From fb59ee37cfe20d10d19568899d1458a58361246c Mon Sep 17 00:00:00 2001 From: Faiz Abbas Date: Wed, 19 Jun 2019 15:54:54 +0530 Subject: ARM: dts: am57xx: Disable voltage switching for SD card If UHS speed modes are enabled, a compatible SD card switches down to 1.8V during enumeration. If after this a software reboot/crash takes place and on-chip ROM tries to enumerate the SD card, the difference in IO voltages (host @ 3.3V and card @ 1.8V) may end up damaging the card. The fix for this is to have support for power cycling the card in hardware (with a PORz/soft-reset line causing a power cycle of the card). Because the beaglebone X15 (rev A,B and C), am57xx-idks and am57xx-evms don't have this capability, disable voltage switching for these boards. The major effect of this is that the maximum supported speed mode is now high speed(50 MHz) down from SDR104(200 MHz). commit 88a748419b84 ("ARM: dts: am57xx-idk: Remove support for voltage switching for SD card") did this only for idk boards. Do it for all affected boards. Signed-off-by: Faiz Abbas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am571x-idk.dts | 7 +------ arch/arm/boot/dts/am572x-idk.dts | 7 +------ arch/arm/boot/dts/am574x-idk.dts | 7 +------ arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 1 + arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts | 7 +------ arch/arm/boot/dts/am57xx-beagle-x15-revc.dts | 7 +------ 6 files changed, 6 insertions(+), 30 deletions(-) diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 66116ad3f9f4..0a043908215c 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -178,14 +178,9 @@ }; &mmc1 { - pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-names = "default", "hs"; pinctrl-0 = <&mmc1_pins_default_no_clk_pu>; pinctrl-1 = <&mmc1_pins_hs>; - pinctrl-2 = <&mmc1_pins_sdr12>; - pinctrl-3 = <&mmc1_pins_sdr25>; - pinctrl-4 = <&mmc1_pins_sdr50>; - pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>; - pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; }; &mmc2 { diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index 4f835222c266..8663a9416af6 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -19,14 +19,9 @@ }; &mmc1 { - pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-names = "default", "hs"; pinctrl-0 = <&mmc1_pins_default_no_clk_pu>; pinctrl-1 = <&mmc1_pins_hs>; - pinctrl-2 = <&mmc1_pins_sdr12>; - pinctrl-3 = <&mmc1_pins_sdr25>; - pinctrl-4 = <&mmc1_pins_sdr50>; - pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>; - pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; }; &mmc2 { diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index dc5141c35610..7935d70874ce 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -24,14 +24,9 @@ }; &mmc1 { - pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-names = "default", "hs"; pinctrl-0 = <&mmc1_pins_default_no_clk_pu>; pinctrl-1 = <&mmc1_pins_hs>; - pinctrl-2 = <&mmc1_pins_default>; - pinctrl-3 = <&mmc1_pins_hs>; - pinctrl-4 = <&mmc1_pins_sdr50>; - pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_conf>; - pinctrl-6 = <&mmc1_pins_ddr50 &mmc1_iodelay_sdr104_conf>; }; &mmc2 { diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 2341a56ebab9..0cdfd2853ba8 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -433,6 +433,7 @@ bus-width = <4>; cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ + no-1-8-v; }; &mmc2 { diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts index 5a77b334923d..34c69965821b 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts @@ -19,14 +19,9 @@ }; &mmc1 { - pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-names = "default", "hs"; pinctrl-0 = <&mmc1_pins_default>; pinctrl-1 = <&mmc1_pins_hs>; - pinctrl-2 = <&mmc1_pins_sdr12>; - pinctrl-3 = <&mmc1_pins_sdr25>; - pinctrl-4 = <&mmc1_pins_sdr50>; - pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>; - pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>; vmmc-supply = <&vdd_3v3>; vqmmc-supply = <&ldo1_reg>; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts index 17c41da3b55f..ccd99160bbdf 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts @@ -19,14 +19,9 @@ }; &mmc1 { - pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-names = "default", "hs"; pinctrl-0 = <&mmc1_pins_default>; pinctrl-1 = <&mmc1_pins_hs>; - pinctrl-2 = <&mmc1_pins_sdr12>; - pinctrl-3 = <&mmc1_pins_sdr25>; - pinctrl-4 = <&mmc1_pins_sdr50>; - pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>; - pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; vmmc-supply = <&vdd_3v3>; vqmmc-supply = <&ldo1_reg>; }; -- cgit v1.2.3 From e32db73c5aca895a43061cf6621076aa798530e3 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 18 Jul 2019 21:24:55 +0200 Subject: MAINTAINERS: Update my email address Use my kernel.org address instead of the bootlin one. Signed-off-by: Maxime Ripard --- .mailmap | 2 ++ MAINTAINERS | 10 +++++----- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/.mailmap b/.mailmap index 0fef932de3db..509d258a9e77 100644 --- a/.mailmap +++ b/.mailmap @@ -157,6 +157,8 @@ Matt Ranostay Matthew Ranostay Matt Ranostay Matt Redfearn +Maxime Ripard +Maxime Ripard Mayuresh Janorkar Michael Buesch Michel Dänzer diff --git a/MAINTAINERS b/MAINTAINERS index 783569e3c4b4..8743615770a9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -683,7 +683,7 @@ S: Maintained F: drivers/crypto/sunxi-ss/ ALLWINNER VPU DRIVER -M: Maxime Ripard +M: Maxime Ripard M: Paul Kocialkowski L: linux-media@vger.kernel.org S: Maintained @@ -1408,7 +1408,7 @@ S: Maintained F: drivers/clk/sunxi/ ARM/Allwinner sunXi SoC support -M: Maxime Ripard +M: Maxime Ripard M: Chen-Yu Tsai L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained @@ -3573,7 +3573,7 @@ F: Documentation/filesystems/caching/cachefiles.txt F: fs/cachefiles/ CADENCE MIPI-CSI2 BRIDGES -M: Maxime Ripard +M: Maxime Ripard L: linux-media@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/media/cdns,*.txt @@ -5291,7 +5291,7 @@ F: include/linux/vga* DRM DRIVERS AND MISC GPU PATCHES M: Maarten Lankhorst -M: Maxime Ripard +M: Maxime Ripard M: Sean Paul W: https://01.org/linuxgraphics/gfx-docs/maintainer-tools/drm-misc.html S: Maintained @@ -5304,7 +5304,7 @@ F: include/uapi/drm/drm* F: include/linux/vga* DRM DRIVERS FOR ALLWINNER A10 -M: Maxime Ripard +M: Maxime Ripard L: dri-devel@lists.freedesktop.org S: Supported F: drivers/gpu/drm/sun4i/ -- cgit v1.2.3 From afd58b162e48076e3fe66d08a69eefbd6fe71643 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 22 Jul 2019 03:44:52 -0700 Subject: ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss TRM says PWMSS_SYSCONFIG bit for SOFTRESET changes to zero when reset is completed. Let's configure it as otherwise we get warnings on boot when we check the data against dts provided data. Eventually the legacy platform data will be just dropped, but let's fix the warning first. Reviewed-by: Suman Anna Tested-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 4a5b4aee6615..1ec21e9ba1e9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -379,7 +379,8 @@ static struct omap_hwmod dra7xx_dcan2_hwmod = { static struct omap_hwmod_class_sysconfig dra7xx_epwmss_sysc = { .rev_offs = 0x0, .sysc_offs = 0x4, - .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET, + .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_RESET_STATUS, .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), .sysc_fields = &omap_hwmod_sysc_type2, }; -- cgit v1.2.3 From 6ee8241d17c68b94a91efabfd6bdfe63bb1b79c1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 22 Jul 2019 03:44:42 -0700 Subject: bus: ti-sysc: Fix handling of forced idle For some devices we can get the following warning on boot: ti-sysc 48485200.target-module: sysc_disable_module: invalid midlemode Fix this by treating SYSC_IDLE_FORCE like we do for the other bits for idlemodes mask. Fixes: d59b60564cbf ("bus: ti-sysc: Add generic enable/disable functions") Cc: Roger Quadros Reviewed-by: Suman Anna Tested-by: Keerthy Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index e6deabd8305d..78fb52e1582e 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -949,7 +949,7 @@ static int sysc_best_idle_mode(u32 idlemodes, u32 *best_mode) *best_mode = SYSC_IDLE_SMART_WKUP; else if (idlemodes & BIT(SYSC_IDLE_SMART)) *best_mode = SYSC_IDLE_SMART; - else if (idlemodes & SYSC_IDLE_FORCE) + else if (idlemodes & BIT(SYSC_IDLE_FORCE)) *best_mode = SYSC_IDLE_FORCE; else return -EINVAL; -- cgit v1.2.3 From e212abd452a4af3174fcd469d46656f83e135a19 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 22 Jul 2019 03:44:52 -0700 Subject: bus: ti-sysc: Fix using configured sysc mask value We have cases where there are no softreset bits like with am335x lcdc. In that case ti,sysc-mask = <0> needs to be handled properly. Tested-by: Keerthy Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 78fb52e1582e..4963c7733554 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1692,10 +1692,7 @@ static int sysc_init_sysc_mask(struct sysc *ddata) if (error) return 0; - if (val) - ddata->cfg.sysc_val = val & ddata->cap->sysc_mask; - else - ddata->cfg.sysc_val = ddata->cap->sysc_mask; + ddata->cfg.sysc_val = val & ddata->cap->sysc_mask; return 0; } -- cgit v1.2.3 From 2e8647bbe1c8233a20c32fd2648258f2c05c7335 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 22 Jul 2019 03:44:47 -0700 Subject: ARM: dts: Fix flags for gpio7 The ti,no-idle-on-init and ti,no-reset-on-init flags need to be at the interconnect target module level for the modules that have it defined. Otherwise we get the following warnings: dts flag should be at module level for ti,no-idle-on-init dts flag should be at module level for ti,no-reset-on-init Reviewed-by: Suman Anna Tested-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 2 +- arch/arm/boot/dts/dra7-evm.dts | 2 +- arch/arm/boot/dts/dra7-l4.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index d02f5fa61e5f..df00d1756dae 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -379,7 +379,7 @@ }; }; -&gpio7 { +&gpio7_target { ti,no-reset-on-init; ti,no-idle-on-init; }; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 714e971b912a..de7f85efaa51 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -498,7 +498,7 @@ phy-supply = <&ldousb_reg>; }; -&gpio7 { +&gpio7_target { ti,no-reset-on-init; ti,no-idle-on-init; }; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 23faedec08ab..63628e166c0c 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -1261,7 +1261,7 @@ }; }; - target-module@51000 { /* 0x48051000, ap 45 2e.0 */ + gpio7_target: target-module@51000 { /* 0x48051000, ap 45 2e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "gpio7"; reg = <0x51000 0x4>, -- cgit v1.2.3 From 89bbc6f1eb90809b1538b3a9c54030c558180e3b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 22 Jul 2019 03:44:42 -0700 Subject: ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7 We are currently using a wrong register for dcan revision. Although this is currently only used for detecting the dcan module, let's fix it to avoid confusion. Tested-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx-l4.dtsi | 4 ++++ arch/arm/boot/dts/am437x-l4.dtsi | 4 ++++ arch/arm/boot/dts/dra7-l4.dtsi | 4 ++-- drivers/bus/ti-sysc.c | 3 ++- 4 files changed, 12 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index ced1a19d5f89..4bd22c1edf96 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -1758,6 +1758,8 @@ target-module@cc000 { /* 0x481cc000, ap 60 46.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xcc020 0x4>; + reg-names = "rev"; ti,hwmods = "d_can0"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>, @@ -1780,6 +1782,8 @@ target-module@d0000 { /* 0x481d0000, ap 62 42.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xd0020 0x4>; + reg-names = "rev"; ti,hwmods = "d_can1"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>, diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index 989cb60b9029..04bee4ff9dcb 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -1574,6 +1574,8 @@ target-module@cc000 { /* 0x481cc000, ap 50 46.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xcc020 0x4>; + reg-names = "rev"; ti,hwmods = "d_can0"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>; @@ -1593,6 +1595,8 @@ target-module@d0000 { /* 0x481d0000, ap 52 3a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xd0020 0x4>; + reg-names = "rev"; ti,hwmods = "d_can1"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 63628e166c0c..21e5914fdd62 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -3025,7 +3025,7 @@ target-module@80000 { /* 0x48480000, ap 31 16.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x80000 0x4>; + reg = <0x80020 0x4>; reg-names = "rev"; clocks = <&l4per2_clkctrl DRA7_L4PER2_DCAN2_CLKCTRL 0>; clock-names = "fck"; @@ -4577,7 +4577,7 @@ target-module@c000 { /* 0x4ae3c000, ap 30 04.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0xc000 0x4>; + reg = <0xc020 0x4>; reg-names = "rev"; clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 0>; clock-names = "fck"; diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 4963c7733554..a319e1a748fe 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1267,7 +1267,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { SYSC_QUIRK("control", 0, 0, 0x10, -1, 0x40000900, 0xffffffff, 0), SYSC_QUIRK("cpgmac", 0, 0x1200, 0x1208, 0x1204, 0x4edb1902, 0xffff00f0, 0), - SYSC_QUIRK("dcan", 0, 0, -1, -1, 0xffffffff, 0xffffffff, 0), + SYSC_QUIRK("dcan", 0, 0x20, -1, -1, 0xa3170504, 0xffffffff, 0), + SYSC_QUIRK("dcan", 0, 0x20, -1, -1, 0x4edb1902, 0xffffffff, 0), SYSC_QUIRK("dmic", 0, 0, 0x10, -1, 0x50010000, 0xffffffff, 0), SYSC_QUIRK("dwc3", 0, 0, 0x10, -1, 0x500a0200, 0xffffffff, 0), SYSC_QUIRK("epwmss", 0, 0, 0x4, -1, 0x47400001, 0xffffffff, 0), -- cgit v1.2.3 From a5580eb394c8a48afc3e64aaad68db0d44662cc6 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Wed, 31 Jul 2019 16:11:51 +0200 Subject: ARM: dts: vf610-bk4: Fix qspi node description Before this change the device tree description of qspi node for second memory on BK4 board was wrong (applicable to old, removed fsl-quadspi.c driver). As a result this memory was not recognized correctly when used with the new spi-fsl-qspi.c driver. From the dt-bindings: "Required SPI slave node properties: - reg: There are two buses (A and B) with two chip selects each. This encodes to which bus and CS the flash is connected: <0>: Bus A, CS 0 <1>: Bus A, CS 1 <2>: Bus B, CS 0 <3>: Bus B, CS 1" According to above with new driver the second SPI-NOR memory shall have reg=<2> as it is connected to Bus B, CS 0. Fixes: a67d2c52a82f ("ARM: dts: Add support for Liebherr's BK4 device (vf610 based)") Suggested-by: Fabio Estevam Signed-off-by: Lukasz Majewski Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-bk4.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts index 3fa0cbe456db..0f3870d3b099 100644 --- a/arch/arm/boot/dts/vf610-bk4.dts +++ b/arch/arm/boot/dts/vf610-bk4.dts @@ -246,13 +246,13 @@ reg = <0>; }; - n25q128a13_2: flash@1 { + n25q128a13_2: flash@2 { compatible = "n25q128a13", "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <66000000>; spi-rx-bus-width = <2>; - reg = <1>; + reg = <2>; }; }; -- cgit v1.2.3 From 3d4bacdc207a7b62941700b374e7199cbb184a43 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Tue, 25 Jun 2019 14:36:47 +0200 Subject: arm64: dts: meson-g12a: add missing dwc2 phy-names The G12A USB2 OTG capable PHY uses a 8bit large UTMI bus, and the OTG controller gets the PHY but width by probing the associated phy. By default it will use 16bit wide settings if a phy is not specified, in our case we specified the phy, but not the phy-names. The dwc2 bindings specifies that if phys is present, phy-names shall be "usb2-phy". Adding phy-names = "usb2-phy" solves the OTG PHY bus configuration. Fixes: 9baf7d6be730 ("arm64: dts: meson: g12a: Add G12A USB nodes") Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index f8d43e3dcf20..1785552d450c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -2386,6 +2386,7 @@ clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; clock-names = "ddr"; phys = <&usb2_phy1>; + phy-names = "usb2-phy"; dr_mode = "peripheral"; g-rx-fifo-size = <192>; g-np-tx-fifo-size = <128>; -- cgit v1.2.3 From 54f374d1fd302fe6ca21220174c1dcb294049311 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 1 Jul 2019 13:57:24 +0200 Subject: arm64: dts: meson-g12a-sei510: enable IR controller Enable the IR receiver controller on the SEI510 board. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index c7a87368850b..12aa7eaeaf68 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -339,6 +339,12 @@ pinctrl-names = "default"; }; +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + &pwm_ef { status = "okay"; pinctrl-0 = <&pwm_e_pins>; -- cgit v1.2.3 From dc7f2cb218b5ef65ab3d455a0e62d27e44075203 Mon Sep 17 00:00:00 2001 From: Xavier Ruppen Date: Fri, 19 Jul 2019 21:29:54 +0200 Subject: arm64: dts: amlogic: odroid-n2: keep SD card regulator always on When powering off the Odroid N2, the tflash_vdd regulator is automatically turned off by the kernel. This is a problem when issuing the "reboot" command while using an SD card. The boot ROM does not power this regulator back on, blocking the reboot process at the boot ROM stage, preventing the SD card from being detected. Adding the "regulator-always-on" property fixes the problem. Signed-off-by: Xavier Ruppen Suggested-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Reviewed-by: Martin Blumenstingl Fixes: c35f6dc5c377 ("arm64: dts: meson: Add minimal support for Odroid-N2") [khilman: minor subject change: s/meson/amlogic/] Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts index 81780ffcc7f0..4e916e1f71f7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts @@ -53,6 +53,7 @@ gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>; enable-active-high; + regulator-always-on; }; tf_io: gpio-regulator-tf_io { -- cgit v1.2.3 From 06709e81c668f5f56c65b806895b278517bd44e0 Mon Sep 17 00:00:00 2001 From: John Garry Date: Tue, 30 Jul 2019 21:29:52 +0800 Subject: lib: logic_pio: Fix RCU usage The traversing of io_range_list with list_for_each_entry_rcu() is not properly protected by rcu_read_lock() and rcu_read_unlock(), so add them. These functions mark the critical section scope where the list is protected for the reader, it cannot be "reclaimed". Any updater - in this case, the logical PIO registration functions - cannot update the list until the reader exits this critical section. In addition, the list traversing used in logic_pio_register_range() does not need to use the rcu variant. This is because we are already using io_range_mutex to guarantee mutual exclusion from mutating the list. Cc: stable@vger.kernel.org Fixes: 031e3601869c ("lib: Add generic PIO mapping method") Signed-off-by: John Garry Signed-off-by: Wei Xu --- lib/logic_pio.c | 49 +++++++++++++++++++++++++++++++++++-------------- 1 file changed, 35 insertions(+), 14 deletions(-) diff --git a/lib/logic_pio.c b/lib/logic_pio.c index feea48fd1a0d..761296376fbc 100644 --- a/lib/logic_pio.c +++ b/lib/logic_pio.c @@ -46,7 +46,7 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range) end = new_range->hw_start + new_range->size; mutex_lock(&io_range_mutex); - list_for_each_entry_rcu(range, &io_range_list, list) { + list_for_each_entry(range, &io_range_list, list) { if (range->fwnode == new_range->fwnode) { /* range already there */ goto end_register; @@ -108,26 +108,38 @@ end_register: */ struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode) { - struct logic_pio_hwaddr *range; + struct logic_pio_hwaddr *range, *found_range = NULL; + rcu_read_lock(); list_for_each_entry_rcu(range, &io_range_list, list) { - if (range->fwnode == fwnode) - return range; + if (range->fwnode == fwnode) { + found_range = range; + break; + } } - return NULL; + rcu_read_unlock(); + + return found_range; } /* Return a registered range given an input PIO token */ static struct logic_pio_hwaddr *find_io_range(unsigned long pio) { - struct logic_pio_hwaddr *range; + struct logic_pio_hwaddr *range, *found_range = NULL; + rcu_read_lock(); list_for_each_entry_rcu(range, &io_range_list, list) { - if (in_range(pio, range->io_start, range->size)) - return range; + if (in_range(pio, range->io_start, range->size)) { + found_range = range; + break; + } } - pr_err("PIO entry token %lx invalid\n", pio); - return NULL; + rcu_read_unlock(); + + if (!found_range) + pr_err("PIO entry token 0x%lx invalid\n", pio); + + return found_range; } /** @@ -180,14 +192,23 @@ unsigned long logic_pio_trans_cpuaddr(resource_size_t addr) { struct logic_pio_hwaddr *range; + rcu_read_lock(); list_for_each_entry_rcu(range, &io_range_list, list) { if (range->flags != LOGIC_PIO_CPU_MMIO) continue; - if (in_range(addr, range->hw_start, range->size)) - return addr - range->hw_start + range->io_start; + if (in_range(addr, range->hw_start, range->size)) { + unsigned long cpuaddr; + + cpuaddr = addr - range->hw_start + range->io_start; + + rcu_read_unlock(); + return cpuaddr; + } } - pr_err("addr %llx not registered in io_range_list\n", - (unsigned long long) addr); + rcu_read_unlock(); + + pr_err("addr %pa not registered in io_range_list\n", &addr); + return ~0UL; } -- cgit v1.2.3 From 0a27142bd1ee259e24a0be2b0133e5ca5df8da91 Mon Sep 17 00:00:00 2001 From: John Garry Date: Tue, 30 Jul 2019 21:29:53 +0800 Subject: lib: logic_pio: Avoid possible overlap for unregistering regions The code was originally written to not support unregistering logical PIO regions. To accommodate supporting unregistering logical PIO regions, subtly modify LOGIC_PIO_CPU_MMIO region registration code, such that the "end" of the registered regions is the "end" of the last region, and not the sum of the sizes of all the registered regions. Cc: stable@vger.kernel.org Signed-off-by: John Garry Signed-off-by: Wei Xu --- lib/logic_pio.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/lib/logic_pio.c b/lib/logic_pio.c index 761296376fbc..d0165c88f705 100644 --- a/lib/logic_pio.c +++ b/lib/logic_pio.c @@ -35,7 +35,7 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range) struct logic_pio_hwaddr *range; resource_size_t start; resource_size_t end; - resource_size_t mmio_sz = 0; + resource_size_t mmio_end = 0; resource_size_t iio_sz = MMIO_UPPER_LIMIT; int ret = 0; @@ -56,7 +56,7 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range) /* for MMIO ranges we need to check for overlap */ if (start >= range->hw_start + range->size || end < range->hw_start) { - mmio_sz += range->size; + mmio_end = range->io_start + range->size; } else { ret = -EFAULT; goto end_register; @@ -69,16 +69,16 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range) /* range not registered yet, check for available space */ if (new_range->flags == LOGIC_PIO_CPU_MMIO) { - if (mmio_sz + new_range->size - 1 > MMIO_UPPER_LIMIT) { + if (mmio_end + new_range->size - 1 > MMIO_UPPER_LIMIT) { /* if it's too big check if 64K space can be reserved */ - if (mmio_sz + SZ_64K - 1 > MMIO_UPPER_LIMIT) { + if (mmio_end + SZ_64K - 1 > MMIO_UPPER_LIMIT) { ret = -E2BIG; goto end_register; } new_range->size = SZ_64K; pr_warn("Requested IO range too big, new size set to 64K\n"); } - new_range->io_start = mmio_sz; + new_range->io_start = mmio_end; } else if (new_range->flags == LOGIC_PIO_INDIRECT) { if (iio_sz + new_range->size - 1 > IO_SPACE_LIMIT) { ret = -E2BIG; -- cgit v1.2.3 From b884e2de2afc68ce30f7093747378ef972dde253 Mon Sep 17 00:00:00 2001 From: John Garry Date: Tue, 30 Jul 2019 21:29:54 +0800 Subject: lib: logic_pio: Add logic_pio_unregister_range() Add a function to unregister a logical PIO range. Logical PIO space can still be leaked when unregistering certain LOGIC_PIO_CPU_MMIO regions, but this acceptable for now since there are no callers to unregister LOGIC_PIO_CPU_MMIO regions, and the logical PIO region allocation scheme would need significant work to improve this. Cc: stable@vger.kernel.org Signed-off-by: John Garry Signed-off-by: Wei Xu --- include/linux/logic_pio.h | 1 + lib/logic_pio.c | 14 ++++++++++++++ 2 files changed, 15 insertions(+) diff --git a/include/linux/logic_pio.h b/include/linux/logic_pio.h index cbd9d8495690..88e1e6304a71 100644 --- a/include/linux/logic_pio.h +++ b/include/linux/logic_pio.h @@ -117,6 +117,7 @@ struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode); unsigned long logic_pio_trans_hwaddr(struct fwnode_handle *fwnode, resource_size_t hw_addr, resource_size_t size); int logic_pio_register_range(struct logic_pio_hwaddr *newrange); +void logic_pio_unregister_range(struct logic_pio_hwaddr *range); resource_size_t logic_pio_to_hwaddr(unsigned long pio); unsigned long logic_pio_trans_cpuaddr(resource_size_t hw_addr); diff --git a/lib/logic_pio.c b/lib/logic_pio.c index d0165c88f705..905027574e5d 100644 --- a/lib/logic_pio.c +++ b/lib/logic_pio.c @@ -98,6 +98,20 @@ end_register: return ret; } +/** + * logic_pio_unregister_range - unregister a logical PIO range for a host + * @range: pointer to the IO range which has been already registered. + * + * Unregister a previously-registered IO range node. + */ +void logic_pio_unregister_range(struct logic_pio_hwaddr *range) +{ + mutex_lock(&io_range_mutex); + list_del_rcu(&range->list); + mutex_unlock(&io_range_mutex); + synchronize_rcu(); +} + /** * find_io_range_by_fwnode - find logical PIO range for given FW node * @fwnode: FW node handle associated with logical PIO range -- cgit v1.2.3 From 1b15a5632a809ab57d403fd972ca68785363b654 Mon Sep 17 00:00:00 2001 From: John Garry Date: Tue, 30 Jul 2019 21:29:55 +0800 Subject: bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free If, after registering a logical PIO range, the driver probe later fails, the logical PIO range memory will be released automatically. This causes an issue, in that the logical PIO range is not unregistered and the released range memory may be later referenced. Fix by unregistering the logical PIO range. And since we now unregister the logical PIO range for probe failure, avoid the special ordering of setting logical PIO range ops, which was the previous (poor) attempt at a safeguard against this. Cc: stable@vger.kernel.org Fixes: adf38bb0b595 ("HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings") Signed-off-by: John Garry Signed-off-by: Wei Xu --- drivers/bus/hisi_lpc.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/bus/hisi_lpc.c b/drivers/bus/hisi_lpc.c index 19d7b6ff2f17..6d301aafcad2 100644 --- a/drivers/bus/hisi_lpc.c +++ b/drivers/bus/hisi_lpc.c @@ -606,24 +606,25 @@ static int hisi_lpc_probe(struct platform_device *pdev) range->fwnode = dev->fwnode; range->flags = LOGIC_PIO_INDIRECT; range->size = PIO_INDIRECT_SIZE; + range->hostdata = lpcdev; + range->ops = &hisi_lpc_ops; + lpcdev->io_host = range; ret = logic_pio_register_range(range); if (ret) { dev_err(dev, "register IO range failed (%d)!\n", ret); return ret; } - lpcdev->io_host = range; /* register the LPC host PIO resources */ if (acpi_device) ret = hisi_lpc_acpi_probe(dev); else ret = of_platform_populate(dev->of_node, NULL, NULL, dev); - if (ret) + if (ret) { + logic_pio_unregister_range(range); return ret; - - lpcdev->io_host->hostdata = lpcdev; - lpcdev->io_host->ops = &hisi_lpc_ops; + } io_end = lpcdev->io_host->io_start + lpcdev->io_host->size; dev_info(dev, "registered range [%pa - %pa]\n", -- cgit v1.2.3 From 10e62b47973b0b0ceda076255bcb147b83e20517 Mon Sep 17 00:00:00 2001 From: John Garry Date: Tue, 30 Jul 2019 21:29:56 +0800 Subject: bus: hisi_lpc: Add .remove method to avoid driver unbind crash The original driver author seemed to be under the impression that a driver cannot be removed if it does not have a .remove method. Or maybe if it is a built-in platform driver. This is not true. This crash can be created: root@ubuntu:/sys/bus/platform/drivers/hisi-lpc# echo HISI0191\:00 > unbind root@ubuntu:/sys/bus/platform/drivers/hisi-lpc# ipmitool raw 6 1 Unable to handle kernel paging request at virtual address ffff000010035010 Mem abort info: ESR = 0x96000047 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000047 CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000000118b000 [ffff000010035010] pgd=0000041ffbfff003, pud=0000041ffbffe003, pmd=0000041ffbffd003, pte=0000000000000000 Internal error: Oops: 96000047 [#1] PREEMPT SMP Modules linked in: CPU: 17 PID: 1473 Comm: ipmitool Not tainted 5.2.0-rc5-00003-gf68c53b414a3-dirty #198 Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018 pstate: 20000085 (nzCv daIf -PAN -UAO) pc : hisi_lpc_target_in+0x7c/0x120 lr : hisi_lpc_target_in+0x70/0x120 sp : ffff00001efe3930 x29: ffff00001efe3930 x28: ffff841f9f599200 x27: 0000000000000002 x26: 0000000000000000 x25: 0000000000000080 x24: 00000000000000e4 x23: 0000000000000000 x22: 0000000000000064 x21: ffff801fb667d280 x20: 0000000000000001 x19: ffff00001efe39ac x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff841febe60340 x7 : ffff801fb55c52e8 x6 : 0000000000000000 x5 : 0000000000ffc0e3 x4 : 0000000000000001 x3 : ffff801fb667d280 x2 : 0000000000000001 x1 : ffff000010035010 x0 : ffff000010035000 Call trace: hisi_lpc_target_in+0x7c/0x120 hisi_lpc_comm_in+0x88/0x98 logic_inb+0x5c/0xb8 port_inb+0x18/0x20 bt_event+0x38/0x808 smi_event_handler+0x4c/0x5a0 check_start_timer_thread.part.4+0x40/0x58 sender+0x78/0x88 smi_send.isra.6+0x94/0x108 i_ipmi_request+0x2c4/0x8f8 ipmi_request_settime+0x124/0x160 handle_send_req+0x19c/0x208 ipmi_ioctl+0x2c0/0x990 do_vfs_ioctl+0xb8/0x8f8 ksys_ioctl+0x80/0xb8 __arm64_sys_ioctl+0x1c/0x28 el0_svc_common.constprop.0+0x64/0x160 el0_svc_handler+0x28/0x78 el0_svc+0x8/0xc Code: 941d1511 aa0003f9 f94006a0 91004001 (b9000034) ---[ end trace aa842b86af7069e4 ]--- The problem here is that the host goes away but the associated logical PIO region remains registered, as do the children devices. Fix by adding a .remove method to tidy-up by removing the child devices and unregistering the logical PIO region. Cc: stable@vger.kernel.org Fixes: adf38bb0b595 ("HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings") Signed-off-by: John Garry Signed-off-by: Wei Xu --- drivers/bus/hisi_lpc.c | 38 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 36 insertions(+), 2 deletions(-) diff --git a/drivers/bus/hisi_lpc.c b/drivers/bus/hisi_lpc.c index 6d301aafcad2..20c957185af2 100644 --- a/drivers/bus/hisi_lpc.c +++ b/drivers/bus/hisi_lpc.c @@ -456,6 +456,17 @@ struct hisi_lpc_acpi_cell { size_t pdata_size; }; +static void hisi_lpc_acpi_remove(struct device *hostdev) +{ + struct acpi_device *adev = ACPI_COMPANION(hostdev); + struct acpi_device *child; + + device_for_each_child(hostdev, NULL, hisi_lpc_acpi_remove_subdev); + + list_for_each_entry(child, &adev->children, node) + acpi_device_clear_enumerated(child); +} + /* * hisi_lpc_acpi_probe - probe children for ACPI FW * @hostdev: LPC host device pointer @@ -555,8 +566,7 @@ static int hisi_lpc_acpi_probe(struct device *hostdev) return 0; fail: - device_for_each_child(hostdev, NULL, - hisi_lpc_acpi_remove_subdev); + hisi_lpc_acpi_remove(hostdev); return ret; } @@ -569,6 +579,10 @@ static int hisi_lpc_acpi_probe(struct device *dev) { return -ENODEV; } + +static void hisi_lpc_acpi_remove(struct device *hostdev) +{ +} #endif // CONFIG_ACPI /* @@ -626,6 +640,8 @@ static int hisi_lpc_probe(struct platform_device *pdev) return ret; } + dev_set_drvdata(dev, lpcdev); + io_end = lpcdev->io_host->io_start + lpcdev->io_host->size; dev_info(dev, "registered range [%pa - %pa]\n", &lpcdev->io_host->io_start, &io_end); @@ -633,6 +649,23 @@ static int hisi_lpc_probe(struct platform_device *pdev) return ret; } +static int hisi_lpc_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct acpi_device *acpi_device = ACPI_COMPANION(dev); + struct hisi_lpc_dev *lpcdev = dev_get_drvdata(dev); + struct logic_pio_hwaddr *range = lpcdev->io_host; + + if (acpi_device) + hisi_lpc_acpi_remove(dev); + else + of_platform_depopulate(dev); + + logic_pio_unregister_range(range); + + return 0; +} + static const struct of_device_id hisi_lpc_of_match[] = { { .compatible = "hisilicon,hip06-lpc", }, { .compatible = "hisilicon,hip07-lpc", }, @@ -646,5 +679,6 @@ static struct platform_driver hisi_lpc_driver = { .acpi_match_table = ACPI_PTR(hisi_lpc_acpi_match), }, .probe = hisi_lpc_probe, + .remove = hisi_lpc_remove, }; builtin_platform_driver(hisi_lpc_driver); -- cgit v1.2.3 From 45da5e09dd32fa98c32eaafe2513db6bd75e2f4f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 23 Jul 2019 04:37:45 -0700 Subject: ARM: OMAP2+: Fix omap4 errata warning on other SoCs We have errata i688 workaround produce warnings on SoCs other than omap4 and omap5: omap4_sram_init:Unable to allocate sram needed to handle errata I688 omap4_sram_init:Unable to get sram pool needed to handle errata I688 This is happening because there is no ti,omap4-mpu node, or no SRAM to configure for the other SoCs, so let's remove the warning based on the SoC revision checks. As nobody has complained it seems that the other SoC variants do not need this workaround. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap4-common.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index b226c8aaf8b1..7074cfd1ff41 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -131,6 +131,9 @@ static int __init omap4_sram_init(void) struct device_node *np; struct gen_pool *sram_pool; + if (!soc_is_omap44xx() && !soc_is_omap54xx()) + return 0; + np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu"); if (!np) pr_warn("%s:Unable to allocate sram needed to handle errata I688\n", -- cgit v1.2.3 From 8613e2ca4fff764f23785eadfa54a08631ee682a Mon Sep 17 00:00:00 2001 From: Emmanuel Vadot Date: Wed, 24 Jul 2019 14:23:29 +0200 Subject: ARM: dts: am335x: Fix UARTs length As seen on the AM335x TRM all the UARTs controller only are 0x1000 in size. Fix this in the DTS. Signed-off-by: Emmanuel Vadot Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx-l4.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index ced1a19d5f89..a20b04b72be4 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -185,7 +185,7 @@ uart0: serial@0 { compatible = "ti,am3352-uart", "ti,omap3-uart"; clock-frequency = <48000000>; - reg = <0x0 0x2000>; + reg = <0x0 0x1000>; interrupts = <72>; status = "disabled"; dmas = <&edma 26 0>, <&edma 27 0>; @@ -934,7 +934,7 @@ uart1: serial@0 { compatible = "ti,am3352-uart", "ti,omap3-uart"; clock-frequency = <48000000>; - reg = <0x0 0x2000>; + reg = <0x0 0x1000>; interrupts = <73>; status = "disabled"; dmas = <&edma 28 0>, <&edma 29 0>; @@ -966,7 +966,7 @@ uart2: serial@0 { compatible = "ti,am3352-uart", "ti,omap3-uart"; clock-frequency = <48000000>; - reg = <0x0 0x2000>; + reg = <0x0 0x1000>; interrupts = <74>; status = "disabled"; dmas = <&edma 30 0>, <&edma 31 0>; @@ -1614,7 +1614,7 @@ uart3: serial@0 { compatible = "ti,am3352-uart", "ti,omap3-uart"; clock-frequency = <48000000>; - reg = <0x0 0x2000>; + reg = <0x0 0x1000>; interrupts = <44>; status = "disabled"; }; @@ -1644,7 +1644,7 @@ uart4: serial@0 { compatible = "ti,am3352-uart", "ti,omap3-uart"; clock-frequency = <48000000>; - reg = <0x0 0x2000>; + reg = <0x0 0x1000>; interrupts = <45>; status = "disabled"; }; @@ -1674,7 +1674,7 @@ uart5: serial@0 { compatible = "ti,am3352-uart", "ti,omap3-uart"; clock-frequency = <48000000>; - reg = <0x0 0x2000>; + reg = <0x0 0x1000>; interrupts = <46>; status = "disabled"; }; -- cgit v1.2.3 From 07f9a8be66a9bd86f9eaedf8f8aeb416195adab8 Mon Sep 17 00:00:00 2001 From: Faiz Abbas Date: Wed, 7 Aug 2019 16:22:38 +0530 Subject: ARM: dts: dra74x: Fix iodelay configuration for mmc3 According to the latest am572x[1] and dra74x[2] data manuals, mmc3 default, hs, sdr12 and sdr25 modes use iodelay values given in MMC3_MANUAL1. Set the MODE_SELECT bit for these so that manual mode is selected and correct iodelay values can be configured. [1] http://www.ti.com/lit/ds/symlink/am5728.pdf [2] http://www.ti.com/lit/ds/symlink/dra746.pdf Signed-off-by: Faiz Abbas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi | 50 +++++++++++++++---------------- 1 file changed, 25 insertions(+), 25 deletions(-) diff --git a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi index 28ebb4eb884a..214b9e6de2c3 100644 --- a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi +++ b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi @@ -32,7 +32,7 @@ * * Datamanual Revisions: * - * AM572x Silicon Revision 2.0: SPRS953B, Revised November 2016 + * AM572x Silicon Revision 2.0: SPRS953F, Revised May 2019 * AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016 * */ @@ -229,45 +229,45 @@ mmc3_pins_default: mmc3_pins_default { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ - DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ - DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ - DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ - DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ - DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ >; }; mmc3_pins_hs: mmc3_pins_hs { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ - DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ - DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ - DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ - DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ - DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ >; }; mmc3_pins_sdr12: mmc3_pins_sdr12 { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ - DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ - DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ - DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ - DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ - DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ >; }; mmc3_pins_sdr25: mmc3_pins_sdr25 { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ - DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ - DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ - DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ - DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ - DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ >; }; -- cgit v1.2.3 From fa8397e45c64e60c80373bc19ee56e42a6bed9b6 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Sun, 11 Aug 2019 10:48:02 +0200 Subject: ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack Non-serio path of Amstrad Delta FIQ deferred handler depended on irq_ack() method provided by OMAP GPIO driver. That method has been removed by commit 693de831c6e5 ("gpio: omap: remove irq_ack method"). Remove useless code from the deferred handler and reimplement the missing operation inside the base FIQ handler. Should another dependency - irq_unmask() - be ever removed from the OMAP GPIO driver, WARN once if missing. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/ams-delta-fiq-handler.S | 3 ++- arch/arm/mach-omap1/ams-delta-fiq.c | 4 +--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index 7c9fb7fe0070..938d872b6142 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -129,6 +129,8 @@ restart: orr r11, r11, r13 @ mask all requested interrupts str r11, [r12, #OMAP1510_GPIO_INT_MASK] + str r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack all requested interrupts + ands r10, r13, #KEYBRD_CLK_MASK @ extract keyboard status - set? beq hksw @ no - try next source @@ -136,7 +138,6 @@ restart: @@@@@@@@@@@@@@@@@@@@@@ @ Keyboard clock FIQ mode interrupt handler @ r10 now contains KEYBRD_CLK_MASK, use it - str r10, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack the interrupt bic r11, r11, r10 @ unmask it str r11, [r12, #OMAP1510_GPIO_INT_MASK] diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index 51212133ce06..dedaf715f47c 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -72,9 +72,7 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id) * interrupts default to since commit 80ac93c27441 * requires interrupt already acked and unmasked. */ - if (irq_chip->irq_ack) - irq_chip->irq_ack(d); - if (irq_chip->irq_unmask) + if (!WARN_ON_ONCE(!irq_chip->irq_unmask)) irq_chip->irq_unmask(d); } for (; irq_counter[gpio] < fiq_count; irq_counter[gpio]++) -- cgit v1.2.3 From a304f483b6b00d42bde41c45ca52c670945348e2 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Tue, 25 Jun 2019 18:33:15 -0500 Subject: bus: ti-sysc: Simplify cleanup upon failures in sysc_probe() The clocks are not yet parsed and prepared until after a successful sysc_get_clocks(), so there is no need to unprepare the clocks upon any failure of any of the prior functions in sysc_probe(). The current code path would have been a no-op because of the clock validity checks within sysc_unprepare(), but let's just simplify the cleanup path by returning the error directly. While at this, also fix the cleanup path for a sysc_init_resets() failure which is executed after the clocks are prepared. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index a319e1a748fe..2db474ab4c6b 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -2383,27 +2383,27 @@ static int sysc_probe(struct platform_device *pdev) error = sysc_init_dts_quirks(ddata); if (error) - goto unprepare; + return error; error = sysc_map_and_check_registers(ddata); if (error) - goto unprepare; + return error; error = sysc_init_sysc_mask(ddata); if (error) - goto unprepare; + return error; error = sysc_init_idlemodes(ddata); if (error) - goto unprepare; + return error; error = sysc_init_syss_mask(ddata); if (error) - goto unprepare; + return error; error = sysc_init_pdata(ddata); if (error) - goto unprepare; + return error; sysc_init_early_quirks(ddata); @@ -2413,7 +2413,7 @@ static int sysc_probe(struct platform_device *pdev) error = sysc_init_resets(ddata); if (error) - return error; + goto unprepare; error = sysc_init_module(ddata); if (error) -- cgit v1.2.3 From 5b63fb90adb95a178ad403e1703f59bf1ff2c16b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 23 Jul 2019 00:29:23 -0700 Subject: ARM: dts: Fix incomplete dts data for am3 and am4 mmc Commit 4e27f752ab8c ("ARM: OMAP2+: Drop mmc platform data for am330x and am43xx") dropped legacy mmc platform data for am3 and am4, but missed the fact that we never updated the dts files for mmc3 that is directly on l3 interconnect instead of l4 interconnect. This leads to a situation with no legacy platform data and incomplete dts data. Let's update the mmc instances on l3 interconnect to probe properly with ti-sysc interconnect target module driver to make mmc3 work again. Let's still keep legacy "ti,hwmods" property around for v5.2 kernel and only drop it later on. Note that there is no need to use property status = "disabled" for mmc3. The default for dts is enabled, and runtime PM will idle unused instances just fine. Fixes: 4e27f752ab8c ("ARM: OMAP2+: Drop mmc platform data for am330x and am43xx") Reported-by: David Lechner Tested-by: David Lechner Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 32 ++++++++++++++++++++++++++------ arch/arm/boot/dts/am4372.dtsi | 32 ++++++++++++++++++++++++++------ 2 files changed, 52 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index e5c2f71a7c77..fb6b8aa12cc5 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -234,13 +234,33 @@ interrupt-names = "edma3_tcerrint"; }; - mmc3: mmc@47810000 { - compatible = "ti,omap4-hsmmc"; + target-module@47810000 { + compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "mmc3"; - ti,needs-special-reset; - interrupts = <29>; - reg = <0x47810000 0x1000>; - status = "disabled"; + reg = <0x478102fc 0x4>, + <0x47810110 0x4>, + <0x47810114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x47810000 0x1000>; + + mmc3: mmc@0 { + compatible = "ti,omap4-hsmmc"; + ti,needs-special-reset; + interrupts = <29>; + reg = <0x0 0x1000>; + }; }; usb: usb@47400000 { diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 55aff4db9c7c..848e2a8884e2 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -228,13 +228,33 @@ interrupt-names = "edma3_tcerrint"; }; - mmc3: mmc@47810000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x47810000 0x1000>; + target-module@47810000 { + compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "mmc3"; - ti,needs-special-reset; - interrupts = ; - status = "disabled"; + reg = <0x478102fc 0x4>, + <0x47810110 0x4>, + <0x47810114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x47810000 0x1000>; + + mmc3: mmc@0 { + compatible = "ti,omap4-hsmmc"; + ti,needs-special-reset; + interrupts = ; + reg = <0x0 0x1000>; + }; }; sham: sham@53100000 { -- cgit v1.2.3 From 0c0d1ec21b2f6070e22b54b2de874f1af960ced8 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sun, 28 Jul 2019 18:22:40 -0500 Subject: ARM: OMAP: dma: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: arch/arm/plat-omap/dma.c: In function 'omap_set_dma_src_burst_mode': arch/arm/plat-omap/dma.c:384:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:393:2: note: here case OMAP_DMA_DATA_BURST_16: ^~~~ arch/arm/plat-omap/dma.c:394:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:402:2: note: here default: ^~~~~~~ arch/arm/plat-omap/dma.c: In function 'omap_set_dma_dest_burst_mode': arch/arm/plat-omap/dma.c:473:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:481:2: note: here default: ^~~~~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: Stephen Rothwell Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 79f43acf9acb..08c99413d02c 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -388,17 +388,15 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) /* * not supported by current hardware on OMAP1 * w |= (0x03 << 7); - * fall through */ + /* fall through */ case OMAP_DMA_DATA_BURST_16: if (dma_omap2plus()) { burst = 0x3; break; } - /* - * OMAP1 don't support burst 16 - * fall through - */ + /* OMAP1 don't support burst 16 */ + /* fall through */ default: BUG(); } @@ -474,10 +472,8 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) burst = 0x3; break; } - /* - * OMAP1 don't support burst 16 - * fall through - */ + /* OMAP1 don't support burst 16 */ + /* fall through */ default: printk(KERN_ERR "Invalid DMA burst mode\n"); BUG(); -- cgit v1.2.3 From d8e0cecbcaf09f38661bfb7da4c1e62297308672 Mon Sep 17 00:00:00 2001 From: Keerthy Date: Wed, 26 Jun 2019 13:20:14 +0530 Subject: soc: ti: pm33xx: Fix static checker warnings The patch fixes a bunch of static checker warnings. Reported-by: Dan Carpenter Signed-off-by: Keerthy Signed-off-by: Tony Lindgren --- drivers/soc/ti/pm33xx.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c index bb77c220b6f8..5f3a4499cf40 100644 --- a/drivers/soc/ti/pm33xx.c +++ b/drivers/soc/ti/pm33xx.c @@ -252,7 +252,7 @@ static int am33xx_pm_begin(suspend_state_t state) if (state == PM_SUSPEND_MEM && pm_ops->check_off_mode_enable()) { nvmem = devm_nvmem_device_get(&omap_rtc->dev, "omap_rtc_scratch0"); - if (nvmem) + if (!IS_ERR(nvmem)) nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4, (void *)&rtc_magic_val); rtc_only_idle = 1; @@ -278,9 +278,12 @@ static void am33xx_pm_end(void) struct nvmem_device *nvmem; nvmem = devm_nvmem_device_get(&omap_rtc->dev, "omap_rtc_scratch0"); + if (IS_ERR(nvmem)) + return; + m3_ipc->ops->finish_low_power(m3_ipc); if (rtc_only_idle) { - if (retrigger_irq) + if (retrigger_irq) { /* * 32 bits of Interrupt Set-Pending correspond to 32 * 32 interrupts. Compute the bit offset of the @@ -291,8 +294,10 @@ static void am33xx_pm_end(void) writel_relaxed(1 << (retrigger_irq & 31), gic_dist_base + GIC_INT_SET_PENDING_BASE + retrigger_irq / 32 * 4); - nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4, - (void *)&val); + } + + nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4, + (void *)&val); } rtc_only_idle = 0; @@ -415,7 +420,7 @@ static int am33xx_pm_rtc_setup(void) nvmem = devm_nvmem_device_get(&omap_rtc->dev, "omap_rtc_scratch0"); - if (nvmem) { + if (!IS_ERR(nvmem)) { nvmem_device_read(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4, (void *)&rtc_magic_val); if ((rtc_magic_val & 0xffff) != RTC_REG_BOOT_MAGIC) -- cgit v1.2.3 From 4a65bbb9109ed7edd4b6ed7168ced48abb8561a2 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Sat, 13 Apr 2019 22:12:43 +0800 Subject: soc: ti: pm33xx: Make two symbols static Fix sparse warnings: drivers/soc/ti/pm33xx.c:144:27: warning: symbol 'rtc_wake_src' was not declared. Should it be static? drivers/soc/ti/pm33xx.c:160:5: warning: symbol 'am33xx_rtc_only_idle' was not declared. Should it be static? Signed-off-by: YueHaibing Signed-off-by: Tony Lindgren --- drivers/soc/ti/pm33xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c index 5f3a4499cf40..ccc6d53fe788 100644 --- a/drivers/soc/ti/pm33xx.c +++ b/drivers/soc/ti/pm33xx.c @@ -141,7 +141,7 @@ static int __init am43xx_map_gic(void) } #ifdef CONFIG_SUSPEND -struct wkup_m3_wakeup_src rtc_wake_src(void) +static struct wkup_m3_wakeup_src rtc_wake_src(void) { u32 i; @@ -157,7 +157,7 @@ struct wkup_m3_wakeup_src rtc_wake_src(void) return rtc_ext_wakeup; } -int am33xx_rtc_only_idle(unsigned long wfi_flags) +static int am33xx_rtc_only_idle(unsigned long wfi_flags) { omap_rtc_power_off_program(&omap_rtc->dev); am33xx_do_wfi_sram(wfi_flags); -- cgit v1.2.3 From dec43da46f63eb71f519d963ba6832838e4262a3 Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Thu, 25 Jul 2019 10:48:45 +0800 Subject: fpga: altera-ps-spi: Fix getting of optional confd gpio Currently the driver does not handle EPROBE_DEFER for the confd gpio. Use devm_gpiod_get_optional() instead of devm_gpiod_get() and return error codes from altera_ps_probe(). Fixes: 5692fae0742d ("fpga manager: Add altera-ps-spi driver for Altera FPGAs") Signed-off-by: Phil Reid Signed-off-by: Moritz Fischer --- drivers/fpga/altera-ps-spi.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/fpga/altera-ps-spi.c b/drivers/fpga/altera-ps-spi.c index a13f224303c6..0221dee8dd4c 100644 --- a/drivers/fpga/altera-ps-spi.c +++ b/drivers/fpga/altera-ps-spi.c @@ -210,7 +210,7 @@ static int altera_ps_write_complete(struct fpga_manager *mgr, return -EIO; } - if (!IS_ERR(conf->confd)) { + if (conf->confd) { if (!gpiod_get_raw_value_cansleep(conf->confd)) { dev_err(&mgr->dev, "CONF_DONE is inactive!\n"); return -EIO; @@ -289,10 +289,13 @@ static int altera_ps_probe(struct spi_device *spi) return PTR_ERR(conf->status); } - conf->confd = devm_gpiod_get(&spi->dev, "confd", GPIOD_IN); + conf->confd = devm_gpiod_get_optional(&spi->dev, "confd", GPIOD_IN); if (IS_ERR(conf->confd)) { - dev_warn(&spi->dev, "Not using confd gpio: %ld\n", - PTR_ERR(conf->confd)); + dev_err(&spi->dev, "Failed to get confd gpio: %ld\n", + PTR_ERR(conf->confd)); + return PTR_ERR(conf->confd); + } else if (!conf->confd) { + dev_warn(&spi->dev, "Not using confd gpio"); } /* Register manager with unique name */ -- cgit v1.2.3 From 0f686ca933597cfcc0636253fc1740423c062ec7 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Fri, 9 Aug 2019 01:24:30 +0300 Subject: Revert "mmc: sdhci-tegra: drop ->get_ro() implementation" The WRITE_PROTECT bit is always in a "protected mode" on Tegra and WP-GPIO state need to be used instead. In a case of the GPIO absence, write-enable should be assumed. External SD is writable once again as a result of this patch because the offending commit changed behaviour for the case of a missing WP-GPIO to fall back to WRITE_PROTECT bit-checking, which is incorrect for Tegra. Cc: stable@vger.kernel.org # v5.1+ Fixes: e8391453e27f ("mmc: sdhci-tegra: drop ->get_ro() implementation") Signed-off-by: Dmitry Osipenko Acked-by: Thierry Reding Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-tegra.