From e5cd7ff7058dc6f2133455636809a09b691ee419 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 22 Nov 2016 15:06:04 +0100 Subject: ARM: gr8: Rename the DTSI and relevant DTS Reviews have found that sun5i was a better prefix after all for the GR8. Rename the relevant device trees before it's too late. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 2 +- arch/arm/boot/dts/ntc-gr8-evb.dts | 342 ----------- arch/arm/boot/dts/ntc-gr8.dtsi | 1087 ----------------------------------- arch/arm/boot/dts/sun5i-gr8-evb.dts | 342 +++++++++++ arch/arm/boot/dts/sun5i-gr8.dtsi | 1087 +++++++++++++++++++++++++++++++++++ 5 files changed, 1430 insertions(+), 1430 deletions(-) delete mode 100644 arch/arm/boot/dts/ntc-gr8-evb.dts delete mode 100644 arch/arm/boot/dts/ntc-gr8.dtsi create mode 100644 arch/arm/boot/dts/sun5i-gr8-evb.dts create mode 100644 arch/arm/boot/dts/sun5i-gr8.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index befcd2619902..c558ba75cbcc 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -745,7 +745,6 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-pcduino2.dtb \ sun4i-a10-pov-protab2-ips9.dtb dtb-$(CONFIG_MACH_SUN5I) += \ - ntc-gr8-evb.dtb \ sun5i-a10s-auxtek-t003.dtb \ sun5i-a10s-auxtek-t004.dtb \ sun5i-a10s-mk802.dtb \ @@ -761,6 +760,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a13-olinuxino-micro.dtb \ sun5i-a13-q8-tablet.dtb \ sun5i-a13-utoo-p66.dtb \ + sun5i-gr8-evb.dtb \ sun5i-r8-chip.dtb dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-app4-evb1.dtb \ diff --git a/arch/arm/boot/dts/ntc-gr8-evb.dts b/arch/arm/boot/dts/ntc-gr8-evb.dts deleted file mode 100644 index 4b622f3b5220..000000000000 --- a/arch/arm/boot/dts/ntc-gr8-evb.dts +++ /dev/null @@ -1,342 +0,0 @@ -/* - * Copyright 2016 Free Electrons - * Copyright 2016 NextThing Co - * - * Mylène Josserand - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "ntc-gr8.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include -#include -#include - -/ { - model = "NextThing GR8-EVB"; - compatible = "nextthing,gr8-evb", "nextthing,gr8"; - - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - serial0 = &uart1; - serial1 = &uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 10000 0>; - enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; - - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - }; -}; - -&be0 { - status = "okay"; -}; - -&codec { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - - /* - * The interrupt is routed through the "External Fast - * Interrupt Request" pin (ball G13 of the module) - * directly to the main interrupt controller, without - * any other controller interfering. - */ - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - - wm8978: codec@1a { - #sound-dai-cells = <0>; - compatible = "wlf,wm8978"; - reg = <0x1a>; - }; - - pcf8563: rtc@51 { - compatible = "phg,pcf8563"; - reg = <0x51>; - }; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; -}; - -&i2s0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>; - status = "okay"; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; - status = "okay"; -}; - -&lradc { - vref-supply = <®_ldo2>; - status = "okay"; - - button@190 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <190000>; - }; - - button@390 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <390000>; - }; - - button@600 { - label = "Menu"; - linux,code = ; - channel = <0>; - voltage = <600000>; - }; - - button@800 { - label = "Search"; - linux,code = ; - channel = <0>; - voltage = <800000>; - }; - - button@980 { - label = "Home"; - linux,code = ; - channel = <0>; - voltage = <980000>; - }; - - button@1180 { - label = "Esc"; - linux,code = ; - channel = <0>; - voltage = <1180000>; - }; - - button@1400 { - label = "Enter"; - linux,code = ; - channel = <0>; - voltage = <1400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gr8_evb>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; -}; - -&nfc { - pinctrl-names = "default"; - pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; - - /* MLC Support sucks for now */ - status = "disabled"; -}; - -&ohci0 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - mmc0_cd_pin_gr8_evb: mmc0-cd-pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb0_id_pin_gr8_evb: usb0-id-pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb0_vbus_det_pin_gr8_evb: usb0-vbus-det-pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb1_vbus_pin_gr8_evb: usb1-vbus-pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; - status = "okay"; -}; - -®_dcdc2 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; - regulator-always-on; -}; - -®_dcdc3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1300000>; - regulator-name = "vdd-sys"; - regulator-always-on; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "avcc"; - regulator-always-on; -}; - -®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_gr8_evb>; - gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&rtp { - allwinner,ts-attached; -}; - -&spdif { - pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; - status = "okay"; -}; - -&tve0 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>; - status = "okay"; -}; - -&usb_otg { - /* - * The GR8-EVB has a somewhat interesting design. There's a - * pin supposed to control VBUS, an ID pin, a VBUS detect pin, - * so everything should work just fine. - * - * Except that the pin supposed to control VBUS is not - * connected to any controllable output, neither to the SoC - * through a GPIO or to the PMIC, and it is pulled down, - * meaning that we will never be able to enable VBUS on this - * board. - */ - dr_mode = "otg"; - status = "okay"; -}; - -&usb_power_supply { - status = "okay"; -}; - -&usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_pin_gr8_evb>, <&usb0_vbus_det_pin_gr8_evb>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - usb0_vbus_power-supply = <&usb_power_supply>; - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/ntc-gr8.dtsi b/arch/arm/boot/dts/ntc-gr8.dtsi deleted file mode 100644 index ca54e03ef366..000000000000 --- a/arch/arm/boot/dts/ntc-gr8.dtsi +++ /dev/null @@ -1,1087 +0,0 @@ -/* - * Copyright 2016 Mylène Josserand - * - * Mylène Josserand - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include -#include -#include - -/ { - interrupt-parent = <&intc>; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a8"; - reg = <0x0>; - clocks = <&cpu>; - }; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - osc24M: clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc3M: osc3M-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "osc3M"; - }; - - osc32k: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll2: clk@01c20008 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-pll2-clk"; - reg = <0x01c20008 0x8>; - clocks = <&osc24M>; - clock-output-names = "pll2-1x", "pll2-2x", - "pll2-4x", "pll2-8x"; - }; - - pll3: clk@01c20010 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20010 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll3"; - }; - - pll3x2: pll3x2-clk { - compatible = "allwinner,sun4i-a10-pll3-2x-clk"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll3>; - clock-output-names = "pll3-2x"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - pll7: clk@01c20030 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20030 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll7"; - }; - - pll7x2: pll7x2-clk { - compatible = "allwinner,sun4i-a10-pll3-2x-clk"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll7>; - clock-output-names = "pll7-2x"; - }; - - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>, <&cpu>, <&pll6 1>; - clock-output-names = "ahb"; - /* - * Use PLL6 as parent, instead of CPU/AXI - * which has rate changes due to cpufreq - */ - assigned-clocks = <&ahb>; - assigned-clock-parents = <&pll6 1>; - }; - - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; - }; - - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; - }; - - axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&axi>; - clock-indices = <0>; - clock-output-names = "axi_dram"; - }; - - ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-ahb-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb>; - clock-indices = <0>, <1>, - <2>, <5>, <6>, - <7>, <8>, <9>, - <10>, <13>, - <14>, <17>, <20>, - <21>, <22>, - <28>, <32>, <34>, - <36>, <40>, <44>, - <46>, <51>, - <52>; - clock-output-names = "ahb_usbotg", "ahb_ehci", - "ahb_ohci", "ahb_ss", "ahb_dma", - "ahb_bist", "ahb_mmc0", "ahb_mmc1", - "ahb_mmc2", "ahb_nand", - "ahb_sdram", "ahb_emac", "ahb_spi0", - "ahb_spi1", "ahb_spi2", - "ahb_hstimer", "ahb_ve", "ahb_tve", - "ahb_lcd", "ahb_csi", "ahb_de_be", - "ahb_de_fe", "ahb_iep", - "ahb_mali400"; - }; - - apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb0>; - clock-indices = <0>, <3>, - <5>, <6>; - clock-output-names = "apb0_codec", "apb0_i2s0", - "apb0_pio", "apb0_ir"; - }; - - apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <17>, - <18>, <19>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_uart1", - "apb1_uart2", "apb1_uart3"; - }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - i2s0_clk: clk@01c200b8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200b8 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "i2s0"; - }; - - spdif_clk: clk@01c200c0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200c0 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "spdif"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_phy"; - }; - - dram_gates: clk@01c20100 { - #clock-cells = <1>; - compatible = "nextthing,gr8-dram-gates-clk", - "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c20100 0x4>; - clocks = <&pll5 0>; - clock-indices = <0>, - <1>, - <25>, - <26>, - <29>, - <31>; - clock-output-names = "dram_ve", - "dram_csi", - "dram_de_fe", - "dram_de_be", - "dram_ace", - "dram_iep"; - }; - - de_be_clk: clk@01c20104 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20104 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be"; - }; - - de_fe_clk: clk@01c2010c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c2010c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe"; - }; - - tcon_ch0_clk: clk@01c20118 { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c20118 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon-ch0-sclk"; - }; - - tcon_ch1_clk: clk@01c2012c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c2012c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon-ch1-sclk"; - }; - - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; - reg = <0x01c20140 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "codec"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mbus"; - }; - }; - - display-engine { - compatible = "allwinner,sun5i-a13-display-engine"; - allwinner,pipelines = <&fe0>; - }; - - soc@01c00000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - sram-controller@01c00000 { - compatible = "allwinner,sun4i-a10-sram-controller"; - reg = <0x01c00000 0x30>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - sram_a: sram@00000000 { - compatible = "mmio-sram"; - reg = <0x00000000 0xc000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x00000000 0xc000>; - }; - - sram_d: sram@00010000 { - compatible = "mmio-sram"; - reg = <0x00010000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x00010000 0x1000>; - - otg_sram: sram-section@0000 { - compatible = "allwinner,sun4i-a10-sram-d"; - reg = <0x0000 0x1000>; - status = "disabled"; - }; - }; - }; - - dma: dma-controller@01c02000 { - compatible = "allwinner,sun4i-a10-dma"; - reg = <0x01c02000 0x1000>; - interrupts = <27>; - clocks = <&ahb_gates 6>; - #dma-cells = <2>; - }; - - nfc: nand@01c03000 { - compatible = "allwinner,sun4i-a10-nand"; - reg = <0x01c03000 0x1000>; - interrupts = <37>; - clocks = <&ahb_gates 13>, <&nand_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 3>; - dma-names = "rxtx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi0: spi@01c05000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c05000 0x1000>; - interrupts = <10>; - clocks = <&ahb_gates 20>, <&spi0_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 27>, - <&dma SUN4I_DMA_DEDICATED 26>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@01c06000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c06000 0x1000>; - interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 9>, - <&dma SUN4I_DMA_DEDICATED 8>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - tve0: tv-encoder@01c0a000 { - compatible = "allwinner,sun4i-a10-tv-encoder"; - reg = <0x01c0a000 0x1000>; - clocks = <&ahb_gates 34>; - resets = <&tcon_ch0_clk 0>; - status = "disabled"; - - port { - #address-cells = <1>; - #size-cells = <0>; - - tve0_in_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_out_tve0>; - }; - }; - }; - - tcon0: lcd-controller@01c0c000 { - compatible = "allwinner,sun5i-a13-tcon"; - reg = <0x01c0c000 0x1000>; - interrupts = <44>; - resets = <&tcon_ch0_clk 1>; - reset-names = "lcd"; - clocks = <&ahb_gates 36>, - <&tcon_ch0_clk>, - <&tcon_ch1_clk>; - clock-names = "ahb", - "tcon-ch0", - "tcon-ch1"; - clock-output-names = "tcon-pixel-clock"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tcon0_in_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_out_tcon0>; - }; - }; - - tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tcon0_out_tve0: endpoint@1 { - reg = <1>; - remote-endpoint = <&tve0_in_tcon0>; - }; - }; - }; - }; - - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <32>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <33>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <34>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - usb_otg: usb@01c13000 { - compatible = "allwinner,sun4i-a10-musb"; - reg = <0x01c13000 0x0400>; - clocks = <&ahb_gates 0>; - interrupts = <38>; - interrupt-names = "mc"; - phys = <&usbphy 0>; - phy-names = "usb"; - extcon = <&usbphy 0>; - allwinner,sram = <&otg_sram 1>; - status = "disabled"; - - dr_mode = "otg"; - }; - - usbphy: phy@01c13400 { - #phy-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4>; - reg-names = "phy_ctrl", "pmu1"; - clocks = <&usb_clk 8>; - clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>; - reset-names = "usb0_reset", "usb1_reset"; - status = "disabled"; - }; - - ehci0: usb@01c14000 { - compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; - reg = <0x01c14000 0x100>; - interrupts = <39>; - clocks = <&ahb_gates 1>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci0: usb@01c14400 { - compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; - reg = <0x01c14400 0x100>; - interrupts = <40>; - clocks = <&usb_clk 6>, <&ahb_gates 2>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - spi2: spi@01c17000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c17000 0x1000>; - interrupts = <12>; - clocks = <&ahb_gates 22>, <&spi2_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 29>, - <&dma SUN4I_DMA_DEDICATED 28>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-a10-ic"; - reg = <0x01c20400 0x400>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - pio: pinctrl@01c20800 { - compatible = "nextthing,gr8-pinctrl"; - reg = <0x01c20800 0x400>; - interrupts = <28>; - clocks = <&apb0_gates 5>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <3>; - #gpio-cells = <3>; - - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB15", "PB16"; - allwinner,function = "i2c1"; - allwinner,drive = ; - allwinner,pull = ; - }; - - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB17", "PB18"; - allwinner,function = "i2c2"; - allwinner,drive = ; - allwinner,pull = ; - }; - - i2s0_data_pins_a: i2s0-data@0 { - allwinner,pins = "PB6", "PB7", "PB8", "PB9"; - allwinner,function = "i2s0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - i2s0_mclk_pins_a: i2s0-mclk@0 { - allwinner,pins = "PB6", "PB7", "PB8", "PB9"; - allwinner,function = "i2s0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - lcd_rgb666_pins: lcd-rgb666@0 { - allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", - "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", - "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", - "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "lcd0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", "PF3", - "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - nand_pins_a: nand-base0@0 { - allwinner,pins = "PC0", "PC1", "PC2", - "PC5", "PC8", "PC9", "PC10", - "PC11", "PC12", "PC13", "PC14", - "PC15"; - allwinner,function = "nand0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - nand_cs0_pins_a: nand-cs@0 { - allwinner,pins = "PC4"; - allwinner,function = "nand0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - nand_rb0_pins_a: nand-rb@0 { - allwinner,pins = "PC6"; - allwinner,function = "nand0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - spdif_tx_pins_a: spdif@0 { - allwinner,pins = "PB10"; - allwinner,function = "spdif"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart1_pins_a: uart1@1 { - allwinner,pins = "PG3", "PG4"; - allwinner,function = "uart1"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart1_cts_rts_pins_a: uart1-cts-rts@0 { - allwinner,pins = "PG5", "PG6"; - allwinner,function = "uart1"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; - - pwm: pwm@01c20e00 { - compatible = "allwinner,sun5i-a10s-pwm"; - reg = <0x01c20e00 0xc>; - clocks = <&osc24M>; - #pwm-cells = <3>; - status = "disabled"; - }; - - timer@01c20c00 { - compatible = "allwinner,sun4i-a10-timer"; - reg = <0x01c20c00 0x90>; - interrupts = <22>; - clocks = <&osc24M>; - }; - - wdt: watchdog@01c20c90 { - compatible = "allwinner,sun4i-a10-wdt"; - reg = <0x01c20c90 0x10>; - }; - - spdif: spdif@01c21000 { - #sound-dai-cells = <0>; - compatible = "allwinner,sun4i-a10-spdif"; - reg = <0x01c21000 0x400>; - interrupts = <13>; - clocks = <&apb0_gates 1>, <&spdif_clk>; - clock-names = "apb", "spdif"; - dmas = <&dma SUN4I_DMA_NORMAL 2>, - <&dma SUN4I_DMA_NORMAL 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - ir0: ir@01c21800 { - compatible = "allwinner,sun4i-a10-ir"; - clocks = <&apb0_gates 6>, <&ir0_clk>; - clock-names = "apb", "ir"; - interrupts = <5>; - reg = <0x01c21800 0x40>; - status = "disabled"; - }; - - i2s0: i2s@01c22400 { - #sound-dai-cells = <0>; - compatible = "allwinner,sun4i-a10-i2s"; - reg = <0x01c22400 0x400>; - interrupts = <16>; - clocks = <&apb0_gates 3>, <&i2s0_clk>; - clock-names = "apb", "mod"; - dmas = <&dma SUN4I_DMA_NORMAL 3>, - <&dma SUN4I_DMA_NORMAL 3>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - lradc: lradc@01c22800 { - compatible = "allwinner,sun4i-a10-lradc-keys"; - reg = <0x01c22800 0x100>; - interrupts = <31>; - status = "disabled"; - }; - - codec: codec@01c22c00 { - #sound-dai-cells = <0>; - compatible = "allwinner,sun4i-a10-codec"; - reg = <0x01c22c00 0x40>; - interrupts = <30>; - clocks = <&apb0_gates 0>, <&codec_clk>; - clock-names = "apb", "codec"; - dmas = <&dma SUN4I_DMA_NORMAL 19>, - <&dma SUN4I_DMA_NORMAL 19>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - rtp: rtp@01c25000 { - compatible = "allwinner,sun5i-a13-ts"; - reg = <0x01c25000 0x100>; - interrupts = <29>; - #thermal-sensor-cells = <0>; - }; - - uart1: serial@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = <2>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 17>; - status = "disabled"; - }; - - uart2: serial@01c28800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28800 0x400>; - interrupts = <3>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 18>; - status = "disabled"; - }; - - i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun4i-a10-i2c"; - reg = <0x01c2ac00 0x400>; - interrupts = <7>; - clocks = <&apb1_gates 0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c1: i2c@01c2b000 { - compatible = "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = <8>; - clocks = <&apb1_gates 1>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c2: i2c@01c2b400 { - compatible = "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b400 0x400>; - interrupts = <9>; - clocks = <&apb1_gates 2>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - timer@01c60000 { - compatible = "allwinner,sun5i-a13-hstimer"; - reg = <0x01c60000 0x1000>; - interrupts = <82>, <83>; - clocks = <&ahb_gates 28>; - }; - - fe0: display-frontend@01e00000 { - compatible = "allwinner,sun5i-a13-display-frontend"; - reg = <0x01e00000 0x20000>; - interrupts = <47>; - clocks = <&ahb_gates 46>, <&de_fe_clk>, - <&dram_gates 25>; - clock-names = "ahb", "mod", - "ram"; - resets = <&de_fe_clk>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - fe0_out_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_in_fe0>; - }; - }; - }; - }; - - be0: display-backend@01e60000 { - compatible = "allwinner,sun5i-a13-display-backend"; - reg = <0x01e60000 0x10000>; - clocks = <&ahb_gates 44>, <&de_be_clk>, - <&dram_gates 26>; - clock-names = "ahb", "mod", - "ram"; - resets = <&de_be_clk>; - status = "disabled"; - - assigned-clocks = <&de_be_clk>; - assigned-clock-rates = <300000000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - be0_in_fe0: endpoint@0 { - reg = <0>; - remote-endpoint = <&fe0_out_be0>; - }; - }; - - be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - be0_out_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_in_be0>; - }; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts new file mode 100644 index 000000000000..714381fd64d7 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts @@ -0,0 +1,342 @@ +/* + * Copyright 2016 Free Electrons + * Copyright 2016 NextThing Co + * + * Mylène Josserand + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-gr8.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "NextThing GR8-EVB"; + compatible = "nextthing,gr8-evb", "nextthing,gr8"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + serial0 = &uart1; + serial1 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 10000 0>; + enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; + + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + }; +}; + +&be0 { + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + + /* + * The interrupt is routed through the "External Fast + * Interrupt Request" pin (ball G13 of the module) + * directly to the main interrupt controller, without + * any other controller interfering. + */ + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + wm8978: codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8978"; + reg = <0x1a>; + }; + + pcf8563: rtc@51 { + compatible = "phg,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&i2s0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@190 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <190000>; + }; + + button@390 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <390000>; + }; + + button@600 { + label = "Menu"; + linux,code = ; + channel = <0>; + voltage = <600000>; + }; + + button@800 { + label = "Search"; + linux,code = ; + channel = <0>; + voltage = <800000>; + }; + + button@980 { + label = "Home"; + linux,code = ; + channel = <0>; + voltage = <980000>; + }; + + button@1180 { + label = "Esc"; + linux,code = ; + channel = <0>; + voltage = <1180000>; + }; + + button@1400 { + label = "Enter"; + linux,code = ; + channel = <0>; + voltage = <1400000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gr8_evb>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; + + /* MLC Support sucks for now */ + status = "disabled"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_gr8_evb: mmc0-cd-pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_id_pin_gr8_evb: usb0-id-pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_det_pin_gr8_evb: usb0-vbus-det-pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb1_vbus_pin_gr8_evb: usb1-vbus-pin@0 { + allwinner,pins = "PG13"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; +}; + +®_dcdc2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; + regulator-always-on; +}; + +®_dcdc3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-sys"; + regulator-always-on; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; + regulator-always-on; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_gr8_evb>; + gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&rtp { + allwinner,ts-attached; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pins_a>; + status = "okay"; +}; + +&tve0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>; + status = "okay"; +}; + +&usb_otg { + /* + * The GR8-EVB has a somewhat interesting design. There's a + * pin supposed to control VBUS, an ID pin, a VBUS detect pin, + * so everything should work just fine. + * + * Except that the pin supposed to control VBUS is not + * connected to any controllable output, neither to the SoC + * through a GPIO or to the PMIC, and it is pulled down, + * meaning that we will never be able to enable VBUS on this + * board. + */ + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_pin_gr8_evb>, <&usb0_vbus_det_pin_gr8_evb>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/sun5i-gr8.dtsi new file mode 100644 index 000000000000..ca54e03ef366 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-gr8.dtsi @@ -0,0 +1,1087 @@ +/* + * Copyright 2016 Mylène Josserand + * + * Mylène Josserand + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0x0>; + clocks = <&cpu>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * This is a dummy clock, to be used as placeholder on + * other mux clocks when a specific parent clock is not + * yet implemented. It should be dropped when the driver + * is complete. + */ + dummy: dummy { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + osc24M: clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-osc-clk"; + reg = <0x01c20050 0x4>; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc3M: osc3M-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "osc3M"; + }; + + osc32k: clk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + pll1: clk@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll1"; + }; + + pll2: clk@01c20008 { + #clock-cells = <1>; + compatible = "allwinner,sun5i-a13-pll2-clk"; + reg = <0x01c20008 0x8>; + clocks = <&osc24M>; + clock-output-names = "pll2-1x", "pll2-2x", + "pll2-4x", "pll2-8x"; + }; + + pll3: clk@01c20010 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20010 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll3"; + }; + + pll3x2: pll3x2-clk { + compatible = "allwinner,sun4i-a10-pll3-2x-clk"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <2>; + clocks = <&pll3>; + clock-output-names = "pll3-2x"; + }; + + pll4: clk@01c20018 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll1-clk"; + reg = <0x01c20018 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll4"; + }; + + pll5: clk@01c20020 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll5-clk"; + reg = <0x01c20020 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll5_ddr", "pll5_other"; + }; + + pll6: clk@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6_sata", "pll6_other", "pll6"; + }; + + pll7: clk@01c20030 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20030 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll7"; + }; + + pll7x2: pll7x2-clk { + compatible = "allwinner,sun4i-a10-pll3-2x-clk"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <2>; + clocks = <&pll7>; + clock-output-names = "pll7-2x"; + }; + + /* dummy is 200M */ + cpu: cpu@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-cpu-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; + clock-output-names = "cpu"; + }; + + axi: axi@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-axi-clk"; + reg = <0x01c20054 0x4>; + clocks = <&cpu>; + clock-output-names = "axi"; + }; + + ahb: ahb@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun5i-a13-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&axi>, <&cpu>, <&pll6 1>; + clock-output-names = "ahb"; + /* + * Use PLL6 as parent, instead of CPU/AXI + * which has rate changes due to cpufreq + */ + assigned-clocks = <&ahb>; + assigned-clock-parents = <&pll6 1>; + }; + + apb0: apb0@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb>; + clock-output-names = "apb0"; + }; + + apb1: clk@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; + clock-output-names = "apb1"; + }; + + axi_gates: clk@01c2005c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-gates-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&axi>; + clock-indices = <0>; + clock-output-names = "axi_dram"; + }; + + ahb_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun5i-a13-ahb-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb>; + clock-indices = <0>, <1>, + <2>, <5>, <6>, + <7>, <8>, <9>, + <10>, <13>, + <14>, <17>, <20>, + <21>, <22>, + <28>, <32>, <34>, + <36>, <40>, <44>, + <46>, <51>, + <52>; + clock-output-names = "ahb_usbotg", "ahb_ehci", + "ahb_ohci", "ahb_ss", "ahb_dma", + "ahb_bist", "ahb_mmc0", "ahb_mmc1", + "ahb_mmc2", "ahb_nand", + "ahb_sdram", "ahb_emac", "ahb_spi0", + "ahb_spi1", "ahb_spi2", + "ahb_hstimer", "ahb_ve", "ahb_tve", + "ahb_lcd", "ahb_csi", "ahb_de_be", + "ahb_de_fe", "ahb_iep", + "ahb_mali400"; + }; + + apb0_gates: clk@01c20068 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-gates-clk"; + reg = <0x01c20068 0x4>; + clocks = <&apb0>; + clock-indices = <0>, <3>, + <5>, <6>; + clock-output-names = "apb0_codec", "apb0_i2s0", + "apb0_pio", "apb0_ir"; + }; + + apb1_gates: clk@01c2006c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-gates-clk"; + reg = <0x01c2006c 0x4>; + clocks = <&apb1>; + clock-indices = <0>, <1>, + <2>, <17>, + <18>, <19>; + clock-output-names = "apb1_i2c0", "apb1_i2c1", + "apb1_i2c2", "apb1_uart1", + "apb1_uart2", "apb1_uart3"; + }; + + nand_clk: clk@01c20080 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20080 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "nand"; + }; + + ms_clk: clk@01c20084 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20084 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ms"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc1", + "mmc1_output", + "mmc1_sample"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc2", + "mmc2_output", + "mmc2_sample"; + }; + + ts_clk: clk@01c20098 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20098 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ts"; + }; + + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ss"; + }; + + spi0_clk: clk@01c200a0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi0"; + }; + + spi1_clk: clk@01c200a4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi1"; + }; + + spi2_clk: clk@01c200a8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a8 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi2"; + }; + + ir0_clk: clk@01c200b0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200b0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir0"; + }; + + i2s0_clk: clk@01c200b8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200b8 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "i2s0"; + }; + + spdif_clk: clk@01c200c0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200c0 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "spdif"; + }; + + usb_clk: clk@01c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun5i-a13-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&pll6 1>; + clock-output-names = "usb_ohci0", "usb_phy"; + }; + + dram_gates: clk@01c20100 { + #clock-cells = <1>; + compatible = "nextthing,gr8-dram-gates-clk", + "allwinner,sun4i-a10-gates-clk"; + reg = <0x01c20100 0x4>; + clocks = <&pll5 0>; + clock-indices = <0>, + <1>, + <25>, + <26>, + <29>, + <31>; + clock-output-names = "dram_ve", + "dram_csi", + "dram_de_fe", + "dram_de_be", + "dram_ace", + "dram_iep"; + }; + + de_be_clk: clk@01c20104 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20104 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be"; + }; + + de_fe_clk: clk@01c2010c { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c2010c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe"; + }; + + tcon_ch0_clk: clk@01c20118 { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c20118 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon-ch0-sclk"; + }; + + tcon_ch1_clk: clk@01c2012c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c2012c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon-ch1-sclk"; + }; + + codec_clk: clk@01c20140 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-codec-clk"; + reg = <0x01c20140 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "codec"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun5i-a13-mbus-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mbus"; + }; + }; + + display-engine { + compatible = "allwinner,sun5i-a13-display-engine"; + allwinner,pipelines = <&fe0>; + }; + + soc@01c00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram-controller@01c00000 { + compatible = "allwinner,sun4i-a10-sram-controller"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_a: sram@00000000 { + compatible = "mmio-sram"; + reg = <0x00000000 0xc000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00000000 0xc000>; + }; + + sram_d: sram@00010000 { + compatible = "mmio-sram"; + reg = <0x00010000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00010000 0x1000>; + + otg_sram: sram-section@0000 { + compatible = "allwinner,sun4i-a10-sram-d"; + reg = <0x0000 0x1000>; + status = "disabled"; + }; + }; + }; + + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + + nfc: nand@01c03000 { + compatible = "allwinner,sun4i-a10-nand"; + reg = <0x01c03000 0x1000>; + interrupts = <37>; + clocks = <&ahb_gates 13>, <&nand_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 3>; + dma-names = "rxtx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi0: spi@01c05000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c05000 0x1000>; + interrupts = <10>; + clocks = <&ahb_gates 20>, <&spi0_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 27>, + <&dma SUN4I_DMA_DEDICATED 26>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@01c06000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c06000 0x1000>; + interrupts = <11>; + clocks = <&ahb_gates 21>, <&spi1_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 9>, + <&dma SUN4I_DMA_DEDICATED 8>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + tve0: tv-encoder@01c0a000 { + compatible = "allwinner,sun4i-a10-tv-encoder"; + reg = <0x01c0a000 0x1000>; + clocks = <&ahb_gates 34>; + resets = <&tcon_ch0_clk 0>; + status = "disabled"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + tve0_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_tve0>; + }; + }; + }; + + tcon0: lcd-controller@01c0c000 { + compatible = "allwinner,sun5i-a13-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <44>; + resets = <&tcon_ch0_clk 1>; + reset-names = "lcd"; + clocks = <&ahb_gates 