From 8792f7cf4368f9bc337eee65851d8e7abbbf946c Mon Sep 17 00:00:00 2001 From: Kim Kyuwon Date: Wed, 10 Jun 2009 12:48:50 -0700 Subject: leds: add the sysfs interface into the leds-bd2802 driver for changing wave pattern and led current. Allow the user application to change the wave pattern and led current by 'wave_pattern' and 'rgb_current' sysfs files. Signed-off-by: Kim Kyuwon Signed-off-by: Andrew Morton Signed-off-by: Richard Purdie --- drivers/leds/leds-bd2802.c | 86 +++++++++++++++++++++++++++++++++++++++------- 1 file changed, 73 insertions(+), 13 deletions(-) diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c index 7a03efd54f69..779d7f262c04 100644 --- a/drivers/leds/leds-bd2802.c +++ b/drivers/leds/leds-bd2802.c @@ -97,6 +97,10 @@ struct bd2802_led { enum led_ids led_id; enum led_colors color; enum led_bits state; + + /* General attributes of RGB LEDs */ + int wave_pattern; + int rgb_current; }; @@ -254,7 +258,7 @@ static void bd2802_set_on(struct bd2802_led *led, enum led_ids id, bd2802_reset_cancel(led); reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP); - bd2802_write_byte(led->client, reg, BD2802_CURRENT_032); + bd2802_write_byte(led->client, reg, led->rgb_current); reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP); bd2802_write_byte(led->client, reg, BD2802_CURRENT_000); reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN); @@ -275,9 +279,9 @@ static void bd2802_set_blink(struct bd2802_led *led, enum led_ids id, reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP); bd2802_write_byte(led->client, reg, BD2802_CURRENT_000); reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP); - bd2802_write_byte(led->client, reg, BD2802_CURRENT_032); + bd2802_write_byte(led->client, reg, led->rgb_current); reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN); - bd2802_write_byte(led->client, reg, BD2802_PATTERN_HALF); + bd2802_write_byte(led->client, reg, led->wave_pattern); bd2802_enable(led, id); bd2802_update_state(led, id, color, BD2802_BLINK); @@ -406,7 +410,7 @@ static void bd2802_enable_adv_conf(struct bd2802_led *led) ret = device_create_file(&led->client->dev, bd2802_addr_attributes[i]); if (ret) { - dev_err(&led->client->dev, "failed to sysfs file %s\n", + dev_err(&led->client->dev, "failed: sysfs file %s\n", bd2802_addr_attributes[i]->attr.name); goto failed_remove_files; } @@ -483,6 +487,52 @@ static struct device_attribute bd2802_adv_conf_attr = { .store = bd2802_store_adv_conf, }; +#define BD2802_CONTROL_ATTR(attr_name, name_str) \ +static ssize_t bd2802_show_##attr_name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\ + ssize_t ret; \ + down_read(&led->rwsem); \ + ret = sprintf(buf, "0x%02x\n", led->attr_name); \ + up_read(&led->rwsem); \ + return ret; \ +} \ +static ssize_t bd2802_store_##attr_name(struct device *dev, \ + struct device_attribute *attr, const char *buf, size_t count) \ +{ \ + struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\ + unsigned long val; \ + int ret; \ + if (!count) \ + return -EINVAL; \ + ret = strict_strtoul(buf, 16, &val); \ + if (ret) \ + return ret; \ + down_write(&led->rwsem); \ + led->attr_name = val; \ + up_write(&led->rwsem); \ + return count; \ +} \ +static struct device_attribute bd2802_##attr_name##_attr = { \ + .attr = { \ + .name = name_str, \ + .mode = 0644, \ + .owner = THIS_MODULE \ + }, \ + .show = bd2802_show_##attr_name, \ + .store = bd2802_store_##attr_name, \ +}; + +BD2802_CONTROL_ATTR(wave_pattern, "wave_pattern"); +BD2802_CONTROL_ATTR(rgb_current, "rgb_current"); + +static struct device_attribute *bd2802_attributes[] = { + &bd2802_adv_conf_attr, + &bd2802_wave_pattern_attr, + &bd2802_rgb_current_attr, +}; + static void bd2802_led_work(struct work_struct *work) { struct bd2802_led *led = container_of(work, struct bd2802_led, work); @@ -635,7 +685,7 @@ static int __devinit bd2802_probe(struct i2c_client *client, { struct bd2802_led *led; struct bd2802_led_platform_data *pdata; - int ret; + int ret, i; led = kzalloc(sizeof(struct bd2802_led), GFP_KERNEL); if (!led) { @@ -665,13 +715,20 @@ static int __devinit bd2802_probe(struct i2c_client *client, /* To save the power, reset BD2802 after detecting */ gpio_set_value(led->pdata->reset_gpio, 0); + /* Default attributes */ + led->wave_pattern = BD2802_PATTERN_HALF; + led->rgb_current = BD2802_CURRENT_032; + init_rwsem(&led->rwsem); - ret = device_create_file(&client->dev, &bd2802_adv_conf_attr); - if (ret) { - dev_err(&client->dev, "failed to create sysfs file %s\n", - bd2802_adv_conf_attr.attr.name); - goto failed_free; + for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) { + ret = device_create_file(&led->client->dev, + bd2802_attributes[i]); + if (ret) { + dev_err(&led->client->dev, "failed: sysfs file %s\n", + bd2802_attributes[i]->attr.name); + goto failed_unregister_dev_file; + } } ret = bd2802_register_led_classdev(led); @@ -681,7 +738,8 @@ static int __devinit bd2802_probe(struct i2c_client *client, return 0; failed_unregister_dev_file: - device_remove_file(&client->dev, &bd2802_adv_conf_attr); + for (i--; i >= 0; i--) + device_remove_file(&led->client->dev, bd2802_attributes[i]); failed_free: i2c_set_clientdata(client, NULL); kfree(led); @@ -692,12 +750,14 @@ failed_free: static int __exit bd2802_remove(struct i2c_client *client) { struct bd2802_led *led = i2c_get_clientdata(client); + int i; - bd2802_unregister_led_classdev(led); gpio_set_value(led->pdata->reset_gpio, 0); + bd2802_unregister_led_classdev(led); if (led->adf_on) bd2802_disable_adv_conf(led); - device_remove_file(&client->dev, &bd2802_adv_conf_attr); + for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) + device_remove_file(&led->client->dev, bd2802_attributes[i]); i2c_set_clientdata(client, NULL); kfree(led); -- cgit v1.2.3