From 3282e6b8f89eaeaf4915ee6cc57bcf06d1d6cead Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Wed, 4 May 2016 17:50:59 +0100 Subject: x86/topology: Remove redundant ENABLE_TOPO_DEFINES Commit c8e56d20f2d1 ("x86: Kill CONFIG_X86_HT") removed CONFIG_X86_HT and defined ENABLE_TOPO_DEFINES always if CONFIG_SMP, which makes ENABLE_TOPO_DEFINES redundant. This patch removes the redundant ENABLE_TOPO_DEFINES and instead uses CONFIG_SMP directly Signed-off-by: Sudeep Holla Acked-by: Borislav Petkov Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1462380659-5968-1-git-send-email-sudeep.holla@arm.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/topology.h | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index 7f991bd5031b..c9a4ed73aef4 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -25,16 +25,6 @@ #ifndef _ASM_X86_TOPOLOGY_H #define _ASM_X86_TOPOLOGY_H -#ifdef CONFIG_X86_32 -# ifdef CONFIG_SMP -# define ENABLE_TOPO_DEFINES -# endif -#else -# ifdef CONFIG_SMP -# define ENABLE_TOPO_DEFINES -# endif -#endif - /* * to preserve the visibility of NUMA_NO_NODE definition, * moved to there from here. May be used independent of @@ -123,7 +113,7 @@ extern const struct cpumask *cpu_coregroup_mask(int cpu); #define topology_physical_package_id(cpu) (cpu_data(cpu).phys_proc_id) #define topology_core_id(cpu) (cpu_data(cpu).cpu_core_id) -#ifdef ENABLE_TOPO_DEFINES +#ifdef CONFIG_SMP #define topology_core_cpumask(cpu) (per_cpu(cpu_core_map, cpu)) #define topology_sibling_cpumask(cpu) (per_cpu(cpu_sibling_map, cpu)) -- cgit v1.2.3 From f0133acc7d4835cfbb86393b7d2a4fba7519585b Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 8 May 2016 20:58:40 +0200 Subject: x86/cpu: Correct comments and messages in P4 erratum 037 handling code Remove the linebreak in the conditional and s/errata/erratum/ as the singular is "erratum". No functionality change. Signed-off-by: Borislav Petkov Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1462733920-7224-1-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/intel.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index f71a34944b56..5354080f76c3 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -263,15 +263,14 @@ static void intel_workarounds(struct cpuinfo_x86 *c) } /* - * P4 Xeon errata 037 workaround. + * P4 Xeon erratum 037 workaround. * Hardware prefetcher may cause stale data to be loaded into the cache. */ if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) { if (msr_set_bit(MSR_IA32_MISC_ENABLE, - MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT) - > 0) { + MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT) > 0) { pr_info("CPU: C0 stepping P4 Xeon detected.\n"); - pr_info("CPU: Disabling hardware prefetching (Errata 037)\n"); + pr_info("CPU: Disabling hardware prefetching (Erratum 037)\n"); } } -- cgit v1.2.3 From 62d167330679994ec816a4fe6be22f589fcfdf76 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Thu, 2 Jun 2016 17:19:36 -0700 Subject: x86, powercap, rapl: Use Intel model macros intead of open-coding Use the new macros to remove another large set of open-coded values. Signed-off-by: Dave Hansen Acked-by: Rafael J. Wysocki Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: jacob.jun.pan@intel.com Cc: linux-pm@vger.kernel.org Link: http://lkml.kernel.org/r/20160603001936.F474F9D8@viggo.jf.intel.com Signed-off-by: Ingo Molnar --- drivers/powercap/intel_rapl.c | 43 ++++++++++++++++++++++--------------------- 1 file changed, 22 insertions(+), 21 deletions(-) diff --git a/drivers/powercap/intel_rapl.c b/drivers/powercap/intel_rapl.c index b2766b867b0e..defa8d6c27bf 100644 --- a/drivers/powercap/intel_rapl.c +++ b/drivers/powercap/intel_rapl.c @@ -33,6 +33,7 @@ #include #include +#include /* Local defines */ #define MSR_PLATFORM_POWER_LIMIT 0x0000065C @@ -1096,27 +1097,27 @@ static const struct rapl_defaults rapl_defaults_cht = { } static const struct x86_cpu_id rapl_ids[] __initconst = { - RAPL_CPU(0x2a, rapl_defaults_core),/* Sandy Bridge */ - RAPL_CPU(0x2d, rapl_defaults_core),/* Sandy Bridge EP */ - RAPL_CPU(0x37, rapl_defaults_byt),/* Valleyview */ - RAPL_CPU(0x3a, rapl_defaults_core),/* Ivy Bridge */ - RAPL_CPU(0x3c, rapl_defaults_core),/* Haswell */ - RAPL_CPU(0x3d, rapl_defaults_core),/* Broadwell */ - RAPL_CPU(0x3f, rapl_defaults_hsw_server),/* Haswell servers */ - RAPL_CPU(0x4f, rapl_defaults_hsw_server),/* Broadwell servers */ - RAPL_CPU(0x45, rapl_defaults_core),/* Haswell ULT */ - RAPL_CPU(0x46, rapl_defaults_core),/* Haswell */ - RAPL_CPU(0x47, rapl_defaults_core),/* Broadwell-H */ - RAPL_CPU(0x4E, rapl_defaults_core),/* Skylake */ - RAPL_CPU(0x4C, rapl_defaults_cht),/* Braswell/Cherryview */ - RAPL_CPU(0x4A, rapl_defaults_tng),/* Tangier */ - RAPL_CPU(0x56, rapl_defaults_core),/* Future Xeon */ - RAPL_CPU(0x5A, rapl_defaults_ann),/* Annidale */ - RAPL_CPU(0X5C, rapl_defaults_core),/* Broxton */ - RAPL_CPU(0x5E, rapl_defaults_core),/* Skylake-H/S */ - RAPL_CPU(0x57, rapl_defaults_hsw_server),/* Knights Landing */ - RAPL_CPU(0x8E, rapl_defaults_core),/* Kabylake */ - RAPL_CPU(0x9E, rapl_defaults_core),/* Kabylake */ + RAPL_CPU(INTEL_FAM6_SANDYBRIDGE, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_SANDYBRIDGE_X, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_ATOM_SILVERMONT1, rapl_defaults_byt), + RAPL_CPU(INTEL_FAM6_IVYBRIDGE, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_HASWELL_CORE, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_BROADWELL_CORE, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_HASWELL_X, rapl_defaults_hsw_server), + RAPL_CPU(INTEL_FAM6_BROADWELL_X, rapl_defaults_hsw_server), + RAPL_CPU(INTEL_FAM6_HASWELL_ULT, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_HASWELL_GT3E, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_BROADWELL_GT3E, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_SKYLAKE_MOBILE, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_ATOM_AIRMONT, rapl_defaults_cht), + RAPL_CPU(INTEL_FAM6_ATOM_MERRIFIELD1, rapl_defaults_tng), + RAPL_CPU(INTEL_FAM6_BROADWELL_XEON_D, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_ATOM_MERRIFIELD2, rapl_defaults_ann), + RAPL_CPU(INTEL_FAM6_ATOM_GOLDMONT, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_SKYLAKE_DESKTOP, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_XEON_PHI_KNL, rapl_defaults_hsw_server), + RAPL_CPU(INTEL_FAM6_KABYLAKE_MOBILE, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_KABYLAKE_DESKTOP, rapl_defaults_core), {} }; MODULE_DEVICE_TABLE(x86cpu, rapl_ids); -- cgit v1.2.3 From 0bb04b5f2c2452fdf4e1e376421de6bb34485fbb Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Thu, 2 Jun 2016 17:19:37 -0700 Subject: x86, powercap, rapl: Reorder CPU detection table Let's make an effort to group these things by microarchitecture name. It makes it easier to see if something got missed. Signed-off-by: Dave Hansen Acked-by: Rafael J. Wysocki Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: jacob.jun.pan@intel.com Cc: linux-pm@vger.kernel.org Link: http://lkml.kernel.org/r/20160603001937.B53A383A@viggo.jf.intel.com Signed-off-by: Ingo Molnar --- drivers/powercap/intel_rapl.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/powercap/intel_rapl.c b/drivers/powercap/intel_rapl.c index defa8d6c27bf..f4f85323ef78 100644 --- a/drivers/powercap/intel_rapl.c +++ b/drivers/powercap/intel_rapl.c @@ -1099,25 +1099,31 @@ static const struct rapl_defaults rapl_defaults_cht = { static const struct x86_cpu_id rapl_ids[] __initconst = { RAPL_CPU(INTEL_FAM6_SANDYBRIDGE, rapl_defaults_core), RAPL_CPU(INTEL_FAM6_SANDYBRIDGE_X, rapl_defaults_core), - RAPL_CPU(INTEL_FAM6_ATOM_SILVERMONT1, rapl_defaults_byt), + RAPL_CPU(INTEL_FAM6_IVYBRIDGE, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_HASWELL_CORE, rapl_defaults_core), - RAPL_CPU(INTEL_FAM6_BROADWELL_CORE, rapl_defaults_core), - RAPL_CPU(INTEL_FAM6_HASWELL_X, rapl_defaults_hsw_server), - RAPL_CPU(INTEL_FAM6_BROADWELL_X, rapl_defaults_hsw_server), RAPL_CPU(INTEL_FAM6_HASWELL_ULT, rapl_defaults_core), RAPL_CPU(INTEL_FAM6_HASWELL_GT3E, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_HASWELL_X, rapl_defaults_hsw_server), + + RAPL_CPU(INTEL_FAM6_BROADWELL_CORE, rapl_defaults_core), RAPL_CPU(INTEL_FAM6_BROADWELL_GT3E, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_BROADWELL_XEON_D, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_BROADWELL_X, rapl_defaults_hsw_server), + + RAPL_CPU(INTEL_FAM6_SKYLAKE_DESKTOP, rapl_defaults_core), RAPL_CPU(INTEL_FAM6_SKYLAKE_MOBILE, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_KABYLAKE_MOBILE, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_KABYLAKE_DESKTOP, rapl_defaults_core), + + RAPL_CPU(INTEL_FAM6_ATOM_SILVERMONT1, rapl_defaults_byt), RAPL_CPU(INTEL_FAM6_ATOM_AIRMONT, rapl_defaults_cht), RAPL_CPU(INTEL_FAM6_ATOM_MERRIFIELD1, rapl_defaults_tng), - RAPL_CPU(INTEL_FAM6_BROADWELL_XEON_D, rapl_defaults_core), RAPL_CPU(INTEL_FAM6_ATOM_MERRIFIELD2, rapl_defaults_ann), RAPL_CPU(INTEL_FAM6_ATOM_GOLDMONT, rapl_defaults_core), - RAPL_CPU(INTEL_FAM6_SKYLAKE_DESKTOP, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_XEON_PHI_KNL, rapl_defaults_hsw_server), - RAPL_CPU(INTEL_FAM6_KABYLAKE_MOBILE, rapl_defaults_core), - RAPL_CPU(INTEL_FAM6_KABYLAKE_DESKTOP, rapl_defaults_core), {} }; MODULE_DEVICE_TABLE(x86cpu, rapl_ids); -- cgit v1.2.3 From d40671e30cb46e834651e0ce3d4590c915171414 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Thu, 2 Jun 2016 17:19:55 -0700 Subject: x86, powercap, rapl: Add Skylake Server model number SKX uses similar RAPL interface as Broadwell server according to Jacob Pan. Signed-off-by: