_put+0x1f0/0x1f0 [nouveau] [ 201.039003] ? kmsg_dump_rewind_nolock+0xe4/0xe4 [ 201.039049] nouveau_display_init.cold.12+0x34/0x39 [nouveau] [ 201.039089] ? nouveau_user_framebuffer_create+0x120/0x120 [nouveau] [ 201.039133] nouveau_display_resume+0x5c0/0x810 [nouveau] [ 201.039173] ? nvkm_client_ioctl+0x20/0x20 [nouveau] [ 201.039215] nouveau_do_resume+0x19f/0x570 [nouveau] [ 201.039256] nouveau_pmops_runtime_resume+0xd8/0x2a0 [nouveau] [ 201.039264] pci_pm_runtime_resume+0x130/0x250 [ 201.039269] ? pci_restore_standard_config+0x70/0x70 [ 201.039275] __rpm_callback+0x1f2/0x5d0 [ 201.039279] ? rpm_resume+0x560/0x18a0 [ 201.039283] ? pci_restore_standard_config+0x70/0x70 [ 201.039287] ? pci_restore_standard_config+0x70/0x70 [ 201.039291] ? pci_restore_standard_config+0x70/0x70 [ 201.039296] rpm_callback+0x175/0x210 [ 201.039300] ? pci_restore_standard_config+0x70/0x70 [ 201.039305] rpm_resume+0xcc3/0x18a0 [ 201.039312] ? rpm_callback+0x210/0x210 [ 201.039317] ? __pm_runtime_resume+0x9e/0x100 [ 201.039322] ? kasan_check_write+0x14/0x20 [ 201.039326] ? do_raw_spin_lock+0xc2/0x1c0 [ 201.039333] __pm_runtime_resume+0xac/0x100 [ 201.039374] nouveau_display_hpd_work+0x67/0x1f0 [nouveau] [ 201.039380] process_one_work+0x7a0/0x14d0 [ 201.039388] ? cancel_delayed_work_sync+0x20/0x20 [ 201.039392] ? lock_acquire+0x113/0x310 [ 201.039398] ? kasan_check_write+0x14/0x20 [ 201.039402] ? do_raw_spin_lock+0xc2/0x1c0 [ 201.039409] worker_thread+0x86/0xb50 [ 201.039418] kthread+0x2e9/0x3a0 [ 201.039422] ? process_one_work+0x14d0/0x14d0 [ 201.039426] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 201.039431] ret_from_fork+0x3a/0x50 [ 201.039441] [ 201.039444] Allocated by task 79: [ 201.039449] save_stack+0x43/0xd0 [ 201.039452] kasan_kmalloc+0xc4/0xe0 [ 201.039456] kmem_cache_alloc_trace+0x10a/0x260 [ 201.039494] nv50_mstm_add_connector+0x9a/0x340 [nouveau] [ 201.039504] drm_dp_add_port+0xff5/0x1fc0 [drm_kms_helper] [ 201.039511] drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper] [ 201.039518] drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper] [ 201.039525] drm_dp_mst_link_probe_work+0x71/0xb0 [drm_kms_helper] [ 201.039529] process_one_work+0x7a0/0x14d0 [ 201.039533] worker_thread+0x86/0xb50 [ 201.039537] kthread+0x2e9/0x3a0 [ 201.039541] ret_from_fork+0x3a/0x50 [ 201.039543] [ 201.039546] Freed by task 0: [ 201.039549] (stack is not available) [ 201.039551] [ 201.039555] The buggy address belongs to the object at ffff88076738c1a8 which belongs to the cache kmalloc-2048 of size 2048 [ 201.039559] The buggy address is located 1192 bytes inside of 2048-byte region [ffff88076738c1a8, ffff88076738c9a8) [ 201.039563] The buggy address belongs to the page: [ 201.039567] page:ffffea001d9ce200 count:1 mapcount:0 mapping:ffff88084000d0c0 index:0x0 compound_mapcount: 0 [ 201.039573] flags: 0x8000000000008100(slab|head) [ 201.039578] raw: 8000000000008100 ffffea001da3be08 ffffea001da25a08 ffff88084000d0c0 [ 201.039582] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000 [ 201.039585] page dumped because: kasan: bad access detected [ 201.039588] [ 201.039591] Memory state around the buggy address: [ 201.039594] ffff88076738c500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 201.039598] ffff88076738c580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 201.039601] >ffff88076738c600: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc [ 201.039604] ^ [ 201.039607] ffff88076738c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 201.039611] ffff88076738c700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 201.039613] ================================================================== Signed-off-by: Lyude Paul Cc: stable@vger.kernel.org Cc: Karol Herbst Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_connector.c | 2 +- drivers/gpu/drm/nouveau/nouveau_connector.h | 24 +++++++++++++++++++++++- drivers/gpu/drm/nouveau/nouveau_display.c | 4 ++-- 3 files changed, 26 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 7dc380449232..af68eae4c626 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -1213,7 +1213,7 @@ nouveau_connector_create(struct drm_device *dev, int index) bool dummy; drm_connector_list_iter_begin(dev, &conn_iter); - drm_for_each_connector_iter(connector, &conn_iter) { + nouveau_for_each_non_mst_connector_iter(connector, &conn_iter) { nv_connector = nouveau_connector(connector); if (nv_connector->index == index) { drm_connector_list_iter_end(&conn_iter); diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.h b/drivers/gpu/drm/nouveau/nouveau_connector.h index a8cbb4b56fc7..dc7454e7f19a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.h +++ b/drivers/gpu/drm/nouveau/nouveau_connector.h @@ -33,6 +33,7 @@ #include #include #include "nouveau_crtc.h" +#include "nouveau_encoder.h" struct nvkm_i2c_port; @@ -60,6 +61,27 @@ static inline struct nouveau_connector *nouveau_connector( return container_of(con, struct nouveau_connector, base); } +static inline bool +nouveau_connector_is_mst(struct drm_connector *connector) +{ + const struct nouveau_encoder *nv_encoder; + const struct drm_encoder *encoder; + + if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) + return false; + + nv_encoder = find_encoder(connector, DCB_OUTPUT_ANY); + if (!nv_encoder) + return false; + + encoder = &nv_encoder->base.base; + return encoder->encoder_type == DRM_MODE_ENCODER_DPMST; +} + +#define nouveau_for_each_non_mst_connector_iter(connector, iter) \ + drm_for_each_connector_iter(connector, iter) \ + for_each_if(!nouveau_connector_is_mst(connector)) + static inline struct nouveau_connector * nouveau_crtc_connector_get(struct nouveau_crtc *nv_crtc) { @@ -70,7 +92,7 @@ nouveau_crtc_connector_get(struct nouveau_crtc *nv_crtc) struct drm_crtc *crtc = to_drm_crtc(nv_crtc); drm_connector_list_iter_begin(dev, &conn_iter); - drm_for_each_connector_iter(connector, &conn_iter) { + nouveau_for_each_non_mst_connector_iter(connector, &conn_iter) { if (connector->encoder && connector->encoder->crtc == crtc) { nv_connector = nouveau_connector(connector); break; diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 46b8430ef4aa..ec7861457b84 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -413,7 +413,7 @@ nouveau_display_init(struct drm_device *dev) /* enable hotplug interrupts */ drm_connector_list_iter_begin(dev, &conn_iter); - drm_for_each_connector_iter(connector, &conn_iter) { + nouveau_for_each_non_mst_connector_iter(connector, &conn_iter) { struct nouveau_connector *conn = nouveau_connector(connector); nvif_notify_get(&conn->hpd); } @@ -444,7 +444,7 @@ nouveau_display_fini(struct drm_device *dev, bool suspend) /* disable hotplug interrupts */ drm_connector_list_iter_begin(dev, &conn_iter); - drm_for_each_connector_iter(connector, &conn_iter) { + nouveau_for_each_non_mst_connector_iter(connector, &conn_iter) { struct nouveau_connector *conn = nouveau_connector(connector); nvif_notify_put(&conn->hpd); } -- cgit v1.2.3 From e5d54f1935722f83df7619f3978f774c2b802cd8 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Thu, 12 Jul 2018 13:02:53 -0400 Subject: drm/nouveau/drm/nouveau: Fix runtime PM leak in nv50_disp_atomic_commit() A CRTC being enabled doesn't mean it's on! It doesn't even necessarily mean it's being used. This fixes runtime PM leaks on the P50 I've got next to me. Signed-off-by: Lyude Paul Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/dispnv50/disp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c index 9382e99a0bc7..31b12b4f321a 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c @@ -1878,7 +1878,7 @@ nv50_disp_atomic_commit(struct drm_device *dev, nv50_disp_atomic_commit_tail(state); drm_for_each_crtc(crtc, dev) { - if (crtc->state->enable) { + if (crtc->state->active) { if (!drm->have_disp_power_ref) { drm->have_disp_power_ref = true; return 0; -- cgit v1.2.3 From 68fe23a626b67b56c912c496ea43ed537ea9708f Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Thu, 12 Jul 2018 13:02:54 -0400 Subject: drm/nouveau: Remove bogus crtc check in pmops_runtime_idle This both uses the legacy modesetting structures in a racy manner, and additionally also doesn't even check the right variable (enabled != the CRTC is actually turned on for atomic). This fixes issues on my P50 regarding the dedicated GPU not entering runtime suspend. Signed-off-by: Lyude Paul Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_drm.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 775443c9af94..514903338782 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -874,22 +874,11 @@ nouveau_pmops_runtime_resume(struct device *dev) static int nouveau_pmops_runtime_idle(struct device *dev) { - struct pci_dev *pdev = to_pci_dev(dev); - struct drm_device *drm_dev = pci_get_drvdata(pdev); - struct nouveau_drm *drm = nouveau_drm(drm_dev); - struct drm_crtc *crtc; - if (!nouveau_pmops_runtime()) { pm_runtime_forbid(dev); return -EBUSY; } - list_for_each_entry(crtc, &drm->dev->mode_config.crtc_list, head) { - if (crtc->enabled) { - DRM_DEBUG_DRIVER("failing to power off - crtc active\n"); - return -EBUSY; - } - } pm_runtime_mark_last_busy(dev); pm_runtime_autosuspend(dev); /* we don't want the main rpm_idle to call suspend - we want to autosuspend */ -- cgit v1.2.3 From eb493fbc150f4a28151ae1ee84f24395989f3600 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Tue, 3 Jul 2018 16:31:41 -0400 Subject: drm/nouveau: Set DRIVER_ATOMIC cap earlier to fix debugfs Currently nouveau doesn't actually expose the state debugfs file that's usually provided for any modesetting driver that supports atomic, even if nouveau is loaded with atomic=1. This is due to the fact that the standard debugfs files that DRM creates for atomic drivers is called when drm_get_pci_dev() is called from nouveau_drm.c. This happens well before we've initialized the display core, which is currently responsible for setting the DRIVER_ATOMIC cap. So, move the atomic option into nouveau_drm.c and just add the DRIVER_ATOMIC cap whenever it's enabled on the kernel commandline. This shouldn't cause any actual issues, as the atomic ioctl will still fail as expected even if the display core doesn't disable it until later in the init sequence. This also provides the added benefit of being able to use the state debugfs file to check the current display state even if clients aren't allowed to modify it through anything other than the legacy ioctls. Additionally, disable the DRIVER_ATOMIC cap in nv04's display core, as this was already disabled there previously. Signed-off-by: Lyude Paul Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/dispnv04/disp.c | 3 +++ drivers/gpu/drm/nouveau/dispnv50/disp.c | 6 ------ drivers/gpu/drm/nouveau/nouveau_drm.c | 7 +++++++ 3 files changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/nouveau/dispnv04/disp.c b/drivers/gpu/drm/nouveau/dispnv04/disp.c index 501d2d290e9c..70dce544984e 100644 --- a/drivers/gpu/drm/nouveau/dispnv04/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv04/disp.c @@ -55,6 +55,9 @@ nv04_display_create(struct drm_device *dev) nouveau_display(dev)->init = nv04_display_init; nouveau_display(dev)->fini = nv04_display_fini; + /* Pre-nv50 doesn't support atomic, so don't expose the ioctls */ + dev->driver->driver_features &= ~DRIVER_ATOMIC; + nouveau_hw_save_vga_fonts(dev, 1); nv04_crtc_create(dev, 0); diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c index 31b12b4f321a..9bae4db84cfb 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c @@ -2126,10 +2126,6 @@ nv50_display_destroy(struct drm_device *dev) kfree(disp); } -MODULE_PARM_DESC(atomic, "Expose atomic ioctl (default: disabled)"); -static int nouveau_atomic = 0; -module_param_named(atomic, nouveau_atomic, int, 0400); - int nv50_display_create(struct drm_device *dev) { @@ -2154,8 +2150,6 @@ nv50_display_create(struct drm_device *dev) disp->disp = &nouveau_display(dev)->disp; dev->mode_config.funcs = &nv50_disp_func; dev->driver->driver_features |= DRIVER_PREFER_XBGR_30BPP; - if (nouveau_atomic) - dev->driver->driver_features |= DRIVER_ATOMIC; /* small shared memory area we use for notifiers and semaphores */ ret = nouveau_bo_new(&drm->client, 4096, 0x1000, TTM_PL_FLAG_VRAM, diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 514903338782..f5d3158f0378 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -81,6 +81,10 @@ MODULE_PARM_DESC(modeset, "enable driver (default: auto, " int nouveau_modeset = -1; module_param_named(modeset, nouveau_modeset, int, 0400); +MODULE_PARM_DESC(atomic, "Expose atomic ioctl (default: disabled)"); +static int nouveau_atomic = 0; +module_param_named(atomic, nouveau_atomic, int, 0400); + MODULE_PARM_DESC(runpm, "disable (0), force enable (1), optimus only default (-1)"); static int nouveau_runtime_pm = -1; module_param_named(runpm, nouveau_runtime_pm, int, 0400); @@ -509,6 +513,9 @@ static int nouveau_drm_probe(struct pci_dev *pdev, pci_set_master(pdev); + if (nouveau_atomic) + driver_pci.driver_features |= DRIVER_ATOMIC; + ret = drm_get_pci_dev(pdev, pent, &driver_pci); if (ret) { nvkm_device_del(&device); -- cgit v1.2.3 From b9952b5218added5577e4a3443969bc20884cea9 Mon Sep 17 00:00:00 2001 From: Frank Rowand Date: Thu, 12 Jul 2018 14:00:07 -0700 Subject: of: overlay: update phandle cache on overlay apply and remove A comment in the review of the patch adding the phandle cache said that the cache would have to be updated when modules are applied and removed. This patch implements the cache updates. Fixes: 0b3ce78e90fc ("of: cache phandle nodes to reduce cost of of_find_node_by_phandle()") Reported-by: Alan Tull Suggested-by: Alan Tull Signed-off-by: Frank Rowand Signed-off-by: Rob Herring --- drivers/of/base.c | 6 +++--- drivers/of/of_private.h | 2 ++ drivers/of/overlay.c | 11 +++++++++++ 3 files changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/of/base.c b/drivers/of/base.c index 848f549164cd..466e3c8582f0 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -102,7 +102,7 @@ static u32 phandle_cache_mask; * - the phandle lookup overhead reduction provided by the cache * will likely be less */ -static void of_populate_phandle_cache(void) +void of_populate_phandle_cache(void) { unsigned long flags; u32 cache_entries; @@ -134,8 +134,7 @@ out: raw_spin_unlock_irqrestore(&devtree_lock, flags); } -#ifndef CONFIG_MODULES -static int __init of_free_phandle_cache(void) +int of_free_phandle_cache(void) { unsigned long flags; @@ -148,6 +147,7 @@ static int __init of_free_phandle_cache(void) return 0; } +#if !defined(CONFIG_MODULES) late_initcall_sync(of_free_phandle_cache); #endif diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h index 891d780c076a..216175d11d3d 100644 --- a/drivers/of/of_private.h +++ b/drivers/of/of_private.h @@ -79,6 +79,8 @@ int of_resolve_phandles(struct device_node *tree); #if defined(CONFIG_OF_OVERLAY) void of_overlay_mutex_lock(void); void of_overlay_mutex_unlock(void); +int of_free_phandle_cache(void); +void of_populate_phandle_cache(void); #else static inline void of_overlay_mutex_lock(void) {}; static inline void of_overlay_mutex_unlock(void) {}; diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c index 7baa53e5b1d7..eda57ef12fd0 100644 --- a/drivers/of/overlay.c +++ b/drivers/of/overlay.c @@ -804,6 +804,8 @@ static int of_overlay_apply(const void *fdt, struct device_node *tree, goto err_free_overlay_changeset; } + of_populate_phandle_cache(); + ret = __of_changeset_apply_notify(&ovcs->cset); if (ret) pr_err("overlay changeset entry notify error %d\n", ret); @@ -1046,8 +1048,17 @@ int of_overlay_remove(int *ovcs_id) list_del(&ovcs->ovcs_list); + /* + * Disable phandle cache. Avoids race condition that would arise + * from removing cache entry when the associated node is deleted. + */ + of_free_phandle_cache(); + ret_apply = 0; ret = __of_changeset_revert_entries(&ovcs->cset, &ret_apply); + + of_populate_phandle_cache(); + if (ret) { if (ret_apply) devicetree_state_flags |= DTSF_REVERT_FAIL; -- cgit v1.2.3 From 9a6249d2a145226ec1b294116fcb08744cf7ab56 Mon Sep 17 00:00:00 2001 From: Po-Hsu Lin Date: Mon, 16 Jul 2018 15:50:08 +0800 Subject: ALSA: hda: add mute led support for HP ProBook 455 G5 Audio mute led does not work on HP ProBook 455 G5, this can be fixed by using CXT_FIXUP_MUTE_LED_GPIO to support it. BugLink: https://bugs.launchpad.net/bugs/1781763 Reported-by: James Buren Signed-off-by: Po-Hsu Lin Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index e7fcfc3b8885..f641c20095f7 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -964,6 +964,7 @@ static const struct snd_pci_quirk cxt5066_fixups[] = { SND_PCI_QUIRK(0x103c, 0x8115, "HP Z1 Gen3", CXT_FIXUP_HP_GATE_MIC), SND_PCI_QUIRK(0x103c, 0x814f, "HP ZBook 15u G3", CXT_FIXUP_MUTE_LED_GPIO), SND_PCI_QUIRK(0x103c, 0x822e, "HP ProBook 440 G4", CXT_FIXUP_MUTE_LED_GPIO), + SND_PCI_QUIRK(0x103c, 0x836e, "HP ProBook 455 G5", CXT_FIXUP_MUTE_LED_GPIO), SND_PCI_QUIRK(0x103c, 0x8299, "HP 800 G3 SFF", CXT_FIXUP_HP_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x829a, "HP 800 G3 DM", CXT_FIXUP_HP_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x8455, "HP Z2 G4", CXT_FIXUP_HP_MIC_NO_PRESENCE), -- cgit v1.2.3 From 0fca97a29b83e3f315c14ed2372cfd0f9ee0a006 Mon Sep 17 00:00:00 2001 From: YOKOTA Hiroshi Date: Sun, 1 Jul 2018 18:30:01 +0900 Subject: ALSA: hda/realtek - Add Panasonic CF-SZ6 headset jack quirk This adds some required quirk when uses headset or headphone on Panasonic CF-SZ6. Signed-off-by: YOKOTA Hiroshi Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 7496be4491b1..b8a21ff8e68c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6569,6 +6569,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x10cf, 0x1629, "Lifebook U7x7", ALC255_FIXUP_LIFEBOOK_U7x7_HEADSET_MIC), SND_PCI_QUIRK(0x10cf, 0x1845, "Lifebook U904", ALC269_FIXUP_LIFEBOOK_EXTMIC), SND_PCI_QUIRK(0x10ec, 0x10f2, "Intel Reference board", ALC700_FIXUP_INTEL_REFERENCE), + SND_PCI_QUIRK(0x10f7, 0x8338, "Panasonic CF-SZ6", ALC269_FIXUP_HEADSET_MODE), SND_PCI_QUIRK(0x144d, 0xc109, "Samsung Ativ book 9 (NP900X3G)", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x144d, 0xc740, "Samsung Ativ book 8 (NP870Z5G)", ALC269_FIXUP_ATIV_BOOK_8), SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_HEADSET_MIC), -- cgit v1.2.3 From 6f6060a5c9cc76fdbc22748264e6aa3779ec2427 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Mon, 9 Jul 2018 16:35:34 +0300 Subject: x86/apm: Don't access __preempt_count with zeroed fs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit APM_DO_POP_SEGS does not restore fs/gs which were zeroed by APM_DO_ZERO_SEGS. Trying to access __preempt_count with zeroed fs doesn't really work. Move the ibrs call outside the APM_DO_SAVE_SEGS/APM_DO_RESTORE_SEGS invocations so that fs is actually restored before calling preempt_enable(). Fixes the following sort of oopses: [ 0.313581] general protection fault: 0000 [#1] PREEMPT SMP [ 0.313803] Modules linked in: [ 0.314040] CPU: 0 PID: 268 Comm: kapmd Not tainted 4.16.0-rc1-triton-bisect-00090-gdd84441a7971 #19 [ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 [ 0.316161] EFLAGS: 00210016 CPU: 0 [ 0.316161] EAX: 00000102 EBX: 00000000 ECX: 00000102 EDX: 00000000 [ 0.316161] ESI: 0000530e EDI: dea95f64 EBP: dea95f18 ESP: dea95ef0 [ 0.316161] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 0.316161] CR0: 80050033 CR2: 00000000 CR3: 015d3000 CR4: 000006d0 [ 0.316161] Call Trace: [ 0.316161] ? cpumask_weight.constprop.15+0x20/0x20 [ 0.316161] on_cpu0+0x44/0x70 [ 0.316161] apm+0x54e/0x720 [ 0.316161] ? __switch_to_asm+0x26/0x40 [ 0.316161] ? __schedule+0x17d/0x590 [ 0.316161] kthread+0xc0/0xf0 [ 0.316161] ? proc_apm_show+0x150/0x150 [ 0.316161] ? kthread_create_worker_on_cpu+0x20/0x20 [ 0.316161] ret_from_fork+0x2e/0x38 [ 0.316161] Code: da 8e c2 8e e2 8e ea 57 55 2e ff 1d e0 bb 5d b1 0f 92 c3 5d 5f 07 1f 89 47 0c 90 8d b4 26 00 00 00 00 90 8d b4 26 00 00 00 00 90 <64> ff 0d 84 16 5c b1 74 7f 8b 45 dc 8e e0 8b 45 d8 8e e8 8b 45 [ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 SS:ESP: 0068:dea95ef0 [ 0.316161] ---[ end trace 656253db2deaa12c ]--- Fixes: dd84441a7971 ("x86/speculation: Use IBRS if available before calling into firmware") Signed-off-by: Ville Syrjälä Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Cc: David Woodhouse Cc: "H. Peter Anvin" Cc: x86@kernel.org Cc: David Woodhouse Cc: "H. Peter Anvin" Link: https://lkml.kernel.org/r/20180709133534.5963-1-ville.syrjala@linux.intel.com --- arch/x86/include/asm/apm.h | 6 ------ arch/x86/kernel/apm_32.c | 5 +++++ 2 files changed, 5 insertions(+), 6 deletions(-) diff --git a/arch/x86/include/asm/apm.h b/arch/x86/include/asm/apm.h index c356098b6fb9..4d4015ddcf26 100644 --- a/arch/x86/include/asm/apm.h +++ b/arch/x86/include/asm/apm.h @@ -7,8 +7,6 @@ #ifndef _ASM_X86_MACH_DEFAULT_APM_H #define _ASM_X86_MACH_DEFAULT_APM_H -#include - #ifdef APM_ZERO_SEGS # define APM_DO_ZERO_SEGS \ "pushl %%ds\n\t" \ @@ -34,7 +32,6 @@ static inline void apm_bios_call_asm(u32 func, u32 ebx_in, u32 ecx_in, * N.B. We do NOT need a cld after the BIOS call * because we always save and restore the flags. */ - firmware_restrict_branch_speculation_start(); __asm__ __volatile__(APM_DO_ZERO_SEGS "pushl %%edi\n\t" "pushl %%ebp\n\t" @@ -47,7 +44,6 @@ static inline void apm_bios_call_asm(u32 func, u32 ebx_in, u32 ecx_in, "=S" (*esi) : "a" (func), "b" (ebx_in), "c" (ecx_in) : "memory", "cc"); - firmware_restrict_branch_speculation_end(); } static inline bool apm_bios_call_simple_asm(u32 func, u32 ebx_in, @@ -60,7 +56,6 @@ static inline bool apm_bios_call_simple_asm(u32 func, u32 ebx_in, * N.B. We do NOT need a cld after the BIOS call * because we always save and restore the flags. */ - firmware_restrict_branch_speculation_start(); __asm__ __volatile__(APM_DO_ZERO_SEGS "pushl %%edi\n\t" "pushl %%ebp\n\t" @@ -73,7 +68,6 @@ static inline bool apm_bios_call_simple_asm(u32 func, u32 ebx_in, "=S" (si) : "a" (func), "b" (ebx_in), "c" (ecx_in) : "memory", "cc"); - firmware_restrict_branch_speculation_end(); return error; } diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 5d0de79fdab0..ec00d1ff5098 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -240,6 +240,7 @@ #include #include #include +#include #if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) extern int (*console_blank_hook)(int); @@ -614,11 +615,13 @@ static long __apm_bios_call(void *_call) gdt[0x40 / 8] = bad_bios_desc; apm_irq_save(flags); + firmware_restrict_branch_speculation_start(); APM_DO_SAVE_SEGS; apm_bios_call_asm(call->func, call->ebx, call->ecx, &call->eax, &call->ebx, &call->ecx, &call->edx, &call->esi); APM_DO_RESTORE_SEGS; + firmware_restrict_branch_speculation_end(); apm_irq_restore(flags); gdt[0x40 / 8] = save_desc_40; put_cpu(); @@ -690,10 +693,12 @@ static long __apm_bios_call_simple(void *_call) gdt[0x40 / 8] = bad_bios_desc; apm_irq_save(flags); + firmware_restrict_branch_speculation_start(); APM_DO_SAVE_SEGS; error = apm_bios_call_simple_asm(call->func, call->ebx, call->ecx, &call->eax); APM_DO_RESTORE_SEGS; + firmware_restrict_branch_speculation_end(); apm_irq_restore(flags); gdt[0x40 / 8] = save_desc_40; put_cpu(); -- cgit v1.2.3 From d1b47a7c9efcf3c3384b70f6e3c8f1423b44d8c7 Mon Sep 17 00:00:00 2001 From: Pavel Tatashin Date: Mon, 16 Jul 2018 11:16:30 -0400 Subject: mm: don't do zero_resv_unavail if memmap is not allocated Moving zero_resv_unavail before memmap_init_zone(), caused a regression on x86-32. The cause is that we access struct pages before they are allocated when CONFIG_FLAT_NODE_MEM_MAP is used. free_area_init_nodes() zero_resv_unavail() mm_zero_struct_page(pfn_to_page(pfn)); <- struct page is not alloced free_area_init_node() if CONFIG_FLAT_NODE_MEM_MAP alloc_node_mem_map() memblock_virt_alloc_node_nopanic() <- struct page alloced here On the other hand memblock_virt_alloc_node_nopanic() zeroes all the memory that it returns, so we do not need to do zero_resv_unavail() here. Fixes: e181ae0c5db9 ("mm: zero unavailable pages before memmap init") Signed-off-by: Pavel Tatashin Tested-by: Matt Hart Acked-by: Michal Hocko Signed-off-by: Linus Torvalds --- include/linux/mm.h | 2 +- mm/page_alloc.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/include/linux/mm.h b/include/linux/mm.h index a0fbb9ffe380..3982c83fdcbf 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -2132,7 +2132,7 @@ extern int __meminit __early_pfn_to_nid(unsigned long pfn, struct mminit_pfnnid_cache *state); #endif -#ifdef CONFIG_HAVE_MEMBLOCK +#if defined(CONFIG_HAVE_MEMBLOCK) && !defined(CONFIG_FLAT_NODE_MEM_MAP) void zero_resv_unavail(void); #else static inline void zero_resv_unavail(void) {} diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 5d800d61ddb7..a790ef4be74e 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -6383,7 +6383,7 @@ void __paginginit free_area_init_node(int nid, unsigned long *zones_size, free_area_init_core(pgdat); } -#ifdef CONFIG_HAVE_MEMBLOCK +#if defined(CONFIG_HAVE_MEMBLOCK) && !defined(CONFIG_FLAT_NODE_MEM_MAP) /* * Only struct pages that are backed by physical memory are zeroed and * initialized by going through __init_single_page(). But, there are some @@ -6421,7 +6421,7 @@ void __paginginit zero_resv_unavail(void) if (pgcnt) pr_info("Reserved but unavailable: %lld pages", pgcnt); } -#endif /* CONFIG_HAVE_MEMBLOCK */ +#endif /* CONFIG_HAVE_MEMBLOCK && !CONFIG_FLAT_NODE_MEM_MAP */ #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP -- cgit v1.2.3 From 6e2059b53f9885f202b086d7b4ca10a98926e974 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Tue, 10 Jul 2018 22:41:26 +0800 Subject: ipv4/igmp: init group mode as INCLUDE when join source group Based on RFC3376 5.1 If no interface state existed for that multicast address before the change (i.e., the change consisted of creating a new per-interface record), or if no state exists after the change (i.e., the change consisted of deleting a per-interface record), then the "non-existent" state is considered to have a filter mode of INCLUDE and an empty source list. Which means a new multicast group should start with state IN(). Function ip_mc_join_group() works correctly for IGMP ASM(Any-Source Multicast) mode. It adds a group with state EX() and inits crcount to mc_qrv, so the kernel will send a TO_EX() report message after adding group. But for IGMPv3 SSM(Source-specific multicast) JOIN_SOURCE_GROUP mode, we split the group joining into two steps. First we join the group like ASM, i.e. via ip_mc_join_group(). So the state changes from IN() to EX(). Then we add the source-specific address with INCLUDE mode. So the state changes from EX() to IN(A). Before the first step sends a group change record, we finished the second step. So we will only send the second change record. i.e. TO_IN(A). Regarding the RFC stands, we should actually send an ALLOW(A) message for SSM JOIN_SOURCE_GROUP as the state should mimic the 'IN() to IN(A)' transition. The issue was exposed by commit a052517a8ff65 ("net/multicast: should not send source list records when have filter mode change"). Before this change, we used to send both ALLOW(A) and TO_IN(A). After this change we only send TO_IN(A). Fix it by adding a new parameter to init group mode. Also add new wrapper functions so we don't need to change too much code. v1 -> v2: In my first version I only cleared the group change record. But this is not enough. Because when a new group join, it will init as EXCLUDE and trigger an filter mode change in ip/ip6_mc_add_src(), which will clear all source addresses' sf_crcount. This will prevent early joined address sending state change records if multi source addressed joined at the same time. In v2 patch, I fixed it by directly initializing the mode to INCLUDE for SSM JOIN_SOURCE_GROUP. I also split the original patch into two separated patches for IPv4 and IPv6. Fixes: a052517a8ff65 ("net/multicast: should not send source list records when have filter mode change") Reviewed-by: Stefano Brivio Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller --- include/linux/igmp.h | 2 ++ net/ipv4/igmp.c | 58 ++++++++++++++++++++++++++++++++++++-------------- net/ipv4/ip_sockglue.c | 4 ++-- 3 files changed, 46 insertions(+), 18 deletions(-) diff --git a/include/linux/igmp.h b/include/linux/igmp.h index f8231854b5d6..119f53941c12 100644 --- a/include/linux/igmp.h +++ b/include/linux/igmp.h @@ -109,6 +109,8 @@ struct ip_mc_list { extern int ip_check_mc_rcu(struct in_device *dev, __be32 mc_addr, __be32 src_addr, u8 proto); extern int igmp_rcv(struct sk_buff *); extern int ip_mc_join_group(struct sock *sk, struct ip_mreqn *imr); +extern int ip_mc_join_group_ssm(struct sock *sk, struct ip_mreqn *imr, + unsigned int mode); extern int ip_mc_leave_group(struct sock *sk, struct ip_mreqn *imr); extern void ip_mc_drop_socket(struct sock *sk); extern int ip_mc_source(int add, int omode, struct sock *sk, diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 85b617b655bc..b3c899a630a0 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -1200,13 +1200,14 @@ static void igmpv3_del_delrec(struct in_device *in_dev, struct ip_mc_list *im) spin_lock_bh(&im->lock); if (pmc) { im->interface = pmc->interface; - im->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv; im->sfmode = pmc->sfmode; if (pmc->sfmode == MCAST_INCLUDE) { im->tomb = pmc->tomb; im->sources = pmc->sources; for (psf = im->sources; psf; psf = psf->sf_next) - psf->sf_crcount = im->crcount; + psf->sf_crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv; + } else { + im->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv; } in_dev_put(pmc->interface); kfree(pmc); @@ -1288,7 +1289,7 @@ static void igmp_group_dropped(struct ip_mc_list *im) #endif } -static void igmp_group_added(struct ip_mc_list *im) +static void igmp_group_added(struct ip_mc_list *im, unsigned int mode) { struct in_device *in_dev = im->interface; #ifdef CONFIG_IP_MULTICAST @@ -1316,7 +1317,13 @@ static void igmp_group_added(struct ip_mc_list *im) } /* else, v3 */ - im->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv; + /* Based on RFC3376 5.1, for newly added INCLUDE SSM, we should + * not send filter-mode change record as the mode should be from + * IN() to IN(A). + */ + if (mode == MCAST_EXCLUDE) + im->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv; + igmp_ifc_event(in_dev); #endif } @@ -1381,8 +1388,7 @@ static void ip_mc_hash_remove(struct in_device *in_dev, /* * A socket has joined a multicast group on device dev. */ - -void ip_mc_inc_group(struct in_device *in_dev, __be32 addr) +void __ip_mc_inc_group(struct in_device *in_dev, __be32 addr, unsigned int mode) { struct ip_mc_list *im; #ifdef CONFIG_IP_MULTICAST @@ -1394,7 +1400,7 @@ void ip_mc_inc_group(struct in_device *in_dev, __be32 addr) for_each_pmc_rtnl(in_dev, im) { if (im->multiaddr == addr) { im->users++; - ip_mc_add_src(in_dev, &addr, MCAST_EXCLUDE, 0, NULL, 0); + ip_mc_add_src(in_dev, &addr, mode, 0, NULL, 0); goto out; } } @@ -1408,8 +1414,8 @@ void ip_mc_inc_group(struct in_device *in_dev, __be32 addr) in_dev_hold(in_dev); im->multiaddr = addr; /* initial mode is (EX, empty) */ - im->sfmode = MCAST_EXCLUDE; - im->sfcount[MCAST_EXCLUDE] = 1; + im->sfmode = mode; + im->sfcount[mode] = 1; refcount_set(&im->refcnt, 1); spin_lock_init(&im->lock); #ifdef CONFIG_IP_MULTICAST @@ -1426,12 +1432,17 @@ void ip_mc_inc_group(struct in_device *in_dev, __be32 addr) #ifdef CONFIG_IP_MULTICAST igmpv3_del_delrec(in_dev, im); #endif - igmp_group_added(im); + igmp_group_added(im, mode); if (!in_dev->dead) ip_rt_multicast_event(in_dev); out: return; } + +void ip_mc_inc_group(struct in_device *in_dev, __be32 addr) +{ + __ip_mc_inc_group(in_dev, addr, MCAST_EXCLUDE); +} EXPORT_SYMBOL(ip_mc_inc_group); static int ip_mc_check_iphdr(struct sk_buff *skb) @@ -1688,7 +1699,7 @@ void ip_mc_remap(struct in_device *in_dev) #ifdef CONFIG_IP_MULTICAST igmpv3_del_delrec(in_dev, pmc); #endif - igmp_group_added(pmc); + igmp_group_added(pmc, pmc->sfmode); } } @@ -1751,7 +1762,7 @@ void ip_mc_up(struct in_device *in_dev) #ifdef CONFIG_IP_MULTICAST igmpv3_del_delrec(in_dev, pmc); #endif - igmp_group_added(pmc); + igmp_group_added(pmc, pmc->sfmode); } } @@ -2130,8 +2141,8 @@ static void ip_mc_clear_src(struct ip_mc_list *pmc) /* Join a multicast group */ - -int ip_mc_join_group(struct sock *sk, struct ip_mreqn *imr) +static int __ip_mc_join_group(struct sock *sk, struct ip_mreqn *imr, + unsigned int mode) { __be32 addr = imr->imr_multiaddr.s_addr; struct ip_mc_socklist *iml, *i; @@ -2172,15 +2183,30 @@ int ip_mc_join_group(struct sock *sk, struct ip_mreqn *imr) memcpy(&iml->multi, imr, sizeof(*imr)); iml->next_rcu = inet->mc_list; iml->sflist = NULL; - iml->sfmode = MCAST_EXCLUDE; + iml->sfmode = mode; rcu_assign_pointer(inet->mc_list, iml); - ip_mc_inc_group(in_dev, addr); + __ip_mc_inc_group(in_dev, addr, mode); err = 0; done: return err; } + +/* Join ASM (Any-Source Multicast) group + */ +int ip_mc_join_group(struct sock *sk, struct ip_mreqn *imr) +{ + return __ip_mc_join_group(sk, imr, MCAST_EXCLUDE); +} EXPORT_SYMBOL(ip_mc_join_group); +/* Join SSM (Source-Specific Multicast) group + */ +int ip_mc_join_group_ssm(struct sock *sk, struct ip_mreqn *imr, + unsigned int mode) +{ + return __ip_mc_join_group(sk, imr, mode); +} + static int ip_mc_leave_src(struct sock *sk, struct ip_mc_socklist *iml, struct in_device *in_dev) { diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c index fc32fdbeefa6..64c76dcf7386 100644 --- a/net/ipv4/ip_sockglue.c +++ b/net/ipv4/ip_sockglue.c @@ -984,7 +984,7 @@ static int do_ip_setsockopt(struct sock *sk, int level, mreq.imr_multiaddr.s_addr = mreqs.imr_multiaddr; mreq.imr_address.s_addr = mreqs.imr_interface; mreq.imr_ifindex = 0; - err = ip_mc_join_group(sk, &mreq); + err = ip_mc_join_group_ssm(sk, &mreq, MCAST_INCLUDE); if (err && err != -EADDRINUSE) break; omode = MCAST_INCLUDE; @@ -1061,7 +1061,7 @@ static int do_ip_setsockopt(struct sock *sk, int level, mreq.imr_multiaddr = psin->sin_addr; mreq.imr_address.s_addr = 0; mreq.imr_ifindex = greqs.gsr_interface; - err = ip_mc_join_group(sk, &mreq); + err = ip_mc_join_group_ssm(sk, &mreq, MCAST_INCLUDE); if (err && err != -EADDRINUSE) break; greqs.gsr_interface = mreq.imr_ifindex; -- cgit v1.2.3 From c7ea20c9da5b94e400c8dcc0adb99411f2e430a6 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Tue, 10 Jul 2018 22:41:27 +0800 Subject: ipv6/mcast: init as INCLUDE when join SSM INCLUDE group This an IPv6 version patch of "ipv4/igmp: init group mode as INCLUDE when join source group". From RFC3810, part 6.1: If no per-interface state existed for that multicast address before the change (i.e., the change consisted of creating a new per-interface record), or if no state exists after the change (i.e., the change consisted of deleting a per-interface record), then the "non-existent" state is considered to have an INCLUDE filter mode and an empty source list. Which means a new multicast group should start with state IN(). Currently, for MLDv2 SSM JOIN_SOURCE_GROUP mode, we first call ipv6_sock_mc_join(), then ip6_mc_source(), which will trigger a TO_IN() message instead of ALLOW(). The issue was exposed by commit a052517a8ff65 ("net/multicast: should not send source list records when have filter mode change"). Before this change, we sent both ALLOW(A) and TO_IN(A). Now, we only send TO_IN(A). Fix it by adding a new parameter to init group mode. Also add some wrapper functions to avoid changing too much code. v1 -> v2: In the first version I only cleared the group change record. But this is not enough. Because when a new group join, it will init as EXCLUDE and trigger a filter mode change in ip/ip6_mc_add_src(), which will clear all source addresses sf_crcount. This will prevent early joined address sending state change records if multi source addressed joined at the same time. In v2 patch, I fixed it by directly initializing the mode to INCLUDE for SSM JOIN_SOURCE_GROUP. I also split the original patch into two separated patches for IPv4 and IPv6. There is also a difference between v4 and v6 version. For IPv6, when the interface goes down and up, we will send correct state change record with unspecified IPv6 address (::) with function ipv6_mc_up(). But after DAD is completed, we resend the change record TO_IN() in mld_send_initial_cr(). Fix it by sending ALLOW() for INCLUDE mode in mld_send_initial_cr(). Fixes: a052517a8ff65 ("net/multicast: should not send source list records when have filter mode change") Reviewed-by: Stefano Brivio Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller --- include/net/ipv6.h | 2 ++ net/ipv6/ipv6_sockglue.c | 5 ++-- net/ipv6/mcast.c | 64 ++++++++++++++++++++++++++++++++++-------------- 3 files changed, 50 insertions(+), 21 deletions(-) diff --git a/include/net/ipv6.h b/include/net/ipv6.h index d02881e4ad1f..7528632bcf2a 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -1100,6 +1100,8 @@ void ipv6_sysctl_unregister(void); int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr); +int ipv6_sock_mc_join_ssm(struct sock *sk, int ifindex, + const struct in6_addr *addr, unsigned int mode); int ipv6_sock_mc_drop(struct sock *sk, int ifindex, const struct in6_addr *addr); #endif /* _NET_IPV6_H */ diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index c95c3486d904..568ca4187cd1 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -729,8 +729,9 @@ done: struct sockaddr_in6 *psin6; psin6 = (struct sockaddr_in6 *)&greqs.gsr_group; - retv = ipv6_sock_mc_join(sk, greqs.gsr_interface, - &psin6->sin6_addr); + retv = ipv6_sock_mc_join_ssm(sk, greqs.gsr_interface, + &psin6->sin6_addr, + MCAST_INCLUDE); /* prior join w/ different source is ok */ if (retv && retv != -EADDRINUSE) break; diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index c0c74088f2af..2699be7202be 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -95,6 +95,8 @@ static int ip6_mc_add_src(struct inet6_dev *idev, const struct in6_addr *pmca, int delta); static int ip6_mc_leave_src(struct sock *sk, struct ipv6_mc_socklist *iml, struct inet6_dev *idev); +static int __ipv6_dev_mc_inc(struct net_device *dev, + const struct in6_addr *addr, unsigned int mode); #define MLD_QRV_DEFAULT 2 /* RFC3810, 9.2. Query Interval */ @@ -132,7 +134,8 @@ static int unsolicited_report_interval(struct inet6_dev *idev) return iv > 0 ? iv : 1; } -int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr) +static int __ipv6_sock_mc_join(struct sock *sk, int ifindex, + const struct in6_addr *addr, unsigned int mode) { struct net_device *dev = NULL; struct ipv6_mc_socklist *mc_lst; @@ -179,7 +182,7 @@ int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr) } mc_lst->ifindex = dev->ifindex; - mc_lst->sfmode = MCAST_EXCLUDE; + mc_lst->sfmode = mode; rwlock_init(&mc_lst->sflock); mc_lst->sflist = NULL; @@ -187,7 +190,7 @@ int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr) * now add/increase the group membership on the device */ - err = ipv6_dev_mc_inc(dev, addr); + err = __ipv6_dev_mc_inc(dev, addr, mode); if (err) { sock_kfree_s(sk, mc_lst, sizeof(*mc_lst)); @@ -199,8 +202,19 @@ int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr) return 0; } + +int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr) +{ + return __ipv6_sock_mc_join(sk, ifindex, addr, MCAST_EXCLUDE); +} EXPORT_SYMBOL(ipv6_sock_mc_join); +int ipv6_sock_mc_join_ssm(struct sock *sk, int ifindex, + const struct in6_addr *addr, unsigned int mode) +{ + return __ipv6_sock_mc_join(sk, ifindex, addr, mode); +} + /* * socket leave on multicast group */ @@ -646,7 +660,7 @@ bool inet6_mc_check(struct sock *sk, const struct in6_addr *mc_addr, return rv; } -static void igmp6_group_added(struct ifmcaddr6 *mc) +static void igmp6_group_added(struct ifmcaddr6 *mc, unsigned int mode) { struct net_device *dev = mc->idev->dev; char buf[MAX_ADDR_LEN]; @@ -672,7 +686,13 @@ static void igmp6_group_added(struct ifmcaddr6 *mc) } /* else v2 */ - mc->mca_crcount = mc->idev->mc_qrv; + /* Based on RFC3810 6.1, for newly added INCLUDE SSM, we + * should not send filter-mode change record as the mode + * should be from IN() to IN(A). + */ + if (mode == MCAST_EXCLUDE) + mc->mca_crcount = mc->idev->mc_qrv; + mld_ifc_event(mc->idev); } @@ -770,13 +790,14 @@ static void mld_del_delrec(struct inet6_dev *idev, struct ifmcaddr6 *im) spin_lock_bh(&im->mca_lock); if (pmc) { im->idev = pmc->idev; - im->mca_crcount = idev->mc_qrv; im->mca_sfmode = pmc->mca_sfmode; if (pmc->mca_sfmode == MCAST_INCLUDE) { im->mca_tomb = pmc->mca_tomb; im->mca_sources = pmc->mca_sources; for (psf = im->mca_sources; psf; psf = psf->sf_next) - psf->sf_crcount = im->mca_crcount; + psf->sf_crcount = idev->mc_qrv; + } else { + im->mca_crcount = idev->mc_qrv; } in6_dev_put(pmc->idev); kfree(pmc); @@ -831,7 +852,8 @@ static void ma_put(struct ifmcaddr6 *mc) } static struct ifmcaddr6 *mca_alloc(struct inet6_dev *idev, - const struct in6_addr *addr) + const struct in6_addr *addr, + unsigned int mode) { struct ifmcaddr6 *mc; @@ -849,9 +871,8 @@ static struct ifmcaddr6 *mca_alloc(struct inet6_dev *idev, refcount_set(&mc->mca_refcnt, 1); spin_lock_init(&mc->mca_lock); - /* initial mode is (EX, empty) */ - mc->mca_sfmode = MCAST_EXCLUDE; - mc->mca_sfcount[MCAST_EXCLUDE] = 1; + mc->mca_sfmode = mode; + mc->mca_sfcount[mode] = 1; if (ipv6_addr_is_ll_all_nodes(&mc->mca_addr) || IPV6_ADDR_MC_SCOPE(&mc->mca_addr) < IPV6_ADDR_SCOPE_LINKLOCAL) @@ -863,7 +884,8 @@ static struct ifmcaddr6 *mca_alloc(struct inet6_dev *idev, /* * device multicast group inc (add if not found) */ -int ipv6_dev_mc_inc(struct net_device *dev, const struct in6_addr *addr) +static int __ipv6_dev_mc_inc(struct net_device *dev, + const struct in6_addr *addr, unsigned int mode) { struct ifmcaddr6 *mc; struct inet6_dev *idev; @@ -887,14 +909,13 @@ int ipv6_dev_mc_inc(struct net_device *dev, const struct in6_addr *addr) if (ipv6_addr_equal(&mc->mca_addr, addr)) { mc->mca_users++; write_unlock_bh(&idev->lock); - ip6_mc_add_src(idev, &mc->mca_addr, MCAST_EXCLUDE, 0, - NULL, 0); + ip6_mc_add_src(idev, &mc->mca_addr, mode, 0, NULL, 0); in6_dev_put(idev); return 0; } } - mc = mca_alloc(idev, addr); + mc = mca_alloc(idev, addr, mode); if (!mc) { write_unlock_bh(&idev->lock); in6_dev_put(idev); @@ -911,11 +932,16 @@ int ipv6_dev_mc_inc(struct net_device *dev, const struct in6_addr *addr) write_unlock_bh(&idev->lock); mld_del_delrec(idev, mc); - igmp6_group_added(mc); + igmp6_group_added(mc, mode); ma_put(mc); return 0; } +int ipv6_dev_mc_inc(struct net_device *dev, const struct in6_addr *addr) +{ + return __ipv6_dev_mc_inc(dev, addr, MCAST_EXCLUDE); +} + /* * device multicast group del */ @@ -1751,7 +1777,7 @@ static struct sk_buff *add_grec(struct sk_buff *skb, struct ifmcaddr6 *pmc, psf_next = psf->sf_next; - if (!is_in(pmc, psf, type, gdeleted, sdeleted)) { + if (!is_in(pmc, psf, type, gdeleted, sdeleted) && !crsend) { psf_prev = psf; continue; } @@ -2066,7 +2092,7 @@ static void mld_send_initial_cr(struct inet6_dev *idev) if (pmc->mca_sfcount[MCAST_EXCLUDE]) type = MLD2_CHANGE_TO_EXCLUDE; else - type = MLD2_CHANGE_TO_INCLUDE; + type = MLD2_ALLOW_NEW_SOURCES; skb = add_grec(skb, pmc, type, 0, 0, 1); spin_unlock_bh(&pmc->mca_lock); } @@ -2546,7 +2572,7 @@ void ipv6_mc_up(struct inet6_dev *idev) ipv6_mc_reset(idev); for (i = idev->mc_list; i; i = i->next) { mld_del_delrec(idev, i); - igmp6_group_added(i); + igmp6_group_added(i, i->mca_sfmode); } read_unlock_bh(&idev->lock); } -- cgit v1.2.3 From c604cb767049b78b3075497b80ebb8fd530ea2cc Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Wed, 11 Jul 2018 10:46:29 -0700 Subject: KEYS: DNS: fix parsing multiple options My recent fix for dns_resolver_preparse() printing very long strings was incomplete, as shown by syzbot which still managed to hit the WARN_ONCE() in set_precision() by adding a crafted "dns_resolver" key: precision 50001 too large WARNING: CPU: 7 PID: 864 at lib/vsprintf.c:2164 vsnprintf+0x48a/0x5a0 The bug this time isn't just a printing bug, but also a logical error when multiple options ("#"-separated strings) are given in the key payload. Specifically, when separating an option string into name and value, if there is no value then the name is incorrectly considered to end at the end of the key payload, rather than the end of the current option. This bypasses validation of the option length, and also means that specifying multiple options is broken -- which presumably has gone unnoticed as there is currently only one valid option anyway. A similar problem also applied to option values, as the kstrtoul() when parsing the "dnserror" option will read past the end of the current option and into the next option. Fix these bugs by correctly computing the length of the option name and by copying the option value, null-terminated, into a temporary buffer. Reproducer for the WARN_ONCE() that syzbot hit: perl -e 'print "#A#", "\0" x 50000' | keyctl padd dns_resolver desc @s Reproducer for "dnserror" option being parsed incorrectly (expected behavior is to fail when seeing the unknown option "foo", actual behavior was to read the dnserror value as "1#foo" and fail there): perl -e 'print "#dnserror=1#foo\0"' | keyctl padd dns_resolver desc @s Reported-by: syzbot Fixes: 4a2d789267e0 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]") Signed-off-by: Eric Biggers Signed-off-by: David S. Miller --- net/dns_resolver/dns_key.c | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-) diff --git a/net/dns_resolver/dns_key.c b/net/dns_resolver/dns_key.c index 40c851693f77..0c9478b91fa5 100644 --- a/net/dns_resolver/dns_key.c +++ b/net/dns_resolver/dns_key.c @@ -86,35 +86,39 @@ dns_resolver_preparse(struct key_preparsed_payload *prep) opt++; kdebug("options: '%s'", opt); do { + int opt_len, opt_nlen; const char *eq; - int opt_len, opt_nlen, opt_vlen, tmp; + char optval[128]; next_opt = memchr(opt, '#', end - opt) ?: end; opt_len = next_opt - opt; - if (opt_len <= 0 || opt_len > 128) { + if (opt_len <= 0 || opt_len > sizeof(optval)) { pr_warn_ratelimited("Invalid option length (%d) for dns_resolver key\n", opt_len); return -EINVAL; } - eq = memchr(opt, '=', opt_len) ?: end; - opt_nlen = eq - opt; - eq++; - opt_vlen = next_opt - eq; /* will be -1 if no value */ + eq = memchr(opt, '=', opt_len); + if (eq) { + opt_nlen = eq - opt; + eq++; + memcpy(optval, eq, next_opt - eq); + optval[next_opt - eq] = '\0'; + } else { + opt_nlen = opt_len; + optval[0] = '\0'; + } - tmp = opt_vlen >= 0 ? opt_vlen : 0; - kdebug("option '%*.*s' val '%*.*s'", - opt_nlen, opt_nlen, opt, tmp, tmp, eq); + kdebug("option '%*.*s' val '%s'", + opt_nlen, opt_nlen, opt, optval); /* see if it's an error number representing a DNS error * that's to be recorded as the result in this key */ if (opt_nlen == sizeof(DNS_ERRORNO_OPTION) - 1 && memcmp(opt, DNS_ERRORNO_OPTION, opt_nlen) == 0) { kdebug("dns error number option"); - if (opt_vlen <= 0) - goto bad_option_value; - ret = kstrtoul(eq, 10, &derrno); + ret = kstrtoul(optval, 10, &derrno); if (ret < 0) goto bad_option_value; -- cgit v1.2.3 From 24d4e34f7a6157f313f7e0985944180e6a7d223d Mon Sep 17 00:00:00 2001 From: Constantine Shulyupin Date: Thu, 12 Jul 2018 08:28:46 +0300 Subject: scripts/tags.sh: Add BPF_CALL Signed-off-by: Constantine Shulyupin Acked-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller --- scripts/tags.sh | 1 + 1 file changed, 1 insertion(+) diff --git a/scripts/tags.sh b/scripts/tags.sh index 66f08bb1cce9..db0d56ebe9b9 100755 --- a/scripts/tags.sh +++ b/scripts/tags.sh @@ -152,6 +152,7 @@ regex_asm=( ) regex_c=( '/^SYSCALL_DEFINE[0-9](\([[:alnum:]_]*\).*/sys_\1/' + '/^BPF_CALL_[0-9](\([[:alnum:]_]*\).*/\1/' '/^COMPAT_SYSCALL_DEFINE[0-9](\([[:alnum:]_]*\).*/compat_sys_\1/' '/^TRACE_EVENT(\([[:alnum:]_]*\).*/trace_\1/' '/^TRACE_EVENT(\([[:alnum:]_]*\).*/trace_\1_rcuidle/' -- cgit v1.2.3 From 32da12216e467dea70a09cd7094c30779ce0f9db Mon Sep 17 00:00:00 2001 From: Dave Watson Date: Thu, 12 Jul 2018 08:03:43 -0700 Subject: tls: Stricter error checking in zerocopy sendmsg path In the zerocopy sendmsg() path, there are error checks to revert the zerocopy if we get any error code. syzkaller has discovered that tls_push_record can return -ECONNRESET, which is fatal, and happens after the point at which it is safe to revert the iter, as we've already passed the memory to do_tcp_sendpages. Previously this code could return -ENOMEM and we would want to revert the iter, but AFAIK this no longer returns ENOMEM after a447da7d004 ("tls: fix waitall behavior in tls_sw_recvmsg"), so we fail for all error codes. Reported-by: syzbot+c226690f7b3126c5ee04@syzkaller.appspotmail.com Reported-by: syzbot+709f2810a6a05f11d4d3@syzkaller.appspotmail.com Signed-off-by: Dave Watson Fixes: 3c4d7559159b ("tls: kernel TLS support") Signed-off-by: David S. Miller --- net/tls/tls_sw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index 7818011fd250..4618f1c31137 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -440,7 +440,7 @@ alloc_encrypted: ret = tls_push_record(sk, msg->msg_flags, record_type); if (!ret) continue; - if (ret == -EAGAIN) + if (ret < 0) goto send_end; copied -= try_to_copy; -- cgit v1.2.3 From 9f80a0723bf0401da63b75709a0e3f31cd4b9446 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Fri, 13 Jul 2018 01:05:17 +0900 Subject: bonding: Fix a typo in bonding.txt This patch fixes a spelling typo in bonding.txt Signed-off-by: Masanari Iida Signed-off-by: David S. Miller --- Documentation/networking/bonding.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index c13214d073a4..d3e5dd26db12 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -1490,7 +1490,7 @@ To remove an ARP target: To configure the interval between learning packet transmits: # echo 12 > /sys/class/net/bond0/bonding/lp_interval - NOTE: the lp_inteval is the number of seconds between instances where + NOTE: the lp_interval is the number of seconds between instances where the bonding driver sends learning packets to each slaves peer switch. The default interval is 1 second. -- cgit v1.2.3 From 6e8cfd6d9d8049e2fd5b2de8a328519dc58ea1e6 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Fri, 13 Jul 2018 13:24:38 +0900 Subject: tun: Fix use-after-free on XDP_TX On XDP_TX we need to free up the frame only when tun_xdp_tx() returns a negative value. A positive value indicates that the packet is successfully enqueued to the ptr_ring, so freeing the page causes use-after-free. Fixes: 735fc4054b3a ("xdp: change ndo_xdp_xmit API to support bulking") Signed-off-by: Toshiaki Makita Acked-by: Jason Wang Acked-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- drivers/net/tun.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index a192a017cc68..f5727baac84a 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1688,7 +1688,7 @@ static struct sk_buff *tun_build_skb(struct tun_struct *tun, case XDP_TX: get_page(alloc_frag->page); alloc_frag->offset += buflen; - if (tun_xdp_tx(tun->dev, &xdp)) + if (tun_xdp_tx(tun->dev, &xdp) < 0) goto err_redirect; rcu_read_unlock(); local_bh_enable(); -- cgit v1.2.3 From b7ed879425be371905d856410d19e9a42a62bcf3 Mon Sep 17 00:00:00 2001 From: Prashant Bhole Date: Fri, 13 Jul 2018 14:40:50 +0900 Subject: net: ip6_gre: get ipv6hdr after skb_cow_head() A KASAN:use-after-free bug was found related to ip6-erspan while running selftests/net/ip6_gre_headroom.sh It happens because of following sequence: - ipv6hdr pointer is obtained from skb - skb_cow_head() is called, skb->head memory is reallocated - old data is accessed using ipv6hdr pointer skb_cow_head() call was added in e41c7c68ea77 ("ip6erspan: make sure enough headroom at xmit."), but looking at the history there was a chance of similar bug because gre_handle_offloads() and pskb_trim() can also reallocate skb->head memory. Fixes tag points to commit which introduced possibility of this bug. This patch moves ipv6hdr pointer assignment after skb_cow_head() call. Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by: Prashant Bhole Reviewed-by: Greg Rose Acked-by: William Tu Signed-off-by: David S. Miller --- net/ipv6/ip6_gre.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index c8cf2fdbb13b..cd2cfb04e5d8 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -927,7 +927,6 @@ tx_err: static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb, struct net_device *dev) { - struct ipv6hdr *ipv6h = ipv6_hdr(skb); struct ip6_tnl *t = netdev_priv(dev); struct dst_entry *dst = skb_dst(skb); struct net_device_stats *stats; @@ -1010,6 +1009,8 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb, goto tx_err; } } else { + struct ipv6hdr *ipv6h = ipv6_hdr(skb); + switch (skb->protocol) { case htons(ETH_P_IP): memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt)); -- cgit v1.2.3 From 56c266dcfa0c3290d73b1fd5dc736aaa7d23e3ef Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Fri, 13 Jul 2018 11:48:42 +0000 Subject: net: stmmac: dwmac-sun8i: fix typo descrive => describe This patch fix a typo in the word Describe Signed-off-by: Corentin Labbe Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c index 2e6e2a96b4f2..f9a61f90cfbc 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c @@ -37,7 +37,7 @@ * is done in the "stmmac files" */ -/* struct emac_variant - Descrive dwmac-sun8i hardware variant +/* struct emac_variant - Describe dwmac-sun8i hardware variant * @default_syscon_value: The default value of the EMAC register in syscon * This value is used for disabling properly EMAC * and used as a good starting value in case of the -- cgit v1.2.3 From 014dd7684e75730fa8d25bc7583534db141e5ded Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Fri, 13 Jul 2018 11:50:15 +0000 Subject: net: ethernet: stmmac: fix documentation warning This patch remove the following documentation warning drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:103: warning: Excess function parameter 'priv' description in 'stmmac_axi_setup' It was introduced in commit afea03656add7 ("stmmac: rework DMA bus setting and introduce new platform AXI structure") Signed-off-by: Corentin Labbe Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 6d141f3931eb..72da77b94ecd 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -94,7 +94,6 @@ static int dwmac1000_validate_ucast_entries(int ucast_entries) /** * stmmac_axi_setup - parse DT parameters for programming the AXI register * @pdev: platform device - * @priv: driver private struct. * Description: * if required, from device-tree the AXI internal register can be tuned * by using platform parameters. -- cgit v1.2.3 From e66515999b627368892ccc9b3a13a506f2ea1357 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 13 Jul 2018 17:21:42 +0200 Subject: ipv6: make DAD fail with enhanced DAD when nonce length differs Commit adc176c54722 ("ipv6 addrconf: Implemented enhanced DAD (RFC7527)") added enhanced DAD with a nonce length of 6 bytes. However, RFC7527 doesn't specify the length of the nonce, other than being 6 + 8*k bytes, with integer k >= 0 (RFC3971 5.3.2). The current implementation simply assumes that the nonce will always be 6 bytes, but others systems are free to choose different sizes. If another system sends a nonce of different length but with the same 6 bytes prefix, it shouldn't be considered as the same nonce. Thus, check that the length of the received nonce is the same as the length we sent. Ugly scapy test script running on veth0: def loop(): pkt=sniff(iface="veth0", filter="icmp6", count=1) pkt = pkt[0] b = bytearray(pkt[Raw].load) b[1] += 1 b += b'\xde\xad\xbe\xef\xde\xad\xbe\xef' pkt[Raw].load = bytes(b) pkt[IPv6].plen += 8 # fixup checksum after modifying the payload pkt[IPv6].payload.cksum -= 0x3b44 if pkt[IPv6].payload.cksum < 0: pkt[IPv6].payload.cksum += 0xffff sendp(pkt, iface="veth0") This should result in DAD failure for any address added to veth0's peer, but is currently ignored. Fixes: adc176c54722 ("ipv6 addrconf: Implemented enhanced DAD (RFC7527)") Signed-off-by: Sabrina Dubroca Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller --- net/ipv6/ndisc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index e640d2f3c55c..0ec273997d1d 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -811,7 +811,7 @@ static void ndisc_recv_ns(struct sk_buff *skb) return; } } - if (ndopts.nd_opts_nonce) + if (ndopts.nd_opts_nonce && ndopts.nd_opts_nonce->nd_opt_len == 1) memcpy(&nonce, (u8 *)(ndopts.nd_opts_nonce + 1), 6); inc = ipv6_addr_is_multicast(daddr); -- cgit v1.2.3 From 2d14d3795294d42aacc278948984a480569bcc23 Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Fri, 13 Jul 2018 12:03:32 -0500 Subject: ibmvnic: Revise RX/TX queue error messages During a device failover, there may be latency between the loss of the current backing device and a notification from firmware that a failover has occurred. This latency can result in a large amount of error printouts as firmware returns outgoing traffic with a generic error code. These are not necessarily errors in this case as the firmware is busy swapping in a new backing adapter and is not ready to send packets yet. This patch reclassifies those error codes as warnings with an explanation that a failover may be pending. All other return codes will be considered errors. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 39 ++++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index d0e196bff081..c50963680f30 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -329,7 +329,8 @@ static void replenish_rx_pool(struct ibmvnic_adapter *adapter, return; failure: - dev_info(dev, "replenish pools failure\n"); + if (lpar_rc != H_PARAMETER && lpar_rc != H_CLOSED) + dev_err_ratelimited(dev, "rx: replenish packet buffer failed\n"); pool->free_map[pool->next_free] = index; pool->rx_buff[index].skb = NULL; @@ -1617,7 +1618,8 @@ static int ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev) &tx_crq); } if (lpar_rc != H_SUCCESS) { - dev_err(dev, "tx failed with code %ld\n", lpar_rc); + if (lpar_rc != H_CLOSED && lpar_rc != H_PARAMETER) + dev_err_ratelimited(dev, "tx: send failed\n"); dev_kfree_skb_any(skb); tx_buff->skb = NULL; @@ -3204,6 +3206,25 @@ static union ibmvnic_crq *ibmvnic_next_crq(struct ibmvnic_adapter *adapter) return crq; } +static void print_subcrq_error(struct device *dev, int rc, const char *func) +{ + switch (rc) { + case H_PARAMETER: + dev_warn_ratelimited(dev, + "%s failed: Send request is malformed or adapter failover pending. (rc=%d)\n", + func, rc); + break; + case H_CLOSED: + dev_warn_ratelimited(dev, + "%s failed: Backing queue closed. Adapter is down or failover pending. (rc=%d)\n", + func, rc); + break; + default: + dev_err_ratelimited(dev, "%s failed: (rc=%d)\n", func, rc); + break; + } +} + static int send_subcrq(struct ibmvnic_adapter *adapter, u64 remote_handle, union sub_crq *sub_crq) { @@ -3230,11 +3251,8 @@ static int send_subcrq(struct ibmvnic_adapter *adapter, u64 remote_handle, cpu_to_be64(u64_crq[2]), cpu_to_be64(u64_crq[3])); - if (rc) { - if (rc == H_CLOSED) - dev_warn(dev, "CRQ Queue closed\n"); - dev_err(dev, "Send error (rc=%d)\n", rc); - } + if (rc) + print_subcrq_error(dev, rc, __func__); return rc; } @@ -3252,11 +3270,8 @@ static int send_subcrq_indirect(struct ibmvnic_adapter *adapter, cpu_to_be64(remote_handle), ioba, num_entries); - if (rc) { - if (rc == H_CLOSED) - dev_warn(dev, "CRQ Queue closed\n"); - dev_err(dev, "Send (indirect) error (rc=%d)\n", rc); - } + if (rc) + print_subcrq_error(dev, rc, __func__); return rc; } -- cgit v1.2.3 From 916c5e1413be058d1c1f6e502db350df890730ce Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 13 Jul 2018 10:38:38 -0700 Subject: hv/netvsc: fix handling of fallback to single queue mode The netvsc device may need to fallback to running in single queue mode if host side only wants to support single queue. Recent change for handling mtu broke this in setup logic. Reported-by: Dan Carpenter Fixes: 3ffe64f1a641 ("hv_netvsc: split sub-channel setup into async and sync") Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/hyperv/rndis_filter.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c index 9b4e3c3787e5..408ece27131c 100644 --- a/drivers/net/hyperv/rndis_filter.c +++ b/drivers/net/hyperv/rndis_filter.c @@ -1338,6 +1338,7 @@ out: /* setting up multiple channels failed */ net_device->max_chn = 1; net_device->num_chn = 1; + return 0; err_dev_remv: rndis_filter_device_remove(dev, net_device); -- cgit v1.2.3 From c133459765fae249ba482f62e12f987aec4376f0 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 13 Jul 2018 21:25:19 -0700 Subject: net/ethernet/freescale/fman: fix cross-build error CC [M] drivers/net/ethernet/freescale/fman/fman.o In file included from ../drivers/net/ethernet/freescale/fman/fman.c:35: ../include/linux/fsl/guts.h: In function 'guts_set_dmacr': ../include/linux/fsl/guts.h:165:2: error: implicit declaration of function 'clrsetbits_be32' [-Werror=implicit-function-declaration] clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift); ^~~~~~~~~~~~~~~ Signed-off-by: Randy Dunlap Cc: Madalin Bucur Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: David S. Miller --- include/linux/fsl/guts.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/fsl/guts.h b/include/linux/fsl/guts.h index 3efa3b861d44..941b11811f85 100644 --- a/include/linux/fsl/guts.h +++ b/include/linux/fsl/guts.h @@ -16,6 +16,7 @@ #define __FSL_GUTS_H__ #include +#include /** * Global Utility Registers. -- cgit v1.2.3 From 432e629e56432064761be63bcd5e263c0920430d Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Sun, 15 Jul 2018 13:54:39 +0300 Subject: net/mlx4_en: Don't reuse RX page when XDP is set When a new rx packet arrives, the rx path will decide whether to reuse the remainder of the page or not according to one of the below conditions: 1. frag_info->frag_stride == PAGE_SIZE / 2 2. frags->page_offset + frag_info->frag_size > PAGE_SIZE; The first condition is no met for when XDP is set. For XDP, page_offset is always set to priv->rx_headroom which is XDP_PACKET_HEADROOM and frag_info->frag_size is around mtu size + some padding, still the 2nd release condition will hold since XDP_PACKET_HEADROOM + 1536 < PAGE_SIZE, as a result the page will not be released and will be _wrongly_ reused for next free rx descriptor. In XDP there is an assumption to have a page per packet and reuse can break such assumption and might cause packet data corruptions. Fix this by adding an extra condition (!priv->rx_headroom) to the 2nd case to avoid page reuse when XDP is set, since rx_headroom is set to 0 for non XDP setup and set to XDP_PACKET_HEADROOM for XDP setup. No additional cache line is required for the new condition. Fixes: 34db548bfb95 ("mlx4: add page recycling in receive path") Signed-off-by: Saeed Mahameed Signed-off-by: Tariq Toukan Suggested-by: Martin KaFai Lau CC: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index 9f54ccbddea7..3360f7b9ee73 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -474,10 +474,10 @@ static int mlx4_en_complete_rx_desc(struct mlx4_en_priv *priv, { const struct mlx4_en_frag_info *frag_info = priv->frag_info; unsigned int truesize = 0; + bool release = true; int nr, frag_size; struct page *page; dma_addr_t dma; - bool release; /* Collect used fragments while replacing them in the HW descriptors */ for (nr = 0;; frags++) { @@ -500,7 +500,11 @@ static int mlx4_en_complete_rx_desc(struct mlx4_en_priv *priv, release = page_count(page) != 1 || page_is_pfmemalloc(page) || page_to_nid(page) != numa_mem_id(); - } else { + } else if (!priv->rx_headroom) { + /* rx_headroom for non XDP setup is always 0. + * When XDP is set, the above condition will + * guarantee page is always released. + */ u32 sz_align = ALIGN(frag_size, SMP_CACHE_BYTES); frags->page_offset += sz_align; -- cgit v1.2.3 From 31048d7aedf31bf0f69c54a662944632f29d82f2 Mon Sep 17 00:00:00 2001 From: Stefan Baranoff Date: Sun, 15 Jul 2018 11:36:37 -0400 Subject: tcp: Fix broken repair socket window probe patch Correct previous bad attempt at allowing sockets to come out of TCP repair without sending window probes. To avoid changing size of the repair variable in struct tcp_sock, this lets the decision for sending probes or not to be made when coming out of repair by introducing two ways to turn it off. v2: * Remove erroneous comment; defines now make behavior clear Fixes: 70b7ff130224 ("tcp: allow user to create repair socket without window probes") Signed-off-by: Stefan Baranoff Signed-off-by: Eric Dumazet Acked-by: Andrei Vagin Signed-off-by: David S. Miller --- include/uapi/linux/tcp.h | 4 ++++ net/ipv4/tcp.c | 13 +++++++------ 2 files changed, 11 insertions(+), 6 deletions(-) diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index 29eb659aa77a..e3f6ed8a7064 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -127,6 +127,10 @@ enum { #define TCP_CM_INQ TCP_INQ +#define TCP_REPAIR_ON 1 +#define TCP_REPAIR_OFF 0 +#define TCP_REPAIR_OFF_NO_WP -1 /* Turn off without window probes */ + struct tcp_repair_opt { __u32 opt_code; __u32 opt_val; diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 8e5e2ca9ab1b..ec2186e3087f 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2823,16 +2823,17 @@ static int do_tcp_setsockopt(struct sock *sk, int level, case TCP_REPAIR: if (!tcp_can_repair_sock(sk)) err = -EPERM; - /* 1 for normal repair, 2 for no window probes */ - else if (val == 1 || val == 2) { - tp->repair = val; + else if (val == TCP_REPAIR_ON) { + tp->repair = 1; sk->sk_reuse = SK_FORCE_REUSE; tp->repair_queue = TCP_NO_QUEUE; - } else if (val == 0) { + } else if (val == TCP_REPAIR_OFF) { + tp->repair = 0; + sk->sk_reuse = SK_NO_REUSE; + tcp_send_window_probe(sk); + } else if (val == TCP_REPAIR_OFF_NO_WP) { tp->repair = 0; sk->sk_reuse = SK_NO_REUSE; - if (tp->repair == 1) - tcp_send_window_probe(sk); } else err = -EINVAL; -- cgit v1.2.3 From b5d2d75e079a918be686957b1a8d2f6c5cc95a0a Mon Sep 17 00:00:00 2001 From: David Ahern Date: Sun, 15 Jul 2018 09:35:19 -0700 Subject: net/ipv6: Do not allow device only routes via the multipath API Eric reported that reverting the patch that fixed and simplified IPv6 multipath routes means reverting back to invalid userspace notifications. eg., $ ip -6 route add 2001:db8:1::/64 nexthop dev eth0 nexthop dev eth1 only generates a single notification: 2001:db8:1::/64 dev eth0 metric 1024 pref medium While working on a fix for this problem I found another case that is just broken completely - a multipath route with a gateway followed by device followed by gateway: $ ip -6 ro add 2001:db8:103::/64 nexthop via 2001:db8:1::64 nexthop dev dummy2 nexthop via 2001:db8:3::64 In this case the device only route is dropped completely - no notification to userpsace but no addition to the FIB either: $ ip -6 ro ls 2001:db8:1::/64 dev dummy1 proto kernel metric 256 pref medium 2001:db8:2::/64 dev dummy2 proto kernel metric 256 pref medium 2001:db8:3::/64 dev dummy3 proto kernel metric 256 pref medium 2001:db8:103::/64 metric 1024 nexthop via 2001:db8:1::64 dev dummy1 weight 1 nexthop via 2001:db8:3::64 dev dummy3 weight 1 pref medium fe80::/64 dev dummy1 proto kernel metric 256 pref medium fe80::/64 dev dummy2 proto kernel metric 256 pref medium fe80::/64 dev dummy3 proto kernel metric 256 pref medium Really, IPv6 multipath is just FUBAR'ed beyond repair when it comes to device only routes, so do not allow it all. This change will break any scripts relying on the mpath api for insert, but I don't see any other way to handle the permutations. Besides, since the routes are added to the FIB as standalone (non-multipath) routes the kernel is not doing what the user requested, so it might as well tell the user that. Reported-by: Eric Dumazet Signed-off-by: David Ahern Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/route.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 63f99411f0de..2ce0bd17de4f 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -4388,6 +4388,13 @@ static int ip6_route_multipath_add(struct fib6_config *cfg, rt = NULL; goto cleanup; } + if (!rt6_qualify_for_ecmp(rt)) { + err = -EINVAL; + NL_SET_ERR_MSG(extack, + "Device only routes can not be added for IPv6 using the multipath API."); + fib6_info_release(rt); + goto cleanup; + } rt->fib6_nh.nh_weight = rtnh->rtnh_hops + 1; -- cgit v1.2.3 From dea39aca1d7aef1e2b95b07edeacf04cc8863a2e Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sun, 15 Jul 2018 21:53:20 +0200 Subject: net: lan78xx: Fix race in tx pending skb size calculation The skb size calculation in lan78xx_tx_bh is in race with the start_xmit, which could lead to rare kernel oopses. So protect the whole skb walk with a spin lock. As a benefit we can unlink the skb directly. This patch was tested on Raspberry Pi 3B+ Link: https://github.com/raspberrypi/linux/issues/2608 Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Cc: stable Signed-off-by: Floris Bos Signed-off-by: Stefan Wahren Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 2e4130746c40..ed10d49eb5e0 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -3344,6 +3344,7 @@ static void lan78xx_tx_bh(struct lan78xx_net *dev) pkt_cnt = 0; count = 0; length = 0; + spin_lock_irqsave(&tqp->lock, flags); for (skb = tqp->next; pkt_cnt < tqp->qlen; skb = skb->next) { if (skb_is_gso(skb)) { if (pkt_cnt) { @@ -3352,7 +3353,8 @@ static void lan78xx_tx_bh(struct lan78xx_net *dev) } count = 1; length = skb->len - TX_OVERHEAD; - skb2 = skb_dequeue(tqp); + __skb_unlink(skb, tqp); + spin_unlock_irqrestore(&tqp->lock, flags); goto gso_skb; } @@ -3361,6 +3363,7 @@ static void lan78xx_tx_bh(struct lan78xx_net *dev) skb_totallen = skb->len + roundup(skb_totallen, sizeof(u32)); pkt_cnt++; } + spin_unlock_irqrestore(&tqp->lock, flags); /* copy to a single skb */ skb = alloc_skb(skb_totallen, GFP_ATOMIC); -- cgit v1.2.3 From 3578a7ecb69920efc3885dbd610e98c00dbdf5db Mon Sep 17 00:00:00 2001 From: John Allen Date: Mon, 16 Jul 2018 10:29:30 -0500 Subject: ibmvnic: Fix error recovery on login failure Testing has uncovered a failure case that is not handled properly. In the event that a login fails and we are not able to recover on the spot, we return 0 from do_reset, preventing any error recovery code from being triggered. Additionally, the state is set to "probed" meaning that when we are able to trigger the error recovery, the driver always comes up in the probed state. To handle the case properly, we need to return a failure code here and set the adapter state to the state that we entered the reset in indicating the state that we would like to come out of the recovery reset in. Signed-off-by: John Allen Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index c50963680f30..ffe7acbeaa22 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1827,8 +1827,8 @@ static int do_reset(struct ibmvnic_adapter *adapter, rc = ibmvnic_login(netdev); if (rc) { - adapter->state = VNIC_PROBED; - return 0; + adapter->state = reset_state; + return rc; } if (adapter->reset_reason == VNIC_RESET_CHANGE_PARAM || -- cgit v1.2.3 From 0f2605fbafb0c0c05d0d4655114530de972ee8ad Mon Sep 17 00:00:00 2001 From: Siva Reddy Kallam Date: Mon, 16 Jul 2018 11:13:31 +0530 Subject: tg3: Update copyright Signed-off-by: Siva Reddy Kallam Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 4 ++++ drivers/net/ethernet/broadcom/tg3.h | 2 ++ 2 files changed, 6 insertions(+) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 3be87efdc93d..2ee15273ae29 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -6,11 +6,15 @@ * Copyright (C) 2004 Sun Microsystems Inc. * Copyright (C) 2005-2016 Broadcom Corporation. * Copyright (C) 2016-2017 Broadcom Limited. + * Copyright (C) 2018 Broadcom. All Rights Reserved. The term "Broadcom" + * refers to Broadcom Inc. and/or its subsidiaries. * * Firmware is: * Derived from proprietary unpublished source code, * Copyright (C) 2000-2016 Broadcom Corporation. * Copyright (C) 2016-2017 Broadcom Ltd. + * Copyright (C) 2018 Broadcom. All Rights Reserved. The term "Broadcom" + * refers to Broadcom Inc. and/or its subsidiaries. * * Permission is hereby granted for the distribution of this firmware * data in hexadecimal or equivalent format, provided this copyright diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index 1d61aa3efda1..a772a33b685c 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -7,6 +7,8 @@ * Copyright (C) 2004 Sun Microsystems Inc. * Copyright (C) 2007-2016 Broadcom Corporation. * Copyright (C) 2016-2017 Broadcom Limited. + * Copyright (C) 2018 Broadcom. All Rights Reserved. The term "Broadcom" + * refers to Broadcom Inc. and/or its subsidiaries. */ #ifndef _T3_H -- cgit v1.2.3 From 3a498606bb04af603a46ebde8296040b2de350d1 Mon Sep 17 00:00:00 2001 From: Sanjeev Bansal Date: Mon, 16 Jul 2018 11:13:32 +0530 Subject: tg3: Add higher cpu clock for 5762. This patch has fix for TX timeout while running bi-directional traffic with 100 Mbps using 5762. Signed-off-by: Sanjeev Bansal Signed-off-by: Siva Reddy Kallam Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 2ee15273ae29..aa1374d0af93 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -9294,6 +9294,15 @@ static int tg3_chip_reset(struct tg3 *tp) tg3_restore_clk(tp); + /* Increase the core clock speed to fix tx timeout issue for 5762 + * with 100Mbps link speed. + */ + if (tg3_asic_rev(tp) == ASIC_REV_5762) { + val = tr32(TG3_CPMU_CLCK_ORIDE_ENABLE); + tw32(TG3_CPMU_CLCK_ORIDE_ENABLE, val | + TG3_CPMU_MAC_ORIDE_ENABLE); + } + /* Reprobe ASF enable state. */ tg3_flag_clear(tp, ENABLE_ASF); tp->phy_flags &= ~(TG3_PHYFLG_1G_ON_VAUX_OK | -- cgit v1.2.3 From 1992d99882afda6dc17f9d49c06150856a91282f Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Mon, 16 Jul 2018 13:56:52 +0200 Subject: net/smc: take sock lock in smc_ioctl() SMC ioctl processing requires the sock lock to work properly in all thinkable scenarios. Problem has been found with RaceFuzzer and fixes: KASAN: null-ptr-deref Read in smc_ioctl Reported-by: Byoungyoung Lee Reported-by: syzbot+35b2c5aa76fd398b9fd4@syzkaller.appspotmail.com Signed-off-by: Ursula Braun Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller --- net/smc/af_smc.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index 5334157f5065..c12a7fc18f56 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -1524,10 +1524,13 @@ static int smc_ioctl(struct socket *sock, unsigned int cmd, return -EBADF; return smc->clcsock->ops->ioctl(smc->clcsock, cmd, arg); } + lock_sock(&smc->sk); switch (cmd) { case SIOCINQ: /* same as FIONREAD */ - if (smc->sk.sk_state == SMC_LISTEN) + if (smc->sk.sk_state == SMC_LISTEN) { + release_sock(&smc->sk); return -EINVAL; + } if (smc->sk.sk_state == SMC_INIT || smc->sk.sk_state == SMC_CLOSED) answ = 0; @@ -1536,8 +1539,10 @@ static int smc_ioctl(struct socket *sock, unsigned int cmd, break; case SIOCOUTQ: /* output queue size (not send + not acked) */ - if (smc->sk.sk_state == SMC_LISTEN) + if (smc->sk.sk_state == SMC_LISTEN) { + release_sock(&smc->sk); return -EINVAL; + } if (smc->sk.sk_state == SMC_INIT || smc->sk.sk_state == SMC_CLOSED) answ = 0; @@ -1547,8 +1552,10 @@ static int smc_ioctl(struct socket *sock, unsigned int cmd, break; case SIOCOUTQNSD: /* output queue size (not send only) */ - if (smc->sk.sk_state == SMC_LISTEN) + if (smc->sk.sk_state == SMC_LISTEN) { + release_sock(&smc->sk); return -EINVAL; + } if (smc->sk.sk_state == SMC_INIT || smc->sk.sk_state == SMC_CLOSED) answ = 0; @@ -1556,8 +1563,10 @@ static int smc_ioctl(struct socket *sock, unsigned int cmd, answ = smc_tx_prepared_sends(&smc->conn); break; case SIOCATMARK: - if (smc->sk.sk_state == SMC_LISTEN) + if (smc->sk.sk_state == SMC_LISTEN) { + release_sock(&smc->sk); return -EINVAL; + } if (smc->sk.sk_state == SMC_INIT || smc->sk.sk_state == SMC_CLOSED) { answ = 0; @@ -1573,8 +1582,10 @@ static int smc_ioctl(struct socket *sock, unsigned int cmd, } break; default: + release_sock(&smc->sk); return -ENOIOCTLCMD; } + release_sock(&smc->sk); return put_user(answ, (int __user *)arg); } -- cgit v1.2.3 From d3f6daede246038cf2ea38b78d732f9dd8feb1d6 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Mon, 16 Jul 2018 09:10:48 +0200 Subject: ARM: dts: omap4-droid4: fix dts w.r.t. pwm pwm node should not be under gpio6 node in the device tree. This fixes detection of the pwm on Droid 4. Fixes: 6d7bdd328da4 ("ARM: dts: omap4-droid4: update touchscreen") Signed-off-by: Pavel Machek Reviewed-by: Sebastian Reichel [tony@atomide.com: added fixes tag] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-droid4-xt894.dts | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index bdf73cbcec3a..e7c3c563ff8f 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -159,13 +159,7 @@ dais = <&mcbsp2_port>, <&mcbsp3_port>; }; -}; - -&dss { - status = "okay"; -}; -&gpio6 { pwm8: dmtimer-pwm-8 { pinctrl-names = "default"; pinctrl-0 = <&vibrator_direction_pin>; @@ -192,7 +186,10 @@ pwm-names = "enable", "direction"; direction-duty-cycle-ns = <10000000>; }; +}; +&dss { + status = "okay"; }; &dsi1 { -- cgit v1.2.3 From 941d810725ad48cc21948f4cff8cf70fa2a67cf9 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Mon, 16 Jul 2018 23:52:14 +1000 Subject: powerpc/xmon: Fix disassembly since printf changes The recent change to add printf annotations to xmon inadvertently made the disassembly output ugly, eg: c00000002001e058 7ee00026 mfcr r23 c00000002001e05c fffffffffae101a0 std r23,416(r1) c00000002001e060 fffffffff8230000 std r1,0(r3) The problem being that negative 32-bit values are being displayed in full 64-bits. The printf conversion was actually correct, we are passing unsigned long so it should use "lx". But powerpc instructions are only 4 bytes and the code only reads 4 bytes, so inst should really just be unsigned int, and that also fixes the printing to look the way we want: c00000002001e058 7ee00026 mfcr r23 c00000002001e05c fae101a0 std r23,416(r1) c00000002001e060 f8230000 std r1,0(r3) Fixes: e70d8f55268b ("powerpc/xmon: Add __printf annotation to xmon_printf()") Signed-off-by: Michael Ellerman --- arch/powerpc/xmon/xmon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 47166ad2a669..196978733e64 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2734,7 +2734,7 @@ generic_inst_dump(unsigned long adr, long count, int praddr, { int nr, dotted; unsigned long first_adr; - unsigned long inst, last_inst = 0; + unsigned int inst, last_inst = 0; unsigned char val[4]; dotted = 0; @@ -2758,7 +2758,7 @@ generic_inst_dump(unsigned long adr, long count, int praddr, dotted = 0; last_inst = inst; if (praddr) - printf(REG" %.8lx", adr, inst); + printf(REG" %.8x", adr, inst); printf("\t"); dump_func(inst, adr); printf("\n"); -- cgit v1.2.3 From 665d4953cde6d9e75c62a07ec8f4f8fd7d396ade Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Wed, 11 Jul 2018 13:41:21 +0800 Subject: btrfs: scrub: Don't use inode page cache in scrub_handle_errored_block() In commit ac0b4145d662 ("btrfs: scrub: Don't use inode pages for device replace") we removed the branch of copy_nocow_pages() to avoid corruption for compressed nodatasum extents. However above commit only solves the problem in scrub_extent(), if during scrub_pages() we failed to read some pages, sctx->no_io_error_seen will be non-zero and we go to fixup function scrub_handle_errored_block(). In scrub_handle_errored_block(), for sctx without csum (no matter if we're doing replace or scrub) we go to scrub_fixup_nodatasum() routine, which does the similar thing with copy_nocow_pages(), but does it without the extra check in copy_nocow_pages() routine. So for test cases like btrfs/100, where we emulate read errors during replace/scrub, we could corrupt compressed extent data again. This patch will fix it just by avoiding any "optimization" for nodatasum, just falls back to the normal fixup routine by try read from any good copy. This also solves WARN_ON() or dead lock caused by lame backref iteration in scrub_fixup_nodatasum() routine. The deadlock or WARN_ON() won't be triggered before commit ac0b4145d662 ("btrfs: scrub: Don't use inode pages for device replace") since copy_nocow_pages() have better locking and extra check for data extent, and it's already doing the fixup work by try to read data from any good copy, so it won't go scrub_fixup_nodatasum() anyway. This patch disables the faulty code and will be removed completely in a followup patch. Fixes: ac0b4145d662 ("btrfs: scrub: Don't use inode pages for device replace") Signed-off-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/scrub.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index 572306036477..6702896cdb8f 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -1151,11 +1151,6 @@ static int scrub_handle_errored_block(struct scrub_block *sblock_to_check) return ret; } - if (sctx->is_dev_replace && !is_metadata && !have_csum) { - sblocks_for_recheck = NULL; - goto nodatasum_case; - } - /* * read all mirrors one after the other. This includes to * re-read the extent or metadata block that failed (that was @@ -1268,13 +1263,19 @@ static int scrub_handle_errored_block(struct scrub_block *sblock_to_check) goto out; } - if (!is_metadata && !have_csum) { + /* + * NOTE: Even for nodatasum case, it's still possible that it's a + * compressed data extent, thus scrub_fixup_nodatasum(), which write + * inode page cache onto disk, could cause serious data corruption. + * + * So here we could only read from disk, and hope our recovery could + * reach disk before the newer write. + */ + if (0 && !is_metadata && !have_csum) { struct scrub_fixup_nodatasum *fixup_nodatasum; WARN_ON(sctx->is_dev_replace); -nodatasum_case: - /* * !is_metadata and !have_csum, this means that the data * might not be COWed, that it might be modified -- cgit v1.2.3 From cf39a6bc342b980f10f344d88035829638a89a48 Mon Sep 17 00:00:00 2001 From: Scott Bauer Date: Fri, 29 Jun 2018 13:03:28 -0600 Subject: nvme: ensure forward progress during Admin passthru If the controller supports effects and goes down during the passthru admin command we will deadlock during namespace revalidation. [ 363.488275] INFO: task kworker/u16:5:231 blocked for more than 120 seconds. [ 363.488290] Not tainted 4.17.0+ #2 [ 363.488296] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 363.488303] kworker/u16:5 D 0 231 2 0x80000000 [ 363.488331] Workqueue: nvme-reset-wq nvme_reset_work [nvme] [ 363.488338] Call Trace: [ 363.488385] schedule+0x75/0x190 [ 363.488396] rwsem_down_read_failed+0x1c3/0x2f0 [ 363.488481] call_rwsem_down_read_failed+0x14/0x30 [ 363.488504] down_read+0x1d/0x80 [ 363.488523] nvme_stop_queues+0x1e/0xa0 [nvme_core] [ 363.488536] nvme_dev_disable+0xae4/0x1620 [nvme] [ 363.488614] nvme_reset_work+0xd1e/0x49d9 [nvme] [ 363.488911] process_one_work+0x81a/0x1400 [ 363.488934] worker_thread+0x87/0xe80 [ 363.488955] kthread+0x2db/0x390 [ 363.488977] ret_from_fork+0x35/0x40 Fixes: 84fef62d135b6 ("nvme: check admin passthru command effects") Signed-off-by: Scott Bauer Reviewed-by: Keith Busch Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 50 +++++++++++++++++++++++++----------------------- 1 file changed, 26 insertions(+), 24 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 46df030b2c3f..e7668c4bb4dd 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -100,6 +100,22 @@ static struct class *nvme_subsys_class; static void nvme_ns_remove(struct nvme_ns *ns); static int nvme_revalidate_disk(struct gendisk *disk); static void nvme_put_subsystem(struct nvme_subsystem *subsys); +static void nvme_remove_invalid_namespaces(struct nvme_ctrl *ctrl, + unsigned nsid); + +static void nvme_set_queue_dying(struct nvme_ns *ns) +{ + /* + * Revalidating a dead namespace sets capacity to 0. This will end + * buffered writers dirtying pages that can't be synced. + */ + if (!ns->disk || test_and_set_bit(NVME_NS_DEAD, &ns->flags)) + return; + revalidate_disk(ns->disk); + blk_set_queue_dying(ns->queue); + /* Forcibly unquiesce queues to avoid blocking dispatch */ + blk_mq_unquiesce_queue(ns->queue); +} static void nvme_queue_scan(struct nvme_ctrl *ctrl) { @@ -1151,19 +1167,15 @@ static u32 nvme_passthru_start(struct nvme_ctrl *ctrl, struct nvme_ns *ns, static void nvme_update_formats(struct nvme_ctrl *ctrl) { - struct nvme_ns *ns, *next; - LIST_HEAD(rm_list); + struct nvme_ns *ns; - down_write(&ctrl->namespaces_rwsem); - list_for_each_entry(ns, &ctrl->namespaces, list) { - if (ns->disk && nvme_revalidate_disk(ns->disk)) { - list_move_tail(&ns->list, &rm_list); - } - } - up_write(&ctrl->namespaces_rwsem); + down_read(&ctrl->namespaces_rwsem); + list_for_each_entry(ns, &ctrl->namespaces, list) + if (ns->disk && nvme_revalidate_disk(ns->disk)) + nvme_set_queue_dying(ns); + up_read(&ctrl->namespaces_rwsem); - list_for_each_entry_safe(ns, next, &rm_list, list) - nvme_ns_remove(ns); + nvme_remove_invalid_namespaces(ctrl, NVME_NSID_ALL); } static void nvme_passthru_end(struct nvme_ctrl *ctrl, u32 effects) @@ -3138,7 +3150,7 @@ static void nvme_remove_invalid_namespaces(struct nvme_ctrl *ctrl, down_write(&ctrl->namespaces_rwsem); list_for_each_entry_safe(ns, next, &ctrl->namespaces, list) { - if (ns->head->ns_id > nsid) + if (ns->head->ns_id > nsid || test_bit(NVME_NS_DEAD, &ns->flags)) list_move_tail(&ns->list, &rm_list); } up_write(&ctrl->namespaces_rwsem); @@ -3542,19 +3554,9 @@ void nvme_kill_queues(struct nvme_ctrl *ctrl) if (ctrl->admin_q) blk_mq_unquiesce_queue(ctrl->admin_q); - list_for_each_entry(ns, &ctrl->namespaces, list) { - /* - * Revalidating a dead namespace sets capacity to 0. This will - * end buffered writers dirtying pages that can't be synced. - */ - if (!ns->disk || test_and_set_bit(NVME_NS_DEAD, &ns->flags)) - continue; - revalidate_disk(ns->disk); - blk_set_queue_dying(ns->queue); + list_for_each_entry(ns, &ctrl->namespaces, list) + nvme_set_queue_dying(ns); - /* Forcibly unquiesce queues to avoid blocking dispatch */ - blk_mq_unquiesce_queue(ns->queue); - } up_read(&ctrl->namespaces_rwsem); } EXPORT_SYMBOL_GPL(nvme_kill_queues); -- cgit v1.2.3 From fa441b71aa27d06fa79d5e7f7c329981dccd94d1 Mon Sep 17 00:00:00 2001 From: Weiping Zhang Date: Tue, 3 Jul 2018 00:34:38 +0800 Subject: nvme: don't enable AEN if not supported Avoid excuting set_feature command if there is no supported bit in Optional Asynchronous Events Supported (OAES). Fixes: c0561f82 ("nvme: submit AEN event configuration on startup") Reviewed-by: Sagi Grimberg Signed-off-by: Weiping Zhang Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index e7668c4bb4dd..57f33733237f 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1060,14 +1060,17 @@ EXPORT_SYMBOL_GPL(nvme_set_queue_count); static void nvme_enable_aen(struct nvme_ctrl *ctrl) { - u32 result; + u32 result, supported_aens = ctrl->oaes & NVME_AEN_SUPPORTED; int status; - status = nvme_set_features(ctrl, NVME_FEAT_ASYNC_EVENT, - ctrl->oaes & NVME_AEN_SUPPORTED, NULL, 0, &result); + if (!supported_aens) + return; + + status = nvme_set_features(ctrl, NVME_FEAT_ASYNC_EVENT, supported_aens, + NULL, 0, &result); if (status) dev_warn(ctrl->device, "Failed to configure AEN (cfg %x)\n", - ctrl->oaes & NVME_AEN_SUPPORTED); + supported_aens); } static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio) -- cgit v1.2.3 From 39675f7a7c7e7702f7d5341f1e0d01db746543a0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 17 Jul 2018 17:26:43 +0200 Subject: ALSA: rawmidi: Change resized buffers atomically The SNDRV_RAWMIDI_IOCTL_PARAMS ioctl may resize the buffers and the current code is racy. For example, the sequencer client may write to buffer while it being resized. As a simple workaround, let's switch to the resized buffer inside the stream runtime lock. Reported-by: syzbot+52f83f0ea8df16932f7f@syzkaller.appspotmail.com Cc: Signed-off-by: Takashi Iwai --- sound/core/rawmidi.