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index f4d4761cf20a..02d8f524bb9e 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -258,6 +258,16 @@ static void tegra210_sdhci_writew(struct sdhci_host *host, u16 val, int reg) } } +static unsigned int tegra_sdhci_get_ro(struct sdhci_host *host) +{ + /* + * Write-enable shall be assumed if GPIO is missing in a board's + * device-tree because SDHCI's WRITE_PROTECT bit doesn't work on + * Tegra. + */ + return mmc_gpio_get_ro(host->mmc); +} + static bool tegra_sdhci_is_pad_and_regulator_valid(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); @@ -1224,6 +1234,7 @@ static const struct cqhci_host_ops sdhci_tegra_cqhci_ops = { }; static const struct sdhci_ops tegra_sdhci_ops = { + .get_ro = tegra_sdhci_get_ro, .read_w = tegra_sdhci_readw, .write_l = tegra_sdhci_writel, .set_clock = tegra_sdhci_set_clock, @@ -1279,6 +1290,7 @@ static const struct sdhci_tegra_soc_data soc_data_tegra30 = { }; static const struct sdhci_ops tegra114_sdhci_ops = { + .get_ro = tegra_sdhci_get_ro, .read_w = tegra_sdhci_readw, .write_w = tegra_sdhci_writew, .write_l = tegra_sdhci_writel, @@ -1332,6 +1344,7 @@ static const struct sdhci_tegra_soc_data soc_data_tegra124 = { }; static const struct sdhci_ops tegra210_sdhci_ops = { + .get_ro = tegra_sdhci_get_ro, .read_w = tegra_sdhci_readw, .write_w = tegra210_sdhci_writew, .write_l = tegra_sdhci_writel, @@ -1366,6 +1379,7 @@ static const struct sdhci_tegra_soc_data soc_data_tegra210 = { }; static const struct sdhci_ops tegra186_sdhci_ops = { + .get_ro = tegra_sdhci_get_ro, .read_w = tegra_sdhci_readw, .write_l = tegra_sdhci_writel, .set_clock = tegra_sdhci_set_clock, -- cgit v1.2.3 From 3afa758cfb6efe0dc94dd8500add7222f503bfa5 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 20 Aug 2019 21:16:27 -0500 Subject: usb: udc: lpc32xx: silence fall-through warning Silence the following fall-through warning by adding a break statement: drivers/usb/gadget/udc/lpc32xx_udc.c:2230:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Gustavo A. R. Silva Link: https://lore.kernel.org/r/20190821021627.GA2679@embeddedor Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/lpc32xx_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c index 5f1b14f3e5a0..bb6af6b5ac97 100644 --- a/drivers/usb/gadget/udc/lpc32xx_udc.c +++ b/drivers/usb/gadget/udc/lpc32xx_udc.c @@ -2265,7 +2265,7 @@ static void udc_handle_ep0_setup(struct lpc32xx_udc *udc) default: break; } - + break; case USB_REQ_SET_ADDRESS: if (reqtype == (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) { -- cgit v1.2.3 From de7b9aa633b693e77942e12f1769506efae6917b Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 20 Aug 2019 11:28:25 +0200 Subject: usbtmc: more sanity checking for packet size A malicious device can make the driver divide ny zero with a nonsense maximum packet size. Signed-off-by: Oliver Neukum Cc: stable Link: https://lore.kernel.org/r/20190820092826.17694-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/usbtmc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 4942122b2346..36858ddd8d9b 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -2362,8 +2362,11 @@ static int usbtmc_probe(struct usb_interface *intf, goto err_put; } + retcode = -EINVAL; data->bulk_in = bulk_in->bEndpointAddress; data->wMaxPacketSize = usb_endpoint_maxp(bulk_in); + if (!data->wMaxPacketSize) + goto err_put; dev_dbg(&intf->dev, "Found bulk in endpoint at %u\n", data->bulk_in); data->bulk_out = bulk_out->bEndpointAddress; -- cgit v1.2.3 From cbe85c88ce80fb92956a0793518d415864dcead8 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 20 Aug 2019 02:07:58 +0000 Subject: usb: chipidea: udc: don't do hardware access if gadget has stopped After _gadget_stop_activity is executed, we can consider the hardware operation for gadget has finished, and the udc can be stopped and enter low power mode. So, any later hardware operations (from usb_ep_ops APIs or usb_gadget_ops APIs) should be considered invalid, any deinitializatons has been covered at _gadget_stop_activity. I meet this problem when I plug out usb cable from PC using mass_storage gadget, my callstack like: vbus interrupt->.vbus_session-> composite_disconnect ->pm_runtime_put_sync(&_gadget->dev), the composite_disconnect will call fsg_disable, but fsg_disable calls usb_ep_disable using async way, there are register accesses for usb_ep_disable. So sometimes, I get system hang due to visit register without clock, sometimes not. The Linux Kernel USB maintainer Alan Stern suggests this kinds of solution. See: http://marc.info/?l=linux-usb&m=138541769810983&w=2. Cc: #v4.9+ Signed-off-by: Peter Chen Link: https://lore.kernel.org/r/20190820020503.27080-2-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/udc.c | 32 ++++++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 8 deletions(-) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 6a5ee8e6da10..67ad40b0a05b 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -709,12 +709,6 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget); unsigned long flags; - spin_lock_irqsave(&ci->lock, flags); - ci->gadget.speed = USB_SPEED_UNKNOWN; - ci->remote_wakeup = 0; - ci->suspended = 0; - spin_unlock_irqrestore(&ci->lock, flags); - /* flush all endpoints */ gadget_for_each_ep(ep, gadget) { usb_ep_fifo_flush(ep); @@ -732,6 +726,12 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) ci->status = NULL; } + spin_lock_irqsave(&ci->lock, flags); + ci->gadget.speed = USB_SPEED_UNKNOWN; + ci->remote_wakeup = 0; + ci->suspended = 0; + spin_unlock_irqrestore(&ci->lock, flags); + return 0; } @@ -1303,6 +1303,10 @@ static int ep_disable(struct usb_ep *ep) return -EBUSY; spin_lock_irqsave(hwep->lock, flags); + if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) { + spin_unlock_irqrestore(hwep->lock, flags); + return 0; + } /* only internal SW should disable ctrl endpts */ @@ -1392,6 +1396,10 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, return -EINVAL; spin_lock_irqsave(hwep->lock, flags); + if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) { + spin_unlock_irqrestore(hwep->lock, flags); + return 0; + } retval = _ep_queue(ep, req, gfp_flags); spin_unlock_irqrestore(hwep->lock, flags); return retval; @@ -1415,8 +1423,8 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) return -EINVAL; spin_lock_irqsave(hwep->lock, flags); - - hw_ep_flush(hwep->ci, hwep->num, hwep->dir); + if (hwep->ci->gadget.speed != USB_SPEED_UNKNOWN) + hw_ep_flush(hwep->ci, hwep->num, hwep->dir); list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) { dma_pool_free(hwep->td_pool, node->ptr, node->dma); @@ -1487,6 +1495,10 @@ static void ep_fifo_flush(struct usb_ep *ep) } spin_lock_irqsave(hwep->lock, flags); + if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) { + spin_unlock_irqrestore(hwep->lock, flags); + return; + } hw_ep_flush(hwep->ci, hwep->num, hwep->dir); @@ -1559,6 +1571,10 @@ static int ci_udc_wakeup(struct usb_gadget *_gadget) int ret = 0; spin_lock_irqsave(&ci->lock, flags); + if (ci->gadget.speed == USB_SPEED_UNKNOWN) { + spin_unlock_irqrestore(&ci->lock, flags); + return 0; + } if (!ci->remote_wakeup) { ret = -EOPNOTSUPP; goto out; -- cgit v1.2.3 From 08d676d1685c2a29e4d0e1b0242324e564d4589e Mon Sep 17 00:00:00 2001 From: Henk van der Laan Date: Fri, 16 Aug 2019 22:08:47 +0200 Subject: usb-storage: Add new JMS567 revision to unusual_devs Revision 0x0117 suffers from an identical issue to earlier revisions, therefore it should be added to the quirks list. Signed-off-by: Henk van der Laan Cc: stable Link: https://lore.kernel.org/r/20190816200847.21366-1-opensource@henkvdlaan.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index ea0d27a94afe..1cd9b6305b06 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2100,7 +2100,7 @@ UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201, US_FL_IGNORE_RESIDUE ), /* Reported by Michael Büsch */ -UNUSUAL_DEV( 0x152d, 0x0567, 0x0114, 0x0116, +UNUSUAL_DEV( 0x152d, 0x0567, 0x0114, 0x0117, "JMicron", "USB to ATA/ATAPI Bridge", USB_SC_DEVICE, USB_PR_DEVICE, NULL, -- cgit v1.2.3 From 5871cd93692c8071fb9358daccb715b5081316ac Mon Sep 17 00:00:00 2001 From: Gary R Hook Date: Mon, 19 Aug 2019 22:23:27 +0000 Subject: crypto: ccp - Ignore unconfigured CCP device on suspend/resume If a CCP is unconfigured (e.g. there are no available queues) then there will be no data structures allocated for the device. Thus, we must check for validity of a pointer before trying to access structure members. Fixes: 720419f01832f ("crypto: ccp - Introduce the AMD Secure Processor device") Cc: Signed-off-by: Gary R Hook Signed-off-by: Herbert Xu --- drivers/crypto/ccp/ccp-dev.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/crypto/ccp/ccp-dev.c b/drivers/crypto/ccp/ccp-dev.c index f3ff36f93207..db99af89ef18 100644 --- a/drivers/crypto/ccp/ccp-dev.c +++ b/drivers/crypto/ccp/ccp-dev.c @@ -540,6 +540,10 @@ int ccp_dev_suspend(struct sp_device *sp, pm_message_t state) unsigned long flags; unsigned int i; + /* If there's no device there's nothing to do */ + if (!ccp) + return 0; + spin_lock_irqsave(&ccp->cmd_lock, flags); ccp->suspending = 1; @@ -564,6 +568,10 @@ int ccp_dev_resume(struct sp_device *sp) unsigned long flags; unsigned int i; + /* If there's no device there's nothing to do */ + if (!ccp) + return 0; + spin_lock_irqsave(&ccp->cmd_lock, flags); ccp->suspending = 0; -- cgit v1.2.3 From 7871aa60ae0086fe4626abdf5ed13eeddf306c61 Mon Sep 17 00:00:00 2001 From: Eugen Hristev Date: Thu, 8 Aug 2019 08:35:40 +0000 Subject: mmc: sdhci-of-at91: add quirk for broken HS200 HS200 is not implemented in the driver, but the controller claims it through caps. Remove it via a quirk, to make sure the mmc core do not try to enable HS200, as it causes the eMMC initialization to fail. Signed-off-by: Eugen Hristev Acked-by: Ludovic Desroches Acked-by: Adrian Hunter Fixes: bb5f8ea4d514 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-of-at91.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index d4e7e8b7be77..e7d1920729fb 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -357,6 +357,9 @@ static int sdhci_at91_probe(struct platform_device *pdev) pm_runtime_set_autosuspend_delay(&pdev->dev, 50); pm_runtime_use_autosuspend(&pdev->dev); + /* HS200 is broken at this moment */ + host->quirks2 = SDHCI_QUIRK2_BROKEN_HS200; + ret = sdhci_add_host(host); if (ret) goto pm_runtime_disable; -- cgit v1.2.3 From fbf0a7f44cdd4041b5a3e2b14deaa0adebaf40da Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Mon, 5 Aug 2019 12:54:01 +0200 Subject: drm/qxl: get vga ioports qxl has two modes: "native" (used by the drm driver) and "vga" (vga compatibility mode, typically used for boot display and firmware framebuffers). Accessing any vga ioport will switch the qxl device into vga mode. The qxl driver never does that, but other drivers accessing vga ports can trigger that too and therefore disturb qxl operation. So aquire the legacy vga ioports from vgaarb to avoid that. Reproducer: Boot kvm guest with both qxl and i915 vgpu, with qxl being first in pci scan order. v2: Skip this for secondary qxl cards which don't have vga mode in the first place (Frediano). Cc: Frediano Ziglio Signed-off-by: Gerd Hoffmann Reviewed-by: Dave Airlie Link: http://patchwork.freedesktop.org/patch/msgid/20190805105401.29874-1-kraxel@redhat.com --- drivers/gpu/drm/qxl/qxl_drv.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/qxl/qxl_drv.c b/drivers/gpu/drm/qxl/qxl_drv.c index f33e349c4ec5..952201c6d821 100644 --- a/drivers/gpu/drm/qxl/qxl_drv.c +++ b/drivers/gpu/drm/qxl/qxl_drv.c @@ -59,6 +59,11 @@ module_param_named(num_heads, qxl_num_crtc, int, 0400); static struct drm_driver qxl_driver; static struct pci_driver qxl_pci_driver; +static bool is_vga(struct pci_dev *pdev) +{ + return pdev->class == PCI_CLASS_DISPLAY_VGA << 8; +} + static int qxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -83,9 +88,17 @@ qxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (ret) goto disable_pci; + if (is_vga(pdev)) { + ret = vga_get_interruptible(pdev, VGA_RSRC_LEGACY_IO); + if (ret) { + DRM_ERROR("can't get legacy vga ioports\n"); + goto disable_pci; + } + } + ret = qxl_device_init(qdev, &qxl_driver, pdev); if (ret) - goto disable_pci; + goto put_vga; ret = qxl_modeset_init(qdev); if (ret) @@ -105,6 +118,9 @@ modeset_cleanup: qxl_modeset_fini(qdev); unload: qxl_device_fini(qdev); +put_vga: + if (is_vga(pdev)) + vga_put(pdev, VGA_RSRC_LEGACY_IO); disable_pci: pci_disable_device(pdev); free_dev: @@ -122,6 +138,8 @@ qxl_pci_remove(struct pci_dev *pdev) qxl_modeset_fini(qdev); qxl_device_fini(qdev); + if (is_vga(pdev)) + vga_put(pdev, VGA_RSRC_LEGACY_IO); dev->dev_private = NULL; kfree(qdev); -- cgit v1.2.3 From 8090f7eb318d4241625449252db2741e7703e027 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 21 Aug 2019 21:32:26 +0300 Subject: drm/omap: Fix port lookup for SDI output When refactoring port lookup for DSS outputs, commit d17eb4537a7e ("drm/omap: Factor out common init/cleanup code for output devices") incorrectly hardcoded usage of DT port 0. This breaks operation for SDI (which uses the DT port 1) and DPI outputs other than DPI0 (which are not used in mainline DT sources). Fix this by using the port number from the output omap_dss_device of_ports field. Fixes: d17eb4537a7e ("drm/omap: Factor out common init/cleanup code for output devices") Signed-off-by: Laurent Pinchart Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20190821183226.13784-1-laurent.pinchart@ideasonboard.com Tested-by: Aaro Koskinen --- drivers/gpu/drm/omapdrm/dss/output.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/omapdrm/dss/output.c b/drivers/gpu/drm/omapdrm/dss/output.c index de0f882f0f7b..14b41de44ebc 100644 --- a/drivers/gpu/drm/omapdrm/dss/output.c +++ b/drivers/gpu/drm/omapdrm/dss/output.c @@ -4,6 +4,7 @@ * Author: Archit Taneja */ +#include #include #include #include @@ -20,7 +21,8 @@ int omapdss_device_init_output(struct omap_dss_device *out) { struct device_node *remote_node; - remote_node = of_graph_get_remote_node(out->dev->of_node, 0, 0); + remote_node = of_graph_get_remote_node(out->dev->of_node, + ffs(out->of_ports) - 1, 0); if (!remote_node) { dev_dbg(out->dev, "failed to find video sink\n"); return 0; -- cgit v1.2.3 From 9b2a0a1ef66f96bf34921a3865581eca32ff05ec Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Wed, 21 Aug 2019 13:12:09 +0200 Subject: drm/virtio: use virtio_max_dma_size We must make sure our scatterlist segments are not too big, otherwise we might see swiotlb failures (happens with sev, also reproducable with swiotlb=force). Suggested-by: Laszlo Ersek Signed-off-by: Gerd Hoffmann Reviewed-by: Laszlo Ersek Link: http://patchwork.freedesktop.org/patch/msgid/20190821111210.27165-1-kraxel@redhat.com --- drivers/gpu/drm/virtio/virtgpu_object.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/virtio/virtgpu_object.c b/drivers/gpu/drm/virtio/virtgpu_object.c index b2da31310d24..09b526518f5a 100644 --- a/drivers/gpu/drm/virtio/virtgpu_object.c +++ b/drivers/gpu/drm/virtio/virtgpu_object.c @@ -204,6 +204,7 @@ int virtio_gpu_object_get_sg_table(struct virtio_gpu_device *qdev, .interruptible = false, .no_wait_gpu = false }; + size_t max_segment; /* wtf swapping */ if (bo->pages) @@ -215,8 +216,13 @@ int virtio_gpu_object_get_sg_table(struct virtio_gpu_device *qdev, if (!bo->pages) goto out; - ret = sg_alloc_table_from_pages(bo->pages, pages, nr_pages, 0, - nr_pages << PAGE_SHIFT, GFP_KERNEL); + max_segment = virtio_max_dma_size(qdev->vdev); + max_segment &= PAGE_MASK; + if (max_segment > SCATTERLIST_MAX_SEGMENT) + max_segment = SCATTERLIST_MAX_SEGMENT; + ret = __sg_alloc_table_from_pages(bo->pages, pages, nr_pages, 0, + nr_pages << PAGE_SHIFT, + max_segment, GFP_KERNEL); if (ret) goto out; return 0; -- cgit v1.2.3 From c51bc12d06b3a5494fbfcbd788a8e307932a06e9 Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Mon, 1 Jul 2019 18:50:11 +0100 Subject: ARM: 8874/1: mm: only adjust sections of valid mm structures A timing hazard exists when an early fork/exec thread begins exiting and sets its mm pointer to NULL while a separate core tries to update the section information. This commit ensures that the mm pointer is not NULL before setting its section parameters. The arguments provided by commit 11ce4b33aedc ("ARM: 8672/1: mm: remove tasklist locking from update_sections_early()") are equally valid for not requiring grabbing the task_lock around this check. Fixes: 08925c2f124f ("ARM: 8464/1: Update all mm structures with section adjustments") Signed-off-by: Doug Berger Acked-by: Laura Abbott Cc: Mike Rapoport Cc: Andrew Morton Cc: Florian Fainelli Cc: Rob Herring Cc: "Steven Rostedt (VMware)" Cc: Peng Fan Cc: Geert Uytterhoeven Signed-off-by: Russell King --- arch/arm/mm/init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 16d373d587c4..3a65ded832df 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -628,7 +628,8 @@ static void update_sections_early(struct section_perm perms[], int n) if (t->flags & PF_KTHREAD) continue; for_each_thread(t, s) - set_section_perms(perms, n, true, s->mm); + if (s->mm) + set_section_perms(perms, n, true, s->mm); } set_section_perms(perms, n, true, current->active_mm); set_section_perms(perms, n, true, &init_mm); -- cgit v1.2.3 From 69389837171140e2a94c5b8683c08dceaa8c9c8c Mon Sep 17 00:00:00 2001 From: Lvqiang Huang Date: Thu, 1 Aug 2019 08:15:23 +0100 Subject: ARM: 8897/1: check stmfd instruction using right shift In the commit ef41b5c92498 ("ARM: make kernel oops easier to read"), - .word 0xe92d0000 >> 10 @ stmfd sp!, {} + .word 0xe92d0000 >> 11 @ stmfd sp!, {} then the shift need to change to 11. Signed-off-by: Lvqiang Huang Signed-off-by: Chunyan Zhang Signed-off-by: Russell King --- arch/arm/lib/backtrace.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index 1d5210eb4776..582925238d65 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -66,7 +66,7 @@ for_each_frame: tst frame, mask @ Check for address exceptions 1003: ldr r2, [sv_pc, #-4] @ if stmfd sp!, {args} exists, ldr r3, .Ldsi+4 @ adjust saved 'pc' back one - teq r3, r2, lsr #10 @ instruction + teq r3, r2, lsr #11 @ instruction subne r0, sv_pc, #4 @ allow for mov subeq r0, sv_pc, #8 @ allow for mov + stmia -- cgit v1.2.3 From 8f6a79112a360ff05b8aa4a9be081d3eb9057077 Mon Sep 17 00:00:00 2001 From: "james qian wang (Arm Technology China)" Date: Mon, 19 Aug 2019 08:01:57 +0000 Subject: drm/komeda: Fix error: not allocating enough data 1592 vs 1584 The patch 5d51f6c0da1b: "drm/komeda: Add writeback support" from May 23, 2019, leads to the following static checker warning: drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c:151 komeda_wb_connector_add() error: not allocating enough data 1592 vs 1584 This is a typo which misuse "wb_conn" but which should be "kwb_conn" to allocate the memory. Reported-by: Dan Carpenter Signed-off-by: james qian wang (Arm Technology China) Reviewed-by: Ayan Kumar Halder Link: https://patchwork.freedesktop.org/patch/msgid/20190819080136.10190-1-james.qian.wang@arm.com --- drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c index 617e1f7b8472..2851cac94d86 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c +++ b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c @@ -148,7 +148,7 @@ static int komeda_wb_connector_add(struct komeda_kms_dev *kms, if (!kcrtc->master->wb_layer) return 0; - kwb_conn = kzalloc(sizeof(*wb_conn), GFP_KERNEL); + kwb_conn = kzalloc(sizeof(*kwb_conn), GFP_KERNEL); if (!kwb_conn) return -ENOMEM; -- cgit v1.2.3 From 61d05b184963523e50729af8466b72e9c8a4f8be Mon Sep 17 00:00:00 2001 From: "james qian wang (Arm Technology China)" Date: Mon, 12 Aug 2019 11:23:41 +0000 Subject: drm/komeda: Fix warning -Wunused-but-set-variable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixed two -Wunused-but-set-variable warnings: /arm/linux/display/aosp-4.14-drm-next/drivers/gpu/drm/arm/display/komeda/komeda_kms.c: In function ‘komeda_crtc_normalize_zpos’: /arm/linux/display/aosp-4.14-drm-next/drivers/gpu/drm/arm/display/komeda/komeda_kms.c:150:26: warning: variable ‘fb’ set but not used [-Wunused-but-set-variable] struct drm_framebuffer *fb; ^~ /arm/linux/display/aosp-4.14-drm-next/drivers/gpu/drm/arm/display/komeda/komeda_kms.c: In function ‘komeda_kms_check’: /arm/linux/display/aosp-4.14-drm-next/drivers/gpu/drm/arm/display/komeda/komeda_kms.c:209:25: warning: variable ‘old_crtc_st’ set but not used [-Wunused-but-set-variable] struct drm_crtc_state *old_crtc_st, *new_crtc_st; ^~~~~~~~~~~ Signed-off-by: james qian wang (Arm Technology China) Reviewed-by: Ayan Kumar Halder Link: https://patchwork.freedesktop.org/patch/msgid/20190812112322.15990-1-james.qian.wang@arm.com --- drivers/gpu/drm/arm/display/komeda/komeda_kms.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_kms.c b/drivers/gpu/drm/arm/display/komeda/komeda_kms.c index d50e75f0b2bd..1f0e3f4e8d74 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_kms.c +++ b/drivers/gpu/drm/arm/display/komeda/komeda_kms.c @@ -147,7 +147,6 @@ static int komeda_crtc_normalize_zpos(struct drm_crtc *crtc, struct komeda_crtc_state *kcrtc_st = to_kcrtc_st(crtc_st); struct komeda_plane_state *kplane_st; struct drm_plane_state *plane_st; - struct drm_framebuffer *fb; struct drm_plane *plane; struct list_head zorder_list; int order = 0, err; @@ -173,7 +172,6 @@ static int komeda_crtc_normalize_zpos(struct drm_crtc *crtc, list_for_each_entry(kplane_st, &zorder_list, zlist_node) { plane_st = &kplane_st->base; - fb = plane_st->fb; plane = plane_st->plane; plane_st->normalized_zpos = order++; @@ -206,7 +204,7 @@ static int komeda_kms_check(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_crtc *crtc; - struct drm_crtc_state *old_crtc_st, *new_crtc_st; + struct drm_crtc_state *new_crtc_st; int i, err; err = drm_atomic_helper_check_modeset(dev, state); @@ -217,7 +215,7 @@ static int komeda_kms_check(struct drm_device *dev, * so need to add all affected_planes (even unchanged) to * drm_atomic_state. */ - for_each_oldnew_crtc_in_state(state, crtc, old_crtc_st, new_crtc_st, i) { + for_each_new_crtc_in_state(state, crtc, new_crtc_st, i) { err = drm_atomic_add_affected_planes(state, crtc); if (err) return err; -- cgit v1.2.3 From 95abcd33ad513faf9cf3f54a28fb4982407e5a92 Mon Sep 17 00:00:00 2001 From: "james qian wang (Arm Technology China)" Date: Tue, 13 Aug 2019 11:08:20 +0000 Subject: drm/komeda: Clean warning 'komeda_component_add' might be a candidate for 'gnu_printf' komeda/komeda_pipeline.c: In function 'komeda_component_add': komeda/komeda_pipeline.c:212:3: warning: function 'komeda_component_add' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format] vsnprintf(c->name, sizeof(c->name), name_fmt, args); ^~~~~~~~~ Signed-off-by: james qian wang (Arm Technology China) Reviewed-by: Ayan Kumar Halder Link: https://patchwork.freedesktop.org/patch/msgid/20190813110759.10425-1-james.qian.wang@arm.com --- drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h index a90bcbb3cb23..14b683164544 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h +++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h @@ -480,6 +480,7 @@ void komeda_pipeline_dump_register(struct komeda_pipeline *pipe, struct seq_file *sf); /* component APIs */ +extern __printf(10, 11) struct komeda_component * komeda_component_add(struct komeda_pipeline *pipe, size_t comp_sz, u32 id, u32 hw_id, -- cgit v1.2.3 From 51a44a28eefd0d4c1addeb23fc5a599ff1787dfd Mon Sep 17 00:00:00 2001 From: Mihail Atanassov Date: Tue, 20 Aug 2019 15:16:58 +0000 Subject: drm/komeda: Add missing of_node_get() call komeda_pipeline_destroy has the matching of_node_put(). Fixes: 29e56aec911dd ("drm/komeda: Add DT parsing") Signed-off-by: Mihail Atanassov Reviewed-by: Ayan Kumar Halder [Rebased on the latest drm-misc-fixes] Signed-off-by: Ayan Kumar Halder Link: https://patchwork.freedesktop.org/patch/325278/ Change-Id: I5fa2479d6cb3a77182f1a92833c1c0bca8668cb4 --- drivers/gpu/drm/arm/display/komeda/komeda_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_dev.c b/drivers/gpu/drm/arm/display/komeda/komeda_dev.c index a0eabc134dd6..9d4d5075cc64 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_dev.c +++ b/drivers/gpu/drm/arm/display/komeda/komeda_dev.c @@ -127,7 +127,7 @@ static int komeda_parse_pipe_dt(struct komeda_dev *mdev, struct device_node *np) pipe->of_output_port = of_graph_get_port_by_id(np, KOMEDA_OF_PORT_OUTPUT); - pipe->of_node = np; + pipe->of_node = of_node_get(np); return 0; } -- cgit v1.2.3 From a15d56a60760aa9dbe26343b9a0ac5228f35d445 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Thu, 22 Aug 2019 08:55:36 +0200 Subject: batman-adv: Only read OGM tvlv_len after buffer len check Multiple batadv_ogm_packet can be stored in an skbuff. The functions batadv_iv_ogm_send_to_if()/batadv_iv_ogm_receive() use batadv_iv_ogm_aggr_packet() to check if there is another additional batadv_ogm_packet in the skb or not before they continue processing the packet. The length for such an OGM is BATADV_OGM_HLEN + batadv_ogm_packet->tvlv_len. The check must first check that at least BATADV_OGM_HLEN bytes are available before it accesses tvlv_len (which is part of the header. Otherwise it might try read outside of the currently available skbuff to get the content of tvlv_len. Fixes: ef26157747d4 ("batman-adv: tvlv - basic infrastructure") Reported-by: syzbot+355cab184197dbbfa384@syzkaller.appspotmail.com Signed-off-by: Sven Eckelmann Acked-by: Antonio Quartulli Signed-off-by: Simon Wunderlich --- net/batman-adv/bat_iv_ogm.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index 240ed70912d6..d78938e3e008 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -277,17 +277,23 @@ static u8 batadv_hop_penalty(u8 tq, const struct batadv_priv *bat_priv) * batadv_iv_ogm_aggr_packet() - checks if there is another OGM attached * @buff_pos: current position in the skb * @packet_len: total length of the skb - * @tvlv_len: tvlv length of the previously considered OGM + * @ogm_packet: potential OGM in buffer * * Return: true if there is enough space for another OGM, false otherwise. */ -static bool batadv_iv_ogm_aggr_packet(int buff_pos, int packet_len, - __be16 tvlv_len) +static bool +batadv_iv_ogm_aggr_packet(int buff_pos, int packet_len, + const struct batadv_ogm_packet *ogm_packet) { int next_buff_pos = 0; - next_buff_pos += buff_pos + BATADV_OGM_HLEN; - next_buff_pos += ntohs(tvlv_len); + /* check if there is enough space for the header */ + next_buff_pos += buff_pos + sizeof(*ogm_packet); + if (next_buff_pos > packet_len) + return false; + + /* check if there is enough space for the optional TVLV */ + next_buff_pos += ntohs(ogm_packet->tvlv_len); return (next_buff_pos <= packet_len) && (next_buff_pos <= BATADV_MAX_AGGREGATION_BYTES); @@ -315,7 +321,7 @@ static void batadv_iv_ogm_send_to_if(struct batadv_forw_packet *forw_packet, /* adjust all flags and log packets */ while (batadv_iv_ogm_aggr_packet(buff_pos, forw_packet->packet_len, - batadv_ogm_packet->tvlv_len)) { + batadv_ogm_packet)) { /* we might have aggregated direct link packets with an * ordinary base packet */ @@ -1704,7 +1710,7 @@ static int batadv_iv_ogm_receive(struct sk_buff *skb, /* unpack the aggregated packets and process them one by one */ while (batadv_iv_ogm_aggr_packet(ogm_offset, skb_headlen(skb), - ogm_packet->tvlv_len)) { + ogm_packet)) { batadv_iv_ogm_process(skb, ogm_offset, if_incoming); ogm_offset += BATADV_OGM_HLEN; -- cgit v1.2.3 From 0ff0f15a32c093381ad1abc06abe85afb561ab28 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Thu, 22 Aug 2019 08:55:36 +0200 Subject: batman-adv: Only read OGM2 tvlv_len after buffer len check Multiple batadv_ogm2_packet can be stored in an skbuff. The functions batadv_v_ogm_send_to_if() uses batadv_v_ogm_aggr_packet() to check if there is another additional batadv_ogm2_packet in the skb or not before they continue processing the packet. The length for such an OGM2 is BATADV_OGM2_HLEN + batadv_ogm2_packet->tvlv_len. The check must first check that at least BATADV_OGM2_HLEN bytes are available before it accesses tvlv_len (which is part of the header. Otherwise it might try read outside of the currently available skbuff to get the content of tvlv_len. Fixes: 9323158ef9f4 ("batman-adv: OGMv2 - implement originators logic") Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/bat_v_ogm.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/net/batman-adv/bat_v_ogm.c b/net/batman-adv/bat_v_ogm.c index fad95ef64e01..bc06e3cdfa84 100644 --- a/net/batman-adv/bat_v_ogm.c +++ b/net/batman-adv/bat_v_ogm.c @@ -631,17 +631,23 @@ batadv_v_ogm_process_per_outif(struct batadv_priv *bat_priv, * batadv_v_ogm_aggr_packet() - checks if there is another OGM aggregated * @buff_pos: current position in the skb * @packet_len: total length of the skb - * @tvlv_len: tvlv length of the previously considered OGM + * @ogm2_packet: potential OGM2 in buffer * * Return: true if there is enough space for another OGM, false otherwise. */ -static bool batadv_v_ogm_aggr_packet(int buff_pos, int packet_len, - __be16 tvlv_len) +static bool +batadv_v_ogm_aggr_packet(int buff_pos, int packet_len, + const struct batadv_ogm2_packet *ogm2_packet) { int next_buff_pos = 0; - next_buff_pos += buff_pos + BATADV_OGM2_HLEN; - next_buff_pos += ntohs(tvlv_len); + /* check if there is enough space for the header */ + next_buff_pos += buff_pos + sizeof(*ogm2_packet); + if (next_buff_pos > packet_len) + return false; + + /* check if there is enough space for the optional TVLV */ + next_buff_pos += ntohs(ogm2_packet->tvlv_len); return (next_buff_pos <= packet_len) && (next_buff_pos <= BATADV_MAX_AGGREGATION_BYTES); @@ -818,7 +824,7 @@ int batadv_v_ogm_packet_recv(struct sk_buff *skb, ogm_packet = (struct batadv_ogm2_packet *)skb->data; while (batadv_v_ogm_aggr_packet(ogm_offset, skb_headlen(skb), - ogm_packet->tvlv_len)) { + ogm_packet)) { batadv_v_ogm_process(skb, ogm_offset, if_incoming); ogm_offset += BATADV_OGM2_HLEN; -- cgit v1.2.3 From 3e5bedc2c258341702ddffbd7688c5e6eb01eafa Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 21 Aug 2019 15:16:31 +0200 Subject: x86/apic: Fix arch_dynirq_lower_bound() bug for DT enabled machines Rahul Tanwar reported the following bug on DT systems: > 'ioapic_dynirq_base' contains the virtual IRQ base number. Presently, it is > updated to the end of hardware IRQ numbers but this is done only when IOAPIC > configuration type is IOAPIC_DOMAIN_LEGACY or IOAPIC_DOMAIN_STRICT. There is > a third type IOAPIC_DOMAIN_DYNAMIC which applies when IOAPIC configuration > comes from devicetree. > > See dtb_add_ioapic() in arch/x86/kernel/devicetree.c > > In case of IOAPIC_DOMAIN_DYNAMIC (DT/OF based system), 'ioapic_dynirq_base' > remains to zero initialized value. This means that for OF based systems, > virtual IRQ base will get set to zero. Such systems will very likely not even boot. For DT enabled machines ioapic_dynirq_base is irrelevant and not updated, so simply map the IRQ base 1:1 instead. Reported-by: Rahul Tanwar Tested-by: Rahul Tanwar Tested-by: Andy Shevchenko Signed-off-by: Thomas Gleixner Cc: Alexander Shishkin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: alan@linux.intel.com Cc: bp@alien8.de Cc: cheol.yong.kim@intel.com Cc: qi-ming.wu@intel.com Cc: rahul.tanwar@intel.com Cc: rppt@linux.ibm.com Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/20190821081330.1187-1-rahul.tanwar@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index c7bb6c69f21c..d6af97fd170a 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2438,7 +2438,13 @@ unsigned int arch_dynirq_lower_bound(unsigned int from) * dmar_alloc_hwirq() may be called before setup_IO_APIC(), so use * gsi_top if ioapic_dynirq_base hasn't been initialized yet. */ - return ioapic_initialized ? ioapic_dynirq_base : gsi_top; + if (!ioapic_initialized) + return gsi_top; + /* + * For DT enabled machines ioapic_dynirq_base is irrelevant and not + * updated. So simply return @from if ioapic_dynirq_base == 0. + */ + return ioapic_dynirq_base ? : from; } #ifdef CONFIG_X86_32 -- cgit v1.2.3 From 9212ec7d8357ea630031e89d0d399c761421c83b Mon Sep 17 00:00:00 2001 From: Sebastian Mayr Date: Sun, 28 Jul 2019 17:26:17 +0200 Subject: uprobes/x86: Fix detection of 32-bit user mode 32-bit processes running on a 64-bit kernel are not always detected correctly, causing the process to crash when uretprobes are installed. The reason for the crash is that in_ia32_syscall() is used to determine the process's mode, which only works correctly when called from a syscall. In the case of uretprobes, however, the function is called from a exception and always returns 'false' on a 64-bit kernel. In consequence this leads to corruption of the process's return address. Fix this by using user_64bit_mode() instead of in_ia32_syscall(), which is correct in any situation. [ tglx: Add a comment and the following historical info ] This should have been detected by the rename which happened in commit abfb9498ee13 ("x86/entry: Rename is_{ia32,x32}_task() to in_{ia32,x32}_syscall()") which states in the changelog: The is_ia32_task()/is_x32_task() function names are a big misnomer: they suggests that the compat-ness of a system call is a task property, which is not true, the compatness of a system call purely depends on how it was invoked through the system call layer. ..... and then it went and blindly renamed every call site. Sadly enough this was already mentioned here: 8faaed1b9f50 ("uprobes/x86: Introduce sizeof_long(), cleanup adjust_ret_addr() and arch_uretprobe_hijack_return_addr()") where the changelog says: TODO: is_ia32_task() is not what we actually want, TS_COMPAT does not necessarily mean 32bit. Fortunately syscall-like insns can't be probed so it actually works, but it would be better to rename and use is_ia32_frame(). and goes all the way back to: 0326f5a94dde ("uprobes/core: Handle breakpoint and singlestep exceptions") Oh well. 7+ years until someone actually tried a uretprobe on a 32bit process on a 64bit kernel.... Fixes: 0326f5a94dde ("uprobes/core: Handle breakpoint and singlestep exceptions") Signed-off-by: Sebastian Mayr Signed-off-by: Thomas Gleixner Cc: Masami Hiramatsu Cc: Dmitry Safonov Cc: Oleg Nesterov Cc: Srikar Dronamraju Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190728152617.7308-1-me@sam.st --- arch/x86/kernel/uprobes.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c index d8359ebeea70..8cd745ef8c7b 100644 --- a/arch/x86/kernel/uprobes.c +++ b/arch/x86/kernel/uprobes.c @@ -508,9 +508,12 @@ struct uprobe_xol_ops { void (*abort)(struct arch_uprobe *, struct pt_regs *); }; -static inline int sizeof_long(void) +static inline int sizeof_long(struct pt_regs *regs) { - return in_ia32_syscall() ? 4 : 8; + /* + * Check registers for mode as in_xxx_syscall() does not apply here. + */ + return user_64bit_mode(regs) ? 8 : 4; } static int default_pre_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs) @@ -521,9 +524,9 @@ static int default_pre_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs) static int emulate_push_stack(struct pt_regs *regs, unsigned long val) { - unsigned long new_sp = regs->sp - sizeof_long(); + unsigned long new_sp = regs->sp - sizeof_long(regs); - if (copy_to_user((void __user *)new_sp, &val, sizeof_long())) + if (copy_to_user((void __user *)new_sp, &val, sizeof_long(regs))) return -EFAULT; regs->sp = new_sp; @@ -556,7 +559,7 @@ static int default_post_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs long correction = utask->vaddr - utask->xol_vaddr; regs->ip += correction; } else if (auprobe->defparam.fixups & UPROBE_FIX_CALL) { - regs->sp += sizeof_long(); /* Pop incorrect return address */ + regs->sp += sizeof_long(regs); /* Pop incorrect return address */ if (emulate_push_stack(regs, utask->vaddr + auprobe->defparam.ilen)) return -ERESTART; } @@ -675,7 +678,7 @@ static int branch_post_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs) * "call" insn was executed out-of-line. Just restore ->sp and restart. * We could also restore ->ip and try to call branch_emulate_op() again. */ - regs->sp += sizeof_long(); + regs->sp += sizeof_long(regs); return -ERESTART; } @@ -1056,7 +1059,7 @@ bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs) unsigned long arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs *regs) { - int rasize = sizeof_long(), nleft; + int rasize = sizeof_long(regs), nleft; unsigned long orig_ret_vaddr = 0; /* clear high bits for 32-bit apps */ if (copy_from_user(&orig_ret_vaddr, (void __user *)regs->sp, rasize)) -- cgit v1.2.3 From bae3a8d3308ee69a7dbdf145911b18dfda8ade0d Mon Sep 17 00:00:00 2001 From: Bandan Das Date: Mon, 26 Aug 2019 06:15:12 -0400 Subject: x86/apic: Do not initialize LDR and DFR for bigsmp Legacy apic init uses bigsmp for smp systems with 8 and more CPUs. The bigsmp APIC implementation uses physical destination mode, but it nevertheless initializes LDR and DFR. The LDR even ends up incorrectly with multiple bit being set. This does not cause a functional problem because LDR and DFR are ignored when physical destination mode is active, but it triggered a problem on a 32-bit KVM guest which jumps into a kdump kernel. The multiple bits set unearthed a bug in the KVM APIC implementation. The code which creates the logical destination map for VCPUs ignores the disabled state of the APIC and ends up overwriting an existing valid entry and as a result, APIC calibration hangs in the guest during kdump initialization. Remove the bogus LDR/DFR initialization. This is not intended to work around the KVM APIC bug. The LDR/DFR ininitalization is wrong on its own. The issue goes back into the pre git history. The fixes tag is the commit in the bitkeeper import which introduced bigsmp support in 2003. git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Fixes: db7b9e9f26b8 ("[PATCH] Clustered APIC setup for >8 CPU systems") Suggested-by: Thomas Gleixner Signed-off-by: Bandan Das Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190826101513.5080-2-bsd@redhat.com --- arch/x86/kernel/apic/bigsmp_32.c | 24 ++---------------------- 1 file changed, 2 insertions(+), 22 deletions(-) diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c index afee386ff711..caedd8d60d36 100644 --- a/arch/x86/kernel/apic/bigsmp_32.c +++ b/arch/x86/kernel/apic/bigsmp_32.c @@ -38,32 +38,12 @@ static int bigsmp_early_logical_apicid(int cpu) return early_per_cpu(x86_cpu_to_apicid, cpu); } -static inline unsigned long calculate_ldr(int cpu) -{ - unsigned long val, id; - - val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; - id = per_cpu(x86_bios_cpu_apicid, cpu); - val |= SET_APIC_LOGICAL_ID(id); - - return val; -} - /* - * Set up the logical destination ID. - * - * Intel recommends to set DFR, LDR and TPR before enabling - * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel - * document number 292116). So here it goes... + * bigsmp enables physical destination mode + * and doesn't use LDR and DFR */ static void bigsmp_init_apic_ldr(void) { - unsigned long val; - int cpu = smp_processor_id(); - - apic_write(APIC_DFR, APIC_DFR_FLAT); - val = calculate_ldr(cpu); - apic_write(APIC_LDR, val); } static void bigsmp_setup_apic_routing(void) -- cgit v1.2.3 From 558682b5291937a70748d36fd9ba757fb25b99ae Mon Sep 17 00:00:00 2001 From: Bandan Das Date: Mon, 26 Aug 2019 06:15:13 -0400 Subject: x86/apic: Include the LDR when clearing out APIC registers Although APIC initialization will typically clear out the LDR before setting it, the APIC cleanup code should reset the LDR. This was discovered with a 32-bit KVM guest jumping into a kdump kernel. The stale bits in the LDR triggered a bug in the KVM APIC implementation which caused the destination mapping for VCPUs to be corrupted. Note that this isn't intended to paper over the KVM APIC bug. The kernel has to clear the LDR when resetting the APIC registers except when X2APIC is enabled. This lacks a Fixes tag because missing to clear LDR goes way back into pre git history. [ tglx: Made x2apic_enabled a function call as required ] Signed-off-by: Bandan Das Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190826101513.5080-3-bsd@redhat.com --- arch/x86/kernel/apic/apic.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index aa5495d0f478..dba2828b779a 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1179,6 +1179,10 @@ void clear_local_APIC(void) apic_write(APIC_LVT0, v | APIC_LVT_MASKED); v = apic_read(APIC_LVT1); apic_write(APIC_LVT1, v | APIC_LVT_MASKED); + if (!x2apic_enabled()) { + v = apic_read(APIC_LDR) & ~APIC_LDR_MASK; + apic_write(APIC_LDR, v); + } if (maxlvt >= 4) { v = apic_read(APIC_LVTPC); apic_write(APIC_LVTPC, v | APIC_LVT_MASKED); -- cgit v1.2.3 From 42068e1ef961c719f967dbbb4ddcb394a0ba7917 Mon Sep 17 00:00:00 2001 From: Christian König Date: Fri, 16 Aug 2019 14:56:35 +0200 Subject: drm/amdgpu: fix dma_fence_wait without reference MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We need to grab a reference to the fence we wait for. Signed-off-by: Christian König Reviewed-by: Chunming Zhou Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c index f539a2a92774..7398b4850649 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c @@ -534,21 +534,24 @@ int amdgpu_ctx_wait_prev_fence(struct amdgpu_ctx *ctx, struct drm_sched_entity *entity) { struct amdgpu_ctx_entity *centity = to_amdgpu_ctx_entity(entity); - unsigned idx = centity->sequence & (amdgpu_sched_jobs - 1); - struct dma_fence *other = centity->fences[idx]; + struct dma_fence *other; + unsigned idx; + long r; - if (other) { - signed long r; - r = dma_fence_wait(other, true); - if (r < 0) { - if (r != -ERESTARTSYS) - DRM_ERROR("Error (%ld) waiting for fence!\n", r); + spin_lock(&ctx->ring_lock); + idx = centity->sequence & (amdgpu_sched_jobs - 1); + other = dma_fence_get(centity->fences[idx]); + spin_unlock(&ctx->ring_lock); - return r; - } - } + if (!other) + return 0; - return 0; + r = dma_fence_wait(other, true); + if (r < 0 && r != -ERESTARTSYS) + DRM_ERROR("Error (%ld) waiting for fence!\n", r); + + dma_fence_put(other); + return r; } void amdgpu_ctx_mgr_init(struct amdgpu_ctx_mgr *mgr) -- cgit v1.2.3 From 86c28b2d69f93a218a9a5cef146ed0097a98687f Mon Sep 17 00:00:00 2001 From: Jiong Wang Date: Fri, 23 Aug 2019 19:00:28 -0700 Subject: nfp: bpf: fix latency bug when updating stack index register NFP is using Local Memory to model stack. LM_addr could be used as base of a 16 32-bit word region of Local Memory. Then, if the stack offset is beyond the current region, the local index needs to be updated. The update needs at least three cycles to take effect, therefore the sequence normally looks like: local_csr_wr[ActLMAddr3, gprB_5] nop nop nop If the local index switch happens on a narrow loads, then the instruction preparing value to zero high 32-bit of the destination register could be counted as one cycle, the sequence then could be something like: local_csr_wr[ActLMAddr3, gprB_5] nop nop immed[gprB_5, 0] However, we have zero extension optimization that zeroing high 32-bit could be eliminated, therefore above IMMED insn won't be available for which case the first sequence needs to be generated. Fixes: 0b4de1ff19bf ("nfp: bpf: eliminate zero extension code-gen") Signed-off-by: Jiong Wang Reviewed-by: Jakub Kicinski Signed-off-by: Jakub Kicinski Signed-off-by: Daniel Borkmann --- drivers/net/ethernet/netronome/nfp/bpf/jit.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/netronome/nfp/bpf/jit.c b/drivers/net/ethernet/netronome/nfp/bpf/jit.c index 4054b70d7719..5afcb3c4c2ef 100644 --- a/drivers/net/ethernet/netronome/nfp/bpf/jit.c +++ b/drivers/net/ethernet/netronome/nfp/bpf/jit.c @@ -1163,7 +1163,7 @@ mem_op_stack(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta, bool clr_gpr, lmem_step step) { s32 off = nfp_prog->stack_frame_depth + meta->insn.off + ptr_off; - bool first = true, last; + bool first = true, narrow_ld, last; bool needs_inc = false; swreg stack_off_reg; u8 prev_gpr = 255; @@ -1209,13 +1209,22 @@ mem_op_stack(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta, needs_inc = true; } + + narrow_ld = clr_gpr && size < 8; + if (lm3) { + unsigned int nop_cnt; + emit_csr_wr(nfp_prog, imm_b(nfp_prog), NFP_CSR_ACT_LM_ADDR3); - /* For size < 4 one slot will be filled by zeroing of upper. */ - wrp_nops(nfp_prog, clr_gpr && size < 8 ? 2 : 3); + /* For size < 4 one slot will be filled by zeroing of upper, + * but be careful, that zeroing could be eliminated by zext + * optimization. + */ + nop_cnt = narrow_ld && meta->flags & FLAG_INSN_DO_ZEXT ? 2 : 3; + wrp_nops(nfp_prog, nop_cnt); } - if (clr_gpr && size < 8) + if (narrow_ld) wrp_zext(nfp_prog, meta, gpr); while (size) { -- cgit v1.2.3 From ede7c460b1da5be7b8ef4efe47f1687babf06408 Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Thu, 22 Aug 2019 00:53:58 +0530 Subject: bpf: handle 32-bit zext during constant blinding Since BPF constant blinding is performed after the verifier pass, the ALU32 instructions inserted for doubleword immediate loads don't have a corresponding zext instruction. This is causing a kernel oops on powerpc and can be reproduced by running 'test_cgroup_storage' with bpf_jit_harden=2. Fix this by emitting BPF_ZEXT during constant blinding if prog->aux->verifier_zext is set. Fixes: a4b1d3c1ddf6cb ("bpf: verifier: insert zero extension according to analysis result") Reported-by: Michael Ellerman Signed-off-by: Naveen N. Rao Reviewed-by: Jiong Wang Signed-off-by: Daniel Borkmann --- kernel/bpf/core.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index 8191a7db2777..66088a9e9b9e 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -890,7 +890,8 @@ int bpf_jit_get_func_addr(const struct bpf_prog *prog, static int bpf_jit_blind_insn(const struct bpf_insn *from, const struct bpf_insn *aux, - struct bpf_insn *to_buff) + struct bpf_insn *to_buff, + bool emit_zext) { struct bpf_insn *to = to_buff; u32 imm_rnd = get_random_int(); @@ -1005,6 +1006,8 @@ static int bpf_jit_blind_insn(const struct bpf_insn *from, case 0: /* Part 2 of BPF_LD | BPF_IMM | BPF_DW. */ *to++ = BPF_ALU32_IMM(BPF_MOV, BPF_REG_AX, imm_rnd ^ aux[0].imm); *to++ = BPF_ALU32_IMM(BPF_XOR, BPF_REG_AX, imm_rnd); + if (emit_zext) + *to++ = BPF_ZEXT_REG(BPF_REG_AX); *to++ = BPF_ALU64_REG(BPF_OR, aux[0].dst_reg, BPF_REG_AX); break; @@ -1088,7 +1091,8 @@ struct bpf_prog *bpf_jit_blind_constants(struct bpf_prog *prog) insn[1].code == 0) memcpy(aux, insn, sizeof(aux)); - rewritten = bpf_jit_blind_insn(insn, aux, insn_buff); + rewritten = bpf_jit_blind_insn(insn, aux, insn_buff, + clone->aux->verifier_zext); if (!rewritten) continue; -- cgit v1.2.3 From 21649c0b6b7899f4fa3099c46d3d027f60b107ec Mon Sep 17 00:00:00 2001 From: Kent Russell Date: Thu, 22 Aug 2019 08:17:40 -0400 Subject: drm/powerplay: Fix Vega20 Average Power value v4 The SMU changed reading from CurrSocketPower to AverageSocketPower, so reflect this accordingly. This fixes the issue where Average Power Consumption was being reported as 0 from SMU 40.46-onward v2: Fixed headline prefix v3: Add check for SMU version for proper compatibility v4: Style fix Signed-off-by: Kent Russell Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 5 ++++- drivers/gpu/drm/amd/powerplay/vega20_ppt.c | 10 +++++++++- 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c index f27c6fbb192e..e9de1c0a3b87 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c @@ -2101,7 +2101,10 @@ static int vega20_get_gpu_power(struct pp_hwmgr *hwmgr, if (ret) return ret; - *query = metrics_table.CurrSocketPower << 8; + if (hwmgr->smu_version < 0x282e00) + *query = metrics_table.CurrSocketPower << 8; + else + *query = metrics_table.AverageSocketPower << 8; return ret; } diff --git a/drivers/gpu/drm/amd/powerplay/vega20_ppt.c b/drivers/gpu/drm/amd/powerplay/vega20_ppt.c index dd6fd1c8bf24..29b64ee53c29 100644 --- a/drivers/gpu/drm/amd/powerplay/vega20_ppt.c +++ b/drivers/gpu/drm/amd/powerplay/vega20_ppt.c @@ -3050,6 +3050,7 @@ static int vega20_get_fan_speed_percent(struct smu_context *smu, static int vega20_get_gpu_power(struct smu_context *smu, uint32_t *value) { + uint32_t smu_version; int ret = 0; SmuMetrics_t metrics; @@ -3060,7 +3061,14 @@ static int vega20_get_gpu_power(struct smu_context *smu, uint32_t *value) if (ret) return ret; - *value = metrics.CurrSocketPower << 8; + ret = smu_get_smc_version(smu, NULL, &smu_version); + if (ret) + return ret; + + if (smu_version < 0x282e00) + *value = metrics.CurrSocketPower << 8; + else + *value = metrics.AverageSocketPower << 8; return 0; } -- cgit v1.2.3 From 23b7f6c41d4717b1638eca47e09d7e99fc7b9fd9 Mon Sep 17 00:00:00 2001 From: Kent Russell Date: Fri, 23 Aug 2019 09:13:18 -0400 Subject: drm/powerplay: Fix Vega20 power reading again For the 40.46 SMU release, they changed CurrSocketPower to AverageSocketPower, but this was changed back in 40.47 so just check if it's 40.46 and make the appropriate change Tested with 40.45, 40.46 and 40.47 successfully Signed-off-by: Kent Russell Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 7 ++++--- drivers/gpu/drm/amd/powerplay/vega20_ppt.c | 7 ++++--- 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c index e9de1c0a3b87..81658dc8fafc 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c @@ -2101,10 +2101,11 @@ static int vega20_get_gpu_power(struct pp_hwmgr *hwmgr, if (ret) return ret; - if (hwmgr->smu_version < 0x282e00) - *query = metrics_table.CurrSocketPower << 8; - else + /* For the 40.46 release, they changed the value name */ + if (hwmgr->smu_version == 0x282e00) *query = metrics_table.AverageSocketPower << 8; + else + *query = metrics_table.CurrSocketPower << 8; return ret; } diff --git a/drivers/gpu/drm/amd/powerplay/vega20_ppt.c b/drivers/gpu/drm/amd/powerplay/vega20_ppt.c index 29b64ee53c29..6a14497257e4 100644 --- a/drivers/gpu/drm/amd/powerplay/vega20_ppt.c +++ b/drivers/gpu/drm/amd/powerplay/vega20_ppt.c @@ -3065,10 +3065,11 @@ static int vega20_get_gpu_power(struct smu_context *smu, uint32_t *value) if (ret) return ret; - if (smu_version < 0x282e00) - *value = metrics.CurrSocketPower << 8; - else + /* For the 40.46 release, they changed the value name */ + if (smu_version == 0x282e00) *value = metrics.AverageSocketPower << 8; + else + *value = metrics.CurrSocketPower << 8; return 0; } -- cgit v1.2.3 From ddfd151f3def9258397fcde7a372205a2d661903 Mon Sep 17 00:00:00 2001 From: Alexey Kardashevskiy Date: Mon, 26 Aug 2019 14:55:20 +1000 Subject: KVM: PPC: Book3S: Fix incorrect guest-to-user-translation error handling H_PUT_TCE_INDIRECT handlers receive a page with up to 512 TCEs from a guest. Although we verify correctness of TCEs before we do anything with the existing tables, there is a small window when a check in kvmppc_tce_validate might pass and right after that the guest alters the page of TCEs, causing an early exit from the handler and leaving srcu_read_lock(&vcpu->kvm->srcu) (virtual mode) or lock_rmap(rmap) (real mode) locked. This fixes the bug by jumping to the common exit code with an appropriate unlock. Cc: stable@vger.kernel.org # v4.11+ Fixes: 121f80ba68f1 ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO") Signed-off-by: Alexey Kardashevskiy Signed-off-by: Paul Mackerras --- arch/powerpc/kvm/book3s_64_vio.c | 6 ++++-- arch/powerpc/kvm/book3s_64_vio_hv.c | 6 ++++-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kvm/book3s_64_vio.c b/arch/powerpc/kvm/book3s_64_vio.c index e99a14798ab0..c4b606fe73eb 100644 --- a/arch/powerpc/kvm/book3s_64_vio.c +++ b/arch/powerpc/kvm/book3s_64_vio.c @@ -660,8 +660,10 @@ long kvmppc_h_put_tce_indirect(struct kvm_vcpu *vcpu, } tce = be64_to_cpu(tce); - if (kvmppc_tce_to_ua(vcpu->kvm, tce, &ua)) - return H_PARAMETER; + if (kvmppc_tce_to_ua(vcpu->kvm, tce, &ua)) { + ret = H_PARAMETER; + goto unlock_exit; + } list_for_each_entry_lockless(stit, &stt->iommu_tables, next) { ret = kvmppc_tce_iommu_map(vcpu->kvm, stt, diff --git a/arch/powerpc/kvm/book3s_64_vio_hv.c b/arch/powerpc/kvm/book3s_64_vio_hv.c index f50bbeedfc66..b4f20f13b860 100644 --- a/arch/powerpc/kvm/book3s_64_vio_hv.c +++ b/arch/powerpc/kvm/book3s_64_vio_hv.c @@ -556,8 +556,10 @@ long kvmppc_rm_h_put_tce_indirect(struct kvm_vcpu *vcpu, unsigned long tce = be64_to_cpu(((u64 *)tces)[i]); ua = 0; - if (kvmppc_rm_tce_to_ua(vcpu->kvm, tce, &ua, NULL)) - return H_PARAMETER; + if (kvmppc_rm_tce_to_ua(vcpu->kvm, tce, &ua, NULL)) { + ret = H_PARAMETER; + goto unlock_exit; + } list_for_each_entry_lockless(stit, &stt->iommu_tables, next) { ret = kvmppc_rm_tce_iommu_map(vcpu->kvm, stt, -- cgit v1.2.3 From ed5fa90660d63bcec4c3a62b03fed9427418b53d Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 20 Aug 2019 19:16:57 +0300 Subject: drm/i915: Do not create a new max_bpc prop for MST connectors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We're not allowed to create new properties after device registration so for MST connectors we need to either create the max_bpc property earlier, or we reuse one we already have. Let's do the latter apporach since the corresponding SST connector already has the prop and its min/max are correct also for the MST connector. The problem was highlighted by commit 4f5368b5541a ("drm/kms: Catch mode_object lifetime errors") which results in the following spew: [ 1330.878941] WARNING: CPU: 2 PID: 1554 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xa0/0xb0 [drm] ... [ 1330.879008] Call Trace: [ 1330.879023] drm_property_create+0xba/0x180 [drm] [ 1330.879036] drm_property_create_range+0x15/0x30 [drm] [ 1330.879048] drm_connector_attach_max_bpc_property+0x62/0x80 [drm] [ 1330.879086] intel_dp_add_mst_connector+0x11f/0x140 [i915] [ 1330.879094] drm_dp_add_port.isra.20+0x20b/0x440 [drm_kms_helper] ... Cc: stable@vger.kernel.org Cc: Lyude Paul Cc: sunpeng.li@amd.com Cc: Daniel Vetter Cc: Sean Paul Fixes: 5ca0ef8a56b8 ("drm/i915: Add max_bpc property for DP MST") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20190820161657.9658-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza Reviewed-by: Lyude Paul (cherry picked from commit 1b9bd09630d4db4827cc04d358a41a16a6bc2cb0) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_dp_mst.