Dave Hansen Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Jacob Pan Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Rafael J. Wysocki Cc: Thomas Gleixner Cc: jacob.jun.pan@intel.com Cc: linux-pm@vger.kernel.org Link: http://lkml.kernel.org/r/20160603001955.38E1E684@viggo.jf.intel.com Signed-off-by: Ingo Molnar --- drivers/powercap/intel_rapl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/powercap/intel_rapl.c b/drivers/powercap/intel_rapl.c index f4f85323ef78..2e8f2be5b6f9 100644 --- a/drivers/powercap/intel_rapl.c +++ b/drivers/powercap/intel_rapl.c @@ -1114,6 +1114,7 @@ static const struct x86_cpu_id rapl_ids[] __initconst = { RAPL_CPU(INTEL_FAM6_SKYLAKE_DESKTOP, rapl_defaults_core), RAPL_CPU(INTEL_FAM6_SKYLAKE_MOBILE, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_SKYLAKE_X, rapl_defaults_hsw_server), RAPL_CPU(INTEL_FAM6_KABYLAKE_MOBILE, rapl_defaults_core), RAPL_CPU(INTEL_FAM6_KABYLAKE_DESKTOP, rapl_defaults_core), -- cgit v1.2.3 From db73c5a8c80decbb6ddf208e58f3865b4df5384d Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Thu, 2 Jun 2016 17:19:32 -0700 Subject: x86/intel_idle: Use Intel family macros for intel_idle Use the new INTEL_FAM6_* macros for intel_idle.c. Also fix up some of the macros to be consistent with how some of the intel_idle code refers to the model. There's on oddity here: model 0x1F is uniquely referred to here and nowhere else that I could find. 0x1E/0x1F are just spelled out as "Intel Core i7 and i5 Processors" in the SDM or as "Intel processors based on the Nehalem, Westmere microarchitectures" in the RDPMC section. Comments between tables 19-19 and 19-20 in the SDM seem to point to 0x1F being some kind of Westmere, so let's call it "WESTMERE2". Signed-off-by: Dave Hansen Acked-by: Rafael J. Wysocki Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Len Brown Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: jacob.jun.pan@intel.com Cc: linux-pm@vger.kernel.org Link: http://lkml.kernel.org/r/20160603001932.EE978EB9@viggo.jf.intel.com Signed-off-by: Ingo Molnar --- drivers/idle/intel_idle.c | 71 ++++++++++++++++++++++++----------------------- 1 file changed, 36 insertions(+), 35 deletions(-) diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index c96649292b55..b5dd41d13d3d 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -62,6 +62,7 @@ #include #include #include +#include #include #include @@ -1020,38 +1021,38 @@ static const struct idle_cpu idle_cpu_bxt = { { X86_VENDOR_INTEL, 6, model, X86_FEATURE_MWAIT, (unsigned long)&cpu } static const struct x86_cpu_id intel_idle_ids[] __initconst = { - ICPU(0x1a, idle_cpu_nehalem), - ICPU(0x1e, idle_cpu_nehalem), - ICPU(0x1f, idle_cpu_nehalem), - ICPU(0x25, idle_cpu_nehalem), - ICPU(0x2c, idle_cpu_nehalem), - ICPU(0x2e, idle_cpu_nehalem), - ICPU(0x1c, idle_cpu_atom), - ICPU(0x26, idle_cpu_lincroft), - ICPU(0x2f, idle_cpu_nehalem), - ICPU(0x2a, idle_cpu_snb), - ICPU(0x2d, idle_cpu_snb), - ICPU(0x36, idle_cpu_atom), - ICPU(0x37, idle_cpu_byt), - ICPU(0x4c, idle_cpu_cht), - ICPU(0x3a, idle_cpu_ivb), - ICPU(0x3e, idle_cpu_ivt), - ICPU(0x3c, idle_cpu_hsw), - ICPU(0x3f, idle_cpu_hsw), - ICPU(0x45, idle_cpu_hsw), - ICPU(0x46, idle_cpu_hsw), - ICPU(0x4d, idle_cpu_avn), - ICPU(0x3d, idle_cpu_bdw), - ICPU(0x47, idle_cpu_bdw), - ICPU(0x4f, idle_cpu_bdw), - ICPU(0x56, idle_cpu_bdw), - ICPU(0x4e, idle_cpu_skl), - ICPU(0x5e, idle_cpu_skl), - ICPU(0x8e, idle_cpu_skl), - ICPU(0x9e, idle_cpu_skl), - ICPU(0x55, idle_cpu_skx), - ICPU(0x57, idle_cpu_knl), - ICPU(0x5c, idle_cpu_bxt), + ICPU(INTEL_FAM6_NEHALEM_EP, idle_cpu_nehalem), + ICPU(INTEL_FAM6_NEHALEM, idle_cpu_nehalem), + ICPU(INTEL_FAM6_WESTMERE2, idle_cpu_nehalem), + ICPU(INTEL_FAM6_WESTMERE, idle_cpu_nehalem), + ICPU(INTEL_FAM6_WESTMERE_EP, idle_cpu_nehalem), + ICPU(INTEL_FAM6_NEHALEM_EX, idle_cpu_nehalem), + ICPU(INTEL_FAM6_ATOM_PINEVIEW, idle_cpu_atom), + ICPU(INTEL_FAM6_ATOM_LINCROFT, idle_cpu_lincroft), + ICPU(INTEL_FAM6_WESTMERE_EX, idle_cpu_nehalem), + ICPU(INTEL_FAM6_SANDYBRIDGE, idle_cpu_snb), + ICPU(INTEL_FAM6_SANDYBRIDGE_X, idle_cpu_snb), + ICPU(INTEL_FAM6_ATOM_CEDARVIEW, idle_cpu_atom), + ICPU(INTEL_FAM6_ATOM_SILVERMONT1, idle_cpu_byt), + ICPU(INTEL_FAM6_ATOM_AIRMONT, idle_cpu_cht), + ICPU(INTEL_FAM6_IVYBRIDGE, idle_cpu_ivb), + ICPU(INTEL_FAM6_IVYBRIDGE_X, idle_cpu_ivt), + ICPU(INTEL_FAM6_HASWELL_CORE, idle_cpu_hsw), + ICPU(INTEL_FAM6_HASWELL_X, idle_cpu_hsw), + ICPU(INTEL_FAM6_HASWELL_ULT, idle_cpu_hsw), + ICPU(INTEL_FAM6_HASWELL_GT3E, idle_cpu_hsw), + ICPU(INTEL_FAM6_ATOM_SILVERMONT2, idle_cpu_avn), + ICPU(INTEL_FAM6_BROADWELL_CORE, idle_cpu_bdw), + ICPU(INTEL_FAM6_BROADWELL_GT3E, idle_cpu_bdw), + ICPU(INTEL_FAM6_BROADWELL_X, idle_cpu_bdw), + ICPU(INTEL_FAM6_BROADWELL_XEON_D, idle_cpu_bdw), + ICPU(INTEL_FAM6_SKYLAKE_MOBILE, idle_cpu_skl), + ICPU(INTEL_FAM6_SKYLAKE_DESKTOP, idle_cpu_skl), + ICPU(INTEL_FAM6_KABYLAKE_MOBILE, idle_cpu_skl), + ICPU(INTEL_FAM6_KABYLAKE_DESKTOP, idle_cpu_skl), + ICPU(INTEL_FAM6_SKYLAKE_X, idle_cpu_skx), + ICPU(INTEL_FAM6_XEON_PHI_KNL, idle_cpu_knl), + ICPU(INTEL_FAM6_ATOM_GOLDMONT, idle_cpu_bxt), {} }; MODULE_DEVICE_TABLE(x86cpu, intel_idle_ids); @@ -1261,13 +1262,13 @@ static void intel_idle_state_table_update(void) { switch (boot_cpu_data.x86_model) { - case 0x3e: /* IVT */ + case INTEL_FAM6_IVYBRIDGE_X: ivt_idle_state_table_update(); break; - case 0x5c: /* BXT */ + case INTEL_FAM6_ATOM_GOLDMONT: bxt_idle_state_table_update(); break; - case 0x5e: /* SKL-H */ + case INTEL_FAM6_SKYLAKE_DESKTOP: sklh_idle_state_table_update(); break; } -- cgit v1.2.3 From d5e0c89a8ccde900c3245474915ea0f518abdb79 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Thu, 2 Jun 2016 17:19:39 -0700 Subject: x86/platform: Use new Intel model number macros Remove the open-coded model numbers. Signed-off-by: Dave Hansen Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Jacob Pan Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Rafael J. Wysocki Cc: Srinivas Pandruvada Cc: Thomas Gleixner Cc: jacob.jun.pan@intel.com Link: http://lkml.kernel.org/r/20160603001939.D1D7FC2F@viggo.jf.intel.com Signed-off-by: Ingo Molnar --- arch/x86/platform/atom/punit_atom_debug.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/platform/atom/punit_atom_debug.c b/arch/x86/platform/atom/punit_atom_debug.c index 81c769e80614..109782996867 100644 --- a/arch/x86/platform/atom/punit_atom_debug.c +++ b/arch/x86/platform/atom/punit_atom_debug.c @@ -23,6 +23,7 @@ #include #include #include +#include #include /* Power gate status reg */ @@ -143,8 +144,8 @@ static void punit_dbgfs_unregister(void) (kernel_ulong_t)&drv_data } static const struct x86_cpu_id intel_punit_cpu_ids[] = { - ICPU(55, punit_device_byt), /* Valleyview, Bay Trail */ - ICPU(76, punit_device_cht), /* Braswell, Cherry Trail */ + ICPU(INTEL_FAM6_ATOM_SILVERMONT1, punit_device_byt), + ICPU(INTEL_FAM6_ATOM_AIRMONT, punit_device_cht), {} }; -- cgit v1.2.3 From 5b20c944882ce35da0074b9eabe41a172aea030b Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Thu, 2 Jun 2016 17:19:45 -0700 Subject: x86/cpufreq: Use Intel family name macros for the intel_pstate cpufreq driver Another straightforward replacement of magic numbers. Signed-off-by: Dave Hansen Acked-by: Rafael J. Wysocki Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Len Brown Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Srinivas Pandruvada Cc: Thomas Gleixner Cc: Viresh Kumar Cc: jacob.jun.pan@intel.com Cc: linux-pm@vger.kernel.org Link: http://lkml.kernel.org/r/20160603001945.0F5D02AA@viggo.jf.intel.com Signed-off-by: Ingo Molnar --- drivers/cpufreq/intel_pstate.c | 37 +++++++++++++++++++------------------ 1 file changed, 19 insertions(+), 18 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 0d159b513469..9b1f5d73d306 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -35,6 +35,7 @@ #include #include #include +#include #define ATOM_RATIOS 0x66a #define ATOM_VIDS 0x66b @@ -1352,29 +1353,29 @@ static void intel_pstate_update_util(struct update_util_data *data, u64 time, (unsigned long)&policy } static const struct x86_cpu_id intel_pstate_cpu_ids[] = { - ICPU(0x2a, core_params), - ICPU(0x2d, core_params), - ICPU(0x37, silvermont_params), - ICPU(0x3a, core_params), - ICPU(0x3c, core_params), - ICPU(0x3d, core_params), - ICPU(0x3e, core_params), - ICPU(0x3f, core_params), - ICPU(0x45, core_params), - ICPU(0x46, core_params), - ICPU(0x47, core_params), - ICPU(0x4c, airmont_params), - ICPU(0x4e, core_params), - ICPU(0x4f, core_params), - ICPU(0x5e, core_params), - ICPU(0x56, core_params), - ICPU(0x57, knl_params), + ICPU(INTEL_FAM6_SANDYBRIDGE, core_params), + ICPU(INTEL_FAM6_SANDYBRIDGE_X, core_params), + ICPU(INTEL_FAM6_ATOM_SILVERMONT1, silvermont_params), + ICPU(INTEL_FAM6_IVYBRIDGE, core_params), + ICPU(INTEL_FAM6_HASWELL_CORE, core_params), + ICPU(INTEL_FAM6_BROADWELL_CORE, core_params), + ICPU(INTEL_FAM6_IVYBRIDGE_X, core_params), + ICPU(INTEL_FAM6_HASWELL_X, core_params), + ICPU(INTEL_FAM6_HASWELL_ULT, core_params), + ICPU(INTEL_FAM6_HASWELL_GT3E, core_params), + ICPU(INTEL_FAM6_BROADWELL_GT3E, core_params), + ICPU(INTEL_FAM6_ATOM_AIRMONT, airmont_params), + ICPU(INTEL_FAM6_SKYLAKE_MOBILE, core_params), + ICPU(INTEL_FAM6_BROADWELL_X, core_params), + ICPU(INTEL_FAM6_SKYLAKE_DESKTOP, core_params), + ICPU(INTEL_FAM6_BROADWELL_XEON_D, core_params), + ICPU(INTEL_FAM6_XEON_PHI_KNL, knl_params), {} }; MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids); static const struct x86_cpu_id intel_pstate_cpu_oob_ids[] = { - ICPU(0x56, core_params), + ICPU(INTEL_FAM6_BROADWELL_XEON_D, core_params), {} }; -- cgit v1.2.3 From 4626d840a1e0044e6f23d226ea8a5b96bd167636 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Thu, 2 Jun 2016 17:19:46 -0700 Subject: x86/acpi/lss: Use Intel family name macros for the acpi_lpss driver Another straightforward replacement of magic numbers. Signed-off-by: Dave Hansen Acked-by: Rafael J. Wysocki Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Len Brown Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: jacob.jun.pan@intel.com Cc: linux-acpi@vger.kernel.org Link: http://lkml.kernel.org/r/20160603001946.264CE704@viggo.jf.intel.com Signed-off-by: Ingo Molnar --- drivers/acpi/acpi_lpss.