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index 69616d00481c..b53026a72e73 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -635,7 +635,7 @@ static int snd_rawmidi_info_select_user(struct snd_card *card, int snd_rawmidi_output_params(struct snd_rawmidi_substream *substream, struct snd_rawmidi_params * params) { - char *newbuf; + char *newbuf, *oldbuf; struct snd_rawmidi_runtime *runtime = substream->runtime; if (substream->append && substream->use_count > 1) @@ -648,13 +648,17 @@ int snd_rawmidi_output_params(struct snd_rawmidi_substream *substream, return -EINVAL; } if (params->buffer_size != runtime->buffer_size) { - newbuf = krealloc(runtime->buffer, params->buffer_size, - GFP_KERNEL); + newbuf = kmalloc(params->buffer_size, GFP_KERNEL); if (!newbuf) return -ENOMEM; + spin_lock_irq(&runtime->lock); + oldbuf = runtime->buffer; runtime->buffer = newbuf; runtime->buffer_size = params->buffer_size; runtime->avail = runtime->buffer_size; + runtime->appl_ptr = runtime->hw_ptr = 0; + spin_unlock_irq(&runtime->lock); + kfree(oldbuf); } runtime->avail_min = params->avail_min; substream->active_sensing = !params->no_active_sensing; @@ -665,7 +669,7 @@ EXPORT_SYMBOL(snd_rawmidi_output_params); int snd_rawmidi_input_params(struct snd_rawmidi_substream *substream, struct snd_rawmidi_params * params) { - char *newbuf; + char *newbuf, *oldbuf; struct snd_rawmidi_runtime *runtime = substream->runtime; snd_rawmidi_drain_input(substream); @@ -676,12 +680,16 @@ int snd_rawmidi_input_params(struct snd_rawmidi_substream *substream, return -EINVAL; } if (params->buffer_size != runtime->buffer_size) { - newbuf = krealloc(runtime->buffer, params->buffer_size, - GFP_KERNEL); + newbuf = kmalloc(params->buffer_size, GFP_KERNEL); if (!newbuf) return -ENOMEM; + spin_lock_irq(&runtime->lock); + oldbuf = runtime->buffer; runtime->buffer = newbuf; runtime->buffer_size = params->buffer_size; + runtime->appl_ptr = runtime->hw_ptr = 0; + spin_unlock_irq(&runtime->lock); + kfree(oldbuf); } runtime->avail_min = params->avail_min; return 0; -- cgit v1.2.3 From fbdb328c6bae0a7c78d75734a738b66b86dffc96 Mon Sep 17 00:00:00 2001 From: Dewet Thibaut Date: Mon, 16 Jul 2018 10:49:27 +0200 Subject: x86/MCE: Remove min interval polling limitation commit b3b7c4795c ("x86/MCE: Serialize sysfs changes") introduced a min interval limitation when setting the check interval for polled MCEs. However, the logic is that 0 disables polling for corrected MCEs, see Documentation/x86/x86_64/machinecheck. The limitation prevents disabling. Remove this limitation and allow the value 0 to disable polling again. Fixes: b3b7c4795c ("x86/MCE: Serialize sysfs changes") Signed-off-by: Dewet Thibaut Signed-off-by: Alexander Sverdlin [ Massage commit message. ] Signed-off-by: Borislav Petkov Signed-off-by: Thomas Gleixner Cc: Tony Luck Cc: linux-edac Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180716084927.24869-1-alexander.sverdlin@nokia.com --- arch/x86/kernel/cpu/mcheck/mce.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index c102ad51025e..8c50754c09c1 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -2165,9 +2165,6 @@ static ssize_t store_int_with_restart(struct device *s, if (check_interval == old_check_interval) return ret; - if (check_interval < 1) - check_interval = 1; - mutex_lock(&mce_sysfs_mutex); mce_restart(); mutex_unlock(&mce_sysfs_mutex); -- cgit v1.2.3 From 3c53776e29f81719efcf8f7a6e30cdf753bee94d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 8 Jan 2018 11:51:04 -0800 Subject: Mark HI and TASKLET softirq synchronous Way back in 4.9, we committed 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), and ever since we've had small nagging issues with it. For example, we've had: 1ff688209e2e ("watchdog: core: make sure the watchdog_worker is not deferred") 8d5755b3f77b ("watchdog: softdog: fire watchdog even if softirqs do not get to run") 217f69743681 ("net: busy-poll: allow preemption in sk_busy_loop()") all of which worked around some of the effects of that commit. The DVB people have also complained that the commit causes excessive USB URB latencies, which seems to be due to the USB code using tasklets to schedule USB traffic. This seems to be an issue mainly when already living on the edge, but waiting for ksoftirqd to handle it really does seem to cause excessive latencies. Now Hanna Hawa reports that this issue isn't just limited to USB URB and DVB, but also causes timeout problems for the Marvell SoC team: "I'm facing kernel panic issue while running raid 5 on sata disks connected to Macchiatobin (Marvell community board with Armada-8040 SoC with 4 ARMv8 cores of CA72) Raid 5 built with Marvell DMA engine and async_tx mechanism (ASYNC_TX_DMA [=y]); the DMA driver (mv_xor_v2) uses a tasklet to clean the done descriptors from the queue" The latency problem causes a panic: mv_xor_v2 f0400000.xor: dma_sync_wait: timeout! Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for transaction We've discussed simply just reverting the original commit entirely, and also much more involved solutions (with per-softirq threads etc). This patch is intentionally stupid and fairly limited, because the issue still remains, and the other solutions either got sidetracked or had other issues. We should probably also consider the timer softirqs to be synchronous and not be delayed to ksoftirqd (since they were the issue with the earlier watchdog problems), but that should be done as a separate patch. This does only the tasklet cases. Reported-and-tested-by: Hanna Hawa Reported-and-tested-by: Josef Griebichler Reported-by: Mauro Carvalho Chehab Cc: Alan Stern Cc: Greg Kroah-Hartman Cc: Eric Dumazet Cc: Ingo Molnar Signed-off-by: Linus Torvalds --- kernel/softirq.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/kernel/softirq.c b/kernel/softirq.c index 900dcfee542c..75ffc1d1a2e0 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -79,12 +79,16 @@ static void wakeup_softirqd(void) /* * If ksoftirqd is scheduled, we do not want to process pending softirqs - * right now. Let ksoftirqd handle this at its own rate, to get fairness. + * right now. Let ksoftirqd handle this at its own rate, to get fairness, + * unless we're doing some of the synchronous softirqs. */ -static bool ksoftirqd_running(void) +#define SOFTIRQ_NOW_MASK ((1 << HI_SOFTIRQ) | (1 << TASKLET_SOFTIRQ)) +static bool ksoftirqd_running(unsigned long pending) { struct task_struct *tsk = __this_cpu_read(ksoftirqd); + if (pending & SOFTIRQ_NOW_MASK) + return false; return tsk && (tsk->state == TASK_RUNNING); } @@ -328,7 +332,7 @@ asmlinkage __visible void do_softirq(void) pending = local_softirq_pending(); - if (pending && !ksoftirqd_running()) + if (pending && !ksoftirqd_running(pending)) do_softirq_own_stack(); local_irq_restore(flags); @@ -355,7 +359,7 @@ void irq_enter(void) static inline void invoke_softirq(void) { - if (ksoftirqd_running()) + if (ksoftirqd_running(local_softirq_pending())) return; if (!force_irqthreads) { -- cgit v1.2.3 From 96a5d8d4915f3e241ebb48d5decdd110ab9c7dcf Mon Sep 17 00:00:00 2001 From: Leo Liu Date: Fri, 13 Jul 2018 11:26:28 -0400 Subject: drm/amdgpu: Make sure IB tests flushed after IP resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes: 2c773de2 (drm/amdgpu: defer test IBs on the rings at boot (V3)) Signed-off-by: Leo Liu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 6e5284e6c028..2c5f093e79e3 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2747,6 +2747,9 @@ int amdgpu_device_resume(struct drm_device *dev, bool resume, bool fbcon) if (r) return r; + /* Make sure IB tests flushed */ + flush_delayed_work(&adev->late_init_work); + /* blat the mode back in */ if (fbcon) { if (!amdgpu_device_has_dc_support(adev)) { -- cgit v1.2.3 From 263318eea710a6dd9770f9b4f570889b5dfd0d39 Mon Sep 17 00:00:00 2001 From: Hersen Wu Date: Mon, 16 Jul 2018 11:21:12 -0400 Subject: drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo [why] dp hbr2 eye diagram pattern for raven asic is not stabled. workaround is to use tp4 pattern. But this should not be applied to asic before raven. [how] add new bool varilable in asic caps. for raven asic, use the workaround. for carrizo, vega, do not use workaround. Signed-off-by: Hersen Wu Reviewed-by: Harry Wentland Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 8 +++----- drivers/gpu/drm/amd/display/dc/dc.h | 1 + drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c | 2 ++ 3 files changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index 7857cb42b3e6..bdd121485cbc 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -1767,12 +1767,10 @@ static void dp_test_send_link_training(struct dc_link *link) dp_retrain_link_dp_test(link, &link_settings, false); } -/* TODO hbr2 compliance eye output is unstable +/* TODO Raven hbr2 compliance eye output is unstable * (toggling on and off) with debugger break * This caueses intermittent PHY automation failure * Need to look into the root cause */ -static uint8_t force_tps4_for_cp2520 = 1; - static void dp_test_send_phy_test_pattern(struct dc_link *link) { union phy_test_pattern dpcd_test_pattern; @@ -1832,13 +1830,13 @@ static void dp_test_send_phy_test_pattern(struct dc_link *link) break; case PHY_TEST_PATTERN_CP2520_1: /* CP2520 pattern is unstable, temporarily use TPS4 instead */ - test_pattern = (force_tps4_for_cp2520 == 1) ? + test_pattern = (link->dc->caps.force_dp_tps4_for_cp2520 == 1) ? DP_TEST_PATTERN_TRAINING_PATTERN4 : DP_TEST_PATTERN_HBR2_COMPLIANCE_EYE; break; case PHY_TEST_PATTERN_CP2520_2: /* CP2520 pattern is unstable, temporarily use TPS4 instead */ - test_pattern = (force_tps4_for_cp2520 == 1) ? + test_pattern = (link->dc->caps.force_dp_tps4_for_cp2520 == 1) ? DP_TEST_PATTERN_TRAINING_PATTERN4 : DP_TEST_PATTERN_HBR2_COMPLIANCE_EYE; break; diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h index 9cfde0ccf4e9..53c71296f3dd 100644 --- a/drivers/gpu/drm/amd/display/dc/dc.h +++ b/drivers/gpu/drm/amd/display/dc/dc.h @@ -76,6 +76,7 @@ struct dc_caps { bool is_apu; bool dual_link_dvi; bool post_blend_color_processing; + bool force_dp_tps4_for_cp2520; }; struct dc_dcc_surface_param { diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c index df5cb2d1d164..34dac84066a0 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c @@ -1027,6 +1027,8 @@ static bool construct( dc->caps.max_slave_planes = 1; dc->caps.is_apu = true; dc->caps.post_blend_color_processing = false; + /* Raven DP PHY HBR2 eye diagram pattern is not stable. Use TP4 */ + dc->caps.force_dp_tps4_for_cp2520 = true; if (dc->ctx->dce_environment == DCE_ENV_PRODUCTION_DRV) dc->debug = debug_defaults_drv; -- cgit v1.2.3 From 9ba546c01976a426292af99e682a557075d6c010 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 11 Jul 2018 15:48:46 +0200 Subject: aio: don't expose __aio_sigset in uapi glibc uses a different defintion of sigset_t than the kernel does, and the current version would pull in both. To fix this just do not expose the type at all - this somewhat mirrors pselect() where we do not even have a type for the magic sigmask argument, but just use pointer arithmetics. Fixes: 7a074e96 ("aio: implement io_pgetevents") Signed-off-by: Christoph Hellwig Reported-by: Adrian Reber Signed-off-by: Al Viro --- fs/aio.c | 5 +++++ include/linux/syscalls.h | 1 + include/uapi/linux/aio_abi.h | 6 ------ 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/fs/aio.c b/fs/aio.c index e1d20124ec0e..b1a42e45698b 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -2042,6 +2042,11 @@ SYSCALL_DEFINE5(io_getevents, aio_context_t, ctx_id, return ret; } +struct __aio_sigset { + const sigset_t __user *sigmask; + size_t sigsetsize; +}; + SYSCALL_DEFINE6(io_pgetevents, aio_context_t, ctx_id, long, min_nr, diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 73810808cdf2..b06b5eeda8e8 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -11,6 +11,7 @@ #ifndef _LINUX_SYSCALLS_H #define _LINUX_SYSCALLS_H +struct __aio_sigset; struct epoll_event; struct iattr; struct inode; diff --git a/include/uapi/linux/aio_abi.h b/include/uapi/linux/aio_abi.h index d00221345c19..ce43d340f010 100644 --- a/include/uapi/linux/aio_abi.h +++ b/include/uapi/linux/aio_abi.h @@ -29,7 +29,6 @@ #include #include -#include #include typedef __kernel_ulong_t aio_context_t; @@ -108,10 +107,5 @@ struct iocb { #undef IFBIG #undef IFLITTLE -struct __aio_sigset { - const sigset_t __user *sigmask; - size_t sigsetsize; -}; - #endif /* __LINUX__AIO_ABI_H */ -- cgit v1.2.3 From 4aac0b43474d18f6160302a3caa147d77fa3baa1 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Fri, 13 Jul 2018 17:31:50 +0200 Subject: octeon_mgmt: Fix MIX registers configuration on MTU setup octeon_mgmt driver doesn't drop RX frames that are 1-4 bytes bigger than MTU set for the corresponding interface. The problem is in the AGL_GMX_RX0/1_FRM_MAX register setting, which should not account for VLAN tagging. According to Octeon HW manual: "For tagged frames, MAX increases by four bytes for each VLAN found up to a maximum of two VLANs, or MAX + 8 bytes." OCTEON_FRAME_HEADER_LEN "define" is fine for ring buffer management, but should not be used for AGL_GMX_RX0/1_FRM_MAX. The problem could be easily reproduced using "ping" command. If affected system has default MTU 1500, other host (having MTU >= 1504) can successfully "ping" the affected system with payload size 1473-1476, resulting in IP packets of size 1501-1504 accepted by the mgmt driver. Fixed system still accepts IP packets of 1500 bytes even with VLAN tagging, because the limits are lifted in HW as expected, for every VLAN tag. Signed-off-by: Alexander Sverdlin Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/octeon/octeon_mgmt.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c b/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c index 3f6afb54a5eb..bb43ddb7539e 100644 --- a/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c +++ b/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c @@ -643,13 +643,21 @@ static int octeon_mgmt_set_mac_address(struct net_device *netdev, void *addr) static int octeon_mgmt_change_mtu(struct net_device *netdev, int new_mtu) { struct octeon_mgmt *p = netdev_priv(netdev); - int size_without_fcs = new_mtu + OCTEON_MGMT_RX_HEADROOM; + int max_packet = new_mtu + ETH_HLEN + ETH_FCS_LEN; netdev->mtu = new_mtu; - cvmx_write_csr(p->agl + AGL_GMX_RX_FRM_MAX, size_without_fcs); + /* HW lifts the limit if the frame is VLAN tagged + * (+4 bytes per each tag, up to two tags) + */ + cvmx_write_csr(p->agl + AGL_GMX_RX_FRM_MAX, max_packet); + /* Set the hardware to truncate packets larger than the MTU. The jabber + * register must be set to a multiple of 8 bytes, so round up. JABBER is + * an unconditional limit, so we need to account for two possible VLAN + * tags. + */ cvmx_write_csr(p->agl + AGL_GMX_RX_JABBER, - (size_without_fcs + 7) & 0xfff8); + (max_packet + 7 + VLAN_HLEN * 2) & 0xfff8); return 0; } -- cgit v1.2.3 From 3a9b0455062ffb9d2f6cd4473a76e3456f318c9f Mon Sep 17 00:00:00 2001 From: David Lechner Date: Mon, 16 Jul 2018 17:58:10 -0500 Subject: net: usb: rtl8150: demote allmulti message to dev_dbg() This driver can spam the kernel log with multiple messages of: net eth0: eth0: allmulti set Usually 4 or 8 at a time (probably because of using ConnMan). This message doesn't seem useful, so let's demote it from dev_info() to dev_dbg(). Signed-off-by: David Lechner Signed-off-by: David S. Miller --- drivers/net/usb/rtl8150.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c index 5f565bd574da..48ba80a8ca5c 100644 --- a/drivers/net/usb/rtl8150.c +++ b/drivers/net/usb/rtl8150.c @@ -681,7 +681,7 @@ static void rtl8150_set_multicast(struct net_device *netdev) (netdev->flags & IFF_ALLMULTI)) { rx_creg &= 0xfffe; rx_creg |= 0x0002; - dev_info(&netdev->dev, "%s: allmulti set\n", netdev->name); + dev_dbg(&netdev->dev, "%s: allmulti set\n", netdev->name); } else { /* ~RX_MULTICAST, ~RX_PROMISCUOUS */ rx_creg &= 0x00fc; -- cgit v1.2.3 From 1463edca6734d42ab4406fa2896e20b45478ea36 Mon Sep 17 00:00:00 2001 From: Alexey Kardashevskiy Date: Tue, 17 Jul 2018 17:19:12 +1000 Subject: vfio/spapr: Use IOMMU pageshift rather than pagesize The size is always equal to 1 page so let's use this. Later on this will be used for other checks which use page shifts to check the granularity of access. This should cause no behavioral change. Cc: stable@vger.kernel.org # v4.12+ Reviewed-by: David Gibson Acked-by: Alex Williamson Signed-off-by: Alexey Kardashevskiy Signed-off-by: Michael Ellerman --- drivers/vfio/vfio_iommu_spapr_tce.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/vfio/vfio_iommu_spapr_tce.c b/drivers/vfio/vfio_iommu_spapr_tce.c index 759a5bdd40e1..2da5f054257a 100644 --- a/drivers/vfio/vfio_iommu_spapr_tce.c +++ b/drivers/vfio/vfio_iommu_spapr_tce.c @@ -457,13 +457,13 @@ static void tce_iommu_unuse_page(struct tce_container *container, } static int tce_iommu_prereg_ua_to_hpa(struct tce_container *container, - unsigned long tce, unsigned long size, + unsigned long tce, unsigned long shift, unsigned long *phpa, struct mm_iommu_table_group_mem_t **pmem) { long ret = 0; struct mm_iommu_table_group_mem_t *mem; - mem = mm_iommu_lookup(container->mm, tce, size); + mem = mm_iommu_lookup(container->mm, tce, 1ULL << shift); if (!mem) return -EINVAL; @@ -487,7 +487,7 @@ static void tce_iommu_unuse_page_v2(struct tce_container *container, if (!pua) return; - ret = tce_iommu_prereg_ua_to_hpa(container, *pua, IOMMU_PAGE_SIZE(tbl), + ret = tce_iommu_prereg_ua_to_hpa(container, *pua, tbl->it_page_shift, &hpa, &mem); if (ret) pr_debug("%s: tce %lx at #%lx was not cached, ret=%d\n", @@ -611,7 +611,7 @@ static long tce_iommu_build_v2(struct tce_container *container, entry + i); ret = tce_iommu_prereg_ua_to_hpa(container, - tce, IOMMU_PAGE_SIZE(tbl), &hpa, &mem); + tce, tbl->it_page_shift, &hpa, &mem); if (ret) break; -- cgit v1.2.3 From 76fa4975f3ed12d15762bc979ca44078598ed8ee Mon Sep 17 00:00:00 2001 From: Alexey Kardashevskiy Date: Tue, 17 Jul 2018 17:19:13 +1000 Subject: KVM: PPC: Check if IOMMU page is contained in the pinned physical page A VM which has: - a DMA capable device passed through to it (eg. network card); - running a malicious kernel that ignores H_PUT_TCE failure; - capability of using IOMMU pages bigger that physical pages can create an IOMMU mapping that exposes (for example) 16MB of the host physical memory to the device when only 64K was allocated to the VM. The remaining 16MB - 64K will be some other content of host memory, possibly including pages of the VM, but also pages of host kernel memory, host programs or other VMs. The attacking VM does not control the location of the page it can map, and is only allowed to map as many pages as it has pages of RAM. We already have a check in drivers/vfio/vfio_iommu_spapr_tce.c that an IOMMU page is contained in the physical page so the PCI hardware won't get access to unassigned host memory; however this check is missing in the KVM fastpath (H_PUT_TCE accelerated code). We were lucky so far and did not hit this yet as the very first time when the mapping happens we do not have tbl::it_userspace allocated yet and fall back to the userspace which in turn calls VFIO IOMMU driver, this fails and the guest does not retry, This stores the smallest preregistered page size in the preregistered region descriptor and changes the mm_iommu_xxx API to check this against the IOMMU page size. This calculates maximum page size as a minimum of the natural region alignment and compound page size. For the page shift this uses the shift returned by find_linux_pte() which indicates how the page is mapped to the current userspace - if the page is huge and this is not a zero, then it is a leaf pte and the page is mapped within the range. Fixes: 121f80ba68f1 ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alexey Kardashevskiy Reviewed-by: David Gibson Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/mmu_context.h | 4 ++-- arch/powerpc/kvm/book3s_64_vio.c | 2 +- arch/powerpc/kvm/book3s_64_vio_hv.c | 6 ++++-- arch/powerpc/mm/mmu_context_iommu.c | 37 ++++++++++++++++++++++++++++++++-- drivers/vfio/vfio_iommu_spapr_tce.c | 2 +- 5 files changed, 43 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h index 896efa559996..79d570cbf332 100644 --- a/arch/powerpc/include/asm/mmu_context.h +++ b/arch/powerpc/include/asm/mmu_context.h @@ -35,9 +35,9 @@ extern struct mm_iommu_table_group_mem_t *mm_iommu_lookup_rm( extern struct mm_iommu_table_group_mem_t *mm_iommu_find(struct mm_struct *mm, unsigned long ua, unsigned long entries); extern long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem, - unsigned long ua, unsigned long *hpa); + unsigned long ua, unsigned int pageshift, unsigned long *hpa); extern long mm_iommu_ua_to_hpa_rm(struct mm_iommu_table_group_mem_t *mem, - unsigned long ua, unsigned long *hpa); + unsigned long ua, unsigned int pageshift, unsigned long *hpa); extern long mm_iommu_mapped_inc(struct mm_iommu_table_group_mem_t *mem); extern void mm_iommu_mapped_dec(struct mm_iommu_table_group_mem_t *mem); #endif diff --git a/arch/powerpc/kvm/book3s_64_vio.c b/arch/powerpc/kvm/book3s_64_vio.c index d066e37551ec..8c456fa691a5 100644 --- a/arch/powerpc/kvm/book3s_64_vio.c +++ b/arch/powerpc/kvm/book3s_64_vio.c @@ -449,7 +449,7 @@ long kvmppc_tce_iommu_do_map(struct kvm *kvm, struct iommu_table *tbl, /* This only handles v2 IOMMU type, v1 is handled via ioctl() */ return H_TOO_HARD; - if (WARN_ON_ONCE(mm_iommu_ua_to_hpa(mem, ua, &hpa))) + if (WARN_ON_ONCE(mm_iommu_ua_to_hpa(mem, ua, tbl->it_page_shift, &hpa))) return H_HARDWARE; if (mm_iommu_mapped_inc(mem)) diff --git a/arch/powerpc/kvm/book3s_64_vio_hv.c b/arch/powerpc/kvm/book3s_64_vio_hv.c index 925fc316a104..5b298f5a1a14 100644 --- a/arch/powerpc/kvm/book3s_64_vio_hv.c +++ b/arch/powerpc/kvm/book3s_64_vio_hv.c @@ -279,7 +279,8 @@ static long kvmppc_rm_tce_iommu_do_map(struct kvm *kvm, struct iommu_table *tbl, if (!mem) return H_TOO_HARD; - if (WARN_ON_ONCE_RM(mm_iommu_ua_to_hpa_rm(mem, ua, &hpa))) + if (WARN_ON_ONCE_RM(mm_iommu_ua_to_hpa_rm(mem, ua, tbl->it_page_shift, + &hpa))) return H_HARDWARE; pua = (void *) vmalloc_to_phys(pua); @@ -469,7 +470,8 @@ long kvmppc_rm_h_put_tce_indirect(struct kvm_vcpu *vcpu, mem = mm_iommu_lookup_rm(vcpu->kvm->mm, ua, IOMMU_PAGE_SIZE_4K); if (mem) - prereg = mm_iommu_ua_to_hpa_rm(mem, ua, &tces) == 0; + prereg = mm_iommu_ua_to_hpa_rm(mem, ua, + IOMMU_PAGE_SHIFT_4K, &tces) == 0; } if (!prereg) { diff --git a/arch/powerpc/mm/mmu_context_iommu.c b/arch/powerpc/mm/mmu_context_iommu.c index abb43646927a..a4ca57612558 100644 --- a/arch/powerpc/mm/mmu_context_iommu.c +++ b/arch/powerpc/mm/mmu_context_iommu.c @@ -19,6 +19,7 @@ #include #include #include +#include static DEFINE_MUTEX(mem_list_mutex); @@ -27,6 +28,7 @@ struct mm_iommu_table_group_mem_t { struct rcu_head rcu; unsigned long used; atomic64_t mapped; + unsigned int pageshift; u64 ua; /* userspace address */ u64 entries; /* number of entries in hpas[] */ u64 *hpas; /* vmalloc'ed */ @@ -125,6 +127,8 @@ long mm_iommu_get(struct mm_struct *mm, unsigned long ua, unsigned long entries, { struct mm_iommu_table_group_mem_t *mem; long i, j, ret = 0, locked_entries = 0; + unsigned int pageshift; + unsigned long flags; struct page *page = NULL; mutex_lock(&mem_list_mutex); @@ -159,6 +163,12 @@ long mm_iommu_get(struct mm_struct *mm, unsigned long ua, unsigned long entries, goto unlock_exit; } + /* + * For a starting point for a maximum page size calculation + * we use @ua and @entries natural alignment to allow IOMMU pages + * smaller than huge pages but still bigger than PAGE_SIZE. + */ + mem->pageshift = __ffs(ua | (entries << PAGE_SHIFT)); mem->hpas = vzalloc(array_size(entries, sizeof(mem->hpas[0]))); if (!mem->hpas) { kfree(mem); @@ -199,6 +209,23 @@ long mm_iommu_get(struct mm_struct *mm, unsigned long ua, unsigned long entries, } } populate: + pageshift = PAGE_SHIFT; + if (PageCompound(page)) { + pte_t *pte; + struct page *head = compound_head(page); + unsigned int compshift = compound_order(head); + + local_irq_save(flags); /* disables as well */ + pte = find_linux_pte(mm->pgd, ua, NULL, &pageshift); + local_irq_restore(flags); + + /* Double check it is still the same pinned page */ + if (pte && pte_page(*pte) == head && + pageshift == compshift) + pageshift = max_t(unsigned int, pageshift, + PAGE_SHIFT); + } + mem->pageshift = min(mem->pageshift, pageshift); mem->hpas[i] = page_to_pfn(page) << PAGE_SHIFT; } @@ -349,7 +376,7 @@ struct mm_iommu_table_group_mem_t *mm_iommu_find(struct mm_struct *mm, EXPORT_SYMBOL_GPL(mm_iommu_find); long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem, - unsigned long ua, unsigned long *hpa) + unsigned long ua, unsigned int pageshift, unsigned long *hpa) { const long entry = (ua - mem->ua) >> PAGE_SHIFT; u64 *va = &mem->hpas[entry]; @@ -357,6 +384,9 @@ long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem, if (entry >= mem->entries) return -EFAULT; + if (pageshift > mem->pageshift) + return -EFAULT; + *hpa = *va | (ua & ~PAGE_MASK); return 0; @@ -364,7 +394,7 @@ long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem, EXPORT_SYMBOL_GPL(mm_iommu_ua_to_hpa); long mm_iommu_ua_to_hpa_rm(struct mm_iommu_table_group_mem_t *mem, - unsigned long ua, unsigned long *hpa) + unsigned long ua, unsigned int pageshift, unsigned long *hpa) { const long entry = (ua - mem->ua) >> PAGE_SHIFT; void *va = &mem->hpas[entry]; @@ -373,6 +403,9 @@ long mm_iommu_ua_to_hpa_rm(struct mm_iommu_table_group_mem_t *mem, if (entry >= mem->entries) return -EFAULT; + if (pageshift > mem->pageshift) + return -EFAULT; + pa = (void *) vmalloc_to_phys(va); if (!pa) return -EFAULT; diff --git a/drivers/vfio/vfio_iommu_spapr_tce.c b/drivers/vfio/vfio_iommu_spapr_tce.c index 2da5f054257a..7cd63b0c1a46 100644 --- a/drivers/vfio/vfio_iommu_spapr_tce.c +++ b/drivers/vfio/vfio_iommu_spapr_tce.c @@ -467,7 +467,7 @@ static int tce_iommu_prereg_ua_to_hpa(struct tce_container *container, if (!mem) return -EINVAL; - ret = mm_iommu_ua_to_hpa(mem, tce, phpa); + ret = mm_iommu_ua_to_hpa(mem, tce, shift, phpa); if (ret) return -EINVAL; -- cgit v1.2.3 From b5020a8e6b54d2ece80b1e7dedb33c79a40ebd47 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Thu, 21 Dec 2017 21:10:36 -0500 Subject: KVM/Eventfd: Avoid crash when assign and deassign specific eventfd in parallel. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Syzbot reports crashes in kvm_irqfd_assign(), caused by use-after-free when kvm_irqfd_assign() and kvm_irqfd_deassign() run in parallel for one specific eventfd. When the assign path hasn't finished but irqfd has been added to kvm->irqfds.items list, another thead may deassign the eventfd and free struct kvm_kernel_irqfd(). The assign path then uses the struct kvm_kernel_irqfd that has been freed by deassign path. To avoid such issue, keep irqfd under kvm->irq_srcu protection after the irqfd has been added to kvm->irqfds.items list, and call synchronize_srcu() in irq_shutdown() to make sure that irqfd has been fully initialized in the assign path. Reported-by: Dmitry Vyukov Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Dmitry Vyukov Signed-off-by: Tianyu Lan Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- virt/kvm/eventfd.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c index 6e865e8b5b10..decefe944b0f 100644 --- a/virt/kvm/eventfd.c +++ b/virt/kvm/eventfd.c @@ -119,8 +119,12 @@ irqfd_shutdown(struct work_struct *work) { struct kvm_kernel_irqfd *irqfd = container_of(work, struct kvm_kernel_irqfd, shutdown); + struct kvm *kvm = irqfd->kvm; u64 cnt; + /* Make sure irqfd has been initalized in assign path. */ + synchronize_srcu(&kvm->irq_srcu); + /* * Synchronize with the wait-queue and unhook ourselves to prevent * further events. @@ -387,7 +391,6 @@ kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args) idx = srcu_read_lock(&kvm->irq_srcu); irqfd_update(kvm, irqfd); - srcu_read_unlock(&kvm->irq_srcu, idx); list_add_tail(&irqfd->list, &kvm->irqfds.items); @@ -421,6 +424,7 @@ kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args) } #endif + srcu_read_unlock(&kvm->irq_srcu, idx); return 0; fail: -- cgit v1.2.3 From 9432a3175770e06cb83eada2d91fac90c977cb99 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Mon, 28 May 2018 13:31:13 +0200 Subject: KVM: irqfd: fix race between EPOLLHUP and irq_bypass_register_consumer A comment warning against this bug is there, but the code is not doing what the comment says. Therefore it is possible that an EPOLLHUP races against irq_bypass_register_consumer. The EPOLLHUP handler schedules irqfd_shutdown, and if that runs soon enough, you get a use-after-free. Reported-by: syzbot Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Reviewed-by: David Hildenbrand --- virt/kvm/eventfd.