From 80ed89f6105fd2f35b3b9ee2078f31e1510da71e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 17 Nov 2005 09:46:28 -0800 Subject: [PATCH] USB Serial: rename ChangeLog.old People are complaining about a .old file in the tree. So rename drivers/usb/serial/ChangeLog.old to ChangeLog.history. Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/serial/ChangeLog.history | 730 +++++++++++++++++++++++++++++++++++ drivers/usb/serial/ChangeLog.old | 730 ----------------------------------- 2 files changed, 730 insertions(+), 730 deletions(-) create mode 100644 drivers/usb/serial/ChangeLog.history delete mode 100644 drivers/usb/serial/ChangeLog.old diff --git a/drivers/usb/serial/ChangeLog.history b/drivers/usb/serial/ChangeLog.history new file mode 100644 index 000000000000..52c4f7bd7a80 --- /dev/null +++ b/drivers/usb/serial/ChangeLog.history @@ -0,0 +1,730 @@ +This is the contents of some of the drivers/usb/serial/ files that had old +changelog comments. They were quite old, and out of date, and we don't keep +them anymore, so I've put them here, away from the source files, in case +people still care to see them. + +- Greg Kroah-Hartman October 20, 2005 + +----------------------------------------------------------------------- +usb-serial.h Change Log comments: + + (03/26/2002) gkh + removed the port->tty check from port_paranoia_check() due to serial + consoles not having a tty device assigned to them. + + (12/03/2001) gkh + removed active from the port structure. + added documentation to the usb_serial_device_type structure + + (10/10/2001) gkh + added vendor and product to serial structure. Needed to determine device + owner when the device is disconnected. + + (05/30/2001) gkh + added sem to port structure and removed port_lock + + (10/05/2000) gkh + Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help + fix bug with urb->dev not being set properly, now that the usb core + needs it. + + (09/11/2000) gkh + Added usb_serial_debug_data function to help get rid of #DEBUG in the + drivers. + + (08/28/2000) gkh + Added port_lock to port structure. + + (08/08/2000) gkh + Added open_count to port structure. + + (07/23/2000) gkh + Added bulk_out_endpointAddress to port structure. + + (07/19/2000) gkh, pberger, and borchers + Modifications to allow usb-serial drivers to be modules. + +----------------------------------------------------------------------- +usb-serial.c Change Log comments: + + (12/10/2002) gkh + Split the ports off into their own struct device, and added a + usb-serial bus driver. + + (11/19/2002) gkh + removed a few #ifdefs for the generic code and cleaned up the failure + logic in initialization. + + (10/02/2002) gkh + moved the console code to console.c and out of this file. + + (06/05/2002) gkh + moved location of startup() call in serial_probe() until after all + of the port information and endpoints are initialized. This makes + things easier for some drivers. + + (04/10/2002) gkh + added serial_read_proc function which creates a + /proc/tty/driver/usb-serial file. + + (03/27/2002) gkh + Got USB serial console code working properly and merged into the main + version of the tree. Thanks to Randy Dunlap for the initial version + of this code, and for pushing me to finish it up. + The USB serial console works with any usb serial driver device. + + (03/21/2002) gkh + Moved all manipulation of port->open_count into the core. Now the + individual driver's open and close functions are called only when the + first open() and last close() is called. Making the drivers a bit + smaller and simpler. + Fixed a bug if a driver didn't have the owner field set. + + (02/26/2002) gkh + Moved all locking into the main serial_* functions, instead of having + the individual drivers have to grab the port semaphore. This should + reduce races. + Reworked the MOD_INC logic a bit to always increment and decrement, even + if the generic driver is being used. + + (10/10/2001) gkh + usb_serial_disconnect() now sets the serial->dev pointer is to NULL to + help prevent child drivers from accessing the device since it is now + gone. + + (09/13/2001) gkh + Moved generic driver initialize after we have registered with the USB + core. Thanks to Randy Dunlap for pointing this problem out. + + (07/03/2001) gkh + Fixed module paramater size. Thanks to John Brockmeyer for the pointer. + Fixed vendor and product getting defined through the MODULE_PARM macro + if the Generic driver wasn't compiled in. + Fixed problem with generic_shutdown() not being called for drivers that + don't have a shutdown() function. + + (06/06/2001) gkh + added evil hack that is needed for the prolific pl2303 device due to the + crazy way its endpoints are set up. + + (05/30/2001) gkh + switched from using spinlock to a semaphore, which fixes lots of problems. + + (04/08/2001) gb + Identify version on module load. + + 2001_02_05 gkh + Fixed buffer overflows bug with the generic serial driver. Thanks to + Todd Squires for fixing this. + + (01/10/2001) gkh + Fixed bug where the generic serial adaptor grabbed _any_ device that was + offered to it. + + (12/12/2000) gkh + Removed MOD_INC and MOD_DEC from poll and disconnect functions, and + moved them to the serial_open and serial_close functions. + Also fixed bug with there not being a MOD_DEC for the generic driver + (thanks to Gary Brubaker for finding this.) + + (11/29/2000) gkh + Small NULL pointer initialization cleanup which saves a bit of disk image + + (11/01/2000) Adam J. Richter + instead of using idVendor/idProduct pairs, usb serial drivers + now identify their hardware interest with usb_device_id tables, + which they usually have anyhow for use with MODULE_DEVICE_TABLE. + + (10/05/2000) gkh + Fixed bug with urb->dev not being set properly, now that the usb + core needs it. + + (09/11/2000) gkh + Removed DEBUG #ifdefs with call to usb_serial_debug_data + + (08/28/2000) gkh + Added port_lock to port structure. + Added locks for SMP safeness to generic driver + Fixed the ability to open a generic device's port more than once. + + (07/23/2000) gkh + Added bulk_out_endpointAddress to port structure. + + (07/19/2000) gkh, pberger, and borchers + Modifications to allow usb-serial drivers to be modules. + + (07/03/2000) gkh + Added more debugging to serial_ioctl call + + (06/25/2000) gkh + Changed generic_write_bulk_callback to not call wake_up_interruptible + directly, but to have port_softint do it at a safer time. + + (06/23/2000) gkh + Cleaned up debugging statements in a quest to find UHCI timeout bug. + + (05/22/2000) gkh + Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be + removed from the