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index 0872d5fecb82..357a0b8f860b 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -29,6 +29,7 @@ ACPI_MODULE_NAME("acpi_lpss"); #ifdef CONFIG_X86_INTEL_LPSS #include +#include #include #include @@ -229,8 +230,8 @@ static const struct lpss_device_desc bsw_spi_dev_desc = { #define ICPU(model) { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, } static const struct x86_cpu_id lpss_cpu_ids[] = { - ICPU(0x37), /* Valleyview, Bay Trail */ - ICPU(0x4c), /* Braswell, Cherry Trail */ + ICPU(INTEL_FAM6_ATOM_SILVERMONT1), /* Valleyview, Bay Trail */ + ICPU(INTEL_FAM6_ATOM_AIRMONT), /* Braswell, Cherry Trail */ {} }; -- cgit v1.2.3 From 678dec00a4753b74df8ad6fc5167429b614d1139 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Thu, 2 Jun 2016 17:19:47 -0700 Subject: x86/intel_telemetry: Use Intel family name macros for telemetry driver Another straightforward replacement of magic numbers. Signed-off-by: Dave Hansen Acked-by: Darren Hart Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Souvik Kumar Chakravarty Cc: Thomas Gleixner Cc: jacob.jun.pan@intel.com Cc: platform-driver-x86@vger.kernel.org Link: http://lkml.kernel.org/r/20160603001947.05102C3E@viggo.jf.intel.com Signed-off-by: Ingo Molnar --- drivers/platform/x86/intel_telemetry_debugfs.c | 3 ++- drivers/platform/x86/intel_telemetry_pltdrv.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/intel_telemetry_debugfs.c b/drivers/platform/x86/intel_telemetry_debugfs.c index f5134acd6ff0..815a7c5e9566 100644 --- a/drivers/platform/x86/intel_telemetry_debugfs.c +++ b/drivers/platform/x86/intel_telemetry_debugfs.c @@ -32,6 +32,7 @@ #include #include +#include #include #include #include @@ -331,7 +332,7 @@ static struct telemetry_debugfs_conf telem_apl_debugfs_conf = { }; static const struct x86_cpu_id telemetry_debugfs_cpu_ids[] = { - TELEM_DEBUGFS_CPU(0x5c, telem_apl_debugfs_conf), + TELEM_DEBUGFS_CPU(INTEL_FAM6_ATOM_GOLDMONT, telem_apl_debugfs_conf), {} }; diff --git a/drivers/platform/x86/intel_telemetry_pltdrv.c b/drivers/platform/x86/intel_telemetry_pltdrv.c index 09c84a2b1c2c..6d884f7d1b9f 100644 --- a/drivers/platform/x86/intel_telemetry_pltdrv.c +++ b/drivers/platform/x86/intel_telemetry_pltdrv.c @@ -28,6 +28,7 @@ #include #include +#include #include #include #include @@ -163,7 +164,7 @@ static struct telemetry_plt_config telem_apl_config = { }; static const struct x86_cpu_id telemetry_cpu_ids[] = { - TELEM_CPU(0x5c, telem_apl_config), + TELEM_CPU(INTEL_FAM6_ATOM_GOLDMONT, telem_apl_config), {} }; -- cgit v1.2.3 From 8ba4cb53129c3089f248f1ebeb25128d93c8b5c5 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Thu, 2 Jun 2016 17:19:51 -0700 Subject: x86, mmc: Use Intel family name macros for mmc driver Another straightforward replacement of magic numbers. Signed-off-by: Dave Hansen Acked-by: Adrian Hunter Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Ulf Hansson Cc: jacob.jun.pan@intel.com Cc: linux-mmc@vger.kernel.org Link: http://lkml.kernel.org/r/20160603001951.9EEA53D8@viggo.jf.intel.com Signed-off-by: Ingo Molnar --- drivers/mmc/host/sdhci-acpi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index 458ffb7637e5..008709c5cb09 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -43,6 +43,7 @@ #ifdef CONFIG_X86 #include +#include #include #endif @@ -126,7 +127,7 @@ static const struct sdhci_acpi_chip sdhci_acpi_chip_int = { static bool sdhci_acpi_byt(void) { static const struct x86_cpu_id byt[] = { - { X86_VENDOR_INTEL, 6, 0x37 }, + { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT1 }, {} }; -- cgit v1.2.3 From ce53da02ebfbe93ec58dd6150b28b4606330ead5 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Thu, 2 Jun 2016 17:19:52 -0700 Subject: x86, thermal: Clean up and fix CPU model detection for intel_soc_dts_thermal The X86_FAMILY_ANY in here is bogus. "BYT" and model 0x37 are family-6 only. Signed-off-by: Dave Hansen Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: Eduardo Valentin Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Zhang Rui Cc: jacob.jun.pan@intel.com Cc: linux-pm@vger.kernel.org Link: http://lkml.kernel.org/r/20160603001952.9B6E114D@viggo.jf.intel.com Signed-off-by: Ingo Molnar --- drivers/thermal/intel_soc_dts_thermal.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/intel_soc_dts_thermal.c b/drivers/thermal/intel_soc_dts_thermal.c index 4ebb31a35a64..b2bbaa1c60b0 100644 --- a/drivers/thermal/intel_soc_dts_thermal.c +++ b/drivers/thermal/intel_soc_dts_thermal.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "intel_soc_dts_iosf.h" #define CRITICAL_OFFSET_FROM_TJ_MAX 5000 @@ -42,7 +43,8 @@ static irqreturn_t soc_irq_thread_fn(int irq, void *dev_data) } static const struct x86_cpu_id soc_thermal_ids[] = { - { X86_VENDOR_INTEL, X86_FAMILY_ANY, 0x37, 0, BYT_SOC_DTS_APIC_IRQ}, + { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT1, 0, + BYT_SOC_DTS_APIC_IRQ}, {} }; MODULE_DEVICE_TABLE(x86cpu, soc_thermal_ids); -- cgit v1.2.3 From bb27570525a71f48347ed0e0c265063e7952bb61 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 13 Jun 2016 21:28:00 +0300 Subject: x86/platform/intel_mid_pci: Rework IRQ0 workaround On Intel Merrifield platform several PCI devices have a bogus configuration, i.e. the IRQ0 had been assigned to few of them. These are PCI root bridge, eMMC0, HS UART common registers, PWM, and HDMI. The actual interrupt line can be allocated to one device exclusively, in our case to eMMC0, the rest should cope without it and basically known drivers for them are not using interrupt line at all. Rework IRQ0 workaround, which was previously done to avoid conflict between eMMC0 and HS UART common registers, to behave differently based on the device in question, i.e. allocate interrupt line to eMMC0, but silently skip interrupt allocation for the rest except HS UART common registers which are not used anyway. With this rework IOSF MBI driver in particular would be used. Signed-off-by: Andy Shevchenko Acked-by: Thomas Gleixner Cc: Bjorn Helgaas Cc: Linus Torvalds Cc: Peter Zijlstra Fixes: 39d9b77b8deb ("x86/pci/intel_mid_pci: Work around for IRQ0 assignment") Link: http://lkml.kernel.org/r/1465842481-136852-1-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/pci/intel_mid_pci.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c index 8b93e634af84..ae97f24a4371 100644 --- a/arch/x86/pci/intel_mid_pci.c +++ b/arch/x86/pci/intel_mid_pci.c @@ -37,6 +37,7 @@ /* Quirks for the listed devices */ #define PCI_DEVICE_ID_INTEL_MRFL_MMC 0x1190 +#define PCI_DEVICE_ID_INTEL_MRFL_HSU 0x1191 /* Fixed BAR fields */ #define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00 /* Fixed BAR (TBD) */ @@ -224,14 +225,21 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev) /* Special treatment for IRQ0 */ if (dev->irq == 0) { + /* + * Skip HS UART common registers device since it has + * IRQ0 assigned and not used by the kernel. + */ + if (dev->device == PCI_DEVICE_ID_INTEL_MRFL_HSU) + return -EBUSY; /* * TNG has IRQ0 assigned to eMMC controller. But there * are also other devices with bogus PCI configuration * that have IRQ0 assigned. This check ensures that - * eMMC gets it. + * eMMC gets it. The rest of devices still could be + * enabled without interrupt line being allocated. */ if (dev->device != PCI_DEVICE_ID_INTEL_MRFL_MMC) - return -EBUSY; + return 0; } break; default: -- cgit v1.2.3 From 9485f8b6a75921e1b9e94b001cdb45872a598534 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 13 Jun 2016 21:28:01 +0300 Subject: x86/platform/atom/punit: Enable support for Merrifield Intel Merrifield platform has Punit generation that somehow compatible to what is already supported by punit_atom_debug driver. Add necessary bits to enable that support. Signed-off-by: Andy Shevchenko Acked-by: Thomas Gleixner Cc: Bjorn Helgaas Cc: Linus Torvalds Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1465842481-136852-2-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/platform/atom/punit_atom_debug.