From 8b5026bc16938920e4780b9094c3bf20e1e0939d Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Mon, 23 Dec 2019 15:03:21 +0100 Subject: s390/qeth: fix qdio teardown after early init error qeth_l?_set_online() goes through a number of initialization steps, and on any error uses qeth_l?_stop_card() to tear down the residual state. The first initialization step is qeth_core_hardsetup_card(). When this fails after having established a QDIO context on the device (ie. somewhere after qeth_mpc_initialize()), qeth_l?_stop_card() doesn't shut down this QDIO context again (since the card state hasn't progressed from DOWN at this stage). Even worse, we then call qdio_free() as final teardown step to free the QDIO data structures - while some of them are still hooked into wider QDIO infrastructure such as the IRQ list. This is inevitably followed by use-after-frees and other nastyness. Fix this by unconditionally calling qeth_qdio_clear_card() to shut down the QDIO context, and also to halt/clear any pending activity on the various IO channels. Remove the naive attempt at handling the teardown in qeth_mpc_initialize(), it clearly doesn't suffice and we're handling it properly now in the wider teardown code. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 20 ++++++++------------ drivers/s390/net/qeth_l2_main.c | 2 +- drivers/s390/net/qeth_l3_main.c | 2 +- 3 files changed, 10 insertions(+), 14 deletions(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index bc4158888af9..324cf22f9111 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -2482,50 +2482,46 @@ static int qeth_mpc_initialize(struct qeth_card *card) rc = qeth_cm_enable(card); if (rc) { QETH_CARD_TEXT_(card, 2, "2err%d", rc); - goto out_qdio; + return rc; } rc = qeth_cm_setup(card); if (rc) { QETH_CARD_TEXT_(card, 2, "3err%d", rc); - goto out_qdio; + return rc; } rc = qeth_ulp_enable(card); if (rc) { QETH_CARD_TEXT_(card, 2, "4err%d", rc); - goto out_qdio; + return rc; } rc = qeth_ulp_setup(card); if (rc) { QETH_CARD_TEXT_(card, 2, "5err%d", rc); - goto out_qdio; + return rc; } rc = qeth_alloc_qdio_queues(card); if (rc) { QETH_CARD_TEXT_(card, 2, "5err%d", rc); - goto out_qdio; + return rc; } rc = qeth_qdio_establish(card); if (rc) { QETH_CARD_TEXT_(card, 2, "6err%d", rc); qeth_free_qdio_queues(card); - goto out_qdio; + return rc; } rc = qeth_qdio_activate(card); if (rc) { QETH_CARD_TEXT_(card, 2, "7err%d", rc); - goto out_qdio; + return rc; } rc = qeth_dm_act(card); if (rc) { QETH_CARD_TEXT_(card, 2, "8err%d", rc); - goto out_qdio; + return rc; } return 0; -out_qdio: - qeth_qdio_clear_card(card, !IS_IQD(card)); - qdio_free(CARD_DDEV(card)); - return rc; } void qeth_print_status_message(struct qeth_card *card) diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 8c95e6019bac..15e2fd65d434 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -287,12 +287,12 @@ static void qeth_l2_stop_card(struct qeth_card *card) card->state = CARD_STATE_HARDSETUP; } if (card->state == CARD_STATE_HARDSETUP) { - qeth_qdio_clear_card(card, 0); qeth_drain_output_queues(card); qeth_clear_working_pool_list(card); card->state = CARD_STATE_DOWN; } + qeth_qdio_clear_card(card, 0); flush_workqueue(card->event_wq); card->info.mac_bits &= ~QETH_LAYER2_MAC_REGISTERED; card->info.promisc_mode = 0; diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 04e301de376f..5508ab89b518 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -1307,12 +1307,12 @@ static void qeth_l3_stop_card(struct qeth_card *card) card->state = CARD_STATE_HARDSETUP; } if (card->state == CARD_STATE_HARDSETUP) { - qeth_qdio_clear_card(card, 0); qeth_drain_output_queues(card); qeth_clear_working_pool_list(card); card->state = CARD_STATE_DOWN; } + qeth_qdio_clear_card(card, 0); flush_workqueue(card->event_wq); card->info.promisc_mode = 0; } -- cgit v1.2.3 From 5b6c7b55cfe26224b0f41b1c226d3534c542787f Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Mon, 23 Dec 2019 15:03:22 +0100 Subject: s390/qeth: lock the card while changing its hsuid qeth_l3_dev_hsuid_store() initially checks the card state, but doesn't take the conf_mutex to ensure that the card stays in this state while being reconfigured. Rework the code to take this lock, and drop a redundant state check in a helper function. Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 5 ----- drivers/s390/net/qeth_l3_sys.c | 40 +++++++++++++++++++++++++++------------ 2 files changed, 28 insertions(+), 17 deletions(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 324cf22f9111..c64ef55f0dff 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -3425,11 +3425,6 @@ int qeth_configure_cq(struct qeth_card *card, enum qeth_cq cq) goto out; } - if (card->state != CARD_STATE_DOWN) { - rc = -1; - goto out; - } - qeth_free_qdio_queues(card); card->options.cq = cq; rc = 0; diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c index f9067ed6c7d3..e8c848f72c6d 100644 --- a/drivers/s390/net/qeth_l3_sys.c +++ b/drivers/s390/net/qeth_l3_sys.c @@ -242,21 +242,33 @@ static ssize_t qeth_l3_dev_hsuid_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct qeth_card *card = dev_get_drvdata(dev); + int rc = 0; char *tmp; - int rc; if (!IS_IQD(card)) return -EPERM; - if (card->state != CARD_STATE_DOWN) - return -EPERM; - if (card->options.sniffer) - return -EPERM; - if (card->options.cq == QETH_CQ_NOTAVAILABLE) - return -EPERM; + + mutex_lock(&card->conf_mutex); + if (card->state != CARD_STATE_DOWN) { + rc = -EPERM; + goto out; + } + + if (card->options.sniffer) { + rc = -EPERM; + goto out; + } + + if (card->options.cq == QETH_CQ_NOTAVAILABLE) { + rc = -EPERM; + goto out; + } tmp = strsep((char **)&buf, "\n"); - if (strlen(tmp) > 8) - return -EINVAL; + if (strlen(tmp) > 8) { + rc = -EINVAL; + goto out; + } if (card->options.hsuid[0]) /* delete old ip address */ @@ -267,11 +279,13 @@ static ssize_t qeth_l3_dev_hsuid_store(struct device *dev, card->options.hsuid[0] = '\0'; memcpy(card->dev->perm_addr, card->options.hsuid, 9); qeth_configure_cq(card, QETH_CQ_DISABLED); - return count; + goto out; } - if (qeth_configure_cq(card, QETH_CQ_ENABLED)) - return -EPERM; + if (qeth_configure_cq(card, QETH_CQ_ENABLED)) { + rc = -EPERM; + goto out; + } snprintf(card->options.hsuid, sizeof(card->options.hsuid), "%-8s", tmp); @@ -280,6 +294,8 @@ static ssize_t qeth_l3_dev_hsuid_store(struct device *dev, rc = qeth_l3_modify_hsuid(card, true); +out: + mutex_unlock(&card->conf_mutex); return rc ? rc : count; } -- cgit v1.2.3 From 68c57bfd52836e31bff33e5e1fc64029749d2c35 Mon Sep 17 00:00:00 2001 From: Alexandra Winter Date: Mon, 23 Dec 2019 15:03:23 +0100 Subject: s390/qeth: fix false reporting of VNIC CHAR config failure Symptom: Error message "Configuring the VNIC characteristics failed" in dmesg whenever an OSA interface on z15 is set online. The VNIC characteristics get re-programmed when setting a L2 device online. This follows the selected 'wanted' characteristics - with the exception that the INVISIBLE characteristic unconditionally gets switched off. For devices that don't support INVISIBLE (ie. OSA), the resulting IO failure raises a noisy error message ("Configuring the VNIC characteristics failed"). For IQD, INVISIBLE is off by default anyways. So don't unnecessarily special-case the INVISIBLE characteristic, and thereby suppress the misleading error message on OSA devices. Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter Reviewed-by: Julian Wiedmann Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l2_main.