36>, + <&tcon_ch0_clk>, + <&tcon_ch1_clk>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon-pixel-clock"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon0_out_tve0: endpoint@1 { + reg = <1>; + remote-endpoint = <&tve0_in_tcon0>; + }; + }; + }; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, + <&mmc0_clk 0>, + <&mmc0_clk 1>, + <&mmc0_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + interrupts = <32>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb_gates 9>, + <&mmc1_clk 0>, + <&mmc1_clk 1>, + <&mmc1_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + interrupts = <33>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, + <&mmc2_clk 0>, + <&mmc2_clk 1>, + <&mmc2_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + interrupts = <34>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + usb_otg: usb@01c13000 { + compatible = "allwinner,sun4i-a10-musb"; + reg = <0x01c13000 0x0400>; + clocks = <&ahb_gates 0>; + interrupts = <38>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + allwinner,sram = <&otg_sram 1>; + status = "disabled"; + + dr_mode = "otg"; + }; + + usbphy: phy@01c13400 { + #phy-cells = <1>; + compatible = "allwinner,sun5i-a13-usb-phy"; + reg = <0x01c13400 0x10 0x01c14800 0x4>; + reg-names = "phy_ctrl", "pmu1"; + clocks = <&usb_clk 8>; + clock-names = "usb_phy"; + resets = <&usb_clk 0>, <&usb_clk 1>; + reset-names = "usb0_reset", "usb1_reset"; + status = "disabled"; + }; + + ehci0: usb@01c14000 { + compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; + reg = <0x01c14000 0x100>; + interrupts = <39>; + clocks = <&ahb_gates 1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci0: usb@01c14400 { + compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; + reg = <0x01c14400 0x100>; + interrupts = <40>; + clocks = <&usb_clk 6>, <&ahb_gates 2>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + spi2: spi@01c17000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c17000 0x1000>; + interrupts = <12>; + clocks = <&ahb_gates 22>, <&spi2_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 29>, + <&dma SUN4I_DMA_DEDICATED 28>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + intc: interrupt-controller@01c20400 { + compatible = "allwinner,sun4i-a10-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + pio: pinctrl@01c20800 { + compatible = "nextthing,gr8-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <28>; + clocks = <&apb0_gates 5>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB15", "PB16"; + allwinner,function = "i2c1"; + allwinner,drive = ; + allwinner,pull = ; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB17", "PB18"; + allwinner,function = "i2c2"; + allwinner,drive = ; + allwinner,pull = ; + }; + + i2s0_data_pins_a: i2s0-data@0 { + allwinner,pins = "PB6", "PB7", "PB8", "PB9"; + allwinner,function = "i2s0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + i2s0_mclk_pins_a: i2s0-mclk@0 { + allwinner,pins = "PB6", "PB7", "PB8", "PB9"; + allwinner,function = "i2s0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + ir0_rx_pins_a: ir0@0 { + allwinner,pins = "PB4"; + allwinner,function = "ir0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + lcd_rgb666_pins: lcd-rgb666@0 { + allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + allwinner,function = "lcd0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + nand_pins_a: nand-base0@0 { + allwinner,pins = "PC0", "PC1", "PC2", + "PC5", "PC8", "PC9", "PC10", + "PC11", "PC12", "PC13", "PC14", + "PC15"; + allwinner,function = "nand0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + nand_cs0_pins_a: nand-cs@0 { + allwinner,pins = "PC4"; + allwinner,function = "nand0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + nand_rb0_pins_a: nand-rb@0 { + allwinner,pins = "PC6"; + allwinner,function = "nand0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + pwm0_pins_a: pwm0@0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + spdif_tx_pins_a: spdif@0 { + allwinner,pins = "PB10"; + allwinner,function = "spdif"; + allwinner,drive = ; + allwinner,pull = ; + }; + + uart1_pins_a: uart1@1 { + allwinner,pins = "PG3", "PG4"; + allwinner,function = "uart1"; + allwinner,drive = ; + allwinner,pull = ; + }; + + uart1_cts_rts_pins_a: uart1-cts-rts@0 { + allwinner,pins = "PG5", "PG6"; + allwinner,function = "uart1"; + allwinner,drive = ; + allwinner,pull = ; + }; + }; + + pwm: pwm@01c20e00 { + compatible = "allwinner,sun5i-a10s-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <22>; + clocks = <&osc24M>; + }; + + wdt: watchdog@01c20c90 { + compatible = "allwinner,sun4i-a10-wdt"; + reg = <0x01c20c90 0x10>; + }; + + spdif: spdif@01c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-spdif"; + reg = <0x01c21000 0x400>; + interrupts = <13>; + clocks = <&apb0_gates 1>, <&spdif_clk>; + clock-names = "apb", "spdif"; + dmas = <&dma SUN4I_DMA_NORMAL 2>, + <&dma SUN4I_DMA_NORMAL 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ir0: ir@01c21800 { + compatible = "allwinner,sun4i-a10-ir"; + clocks = <&apb0_gates 6>, <&ir0_clk>; + clock-names = "apb", "ir"; + interrupts = <5>; + reg = <0x01c21800 0x40>; + status = "disabled"; + }; + + i2s0: i2s@01c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c22400 0x400>; + interrupts = <16>; + clocks = <&apb0_gates 3>, <&i2s0_clk>; + clock-names = "apb", "mod"; + dmas = <&dma SUN4I_DMA_NORMAL 3>, + <&dma SUN4I_DMA_NORMAL 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + status = "disabled"; + }; + + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-codec"; + reg = <0x01c22c00 0x40>; + interrupts = <30>; + clocks = <&apb0_gates 0>, <&codec_clk>; + clock-names = "apb", "codec"; + dmas = <&dma SUN4I_DMA_NORMAL 19>, + <&dma SUN4I_DMA_NORMAL 19>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + rtp: rtp@01c25000 { + compatible = "allwinner,sun5i-a13-ts"; + reg = <0x01c25000 0x100>; + interrupts = <29>; + #thermal-sensor-cells = <0>; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <2>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 17>; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <3>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 18>; + status = "disabled"; + }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun4i-a10-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <7>; + clocks = <&apb1_gates 0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun4i-a10-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <8>; + clocks = <&apb1_gates 1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun4i-a10-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <9>; + clocks = <&apb1_gates 2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + timer@01c60000 { + compatible = "allwinner,sun5i-a13-hstimer"; + reg = <0x01c60000 0x1000>; + interrupts = <82>, <83>; + clocks = <&ahb_gates 28>; + }; + + fe0: display-frontend@01e00000 { + compatible = "allwinner,sun5i-a13-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = <47>; + clocks = <&ahb_gates 46>, <&de_fe_clk>, + <&dram_gates 25>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_fe_clk>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + }; + }; + }; + + be0: display-backend@01e60000 { + compatible = "allwinner,sun5i-a13-display-backend"; + reg = <0x01e60000 0x10000>; + clocks = <&ahb_gates 44>, <&de_be_clk>, + <&dram_gates 26>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_be_clk>; + status = "disabled"; + + assigned-clocks = <&de_be_clk>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be0>; + }; + }; + }; + }; + }; +}; -- cgit v1.2.3 From 86b4522d19329b3bf9c05722f217568b803439f7 Mon Sep 17 00:00:00 2001 From: Loic Pallardy Date: Wed, 16 Nov 2016 13:57:00 +0100 Subject: ARM: dts: STiH407-family: fix i2c nodes The I2C nodes are missing #address-cells and #size-cells. This is causing warning at device tree compilation when some I2C device sub-nodes are defined. Signed-off-by: Loic Pallardy --- arch/arm/boot/dts/stih407-family.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 91096a49efa9..8f79b4147bba 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -283,6 +283,8 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -296,6 +298,8 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -309,6 +313,8 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -322,6 +328,8 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -335,6 +343,8 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -348,6 +358,8 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c5_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -363,6 +375,8 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c10_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -376,6 +390,8 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c11_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; -- cgit v1.2.3 From 4c9456df8849204435c4de1849120b916975d75d Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Tue, 29 Nov 2016 14:45:10 -0600 Subject: arm64: dts: juno: Correct PCI IO window The PCIe root complex on Juno translates the MMIO mapped at 0x5f800000 to the PIO address range starting at 0 (which is common because PIO addresses are generally < 64k). Correct the DT to reflect this. Signed-off-by: Jeremy Linton Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/arm/juno-base.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 334271a25f70..7d3a2acc6a55 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -393,7 +393,7 @@ #address-cells = <3>; #size-cells = <2>; dma-coherent; - ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>, + ranges = <0x01000000 0x00 0x00000000 0x00 0x5f800000 0x0 0x00800000>, <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; #interrupt-cells = <1>; -- cgit v1.2.3 From 909e481e2467f202b97d42beef246e8829416a85 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Wed, 16 Nov 2016 17:31:31 +0000 Subject: arm64: dts: juno: fix cluster sleep state entry latency on all SoC versions The core and the cluster sleep state entry latencies can't be same as cluster sleep involves more work compared to core level e.g. shared cache maintenance. Experiments have shown on an average about 100us more latency for the cluster sleep state compared to the core level sleep. This patch fixes the entry latency for the cluster sleep state. Fixes: 28e10a8f3a03 ("arm64: dts: juno: Add idle-states to device tree") Cc: Lorenzo Pieralisi Cc: "Jon Medhurst (Tixy)" Reviewed-by: Liviu Dudau Signed-off-by: Sudeep Holla Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/arm/juno-r1.dts | 2 +- arch/arm64/boot/dts/arm/juno-r2.dts | 2 +- arch/arm64/boot/dts/arm/juno.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index 123a58b29cbd..f0b857d6d73c 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -76,7 +76,7 @@ compatible = "arm,idle-state"; arm,psci-suspend-param = <0x1010000>; local-timer-stop; - entry-latency-us = <300>; + entry-latency-us = <400>; exit-latency-us = <1200>; min-residency-us = <2500>; }; diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts index 007be826efce..26aaa6a7670f 100644 --- a/arch/arm64/boot/dts/arm/juno-r2.dts +++ b/arch/arm64/boot/dts/arm/juno-r2.dts @@ -76,7 +76,7 @@ compatible = "arm,idle-state"; arm,psci-suspend-param = <0x1010000>; local-timer-stop; - entry-latency-us = <300>; + entry-latency-us = <400>; exit-latency-us = <1200>; min-residency-us = <2500>; }; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index a7270eff6939..6e154d948a80 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -76,7 +76,7 @@ compatible = "arm,idle-state"; arm,psci-suspend-param = <0x1010000>; local-timer-stop; - entry-latency-us = <300>; + entry-latency-us = <400>; exit-latency-us = <1200>; min-residency-us = <2500>; }; -- cgit v1.2.3