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index 60652ebbdf61..18e4cba76720 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -539,7 +539,15 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo intel_attach_force_audio_property(connector); intel_attach_broadcast_rgb_property(connector); - drm_connector_attach_max_bpc_property(connector, 6, 12); + + /* + * Reuse the prop from the SST connector because we're + * not allowed to create new props after device registration. + */ + connector->max_bpc_property = + intel_dp->attached_connector->base.max_bpc_property; + if (connector->max_bpc_property) + drm_connector_attach_max_bpc_property(connector, 6, 12); return connector; -- cgit v1.2.3 From 0a3dfbb5cd9033752639ef33e319c2f2863c713a Mon Sep 17 00:00:00 2001 From: Xiong Zhang Date: Tue, 20 Aug 2019 13:46:17 +0800 Subject: drm/i915: Don't deballoon unused ggtt drm_mm_node in linux guest The following call trace may exist in linux guest dmesg when guest i915 driver is unloaded. [ 90.776610] [drm:vgt_deballoon_space.isra.0 [i915]] deballoon space: range [0x0 - 0x0] 0 KiB. [ 90.776621] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0 [ 90.776691] IP: drm_mm_remove_node+0x4d/0x320 [drm] [ 90.776718] PGD 800000012c7d0067 P4D 800000012c7d0067 PUD 138e4c067 PMD 0 [ 90.777091] task: ffff9adab60f2f00 task.stack: ffffaf39c0fe0000 [ 90.777142] RIP: 0010:drm_mm_remove_node+0x4d/0x320 [drm] [ 90.777573] Call Trace: [ 90.777653] intel_vgt_deballoon+0x4c/0x60 [i915] [ 90.777729] i915_ggtt_cleanup_hw+0x121/0x190 [i915] [ 90.777792] i915_driver_unload+0x145/0x180 [i915] [ 90.777856] i915_pci_remove+0x15/0x20 [i915] [ 90.777890] pci_device_remove+0x3b/0xc0 [ 90.777916] device_release_driver_internal+0x157/0x220 [ 90.777945] driver_detach+0x39/0x70 [ 90.777967] bus_remove_driver+0x51/0xd0 [ 90.777990] pci_unregister_driver+0x23/0x90 [ 90.778019] SyS_delete_module+0x1da/0x240 [ 90.778045] entry_SYSCALL_64_fastpath+0x24/0x87 [ 90.778072] RIP: 0033:0x7f34312af067 [ 90.778092] RSP: 002b:00007ffdea3da0d8 EFLAGS: 00000206 [ 90.778297] RIP: drm_mm_remove_node+0x4d/0x320 [drm] RSP: ffffaf39c0fe3dc0 [ 90.778344] ---[ end trace f4b1bc8305fc59dd ]--- Four drm_mm_node are used to reserve guest ggtt space, but some of them may be skipped and not initialised due to space constraints in intel_vgt_balloon(). If drm_mm_remove_node() is called with uninitialized drm_mm_node, the above call trace occurs. This patch check drm_mm_node's validity before calling drm_mm_remove_node(). Fixes: ff8f797557c7("drm/i915: return the correct usable aperture size under gvt environment") Cc: stable@vger.kernel.org Signed-off-by: Xiong Zhang Acked-by: Zhenyu Wang Reviewed-by: Chris Wilson Signed-off-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/1566279978-9659-1-git-send-email-xiong.y.zhang@intel.com (cherry picked from commit 4776f3529d6b1e47f02904ad1d264d25ea22b27b) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_vgpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_vgpu.c b/drivers/gpu/drm/i915/i915_vgpu.c index 94d3992b599d..724627afdedc 100644 --- a/drivers/gpu/drm/i915/i915_vgpu.c +++ b/drivers/gpu/drm/i915/i915_vgpu.c @@ -101,6 +101,9 @@ static struct _balloon_info_ bl_info; static void vgt_deballoon_space(struct i915_ggtt *ggtt, struct drm_mm_node *node) { + if (!drm_mm_node_allocated(node)) + return; + DRM_DEBUG_DRIVER("deballoon space: range [0x%llx - 0x%llx] %llu KiB.\n", node->start, node->start + node->size, -- cgit v1.2.3 From 5b6eefd667847ca6bd6925f7bd1afcecc457c889 Mon Sep 17 00:00:00 2001 From: Manasi Navare Date: Wed, 21 Aug 2019 14:59:50 -0700 Subject: drm/i915/dp: Fix DSC enable code to use cpu_transcoder instead of encoder->type This patch fixes the intel_configure_pps_for_dsc_encoder() function to use cpu_transcoder instead of encoder->type to select the correct DSC registers that was wrongly used in the original patch for one DSC register isntance. Fixes: 7182414e2530 ("drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling") Cc: Ville Syrjala Cc: Maarten Lankhorst Cc: Jani Nikula Cc: # v5.0+ Signed-off-by: Manasi Navare Reviewed-by: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/20190821215950.24223-1-manasi.d.navare@intel.com (cherry picked from commit d4c61c4a16decd8ace8660f22c81609a539fccba) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_vdsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c index ffec807b8960..f413904a3e96 100644 --- a/drivers/gpu/drm/i915/display/intel_vdsc.c +++ b/drivers/gpu/drm/i915/display/intel_vdsc.c @@ -541,7 +541,7 @@ static void intel_configure_pps_for_dsc_encoder(struct intel_encoder *encoder, pps_val |= DSC_PIC_HEIGHT(vdsc_cfg->pic_height) | DSC_PIC_WIDTH(vdsc_cfg->pic_width / num_vdsc_instances); DRM_INFO("PPS2 = 0x%08x\n", pps_val); - if (encoder->type == INTEL_OUTPUT_EDP) { + if (cpu_transcoder == TRANSCODER_EDP) { I915_WRITE(DSCA_PICTURE_PARAMETER_SET_2, pps_val); /* * If 2 VDSC instances are needed, configure PPS for second -- cgit v1.2.3 From 32f0a982650b123bdab36865617d3e03ebcacf3b Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Fri, 23 Aug 2019 16:52:51 -0400 Subject: drm/i915: Call dma_set_max_seg_size() in i915_driver_hw_probe() Currently, we don't call dma_set_max_seg_size() for i915 because we intentionally do not limit the segment length that the device supports. However, this results in a warning being emitted if we try to map anything larger than SZ_64K on a kernel with CONFIG_DMA_API_DEBUG_SG enabled: [ 7.751926] DMA-API: i915 0000:00:02.0: mapping sg segment longer than device claims to support [len=98304] [max=65536] [ 7.751934] WARNING: CPU: 5 PID: 474 at kernel/dma/debug.c:1220 debug_dma_map_sg+0x20f/0x340 This was originally brought up on https://bugs.freedesktop.org/show_bug.cgi?id=108517 , and the consensus there was it wasn't really useful to set a limit (and that dma-debug isn't really all that useful for i915 in the first place). Unfortunately though, CONFIG_DMA_API_DEBUG_SG is enabled in the debug configs for various distro kernels. Since a WARN_ON() will disable automatic problem reporting (and cause any CI with said option enabled to start complaining), we really should just fix the problem. Note that as me and Chris Wilson discussed, the other solution for this would be to make DMA-API not make such assumptions when a driver hasn't explicitly set a maximum segment size. But, taking a look at the commit which originally introduced this behavior, commit 78c47830a5cb ("dma-debug: check scatterlist segments"), there is an explicit mention of this assumption and how it applies to devices with no segment size: Conversely, devices which are less limited than the rather conservative defaults, or indeed have no limitations at all (e.g. GPUs with their own internal MMU), should be encouraged to set appropriate dma_parms, as they may get more efficient DMA mapping performance out of it. So unless there's any concerns (I'm open to discussion!), let's just follow suite and call dma_set_max_seg_size() with UINT_MAX as our limit to silence any warnings. Changes since v3: * Drop patch for enabling CONFIG_DMA_API_DEBUG_SG in CI. It looks like just turning it on causes the kernel to spit out bogus WARN_ONs() during some igt tests which would otherwise require teaching igt to disable the various DMA-API debugging options causing this. This is too much work to be worth it, since DMA-API debugging is useless for us. So, we'll just settle with this single patch to squelch WARN_ONs() during driver load for users that have CONFIG_DMA_API_DEBUG_SG turned on for some reason. * Move dma_set_max_seg_size() call into i915_driver_hw_probe() - Chris Wilson Signed-off-by: Lyude Paul Reviewed-by: Chris Wilson Cc: # v4.18+ Link: https://patchwork.freedesktop.org/patch/msgid/20190823205251.14298-1-lyude@redhat.com (cherry picked from commit acd674af95d3f627062007429b9c195c6b32361d) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index f62e3397d936..bac1ee94f63f 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -1598,6 +1598,12 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv) pci_set_master(pdev); + /* + * We don't have a max segment size, so set it to the max so sg's + * debugging layer doesn't complain + */ + dma_set_max_seg_size(&pdev->dev, UINT_MAX); + /* overlay on gen2 is broken and can't address above 1G */ if (IS_GEN(dev_priv, 2)) { ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(30)); -- cgit v1.2.3 From c96e8483cb2da6695c8b8d0896fe7ae272a07b54 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Mon, 26 Aug 2019 16:26:01 +0300 Subject: x86/boot/compressed/64: Fix missing initialization in find_trampoline_placement() Gustavo noticed that 'new' can be left uninitialized if 'bios_start' happens to be less or equal to 'entry->addr + entry->size'. Initialize the variable at the begin of the iteration to the current value of 'bios_start'. Fixes: 0a46fff2f910 ("x86/boot/compressed/64: Fix boot on machines with broken E820 table") Reported-by: "Gustavo A. R. Silva" Signed-off-by: Kirill A. Shutemov Signed-off-by: Thomas Gleixner Link: https://lkml.kernel.org/r/20190826133326.7cxb4vbmiawffv2r@box --- arch/x86/boot/compressed/pgtable_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/boot/compressed/pgtable_64.c b/arch/x86/boot/compressed/pgtable_64.c index 2faddeb0398a..c8862696a47b 100644 --- a/arch/x86/boot/compressed/pgtable_64.c +++ b/arch/x86/boot/compressed/pgtable_64.c @@ -72,7 +72,7 @@ static unsigned long find_trampoline_placement(void) /* Find the first usable memory region under bios_start. */ for (i = boot_params->e820_entries - 1; i >= 0; i--) { - unsigned long new; + unsigned long new = bios_start; entry = &boot_params->e820_table[i]; -- cgit v1.2.3 From c3c9e3df49f8d83db09d1f61c8bed54e7fed8662 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 19 Aug 2019 09:25:37 +0100 Subject: rxrpc: Improve jumbo packet counting Improve the information stored about jumbo packets so that we don't need to reparse them so much later. Signed-off-by: David Howells Reviewed-by: Jeffrey Altman --- net/rxrpc/ar-internal.h | 10 +++++++--- net/rxrpc/input.c | 23 ++++++++++++++--------- net/rxrpc/protocol.h | 9 +++++++++ 3 files changed, 30 insertions(+), 12 deletions(-) diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h index 145335611af6..87cff6c218b6 100644 --- a/net/rxrpc/ar-internal.h +++ b/net/rxrpc/ar-internal.h @@ -185,11 +185,15 @@ struct rxrpc_host_header { * - max 48 bytes (struct sk_buff::cb) */ struct rxrpc_skb_priv { - union { - u8 nr_jumbo; /* Number of jumbo subpackets */ - }; + u8 nr_subpackets; /* Number of subpackets */ + u8 rx_flags; /* Received packet flags */ +#define RXRPC_SKB_INCL_LAST 0x01 /* - Includes last packet */ union { int remain; /* amount of space remaining for next write */ + + /* List of requested ACKs on subpackets */ + unsigned long rx_req_ack[(RXRPC_MAX_NR_JUMBO + BITS_PER_LONG - 1) / + BITS_PER_LONG]; }; struct rxrpc_host_header hdr; /* RxRPC packet header from this packet */ diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c index dd47d465d1d3..ffcec5117954 100644 --- a/net/rxrpc/input.c +++ b/net/rxrpc/input.c @@ -347,7 +347,7 @@ static bool rxrpc_receiving_reply(struct rxrpc_call *call) } /* - * Scan a jumbo packet to validate its structure and to work out how many + * Scan a data packet to validate its structure and to work out how many * subpackets it contains. * * A jumbo packet is a collection of consecutive packets glued together with @@ -358,16 +358,21 @@ static bool rxrpc_receiving_reply(struct rxrpc_call *call) * the last are RXRPC_JUMBO_DATALEN in size. The last subpacket may be of any * size. */ -static bool rxrpc_validate_jumbo(struct sk_buff *skb) +static bool rxrpc_validate_data(struct sk_buff *skb) { struct rxrpc_skb_priv *sp = rxrpc_skb(skb); unsigned int offset = sizeof(struct rxrpc_wire_header); unsigned int len = skb->len; - int nr_jumbo = 1; u8 flags = sp->hdr.flags; - do { - nr_jumbo++; + for (;;) { + if (flags & RXRPC_REQUEST_ACK) + __set_bit(sp->nr_subpackets, sp->rx_req_ack); + sp->nr_subpackets++; + + if (!(flags & RXRPC_JUMBO_PACKET)) + break; + if (len - offset < RXRPC_JUMBO_SUBPKTLEN) goto protocol_error; if (flags & RXRPC_LAST_PACKET) @@ -376,9 +381,10 @@ static bool rxrpc_validate_jumbo(struct sk_buff *skb) if (skb_copy_bits(skb, offset, &flags, 1) < 0) goto protocol_error; offset += sizeof(struct rxrpc_jumbo_header); - } while (flags & RXRPC_JUMBO_PACKET); + } - sp->nr_jumbo = nr_jumbo; + if (flags & RXRPC_LAST_PACKET) + sp->rx_flags |= RXRPC_SKB_INCL_LAST; return true; protocol_error: @@ -1237,8 +1243,7 @@ int rxrpc_input_packet(struct sock *udp_sk, struct sk_buff *skb) if (sp->hdr.callNumber == 0 || sp->hdr.seq == 0) goto bad_message; - if (sp->hdr.flags & RXRPC_JUMBO_PACKET && - !rxrpc_validate_jumbo(skb)) + if (!rxrpc_validate_data(skb)) goto bad_message; break; diff --git a/net/rxrpc/protocol.h b/net/rxrpc/protocol.h index 99ce322d7caa..49bb972539aa 100644 --- a/net/rxrpc/protocol.h +++ b/net/rxrpc/protocol.h @@ -89,6 +89,15 @@ struct rxrpc_jumbo_header { #define RXRPC_JUMBO_DATALEN 1412 /* non-terminal jumbo packet data length */ #define RXRPC_JUMBO_SUBPKTLEN (RXRPC_JUMBO_DATALEN + sizeof(struct rxrpc_jumbo_header)) +/* + * The maximum number of subpackets that can possibly fit in a UDP packet is: + * + * ((max_IP - IP_hdr - UDP_hdr) / RXRPC_JUMBO_SUBPKTLEN) + 1 + * = ((65535 - 28 - 28) / 1416) + 1 + * = 46 non-terminal packets and 1 terminal packet. + */ +#define RXRPC_MAX_NR_JUMBO 47 + /*****************************************************************************/ /* * on-the-wire Rx ACK packet data payload -- cgit v1.2.3 From e2de6c4048989007b353164b19d6b7d5be4fa9e3 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 27 Aug 2019 09:51:30 +0100 Subject: rxrpc: Use info in skbuff instead of reparsing a jumbo packet Use the information now cached in the skbuff private data to avoid the need to reparse a jumbo packet. We can find all the subpackets by dead reckoning, so it's only necessary to note how many there are, whether the last one is flagged as LAST_PACKET and whether any have the REQUEST_ACK flag set. This is necessary as once recvmsg() can see the packet, it can start modifying it, such as doing in-place decryption. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: David Howells --- net/rxrpc/ar-internal.h | 3 +- net/rxrpc/input.c | 231 ++++++++++++++++++++++++------------------------ net/rxrpc/recvmsg.c | 41 +++++---- 3 files changed, 139 insertions(+), 136 deletions(-) diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h index 87cff6c218b6..20d7907a5bc6 100644 --- a/net/rxrpc/ar-internal.h +++ b/net/rxrpc/ar-internal.h @@ -617,8 +617,7 @@ struct rxrpc_call { #define RXRPC_TX_ANNO_LAST 0x04 #define RXRPC_TX_ANNO_RESENT 0x08 -#define RXRPC_RX_ANNO_JUMBO 0x3f /* Jumbo subpacket number + 1 if not zero */ -#define RXRPC_RX_ANNO_JLAST 0x40 /* Set if last element of a jumbo packet */ +#define RXRPC_RX_ANNO_SUBPACKET 0x3f /* Subpacket number in jumbogram */ #define RXRPC_RX_ANNO_VERIFIED 0x80 /* Set if verified and decrypted */ rxrpc_seq_t tx_hard_ack; /* Dead slot in buffer; the first transmitted but * not hard-ACK'd packet follows this. diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c index ffcec5117954..35b1a9368d80 100644 --- a/net/rxrpc/input.c +++ b/net/rxrpc/input.c @@ -405,10 +405,10 @@ protocol_error: * (that information is encoded in the ACK packet). */ static void rxrpc_input_dup_data(struct rxrpc_call *call, rxrpc_seq_t seq, - u8 annotation, bool *_jumbo_bad) + bool is_jumbo, bool *_jumbo_bad) { /* Discard normal packets that are duplicates. */ - if (annotation == 0) + if (is_jumbo) return; /* Skip jumbo subpackets that are duplicates. When we've had three or @@ -428,19 +428,17 @@ static void rxrpc_input_data(struct rxrpc_call *call, struct sk_buff *skb) { struct rxrpc_skb_priv *sp = rxrpc_skb(skb); enum rxrpc_call_state state; - unsigned int offset = sizeof(struct rxrpc_wire_header); - unsigned int ix; + unsigned int j; rxrpc_serial_t serial = sp->hdr.serial, ack_serial = 0; - rxrpc_seq_t seq = sp->hdr.seq, hard_ack; - bool immediate_ack = false, jumbo_bad = false, queued; - u16 len; - u8 ack = 0, flags, annotation = 0; + rxrpc_seq_t seq0 = sp->hdr.seq, hard_ack; + bool immediate_ack = false, jumbo_bad = false; + u8 ack = 0; _enter("{%u,%u},{%u,%u}", - call->rx_hard_ack, call->rx_top, skb->len, seq); + call->rx_hard_ack, call->rx_top, skb->len, seq0); - _proto("Rx DATA %%%u { #%u f=%02x }", - sp->hdr.serial, seq, sp->hdr.flags); + _proto("Rx DATA %%%u { #%u f=%02x n=%u }", + sp->hdr.serial, seq0, sp->hdr.flags, sp->nr_subpackets); state = READ_ONCE(call->state); if (state >= RXRPC_CALL_COMPLETE) @@ -469,137 +467,136 @@ static void rxrpc_input_data(struct rxrpc_call *call, struct sk_buff *skb) !rxrpc_receiving_reply(call)) goto unlock; - call->ackr_prev_seq = seq; - + call->ackr_prev_seq = seq0; hard_ack = READ_ONCE(call->rx_hard_ack); - if (after(seq, hard_ack + call->rx_winsize)) { - ack = RXRPC_ACK_EXCEEDS_WINDOW; - ack_serial = serial; - goto ack; - } - flags = sp->hdr.flags; - if (flags & RXRPC_JUMBO_PACKET) { + if (sp->nr_subpackets > 1) { if (call->nr_jumbo_bad > 3) { ack = RXRPC_ACK_NOSPACE; ack_serial = serial; goto ack; } - annotation = 1; } -next_subpacket: - queued = false; - ix = seq & RXRPC_RXTX_BUFF_MASK; - len = skb->len; - if (flags & RXRPC_JUMBO_PACKET) - len = RXRPC_JUMBO_DATALEN; - - if (flags & RXRPC_LAST_PACKET) { - if (test_bit(RXRPC_CALL_RX_LAST, &call->flags) && - seq != call->rx_top) { - rxrpc_proto_abort("LSN", call, seq); - goto unlock; - } - } else { - if (test_bit(RXRPC_CALL_RX_LAST, &call->flags) && - after_eq(seq, call->rx_top)) { - rxrpc_proto_abort("LSA", call, seq); - goto unlock; + for (j = 0; j < sp->nr_subpackets; j++) { + rxrpc_serial_t serial = sp->hdr.serial + j; + rxrpc_seq_t seq = seq0 + j; + unsigned int ix = seq & RXRPC_RXTX_BUFF_MASK; + bool terminal = (j == sp->nr_subpackets - 1); + bool last = terminal && (sp->rx_flags & RXRPC_SKB_INCL_LAST); + u8 flags, annotation = j; + + _proto("Rx DATA+%u %%%u { #%x t=%u l=%u }", + j, serial, seq, terminal, last); + + if (last) { + if (test_bit(RXRPC_CALL_RX_LAST, &call->flags) && + seq != call->rx_top) { + rxrpc_proto_abort("LSN", call, seq); + goto unlock; + } + } else { + if (test_bit(RXRPC_CALL_RX_LAST, &call->flags) && + after_eq(seq, call->rx_top)) { + rxrpc_proto_abort("LSA", call, seq); + goto unlock; + } } - } - - trace_rxrpc_rx_data(call->debug_id, seq, serial, flags, annotation); - if (before_eq(seq, hard_ack)) { - ack = RXRPC_ACK_DUPLICATE; - ack_serial = serial; - goto skip; - } - if (flags & RXRPC_REQUEST_ACK && !ack) { - ack = RXRPC_ACK_REQUESTED; - ack_serial = serial; - } + flags = 0; + if (last) + flags |= RXRPC_LAST_PACKET; + if (!terminal) + flags |= RXRPC_JUMBO_PACKET; + if (test_bit(j, sp->rx_req_ack)) + flags |= RXRPC_REQUEST_ACK; + trace_rxrpc_rx_data(call->debug_id, seq, serial, flags, annotation); - if (call->rxtx_buffer[ix]) { - rxrpc_input_dup_data(call, seq, annotation, &jumbo_bad); - if (ack != RXRPC_ACK_DUPLICATE) { + if (before_eq(seq, hard_ack)) { ack = RXRPC_ACK_DUPLICATE; ack_serial = serial; + continue; } - immediate_ack = true; - goto skip; - } - - /* Queue the packet. We use a couple of memory barriers here as need - * to make sure that rx_top is perceived to be set after the buffer - * pointer and that the buffer pointer is set after the annotation and - * the skb data. - * - * Barriers against rxrpc_recvmsg_data() and rxrpc_rotate_rx_window() - * and also rxrpc_fill_out_ack(). - */ - rxrpc_get_skb(skb, rxrpc_skb_rx_got); - call->rxtx_annotations[ix] = annotation; - smp_wmb(); - call->rxtx_buffer[ix] = skb; - if (after(seq, call->rx_top)) { - smp_store_release(&call->rx_top, seq); - } else if (before(seq, call->rx_top)) { - /* Send an immediate ACK if we fill in a hole */ - if (!ack) { - ack = RXRPC_ACK_DELAY; - ack_serial = serial; - } - immediate_ack = true; - } - if (flags & RXRPC_LAST_PACKET) { - set_bit(RXRPC_CALL_RX_LAST, &call->flags); - trace_rxrpc_receive(call, rxrpc_receive_queue_last, serial, seq); - } else { - trace_rxrpc_receive(call, rxrpc_receive_queue, serial, seq); - } - queued = true; - if (after_eq(seq, call->rx_expect_next)) { - if (after(seq, call->rx_expect_next)) { - _net("OOS %u > %u", seq, call->rx_expect_next); - ack = RXRPC_ACK_OUT_OF_SEQUENCE; - ack_serial = serial; + if (call->rxtx_buffer[ix]) { + rxrpc_input_dup_data(call, seq, sp->nr_subpackets > 1, + &jumbo_bad); + if (ack != RXRPC_ACK_DUPLICATE) { + ack = RXRPC_ACK_DUPLICATE; + ack_serial = serial; + } + immediate_ack = true; + continue; } - call->rx_expect_next = seq + 1; - } -skip: - offset += len; - if (flags & RXRPC_JUMBO_PACKET) { - if (skb_copy_bits(skb, offset, &flags, 1) < 0) { - rxrpc_proto_abort("XJF", call, seq); - goto unlock; - } - offset += sizeof(struct rxrpc_jumbo_header); - seq++; - serial++; - annotation++; - if (flags & RXRPC_JUMBO_PACKET) - annotation |= RXRPC_RX_ANNO_JLAST; if (after(seq, hard_ack + call->rx_winsize)) { ack = RXRPC_ACK_EXCEEDS_WINDOW; ack_serial = serial; - if (!jumbo_bad) { - call->nr_jumbo_bad++; - jumbo_bad = true; + if (flags & RXRPC_JUMBO_PACKET) { + if (!jumbo_bad) { + call->nr_jumbo_bad++; + jumbo_bad = true; + } } + goto ack; } - _proto("Rx DATA Jumbo %%%u", serial); - goto next_subpacket; - } + if (flags & RXRPC_REQUEST_ACK && !ack) { + ack = RXRPC_ACK_REQUESTED; + ack_serial = serial; + } + + /* Queue the packet. We use a couple of memory barriers here as need + * to make sure that rx_top is perceived to be set after the buffer + * pointer and that the buffer pointer is set after the annotation and + * the skb data. + * + * Barriers against rxrpc_recvmsg_data() and rxrpc_rotate_rx_window() + * and also rxrpc_fill_out_ack(). + */ + rxrpc_get_skb(skb, rxrpc_skb_rx_got); + call->rxtx_annotations[ix] = annotation; + smp_wmb(); + call->rxtx_buffer[ix] = skb; + if (after(seq, call->rx_top)) { + smp_store_release(&call->rx_top, seq); + } else if (before(seq, call->rx_top)) { + /* Send an immediate ACK if we fill in a hole */ + if (!ack) { + ack = RXRPC_ACK_DELAY; + ack_serial = serial; + } + immediate_ack = true; + } + + if (terminal) { + /* From this point on, we're not allowed to touch the + * packet any longer as its ref now belongs to the Rx + * ring. + */ + skb = NULL; + } - if (queued && flags & RXRPC_LAST_PACKET && !ack) { - ack = RXRPC_ACK_DELAY; - ack_serial = serial; + if (last) { + set_bit(RXRPC_CALL_RX_LAST, &call->flags); + if (!ack) { + ack = RXRPC_ACK_DELAY; + ack_serial = serial; + } + trace_rxrpc_receive(call, rxrpc_receive_queue_last, serial, seq); + } else { + trace_rxrpc_receive(call, rxrpc_receive_queue, serial, seq); + } + + if (after_eq(seq, call->rx_expect_next)) { + if (after(seq, call->rx_expect_next)) { + _net("OOS %u > %u", seq, call->rx_expect_next); + ack = RXRPC_ACK_OUT_OF_SEQUENCE; + ack_serial = serial; + } + call->rx_expect_next = seq + 1; + } } ack: @@ -612,7 +609,7 @@ ack: false, true, rxrpc_propose_ack_input_data); - if (sp->hdr.seq == READ_ONCE(call->rx_hard_ack) + 1) { + if (seq0 == READ_ONCE(call->rx_hard_ack) + 1) { trace_rxrpc_notify_socket(call->debug_id, serial); rxrpc_notify_socket(call); } diff --git a/net/rxrpc/recvmsg.c b/net/rxrpc/recvmsg.c index 9a7e1bc9791d..e49eacfaf4d6 100644 --- a/net/rxrpc/recvmsg.c +++ b/net/rxrpc/recvmsg.c @@ -177,7 +177,8 @@ static void rxrpc_rotate_rx_window(struct rxrpc_call *call) struct sk_buff *skb; rxrpc_serial_t serial; rxrpc_seq_t hard_ack, top; - u8 flags; + bool last = false; + u8 subpacket; int ix; _enter("%d", call->debug_id); @@ -191,10 +192,13 @@ static void rxrpc_rotate_rx_window(struct rxrpc_call *call) skb = call->rxtx_buffer[ix]; rxrpc_see_skb(skb, rxrpc_skb_rx_rotated); sp = rxrpc_skb(skb); - flags = sp->hdr.flags; - serial = sp->hdr.serial; - if (call->rxtx_annotations[ix] & RXRPC_RX_ANNO_JUMBO) - serial += (call->rxtx_annotations[ix] & RXRPC_RX_ANNO_JUMBO) - 1; + + subpacket = call->rxtx_annotations[ix] & RXRPC_RX_ANNO_SUBPACKET; + serial = sp->hdr.serial + subpacket; + + if (subpacket == sp->nr_subpackets - 1 && + sp->rx_flags & RXRPC_SKB_INCL_LAST) + last = true; call->rxtx_buffer[ix] = NULL; call->rxtx_annotations[ix] = 0; @@ -203,9 +207,8 @@ static void rxrpc_rotate_rx_window(struct rxrpc_call *call) rxrpc_free_skb(skb, rxrpc_skb_rx_freed); - _debug("%u,%u,%02x", hard_ack, top, flags); trace_rxrpc_receive(call, rxrpc_receive_rotate, serial, hard_ack); - if (flags & RXRPC_LAST_PACKET) { + if (last) { rxrpc_end_rx_phase(call, serial); } else { /* Check to see if there's an ACK that needs sending. */ @@ -233,18 +236,19 @@ static int rxrpc_verify_packet(struct rxrpc_call *call, struct sk_buff *skb, struct rxrpc_skb_priv *sp = rxrpc_skb(skb); rxrpc_seq_t seq = sp->hdr.seq; u16 cksum = sp->hdr.cksum; + u8 subpacket = annotation & RXRPC_RX_ANNO_SUBPACKET; _enter(""); /* For all but the head jumbo subpacket, the security checksum is in a * jumbo header immediately prior to the data. */ - if ((annotation & RXRPC_RX_ANNO_JUMBO) > 1) { + if (subpacket > 0) { __be16 tmp; if (skb_copy_bits(skb, offset - 2, &tmp, 2) < 0) BUG(); cksum = ntohs(tmp); - seq += (annotation & RXRPC_RX_ANNO_JUMBO) - 1; + seq += subpacket; } return call->conn->security->verify_packet(call, skb, offset, len, @@ -265,19 +269,18 @@ static int rxrpc_locate_data(struct rxrpc_call *call, struct sk_buff *skb, u8 *_annotation, unsigned int *_offset, unsigned int *_len) { + struct rxrpc_skb_priv *sp = rxrpc_skb(skb); unsigned int offset = sizeof(struct rxrpc_wire_header); unsigned int len; int ret; u8 annotation = *_annotation; + u8 subpacket = annotation & RXRPC_RX_ANNO_SUBPACKET; /* Locate the subpacket */ + offset += subpacket * RXRPC_JUMBO_SUBPKTLEN; len = skb->len - offset; - if ((annotation & RXRPC_RX_ANNO_JUMBO) > 0) { - offset += (((annotation & RXRPC_RX_ANNO_JUMBO) - 1) * - RXRPC_JUMBO_SUBPKTLEN); - len = (annotation & RXRPC_RX_ANNO_JLAST) ? - skb->len - offset : RXRPC_JUMBO_SUBPKTLEN; - } + if (subpacket < sp->nr_subpackets - 1) + len = RXRPC_JUMBO_DATALEN; if (!(annotation & RXRPC_RX_ANNO_VERIFIED)) { ret = rxrpc_verify_packet(call, skb, annotation, offset, len); @@ -303,6 +306,7 @@ static int rxrpc_recvmsg_data(struct socket *sock, struct rxrpc_call *call, { struct rxrpc_skb_priv *sp; struct sk_buff *skb; + rxrpc_serial_t serial; rxrpc_seq_t hard_ack, top, seq; size_t remain; bool last; @@ -339,9 +343,12 @@ static int rxrpc_recvmsg_data(struct socket *sock, struct rxrpc_call *call, rxrpc_see_skb(skb, rxrpc_skb_rx_seen); sp = rxrpc_skb(skb); - if (!(flags & MSG_PEEK)) + if (!(flags & MSG_PEEK)) { + serial = sp->hdr.serial; + serial += call->rxtx_annotations[ix] & RXRPC_RX_ANNO_SUBPACKET; trace_rxrpc_receive(call, rxrpc_receive_front, - sp->hdr.serial, seq); + serial, seq); + } if (msg) sock_recv_timestamp(msg, sock->sk, skb); -- cgit v1.2.3 From 4858e40303fba12e7506bf4354f20fdf550b3cd5 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 19 Aug 2019 09:25:36 +0100 Subject: rxrpc: Pass the input handler's data skb reference to the Rx ring Pass the reference held on a DATA skb in the rxrpc input handler into the Rx ring rather than getting an additional ref for this and then dropping the original ref at the end. Signed-off-by: David Howells --- net/rxrpc/input.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c index 35b1a9368d80..140cede77655 100644 --- a/net/rxrpc/input.c +++ b/net/rxrpc/input.c @@ -422,7 +422,8 @@ static void rxrpc_input_dup_data(struct rxrpc_call *call, rxrpc_seq_t seq, } /* - * Process a DATA packet, adding the packet to the Rx ring. + * Process a DATA packet, adding the packet to the Rx ring. The caller's + * packet ref must be passed on or discarded. */ static void rxrpc_input_data(struct rxrpc_call *call, struct sk_buff *skb) { @@ -441,8 +442,10 @@ static void rxrpc_input_data(struct rxrpc_call *call, struct sk_buff *skb) sp->hdr.serial, seq0, sp->hdr.flags, sp->nr_subpackets); state = READ_ONCE(call->state); - if (state >= RXRPC_CALL_COMPLETE) + if (state >= RXRPC_CALL_COMPLETE) { + rxrpc_free_skb(skb, rxrpc_skb_rx_freed); return; + } if (call->state == RXRPC_CALL_SERVER_RECV_REQUEST) { unsigned long timo = READ_ONCE(call->next_req_timo); @@ -555,7 +558,8 @@ static void rxrpc_input_data(struct rxrpc_call *call, struct sk_buff *skb) * Barriers against rxrpc_recvmsg_data() and rxrpc_rotate_rx_window() * and also rxrpc_fill_out_ack(). */ - rxrpc_get_skb(skb, rxrpc_skb_rx_got); + if (!terminal) + rxrpc_get_skb(skb, rxrpc_skb_rx_got); call->rxtx_annotations[ix] = annotation; smp_wmb(); call->rxtx_buffer[ix] = skb; @@ -616,6 +620,7 @@ ack: unlock: spin_unlock(&call->input_lock); + rxrpc_free_skb(skb, rxrpc_skb_rx_freed); _leave(" [queued]"); } @@ -1024,7 +1029,7 @@ static void rxrpc_input_call_packet(struct rxrpc_call *call, switch (sp->hdr.type) { case RXRPC_PACKET_TYPE_DATA: rxrpc_input_data(call, skb); - break; + goto no_free; case RXRPC_PACKET_TYPE_ACK: rxrpc_input_ack(call, skb); @@ -1051,6 +1056,8 @@ static void rxrpc_input_call_packet(struct rxrpc_call *call, break; } + rxrpc_free_skb(skb, rxrpc_skb_rx_freed); +no_free: _leave(""); } @@ -1375,8 +1382,11 @@ int rxrpc_input_packet(struct sock *udp_sk, struct sk_buff *skb) mutex_unlock(&call->user_mutex); } + /* Process a call packet; this either discards or passes on the ref + * elsewhere. + */ rxrpc_input_call_packet(call, skb); - goto discard; + goto out; discard: rxrpc_free_skb(skb, rxrpc_skb_rx_freed); -- cgit v1.2.3 From a641fd00d05a5ae38c5a3d50d4da10283b15287b Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 19 Aug 2019 09:25:37 +0100 Subject: rxrpc: Abstract out rxtx ring cleanup Abstract out rxtx ring cleanup into its own function from its two callers. This makes it easier to apply the same changes to both. Signed-off-by: David Howells --- net/rxrpc/call_object.c | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) diff --git a/net/rxrpc/call_object.c b/net/rxrpc/call_object.c index 217b12be9e08..c9ab2da957fe 100644 --- a/net/rxrpc/call_object.c +++ b/net/rxrpc/call_object.c @@ -421,6 +421,21 @@ void rxrpc_get_call(struct rxrpc_call *call, enum rxrpc_call_trace op) trace_rxrpc_call(call, op, n, here, NULL); } +/* + * Clean up the RxTx skb ring. + */ +static void rxrpc_cleanup_ring(struct rxrpc_call *call) +{ + int i; + + for (i = 0; i < RXRPC_RXTX_BUFF_SIZE; i++) { + rxrpc_free_skb(call->rxtx_buffer[i], + (call->tx_phase ? rxrpc_skb_tx_cleaned : + rxrpc_skb_rx_cleaned)); + call->rxtx_buffer[i] = NULL; + } +} + /* * Detach a call from its owning socket. */ @@ -429,7 +444,6 @@ void rxrpc_release_call(struct rxrpc_sock *rx, struct rxrpc_call *call) const void *here = __builtin_return_address(0); struct rxrpc_connection *conn = call->conn; bool put = false; - int i; _enter("{%d,%d}", call->debug_id, atomic_read(&call->usage)); @@ -479,13 +493,7 @@ void rxrpc_release_call(struct rxrpc_sock *rx, struct rxrpc_call *call) if (conn) rxrpc_disconnect_call(call); - for (i = 0; i < RXRPC_RXTX_BUFF_SIZE; i++) { - rxrpc_free_skb(call->rxtx_buffer[i], - (call->tx_phase ? rxrpc_skb_tx_cleaned : - rxrpc_skb_rx_cleaned)); - call->rxtx_buffer[i] = NULL; - } - + rxrpc_cleanup_ring(call); _leave(""); } @@ -568,8 +576,6 @@ static void rxrpc_rcu_destroy_call(struct rcu_head *rcu) */ void rxrpc_cleanup_call(struct rxrpc_call *call) { - int i; - _net("DESTROY CALL %d", call->debug_id); memset(&call->sock_node, 0xcd, sizeof(call->sock_node)); @@ -580,12 +586,7 @@ void rxrpc_cleanup_call(struct rxrpc_call *call) ASSERT(test_bit(RXRPC_CALL_RELEASED, &call->flags)); ASSERTCMP(call->conn, ==, NULL); - /* Clean up the Rx/Tx buffer */ - for (i = 0; i < RXRPC_RXTX_BUFF_SIZE; i++) - rxrpc_free_skb(call->rxtx_buffer[i], - (call->tx_phase ? rxrpc_skb_tx_cleaned : - rxrpc_skb_rx_cleaned)); - + rxrpc_cleanup_ring(call); rxrpc_free_skb(call->tx_pending, rxrpc_skb_tx_cleaned); call_rcu(&call->rcu, rxrpc_rcu_destroy_call); -- cgit v1.2.3 From b311e68420aa52098591988d0d6868b0b7463c0f Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 19 Aug 2019 09:25:37 +0100 Subject: rxrpc: Add a private skb flag to indicate transmission-phase skbs Add a flag in the private data on an skbuff to indicate that this is a transmission-phase buffer rather than a receive-phase buffer. Signed-off-by: David Howells --- net/rxrpc/ar-internal.h | 1 + net/rxrpc/sendmsg.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h index 20d7907a5bc6..63d3a91ce5e9 100644 --- a/net/rxrpc/ar-internal.h +++ b/net/rxrpc/ar-internal.h @@ -188,6 +188,7 @@ struct rxrpc_skb_priv { u8 nr_subpackets; /* Number of subpackets */ u8 rx_flags; /* Received packet flags */ #define RXRPC_SKB_INCL_LAST 0x01 /* - Includes last packet */ +#define RXRPC_SKB_TX_BUFFER 0x02 /* - Is transmit buffer */ union { int remain; /* amount of space remaining for next write */ diff --git a/net/rxrpc/sendmsg.c b/net/rxrpc/sendmsg.c index bae14438f869..472dc3b7d91f 100644 --- a/net/rxrpc/sendmsg.c +++ b/net/rxrpc/sendmsg.c @@ -336,6 +336,8 @@ static int rxrpc_send_data(struct rxrpc_sock *rx, if (!skb) goto maybe_error; + sp = rxrpc_skb(skb); + sp->rx_flags |= RXRPC_SKB_TX_BUFFER; rxrpc_new_skb(skb, rxrpc_skb_tx_new); _debug("ALLOC SEND %p", skb); @@ -346,7 +348,6 @@ static int rxrpc_send_data(struct rxrpc_sock *rx, skb_reserve(skb, call->conn->security_size); skb->len += call->conn->security_size; - sp = rxrpc_skb(skb); sp->remain = chunk; if (sp->remain > skb_tailroom(skb)) sp->remain = skb_tailroom(skb); -- cgit v1.2.3 From 987db9f7cd1e77e611b770a569068c43949aa6fd Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 19 Aug 2019 09:25:38 +0100 Subject: rxrpc: Use the tx-phase skb flag to simplify tracing Use the previously-added transmit-phase skbuff private flag to simplify the socket buffer tracing a bit. Which phase the skbuff comes from can now be divined from the skb rather than having to be guessed from the call state. We can also reduce the number of rxrpc_skb_trace values by eliminating the difference between Tx and Rx in the symbols. Signed-off-by: David Howells --- include/trace/events/rxrpc.h | 51 +++++++++++++++++++------------------------- net/rxrpc/ar-internal.h | 1 + net/rxrpc/call_event.c | 8 +++---- net/rxrpc/call_object.c | 6 ++---- net/rxrpc/conn_event.c | 6 +++--- net/rxrpc/input.c | 22 +++++++++---------- net/rxrpc/local_event.c | 4 ++-- net/rxrpc/output.c | 6 +++--- net/rxrpc/peer_event.c | 10 ++++----- net/rxrpc/recvmsg.c | 6 +++--- net/rxrpc/sendmsg.c | 10 ++++----- net/rxrpc/skbuff.c | 15 +++++++------ 12 files changed, 69 insertions(+), 76 deletions(-) diff --git a/include/trace/events/rxrpc.h b/include/trace/events/rxrpc.h index fa06b528c73c..e2356c51883b 100644 --- a/include/trace/events/rxrpc.h +++ b/include/trace/events/rxrpc.h @@ -23,20 +23,15 @@ #define __RXRPC_DECLARE_TRACE_ENUMS_ONCE_ONLY enum rxrpc_skb_trace { - rxrpc_skb_rx_cleaned, - rxrpc_skb_rx_freed, - rxrpc_skb_rx_got, - rxrpc_skb_rx_lost, - rxrpc_skb_rx_purged, - rxrpc_skb_rx_received, - rxrpc_skb_rx_rotated, - rxrpc_skb_rx_seen, - rxrpc_skb_tx_cleaned, - rxrpc_skb_tx_freed, - rxrpc_skb_tx_got, - rxrpc_skb_tx_new, - rxrpc_skb_tx_rotated, - rxrpc_skb_tx_seen, + rxrpc_skb_cleaned, + rxrpc_skb_freed, + rxrpc_skb_got, + rxrpc_skb_lost, + rxrpc_skb_new, + rxrpc_skb_purged, + rxrpc_skb_received, + rxrpc_skb_rotated, + rxrpc_skb_seen, }; enum rxrpc_local_trace { @@ -228,20 +223,15 @@ enum rxrpc_tx_point { * Declare tracing information enums and their string mappings for display. */ #define rxrpc_skb_traces \ - EM(rxrpc_skb_rx_cleaned, "Rx CLN") \ - EM(rxrpc_skb_rx_freed, "Rx FRE") \ - EM(rxrpc_skb_rx_got, "Rx GOT") \ - EM(rxrpc_skb_rx_lost, "Rx *L*") \ - EM(rxrpc_skb_rx_purged, "Rx PUR") \ - EM(rxrpc_skb_rx_received, "Rx RCV") \ - EM(rxrpc_skb_rx_rotated, "Rx ROT") \ - EM(rxrpc_skb_rx_seen, "Rx SEE") \ - EM(rxrpc_skb_tx_cleaned, "Tx CLN") \ - EM(rxrpc_skb_tx_freed, "Tx FRE") \ - EM(rxrpc_skb_tx_got, "Tx GOT") \ - EM(rxrpc_skb_tx_new, "Tx NEW") \ - EM(rxrpc_skb_tx_rotated, "Tx ROT") \ - E_(rxrpc_skb_tx_seen, "Tx SEE") + EM(rxrpc_skb_cleaned, "CLN") \ + EM(rxrpc_skb_freed, "FRE") \ + EM(rxrpc_skb_got, "GOT") \ + EM(rxrpc_skb_lost, "*L*") \ + EM(rxrpc_skb_new, "NEW") \ + EM(rxrpc_skb_purged, "PUR") \ + EM(rxrpc_skb_received, "RCV") \ + EM(rxrpc_skb_rotated, "ROT") \ + E_(rxrpc_skb_seen, "SEE") #define rxrpc_local_traces \ EM(rxrpc_local_got, "GOT") \ @@ -650,6 +640,7 @@ TRACE_EVENT(rxrpc_skb, TP_STRUCT__entry( __field(struct sk_buff *, skb ) __field(enum rxrpc_skb_trace, op ) + __field(u8, flags ) __field(int, usage ) __field(int, mod_count ) __field(const void *, where ) @@ -657,14 +648,16 @@ TRACE_EVENT(rxrpc_skb, TP_fast_assign( __entry->skb = skb; + __entry->flags = rxrpc_skb(skb)->rx_flags; __entry->op = op; __entry->usage = usage; __entry->mod_count = mod_count; __entry->where = where; ), - TP_printk("s=%p %s u=%d m=%d p=%pSR", + TP_printk("s=%p %cx %s u=%d m=%d p=%pSR", __entry->skb, + __entry->flags & RXRPC_SKB_TX_BUFFER ? 'T' : 'R', __print_symbolic(__entry->op, rxrpc_skb_traces), __entry->usage, __entry->mod_count, diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h index 63d3a91ce5e9..2d5294f3e62f 100644 --- a/net/rxrpc/ar-internal.h +++ b/net/rxrpc/ar-internal.h @@ -185,6 +185,7 @@ struct rxrpc_host_header { * - max 48 bytes (struct sk_buff::cb) */ struct rxrpc_skb_priv { + atomic_t nr_ring_pins; /* Number of rxtx ring pins */ u8 nr_subpackets; /* Number of subpackets */ u8 rx_flags; /* Received packet flags */ #define RXRPC_SKB_INCL_LAST 0x01 /* - Includes last packet */ diff --git a/net/rxrpc/call_event.c b/net/rxrpc/call_event.c index c767679bfa5d..cedbbb3a7c2e 100644 --- a/net/rxrpc/call_event.c +++ b/net/rxrpc/call_event.c @@ -199,7 +199,7 @@ static void rxrpc_resend(struct rxrpc_call *call, unsigned long now_j) continue; skb = call->rxtx_buffer[ix]; - rxrpc_see_skb(skb, rxrpc_skb_tx_seen); + rxrpc_see_skb(skb, rxrpc_skb_seen); if (anno_type == RXRPC_TX_ANNO_UNACK) { if (ktime_after(skb->tstamp, max_age)) { @@ -255,18 +255,18 @@ static void rxrpc_resend(struct rxrpc_call *call, unsigned long now_j) continue; skb = call->rxtx_buffer[ix]; - rxrpc_get_skb(skb, rxrpc_skb_tx_got); + rxrpc_get_skb(skb, rxrpc_skb_got); spin_unlock_bh(&call->lock); if (rxrpc_send_data_packet(call, skb, true) < 0) { - rxrpc_free_skb(skb, rxrpc_skb_tx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); return; } if (rxrpc_is_client_call(call)) rxrpc_expose_client_call(call); - rxrpc_free_skb(skb, rxrpc_skb_tx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); spin_lock_bh(&call->lock); /* We need to clear the retransmit state, but there are two diff --git a/net/rxrpc/call_object.c b/net/rxrpc/call_object.c index c9ab2da957fe..014548c259ce 100644 --- a/net/rxrpc/call_object.c +++ b/net/rxrpc/call_object.c @@ -429,9 +429,7 @@ static void rxrpc_cleanup_ring(struct rxrpc_call *call) int i; for (i = 0; i < RXRPC_RXTX_BUFF_SIZE; i++) { - rxrpc_free_skb(call->rxtx_buffer[i], - (call->tx_phase ? rxrpc_skb_tx_cleaned : - rxrpc_skb_rx_cleaned)); + rxrpc_free_skb(call->rxtx_buffer[i], rxrpc_skb_cleaned); call->rxtx_buffer[i] = NULL; } } @@ -587,7 +585,7 @@ void rxrpc_cleanup_call(struct rxrpc_call *call) ASSERTCMP(call->conn, ==, NULL); rxrpc_cleanup_ring(call); - rxrpc_free_skb(call->tx_pending, rxrpc_skb_tx_cleaned); + rxrpc_free_skb(call->tx_pending, rxrpc_skb_cleaned); call_rcu(&call->rcu, rxrpc_rcu_destroy_call); } diff --git a/net/rxrpc/conn_event.c b/net/rxrpc/conn_event.c index df6624c140be..a1ceef4f5cd0 100644 --- a/net/rxrpc/conn_event.c +++ b/net/rxrpc/conn_event.c @@ -472,7 +472,7 @@ void rxrpc_process_connection(struct work_struct *work) /* go through the conn-level event packets, releasing the ref on this * connection that each one has when we've finished with it */ while ((skb = skb_dequeue(&conn->rx_queue))) { - rxrpc_see_skb(skb, rxrpc_skb_rx_seen); + rxrpc_see_skb(skb, rxrpc_skb_seen); ret = rxrpc_process_event(conn, skb, &abort_code); switch (ret) { case -EPROTO: @@ -484,7 +484,7 @@ void rxrpc_process_connection(struct work_struct *work) goto requeue_and_leave; case -ECONNABORTED: default: - rxrpc_free_skb(skb, rxrpc_skb_rx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); break; } } @@ -501,6 +501,6 @@ requeue_and_leave: protocol_error: if (rxrpc_abort_connection(conn, ret, abort_code) < 0) goto requeue_and_leave; - rxrpc_free_skb(skb, rxrpc_skb_rx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); goto out; } diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c index 140cede77655..31090bdf1fae 100644 --- a/net/rxrpc/input.c +++ b/net/rxrpc/input.c @@ -233,7 +233,7 @@ static bool rxrpc_rotate_tx_window(struct rxrpc_call *call, rxrpc_seq_t to, ix = call->tx_hard_ack & RXRPC_RXTX_BUFF_MASK; skb = call->rxtx_buffer[ix]; annotation = call->rxtx_annotations[ix]; - rxrpc_see_skb(skb, rxrpc_skb_tx_rotated); + rxrpc_see_skb(skb, rxrpc_skb_rotated); call->rxtx_buffer[ix] = NULL; call->rxtx_annotations[ix] = 0; skb->next = list; @@ -258,7 +258,7 @@ static bool rxrpc_rotate_tx_window(struct rxrpc_call *call, rxrpc_seq_t to, skb = list; list = skb->next; skb_mark_not_on_list(skb); - rxrpc_free_skb(skb, rxrpc_skb_tx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); } return rot_last; @@ -443,7 +443,7 @@ static void rxrpc_input_data(struct rxrpc_call *call, struct sk_buff *skb) state = READ_ONCE(call->state); if (state >= RXRPC_CALL_COMPLETE) { - rxrpc_free_skb(skb, rxrpc_skb_rx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); return; } @@ -559,7 +559,7 @@ static void rxrpc_input_data(struct rxrpc_call *call, struct sk_buff *skb) * and also rxrpc_fill_out_ack(). */ if (!terminal) - rxrpc_get_skb(skb, rxrpc_skb_rx_got); + rxrpc_get_skb(skb, rxrpc_skb_got); call->rxtx_annotations[ix] = annotation; smp_wmb(); call->rxtx_buffer[ix] = skb; @@ -620,7 +620,7 @@ ack: unlock: spin_unlock(&call->input_lock); - rxrpc_free_skb(skb, rxrpc_skb_rx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); _leave(" [queued]"); } @@ -1056,7 +1056,7 @@ static void rxrpc_input_call_packet(struct rxrpc_call *call, break; } - rxrpc_free_skb(skb, rxrpc_skb_rx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); no_free: _leave(""); } @@ -1119,7 +1119,7 @@ static void rxrpc_post_packet_to_local(struct rxrpc_local *local, skb_queue_tail(&local->event_queue, skb); rxrpc_queue_local(local); } else { - rxrpc_free_skb(skb, rxrpc_skb_rx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); } } @@ -1134,7 +1134,7 @@ static void rxrpc_reject_packet(struct rxrpc_local *local, struct sk_buff *skb) skb_queue_tail(&local->reject_queue, skb); rxrpc_queue_local(local); } else { - rxrpc_free_skb(skb, rxrpc_skb_rx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); } } @@ -1198,7 +1198,7 @@ int rxrpc_input_packet(struct sock *udp_sk, struct sk_buff *skb) if (skb->tstamp == 0) skb->tstamp = ktime_get_real(); - rxrpc_new_skb(skb, rxrpc_skb_rx_received); + rxrpc_new_skb(skb, rxrpc_skb_received); skb_pull(skb, sizeof(struct udphdr)); @@ -1215,7 +1215,7 @@ int rxrpc_input_packet(struct sock *udp_sk, struct sk_buff *skb) static int lose; if ((lose++ & 7) == 7) { trace_rxrpc_rx_lose(sp); - rxrpc_free_skb(skb, rxrpc_skb_rx_lost); + rxrpc_free_skb(skb, rxrpc_skb_lost); return 0; } } @@ -1389,7 +1389,7 @@ int rxrpc_input_packet(struct sock *udp_sk, struct sk_buff *skb) goto out; discard: - rxrpc_free_skb(skb, rxrpc_skb_rx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); out: trace_rxrpc_rx_done(0, 0); return 0; diff --git a/net/rxrpc/local_event.c b/net/rxrpc/local_event.c index e93a78f7c05e..3ce6d628cd75 100644 --- a/net/rxrpc/local_event.c +++ b/net/rxrpc/local_event.c @@ -90,7 +90,7 @@ void rxrpc_process_local_events(struct rxrpc_local *local) if (skb) { struct rxrpc_skb_priv *sp = rxrpc_skb(skb); - rxrpc_see_skb(skb, rxrpc_skb_rx_seen); + rxrpc_see_skb(skb, rxrpc_skb_seen); _debug("{%d},{%u}", local->debug_id, sp->hdr.type); switch (sp->hdr.type) { @@ -108,7 +108,7 @@ void rxrpc_process_local_events(struct rxrpc_local *local) break; } - rxrpc_free_skb(skb, rxrpc_skb_rx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); } _leave(""); diff --git a/net/rxrpc/output.c b/net/rxrpc/output.c index 369e516c4bdf..935bb60fff56 100644 --- a/net/rxrpc/output.c +++ b/net/rxrpc/output.c @@ -565,7 +565,7 @@ void rxrpc_reject_packets(struct rxrpc_local *local) memset(&whdr, 0, sizeof(whdr)); while ((skb = skb_dequeue(&local->reject_queue))) { - rxrpc_see_skb(skb, rxrpc_skb_rx_seen); + rxrpc_see_skb(skb, rxrpc_skb_seen); sp = rxrpc_skb(skb); switch (skb->mark) { @@ -581,7 +581,7 @@ void rxrpc_reject_packets(struct rxrpc_local *local) ioc = 2; break; default: - rxrpc_free_skb(skb, rxrpc_skb_rx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); continue; } @@ -606,7 +606,7 @@ void rxrpc_reject_packets(struct rxrpc_local *local) rxrpc_tx_point_reject); } - rxrpc_free_skb(skb, rxrpc_skb_rx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); } _leave(""); diff --git a/net/rxrpc/peer_event.c b/net/rxrpc/peer_event.c index 7666ec72d37e..c97ebdc043e4 100644 --- a/net/rxrpc/peer_event.c +++ b/net/rxrpc/peer_event.c @@ -163,11 +163,11 @@ void rxrpc_error_report(struct sock *sk) _leave("UDP socket errqueue empty"); return; } - rxrpc_new_skb(skb, rxrpc_skb_rx_received); + rxrpc_new_skb(skb, rxrpc_skb_received); serr = SKB_EXT_ERR(skb); if (!skb->len && serr->ee.ee_origin == SO_EE_ORIGIN_TIMESTAMPING) { _leave("UDP empty message"); - rxrpc_free_skb(skb, rxrpc_skb_rx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); return; } @@ -177,7 +177,7 @@ void rxrpc_error_report(struct sock *sk) peer = NULL; if (!peer) { rcu_read_unlock(); - rxrpc_free_skb(skb, rxrpc_skb_rx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); _leave(" [no peer]"); return; } @@ -189,7 +189,7 @@ void rxrpc_error_report(struct sock *sk) serr->ee.ee_code == ICMP_FRAG_NEEDED)) { rxrpc_adjust_mtu(peer, serr); rcu_read_unlock(); - rxrpc_free_skb(skb, rxrpc_skb_rx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); rxrpc_put_peer(peer); _leave(" [MTU update]"); return; @@ -197,7 +197,7 @@ void rxrpc_error_report(struct sock *sk) rxrpc_store_error(peer, serr); rcu_read_unlock(); - rxrpc_free_skb(skb, rxrpc_skb_rx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); rxrpc_put_peer(peer); _leave(""); diff --git a/net/rxrpc/recvmsg.c b/net/rxrpc/recvmsg.c index e49eacfaf4d6..3b0becb12041 100644 --- a/net/rxrpc/recvmsg.c +++ b/net/rxrpc/recvmsg.c @@ -190,7 +190,7 @@ static void rxrpc_rotate_rx_window(struct rxrpc_call *call) hard_ack++; ix = hard_ack & RXRPC_RXTX_BUFF_MASK; skb = call->rxtx_buffer[ix]; - rxrpc_see_skb(skb, rxrpc_skb_rx_rotated); + rxrpc_see_skb(skb, rxrpc_skb_rotated); sp = rxrpc_skb(skb); subpacket = call->rxtx_annotations[ix] & RXRPC_RX_ANNO_SUBPACKET; @@ -205,7 +205,7 @@ static void rxrpc_rotate_rx_window(struct rxrpc_call *call) /* Barrier against rxrpc_input_data(). */ smp_store_release(&call->rx_hard_ack, hard_ack); - rxrpc_free_skb(skb, rxrpc_skb_rx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); trace_rxrpc_receive(call, rxrpc_receive_rotate, serial, hard_ack); if (last) { @@ -340,7 +340,7 @@ static int rxrpc_recvmsg_data(struct socket *sock, struct rxrpc_call *call, break; } smp_rmb(); - rxrpc_see_skb(skb, rxrpc_skb_rx_seen); + rxrpc_see_skb(skb, rxrpc_skb_seen); sp = rxrpc_skb(skb); if (!(flags & MSG_PEEK)) { diff --git a/net/rxrpc/sendmsg.c b/net/rxrpc/sendmsg.c index 472dc3b7d91f..6a1547b270fe 100644 --- a/net/rxrpc/sendmsg.c +++ b/net/rxrpc/sendmsg.c @@ -176,7 +176,7 @@ static int rxrpc_queue_packet(struct rxrpc_sock *rx, struct rxrpc_call *call, skb->tstamp = ktime_get_real(); ix = seq & RXRPC_RXTX_BUFF_MASK; - rxrpc_get_skb(skb, rxrpc_skb_tx_got); + rxrpc_get_skb(skb, rxrpc_skb_got); call->rxtx_annotations[ix] = annotation; smp_wmb(); call->rxtx_buffer[ix] = skb; @@ -248,7 +248,7 @@ static int rxrpc_queue_packet(struct rxrpc_sock *rx, struct rxrpc_call *call, } out: - rxrpc_free_skb(skb, rxrpc_skb_tx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); _leave(" = %d", ret); return ret; } @@ -289,7 +289,7 @@ static int rxrpc_send_data(struct rxrpc_sock *rx, skb = call->tx_pending; call->tx_pending = NULL; - rxrpc_see_skb(skb, rxrpc_skb_tx_seen); + rxrpc_see_skb(skb, rxrpc_skb_seen); copied = 0; do { @@ -338,7 +338,7 @@ static int rxrpc_send_data(struct rxrpc_sock *rx, sp = rxrpc_skb(skb); sp->rx_flags |= RXRPC_SKB_TX_BUFFER; - rxrpc_new_skb(skb, rxrpc_skb_tx_new); + rxrpc_new_skb(skb, rxrpc_skb_new); _debug("ALLOC SEND %p", skb); @@ -440,7 +440,7 @@ out: return ret; call_terminated: - rxrpc_free_skb(skb, rxrpc_skb_tx_freed); + rxrpc_free_skb(skb, rxrpc_skb_freed); _leave(" = %d", call->error); return call->error; diff --git a/net/rxrpc/skbuff.c b/net/rxrpc/skbuff.c index 9ad5045b7c2f..8e6f45f84b9b 100644 --- a/net/rxrpc/skbuff.c +++ b/net/rxrpc/skbuff.c @@ -14,7 +14,8 @@ #include #include "ar-internal.h" -#define select_skb_count(op) (op >= rxrpc_skb_tx_cleaned ? &rxrpc_n_tx_skbs : &rxrpc_n_rx_skbs) +#define is_tx_skb(skb) (rxrpc_skb(skb)->rx_flags & RXRPC_SKB_TX_BUFFER) +#define select_skb_count(skb) (is_tx_skb(skb) ? &rxrpc_n_tx_skbs : &rxrpc_n_rx_skbs) /* * Note the allocation or reception of a socket buffer. @@ -22,7 +23,7 @@ void rxrpc_new_skb(struct sk_buff *skb, enum rxrpc_skb_trace op) { const void *here = __builtin_return_address(0); - int n = atomic_inc_return(select_skb_count(op)); + int n = atomic_inc_return(select_skb_count(skb)); trace_rxrpc_skb(skb, op, refcount_read(&skb->users), n, here); } @@ -33,7 +34,7 @@ void rxrpc_see_skb(struct sk_buff *skb, enum rxrpc_skb_trace op) { const void *here = __builtin_return_address(0); if (skb) { - int n = atomic_read(select_skb_count(op)); + int n = atomic_read(select_skb_count(skb)); trace_rxrpc_skb(skb, op, refcount_read(&skb->users), n, here); } } @@ -44,7 +45,7 @@ void rxrpc_see_skb(struct sk_buff *skb, enum rxrpc_skb_trace op) void rxrpc_get_skb(struct sk_buff *skb, enum rxrpc_skb_trace op) { const void *here = __builtin_return_address(0); - int n = atomic_inc_return(select_skb_count(op)); + int n = atomic_inc_return(select_skb_count(skb)); trace_rxrpc_skb(skb, op, refcount_read(&skb->users), n, here); skb_get(skb); } @@ -58,7 +59,7 @@ void rxrpc_free_skb(struct sk_buff *skb, enum rxrpc_skb_trace op) if (skb) { int n; CHECK_SLAB_OKAY(&skb->users); - n = atomic_dec_return(select_skb_count(op)); + n = atomic_dec_return(select_skb_count(skb)); trace_rxrpc_skb(skb, op, refcount_read(&skb->users), n, here); kfree_skb(skb); } @@ -72,8 +73,8 @@ void rxrpc_purge_queue(struct sk_buff_head *list) const void *here = __builtin_return_address(0); struct sk_buff *skb; while ((skb = skb_dequeue((list))) != NULL) { - int n = atomic_dec_return(select_skb_count(rxrpc_skb_rx_purged)); - trace_rxrpc_skb(skb, rxrpc_skb_rx_purged, + int n = atomic_dec_return(select_skb_count(skb)); + trace_rxrpc_skb(skb, rxrpc_skb_purged, refcount_read(&skb->users), n, here); kfree_skb(skb); } -- cgit v1.2.3 From d0d5c0cd1e711c98703f3544c1e6fc1372898de5 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 27 Aug 2019 10:13:46 +0100 Subject: rxrpc: Use skb_unshare() rather than skb_cow_data() The in-place decryption routines in AF_RXRPC's rxkad security module currently call skb_cow_data() to make sure the data isn't shared and that the skb can be written over. This has a problem, however, as the softirq handler may be still holding a ref or the Rx ring may be holding multiple refs when skb_cow_data() is called in rxkad_verify_packet() - and so skb_shared() returns true and __pskb_pull_tail() dislikes that. If this occurs, something like the following report will be generated. kernel BUG at net/core/skbuff.c:1463! ... RIP: 0010:pskb_expand_head+0x253/0x2b0 ... Call Trace: __pskb_pull_tail+0x49/0x460 skb_cow_data+0x6f/0x300 rxkad_verify_packet+0x18b/0xb10 [rxrpc] rxrpc_recvmsg_data.isra.11+0x4a8/0xa10 [rxrpc] rxrpc_kernel_recv_data+0x126/0x240 [rxrpc] afs_extract_data+0x51/0x2d0 [kafs] afs_deliver_fs_fetch_data+0x188/0x400 [kafs] afs_deliver_to_call+0xac/0x430 [kafs] afs_wait_for_call_to_complete+0x22f/0x3d0 [kafs] afs_make_call+0x282/0x3f0 [kafs] afs_fs_fetch_data+0x164/0x300 [kafs] afs_fetch_data+0x54/0x130 [kafs] afs_readpages+0x20d/0x340 [kafs] read_pages+0x66/0x180 __do_page_cache_readahead+0x188/0x1a0 ondemand_readahead+0x17d/0x2e0 generic_file_read_iter+0x740/0xc10 __vfs_read+0x145/0x1a0 vfs_read+0x8c/0x140 ksys_read+0x4a/0xb0 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by using skb_unshare() instead in the input path for DATA packets that have a security index != 0. Non-DATA packets don't need in-place encryption and neither do unencrypted DATA packets. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Reported-by: Julian Wollrath Signed-off-by: David Howells --- include/trace/events/rxrpc.h | 12 ++++++++---- net/rxrpc/ar-internal.h | 1 + net/rxrpc/input.c | 18 ++++++++++++++++++ net/rxrpc/rxkad.c | 32 +++++++++----------------------- net/rxrpc/skbuff.c | 25 ++++++++++++++++++++----- 5 files changed, 56 insertions(+), 32 deletions(-) diff --git a/include/trace/events/rxrpc.h b/include/trace/events/rxrpc.h index e2356c51883b..a13a62db3565 100644 --- a/include/trace/events/rxrpc.h +++ b/include/trace/events/rxrpc.h @@ -32,6 +32,8 @@ enum rxrpc_skb_trace { rxrpc_skb_received, rxrpc_skb_rotated, rxrpc_skb_seen, + rxrpc_skb_unshared, + rxrpc_skb_unshared_nomem, }; enum rxrpc_local_trace { @@ -231,7 +233,9 @@ enum rxrpc_tx_point { EM(rxrpc_skb_purged, "PUR") \ EM(rxrpc_skb_received, "RCV") \ EM(rxrpc_skb_rotated, "ROT") \ - E_(rxrpc_skb_seen, "SEE") + EM(rxrpc_skb_seen, "SEE") \ + EM(rxrpc_skb_unshared, "UNS") \ + E_(rxrpc_skb_unshared_nomem, "US0") #define rxrpc_local_traces \ EM(rxrpc_local_got, "GOT") \ @@ -633,9 +637,9 @@ TRACE_EVENT(rxrpc_call, TRACE_EVENT(rxrpc_skb, TP_PROTO(struct sk_buff *skb, enum rxrpc_skb_trace op, - int usage, int mod_count, const void *where), + int usage, int mod_count, u8 flags, const void *where), - TP_ARGS(skb, op, usage, mod_count, where), + TP_ARGS(skb, op, usage, mod_count, flags, where), TP_STRUCT__entry( __field(struct sk_buff *, skb ) @@ -648,7 +652,7 @@ TRACE_EVENT(rxrpc_skb, TP_fast_assign( __entry->skb = skb; - __entry->flags = rxrpc_skb(skb)->rx_flags; + __entry->flags = flags; __entry->op = op; __entry->usage = usage; __entry->mod_count = mod_count; diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h index 2d5294f3e62f..852e58781fda 100644 --- a/net/rxrpc/ar-internal.h +++ b/net/rxrpc/ar-internal.h @@ -1110,6 +1110,7 @@ void rxrpc_kernel_data_consumed(struct rxrpc_call *, struct sk_buff *); void rxrpc_packet_destructor(struct sk_buff *); void rxrpc_new_skb(struct sk_buff *, enum rxrpc_skb_trace); void rxrpc_see_skb(struct sk_buff *, enum rxrpc_skb_trace); +void rxrpc_eaten_skb(struct sk_buff *, enum rxrpc_skb_trace); void rxrpc_get_skb(struct sk_buff *, enum rxrpc_skb_trace); void rxrpc_free_skb(struct sk_buff *, enum rxrpc_skb_trace); void rxrpc_purge_queue(struct sk_buff_head *); diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c index 31090bdf1fae..d122c53c8697 100644 --- a/net/rxrpc/input.c +++ b/net/rxrpc/input.c @@ -1249,6 +1249,24 @@ int rxrpc_input_packet(struct sock *udp_sk, struct sk_buff *skb) goto bad_message; if (!rxrpc_validate_data(skb)) goto bad_message; + + /* Unshare the packet so that it can be modified for in-place + * decryption. + */ + if (sp->hdr.securityIndex != 0) { + struct sk_buff *nskb = skb_unshare(skb, GFP_ATOMIC); + if (!nskb) { + rxrpc_eaten_skb(skb, rxrpc_skb_unshared_nomem); + goto out; + } + + if (nskb != skb) { + rxrpc_eaten_skb(skb, rxrpc_skb_received); + rxrpc_new_skb(skb, rxrpc_skb_unshared); + skb = nskb; + sp = rxrpc_skb(skb); + } + } break; case RXRPC_PACKET_TYPE_CHALLENGE: diff --git a/net/rxrpc/rxkad.c b/net/rxrpc/rxkad.c index ae8cd8926456..c60c520fde7c 100644 --- a/net/rxrpc/rxkad.c +++ b/net/rxrpc/rxkad.c @@ -187,10 +187,8 @@ static int rxkad_secure_packet_encrypt(const struct rxrpc_call *call, struct rxrpc_skb_priv *sp; struct rxrpc_crypt iv; struct scatterlist sg[16]; - struct sk_buff *trailer; unsigned int len; u16 check; - int nsg; int err; sp = rxrpc_skb(skb); @@ -214,15 +212,14 @@ static int rxkad_secure_packet_encrypt(const struct rxrpc_call *call, crypto_skcipher_encrypt(req); /* we want to encrypt the skbuff in-place */ - nsg = skb_cow_data(skb, 0, &trailer); - err = -ENOMEM; - if (nsg < 0 || nsg > 16) + err = -EMSGSIZE; + if (skb_shinfo(skb)->nr_frags > 16) goto out; len = data_size + call->conn->size_align - 1; len &= ~(call->conn->size_align - 1); - sg_init_table(sg, nsg); + sg_init_table(sg, ARRAY_SIZE(sg)); err = skb_to_sgvec(skb, sg, 0, len); if (unlikely(err < 0)) goto out; @@ -319,11 +316,10 @@ static int rxkad_verify_packet_1(struct rxrpc_call *call, struct sk_buff *skb, struct rxkad_level1_hdr sechdr; struct rxrpc_crypt iv; struct scatterlist sg[16]; - struct sk_buff *trailer; bool aborted; u32 data_size, buf; u16 check; - int nsg, ret; + int ret; _enter(""); @@ -336,11 +332,7 @@ static int rxkad_verify_packet_1(struct rxrpc_call *call, struct sk_buff *skb, /* Decrypt the skbuff in-place. TODO: We really want to decrypt * directly into the target buffer. */ - nsg = skb_cow_data(skb, 0, &trailer); - if (nsg < 0 || nsg > 16) - goto nomem; - - sg_init_table(sg, nsg); + sg_init_table(sg, ARRAY_SIZE(sg)); ret = skb_to_sgvec(skb, sg, offset, 8); if (unlikely(ret < 0)) return ret; @@ -388,10 +380,6 @@ protocol_error: if (aborted) rxrpc_send_abort_packet(call); return -EPROTO; - -nomem: - _leave(" = -ENOMEM"); - return -ENOMEM; } /* @@ -406,7 +394,6 @@ static int rxkad_verify_packet_2(struct rxrpc_call *call, struct sk_buff *skb, struct rxkad_level2_hdr sechdr; struct rxrpc_crypt iv; struct scatterlist _sg[4], *sg; - struct sk_buff *trailer; bool aborted; u32 data_size, buf; u16 check; @@ -423,12 +410,11 @@ static int rxkad_verify_packet_2(struct rxrpc_call *call, struct sk_buff *skb, /* Decrypt the skbuff in-place. TODO: We really want to decrypt * directly into the target buffer. */ - nsg = skb_cow_data(skb, 0, &trailer); - if (nsg < 0) - goto nomem; - sg = _sg; - if (unlikely(nsg > 4)) { + nsg = skb_shinfo(skb)->nr_frags; + if (nsg <= 4) { + nsg = 4; + } else { sg = kmalloc_array(nsg, sizeof(*sg), GFP_NOIO); if (!sg) goto nomem; diff --git a/net/rxrpc/skbuff.c b/net/rxrpc/skbuff.c index 8e6f45f84b9b..0348d2bf6f7d 100644 --- a/net/rxrpc/skbuff.c +++ b/net/rxrpc/skbuff.c @@ -24,7 +24,8 @@ void rxrpc_new_skb(struct sk_buff *skb, enum rxrpc_skb_trace op) { const void *here = __builtin_return_address(0); int n = atomic_inc_return(select_skb_count(skb)); - trace_rxrpc_skb(skb, op, refcount_read(&skb->users), n, here); + trace_rxrpc_skb(skb, op, refcount_read(&skb->users), n, + rxrpc_skb(skb)->rx_flags, here); } /* @@ -35,7 +36,8 @@ void rxrpc_see_skb(struct sk_buff *skb, enum rxrpc_skb_trace op) const void *here = __builtin_return_address(0); if (skb) { int n = atomic_read(select_skb_count(skb)); - trace_rxrpc_skb(skb, op, refcount_read(&skb->users), n, here); + trace_rxrpc_skb(skb, op, refcount_read(&skb->users), n, + rxrpc_skb(skb)->rx_flags, here); } } @@ -46,10 +48,21 @@ void rxrpc_get_skb(struct sk_buff *skb, enum rxrpc_skb_trace op) { const void *here = __builtin_return_address(0); int n = atomic_inc_return(select_skb_count(skb)); - trace_rxrpc_skb(skb, op, refcount_read(&skb->users), n, here); + trace_rxrpc_skb(skb, op, refcount_read(&skb->users), n, + rxrpc_skb(skb)->rx_flags, here); skb_get(skb); } +/* + * Note the dropping of a ref on a socket buffer by the core. + */ +void rxrpc_eaten_skb(struct sk_buff *skb, enum rxrpc_skb_trace op) +{ + const void *here = __builtin_return_address(0); + int n = atomic_inc_return(&rxrpc_n_rx_skbs); + trace_rxrpc_skb(skb, op, 0, n, 0, here); +} + /* * Note the destruction of a socket buffer. */ @@ -60,7 +73,8 @@ void rxrpc_free_skb(struct sk_buff *skb, enum rxrpc_skb_trace op) int n; CHECK_SLAB_OKAY(&skb->users); n = atomic_dec_return(select_skb_count(skb)); - trace_rxrpc_skb(skb, op, refcount_read(&skb->users), n, here); + trace_rxrpc_skb(skb, op, refcount_read(&skb->users), n, + rxrpc_skb(skb)->rx_flags, here); kfree_skb(skb); } } @@ -75,7 +89,8 @@ void rxrpc_purge_queue(struct sk_buff_head *list) while ((skb = skb_dequeue((list))) != NULL) { int n = atomic_dec_return(select_skb_count(skb)); trace_rxrpc_skb(skb, rxrpc_skb_purged, - refcount_read(&skb->users), n, here); + refcount_read(&skb->users), n, + rxrpc_skb(skb)->rx_flags, here); kfree_skb(skb); } } -- cgit v1.2.3 From 3cf2f450fff304be9cf4868bf0df17f253bc5b1c Mon Sep 17 00:00:00 2001 From: Todd Seidelmann Date: Wed, 21 Aug 2019 11:47:53 -0400 Subject: netfilter: xt_physdev: Fix spurious error message in physdev_mt_check Simplify the check in physdev_mt_check() to emit an error message only when passed an invalid chain (ie, NF_INET_LOCAL_OUT). This avoids cluttering up the log with errors against valid rules. For large/heavily modified rulesets, current behavior can quickly overwhelm the ring buffer, because this function gets called on every change, regardless of the rule that was changed. Signed-off-by: Todd Seidelmann Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/xt_physdev.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/netfilter/xt_physdev.c b/net/netfilter/xt_physdev.c index ead7c6022208..b92b22ce8abd 100644 --- a/net/netfilter/xt_physdev.c +++ b/net/netfilter/xt_physdev.c @@ -101,11 +101,9 @@ static int physdev_mt_check(const struct xt_mtchk_param *par) if (info->bitmask & (XT_PHYSDEV_OP_OUT | XT_PHYSDEV_OP_ISOUT) && (!(info->bitmask & XT_PHYSDEV_OP_BRIDGED) || info->invert & XT_PHYSDEV_OP_BRIDGED) && - par->hook_mask & ((1 << NF_INET_LOCAL_OUT) | - (1 << NF_INET_FORWARD) | (1 << NF_INET_POST_ROUTING))) { + par->hook_mask & (1 << NF_INET_LOCAL_OUT)) { pr_info_ratelimited("--physdev-out and --physdev-is-out only supported in the FORWARD and POSTROUTING chains with bridged traffic\n"); - if (par->hook_mask & (1 << NF_INET_LOCAL_OUT)) - return -EINVAL; + return -EINVAL; } if (!brnf_probed) { -- cgit v1.2.3 From 3a069024d371125227de3ac8fa74223fcf473520 Mon Sep 17 00:00:00 2001 From: Thomas Jarosch Date: Wed, 21 Aug 2019 16:14:28 +0200 Subject: netfilter: nf_conntrack_ftp: Fix debug output The find_pattern() debug output was printing the 'skip' character. This can be a NULL-byte and messes up further pr_debug() output. Output without the fix: kernel: nf_conntrack_ftp: Pattern matches! kernel: nf_conntrack_ftp: Skipped up to `<7>nf_conntrack_ftp: find_pattern `PORT': dlen = 8 kernel: nf_conntrack_ftp: find_pattern `EPRT': dlen = 8 Output with the fix: kernel: nf_conntrack_ftp: Pattern matches! kernel: nf_conntrack_ftp: Skipped up to 0x0 delimiter! kernel: nf_conntrack_ftp: Match succeeded! kernel: nf_conntrack_ftp: conntrack_ftp: match `172,17,0,100,200,207' (20 bytes at 4150681645) kernel: nf_conntrack_ftp: find_pattern `PORT': dlen = 8 Signed-off-by: Thomas Jarosch Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_ftp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_ftp.c b/net/netfilter/nf_conntrack_ftp.c index 0ecb3e289ef2..8d96738b7dfd 100644 --- a/net/netfilter/nf_conntrack_ftp.c +++ b/net/netfilter/nf_conntrack_ftp.c @@ -322,7 +322,7 @@ static int find_pattern(const char *data, size_t dlen, i++; } - pr_debug("Skipped up to `%c'!\n", skip); + pr_debug("Skipped up to 0x%hhx delimiter!\n", skip); *numoff = i; *numlen = getnum(data + i, dlen - i, cmd, term, numoff); -- cgit v1.2.3 From 2a1a3fa0f29270583f0e6e3100d609e09697add1 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sat, 24 Aug 2019 14:12:31 +0100 Subject: kallsyms: Don't let kallsyms_lookup_size_offset() fail on retrieving the first symbol An arm64 kernel configured with CONFIG_KPROBES=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_BASE_RELATIVE=y reports the following kprobe failure: [ 0.032677] kprobes: failed to populate blacklist: -22 [ 0.033376] Please take care of using kprobes. It appears that kprobe fails to retrieve the symbol at address 0xffff000010081000, despite this symbol being in System.map: ffff000010081000 T __exception_text_start This symbol is part of the first group of aliases in the kallsyms_offsets array (symbol names generated using ugly hacks in scripts/kallsyms.c): kallsyms_offsets: .long 0x1000 // do_undefinstr .long 0x1000 // efi_header_end .long 0x1000 // _stext .long 0x1000 // __exception_text_start .long 0x12b0 // do_cp15instr Looking at the implementation of get_symbol_pos(), it returns the lowest index for aliasing symbols. In this case, it return 0. But kallsyms_lookup_size_offset() considers 0 as a failure, which is obviously wrong (there is definitely a valid symbol living there). In turn, the kprobe blacklisting stops abruptly, hence the original error. A CONFIG_KALLSYMS_ALL kernel wouldn't fail as there is always some random symbols at the beginning of this array, which are never looked up via kallsyms_lookup_size_offset. Fix it by considering that get_symbol_pos() is always successful (which is consistent with the other uses of this function). Fixes: ffc5089196446 ("[PATCH] Create kallsyms_lookup_size_offset()") Reviewed-by: Masami Hiramatsu Cc: Arnaldo Carvalho de Melo Cc: Peter Zijlstra Cc: Will Deacon Cc: Catalin Marinas Signed-off-by: Marc Zyngier Signed-off-by: Will Deacon --- kernel/kallsyms.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c index 95a260f9214b..136ce049c4ad 100644 --- a/kernel/kallsyms.c +++ b/kernel/kallsyms.c @@ -263,8 +263,10 @@ int kallsyms_lookup_size_offset(unsigned long addr, unsigned long *symbolsize, { char namebuf[KSYM_NAME_LEN]; - if (is_ksym_addr(addr)) - return !!get_symbol_pos(addr, symbolsize, offset); + if (is_ksym_addr(addr)) { + get_symbol_pos(addr, symbolsize, offset); + return 1; + } return !!module_address_lookup(addr, symbolsize, offset, NULL, namebuf) || !!__bpf_address_lookup(addr, symbolsize, offset, namebuf); } -- cgit v1.2.3 From d4a8061a7c5f7c27a2dc002ee4cb89b3e6637e44 Mon Sep 17 00:00:00 2001 From: Heyi Guo Date: Tue, 27 Aug 2019 12:26:50 +0100 Subject: KVM: arm/arm64: vgic: Fix potential deadlock when ap_list is long If the ap_list is longer than 256 entries, merge_final() in list_sort() will call the comparison callback with the same element twice, causing a deadlock in vgic_irq_cmp(). Fix it by returning early when irqa == irqb. Cc: stable@vger.kernel.org # 4.7+ Fixes: 8e4447457965 ("KVM: arm/arm64: vgic-new: Add IRQ sorting") Signed-off-by: Zenghui Yu Signed-off-by: Heyi Guo [maz: massaged commit log and patch, added Fixes and Cc-stable] Signed-off-by: Marc Zyngier Signed-off-by: Will Deacon --- virt/kvm/arm/vgic/vgic.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/virt/kvm/arm/vgic/vgic.c b/virt/kvm/arm/vgic/vgic.c index 04786c8ec77e..ca5e6c6866a4 100644 --- a/virt/kvm/arm/vgic/vgic.c +++ b/virt/kvm/arm/vgic/vgic.c @@ -254,6 +254,13 @@ static int vgic_irq_cmp(void *priv, struct list_head *a, struct list_head *b) bool penda, pendb; int ret; + /* + * list_sort may call this function with the same element when + * the list is fairly long. + */ + if (unlikely(irqa == irqb)) + return 0; + raw_spin_lock(&irqa->irq_lock); raw_spin_lock_nested(&irqb->irq_lock, SINGLE_DEPTH_NESTING); -- cgit v1.2.3 From 478553fd1b6f819390b64a2e13ac756c4d1a2836 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 27 Aug 2019 13:24:52 +0200 Subject: netfilter: conntrack: make sysctls per-namespace again When I merged the extension sysctl tables with the main one I forgot to reset them on netns creation. They currently read/write init_net settings. Fixes: d912dec12428 ("netfilter: conntrack: merge acct and helper sysctl table with main one") Fixes: cb2833ed0044 ("netfilter: conntrack: merge ecache and timestamp sysctl tables with main one") Reported-by: Shmulik Ladkani Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_standalone.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c index e0d392cb3075..0006503d2da9 100644 --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c @@ -1037,8 +1037,13 @@ static int nf_conntrack_standalone_init_sysctl(struct net *net) table[NF_SYSCTL_CT_COUNT].data = &net->ct.count; table[NF_SYSCTL_CT_CHECKSUM].data = &net->ct.sysctl_checksum; table[NF_SYSCTL_CT_LOG_INVALID].data = &net->ct.sysctl_log_invalid; + table[NF_SYSCTL_CT_ACCT].data = &net->ct.sysctl_acct; + table[NF_SYSCTL_CT_HELPER].data = &net->ct.sysctl_auto_assign_helper; #ifdef CONFIG_NF_CONNTRACK_EVENTS table[NF_SYSCTL_CT_EVENTS].data = &net->ct.sysctl_events; +#endif +#ifdef CONFIG_NF_CONNTRACK_TIMESTAMP + table[NF_SYSCTL_CT_TIMESTAMP].data = &net->ct.sysctl_tstamp; #endif table[NF_SYSCTL_CT_PROTO_TIMEOUT_GENERIC].data = &nf_generic_pernet(net)->timeout; table[NF_SYSCTL_CT_PROTO_TIMEOUT_ICMP].data = &nf_icmp_pernet(net)->timeout; -- cgit v1.2.3 From 83e09d5bddbee749fc83063890244397896a1971 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Mon, 19 Aug 2019 13:17:53 +0800 Subject: drm/amd/powerplay: correct Vega20 dpm level related settings Correct the settings for auto mode and skip the unnecessary settings for dcefclk and fclk. Signed-off-by: Evan Quan Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 60 +++++++++++++++++++--- 1 file changed, 54 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c index 81658dc8fafc..90c4e87ac5ad 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c @@ -2353,12 +2353,16 @@ static int vega20_force_dpm_highest(struct pp_hwmgr *hwmgr) data->dpm_table.soc_table.dpm_state.soft_max_level = data->dpm_table.soc_table.dpm_levels[soft_level].value; - ret = vega20_upload_dpm_min_level(hwmgr, 0xFFFFFFFF); + ret = vega20_upload_dpm_min_level(hwmgr, FEATURE_DPM_GFXCLK_MASK | + FEATURE_DPM_UCLK_MASK | + FEATURE_DPM_SOCCLK_MASK); PP_ASSERT_WITH_CODE(!ret, "Failed to upload boot level to highest!", return ret); - ret = vega20_upload_dpm_max_level(hwmgr, 0xFFFFFFFF); + ret = vega20_upload_dpm_max_level(hwmgr, FEATURE_DPM_GFXCLK_MASK | + FEATURE_DPM_UCLK_MASK | + FEATURE_DPM_SOCCLK_MASK); PP_ASSERT_WITH_CODE(!ret, "Failed to upload dpm max level to highest!", return ret); @@ -2391,12 +2395,16 @@ static int vega20_force_dpm_lowest(struct pp_hwmgr *hwmgr) data->dpm_table.soc_table.dpm_state.soft_max_level = data->dpm_table.soc_table.dpm_levels[soft_level].value; - ret = vega20_upload_dpm_min_level(hwmgr, 0xFFFFFFFF); + ret = vega20_upload_dpm_min_level(hwmgr, FEATURE_DPM_GFXCLK_MASK | + FEATURE_DPM_UCLK_MASK | + FEATURE_DPM_SOCCLK_MASK); PP_ASSERT_WITH_CODE(!ret, "Failed to upload boot level to highest!", return ret); - ret = vega20_upload_dpm_max_level(hwmgr, 0xFFFFFFFF); + ret = vega20_upload_dpm_max_level(hwmgr, FEATURE_DPM_GFXCLK_MASK | + FEATURE_DPM_UCLK_MASK | + FEATURE_DPM_SOCCLK_MASK); PP_ASSERT_WITH_CODE(!ret, "Failed to upload dpm max level to highest!", return ret); @@ -2407,14 +2415,54 @@ static int vega20_force_dpm_lowest(struct pp_hwmgr *hwmgr) static int vega20_unforce_dpm_levels(struct pp_hwmgr *hwmgr) { + struct vega20_hwmgr *data = + (struct vega20_hwmgr *)(hwmgr->backend); + uint32_t soft_min_level, soft_max_level; int ret = 0; - ret = vega20_upload_dpm_min_level(hwmgr, 0xFFFFFFFF); + /* gfxclk soft min/max settings */ + soft_min_level = + vega20_find_lowest_dpm_level(&(data->dpm_table.gfx_table)); + soft_max_level = + vega20_find_highest_dpm_level(&(data->dpm_table.gfx_table)); + + data->dpm_table.gfx_table.dpm_state.soft_min_level = + data->dpm_table.gfx_table.dpm_levels[soft_min_level].value; + data->dpm_table.gfx_table.dpm_state.soft_max_level = + data->dpm_table.gfx_table.dpm_levels[soft_max_level].value; + + /* uclk soft min/max settings */ + soft_min_level = + vega20_find_lowest_dpm_level(&(data->dpm_table.mem_table)); + soft_max_level = + vega20_find_highest_dpm_level(&(data->dpm_table.mem_table)); + + data->dpm_table.mem_table.dpm_state.soft_min_level = + data->dpm_table.mem_table.dpm_levels[soft_min_level].value; + data->dpm_table.mem_table.dpm_state.soft_max_level = + data->dpm_table.mem_table.dpm_levels[soft_max_level].value; + + /* socclk soft min/max settings */ + soft_min_level = + vega20_find_lowest_dpm_level(&(data->dpm_table.soc_table)); + soft_max_level = + vega20_find_highest_dpm_level(&(data->dpm_table.soc_table)); + + data->dpm_table.soc_table.dpm_state.soft_min_level = + data->dpm_table.soc_table.dpm_levels[soft_min_level].value; + data->dpm_table.soc_table.dpm_state.soft_max_level = + data->dpm_table.soc_table.dpm_levels[soft_max_level].value; + + ret = vega20_upload_dpm_min_level(hwmgr, FEATURE_DPM_GFXCLK_MASK | + FEATURE_DPM_UCLK_MASK | + FEATURE_DPM_SOCCLK_MASK); PP_ASSERT_WITH_CODE(!ret, "Failed to upload DPM Bootup Levels!", return ret); - ret = vega20_upload_dpm_max_level(hwmgr, 0xFFFFFFFF); + ret = vega20_upload_dpm_max_level(hwmgr, FEATURE_DPM_GFXCLK_MASK | + FEATURE_DPM_UCLK_MASK | + FEATURE_DPM_SOCCLK_MASK); PP_ASSERT_WITH_CODE(!ret, "Failed to upload DPM Max Levels!", return ret); -- cgit v1.2.3 From 317a3aaef94d73ba6be88aea11b41bb631b2d581 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Tue, 27 Aug 2019 17:33:32 +0800 Subject: drm/amdgpu: Add APTX quirk for Dell Latitude 5495 Needs ATPX rather than _PR3 to really turn off the dGPU. This can save ~5W when dGPU is runtime-suspended. Signed-off-by: Kai-Heng Feng Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c index 9b384a94d2f3..3e35a8f2c5e5 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c @@ -574,6 +574,7 @@ static const struct amdgpu_px_quirk amdgpu_px_quirk_list[] = { { 0x1002, 0x6900, 0x1002, 0x0124, AMDGPU_PX_QUIRK_FORCE_ATPX }, { 0x1002, 0x6900, 0x1028, 0x0812, AMDGPU_PX_QUIRK_FORCE_ATPX }, { 0x1002, 0x6900, 0x1028, 0x0813, AMDGPU_PX_QUIRK_FORCE_ATPX }, + { 0x1002, 0x699f, 0x1028, 0x0814, AMDGPU_PX_QUIRK_FORCE_ATPX }, { 0x1002, 0x6900, 0x1025, 0x125A, AMDGPU_PX_QUIRK_FORCE_ATPX }, { 0x1002, 0x6900, 0x17AA, 0x3806, AMDGPU_PX_QUIRK_FORCE_ATPX }, { 0, 0, 0, 0, 0 }, -- cgit v1.2.3 From 41940ff50f6c347f3541163702566cd526200d98 Mon Sep 17 00:00:00 2001 From: Aaron Liu Date: Tue, 27 Aug 2019 22:59:45 +0800 Subject: drm/amdgpu: fix GFXOFF on Picasso and Raven2 For picasso(adev->pdev->device == 0x15d8)&raven2(adev->rev_id >= 0x8), firmware is sufficient to support gfxoff. In commit 98f58ada2d37e, for picasso&raven2, return directly and cause gfxoff disabled. Fixes: 98f58ada2d37 ("drm/amdgpu/gfx9: update pg_flags after determining if gfx off is possible") Reviewed-by: Huang Rui Reviewed-by: Alex Deucher Signed-off-by: Aaron Liu Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index 4ea67f94cae2..c066e1d3f981 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -596,14 +596,14 @@ static void gfx_v9_0_check_if_need_gfxoff(struct amdgpu_device *adev) case CHIP_VEGA20: break; case CHIP_RAVEN: - if (adev->rev_id >= 0x8 || adev->pdev->device == 0x15d8) - break; - if ((adev->gfx.rlc_fw_version != 106 && - adev->gfx.rlc_fw_version < 531) || - (adev->gfx.rlc_fw_version == 53815) || - (adev->gfx.rlc_feature_version < 1) || - !adev->gfx.rlc.is_rlc_v2_1) + if (!(adev->rev_id >= 0x8 || adev->pdev->device == 0x15d8) + &&((adev->gfx.rlc_fw_version != 106 && + adev->gfx.rlc_fw_version < 531) || + (adev->gfx.rlc_fw_version == 53815) || + (adev->gfx.rlc_feature_version < 1) || + !adev->gfx.rlc.is_rlc_v2_1)) adev->pm.pp_feature &= ~PP_GFXOFF_MASK; + if (adev->pm.pp_feature & PP_GFXOFF_MASK) adev->pg_flags |= AMD_PG_SUPPORT_GFX_PG | AMD_PG_SUPPORT_CP | -- cgit v1.2.3 From ea1529873ab18c204688cf31746df851c098cbea Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Tue, 27 Aug 2019 18:04:02 +0200 Subject: KVM: x86: hyper-v: don't crash on KVM_GET_SUPPORTED_HV_CPUID when kvm_intel.nested is disabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If kvm_intel is loaded with nested=0 parameter an attempt to perform KVM_GET_SUPPORTED_HV_CPUID results in OOPS as nested_get_evmcs_version hook in kvm_x86_ops is NULL (we assign it in nested_vmx_hardware_setup() and this only happens in case nested is enabled). Check that kvm_x86_ops->nested_get_evmcs_version is not NULL before calling it. With this, we can remove the stub from svm as it is no longer needed. Cc: Fixes: e2e871ab2f02 ("x86/kvm/hyper-v: Introduce nested_get_evmcs_version() helper") Signed-off-by: Vitaly Kuznetsov Reviewed-by: Jim Mattson Signed-off-by: Radim Krčmář --- arch/x86/kvm/hyperv.c | 5 ++++- arch/x86/kvm/svm.c | 8 +------- arch/x86/kvm/vmx/vmx.c | 1 + 3 files changed, 6 insertions(+), 8 deletions(-) diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c index c10a8b10b203..fff790a3f4ee 100644 --- a/arch/x86/kvm/hyperv.c +++ b/arch/x86/kvm/hyperv.c @@ -1781,7 +1781,7 @@ int kvm_vm_ioctl_hv_eventfd(struct kvm *kvm, struct kvm_hyperv_eventfd *args) int kvm_vcpu_ioctl_get_hv_cpuid(struct kvm_vcpu *vcpu, struct kvm_cpuid2 *cpuid, struct kvm_cpuid_entry2 __user *entries) { - uint16_t evmcs_ver = kvm_x86_ops->nested_get_evmcs_version(vcpu); + uint16_t evmcs_ver = 0; struct kvm_cpuid_entry2 cpuid_entries[] = { { .function = HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS }, { .function = HYPERV_CPUID_INTERFACE }, @@ -1793,6 +1793,9 @@ int kvm_vcpu_ioctl_get_hv_cpuid(struct kvm_vcpu *vcpu, struct kvm_cpuid2 *cpuid, }; int i, nent = ARRAY_SIZE(cpuid_entries); + if (kvm_x86_ops->nested_get_evmcs_version) + evmcs_ver = kvm_x86_ops->nested_get_evmcs_version(vcpu); + /* Skip NESTED_FEATURES if eVMCS is not supported */ if (!evmcs_ver) --nent; diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index e3d3b2128f2b..e0368076a1ef 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -7128,12 +7128,6 @@ failed: return ret; } -static uint16_t nested_get_evmcs_version(struct kvm_vcpu *vcpu) -{ - /* Not supported */ - return 0; -} - static int nested_enable_evmcs(struct kvm_vcpu *vcpu, uint16_t *vmcs_version) { @@ -7332,7 +7326,7 @@ static struct kvm_x86_ops svm_x86_ops __ro_after_init = { .mem_enc_unreg_region = svm_unregister_enc_region, .nested_enable_evmcs = nested_enable_evmcs, - .nested_get_evmcs_version = nested_get_evmcs_version, + .nested_get_evmcs_version = NULL, .need_emulation_on_page_fault = svm_need_emulation_on_page_fault, }; diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index 42ed3faa6af8..c030c96fc81a 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -7797,6 +7797,7 @@ static struct kvm_x86_ops vmx_x86_ops __ro_after_init = { .set_nested_state = NULL, .get_vmcs12_pages = NULL, .nested_enable_evmcs = NULL, + .nested_get_evmcs_version = NULL, .need_emulation_on_page_fault = vmx_need_emulation_on_page_fault, }; -- cgit v1.2.3 From 75ee23b30dc712d80d2421a9a547e7ab6e379b44 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Fri, 23 Aug 2019 13:55:44 -0700 Subject: KVM: x86: Don't update RIP or do single-step on faulting emulation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Don't advance RIP or inject a single-step #DB if emulation signals a fault. This logic applies to all state updates that are conditional on clean retirement of the emulation instruction, e.g. updating RFLAGS was previously handled by commit 38827dbd3fb85 ("KVM: x86: Do not update EFLAGS on faulting emulation"). Not advancing RIP is likely a nop, i.e. ctxt->eip isn't updated with ctxt->_eip until emulation "retires" anyways. Skipping #DB injection fixes a bug reported by Andy Lutomirski where a #UD on SYSCALL due to invalid state with EFLAGS.TF=1 would loop indefinitely due to emulation overwriting the #UD with #DB and thus restarting the bad SYSCALL over and over. Cc: Nadav Amit Cc: stable@vger.kernel.org Reported-by: Andy Lutomirski Fixes: 663f4c61b803 ("KVM: x86: handle singlestep during emulation") Signed-off-by: Sean Christopherson Signed-off-by: Radim Krčmář --- arch/x86/kvm/x86.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 93b0bd45ac73..290c3c3efb87 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6594,12 +6594,13 @@ restart: unsigned long rflags = kvm_x86_ops->get_rflags(vcpu); toggle_interruptibility(vcpu, ctxt->interruptibility); vcpu->arch.emulate_regs_need_sync_to_vcpu = false; - kvm_rip_write(vcpu, ctxt->eip); - if (r == EMULATE_DONE && ctxt->tf) - kvm_vcpu_do_singlestep(vcpu, &r); if (!ctxt->have_exception || - exception_type(ctxt->exception.vector) == EXCPT_TRAP) + exception_type(ctxt->exception.vector) == EXCPT_TRAP) { + kvm_rip_write(vcpu, ctxt->eip); + if (r == EMULATE_DONE && ctxt->tf) + kvm_vcpu_do_singlestep(vcpu, &r); __kvm_set_rflags(vcpu, ctxt->eflags); + } /* * For STI, interrupts are shadowed; so KVM_REQ_EVENT will -- cgit v1.2.3 From f2aee329a68f5a907bcff11a109dfe17c0b41aeb Mon Sep 17 00:00:00 2001 From: Ronnie Sahlberg Date: Thu, 22 Aug 2019 08:09:50 +1000 Subject: cifs: set domainName when a domain-key is used in multiuser RHBZ: 1710429 When we use a domain-key to authenticate using multiuser we must also set the domainnmame for the new volume as it will be used and passed to the server in the NTLMSSP Domain-name. Signed-off-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/cifs/connect.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 1795e80cbdf7..9d2576f31689 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2981,6 +2981,7 @@ static int cifs_set_cifscreds(struct smb_vol *vol, struct cifs_ses *ses) { int rc = 0; + int is_domain = 0; const char *delim, *payload; char *desc; ssize_t len; @@ -3028,6 +3029,7 @@ cifs_set_cifscreds(struct smb_vol *vol, struct cifs_ses *ses) rc = PTR_ERR(key); goto out_err; } + is_domain = 1; } down_read(&key->sem); @@ -3085,6 +3087,26 @@ cifs_set_cifscreds(struct smb_vol *vol, struct cifs_ses *ses) goto out_key_put; } + /* + * If we have a domain key then we must set the domainName in the + * for the request. + */ + if (is_domain && ses->domainName) { + vol->domainname = kstrndup(ses->domainName, + strlen(ses->domainName), + GFP_KERNEL); + if (!vol->domainname) { + cifs_dbg(FYI, "Unable to allocate %zd bytes for " + "domain\n", len); + rc = -ENOMEM; + kfree(vol->username); + vol->username = NULL; + kfree(vol->password); + vol->password = NULL; + goto out_key_put; + } + } + out_key_put: up_read(&key->sem); key_put(key); -- cgit v1.2.3 From 478228e57f81f6cb60798d54fc02a74ea7dd267e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 27 Aug 2019 13:59:17 +0300 Subject: cifs: Use kzfree() to zero out the password It's safer to zero out the password so that it can never be disclosed. Fixes: 0c219f5799c7 ("cifs: set domainName when a domain-key is used in multiuser") Signed-off-by: Dan Carpenter Signed-off-by: Steve French --- fs/cifs/connect.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 9d2576f31689..ddefddeffd06 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3101,7 +3101,7 @@ cifs_set_cifscreds(struct smb_vol *vol, struct cifs_ses *ses) rc = -ENOMEM; kfree(vol->username); vol->username = NULL; - kfree(vol->password); + kzfree(vol->password); vol->password = NULL; goto out_key_put; } -- cgit v1.2.3 From 981471bd3abf4d572097645d765391533aac327d Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Sun, 25 Aug 2019 10:01:32 -0700 Subject: net_sched: fix a NULL pointer deref in ipt action The net pointer in struct xt_tgdtor_param is not explicitly initialized therefore is still NULL when dereferencing it. So we have to find a way to pass the correct net pointer to ipt_destroy_target(). The best way I find is just saving the net pointer inside the per netns struct tcf_idrinfo, which could make this patch smaller. Fixes: 0c66dc1ea3f0 ("netfilter: conntrack: register hooks in netns when needed by ruleset") Reported-and-tested-by: itugrok@yahoo.com Cc: Jamal Hadi Salim Cc: Jiri Pirko Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- include/net/act_api.h | 4 +++- net/sched/act_bpf.c | 2 +- net/sched/act_connmark.c | 2 +- net/sched/act_csum.c | 2 +- net/sched/act_ct.c | 2 +- net/sched/act_ctinfo.c | 2 +- net/sched/act_gact.c | 2 +- net/sched/act_ife.c | 2 +- net/sched/act_ipt.c | 11 ++++++----- net/sched/act_mirred.c | 2 +- net/sched/act_mpls.c | 2 +- net/sched/act_nat.c | 2 +- net/sched/act_pedit.c | 2 +- net/sched/act_police.c | 2 +- net/sched/act_sample.c | 2 +- net/sched/act_simple.c | 2 +- net/sched/act_skbedit.c | 2 +- net/sched/act_skbmod.c | 2 +- net/sched/act_tunnel_key.c | 2 +- net/sched/act_vlan.c | 2 +- 20 files changed, 27 insertions(+), 24 deletions(-) diff --git a/include/net/act_api.h b/include/net/act_api.h index c61a1bf4e3de..3a1a72990fce 100644 --- a/include/net/act_api.h +++ b/include/net/act_api.h @@ -15,6 +15,7 @@ struct tcf_idrinfo { struct mutex lock; struct idr action_idr; + struct net *net; }; struct tc_action_ops; @@ -108,7 +109,7 @@ struct tc_action_net { }; static inline -int tc_action_net_init(struct tc_action_net *tn, +int tc_action_net_init(struct net *net, struct tc_action_net *tn, const struct tc_action_ops *ops) { int err = 0; @@ -117,6 +118,7 @@ int tc_action_net_init(struct tc_action_net *tn, if (!tn->idrinfo) return -ENOMEM; tn->ops = ops; + tn->idrinfo->net = net; mutex_init(&tn->idrinfo->lock); idr_init(&tn->idrinfo->action_idr); return err; diff --git a/net/sched/act_bpf.c b/net/sched/act_bpf.c index fd1f7e799e23..04b7bd4ec751 100644 --- a/net/sched/act_bpf.c +++ b/net/sched/act_bpf.c @@ -422,7 +422,7 @@ static __net_init int bpf_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, bpf_net_id); - return tc_action_net_init(tn, &act_bpf_ops); + return tc_action_net_init(net, tn, &act_bpf_ops); } static void __net_exit bpf_exit_net(struct list_head *net_list) diff --git a/net/sched/act_connmark.c b/net/sched/act_connmark.c index 32ac04d77a45..2b43cacf82af 100644 --- a/net/sched/act_connmark.c +++ b/net/sched/act_connmark.c @@ -231,7 +231,7 @@ static __net_init int connmark_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, connmark_net_id); - return tc_action_net_init(tn, &act_connmark_ops); + return tc_action_net_init(net, tn, &act_connmark_ops); } static void __net_exit connmark_exit_net(struct list_head *net_list) diff --git a/net/sched/act_csum.c b/net/sched/act_csum.c index 9b9288267a54..d3cfad88dc3a 100644 --- a/net/sched/act_csum.c +++ b/net/sched/act_csum.c @@ -714,7 +714,7 @@ static __net_init int csum_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, csum_net_id); - return tc_action_net_init(tn, &act_csum_ops); + return tc_action_net_init(net, tn, &act_csum_ops); } static void __net_exit csum_exit_net(struct list_head *net_list) diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c index 33a1a7406e87..cdd6f3818097 100644 --- a/net/sched/act_ct.c +++ b/net/sched/act_ct.c @@ -939,7 +939,7 @@ static __net_init int ct_init_net(struct net *net) tn->labels = true; } - return tc_action_net_init(&tn->tn, &act_ct_ops); + return tc_action_net_init(net, &tn->tn, &act_ct_ops); } static void __net_exit ct_exit_net(struct list_head *net_list) diff --git a/net/sched/act_ctinfo.c b/net/sched/act_ctinfo.c index 06ef74b74911..0dbcfd1dca7b 100644 --- a/net/sched/act_ctinfo.c +++ b/net/sched/act_ctinfo.c @@ -376,7 +376,7 @@ static __net_init int ctinfo_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, ctinfo_net_id); - return tc_action_net_init(tn, &act_ctinfo_ops); + return tc_action_net_init(net, tn, &act_ctinfo_ops); } static void __net_exit ctinfo_exit_net(struct list_head *net_list) diff --git a/net/sched/act_gact.c b/net/sched/act_gact.c index 8f0140c6ca58..324f1d1f6d47 100644 --- a/net/sched/act_gact.c +++ b/net/sched/act_gact.c @@ -278,7 +278,7 @@ static __net_init int gact_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, gact_net_id); - return tc_action_net_init(tn, &act_gact_ops); + return tc_action_net_init(net, tn, &act_gact_ops); } static void __net_exit gact_exit_net(struct list_head *net_list) diff --git a/net/sched/act_ife.c b/net/sched/act_ife.c index 92ee853d43e6..3a31e241c647 100644 --- a/net/sched/act_ife.c +++ b/net/sched/act_ife.c @@ -890,7 +890,7 @@ static __net_init int ife_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, ife_net_id); - return tc_action_net_init(tn, &act_ife_ops); + return tc_action_net_init(net, tn, &act_ife_ops); } static void __net_exit ife_exit_net(struct list_head *net_list) diff --git a/net/sched/act_ipt.c b/net/sched/act_ipt.c index ce2c30a591d2..214a03d405cf 100644 --- a/net/sched/act_ipt.c +++ b/net/sched/act_ipt.c @@ -61,12 +61,13 @@ static int ipt_init_target(struct net *net, struct xt_entry_target *t, return 0; } -static void ipt_destroy_target(struct xt_entry_target *t) +static void ipt_destroy_target(struct xt_entry_target *t, struct net *net) { struct xt_tgdtor_param par = { .target = t->u.kernel.target, .targinfo = t->data, .family = NFPROTO_IPV4, + .net = net, }; if (par.target->destroy != NULL) par.target->destroy(&par); @@ -78,7 +79,7 @@ static void tcf_ipt_release(struct tc_action *a) struct tcf_ipt *ipt = to_ipt(a); if (ipt->tcfi_t) { - ipt_destroy_target(ipt->tcfi_t); + ipt_destroy_target(ipt->tcfi_t, a->idrinfo->net); kfree(ipt->tcfi_t); } kfree(ipt->tcfi_tname); @@ -180,7 +181,7 @@ static int __tcf_ipt_init(struct net *net, unsigned int id, struct nlattr *nla, spin_lock_bh(&ipt->tcf_lock); if (ret != ACT_P_CREATED) { - ipt_destroy_target(ipt->tcfi_t); + ipt_destroy_target(ipt->tcfi_t, net); kfree(ipt->tcfi_tname); kfree(ipt->tcfi_t); } @@ -350,7 +351,7 @@ static __net_init int ipt_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, ipt_net_id); - return tc_action_net_init(tn, &act_ipt_ops); + return tc_action_net_init(net, tn, &act_ipt_ops); } static void __net_exit ipt_exit_net(struct list_head *net_list) @@ -399,7 +400,7 @@ static __net_init int xt_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, xt_net_id); - return tc_action_net_init(tn, &act_xt_ops); + return tc_action_net_init(net, tn, &act_xt_ops); } static void __net_exit xt_exit_net(struct list_head *net_list) diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c index be3f88dfc37e..9d1bf508075a 100644 --- a/net/sched/act_mirred.c +++ b/net/sched/act_mirred.c @@ -453,7 +453,7 @@ static __net_init int mirred_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, mirred_net_id); - return tc_action_net_init(tn, &act_mirred_ops); + return tc_action_net_init(net, tn, &act_mirred_ops); } static void __net_exit mirred_exit_net(struct list_head *net_list) diff --git a/net/sched/act_mpls.c b/net/sched/act_mpls.c index 0f299e3b618c..e168df0e008a 100644 --- a/net/sched/act_mpls.c +++ b/net/sched/act_mpls.c @@ -375,7 +375,7 @@ static __net_init int mpls_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, mpls_net_id); - return tc_action_net_init(tn, &act_mpls_ops); + return tc_action_net_init(net, tn, &act_mpls_ops); } static void __net_exit mpls_exit_net(struct list_head *net_list) diff --git a/net/sched/act_nat.c b/net/sched/act_nat.c index 7b858c11b1b5..ea4c5359e7df 100644 --- a/net/sched/act_nat.c +++ b/net/sched/act_nat.c @@ -327,7 +327,7 @@ static __net_init int nat_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, nat_net_id); - return tc_action_net_init(tn, &act_nat_ops); + return tc_action_net_init(net, tn, &act_nat_ops); } static void __net_exit nat_exit_net(struct list_head *net_list) diff --git a/net/sched/act_pedit.c b/net/sched/act_pedit.c index 17360c6faeaa..cdfaa79382a2 100644 --- a/net/sched/act_pedit.c +++ b/net/sched/act_pedit.c @@ -498,7 +498,7 @@ static __net_init int pedit_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, pedit_net_id); - return tc_action_net_init(tn, &act_pedit_ops); + return tc_action_net_init(net, tn, &act_pedit_ops); } static void __net_exit pedit_exit_net(struct list_head *net_list) diff --git a/net/sched/act_police.c b/net/sched/act_police.c index 49cec3e64a4d..6315e0f8d26e 100644 --- a/net/sched/act_police.c +++ b/net/sched/act_police.c @@ -371,7 +371,7 @@ static __net_init int police_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, police_net_id); - return tc_action_net_init(tn, &act_police_ops); + return tc_action_net_init(net, tn, &act_police_ops); } static void __net_exit police_exit_net(struct list_head *net_list) diff --git a/net/sched/act_sample.c b/net/sched/act_sample.c index 595308d60133..7eff363f9f03 100644 --- a/net/sched/act_sample.c +++ b/net/sched/act_sample.c @@ -265,7 +265,7 @@ static __net_init int sample_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, sample_net_id); - return tc_action_net_init(tn, &act_sample_ops); + return tc_action_net_init(net, tn, &act_sample_ops); } static void __net_exit sample_exit_net(struct list_head *net_list) diff --git a/net/sched/act_simple.c b/net/sched/act_simple.c index 33aefa25b545..6120e56117ca 100644 --- a/net/sched/act_simple.c +++ b/net/sched/act_simple.c @@ -232,7 +232,7 @@ static __net_init int simp_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, simp_net_id); - return tc_action_net_init(tn, &act_simp_ops); + return tc_action_net_init(net, tn, &act_simp_ops); } static void __net_exit simp_exit_net(struct list_head *net_list) diff --git a/net/sched/act_skbedit.c b/net/sched/act_skbedit.c index 37dced00b63d..6a8d3337c577 100644 --- a/net/sched/act_skbedit.c +++ b/net/sched/act_skbedit.c @@ -336,7 +336,7 @@ static __net_init int skbedit_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, skbedit_net_id); - return tc_action_net_init(tn, &act_skbedit_ops); + return tc_action_net_init(net, tn, &act_skbedit_ops); } static void __net_exit skbedit_exit_net(struct list_head *net_list) diff --git a/net/sched/act_skbmod.c b/net/sched/act_skbmod.c index 7da3518e18ef..888437f97ba6 100644 --- a/net/sched/act_skbmod.c +++ b/net/sched/act_skbmod.c @@ -287,7 +287,7 @@ static __net_init int skbmod_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, skbmod_net_id); - return tc_action_net_init(tn, &act_skbmod_ops); + return tc_action_net_init(net, tn, &act_skbmod_ops); } static void __net_exit skbmod_exit_net(struct list_head *net_list) diff --git a/net/sched/act_tunnel_key.c b/net/sched/act_tunnel_key.c index 6d0debdc9b97..2f83a79f76aa 100644 --- a/net/sched/act_tunnel_key.c +++ b/net/sched/act_tunnel_key.c @@ -600,7 +600,7 @@ static __net_init int tunnel_key_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, tunnel_key_net_id); - return tc_action_net_init(tn, &act_tunnel_key_ops); + return tc_action_net_init(net, tn, &act_tunnel_key_ops); } static void __net_exit tunnel_key_exit_net(struct list_head *net_list) diff --git a/net/sched/act_vlan.c b/net/sched/act_vlan.c index a3c9eea1ee8a..287a30bf8930 100644 --- a/net/sched/act_vlan.c +++ b/net/sched/act_vlan.c @@ -334,7 +334,7 @@ static __net_init int vlan_init_net(struct net *net) { struct tc_action_net *tn = net_generic(net, vlan_net_id); - return tc_action_net_init(tn, &act_vlan_ops); + return tc_action_net_init(net, tn, &act_vlan_ops); } static void __net_exit vlan_exit_net(struct list_head *net_list) -- cgit v1.2.3 From 340625e618e1b37a72a02f07aa7144ae0ab0b19e Mon Sep 17 00:00:00 2001 From: Ronnie Sahlberg Date: Tue, 27 Aug 2019 09:30:14 +1000 Subject: cifs: replace various strncpy with strscpy and similar Using strscpy is cleaner, and avoids some problems with handling maximum length strings. Linus noticed the original problem and Aurelien pointed out some additional problems. Fortunately most of this is SMB1 code (and in particular the ASCII string handling older, which is less common). Reported-by: Linus Torvalds Reviewed-by: Aurelien Aptel Signed-off-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/cifs/cifsproto.h | 1 + fs/cifs/cifssmb.c | 197 +++++++++++++++++----------------------------------- fs/cifs/connect.c | 7 +- fs/cifs/dir.c | 5 +- fs/cifs/misc.c | 22 ++++++ fs/cifs/sess.c | 26 ++++--- 6 files changed, 112 insertions(+), 146 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index e23234207fc2..592a6cea2b79 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -579,6 +579,7 @@ extern void rqst_page_get_length(struct smb_rqst *rqst, unsigned int page, unsigned int *len, unsigned int *offset); void extract_unc_hostname(const char *unc, const char **h, size_t *len); +int copy_path_name(char *dst, const char *src); #ifdef CONFIG_CIFS_DFS_UPCALL static inline int get_dfs_path(const unsigned int xid, struct cifs_ses *ses, diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index e2f95965065d..3907653e63c7 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -942,10 +942,8 @@ PsxDelete: PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; - } else { /* BB add path length overrun check */ - name_len = strnlen(fileName, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->FileName, fileName, name_len); + } else { + name_len = copy_path_name(pSMB->FileName, fileName); } params = 6 + name_len; @@ -1015,10 +1013,8 @@ DelFileRetry: remap); name_len++; /* trailing null */ name_len *= 2; - } else { /* BB improve check for buffer overruns BB */ - name_len = strnlen(name, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->fileName, name, name_len); + } else { + name_len = copy_path_name(pSMB->fileName, name); } pSMB->SearchAttributes = cpu_to_le16(ATTR_READONLY | ATTR_HIDDEN | ATTR_SYSTEM); @@ -1062,10 +1058,8 @@ RmDirRetry: remap); name_len++; /* trailing null */ name_len *= 2; - } else { /* BB improve check for buffer overruns BB */ - name_len = strnlen(name, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->DirName, name, name_len); + } else { + name_len = copy_path_name(pSMB->DirName, name); } pSMB->BufferFormat = 0x04; @@ -1107,10 +1101,8 @@ MkDirRetry: remap); name_len++; /* trailing null */ name_len *= 2; - } else { /* BB improve check for buffer overruns BB */ - name_len = strnlen(name, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->DirName, name, name_len); + } else { + name_len = copy_path_name(pSMB->DirName, name); } pSMB->BufferFormat = 0x04; @@ -1157,10 +1149,8 @@ PsxCreat: PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; - } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(name, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->FileName, name, name_len); + } else { + name_len = copy_path_name(pSMB->FileName, name); } params = 6 + name_len; @@ -1324,11 +1314,9 @@ OldOpenRetry: fileName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; - } else { /* BB improve check for buffer overruns BB */ + } else { count = 0; /* no pad */ - name_len = strnlen(fileName, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->fileName, fileName, name_len); + name_len = copy_path_name(pSMB->fileName, fileName); } if (*pOplock & REQ_OPLOCK) pSMB->OpenFlags = cpu_to_le16(REQ_OPLOCK); @@ -1442,11 +1430,8 @@ openRetry: /* BB improve check for buffer overruns BB */ /* no pad */ count = 0; - name_len = strnlen(path, PATH_MAX); - /* trailing null */ - name_len++; + name_len = copy_path_name(req->fileName, path); req->NameLength = cpu_to_le16(name_len); - strncpy(req->fileName, path, name_len); } if (*oplock & REQ_OPLOCK) @@ -2812,15 +2797,10 @@ renameRetry: remap); name_len2 += 1 /* trailing null */ + 1 /* Signature word */ ; name_len2 *= 2; /* convert to bytes */ - } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(from_name, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->OldFileName, from_name, name_len); - name_len2 = strnlen(to_name, PATH_MAX); - name_len2++; /* trailing null */ + } else { + name_len = copy_path_name(pSMB->OldFileName, from_name); + name_len2 = copy_path_name(pSMB->OldFileName+name_len+1, to_name); pSMB->OldFileName[name_len] = 0x04; /* 2nd buffer format */ - strncpy(&pSMB->OldFileName[name_len + 1], to_name, name_len2); - name_len2++; /* trailing null */ name_len2++; /* signature byte */ } @@ -2962,15 +2942,10 @@ copyRetry: toName, PATH_MAX, nls_codepage, remap); name_len2 += 1 /* trailing null */ + 1 /* Signature word */ ; name_len2 *= 2; /* convert to bytes */ - } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(fromName, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->OldFileName, fromName, name_len); - name_len2 = strnlen(toName, PATH_MAX); - name_len2++; /* trailing null */ + } else { + name_len = copy_path_name(pSMB->OldFileName, fromName); pSMB->OldFileName[name_len] = 0x04; /* 2nd buffer format */ - strncpy(&pSMB->OldFileName[name_len + 1], toName, name_len2); - name_len2++; /* trailing null */ + name_len2 = copy_path_name(pSMB->OldFileName+name_len+1, toName); name_len2++; /* signature byte */ } @@ -3021,10 +2996,8 @@ createSymLinkRetry: name_len++; /* trailing null */ name_len *= 2; - } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(fromName, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->FileName, fromName, name_len); + } else { + name_len = copy_path_name(pSMB->FileName, fromName); } params = 6 + name_len; pSMB->MaxSetupCount = 0; @@ -3044,10 +3017,8 @@ createSymLinkRetry: PATH_MAX, nls_codepage, remap); name_len_target++; /* trailing null */ name_len_target *= 2; - } else { /* BB improve the check for buffer overruns BB */ - name_len_target = strnlen(toName, PATH_MAX); - name_len_target++; /* trailing null */ - strncpy(data_offset, toName, name_len_target); + } else { + name_len_target = copy_path_name(data_offset, toName); } pSMB->MaxParameterCount = cpu_to_le16(2); @@ -3109,10 +3080,8 @@ createHardLinkRetry: name_len++; /* trailing null */ name_len *= 2; - } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(toName, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->FileName, toName, name_len); + } else { + name_len = copy_path_name(pSMB->FileName, toName); } params = 6 + name_len; pSMB->MaxSetupCount = 0; @@ -3131,10 +3100,8 @@ createHardLinkRetry: PATH_MAX, nls_codepage, remap); name_len_target++; /* trailing null */ name_len_target *= 2; - } else { /* BB improve the check for buffer overruns BB */ - name_len_target = strnlen(fromName, PATH_MAX); - name_len_target++; /* trailing null */ - strncpy(data_offset, fromName, name_len_target); + } else { + name_len_target = copy_path_name(data_offset, fromName); } pSMB->MaxParameterCount = cpu_to_le16(2); @@ -3213,15 +3180,10 @@ winCreateHardLinkRetry: remap); name_len2 += 1 /* trailing null */ + 1 /* Signature word */ ; name_len2 *= 2; /* convert to bytes */ - } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(from_name, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->OldFileName, from_name, name_len); - name_len2 = strnlen(to_name, PATH_MAX); - name_len2++; /* trailing null */ + } else { + name_len = copy_path_name(pSMB->OldFileName, from_name); pSMB->OldFileName[name_len] = 0x04; /* 2nd buffer format */ - strncpy(&pSMB->OldFileName[name_len + 1], to_name, name_len2); - name_len2++; /* trailing null */ + name_len2 = copy_path_name(pSMB->OldFileName+name_len+1, to_name); name_len2++; /* signature byte */ } @@ -3271,10 +3233,8 @@ querySymLinkRetry: remap); name_len++; /* trailing null */ name_len *= 2; - } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(searchName, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->FileName, searchName, name_len); + } else { + name_len = copy_path_name(pSMB->FileName, searchName); } params = 2 /* level */ + 4 /* rsrvd */ + name_len /* incl null */ ; @@ -3691,10 +3651,8 @@ queryAclRetry: name_len *= 2; pSMB->FileName[name_len] = 0; pSMB->FileName[name_len+1] = 0; - } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(searchName, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->FileName, searchName, name_len); + } else { + name_len = copy_path_name(pSMB->FileName, searchName); } params = 2 /* level */ + 4 /* rsrvd */ + name_len /* incl null */ ; @@ -3776,10 +3734,8 @@ setAclRetry: PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; - } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(fileName, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->FileName, fileName, name_len); + } else { + name_len = copy_path_name(pSMB->FileName, fileName); } params = 6 + name_len; pSMB->MaxParameterCount = cpu_to_le16(2); @@ -4184,9 +4140,7 @@ QInfRetry: name_len++; /* trailing null */ name_len *= 2; } else { - name_len = strnlen(search_name, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->FileName, search_name, name_len); + name_len = copy_path_name(pSMB->FileName, search_name); } pSMB->BufferFormat = 0x04; name_len++; /* account for buffer type byte */ @@ -4321,10 +4275,8 @@ QPathInfoRetry: PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; - } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(search_name, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->FileName, search_name, name_len); + } else { + name_len = copy_path_name(pSMB->FileName, search_name); } params = 2 /* level */ + 4 /* reserved */ + name_len /* includes NUL */; @@ -4490,10 +4442,8 @@ UnixQPathInfoRetry: PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; - } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(searchName, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->FileName, searchName, name_len); + } else { + name_len = copy_path_name(pSMB->FileName, searchName); } params = 2 /* level */ + 4 /* reserved */ + name_len /* includes NUL */; @@ -4593,17 +4543,16 @@ findFirstRetry: pSMB->FileName[name_len+1] = 0; name_len += 2; } - } else { /* BB add check for overrun of SMB buf BB */ - name_len = strnlen(searchName, PATH_MAX); -/* BB fix here and in unicode clause above ie - if (name_len > buffersize-header) - free buffer exit; BB */ - strncpy(pSMB->FileName, searchName, name_len); + } else { + name_len = copy_path_name(pSMB->FileName, searchName); if (msearch) { - pSMB->FileName[name_len] = CIFS_DIR_SEP(cifs_sb); - pSMB->FileName[name_len+1] = '*'; - pSMB->FileName[name_len+2] = 0; - name_len += 3; + if (WARN_ON_ONCE(name_len > PATH_MAX-2)) + name_len = PATH_MAX-2; + /* overwrite nul byte */ + pSMB->FileName[name_len-1] = CIFS_DIR_SEP(cifs_sb); + pSMB->FileName[name_len] = '*'; + pSMB->FileName[name_len+1] = 0; + name_len += 2; } } @@ -4898,10 +4847,8 @@ GetInodeNumberRetry: remap); name_len++; /* trailing null */ name_len *= 2; - } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(search_name, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->FileName, search_name, name_len); + } else { + name_len = copy_path_name(pSMB->FileName, search_name); } params = 2 /* level */ + 4 /* rsrvd */ + name_len /* incl null */ ; @@ -5008,9 +4955,7 @@ getDFSRetry: name_len++; /* trailing null */ name_len *= 2; } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(search_name, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->RequestFileName, search_name, name_len); + name_len = copy_path_name(pSMB->RequestFileName, search_name); } if (ses->server->sign) @@ -5663,10 +5608,8 @@ SetEOFRetry: PATH_MAX, cifs_sb->local_nls, remap); name_len++; /* trailing null */ name_len *= 2; - } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(file_name, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->FileName, file_name, name_len); + } else { + name_len = copy_path_name(pSMB->FileName, file_name); } params = 6 + name_len; data_count = sizeof(struct file_end_of_file_info); @@ -5959,10 +5902,8 @@ SetTimesRetry: PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; - } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(fileName, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->FileName, fileName, name_len); + } else { + name_len = copy_path_name(pSMB->FileName, fileName); } params = 6 + name_len; @@ -6040,10 +5981,8 @@ SetAttrLgcyRetry: PATH_MAX, nls_codepage); name_len++; /* trailing null */ name_len *= 2; - } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(fileName, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->fileName, fileName, name_len); + } else { + name_len = copy_path_name(pSMB->fileName, fileName); } pSMB->attr = cpu_to_le16(dos_attrs); pSMB->BufferFormat = 0x04; @@ -6203,10 +6142,8 @@ setPermsRetry: PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; - } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(file_name, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->FileName, file_name, name_len); + } else { + name_len = copy_path_name(pSMB->FileName, file_name); } params = 6 + name_len; @@ -6298,10 +6235,8 @@ QAllEAsRetry: PATH_MAX, nls_codepage, remap); list_len++; /* trailing null */ list_len *= 2; - } else { /* BB improve the check for buffer overruns BB */ - list_len = strnlen(searchName, PATH_MAX); - list_len++; /* trailing null */ - strncpy(pSMB->FileName, searchName, list_len); + } else { + list_len = copy_path_name(pSMB->FileName, searchName); } params = 2 /* level */ + 4 /* reserved */ + list_len /* includes NUL */; @@ -6480,10 +6415,8 @@ SetEARetry: PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; - } else { /* BB improve the check for buffer overruns BB */ - name_len = strnlen(fileName, PATH_MAX); - name_len++; /* trailing null */ - strncpy(pSMB->FileName, fileName, name_len); + } else { + name_len = copy_path_name(pSMB->FileName, fileName); } params = 6 + name_len; diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index ddefddeffd06..5299effa6f7d 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -4231,16 +4231,19 @@ build_unc_path_to_root(const struct smb_vol *vol, strlen(vol->prepath) + 1 : 0; unsigned int unc_len = strnlen(vol->UNC, MAX_TREE_SIZE + 1); + if (unc_len > MAX_TREE_SIZE) + return ERR_PTR(-EINVAL); + full_path = kmalloc(unc_len + pplen + 1, GFP_KERNEL); if (full_path == NULL) return ERR_PTR(-ENOMEM); - strncpy(full_path, vol->UNC, unc_len); + memcpy(full_path, vol->UNC, unc_len); pos = full_path + unc_len; if (pplen) { *pos = CIFS_DIR_SEP(cifs_sb); - strncpy(pos + 1, vol->prepath, pplen); + memcpy(pos + 1, vol->prepath, pplen); pos += pplen; } diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index f26a48dd2e39..be424e81e3ad 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -69,11 +69,10 @@ cifs_build_path_to_root(struct smb_vol *vol, struct cifs_sb_info *cifs_sb, return full_path; if (dfsplen) - strncpy(full_path, tcon->treeName, dfsplen); + memcpy(full_path, tcon->treeName, dfsplen); full_path[dfsplen] = CIFS_DIR_SEP(cifs_sb); - strncpy(full_path + dfsplen + 1, vol->prepath, pplen); + memcpy(full_path + dfsplen + 1, vol->prepath, pplen); convert_delimiter(full_path, CIFS_DIR_SEP(cifs_sb)); - full_path[dfsplen + pplen] = 0; /* add trailing null */ return full_path; } diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index f383877a6511..5ad83bdb9bea 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -1011,3 +1011,25 @@ void extract_unc_hostname(const char *unc, const char **h, size_t *len) *h = unc; *len = end - unc; } + +/** + * copy_path_name - copy src path to dst, possibly truncating + * + * returns number of bytes written (including trailing nul) + */ +int copy_path_name(char *dst, const char *src) +{ + int name_len; + + /* + * PATH_MAX includes nul, so if strlen(src) >= PATH_MAX it + * will truncate and strlen(dst) will be PATH_MAX-1 + */ + name_len = strscpy(dst, src, PATH_MAX); + if (WARN_ON_ONCE(name_len < 0)) + name_len = PATH_MAX-1; + + /* we count the trailing nul */ + name_len++; + return name_len; +} diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index dcd49ad60c83..4c764ff7edd2 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -159,13 +159,16 @@ static void ascii_ssetup_strings(char **pbcc_area, struct cifs_ses *ses, const struct nls_table *nls_cp) { char *bcc_ptr = *pbcc_area; + int len; /* copy user */ /* BB what about null user mounts - check that we do this BB */ /* copy user */ if (ses->user_name != NULL) { - strncpy(bcc_ptr, ses->user_name, CIFS_MAX_USERNAME_LEN); - bcc_ptr += strnlen(ses->user_name, CIFS_MAX_USERNAME_LEN); + len = strscpy(bcc_ptr, ses->user_name, CIFS_MAX_USERNAME_LEN); + if (WARN_ON_ONCE(len < 0)) + len = CIFS_MAX_USERNAME_LEN - 1; + bcc_ptr += len; } /* else null user mount */ *bcc_ptr = 0; @@ -173,8 +176,10 @@ static void ascii_ssetup_strings(char **pbcc_area, struct cifs_ses *ses, /* copy domain */ if (ses->domainName != NULL) { - strncpy(bcc_ptr, ses->domainName, CIFS_MAX_DOMAINNAME_LEN); - bcc_ptr += strnlen(ses->domainName, CIFS_MAX_DOMAINNAME_LEN); + len = strscpy(bcc_ptr, ses->domainName, CIFS_MAX_DOMAINNAME_LEN); + if (WARN_ON_ONCE(len < 0)) + len = CIFS_MAX_DOMAINNAME_LEN - 1; + bcc_ptr += len; } /* else we will send a null domain name so the server will default to its own domain */ *bcc_ptr = 0; @@ -242,9 +247,10 @@ static void decode_ascii_ssetup(char **pbcc_area, __u16 bleft, kfree(ses->serverOS); - ses->serverOS = kzalloc(len + 1, GFP_KERNEL); + ses->serverOS = kmalloc(len + 1, GFP_KERNEL); if (ses->serverOS) { - strncpy(ses->serverOS, bcc_ptr, len); + memcpy(ses->serverOS, bcc_ptr, len); + ses->serverOS[len] = 0; if (strncmp(ses->serverOS, "OS/2", 4) == 0) cifs_dbg(FYI, "OS/2 server\n"); } @@ -258,9 +264,11 @@ static void decode_ascii_ssetup(char **pbcc_area, __u16 bleft, kfree(ses->serverNOS); - ses->serverNOS = kzalloc(len + 1, GFP_KERNEL); - if (ses->serverNOS) - strncpy(ses->serverNOS, bcc_ptr, len); + ses->serverNOS = kmalloc(len + 1, GFP_KERNEL); + if (ses->serverNOS) { + memcpy(ses->serverNOS, bcc_ptr, len); + ses->serverNOS[len] = 0; + } bcc_ptr += len + 1; bleft -= len + 1; -- cgit v1.2.3 From 36e337744c0d9ea23a64a8b62bddec6173e93975 Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 27 Aug 2019 17:29:56 -0500 Subject: cifs: update internal module number To 2.22 Signed-off-by: Steve French --- fs/cifs/cifsfs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index 4b21a90015a9..99caf77df4a2 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -152,5 +152,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg); extern const struct export_operations cifs_export_ops; #endif /* CONFIG_CIFS_NFSD_EXPORT */ -#define CIFS_VERSION "2.21" +#define CIFS_VERSION "2.22" #endif /* _CIFSFS_H */ -- cgit v1.2.3 From 94acaeb50ced653bfe2c4d8037c70b107af14124 Mon Sep 17 00:00:00 2001 From: Marco Hartmann Date: Wed, 21 Aug 2019 11:00:46 +0000 Subject: Add genphy_c45_config_aneg() function to phy-c45.c Commit 34786005eca3 ("net: phy: prevent PHYs w/o Clause 22 regs from calling genphy_config_aneg") introduced a check that aborts phy_config_aneg() if the phy is a C45 phy. This causes phy_state_machine() to call phy_error() so that the phy ends up in PHY_HALTED state. Instead of returning -EOPNOTSUPP, call genphy_c45_config_aneg() (analogous to the C22 case) so that the state machine can run correctly. genphy_c45_config_aneg() closely resembles mv3310_config_aneg() in drivers/net/phy/marvell10g.c, excluding vendor specific configurations for 1000BaseT. Fixes: 22b56e827093 ("net: phy: replace genphy_10g_driver with genphy_c45_driver") Signed-off-by: Marco Hartmann Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/phy-c45.c | 26 ++++++++++++++++++++++++++ drivers/net/phy/phy.c | 2 +- include/linux/phy.h | 1 + 3 files changed, 28 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c index 58bb25e4af10..7935593debb1 100644 --- a/drivers/net/phy/phy-c45.c +++ b/drivers/net/phy/phy-c45.c @@ -523,6 +523,32 @@ int genphy_c45_read_status(struct phy_device *phydev) } EXPORT_SYMBOL_GPL(genphy_c45_read_status); +/** + * genphy_c45_config_aneg - restart auto-negotiation or forced setup + * @phydev: target phy_device struct + * + * Description: If auto-negotiation is enabled, we configure the + * advertising, and then restart auto-negotiation. If it is not + * enabled, then we force a configuration. + */ +int genphy_c45_config_aneg(struct phy_device *phydev) +{ + bool changed = false; + int ret; + + if (phydev->autoneg == AUTONEG_DISABLE) + return genphy_c45_pma_setup_forced(phydev); + + ret = genphy_c45_an_config_aneg(phydev); + if (ret < 0) + return ret; + if (ret > 0) + changed = true; + + return genphy_c45_check_and_restart_aneg(phydev, changed); +} +EXPORT_SYMBOL_GPL(genphy_c45_config_aneg); + /* The gen10g_* functions are the old Clause 45 stub */ int gen10g_config_aneg(struct phy_device *phydev) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index ef7aa738e0dc..6b0f89369b46 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -507,7 +507,7 @@ static int phy_config_aneg(struct phy_device *phydev) * allowed to call genphy_config_aneg() */ if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0))) - return -EOPNOTSUPP; + return genphy_c45_config_aneg(phydev); return genphy_config_aneg(phydev); } diff --git a/include/linux/phy.h b/include/linux/phy.h index 462b90b73f93..2fb9c8ffaf10 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -1107,6 +1107,7 @@ int genphy_c45_an_disable_aneg(struct phy_device *phydev); int genphy_c45_read_mdix(struct phy_device *phydev); int genphy_c45_pma_read_abilities(struct phy_device *phydev); int genphy_c45_read_status(struct phy_device *phydev); +int genphy_c45_config_aneg(struct phy_device *phydev); /* The gen10g_* functions are the old Clause 45 stub */ int gen10g_config_aneg(struct phy_device *phydev); -- cgit v1.2.3 From bcccb0a535bb99616e4b992568371efab1ab14e8 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Sun, 25 Aug 2019 21:32:12 +0300 Subject: net: dsa: tag_8021q: Future-proof the reserved fields in the custom VID After witnessing the discussion in https://lkml.org/lkml/2019/8/14/151 w.r.t. ioctl extensibility, it became clear that such an issue might prevent that the 3 RSV bits inside the DSA 802.1Q tag might also suffer the same fate and be useless for further extension. So clearly specify that the reserved bits should currently be transmitted as zero and ignored on receive. The DSA tagger already does this (and has always did), and is the only known user so far (no Wireshark dissection plugin, etc). So there should be no incompatibility to speak of. Fixes: 0471dd429cea ("net: dsa: tag_8021q: Create a stable binary format") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- net/dsa/tag_8021q.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c index 6ebbd799c4eb..67a1bc635a7b 100644 --- a/net/dsa/tag_8021q.c +++ b/net/dsa/tag_8021q.c @@ -28,6 +28,7 @@ * * RSV - VID[9]: * To be used for further expansion of SWITCH_ID or for other purposes. + * Must be transmitted as zero and ignored on receive. * * SWITCH_ID - VID[8:6]: * Index of switch within DSA tree. Must be between 0 and @@ -35,6 +36,7 @@ * * RSV - VID[5:4]: * To be used for further expansion of PORT or for other purposes. + * Must be transmitted as zero and ignored on receive. * * PORT - VID[3:0]: * Index of switch port. Must be between 0 and DSA_MAX_PORTS - 1. -- cgit v1.2.3 From 2c1644cf6d46a8267d79ed95cb9b563839346562 Mon Sep 17 00:00:00 2001 From: Feng Sun Date: Mon, 26 Aug 2019 14:46:04 +0800 Subject: net: fix skb use after free in netpoll After commit baeababb5b85d5c4e6c917efe2a1504179438d3b ("tun: return NET_XMIT_DROP for dropped packets"), when tun_net_xmit drop packets, it will free skb and return NET_XMIT_DROP, netpoll_send_skb_on_dev will run into following use after free cases: 1. retry netpoll_start_xmit with freed skb; 2. queue freed skb in npinfo->txq. queue_process will also run into use after free case. hit netpoll_send_skb_on_dev first case with following kernel log: [ 117.864773] kernel BUG at mm/slub.c:306! [ 117.864773] invalid opcode: 0000 [#1] SMP PTI [ 117.864774] CPU: 3 PID: 2627 Comm: loop_printmsg Kdump: loaded Tainted: P OE 5.3.0-050300rc5-generic #201908182231 [ 117.864775] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 117.864775] RIP: 0010:kmem_cache_free+0x28d/0x2b0 [ 117.864781] Call Trace: [ 117.864781] ? tun_net_xmit+0x21c/0x460 [ 117.864781] kfree_skbmem+0x4e/0x60 [ 117.864782] kfree_skb+0x3a/0xa0 [ 117.864782] tun_net_xmit+0x21c/0x460 [ 117.864782] netpoll_start_xmit+0x11d/0x1b0 [ 117.864788] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864789] __br_forward+0x1b9/0x1e0 [bridge] [ 117.864789] ? skb_clone+0x53/0xd0 [ 117.864790] ? __skb_clone+0x2e/0x120 [ 117.864790] deliver_clone+0x37/0x50 [bridge] [ 117.864790] maybe_deliver+0x89/0xc0 [bridge] [ 117.864791] br_flood+0x6c/0x130 [bridge] [ 117.864791] br_dev_xmit+0x315/0x3c0 [bridge] [ 117.864792] netpoll_start_xmit+0x11d/0x1b0 [ 117.864792] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864792] netpoll_send_udp+0x2c6/0x3e8 [ 117.864793] write_msg+0xd9/0xf0 [netconsole] [ 117.864793] console_unlock+0x386/0x4e0 [ 117.864793] vprintk_emit+0x17e/0x280 [ 117.864794] vprintk_default+0x29/0x50 [ 117.864794] vprintk_func+0x4c/0xbc [ 117.864794] printk+0x58/0x6f [ 117.864795] loop_fun+0x24/0x41 [printmsg_loop] [ 117.864795] kthread+0x104/0x140 [ 117.864795] ? 0xffffffffc05b1000 [ 117.864796] ? kthread_park+0x80/0x80 [ 117.864796] ret_from_fork+0x35/0x40 Signed-off-by: Feng Sun Signed-off-by: Xiaojun Zhao Signed-off-by: David S. Miller --- net/core/netpoll.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 2cf27da1baeb..849380a622ef 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -122,7 +122,7 @@ static void queue_process(struct work_struct *work) txq = netdev_get_tx_queue(dev, q_index); HARD_TX_LOCK(dev, txq, smp_processor_id()); if (netif_xmit_frozen_or_stopped(txq) || - netpoll_start_xmit(skb, dev, txq) != NETDEV_TX_OK) { + !dev_xmit_complete(netpoll_start_xmit(skb, dev, txq))) { skb_queue_head(&npinfo->txq, skb); HARD_TX_UNLOCK(dev, txq); local_irq_restore(flags); @@ -335,7 +335,7 @@ void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, HARD_TX_UNLOCK(dev, txq); - if (status == NETDEV_TX_OK) + if (dev_xmit_complete(status)) break; } @@ -352,7 +352,7 @@ void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, } - if (status != NETDEV_TX_OK) { + if (!dev_xmit_complete(status)) { skb_queue_tail(&npinfo->txq, skb); schedule_delayed_work(&npinfo->tx_work,0); } -- cgit v1.2.3 From 7d0a06586b2686ba80c4a2da5f91cb10ffbea736 Mon Sep 17 00:00:00 2001 From: Ka-Cheong Poon Date: Mon, 26 Aug 2019 02:39:12 -0700 Subject: net/rds: Fix info leak in rds6_inc_info_copy() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The rds6_inc_info_copy() function has a couple struct members which are leaking stack information. The ->tos field should hold actual information and the ->flags field needs to be zeroed out. Fixes: 3eb450367d08 ("rds: add type of service(tos) infrastructure") Fixes: b7ff8b1036f0 ("rds: Extend RDS API for IPv6 support") Reported-by: 黄ID蝴蝶 Signed-off-by: Dan Carpenter Signed-off-by: Ka-Cheong Poon Acked-by: Santosh Shilimkar Signed-off-by: David S. Miller --- net/rds/recv.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/rds/recv.c b/net/rds/recv.c index 853de4876088..a42ba7fa06d5 100644 --- a/net/rds/recv.c +++ b/net/rds/recv.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006, 2018 Oracle and/or its affiliates. All rights reserved. + * Copyright (c) 2006, 2019 Oracle and/or its affiliates. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU @@ -811,6 +811,7 @@ void rds6_inc_info_copy(struct rds_incoming *inc, minfo6.seq = be64_to_cpu(inc->i_hdr.h_sequence); minfo6.len = be32_to_cpu(inc->i_hdr.h_len); + minfo6.tos = inc->i_conn->c_tos; if (flip) { minfo6.laddr = *daddr; @@ -824,6 +825,8 @@ void rds6_inc_info_copy(struct rds_incoming *inc, minfo6.fport = inc->i_hdr.h_dport; } + minfo6.flags = 0; + rds_info_copy(iter, &minfo6, sizeof(minfo6)); } #endif -- cgit v1.2.3 From fdfc5c8594c24c5df883583ebd286321a80e0a67 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 26 Aug 2019 09:19:15 -0700 Subject: tcp: remove empty skb from write queue in error cases Vladimir Rutsky reported stuck TCP sessions after memory pressure events. Edge Trigger epoll() user would never receive an EPOLLOUT notification allowing them to retry a sendmsg(). Jason tested the case of sk_stream_alloc_skb() returning NULL, but there are other paths that could lead both sendmsg() and sendpage() to return -1 (EAGAIN), with an empty skb queued on the write queue. This patch makes sure we remove this empty skb so that Jason code can detect that the queue is empty, and call sk->sk_write_space(sk) accordingly. Fixes: ce5ec440994b ("tcp: ensure epoll edge trigger wakeup when write queue is empty") Signed-off-by: Eric Dumazet Cc: Jason Baron Reported-by: Vladimir Rutsky Cc: Soheil Hassas Yeganeh Cc: Neal Cardwell Acked-by: Soheil Hassas Yeganeh Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 77b485d60b9d..61082065b26a 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -935,6 +935,22 @@ static int tcp_send_mss(struct sock *sk, int *size_goal, int flags) return mss_now; } +/* In some cases, both sendpage() and sendmsg() could have added + * an skb to the write queue, but failed adding payload on it. + * We need to remove it to consume less memory, but more + * importantly be able to generate EPOLLOUT for Edge Trigger epoll() + * users. + */ +static void tcp_remove_empty_skb(struct sock *sk, struct sk_buff *skb) +{ + if (skb && !skb->len) { + tcp_unlink_write_queue(skb, sk); + if (tcp_write_queue_empty(sk)) + tcp_chrono_stop(sk, TCP_CHRONO_BUSY); + sk_wmem_free_skb(sk, skb); + } +} + ssize_t do_tcp_sendpages(struct sock *sk, struct page *page, int offset, size_t size, int flags) { @@ -1064,6 +1080,7 @@ out: return copied; do_error: + tcp_remove_empty_skb(sk, tcp_write_queue_tail(sk)); if (copied) goto out; out_err: @@ -1388,18 +1405,11 @@ out_nopush: sock_zerocopy_put(uarg); return copied + copied_syn; +do_error: + skb = tcp_write_queue_tail(sk); do_fault: - if (!skb->len) { - tcp_unlink_write_queue(skb, sk); - /* It is the one place in all of TCP, except connection - * reset, where we can be unlinking the send_head. - */ - if (tcp_write_queue_empty(sk)) - tcp_chrono_stop(sk, TCP_CHRONO_BUSY); - sk_wmem_free_skb(sk, skb); - } + tcp_remove_empty_skb(sk, skb); -do_error: if (copied + copied_syn) goto out; out_err: -- cgit v1.2.3 From 82e40f558de566fdee214bec68096bbd5e64a6a4 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 28 Aug 2019 11:10:16 +0100 Subject: KVM: arm/arm64: vgic-v2: Handle SGI bits in GICD_I{S,C}PENDR0 as WI A guest is not allowed to inject a SGI (or clear its pending state) by writing to GICD_ISPENDR0 (resp. GICD_ICPENDR0), as these bits are defined as WI (as per ARM IHI 0048B 4.3.7 and 4.3.8). Make sure we correctly emulate the architecture. Fixes: 96b298000db4 ("KVM: arm/arm64: vgic-new: Add PENDING registers handlers") Cc: stable@vger.kernel.org # 4.7+ Reported-by: Andre Przywara Signed-off-by: Marc Zyngier Signed-off-by: Will Deacon --- virt/kvm/arm/vgic/vgic-mmio.c | 18 ++++++++++++++++++ virt/kvm/arm/vgic/vgic-v2.c | 5 ++++- virt/kvm/arm/vgic/vgic-v3.c | 5 ++++- 3 files changed, 26 insertions(+), 2 deletions(-) diff --git a/virt/kvm/arm/vgic/vgic-mmio.c b/virt/kvm/arm/vgic/vgic-mmio.c index 3ba7278fb533..b249220025bc 100644 --- a/virt/kvm/arm/vgic/vgic-mmio.c +++ b/virt/kvm/arm/vgic/vgic-mmio.c @@ -195,6 +195,12 @@ static void vgic_hw_irq_spending(struct kvm_vcpu *vcpu, struct vgic_irq *irq, vgic_irq_set_phys_active(irq, true); } +static bool is_vgic_v2_sgi(struct kvm_vcpu *vcpu, struct vgic_irq *irq) +{ + return (vgic_irq_is_sgi(irq->intid) && + vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2); +} + void vgic_mmio_write_spending(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len, unsigned long val) @@ -207,6 +213,12 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu, for_each_set_bit(i, &val, len * 8) { struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i); + /* GICD_ISPENDR0 SGI bits are WI */ + if (is_vgic_v2_sgi(vcpu, irq)) { + vgic_put_irq(vcpu->kvm, irq); + continue; + } + raw_spin_lock_irqsave(&irq->irq_lock, flags); if (irq->hw) vgic_hw_irq_spending(vcpu, irq, is_uaccess); @@ -254,6 +266,12 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu, for_each_set_bit(i, &val, len * 8) { struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i); + /* GICD_ICPENDR0 SGI bits are WI */ + if (is_vgic_v2_sgi(vcpu, irq)) { + vgic_put_irq(vcpu->kvm, irq); + continue; + } + raw_spin_lock_irqsave(&irq->irq_lock, flags); if (irq->hw) diff --git a/virt/kvm/arm/vgic/vgic-v2.c b/virt/kvm/arm/vgic/vgic-v2.c index 6dd5ad706c92..1059ce2ebfdf 100644 --- a/virt/kvm/arm/vgic/vgic-v2.c +++ b/virt/kvm/arm/vgic/vgic-v2.c @@ -184,7 +184,10 @@ void vgic_v2_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr) if (vgic_irq_is_sgi(irq->intid)) { u32 src = ffs(irq->source); - BUG_ON(!src); + if (WARN_RATELIMIT(!src, "No SGI source for INTID %d\n", + irq->intid)) + return; + val |= (src - 1) << GICH_LR_PHYSID_CPUID_SHIFT; irq->source &= ~(1 << (src - 1)); if (irq->source) { diff --git a/virt/kvm/arm/vgic/vgic-v3.c b/virt/kvm/arm/vgic/vgic-v3.c index c2c9ce009f63..f7a4219f4617 100644 --- a/virt/kvm/arm/vgic/vgic-v3.c +++ b/virt/kvm/arm/vgic/vgic-v3.c @@ -167,7 +167,10 @@ void vgic_v3_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr) model == KVM_DEV_TYPE_ARM_VGIC_V2) { u32 src = ffs(irq->source); - BUG_ON(!src); + if (WARN_RATELIMIT(!src, "No SGI source for INTID %d\n", + irq->intid)) + return; + val |= (src - 1) << GICH_LR_PHYSID_CPUID_SHIFT; irq->source &= ~(1 << (src - 1)); if (irq->source) { -- cgit v1.2.3 From e8c99200b4d117c340c392ebd5e62d85dfeed027 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Wed, 24 Jul 2019 17:43:06 +0800 Subject: libceph: don't call crypto_free_sync_skcipher() on a NULL tfm In set_secret(), key->tfm is assigned to NULL on line 55, and then ceph_crypto_key_destroy(key) is executed. ceph_crypto_key_destroy(key) crypto_free_sync_skcipher(key->tfm) crypto_free_skcipher(&tfm->base); This happens to work because crypto_sync_skcipher is a trivial wrapper around crypto_skcipher: &tfm->base is still 0 and crypto_free_skcipher() handles that. Let's not rely on the layout of crypto_sync_skcipher. This bug is found by a static analysis tool STCheck written by us. Fixes: 69d6302b65a8 ("libceph: Remove VLA usage of skcipher"). Signed-off-by: Jia-Ju Bai Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov --- net/ceph/crypto.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/ceph/crypto.c b/net/ceph/crypto.c index 5d6724cee38f..4f75df40fb12 100644 --- a/net/ceph/crypto.c +++ b/net/ceph/crypto.c @@ -136,8 +136,10 @@ void ceph_crypto_key_destroy(struct ceph_crypto_key *key) if (key) { kfree(key->key); key->key = NULL; - crypto_free_sync_skcipher(key->tfm); - key->tfm = NULL; + if (key->tfm) { + crypto_free_sync_skcipher(key->tfm); + key->tfm = NULL; + } } } -- cgit v1.2.3 From d435c9a7b85be1e820668d2f3718c2d9f24d5548 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Tue, 27 Aug 2019 16:45:10 +0200 Subject: rbd: restore zeroing past the overlap when reading from parent The parent image is read only up to the overlap point, the rest of the buffer should be zeroed. This snuck in because as it turns out the overlap test case has not been triggering this code path for a while now. Fixes: a9b67e69949d ("rbd: replace obj_req->tried_parent with obj_req->read_state") Signed-off-by: Ilya Dryomov Reviewed-by: Jason Dillaman --- drivers/block/rbd.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 3327192bb71f..c8fb886aebd4 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -3038,6 +3038,17 @@ again: } return true; case RBD_OBJ_READ_PARENT: + /* + * The parent image is read only up to the overlap -- zero-fill + * from the overlap to the end of the request. + */ + if (!*result) { + u32 obj_overlap = rbd_obj_img_extents_bytes(obj_req); + + if (obj_overlap < obj_req->ex.oe_len) + rbd_obj_zero_range(obj_req, obj_overlap, + obj_req->ex.oe_len - obj_overlap); + } return true; default: BUG(); -- cgit v1.2.3 From 531a64e4c35bb9844b0cf813a6c9a87e00be05ff Mon Sep 17 00:00:00 2001 From: Bernard Metzler Date: Wed, 28 Aug 2019 15:03:55 +0200 Subject: RDMA/siw: Fix IPv6 addr_list locking Walking the address list of an inet6_dev requires appropriate locking. Since the called function siw_listen_address() may sleep, we have to use rtnl_lock() instead of read_lock_bh(). Also introduces sanity checks if we got a device from in_dev_get() or in6_dev_get(). Reported-by: Bart Van Assche Fixes: 6c52fdc244b5 ("rdma/siw: connection management") Signed-off-by: Bernard Metzler Link: https://lore.kernel.org/r/20190828130355.22830-1-bmt@zurich.ibm.com Signed-off-by: Doug Ledford --- drivers/infiniband/sw/siw/siw_cm.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) diff --git a/drivers/infiniband/sw/siw/siw_cm.c b/drivers/infiniband/sw/siw/siw_cm.c index 1db5ad3d9580..8c1931a57f4a 100644 --- a/drivers/infiniband/sw/siw/siw_cm.c +++ b/drivers/infiniband/sw/siw/siw_cm.c @@ -1962,6 +1962,10 @@ int siw_create_listen(struct iw_cm_id *id, int backlog) struct sockaddr_in s_laddr, *s_raddr; const struct in_ifaddr *ifa; + if (!in_dev) { + rv = -ENODEV; + goto out; + } memcpy(&s_laddr, &id->local_addr, sizeof(s_laddr)); s_raddr = (struct sockaddr_in *)&id->remote_addr; @@ -1991,22 +1995,27 @@ int siw_create_listen(struct iw_cm_id *id, int backlog) struct sockaddr_in6 *s_laddr = &to_sockaddr_in6(id->local_addr), *s_raddr = &to_sockaddr_in6(id->remote_addr); + if (!in6_dev) { + rv = -ENODEV; + goto out; + } siw_dbg(id->device, "laddr %pI6:%d, raddr %pI6:%d\n", &s_laddr->sin6_addr, ntohs(s_laddr->sin6_port), &s_raddr->sin6_addr, ntohs(s_raddr->sin6_port)); - read_lock_bh(&in6_dev->lock); + rtnl_lock(); list_for_each_entry(ifp, &in6_dev->addr_list, if_list) { - struct sockaddr_in6 bind_addr; - + if (ifp->flags & (IFA_F_TENTATIVE | IFA_F_DEPRECATED)) + continue; if (ipv6_addr_any(&s_laddr->sin6_addr) || ipv6_addr_equal(&s_laddr->sin6_addr, &ifp->addr)) { - bind_addr.sin6_family = AF_INET6; - bind_addr.sin6_port = s_laddr->sin6_port; - bind_addr.sin6_flowinfo = 0; - bind_addr.sin6_addr = ifp->addr; - bind_addr.sin6_scope_id = dev->ifindex; + struct sockaddr_in6 bind_addr = { + .sin6_family = AF_INET6, + .sin6_port = s_laddr->sin6_port, + .sin6_flowinfo = 0, + .sin6_addr = ifp->addr, + .sin6_scope_id = dev->ifindex }; rv = siw_listen_address(id, backlog, (struct sockaddr *)&bind_addr, @@ -2015,12 +2024,12 @@ int siw_create_listen(struct iw_cm_id *id, int backlog) listeners++; } } - read_unlock_bh(&in6_dev->lock); - + rtnl_unlock(); in6_dev_put(in6_dev); } else { - return -EAFNOSUPPORT; + rv = -EAFNOSUPPORT; } +out: if (listeners) rv = 0; else if (!rv) -- cgit v1.2.3 From 42e0e95474fc6076b5cd68cab8fa0340a1797a72 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 28 Aug 2019 10:56:48 +0200 Subject: x86/build: Add -Wnoaddress-of-packed-member to REALMODE_CFLAGS, to silence GCC9 build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit One of the very few warnings I have in the current build comes from arch/x86/boot/edd.c, where I get the following with a gcc9 build: arch/x86/boot/edd.c: In function ‘query_edd’: arch/x86/boot/edd.c:148:11: warning: taking address of packed member of ‘struct boot_params’ may result in an unaligned pointer value [-Waddress-of-packed-member] 148 | mbrptr = boot_params.edd_mbr_sig_buffer; | ^~~~~~~~~~~ This warning triggers because we throw away all the CFLAGS and then make a new set for REALMODE_CFLAGS, so the -Wno-address-of-packed-member we added in the following commit is not present: 6f303d60534c ("gcc-9: silence 'address-of-packed-member' warning") The simplest solution for now is to adjust the warning for this version of CFLAGS as well, but it would definitely make sense to examine whether REALMODE_CFLAGS could be derived from CFLAGS, so that it picks up changes in the compiler flags environment automatically. Signed-off-by: Linus Torvalds Acked-by: Borislav Petkov Cc: Peter Zijlstra Cc: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 56e748a7679f..94df0868804b 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -38,6 +38,7 @@ REALMODE_CFLAGS := $(M16_CFLAGS) -g -Os -DDISABLE_BRANCH_PROFILING \ REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -ffreestanding) REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -fno-stack-protector) +REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -Wno-address-of-packed-member) REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), $(cc_stack_align4)) export REALMODE_CFLAGS -- cgit v1.2.3 From 6978bce054247e4cfccdf689ce263e076499f905 Mon Sep 17 00:00:00 2001 From: Ayan Kumar Halder Date: Wed, 28 Aug 2019 15:00:19 +0000 Subject: drm/komeda: Reordered the komeda's de-init functions The de-init routine should be doing the following in order:- 1. Unregister the drm device 2. Shut down the crtcs - failing to do this might cause a connector leakage See the 'commit 109c4d18e574 ("drm/arm/malidp: Ensure that the crtcs are shutdown before removing any encoder/connector")' 3. Disable the interrupts 4. Unbind the components 5. Free up DRM mode_config info Changes from v1:- 1. Re-ordered the header files inclusion 2. Rebased on top of the latest drm-misc-fixes Signed-off-by:. Ayan Kumar Halder Reviewed-by: Mihail Atanassov Reviewed-by: James Qian Wang (Arm Technology China) Link: https://patchwork.freedesktop.org/patch/327606/ --- drivers/gpu/drm/arm/display/komeda/komeda_kms.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_kms.c b/drivers/gpu/drm/arm/display/komeda/komeda_kms.c index 1f0e3f4e8d74..69d9e26c60c8 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_kms.c +++ b/drivers/gpu/drm/arm/display/komeda/komeda_kms.c @@ -14,8 +14,8 @@ #include #include #include -#include #include +#include #include "komeda_dev.h" #include "komeda_framebuffer.h" @@ -306,11 +306,11 @@ struct komeda_kms_dev *komeda_kms_attach(struct komeda_dev *mdev) komeda_kms_irq_handler, IRQF_SHARED, drm->driver->name, drm); if (err) - goto cleanup_mode_config; + goto free_component_binding; err = mdev->funcs->enable_irq(mdev); if (err) - goto cleanup_mode_config; + goto free_component_binding; drm->irq_enabled = true; @@ -318,15 +318,21 @@ struct komeda_kms_dev *komeda_kms_attach(struct komeda_dev *mdev) err = drm_dev_register(drm, 0); if (err) - goto cleanup_mode_config; + goto free_interrupts; return kms; -cleanup_mode_config: +free_interrupts: drm_kms_helper_poll_fini(drm); drm->irq_enabled = false; + mdev->funcs->disable_irq(mdev); +free_component_binding: + component_unbind_all(mdev->dev, drm); +cleanup_mode_config: drm_mode_config_cleanup(drm); komeda_kms_cleanup_private_objs(kms); + drm->dev_private = NULL; + drm_dev_put(drm); free_kms: kfree(kms); return ERR_PTR(err); @@ -337,13 +343,14 @@ void komeda_kms_detach(struct komeda_kms_dev *kms) struct drm_device *drm = &kms->base; struct komeda_dev *mdev = drm->dev_private; - drm->irq_enabled = false; - mdev->funcs->disable_irq(mdev); drm_dev_unregister(drm); drm_kms_helper_poll_fini(drm); + drm_atomic_helper_shutdown(drm); + drm->irq_enabled = false; + mdev->funcs->disable_irq(mdev); component_unbind_all(mdev->dev, drm); - komeda_kms_cleanup_private_objs(kms); drm_mode_config_cleanup(drm); + komeda_kms_cleanup_private_objs(kms); drm->dev_private = NULL; drm_dev_put(drm); } -- cgit v1.2.3 From a642a0b33343add9b771ce88a6c5ff6cf92f22d2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 27 Aug 2019 21:53:10 +0200 Subject: MAINTAINERS: add entry for LICENSES and SPDX stuff Thomas and I seem to have become the "unofficial" maintainers for these files and questions about SPDX things. So let's make it official. Reported-by: "Darrick J. Wong" Grumpily-acked-by: Thomas Gleixner Acked-by: Darrick J. Wong Link: https://lore.kernel.org/r/20190827195310.GA30618@kroah.com Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 43604d6ab96c..f13274f32101 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9233,6 +9233,18 @@ F: include/linux/nd.h F: include/linux/libnvdimm.h F: include/uapi/linux/ndctl.h +LICENSES and SPDX stuff +M: Thomas Gleixner +M: Greg Kroah-Hartman +L: linux-spdx@vger.kernel.org +S: Maintained +T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx.git +F: COPYING +F: Documentation/process/license-rules.rst +F: LICENSES/ +F: scripts/spdxcheck-test.sh +F: scripts/spdxcheck.py + LIGHTNVM PLATFORM SUPPORT M: Matias Bjorling W: http://github/OpenChannelSSD -- cgit v1.2.3 From 961b6ffe0e2c403b09a8efe4a2e986b3c415391a Mon Sep 17 00:00:00 2001 From: Ding Xiang Date: Wed, 21 Aug 2019 10:49:52 +0300 Subject: stm class: Fix a double free of stm_source_device In the error path of stm_source_register_device(), the kfree is unnecessary, as the put_device() before it ends up calling stm_source_device_release() to free stm_source_device, leading to a double free at the outer kfree() call. Remove it. Signed-off-by: Ding Xiang Signed-off-by: Alexander Shishkin Fixes: 7bd1d4093c2fa ("stm class: Introduce an abstraction for System Trace Module devices") Link: https://lore.kernel.org/linux-arm-kernel/1563354988-23826-1-git-send-email-dingxiang@cmss.chinamobile.com/ Cc: stable@vger.kernel.org # v4.4+ Link: https://lore.kernel.org/r/20190821074955.3925-2-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/stm/core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/hwtracing/stm/core.c b/drivers/hwtracing/stm/core.c index e55b902560de..181e7ff1ec4f 100644 --- a/drivers/hwtracing/stm/core.c +++ b/drivers/hwtracing/stm/core.c @@ -1276,7 +1276,6 @@ int stm_source_register_device(struct device *parent, err: put_device(&src->dev); - kfree(src); return err; } -- cgit v1.2.3 From 164eb56e3b64f3a816238d410c9efec7567a82ef Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Wed, 21 Aug 2019 10:49:54 +0300 Subject: intel_th: pci: Add support for another Lewisburg PCH Add support for the Trace Hub in another Lewisburg PCH. Signed-off-by: Alexander Shishkin Cc: stable@vger.kernel.org # v4.14+ Link: https://lore.kernel.org/r/20190821074955.3925-4-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/intel_th/pci.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hwtracing/intel_th/pci.c b/drivers/hwtracing/intel_th/pci.c index c0378c3de9a4..5c4e4fbec936 100644 --- a/drivers/hwtracing/intel_th/pci.c +++ b/drivers/hwtracing/intel_th/pci.c @@ -164,6 +164,11 @@ static const struct pci_device_id intel_th_pci_id_table[] = { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xa1a6), .driver_data = (kernel_ulong_t)0, }, + { + /* Lewisburg PCH */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xa226), + .driver_data = (kernel_ulong_t)0, + }, { /* Gemini Lake */ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x318e), -- cgit v1.2.3 From 9c78255fdde45c6b9a1ee30f652f7b34c727f5c7 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Wed, 21 Aug 2019 10:49:55 +0300 Subject: intel_th: pci: Add Tiger Lake support This adds support for the Trace Hub in Tiger Lake PCH. Signed-off-by: Alexander Shishkin Cc: stable@vger.kernel.org # v4.14+ Link: https://lore.kernel.org/r/20190821074955.3925-5-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/intel_th/pci.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hwtracing/intel_th/pci.c b/drivers/hwtracing/intel_th/pci.c index 5c4e4fbec936..91dfeba62485 100644 --- a/drivers/hwtracing/intel_th/pci.c +++ b/drivers/hwtracing/intel_th/pci.c @@ -204,6 +204,11 @@ static const struct pci_device_id intel_th_pci_id_table[] = { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x45c5), .driver_data = (kernel_ulong_t)&intel_th_2x, }, + { + /* Tiger Lake PCH */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xa0a6), + .driver_data = (kernel_ulong_t)&intel_th_2x, + }, { 0 }, }; -- cgit v1.2.3 From 587f17407741a5be07f8a2d1809ec946c8120962 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 19 Aug 2019 13:32:10 +0300 Subject: mei: me: add Tiger Lake point LP device ID Add Tiger Lake Point device ID for TGP LP. Signed-off-by: Tomas Winkler Cc: stable Link: https://lore.kernel.org/r/20190819103210.32748-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hw-me-regs.h | 2 ++ drivers/misc/mei/pci-me.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index 6c0173772162..77f7dff7098d 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -81,6 +81,8 @@ #define MEI_DEV_ID_ICP_LP 0x34E0 /* Ice Lake Point LP */ +#define MEI_DEV_ID_TGP_LP 0xA0E0 /* Tiger Lake Point LP */ + #define MEI_DEV_ID_MCC 0x4B70 /* Mule Creek Canyon (EHL) */ #define MEI_DEV_ID_MCC_4 0x4B75 /* Mule Creek Canyon 4 (EHL) */ diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 57cb68f5cc64..541538eff8b1 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -98,6 +98,8 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP, MEI_ME_PCH12_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_TGP_LP, MEI_ME_PCH12_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_MCC, MEI_ME_PCH12_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_MCC_4, MEI_ME_PCH8_CFG)}, -- cgit v1.2.3 From b9bc7b8b1e9e815b231c1ca0b566ee723f480987 Mon Sep 17 00:00:00 2001 From: Raul E Rangel Date: Tue, 27 Aug 2019 11:36:19 -0600 Subject: lkdtm/bugs: fix build error in lkdtm_EXHAUST_STACK lkdtm/bugs.c:94:2: error: format '%d' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Werror=format=] pr_info("Calling function with %d frame size to depth %d ...\n", ^ THREAD_SIZE is defined as a unsigned long, cast CONFIG_FRAME_WARN to unsigned long as well. Fixes: 24cccab42c419 ("lkdtm/bugs: Adjust recursion test to avoid elision") Cc: stable Signed-off-by: Raul E Rangel Acked-by: Kees Cook Link: https://lore.kernel.org/r/20190827173619.170065-1-rrangel@chromium.org Signed-off-by: Greg Kroah-Hartman --- drivers/misc/lkdtm/bugs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/misc/lkdtm/bugs.c b/drivers/misc/lkdtm/bugs.c index 1606658b9b7e..24245ccdba72 100644 --- a/drivers/misc/lkdtm/bugs.c +++ b/drivers/misc/lkdtm/bugs.c @@ -22,7 +22,7 @@ struct lkdtm_list { * recurse past the end of THREAD_SIZE by default. */ #if defined(CONFIG_FRAME_WARN) && (CONFIG_FRAME_WARN > 0) -#define REC_STACK_SIZE (CONFIG_FRAME_WARN / 2) +#define REC_STACK_SIZE (_AC(CONFIG_FRAME_WARN, UL) / 2) #else #define REC_STACK_SIZE (THREAD_SIZE / 8) #endif @@ -91,7 +91,7 @@ void lkdtm_LOOP(void) void lkdtm_EXHAUST_STACK(void) { - pr_info("Calling function with %d frame size to depth %d ...\n", + pr_info("Calling function with %lu frame size to depth %d ...\n", REC_STACK_SIZE, recur_count); recursive_loop(recur_count); pr_info("FAIL: survived without exhausting stack?!\n"); -- cgit v1.2.3 From ddaedbbece90add970faeac87f7d7d40341936ce Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 15 Aug 2019 23:25:05 +0200 Subject: Documentation/process: Embargoed hardware security issues To address the requirements of embargoed hardware issues, like Meltdown, Spectre, L1TF etc. it is necessary to define and document a process for handling embargoed hardware security issues. Following the discussion at the maintainer summit 2018 in Edinburgh (https://lwn.net/Articles/769417/) the volunteered people have worked out a process and a Memorandum of Understanding. The latter addresses the fact that the Linux kernel community cannot sign NDAs for various reasons. The initial contact point for hardware security issues is different from the regular kernel security contact to provide a known and neutral interface for hardware vendors and researchers. The initial primary contact team is proposed to be staffed by Linux Foundation Fellows, who are not associated to a vendor or a distribution and are well connected in the industry as a whole. The process is designed with the experience of the past incidents in mind and tries to address the remaining gaps, so future (hopefully rare) incidents can be handled more efficiently. It won't remove the fact, that most of this has to be done behind closed doors, but it is set up to avoid big bureaucratic hurdles for individual developers. The process is solely for handling hardware security issues and cannot be used for regular kernel (software only) security bugs. This memo can help with hardware companies who, and I quote, "[my manager] doesn't want to bet his job on the list keeping things secret." This despite numerous leaks directly from that company over the years, and none ever so far from the kernel security team. Cognitive dissidence seems to be a requirement to be a good manager. To accelerate the adoption of this process, we introduce the concept of ambassadors in participating companies. The ambassadors are there to guide people to comply with the process, but are not automatically involved in the disclosure of a particular incident. Signed-off-by: Thomas Gleixner Reviewed-by: Greg Kroah-Hartman Reviewed-by: Josh Poimboeuf Acked-by: Laura Abbott Acked-by: Ben Hutchings Reviewed-by: Tyler Hicks Reviewed-by: Konrad Rzeszutek Wilk Reviewed-by: Jiri Kosina Link: https://lore.kernel.org/r/20190815212505.GC12041@kroah.com Signed-off-by: Greg Kroah-Hartman --- .../process/embargoed-hardware-issues.rst | 279 +++++++++++++++++++++ Documentation/process/index.rst | 1 + 2 files changed, 280 insertions(+) create mode 100644 Documentation/process/embargoed-hardware-issues.rst diff --git a/Documentation/process/embargoed-hardware-issues.rst b/Documentation/process/embargoed-hardware-issues.rst new file mode 100644 index 000000000000..d37cbc502936 --- /dev/null +++ b/Documentation/process/embargoed-hardware-issues.rst @@ -0,0 +1,279 @@ +Embargoed hardware issues +========================= + +Scope +----- + +Hardware issues which result in security problems are a different category +of security bugs than pure software bugs which only affect the Linux +kernel. + +Hardware issues like Meltdown, Spectre, L1TF etc. must be treated +differently because they usually affect all Operating Systems ("OS") and +therefore need coordination across different OS vendors, distributions, +hardware vendors and other parties. For some of the issues, software +mitigations can depend on microcode or firmware updates, which need further +coordination. + +.. _Contact: + +Contact +------- + +The Linux kernel hardware security team is separate from the regular Linux +kernel security team. + +The team only handles the coordination of embargoed hardware security +issues. Reports of pure software security bugs in the Linux kernel are not +handled by this team and the reporter will be guided to contact the regular +Linux kernel security team (:ref:`Documentation/admin-guide/ +`) instead. + +The team can be contacted by email at . This +is a private list of security officers who will help you to coordinate an +issue according to our documented process. + +The list is encrypted and email to the list can be sent by either PGP or +S/MIME encrypted and must be signed with the reporter's PGP key or S/MIME +certificate. The list's PGP key and S/MIME certificate are available from +https://www.kernel.org/.... + +While hardware security issues are often handled by the affected hardware +vendor, we welcome contact from researchers or individuals who have +identified a potential hardware flaw. + +Hardware security officers +^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The current team of hardware security officers: + + - Linus Torvalds (Linux Foundation Fellow) + - Greg Kroah-Hartman (Linux Foundation Fellow) + - Thomas Gleixner (Linux Foundation Fellow) + +Operation of mailing-lists +^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The encrypted mailing-lists which are used in our process are hosted on +Linux Foundation's IT infrastructure. By providing this service Linux +Foundation's director of IT Infrastructure security technically has the +ability to access the embargoed information, but is obliged to +confidentiality by his employment contract. Linux Foundation's director of +IT Infrastructure security is also responsible for the kernel.org +infrastructure. + +The Linux Foundation's current director of IT Infrastructure security is +Konstantin Ryabitsev. + + +Non-disclosure agreements +------------------------- + +The Linux kernel hardware security team is not a formal body and therefore +unable to enter into any non-disclosure agreements. The kernel community +is aware of the sensitive nature of such issues and offers a Memorandum of +Understanding instead. + + +Memorandum of Understanding +--------------------------- + +The Linux kernel community has a deep understanding of the requirement to +keep hardware security issues under embargo for coordination between +different OS vendors, distributors, hardware vendors and other parties. + +The Linux kernel community has successfully handled hardware security +issues in the past and has the necessary mechanisms in place to allow +community compliant development under embargo restrictions. + +The Linux kernel community has a dedicated hardware security team for +initial contact, which oversees the process of handling such issues under +embargo rules. + +The hardware security team identifies the developers (domain experts) who +will form the initial response team for a particular issue. The initial +response team can bring in further developers (domain experts) to address +the issue in the best technical way. + +All involved developers pledge to adhere to the embargo rules and to keep +the received information confidential. Violation of the pledge will lead to +immediate exclusion from the current issue and removal from all related +mailing-lists. In addition, the hardware security team will also exclude +the offender from future issues. The impact of this consequence is a highly +effective deterrent in our community. In case a violation happens the +hardware security team will inform the involved parties immediately. If you +or anyone becomes aware of a potential violation, please report it +immediately to the Hardware security officers. + + +Process +^^^^^^^ + +Due to the globally distributed nature of Linux kernel development, +face-to-face meetings are almost impossible to address hardware security +issues. Phone conferences are hard to coordinate due to time zones and +other factors and should be only used when absolutely necessary. Encrypted +email has been proven to be the most effective and secure communication +method for these types of issues. + +Start of Disclosure +""""""""""""""""""" + +Disclosure starts by contacting the Linux kernel hardware security team by +email. This initial contact should contain a description of the problem and +a list of any known affected hardware. If your organization builds or +distributes the affected hardware, we encourage you to also consider what +other hardware could be affected. + +The hardware security team will provide an incident-specific encrypted +mailing-list which will be used for initial discussion with the reporter, +further disclosure and coordination. + +The hardware security team will provide the disclosing party a list of +developers (domain experts) who should be informed initially about the +issue after confirming with the developers that they will adhere to this +Memorandum of Understanding and the documented process. These developers +form the initial response team and will be responsible for handling the +issue after initial contact. The hardware security team is supporting the +response team, but is not necessarily involved in the mitigation +development process. + +While individual developers might be covered by a non-disclosure agreement +via their employer, they cannot enter individual non-disclosure agreements +in their role as Linux kernel developers. They will, however, agree to +adhere to this documented process and the Memorandum of Understanding. + + +Disclosure +"""""""""" + +The disclosing party provides detailed information to the initial response +team via the specific encrypted mailing-list. + +From our experience the technical documentation of these issues is usually +a sufficient starting point and further technical clarification is best +done via email. + +Mitigation development +"""""""""""""""""""""" + +The initial response team sets up an encrypted mailing-list or repurposes +an existing one if appropriate. The disclosing party should provide a list +of contacts for all other parties who have already been, or should be +informed about the issue. The response team contacts these parties so they +can name experts who should be subscribed to the mailing-list. + +Using a mailing-list is close to the normal Linux development process and +has been successfully used in developing mitigations for various hardware +security issues in the past. + +The mailing-list operates in the same way as normal Linux development. +Patches are posted, discussed and reviewed and if agreed on applied to a +non-public git repository which is only accessible to the participating +developers via a secure connection. The repository contains the main +development branch against the mainline kernel and backport branches for +stable kernel versions as necessary. + +The initial response team will identify further experts from the Linux +kernel developer community as needed and inform the disclosing party about +their participation. Bringing in experts can happen at any time of the +development process and often needs to be handled in a timely manner. + +Coordinated release +""""""""""""""""""" + +The involved parties will negotiate the date and time where the embargo +ends. At that point the prepared mitigations are integrated into the +relevant kernel trees and published. + +While we understand that hardware security issues need coordinated embargo +time, the embargo time should be constrained to the minimum time which is +required for all involved parties to develop, test and prepare the +mitigations. Extending embargo time artificially to meet conference talk +dates or other non-technical reasons is creating more work and burden for +the involved developers and response teams as the patches need to be kept +up to date in order to follow the ongoing upstream kernel development, +which might create conflicting changes. + +CVE assignment +"""""""""""""" + +Neither the hardware security team nor the initial response team assign +CVEs, nor are CVEs required for the development process. If CVEs are +provided by the disclosing party they can be used for documentation +purposes. + +Process ambassadors +------------------- + +For assistance with this process we have established ambassadors in various +organizations, who can answer questions about or provide guidance on the +reporting process and further handling. Ambassadors are not involved in the +disclosure of a particular issue, unless requested by a response team or by +an involved disclosed party. The current ambassadors list: + + ============= ======================================================== + ARM + AMD + IBM + Intel + Qualcomm + + Microsoft + VMware + XEN + + Canonical Tyler Hicks + Debian Ben Hutchings + Oracle Konrad Rzeszutek Wilk + Red Hat Josh Poimboeuf + SUSE Jiri Kosina + + Amazon + Google + ============== ======================================================== + +If you want your organization to be added to the ambassadors list, please +contact the hardware security team. The nominated ambassador has to +understand and support our process fully and is ideally well connected in +the Linux kernel community. + +Encrypted mailing-lists +----------------------- + +We use encrypted mailing-lists for communication. The operating principle +of these lists is that email sent to the list is encrypted either with the +list's PGP key or with the list's S/MIME certificate. The mailing-list +software decrypts the email and re-encrypts it individually for each +subscriber with the subscriber's PGP key or S/MIME certificate. Details +about the mailing-list software and the setup which is used to ensure the +security of the lists and protection of the data can be found here: +https://www.kernel.org/.... + +List keys +^^^^^^^^^ + +For initial contact see :ref:`Contact`. For incident specific mailing-lists +the key and S/MIME certificate are conveyed to the subscribers by email +sent from the specific list. + +Subscription to incident specific lists +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Subscription is handled by the response teams. Disclosed parties who want +to participate in the communication send a list of potential subscribers to +the response team so the response team can validate subscription requests. + +Each subscriber needs to send a subscription request to the response team +by email. The email must be signed with the subscriber's PGP key or S/MIME +certificate. If a PGP key is used, it must be available from a public key +server and is ideally connected to the Linux kernel's PGP web of trust. See +also: https://www.kernel.org/signature.html. + +The response team verifies that the subscriber request is valid and adds +the subscriber to the list. After subscription the subscriber will receive +email from the mailing-list which is signed either with the list's PGP key +or the list's S/MIME certificate. The subscriber's email client can extract +the PGP key or the S/MIME certificate from the signature so the subscriber +can send encrypted email to the list. + diff --git a/Documentation/process/index.rst b/Documentation/process/index.rst index 878ebfda7eef..e2c9ffc682c5 100644 --- a/Documentation/process/index.rst +++ b/Documentation/process/index.rst @@ -45,6 +45,7 @@ Other guides to the community that are of interest to most developers are: submit-checklist kernel-docs deprecated + embargoed-hardware-issues These are some overall technical guides that have been put here for now for lack of a better place. -- cgit v1.2.3 From a684d8fd87182090ee96e34519ecdf009cef093a Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 22 Aug 2019 14:52:12 +0100 Subject: typec: tcpm: fix a typo in the comparison of pdo_max_voltage There appears to be a typo in the comparison of pdo_max_voltage[i] with the previous value, currently it is checking against the array pdo_min_voltage rather than pdo_max_voltage. I believe this is a typo. Fix this. Addresses-Coverity: ("Copy-paste error") Fixes: 5007e1b5db73 ("typec: tcpm: Validate source and sink caps") Cc: stable Signed-off-by: Colin Ian King Reviewed-by: Guenter Roeck Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20190822135212.10195-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 15abe1d9958f..bcfdb55fd198 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -1446,7 +1446,7 @@ static enum pdo_err tcpm_caps_err(struct tcpm_port *port, const u32 *pdo, else if ((pdo_min_voltage(pdo[i]) == pdo_min_voltage(pdo[i - 1])) && (pdo_max_voltage(pdo[i]) == - pdo_min_voltage(pdo[i - 1]))) + pdo_max_voltage(pdo[i - 1]))) return PDO_ERR_DUPE_PDO; break; /* -- cgit v1.2.3 From 76da906ad727048a74bb8067031ee99fc070c7da Mon Sep 17 00:00:00 2001 From: "Schmid, Carsten" Date: Fri, 23 Aug 2019 14:11:28 +0000 Subject: usb: hcd: use managed device resources Using managed device resources in usb_hcd_pci_probe() allows devm usage for resource subranges, such as the mmio resource for the platform device created to control host/device mode mux, which is a xhci extended capability, and sits inside the xhci mmio region. If managed device resources are not used then "parent" resource is released before subrange at driver removal as .remove callback is called before the devres list of resources for this device is walked and released. This has been observed with the xhci extended capability driver causing a use-after-free which is now fixed. An additional nice benefit is that error handling on driver initialisation is simplified much. Signed-off-by: Carsten Schmid Tested-by: Carsten Schmid Reviewed-by: Mathias Nyman Fixes: fa31b3cb2ae1 ("xhci: Add Intel extended cap / otg phy mux handling") Cc: # v4.19+ Link: https://lore.kernel.org/r/1566569488679.31808@mentor.