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 15e2fd65d434..fc5d8ed3a737 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -2041,7 +2041,6 @@ static void qeth_l2_vnicc_init(struct qeth_card *card) error |= qeth_l2_vnicc_recover_timeout(card, QETH_VNICC_LEARNING, timeout); chars_tmp = card->options.vnicc.wanted_chars ^ QETH_VNICC_DEFAULT; - chars_tmp |= QETH_VNICC_BRIDGE_INVISIBLE; chars_len = sizeof(card->options.vnicc.wanted_chars) * BITS_PER_BYTE; for_each_set_bit(i, &chars_tmp, chars_len) { vnicc = BIT(i); -- cgit v1.2.3 From e8a66d800471e2df7f0b484e2e46898b21d1fa82 Mon Sep 17 00:00:00 2001 From: Alexandra Winter Date: Mon, 23 Dec 2019 15:03:24 +0100 Subject: s390/qeth: Fix vnicc_is_in_use if rx_bcast not set Symptom: After vnicc/rx_bcast has been manually set to 0, bridge_* sysfs parameters can still be set or written. Only occurs on HiperSockets, as OSA doesn't support changing rx_bcast. Vnic characteristics and bridgeport settings are mutually exclusive. rx_bcast defaults to 1, so manually setting it to 0 should disable bridge_* parameters. Instead it makes sense here to check the supported mask. If the card does not support vnicc at all, bridge commands are always allowed. Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l2_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index fc5d8ed3a737..8024a2112a87 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -1952,8 +1952,7 @@ int qeth_l2_vnicc_get_timeout(struct qeth_card *card, u32 *timeout) /* check if VNICC is currently enabled */ bool qeth_l2_vnicc_is_in_use(struct qeth_card *card) { - /* if everything is turned off, VNICC is not active */ - if (!card->options.vnicc.cur_chars) + if (!card->options.vnicc.sup_chars) return false; /* default values are only OK if rx_bcast was not enabled by user * or the card is offline. -- cgit v1.2.3 From d1b9ae1864fc3c000e0eb4af8482d78c63e0915a Mon Sep 17 00:00:00 2001 From: Alexandra Winter Date: Mon, 23 Dec 2019 15:03:25 +0100 Subject: s390/qeth: vnicc Fix init to default During vnicc_init wanted_char should be compared to cur_char and not to QETH_VNICC_DEFAULT. Without this patch there is no way to enforce the default values as desired values. Note, that it is expected, that a card comes online with default values. This patch was tested with private card firmware. Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l2_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 8024a2112a87..47d37e75dda6 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -2039,7 +2039,9 @@ static void qeth_l2_vnicc_init(struct qeth_card *card) /* enforce assumed default values and recover settings, if changed */ error |= qeth_l2_vnicc_recover_timeout(card, QETH_VNICC_LEARNING, timeout); - chars_tmp = card->options.vnicc.wanted_chars ^ QETH_VNICC_DEFAULT; + /* Change chars, if necessary */ + chars_tmp = card->options.vnicc.wanted_chars ^ + card->options.vnicc.cur_chars; chars_len = sizeof(card->options.vnicc.wanted_chars) * BITS_PER_BYTE; for_each_set_bit(i, &chars_tmp, chars_len) { vnicc = BIT(i); -- cgit v1.2.3 From 0b698c838e84149b690c7e979f78cccb6f8aa4b9 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Mon, 23 Dec 2019 15:03:26 +0100 Subject: s390/qeth: fix initialization on old HW I stumbled over an old OSA model that claims to support DIAG_ASSIST, but then rejects the cmd to query its DIAG capabilities. In the old code this was ok, as the returned raw error code was > 0. Now that we translate the raw codes to errnos, the "rc < 0" causes us to fail the initialization of the device. The fix is trivial: don't bail out when the DIAG query fails. Such an error is not critical, we can still use the device (with a slightly reduced set of features). Fixes: 742d4d40831d ("s390/qeth: convert remaining legacy cmd callbacks") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index c64ef55f0dff..29facb913671 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -5026,10 +5026,8 @@ retriable: } if (qeth_adp_supported(card, IPA_SETADP_SET_DIAG_ASSIST)) { rc = qeth_query_setdiagass(card); - if (rc < 0) { + if (rc) QETH_CARD_TEXT_(card, 2, "8err%d", rc); - goto out; - } } if (!qeth_is_diagass_supported(card, QETH_DIAGS_CMD_TRAP) || -- cgit v1.2.3