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c index decefe944b0f..fe6eb0fe07f6 100644 --- a/virt/kvm/eventfd.c +++ b/virt/kvm/eventfd.c @@ -405,11 +405,6 @@ kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args) if (events & EPOLLIN) schedule_work(&irqfd->inject); - /* - * do not drop the file until the irqfd is fully initialized, otherwise - * we might race against the EPOLLHUP - */ - fdput(f); #ifdef CONFIG_HAVE_KVM_IRQ_BYPASS if (kvm_arch_has_irq_bypass()) { irqfd->consumer.token = (void *)irqfd->eventfd; @@ -425,6 +420,12 @@ kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args) #endif srcu_read_unlock(&kvm->irq_srcu, idx); + + /* + * do not drop the file until the irqfd is fully initialized, otherwise + * we might race against the EPOLLHUP + */ + fdput(f); return 0; fail: -- cgit v1.2.3 From 2307af1c4b2e0ad886f30e31739845322cbd328b Mon Sep 17 00:00:00 2001 From: Liran Alon Date: Fri, 29 Jun 2018 22:59:04 +0300 Subject: KVM: VMX: Mark VMXArea with revision_id of physical CPU even when eVMCS enabled When eVMCS is enabled, all VMCS allocated to be used by KVM are marked with revision_id of KVM_EVMCS_VERSION instead of revision_id reported by MSR_IA32_VMX_BASIC. However, even though not explictly documented by TLFS, VMXArea passed as VMXON argument should still be marked with revision_id reported by physical CPU. This issue was found by the following setup: * L0 = KVM which expose eVMCS to it's L1 guest. * L1 = KVM which consume eVMCS reported by L0. This setup caused the following to occur: 1) L1 execute hardware_enable(). 2) hardware_enable() calls kvm_cpu_vmxon() to execute VMXON. 3) L0 intercept L1 VMXON and execute handle_vmon() which notes vmxarea->revision_id != VMCS12_REVISION and therefore fails with nested_vmx_failInvalid() which sets RFLAGS.CF. 4) L1 kvm_cpu_vmxon() don't check RFLAGS.CF for failure and therefore hardware_enable() continues as usual. 5) L1 hardware_enable() then calls ept_sync_global() which executes INVEPT. 6) L0 intercept INVEPT and execute handle_invept() which notes !vmx->nested.vmxon and thus raise a #UD to L1. 7) Raised #UD caused L1 to panic. Reviewed-by: Krish Sadhukhan Cc: stable@vger.kernel.org Fixes: 773e8a0425c923bc02668a2d6534a5ef5a43cc69 Signed-off-by: Liran Alon Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index ba981459d706..c3c85908b8de 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -4108,11 +4108,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf) vmcs_conf->order = get_order(vmcs_conf->size); vmcs_conf->basic_cap = vmx_msr_high & ~0x1fff; - /* KVM supports Enlightened VMCS v1 only */ - if (static_branch_unlikely(&enable_evmcs)) - vmcs_conf->revision_id = KVM_EVMCS_VERSION; - else - vmcs_conf->revision_id = vmx_msr_low; + vmcs_conf->revision_id = vmx_msr_low; vmcs_conf->pin_based_exec_ctrl = _pin_based_exec_control; vmcs_conf->cpu_based_exec_ctrl = _cpu_based_exec_control; @@ -4182,7 +4178,13 @@ static struct vmcs *alloc_vmcs_cpu(int cpu) return NULL; vmcs = page_address(pages); memset(vmcs, 0, vmcs_config.size); - vmcs->revision_id = vmcs_config.revision_id; /* vmcs revision id */ + + /* KVM supports Enlightened VMCS v1 only */ + if (static_branch_unlikely(&enable_evmcs)) + vmcs->revision_id = KVM_EVMCS_VERSION; + else + vmcs->revision_id = vmcs_config.revision_id; + return vmcs; } @@ -4341,6 +4343,19 @@ static __init int alloc_kvm_area(void) return -ENOMEM; } + /* + * When eVMCS is enabled, alloc_vmcs_cpu() sets + * vmcs->revision_id to KVM_EVMCS_VERSION instead of + * revision_id reported by MSR_IA32_VMX_BASIC. + * + * However, even though not explictly documented by + * TLFS, VMXArea passed as VMXON argument should + * still be marked with revision_id reported by + * physical CPU. + */ + if (static_branch_unlikely(&enable_evmcs)) + vmcs->revision_id = vmcs_config.revision_id; + per_cpu(vmxarea, cpu) = vmcs; } return 0; -- cgit v1.2.3 From e10f7805032365cc11c739a97f226ebb48aee042 Mon Sep 17 00:00:00 2001 From: Peng Hao Date: Sat, 14 Jul 2018 23:28:29 +0800 Subject: kvmclock: fix TSC calibration for nested guests Inside a nested guest, access to hardware can be slow enough that tsc_read_refs always return ULLONG_MAX, causing tsc_refine_calibration_work to be called periodically and the nested guest to spend a lot of time reading the ACPI timer. However, if the TSC frequency is available from the pvclock page, we can just set X86_FEATURE_TSC_KNOWN_FREQ and avoid the recalibration. 'refine' operation. Suggested-by: Peter Zijlstra Signed-off-by: Peng Hao [Commit message rewritten. - Paolo] Signed-off-by: Paolo Bonzini --- arch/x86/kernel/kvmclock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index d79a18b4cf9d..4c53d12ca933 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -138,6 +138,7 @@ static unsigned long kvm_get_tsc_khz(void) src = &hv_clock[cpu].pvti; tsc_khz = pvclock_tsc_khz(src); put_cpu(); + setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ); return tsc_khz; } -- cgit v1.2.3 From f3d737b6340b0c7bacd8bc751605f0ed6203f146 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 17 Jul 2018 17:08:32 +0200 Subject: ALSA: hda/realtek - Yet another Clevo P950 quirk entry The PCI SSID 1558:95e1 needs the same quirk for other Clevo P950 models, too. Otherwise no sound comes out of speakers. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1101143 Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b8a21ff8e68c..f6af3e1c2b93 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2366,6 +2366,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK_VENDOR(0x1462, "MSI", ALC882_FIXUP_GPIO3), SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", ALC882_FIXUP_ABIT_AW9D_MAX), SND_PCI_QUIRK(0x1558, 0x9501, "Clevo P950HR", ALC1220_FIXUP_CLEVO_P950), + SND_PCI_QUIRK(0x1558, 0x95e1, "Clevo P95xER", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1558, 0x95e2, "Clevo P950ER", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC882_FIXUP_EAPD), SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_FIXUP_EAPD), -- cgit v1.2.3 From 4e4a4b75ccce827f9b8b04b6ee5c90169df4b6ee Mon Sep 17 00:00:00 2001 From: James Clarke Date: Thu, 12 Jul 2018 22:41:49 +0100 Subject: powerpc/Makefile: Assemble with -me500 when building for E500 Some of the assembly files use instructions specific to BookE or E500, which are rejected with the now-default -mcpu=powerpc, so we must pass -me500 to the assembler just as we pass -me200 for E200. Fixes: 4bf4f42a2feb ("powerpc/kbuild: Set default generic machine type for 32-bit compile") Signed-off-by: James Clarke Signed-off-by: Michael Ellerman --- arch/powerpc/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 2ea575cb3401..fb96206de317 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -243,6 +243,7 @@ endif cpu-as-$(CONFIG_4xx) += -Wa,-m405 cpu-as-$(CONFIG_ALTIVEC) += $(call as-option,-Wa$(comma)-maltivec) cpu-as-$(CONFIG_E200) += -Wa,-me200 +cpu-as-$(CONFIG_E500) += -Wa,-me500 cpu-as-$(CONFIG_PPC_BOOK3S_64) += -Wa,-mpower4 cpu-as-$(CONFIG_PPC_E500MC) += $(call as-option,-Wa$(comma)-me500mc) -- cgit v1.2.3 From b03897cf318dfc47de33a7ecbc7655584266f034 Mon Sep 17 00:00:00 2001 From: "Gautham R. Shenoy" Date: Wed, 18 Jul 2018 14:03:16 +0530 Subject: powerpc/powernv: Fix save/restore of SPRG3 on entry/exit from stop (idle) On 64-bit servers, SPRN_SPRG3 and its userspace read-only mirror SPRN_USPRG3 are used as userspace VDSO write and read registers respectively. SPRN_SPRG3 is lost when we enter stop4 and above, and is currently not restored. As a result, any read from SPRN_USPRG3 returns zero on an exit from stop4 (Power9 only) and above. Thus in this situation, on POWER9, any call from sched_getcpu() always returns zero, as on powerpc, we call __kernel_getcpu() which relies upon SPRN_USPRG3 to report the CPU and NUMA node information. Fix this by restoring SPRN_SPRG3 on wake up from a deep stop state with the sprg_vdso value that is cached in PACA. Fixes: e1c1cfed5432 ("powerpc/powernv: Save/Restore additional SPRs for stop4 cpuidle") Cc: stable@vger.kernel.org # v4.14+ Reported-by: Florian Weimer Signed-off-by: Gautham R. Shenoy Reviewed-by: Michael Ellerman Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/idle_book3s.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S index e734f6e45abc..689306118b48 100644 --- a/arch/powerpc/kernel/idle_book3s.S +++ b/arch/powerpc/kernel/idle_book3s.S @@ -144,7 +144,9 @@ power9_restore_additional_sprs: mtspr SPRN_MMCR1, r4 ld r3, STOP_MMCR2(r13) + ld r4, PACA_SPRG_VDSO(r13) mtspr SPRN_MMCR2, r3 + mtspr SPRN_SPRG3, r4 blr /* -- cgit v1.2.3 From 95d6c0857e54b788982746071130d822a795026b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 18 Jul 2018 13:38:37 +0200 Subject: cpufreq: intel_pstate: Register when ACPI PCCH is present Currently, intel_pstate doesn't register if _PSS is not present on HP Proliant systems, because it expects the firmware to take over CPU performance scaling in that case. However, if ACPI PCCH is present, the firmware expects the kernel to use it for CPU performance scaling and the pcc-cpufreq driver is loaded for that. Unfortunately, the firmware interface used by that driver is not scalable for fundamental reasons, so pcc-cpufreq is way suboptimal on systems with more than just a few CPUs. In fact, it is better to avoid using it at all. For this reason, modify intel_pstate to look for ACPI PCCH if _PSS is not present and register if it is there. Also prevent the pcc-cpufreq driver from trying to initialize itself if intel_pstate has been registered already. Fixes: fbbcdc0744da (intel_pstate: skip the driver if ACPI has power mgmt option) Reported-by: Andreas Herrmann Reviewed-by: Andreas Herrmann Acked-by: Srinivas Pandruvada Tested-by: Andreas Herrmann Cc: 4.16+ # 4.16+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 17 ++++++++++++++++- drivers/cpufreq/pcc-cpufreq.c | 4 ++++ 2 files changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index ece120da3353..3c3971256130 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -2394,6 +2394,18 @@ static bool __init intel_pstate_no_acpi_pss(void) return true; } +static bool __init intel_pstate_no_acpi_pcch(void) +{ + acpi_status status; + acpi_handle handle; + + status = acpi_get_handle(NULL, "\\_SB", &handle); + if (ACPI_FAILURE(status)) + return true; + + return !acpi_has_method(handle, "PCCH"); +} + static bool __init intel_pstate_has_acpi_ppc(void) { int i; @@ -2453,7 +2465,10 @@ static bool __init intel_pstate_platform_pwr_mgmt_exists(void) switch (plat_info[idx].data) { case PSS: - return intel_pstate_no_acpi_pss(); + if (!intel_pstate_no_acpi_pss()) + return false; + + return intel_pstate_no_acpi_pcch(); case PPC: return intel_pstate_has_acpi_ppc() && !force_load; } diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c index 3f0ce2ae35ee..0c56c9759672 100644 --- a/drivers/cpufreq/pcc-cpufreq.c +++ b/drivers/cpufreq/pcc-cpufreq.c @@ -580,6 +580,10 @@ static int __init pcc_cpufreq_init(void) { int ret; + /* Skip initialization if another cpufreq driver is there. */ + if (cpufreq_get_current_driver()) + return 0; + if (acpi_disabled) return 0; -- cgit v1.2.3 From b3fc2ab37e27f8d6588a4755382346ba2335a7c7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 17 Jul 2018 10:52:29 -0500 Subject: drm/amdgpu: add another ATPX quirk for TOPAZ Needs ATPX rather than _PR3. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=200517 Reviewed-by: Junwei Zhang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c index 9ab89371d9e8..ca8bf1c9a98e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c @@ -575,6 +575,7 @@ static const struct amdgpu_px_quirk amdgpu_px_quirk_list[] = { { 0x1002, 0x6900, 0x1002, 0x0124, AMDGPU_PX_QUIRK_FORCE_ATPX }, { 0x1002, 0x6900, 0x1028, 0x0812, AMDGPU_PX_QUIRK_FORCE_ATPX }, { 0x1002, 0x6900, 0x1028, 0x0813, AMDGPU_PX_QUIRK_FORCE_ATPX }, + { 0x1002, 0x6900, 0x1025, 0x125A, AMDGPU_PX_QUIRK_FORCE_ATPX }, { 0, 0, 0, 0, 0 }, }; -- cgit v1.2.3 From 2d95ceb45459357288058c646022019d257ae04b Mon Sep 17 00:00:00 2001 From: Vijendar Mukunda Date: Fri, 16 Feb 2018 14:14:03 +0530 Subject: drm/amd/amdgpu: creating two I2S instances for stoney/cz (v2) Creating two I2S instances for Stoney/cz platforms. v2: squash in: "drm/amdgpu/acp: Fix slab-out-of-bounds in mfd_add_device in acp_hw_init" From Daniel Kurtz . Signed-off-by: Vijendar Mukunda Signed-off-by: Akshu Agrawal Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c | 47 ++++++++++++++++++++++++++------- 1 file changed, 37 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c index f4c474a95875..71efcf38f11b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c @@ -57,6 +57,10 @@ #define ACP_I2S_COMP2_CAP_REG_OFFSET 0xa8 #define ACP_I2S_COMP1_PLAY_REG_OFFSET 0x6c #define ACP_I2S_COMP2_PLAY_REG_OFFSET 0x68 +#define ACP_BT_PLAY_REGS_START 0x14970 +#define ACP_BT_PLAY_REGS_END 0x14a24 +#define ACP_BT_COMP1_REG_OFFSET 0xac +#define ACP_BT_COMP2_REG_OFFSET 0xa8 #define mmACP_PGFSM_RETAIN_REG 0x51c9 #define mmACP_PGFSM_CONFIG_REG 0x51ca @@ -77,7 +81,7 @@ #define ACP_SOFT_RESET_DONE_TIME_OUT_VALUE 0x000000FF #define ACP_TIMEOUT_LOOP 0x000000FF -#define ACP_DEVS 3 +#define ACP_DEVS 4 #define ACP_SRC_ID 162 enum { @@ -316,14 +320,13 @@ static int acp_hw_init(void *handle) if (adev->acp.acp_cell == NULL) return -ENOMEM; - adev->acp.acp_res = kcalloc(4, sizeof(struct resource), GFP_KERNEL); - + adev->acp.acp_res = kcalloc(5, sizeof(struct resource), GFP_KERNEL); if (adev->acp.acp_res == NULL) { kfree(adev->acp.acp_cell); return -ENOMEM; } - i2s_pdata = kcalloc(2, sizeof(struct i2s_platform_data), GFP_KERNEL); + i2s_pdata = kcalloc(3, sizeof(struct i2s_platform_data), GFP_KERNEL); if (i2s_pdata == NULL) { kfree(adev->acp.acp_res); kfree(adev->acp.acp_cell); @@ -358,6 +361,20 @@ static int acp_hw_init(void *handle) i2s_pdata[1].i2s_reg_comp1 = ACP_I2S_COMP1_CAP_REG_OFFSET; i2s_pdata[1].i2s_reg_comp2 = ACP_I2S_COMP2_CAP_REG_OFFSET; + i2s_pdata[2].quirks = DW_I2S_QUIRK_COMP_REG_OFFSET; + switch (adev->asic_type) { + case CHIP_STONEY: + i2s_pdata[2].quirks |= DW_I2S_QUIRK_16BIT_IDX_OVERRIDE; + break; + default: + break; + } + + i2s_pdata[2].cap = DWC_I2S_PLAY | DWC_I2S_RECORD; + i2s_pdata[2].snd_rates = SNDRV_PCM_RATE_8000_96000; + i2s_pdata[2].i2s_reg_comp1 = ACP_BT_COMP1_REG_OFFSET; + i2s_pdata[2].i2s_reg_comp2 = ACP_BT_COMP2_REG_OFFSET; + adev->acp.acp_res[0].name = "acp2x_dma"; adev->acp.acp_res[0].flags = IORESOURCE_MEM; adev->acp.acp_res[0].start = acp_base; @@ -373,13 +390,18 @@ static int acp_hw_init(void *handle) adev->acp.acp_res[2].start = acp_base + ACP_I2S_CAP_REGS_START; adev->acp.acp_res[2].end = acp_base + ACP_I2S_CAP_REGS_END; - adev->acp.acp_res[3].name = "acp2x_dma_irq"; - adev->acp.acp_res[3].flags = IORESOURCE_IRQ; - adev->acp.acp_res[3].start = amdgpu_irq_create_mapping(adev, 162); - adev->acp.acp_res[3].end = adev->acp.acp_res[3].start; + adev->acp.acp_res[3].name = "acp2x_dw_bt_i2s_play_cap"; + adev->acp.acp_res[3].flags = IORESOURCE_MEM; + adev->acp.acp_res[3].start = acp_base + ACP_BT_PLAY_REGS_START; + adev->acp.acp_res[3].end = acp_base + ACP_BT_PLAY_REGS_END; + + adev->acp.acp_res[4].name = "acp2x_dma_irq"; + adev->acp.acp_res[4].flags = IORESOURCE_IRQ; + adev->acp.acp_res[4].start = amdgpu_irq_create_mapping(adev, 162); + adev->acp.acp_res[4].end = adev->acp.acp_res[4].start; adev->acp.acp_cell[0].name = "acp_audio_dma"; - adev->acp.acp_cell[0].num_resources = 4; + adev->acp.acp_cell[0].num_resources = 5; adev->acp.acp_cell[0].resources = &adev->acp.acp_res[0]; adev->acp.acp_cell[0].platform_data = &adev->asic_type; adev->acp.acp_cell[0].pdata_size = sizeof(adev->asic_type); @@ -396,6 +418,12 @@ static int acp_hw_init(void *handle) adev->acp.acp_cell[2].platform_data = &i2s_pdata[1]; adev->acp.acp_cell[2].pdata_size = sizeof(struct i2s_platform_data); + adev->acp.acp_cell[3].name = "designware-i2s"; + adev->acp.acp_cell[3].num_resources = 1; + adev->acp.acp_cell[3].resources = &adev->acp.acp_res[3]; + adev->acp.acp_cell[3].platform_data = &i2s_pdata[2]; + adev->acp.acp_cell[3].pdata_size = sizeof(struct i2s_platform_data); + r = mfd_add_hotplug_devices(adev->acp.parent, adev->acp.acp_cell, ACP_DEVS); if (r) @@ -451,7 +479,6 @@ static int acp_hw_init(void *handle) val = cgs_read_register(adev->acp.cgs_device, mmACP_SOFT_RESET); val &= ~ACP_SOFT_RESET__SoftResetAud_MASK; cgs_write_register(adev->acp.cgs_device, mmACP_SOFT_RESET, val); - return 0; } -- cgit v1.2.3 From 83ed7d1fe2d2d4a11b30660dec20168bb473d9c1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 18 Jul 2018 10:48:56 +0200 Subject: ipv6: ila: select CONFIG_DST_CACHE My randconfig builds came across an old missing dependency for ILA: ERROR: "dst_cache_set_ip6" [net/ipv6/ila/ila.ko] undefined! ERROR: "dst_cache_get" [net/ipv6/ila/ila.ko] undefined! ERROR: "dst_cache_init" [net/ipv6/ila/ila.ko] undefined! ERROR: "dst_cache_destroy" [net/ipv6/ila/ila.ko] undefined! We almost never run into this by accident because randconfig builds end up selecting DST_CACHE from some other tunnel protocol, and this one appears to be the only one missing the explicit 'select'. >From all I can tell, this problem first appeared in linux-4.9 when dst_cache support got added to ILA. Fixes: 79ff2fc31e0f ("ila: Cache a route to translated address") Cc: Tom Herbert Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- net/ipv6/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig index 0eff75525da1..b3885ca22d6f 100644 --- a/net/ipv6/Kconfig +++ b/net/ipv6/Kconfig @@ -108,6 +108,7 @@ config IPV6_MIP6 config IPV6_ILA tristate "IPv6: Identifier Locator Addressing (ILA)" depends on NETFILTER + select DST_CACHE select LWTUNNEL ---help--- Support for IPv6 Identifier Locator Addressing (ILA). -- cgit v1.2.3 From 3bc53be9db21040b5d2de4d455f023c8c494aa68 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Wed, 18 Jul 2018 18:57:27 +0900 Subject: net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL. syzbot is reporting stalls at nfc_llcp_send_ui_frame() [1]. This is because nfc_llcp_send_ui_frame() is retrying the loop without any delay when nonblocking nfc_alloc_send_skb() returned NULL. Since there is no need to use MSG_DONTWAIT if we retry until sock_alloc_send_pskb() succeeds, let's use blocking call. Also, in case an unexpected error occurred, let's break the loop if blocking nfc_alloc_send_skb() failed. [1] https://syzkaller.appspot.com/bug?id=4a131cc571c3733e0eff6bc673f4e36ae48f19c6 Signed-off-by: Tetsuo Handa Reported-by: syzbot Signed-off-by: David S. Miller --- net/nfc/llcp_commands.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/nfc/llcp_commands.c b/net/nfc/llcp_commands.c index 2ceefa183cee..6a196e438b6c 100644 --- a/net/nfc/llcp_commands.c +++ b/net/nfc/llcp_commands.c @@ -752,11 +752,14 @@ int nfc_llcp_send_ui_frame(struct nfc_llcp_sock *sock, u8 ssap, u8 dsap, pr_debug("Fragment %zd bytes remaining %zd", frag_len, remaining_len); - pdu = nfc_alloc_send_skb(sock->dev, &sock->sk, MSG_DONTWAIT, + pdu = nfc_alloc_send_skb(sock->dev, &sock->sk, 0, frag_len + LLCP_HEADER_SIZE, &err); if (pdu == NULL) { - pr_err("Could not allocate PDU\n"); - continue; + pr_err("Could not allocate PDU (error=%d)\n", err); + len -= remaining_len; + if (len == 0) + len = err; + break; } pdu = llcp_add_header(pdu, dsap, ssap, LLCP_PDU_UI); -- cgit v1.2.3 From 99be51f11d51400f744632f3938445a8d4de8943 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Wed, 18 Jul 2018 15:22:49 +0200 Subject: net/smc: optimize consumer cursor updates The SMC protocol requires to send a separate consumer cursor update, if it cannot be piggybacked to updates of the producer cursor. Currently the decision to send a separate consumer cursor update just considers the amount of data already received by the socket program. It does not consider the amount of data already arrived, but not yet consumed by the receiver. Basing the decision on the difference between already confirmed and already arrived data (instead of difference between already confirmed and already consumed data), may lead to a somewhat earlier consumer cursor update send in fast unidirectional traffic scenarios, and thus to better throughput. Signed-off-by: Ursula Braun Suggested-by: Thomas Richter Signed-off-by: David S. Miller --- net/smc/smc_tx.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/net/smc/smc_tx.c b/net/smc/smc_tx.c index cee666400752..f82886b7d1d8 100644 --- a/net/smc/smc_tx.c +++ b/net/smc/smc_tx.c @@ -495,7 +495,8 @@ out: void smc_tx_consumer_update(struct smc_connection *conn, bool force) { - union smc_host_cursor cfed, cons; + union smc_host_cursor cfed, cons, prod; + int sender_free = conn->rmb_desc->len; int to_confirm; smc_curs_write(&cons, @@ -505,11 +506,18 @@ void smc_tx_consumer_update(struct smc_connection *conn, bool force) smc_curs_read(&conn->rx_curs_confirmed, conn), conn); to_confirm = smc_curs_diff(conn->rmb_desc->len, &cfed, &cons); + if (to_confirm > conn->rmbe_update_limit) { + smc_curs_write(&prod, + smc_curs_read(&conn->local_rx_ctrl.prod, conn), + conn); + sender_free = conn->rmb_desc->len - + smc_curs_diff(conn->rmb_desc->len, &prod, &cfed); + } if (conn->local_rx_ctrl.prod_flags.cons_curs_upd_req || force || ((to_confirm > conn->rmbe_update_limit) && - ((to_confirm > (conn->rmb_desc->len / 2)) || + ((sender_free <= (conn->rmb_desc->len / 2)) || conn->local_rx_ctrl.prod_flags.write_blocked))) { if ((smc_cdc_get_slot_and_msg_send(conn) < 0) && conn->alert_token_local) { /* connection healthy */ -- cgit v1.2.3 From ac0107edba253a6e58e923f9e68825decef3e681 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Wed, 18 Jul 2018 15:22:50 +0200 Subject: net/smc: add error handling for get_user() For security reasons the return code of get_user() should always be checked. Fixes: 01d2f7e2cdd31 ("net/smc: sockopts TCP_NODELAY and TCP_CORK") Reported-by: Heiko Carstens Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/af_smc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index c12a7fc18f56..6e5479067db0 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -1456,7 +1456,8 @@ static int smc_setsockopt(struct socket *sock, int level, int optname, if (optlen < sizeof(int)) return -EINVAL; - get_user(val, (int __user *)optval); + if (get_user(val, (int __user *)optval)) + return -EFAULT; lock_sock(sk); switch (optname) { -- cgit v1.2.3 From f6bdc42f021194ec095914b92c7a8b1a09789e6d Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Wed, 18 Jul 2018 15:22:51 +0200 Subject: net/smc: reset recv timeout after clc handshake During clc handshake the receive timeout is set to CLC_WAIT_TIME. Remember and reset the original timeout value after the receive calls, and remove a duplicate assignment of CLC_WAIT_TIME. Signed-off-by: Karsten Graul Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/smc_clc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/smc/smc_clc.c b/net/smc/smc_clc.c index 717449b1da0b..ae5d168653ce 100644 --- a/net/smc/smc_clc.c +++ b/net/smc/smc_clc.c @@ -250,6 +250,7 @@ out: int smc_clc_wait_msg(struct smc_sock *smc, void *buf, int buflen, u8 expected_type) { + long rcvtimeo = smc->clcsock->sk->sk_rcvtimeo; struct sock *clc_sk = smc->clcsock->sk; struct smc_clc_msg_hdr *clcm = buf; struct msghdr msg = {NULL, 0}; @@ -306,7 +307,6 @@ int smc_clc_wait_msg(struct smc_sock *smc, void *buf, int buflen, memset(&msg, 0, sizeof(struct msghdr)); iov_iter_kvec(&msg.msg_iter, READ | ITER_KVEC, &vec, 1, datlen); krflags = MSG_WAITALL; - smc->clcsock->sk->sk_rcvtimeo = CLC_WAIT_TIME; len = sock_recvmsg(smc->clcsock, &msg, krflags); if (len < datlen || !smc_clc_msg_hdr_valid(clcm)) { smc->sk.sk_err = EPROTO; @@ -322,6 +322,7 @@ int smc_clc_wait_msg(struct smc_sock *smc, void *buf, int buflen, } out: + smc->clcsock->sk->sk_rcvtimeo = rcvtimeo; return reason_code; } -- cgit v1.2.3 From 0e714d27786ce1fb3efa9aac58abc096e68b1c2a Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 17 Jul 2018 12:39:00 -0500 Subject: vfio/pci: Fix potential Spectre v1 info.index can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/vfio/pci/vfio_pci.c:734 vfio_pci_ioctl() warn: potential spectre issue 'vdev->region' Fix this by sanitizing info.index before indirectly using it to index vdev->region Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Signed-off-by: Alex Williamson --- drivers/vfio/pci/vfio_pci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c index b423a309a6e0..125b58eff936 100644 --- a/drivers/vfio/pci/vfio_pci.c +++ b/drivers/vfio/pci/vfio_pci.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "vfio_pci_private.h" @@ -727,6 +728,9 @@ static long vfio_pci_ioctl(void *device_data, if (info.index >= VFIO_PCI_NUM_REGIONS + vdev->num_regions) return -EINVAL; + info.index = array_index_nospec(info.index, + VFIO_PCI_NUM_REGIONS + + vdev->num_regions); i = info.index - VFIO_PCI_NUM_REGIONS; -- cgit v1.2.3 From 107d01f5ba10f4162c38109496607eb197059064 Mon Sep 17 00:00:00 2001 From: Davidlohr Bueso Date: Mon, 16 Jul 2018 13:26:13 -0700 Subject: lib/rhashtable: consider param->min_size when setting initial table size rhashtable_init() currently does not take into account the user-passed min_size parameter unless param->nelem_hint is set as well. As such, the default size (number of buckets) will always be HASH_DEFAULT_SIZE even if the smallest allowed size is larger than that. Remediate this by unconditionally calling into rounded_hashtable_size() and handling things accordingly. Signed-off-by: Davidlohr Bueso Acked-by: Herbert Xu Signed-off-by: David S. Miller --- lib/rhashtable.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/lib/rhashtable.c b/lib/rhashtable.c index 0183d07a9b4d..e5c8586cf717 100644 --- a/lib/rhashtable.c +++ b/lib/rhashtable.c @@ -964,8 +964,16 @@ EXPORT_SYMBOL_GPL(rhashtable_walk_stop); static size_t rounded_hashtable_size(const struct rhashtable_params *params) { - return max(roundup_pow_of_two(params->nelem_hint * 4 / 3), - (unsigned long)params->min_size); + size_t retsize; + + if (params->nelem_hint) + retsize = max(roundup_pow_of_two(params->nelem_hint * 4 / 3), + (unsigned long)params->min_size); + else + retsize = max(HASH_DEFAULT_SIZE, + (unsigned long)params->min_size); + + return retsize; } static u32 rhashtable_jhash2(const void *key, u32 length, u32 seed) @@ -1022,8 +1030,6 @@ int rhashtable_init(struct rhashtable *ht, struct bucket_table *tbl; size_t size; - size = HASH_DEFAULT_SIZE; - if ((!params->key_len && !params->obj_hashfn) || (params->obj_hashfn && !params->obj_cmpfn)) return -EINVAL; @@ -1050,8 +1056,7 @@ int rhashtable_init(struct rhashtable *ht, ht->p.min_size = max_t(u16, ht->p.min_size, HASH_MIN_SIZE); - if (params->nelem_hint) - size = rounded_hashtable_size(&ht->p); + size = rounded_hashtable_size(&ht->p); if (params->locks_mul) ht->p.locks_mul = roundup_pow_of_two(params->locks_mul); -- cgit v1.2.3 From 676bcfece19f83621e905aa55b5ed2d45cc4f2d3 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 16 Jul 2018 20:59:58 -0500 Subject: net: cxgb3_main: fix potential Spectre v1 t.qset_idx can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:2286 cxgb_extension_ioctl() warn: potential spectre issue 'adapter->msix_info' Fix this by sanitizing t.qset_idx before using it to index adapter->msix_info Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c index 7b795edd9d3a..a19172dbe6be 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c @@ -51,6 +51,7 @@ #include #include #include +#include #include "common.h" #include "cxgb3_ioctl.h" @@ -2268,6 +2269,7 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr) if (t.qset_idx >= nqsets) return -EINVAL; + t.qset_idx = array_index_nospec(t.qset_idx, nqsets); q = &adapter->params.sge.qset[q1 + t.qset_idx]; t.rspq_size = q->rspq_size; -- cgit v1.2.3 From a5fb9fb023a1435f2b42bccd7f547560f3a21dc3 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Jul 2018 15:40:26 -0500 Subject: PCI: OF: Fix I/O space page leak When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. Introduce the devm_pci_remap_iospace() managed API and replace the pci_remap_iospace() call with it to fix the bug. Fixes: dbf9826d5797 ("PCI: generic: Convert to DT resource parsing API") Signed-off-by: Sergei Shtylyov [lorenzo.pieralisi@arm.com: split commit/updated the commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Linus Walleij --- drivers/pci/of.c | 2 +- drivers/pci/pci.c | 38 ++++++++++++++++++++++++++++++++++++++ include/linux/pci.h | 2 ++ 3 files changed, 41 insertions(+), 1 deletion(-) diff --git a/drivers/pci/of.c b/drivers/pci/of.c index d088c9147f10..69a60d6ebd73 100644 --- a/drivers/pci/of.c +++ b/drivers/pci/of.c @@ -612,7 +612,7 @@ int pci_parse_request_of_pci_ranges(struct device *dev, switch (resource_type(res)) { case IORESOURCE_IO: - err = pci_remap_iospace(res, iobase); + err = devm_pci_remap_iospace(dev, res, iobase); if (err) { dev_warn(dev, "error %d: failed to map resource %pR\n", err, res); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 97acba712e4e..316496e99da9 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3579,6 +3579,44 @@ void pci_unmap_iospace(struct resource *res) } EXPORT_SYMBOL(pci_unmap_iospace); +static void devm_pci_unmap_iospace(struct device *dev, void *ptr) +{ + struct resource **res = ptr; + + pci_unmap_iospace(*res); +} + +/** + * devm_pci_remap_iospace - Managed pci_remap_iospace() + * @dev: Generic device to remap IO address for + * @res: Resource describing the I/O space + * @phys_addr: physical address of range to be mapped + * + * Managed pci_remap_iospace(). Map is automatically unmapped on driver + * detach. + */ +int devm_pci_remap_iospace(struct device *dev, const struct resource *res, + phys_addr_t phys_addr) +{ + const struct resource **ptr; + int error; + + ptr = devres_alloc(devm_pci_unmap_iospace, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return -ENOMEM; + + error = pci_remap_iospace(res, phys_addr); + if (error) { + devres_free(ptr); + } else { + *ptr = res; + devres_add(dev, ptr); + } + + return error; +} +EXPORT_SYMBOL(devm_pci_remap_iospace); + /** * devm_pci_remap_cfgspace - Managed pci_remap_cfgspace() * @dev: Generic device to remap IO address for diff --git a/include/linux/pci.h b/include/linux/pci.h index 340029b2fb38..abd5d5e17aee 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1240,6 +1240,8 @@ int pci_register_io_range(struct fwnode_handle *fwnode, phys_addr_t addr, unsigned long pci_address_to_pio(phys_addr_t addr); phys_addr_t pci_pio_to_address(unsigned long pio); int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr); +int devm_pci_remap_iospace(struct device *dev, const struct resource *res, + phys_addr_t phys_addr); void pci_unmap_iospace(struct resource *res); void __iomem *devm_pci_remap_cfgspace(struct device *dev, resource_size_t offset, -- cgit v1.2.3 From 5c968f48021a9b3faa61ac2543cfab32461c0e05 Mon Sep 17 00:00:00 2001 From: Alexander Couzens Date: Tue, 17 Jul 2018 13:17:09 +0200 Subject: net: usb: asix: replace mii_nway_restart in resume path mii_nway_restart is not pm aware which results in a rtnl deadlock. Implement mii_nway_restart manual by setting BMCR_ANRESTART if BMCR_ANENABLE is set. To reproduce: * plug an asix based usb network interface * wait until the device enters PM (~5 sec) * `ip link set eth1 up` will never return Fixes: d9fe64e51114 ("net: asix: Add in_pm parameter") Signed-off-by: Alexander Couzens Signed-off-by: David S. Miller --- drivers/net/usb/asix_devices.