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/x86/platform/atom/punit_atom_debug.c b/arch/x86/platform/atom/punit_atom_debug.c index 109782996867..8ff7b9355416 100644 --- a/arch/x86/platform/atom/punit_atom_debug.c +++ b/arch/x86/platform/atom/punit_atom_debug.c @@ -26,8 +26,6 @@ #include #include -/* Power gate status reg */ -#define PWRGT_STATUS 0x61 /* Subsystem config/status Video processor */ #define VED_SS_PM0 0x32 /* Subsystem config/status ISP (Image Signal Processor) */ @@ -36,12 +34,16 @@ #define MIO_SS_PM 0x3B /* Shift bits for getting status for video, isp and i/o */ #define SSS_SHIFT 24 + +/* Power gate status reg */ +#define PWRGT_STATUS 0x61 /* Shift bits for getting status for graphics rendering */ #define RENDER_POS 0 /* Shift bits for getting status for media control */ #define MEDIA_POS 2 /* Shift bits for getting status for Valley View/Baytrail display */ #define VLV_DISPLAY_POS 6 + /* Subsystem config/status display for Cherry Trail SOC */ #define CHT_DSP_SSS 0x36 /* Shift bits for getting status for display */ @@ -53,6 +55,14 @@ struct punit_device { int sss_pos; }; +static const struct punit_device punit_device_tng[] = { + { "DISPLAY", CHT_DSP_SSS, SSS_SHIFT }, + { "VED", VED_SS_PM0, SSS_SHIFT }, + { "ISP", ISP_SS_PM0, SSS_SHIFT }, + { "MIO", MIO_SS_PM, SSS_SHIFT }, + { NULL } +}; + static const struct punit_device punit_device_byt[] = { { "GFX RENDER", PWRGT_STATUS, RENDER_POS }, { "GFX MEDIA", PWRGT_STATUS, MEDIA_POS }, @@ -145,6 +155,7 @@ static void punit_dbgfs_unregister(void) static const struct x86_cpu_id intel_punit_cpu_ids[] = { ICPU(INTEL_FAM6_ATOM_SILVERMONT1, punit_device_byt), + ICPU(INTEL_FAM6_ATOM_MERRIFIELD1, punit_device_tng), ICPU(INTEL_FAM6_ATOM_AIRMONT, punit_device_cht), {} }; -- cgit v1.2.3 From 5823d0893ec284f37902e2ecd332dbb396a143d1 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 14 Jun 2016 21:29:45 +0300 Subject: x86/platform/intel-mid: Add Power Management Unit driver Add Power Management Unit driver to handle power states of South Complex devices on Intel Tangier. In the future it might be expanded to cover North Complex devices as well. With this driver the power state of the host controllers such as SPI, I2C, UART, eMMC, and DMA would be managed. Signed-off-by: Andy Shevchenko Cc: Bjorn Helgaas Cc: David Cohen Cc: Linus Torvalds Cc: Mika Westerberg Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1465928985-12113-1-git-send-email-andriy.shevchenko@linux.intel.com [ Minor readability edits. ] Signed-off-by: Ingo Molnar --- arch/x86/include/asm/intel-mid.h | 8 + arch/x86/pci/intel_mid_pci.c | 40 +++- arch/x86/platform/intel-mid/Makefile | 2 +- arch/x86/platform/intel-mid/pwr.c | 416 +++++++++++++++++++++++++++++++++++ drivers/pci/Makefile | 3 + drivers/pci/pci-mid.c | 77 +++++++ 6 files changed, 540 insertions(+), 6 deletions(-) create mode 100644 arch/x86/platform/intel-mid/pwr.c create mode 100644 drivers/pci/pci-mid.c diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h index 7c5af123bdbd..38498a4fb44f 100644 --- a/arch/x86/include/asm/intel-mid.h +++ b/arch/x86/include/asm/intel-mid.h @@ -12,9 +12,17 @@ #define _ASM_X86_INTEL_MID_H #include +#include #include extern int intel_mid_pci_init(void); +extern int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state); + +#define INTEL_MID_PWR_LSS_OFFSET 4 +#define INTEL_MID_PWR_LSS_TYPE (1 << 7) + +extern int intel_mid_pwr_get_lss_id(struct pci_dev *pdev); + extern int get_gpio_by_name(const char *name); extern void intel_scu_device_register(struct platform_device *pdev); extern int __init sfi_parse_mrtc(struct sfi_table_header *table); diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c index ae97f24a4371..a9710433be4d 100644 --- a/arch/x86/pci/intel_mid_pci.c +++ b/arch/x86/pci/intel_mid_pci.c @@ -316,14 +316,44 @@ static void pci_d3delay_fixup(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup); -static void mrst_power_off_unused_dev(struct pci_dev *dev) +static void mid_power_off_dev(struct pci_dev *dev) { + u16 pmcsr; + + /* + * Update current state first, otherwise PCI core enforces PCI_D0 in + * pci_set_power_state() for devices which status was PCI_UNKNOWN. + */ + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + dev->current_state = (pci_power_t __force)(pmcsr & PCI_PM_CTRL_STATE_MASK); + pci_set_power_state(dev, PCI_D3hot); } -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0801, mrst_power_off_unused_dev); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0809, mrst_power_off_unused_dev); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x080C, mrst_power_off_unused_dev); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0815, mrst_power_off_unused_dev); + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0801, mid_power_off_dev); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0809, mid_power_off_dev); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x080C, mid_power_off_dev); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0815, mid_power_off_dev); + +static void mrfld_power_off_dev(struct pci_dev *dev) +{ + int id; + + if (!pci_soc_mode) + return; + + id = intel_mid_pwr_get_lss_id(dev); + if (id < 0) + return; + + /* + * This sets only PMCSR bits. The actual power off will happen in + * arch/x86/platform/intel-mid/pwr.c. + */ + mid_power_off_dev(dev); +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, mrfld_power_off_dev); /* * Langwell devices reside at fixed offsets, don't try to move them. diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile index 0ce1b1913673..aebb5b9ea80a 100644 --- a/arch/x86/platform/intel-mid/Makefile +++ b/arch/x86/platform/intel-mid/Makefile @@ -1,4 +1,4 @@ -obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o mfld.o mrfl.o +obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o mfld.o mrfl.o pwr.o # SFI specific code ifdef CONFIG_X86_INTEL_MID diff --git a/arch/x86/platform/intel-mid/pwr.c b/arch/x86/platform/intel-mid/pwr.c new file mode 100644 index 000000000000..59faf05d23f5 --- /dev/null +++ b/arch/x86/platform/intel-mid/pwr.c @@ -0,0 +1,416 @@ +/* + * Intel MID Power Management Unit (PWRMU) device driver + * + * Copyright (C) 2016, Intel Corporation + * + * Author: Andy Shevchenko + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * Intel MID Power Management Unit device driver handles the South Complex PCI + * devices such as GPDMA, SPI, I2C, PWM, and so on. By default PCI core + * modifies bits in PMCSR register in the PCI configuration space. This is not + * enough on some SoCs like Intel Tangier. In such case PCI core sets a new + * power state of the device in question through a PM hook registered in struct + * pci_platform_pm_ops (see drivers/pci/pci-mid.c). + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* Registers */ +#define PM_STS 0x00 +#define PM_CMD 0x04 +#define PM_ICS 0x08 +#define PM_WKC(x) (0x10 + (x) * 4) +#define PM_WKS(x) (0x18 + (x) * 4) +#define PM_SSC(x) (0x20 + (x) * 4) +#define PM_SSS(x) (0x30 + (x) * 4) + +/* Bits in PM_STS */ +#define PM_STS_BUSY (1 << 8) + +/* Bits in PM_CMD */ +#define PM_CMD_CMD(x) ((x) << 0) +#define PM_CMD_IOC (1 << 8) +#define PM_CMD_D3cold (1 << 21) + +/* List of commands */ +#define CMD_SET_CFG 0x01 + +/* Bits in PM_ICS */ +#define PM_ICS_INT_STATUS(x) ((x) & 0xff) +#define PM_ICS_IE (1 << 8) +#define PM_ICS_IP (1 << 9) +#define PM_ICS_SW_INT_STS (1 << 10) + +/* List of interrupts */ +#define INT_INVALID 0 +#define INT_CMD_COMPLETE 1 +#define INT_CMD_ERR 2 +#define INT_WAKE_EVENT 3 +#define INT_LSS_POWER_ERR 4 +#define INT_S0iX_MSG_ERR 5 +#define INT_NO_C6 6 +#define INT_TRIGGER_ERR 7 +#define INT_INACTIVITY 8 + +/* South Complex devices */ +#define LSS_MAX_SHARED_DEVS 4 +#define LSS_MAX_DEVS 64 + +#define LSS_WS_BITS 1 /* wake state width */ +#define LSS_PWS_BITS 2 /* power state width */ + +/* Supported device IDs */ +#define PCI_DEVICE_ID_TANGIER 0x11a1 + +struct mid_pwr_dev { + struct pci_dev *pdev; + pci_power_t state; +}; + +struct mid_pwr { + struct device *dev; + void __iomem *regs; + int irq; + bool available; + + struct mutex lock; + struct mid_pwr_dev lss[LSS_MAX_DEVS][LSS_MAX_SHARED_DEVS]; +}; + +static struct mid_pwr *midpwr; + +static u32 mid_pwr_get_state(struct mid_pwr *pwr, int reg) +{ + return readl(pwr->regs + PM_SSS(reg)); +} + +static void mid_pwr_set_state(struct mid_pwr *pwr, int reg, u32 value) +{ + writel(value, pwr->regs + PM_SSC(reg)); +} + +static void mid_pwr_set_wake(struct mid_pwr *pwr, int reg, u32 value) +{ + writel(value, pwr->regs + PM_WKC(reg)); +} + +static void mid_pwr_interrupt_disable(struct mid_pwr *pwr) +{ + writel(~PM_ICS_IE, pwr->regs + PM_ICS); +} + +static bool mid_pwr_is_busy(struct mid_pwr *pwr) +{ + return !!(readl(pwr->regs + PM_STS) & PM_STS_BUSY); +} + +/* Wait 500ms that the latest PWRMU command finished */ +static int mid_pwr_wait(struct mid_pwr *pwr) +{ + unsigned int count = 500000; + bool busy; + + do { + busy = mid_pwr_is_busy(pwr); + if (!busy) + return 0; + udelay(1); + } while (--count); + + return -EBUSY; +} + +static int mid_pwr_wait_for_cmd(struct mid_pwr *pwr, u8 cmd) +{ + writel(PM_CMD_CMD(cmd), pwr->regs + PM_CMD); + return mid_pwr_wait(pwr); +} + +static int __update_power_state(struct mid_pwr *pwr, int reg, int bit, int new) +{ + int curstate; + u32 power; + int ret; + + /* Check if the device is already in desired state */ + power = mid_pwr_get_state(pwr, reg); + curstate = (power >> bit) & 3; + if (curstate == new) + return 0; + + /* Update the power state */ + mid_pwr_set_state(pwr, reg, (power & ~(3 << bit)) | (new << bit)); + + /* Send command to SCU */ + ret = mid_pwr_wait_for_cmd(pwr, CMD_SET_CFG); + if (ret) + return ret; + + /* Check if the device is already in desired state */ + power = mid_pwr_get_state(pwr, reg); + curstate = (power >> bit) & 3; + if (curstate != new) + return -EAGAIN; + + return 0; +} + +static pci_power_t __find_weakest_power_state(struct mid_pwr_dev *lss, + struct pci_dev *pdev, + pci_power_t state) +{ + pci_power_t weakest = PCI_D3hot; + unsigned int j; + + /* Find device in cache or first free cell */ + for (j = 0; j < LSS_MAX_SHARED_DEVS; j++) { + if (lss[j].pdev == pdev || !lss[j].pdev) + break; + } + + /* Store the desired state in cache */ + if (j < LSS_MAX_SHARED_DEVS) { + lss[j].pdev = pdev; + lss[j].state = state; + } else { + dev_WARN(&pdev->dev, "No room for device in PWRMU LSS cache\n"); + weakest = state; + } + + /* Find the power state we may use */ + for (j = 0; j < LSS_MAX_SHARED_DEVS; j++) { + if (lss[j].state < weakest) + weakest = lss[j].state; + } + + return weakest; +} + +static int __set_power_state(struct mid_pwr *pwr, struct pci_dev *pdev, + pci_power_t state, int id, int reg, int bit) +{ + const char *name; + int ret; + + state = __find_weakest_power_state(pwr->lss[id], pdev, state); + name = pci_power_name(state); + + ret = __update_power_state(pwr, reg, bit, (__force int)state); + if (ret) { + dev_warn(&pdev->dev, "Can't set power state %s: %d\n", name, ret); + return ret; + } + + dev_vdbg(&pdev->dev, "Set power state %s\n", name); + return 0; +} + +static int mid_pwr_set_power_state(struct mid_pwr *pwr, struct pci_dev *pdev, + pci_power_t state) +{ + int id, reg, bit; + int ret; + + id = intel_mid_pwr_get_lss_id(pdev); + if (id < 0) + return id; + + reg = (id * LSS_PWS_BITS) / 32; + bit = (id * LSS_PWS_BITS) % 32; + + /* We support states between PCI_D0 and PCI_D3hot */ + if (state < PCI_D0) + state = PCI_D0; + if (state > PCI_D3hot) + state = PCI_D3hot; + + mutex_lock(&pwr->lock); + ret = __set_power_state(pwr, pdev, state, id, reg, bit); + mutex_unlock(&pwr->lock); + return ret; +} + +int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state) +{ + struct mid_pwr *pwr = midpwr; + int ret = 0; + + might_sleep(); + + if (pwr && pwr->available) + ret = mid_pwr_set_power_state(pwr, pdev, state); + dev_vdbg(&pdev->dev, "set_power_state() returns %d\n", ret); + + return 0; +} +EXPORT_SYMBOL_GPL(intel_mid_pci_set_power_state); + +int intel_mid_pwr_get_lss_id(struct pci_dev *pdev) +{ + int vndr; + u8 id; + + /* + * Mapping to PWRMU index is kept in the Logical SubSystem ID byte of + * Vendor capability. + */ + vndr = pci_find_capability(pdev, PCI_CAP_ID_VNDR); + if (!vndr) + return -EINVAL; + + /* Read the Logical SubSystem ID byte */ + pci_read_config_byte(pdev, vndr + INTEL_MID_PWR_LSS_OFFSET, &id); + if (!(id & INTEL_MID_PWR_LSS_TYPE)) + return -ENODEV; + + id &= ~INTEL_MID_PWR_LSS_TYPE; + if (id >= LSS_MAX_DEVS) + return -ERANGE; + + return id; +} + +static irqreturn_t mid_pwr_irq_handler(int irq, void *dev_id) +{ + struct mid_pwr *pwr = dev_id; + u32 ics; + + ics = readl(pwr->regs + PM_ICS); + if (!(ics & PM_ICS_IP)) + return IRQ_NONE; + + writel(ics | PM_ICS_IP, pwr->regs + PM_ICS); + + dev_warn(pwr->dev, "Unexpected IRQ: %#x\n", PM_ICS_INT_STATUS(ics)); + return IRQ_HANDLED; +} + +struct mid_pwr_device_info { + int (*set_initial_state)(struct mid_pwr *pwr); +}; + +static int mid_pwr_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct mid_pwr_device_info *info = (void *)id->driver_data; + struct device *dev = &pdev->dev; + struct mid_pwr *pwr; + int ret; + + ret = pcim_enable_device(pdev); + if (ret < 0) { + dev_err(&pdev->dev, "error: could not enable device\n"); + return ret; + } + + ret = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev)); + if (ret) { + dev_err(&pdev->dev, "I/O memory remapping failed\n"); + return ret; + } + + pwr = devm_kzalloc(dev, sizeof(*pwr), GFP_KERNEL); + if (!pwr) + return -ENOMEM; + + pwr->dev = dev; + pwr->regs = pcim_iomap_table(pdev)[0]; + pwr->irq = pdev->irq; + + mutex_init(&pwr->lock); + + /* Disable interrupts */ + mid_pwr_interrupt_disable(pwr); + + if (info && info->set_initial_state) { + ret = info->set_initial_state(pwr); + if (ret) + dev_warn(dev, "Can't set initial state: %d\n", ret); + } + + ret = devm_request_irq(dev, pdev->irq, mid_pwr_irq_handler, + IRQF_NO_SUSPEND, pci_name(pdev), pwr); + if (ret) + return ret; + + pwr->available = true; + midpwr = pwr; + + pci_set_drvdata(pdev, pwr); + return 0; +} + +static int tng_set_initial_state(struct mid_pwr *pwr) +{ + unsigned int i, j; + int ret; + + /* + * Enable wake events. + * + * PWRMU supports up to 32 sources for wake up the system. Ungate them + * all here. + */ + mid_pwr_set_wake(pwr, 0, 0xffffffff); + mid_pwr_set_wake(pwr, 1, 0xffffffff); + + /* + * Power off South Complex devices. + * + * There is a map (see a note below) of 64 devices with 2 bits per each + * on 32-bit HW registers. The following calls set all devices to one + * known initial state, i.e. PCI_D3hot. This is done in conjunction + * with PMCSR setting in arch/x86/pci/intel_mid_pci.c. + * + * NOTE: The actual device mapping is provided by a platform at run + * time using vendor capability of PCI configuration space. + */ + mid_pwr_set_state(pwr, 0, 0xffffffff); + mid_pwr_set_state(pwr, 1, 0xffffffff); + mid_pwr_set_state(pwr, 2, 0xffffffff); + mid_pwr_set_state(pwr, 3, 0xffffffff); + + /* Send command to SCU */ + ret = mid_pwr_wait_for_cmd(pwr, CMD_SET_CFG); + if (ret) + return ret; + + for (i = 0; i < LSS_MAX_DEVS; i++) { + for (j = 0; j < LSS_MAX_SHARED_DEVS; j++) + pwr->lss[i][j].state = PCI_D3hot; + } + + return 0; +} + +static const struct mid_pwr_device_info tng_info = { + .set_initial_state = tng_set_initial_state, +}; + +static const struct pci_device_id mid_pwr_pci_ids[] = { + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_TANGIER), (kernel_ulong_t)&tng_info }, + {} +}; +MODULE_DEVICE_TABLE(pci, mid_pwr_pci_ids); + +static struct pci_driver mid_pwr_pci_driver = { + .name = "intel_mid_pwr", + .probe = mid_pwr_probe, + .id_table = mid_pwr_pci_ids, +}; + +builtin_pci_driver(mid_pwr_pci_driver); diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 1fa6925733d3..8db5079f09a7 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -51,6 +51,9 @@ obj-$(CONFIG_ACPI) += pci-acpi.o # SMBIOS provided firmware instance and labels obj-$(CONFIG_PCI_LABEL) += pci-label.o +# Intel MID platform PM support +obj-$(CONFIG_X86_INTEL_MID) += pci-mid.o + obj-$(CONFIG_PCI_SYSCALL) += syscall.o obj-$(CONFIG_PCI_STUB) += pci-stub.o diff --git a/drivers/pci/pci-mid.c b/drivers/pci/pci-mid.c new file mode 100644 index 000000000000..c878aa71173b --- /dev/null +++ b/drivers/pci/pci-mid.c @@ -0,0 +1,77 @@ +/* + * Intel MID platform PM support + * + * Copyright (C) 2016, Intel Corporation + * + * Author: Andy Shevchenko + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include +#include + +#include +#include +#include + +#include "pci.h" + +static bool mid_pci_power_manageable(struct pci_dev *dev) +{ + return true; +} + +static int mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state) +{ + return intel_mid_pci_set_power_state(pdev, state); +} + +static pci_power_t mid_pci_choose_state(struct pci_dev *pdev) +{ + return PCI_D3hot; +} + +static int mid_pci_sleep_wake(struct pci_dev *dev, bool enable) +{ + return 0; +} + +static int mid_pci_run_wake(struct pci_dev *dev, bool enable) +{ + return 0; +} + +static bool mid_pci_need_resume(struct pci_dev *dev) +{ + return false; +} + +static struct pci_platform_pm_ops mid_pci_platform_pm = { + .is_manageable = mid_pci_power_manageable, + .set_state = mid_pci_set_power_state, + .choose_state = mid_pci_choose_state, + .sleep_wake = mid_pci_sleep_wake, + .run_wake = mid_pci_run_wake, + .need_resume = mid_pci_need_resume, +}; + +#define ICPU(model) { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, } + +static const struct x86_cpu_id lpss_cpu_ids[] = { + ICPU(INTEL_FAM6_ATOM_MERRIFIELD1), + {} +}; + +static int __init mid_pci_init(void) +{ + const struct x86_cpu_id *id; + + id = x86_match_cpu(lpss_cpu_ids); + if (id) + pci_set_platform_pm(&mid_pci_platform_pm); + return 0; +} +arch_initcall(mid_pci_init); -- cgit v1.2.3 From 00688272157d83e48d1369d7d11c479571324e40 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 15 Jun 2016 12:48:53 +0300 Subject: x86/platform/intel-mid: Enable GPIO expanders on Edison Intel Edison board provides GPIO expanders connected to I2C bus. Add necessary file to get those enumerated. Signed-off-by: Andy Shevchenko Cc: Dan O'Donovan Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1465984133-41639-1-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/platform/intel-mid/device_libs/Makefile | 6 +- .../intel-mid/device_libs/platform_pcal9555a.c | 99 ++++++++++++++++++++++ 2 files changed, 103 insertions(+), 2 deletions(-) create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile index 91ec9f8704bf..abe8ba87c970 100644 --- a/arch/x86/platform/intel-mid/device_libs/Makefile +++ b/arch/x86/platform/intel-mid/device_libs/Makefile @@ -11,11 +11,13 @@ obj-$(subst m,y,$(CONFIG_INTEL_MFLD_THERMAL)) += platform_msic_thermal.o # I2C Devices obj-$(subst m,y,$(CONFIG_SENSORS_EMC1403)) += platform_emc1403.o obj-$(subst m,y,$(CONFIG_SENSORS_LIS3LV02D)) += platform_lis331.o -obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_max7315.o obj-$(subst m,y,$(CONFIG_INPUT_MPU3050)) += platform_mpu3050.o obj-$(subst m,y,$(CONFIG_INPUT_BMA150)) += platform_bma023.o -obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o obj-$(subst m,y,$(CONFIG_DRM_MEDFIELD)) += platform_tc35876x.o +# I2C GPIO Expanders +obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_max7315.o +obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_pcal9555a.o +obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o # MISC Devices obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o obj-$(subst m,y,$(CONFIG_INTEL_MID_WATCHDOG)) += platform_wdt.o diff --git a/arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c b/arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c new file mode 100644 index 000000000000..429a94192671 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c @@ -0,0 +1,99 @@ +/* + * PCAL9555a platform data initilization file + * + * Copyright (C) 2016, Intel Corporation + * + * Authors: Andy Shevchenko + * Dan O'Donovan + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include +#include +#include +#include +#include + +#include + +#define PCAL9555A_NUM 4 + +static struct pca953x_platform_data pcal9555a_pdata[PCAL9555A_NUM]; +static int nr; + +static void __init *pcal9555a_platform_data(void *info) +{ + struct i2c_board_info *i2c_info = info; + char *type = i2c_info->type; + struct pca953x_platform_data *pcal9555a; + char base_pin_name[SFI_NAME_LEN + 1]; + char intr_pin_name[SFI_NAME_LEN + 1]; + int gpio_base, intr; + + snprintf(base_pin_name, sizeof(base_pin_name), "%s_base", type); + snprintf(intr_pin_name, sizeof(intr_pin_name), "%s_int", type); + + gpio_base = get_gpio_by_name(base_pin_name); + intr = get_gpio_by_name(intr_pin_name); + + /* Check if the SFI record valid */ + if (gpio_base == -1) + return NULL; + + if (nr >= PCAL9555A_NUM) { + pr_err("%s: Too many instances, only %d supported\n", __func__, + PCAL9555A_NUM); + return NULL; + } + + pcal9555a = &pcal9555a_pdata[nr++]; + pcal9555a->gpio_base = gpio_base; + + if (intr >= 0) { + i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET; + pcal9555a->irq_base = gpio_base + INTEL_MID_IRQ_OFFSET; + } else { + i2c_info->irq = -1; + pcal9555a->irq_base = -1; + } + + strcpy(type, "pcal9555a"); + return pcal9555a; +} + +static const struct devs_id pcal9555a_1_dev_id __initconst = { + .name = "pcal9555a-1", + .type = SFI_DEV_TYPE_I2C, + .delay = 1, + .get_platform_data = &pcal9555a_platform_data, +}; + +static const struct devs_id pcal9555a_2_dev_id __initconst = { + .name = "pcal9555a-2", + .type = SFI_DEV_TYPE_I2C, + .delay = 1, + .get_platform_data = &pcal9555a_platform_data, +}; + +static const struct devs_id pcal9555a_3_dev_id __initconst = { + .name = "pcal9555a-3", + .type = SFI_DEV_TYPE_I2C, + .delay = 1, + .get_platform_data = &pcal9555a_platform_data, +}; + +static const struct devs_id pcal9555a_4_dev_id __initconst = { + .name = "pcal9555a-4", + .type = SFI_DEV_TYPE_I2C, + .delay = 1, + .get_platform_data = &pcal9555a_platform_data, +}; + +sfi_device(pcal9555a_1_dev_id); +sfi_device(pcal9555a_2_dev_id); +sfi_device(pcal9555a_3_dev_id); +sfi_device(pcal9555a_4_dev_id); -- cgit v1.2.3 From 0519e8b4cb2bda598f941088948129f9fe9e6acd Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 29 Jun 2016 22:01:34 +0300 Subject: x86/platform/intel-mid: Add pinctrl for Intel Merrifield Intel Merrifield uses a special address space reserved for Family-Level Interface Shim (FLIS) that allows consumers to mux and configure pins. Create a platform device for it. Signed-off-by: Andy Shevchenko Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1467226894-107109-1-git-send-email-andriy.shevchenko@linux.intel.com [ Fixed typo. ] Signed-off-by: Ingo Molnar --- arch/x86/platform/intel-mid/device_libs/Makefile | 2 + .../intel-mid/device_libs/platform_mrfld_pinctrl.c | 43 ++++++++++++++++++++++ 2 files changed, 45 insertions(+) create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile index abe8ba87c970..79e97ed5be5b 100644 --- a/arch/x86/platform/intel-mid/device_libs/Makefile +++ b/arch/x86/platform/intel-mid/device_libs/Makefile @@ -1,3 +1,5 @@ +# Family-Level Interface Shim (FLIS) +obj-$(subst m,y,$(CONFIG_PINCTRL_MERRIFIELD)) += platform_mrfld_pinctrl.o # IPC Devices obj-y += platform_ipc.o obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic.o diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c new file mode 100644 index 000000000000..4de8a664e6a1 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c @@ -0,0 +1,43 @@ +/* + * Intel Merrifield FLIS platform device initialization file + * + * Copyright (C) 2016, Intel Corporation + * + * Author: Andy Shevchenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include +#include +#include + +#include + +#define FLIS_BASE_ADDR 0xff0c0000 +#define FLIS_LENGTH 0x8000 + +static struct resource mrfld_pinctrl_mmio_resource = { + .start = FLIS_BASE_ADDR, + .end = FLIS_BASE_ADDR + FLIS_LENGTH - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mrfld_pinctrl_device = { + .name = "pinctrl-merrifield", + .id = PLATFORM_DEVID_NONE, + .resource = &mrfld_pinctrl_mmio_resource, + .num_resources = 1, +}; + +static int __init mrfld_pinctrl_init(void) +{ + if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER) + return platform_device_register(&mrfld_pinctrl_device); + + return -ENODEV; +} +arch_initcall(mrfld_pinctrl_init); -- cgit v1.2.3 From e99a0745bdf8a5f7e3126a686846af4aeb852cc9 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 5 Jul 2016 23:09:07 +0300 Subject: x86/pci, x86/platform/intel_mid_pci: Remove duplicate power off code Intel MID platforms (Moorestown, Medfield, Clovertrail, Merrifield) are sharing the code in the intel_mid_pci.c module. There is no need to power off specific Moorestown devices after the following commit: 5823d0893ec2 ("x86/platform/intel-mid: Add Power Management Unit driver") ... because the condition in mrfld_power_off_dev() is true for any platform from the above list. Remove duplicate power off certain devices on Intel Moorestown and rename the affected functions to show that they are applied to any of Intel MID platforms. Signed-off-by: Andy Shevchenko Cc: Bjorn Helgaas Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1467749348-100518-1-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/pci/intel_mid_pci.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c index a9710433be4d..5413d6a9817c 100644 --- a/arch/x86/pci/intel_mid_pci.c +++ b/arch/x86/pci/intel_mid_pci.c @@ -316,7 +316,7 @@ static void pci_d3delay_fixup(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup); -static void mid_power_off_dev(struct pci_dev *dev) +static void mid_power_off_one_device(struct pci_dev *dev) { u16 pmcsr; @@ -330,12 +330,7 @@ static void mid_power_off_dev(struct pci_dev *dev) pci_set_power_state(dev, PCI_D3hot); } -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0801, mid_power_off_dev); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0809, mid_power_off_dev); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x080C, mid_power_off_dev); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0815, mid_power_off_dev); - -static void mrfld_power_off_dev(struct pci_dev *dev) +static void mid_power_off_devices(struct pci_dev *dev) { int id; @@ -350,10 +345,10 @@ static void mrfld_power_off_dev(struct pci_dev *dev) * This sets only PMCSR bits. The actual power off will happen in * arch/x86/platform/intel-mid/pwr.c. */ - mid_power_off_dev(dev); + mid_power_off_one_device(dev); } -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, mrfld_power_off_dev); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, mid_power_off_devices); /* * Langwell devices reside at fixed offsets, don't try to move them. -- cgit v1.2.3 From ca22312dc840065206285626829ceed8bb4df88c Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 5 Jul 2016 23:09:08 +0300 Subject: x86/platform/intel-mid: Extend PWRMU to support Penwell Intel Penwell is one of the first SoCs in Intel MID series. It has slightly older version of PWRMU IP, though it is compatible with one found on Intel Tangier. Since we are not using (yet) any advanced stuff in the driver we may safely re-use what it's done for Intel Tangier for now. Extend PWRMU driver to support Intel Penwell by adding PCI ID and re-using existing ->set_initial_state() function. Signed-off-by: Andy Shevchenko Cc: Bjorn Helgaas Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1467749348-100518-2-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/platform/intel-mid/pwr.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/x86/platform/intel-mid/pwr.c b/arch/x86/platform/intel-mid/pwr.c index 59faf05d23f5..5bc90dd102d4 100644 --- a/arch/x86/platform/intel-mid/pwr.c +++ b/arch/x86/platform/intel-mid/pwr.c @@ -75,6 +75,7 @@ #define LSS_PWS_BITS 2 /* power state width */ /* Supported device IDs */ +#define PCI_DEVICE_ID_PENWELL 0x0828 #define PCI_DEVICE_ID_TANGIER 0x11a1 struct mid_pwr_dev { @@ -354,7 +355,7 @@ static int mid_pwr_probe(struct pci_dev *pdev, const struct pci_device_id *id) return 0; } -static int tng_set_initial_state(struct mid_pwr *pwr) +static int mid_set_initial_state(struct mid_pwr *pwr) { unsigned int i, j; int ret; @@ -397,12 +398,13 @@ static int tng_set_initial_state(struct mid_pwr *pwr) return 0; } -static const struct mid_pwr_device_info tng_info = { - .set_initial_state = tng_set_initial_state, +static const struct mid_pwr_device_info mid_info = { + .set_initial_state = mid_set_initial_state, }; static const struct pci_device_id mid_pwr_pci_ids[] = { - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_TANGIER), (kernel_ulong_t)&tng_info }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PENWELL), (kernel_ulong_t)&mid_info }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_TANGIER), (kernel_ulong_t)&mid_info }, {} }; MODULE_DEVICE_TABLE(pci, mid_pwr_pci_ids); -- cgit v1.2.3 From e81e11bc71573709352a5275e175a4b2ee1325e5 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 5 Jul 2016 03:14:50 +0300 Subject: x86/platform/intel-mid: Enable spidev on Intel Edison boards Intel Edison board provides one of the SPI bus for user's connected devices. Append platform data to get spidev enumerated over it. Signed-off-by: Andy Shevchenko Cc: Dan O'Donovan Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1467677690-90007-1-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/platform/intel-mid/device_libs/Makefile | 2 + .../intel-mid/device_libs/platform_spidev.c | 50 ++++++++++++++++++++++ 2 files changed, 52 insertions(+) create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_spidev.c diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile index 79e97ed5be5b..fc135bf70511 100644 --- a/arch/x86/platform/intel-mid/device_libs/Makefile +++ b/arch/x86/platform/intel-mid/device_libs/Makefile @@ -10,6 +10,8 @@ obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic_battery.o obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_msic_power_btn.o obj-$(subst m,y,$(CONFIG_GPIO_INTEL_PMIC)) += platform_pmic_gpio.o obj-$(subst m,y,$(CONFIG_INTEL_MFLD_THERMAL)) += platform_msic_thermal.o +# SPI Devices +obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) += platform_spidev.o # I2C Devices obj-$(subst m,y,$(CONFIG_SENSORS_EMC1403)) += platform_emc1403.o obj-$(subst m,y,$(CONFIG_SENSORS_LIS3LV02D)) += platform_lis331.o diff --git a/arch/x86/platform/intel-mid/device_libs/platform_spidev.c b/arch/x86/platform/intel-mid/device_libs/platform_spidev.c new file mode 100644 index 000000000000..30c601b399ee --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_spidev.c @@ -0,0 +1,50 @@ +/* + * spidev platform data initilization file + * + * (C) Copyright 2014, 2016 Intel Corporation + * Authors: Andy Shevchenko + * Dan O'Donovan + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include +#include +#include +#include + +#include + +#define MRFLD_SPI_DEFAULT_DMA_BURST 8 +#define MRFLD_SPI_DEFAULT_TIMEOUT 500 + +/* GPIO pin for spidev chipselect */ +#define MRFLD_SPIDEV_GPIO_CS 111 + +static struct pxa2xx_spi_chip spidev_spi_chip = { + .dma_burst_size = MRFLD_SPI_DEFAULT_DMA_BURST, + .timeout = MRFLD_SPI_DEFAULT_TIMEOUT, + .gpio_cs = MRFLD_SPIDEV_GPIO_CS, +}; + +static void __init *spidev_platform_data(void *info) +{ + struct spi_board_info *spi_info = info; + + spi_info->mode = SPI_MODE_0; + spi_info->controller_data = &spidev_spi_chip; + + return NULL; +} + +static const struct devs_id spidev_dev_id __initconst = { + .name = "spidev", + .type = SFI_DEV_TYPE_SPI, + .delay = 0, + .get_platform_data = &spidev_platform_data, +}; + +sfi_device(spidev_dev_id); -- cgit v1.2.3 From 62d855d3e725f4e4b0d2786f7cad3f0660a03a59 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Sat, 18 Jun 2016 18:51:34 +0300 Subject: x86/platform/intel-mid: Rename mrfl.c to mrfld.c Use mrfld as an abbreviation of Merrifield to be consistent with the rest of the code. In the future we are going to add more files here prefixed with 'mrfld'. Signed-off-by: Andy Shevchenko Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1466265094-146113-1-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/platform/intel-mid/Makefile | 2 +- arch/x86/platform/intel-mid/mrfl.c | 100 ----------------------------------- arch/x86/platform/intel-mid/mrfld.c | 100 +++++++++++++++++++++++++++++++++++ 3 files changed, 101 insertions(+), 101 deletions(-) delete mode 100644 arch/x86/platform/intel-mid/mrfl.c create mode 100644 arch/x86/platform/intel-mid/mrfld.c diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile index aebb5b9ea80a..fa021dfab088 100644 --- a/arch/x86/platform/intel-mid/Makefile +++ b/arch/x86/platform/intel-mid/Makefile @@ -1,4 +1,4 @@ -obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o mfld.o mrfl.o pwr.o +obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o mfld.o mrfld.o pwr.o # SFI specific code ifdef CONFIG_X86_INTEL_MID diff --git a/arch/x86/platform/intel-mid/mrfl.c b/arch/x86/platform/intel-mid/mrfl.c deleted file mode 100644 index bd1adc621781..000000000000 --- a/arch/x86/platform/intel-mid/mrfl.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * mrfl.c: Intel Merrifield platform specific setup code - * - * (C) Copyright 2013 Intel Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 - * of the License. - */ - -#include - -#include -#include - -#include "intel_mid_weak_decls.h" - -static unsigned long __init tangier_calibrate_tsc(void) -{ - unsigned long fast_calibrate; - u32 lo, hi, ratio, fsb, bus_freq; - - /* *********************** */ - /* Compute TSC:Ratio * FSB */ - /* *********************** */ - - /* Compute Ratio */ - rdmsr(MSR_PLATFORM_INFO, lo, hi); - pr_debug("IA32 PLATFORM_INFO is 0x%x : %x\n", hi, lo); - - ratio = (lo >> 8) & 0xFF; - pr_debug("ratio is %d\n", ratio); - if (!ratio) { - pr_err("Read a zero ratio, force tsc ratio to 4 ...\n"); - ratio = 4; - } - - /* Compute FSB */ - rdmsr(MSR_FSB_FREQ, lo, hi); - pr_debug("Actual FSB frequency detected by SOC 0x%x : %x\n", - hi, lo); - - bus_freq = lo & 0x7; - pr_debug("bus_freq = 0x%x\n", bus_freq); - - if (bus_freq == 0) - fsb = FSB_FREQ_100SKU; - else if (bus_freq == 1) - fsb = FSB_FREQ_100SKU; - else if (bus_freq == 2) - fsb = FSB_FREQ_133SKU; - else if (bus_freq == 3) - fsb = FSB_FREQ_167SKU; - else if (bus_freq == 4) - fsb = FSB_FREQ_83SKU; - else if (bus_freq == 5) - fsb = FSB_FREQ_400SKU; - else if (bus_freq == 6) - fsb = FSB_FREQ_267SKU; - else if (bus_freq == 7) - fsb = FSB_FREQ_333SKU; - else { - BUG(); - pr_err("Invalid bus_freq! Setting to minimal value!\n"); - fsb = FSB_FREQ_100SKU; - } - - /* TSC = FSB Freq * Resolved HFM Ratio */ - fast_calibrate = ratio * fsb; - pr_debug("calculate tangier tsc %lu KHz\n", fast_calibrate); - - /* ************************************ */ - /* Calculate Local APIC Timer Frequency */ - /* ************************************ */ - lapic_timer_frequency = (fsb * 1000) / HZ; - - pr_debug("Setting lapic_timer_frequency = %d\n", - lapic_timer_frequency); - - /* mark tsc clocksource as reliable */ - set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE); - - return fast_calibrate; -} - -static void __init tangier_arch_setup(void) -{ - x86_platform.calibrate_tsc = tangier_calibrate_tsc; -} - -/* tangier arch ops */ -static struct intel_mid_ops tangier_ops = { - .arch_setup = tangier_arch_setup, -}; - -void *get_tangier_ops(void) -{ - return &tangier_ops; -} diff --git a/arch/x86/platform/intel-mid/mrfld.c b/arch/x86/platform/intel-mid/mrfld.c new file mode 100644 index 000000000000..59253db41bbc --- /dev/null +++ b/arch/x86/platform/intel-mid/mrfld.c @@ -0,0 +1,100 @@ +/* + * Intel Merrifield platform specific setup code + * + * (C) Copyright 2013 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include + +#include +#include + +#include "intel_mid_weak_decls.h" + +static unsigned long __init tangier_calibrate_tsc(void) +{ + unsigned long fast_calibrate; + u32 lo, hi, ratio, fsb, bus_freq; + + /* *********************** */ + /* Compute TSC:Ratio * FSB */ + /* *********************** */ + + /* Compute Ratio */ + rdmsr(MSR_PLATFORM_INFO, lo, hi); + pr_debug("IA32 PLATFORM_INFO is 0x%x : %x\n", hi, lo); + + ratio = (lo >> 8) & 0xFF; + pr_debug("ratio is %d\n", ratio); + if (!ratio) { + pr_err("Read a zero ratio, force tsc ratio to 4 ...\n"); + ratio = 4; + } + + /* Compute FSB */ + rdmsr(MSR_FSB_FREQ, lo, hi); + pr_debug("Actual FSB frequency detected by SOC 0x%x : %x\n", + hi, lo); + + bus_freq = lo & 0x7; + pr_debug("bus_freq = 0x%x\n", bus_freq); + + if (bus_freq == 0) + fsb = FSB_FREQ_100SKU; + else if (bus_freq == 1) + fsb = FSB_FREQ_100SKU; + else if (bus_freq == 2) + fsb = FSB_FREQ_133SKU; + else if (bus_freq == 3) + fsb = FSB_FREQ_167SKU; + else if (bus_freq == 4) + fsb = FSB_FREQ_83SKU; + else if (bus_freq == 5) + fsb = FSB_FREQ_400SKU; + else if (bus_freq == 6) + fsb = FSB_FREQ_267SKU; + else if (bus_freq == 7) + fsb = FSB_FREQ_333SKU; + else { + BUG(); + pr_err("Invalid bus_freq! Setting to minimal value!\n"); + fsb = FSB_FREQ_100SKU; + } + + /* TSC = FSB Freq * Resolved HFM Ratio */ + fast_calibrate = ratio * fsb; + pr_debug("calculate tangier tsc %lu KHz\n", fast_calibrate); + + /* ************************************ */ + /* Calculate Local APIC Timer Frequency */ + /* ************************************ */ + lapic_timer_frequency = (fsb * 1000) / HZ; + + pr_debug("Setting lapic_timer_frequency = %d\n", + lapic_timer_frequency); + + /* mark tsc clocksource as reliable */ + set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE); + + return fast_calibrate; +} + +static void __init tangier_arch_setup(void) +{ + x86_platform.calibrate_tsc = tangier_calibrate_tsc; +} + +/* tangier arch ops */ +static struct intel_mid_ops tangier_ops = { + .arch_setup = tangier_arch_setup, +}; + +void *get_tangier_ops(void) +{ + return &tangier_ops; +} -- cgit v1.2.3 From a11836fa5a67ba56d8338138e37b42384af73e5e Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Sat, 9 Jul 2016 16:45:29 +0300 Subject: x86/platform/intel-mid: Mark regulators explicitly defined Intel MID platforms are using explicitly defined regulators. Let the regulator core know that we do not have any additional regulators left. This lets it substitute unprovided regulators with dummy ones. Without this change when CONFIG_REGULATOR=y the USB driver fails on getting "vbus" regulator and SDHCI can't get "vmmc" and "vqmmc" regulators either. Signed-off-by: Andy Shevchenko Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1468071929-77383-1-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/platform/intel-mid/intel-mid.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c index 90bb997ed0a2..abbf49c6e9d3 100644 --- a/arch/x86/platform/intel-mid/intel-mid.c +++ b/arch/x86/platform/intel-mid/intel-mid.