individual device source files. + + (05/03/2000) gkh + Added the Digi Acceleport driver from Al Borchers and Peter Berger. + + (05/02/2000) gkh + Changed devfs and tty register code to work properly now. This was based on + the ACM driver changes by Vojtech Pavlik. + + (04/27/2000) Ryan VanderBijl + Put calls to *_paranoia_checks into one function. + + (04/23/2000) gkh + Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports. + Moved when the startup code printed out the devices that are supported. + + (04/19/2000) gkh + Added driver for ZyXEL omni.net lcd plus ISDN TA + Made startup info message specify which drivers were compiled in. + + (04/03/2000) gkh + Changed the probe process to remove the module unload races. + Changed where the tty layer gets initialized to have devfs work nicer. + Added initial devfs support. + + (03/26/2000) gkh + Split driver up into device specific pieces. + + (03/19/2000) gkh + Fixed oops that could happen when device was removed while a program + was talking to the device. + Removed the static urbs and now all urbs are created and destroyed + dynamically. + Reworked the internal interface. Now everything is based on the + usb_serial_port structure instead of the larger usb_serial structure. + This fixes the bug that a multiport device could not have more than + one port open at one time. + + (03/17/2000) gkh + Added config option for debugging messages. + Added patch for keyspan pda from Brian Warner. + + (03/06/2000) gkh + Added the keyspan pda code from Brian Warner + Moved a bunch of the port specific stuff into its own structure. This + is in anticipation of the true multiport devices (there's a bug if you + try to access more than one port of any multiport device right now) + + (02/21/2000) gkh + Made it so that any serial devices only have to specify which functions + they want to overload from the generic function calls (great, + inheritance in C, in a driver, just what I wanted...) + Added support for set_termios and ioctl function calls. No drivers take + advantage of this yet. + Removed the #ifdef MODULE, now there is no module specific code. + Cleaned up a few comments in usb-serial.h that were wrong (thanks again + to Miles Lott). + Small fix to get_free_serial. + + (02/14/2000) gkh + Removed the Belkin and Peracom functionality from the driver due to + the lack of support from the vendor, and me not wanting people to + accidenatly buy the device, expecting it to work with Linux. + Added read_bulk_callback and write_bulk_callback to the type structure + for the needs of the FTDI and WhiteHEAT driver. + Changed all reverences to FTDI to FTDI_SIO at the request of Bill + Ryder. + Changed the output urb size back to the max endpoint size to make + the ftdi_sio driver have it easier, and due to the fact that it didn't + really increase the speed any. + + (02/11/2000) gkh + Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a + patch from Miles Lott (milos@insync.net). + Fixed bug with not restoring the minor range that a device grabs, if + the startup function fails (thanks Miles for finding this). + + (02/05/2000) gkh + Added initial framework for the Keyspan PDA serial converter so that + Brian Warner has a place to put his code. + Made the ezusb specific functions generic enough that different + devices can use them (whiteheat and keyspan_pda both need them). + Split out a whole bunch of structure and other stuff to a separate + usb-serial.h file. + Made the Visor connection messages a little more understandable, now + that Miles Lott (milos@insync.net) has gotten the Generic channel to + work. Also made them always show up in the log file. + + (01/25/2000) gkh + Added initial framework for FTDI serial converter so that Bill Ryder + has a place to put his code. + Added the vendor specific info from Handspring. Now we can print out + informational debug messages as well as understand what is happening. + + (01/23/2000) gkh + Fixed problem of crash when trying to open a port that didn't have a + device assigned to it. Made the minor node finding a little smarter, + now it looks to find a continuous space for the new device. + + (01/21/2000) gkh + Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net) + Fixed get_serial_by_minor which was all messed up for multi port + devices. Fixed multi port problem for generic devices. Now the number + of ports is determined by the number of bulk out endpoints for the + generic device. + + (01/19/2000) gkh + Removed lots of cruft that was around from the old (pre urb) driver + interface. + Made the serial_table dynamic. This should save lots of memory when + the number of minor nodes goes up to 256. + Added initial support for devices that have more than one port. + Added more debugging comments for the Visor, and added a needed + set_configuration call. + + (01/17/2000) gkh + Fixed the WhiteHEAT firmware (my processing tool had a bug) + and added new debug loader firmware for it. + Removed the put_char function as it isn't really needed. + Added visor startup commands as found by the Win98 dump. + + (01/13/2000) gkh + Fixed the vendor id for the generic driver to the one I meant it to be. + + (01/12/2000) gkh + Forget the version numbering...that's pretty useless... + Made the driver able to be compiled so that the user can select which + converter they want to use. This allows people who only want the Visor + support to not pay the memory size price of the WhiteHEAT. + Fixed bug where the generic driver (idVendor=0000 and idProduct=0000) + grabbed the root hub. Not good. + + version 0.4.0 (01/10/2000) gkh + Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT + device. Added startup function to allow firmware to be downloaded to + a device if it needs to be. + Added firmware download logic to the WhiteHEAT device. + Started to add #defines to split up the different drivers for potential + configuration option. + + version 0.3.1 (12/30/99) gkh + Fixed problems with urb for bulk out. + Added initial support for multiple sets of endpoints. This enables + the Handspring Visor to be attached successfully. Only the first + bulk in / bulk out endpoint pair is being used right now. + + version 0.3.0 (12/27/99) gkh + Added initial support for the Handspring Visor based on a patch from + Miles Lott (milos@sneety.insync.net) + Cleaned up the code a bunch and converted over to using urbs only. + + version 0.2.3 (12/21/99) gkh + Added initial support for the Connect Tech WhiteHEAT converter. + Incremented the number of ports in expectation of getting the + WhiteHEAT to work properly (4 ports per connection). + Added notification on