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd-pci.c | 30 ++++++++---------------------- 1 file changed, 8 insertions(+), 22 deletions(-) diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 03432467b05f..7537681355f6 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -216,17 +216,18 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) /* EHCI, OHCI */ hcd->rsrc_start = pci_resource_start(dev, 0); hcd->rsrc_len = pci_resource_len(dev, 0); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, - driver->description)) { + if (!devm_request_mem_region(&dev->dev, hcd->rsrc_start, + hcd->rsrc_len, driver->description)) { dev_dbg(&dev->dev, "controller already in use\n"); retval = -EBUSY; goto put_hcd; } - hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_ioremap_nocache(&dev->dev, hcd->rsrc_start, + hcd->rsrc_len); if (hcd->regs == NULL) { dev_dbg(&dev->dev, "error mapping memory\n"); retval = -EFAULT; - goto release_mem_region; + goto put_hcd; } } else { @@ -240,8 +241,8 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) hcd->rsrc_start = pci_resource_start(dev, region); hcd->rsrc_len = pci_resource_len(dev, region); - if (request_region(hcd->rsrc_start, hcd->rsrc_len, - driver->description)) + if (devm_request_region(&dev->dev, hcd->rsrc_start, + hcd->rsrc_len, driver->description)) break; } if (region == PCI_ROM_RESOURCE) { @@ -275,20 +276,13 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } if (retval != 0) - goto unmap_registers; + goto put_hcd; device_wakeup_enable(hcd->self.controller); if (pci_dev_run_wake(dev)) pm_runtime_put_noidle(&dev->dev); return retval; -unmap_registers: - if (driver->flags & HCD_MEMORY) { - iounmap(hcd->regs); -release_mem_region: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - } else - release_region(hcd->rsrc_start, hcd->rsrc_len); put_hcd: usb_put_hcd(hcd); disable_pci: @@ -347,14 +341,6 @@ void usb_hcd_pci_remove(struct pci_dev *dev) dev_set_drvdata(&dev->dev, NULL); up_read(&companions_rwsem); } - - if (hcd->driver->flags & HCD_MEMORY) { - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - } else { - release_region(hcd->rsrc_start, hcd->rsrc_len); - } - usb_put_hcd(hcd); pci_disable_device(dev); } -- cgit v1.2.3 From a349b95d7ca0cea71be4a7dac29830703de7eb62 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 27 Aug 2019 12:51:50 +0900 Subject: usb: host: ohci: fix a race condition between shutdown and irq This patch fixes an issue that the following error is possible to happen when ohci hardware causes an interruption and the system is shutting down at the same time. [ 34.851754] usb 2-1: USB disconnect, device number 2 [ 35.166658] irq 156: nobody cared (try booting with the "irqpoll" option) [ 35.173445] CPU: 0 PID: 22 Comm: kworker/0:1 Not tainted 5.3.0-rc5 #85 [ 35.179964] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 35.187886] Workqueue: usb_hub_wq hub_event [ 35.192063] Call trace: [ 35.194509] dump_backtrace+0x0/0x150 [ 35.198165] show_stack+0x14/0x20 [ 35.201475] dump_stack+0xa0/0xc4 [ 35.204785] __report_bad_irq+0x34/0xe8 [ 35.208614] note_interrupt+0x2cc/0x318 [ 35.212446] handle_irq_event_percpu+0x5c/0x88 [ 35.216883] handle_irq_event+0x48/0x78 [ 35.220712] handle_fasteoi_irq+0xb4/0x188 [ 35.224802] generic_handle_irq+0x24/0x38 [ 35.228804] __handle_domain_irq+0x5c/0xb0 [ 35.232893] gic_handle_irq+0x58/0xa8 [ 35.236548] el1_irq+0xb8/0x180 [ 35.239681] __do_softirq+0x94/0x23c [ 35.243253] irq_exit+0xd0/0xd8 [ 35.246387] __handle_domain_irq+0x60/0xb0 [ 35.250475] gic_handle_irq+0x58/0xa8 [ 35.254130] el1_irq+0xb8/0x180 [ 35.257268] kernfs_find_ns+0x5c/0x120 [ 35.261010] kernfs_find_and_get_ns+0x3c/0x60 [ 35.265361] sysfs_unmerge_group+0x20/0x68 [ 35.269454] dpm_sysfs_remove+0x2c/0x68 [ 35.273284] device_del+0x80/0x370 [ 35.276683] hid_destroy_device+0x28/0x60 [ 35.280686] usbhid_disconnect+0x4c/0x80 [ 35.284602] usb_unbind_interface+0x6c/0x268 [ 35.288867] device_release_driver_internal+0xe4/0x1b0 [ 35.293998] device_release_driver+0x14/0x20 [ 35.298261] bus_remove_device+0x110/0x128 [ 35.302350] device_del+0x148/0x370 [ 35.305832] usb_disable_device+0x8c/0x1d0 [ 35.309921] usb_disconnect+0xc8/0x2d0 [ 35.313663] hub_event+0x6e0/0x1128 [ 35.317146] process_one_work+0x1e0/0x320 [ 35.321148] worker_thread+0x40/0x450 [ 35.324805] kthread+0x124/0x128 [ 35.328027] ret_from_fork+0x10/0x18 [ 35.331594] handlers: [ 35.333862] [<0000000079300c1d>] usb_hcd_irq [ 35.338126] [<0000000079300c1d>] usb_hcd_irq [ 35.342389] Disabling IRQ #156 ohci_shutdown() disables all the interrupt and rh_state is set to OHCI_RH_HALTED. In other hand, ohci_irq() is possible to enable OHCI_INTR_SF and OHCI_INTR_MIE on ohci_irq(). Note that OHCI_INTR_SF is possible to be set by start_ed_unlink() which is called: ohci_irq() -> process_done_list() -> takeback_td() -> start_ed_unlink() So, ohci_irq() has the following condition, the issue happens by &ohci->regs->intrenable = OHCI_INTR_MIE | OHCI_INTR_SF and ohci->rh_state = OHCI_RH_HALTED: /* interrupt for some other device? */ if (ints == 0 || unlikely(ohci->rh_state == OHCI_RH_HALTED)) return IRQ_NOTMINE; To fix the issue, ohci_shutdown() holds the spin lock while disabling the interruption and changing the rh_state flag to prevent reenable the OHCI_INTR_MIE unexpectedly. Note that io_watchdog_func() also calls the ohci_shutdown() and it already held the spin lock, so that the patch makes a new function as _ohci_shutdown(). This patch is inspired by a Renesas R-Car Gen3 BSP patch from Tho Vu. Signed-off-by: Yoshihiro Shimoda Cc: stable Acked-by: Alan Stern Link: https://lore.kernel.org/r/1566877910-6020-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hcd.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index b457fdaff297..1fe3deec35cf 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -419,8 +419,7 @@ static void ohci_usb_reset (struct ohci_hcd *ohci) * other cases where the next software may expect clean state from the * "firmware". this is bus-neutral, unlike shutdown() methods. */ -static void -ohci_shutdown (struct usb_hcd *hcd) +static void _ohci_shutdown(struct usb_hcd *hcd) { struct ohci_hcd *ohci; @@ -436,6 +435,16 @@ ohci_shutdown (struct usb_hcd *hcd) ohci->rh_state = OHCI_RH_HALTED; } +static void ohci_shutdown(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + unsigned long flags; + + spin_lock_irqsave(&ohci->lock, flags); + _ohci_shutdown(hcd); + spin_unlock_irqrestore(&ohci->lock, flags); +} + /*-------------------------------------------------------------------------* * HC functions *-------------------------------------------------------------------------*/ @@ -760,7 +769,7 @@ static void io_watchdog_func(struct timer_list *t) died: usb_hc_died(ohci_to_hcd(ohci)); ohci_dump(ohci); - ohci_shutdown(ohci_to_hcd(ohci)); + _ohci_shutdown(ohci_to_hcd(ohci)); goto done; } else { /* No write back because the done queue was empty */ -- cgit v1.2.3 From f6445b6b2f2bb1745080af4a0926049e8bca2617 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 28 Aug 2019 01:34:49 +0800 Subject: USB: storage: ums-realtek: Update module parameter description for auto_delink_en The option named "auto_delink_en" is a bit misleading, as setting it to false doesn't really disable auto-delink but let auto-delink be firmware controlled. Update the description to reflect the real usage of this parameter. Signed-off-by: Kai-Heng Feng Cc: stable Link: https://lore.kernel.org/r/20190827173450.13572-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/realtek_cr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index cc794e25a0b6..beaffac805af 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -38,7 +38,7 @@ MODULE_LICENSE("GPL"); static int auto_delink_en = 1; module_param(auto_delink_en, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(auto_delink_en, "enable auto delink"); +MODULE_PARM_DESC(auto_delink_en, "auto delink mode (0=firmware, 1=software [default])"); #ifdef CONFIG_REALTEK_AUTOPM static int ss_en = 1; -- cgit v1.2.3 From 1902a01e2bcc3abd7c9a18dc05e78c7ab4a53c54 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 28 Aug 2019 01:34:50 +0800 Subject: USB: storage: ums-realtek: Whitelist auto-delink support Auto-delink requires writing special registers to ums-realtek devices. Unconditionally enable auto-delink may break newer devices. So only enable auto-delink by default for the original three IDs, 0x0138, 0x0158 and 0x0159. Realtek is working on a patch to properly support auto-delink for other IDs. BugLink: https://bugs.launchpad.net/bugs/1838886 Signed-off-by: Kai-Heng Feng Acked-by: Alan Stern Cc: stable Link: https://lore.kernel.org/r/20190827173450.13572-2-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/realtek_cr.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index beaffac805af..1d9ce9cbc831 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -996,12 +996,15 @@ static int init_realtek_cr(struct us_data *us) goto INIT_FAIL; } - if (CHECK_FW_VER(chip, 0x5888) || CHECK_FW_VER(chip, 0x5889) || - CHECK_FW_VER(chip, 0x5901)) - SET_AUTO_DELINK(chip); - if (STATUS_LEN(chip) == 16) { - if (SUPPORT_AUTO_DELINK(chip)) + if (CHECK_PID(chip, 0x0138) || CHECK_PID(chip, 0x0158) || + CHECK_PID(chip, 0x0159)) { + if (CHECK_FW_VER(chip, 0x5888) || CHECK_FW_VER(chip, 0x5889) || + CHECK_FW_VER(chip, 0x5901)) SET_AUTO_DELINK(chip); + if (STATUS_LEN(chip) == 16) { + if (SUPPORT_AUTO_DELINK(chip)) + SET_AUTO_DELINK(chip); + } } #ifdef CONFIG_REALTEK_AUTOPM if (ss_en) -- cgit v1.2.3 From 993cc8753453fccfe060a535bbe21fcf1001b626 Mon Sep 17 00:00:00 2001 From: Nagarjuna Kristam Date: Wed, 28 Aug 2019 16:24:57 +0530 Subject: usb: host: xhci-tegra: Set DMA mask correctly The Falcon microcontroller that runs the XUSB firmware and which is responsible for exposing the XHCI interface can address only 40 bits of memory. Typically that's not a problem because Tegra devices don't have enough system memory to exceed those 40 bits. However, if the ARM SMMU is enable on Tegra186 and later, the addresses passed to the XUSB controller can be anywhere in the 48-bit IOV address space of the ARM SMMU. Since the DMA/IOMMU API starts allocating from the top of the IOVA space, the Falcon microcontroller is not able to load the firmware successfully. Fix this by setting the DMA mask to 40 bits, which will force the DMA API to map the buffer for the firmware to an IOVA that is addressable by the Falcon. Signed-off-by: Nagarjuna Kristam Signed-off-by: Thierry Reding Link: https://lore.kernel.org/r/1566989697-13049-1-git-send-email-nkristam@nvidia.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-tegra.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index dafc65911fc0..2ff7c911fbd0 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1194,6 +1194,16 @@ static int tegra_xusb_probe(struct platform_device *pdev) tegra_xusb_config(tegra, regs); + /* + * The XUSB Falcon microcontroller can only address 40 bits, so set + * the DMA mask accordingly. + */ + err = dma_set_mask_and_coherent(tegra->dev, DMA_BIT_MASK(40)); + if (err < 0) { + dev_err(&pdev->dev, "failed to set DMA mask: %d\n", err); + goto put_rpm; + } + err = tegra_xusb_load_firmware(tegra); if (err < 0) { dev_err(&pdev->dev, "failed to load firmware: %d\n", err); -- cgit v1.2.3 From 636bd02a7ba9025ff851d0cfb92768c8fa865859 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 27 Aug 2019 14:51:12 +0200 Subject: usb: host: xhci: rcar: Fix typo in compatible string matching It's spelled "renesas", not "renensas". Due to this typo, RZ/G1M and RZ/G1N were not covered by the check. Fixes: 2dc240a3308b ("usb: host: xhci: rcar: retire use of xhci_plat_type_is()") Signed-off-by: Geert Uytterhoeven Cc: stable Reviewed-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/20190827125112.12192-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-rcar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c index 8616c52849c6..2b0ccd150209 100644 --- a/drivers/usb/host/xhci-rcar.c +++ b/drivers/usb/host/xhci-rcar.c @@ -104,7 +104,7 @@ static int xhci_rcar_is_gen2(struct device *dev) return of_device_is_compatible(node, "renesas,xhci-r8a7790") || of_device_is_compatible(node, "renesas,xhci-r8a7791") || of_device_is_compatible(node, "renesas,xhci-r8a7793") || - of_device_is_compatible(node, "renensas,rcar-gen2-xhci"); + of_device_is_compatible(node, "renesas,rcar-gen2-xhci"); } static int xhci_rcar_is_gen3(struct device *dev) -- cgit v1.2.3 From 1426bd2c9f7e3126e2678e7469dca9fd9fc6dd3e Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 27 Aug 2019 12:34:36 +0200 Subject: USB: cdc-wdm: fix race between write and disconnect due to flag abuse In case of a disconnect an ongoing flush() has to be made fail. Nevertheless we cannot be sure that any pending URB has already finished, so although they will never succeed, they still must not be touched. The clean solution for this is to check for WDM_IN_USE and WDM_DISCONNECTED in flush(). There is no point in ever clearing WDM_IN_USE, as no further writes make sense. The issue is as old as the driver. Fixes: afba937e540c9 ("USB: CDC WDM driver") Reported-by: syzbot+d232cca6ec42c2edb3fc@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Cc: stable Link: https://lore.kernel.org/r/20190827103436.21143-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index a7824a51f86d..70afb2ca1eab 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -587,10 +587,20 @@ static int wdm_flush(struct file *file, fl_owner_t id) { struct wdm_device *desc = file->private_data; - wait_event(desc->wait, !test_bit(WDM_IN_USE, &desc->flags)); + wait_event(desc->wait, + /* + * needs both flags. We cannot do with one + * because resetting it would cause a race + * with write() yet we need to signal + * a disconnect + */ + !test_bit(WDM_IN_USE, &desc->flags) || + test_bit(WDM_DISCONNECTING, &desc->flags)); /* cannot dereference desc->intf if WDM_DISCONNECTING */ - if (desc->werr < 0 && !test_bit(WDM_DISCONNECTING, &desc->flags)) + if (test_bit(WDM_DISCONNECTING, &desc->flags)) + return -ENODEV; + if (desc->werr < 0) dev_err(&desc->intf->dev, "Error in flush path: %d\n", desc->werr); @@ -974,8 +984,6 @@ static void wdm_disconnect(struct usb_interface *intf) spin_lock_irqsave(&desc->iuspin, flags); set_bit(WDM_DISCONNECTING, &desc->flags); set_bit(WDM_READ, &desc->flags); - /* to terminate pending flushes */ - clear_bit(WDM_IN_USE, &desc->flags); spin_unlock_irqrestore(&desc->iuspin, flags); wake_up_all(&desc->wait); mutex_lock(&desc->rlock); -- cgit v1.2.3 From ba03a9bbd17b149c373c0ea44017f35fc2cd0f28 Mon Sep 17 00:00:00 2001 From: Nadav Amit Date: Tue, 20 Aug 2019 13:26:38 -0700 Subject: VMCI: Release resource if the work is already queued Francois reported that VMware balloon gets stuck after a balloon reset, when the VMCI doorbell is removed. A similar error can occur when the balloon driver is removed with the following splat: [ 1088.622000] INFO: task modprobe:3565 blocked for more than 120 seconds. [ 1088.622035] Tainted: G W 5.2.0 #4 [ 1088.622087] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1088.622205] modprobe D 0 3565 1450 0x00000000 [ 1088.622210] Call Trace: [ 1088.622246] __schedule+0x2a8/0x690 [ 1088.622248] schedule+0x2d/0x90 [ 1088.622250] schedule_timeout+0x1d3/0x2f0 [ 1088.622252] wait_for_completion+0xba/0x140 [ 1088.622320] ? wake_up_q+0x80/0x80 [ 1088.622370] vmci_resource_remove+0xb9/0xc0 [vmw_vmci] [ 1088.622373] vmci_doorbell_destroy+0x9e/0xd0 [vmw_vmci] [ 1088.622379] vmballoon_vmci_cleanup+0x6e/0xf0 [vmw_balloon] [ 1088.622381] vmballoon_exit+0x18/0xcc8 [vmw_balloon] [ 1088.622394] __x64_sys_delete_module+0x146/0x280 [ 1088.622408] do_syscall_64+0x5a/0x130 [ 1088.622410] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1088.622415] RIP: 0033:0x7f54f62791b7 [ 1088.622421] Code: Bad RIP value. [ 1088.622421] RSP: 002b:00007fff2a949008 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 1088.622426] RAX: ffffffffffffffda RBX: 000055dff8b55d00 RCX: 00007f54f62791b7 [ 1088.622426] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055dff8b55d68 [ 1088.622427] RBP: 000055dff8b55d00 R08: 00007fff2a947fb1 R09: 0000000000000000 [ 1088.622427] R10: 00007f54f62f5cc0 R11: 0000000000000206 R12: 000055dff8b55d68 [ 1088.622428] R13: 0000000000000001 R14: 000055dff8b55d68 R15: 00007fff2a94a3f0 The cause for the bug is that when the "delayed" doorbell is invoked, it takes a reference on the doorbell entry and schedules work that is supposed to run the appropriate code and drop the doorbell entry reference. The code ignores the fact that if the work is already queued, it will not be scheduled to run one more time. As a result one of the references would not be dropped. When the code waits for the reference to get to zero, during balloon reset or module removal, it gets stuck. Fix it. Drop the reference if schedule_work() indicates that the work is already queued. Note that this bug got more apparent (or apparent at all) due to commit ce664331b248 ("vmw_balloon: VMCI_DOORBELL_SET does not check status"). Fixes: 83e2ec765be03 ("VMCI: doorbell implementation.") Reported-by: Francois Rigault Cc: Jorgen Hansen Cc: Adit Ranadive Cc: Alexios Zavras Cc: Vishnu DASA Cc: stable@vger.kernel.org Signed-off-by: Nadav Amit Reviewed-by: Vishnu Dasa Link: https://lore.kernel.org/r/20190820202638.49003-1-namit@vmware.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/vmw_vmci/vmci_doorbell.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/misc/vmw_vmci/vmci_doorbell.c b/drivers/misc/vmw_vmci/vmci_doorbell.c index bad89b6e0802..345addd9306d 100644 --- a/drivers/misc/vmw_vmci/vmci_doorbell.c +++ b/drivers/misc/vmw_vmci/vmci_doorbell.c @@ -310,7 +310,8 @@ int vmci_dbell_host_context_notify(u32 src_cid, struct vmci_handle handle) entry = container_of(resource, struct dbell_entry, resource); if (entry->run_delayed) { - schedule_work(&entry->work); + if (!schedule_work(&entry->work)) + vmci_resource_put(resource); } else { entry->notify_cb(entry->client_data); vmci_resource_put(resource); @@ -361,7 +362,8 @@ static void dbell_fire_entries(u32 notify_idx) atomic_read(&dbell->active) == 1) { if (dbell->run_delayed) { vmci_resource_get(&dbell->resource); - schedule_work(&dbell->work); + if (!schedule_work(&dbell->work)) + vmci_resource_put(&dbell->resource); } else { dbell->notify_cb(dbell->client_data); } -- cgit v1.2.3 From 468e0ffac803f5557a62a33b72ef8844d1bfdc08 Mon Sep 17 00:00:00 2001 From: Nadav Amit Date: Tue, 20 Aug 2019 09:01:21 -0700 Subject: vmw_balloon: Fix offline page marking with compaction The compaction code already marks pages as offline when it enqueues pages in the ballooned page list, and removes the mapping when the pages are removed from the list. VMware balloon also updates the flags, instead of letting the balloon-compaction logic handle it, which causes the assertion VM_BUG_ON_PAGE(!PageOffline(page)) to fire, when __ClearPageOffline is called the second time. This causes the following crash. [ 487.104520] kernel BUG at include/linux/page-flags.h:749! [ 487.106364] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI [ 487.107681] CPU: 7 PID: 1106 Comm: kworker/7:3 Not tainted 5.3.0-rc5balloon #227 [ 487.109196] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 12/12/2018 [ 487.111452] Workqueue: events_freezable vmballoon_work [vmw_balloon] [ 487.112779] RIP: 0010:vmballoon_release_page_list+0xaa/0x100 [vmw_balloon] [ 487.114200] Code: fe 48 c1 e7 06 4c 01 c7 8b 47 30 41 89 c1 41 81 e1 00 01 00 f0 41 81 f9 00 00 00 f0 74 d3 48 c7 c6 08 a1 a1 c0 e8 06 0d e7 ea <0f> 0b 44 89 f6 4c 89 c7 e8 49 9c e9 ea 49 8d 75 08 49 8b 45 08 4d [ 487.118033] RSP: 0018:ffffb82f012bbc98 EFLAGS: 00010246 [ 487.119135] RAX: 0000000000000037 RBX: 0000000000000001 RCX: 0000000000000006 [ 487.120601] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9a85b6bd7620 [ 487.122071] RBP: ffffb82f012bbcc0 R08: 0000000000000001 R09: 0000000000000000 [ 487.123536] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb82f012bbd00 [ 487.125002] R13: ffffe97f4598d9c0 R14: 0000000000000000 R15: ffffb82f012bbd34 [ 487.126463] FS: 0000000000000000(0000) GS:ffff9a85b6bc0000(0000) knlGS:0000000000000000 [ 487.128110] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 487.129316] CR2: 00007ffe6e413ea0 CR3: 0000000230b18001 CR4: 00000000003606e0 [ 487.130812] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 487.132283] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 487.133749] Call Trace: [ 487.134333] vmballoon_deflate+0x22c/0x390 [vmw_balloon] [ 487.135468] vmballoon_work+0x6e7/0x913 [vmw_balloon] [ 487.136711] ? process_one_work+0x21a/0x5e0 [ 487.138581] process_one_work+0x298/0x5e0 [ 487.139926] ? vmballoon_migratepage+0x310/0x310 [vmw_balloon] [ 487.141610] ? process_one_work+0x298/0x5e0 [ 487.143053] worker_thread+0x41/0x400 [ 487.144389] kthread+0x12b/0x150 [ 487.145582] ? process_one_work+0x5e0/0x5e0 [ 487.146937] ? kthread_create_on_node+0x60/0x60 [ 487.148637] ret_from_fork+0x3a/0x50 Fix it by updating the PageOffline indication only when a 2MB page is enqueued and dequeued. The 4KB pages will be handled correctly by the balloon compaction logic. Fixes: 83a8afa72e9c ("vmw_balloon: Compaction support") Cc: David Hildenbrand Reported-by: Thomas Hellstrom Signed-off-by: Nadav Amit Link: https://lore.kernel.org/r/20190820160121.452-1-namit@vmware.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/vmw_balloon.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c index 8840299420e0..5e6be1527571 100644 --- a/drivers/misc/vmw_balloon.c +++ b/drivers/misc/vmw_balloon.c @@ -691,7 +691,6 @@ static int vmballoon_alloc_page_list(struct vmballoon *b, } if (page) { - vmballoon_mark_page_offline(page, ctl->page_size); /* Success. Add the page to the list and continue. */ list_add(&page->lru, &ctl->pages); continue; @@ -930,7 +929,6 @@ static void vmballoon_release_page_list(struct list_head *page_list, list_for_each_entry_safe(page, tmp, page_list, lru) { list_del(&page->lru); - vmballoon_mark_page_online(page, page_size); __free_pages(page, vmballoon_page_order(page_size)); } @@ -1005,6 +1003,7 @@ static void vmballoon_enqueue_page_list(struct vmballoon *b, enum vmballoon_page_size_type page_size) { unsigned long flags; + struct page *page; if (page_size == VMW_BALLOON_4K_PAGE) { balloon_page_list_enqueue(&b->b_dev_info, pages); @@ -1014,6 +1013,11 @@ static void vmballoon_enqueue_page_list(struct vmballoon *b, * for the balloon compaction mechanism. */ spin_lock_irqsave(&b->b_dev_info.pages_lock, flags); + + list_for_each_entry(page, pages, lru) { + vmballoon_mark_page_offline(page, VMW_BALLOON_2M_PAGE); + } + list_splice_init(pages, &b->huge_pages); __count_vm_events(BALLOON_INFLATE, *n_pages * vmballoon_page_in_frames(VMW_BALLOON_2M_PAGE)); @@ -1056,6 +1060,8 @@ static void vmballoon_dequeue_page_list(struct vmballoon *b, /* 2MB pages */ spin_lock_irqsave(&b->b_dev_info.pages_lock, flags); list_for_each_entry_safe(page, tmp, &b->huge_pages, lru) { + vmballoon_mark_page_online(page, VMW_BALLOON_2M_PAGE); + list_move(&page->lru, pages); if (++i == n_req_pages) break; -- cgit v1.2.3 From 8919dfcb31161fae7d607bbef5247e5e82fd6457 Mon Sep 17 00:00:00 2001 From: Eddie James Date: Tue, 27 Aug 2019 12:12:49 +0800 Subject: fsi: scom: Don't abort operations for minor errors The scom driver currently fails out of operations if certain system errors are flagged in the status register; system checkstop, special attention, or recoverable error. These errors won't impact the ability of the scom engine to perform operations, so the driver should continue under these conditions. Also, don't do a PIB reset for these conditions, since it won't help. Fixes: 6b293258cded ("fsi: scom: Major overhaul") Signed-off-by: Eddie James Cc: stable Acked-by: Jeremy Kerr Acked-by: Benjamin Herrenschmidt Signed-off-by: Joel Stanley Link: https://lore.kernel.org/r/20190827041249.13381-1-jk@ozlabs.org Signed-off-by: Greg Kroah-Hartman --- drivers/fsi/fsi-scom.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/fsi/fsi-scom.c b/drivers/fsi/fsi-scom.c index 343153d47e5b..004dc03ccf09 100644 --- a/drivers/fsi/fsi-scom.c +++ b/drivers/fsi/fsi-scom.c @@ -38,8 +38,7 @@ #define SCOM_STATUS_PIB_RESP_MASK 0x00007000 #define SCOM_STATUS_PIB_RESP_SHIFT 12 -#define SCOM_STATUS_ANY_ERR (SCOM_STATUS_ERR_SUMMARY | \ - SCOM_STATUS_PROTECTION | \ +#define SCOM_STATUS_ANY_ERR (SCOM_STATUS_PROTECTION | \ SCOM_STATUS_PARITY | \ SCOM_STATUS_PIB_ABORT | \ SCOM_STATUS_PIB_RESP_MASK) @@ -251,11 +250,6 @@ static int handle_fsi2pib_status(struct scom_device *scom, uint32_t status) /* Return -EBUSY on PIB abort to force a retry */ if (status & SCOM_STATUS_PIB_ABORT) return -EBUSY; - if (status & SCOM_STATUS_ERR_SUMMARY) { - fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy, - sizeof(uint32_t)); - return -EIO; - } return 0; } -- cgit v1.2.3 From abecec415dc2b5a5d11fe1b17963564b13f2ff20 Mon Sep 17 00:00:00 2001 From: Yash Shah Date: Tue, 27 Aug 2019 10:36:03 +0530 Subject: macb: bindings doc: update sifive fu540-c000 binding As per the discussion with Nicolas Ferre[0], rename the compatible property to a more appropriate and specific string. [0] https://lore.kernel.org/netdev/CAJ2_jOFEVZQat0Yprg4hem4jRrqkB72FKSeQj4p8P5KA-+rgww@mail.gmail.com/ Signed-off-by: Yash Shah Acked-by: Nicolas Ferre Reviewed-by: Paul Walmsley Reviewed-by: Rob Herring Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/macb.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index 63c73fafe26d..0b61a90f1592 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -15,10 +15,10 @@ Required properties: Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs. Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC. Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC. - Use "sifive,fu540-macb" for SiFive FU540-C000 SoC. + Use "sifive,fu540-c000-gem" for SiFive FU540-C000 SoC. Or the generic form: "cdns,emac". - reg: Address and length of the register set for the device - For "sifive,fu540-macb", second range is required to specify the + For "sifive,fu540-c000-gem", second range is required to specify the address and length of the registers for GEMGXL Management block. - interrupts: Should contain macb interrupt - phy-mode: See ethernet.txt file in the same directory. -- cgit v1.2.3 From 6342ea886771d65d718d07049c75b25b27e60cfd Mon Sep 17 00:00:00 2001 From: Yash Shah Date: Tue, 27 Aug 2019 10:36:04 +0530 Subject: macb: Update compatibility string for SiFive FU540-C000 Update the compatibility string for SiFive FU540-C000 as per the new string updated in the binding doc. Reference: https://lore.kernel.org/netdev/CAJ2_jOFEVZQat0Yprg4hem4jRrqkB72FKSeQj4p8P5KA-+rgww@mail.gmail.com/ Signed-off-by: Yash Shah Acked-by: Nicolas Ferre Reviewed-by: Paul Walmsley Tested-by: Paul Walmsley Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 5ca17e62dc3e..35b59b5edf0f 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -4154,7 +4154,7 @@ static const struct of_device_id macb_dt_ids[] = { { .compatible = "cdns,emac", .data = &emac_config }, { .compatible = "cdns,zynqmp-gem", .data = &zynqmp_config}, { .compatible = "cdns,zynq-gem", .data = &zynq_config }, - { .compatible = "sifive,fu540-macb", .data = &fu540_c000_config }, + { .compatible = "sifive,fu540-c000-gem", .data = &fu540_c000_config }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, macb_dt_ids); -- cgit v1.2.3 From 04d37cf46a773910f75fefaa9f9488f42bfe1fe2 Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Tue, 27 Aug 2019 12:29:09 +0200 Subject: net/sched: pfifo_fast: fix wrong dereference when qdisc is reset Now that 'TCQ_F_CPUSTATS' bit can be cleared, depending on the value of 'TCQ_F_NOLOCK' bit in the parent qdisc, we need to be sure that per-cpu counters are present when 'reset()' is called for pfifo_fast qdiscs. Otherwise, the following script: # tc q a dev lo handle 1: root htb default 100 # tc c a dev lo parent 1: classid 1:100 htb \ > rate 95Mbit ceil 100Mbit burst 64k [...] # tc f a dev lo parent 1: protocol arp basic classid 1:100 [...] # tc q a dev lo parent 1:100 handle 100: pfifo_fast [...] # tc q d dev lo root can generate the following splat: Unable to handle kernel paging request at virtual address dfff2c01bd148000 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [dfff2c01bd148000] address between user and kernel address ranges Internal error: Oops: 96000004 [#1] SMP [...] pstate: 80000005 (Nzcv daif -PAN -UAO) pc : pfifo_fast_reset+0x280/0x4d8 lr : pfifo_fast_reset+0x21c/0x4d8 sp : ffff800d09676fa0 x29: ffff800d09676fa0 x28: ffff200012ee22e4 x27: dfff200000000000 x26: 0000000000000000 x25: ffff800ca0799958 x24: ffff1001940f332b x23: 0000000000000007 x22: ffff200012ee1ab8 x21: 0000600de8a40000 x20: 0000000000000000 x19: ffff800ca0799900 x18: 0000000000000000 x17: 0000000000000002 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: ffff1001b922e6e2 x11: 1ffff001b922e6e1 x10: 0000000000000000 x9 : 1ffff001b922e6e1 x8 : dfff200000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 1fffe400025dc45c x4 : 1fffe400025dc357 x3 : 00000c01bd148000 x2 : 0000600de8a40000 x1 : 0000000000000007 x0 : 0000600de8a40004 Call trace: pfifo_fast_reset+0x280/0x4d8 qdisc_reset+0x6c/0x370 htb_reset+0x150/0x3b8 [sch_htb] qdisc_reset+0x6c/0x370 dev_deactivate_queue.constprop.5+0xe0/0x1a8 dev_deactivate_many+0xd8/0x908 dev_deactivate+0xe4/0x190 qdisc_graft+0x88c/0xbd0 tc_get_qdisc+0x418/0x8a8 rtnetlink_rcv_msg+0x3a8/0xa78 netlink_rcv_skb+0x18c/0x328 rtnetlink_rcv+0x28/0x38 netlink_unicast+0x3c4/0x538 netlink_sendmsg+0x538/0x9a0 sock_sendmsg+0xac/0xf8 ___sys_sendmsg+0x53c/0x658 __sys_sendmsg+0xc8/0x140 __arm64_sys_sendmsg+0x74/0xa8 el0_svc_handler+0x164/0x468 el0_svc+0x10/0x14 Code: 910012a0 92400801 d343fc03 11000c21 (38fb6863) Fix this by testing the value of 'TCQ_F_CPUSTATS' bit in 'qdisc->flags', before dereferencing 'qdisc->cpu_qstats'. Changes since v1: - coding style improvements, thanks to Stefano Brivio Fixes: 8a53e616de29 ("net: sched: when clearing NOLOCK, clear TCQ_F_CPUSTATS, too") CC: Paolo Abeni Reported-by: Li Shuang Signed-off-by: Davide Caratti Acked-by: Paolo Abeni Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller --- net/sched/sch_generic.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 11c03cf4aa74..099797e5409d 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -688,11 +688,14 @@ static void pfifo_fast_reset(struct Qdisc *qdisc) kfree_skb(skb); } - for_each_possible_cpu(i) { - struct gnet_stats_queue *q = per_cpu_ptr(qdisc->cpu_qstats, i); + if (qdisc_is_percpu_stats(qdisc)) { + for_each_possible_cpu(i) { + struct gnet_stats_queue *q; - q->backlog = 0; - q->qlen = 0; + q = per_cpu_ptr(qdisc->cpu_qstats, i); + q->backlog = 0; + q->qlen = 0; + } } } -- cgit v1.2.3 From a84d016479896b5526a2cc54784e6ffc41c9d6f6 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 27 Aug 2019 03:33:12 -0700 Subject: mld: fix memory leak in mld_del_delrec() Similar to the fix done for IPv4 in commit e5b1c6c6277d ("igmp: fix memory leak in igmpv3_del_delrec()"), we need to make sure mca_tomb and mca_sources are not blindly overwritten. Using swap() then a call to ip6_mc_clear_src() will take care of the missing free. BUG: memory leak unreferenced object 0xffff888117d9db00 (size 64): comm "syz-executor247", pid 6918, jiffies 4294943989 (age 25.350s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 fe 88 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000005b463030>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<000000005b463030>] slab_post_alloc_hook mm/slab.h:522 [inline] [<000000005b463030>] slab_alloc mm/slab.c:3319 [inline] [<000000005b463030>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548 [<00000000939cbf94>] kmalloc include/linux/slab.h:552 [inline] [<00000000939cbf94>] kzalloc include/linux/slab.h:748 [inline] [<00000000939cbf94>] ip6_mc_add1_src net/ipv6/mcast.c:2236 [inline] [<00000000939cbf94>] ip6_mc_add_src+0x31f/0x420 net/ipv6/mcast.c:2356 [<00000000d8972221>] ip6_mc_source+0x4a8/0x600 net/ipv6/mcast.c:449 [<000000002b203d0d>] do_ipv6_setsockopt.isra.0+0x1b92/0x1dd0 net/ipv6/ipv6_sockglue.c:748 [<000000001f1e2d54>] ipv6_setsockopt+0x89/0xd0 net/ipv6/ipv6_sockglue.c:944 [<00000000c8f7bdf9>] udpv6_setsockopt+0x4e/0x90 net/ipv6/udp.c:1558 [<000000005a9a0c5e>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3139 [<00000000910b37b2>] __sys_setsockopt+0x10f/0x220 net/socket.c:2084 [<00000000e9108023>] __do_sys_setsockopt net/socket.c:2100 [inline] [<00000000e9108023>] __se_sys_setsockopt net/socket.c:2097 [inline] [<00000000e9108023>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2097 [<00000000f4818160>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296 [<000000008d367e8f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1666d49e1d41 ("mld: do not remove mld souce list info when set link down") Fixes: 9c8bb163ae78 ("igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller --- net/ipv6/mcast.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index 7f3f13c37916..eaa4c2cc2fbb 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -787,14 +787,15 @@ static void mld_del_delrec(struct inet6_dev *idev, struct ifmcaddr6 *im) if (pmc) { im->idev = pmc->idev; if (im->mca_sfmode == MCAST_INCLUDE) { - im->mca_tomb = pmc->mca_tomb; - im->mca_sources = pmc->mca_sources; + swap(im->mca_tomb, pmc->mca_tomb); + swap(im->mca_sources, pmc->mca_sources); for (psf = im->mca_sources; psf; psf = psf->sf_next) psf->sf_crcount = idev->mc_qrv; } else { im->mca_crcount = idev->mc_qrv; } in6_dev_put(pmc->idev); + ip6_mc_clear_src(pmc); kfree(pmc); } spin_unlock_bh(&im->mca_lock); -- cgit v1.2.3 From ad06a566e118e57b852cab5933dbbbaebb141de3 Mon Sep 17 00:00:00 2001 From: Greg Rose Date: Tue, 27 Aug 2019 07:58:09 -0700 Subject: openvswitch: Properly set L4 keys on "later" IP fragments When IP fragments are reassembled before being sent to conntrack, the key from the last fragment is used. Unless there are reordering issues, the last fragment received will not contain the L4 ports, so the key for the reassembled datagram won't contain them. This patch updates the key once we have a reassembled datagram. The handle_fragments() function works on L3 headers so we pull the L3/L4 flow key update code from key_extract into a new function 'key_extract_l3l4'. Then we add a another new function ovs_flow_key_update_l3l4() and export it so that it is accessible by handle_fragments() for conntrack packet reassembly. Co-authored-by: Justin Pettit Signed-off-by: Greg Rose Acked-by: Pravin B Shelar Signed-off-by: David S. Miller --- net/openvswitch/conntrack.c | 5 ++ net/openvswitch/flow.c | 155 +++++++++++++++++++++++++------------------- net/openvswitch/flow.h | 1 + 3 files changed, 95 insertions(+), 66 deletions(-) diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c index d8da6477d6be..05249eb45082 100644 --- a/net/openvswitch/conntrack.c +++ b/net/openvswitch/conntrack.c @@ -525,6 +525,11 @@ static int handle_fragments(struct net *net, struct sw_flow_key *key, return -EPFNOSUPPORT; } + /* The key extracted from the fragment that completed this datagram + * likely didn't have an L4 header, so regenerate it. + */ + ovs_flow_key_update_l3l4(skb, key); + key->ip.frag = OVS_FRAG_TYPE_NONE; skb_clear_hash(skb); skb->ignore_df = 1; diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c index bc89e16e0505..005f7622edac 100644 --- a/net/openvswitch/flow.c +++ b/net/openvswitch/flow.c @@ -523,78 +523,15 @@ static int parse_nsh(struct sk_buff *skb, struct sw_flow_key *key) } /** - * key_extract - extracts a flow key from an Ethernet frame. + * key_extract_l3l4 - extracts L3/L4 header information. * @skb: sk_buff that contains the frame, with skb->data pointing to the - * Ethernet header + * L3 header * @key: output flow key * - * The caller must ensure that skb->len >= ETH_HLEN. - * - * Returns 0 if successful, otherwise a negative errno value. - * - * Initializes @skb header fields as follows: - * - * - skb->mac_header: the L2 header. - * - * - skb->network_header: just past the L2 header, or just past the - * VLAN header, to the first byte of the L2 payload. - * - * - skb->transport_header: If key->eth.type is ETH_P_IP or ETH_P_IPV6 - * on output, then just past the IP header, if one is present and - * of a correct length, otherwise the same as skb->network_header. - * For other key->eth.type values it is left untouched. - * - * - skb->protocol: the type of the data starting at skb->network_header. - * Equals to key->eth.type. */ -static int key_extract(struct sk_buff *skb, struct sw_flow_key *key) +static int key_extract_l3l4(struct sk_buff *skb, struct sw_flow_key *key) { int error; - struct ethhdr *eth; - - /* Flags are always used as part of stats */ - key->tp.flags = 0; - - skb_reset_mac_header(skb); - - /* Link layer. */ - clear_vlan(key); - if (ovs_key_mac_proto(key) == MAC_PROTO_NONE) { - if (unlikely(eth_type_vlan(skb->protocol))) - return -EINVAL; - - skb_reset_network_header(skb); - key->eth.type = skb->protocol; - } else { - eth = eth_hdr(skb); - ether_addr_copy(key->eth.src, eth->h_source); - ether_addr_copy(key->eth.dst, eth->h_dest); - - __skb_pull(skb, 2 * ETH_ALEN); - /* We are going to push all headers that we pull, so no need to - * update skb->csum here. - */ - - if (unlikely(parse_vlan(skb, key))) - return -ENOMEM; - - key->eth.type = parse_ethertype(skb); - if (unlikely(key->eth.type == htons(0))) - return -ENOMEM; - - /* Multiple tagged packets need to retain TPID to satisfy - * skb_vlan_pop(), which will later shift the ethertype into - * skb->protocol. - */ - if (key->eth.cvlan.tci & htons(VLAN_CFI_MASK)) - skb->protocol = key->eth.cvlan.tpid; - else - skb->protocol = key->eth.type; - - skb_reset_network_header(skb); - __skb_push(skb, skb->data - skb_mac_header(skb)); - } - skb_reset_mac_len(skb); /* Network layer. */ if (key->eth.type == htons(ETH_P_IP)) { @@ -788,6 +725,92 @@ static int key_extract(struct sk_buff *skb, struct sw_flow_key *key) return 0; } +/** + * key_extract - extracts a flow key from an Ethernet frame. + * @skb: sk_buff that contains the frame, with skb->data pointing to the + * Ethernet header + * @key: output flow key + * + * The caller must ensure that skb->len >= ETH_HLEN. + * + * Returns 0 if successful, otherwise a negative errno value. + * + * Initializes @skb header fields as follows: + * + * - skb->mac_header: the L2 header. + * + * - skb->network_header: just past the L2 header, or just past the + * VLAN header, to the first byte of the L2 payload. + * + * - skb->transport_header: If key->eth.type is ETH_P_IP or ETH_P_IPV6 + * on output, then just past the IP header, if one is present and + * of a correct length, otherwise the same as skb->network_header. + * For other key->eth.type values it is left untouched. + * + * - skb->protocol: the type of the data starting at skb->network_header. + * Equals to key->eth.type. + */ +static int key_extract(struct sk_buff *skb, struct sw_flow_key *key) +{ + struct ethhdr *eth; + + /* Flags are always used as part of stats */ + key->tp.flags = 0; + + skb_reset_mac_header(skb); + + /* Link layer. */ + clear_vlan(key); + if (ovs_key_mac_proto(key) == MAC_PROTO_NONE) { + if (unlikely(eth_type_vlan(skb->protocol))) + return -EINVAL; + + skb_reset_network_header(skb); + key->eth.type = skb->protocol; + } else { + eth = eth_hdr(skb); + ether_addr_copy(key->eth.src, eth->h_source); + ether_addr_copy(key->eth.dst, eth->h_dest); + + __skb_pull(skb, 2 * ETH_ALEN); + /* We are going to push all headers that we pull, so no need to + * update skb->csum here. + */ + + if (unlikely(parse_vlan(skb, key))) + return -ENOMEM; + + key->eth.type = parse_ethertype(skb); + if (unlikely(key->eth.type == htons(0))) + return -ENOMEM; + + /* Multiple tagged packets need to retain TPID to satisfy + * skb_vlan_pop(), which will later shift the ethertype into + * skb->protocol. + */ + if (key->eth.cvlan.tci & htons(VLAN_CFI_MASK)) + skb->protocol = key->eth.cvlan.tpid; + else + skb->protocol = key->eth.type; + + skb_reset_network_header(skb); + __skb_push(skb, skb->data - skb_mac_header(skb)); + } + + skb_reset_mac_len(skb); + + /* Fill out L3/L4 key info, if any */ + return key_extract_l3l4(skb, key); +} + +/* In the case of conntrack fragment handling it expects L3 headers, + * add a helper. + */ +int ovs_flow_key_update_l3l4(struct sk_buff *skb, struct sw_flow_key *key) +{ + return key_extract_l3l4(skb, key); +} + int ovs_flow_key_update(struct sk_buff *skb, struct sw_flow_key *key) { int res; diff --git a/net/openvswitch/flow.h b/net/openvswitch/flow.h index a5506e2d4b7a..b830d5ff7af4 100644 --- a/net/openvswitch/flow.h +++ b/net/openvswitch/flow.h @@ -270,6 +270,7 @@ void ovs_flow_stats_clear(struct sw_flow *); u64 ovs_flow_used_time(unsigned long flow_jiffies); int ovs_flow_key_update(struct sk_buff *skb, struct sw_flow_key *key); +int ovs_flow_key_update_l3l4(struct sk_buff *skb, struct sw_flow_key *key); int ovs_flow_key_extract(const struct ip_tunnel_info *tun_info, struct sk_buff *skb, struct sw_flow_key *key); -- cgit v1.2.3 From 0754b4e8cdf3eec6e4122e79af26ed9bab20f8f8 Mon Sep 17 00:00:00 2001 From: Justin Pettit Date: Tue, 27 Aug 2019 07:58:10 -0700 Subject: openvswitch: Clear the L4 portion of the key for "later" fragments. Only the first fragment in a datagram contains the L4 headers. When the Open vSwitch module parses a packet, it always sets the IP protocol field in the key, but can only set the L4 fields on the first fragment. The original behavior would not clear the L4 portion of the key, so garbage values would be sent in the key for "later" fragments. This patch clears the L4 fields in that circumstance to prevent sending those garbage values as part of the upcall. Signed-off-by: Justin Pettit Acked-by: Pravin B Shelar Signed-off-by: David S. Miller --- net/openvswitch/flow.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c index 005f7622edac..9d81d2c7bf82 100644 --- a/net/openvswitch/flow.c +++ b/net/openvswitch/flow.c @@ -560,6 +560,7 @@ static int key_extract_l3l4(struct sk_buff *skb, struct sw_flow_key *key) offset = nh->frag_off & htons(IP_OFFSET); if (offset) { key->ip.frag = OVS_FRAG_TYPE_LATER; + memset(&key->tp, 0, sizeof(key->tp)); return 0; } if (nh->frag_off & htons(IP_MF) || @@ -677,8 +678,10 @@ static int key_extract_l3l4(struct sk_buff *skb, struct sw_flow_key *key) return error; } - if (key->ip.frag == OVS_FRAG_TYPE_LATER) + if (key->ip.frag == OVS_FRAG_TYPE_LATER) { + memset(&key->tp, 0, sizeof(key->tp)); return 0; + } if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP) key->ip.frag = OVS_FRAG_TYPE_FIRST; -- cgit v1.2.3 From a256f2e329df0773022d28df2c3d206b9aaf1e61 Mon Sep 17 00:00:00 2001 From: Anup Patel Date: Mon, 19 Aug 2019 05:14:23 +0000 Subject: RISC-V: Fix FIXMAP area corruption on RV32 systems Currently, various virtual memory areas of Linux RISC-V are organized in increasing order of their virtual addresses is as follows: 1. User space area (This is lowest area and starts at 0x0) 2. FIXMAP area 3. VMALLOC area 4. Kernel area (This is highest area and starts at PAGE_OFFSET) The maximum size of user space aread is represented by TASK_SIZE. On RV32 systems, TASK_SIZE is defined as VMALLOC_START which causes the user space area to overlap the FIXMAP area. This allows user space apps to potentially corrupt the FIXMAP area and kernel OF APIs will crash whenever they access corrupted FDT in the FIXMAP area. On RV64 systems, TASK_SIZE is set to fixed 256GB and no other areas happen to overlap so we don't see any FIXMAP area corruptions. This patch fixes FIXMAP area corruption on RV32 systems by setting TASK_SIZE to FIXADDR_START. We also move FIXADDR_TOP, FIXADDR_SIZE, and FIXADDR_START defines to asm/pgtable.h so that we can avoid cyclic header includes. Signed-off-by: Anup Patel Tested-by: Alistair Francis Reviewed-by: Christoph Hellwig Signed-off-by: Paul Walmsley --- arch/riscv/include/asm/fixmap.h | 4 ---- arch/riscv/include/asm/pgtable.h | 12 ++++++++++-- 2 files changed, 10 insertions(+), 6 deletions(-) diff --git a/arch/riscv/include/asm/fixmap.h b/arch/riscv/include/asm/fixmap.h index 9c66033c3a54..161f28d04a07 100644 --- a/arch/riscv/include/asm/fixmap.h +++ b/arch/riscv/include/asm/fixmap.h @@ -30,10 +30,6 @@ enum fixed_addresses { __end_of_fixed_addresses }; -#define FIXADDR_SIZE (__end_of_fixed_addresses * PAGE_SIZE) -#define FIXADDR_TOP (VMALLOC_START) -#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) - #define FIXMAP_PAGE_IO PAGE_KERNEL #define __early_set_fixmap __set_fixmap diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h index a364aba23d55..c24a083b3e12 100644 --- a/arch/riscv/include/asm/pgtable.h +++ b/arch/riscv/include/asm/pgtable.h @@ -420,14 +420,22 @@ static inline void pgtable_cache_init(void) #define VMALLOC_END (PAGE_OFFSET - 1) #define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) +#define FIXADDR_TOP VMALLOC_START +#ifdef CONFIG_64BIT +#define FIXADDR_SIZE PMD_SIZE +#else +#define FIXADDR_SIZE PGDIR_SIZE +#endif +#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) + /* - * Task size is 0x4000000000 for RV64 or 0xb800000 for RV32. + * Task size is 0x4000000000 for RV64 or 0x9fc00000 for RV32. * Note that PGDIR_SIZE must evenly divide TASK_SIZE. */ #ifdef CONFIG_64BIT #define TASK_SIZE (PGDIR_SIZE * PTRS_PER_PGD / 2) #else -#define TASK_SIZE VMALLOC_START +#define TASK_SIZE FIXADDR_START #endif #include -- cgit v1.2.3 From 5b3efa4f1479c91cb8361acef55f9c6662feba57 Mon Sep 17 00:00:00 2001 From: zhaoyang Date: Mon, 26 Aug 2019 04:07:37 +0100 Subject: ARM: 8901/1: add a criteria for pfn_valid of arm pfn_valid can be wrong when parsing a invalid pfn whose phys address exceeds BITS_PER_LONG as the MSB will be trimed when shifted. The issue originally arise from bellowing call stack, which corresponding to an access of the /proc/kpageflags from userspace with a invalid pfn parameter and leads to kernel panic. [46886.723249] c7 [] (stable_page_flags) from [] [46886.723264] c7 [] (kpageflags_read) from [] [46886.723280] c7 [] (proc_reg_read) from [] [46886.723290] c7 [] (__vfs_read) from [] [46886.723301] c7 [] (vfs_read) from [] [46886.723315] c7 [] (SyS_pread64) from [] (ret_fast_syscall+0x0/0x28) Signed-off-by: Zhaoyang Huang Signed-off-by: Russell King --- arch/arm/mm/init.