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -144,6 +145,15 @@ static void intel_mid_arch_setup(void) out: if (intel_mid_ops->arch_setup) intel_mid_ops->arch_setup(); + + /* + * Intel MID platforms are using explicitly defined regulators. + * + * Let the regulator core know that we do not have any additional + * regulators left. This lets it substitute unprovided regulators with + * dummy ones: + */ + regulator_has_full_constraints(); } /* MID systems don't have i8042 controller */ -- cgit v1.2.3 From 06a3fcc44d98d6b05afeeae2fbb32938dc3233c7 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 15 Jun 2016 15:04:20 +0300 Subject: x86/platform/intel-mid: Make vertical indentation consistent The vertical indentation is kinda chaotic in intel-mid.h. Let's be consistent with it. Suggested-by: Ingo Molnar Signed-off-by: Andy Shevchenko Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1465992260-29897-1-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/intel-mid.h | 65 +++++++++++++++++++++------------------- 1 file changed, 34 insertions(+), 31 deletions(-) diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h index 38498a4fb44f..59013a2ac713 100644 --- a/arch/x86/include/asm/intel-mid.h +++ b/arch/x86/include/asm/intel-mid.h @@ -42,11 +42,11 @@ struct devs_id { void *(*get_platform_data)(void *info); /* Custom handler for devices */ void (*device_handler)(struct sfi_device_table_entry *pentry, - struct devs_id *dev); + struct devs_id *dev); }; -#define sfi_device(i) \ - static const struct devs_id *const __intel_mid_sfi_##i##_dev __used \ +#define sfi_device(i) \ + static const struct devs_id *const __intel_mid_sfi_##i##_dev __used \ __attribute__((__section__(".x86_intel_mid_dev.init"))) = &i /* @@ -68,7 +68,7 @@ extern enum intel_mid_cpu_type __intel_mid_cpu_chip; /** * struct intel_mid_ops - Interface between intel-mid & sub archs * @arch_setup: arch_setup function to re-initialize platform - * structures (x86_init, x86_platform_init) + * structures (x86_init, x86_platform_init) * * This structure can be extended if any new interface is required * between intel-mid & its sub arch files. @@ -78,20 +78,20 @@ struct intel_mid_ops { }; /* Helper API's for INTEL_MID_OPS_INIT */ -#define DECLARE_INTEL_MID_OPS_INIT(cpuname, cpuid) \ - [cpuid] = get_##cpuname##_ops +#define DECLARE_INTEL_MID_OPS_INIT(cpuname, cpuid) \ + [cpuid] = get_##cpuname##_ops /* Maximum number of CPU ops */ -#define MAX_CPU_OPS(a) (sizeof(a)/sizeof(void *)) +#define MAX_CPU_OPS(a) (sizeof(a)/sizeof(void *)) /* * For every new cpu addition, a weak get__ops() function needs be * declared in arch/x86/platform/intel_mid/intel_mid_weak_decls.h. */ -#define INTEL_MID_OPS_INIT {\ - DECLARE_INTEL_MID_OPS_INIT(penwell, INTEL_MID_CPU_CHIP_PENWELL), \ - DECLARE_INTEL_MID_OPS_INIT(cloverview, INTEL_MID_CPU_CHIP_CLOVERVIEW), \ - DECLARE_INTEL_MID_OPS_INIT(tangier, INTEL_MID_CPU_CHIP_TANGIER) \ +#define INTEL_MID_OPS_INIT { \ + DECLARE_INTEL_MID_OPS_INIT(penwell, INTEL_MID_CPU_CHIP_PENWELL), \ + DECLARE_INTEL_MID_OPS_INIT(cloverview, INTEL_MID_CPU_CHIP_CLOVERVIEW), \ + DECLARE_INTEL_MID_OPS_INIT(tangier, INTEL_MID_CPU_CHIP_TANGIER) \ }; #ifdef CONFIG_X86_INTEL_MID @@ -108,8 +108,8 @@ static inline bool intel_mid_has_msic(void) #else /* !CONFIG_X86_INTEL_MID */ -#define intel_mid_identify_cpu() (0) -#define intel_mid_has_msic() (0) +#define intel_mid_identify_cpu() 0 +#define intel_mid_has_msic() 0 #endif /* !CONFIG_X86_INTEL_MID */ @@ -125,35 +125,38 @@ extern enum intel_mid_timer_options intel_mid_timer_options; * Penwell uses spread spectrum clock, so the freq number is not exactly * the same as reported by MSR based on SDM. */ -#define FSB_FREQ_83SKU 83200 -#define FSB_FREQ_100SKU 99840 -#define FSB_FREQ_133SKU 133000 +#define FSB_FREQ_83SKU 83200 +#define FSB_FREQ_100SKU 99840 +#define FSB_FREQ_133SKU 133000 -#define FSB_FREQ_167SKU 167000 -#define FSB_FREQ_200SKU 200000 -#define FSB_FREQ_267SKU 267000 -#define FSB_FREQ_333SKU 333000 -#define FSB_FREQ_400SKU 400000 +#define FSB_FREQ_167SKU 167000 +#define FSB_FREQ_200SKU 200000 +#define FSB_FREQ_267SKU 267000 +#define FSB_FREQ_333SKU 333000 +#define FSB_FREQ_400SKU 400000 /* Bus Select SoC Fuse value */ -#define BSEL_SOC_FUSE_MASK 0x7 -#define BSEL_SOC_FUSE_001 0x1 /* FSB 133MHz */ -#define BSEL_SOC_FUSE_101 0x5 /* FSB 100MHz */ -#define BSEL_SOC_FUSE_111 0x7 /* FSB 83MHz */ +#define BSEL_SOC_FUSE_MASK 0x7 +/* FSB 133MHz */ +#define BSEL_SOC_FUSE_001 0x1 +/* FSB 100MHz */ +#define BSEL_SOC_FUSE_101 0x5 +/* FSB 83MHz */ +#define BSEL_SOC_FUSE_111 0x7 -#define SFI_MTMR_MAX_NUM 8 -#define SFI_MRTC_MAX 8 +#define SFI_MTMR_MAX_NUM 8 +#define SFI_MRTC_MAX 8 extern void intel_scu_devices_create(void); extern void intel_scu_devices_destroy(void); /* VRTC timer */ -#define MRST_VRTC_MAP_SZ (1024) -/*#define MRST_VRTC_PGOFFSET (0xc00) */ +#define MRST_VRTC_MAP_SZ 1024 +/* #define MRST_VRTC_PGOFFSET 0xc00 */ extern void intel_mid_rtc_init(void); -/* the offset for the mapping of global gpio pin to irq */ -#define INTEL_MID_IRQ_OFFSET 0x100 +/* The offset for the mapping of global gpio pin to irq */ +#define INTEL_MID_IRQ_OFFSET 0x100 #endif /* _ASM_X86_INTEL_MID_H */ -- cgit v1.2.3 From 707a605b5a1732e548f4ff51ccf0199a14d95f0f Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 12 Jul 2016 14:04:22 +0300 Subject: x86/pci: Use MRFLD abbreviation for Merrifield Everywhere in the kernel the MRFLD is used as abbreviation of Intel Merrifield. Do the same in intel_mid_pci.c module. Signed-off-by: Andy Shevchenko Cc: Bjorn Helgaas Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1468321462-136016-1-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/pci/intel_mid_pci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c index 5413d6a9817c..5a18aedcb341 100644 --- a/arch/x86/pci/intel_mid_pci.c +++ b/arch/x86/pci/intel_mid_pci.c @@ -36,8 +36,8 @@ #define PCIE_CAP_OFFSET 0x100 /* Quirks for the listed devices */ -#define PCI_DEVICE_ID_INTEL_MRFL_MMC 0x1190 -#define PCI_DEVICE_ID_INTEL_MRFL_HSU 0x1191 +#define PCI_DEVICE_ID_INTEL_MRFLD_MMC 0x1190 +#define PCI_DEVICE_ID_INTEL_MRFLD_HSU 0x1191 /* Fixed BAR fields */ #define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00 /* Fixed BAR (TBD) */ @@ -229,7 +229,7 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev) * Skip HS UART common registers device since it has * IRQ0 assigned and not used by the kernel. */ - if (dev->device == PCI_DEVICE_ID_INTEL_MRFL_HSU) + if (dev->device == PCI_DEVICE_ID_INTEL_MRFLD_HSU) return -EBUSY; /* * TNG has IRQ0 assigned to eMMC controller. But there @@ -238,7 +238,7 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev) * eMMC gets it. The rest of devices still could be * enabled without interrupt line being allocated. */ - if (dev->device != PCI_DEVICE_ID_INTEL_MRFL_MMC) + if (dev->device != PCI_DEVICE_ID_INTEL_MRFLD_MMC) return 0; } break; -- cgit v1.2.3 From 05f310e26fe9d97fec0ce1752edc16bf1ea55a2d Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 12 Jul 2016 14:16:32 +0300 Subject: x86/sfi: Enable enumeration of SD devices SFI specification v0.8.2 defines type of devices which are connected to SD bus. In particularly WiFi dongle is a such. Add a callback to enumerate the devices connected to SD bus. Signed-off-by: Andy Shevchenko Cc: Bjorn Helgaas Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1468322192-62080-1-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/intel-mid.h | 15 +++++++++++++++ arch/x86/platform/intel-mid/sfi.c | 29 +++++++++++++++++++++++++++++ include/linux/sfi.h | 1 + 3 files changed, 45 insertions(+) diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h index 59013a2ac713..9d6b097aa73d 100644 --- a/arch/x86/include/asm/intel-mid.h +++ b/arch/x86/include/asm/intel-mid.h @@ -49,6 +49,21 @@ struct devs_id { static const struct devs_id *const __intel_mid_sfi_##i##_dev __used \ __attribute__((__section__(".x86_intel_mid_dev.init"))) = &i +/** +* struct mid_sd_board_info - template for SD device creation +* @name: identifies the driver +* @bus_num: board-specific identifier for a given SD controller +* @max_clk: the maximum frequency device supports +* @platform_data: the particular data stored there is driver-specific +*/ +struct mid_sd_board_info { + char name[SFI_NAME_LEN]; + int bus_num; + unsigned short addr; + u32 max_clk; + void *platform_data; +}; + /* * Medfield is the follow-up of Moorestown, it combines two chip solution into * one. Other than that it also added always-on and constant tsc and lapic diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c index 5ee360a951ce..1555672d436f 100644 --- a/arch/x86/platform/intel-mid/sfi.c +++ b/arch/x86/platform/intel-mid/sfi.c @@ -407,6 +407,32 @@ static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry, i2c_register_board_info(pentry->host_num, &i2c_info, 1); } +static void __init sfi_handle_sd_dev(struct sfi_device_table_entry *pentry, + struct devs_id *dev) +{ + struct mid_sd_board_info sd_info; + void *pdata; + + memset(&sd_info, 0, sizeof(sd_info)); + strncpy(sd_info.name, pentry->name, SFI_NAME_LEN); + sd_info.bus_num = pentry->host_num; + sd_info.max_clk = pentry->max_freq; + sd_info.addr = pentry->addr; + pr_debug("SD bus = %d, name = %16.16s, max_clk = %d, addr = 0x%x\n", + sd_info.bus_num, + sd_info.name, + sd_info.max_clk, + sd_info.addr); + pdata = intel_mid_sfi_get_pdata(dev, &sd_info); + if (IS_ERR(pdata)) + return; + + /* Nothing we can do with this for now */ + sd_info.platform_data = pdata; + + pr_debug("Successfully registered %16.16s", sd_info.name); +} + extern struct devs_id *const __x86_intel_mid_dev_start[], *const __x86_intel_mid_dev_end[]; @@ -490,6 +516,9 @@ static int __init sfi_parse_devs(struct sfi_table_header *table) case SFI_DEV_TYPE_I2C: sfi_handle_i2c_dev(pentry, dev); break; + case SFI_DEV_TYPE_SD: + sfi_handle_sd_dev(pentry, dev); + break; case SFI_DEV_TYPE_UART: case SFI_DEV_TYPE_HSI: default: diff --git a/include/linux/sfi.h b/include/linux/sfi.h index d9b436f09925..e0e1597ef9e6 100644 --- a/include/linux/sfi.h +++ b/include/linux/sfi.h @@ -156,6 +156,7 @@ struct sfi_device_table_entry { #define SFI_DEV_TYPE_UART 2 #define SFI_DEV_TYPE_HSI 3 #define SFI_DEV_TYPE_IPC 4 +#define SFI_DEV_TYPE_SD 5 u8 host_num; /* attached to host 0, 1...*/ u16 addr; -- cgit v1.2.3