insertion and removal of what port the + device is/was connected to (and what kind of device it was). + + version 0.2.2 (12/16/99) gkh + Changed major number to the new allocated number. We're legal now! + + version 0.2.1 (12/14/99) gkh + Fixed bug that happens when device node is opened when there isn't a + device attached to it. Thanks to marek@webdesign.no for noticing this. + + version 0.2.0 (11/10/99) gkh + Split up internals to make it easier to add different types of serial + converters to the code. + Added a "generic" driver that gets it's vendor and product id + from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net) + for the idea and sample code (from the usb scanner driver.) + Cleared up any licensing questions by releasing it under the GNU GPL. + + version 0.1.2 (10/25/99) gkh + Fixed bug in detecting device. + + version 0.1.1 (10/05/99) gkh + Changed the major number to not conflict with anything else. + + version 0.1 (09/28/99) gkh + Can recognize the two different devices and start up a read from + device when asked to. Writes also work. No control signals yet, this + all is vendor specific data (i.e. no spec), also no control for + different baud rates or other bit settings. + Currently we are using the same devid as the acm driver. This needs + to change. + +----------------------------------------------------------------------- +visor.c Change Log comments: + + (06/03/2003) Judd Montgomery + Added support for module parameter options for untested/unknown + devices. + + (03/09/2003) gkh + Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl + for the information. + + (03/05/2003) gkh + Think Treo support is now working. + + (04/03/2002) gkh + Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI + for the information. + + (03/27/2002) gkh + Removed assumptions that port->tty was always valid (is not true + for usb serial console devices.) + + (03/23/2002) gkh + Added support for the Palm i705 device, thanks to Thomas Riemer + for the information. + + (03/21/2002) gkh + Added support for the Palm m130 device, thanks to Udo Eisenbarth + for the information. + + (02/27/2002) gkh + Reworked the urb handling logic. We have no more pool, but dynamically + allocate the urb and the transfer buffer on the fly. In testing this + does not incure any measurable overhead. This also relies on the fact + that we have proper reference counting logic for urbs. + + (02/21/2002) SilaS + Added initial support for the Palm m515 devices. + + (02/14/2002) gkh + Added support for the Clie S-360 device. + + (12/18/2001) gkh + Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand + for the patch. + + (11/11/2001) gkh + Added support for the m125 devices, and added check to prevent oopses + for Cli� devices that lie about the number of ports they have. + + (08/30/2001) gkh + Added support for the Clie devices, both the 3.5 and 4.0 os versions. + Many thanks to Daniel Burke, and Bryan Payne for helping with this. + + (08/23/2001) gkh + fixed a few potential bugs pointed out by Oliver Neukum. + + (05/30/2001) gkh + switched from using spinlock to a semaphore, which fixes lots of problems. + + (05/28/2000) gkh + Added initial support for the Palm m500 and Palm m505 devices. + + (04/08/2001) gb + Identify version on module load. + + (01/21/2000) gkh + Added write_room and chars_in_buffer, as they were previously using the + generic driver versions which is all wrong now that we are using an urb + pool. Thanks to Wolfgang Grandegger for pointing this out to me. + Removed count assignment in the write function, which was not needed anymore + either. Thanks to Al Borchers for pointing this out. + + (12/12/2000) gkh + Moved MOD_DEC to end of visor_close to be nicer, as the final write + message can sleep. + + (11/12/2000) gkh + Fixed bug with data being dropped on the floor by forcing tty->low_latency + to be on. Hopefully this fixes the OHCI issue! + + (11/01/2000) Adam J. Richter + usb_device_id table support + + (10/05/2000) gkh + Fixed bug with urb->dev not being set properly, now that the usb + core needs it. + + (09/11/2000) gkh + Got rid of always calling kmalloc for every urb we wrote out to the + device. + Added visor_read_callback so we can keep track of bytes in and out for + those people who like to know the speed of their device. + Removed DEBUG #ifdefs with call to usb_serial_debug_data + + (09/06/2000) gkh + Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_ + the host controller drivers set urb->dev = NULL when the urb is finished. + + (08/28/2000) gkh + Added locks for SMP safeness. + + (08/08/2000) gkh + Fixed endian problem in visor_startup. + Fixed MOD_INC and MOD_DEC logic and the ability to open a port more + than once. + + (07/23/2000) gkh + Added pool of write urbs to speed up transfers to the visor. + + (07/19/2000) gkh + Added module_init and module_exit functions to handle the fact that this + driver is a loadable module now. + + (07/03/2000) gkh + Added visor_set_ioctl and visor_set_termios functions (they don't do much + of anything, but are good for debugging.) + + (06/25/2000) gkh + Fixed bug in visor_unthrottle that should help with the disconnect in PPP + bug that people have been reporting. + + (06/23/2000) gkh + Cleaned up debugging statements in a quest to find UHCI timeout bug. + + (04/27/2000) Ryan VanderBijl + Fixed memory leak in visor_close + + (03/26/2000) gkh + Split driver up into device specific pieces. + +----------------------------------------------------------------------- +pl2303.c Change Log comments: + + 2002_Mar_26 gkh + allowed driver to work properly if there is no tty assigned to a port + (this happens for serial console devices.) + + 2001_Oct_06 gkh + Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it. + + 2001_Sep_19 gkh + Added break support. + + 2001_Aug_30 gkh + fixed oops in write_bulk_callback. + + 2001_Aug_28 gkh + reworked buffer logic to be like other usb-serial drivers. Hopefully + removing some reported problems. + + 2001_Jun_06 gkh + finished porting to 2.4 format. + + +----------------------------------------------------------------------- +io_edgeport.c Change Log comments: + + 2003_04_03 al borchers + - fixed a bug (that shows up with dosemu) where the tty struct is + used in a callback after it has been freed + + 2.3 2002_03_08 greg kroah-hartman + - fixed bug when multiple devices were attached at the same time. + + 2.2 2001_11_14 greg kroah-hartman + - fixed bug in edge_close that kept the port from being used more + than once. + - fixed memory leak on device removal. + - fixed potential double free of memory when command urb submitting + failed. + - other small cleanups when the device is removed + + 2.1 2001_07_09 greg kroah-hartman + - added support for TIOCMBIS and TIOCMBIC. + + (04/08/2001) gb + - Identify version on module load. + + 2.0 2001_03_05 greg kroah-hartman + - reworked entire driver to fit properly in with the other usb-serial + drivers. Occasional oopses still happen, but it's a good start. + + 1.2.3 (02/23/2001) greg kroah-hartman + - changed device table to work properly for 2.4.x final format. + - fixed problem with dropping data at high data rates. + + 1.2.2 (11/27/2000) greg kroah-hartman + - cleaned up more NTisms. + - Added device table for 2.4.0-test11 + + 1.2.1 (11/08/2000) greg kroah-hartman + - Started to clean up NTisms. + - Fixed problem with dev field of urb for kernels >= 2.4.0-test9 + + 1.2 (10/17/2000) David Iacovelli + Remove all EPIC code and GPL source + Fix RELEVANT_IFLAG macro to include flow control + changes port configuration changes. + Fix redefinition of SERIAL_MAGIC + Change all timeout values to 5 seconds + Tried to fix the UHCI multiple urb submission, but failed miserably. + it seems to work fine with OHCI. + ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must + find a way to work arount this UHCI bug ) + + 1.1 (10/11/2000) David Iacovelli + Fix XON/XOFF flow control to support both IXON and IXOFF + + 0.9.27 (06/30/2000) David Iacovelli + Added transmit queue and now allocate urb for command writes. + + 0.9.26 (06/29/2000) David Iacovelli + Add support for 80251 based edgeport + + 0.9.25 (06/27/2000) David Iacovelli + Do not close the port if it has multiple opens. + + 0.9.24 (05/26/2000) David Iacovelli + Add IOCTLs to support RXTX and JAVA POS + and first cut at running BlackBox Demo + + 0.9.23 (05/24/2000) David Iacovelli + Add IOCTLs to support RXTX and JAVA POS + + 0.9.22 (05/23/2000) David Iacovelli + fixed bug in enumeration. If epconfig turns on mapping by + path after a device is already plugged in, we now update + the mapping correctly + + 0.9.21 (05/16/2000) David Iacovelli + Added BlockUntilChaseResp() to also wait for txcredits + Updated the way we allocate and handle write URBs + Add debug code to dump buffers + + 0.9.20 (05/01/2000) David Iacovelli + change driver to use usb/tts/ + + 0.9.19 (05/01/2000) David Iacovelli + Update code to compile if DEBUG is off + + 0.9.18 (04/28/2000) David Iacovelli + cleanup and test tty_register with devfs + + 0.9.17 (04/27/2000) greg kroah-hartman + changed tty_register around to be like the way it + was before, but now it works properly with devfs. + + 0.9.16 (04/26/2000) david iacovelli + Fixed bug in GetProductInfo() + + 0.9.15 (04/25/2000) david iacovelli + Updated enumeration + + 0.9.14 (04/24/2000) david iacovelli + Removed all config/status IOCTLS and + converted to using /proc/edgeport + still playing with devfs + + 0.9.13 (04/24/2000) david iacovelli + Removed configuration based on ttyUSB0 + Added support for configuration using /prod/edgeport + first attempt at using devfs (not working yet!) + Added IOCTL to GetProductInfo() + Added support for custom baud rates + Add support for random port numbers + + 0.9.12 (04/18/2000) david iacovelli + added additional configuration IOCTLs + use ttyUSB0 for configuration + + 0.9.11 (04/17/2000) greg kroah-hartman + fixed module initialization race conditions. + made all urbs dynamically allocated. + made driver devfs compatible. now it only registers the tty device + when the device is actually plugged in. + + 0.9.10 (04/13/2000) greg kroah-hartman + added proc interface framework. + + 0.9.9 (04/13/2000) david iacovelli + added enumeration code and ioctls to configure the device + + 0.9.8 (04/12/2000) david iacovelli + Change interrupt read start when device is plugged in + and stop when device is removed + process interrupt reads when all ports are closed + (keep value of rxBytesAvail consistent with the edgeport) + set the USB_BULK_QUEUE flag so that we can shove a bunch + of urbs at once down the pipe + + 0.9.7 (04/10/2000) david iacovelli + start to add enumeration code. + generate serial number for epic devices + add support for kdb + + 0.9.6 (03/30/2000) david iacovelli + add IOCTL to get string, manufacture, and boot descriptors + + 0.9.5 (03/14/2000) greg kroah-hartman + more error checking added to SerialOpen to try to fix UHCI open problem + + 0.9.4 (03/09/2000) greg kroah-hartman + added more error checking to handle oops when data is hanging + around and tty is abruptly closed. + + 0.9.3 (03/09/2000) david iacovelli + Add epic support for xon/xoff chars + play with performance + + 0.9.2 (03/08/2000) greg kroah-hartman + changed most "info" calls to "dbg" + implemented flow control properly in the termios call + + 0.9.1 (03/08/2000) david iacovelli + added EPIC support + enabled bootloader update + + 0.9 (03/08/2000) greg kroah-hartman + Release to IO networks. + Integrated changes that David made + made getting urbs for writing SMP safe + + 0.8 (03/07/2000) greg kroah-hartman + Release to IO networks. + Fixed problems that were seen in code by David. + Now both Edgeport/4 and Edgeport/2 works properly. + Changed most of the functions to use port instead of serial. + + 0.7 (02/27/2000) greg kroah-hartman + Milestone 3 release. + Release to IO Networks + ioctl for waiting on line change implemented. + ioctl for getting statistics implemented. + multiport support working. + lsr and msr registers are now handled properly. + change break now hooked up and working. + support for all known Edgeport devices. + + 0.6 (02/22/2000) greg kroah-hartman + Release to IO networks. + CHASE is implemented correctly when port is closed. + SerialOpen now blocks correctly until port is fully opened. + + 0.5 (02/20/2000) greg kroah-hartman + Release to IO networks. + Known problems: + modem status register changes are not sent on to the user + CHASE is not implemented when the port is closed. + + 0.4 (02/16/2000) greg kroah-hartman + Second cut at the CeBit demo. + Doesn't leak memory on every write to the port + Still small leaks on startup. + Added support for Edgeport/2 and Edgeport/8 + + 0.3 (02/15/2000) greg kroah-hartman + CeBit demo release. + Force the line settings to 4800, 8, 1, e for the demo. + Warning! This version leaks memory like crazy! + + 0.2 (01/30/2000) greg kroah-hartman + Milestone 1 release. + Device is found by USB subsystem, enumerated, fimware is downloaded + and the descriptors are printed to the debug log, config is set, and + green light starts to blink. Open port works, and data can be sent + and received at the default settings of the UART. Loopback connector + and debug