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 3a65ded832df..b4be3baa83d4 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -175,6 +175,11 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max_low, #ifdef CONFIG_HAVE_ARCH_PFN_VALID int pfn_valid(unsigned long pfn) { + phys_addr_t addr = __pfn_to_phys(pfn); + + if (__phys_to_pfn(addr) != pfn) + return 0; + return memblock_is_map_memory(__pfn_to_phys(pfn)); } EXPORT_SYMBOL(pfn_valid); -- cgit v1.2.3 From 36f1031c51a2538e5558fb44c6d6b88f98d3c0f2 Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Tue, 27 Aug 2019 11:10:04 -0500 Subject: ibmvnic: Do not process reset during or after device removal Currently, the ibmvnic driver will not schedule device resets if the device is being removed, but does not check the device state before the reset is actually processed. This leads to a race where a reset is scheduled with a valid device state but is processed after the driver has been removed, resulting in an oops. Fix this by checking the device state before processing a queued reset event. Reported-by: Abdul Haleem Tested-by: Abdul Haleem Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index cebd20f3128d..fa4bb940665c 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1983,6 +1983,10 @@ static void __ibmvnic_reset(struct work_struct *work) rwi = get_next_rwi(adapter); while (rwi) { + if (adapter->state == VNIC_REMOVING || + adapter->state == VNIC_REMOVED) + goto out; + if (adapter->force_reset_recovery) { adapter->force_reset_recovery = false; rc = do_hard_reset(adapter, rwi, reset_state); @@ -2007,7 +2011,7 @@ static void __ibmvnic_reset(struct work_struct *work) netdev_dbg(adapter->netdev, "Reset failed\n"); free_all_rwi(adapter); } - +out: adapter->resetting = false; if (we_lock_rtnl) rtnl_unlock(); -- cgit v1.2.3 From dbf47a2a094edf58983265e323ca4bdcdb58b5ee Mon Sep 17 00:00:00 2001 From: Vlad Buslov Date: Tue, 27 Aug 2019 21:49:38 +0300 Subject: net: sched: act_sample: fix psample group handling on overwrite Action sample doesn't properly handle psample_group pointer in overwrite case. Following issues need to be fixed: - In tcf_sample_init() function RCU_INIT_POINTER() is used to set s->psample_group, even though we neither setting the pointer to NULL, nor preventing concurrent readers from accessing the pointer in some way. Use rcu_swap_protected() instead to safely reset the pointer. - Old value of s->psample_group is not released or deallocated in any way, which results resource leak. Use psample_group_put() on non-NULL value obtained with rcu_swap_protected(). - The function psample_group_put() that released reference to struct psample_group pointed by rcu-pointer s->psample_group doesn't respect rcu grace period when deallocating it. Extend struct psample_group with rcu head and use kfree_rcu when freeing it. Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action") Signed-off-by: Vlad Buslov Signed-off-by: David S. Miller --- include/net/psample.h | 1 + net/psample/psample.c | 2 +- net/sched/act_sample.c | 6 +++++- 3 files changed, 7 insertions(+), 2 deletions(-) diff --git a/include/net/psample.h b/include/net/psample.h index 37a4df2325b2..6b578ce69cd8 100644 --- a/include/net/psample.h +++ b/include/net/psample.h @@ -11,6 +11,7 @@ struct psample_group { u32 group_num; u32 refcount; u32 seq; + struct rcu_head rcu; }; struct psample_group *psample_group_get(struct net *net, u32 group_num); diff --git a/net/psample/psample.c b/net/psample/psample.c index 841f198ea1a8..66e4b61a350d 100644 --- a/net/psample/psample.c +++ b/net/psample/psample.c @@ -154,7 +154,7 @@ static void psample_group_destroy(struct psample_group *group) { psample_group_notify(group, PSAMPLE_CMD_DEL_GROUP); list_del(&group->list); - kfree(group); + kfree_rcu(group, rcu); } static struct psample_group * diff --git a/net/sched/act_sample.c b/net/sched/act_sample.c index 7eff363f9f03..10229124a992 100644 --- a/net/sched/act_sample.c +++ b/net/sched/act_sample.c @@ -102,13 +102,17 @@ static int tcf_sample_init(struct net *net, struct nlattr *nla, goto_ch = tcf_action_set_ctrlact(*a, parm->action, goto_ch); s->rate = rate; s->psample_group_num = psample_group_num; - RCU_INIT_POINTER(s->psample_group, psample_group); + rcu_swap_protected(s->psample_group, psample_group, + lockdep_is_held(&s->tcf_lock)); if (tb[TCA_SAMPLE_TRUNC_SIZE]) { s->truncate = true; s->trunc_size = nla_get_u32(tb[TCA_SAMPLE_TRUNC_SIZE]); } spin_unlock_bh(&s->tcf_lock); + + if (psample_group) + psample_group_put(psample_group); if (goto_ch) tcf_chain_put_by_act(goto_ch); -- cgit v1.2.3 From 888a5c53c0d8be6e98bc85b677f179f77a647873 Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Tue, 27 Aug 2019 15:09:33 -0400 Subject: tcp: inherit timestamp on mtu probe TCP associates tx timestamp requests with a byte in the bytestream. If merging skbs in tcp_mtu_probe, migrate the tstamp request. Similar to MSG_EOR, do not allow moving a timestamp from any segment in the probe but the last. This to avoid merging multiple timestamps. Tested with the packetdrill script at https://github.com/wdebruij/packetdrill/commits/mtu_probe-1 Link: http://patchwork.ozlabs.org/patch/1143278/#2232897 Fixes: 4ed2d765dfac ("net-timestamp: TCP timestamping") Signed-off-by: Willem de Bruijn Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 979520e46e33..8a645f304e6c 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -2053,7 +2053,7 @@ static bool tcp_can_coalesce_send_queue_head(struct sock *sk, int len) if (len <= skb->len) break; - if (unlikely(TCP_SKB_CB(skb)->eor)) + if (unlikely(TCP_SKB_CB(skb)->eor) || tcp_has_tx_tstamp(skb)) return false; len -= skb->len; @@ -2170,6 +2170,7 @@ static int tcp_mtu_probe(struct sock *sk) * we need to propagate it to the new skb. */ TCP_SKB_CB(nskb)->eor = TCP_SKB_CB(skb)->eor; + tcp_skb_collapse_tstamp(nskb, skb); tcp_unlink_write_queue(skb, sk); sk_wmem_free_skb(sk, skb); } else { -- cgit v1.2.3 From 092e22e586236bba106a82113826a68080a03506 Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Tue, 27 Aug 2019 23:18:53 +0200 Subject: net/sched: pfifo_fast: fix wrong dereference in pfifo_fast_enqueue Now that 'TCQ_F_CPUSTATS' bit can be cleared, depending on the value of 'TCQ_F_NOLOCK' bit in the parent qdisc, we can't assume anymore that per-cpu counters are there in the error path of skb_array_produce(). Otherwise, the following splat can be seen: Unable to handle kernel paging request at virtual address 0000600dea430008 Mem abort info: ESR = 0x96000005 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000005 CM = 0, WnR = 0 user pgtable: 64k pages, 48-bit VAs, pgdp = 000000007b97530e [0000600dea430008] pgd=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000005 [#1] SMP [...] pstate: 10000005 (nzcV daif -PAN -UAO) pc : pfifo_fast_enqueue+0x524/0x6e8 lr : pfifo_fast_enqueue+0x46c/0x6e8 sp : ffff800d39376fe0 x29: ffff800d39376fe0 x28: 1ffff001a07d1e40 x27: ffff800d03e8f188 x26: ffff800d03e8f200 x25: 0000000000000062 x24: ffff800d393772f0 x23: 0000000000000000 x22: 0000000000000403 x21: ffff800cca569a00 x20: ffff800d03e8ee00 x19: ffff800cca569a10 x18: 00000000000000bf x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: ffff1001a726edd0 x13: 1fffe4000276a9a4 x12: 0000000000000000 x11: dfff200000000000 x10: ffff800d03e8f1a0 x9 : 0000000000000003 x8 : 0000000000000000 x7 : 00000000f1f1f1f1 x6 : ffff1001a726edea x5 : ffff800cca56a53c x4 : 1ffff001bf9a8003 x3 : 1ffff001bf9a8003 x2 : 1ffff001a07d1dcb x1 : 0000600dea430000 x0 : 0000600dea430008 Process ping (pid: 6067, stack limit = 0x00000000dc0aa557) Call trace: pfifo_fast_enqueue+0x524/0x6e8 htb_enqueue+0x660/0x10e0 [sch_htb] __dev_queue_xmit+0x123c/0x2de0 dev_queue_xmit+0x24/0x30 ip_finish_output2+0xc48/0x1720 ip_finish_output+0x548/0x9d8 ip_output+0x334/0x788 ip_local_out+0x90/0x138 ip_send_skb+0x44/0x1d0 ip_push_pending_frames+0x5c/0x78 raw_sendmsg+0xed8/0x28d0 inet_sendmsg+0xc4/0x5c0 sock_sendmsg+0xac/0x108 __sys_sendto+0x1ac/0x2a0 __arm64_sys_sendto+0xc4/0x138 el0_svc_handler+0x13c/0x298 el0_svc+0x8/0xc Code: f9402e80 d538d081 91002000 8b010000 (885f7c03) Fix this by testing the value of 'TCQ_F_CPUSTATS' bit in 'qdisc->flags', before dereferencing 'qdisc->cpu_qstats'. Fixes: 8a53e616de29 ("net: sched: when clearing NOLOCK, clear TCQ_F_CPUSTATS, too") CC: Paolo Abeni CC: Stefano Brivio Reported-by: Li Shuang Signed-off-by: Davide Caratti Acked-by: Paolo Abeni Signed-off-by: David S. Miller --- net/sched/sch_generic.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 099797e5409d..137db1cbde85 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -624,8 +624,12 @@ static int pfifo_fast_enqueue(struct sk_buff *skb, struct Qdisc *qdisc, err = skb_array_produce(q, skb); - if (unlikely(err)) - return qdisc_drop_cpu(skb, qdisc, to_free); + if (unlikely(err)) { + if (qdisc_is_percpu_stats(qdisc)) + return qdisc_drop_cpu(skb, qdisc, to_free); + else + return qdisc_drop(skb, qdisc, to_free); + } qdisc_update_stats_at_enqueue(qdisc, pkt_len); return NET_XMIT_SUCCESS; -- cgit v1.2.3 From 49d4b14113cae1410eb4654ada5b9583bad971c4 Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Wed, 28 Aug 2019 09:51:41 +0800 Subject: Revert "r8152: napi hangup fix after disconnect" This reverts commit 0ee1f4734967af8321ecebaf9c74221ace34f2d5. The commit 0ee1f4734967 ("r8152: napi hangup fix after disconnect") adds a check about RTL8152_UNPLUG to determine if calling napi_disable() is invalid in rtl8152_close(), when rtl8152_disconnect() is called. This avoids to use napi_disable() after calling netif_napi_del(). Howver, commit ffa9fec30ca0 ("r8152: set RTL8152_UNPLUG only for real disconnection") causes that RTL8152_UNPLUG is not always set when calling rtl8152_disconnect(). Therefore, I have to revert commit 0ee1f4734967 ("r8152: napi hangup fix after disconnect"), first. And submit another patch to fix it. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index eee0f5007ee3..ad3abe26b51b 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -4021,8 +4021,7 @@ static int rtl8152_close(struct net_device *netdev) #ifdef CONFIG_PM_SLEEP unregister_pm_notifier(&tp->pm_notifier); #endif - if (!test_bit(RTL8152_UNPLUG, &tp->flags)) - napi_disable(&tp->napi); + napi_disable(&tp->napi); clear_bit(WORK_ENABLE, &tp->flags); usb_kill_urb(tp->intr_urb); cancel_delayed_work_sync(&tp->schedule); -- cgit v1.2.3 From 973dc6cfc0e2c43ff29ca5645ceaf1ae694ea110 Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Wed, 28 Aug 2019 09:51:42 +0800 Subject: r8152: remove calling netif_napi_del Remove unnecessary use of netif_napi_del. This also avoids to call napi_disable() after netif_napi_del(). Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index ad3abe26b51b..04137ac373b0 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -5352,7 +5352,6 @@ static int rtl8152_probe(struct usb_interface *intf, return 0; out1: - netif_napi_del(&tp->napi); usb_set_intfdata(intf, NULL); out: free_netdev(netdev); @@ -5367,7 +5366,6 @@ static void rtl8152_disconnect(struct usb_interface *intf) if (tp) { rtl_set_unplug(tp); - netif_napi_del(&tp->napi); unregister_netdev(tp->netdev); cancel_delayed_work_sync(&tp->hw_phy_work); tp->rtl_ops.unload(tp); -- cgit v1.2.3 From 739d7c5752b255e89ddbb1b0474f3b88ef5cd343 Mon Sep 17 00:00:00 2001 From: John Hurley Date: Tue, 27 Aug 2019 22:56:29 -0700 Subject: nfp: flower: prevent ingress block binds on internal ports Internal port TC offload is implemented through user-space applications (such as OvS) by adding filters at egress via TC clsact qdiscs. Indirect block offload support in the NFP driver accepts both ingress qdisc binds and egress binds if the device is an internal port. However, clsact sends bind notification for both ingress and egress block binds which can lead to the driver registering multiple callbacks and receiving multiple notifications of new filters. Fix this by rejecting ingress block bind callbacks when the port is internal and only adding filter callbacks for egress binds. Fixes: 4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports") Signed-off-by: John Hurley Reviewed-by: Jakub Kicinski Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/flower/offload.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/netronome/nfp/flower/offload.c b/drivers/net/ethernet/netronome/nfp/flower/offload.c index 9917d64694c6..457bdc60f3ee 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/offload.c +++ b/drivers/net/ethernet/netronome/nfp/flower/offload.c @@ -1409,9 +1409,10 @@ nfp_flower_setup_indr_tc_block(struct net_device *netdev, struct nfp_app *app, struct nfp_flower_priv *priv = app->priv; struct flow_block_cb *block_cb; - if (f->binder_type != FLOW_BLOCK_BINDER_TYPE_CLSACT_INGRESS && - !(f->binder_type == FLOW_BLOCK_BINDER_TYPE_CLSACT_EGRESS && - nfp_flower_internal_port_can_offload(app, netdev))) + if ((f->binder_type != FLOW_BLOCK_BINDER_TYPE_CLSACT_INGRESS && + !nfp_flower_internal_port_can_offload(app, netdev)) || + (f->binder_type != FLOW_BLOCK_BINDER_TYPE_CLSACT_EGRESS && + nfp_flower_internal_port_can_offload(app, netdev))) return -EOPNOTSUPP; switch (f->command) { -- cgit v1.2.3 From e8024cb483abb2b0290b3ef5e34c736e9de2492f Mon Sep 17 00:00:00 2001 From: John Hurley Date: Tue, 27 Aug 2019 22:56:30 -0700 Subject: nfp: flower: handle neighbour events on internal ports Recent code changes to NFP allowed the offload of neighbour entries to FW when the next hop device was an internal port. This allows for offload of tunnel encap when the end-point IP address is applied to such a port. Unfortunately, the neighbour event handler still rejects events that are not associated with a repr dev and so the firmware neighbour table may get out of sync for internal ports. Fix this by allowing internal port neighbour events to be correctly processed. Fixes: 45756dfedab5 ("nfp: flower: allow tunnels to output to internal port") Signed-off-by: John Hurley Reviewed-by: Simon Horman Reviewed-by: Jakub Kicinski Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c index a7a80f4b722a..f0ee982eb1b5 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c +++ b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c @@ -328,13 +328,13 @@ nfp_tun_neigh_event_handler(struct notifier_block *nb, unsigned long event, flow.daddr = *(__be32 *)n->primary_key; - /* Only concerned with route changes for representors. */ - if (!nfp_netdev_is_nfp_repr(n->dev)) - return NOTIFY_DONE; - app_priv = container_of(nb, struct nfp_flower_priv, tun.neigh_nb); app = app_priv->app; + if (!nfp_netdev_is_nfp_repr(n->dev) && + !nfp_flower_internal_port_can_offload(app, n->dev)) + return NOTIFY_DONE; + /* Only concerned with changes to routes already added to NFP. */ if (!nfp_tun_has_route(app, flow.daddr)) return NOTIFY_DONE; -- cgit v1.2.3 From 189308d5823a089b56e2299cd96589507dac7319 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 28 Aug 2019 08:31:19 +0200 Subject: sky2: Disable MSI on yet another ASUS boards (P6Xxxx) A similar workaround for the suspend/resume problem is needed for yet another ASUS machines, P6X models. Like the previous fix, the BIOS doesn't provide the standard DMI_SYS_* entry, so again DMI_BOARD_* entries are used instead. Reported-and-tested-by: SteveM Signed-off-by: Takashi Iwai Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index a01c75ede871..e0363870f3a5 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -4931,6 +4931,13 @@ static const struct dmi_system_id msi_blacklist[] = { DMI_MATCH(DMI_BOARD_NAME, "P6T"), }, }, + { + .ident = "ASUS P6X", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P6X"), + }, + }, {} }; -- cgit v1.2.3 From dc9cfd2692225a2164f4f20b7deaf38ca8645de3 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 13 Aug 2019 16:03:13 -0700 Subject: mtd: hyperbus: fix dependency and build error lib/devres.c, which implements devm_ioremap_resource(), is only built when CONFIG_HAS_IOMEM is set/enabled, so MTD_HYPERBUS should depend on HAS_IOMEM. Fixes a build error and a Kconfig warning (as seen on UML builds): WARNING: unmet direct dependencies detected for MTD_COMPLEX_MAPPINGS Depends on [n]: MTD [=m] && HAS_IOMEM [=n] Selected by [m]: - MTD_HYPERBUS [=m] && MTD [=m] ERROR: "devm_ioremap_resource" [drivers/mtd/hyperbus/hyperbus-core.ko] undefined! Fixes: dcc7d3446a0f ("mtd: Add support for HyperBus memory devices") Signed-off-by: Randy Dunlap Cc: Vignesh Raghavendra Cc: Miquel Raynal Cc: Geert Uytterhoeven Cc: linux-mtd@lists.infradead.org Acked-by: Vignesh Raghavendra Signed-off-by: Miquel Raynal --- drivers/mtd/hyperbus/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/hyperbus/Kconfig b/drivers/mtd/hyperbus/Kconfig index b4e3caf7d799..a4d8968d133d 100644 --- a/drivers/mtd/hyperbus/Kconfig +++ b/drivers/mtd/hyperbus/Kconfig @@ -1,5 +1,6 @@ menuconfig MTD_HYPERBUS tristate "HyperBus support" + depends on HAS_IOMEM select MTD_CFI select MTD_MAP_BANK_WIDTH_2 select MTD_CFI_AMDSTD -- cgit v1.2.3 From de20900fbe1c4fd36de25a7a5a43223254ecf0d0 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 27 Aug 2019 21:23:45 +0200 Subject: netfilter: nf_flow_table: clear skb tstamp before xmit If 'fq' qdisc is used and a program has requested timestamps, skb->tstamp needs to be cleared, else fq will treat these as 'transmit time'. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_flow_table_ip.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_flow_table_ip.c b/net/netfilter/nf_flow_table_ip.c index d68c801dd614..b9e7dd6e60ce 100644 --- a/net/netfilter/nf_flow_table_ip.c +++ b/net/netfilter/nf_flow_table_ip.c @@ -228,7 +228,6 @@ static unsigned int nf_flow_xmit_xfrm(struct sk_buff *skb, { skb_orphan(skb); skb_dst_set_noref(skb, dst); - skb->tstamp = 0; dst_output(state->net, state->sk, skb); return NF_STOLEN; } @@ -284,6 +283,7 @@ nf_flow_offload_ip_hook(void *priv, struct sk_buff *skb, flow->timeout = (u32)jiffies + NF_FLOW_TIMEOUT; iph = ip_hdr(skb); ip_decrease_ttl(iph); + skb->tstamp = 0; if (unlikely(dst_xfrm(&rt->dst))) { memset(skb->cb, 0, sizeof(struct inet_skb_parm)); @@ -512,6 +512,7 @@ nf_flow_offload_ipv6_hook(void *priv, struct sk_buff *skb, flow->timeout = (u32)jiffies + NF_FLOW_TIMEOUT; ip6h = ipv6_hdr(skb); ip6h->hop_limit--; + skb->tstamp = 0; if (unlikely(dst_xfrm(&rt->dst))) { memset(skb->cb, 0, sizeof(struct inet6_skb_parm)); -- cgit v1.2.3 From b9500577d361522a3d9f14da8cf41dc1d824904e Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Wed, 21 Aug 2019 20:17:32 +0300 Subject: iwlwifi: pcie: handle switching killer Qu B0 NICs to C0 We need to use a different firmware for C0 versions of killer Qu NICs. Add structures for them and handle them in the if block that detects C0 revisions. Additionally, instead of having an inclusive check for QnJ devices, make the selection exclusive, so that switching to QnJ is the exception, not the default. This prevents us from having to add all the non-QnJ cards to an exclusion list. To do so, only go into the QnJ block if the device has an RF ID type HR and HW revision QnJ. Cc: stable@vger.kernel.org # 5.2 Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/20190821171732.2266-1-luca@coelho.fi Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/cfg/22000.c | 24 ++++++++++++++++++++++++ drivers/net/wireless/intel/iwlwifi/iwl-config.h | 2 ++ drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 4 ++++ drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 7 +------ 4 files changed, 31 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/cfg/22000.c b/drivers/net/wireless/intel/iwlwifi/cfg/22000.c index 1f500cddb3a7..55b713255b8e 100644 --- a/drivers/net/wireless/intel/iwlwifi/cfg/22000.c +++ b/drivers/net/wireless/intel/iwlwifi/cfg/22000.c @@ -556,6 +556,30 @@ const struct iwl_cfg killer1650i_2ax_cfg_qu_b0_hr_b0 = { .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, }; +const struct iwl_cfg killer1650s_2ax_cfg_qu_c0_hr_b0 = { + .name = "Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201NGW)", + .fw_name_pre = IWL_QU_C_HR_B_FW_PRE, + IWL_DEVICE_22500, + /* + * This device doesn't support receiving BlockAck with a large bitmap + * so we need to restrict the size of transmitted aggregation to the + * HT size; mac80211 would otherwise pick the HE max (256) by default. + */ + .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, +}; + +const struct iwl_cfg killer1650i_2ax_cfg_qu_c0_hr_b0 = { + .name = "Killer(R) Wi-Fi 6 AX1650s 160MHz Wireless Network Adapter (201D2W)", + .fw_name_pre = IWL_QU_C_HR_B_FW_PRE, + IWL_DEVICE_22500, + /* + * This device doesn't support receiving BlockAck with a large bitmap + * so we need to restrict the size of transmitted aggregation to the + * HT size; mac80211 would otherwise pick the HE max (256) by default. + */ + .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, +}; + const struct iwl_cfg iwl22000_2ax_cfg_jf = { .name = "Intel(R) Dual Band Wireless AX 22000", .fw_name_pre = IWL_QU_B_JF_B_FW_PRE, diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-config.h b/drivers/net/wireless/intel/iwlwifi/iwl-config.h index 1c1bf1b281cd..6c04f8223aff 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-config.h @@ -577,6 +577,8 @@ extern const struct iwl_cfg iwl_ax1650i_cfg_quz_hr; extern const struct iwl_cfg iwl_ax1650s_cfg_quz_hr; extern const struct iwl_cfg killer1650s_2ax_cfg_qu_b0_hr_b0; extern const struct iwl_cfg killer1650i_2ax_cfg_qu_b0_hr_b0; +extern const struct iwl_cfg killer1650s_2ax_cfg_qu_c0_hr_b0; +extern const struct iwl_cfg killer1650i_2ax_cfg_qu_c0_hr_b0; extern const struct iwl_cfg killer1650x_2ax_cfg; extern const struct iwl_cfg killer1650w_2ax_cfg; extern const struct iwl_cfg iwl9461_2ac_cfg_qu_b0_jf_b0; diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index 7c5aaeaf7fe5..d9ed53b7c768 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -1062,6 +1062,10 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) iwl_trans->cfg = &iwl9560_2ac_cfg_qu_c0_jf_b0; else if (iwl_trans->cfg == &iwl9560_2ac_160_cfg_qu_b0_jf_b0) iwl_trans->cfg = &iwl9560_2ac_160_cfg_qu_c0_jf_b0; + else if (iwl_trans->cfg == &killer1650s_2ax_cfg_qu_b0_hr_b0) + iwl_trans->cfg = &killer1650s_2ax_cfg_qu_c0_hr_b0; + else if (iwl_trans->cfg == &killer1650i_2ax_cfg_qu_b0_hr_b0) + iwl_trans->cfg = &killer1650i_2ax_cfg_qu_c0_hr_b0; } /* same thing for QuZ... */ diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index 935e35dafce5..db62c8314603 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -3602,12 +3602,7 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, } } else if (CSR_HW_RF_ID_TYPE_CHIP_ID(trans->hw_rf_id) == CSR_HW_RF_ID_TYPE_CHIP_ID(CSR_HW_RF_ID_TYPE_HR) && - ((trans->cfg != &iwl_ax200_cfg_cc && - trans->cfg != &iwl_ax201_cfg_qu_hr && - trans->cfg != &killer1650x_2ax_cfg && - trans->cfg != &killer1650w_2ax_cfg && - trans->cfg != &iwl_ax201_cfg_quz_hr) || - trans->hw_rev == CSR_HW_REV_TYPE_QNJ_B0)) { + trans->hw_rev == CSR_HW_REV_TYPE_QNJ_B0) { u32 hw_status; hw_status = iwl_read_prph(trans, UMAG_GEN_HW_STATUS); -- cgit v1.2.3 From c8a41c6afa27b8c3f61622dfd882b912da9d6721 Mon Sep 17 00:00:00 2001 From: Denis Kenzior Date: Tue, 27 Aug 2019 17:41:19 -0500 Subject: mac80211: Don't memset RXCB prior to PAE intercept In ieee80211_deliver_skb_to_local_stack intercepts EAPoL frames if mac80211 is configured to do so and forwards the contents over nl80211. During this process some additional data is also forwarded, including whether the frame was received encrypted or not. Unfortunately just prior to the call to ieee80211_deliver_skb_to_local_stack, skb->cb is cleared, resulting in incorrect data being exposed over nl80211. Fixes: 018f6fbf540d ("mac80211: Send control port frames over nl80211") Cc: stable@vger.kernel.org Signed-off-by: Denis Kenzior Link: https://lore.kernel.org/r/20190827224120.14545-2-denkenz@gmail.com Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 3c1ab870fefe..7c4aeac006fb 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2452,6 +2452,8 @@ static void ieee80211_deliver_skb_to_local_stack(struct sk_buff *skb, cfg80211_rx_control_port(dev, skb, noencrypt); dev_kfree_skb(skb); } else { + memset(skb->cb, 0, sizeof(skb->cb)); + /* deliver to local stack */ if (rx->napi) napi_gro_receive(rx->napi, skb); @@ -2546,8 +2548,6 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx) if (skb) { skb->protocol = eth_type_trans(skb, dev); - memset(skb->cb, 0, sizeof(skb->cb)); - ieee80211_deliver_skb_to_local_stack(skb, rx); } -- cgit v1.2.3 From f8b43c5cf4b62a19f2210a0f5367b84e1eff1ab9 Mon Sep 17 00:00:00 2001 From: Denis Kenzior Date: Tue, 27 Aug 2019 17:41:20 -0500 Subject: mac80211: Correctly set noencrypt for PAE frames The noencrypt flag was intended to be set if the "frame was received unencrypted" according to include/uapi/linux/nl80211.h. However, the current behavior is opposite of this. Cc: stable@vger.kernel.org Fixes: 018f6fbf540d ("mac80211: Send control port frames over nl80211") Signed-off-by: Denis Kenzior Link: https://lore.kernel.org/r/20190827224120.14545-3-denkenz@gmail.com Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 7c4aeac006fb..768d14c9a716 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2447,7 +2447,7 @@ static void ieee80211_deliver_skb_to_local_stack(struct sk_buff *skb, skb->protocol == cpu_to_be16(ETH_P_PREAUTH)) && sdata->control_port_over_nl80211)) { struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); - bool noencrypt = status->flag & RX_FLAG_DECRYPTED; + bool noencrypt = !(status->flag & RX_FLAG_DECRYPTED); cfg80211_rx_control_port(dev, skb, noencrypt); dev_kfree_skb(skb); -- cgit v1.2.3 From 7a6c9dbb36a415c5901313fc89871fd19f533656 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 23 Aug 2019 11:03:52 +0200 Subject: soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST The move of the IXP4xx SoC drivers exposed their config options on all platforms. Fix this by wrapping them inside an ARCH_IXP4XX or COMPILE_TEST block. Link: https://lore.kernel.org/r/20190823090352.12243-1-linus.walleij@linaro.org Fixes: fcf2d8978cd538a5 ("ARM: ixp4xx: Move NPE and QMGR to drivers/soc") Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann --- drivers/soc/ixp4xx/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/soc/ixp4xx/Kconfig b/drivers/soc/ixp4xx/Kconfig index de2e62c3310a..e3eb19b85fa4 100644 --- a/drivers/soc/ixp4xx/Kconfig +++ b/drivers/soc/ixp4xx/Kconfig @@ -1,4 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only +if ARCH_IXP4XX || COMPILE_TEST + menu "IXP4xx SoC drivers" config IXP4XX_QMGR @@ -15,3 +17,5 @@ config IXP4XX_NPE and is automatically selected by Ethernet and HSS drivers. endmenu + +endif -- cgit v1.2.3 From 00a0c8451abcea98a7ea4abf583a308a6513d8ba Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 20 Aug 2019 20:26:44 -0500 Subject: ARC: unwind: Mark expected switch fall-through MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: haps_hs_defconfig arc): arch/arc/kernel/unwind.c: In function ‘read_pointer’: ./include/linux/compiler.h:328:5: warning: this statement may fall through [-Wimplicit-fallthrough=] do { \ ^ ./include/linux/compiler.h:338:2: note: in expansion of macro ‘__compiletime_assert’ __compiletime_assert(condition, msg, prefix, suffix) ^~~~~~~~~~~~~~~~~~~~ ./include/linux/compiler.h:350:2: note: in expansion of macro ‘_compiletime_assert’ _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__) ^~~~~~~~~~~~~~~~~~~ ./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’ #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg) ^~~~~~~~~~~~~~~~~~ ./include/linux/build_bug.h:50:2: note: in expansion of macro ‘BUILD_BUG_ON_MSG’ BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition) ^~~~~~~~~~~~~~~~ arch/arc/kernel/unwind.c:573:3: note: in expansion of macro ‘BUILD_BUG_ON’ BUILD_BUG_ON(sizeof(u32) != sizeof(value)); ^~~~~~~~~~~~ arch/arc/kernel/unwind.c:575:2: note: here case DW_EH_PE_native: ^~~~ Signed-off-by: Gustavo A. R. Silva --- arch/arc/kernel/unwind.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c index c2663fce7f6c..725adfcdd116 100644 --- a/arch/arc/kernel/unwind.c +++ b/arch/arc/kernel/unwind.c @@ -572,6 +572,7 @@ static unsigned long read_pointer(const u8 **pLoc, const void *end, #else BUILD_BUG_ON(sizeof(u32) != sizeof(value)); #endif + /* Fall through */ case DW_EH_PE_native: if (end < (const void *)(ptr.pul + 1)) return 0; -- cgit v1.2.3 From 7c9eb2dbd770b7c9980d5839dd305a70fbc5df67 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 27 Aug 2019 11:57:07 -0500 Subject: nds32: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: allmodconfig nds32): include/math-emu/soft-fp.h:124:8: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/nds32/kernel/signal.c:362:20: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/nds32/kernel/signal.c:315:7: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:417:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:430:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/soft-fp.h:124:8: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:417:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:430:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=] Reported-by: Michael Ellerman Signed-off-by: Gustavo A. R. Silva --- arch/nds32/kernel/signal.c | 2 ++ include/math-emu/op-common.h | 5 +++++ 2 files changed, 7 insertions(+) diff --git a/arch/nds32/kernel/signal.c b/arch/nds32/kernel/signal.c index fe61513982b4..330b19fcd990 100644 --- a/arch/nds32/kernel/signal.c +++ b/arch/nds32/kernel/signal.c @@ -316,6 +316,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) regs->uregs[0] = -EINTR; break; } + /* Else, fall through */ case -ERESTARTNOINTR: regs->uregs[0] = regs->orig_r0; regs->ipc -= 4; @@ -360,6 +361,7 @@ static void do_signal(struct pt_regs *regs) switch (regs->uregs[0]) { case -ERESTART_RESTARTBLOCK: regs->uregs[15] = __NR_restart_syscall; + /* Fall through */ case -ERESTARTNOHAND: case -ERESTARTSYS: case -ERESTARTNOINTR: diff --git a/include/math-emu/op-common.h b/include/math-emu/op-common.h index f37d12877754..adcc6a97db61 100644 --- a/include/math-emu/op-common.h +++ b/include/math-emu/op-common.h @@ -308,6 +308,7 @@ do { \ \ case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO): \ R##_e = X##_e; \ + /* Fall through */ \ case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL): \ case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF): \ case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO): \ @@ -318,6 +319,7 @@ do { \ \ case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL): \ R##_e = Y##_e; \ + /* Fall through */ \ case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN): \ case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN): \ case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN): \ @@ -415,6 +417,7 @@ do { \ case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF): \ case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO): \ R##_s = X##_s; \ + /* Fall through */ \ \ case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF): \ case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL): \ @@ -428,6 +431,7 @@ do { \ case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN): \ case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN): \ R##_s = Y##_s; \ + /* Fall through */ \ \ case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF): \ case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO): \ @@ -493,6 +497,7 @@ do { \ \ case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO): \ FP_SET_EXCEPTION(FP_EX_DIVZERO); \ + /* Fall through */ \ case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO): \ case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL): \ R##_c = FP_CLS_INF; \ -- cgit v1.2.3 From 689f535843ac2633b395cfc494446326d03efab6 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 19 Aug 2019 22:48:25 +0200 Subject: i2c: make i2c_unregister_device() ERR_PTR safe We are moving towards returning ERR_PTRs when i2c_new_*_device() calls fail. Make sure its counterpart for unregistering handles ERR_PTRs as well. Signed-off-by: Wolfram Sang Reviewed-by: Geert Uytterhoeven Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index f26ed495d384..9c440fa6a3dd 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -832,7 +832,7 @@ EXPORT_SYMBOL_GPL(i2c_new_device); */ void i2c_unregister_device(struct i2c_client *client) { - if (!client) + if (IS_ERR_OR_NULL(client)) return; if (client->dev.of_node) { -- cgit v1.2.3 From 01641b266da33e2cc57b4ea1767ba3e24ce0846b Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 16 Aug 2019 16:17:05 +0300 Subject: i2c: i801: Avoid memory leak in check_acpi_smo88xx_device() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit check_acpi_smo88xx_device() utilizes acpi_get_object_info() which in its turn allocates a buffer. User is responsible to clean allocated resources. The last has been missed in the original code. Fix it here. While here, replace !ACPI_SUCCESS() with ACPI_FAILURE(). Fixes: 19b07cb4a187 ("i2c: i801: Register optional lis3lv02d I2C device on Dell machines") Signed-off-by: Andy Shevchenko Reviewed-by: Pali Rohár Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-i801.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index f2956936c3f2..2e08b4722dc4 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1194,19 +1194,28 @@ static acpi_status check_acpi_smo88xx_device(acpi_handle obj_handle, int i; status = acpi_get_object_info(obj_handle, &info); - if (!ACPI_SUCCESS(status) || !(info->valid & ACPI_VALID_HID)) + if (ACPI_FAILURE(status)) return AE_OK; + if (!(info->valid & ACPI_VALID_HID)) + goto smo88xx_not_found; + hid = info->hardware_id.string; if (!hid) - return AE_OK; + goto smo88xx_not_found; i = match_string(acpi_smo8800_ids, ARRAY_SIZE(acpi_smo8800_ids), hid); if (i < 0) - return AE_OK; + goto smo88xx_not_found; + + kfree(info); *((bool *)return_value) = true; return AE_CTRL_TERMINATE; + +smo88xx_not_found: + kfree(info); + return AE_OK; } static bool is_dell_system_with_lis3lv02d(void) -- cgit v1.2.3 From c486dcd2f1bbdd524a1e0149734b79e4ae329650 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 15 Aug 2019 16:52:11 +0300 Subject: i2c: designware: Synchronize IRQs when unregistering slave client Make sure interrupt handler i2c_dw_irq_handler_slave() has finished before clearing the the dev->slave pointer in i2c_dw_unreg_slave(). There is possibility for a race if i2c_dw_irq_handler_slave() is running on another CPU while clearing the dev->slave pointer. Reported-by: Krzysztof Adamski Reported-by: Wolfram Sang Signed-off-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-slave.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c index e7f9305b2dd9..f5f001738df5 100644 --- a/drivers/i2c/busses/i2c-designware-slave.c +++ b/drivers/i2c/busses/i2c-designware-slave.c @@ -94,6 +94,7 @@ static int i2c_dw_unreg_slave(struct i2c_client *slave) dev->disable_int(dev); dev->disable(dev); + synchronize_irq(dev->irq); dev->slave = NULL; pm_runtime_put(dev->dev); -- cgit v1.2.3 From 7af0145067bc429a09ac4047b167c0971c9f0dc7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 29 Aug 2019 00:31:34 +0200 Subject: x86/mm/cpa: Prevent large page split when ftrace flips RW on kernel text ftrace does not use text_poke() for enabling trace functionality. It uses its own mechanism and flips the whole kernel text to RW and back to RO. The CPA rework removed a loop based check of 4k pages which tried to preserve a large page by checking each 4k page whether the change would actually cover all pages in the large page. This resulted in endless loops for nothing as in testing it turned out that it actually never preserved anything. Of course testing missed to include ftrace, which is the one and only case which benefitted from the 4k loop. As a consequence enabling function tracing or ftrace based kprobes results in a full 4k split of the kernel text, which affects iTLB performance. The kernel RO protection is the only valid case where this can actually preserve large pages. All other static protections (RO data, data NX, PCI, BIOS) are truly static. So a conflict with those protections which results in a split should only ever happen when a change of memory next to a protected region is attempted. But these conflicts are rightfully splitting the large page to preserve the protected regions. In fact a change to the protected regions itself is a bug and is warned about. Add an exception for the static protection check for kernel text RO when the to be changed region spawns a full large page which allows to preserve the large mappings. This also prevents the syslog to be spammed about CPA violations when ftrace is used. The exception needs to be removed once ftrace switched over to text_poke() which avoids the whole issue. Fixes: 585948f4f695 ("x86/mm/cpa: Avoid the 4k pages check completely") Reported-by: Song Liu Signed-off-by: Thomas Gleixner Tested-by: Song Liu Reviewed-by: Song Liu Acked-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1908282355340.1938@nanos.tec.linutronix.de --- arch/x86/mm/pageattr.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 6a9a77a403c9..e14e95ea7338 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -516,7 +516,7 @@ static inline void check_conflict(int warnlvl, pgprot_t prot, pgprotval_t val, */ static inline pgprot_t static_protections(pgprot_t prot, unsigned long start, unsigned long pfn, unsigned long npg, - int warnlvl) + unsigned long lpsize, int warnlvl) { pgprotval_t forbidden, res; unsigned long end; @@ -535,9 +535,17 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long start, check_conflict(warnlvl, prot, res, start, end, pfn, "Text NX"); forbidden = res; - res = protect_kernel_text_ro(start, end); - check_conflict(warnlvl, prot, res, start, end, pfn, "Text RO"); - forbidden |= res; + /* + * Special case to preserve a large page. If the change spawns the + * full large page mapping then there is no point to split it + * up. Happens with ftrace and is going to be removed once ftrace + * switched to text_poke(). + */ + if (lpsize != (npg * PAGE_SIZE) || (start & (lpsize - 1))) { + res = protect_kernel_text_ro(start, end); + check_conflict(warnlvl, prot, res, start, end, pfn, "Text RO"); + forbidden |= res; + } /* Check the PFN directly */ res = protect_pci_bios(pfn, pfn + npg - 1); @@ -819,7 +827,7 @@ static int __should_split_large_page(pte_t *kpte, unsigned long address, * extra conditional required here. */ chk_prot = static_protections(old_prot, lpaddr, old_pfn, numpages, - CPA_CONFLICT); + psize, CPA_CONFLICT); if (WARN_ON_ONCE(pgprot_val(chk_prot) != pgprot_val(old_prot))) { /* @@ -855,7 +863,7 @@ static int __should_split_large_page(pte_t *kpte, unsigned long address, * protection requirement in the large page. */ new_prot = static_protections(req_prot, lpaddr, old_pfn, numpages, - CPA_DETECT); + psize, CPA_DETECT); /* * If there is a conflict, split the large page. @@ -906,7 +914,8 @@ static void split_set_pte(struct cpa_data *cpa, pte_t *pte, unsigned long pfn, if (!cpa->force_static_prot) goto set; - prot = static_protections(ref_prot, address, pfn, npg, CPA_PROTECT); + /* Hand in lpsize = 0 to enforce the protection mechanism */ + prot = static_protections(ref_prot, address, pfn, npg, 0, CPA_PROTECT); if (pgprot_val(prot) == pgprot_val(ref_prot)) goto set; @@ -1503,7 +1512,8 @@ repeat: pgprot_val(new_prot) |= pgprot_val(cpa->mask_set); cpa_inc_4k_install(); - new_prot = static_protections(new_prot, address, pfn, 1, + /* Hand in lpsize = 0 to enforce the protection mechanism */ + new_prot = static_protections(new_prot, address, pfn, 1, 0, CPA_PROTECT); new_prot = pgprot_clear_protnone_bits(new_prot); -- cgit v1.2.3 From c7c06a1532f3fe106687ac82a13492c6a619ff1c Mon Sep 17 00:00:00 2001 From: Andrew Cooks Date: Fri, 2 Aug 2019 14:52:46 +0200 Subject: i2c: piix4: Fix port selection for AMD Family 16h Model 30h Family 16h Model 30h SMBus controller needs the same port selection fix as described and fixed in commit 0fe16195f891 ("i2c: piix4: Fix SMBus port selection for AMD Family 17h chips") commit 6befa3fde65f ("i2c: piix4: Support alternative port selection register") also fixed the port selection for Hudson2, but unfortunately this is not the exact same device and the AMD naming and PCI Device IDs aren't particularly helpful here. The SMBus port selection register is common to the following Families and models, as documented in AMD's publicly available BIOS and Kernel Developer Guides: 50742 - Family 15h Model 60h-6Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) 55072 - Family 15h Model 70h-7Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) 52740 - Family 16h Model 30h-3Fh (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) The Hudson2 PCI Device ID (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) is shared between Bolton FCH and Family 16h Model 30h, but the location of the SmBus0Sel port selection bits are different: 51192 - Bolton Register Reference Guide We distinguish between Bolton and Family 16h Model 30h using the PCI Revision ID: Bolton is device 0x780b, revision 0x15 Family 16h Model 30h is device 0x780b, revision 0x1F Family 15h Model 60h and 70h are both device 0x790b, revision 0x4A. The following additional public AMD BKDG documents were checked and do not share the same port selection register: 42301 - Family 15h Model 00h-0Fh doesn't mention any 42300 - Family 15h Model 10h-1Fh doesn't mention any 49125 - Family 15h Model 30h-3Fh doesn't mention any 48751 - Family 16h Model 00h-0Fh uses the previously supported index register SB800_PIIX4_PORT_IDX_ALT at 0x2e Signed-off-by: Andrew Cooks Signed-off-by: Jean Delvare Cc: stable@vger.kernel.org [v4.6+] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-piix4.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index c46c4bddc7ca..cba325eb852f 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -91,7 +91,7 @@ #define SB800_PIIX4_PORT_IDX_MASK 0x06 #define SB800_PIIX4_PORT_IDX_SHIFT 1 -/* On kerncz, SmBus0Sel is at bit 20:19 of PMx00 DecodeEn */ +/* On kerncz and Hudson2, SmBus0Sel is at bit 20:19 of PMx00 DecodeEn */ #define SB800_PIIX4_PORT_IDX_KERNCZ 0x02 #define SB800_PIIX4_PORT_IDX_MASK_KERNCZ 0x18 #define SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ 3 @@ -358,18 +358,16 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, /* Find which register is used for port selection */ if (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD || PIIX4_dev->vendor == PCI_VENDOR_ID_HYGON) { - switch (PIIX4_dev->device) { - case PCI_DEVICE_ID_AMD_KERNCZ_SMBUS: + if (PIIX4_dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS || + (PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS && + PIIX4_dev->revision >= 0x1F)) { piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_KERNCZ; piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK_KERNCZ; piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ; - break; - case PCI_DEVICE_ID_AMD_HUDSON2_SMBUS: - default: + } else { piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT; piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK; piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT; - break; } } else { if (!request_muxed_region(SB800_PIIX4_SMB_IDX, 2, -- cgit v1.2.3 From daf1de9078792a4d60e36aa7ecf3aadca65277c2 Mon Sep 17 00:00:00 2001 From: wenxu Date: Wed, 28 Aug 2019 23:02:33 +0800 Subject: netfilter: nft_meta_bridge: Fix get NFT_META_BRI_IIFVPROTO in network byteorder Get the vlan_proto of ingress bridge in network byteorder as userspace expects. Otherwise this is inconsistent with NFT_META_PROTOCOL. Fixes: 2a3a93ef0ba5 ("netfilter: nft_meta_bridge: Add NFT_META_BRI_IIFVPROTO support") Signed-off-by: wenxu Signed-off-by: Pablo Neira Ayuso --- net/bridge/netfilter/nft_meta_bridge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/netfilter/nft_meta_bridge.c b/net/bridge/netfilter/nft_meta_bridge.c index 1804e867f715..7c9e92b2f806 100644 --- a/net/bridge/netfilter/nft_meta_bridge.c +++ b/net/bridge/netfilter/nft_meta_bridge.c @@ -53,7 +53,7 @@ static void nft_meta_bridge_get_eval(const struct nft_expr *expr, goto err; br_vlan_get_proto(br_dev, &p_proto); - nft_reg_store16(dest, p_proto); + nft_reg_store16(dest, htons(p_proto)); return; } default: -- cgit v1.2.3 From 72741084d903e65e121c27bd29494d941729d4a1 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Tue, 27 Aug 2019 10:10:43 +0200 Subject: mmc: core: Fix init of SD cards reporting an invalid VDD range The OCR register defines the supported range of VDD voltages for SD cards. However, it has turned out that some SD cards reports an invalid voltage range, for example having bit7 set. When a host supports MMC_CAP2_FULL_PWR_CYCLE and some of the voltages from the invalid VDD range, this triggers the core to run a power cycle of the card to try to initialize it at the lowest common supported voltage. Obviously this fails, since the card can't support it. Let's fix this problem, by clearing invalid bits from the read OCR register for SD cards, before proceeding with the VDD voltage negotiation. Cc: stable@vger.kernel.org Reported-by: Philip Langdale Signed-off-by: Ulf Hansson Reviewed-by: Philip Langdale Tested-by: Philip Langdale Tested-by: Manuel Presnitz --- drivers/mmc/core/sd.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index d681e8aaca83..fe914ff5f5d6 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -1292,6 +1292,12 @@ int mmc_attach_sd(struct mmc_host *host) goto err; } + /* + * Some SD cards claims an out of spec VDD voltage range. Let's treat + * these bits as being in-valid and especially also bit7. + */ + ocr &= ~0x7FFF; + rocr = mmc_select_voltage(host, ocr); /* -- cgit v1.2.3 From efdaf27517a892238e0dfa046cd91184b039d681 Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Wed, 28 Aug 2019 10:17:32 +0800 Subject: mmc: sdhci-sprd: fixed incorrect clock divider The register SDHCI_CLOCK_CONTROL should be cleared before config clock divider, otherwise the frequency configured maybe lower than we expected. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang Signed-off-by: Chunyan Zhang Reviewed-by: Baolin Wang Tested-by: Baolin Wang Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-sprd.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c index 83a4767ca680..25f2fc4ce08f 100644 --- a/drivers/mmc/host/sdhci-sprd.c +++ b/drivers/mmc/host/sdhci-sprd.c @@ -217,10 +217,11 @@ static inline void _sdhci_sprd_set_clock(struct sdhci_host *host, struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); u32 div, val, mask; - div = sdhci_sprd_calc_div(sprd_host->base_rate, clk); + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); - clk |= ((div & 0x300) >> 2) | ((div & 0xFF) << 8); - sdhci_enable_clk(host, clk); + div = sdhci_sprd_calc_div(sprd_host->base_rate, clk); + div = ((div & 0x300) >> 2) | ((div & 0xFF) << 8); + sdhci_enable_clk(host, div); /* enable auto gate sdhc_enable_auto_gate */ val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI); -- cgit v1.2.3 From 4eae8cbdff942a423926486be4e781a77d619966 Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Wed, 28 Aug 2019 10:17:33 +0800 Subject: mmc: sdhci-sprd: add get_ro hook function sprd's sd host controller doesn't support write protect to sd card. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang Signed-off-by: Chunyan Zhang Reviewed-by: Baolin Wang Tested-by: Baolin Wang Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-sprd.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c index 25f2fc4ce08f..ddc048e72385 100644 --- a/drivers/mmc/host/sdhci-sprd.c +++ b/drivers/mmc/host/sdhci-sprd.c @@ -374,6 +374,11 @@ static unsigned int sdhci_sprd_get_max_timeout_count(struct sdhci_host *host) return 1 << 31; } +static unsigned int sdhci_sprd_get_ro(struct sdhci_host *host) +{ + return 0; +} + static struct sdhci_ops sdhci_sprd_ops = { .read_l = sdhci_sprd_readl, .write_l = sdhci_sprd_writel, @@ -386,6 +391,7 @@ static struct sdhci_ops sdhci_sprd_ops = { .set_uhs_signaling = sdhci_sprd_set_uhs_signaling, .hw_reset = sdhci_sprd_hw_reset, .get_max_timeout_count = sdhci_sprd_get_max_timeout_count, + .get_ro = sdhci_sprd_get_ro, }; static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq) -- cgit v1.2.3 From 6a526f66ab1494b63c71cd6639d9d96fd7216add Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Wed, 28 Aug 2019 10:17:34 +0800 Subject: mmc: sdhci-sprd: add SDHCI_QUIRK2_PRESET_VALUE_BROKEN The bit of PRESET_VAL_ENABLE in HOST_CONTROL2 register is reserved on sprd's sd host controller, set quirk2 to disable configuring this. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang Signed-off-by: Chunyan Zhang Reviewed-by: Baolin Wang Tested-by: Baolin Wang Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-sprd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c index ddc048e72385..130b75d37966 100644 --- a/drivers/mmc/host/sdhci-sprd.c +++ b/drivers/mmc/host/sdhci-sprd.c @@ -510,7 +510,8 @@ static void sdhci_sprd_phy_param_parse(struct sdhci_sprd_host *sprd_host, static const struct sdhci_pltfm_data sdhci_sprd_pdata = { .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK, .quirks2 = SDHCI_QUIRK2_BROKEN_HS200 | - SDHCI_QUIRK2_USE_32BIT_BLK_CNT, + SDHCI_QUIRK2_USE_32BIT_BLK_CNT | + SDHCI_QUIRK2_PRESET_VALUE_BROKEN, .ops = &sdhci_sprd_ops, }; -- cgit v1.2.3 From 4324e54bbea0107b054336f20075a26939b2bd51 Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Wed, 28 Aug 2019 10:17:35 +0800 Subject: mms: sdhci-sprd: add SDHCI_QUIRK_BROKEN_CARD_DETECTION sprd's sd host controller doesn't support detection to card insert or remove. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang Signed-off-by: Chunyan Zhang Reviewed-by: Baolin Wang Tested-by: Baolin Wang Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-sprd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c index 130b75d37966..ba777f0c77d1 100644 --- a/drivers/mmc/host/sdhci-sprd.c +++ b/drivers/mmc/host/sdhci-sprd.c @@ -508,7 +508,8 @@ static void sdhci_sprd_phy_param_parse(struct sdhci_sprd_host *sprd_host, } static const struct sdhci_pltfm_data sdhci_sprd_pdata = { - .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK, + .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION | + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK, .quirks2 = SDHCI_QUIRK2_BROKEN_HS200 | SDHCI_QUIRK2_USE_32BIT_BLK_CNT | SDHCI_QUIRK2_PRESET_VALUE_BROKEN, -- cgit v1.2.3 From 2f765c175e1d1acae911f889e71e5933c6488929 Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Wed, 28 Aug 2019 10:17:36 +0800 Subject: mmc: sdhci-sprd: clear the UHS-I modes read from registers sprd's sd host controller supports SDR50/SDR104/DDR50 though, the UHS-I mode used by the specific card can be selected via devicetree only. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang Signed-off-by: Chunyan Zhang Reviewed-by: Baolin Wang Tested-by: Baolin Wang Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-sprd.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c index ba777f0c77d1..d07b9793380f 100644 --- a/drivers/mmc/host/sdhci-sprd.c +++ b/drivers/mmc/host/sdhci-sprd.c @@ -509,7 +509,8 @@ static void sdhci_sprd_phy_param_parse(struct sdhci_sprd_host *sprd_host, static const struct sdhci_pltfm_data sdhci_sprd_pdata = { .