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 3d4f7959dabb..b1b3d8f7e67d 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -642,10 +642,12 @@ static void ax88772_restore_phy(struct usbnet *dev) priv->presvd_phy_advertise); /* Restore BMCR */ + if (priv->presvd_phy_bmcr & BMCR_ANENABLE) + priv->presvd_phy_bmcr |= BMCR_ANRESTART; + asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_BMCR, priv->presvd_phy_bmcr); - mii_nway_restart(&dev->mii); priv->presvd_phy_advertise = 0; priv->presvd_phy_bmcr = 0; } -- cgit v1.2.3 From 53189183909f392c2aff1177565eabbfc48b8524 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Tue, 17 Jul 2018 20:58:14 +0800 Subject: net: sched: Using NULL instead of plain integer Fixes the following sparse warnings: net/sched/cls_api.c:1101:43: warning: Using plain integer as NULL pointer net/sched/cls_api.c:1492:75: warning: Using plain integer as NULL pointer Signed-off-by: YueHaibing Signed-off-by: David S. Miller --- net/sched/cls_api.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index cdc3c87c53e6..f74513a7c7a8 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -1053,7 +1053,7 @@ static void tfilter_notify_chain(struct net *net, struct sk_buff *oskb, for (tp = rtnl_dereference(chain->filter_chain); tp; tp = rtnl_dereference(tp->next)) tfilter_notify(net, oskb, n, tp, block, - q, parent, 0, event, false); + q, parent, NULL, event, false); } static int tc_new_tfilter(struct sk_buff *skb, struct nlmsghdr *n, @@ -1444,7 +1444,7 @@ static bool tcf_chain_dump(struct tcf_chain *chain, struct Qdisc *q, u32 parent, memset(&cb->args[1], 0, sizeof(cb->args) - sizeof(cb->args[0])); if (cb->args[1] == 0) { - if (tcf_fill_node(net, skb, tp, block, q, parent, 0, + if (tcf_fill_node(net, skb, tp, block, q, parent, NULL, NETLINK_CB(cb->skb).portid, cb->nlh->nlmsg_seq, NLM_F_MULTI, RTM_NEWTFILTER) <= 0) -- cgit v1.2.3 From 925652d03589084850023d8924b376b7ee3c1b1b Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Jul 2018 15:40:34 -0500 Subject: PCI: xgene: Fix I/O space page leak When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The X-Gene PCI controller driver has the same issue. Replace pci_remap_iospace() with the devm_ managed version so that the pages get unmapped automagically on any probe failure. Fixes: 5f6b6ccdbe1c ("PCI: xgene: Add APM X-Gene PCIe driver") Signed-off-by: Sergei Shtylyov [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Linus Walleij --- drivers/pci/controller/pci-xgene.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-xgene.c b/drivers/pci/controller/pci-xgene.c index d854d67e873c..ffda3e8b4742 100644 --- a/drivers/pci/controller/pci-xgene.c +++ b/drivers/pci/controller/pci-xgene.c @@ -423,7 +423,7 @@ static int xgene_pcie_map_ranges(struct xgene_pcie_port *port, case IORESOURCE_IO: xgene_pcie_setup_ob_reg(port, res, OMR3BARL, io_base, res->start - window->offset); - ret = pci_remap_iospace(res, io_base); + ret = devm_pci_remap_iospace(dev, res, io_base); if (ret < 0) return ret; break; -- cgit v1.2.3 From 0018b265adf7e251f90d3ca1c7c0e32e2a0ad262 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Jul 2018 15:40:40 -0500 Subject: PCI: versatile: Fix I/O space page leak When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The Versatile PCI controller driver has the same issue. Replace pci_remap_iospace() with the devm_ managed version to fix the bug. Fixes: b7e78170efd4 ("PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver") Signed-off-by: Sergei Shtylyov [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Linus Walleij --- drivers/pci/controller/pci-versatile.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-versatile.c b/drivers/pci/controller/pci-versatile.c index 994f32061b32..f59ad2728c0b 100644 --- a/drivers/pci/controller/pci-versatile.c +++ b/drivers/pci/controller/pci-versatile.c @@ -82,7 +82,7 @@ static int versatile_pci_parse_request_of_pci_ranges(struct device *dev, switch (resource_type(res)) { case IORESOURCE_IO: - err = pci_remap_iospace(res, iobase); + err = devm_pci_remap_iospace(dev, res, iobase); if (err) { dev_warn(dev, "error %d: failed to map resource %pR\n", err, res); -- cgit v1.2.3 From fd07f5e19c6fcdfa318944764248cf44eb06e532 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Jul 2018 15:40:46 -0500 Subject: PCI: designware: Fix I/O space page leak When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver is left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The DesignWare PCIe controller driver has the same issue. Replace devm_pci_remap_iospace() with a devm_ managed version to fix the bug. Fixes: cbce7900598c ("PCI: designware: Make driver arch-agnostic") Signed-off-by: Sergei Shtylyov [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Linus Walleij Acked-by: Jingoo Han --- drivers/pci/controller/dwc/pcie-designware-host.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index 781aa03aeede..29a05759a294 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -363,7 +363,8 @@ int dw_pcie_host_init(struct pcie_port *pp) resource_list_for_each_entry_safe(win, tmp, &bridge->windows) { switch (resource_type(win->res)) { case IORESOURCE_IO: - ret = pci_remap_iospace(win->res, pp->io_base); + ret = devm_pci_remap_iospace(dev, win->res, + pp->io_base); if (ret) { dev_warn(dev, "Error %d: failed to map resource %pR\n", ret, win->res); -- cgit v1.2.3 From 1df3e5b3feebf29a3ecfa0c0f06f79544ca573e4 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Jul 2018 15:40:53 -0500 Subject: PCI: aardvark: Fix I/O space page leak When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The Aardvark PCI controller driver has the same issue. Replace pci_remap_iospace() with its devm_ managed version to fix the bug. Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Sergei Shtylyov [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Thomas Petazzoni Reviewed-by: Linus Walleij --- drivers/pci/controller/pci-aardvark.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c index d3172d5d3d35..0fae816fba39 100644 --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -849,7 +849,7 @@ static int advk_pcie_parse_request_of_pci_ranges(struct advk_pcie *pcie) 0, 0xF8000000, 0, lower_32_bits(res->start), OB_PCIE_IO); - err = pci_remap_iospace(res, iobase); + err = devm_pci_remap_iospace(dev, res, iobase); if (err) { dev_warn(dev, "error %d: failed to map resource %pR\n", err, res); -- cgit v1.2.3 From e30609454b39139a91faf631685f503b7ea3f27d Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Jul 2018 15:40:59 -0500 Subject: PCI: faraday: Fix I/O space page leak When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The Faraday PCI driver has the same issue. Replace pci_remap_iospace() with its devm_ managed version to fix the bug. Fixes: d3c68e0a7e34 ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver") Signed-off-by: Sergei Shtylyov [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Linus Walleij --- drivers/pci/controller/pci-ftpci100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-ftpci100.c b/drivers/pci/controller/pci-ftpci100.c index 20bb2564a6b3..bf5ece5d9291 100644 --- a/drivers/pci/controller/pci-ftpci100.c +++ b/drivers/pci/controller/pci-ftpci100.c @@ -503,7 +503,7 @@ static int faraday_pci_probe(struct platform_device *pdev) dev_err(dev, "illegal IO mem size\n"); return -EINVAL; } - ret = pci_remap_iospace(io, io_base); + ret = devm_pci_remap_iospace(dev, io, io_base); if (ret) { dev_warn(dev, "error %d: failed to map resource %pR\n", ret, io); -- cgit v1.2.3 From 438477b9a089e45ea7c8fb549553e52833117ed8 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Jul 2018 15:41:05 -0500 Subject: PCI: mediatek: Fix I/O space page leak When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The MediaTek PCIe driver has the same issue. Replace devm_pci_remap_iospace() with its devm_ managed counterpart to fix the bug. Fixes: 637cfacae96f ("PCI: mediatek: Add MediaTek PCIe host controller support") Signed-off-by: Sergei Shtylyov [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Linus Walleij --- drivers/pci/controller/pcie-mediatek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c index 0baabe30858f..861dda69f366 100644 --- a/drivers/pci/controller/pcie-mediatek.c +++ b/drivers/pci/controller/pcie-mediatek.c @@ -1109,7 +1109,7 @@ static int mtk_pcie_request_resources(struct mtk_pcie *pcie) if (err < 0) return err; - pci_remap_iospace(&pcie->pio, pcie->io.start); + devm_pci_remap_iospace(dev, &pcie->pio, pcie->io.start); return 0; } -- cgit v1.2.3 From 270ed733e68955049b693bea8f4a1efb293a96ae Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Jul 2018 15:41:11 -0500 Subject: PCI: v3-semi: Fix I/O space page leak When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The V3 Semiconductor PCI driver has the same issue. Replace devm_pci_remap_iospace() with its devm_ managed version to fix the bug. Fixes: 68a15eb7bd0c ("PCI: v3-semi: Add V3 Semiconductor PCI host driver") Signed-off-by: Sergei Shtylyov [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Linus Walleij --- drivers/pci/controller/pci-v3-semi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-v3-semi.c b/drivers/pci/controller/pci-v3-semi.c index 68b8bfbdb867..d219404bad92 100644 --- a/drivers/pci/controller/pci-v3-semi.c +++ b/drivers/pci/controller/pci-v3-semi.c @@ -537,7 +537,7 @@ static int v3_pci_setup_resource(struct v3_pci *v3, v3->io_bus_addr = io->start - win->offset; dev_dbg(dev, "I/O window %pR, bus addr %pap\n", io, &v3->io_bus_addr); - ret = pci_remap_iospace(io, io_base); + ret = devm_pci_remap_iospace(dev, io, io_base); if (ret) { dev_warn(dev, "error %d: failed to map resource %pR\n", -- cgit v1.2.3 From 3ee593adbbb46d9e1bb1320915943926f4744483 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 17 Jul 2018 16:52:54 +0100 Subject: ipv6: sr: fix useless rol32 call on hash The rol32 call is currently rotating hash but the rol'd value is being discarded. I believe the current code is incorrect and hash should be assigned the rotated value returned from rol32. Detected by CoverityScan, CID#1468411 ("Useless call") Fixes: b5facfdba14c ("ipv6: sr: Compute flowlabel for outer IPv6 header of seg6 encap mode") Signed-off-by: Colin Ian King Acked-by: dlebrun@google.com Signed-off-by: David S. Miller --- net/ipv6/seg6_iptunnel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/seg6_iptunnel.c b/net/ipv6/seg6_iptunnel.c index 19ccf0dc996c..a8854dd3e9c5 100644 --- a/net/ipv6/seg6_iptunnel.c +++ b/net/ipv6/seg6_iptunnel.c @@ -101,7 +101,7 @@ static __be32 seg6_make_flowlabel(struct net *net, struct sk_buff *skb, if (do_flowlabel > 0) { hash = skb_get_hash(skb); - rol32(hash, 16); + hash = rol32(hash, 16); flowlabel = (__force __be32)hash & IPV6_FLOWLABEL_MASK; } else if (!do_flowlabel && skb->protocol == htons(ETH_P_IPV6)) { flowlabel = ip6_flowlabel(inner_hdr); -- cgit v1.2.3 From 169dc027fb02492ea37a0575db6a658cf922b854 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 17 Jul 2018 17:12:39 +0100 Subject: ipv6: fix useless rol32 call on hash The rol32 call is currently rotating hash but the rol'd value is being discarded. I believe the current code is incorrect and hash should be assigned the rotated value returned from rol32. Thanks to David Lebrun for spotting this. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- include/net/ipv6.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 7528632bcf2a..8f73be494503 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -823,7 +823,7 @@ static inline __be32 ip6_make_flowlabel(struct net *net, struct sk_buff *skb, * to minimize possbility that any useful information to an * attacker is leaked. Only lower 20 bits are relevant. */ - rol32(hash, 16); + hash = rol32(hash, 16); flowlabel = (__force __be32)hash & IPV6_FLOWLABEL_MASK; -- cgit v1.2.3 From b2bab426dc715de147f8039a3fccff27d795f4eb Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Wed, 18 Jul 2018 08:31:43 +0200 Subject: net: qca_spi: Avoid packet drop during initial sync As long as the synchronization with the QCA7000 isn't finished, we cannot accept packets from the upper layers. So let the SPI thread enable the TX queue after sync and avoid unwanted packet drop. Signed-off-by: Stefan Wahren Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/qca_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c index 5803cd6db406..7db149f90fe3 100644 --- a/drivers/net/ethernet/qualcomm/qca_spi.c +++ b/drivers/net/ethernet/qualcomm/qca_spi.c @@ -658,7 +658,7 @@ qcaspi_netdev_open(struct net_device *dev) return ret; } - netif_start_queue(qca->net_dev); + /* SPI thread takes care of TX queue */ return 0; } -- cgit v1.2.3 From 711c62dfa6bdb4326ca6c587f295ea5c4f7269de Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Wed, 18 Jul 2018 08:31:44 +0200 Subject: net: qca_spi: Make sure the QCA7000 reset is triggered In case the SPI thread is not running, a simple reset of sync state won't fix the transmit timeout. We also need to wake up the kernel thread. Signed-off-by: Stefan Wahren Fixes: ed7d42e24eff ("net: qca_spi: fix transmit queue timeout handling") Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/qca_spi.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c index 7db149f90fe3..7fa815d189ab 100644 --- a/drivers/net/ethernet/qualcomm/qca_spi.c +++ b/drivers/net/ethernet/qualcomm/qca_spi.c @@ -760,6 +760,9 @@ qcaspi_netdev_tx_timeout(struct net_device *dev) qca->net_dev->stats.tx_errors++; /* Trigger tx queue flush and QCA7000 reset */ qca->sync = QCASPI_SYNC_UNKNOWN; + + if (qca->spi_thread) + wake_up_process(qca->spi_thread); } static int -- cgit v1.2.3 From 50973993260a6934f0a00da53d9b746cfbea89ab Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Wed, 18 Jul 2018 08:31:45 +0200 Subject: net: qca_spi: Fix log level if probe fails In cases the probing fails the log level of the messages should be an error. Signed-off-by: Stefan Wahren Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/qca_spi.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c index 7fa815d189ab..206f0266463e 100644 --- a/drivers/net/ethernet/qualcomm/qca_spi.c +++ b/drivers/net/ethernet/qualcomm/qca_spi.c @@ -881,22 +881,22 @@ qca_spi_probe(struct spi_device *spi) if ((qcaspi_clkspeed < QCASPI_CLK_SPEED_MIN) || (qcaspi_clkspeed > QCASPI_CLK_SPEED_MAX)) { - dev_info(&spi->dev, "Invalid clkspeed: %d\n", - qcaspi_clkspeed); + dev_err(&spi->dev, "Invalid clkspeed: %d\n", + qcaspi_clkspeed); return -EINVAL; } if ((qcaspi_burst_len < QCASPI_BURST_LEN_MIN) || (qcaspi_burst_len > QCASPI_BURST_LEN_MAX)) { - dev_info(&spi->dev, "Invalid burst len: %d\n", - qcaspi_burst_len); + dev_err(&spi->dev, "Invalid burst len: %d\n", + qcaspi_burst_len); return -EINVAL; } if ((qcaspi_pluggable < QCASPI_PLUGGABLE_MIN) || (qcaspi_pluggable > QCASPI_PLUGGABLE_MAX)) { - dev_info(&spi->dev, "Invalid pluggable: %d\n", - qcaspi_pluggable); + dev_err(&spi->dev, "Invalid pluggable: %d\n", + qcaspi_pluggable); return -EINVAL; } @@ -958,8 +958,8 @@ qca_spi_probe(struct spi_device *spi) } if (register_netdev(qcaspi_devs)) { - dev_info(&spi->dev, "Unable to register net device %s\n", - qcaspi_devs->name); + dev_err(&spi->dev, "Unable to register net device %s\n", + qcaspi_devs->name); free_netdev(qcaspi_devs); return -EFAULT; } -- cgit v1.2.3 From e40562abdf81f32356218d4196c33f5f93c040f7 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Tue, 17 Jul 2018 18:23:58 +0200 Subject: net: cavium: Add fine-granular dependencies on PCI Add dependencies on PCI where necessary. Fixes: 7e2bc7fb65 ("net: cavium: Drop dependency of NET_VENDOR_CAVIUM on PCI") Signed-off-by: Alexander Sverdlin Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/Kconfig | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/cavium/Kconfig b/drivers/net/ethernet/cavium/Kconfig index 043e3c11c42b..92d88c5f76fb 100644 --- a/drivers/net/ethernet/cavium/Kconfig +++ b/drivers/net/ethernet/cavium/Kconfig @@ -15,7 +15,7 @@ if NET_VENDOR_CAVIUM config THUNDER_NIC_PF tristate "Thunder Physical function driver" - depends on 64BIT + depends on 64BIT && PCI select THUNDER_NIC_BGX ---help--- This driver supports Thunder's NIC physical function. @@ -28,13 +28,13 @@ config THUNDER_NIC_PF config THUNDER_NIC_VF tristate "Thunder Virtual function driver" imply CAVIUM_PTP - depends on 64BIT + depends on 64BIT && PCI ---help--- This driver supports Thunder's NIC virtual function config THUNDER_NIC_BGX tristate "Thunder MAC interface driver (BGX)" - depends on 64BIT + depends on 64BIT && PCI select PHYLIB select MDIO_THUNDER select THUNDER_NIC_RGX @@ -44,7 +44,7 @@ config THUNDER_NIC_BGX config THUNDER_NIC_RGX tristate "Thunder MAC interface driver (RGX)" - depends on 64BIT + depends on 64BIT && PCI select PHYLIB select MDIO_THUNDER ---help--- @@ -53,7 +53,7 @@ config THUNDER_NIC_RGX config CAVIUM_PTP tristate "Cavium PTP coprocessor as PTP clock" - depends on 64BIT + depends on 64BIT && PCI imply PTP_1588_CLOCK default y ---help--- @@ -65,7 +65,7 @@ config CAVIUM_PTP config LIQUIDIO tristate "Cavium LiquidIO support" - depends on 64BIT + depends on 64BIT && PCI depends on MAY_USE_DEVLINK imply PTP_1588_CLOCK select FW_LOADER -- cgit v1.2.3 From a2ec9d14edcd8e92c1d6cd2132d6c9a1dc5d0985 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 17 Jul 2018 18:41:54 +0200 Subject: MAINTAINERS: Drop inactive Vitaly Bordug's email The Vitaly Bordug's email bounces ("ru.mvista.com: Name or service not known") and there was no activity (ack, review, sign) since 2009. Cc: Vitaly Bordug Cc: Pantelis Antoniou Cc: "David S. Miller" Signed-off-by: Krzysztof Kozlowski Signed-off-by: David S. Miller --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0bf83d50aaba..74e3b028dd0c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5789,7 +5789,6 @@ F: include/linux/fsl/ FREESCALE SOC FS_ENET DRIVER M: Pantelis Antoniou -M: Vitaly Bordug L: linuxppc-dev@lists.ozlabs.org L: netdev@vger.kernel.org S: Maintained -- cgit v1.2.3 From 6b81b193b83e87da1ea13217d684b54fccf8ee8a Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Tue, 17 Jul 2018 17:11:13 +0000 Subject: hv_netvsc: Fix napi reschedule while receive completion is busy If out ring is full temporarily and receive completion cannot go out, we may still need to reschedule napi if certain conditions are met. Otherwise the napi poll might be stopped forever, and cause network disconnect. Fixes: 7426b1a51803 ("netvsc: optimize receive completions") Signed-off-by: Stephen Hemminger Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 8e9d0ee1572b..31c3d77b4733 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -1274,6 +1274,7 @@ int netvsc_poll(struct napi_struct *napi, int budget) struct hv_device *device = netvsc_channel_to_device(channel); struct net_device *ndev = hv_get_drvdata(device); int work_done = 0; + int ret; /* If starting a new interval */ if (!nvchan->desc) @@ -1285,16 +1286,18 @@ int netvsc_poll(struct napi_struct *napi, int budget) nvchan->desc = hv_pkt_iter_next(channel, nvchan->desc); } - /* If send of pending receive completions suceeded - * and did not exhaust NAPI budget this time - * and not doing busy poll + /* Send any pending receive completions */ + ret = send_recv_completions(ndev, net_device, nvchan); + + /* If it did not exhaust NAPI budget this time + * and not doing busy poll * then re-enable host interrupts - * and reschedule if ring is not empty. + * and reschedule if ring is not empty + * or sending receive completion failed. */ - if (send_recv_completions(ndev, net_device, nvchan) == 0 && - work_done < budget && + if (work_done < budget && napi_complete_done(napi, work_done) && - hv_end_read(&channel->inbound) && + (ret || hv_end_read(&channel->inbound)) && napi_schedule_prep(napi)) { hv_begin_read(&channel->inbound); __napi_schedule(napi); -- cgit v1.2.3 From 9ba8376ce1e2cbf4ce44f7e4bee1d0648e10d594 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 17 Jul 2018 20:17:33 -0500 Subject: ptp: fix missing break in switch It seems that a *break* is missing in order to avoid falling through to the default case. Otherwise, checking *chan* makes no sense. Fixes: 72df7a7244c0 ("ptp: Allow reassigning calibration pin function") Signed-off-by: Gustavo A. R. Silva Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/ptp/ptp_chardev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ptp/ptp_chardev.c b/drivers/ptp/ptp_chardev.c index 547dbdac9d54..01b0e2bb3319 100644 --- a/drivers/ptp/ptp_chardev.c +++ b/drivers/ptp/ptp_chardev.c @@ -89,6 +89,7 @@ int ptp_set_pinfunc(struct ptp_clock *ptp, unsigned int pin, case PTP_PF_PHYSYNC: if (chan != 0) return -EINVAL; + break; default: return -EINVAL; } -- cgit v1.2.3 From e56b8ce363a36fb7b74b80aaa5cc9084f2c908b4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 17 Jul 2018 18:27:45 -0700 Subject: tcp: identify cryptic messages as TCP seq # bugs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Attempt to make cryptic TCP seq number error messages clearer by (1) identifying the source of the message as "TCP", (2) identifying the errors as "seq # bug", and (3) grouping the field identifiers and values by separating them with commas. E.g., the following message is changed from: recvmsg bug 2: copied 73BCB6CD seq 70F17CBE rcvnxt 73BCB9AA fl 0 WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:1881 tcp_recvmsg+0x649/0xb90 to: TCP recvmsg seq # bug 2: copied 73BCB6CD, seq 70F17CBE, rcvnxt 73BCB9AA, fl 0 WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:2011 tcp_recvmsg+0x694/0xba0 Suggested-by: 積丹尼 Dan Jacobson Signed-off-by: Randy Dunlap Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index ec2186e3087f..4491faf83f4f 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1998,7 +1998,7 @@ int tcp_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, int nonblock, * shouldn't happen. */ if (WARN(before(*seq, TCP_SKB_CB(skb)->seq), - "recvmsg bug: copied %X seq %X rcvnxt %X fl %X\n", + "TCP recvmsg seq # bug: copied %X, seq %X, rcvnxt %X, fl %X\n", *seq, TCP_SKB_CB(skb)->seq, tp->rcv_nxt, flags)) break; @@ -2013,7 +2013,7 @@ int tcp_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, int nonblock, if (TCP_SKB_CB(skb)->tcp_flags & TCPHDR_FIN) goto found_fin_ok; WARN(!(flags & MSG_PEEK), - "recvmsg bug 2: copied %X seq %X rcvnxt %X fl %X\n", + "TCP recvmsg seq # bug 2: copied %X, seq %X, rcvnxt %X, fl %X\n", *seq, TCP_SKB_CB(skb)->seq, tp->rcv_nxt, flags); } -- cgit v1.2.3 From de2d9b5284bcb5c159c5882ac69f6bfd4dec7c67 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Tue, 17 Jul 2018 11:28:46 +0800 Subject: soc: imx: gpc: restrict register range for regmap access GPC registers are NOT continuous, some registers are reserved and accessing them from userspace will trigger external abort, add regmap register access table to avoid below abort: root@imx6slevk:~# cat /sys/kernel/debug/regmap/20dc000.gpc/registers [ 108.480477] Unhandled fault: imprecise external abort (0x1406) at 0xb6db5004 [ 108.487985] pgd = 42b54bfd [ 108.490741] [b6db5004] *pgd=ba1b7831 [ 108.494386] Internal error: : 1406 [#1] SMP ARM [ 108.498943] Modules linked in: [ 108.502043] CPU: 0 PID: 389 Comm: cat Not tainted 4.18.0-rc1-00074-gc9f1f60-dirty #482 [ 108.509982] Hardware name: Freescale i.MX6 SoloLite (Device Tree) [ 108.516123] PC is at regmap_mmio_read32le+0x20/0x24 [ 108.521031] LR is at regmap_mmio_read+0x40/0x60 [ 108.525586] pc : [] lr : [] psr: 20060093 [ 108.531875] sp : eccf1d98 ip : eccf1da8 fp : eccf1da4 [ 108.537122] r10: ec2d3800 r9 : eccf1f60 r8 : ecfc0000 [ 108.542370] r7 : eccf1e2c r6 : eccf1e2c r5 : 00000028 r4 : ec338e00 [ 108.548920] r3 : 00000000 r2 : eccf1e2c r1 : f0980028 r0 : 00000000 [ 108.555474] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 108.562720] Control: 10c5387d Table: acf4004a DAC: 00000051 [ 108.568491] Process cat (pid: 389, stack limit = 0xd4318a65) [ 108.574174] Stack: (0xeccf1d98 to 0xeccf2000) Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver") Signed-off-by: Anson Huang Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- drivers/soc/imx/gpc.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c index 32f0748fd067..0097a939487f 100644 --- a/drivers/soc/imx/gpc.c +++ b/drivers/soc/imx/gpc.c @@ -27,9 +27,16 @@ #define GPC_PGC_SW2ISO_SHIFT 0x8 #define GPC_PGC_SW_SHIFT 0x0 +#define GPC_PGC_PCI_PDN 0x200 +#define GPC_PGC_PCI_SR 0x20c + #define GPC_PGC_GPU_PDN 0x260 #define GPC_PGC_GPU_PUPSCR 0x264 #define GPC_PGC_GPU_PDNSCR 0x268 +#define GPC_PGC_GPU_SR 0x26c + +#define GPC_PGC_DISP_PDN 0x240 +#define GPC_PGC_DISP_SR 0x24c #define GPU_VPU_PUP_REQ BIT(1) #define GPU_VPU_PDN_REQ BIT(0) @@ -318,10 +325,24 @@ static const struct of_device_id imx_gpc_dt_ids[] = { { } }; +static const struct regmap_range yes_ranges[] = { + regmap_reg_range(GPC_CNTR, GPC_CNTR), + regmap_reg_range(GPC_PGC_PCI_PDN, GPC_PGC_PCI_SR), + regmap_reg_range(GPC_PGC_GPU_PDN, GPC_PGC_GPU_SR), + regmap_reg_range(GPC_PGC_DISP_PDN, GPC_PGC_DISP_SR), +}; + +static const struct regmap_access_table access_table = { + .yes_ranges = yes_ranges, + .n_yes_ranges = ARRAY_SIZE(yes_ranges), +}; + static const struct regmap_config imx_gpc_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, + .rd_table = &access_table, + .wr_table = &access_table, .max_register = 0x2ac, }; -- cgit v1.2.3 From 2f958e8240be28acee26085ba1686b4321ba4306 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 18 Jul 2018 16:10:58 +1000 Subject: drm/nouveau/fb/gp100-: disable address remapper This was causing problems on a system with a large amount of RAM, where display push buffers were being fetched incorrectly when placed in high system memory addresses. While this commit will resolve the issue on that particular system, the issue will be avoided completely with another patch to more fully solve problems with display and large amounts of system memory on Pascal. It's still probably a good idea to disable this to prevent weird issues in the future. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvkm/subdev/fb/base.c | 3 +++ drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp100.c | 9 +++++++++ drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp102.c | 1 + drivers/gpu/drm/nouveau/nvkm/subdev/fb/priv.h | 2 ++ 4 files changed, 15 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/base.c index 73b5d46104bd..434d2fc5bb1c 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/base.c @@ -140,6 +140,9 @@ nvkm_fb_init(struct nvkm_subdev *subdev) if (fb->func->init) fb->func->init(fb); + if (fb->func->init_remapper) + fb->func->init_remapper(fb); + if (fb->func->init_page) { ret = fb->func->init_page(fb); if (WARN_ON(ret)) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp100.c b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp100.c index dffe1f5e1071..8205ce436b3e 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp100.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp100.c @@ -36,6 +36,14 @@ gp100_fb_init_unkn(struct nvkm_fb *base) nvkm_wr32(device, 0x1faccc, nvkm_rd32(device, 0x100ccc)); } +void +gp100_fb_init_remapper(struct nvkm_fb *fb) +{ + struct nvkm_device *device = fb->subdev.device; + /* Disable address remapper. */ + nvkm_mask(device, 0x100c14, 0x00040000, 0x00000000); +} + void gp100_fb_init(struct nvkm_fb *base) { @@ -56,6 +64,7 @@ gp100_fb = { .dtor = gf100_fb_dtor, .oneinit = gf100_fb_oneinit, .init = gp100_fb_init, + .init_remapper = gp100_fb_init_remapper, .init_page = gm200_fb_init_page, .init_unkn = gp100_fb_init_unkn, .ram_new = gp100_ram_new, diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp102.c b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp102.c index b84b9861ef26..b4d74e815674 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp102.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp102.c @@ -31,6 +31,7 @@ gp102_fb = { .dtor = gf100_fb_dtor, .oneinit = gf100_fb_oneinit, .init = gp100_fb_init, + .init_remapper = gp100_fb_init_remapper, .init_page = gm200_fb_init_page, .ram_new = gp100_ram_new, }; diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/priv.h b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/priv.h index 2857f31466bf..1e4ad61c19e1 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/priv.h +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/priv.h @@ -11,6 +11,7 @@ struct nvkm_fb_func { u32 (*tags)(struct nvkm_fb *); int (*oneinit)(struct nvkm_fb *); void (*init)(struct nvkm_fb *); + void (*init_remapper)(struct nvkm_fb *); int (*init_page)(struct nvkm_fb *); void (*init_unkn)(struct nvkm_fb *); void (*intr)(struct nvkm_fb *); @@ -69,5 +70,6 @@ int gf100_fb_init_page(struct nvkm_fb *); int gm200_fb_init_page(struct nvkm_fb *); +void gp100_fb_init_remapper(struct nvkm_fb *); void gp100_fb_init_unkn(struct nvkm_fb *); #endif -- cgit v1.2.3 From bd3599a0e142cd73edd3b6801068ac3f48ac771a Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Thu, 12 Jul 2018 01:36:43 +0100 Subject: Btrfs: fix file data corruption after cloning a range and fsync When we clone a range into a file we can end up dropping existing extent maps (or trimming them) and replacing them with new ones if the range to be cloned overlaps with a range in the destination inode. When that happens we add the new extent maps to the list of modified extents in the inode's extent map tree, so that a "fast" fsync (the flag BTRFS_INODE_NEEDS_FULL_SYNC not set in the inode) will see the extent maps and log corresponding extent items. However, at the end of range cloning operation we do truncate all the pages in the affected range (in order to ensure future reads will not get stale data). Sometimes this truncation will release the corresponding extent maps besides the pages from the page cache. If this happens, then a "fast" fsync operation will miss logging some extent items, because it relies exclusively on the extent maps being present in the inode's extent tree, leading to data loss/corruption if the fsync ends up using the same transaction used by the clone operation (that transaction was not committed in the meanwhile). An extent map is released through the callback btrfs_invalidatepage(), which gets called by truncate_inode_pages_range(), and it calls __btrfs_releasepage(). The later ends up calling try_release_extent_mapping() which will release the extent map if some conditions are met, like the file size being greater than 16Mb, gfp flags allow blocking and the range not being locked (which is the case during the clone operation) nor being the extent map flagged as pinned (also the case for cloning). The following example, turned into a test for fstests, reproduces the issue: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ xfs_io -f -c "pwrite -S 0x18 9000K 6908K" /mnt/foo $ xfs_io -f -c "pwrite -S 0x20 2572K 156K" /mnt/bar $ xfs_io -c "fsync" /mnt/bar # reflink destination offset corresponds to the size of file bar, # 2728Kb minus 4Kb. $ xfs_io -c ""reflink ${SCRATCH_MNT}/foo 0 2724K 15908K" /mnt/bar $ xfs_io -c "fsync" /mnt/bar $ md5sum /mnt/bar 95a95813a8c2abc9aa75a6c2914a077e /mnt/bar $ mount /dev/sdb /mnt $ md5sum /mnt/bar 207fd8d0b161be8a84b945f0df8d5f8d /mnt/bar # digest should be 95a95813a8c2abc9aa75a6c2914a077e like before the # power failure In the above example, the destination offset of the clone operation corresponds to the size of the "bar" file minus 4Kb. So during the clone operation, the extent map covering the range from 2572Kb to 2728Kb gets trimmed so that it ends at offset 2724Kb, and a new extent map covering the range from 2724Kb to 11724Kb is created. So at the end of the clone operation when we ask to truncate the pages in the range from 2724Kb to 2724Kb + 15908Kb, the page invalidation callback ends up removing the new extent map (through try_release_extent_mapping()) when the page at offset 2724Kb is passed to that callback. Fix this by setting the bit BTRFS_INODE_NEEDS_FULL_SYNC whenever an extent map is removed at try_release_extent_mapping(), forcing the next fsync to search for modified extents in the fs/subvolume tree instead of relying on the presence of extent maps in memory. This way we can continue doing a "fast" fsync if the destination range of a clone operation does not overlap with an existing range or if any of the criteria necessary to remove an extent map at try_release_extent_mapping() is not met (file size not bigger then 16Mb or gfp flags do not allow blocking). CC: stable@vger.kernel.org # 3.16+ Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/extent_io.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 1aa91d57404a..8fd86e29085f 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -4241,8 +4241,9 @@ int try_release_extent_mapping(struct page *page, gfp_t mask) struct extent_map *em; u64 start = page_offset(page); u64 end = start + PAGE_SIZE - 1; - struct extent_io_tree *tree = &BTRFS_I(page->mapping->host)->io_tree; - struct extent_map_tree *map = &BTRFS_I(page->mapping->host)->extent_tree; + struct btrfs_inode *btrfs_inode = BTRFS_I(page->mapping->host); + struct extent_io_tree *tree = &btrfs_inode->io_tree; + struct extent_map_tree *map = &btrfs_inode->extent_tree; if (gfpflags_allow_blocking(mask) && page->mapping->host->i_size > SZ_16M) { @@ -4265,6 +4266,8 @@ int try_release_extent_mapping(struct page *page, gfp_t mask) extent_map_end(em) - 1, EXTENT_LOCKED | EXTENT_WRITEBACK, 0, NULL)) { + set_bit(BTRFS_INODE_NEEDS_FULL_SYNC, + &btrfs_inode->runtime_flags); remove_extent_mapping(map, em); /* once for the rb tree */ free_extent_map(em); -- cgit v1.2.3 From 2c4d6baf1bc4f7729773ffcee9ba2a9781578633 Mon Sep 17 00:00:00 2001 From: "Robin H. Johnson" Date: Fri, 13 Jul 2018 20:50:47 +0000 Subject: ACPI / EC: Use ec_no_wakeup on more Thinkpad X1 Carbon 6th systems The ec_no_wakeup matcher added for Thinkpad X1 Carbon 6th gen systems beyond matched only a single DMI model (20KGS3JF01), that didn't cover my laptop (20KH002JUS). Change to match based on DMI product family to cover all X1 6th gen systems. Signed-off-by: Robin H. Johnson Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 442a9e24f439..917f77f4cb55 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -2042,7 +2042,7 @@ static const struct dmi_system_id acpi_ec_no_wakeup[] = { .ident = "Thinkpad X1 Carbon 6th", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_NAME, "20KGS3JF01"), + DMI_MATCH(DMI_PRODUCT_FAMILY, "Thinkpad X1 Carbon 6th"), }, }, { }, -- cgit v1.2.3 From af1fc5baa724c63ce1733dfcf855bad5ef6078e3 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 17 Jul 2018 15:21:56 -0700 Subject: ARCv2: [plat-hsdk]: Save accl reg pair by default This manifsted as strace segfaulting on HSDK because gcc was targetting the accumulator registers as GPRs, which kernek was not saving/restoring by default. Cc: stable@vger.kernel.org #4.14+ Signed-off-by: Vineet Gupta --- arch/arc/Kconfig | 2 +- arch/arc/plat-hsdk/Kconfig | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index d76bf4a83740..bc0bcf01ec98 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -408,7 +408,7 @@ config ARC_HAS_DIV_REM config ARC_HAS_ACCL_REGS bool "Reg Pair ACCL:ACCH (FPU and/or MPY > 6)" - default n + default y help Depending on the configuration, CPU can contain accumulator reg-pair (also referred to as r58:r59). These can also be used by gcc as GPR so diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig index 556bc5ef1257..9356753c2ed8 100644 --- a/arch/arc/plat-hsdk/Kconfig +++ b/arch/arc/plat-hsdk/Kconfig @@ -7,6 +7,8 @@ menuconfig ARC_SOC_HSDK bool "ARC HS Development Kit SOC" + depends on ISA_ARCV2 + select ARC_HAS_ACCL_REGS select CLK_HSDK select RESET_HSDK select MIGHT_HAVE_PCI -- cgit v1.2.3 From e01a06c8089132bb4da035c6a83df23916ca3ebf Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 19 Jul 2018 21:38:23 +0200 Subject: ARM: dts: imx6: RDU2: fix irq type for mv88e6xxx switch MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Marvell switches report their interrupts in a level sensitive way. When using edge sensitive detection a race condition in the interrupt handler of the swich might result in the OS to miss all future events which might make the switch non-functional. The problem is that both mv88e6xxx_g2_irq_thread_fn() and mv88e6xxx_g1_irq_thread_work() sample the irq cause register (MV88E6XXX_G2_INT_SRC and MV88E6XXX_G1_STS respectively) once and then handle the observed sources. If after sampling but before all observed irq sources are handled a new irq source gets active this is not noticed by the handler which returns unsuspecting, but the interrupt line stays active which prevents the edge detector to kick in. All device trees but imx6qdl-zii-rdu2 get this right (most of them by not specifying an interrupt parent). So fix imx6qdl-zii-rdu2 accordingly. Signed-off-by: Uwe Kleine-König Fixes: f64992d1a916 ("ARM: dts: imx6: RDU2: Add Switch interrupts") Reviewed-by: Andrew Lunn Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 19a075aee19e..f14df0baf2ab 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -692,7 +692,7 @@ dsa,member = <0 0>; eeprom-length = <512>; interrupt-parent = <&gpio6>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; -- cgit v1.2.3 From 2db1581e1f432ac6b4efe152c57fdfb4de85c154 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Sun, 8 Jul 2018 14:23:21 +0800 Subject: Revert "iommu/vt-d: Clean up pasid quirk for pre-production devices" This reverts commit ab96746aaa344fb720a198245a837e266fad3b62. The commit ab96746aaa34 ("iommu/vt-d: Clean up pasid quirk for pre-production devices") triggers ECS mode on some platforms which have broken ECS support. As the result, graphic device will be inoperable on boot. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107017 Cc: Ashok Raj Signed-off-by: Lu Baolu Signed-off-by: Joerg Roedel --- drivers/iommu/intel-iommu.c | 32 ++++++++++++++++++++++++++++++-- include/linux/intel-iommu.h | 1 + 2 files changed, 31 insertions(+), 2 deletions(-) diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index b344a883f116..115ff26e9ced 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -484,14 +484,37 @@ static int dmar_forcedac; static int intel_iommu_strict; static int intel_iommu_superpage = 1; static int intel_iommu_ecs = 1; +static int intel_iommu_pasid28; static int iommu_identity_mapping; #define IDENTMAP_ALL 1 #define IDENTMAP_GFX 2 #define IDENTMAP_AZALIA 4 -#define ecs_enabled(iommu) (intel_iommu_ecs && ecap_ecs(iommu->ecap)) -#define pasid_enabled(iommu) (ecs_enabled(iommu) && ecap_pasid(iommu->ecap)) +/* Broadwell and Skylake have broken ECS support — normal so-called "second + * level" translation of DMA requests-without-PASID doesn't actually happen + * unless you also set the NESTE bit in an extended context-entry. Which of + * course means that SVM doesn't work because it's trying to do nested + * translation of the physical addresses it finds in the process page tables, + * through the IOVA->phys mapping found in the "second level" page tables. + * + * The VT-d specification was retroactively changed to change the definition + * of the capability bits and pretend that Broadwell/Skylake never happened... + * but unfortunately the wrong bit was changed. It's ECS which is broken, but + * for some reason it was the PASID capability bit which was redefined (from + * bit 28 on BDW/SKL to bit 40 in future). + * + * So our test for ECS needs to eschew those implementations which set the old + * PASID capabiity bit 28, since those are the ones on which ECS is broken. + * Unless we are working around the 'pasid28' limitations, that is, by putting + * the device into passthrough mode for normal DMA and thus masking the bug. + */ +#define ecs_enabled(iommu) (intel_iommu_ecs && ecap_ecs(iommu->ecap) && \ + (intel_iommu_pasid28 || !ecap_broken_pasid(iommu->ecap))) +/* PASID support is thus enabled if ECS is enabled and *either* of the old + * or new capability bits are set. */ +#define pasid_enabled(iommu) (ecs_enabled(iommu) && \ + (ecap_pasid(iommu->ecap) || ecap_broken_pasid(iommu->ecap))) int intel_iommu_gfx_mapped; EXPORT_SYMBOL_GPL(intel_iommu_gfx_mapped); @@ -554,6 +577,11 @@ static int __init intel_iommu_setup(char *str) printk(KERN_INFO "Intel-IOMMU: disable extended context table support\n"); intel_iommu_ecs = 0; + } else if (!strncmp(str, "pasid28", 7)) { + printk(KERN_INFO + "Intel-IOMMU: enable pre-production PASID support\n"); + intel_iommu_pasid28 = 1; + iommu_identity_mapping |= IDENTMAP_GFX; } else if (!strncmp(str, "tboot_noforce", 13)) { printk(KERN_INFO "Intel-IOMMU: not forcing on after tboot. This could expose security risk for tboot\n"); diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index 1df940196ab2..ef169d67df92 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -121,6 +121,7 @@ #define ecap_srs(e) ((e >> 31) & 0x1) #define ecap_ers(e) ((e >> 30) & 0x1) #define ecap_prs(e) ((e >> 29) & 0x1) +#define ecap_broken_pasid(e) ((e >> 28) & 0x1) #define ecap_dis(e) ((e >> 27) & 0x1) #define ecap_nest(e) ((e >> 26) & 0x1) #define ecap_mts(e) ((e >> 25) & 0x1) -- cgit v1.2.3 From 2502e5a025935b7b476b69eda4959b3c4022c72b Mon Sep 17 00:00:00 2001 From: Damien Thébault Date: Wed, 18 Jul 2018 12:06:01 +0200 Subject: platform/x86: dell-laptop: Fix backlight detection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix return code check for "max brightness" ACPI call. The Dell laptop ACPI video brightness control is not present on dell laptops anymore, but was present in older kernel versions. The code that checks the return value is incorrect since the SMM refactoring. The old code was: if (buffer->output[0] == 0) Which was changed to: ret = dell_send_request(...) if (ret) However, dell_send_request() will return 0 if buffer->output[0] == 0, so we must change the check to: if (ret == 0) This issue was found on a Dell M4800 laptop, and the fix tested on it as well. Fixes: 549b4930f057 ("dell-smbios: Introduce dispatcher for SMM calls") Signed-off-by: Damien Thébault Tested-by: Damien Thébault Reviewed-by: Pali Rohár Reviewed-by: Mario Limonciello Signed-off-by: Andy Shevchenko --- drivers/platform/x86/dell-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index f1fa8612db40..06978c14c83b 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -2185,7 +2185,7 @@ static int __init dell_init(void) dell_fill_request(&buffer, token->location, 0, 0, 0); ret = dell_send_request(&buffer, CLASS_TOKEN_READ, SELECT_TOKEN_AC); - if (ret) + if (ret == 0) max_intensity = buffer.output[3]; } -- cgit v1.2.3 From 9b382768135ee3ff282f828c906574a8478e036b Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 19 Jul 2018 20:07:59 -0700 Subject: nvme: fix handling of metadata_len for NVME_IOCTL_IO_CMD The old code in nvme_user_cmd() passed the userspace virtual address from nvme_passthru_cmd.metadata as the length of the metadata buffer as well as the address to nvme_submit_user_cmd(). Fixes: 63263d60 ("nvme: Use metadata for passthrough commands") Signed-off-by: Roland Dreier Reviewed-by: Keith Busch Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 57f33733237f..bf65501e6ed6 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1233,7 +1233,7 @@ static int nvme_user_cmd(struct nvme_ctrl *ctrl, struct nvme_ns *ns, effects = nvme_passthru_start(ctrl, ns, cmd.opcode); status = nvme_submit_user_cmd(ns ? ns->queue : ctrl->admin_q, &c, (void __user *)(uintptr_t)cmd.addr, cmd.data_len, - (void __user *)(uintptr_t)cmd.metadata, cmd.metadata, + (void __user *)(uintptr_t)cmd.metadata, cmd.metadata_len, 0, &cmd.result, timeout); nvme_passthru_end(ctrl, effects); -- cgit v1.2.3 From 1937367205d930deafb11c387b0a71dd215254d5 Mon Sep 17 00:00:00 2001 From: Mathieu Malaterre Date: Fri, 20 Jul 2018 17:53:31 -0700 Subject: mm/memblock: add missing include Commit 26f09e9b3a06 ("mm/memblock: add memblock memory allocation apis") introduced two new function definitions: memblock_virt_alloc_try_nid_nopanic() memblock_virt_alloc_try_nid() and commit ea1f5f3712af ("mm: define memblock_virt_alloc_try_nid_raw") introduced the following function definition: memblock_virt_alloc_try_nid_raw() This commit adds an include of header file to provide the missing function prototypes. This silences the following gcc warning (W=1): mm/memblock.c:1334:15: warning: no previous prototype for `memblock_virt_alloc_try_nid_raw' [-Wmissing-prototypes] mm/memblock.c:1371:15: warning: no previous prototype for `memblock_virt_alloc_try_nid_nopanic' [-Wmissing-prototypes] mm/memblock.c:1407:15: warning: no previous prototype for `memblock_virt_alloc_try_nid' [-Wmissing-prototypes] Also adds #ifdef blockers to prevent compilation failure on mips/ia64 where CONFIG_NO_BOOTMEM=n as could be seen in commit commit 6cc22dc08a24 ("revert "mm/memblock: add missing include ""). Because Makefile already does: obj-$(CONFIG_HAVE_MEMBLOCK) += memblock.o The #ifdef has been simplified from: #if defined(CONFIG_HAVE_MEMBLOCK) && defined(CONFIG_NO_BOOTMEM) to simply: #if defined(CONFIG_NO_BOOTMEM) Link: http://lkml.kernel.org/r/20180626184422.24974-1-malat@debian.org Signed-off-by: Mathieu Malaterre Suggested-by: Tony Luck Suggested-by: Michal Hocko Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memblock.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/memblock.c b/mm/memblock.c index 11e46f83e1ad..4b5d245fafc1 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -1225,6 +1226,7 @@ phys_addr_t __init memblock_alloc_try_nid(phys_addr_t size, phys_addr_t align, i return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE); } +#if defined(CONFIG_NO_BOOTMEM) /** * memblock_virt_alloc_internal - allocate boot memory block * @size: size of memory block to be allocated in bytes @@ -1432,6 +1434,7 @@ void * __init memblock_virt_alloc_try_nid( (u64)max_addr); return NULL; } +#endif /** * __memblock_free_early - free boot memory block -- cgit v1.2.3 From 5a6964944cdfe83de849a5f748f51c983f9914ec Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Fri, 20 Jul 2018 17:53:38 -0700 Subject: MAINTAINERS: Peter has moved Update my E-mail address in the MAINTAINERS file. Link: http://lkml.kernel.org/r/20180710144702.1308-1-peter.senna@gmail.com Signed-off-by: Peter Senna Tschudin Reviewed-by: Sebastian Reichel Acked-by: Martyn Welch Cc: David S. Miller Cc: Mauro Carvalho Chehab Cc: Greg Kroah-Hartman Cc: Randy Dunlap Cc: Martin Donnelly Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 1505c8ea8e7b..0fe4228f78cb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9074,7 +9074,7 @@ S: Maintained F: drivers/usb/mtu3/ MEGACHIPS STDPXXXX-GE-B850V3-FW LVDS/DP++ BRIDGES -M: Peter Senna Tschudin +M: Peter Senna Tschudin M: Martin Donnelly M: Martyn Welch S: Maintained -- cgit v1.2.3 From 35033ab988c396ad7bce3b6d24060c16a9066db8 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Fri, 20 Jul 2018 17:53:42 -0700 Subject: fat: fix memory allocation failure handling of match_strdup() In parse_options(), if match_strdup() failed, parse_options() leaves opts->iocharset in unexpected state (i.e. still pointing the freed string). And this can be the cause of double free. To fix, this initialize opts->iocharset always when freeing. Link: http://lkml.kernel.org/r/8736wp9dzc.fsf@mail.parknet.co.jp Signed-off-by: OGAWA Hirofumi Reported-by: syzbot+90b8e10515ae88228a92@syzkaller.appspotmail.com Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/inode.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/fs/fat/inode.c b/fs/fat/inode.c index 065dc919a0ce..bfd589ea74c0 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -707,13 +707,21 @@ static void fat_set_state(struct super_block *sb, brelse(bh); } +static void fat_reset_iocharset(struct fat_mount_options *opts) +{ + if (opts->iocharset != fat_default_iocharset) { + /* Note: opts->iocharset can be NULL here */ + kfree(opts->iocharset); + opts->iocharset = fat_default_iocharset; + } +} + static void delayed_free(struct rcu_head *p) { struct msdos_sb_info *sbi = container_of(p, struct msdos_sb_info, rcu); unload_nls(sbi->nls_disk); unload_nls(sbi->nls_io); - if (sbi->options.iocharset != fat_default_iocharset) - kfree(sbi->options.iocharset); + fat_reset_iocharset(&sbi->options); kfree(sbi); } @@ -1132,7 +1140,7 @@ static int parse_options(struct super_block *sb, char *options, int is_vfat, opts->fs_fmask = opts->fs_dmask = current_umask(); opts->allow_utime = -1; opts->codepage = fat_default_codepage; - opts->iocharset = fat_default_iocharset; + fat_reset_iocharset(opts); if (is_vfat) { opts->shortname = VFAT_SFN_DISPLAY_WINNT|VFAT_SFN_CREATE_WIN95; opts->rodir = 0; @@ -1289,8 +1297,7 @@ static int parse_options(struct super_block *sb, char *options, int is_vfat, /* vfat specific */ case Opt_charset: - if (opts->iocharset != fat_default_iocharset) - kfree(opts->iocharset); + fat_reset_iocharset(opts); iocharset = match_strdup(&args[0]); if (!iocharset) return -ENOMEM; @@ -1881,8 +1888,7 @@ out_fail: iput(fat_inode); unload_nls(sbi->nls_io); unload_nls(sbi->nls_disk); - if (sbi->options.iocharset != fat_default_iocharset) - kfree(sbi->options.iocharset); + fat_reset_iocharset(&sbi->options); sb->s_fs_info = NULL; kfree(sbi); return error; -- cgit v1.2.3 From e1f1b1572e8db87a56609fd05bef76f98f0e456a Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Fri, 20 Jul 2018 17:53:45 -0700 Subject: mm/huge_memory.c: fix data loss when splitting a file pmd __split_huge_pmd_locked() must check if the cleared huge pmd was dirty, and propagate that to PageDirty: otherwise, data may be lost when a huge tmpfs page is modified then split then reclaimed. How has this taken so long to be noticed? Because there was no problem when the huge page is written by a write system call (shmem_write_end() calls set_page_dirty()), nor when the page is allocated for a write fault (fault_dirty_shared_page() calls set_page_dirty()); but when allocated for a read fault (which MAP_POPULATE simulates), no set_page_dirty(). Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1807111741430.1106@eggly.anvils Fixes: d21b9e57c74c ("thp: handle file pages in split_huge_pmd()") Signed-off-by: Hugh Dickins Reported-by: Ashwin Chaugule Reviewed-by: Yang Shi Reviewed-by: Kirill A. Shutemov Cc: "Huang, Ying" Cc: [4.8+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/huge_memory.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 1cd7c1a57a14..25346bd99364 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -2084,6 +2084,8 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd, if (vma_is_dax(vma)) return; page = pmd_page(_pmd); + if (!PageDirty(page) && pmd_dirty(_pmd)) + set_page_dirty(page); if (!PageReferenced(page) && pmd_young(_pmd)) SetPageReferenced(page); page_remove_rmap(page, true); -- cgit v1.2.3 From 9f15bde671355c351cf20d9f879004b234353100 Mon Sep 17 00:00:00 2001 From: Jing Xia Date: Fri, 20 Jul 2018 17:53:48 -0700 Subject: mm: memcg: fix use after free in mem_cgroup_iter() It was reported that a kernel crash happened in mem_cgroup_iter(), which can be triggered if the legacy cgroup-v1 non-hierarchical mode is used. Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b8f ...... Call trace: mem_cgroup_iter+0x2e0/0x6d4 shrink_zone+0x8c/0x324 balance_pgdat+0x450/0x640 kswapd+0x130/0x4b8 kthread+0xe8/0xfc ret_from_fork+0x10/0x20 mem_cgroup_iter(): ...... if (css_tryget(css)) <-- crash here break; ...... The crashing reason is that mem_cgroup_iter() uses the memcg object whose pointer is stored in iter->position, which has been freed before and filled with POISON_FREE(0x6b). And the root cause of the use-after-free issue is that invalidate_reclaim_iterators() fails to reset the value of iter->position to NULL when the css of the memcg is released in non- hierarchical mode. Link: http://lkml.kernel.org/r/1531994807-25639-1-git-send-email-jing.xia@unisoc.com Fixes: 6df38689e0e9 ("mm: memcontrol: fix possible memcg leak due to interrupted reclaim") Signed-off-by: Jing Xia Acked-by: Michal Hocko Cc: Johannes Weiner Cc: Vladimir Davydov Cc: Cc: Shakeel Butt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index e6f0d5ef320a..8c0280b3143e 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -850,7 +850,7 @@ static void invalidate_reclaim_iterators(struct mem_cgroup *dead_memcg) int nid; int i; - while ((memcg = parent_mem_cgroup(memcg))) { + for (; memcg; memcg = parent_mem_cgroup(memcg)) { for_each_node(nid) { mz = mem_cgroup_nodeinfo(memcg, nid); for (i = 0; i <= DEF_PRIORITY; i++) { -- cgit v1.2.3 From 3928d4f5ee37cdc523894f6e549e6aae521d8980 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 21 Jul 2018 13:48:51 -0700 Subject: mm: use helper functions for allocating and freeing vm_area structs The vm_area_struct is one of the most fundamental memory management objects, but the management of it is entirely open-coded evertwhere, ranging from allocation and freeing (using kmem_cache_[z]alloc and kmem_cache_free) to initializing all the fields. We want to unify this in order to end up having some unified initialization of the vmas, and the first step to this is to at least have basic allocation functions. Right now those functions are literally just wrappers around the kmem_cache_*() calls. This is a purely mechanical conversion: # new vma: kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL) -> vm_area_alloc() # copy old vma kmem_cache_alloc(vm_area_cachep, GFP_KERNEL) -> vm_area_dup(old) # free vma kmem_cache_free(vm_area_cachep, vma) -> vm_area_free(vma) to the point where the old vma passed in to the vm_area_dup() function isn't even used yet (because I've left all the old manual initialization alone). Signed-off-by: Linus Torvalds --- arch/ia64/kernel/perfmon.c | 4 ++-- arch/ia64/mm/init.c | 8 ++++---- fs/exec.c | 4 ++-- include/linux/mm.h | 4 +++- kernel/fork.c | 21 ++++++++++++++++++--- mm/mmap.c | 22 +++++++++++----------- mm/nommu.c | 8 ++++---- 7 files changed, 44 insertions(+), 27 deletions(-) diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 3b38c717008a..e859246badca 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -2278,7 +2278,7 @@ pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t DPRINT(("smpl_buf @%p\n", smpl_buf)); /* allocate vma */ - vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + vma = vm_area_alloc(); if (!vma) { DPRINT(("Cannot allocate vma\n")); goto error_kmem; @@ -2346,7 +2346,7 @@ pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t return 0; error: - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); error_kmem: pfm_rvfree(smpl_buf, size); diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 18278b448530..3f2321bffb72 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -114,7 +114,7 @@ ia64_init_addr_space (void) * the problem. When the process attempts to write to the register backing store * for the first time, it will get a SEGFAULT in this case. */ - vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + vma = vm_area_alloc(); if (vma) { INIT_LIST_HEAD(&vma->anon_vma_chain); vma->vm_mm = current->mm; @@ -125,7 +125,7 @@ ia64_init_addr_space (void) down_write(¤t->mm->mmap_sem); if (insert_vm_struct(current->mm, vma)) { up_write(¤t->mm->mmap_sem); - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); return; } up_write(¤t->mm->mmap_sem); @@ -133,7 +133,7 @@ ia64_init_addr_space (void) /* map NaT-page at address zero to speed up speculative dereferencing of NULL: */ if (!(current->personality & MMAP_PAGE_ZERO)) { - vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + vma = vm_area_alloc(); if (vma) { INIT_LIST_HEAD(&vma->anon_vma_chain); vma->vm_mm = current->mm; @@ -144,7 +144,7 @@ ia64_init_addr_space (void) down_write(¤t->mm->mmap_sem); if (insert_vm_struct(current->mm, vma)) { up_write(¤t->mm->mmap_sem); - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); return; } up_write(¤t->mm->mmap_sem); diff --git a/fs/exec.c b/fs/exec.c index 2d4e0075bd24..9bd83989ea25 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -290,7 +290,7 @@ static int __bprm_mm_init(struct linux_binprm *bprm) struct vm_area_struct *vma = NULL; struct mm_struct *mm = bprm->mm; - bprm->vma = vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + bprm->vma = vma = vm_area_alloc(); if (!vma) return -ENOMEM; @@ -326,7 +326,7 @@ err: up_write(&mm->mmap_sem); err_free: bprm->vma = NULL; - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); return err; } diff --git a/include/linux/mm.h b/include/linux/mm.h index 3982c83fdcbf..de2fd86c6154 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -155,7 +155,9 @@ extern int overcommit_kbytes_handler(struct ctl_table *, int, void __user *, * mmap() functions). */ -extern struct kmem_cache *vm_area_cachep; +struct vm_area_struct *vm_area_alloc(void); +struct vm_area_struct *vm_area_dup(struct vm_area_struct *); +void vm_area_free(struct vm_area_struct *); #ifndef CONFIG_MMU extern struct rb_root nommu_region_tree; diff --git a/kernel/fork.c b/kernel/fork.c index 9440d61b925c..0e23deb5acfc 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -303,11 +303,26 @@ struct kmem_cache *files_cachep; struct kmem_cache *fs_cachep; /* SLAB cache for vm_area_struct structures */ -struct kmem_cache *vm_area_cachep; +static struct kmem_cache *vm_area_cachep; /* SLAB cache for mm_struct structures (tsk->mm) */ static struct kmem_cache *mm_cachep; +struct vm_area_struct *vm_area_alloc(void) +{ + return kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); +} + +struct vm_area_struct *vm_area_dup(struct vm_area_struct *orig) +{ + return kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); +} + +void vm_area_free(struct vm_area_struct *vma) +{ + kmem_cache_free(vm_area_cachep, vma); +} + static void account_kernel_stack(struct task_struct *tsk, int account) { void *stack = task_stack_page(tsk); @@ -455,7 +470,7 @@ static __latent_entropy int dup_mmap(struct mm_struct *mm, goto fail_nomem; charge = len; } - tmp = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + tmp = vm_area_dup(mpnt); if (!tmp) goto fail_nomem; *tmp = *mpnt; @@ -539,7 +554,7 @@ fail_uprobe_end: fail_nomem_anon_vma_fork: mpol_put(vma_policy(tmp)); fail_nomem_policy: - kmem_cache_free(vm_area_cachep, tmp); + vm_area_free(tmp); fail_nomem: retval = -ENOMEM; vm_unacct_memory(charge); diff --git a/mm/mmap.c b/mm/mmap.c index 5801b5f0a634..4286ad2dd1f5 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -182,7 +182,7 @@ static struct vm_area_struct *remove_vma(struct vm_area_struct *vma) if (vma->vm_file) fput(vma->vm_file); mpol_put(vma_policy(vma)); - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); return next; } @@ -911,7 +911,7 @@ again: anon_vma_merge(vma, next); mm->map_count--; mpol_put(vma_policy(next)); - kmem_cache_free(vm_area_cachep, next); + vm_area_free(next); /* * In mprotect's case 6 (see comments on vma_merge), * we must remove another next too. It would clutter @@ -1729,7 +1729,7 @@ unsigned long mmap_region(struct file *file, unsigned long addr, * specific mapper. the address has already been validated, but * not unmapped, but the maps are removed from the list. */ - vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + vma = vm_area_alloc(); if (!vma) { error = -ENOMEM; goto unacct_error; @@ -1832,7 +1832,7 @@ allow_write_and_free_vma: if (vm_flags & VM_DENYWRITE) allow_write_access(file); free_vma: - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); unacct_error: if (charged) vm_unacct_memory(charged); @@ -2620,7 +2620,7 @@ int __split_vma(struct mm_struct *mm, struct vm_area_struct *vma, return err; } - new = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + new = vm_area_dup(vma); if (!new) return -ENOMEM; @@ -2669,7 +2669,7 @@ int __split_vma(struct mm_struct *mm, struct vm_area_struct *vma, out_free_mpol: mpol_put(vma_policy(new)); out_free_vma: - kmem_cache_free(vm_area_cachep, new); + vm_area_free(new); return err; } @@ -2984,7 +2984,7 @@ static int do_brk_flags(unsigned long addr, unsigned long len, unsigned long fla /* * create a vma struct for an anonymous mapping */ - vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + vma = vm_area_alloc(); if (!vma) { vm_unacct_memory(len >> PAGE_SHIFT); return -ENOMEM; @@ -3202,7 +3202,7 @@ struct vm_area_struct *copy_vma(struct vm_area_struct **vmap, } *need_rmap_locks = (new_vma->vm_pgoff <= vma->vm_pgoff); } else { - new_vma = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + new_vma = vm_area_dup(vma); if (!new_vma) goto out; *new_vma = *vma; @@ -3226,7 +3226,7 @@ struct vm_area_struct *copy_vma(struct vm_area_struct **vmap, out_free_mempol: mpol_put(vma_policy(new_vma)); out_free_vma: - kmem_cache_free(vm_area_cachep, new_vma); + vm_area_free(new_vma); out: return NULL; } @@ -3350,7 +3350,7 @@ static struct vm_area_struct *__install_special_mapping( int ret; struct vm_area_struct *vma; - vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + vma = vm_area_alloc(); if (unlikely(vma == NULL)) return ERR_PTR(-ENOMEM); @@ -3376,7 +3376,7 @@ static struct vm_area_struct *__install_special_mapping( return vma; out: - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); return ERR_PTR(ret); } diff --git a/mm/nommu.c b/mm/nommu.c index 4452d8bd9ae4..006e3fe65017 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -769,7 +769,7 @@ static void delete_vma(struct mm_struct *mm, struct vm_area_struct *vma) if (vma->vm_file) fput(vma->vm_file); put_nommu_region(vma->vm_region); - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); } /* @@ -1204,7 +1204,7 @@ unsigned long do_mmap(struct file *file, if (!region) goto error_getting_region; - vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + vma = vm_area_alloc(); if (!vma) goto error_getting_vma; @@ -1368,7 +1368,7 @@ error: kmem_cache_free(vm_region_jar, region); if (vma->vm_file) fput(vma->vm_file); - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); return ret; sharing_violation: @@ -1469,7 +1469,7 @@ int split_vma(struct mm_struct *mm, struct vm_area_struct *vma, if (!region) return -ENOMEM; - new = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + new = vm_area_dup(vma); if (!new) { kmem_cache_free(vm_region_jar, region); return -ENOMEM; -- cgit v1.2.3 From 95faf6992df468f617edb788da8c21c6eed0dfa7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 21 Jul 2018 14:48:45 -0700 Subject: mm: make vm_area_dup() actually copy the old vma data .. and re-initialize th eanon_vma_chain head. This removes some boiler-plate from the users, and also makes it clear why it didn't need use the 'zalloc()' version. Signed-off-by: Linus Torvalds --- kernel/fork.c | 10 +++++++--- mm/mmap.c | 7 ------- mm/nommu.c | 1 - 3 files changed, 7 insertions(+), 11 deletions(-) diff --git a/kernel/fork.c b/kernel/fork.c index 0e23deb5acfc..67253e41bfb0 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -315,7 +315,13 @@ struct vm_area_struct *vm_area_alloc(void) struct vm_area_struct *vm_area_dup(struct vm_area_struct *orig) { - return kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + struct vm_area_struct *new = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + + if (new) { + *new = *orig; + INIT_LIST_HEAD(&new->anon_vma_chain); + } + return new; } void vm_area_free(struct vm_area_struct *vma) @@ -473,8 +479,6 @@ static __latent_entropy int dup_mmap(struct mm_struct *mm, tmp = vm_area_dup(mpnt); if (!tmp) goto fail_nomem; - *tmp = *mpnt; - INIT_LIST_HEAD(&tmp->anon_vma_chain); retval = vma_dup_policy(mpnt, tmp); if (retval) goto fail_nomem_policy; diff --git a/mm/mmap.c b/mm/mmap.c index 4286ad2dd1f5..b0ed8ce1b67e 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -2624,11 +2624,6 @@ int __split_vma(struct mm_struct *mm, struct vm_area_struct *vma, if (!new) return -ENOMEM; - /* most fields are the same, copy all, and then fixup */ - *new = *vma; - - INIT_LIST_HEAD(&new->anon_vma_chain); - if (new_below) new->vm_end = addr; else { @@ -3205,13 +3200,11 @@ struct vm_area_struct *copy_vma(struct vm_area_struct **vmap, new_vma = vm_area_dup(vma); if (!new_vma) goto out; - *new_vma = *vma; new_vma->vm_start = addr; new_vma->vm_end = addr + len; new_vma->vm_pgoff = pgoff; if (vma_dup_policy(vma, new_vma)) goto out_free_vma; - INIT_LIST_HEAD(&new_vma->anon_vma_chain); if (anon_vma_clone(new_vma, vma)) goto out_free_mempol; if (new_vma->vm_file) diff --git a/mm/nommu.c b/mm/nommu.c index 006e3fe65017..c2560e9cc803 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1476,7 +1476,6 @@ int split_vma(struct mm_struct *mm, struct vm_area_struct *vma, } /* most fields are the same, copy all, and then fixup */ - *new = *vma; *region = *vma->vm_region; new->vm_region = region; -- cgit v1.2.3 From 490fc053865c9cc40f1085ef8a5504f5341f79d2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 21 Jul 2018 15:24:03 -0700 Subject: mm: make vm_area_alloc() initialize core fields Like vm_area_dup(), it initializes the anon_vma_chain head, and the basic mm pointer. The rest of the fields end up being different for different users, although the plan is to also initialize the 'vm_ops' field to a dummy entry. Signed-off-by: Linus Torvalds --- arch/ia64/kernel/perfmon.c | 4 +--- arch/ia64/mm/init.c | 8 ++------ fs/exec.c | 4 +--- include/linux/mm.h | 2 +- kernel/fork.c | 10 ++++++++-- mm/mmap.c | 12 +++--------- mm/nommu.c | 3 +-- 7 files changed, 17 insertions(+), 26 deletions(-) diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index e859246badca..46bff1661836 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -2278,17 +2278,15 @@ pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t DPRINT(("smpl_buf @%p\n", smpl_buf)); /* allocate vma */ - vma = vm_area_alloc(); + vma = vm_area_alloc(mm); if (!vma) { DPRINT(("Cannot allocate vma\n")); goto error_kmem; } - INIT_LIST_HEAD(&vma->anon_vma_chain); /* * partially initialize the vma for the sampling buffer */ - vma->vm_mm = mm; vma->vm_file = get_file(filp); vma->vm_flags = VM_READ|VM_MAYREAD|VM_DONTEXPAND|VM_DONTDUMP; vma->vm_page_prot = PAGE_READONLY; /* XXX may need to change */ diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 3f2321bffb72..bdb14a369137 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -114,10 +114,8 @@ ia64_init_addr_space (void) * the problem. When the process attempts to write to the register backing store * for the first time, it will get a SEGFAULT in this case. */ - vma = vm_area_alloc(); + vma = vm_area_alloc(current->mm); if (vma) { - INIT_LIST_HEAD(&vma->anon_vma_chain); - vma->vm_mm = current->mm; vma->vm_start = current->thread.rbs_bot & PAGE_MASK; vma->vm_end = vma->vm_start + PAGE_SIZE; vma->vm_flags = VM_DATA_DEFAULT_FLAGS|VM_GROWSUP|VM_ACCOUNT; @@ -133,10 +131,8 @@ ia64_init_addr_space (void) /* map NaT-page at address zero to speed up speculative dereferencing of NULL: */ if (!(current->personality & MMAP_PAGE_ZERO)) { - vma = vm_area_alloc(); + vma = vm_area_alloc(current->mm); if (vma) { - INIT_LIST_HEAD(&vma->anon_vma_chain); - vma->vm_mm = current->mm; vma->vm_end = PAGE_SIZE; vma->vm_page_prot = __pgprot(pgprot_val(PAGE_READONLY) | _PAGE_MA_NAT); vma->vm_flags = VM_READ | VM_MAYREAD | VM_IO | diff --git a/fs/exec.c b/fs/exec.c index 9bd83989ea25..72e961a62adb 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -290,7 +290,7 @@ static int __bprm_mm_init(struct linux_binprm *bprm) struct vm_area_struct *vma = NULL; struct mm_struct *mm = bprm->mm; - bprm->vma = vma = vm_area_alloc(); + bprm->vma = vma = vm_area_alloc(mm); if (!vma) return -ENOMEM; @@ -298,7 +298,6 @@ static int __bprm_mm_init(struct linux_binprm *bprm) err = -EINTR; goto err_free; } - vma->vm_mm = mm; /* * Place the stack at the largest stack address the architecture @@ -311,7 +310,6 @@ static int __bprm_mm_init(struct linux_binprm *bprm) vma->vm_start = vma->vm_end - PAGE_SIZE; vma->vm_flags = VM_SOFTDIRTY | VM_STACK_FLAGS | VM_STACK_INCOMPLETE_SETUP; vma->vm_page_prot = vm_get_page_prot(vma->vm_flags); - INIT_LIST_HEAD(&vma->anon_vma_chain); err = insert_vm_struct(mm, vma); if (err) diff --git a/include/linux/mm.h b/include/linux/mm.h index de2fd86c6154..d3a3842316b8 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -155,7 +155,7 @@ extern int overcommit_kbytes_handler(struct ctl_table *, int, void __user *, * mmap() functions). */ -struct vm_area_struct *vm_area_alloc(void); +struct vm_area_struct *vm_area_alloc(struct mm_struct *); struct vm_area_struct *vm_area_dup(struct vm_area_struct *); void vm_area_free(struct vm_area_struct *); diff --git a/kernel/fork.c b/kernel/fork.c index 67253e41bfb0..a191c05e757d 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -308,9 +308,15 @@ static struct kmem_cache *vm_area_cachep; /* SLAB cache for mm_struct structures (tsk->mm) */ static struct kmem_cache *mm_cachep; -struct vm_area_struct *vm_area_alloc(void) +struct vm_area_struct *vm_area_alloc(struct mm_struct *mm) { - return kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + struct vm_area_struct *vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + + if (vma) { + vma->vm_mm = mm; + INIT_LIST_HEAD(&vma->anon_vma_chain); + } + return vma; } struct vm_area_struct *vm_area_dup(struct vm_area_struct *orig) diff --git a/mm/mmap.c b/mm/mmap.c index b0ed8ce1b67e..ff1944d8d458 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1729,19 +1729,17 @@ unsigned long mmap_region(struct file *file, unsigned long addr, * specific mapper. the address has already been validated, but * not unmapped, but the maps are removed from the list. */ - vma = vm_area_alloc(); + vma = vm_area_alloc(mm); if (!vma) { error = -ENOMEM; goto unacct_error; } - vma->vm_mm = mm; vma->vm_start = addr; vma->vm_end = addr + len; vma->vm_flags = vm_flags; vma->vm_page_prot = vm_get_page_prot(vm_flags); vma->vm_pgoff = pgoff; - INIT_LIST_HEAD(&vma->anon_vma_chain); if (file) { if (vm_flags & VM_DENYWRITE) { @@ -2979,14 +2977,12 @@ static int do_brk_flags(unsigned long addr, unsigned long len, unsigned long fla /* * create a vma struct for an anonymous mapping */ - vma = vm_area_alloc(); + vma = vm_area_alloc(mm); if (!vma) { vm_unacct_memory(len >> PAGE_SHIFT); return -ENOMEM; } - INIT_LIST_HEAD(&vma->anon_vma_chain); - vma->vm_mm = mm; vma->vm_start = addr; vma->vm_end = addr + len; vma->vm_pgoff = pgoff; @@ -3343,12 +3339,10 @@ static struct vm_area_struct *__install_special_mapping( int ret; struct vm_area_struct *vma; - vma = vm_area_alloc(); + vma = vm_area_alloc(mm); if (unlikely(vma == NULL)) return ERR_PTR(-ENOMEM); - INIT_LIST_HEAD(&vma->anon_vma_chain); - vma->vm_mm = mm; vma->vm_start = addr; vma->vm_end = addr + len; diff --git a/mm/nommu.c b/mm/nommu.c index c2560e9cc803..1d22fdbf7d7c 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1204,7 +1204,7 @@ unsigned long do_mmap(struct file *file, if (!region) goto error_getting_region; - vma = vm_area_alloc(); + vma = vm_area_alloc(current->mm); if (!vma) goto error_getting_vma; @@ -1212,7 +1212,6 @@ unsigned long do_mmap(struct file *file, region->vm_flags = vm_flags; region->vm_pgoff = pgoff; - INIT_LIST_HEAD(&vma->anon_vma_chain); vma->vm_flags = vm_flags; vma->vm_pgoff = pgoff; -- cgit v1.2.3 From f88a333b44318643282b8acc92af90deda441f5e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 22 Jul 2018 15:07:11 +0100 Subject: alpha: fix osf_wait4() breakage kernel_wait4() expects a userland address for status - it's only rusage that goes as a kernel one (and needs a copyout afterwards) [ Also, fix the prototype of kernel_wait4() to have that __user annotation - Linus ] Fixes: 92ebce5ac55d ("osf_wait4: switch to kernel_wait4()") Cc: stable@kernel.org # v4.13+ Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/alpha/kernel/osf_sys.c | 5 +---- include/linux/sched/task.h | 2 +- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 6e921754c8fc..c210a25dd6da 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -1180,13 +1180,10 @@ SYSCALL_DEFINE2(osf_getrusage, int, who, struct rusage32 __user *, ru) SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options, struct rusage32 __user *, ur) { - unsigned int status = 0; struct rusage r; - long err = kernel_wait4(pid, &status, options, &r); + long err = kernel_wait4(pid, ustatus, options, &r); if (err <= 0) return err; - if (put_user(status, ustatus)) - return -EFAULT; if (!ur) return err; if (put_tv_to_tv32(&ur->ru_utime, &r.ru_utime)) diff --git a/include/linux/sched/task.h b/include/linux/sched/task.h index 5be31eb7b266..108ede99e533 100644 --- a/include/linux/sched/task.h +++ b/include/linux/sched/task.h @@ -75,7 +75,7 @@ extern long _do_fork(unsigned long, unsigned long, unsigned long, int __user *, extern long do_fork(unsigned long, unsigned long, unsigned long, int __user *, int __user *); struct task_struct *fork_idle(int); extern pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); -extern long kernel_wait4(pid_t, int *, int, struct rusage *); +extern long kernel_wait4(pid_t, int __user *, int, struct rusage *); extern void free_task(struct task_struct *tsk); -- cgit v1.2.3 From d72e90f33aa4709ebecc5005562f52335e106a60 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 22 Jul 2018 14:12:20 -0700 Subject: Linux 4.18-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index a89d8a0d3ee1..67d9d20f8564 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 4 PATCHLEVEL = 18 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Merciless Moray # *DOCUMENTATION* -- cgit v1.2.3 From d2753e6b4882a637a0e8fb3b9c2e15f33265300e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 20 Jul 2018 10:39:07 +0200 Subject: perf/x86/amd/ibs: Don't access non-started event Paul Menzel reported the following bug: > Enabling the undefined behavior sanitizer and building GNU/Linux 4.18-rc5+ > (with some unrelated commits) with GCC 8.1.0 from Debian Sid/unstable, the > warning below is shown. > > > [ 2.111913] > > ================================================================================ > > [ 2.111917] UBSAN: Undefined behaviour in arch/x86/events/amd/ibs.c:582:24 > > [ 2.111919] member access within null pointer of type 'struct perf_event' > > [ 2.111926] CPU: 0 PID: 144 Comm: udevadm Not tainted 4.18.0-rc5-00316-g4864b68cedf2 #104 > > [ 2.111928] Hardware name: ASROCK E350M1/E350M1, BIOS TIMELESS 01/01/1970 > > [ 2.111930] Call Trace: > > [ 2.111943] dump_stack+0x55/0x89 > > [ 2.111949] ubsan_epilogue+0xb/0x33 > > [ 2.111953] handle_null_ptr_deref+0x7f/0x90 > > [ 2.111958] __ubsan_handle_type_mismatch_v1+0x55/0x60 > > [ 2.111964] perf_ibs_handle_irq+0x596/0x620 The code dereferences event before checking the STARTED bit. Patch below should cure the issue. The warning should not trigger, if I analyzed the thing correctly. (And Paul's testing confirms this.) Reported-by: Paul Menzel Tested-by: Paul Menzel Signed-off-by: Thomas Gleixner Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Borislav Petkov Cc: Jiri Olsa Cc: Linus Torvalds Cc: Paul Menzel Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Vince Weaver Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1807200958390.1580@nanos.tec.linutronix.de Signed-off-by: Ingo Molnar --- arch/x86/events/amd/ibs.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c index 4b98101209a1..d50bb4dc0650 100644 --- a/arch/x86/events/amd/ibs.c +++ b/arch/x86/events/amd/ibs.c @@ -579,7 +579,7 @@ static int perf_ibs_handle_irq(struct perf_ibs *perf_ibs, struct pt_regs *iregs) { struct cpu_perf_ibs *pcpu = this_cpu_ptr(perf_ibs->pcpu); struct perf_event *event = pcpu->event; - struct hw_perf_event *hwc = &event->hw; + struct hw_perf_event *hwc; struct perf_sample_data data; struct perf_raw_record raw; struct pt_regs regs; @@ -602,6 +602,10 @@ fail: return 0; } + if (WARN_ON_ONCE(!event)) + goto fail; + + hwc = &event->hw; msr = hwc->config_base; buf = ibs_data.regs; rdmsrl(msr, *buf); -- cgit v1.2.3 From 4799f6856fdd38c8078a190eca3288029287cf66 Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Tue, 17 Jul 2018 11:32:37 +0530 Subject: MAINTAINERS: Add Naveen N. Rao as kprobes co-maintainer Naveen has been contributing consistently reviewing and hardening kprobes for some time now. I have not been able to do the same due to other commitments. Signed-off-by: Ananth N Mavinakayanahalli Cc: Naveen N. Rao Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Anil S Keshavamurthy Cc: "David S. Miller" Cc: Masami Hiramatsu Cc: Arnaldo Carvalho de Melo Cc: Namhyung Kim Cc: Jiri Olsa Cc: akpm@linux-foundation.org Cc: mhiramat@kernel.org Link: http://lkml.kernel.org/r/153180735790.1914.15547706781664285286.stgit@thinktux Signed-off-by: Ingo Molnar --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0fe4228f78cb..42a884c1b0f7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7984,7 +7984,7 @@ F: lib/test_kmod.c F: tools/testing/selftests/kmod/ KPROBES -M: Ananth N Mavinakayanahalli +M: Naveen N. Rao M: Anil S Keshavamurthy M: "David S. Miller" M: Masami Hiramatsu -- cgit v1.2.3 From 6cbc304f2f360f25cc8607817239d6f4a2fd3dc5 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 10 May 2018 15:48:41 +0200 Subject: perf/x86/intel: Fix unwind errors from PEBS entries (mk-II) Vince reported the perf_fuzzer giving various unwinder warnings and Josh reported: > Deja vu. Most of these are related to perf PEBS, similar to the > following issue: > > b8000586c90b ("perf/x86/intel: Cure bogus unwind from PEBS entries") > > This is basically the ORC version of that. setup_pebs_sample_data() is > assembling a franken-pt_regs which ORC isn't happy about. RIP is > inconsistent with some of the other registers (like RSP and RBP). And where the previous unwinder only needed BP,SP ORC also requires IP. But we cannot spoof IP because then the sample will get displaced, entirely negating the point of PEBS. So cure the whole thing differently by doing the unwind early; this does however require a means to communicate we did the unwind early. We (ab)use an unused sample_type bit for this, which we set on events that fill out the data->callchain before the normal perf_prepare_sample(). Debugged-by: Josh Poimboeuf Reported-by: Vince Weaver Tested-by: Josh Poimboeuf Tested-by: Prashant Bhole Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Andy Lutomirski Cc: Arnaldo Carvalho de Melo Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/events/intel/core.c | 3 +++ arch/x86/events/intel/ds.c | 25 +++++++++++-------------- include/linux/perf_event.h | 1 + include/uapi/linux/perf_event.h | 2 ++ kernel/events/core.c | 6 ++++-- 5 files changed, 21 insertions(+), 16 deletions(-) diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index 707b2a96e516..86f0c15dcc2d 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -2997,6 +2997,9 @@ static int intel_pmu_hw_config(struct perf_event *event) } if (x86_pmu.pebs_aliases) x86_pmu.pebs_aliases(event); + + if (event->attr.sample_type & PERF_SAMPLE_CALLCHAIN) + event->attr.sample_type |= __PERF_SAMPLE_CALLCHAIN_EARLY; } if (needs_branch_stack(event)) { diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c index 8cf03f101938..8dbba77e0518 100644 --- a/arch/x86/events/intel/ds.c +++ b/arch/x86/events/intel/ds.c @@ -1185,17 +1185,21 @@ static void setup_pebs_sample_data(struct perf_event *event, data->data_src.val = val; } + /* + * We must however always use iregs for the unwinder to stay sane; the + * record BP,SP,IP can point into thin air when the record is from a + * previous PMI context or an (I)RET happend between the record and + * PMI. + */ + if (sample_type & PERF_SAMPLE_CALLCHAIN) + data->callchain = perf_callchain(event, iregs); + /* * We use the interrupt regs as a base because the PEBS record does not * contain a full regs set, specifically it seems to lack segment * descriptors, which get used by things like user_mode(). * * In the simple case fix up only the IP for PERF_SAMPLE_IP. - * - * We must however always use BP,SP from iregs for the unwinder to stay - * sane; the record BP,SP can point into thin air when the record is - * from a previous PMI context or an (I)RET happend between the record - * and PMI. */ *regs = *iregs; @@ -1214,15 +1218,8 @@ static void setup_pebs_sample_data(struct perf_event *event, regs->si = pebs->si; regs->di = pebs->di; - /* - * Per the above; only set BP,SP if we don't need callchains. - * - * XXX: does this make sense? - */ - if (!(sample_type & PERF_SAMPLE_CALLCHAIN)) { - regs->bp = pebs->bp; - regs->sp = pebs->sp; - } + regs->bp = pebs->bp; + regs->sp = pebs->sp; #ifndef CONFIG_X86_32 regs->r8 = pebs->r8; diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 1fa12887ec02..87f6db437e4a 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -1130,6 +1130,7 @@ extern void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct extern struct perf_callchain_entry * get_perf_callchain(struct pt_regs *regs, u32 init_nr, bool kernel, bool user, u32 max_stack, bool crosstask, bool add_mark); +extern struct perf_callchain_entry *perf_callchain(struct perf_event *event, struct pt_regs *regs); extern int get_callchain_buffers(int max_stack); extern void put_callchain_buffers(void); diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index b8e288a1f740..eeb787b1c53c 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -143,6 +143,8 @@ enum perf_event_sample_format { PERF_SAMPLE_PHYS_ADDR = 1U << 19, PERF_SAMPLE_MAX = 1U << 20, /* non-ABI */ + + __PERF_SAMPLE_CALLCHAIN_EARLY = 1ULL << 63, }; /* diff --git a/kernel/events/core.c b/kernel/events/core.c index 8f0434a9951a..cdb32cf8e33c 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -6343,7 +6343,7 @@ static u64 perf_virt_to_phys(u64 virt) static struct perf_callchain_entry __empty_callchain = { .nr = 0, }; -static struct perf_callchain_entry * +struct perf_callchain_entry * perf_callchain(struct perf_event *event, struct pt_regs *regs) { bool kernel = !event->attr.exclude_callchain_kernel; @@ -6382,7 +6382,9 @@ void perf_prepare_sample(struct perf_event_header *header, if (sample_type & PERF_SAMPLE_CALLCHAIN) { int size = 1; - data->callchain = perf_callchain(event, regs); + if (!(sample_type & __PERF_SAMPLE_CALLCHAIN_EARLY)) + data->callchain = perf_callchain(event, regs); + size += data->callchain->nr; header->size += size * sizeof(u64); -- cgit v1.2.3 From 7f635ff187ab6be0b350b3ec06791e376af238ab Mon Sep 17 00:00:00 2001 From: Mathieu Poirier Date: Mon, 16 Jul 2018 17:13:51 -0600 Subject: perf/core: Fix crash when using HW tracing kernel filters In function perf_event_parse_addr_filter(), the path::dentry of each struct perf_addr_filter is left unassigned (as it should be) when the pattern being parsed is related to kernel space. But in function perf_addr_filter_match() the same dentries are given to d_inode() where the value is not expected to be NULL, resulting in the following splat: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 pc : perf_event_mmap+0x2fc/0x5a0 lr : perf_event_mmap+0x2c8/0x5a0 Process uname (pid: 2860, stack limit = 0x000000001cbcca37) Call trace: perf_event_mmap+0x2fc/0x5a0 mmap_region+0x124/0x570 do_mmap+0x344/0x4f8 vm_mmap_pgoff+0xe4/0x110 vm_mmap+0x2c/0x40 elf_map+0x60/0x108 load_elf_binary+0x450/0x12c4 search_binary_handler+0x90/0x290 __do_execve_file.isra.13+0x6e4/0x858 sys_execve+0x3c/0x50 el0_svc_naked+0x30/0x34 This patch is fixing the problem by introducing a new check in function perf_addr_filter_match() to see if the filter's dentry is NULL. Signed-off-by: Mathieu Poirier Signed-off-by: Peter Zijlstra (Intel) Acked-by: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: acme@kernel.org Cc: miklos@szeredi.hu Cc: namhyung@kernel.org Cc: songliubraving@fb.com Fixes: 9511bce9fe8e ("perf/core: Fix bad use of igrab()") Link: http://lkml.kernel.org/r/1531782831-1186-1-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Ingo Molnar --- kernel/events/core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/events/core.c b/kernel/events/core.c index cdb32cf8e33c..eec2d5fb676b 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -7337,6 +7337,10 @@ static bool perf_addr_filter_match(struct perf_addr_filter *filter, struct file *file, unsigned long offset, unsigned long size) { + /* d_inode(NULL) won't be equal to any mapped user-space file */ + if (!filter->path.dentry) + return false; + if (d_inode(filter->path.dentry) != file_inode(file)) return false; -- cgit v1.2.3