log confirms this. + + 0.1 (01/23/2000) greg kroah-hartman + Initial release to help IO Networks try to set up their test system. + Edgeport4 is recognized, firmware is downloaded, config is set so + device blinks green light every 3 sec. Port is bound, but opening, + closing, and sending data do not work properly. + + diff --git a/drivers/usb/serial/ChangeLog.old b/drivers/usb/serial/ChangeLog.old deleted file mode 100644 index c1b279939bbf..000000000000 --- a/drivers/usb/serial/ChangeLog.old +++ /dev/null @@ -1,730 +0,0 @@ -This is the contents of some of the drivers/usb/serial/ files that had old -changelog comments. They were quite old, and out of date, and we don't keep -them anymore, so I've put them here, away from the source files, in case -people still care to see them. - -- Greg Kroah-Hartman October 20, 2005 - ------------------------------------------------------------------------ -usb-serial.h Change Log comments: - - (03/26/2002) gkh - removed the port->tty check from port_paranoia_check() due to serial - consoles not having a tty device assigned to them. - - (12/03/2001) gkh - removed active from the port structure. - added documentation to the usb_serial_device_type structure - - (10/10/2001) gkh - added vendor and product to serial structure. Needed to determine device - owner when the device is disconnected. - - (05/30/2001) gkh - added sem to port structure and removed port_lock - - (10/05/2000) gkh - Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help - fix bug with urb->dev not being set properly, now that the usb core - needs it. - - (09/11/2000) gkh - Added usb_serial_debug_data function to help get rid of #DEBUG in the - drivers. - - (08/28/2000) gkh - Added port_lock to port structure. - - (08/08/2000) gkh - Added open_count to port structure. - - (07/23/2000) gkh - Added bulk_out_endpointAddress to port structure. - - (07/19/2000) gkh, pberger, and borchers - Modifications to allow usb-serial drivers to be modules. - ------------------------------------------------------------------------ -usb-serial.c Change Log comments: - - (12/10/2002) gkh - Split the ports off into their own struct device, and added a - usb-serial bus driver. - - (11/19/2002) gkh - removed a few #ifdefs for the generic code and cleaned up the failure - logic in initialization. - - (10/02/2002) gkh - moved the console code to console.c and out of this file. - - (06/05/2002) gkh - moved location of startup() call in serial_probe() until after all - of the port information and endpoints are initialized. This makes - things easier for some drivers. - - (04/10/2002) gkh - added serial_read_proc function which creates a - /proc/tty/driver/usb-serial file. - - (03/27/2002) gkh - Got USB serial console code working properly and merged into the main - version of the tree. Thanks to Randy Dunlap for the initial version - of this code, and for pushing me to finish it up. - The USB serial console works with any usb serial driver device. - - (03/21/2002) gkh - Moved all manipulation of port->open_count into the core. Now the - individual driver's open and close functions are called only when the - first open() and last close() is called. Making the drivers a bit - smaller and simpler. - Fixed a bug if a driver didn't have the owner field set. - - (02/26/2002) gkh - Moved all locking into the main serial_* functions, instead of having - the individual drivers have to grab the port semaphore. This should - reduce races. - Reworked the MOD_INC logic a bit to always increment and decrement, even - if the generic driver is being used. - - (10/10/2001) gkh - usb_serial_disconnect() now sets the serial->dev pointer is to NULL to - help prevent child drivers from accessing the device since it is now - gone. - - (09/13/2001) gkh - Moved generic driver initialize after we have registered with the USB - core. Thanks to Randy Dunlap for pointing this problem out. - - (07/03/2001) gkh - Fixed module paramater size. Thanks to John Brockmeyer for the pointer. - Fixed vendor and product getting defined through the MODULE_PARM macro - if the Generic driver wasn't compiled in. - Fixed problem with generic_shutdown() not being called for drivers that - don't have a shutdown() function. - - (06/06/2001) gkh - added evil hack that is needed for the prolific pl2303 device due to the - crazy way its endpoints are set up. - - (05/30/2001) gkh - switched from using spinlock to a semaphore, which fixes lots of problems. - - (04/08/2001) gb - Identify version on module load. - - 2001_02_05 gkh - Fixed buffer overflows bug with the generic serial driver. Thanks to - Todd Squires for fixing this. - - (01/10/2001) gkh - Fixed bug where the generic serial adaptor grabbed _any_ device that was - offered to it. - - (12/12/2000) gkh - Removed MOD_INC and MOD_DEC from poll and disconnect functions, and - moved them to the serial_open and serial_close functions. - Also fixed bug with there not being a MOD_DEC for the generic driver - (thanks to Gary Brubaker for finding this.) - - (11/29/2000) gkh - Small NULL pointer initialization cleanup which saves a bit of disk image - - (11/01/2000) Adam J. Richter - instead of using idVendor/idProduct pairs, usb serial drivers - now identify their hardware interest with usb_device_id tables, - which they usually have anyhow for use with MODULE_DEVICE_TABLE. - - (10/05/2000) gkh - Fixed bug with urb->dev not being set properly, now that the usb - core needs it. - - (09/11/2000) gkh - Removed DEBUG #ifdefs with call to usb_serial_debug_data - - (08/28/2000) gkh - Added port_lock to port structure. - Added locks for SMP safeness to generic driver - Fixed the ability to open a generic device's port more than once. - - (07/23/2000) gkh - Added bulk_out_endpointAddress to port structure. - - (07/19/2000) gkh, pberger, and borchers - Modifications to allow usb-serial drivers to be modules. - - (07/03/2000) gkh - Added more debugging to serial_ioctl call - - (06/25/2000) gkh - Changed generic_write_bulk_callback to not call wake_up_interruptible - directly, but to have port_softint do it at a safer time. - - (06/23/2000) gkh - Cleaned up debugging statements in a quest to find UHCI timeout bug. - - (05/22/2000) gkh - Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be - removed from the individual device source files. - - (05/03/2000) gkh - Added the Digi Acceleport driver from Al Borchers and Peter Berger. - - (05/02/2000) gkh - Changed devfs and tty register code to work properly now. This was based on - the ACM driver changes by Vojtech Pavlik. - - (04/27/2000) Ryan VanderBijl - Put calls to *_paranoia_checks into one function. - - (04/23/2000) gkh - Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports. - Moved when the startup code printed out the devices that are supported. - - (04/19/2000) gkh - Added driver for ZyXEL omni.net lcd plus ISDN TA - Made startup info message specify which drivers were compiled in. - - (04/03/2000) gkh - Changed the probe process to remove the module unload races. - Changed where the tty layer gets initialized to have devfs work nicer. - Added initial devfs support. - - (03/26/2000) gkh - Split driver up into device specific pieces. - - (03/19/2000) gkh - Fixed oops that could happen when device was removed while a program - was talking to the device. - Removed the static urbs and now all urbs are created and destroyed - dynamically. - Reworked the internal interface. Now everything is based on the - usb_serial_port structure instead of the larger usb_serial structure. - This fixes the bug that a multiport device could not have more than - one port open at one time. - - (03/17/2000) gkh - Added config option for debugging messages. - Added patch for keyspan pda from Brian Warner. - - (03/06/2000) gkh - Added the keyspan pda code from Brian Warner - Moved a bunch of the port specific stuff into its own structure. This - is in anticipation of the true multiport devices (there's a bug if you - try to access more than one port of any multiport device right now) - - (02/21/2000) gkh - Made it so that any serial devices only have to specify which functions - they want to overload from the generic function calls (great, - inheritance in C, in a driver, just what I wanted...) - Added support for set_termios and ioctl function calls. No drivers take - advantage of this yet. - Removed the #ifdef MODULE, now there is no module specific code. - Cleaned up a few comments in usb-serial.h that were wrong (thanks again - to Miles Lott). - Small fix to get_free_serial. - - (02/14/2000) gkh - Removed the Belkin and Peracom functionality from the driver due to - the lack of support from the vendor, and me not wanting people to - accidenatly buy the device, expecting it to work with Linux. - Added read_bulk_callback and write_bulk_callback to the type structure - for the needs of the FTDI and WhiteHEAT driver. - Changed all reverences to FTDI to FTDI_SIO at the request of Bill - Ryder. - Changed the output urb size back to the max endpoint size to make - the ftdi_sio driver have it easier, and due to the fact that it didn't - really increase the speed any. - - (02/11/2000) gkh - Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a - patch from Miles Lott (milos@insync.net). - Fixed bug with not restoring the minor range that a device grabs, if - the startup function fails (thanks Miles for finding this). - - (02/05/2000) gkh - Added initial framework for the Keyspan PDA serial converter so that - Brian Warner has a place to put his code. - Made the ezusb specific functions generic enough that different - devices can use them (whiteheat and keyspan_pda both need them). - Split out a whole bunch of structure and other stuff to a separate - usb-serial.h file. - Made the Visor connection messages a little more understandable, now - that Miles Lott (milos@insync.net) has gotten the Generic channel to - work. Also made them always show up in the log file. - - (01/25/2000) gkh - Added initial framework for FTDI serial converter so that Bill Ryder - has a place to put his code. - Added the vendor specific info from Handspring. Now we can print out - informational debug messages as well as understand what is happening. - - (01/23/2000) gkh - Fixed problem of crash when trying to open a port that didn't have a - device assigned to it. Made the minor node finding a little smarter, - now it looks to find a continuous space for the new device. - - (01/21/2000) gkh - Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net) - Fixed get_serial_by_minor which was all messed up for multi port - devices. Fixed multi port problem for generic devices. Now the number - of ports is determined by the number of bulk out endpoints for the - generic device. - - (01/19/2000) gkh - Removed lots of cruft that was around from the old (pre urb) driver - interface. - Made the serial_table dynamic. This should save lots of memory when - the number of minor nodes goes up to 256. - Added initial support for devices that have more than one port. - Added more debugging comments for the Visor, and added a needed - set_configuration call. - - (01/17/2000) gkh - Fixed the WhiteHEAT firmware (my processing tool had a bug) - and added new debug loader firmware for it. - Removed the put_char function as it isn't really needed. - Added visor startup commands as found by the Win98 dump. - - (01/13/2000) gkh - Fixed the vendor id for the generic driver to the one I meant it to be. - - (01/12/2000) gkh - Forget the version numbering...that's pretty useless... - Made the driver able to be compiled so that the user can select which - converter they want to use. This allows people who only want the Visor - support to not pay the memory size price of the WhiteHEAT. - Fixed bug where the generic driver (idVendor=0000 and idProduct=0000) - grabbed the root hub. Not good. - - version 0.4.0 (01/10/2000) gkh - Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT - device. Added startup function to allow firmware to be downloaded to - a device if it needs to be. - Added firmware download logic to the WhiteHEAT device. - Started to add #defines to split up the different drivers for potential - configuration option. - - version 0.3.1 (12/30/99) gkh - Fixed problems with urb for bulk out. - Added initial support for multiple sets of endpoints. This enables - the Handspring Visor to be attached successfully. Only the first - bulk in / bulk out endpoint pair is being used right now. - - version 0.3.0 (12/27/99) gkh - Added initial support for the Handspring Visor based on a patch from - Miles Lott (milos@sneety.insync.net) - Cleaned up the code a bunch and converted over to using urbs only. - - version 0.2.3 (12/21/99) gkh - Added initial support for the Connect Tech WhiteHEAT converter. - Incremented the number of ports in expectation of getting the - WhiteHEAT to work properly (4 ports per connection). - Added notification on insertion and removal of what port the - device is/was connected to (and what kind of device it was). - - version 0.2.2 (12/16/99) gkh - Changed major number to the new allocated number. We're legal now! - - version 0.2.1 (12/14/99) gkh - Fixed bug that happens when device node is opened when there isn't a - device attached to it. Thanks to marek@webdesign.no for noticing this. - - version 0.2.0 (11/10/99) gkh - Split up internals to make it easier to add different types of serial - converters to the code. - Added a "generic" driver that gets it's vendor and product id - from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net) - for the idea and sample code (from the usb scanner driver.) - Cleared up any licensing questions by releasing it under the GNU GPL. - - version 0.1.2 (10/25/99) gkh - Fixed bug in detecting device. - - version 0.1.1 (10/05/99) gkh - Changed the major number to not conflict with anything else. - - version 0.1 (09/28/99) gkh - Can recognize the two different devices and start up a read from - device when asked to. Writes also work. No control signals yet, this - all is vendor specific data (i.e. no spec), also no control for - different baud rates or other bit settings. - Currently we are using the same devid as the acm driver. This needs - to change. - ------------------------------------------------------------------------ -visor.c Change Log comments: - - (06/03/2003) Judd Montgomery - Added support for module parameter options for untested/unknown - devices. - - (03/09/2003) gkh - Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl - for the information. - - (03/05/2003) gkh - Think Treo support is now working. - - (04/03/2002) gkh - Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI - for the information. - - (03/27/2002) gkh - Removed assumptions that port->tty was always valid (is not true - for usb serial console devices.) - - (03/23/2002) gkh - Added support for the Palm i705 device, thanks to Thomas Riemer - for the information. - - (03/21/2002) gkh - Added support for the Palm m130 device, thanks to Udo Eisenbarth - for the information. - - (02/27/2002) gkh - Reworked the urb handling logic. We have no more pool, but dynamically - allocate the urb and the transfer buffer on the fly. In testing this - does not incure any measurable overhead. This also relies on the fact - that we have proper reference counting logic for urbs. - - (02/21/2002) SilaS - Added initial support for the Palm m515 devices. - - (02/14/2002) gkh - Added support for the Clie S-360 device. - - (12/18/2001) gkh - Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand - for the patch. - - (11/11/2001) gkh - Added support for the m125 devices, and added check to prevent oopses - for Clié devices that lie about the number of ports they have. - - (08/30/2001) gkh - Added support for the Clie devices, both the 3.5 and 4.0 os versions. - Many thanks to Daniel Burke, and Bryan Payne for helping with this. - - (08/23/2001) gkh - fixed a few potential bugs pointed out by Oliver Neukum. - - (05/30/2001) gkh - switched from using spinlock to a semaphore, which fixes lots of problems. - - (05/28/2000) gkh - Added initial support for the Palm m500 and Palm m505 devices. - - (04/08/2001) gb - Identify version on module load. - - (01/21/2000) gkh - Added write_room and chars_in_buffer, as they were previously using the - generic driver versions which is all wrong now that we are using an urb - pool. Thanks to Wolfgang Grandegger for pointing this out to me. - Removed count assignment in the write function, which was not needed anymore - either. Thanks to Al Borchers for pointing this out. - - (12/12/2000) gkh - Moved MOD_DEC to end of visor_close to be nicer, as the final write - message can sleep. - - (11/12/2000) gkh - Fixed bug with data being dropped on the floor by forcing tty->low_latency - to be on. Hopefully this fixes the OHCI issue! - - (11/01/2000) Adam J. Richter - usb_device_id table support - - (10/05/2000) gkh - Fixed bug with urb->dev not being set properly, now that the usb - core needs it. - - (09/11/2000) gkh - Got rid of always calling kmalloc for every urb we wrote out to the - device. - Added visor_read_callback so we can keep track of bytes in and out for - those people who like to know the speed of their device. - Removed DEBUG #ifdefs with call to usb_serial_debug_data - - (09/06/2000) gkh - Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_ - the host controller drivers set urb->dev = NULL when the urb is finished. - - (08/28/2000) gkh - Added locks for SMP safeness. - - (08/08/2000) gkh - Fixed endian problem in visor_startup. - Fixed MOD_INC and MOD_DEC logic and the ability to open a port more - than once. - - (07/23/2000) gkh - Added pool of write urbs to speed up transfers to the visor. - - (07/19/2000) gkh - Added module_init and module_exit functions to handle the fact that this - driver is a loadable module now. - - (07/03/2000) gkh - Added visor_set_ioctl and visor_set_termios functions (they don't do much - of anything, but are good for debugging.) - - (06/25/2000) gkh - Fixed bug in visor_unthrottle that should help with the disconnect in PPP - bug that people have been reporting. - - (06/23/2000) gkh - Cleaned up debugging statements in a quest to find UHCI timeout bug. - - (04/27/2000) Ryan VanderBijl - Fixed memory leak in visor_close - - (03/26/2000) gkh - Split driver up into device specific pieces. - ------------------------------------------------------------------------ -pl2303.c Change Log comments: - - 2002_Mar_26 gkh - allowed driver to work properly if there is no tty assigned to a port - (this happens for serial console devices.) - - 2001_Oct_06 gkh - Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it. - - 2001_Sep_19 gkh - Added break support. - - 2001_Aug_30 gkh - fixed oops in write_bulk_callback. - - 2001_Aug_28 gkh - reworked buffer logic to be like other usb-serial drivers. Hopefully - removing some reported problems. - - 2001_Jun_06 gkh - finished porting to 2.4 format. - - ------------------------------------------------------------------------ -io_edgeport.c Change Log comments: - - 2003_04_03 al borchers - - fixed a bug (that shows up with dosemu) where the tty struct is - used in a callback after it has been freed - - 2.3 2002_03_08 greg kroah-hartman - - fixed bug when multiple devices were attached at the same time. - - 2.2 2001_11_14 greg kroah-hartman - - fixed bug in edge_close that kept the port from being used more - than once. - - fixed memory leak on device removal. - - fixed potential double free of memory when command urb submitting - failed. - - other small cleanups when the device is removed - - 2.1 2001_07_09 greg kroah-hartman - - added support for TIOCMBIS and TIOCMBIC. - - (04/08/2001) gb - - Identify version on module load. - - 2.0 2001_03_05 greg kroah-hartman - - reworked entire driver to fit properly in with the other usb-serial - drivers. Occasional oopses still happen, but it's a good start. - - 1.2.3 (02/23/2001) greg kroah-hartman - - changed device table to work properly for 2.4.x final format. - - fixed problem with dropping data at high data rates. - - 1.2.2 (11/27/2000) greg kroah-hartman - - cleaned up more NTisms. - - Added device table for 2.4.0-test11 - - 1.2.1 (11/08/2000) greg kroah-hartman - - Started to clean up NTisms. - - Fixed problem with dev field of urb for kernels >= 2.4.0-test9 - - 1.2 (10/17/2000) David Iacovelli - Remove all EPIC code and GPL source - Fix RELEVANT_IFLAG macro to include flow control - changes port configuration changes. - Fix redefinition of SERIAL_MAGIC - Change all timeout values to 5 seconds - Tried to fix the UHCI multiple urb submission, but failed miserably. - it seems to work fine with OHCI. - ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must - find a way to work arount this UHCI bug ) - - 1.1 (10/11/2000) David Iacovelli - Fix XON/XOFF flow control to support both IXON and IXOFF - - 0.9.27 (06/30/2000) David Iacovelli - Added transmit queue and now allocate urb for command writes. - - 0.9.26 (06/29/2000) David Iacovelli - Add support for 80251 based edgeport - - 0.9.25 (06/27/2000) David Iacovelli - Do not close the port if it has multiple opens. - - 0.9.24 (05/26/2000) David Iacovelli - Add IOCTLs to support RXTX and JAVA POS - and first cut at running BlackBox Demo - - 0.9.23 (05/24/2000) David Iacovelli - Add IOCTLs to support RXTX and JAVA POS - - 0.9.22 (05/23/2000) David Iacovelli - fixed bug in enumeration. If epconfig turns on mapping by - path after a device is already plugged in, we now update - the mapping correctly - - 0.9.21 (05/16/2000) David Iacovelli - Added BlockUntilChaseResp() to also wait for txcredits - Updated the way we allocate and handle write URBs - Add debug code to dump buffers - - 0.9.20 (05/01/2000) David Iacovelli - change driver to use usb/tts/ - - 0.9.19 (05/01/2000) David Iacovelli - Update code to compile if DEBUG is off - - 0.9.18 (04/28/2000) David Iacovelli - cleanup and test tty_register with devfs - - 0.9.17 (04/27/2000) greg kroah-hartman - changed tty_register around to be like the way it - was before, but now it works properly with devfs. - - 0.9.16 (04/26/2000) david iacovelli - Fixed bug in GetProductInfo() - - 0.9.15 (04/25/2000) david iacovelli - Updated enumeration - - 0.9.14 (04/24/2000) david iacovelli - Removed all config/status IOCTLS and - converted to using /proc/edgeport - still playing with devfs - - 0.9.13 (04/24/2000) david iacovelli - Removed configuration based on ttyUSB0 - Added support for configuration using /prod/edgeport - first attempt at using devfs (not working yet!) - Added IOCTL to GetProductInfo() - Added support for custom baud rates - Add support for random port numbers - - 0.9.12 (04/18/2000) david iacovelli - added additional configuration IOCTLs - use ttyUSB0 for configuration - - 0.9.11 (04/17/2000) greg kroah-hartman - fixed module initialization race conditions. - made all urbs dynamically allocated. - made driver devfs compatible. now it only registers the tty device - when the device is actually plugged in. - - 0.9.10 (04/13/2000) greg kroah-hartman - added proc interface framework. - - 0.9.9 (04/13/2000) david iacovelli - added enumeration code and ioctls to configure the device - - 0.9.8 (04/12/2000) david iacovelli - Change interrupt read start when device is plugged in - and stop when device is removed - process interrupt reads when all ports are closed - (keep value of rxBytesAvail consistent with the edgeport) - set the USB_BULK_QUEUE flag so that we can shove a bunch - of urbs at once down the pipe - - 0.9.7 (04/10/2000) david iacovelli - start to add enumeration code. - generate serial number for epic devices - add support for kdb - - 0.9.6 (03/30/2000) david iacovelli - add IOCTL to get string, manufacture, and boot descriptors - - 0.9.5 (03/14/2000) greg kroah-hartman - more error checking added to SerialOpen to try to fix UHCI open problem - - 0.9.4 (03/09/2000) greg kroah-hartman - added more error checking to handle oops when data is hanging - around and tty is abruptly closed. - - 0.9.3 (03/09/2000) david iacovelli - Add epic support for xon/xoff chars - play with performance - - 0.9.2 (03/08/2000) greg kroah-hartman - changed most "info" calls to "dbg" - implemented flow control properly in the termios call - - 0.9.1 (03/08/2000) david iacovelli - added EPIC support - enabled bootloader update - - 0.9 (03/08/2000) greg kroah-hartman - Release to IO networks. - Integrated changes that David made - made getting urbs for writing SMP safe - - 0.8 (03/07/2000) greg kroah-hartman - Release to IO networks. - Fixed problems that were seen in code by David. - Now both Edgeport/4 and Edgeport/2 works properly. - Changed most of the functions to use port instead of serial. - - 0.7 (02/27/2000) greg kroah-hartman - Milestone 3 release. - Release to IO Networks - ioctl for waiting on line change implemented. - ioctl for getting statistics implemented. - multiport support working. - lsr and msr registers are now handled properly. - change break now hooked up and working. - support for all known Edgeport devices. - - 0.6 (02/22/2000) greg kroah-hartman - Release to IO networks. - CHASE is implemented correctly when port is closed. - SerialOpen now blocks correctly until port is fully opened. - - 0.5 (02/20/2000) greg kroah-hartman - Release to IO networks. - Known problems: - modem status register changes are not sent on to the user - CHASE is not implemented when the port is closed. - - 0.4 (02/16/2000) greg kroah-hartman - Second cut at the CeBit demo. - Doesn't leak memory on every write to the port - Still small leaks on startup. - Added support for Edgeport/2 and Edgeport/8 - - 0.3 (02/15/2000) greg kroah-hartman - CeBit demo release. - Force the line settings to 4800, 8, 1, e for the demo. - Warning! This version leaks memory like crazy! - - 0.2 (01/30/2000) greg kroah-hartman - Milestone 1 release. - Device is found by USB subsystem, enumerated, fimware is downloaded - and the descriptors are printed to the debug log, config is set, and - green light starts to blink. Open port works, and data can be sent - and received at the default settings of the UART. Loopback connector - and debug log confirms this. - - 0.1 (01/23/2000) greg kroah-hartman - Initial release to help IO Networks try to set up their test system. - Edgeport4 is recognized, firmware is downloaded, config is set so - device blinks green light every 3 sec. Port is bound, but opening, - closing, and sending data do not work properly. - - -- cgit v1.2.3