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION | - SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK, + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | + SDHCI_QUIRK_MISSING_CAPS, .quirks2 = SDHCI_QUIRK2_BROKEN_HS200 | SDHCI_QUIRK2_USE_32BIT_BLK_CNT | SDHCI_QUIRK2_PRESET_VALUE_BROKEN, @@ -614,6 +615,16 @@ static int sdhci_sprd_probe(struct platform_device *pdev) sdhci_enable_v4_mode(host); + /* + * Supply the existing CAPS, but clear the UHS-I modes. This + * will allow these modes to be specified only by device + * tree properties through mmc_of_parse(). + */ + host->caps = sdhci_readl(host, SDHCI_CAPABILITIES); + host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1); + host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 | + SDHCI_SUPPORT_DDR50); + ret = sdhci_setup_host(host); if (ret) goto pm_runtime_disable; -- cgit v1.2.3 From e73a3896eaca95ea5fc895720502a3f040eb4b39 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 29 Aug 2019 19:49:26 +0900 Subject: mmc: sdhci-cadence: enable v4_mode to fix ADMA 64-bit addressing The IP datasheet says this controller is compatible with SD Host Specification Version v4.00. As it turned out, the ADMA of this IP does not work with 64-bit mode when it is in the Version 3.00 compatible mode; it understands the old 64-bit descriptor table (as defined in SDHCI v2), but the ADMA System Address Register (SDHCI_ADMA_ADDRESS) cannot point to the 64-bit address. I noticed this issue only after commit bd2e75633c80 ("dma-contiguous: use fallback alloc_pages for single pages"). Prior to that commit, dma_set_mask_and_coherent() returned the dma address that fits in 32-bit range, at least for the default arm64 configuration (arch/arm64/configs/defconfig). Now the host->adma_addr exceeds the 32-bit limit, causing the real problem for the Socionext SoCs. (As a side-note, I was also able to reproduce the issue for older kernels by turning off CONFIG_DMA_CMA.) Call sdhci_enable_v4_mode() to fix this. Cc: # v4.20+ Signed-off-by: Masahiro Yamada Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-cadence.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/sdhci-cadence.c b/drivers/mmc/host/sdhci-cadence.c index 163d1cf4367e..44139fceac24 100644 --- a/drivers/mmc/host/sdhci-cadence.c +++ b/drivers/mmc/host/sdhci-cadence.c @@ -369,6 +369,7 @@ static int sdhci_cdns_probe(struct platform_device *pdev) host->mmc_host_ops.execute_tuning = sdhci_cdns_execute_tuning; host->mmc_host_ops.hs400_enhanced_strobe = sdhci_cdns_hs400_enhanced_strobe; + sdhci_enable_v4_mode(host); sdhci_get_of_property(pdev); -- cgit v1.2.3 From 44d3bbb6f5e501b873218142fe08cdf62a4ac1f3 Mon Sep 17 00:00:00 2001 From: Josh Hunt Date: Mon, 19 Aug 2019 19:13:31 -0400 Subject: perf/x86/intel: Restrict period on Nehalem We see our Nehalem machines reporting 'perfevents: irq loop stuck!' in some cases when using perf: perfevents: irq loop stuck! WARNING: CPU: 0 PID: 3485 at arch/x86/events/intel/core.c:2282 intel_pmu_handle_irq+0x37b/0x530 ... RIP: 0010:intel_pmu_handle_irq+0x37b/0x530 ... Call Trace: ? perf_event_nmi_handler+0x2e/0x50 ? intel_pmu_save_and_restart+0x50/0x50 perf_event_nmi_handler+0x2e/0x50 nmi_handle+0x6e/0x120 default_do_nmi+0x3e/0x100 do_nmi+0x102/0x160 end_repeat_nmi+0x16/0x50 ... ? native_write_msr+0x6/0x20 ? native_write_msr+0x6/0x20 intel_pmu_enable_event+0x1ce/0x1f0 x86_pmu_start+0x78/0xa0 x86_pmu_enable+0x252/0x310 __perf_event_task_sched_in+0x181/0x190 ? __switch_to_asm+0x41/0x70 ? __switch_to_asm+0x35/0x70 ? __switch_to_asm+0x41/0x70 ? __switch_to_asm+0x35/0x70 finish_task_switch+0x158/0x260 __schedule+0x2f6/0x840 ? hrtimer_start_range_ns+0x153/0x210 schedule+0x32/0x80 schedule_hrtimeout_range_clock+0x8a/0x100 ? hrtimer_init+0x120/0x120 ep_poll+0x2f7/0x3a0 ? wake_up_q+0x60/0x60 do_epoll_wait+0xa9/0xc0 __x64_sys_epoll_wait+0x1a/0x20 do_syscall_64+0x4e/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fdeb1e96c03 ... Signed-off-by: Peter Zijlstra (Intel) Cc: acme@kernel.org Cc: Josh Hunt Cc: bpuranda@akamai.com Cc: mingo@redhat.com Cc: jolsa@redhat.com Cc: tglx@linutronix.de Cc: namhyung@kernel.org Cc: alexander.shishkin@linux.intel.com Link: https://lkml.kernel.org/r/1566256411-18820-1-git-send-email-johunt@akamai.com --- arch/x86/events/intel/core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index 648260b5f367..e4c2cb65ea50 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -3572,6 +3572,11 @@ static u64 bdw_limit_period(struct perf_event *event, u64 left) return left; } +static u64 nhm_limit_period(struct perf_event *event, u64 left) +{ + return max(left, 32ULL); +} + PMU_FORMAT_ATTR(event, "config:0-7" ); PMU_FORMAT_ATTR(umask, "config:8-15" ); PMU_FORMAT_ATTR(edge, "config:18" ); @@ -4606,6 +4611,7 @@ __init int intel_pmu_init(void) x86_pmu.pebs_constraints = intel_nehalem_pebs_event_constraints; x86_pmu.enable_all = intel_pmu_nhm_enable_all; x86_pmu.extra_regs = intel_nehalem_extra_regs; + x86_pmu.limit_period = nhm_limit_period; mem_attr = nhm_mem_events_attrs; -- cgit v1.2.3 From 0f4cd769c410e2285a4e9873a684d90423f03090 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Mon, 26 Aug 2019 14:57:30 -0500 Subject: perf/x86/amd/ibs: Fix sample bias for dispatched micro-ops When counting dispatched micro-ops with cnt_ctl=1, in order to prevent sample bias, IBS hardware preloads the least significant 7 bits of current count (IbsOpCurCnt) with random values, such that, after the interrupt is handled and counting resumes, the next sample taken will be slightly perturbed. The current count bitfield is in the IBS execution control h/w register, alongside the maximum count field. Currently, the IBS driver writes that register with the maximum count, leaving zeroes to fill the current count field, thereby overwriting the random bits the hardware preloaded for itself. Fix the driver to actually retain and carry those random bits from the read of the IBS control register, through to its write, instead of overwriting the lower current count bits with zeroes. Tested with: perf record -c 100001 -e ibs_op/cnt_ctl=1/pp -a -C 0 taskset -c 0 'perf annotate' output before: 15.70 65: addsd %xmm0,%xmm1 17.30 add $0x1,%rax 15.88 cmp %rdx,%rax je 82 17.32 72: test $0x1,%al jne 7c 7.52 movapd %xmm1,%xmm0 5.90 jmp 65 8.23 7c: sqrtsd %xmm1,%xmm0 12.15 jmp 65 'perf annotate' output after: 16.63 65: addsd %xmm0,%xmm1 16.82 add $0x1,%rax 16.81 cmp %rdx,%rax je 82 16.69 72: test $0x1,%al jne 7c 8.30 movapd %xmm1,%xmm0 8.13 jmp 65 8.24 7c: sqrtsd %xmm1,%xmm0 8.39 jmp 65 Tested on Family 15h and 17h machines. Machines prior to family 10h Rev. C don't have the RDWROPCNT capability, and have the IbsOpCurCnt bitfield reserved, so this patch shouldn't affect their operation. It is unknown why commit db98c5faf8cb ("perf/x86: Implement 64-bit counter support for IBS") ignored the lower 4 bits of the IbsOpCurCnt field; the number of preloaded random bits has always been 7, AFAICT. Signed-off-by: Kim Phillips Signed-off-by: Peter Zijlstra (Intel) Cc: "Arnaldo Carvalho de Melo" Cc: Cc: Ingo Molnar Cc: Ingo Molnar Cc: Jiri Olsa Cc: Thomas Gleixner Cc: "Borislav Petkov" Cc: Stephane Eranian Cc: Alexander Shishkin Cc: "Namhyung Kim" Cc: "H. Peter Anvin" Link: https://lkml.kernel.org/r/20190826195730.30614-1-kim.phillips@amd.com --- arch/x86/events/amd/ibs.c | 13 ++++++++++--- arch/x86/include/asm/perf_event.h | 12 ++++++++---- 2 files changed, 18 insertions(+), 7 deletions(-) diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c index 62f317c9113a..5b35b7ea5d72 100644 --- a/arch/x86/events/amd/ibs.c +++ b/arch/x86/events/amd/ibs.c @@ -661,10 +661,17 @@ fail: throttle = perf_event_overflow(event, &data, ®s); out: - if (throttle) + if (throttle) { perf_ibs_stop(event, 0); - else - perf_ibs_enable_event(perf_ibs, hwc, period >> 4); + } else { + period >>= 4; + + if ((ibs_caps & IBS_CAPS_RDWROPCNT) && + (*config & IBS_OP_CNT_CTL)) + period |= *config & IBS_OP_CUR_CNT_RAND; + + perf_ibs_enable_event(perf_ibs, hwc, period); + } perf_event_update_userpage(event); diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h index 1392d5e6e8d6..ee26e9215f18 100644 --- a/arch/x86/include/asm/perf_event.h +++ b/arch/x86/include/asm/perf_event.h @@ -252,16 +252,20 @@ struct pebs_lbr { #define IBSCTL_LVT_OFFSET_VALID (1ULL<<8) #define IBSCTL_LVT_OFFSET_MASK 0x0F -/* ibs fetch bits/masks */ +/* IBS fetch bits/masks */ #define IBS_FETCH_RAND_EN (1ULL<<57) #define IBS_FETCH_VAL (1ULL<<49) #define IBS_FETCH_ENABLE (1ULL<<48) #define IBS_FETCH_CNT 0xFFFF0000ULL #define IBS_FETCH_MAX_CNT 0x0000FFFFULL -/* ibs op bits/masks */ -/* lower 4 bits of the current count are ignored: */ -#define IBS_OP_CUR_CNT (0xFFFF0ULL<<32) +/* + * IBS op bits/masks + * The lower 7 bits of the current count are random bits + * preloaded by hardware and ignored in software + */ +#define IBS_OP_CUR_CNT (0xFFF80ULL<<32) +#define IBS_OP_CUR_CNT_RAND (0x0007FULL<<32) #define IBS_OP_CNT_CTL (1ULL<<19) #define IBS_OP_VAL (1ULL<<18) #define IBS_OP_ENABLE (1ULL<<17) -- cgit v1.2.3 From f08b2080e36057c9833596df8348c33daeb04d56 Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Tue, 13 Aug 2019 09:09:13 +0300 Subject: MAINTAINERS: i2c mv64xxx: Update documentation path Update MAINTAINERS record to reflect the file move from i2c-mv64xxx.txt to marvell,mv64xxx-i2c.yaml. Fixes: f8bbde72ef44 ("dt-bindings: i2c: mv64xxx: Add YAML schemas") Signed-off-by: Denis Efremov Acked-by: Maxime Ripard Acked-by: Gregory CLEMENT Signed-off-by: Wolfram Sang --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 9cbcf167bdd0..a21de6232ad1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7513,7 +7513,7 @@ I2C MV64XXX MARVELL AND ALLWINNER DRIVER M: Gregory CLEMENT L: linux-i2c@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt +F: Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml F: drivers/i2c/busses/i2c-mv64xxx.c I2C OVER PARALLEL PORT -- cgit v1.2.3 From b3d604d405166edfd4e1e6053409b85008f4f56d Mon Sep 17 00:00:00 2001 From: Lori Hikichi Date: Thu, 8 Aug 2019 09:07:52 +0530 Subject: i2c: iproc: Stop advertising support of SMBUS quick cmd The driver does not support the SMBUS Quick command so remove the flag that indicates that level of support. By default the i2c_detect tool uses the quick command to try and detect devices at some bus addresses. If the quick command is used then we will not detect the device, even though it is present. Fixes: e6e5dd3566e0 (i2c: iproc: Add Broadcom iProc I2C Driver) Signed-off-by: Lori Hikichi Signed-off-by: Rayagonda Kokatanur Reviewed-by: Ray Jui Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-bcm-iproc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index d7fd76baec92..19ef2b0c682a 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -790,7 +790,10 @@ static int bcm_iproc_i2c_xfer(struct i2c_adapter *adapter, static uint32_t bcm_iproc_i2c_functionality(struct i2c_adapter *adap) { - u32 val = I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; + u32 val; + + /* We do not support the SMBUS Quick command */ + val = I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); if (adap->algo->reg_slave) val |= I2C_FUNC_SLAVE; -- cgit v1.2.3 From abf4923e97c3abbbd1e59f0e13c7c214c93c6aaa Mon Sep 17 00:00:00 2001 From: Hsin-Yi Wang Date: Thu, 22 Aug 2019 17:45:17 +0800 Subject: i2c: mediatek: disable zero-length transfers for mt8183 Quoting from mt8183 datasheet, the number of transfers to be transferred in one transaction should be set to bigger than 1, so we should forbid zero-length transfer and update functionality. Reported-by: Alexandru M Stan Signed-off-by: Hsin-Yi Wang Reviewed-by: Qii Wang [wsa: shortened commit message a little] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mt65xx.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index 252edb433fdf..29eae1bf4f86 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -234,6 +234,10 @@ static const struct i2c_adapter_quirks mt7622_i2c_quirks = { .max_num_msgs = 255, }; +static const struct i2c_adapter_quirks mt8183_i2c_quirks = { + .flags = I2C_AQ_NO_ZERO_LEN, +}; + static const struct mtk_i2c_compatible mt2712_compat = { .regs = mt_i2c_regs_v1, .pmic_i2c = 0, @@ -298,6 +302,7 @@ static const struct mtk_i2c_compatible mt8173_compat = { }; static const struct mtk_i2c_compatible mt8183_compat = { + .quirks = &mt8183_i2c_quirks, .regs = mt_i2c_regs_v2, .pmic_i2c = 0, .dcm = 0, @@ -870,7 +875,11 @@ static irqreturn_t mtk_i2c_irq(int irqno, void *dev_id) static u32 mtk_i2c_functionality(struct i2c_adapter *adap) { - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; + if (adap->quirks->flags & I2C_AQ_NO_ZERO_LEN) + return I2C_FUNC_I2C | + (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); + else + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; } static const struct i2c_algorithm mtk_i2c_algorithm = { -- cgit v1.2.3 From 846d2db3e00048da3f650e0cfb0b8d67669cec3e Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Fri, 30 Aug 2019 16:52:26 +0100 Subject: keys: ensure that ->match_free() is called in request_key_and_link() If check_cached_key() returns a non-NULL value, we still need to call key_type::match_free() to undo key_type::match_preparse(). Fixes: 7743c48e54ee ("keys: Cache result of request_key*() temporarily in task_struct") Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- security/keys/request_key.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/keys/request_key.c b/security/keys/request_key.c index 7325f382dbf4..957b9e3e1492 100644 --- a/security/keys/request_key.c +++ b/security/keys/request_key.c @@ -595,7 +595,7 @@ struct key *request_key_and_link(struct key_type *type, key = check_cached_key(&ctx); if (key) - return key; + goto error_free; /* search all the process keyrings for a key */ rcu_read_lock(); -- cgit v1.2.3 From 7bd46644ea0f6021dc396a39a8bfd3a58f6f1f9f Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Thu, 4 Jul 2019 20:04:41 +0530 Subject: ftrace: Fix NULL pointer dereference in t_probe_next() LTP testsuite on powerpc results in the below crash: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc00000000029d800 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA PowerNV ... CPU: 68 PID: 96584 Comm: cat Kdump: loaded Tainted: G W NIP: c00000000029d800 LR: c00000000029dac4 CTR: c0000000001e6ad0 REGS: c0002017fae8ba10 TRAP: 0300 Tainted: G W MSR: 9000000000009033 CR: 28022422 XER: 20040000 CFAR: c00000000029d90c DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 0 ... NIP [c00000000029d800] t_probe_next+0x60/0x180 LR [c00000000029dac4] t_mod_start+0x1a4/0x1f0 Call Trace: [c0002017fae8bc90] [c000000000cdbc40] _cond_resched+0x10/0xb0 (unreliable) [c0002017fae8bce0] [c0000000002a15b0] t_start+0xf0/0x1c0 [c0002017fae8bd30] [c0000000004ec2b4] seq_read+0x184/0x640 [c0002017fae8bdd0] [c0000000004a57bc] sys_read+0x10c/0x300 [c0002017fae8be30] [c00000000000b388] system_call+0x5c/0x70 The test (ftrace_set_ftrace_filter.sh) is part of ftrace stress tests and the crash happens when the test does 'cat $TRACING_PATH/set_ftrace_filter'. The address points to the second line below, in t_probe_next(), where filter_hash is dereferenced: hash = iter->probe->ops.func_hash->filter_hash; size = 1 << hash->size_bits; This happens due to a race with register_ftrace_function_probe(). A new ftrace_func_probe is created and added into the func_probes list in trace_array under ftrace_lock. However, before initializing the filter, we drop ftrace_lock, and re-acquire it after acquiring regex_lock. If another process is trying to read set_ftrace_filter, it will be able to acquire ftrace_lock during this window and it will end up seeing a NULL filter_hash. Fix this by just checking for a NULL filter_hash in t_probe_next(). If the filter_hash is NULL, then this probe is just being added and we can simply return from here. Link: http://lkml.kernel.org/r/05e021f757625cbbb006fad41380323dbe4e3b43.1562249521.git.naveen.n.rao@linux.vnet.ibm.com Cc: stable@vger.kernel.org Fixes: 7b60f3d876156 ("ftrace: Dynamically create the probe ftrace_ops for the trace_array") Signed-off-by: Naveen N. Rao Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/ftrace.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index eca34503f178..80beed2cf0da 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -3095,6 +3095,10 @@ t_probe_next(struct seq_file *m, loff_t *pos) hnd = &iter->probe_entry->hlist; hash = iter->probe->ops.func_hash->filter_hash; + + if (!hash) + return NULL; + size = 1 << hash->size_bits; retry: -- cgit v1.2.3 From 372e0d01da71c84dcecf7028598a33813b0d5256 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Fri, 30 Aug 2019 16:30:01 -0400 Subject: ftrace: Check for empty hash and comment the race with registering probes The race between adding a function probe and reading the probes that exist is very subtle. It needs a comment. Also, the issue can also happen if the probe has has the EMPTY_HASH as its func_hash. Cc: stable@vger.kernel.org Fixes: 7b60f3d876156 ("ftrace: Dynamically create the probe ftrace_ops for the trace_array") Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/ftrace.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 80beed2cf0da..6200a6fe10e3 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -3096,7 +3096,11 @@ t_probe_next(struct seq_file *m, loff_t *pos) hash = iter->probe->ops.func_hash->filter_hash; - if (!hash) + /* + * A probe being registered may temporarily have an empty hash + * and it's at the end of the func_probes list. + */ + if (!hash || hash == EMPTY_HASH) return NULL; size = 1 << hash->size_bits; @@ -4324,6 +4328,10 @@ register_ftrace_function_probe(char *glob, struct trace_array *tr, mutex_unlock(&ftrace_lock); + /* + * Note, there's a small window here that the func_hash->filter_hash + * may be NULL or empty. Need to be carefule when reading the loop. + */ mutex_lock(&probe->ops.func_hash->regex_lock); orig_hash = &probe->ops.func_hash->filter_hash; -- cgit v1.2.3 From 5b0022dd32b7c2e15edf1827ba80aa1407edf9ff Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Thu, 4 Jul 2019 20:04:42 +0530 Subject: ftrace: Check for successful allocation of hash In register_ftrace_function_probe(), we are not checking the return value of alloc_and_copy_ftrace_hash(). The subsequent call to ftrace_match_records() may end up dereferencing the same. Add a check to ensure this doesn't happen. Link: http://lkml.kernel.org/r/26e92574f25ad23e7cafa3cf5f7a819de1832cbe.1562249521.git.naveen.n.rao@linux.vnet.ibm.com Cc: stable@vger.kernel.org Fixes: 1ec3a81a0cf42 ("ftrace: Have each function probe use its own ftrace_ops") Signed-off-by: Naveen N. Rao Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/ftrace.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 6200a6fe10e3..f9821a3374e9 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -4338,6 +4338,11 @@ register_ftrace_function_probe(char *glob, struct trace_array *tr, old_hash = *orig_hash; hash = alloc_and_copy_ftrace_hash(FTRACE_HASH_DEFAULT_BITS, old_hash); + if (!hash) { + ret = -ENOMEM; + goto out; + } + ret = ftrace_match_records(hash, glob, strlen(glob)); /* Nothing found? */ -- cgit v1.2.3 From b6b4dc4c1fa7f1c99398e7dc85758049645e9588 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Thu, 29 Aug 2019 10:46:00 +0800 Subject: amd-xgbe: Fix error path in xgbe_mod_init() In xgbe_mod_init(), we should do cleanup if some error occurs Reported-by: Hulk Robot Fixes: efbaa828330a ("amd-xgbe: Add support to handle device renaming") Fixes: 47f164deab22 ("amd-xgbe: Add PCI device support") Signed-off-by: YueHaibing Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-main.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-main.c b/drivers/net/ethernet/amd/xgbe/xgbe-main.c index b41f23679a08..7ce9c69e9c44 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-main.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-main.c @@ -469,13 +469,19 @@ static int __init xgbe_mod_init(void) ret = xgbe_platform_init(); if (ret) - return ret; + goto err_platform_init; ret = xgbe_pci_init(); if (ret) - return ret; + goto err_pci_init; return 0; + +err_pci_init: + xgbe_platform_exit(); +err_platform_init: + unregister_netdevice_notifier(&xgbe_netdev_notifier); + return ret; } static void __exit xgbe_mod_exit(void) -- cgit v1.2.3 From 3b25528e1e355c803e73aa326ce657b5606cda73 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 29 Aug 2019 11:17:24 +0800 Subject: net: stmmac: dwmac-rk: Don't fail if phy regulator is absent The devicetree binding lists the phy phy as optional. As such, the driver should not bail out if it can't find a regulator. Instead it should just skip the remaining regulator related code and continue on normally. Skip the remainder of phy_power_on() if a regulator supply isn't available. This also gets rid of the bogus return code. Fixes: 2e12f536635f ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator") Signed-off-by: Chen-Yu Tsai Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c index 4644b2aeeba1..e2e469c37a4d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c @@ -1194,10 +1194,8 @@ static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable) int ret; struct device *dev = &bsp_priv->pdev->dev; - if (!ldo) { - dev_err(dev, "no regulator found\n"); - return -1; - } + if (!ldo) + return 0; if (enable) { ret = regulator_enable(ldo); -- cgit v1.2.3 From d12040b6933f684a26773afad46dbba9778608d7 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 29 Aug 2019 14:12:11 +0100 Subject: rxrpc: Fix lack of conn cleanup when local endpoint is cleaned up [ver #2] When a local endpoint is ceases to be in use, such as when the kafs module is unloaded, the kernel will emit an assertion failure if there are any outstanding client connections: rxrpc: Assertion failed ------------[ cut here ]------------ kernel BUG at net/rxrpc/local_object.c:433! and even beyond that, will evince other oopses if there are service connections still present. Fix this by: (1) Removing the triggering of connection reaping when an rxrpc socket is released. These don't actually clean up the connections anyway - and further, the local endpoint may still be in use through another socket. (2) Mark the local endpoint as dead when we start the process of tearing it down. (3) When destroying a local endpoint, strip all of its client connections from the idle list and discard the ref on each that the list was holding. (4) When destroying a local endpoint, call the service connection reaper directly (rather than through a workqueue) to immediately kill off all outstanding service connections. (5) Make the service connection reaper reap connections for which the local endpoint is marked dead. Only after destroying the connections can we close the socket lest we get an oops in a workqueue that's looking at a connection or a peer. Fixes: 3d18cbb7fd0c ("rxrpc: Fix conn expiry timers") Signed-off-by: David Howells Tested-by: Marc Dionne Signed-off-by: David S. Miller --- net/rxrpc/af_rxrpc.c | 3 --- net/rxrpc/ar-internal.h | 1 + net/rxrpc/conn_client.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ net/rxrpc/conn_object.c | 2 +- net/rxrpc/local_object.c | 5 ++++- 5 files changed, 50 insertions(+), 5 deletions(-) diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c index 0dbbfd1b6487..d72ddb67bb74 100644 --- a/net/rxrpc/af_rxrpc.c +++ b/net/rxrpc/af_rxrpc.c @@ -862,7 +862,6 @@ static void rxrpc_sock_destructor(struct sock *sk) static int rxrpc_release_sock(struct sock *sk) { struct rxrpc_sock *rx = rxrpc_sk(sk); - struct rxrpc_net *rxnet = rxrpc_net(sock_net(&rx->sk)); _enter("%p{%d,%d}", sk, sk->sk_state, refcount_read(&sk->sk_refcnt)); @@ -898,8 +897,6 @@ static int rxrpc_release_sock(struct sock *sk) rxrpc_release_calls_on_socket(rx); flush_workqueue(rxrpc_workqueue); rxrpc_purge_queue(&sk->sk_receive_queue); - rxrpc_queue_work(&rxnet->service_conn_reaper); - rxrpc_queue_work(&rxnet->client_conn_reaper); rxrpc_unuse_local(rx->local); rx->local = NULL; diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h index 852e58781fda..8051dfdcf26d 100644 --- a/net/rxrpc/ar-internal.h +++ b/net/rxrpc/ar-internal.h @@ -910,6 +910,7 @@ void rxrpc_disconnect_client_call(struct rxrpc_call *); void rxrpc_put_client_conn(struct rxrpc_connection *); void rxrpc_discard_expired_client_conns(struct work_struct *); void rxrpc_destroy_all_client_connections(struct rxrpc_net *); +void rxrpc_clean_up_local_conns(struct rxrpc_local *); /* * conn_event.c diff --git a/net/rxrpc/conn_client.c b/net/rxrpc/conn_client.c index aea82f909c60..3f1da1b49f69 100644 --- a/net/rxrpc/conn_client.c +++ b/net/rxrpc/conn_client.c @@ -1162,3 +1162,47 @@ void rxrpc_destroy_all_client_connections(struct rxrpc_net *rxnet) _leave(""); } + +/* + * Clean up the client connections on a local endpoint. + */ +void rxrpc_clean_up_local_conns(struct rxrpc_local *local) +{ + struct rxrpc_connection *conn, *tmp; + struct rxrpc_net *rxnet = local->rxnet; + unsigned int nr_active; + LIST_HEAD(graveyard); + + _enter(""); + + spin_lock(&rxnet->client_conn_cache_lock); + nr_active = rxnet->nr_active_client_conns; + + list_for_each_entry_safe(conn, tmp, &rxnet->idle_client_conns, + cache_link) { + if (conn->params.local == local) { + ASSERTCMP(conn->cache_state, ==, RXRPC_CONN_CLIENT_IDLE); + + trace_rxrpc_client(conn, -1, rxrpc_client_discard); + if (!test_and_clear_bit(RXRPC_CONN_EXPOSED, &conn->flags)) + BUG(); + conn->cache_state = RXRPC_CONN_CLIENT_INACTIVE; + list_move(&conn->cache_link, &graveyard); + nr_active--; + } + } + + rxnet->nr_active_client_conns = nr_active; + spin_unlock(&rxnet->client_conn_cache_lock); + ASSERTCMP(nr_active, >=, 0); + + while (!list_empty(&graveyard)) { + conn = list_entry(graveyard.next, + struct rxrpc_connection, cache_link); + list_del_init(&conn->cache_link); + + rxrpc_put_connection(conn); + } + + _leave(" [culled]"); +} diff --git a/net/rxrpc/conn_object.c b/net/rxrpc/conn_object.c index 434ef392212b..ed05b6922132 100644 --- a/net/rxrpc/conn_object.c +++ b/net/rxrpc/conn_object.c @@ -398,7 +398,7 @@ void rxrpc_service_connection_reaper(struct work_struct *work) if (conn->state == RXRPC_CONN_SERVICE_PREALLOC) continue; - if (rxnet->live) { + if (rxnet->live && !conn->params.local->dead) { idle_timestamp = READ_ONCE(conn->idle_timestamp); expire_at = idle_timestamp + rxrpc_connection_expiry * HZ; if (conn->params.local->service_closed) diff --git a/net/rxrpc/local_object.c b/net/rxrpc/local_object.c index 72a6e12a9304..36587260cabd 100644 --- a/net/rxrpc/local_object.c +++ b/net/rxrpc/local_object.c @@ -426,11 +426,14 @@ static void rxrpc_local_destroyer(struct rxrpc_local *local) _enter("%d", local->debug_id); + local->dead = true; + mutex_lock(&rxnet->local_mutex); list_del_init(&local->link); mutex_unlock(&rxnet->local_mutex); - ASSERT(RB_EMPTY_ROOT(&local->client_conns)); + rxrpc_clean_up_local_conns(local); + rxrpc_service_connection_reaper(&rxnet->service_conn_reaper); ASSERT(!local->service); if (socket) { -- cgit v1.2.3 From bee07b33db78d4ee7ed6a2fe810b9473d5471fe4 Mon Sep 17 00:00:00 2001 From: Roman Gushchin Date: Fri, 30 Aug 2019 16:04:32 -0700 Subject: mm: memcontrol: flush percpu slab vmstats on kmem offlining I've noticed that the "slab" value in memory.stat is sometimes 0, even if some children memory cgroups have a non-zero "slab" value. The following investigation showed that this is the result of the kmem_cache reparenting in combination with the per-cpu batching of slab vmstats. At the offlining some vmstat value may leave in the percpu cache, not being propagated upwards by the cgroup hierarchy. It means that stats on ancestor levels are lower than actual. Later when slab pages are released, the precise number of pages is substracted on the parent level, making the value negative. We don't show negative values, 0 is printed instead. To fix this issue, let's flush percpu slab memcg and lruvec stats on memcg offlining. This guarantees that numbers on all ancestor levels are accurate and match the actual number of outstanding slab pages. Link: http://lkml.kernel.org/r/20190819202338.363363-3-guro@fb.com Fixes: fb2f2b0adb98 ("mm: memcg/slab: reparent memcg kmem_caches on cgroup removal") Signed-off-by: Roman Gushchin Cc: Johannes Weiner Cc: Michal Hocko Cc: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 5 +++-- mm/memcontrol.c | 35 +++++++++++++++++++++++++++-------- 2 files changed, 30 insertions(+), 10 deletions(-) diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index d77d717c620c..3f38c30d2f13 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -215,8 +215,9 @@ enum node_stat_item { NR_INACTIVE_FILE, /* " " " " " */ NR_ACTIVE_FILE, /* " " " " " */ NR_UNEVICTABLE, /* " " " " " */ - NR_SLAB_RECLAIMABLE, - NR_SLAB_UNRECLAIMABLE, + NR_SLAB_RECLAIMABLE, /* Please do not reorder this item */ + NR_SLAB_UNRECLAIMABLE, /* and this one without looking at + * memcg_flush_percpu_vmstats() first. */ NR_ISOLATED_ANON, /* Temporary isolated pages from anon lru */ NR_ISOLATED_FILE, /* Temporary isolated pages from file lru */ WORKINGSET_NODES, diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 26e2999af608..1f585d6c77c1 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -3260,37 +3260,49 @@ static u64 mem_cgroup_read_u64(struct cgroup_subsys_state *css, } } -static void memcg_flush_percpu_vmstats(struct mem_cgroup *memcg) +static void memcg_flush_percpu_vmstats(struct mem_cgroup *memcg, bool slab_only) { unsigned long stat[MEMCG_NR_STAT]; struct mem_cgroup *mi; int node, cpu, i; + int min_idx, max_idx; - for (i = 0; i < MEMCG_NR_STAT; i++) + if (slab_only) { + min_idx = NR_SLAB_RECLAIMABLE; + max_idx = NR_SLAB_UNRECLAIMABLE; + } else { + min_idx = 0; + max_idx = MEMCG_NR_STAT; + } + + for (i = min_idx; i < max_idx; i++) stat[i] = 0; for_each_online_cpu(cpu) - for (i = 0; i < MEMCG_NR_STAT; i++) + for (i = min_idx; i < max_idx; i++) stat[i] += raw_cpu_read(memcg->vmstats_percpu->stat[i]); for (mi = memcg; mi; mi = parent_mem_cgroup(mi)) - for (i = 0; i < MEMCG_NR_STAT; i++) + for (i = min_idx; i < max_idx; i++) atomic_long_add(stat[i], &mi->vmstats[i]); + if (!slab_only) + max_idx = NR_VM_NODE_STAT_ITEMS; + for_each_node(node) { struct mem_cgroup_per_node *pn = memcg->nodeinfo[node]; struct mem_cgroup_per_node *pi; - for (i = 0; i < NR_VM_NODE_STAT_ITEMS; i++) + for (i = min_idx; i < max_idx; i++) stat[i] = 0; for_each_online_cpu(cpu) - for (i = 0; i < NR_VM_NODE_STAT_ITEMS; i++) + for (i = min_idx; i < max_idx; i++) stat[i] += raw_cpu_read( pn->lruvec_stat_cpu->count[i]); for (pi = pn; pi; pi = parent_nodeinfo(pi, node)) - for (i = 0; i < NR_VM_NODE_STAT_ITEMS; i++) + for (i = min_idx; i < max_idx; i++) atomic_long_add(stat[i], &pi->lruvec_stat[i]); } } @@ -3363,7 +3375,14 @@ static void memcg_offline_kmem(struct mem_cgroup *memcg) if (!parent) parent = root_mem_cgroup; + /* + * Deactivate and reparent kmem_caches. Then flush percpu + * slab statistics to have precise values at the parent and + * all ancestor levels. It's required to keep slab stats + * accurate after the reparenting of kmem_caches. + */ memcg_deactivate_kmem_caches(memcg, parent); + memcg_flush_percpu_vmstats(memcg, true); kmemcg_id = memcg->kmemcg_id; BUG_ON(kmemcg_id < 0); @@ -4740,7 +4759,7 @@ static void __mem_cgroup_free(struct mem_cgroup *memcg) * Flush percpu vmstats and vmevents to guarantee the value correctness * on parent's and all ancestor levels. */ - memcg_flush_percpu_vmstats(memcg); + memcg_flush_percpu_vmstats(memcg, false); memcg_flush_percpu_vmevents(memcg); for_each_node(node) free_mem_cgroup_per_node_info(memcg, node); -- cgit v1.2.3 From 441e254cd40dc03beec3c650ce6ce6074bc6517f Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 30 Aug 2019 16:04:35 -0700 Subject: mm/zsmalloc.c: fix build when CONFIG_COMPACTION=n Fixes: 701d678599d0c1 ("mm/zsmalloc.c: fix race condition in zs_destroy_pool") Link: http://lkml.kernel.org/r/201908251039.5oSbEEUT%25lkp@intel.com Reported-by: kbuild test robot Cc: Sergey Senozhatsky Cc: Henry Burns Cc: Minchan Kim Cc: Shakeel Butt Cc: Jonathan Adams Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/zsmalloc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c index 08def3a0d200..e98bb6ab4f7e 100644 --- a/mm/zsmalloc.c +++ b/mm/zsmalloc.c @@ -2412,7 +2412,9 @@ struct zs_pool *zs_create_pool(const char *name) if (!pool->name) goto err; +#ifdef CONFIG_COMPACTION init_waitqueue_head(&pool->migration_wait); +#endif if (create_cache(pool)) goto err; -- cgit v1.2.3 From b4c46484dc3fa3721d68fdfae85c1d7b1f6b5472 Mon Sep 17 00:00:00 2001 From: Roman Gushchin Date: Fri, 30 Aug 2019 16:04:39 -0700 Subject: mm, memcg: partially revert "mm/memcontrol.c: keep local VM counters in sync with the hierarchical ones" Commit 766a4c19d880 ("mm/memcontrol.c: keep local VM counters in sync with the hierarchical ones") effectively decreased the precision of per-memcg vmstats_local and per-memcg-per-node lruvec percpu counters. That's good for displaying in memory.stat, but brings a serious regression into the reclaim process. One issue I've discovered and debugged is the following: lruvec_lru_size() can return 0 instead of the actual number of pages in the lru list, preventing the kernel to reclaim last remaining pages. Result is yet another dying memory cgroups flooding. The opposite is also happening: scanning an empty lru list is the waste of cpu time. Also, inactive_list_is_low() can return incorrect values, preventing the active lru from being scanned and freed. It can fail both because the size of active and inactive lists are inaccurate, and because the number of workingset refaults isn't precise. In other words, the result is pretty random. I'm not sure, if using the approximate number of slab pages in count_shadow_number() is acceptable, but issues described above are enough to partially revert the patch. Let's keep per-memcg vmstat_local batched (they are only used for displaying stats to the userspace), but keep lruvec stats precise. This change fixes the dead memcg flooding on my setup. Link: http://lkml.kernel.org/r/20190817004726.2530670-1-guro@fb.com Fixes: 766a4c19d880 ("mm/memcontrol.c: keep local VM counters in sync with the hierarchical ones") Signed-off-by: Roman Gushchin Acked-by: Yafang Shao Cc: Johannes Weiner Cc: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 1f585d6c77c1..a247cb163245 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -752,15 +752,13 @@ void __mod_lruvec_state(struct lruvec *lruvec, enum node_stat_item idx, /* Update memcg */ __mod_memcg_state(memcg, idx, val); + /* Update lruvec */ + __this_cpu_add(pn->lruvec_stat_local->count[idx], val); + x = val + __this_cpu_read(pn->lruvec_stat_cpu->count[idx]); if (unlikely(abs(x) > MEMCG_CHARGE_BATCH)) { struct mem_cgroup_per_node *pi; - /* - * Batch local counters to keep them in sync with - * the hierarchical ones. - */ - __this_cpu_add(pn->lruvec_stat_local->count[idx], x); for (pi = pn; pi; pi = parent_nodeinfo(pi, pgdat->node_id)) atomic_long_add(x, &pi->lruvec_stat[idx]); x = 0; -- cgit v1.2.3 From 14108b9131a47ff18a3c640f583eb2d625c75c0d Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Fri, 30 Aug 2019 16:04:43 -0700 Subject: mm/z3fold.c: fix lock/unlock imbalance in z3fold_page_isolate Fix lock/unlock imbalance by unlocking *zhdr* before return. Addresses Coverity ID 1452811 ("Missing unlock") Link: http://lkml.kernel.org/r/20190826030634.GA4379@embeddedor Fixes: d776aaa9895e ("mm/z3fold.c: fix race between migration and destruction") Signed-off-by: Gustavo A. R. Silva Reviewed-by: Andrew Morton Cc: Henry Burns Cc: Vitaly Wool Cc: Shakeel Butt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/z3fold.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/z3fold.c b/mm/z3fold.c index e31cd9bd4ed5..75b7962439ff 100644 --- a/mm/z3fold.c +++ b/mm/z3fold.c @@ -1406,6 +1406,7 @@ static bool z3fold_page_isolate(struct page *page, isolate_mode_t mode) * should freak out. */ WARN(1, "Z3fold is experiencing kref problems\n"); + z3fold_page_unlock(zhdr); return false; } z3fold_page_unlock(zhdr); -- cgit v1.2.3 From a6c135bb1a59b5d67c8c45b214d3427d65dd7c00 Mon Sep 17 00:00:00 2001 From: Dmitry Safonov Date: Fri, 30 Aug 2019 16:04:46 -0700 Subject: mailmap: add aliases for Dmitry Safonov I don't work for Virtuozzo or Samsung anymore and I've noticed that they have started sending annoying html email-replies. And I prioritize my personal emails over work email box, so while at it add an entry for Arista too - so I can reply faster when needed. Link: http://lkml.kernel.org/r/20190827220346.11123-1-dima@arista.com Signed-off-by: Dmitry Safonov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- .mailmap | 3 +++ 1 file changed, 3 insertions(+) diff --git a/.mailmap b/.mailmap index ebdca3fba91f..afaad605284a 100644 --- a/.mailmap +++ b/.mailmap @@ -64,6 +64,9 @@ Dengcheng Zhu Dengcheng Zhu Dengcheng Zhu Dmitry Eremin-Solenikov +Dmitry Safonov <0x7f454c46@gmail.com> +Dmitry Safonov <0x7f454c46@gmail.com> +Dmitry Safonov <0x7f454c46@gmail.com> Domen Puncer Douglas Gilbert Ed L. Cashin -- cgit v1.2.3 From d2e5fb927ee7f52c1fe2a98b554881e9dffd8514 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Fri, 30 Aug 2019 16:04:50 -0700 Subject: mm, memcg: do not set reclaim_state on soft limit reclaim Adric Blake has noticed[1] the following warning: WARNING: CPU: 7 PID: 175 at mm/vmscan.c:245 set_task_reclaim_state+0x1e/0x40 [...] Call Trace: mem_cgroup_shrink_node+0x9b/0x1d0 mem_cgroup_soft_limit_reclaim+0x10c/0x3a0 balance_pgdat+0x276/0x540 kswapd+0x200/0x3f0 ? wait_woken+0x80/0x80 kthread+0xfd/0x130 ? balance_pgdat+0x540/0x540 ? kthread_park+0x80/0x80 ret_from_fork+0x35/0x40 ---[ end trace 727343df67b2398a ]--- which tells us that soft limit reclaim is about to overwrite the reclaim_state configured up in the call chain (kswapd in this case but the direct reclaim is equally possible). This means that reclaim stats would get misleading once the soft reclaim returns and another reclaim is done. Fix the warning by dropping set_task_reclaim_state from the soft reclaim which is always called with reclaim_state set up. [1] http://lkml.kernel.org/r/CAE1jjeePxYPvw1mw2B3v803xHVR_BNnz0hQUY_JDMN8ny29M6w@mail.gmail.com Link: http://lkml.kernel.org/r/20190828071808.20410-1-mhocko@kernel.org Signed-off-by: Michal Hocko Reported-by: Adric Blake Acked-by: Yafang Shao Acked-by: Yang Shi Cc: Johannes Weiner Cc: Hillf Danton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmscan.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index c77d1e3761a7..a6c5d0b28321 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -3220,6 +3220,7 @@ unsigned long try_to_free_pages(struct zonelist *zonelist, int order, #ifdef CONFIG_MEMCG +/* Only used by soft limit reclaim. Do not reuse for anything else. */ unsigned long mem_cgroup_shrink_node(struct mem_cgroup *memcg, gfp_t gfp_mask, bool noswap, pg_data_t *pgdat, @@ -3235,7 +3236,8 @@ unsigned long mem_cgroup_shrink_node(struct mem_cgroup *memcg, }; unsigned long lru_pages; - set_task_reclaim_state(current, &sc.reclaim_state); + WARN_ON_ONCE(!current->reclaim_state); + sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) | (GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK); @@ -3253,7 +3255,6 @@ unsigned long mem_cgroup_shrink_node(struct mem_cgroup *memcg, trace_mm_vmscan_memcg_softlimit_reclaim_end(sc.nr_reclaimed); - set_task_reclaim_state(current, NULL); *nr_scanned = sc.nr_scanned; return sc.nr_reclaimed; -- cgit v1.2.3 From 6c1c280805ded72eceb2afc1a0d431b256608554 Mon Sep 17 00:00:00 2001 From: Shakeel Butt Date: Fri, 30 Aug 2019 16:04:53 -0700 Subject: mm: memcontrol: fix percpu vmstats and vmevents flush Instead of using raw_cpu_read() use per_cpu() to read the actual data of the corresponding cpu otherwise we will be reading the data of the current cpu for the number of online CPUs. Link: http://lkml.kernel.org/r/20190829203110.129263-1-shakeelb@google.com Fixes: bb65f89b7d3d ("mm: memcontrol: flush percpu vmevents before releasing memcg") Fixes: c350a99ea2b1 ("mm: memcontrol: flush percpu vmstats before releasing memcg") Signed-off-by: Shakeel Butt Acked-by: Roman Gushchin Acked-by: Michal Hocko Cc: Johannes Weiner Cc: Vladimir Davydov Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index a247cb163245..9ec5e12486a7 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -3278,7 +3278,7 @@ static void memcg_flush_percpu_vmstats(struct mem_cgroup *memcg, bool slab_only) for_each_online_cpu(cpu) for (i = min_idx; i < max_idx; i++) - stat[i] += raw_cpu_read(memcg->vmstats_percpu->stat[i]); + stat[i] += per_cpu(memcg->vmstats_percpu->stat[i], cpu); for (mi = memcg; mi; mi = parent_mem_cgroup(mi)) for (i = min_idx; i < max_idx; i++) @@ -3296,8 +3296,8 @@ static void memcg_flush_percpu_vmstats(struct mem_cgroup *memcg, bool slab_only) for_each_online_cpu(cpu) for (i = min_idx; i < max_idx; i++) - stat[i] += raw_cpu_read( - pn->lruvec_stat_cpu->count[i]); + stat[i] += per_cpu( + pn->lruvec_stat_cpu->count[i], cpu); for (pi = pn; pi; pi = parent_nodeinfo(pi, node)) for (i = min_idx; i < max_idx; i++) @@ -3316,8 +3316,8 @@ static void memcg_flush_percpu_vmevents(struct mem_cgroup *memcg) for_each_online_cpu(cpu) for (i = 0; i < NR_VM_EVENT_ITEMS; i++) - events[i] += raw_cpu_read( - memcg->vmstats_percpu->events[i]); + events[i] += per_cpu(memcg->vmstats_percpu->events[i], + cpu); for (mi = memcg; mi; mi = parent_mem_cgroup(mi)) for (i = 0; i < NR_VM_EVENT_ITEMS; i++) -- cgit v1.2.3 From ab9bb6318b0967671e0c9b6537c1537d51ca4f45 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 30 Aug 2019 18:47:15 -0700 Subject: Partially revert "kfifo: fix kfifo_alloc() and kfifo_init()" Commit dfe2a77fd243 ("kfifo: fix kfifo_alloc() and kfifo_init()") made the kfifo code round the number of elements up. That was good for __kfifo_alloc(), but it's actually wrong for __kfifo_init(). The difference? __kfifo_alloc() will allocate the rounded-up number of elements, but __kfifo_init() uses an allocation done by the caller. We can't just say "use more elements than the caller allocated", and have to round down. The good news? All the normal cases will be using power-of-two arrays anyway, and most users of kfifo's don't use kfifo_init() at all, but one of the helper macros to declare a KFIFO that enforce the proper power-of-two behavior. But it looks like at least ibmvscsis might be affected. The bad news? Will Deacon refers to an old thread and points points out that the memory ordering in kfifo's is questionable. See https://lore.kernel.org/lkml/20181211034032.32338-1-yuleixzhang@tencent.com/ for more. Fixes: dfe2a77fd243 ("kfifo: fix kfifo_alloc() and kfifo_init()") Reported-by: laokz Cc: Stefani Seibold Cc: Andrew Morton Cc: Dan Carpenter Cc: Greg KH Cc: Kees Cook Cc: Will Deacon Signed-off-by: Linus Torvalds --- lib/kfifo.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/lib/kfifo.c b/lib/kfifo.c index 117ad0e7fbf4..70dab9ac7827 100644 --- a/lib/kfifo.c +++ b/lib/kfifo.c @@ -68,7 +68,8 @@ int __kfifo_init(struct __kfifo *fifo, void *buffer, { size /= esize; - size = roundup_pow_of_two(size); + if (!is_power_of_2(size)) + size = rounddown_pow_of_two(size); fifo->in = 0; fifo->out = 0; -- cgit v1.2.3 From 595a438c78dbdc43d6c9db4f437267f0bd1548bf Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Thu, 4 Jul 2019 20:21:10 +0300 Subject: tracing: Make exported ftrace_set_clr_event non-static The function ftrace_set_clr_event is declared static and marked EXPORT_SYMBOL_GPL(), which is at best an odd combination. Because the function was decided to be a part of API, this commit removes the static attribute and adds the declaration to the header. Link: http://lkml.kernel.org/r/20190704172110.27041-1-efremov@linux.com Fixes: f45d1225adb04 ("tracing: Kernel access to Ftrace instances") Reviewed-by: Joe Jin Signed-off-by: Denis Efremov Signed-off-by: Steven Rostedt (VMware) --- include/linux/trace_events.h | 1 + kernel/trace/trace_events.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/trace_events.h b/include/linux/trace_events.h index 5150436783e8..30a8cdcfd4a4 100644 --- a/include/linux/trace_events.h +++ b/include/linux/trace_events.h @@ -548,6 +548,7 @@ extern int trace_event_get_offsets(struct trace_event_call *call); #define is_signed_type(type) (((type)(-1)) < (type)1) +int ftrace_set_clr_event(struct trace_array *tr, char *buf, int set); int trace_set_clr_event(const char *system, const char *event, int set); /* diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c index c7506bc81b75..648930823b57 100644 --- a/kernel/trace/trace_events.c +++ b/kernel/trace/trace_events.c @@ -787,7 +787,7 @@ static int __ftrace_set_clr_event(struct trace_array *tr, const char *match, return ret; } -static int ftrace_set_clr_event(struct trace_array *tr, char *buf, int set) +int ftrace_set_clr_event(struct trace_array *tr, char *buf, int set) { char *event = NULL, *sub = NULL, *match; int ret; -- cgit v1.2.3 From 19a58ce1dc72264b9d50ff6d86cc36b3c439fb64 Mon Sep 17 00:00:00 2001 From: Xinpeng Liu Date: Thu, 8 Aug 2019 07:29:23 +0800 Subject: tracing/probe: Fix null pointer dereference BUG: KASAN: null-ptr-deref in trace_probe_cleanup+0x8d/0xd0 Read of size 8 at addr 0000000000000000 by task syz-executor.0/9746 trace_probe_cleanup+0x8d/0xd0 free_trace_kprobe.part.14+0x15/0x50 alloc_trace_kprobe+0x23e/0x250 Link: http://lkml.kernel.org/r/1565220563-980-1-git-send-email-danielliu861@gmail.com Fixes: e3dc9f898ef9c ("tracing/probe: Add trace_event_call accesses APIs") Signed-off-by: Xinpeng Liu Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_probe.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace_probe.c b/kernel/trace/trace_probe.c index dbef0d135075..fb6bfbc5bf86 100644 --- a/kernel/trace/trace_probe.c +++ b/kernel/trace/trace_probe.c @@ -895,7 +895,8 @@ void trace_probe_cleanup(struct trace_probe *tp) for (i = 0; i < tp->nr_args; i++) traceprobe_free_probe_arg(&tp->args[i]); - kfree(call->class->system); + if (call->class) + kfree(call->class->system); kfree(call->name); kfree(call->print_fmt); } -- cgit v1.2.3 From 2e815627318910fb2ab004670a83ba27ac2228b6 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Mon, 26 Aug 2019 09:13:12 +0000 Subject: ftrace/x86: Remove mcount() declaration Commit 562e14f72292 ("ftrace/x86: Remove mcount support") removed the support for using mcount, so we could remove the mcount() declaration to clean up. Link: http://lkml.kernel.org/r/20190826170150.10f101ba@xhacker.debian Signed-off-by: Jisheng Zhang Signed-off-by: Steven Rostedt (VMware) --- arch/x86/include/asm/ftrace.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h index 287f1f7b2e52..c38a66661576 100644 --- a/arch/x86/include/asm/ftrace.h +++ b/arch/x86/include/asm/ftrace.h @@ -16,7 +16,6 @@ #define HAVE_FUNCTION_GRAPH_RET_ADDR_PTR #ifndef __ASSEMBLY__ -extern void mcount(void); extern atomic_t modifying_ftrace_code; extern void __fentry__(void); -- cgit v1.2.3 From c68c9ec1c52e5bcd221eb09bc5344ad4f407b204 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Tue, 27 Aug 2019 22:25:47 -0700 Subject: tracing: Correct kdoc formats Fix the following kdoc warnings: kernel/trace/trace.c:1579: warning: Function parameter or member 'tr' not described in 'update_max_tr_single' kernel/trace/trace.c:1579: warning: Function parameter or member 'tsk' not described in 'update_max_tr_single' kernel/trace/trace.c:1579: warning: Function parameter or member 'cpu' not described in 'update_max_tr_single' kernel/trace/trace.c:1776: warning: Function parameter or member 'type' not described in 'register_tracer' kernel/trace/trace.c:2239: warning: Function parameter or member 'task' not described in 'tracing_record_taskinfo' kernel/trace/trace.c:2239: warning: Function parameter or member 'flags' not described in 'tracing_record_taskinfo' kernel/trace/trace.c:2269: warning: Function parameter or member 'prev' not described in 'tracing_record_taskinfo_sched_switch' kernel/trace/trace.c:2269: warning: Function parameter or member 'next' not described in 'tracing_record_taskinfo_sched_switch' kernel/trace/trace.c:2269: warning: Function parameter or member 'flags' not described in 'tracing_record_taskinfo_sched_switch' kernel/trace/trace.c:3078: warning: Function parameter or member 'ip' not described in 'trace_vbprintk' kernel/trace/trace.c:3078: warning: Function parameter or member 'fmt' not described in 'trace_vbprintk' kernel/trace/trace.c:3078: warning: Function parameter or member 'args' not described in 'trace_vbprintk' Link: http://lkml.kernel.org/r/20190828052549.2472-2-jakub.kicinski@netronome.com Signed-off-by: Jakub Kicinski Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 525a97fbbc60..563e80f9006a 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1567,9 +1567,9 @@ update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu, /** * update_max_tr_single - only copy one trace over, and reset the rest - * @tr - tracer - * @tsk - task with the latency - * @cpu - the cpu of the buffer to copy. + * @tr: tracer + * @tsk: task with the latency + * @cpu: the cpu of the buffer to copy. * * Flip the trace of a single CPU buffer between the @tr and the max_tr. */ @@ -1767,7 +1767,7 @@ static void __init apply_trace_boot_options(void); /** * register_tracer - register a tracer with the ftrace system. - * @type - the plugin for the tracer + * @type: the plugin for the tracer * * Register a new plugin tracer. */ @@ -2230,9 +2230,9 @@ static bool tracing_record_taskinfo_skip(int flags) /** * tracing_record_taskinfo - record the task info of a task * - * @task - task to record - * @flags - TRACE_RECORD_CMDLINE for recording comm - * - TRACE_RECORD_TGID for recording tgid + * @task: task to record + * @flags: TRACE_RECORD_CMDLINE for recording comm + * TRACE_RECORD_TGID for recording tgid */ void tracing_record_taskinfo(struct task_struct *task, int flags) { @@ -2258,10 +2258,10 @@ void tracing_record_taskinfo(struct task_struct *task, int flags) /** * tracing_record_taskinfo_sched_switch - record task info for sched_switch * - * @prev - previous task during sched_switch - * @next - next task during sched_switch - * @flags - TRACE_RECORD_CMDLINE for recording comm - * TRACE_RECORD_TGID for recording tgid + * @prev: previous task during sched_switch + * @next: next task during sched_switch + * @flags: TRACE_RECORD_CMDLINE for recording comm + * TRACE_RECORD_TGID for recording tgid */ void tracing_record_taskinfo_sched_switch(struct task_struct *prev, struct task_struct *next, int flags) @@ -3072,7 +3072,9 @@ static void trace_printk_start_stop_comm(int enabled) /** * trace_vbprintk - write binary msg to tracing buffer - * + * @ip: The address of the caller + * @fmt: The string format to write to the buffer + * @args: Arguments for @fmt */ int trace_vbprintk(unsigned long ip, const char *fmt, va_list args) { -- cgit v1.2.3 From adb8049097a9ec4acd09fbd3aa8636199a78df8a Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sun, 16 Sep 2018 16:05:53 +0100 Subject: tools/power x86_energy_perf_policy: Fix "uninitialized variable" warnings at -O2 x86_energy_perf_policy first uses __get_cpuid() to check the maximum CPUID level and exits if it is too low. It then assumes that later calls will succeed (which I think is architecturally guaranteed). It also assumes that CPUID works at all (which is not guaranteed on x86_32). If optimisations are enabled, gcc warns about potentially uninitialized variables. Fix this by adding an exit-on-error after every call to __get_cpuid() instead of just checking the maximum level. Signed-off-by: Ben Hutchings Signed-off-by: Len Brown --- .../x86_energy_perf_policy.c | 26 +++++++++++++--------- 1 file changed, 15 insertions(+), 11 deletions(-) diff --git a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c index 34a796b303fe..7663abef51e9 100644 --- a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c +++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c @@ -1259,6 +1259,15 @@ void probe_dev_msr(void) if (system("/sbin/modprobe msr > /dev/null 2>&1")) err(-5, "no /dev/cpu/0/msr, Try \"# modprobe msr\" "); } + +static void get_cpuid_or_exit(unsigned int leaf, + unsigned int *eax, unsigned int *ebx, + unsigned int *ecx, unsigned int *edx) +{ + if (!__get_cpuid(leaf, eax, ebx, ecx, edx)) + errx(1, "Processor not supported\n"); +} + /* * early_cpuid() * initialize turbo_is_enabled, has_hwp, has_epb @@ -1266,15 +1275,10 @@ void probe_dev_msr(void) */ void early_cpuid(void) { - unsigned int eax, ebx, ecx, edx, max_level; + unsigned int eax, ebx, ecx, edx; unsigned int fms, family, model; - __get_cpuid(0, &max_level, &ebx, &ecx, &edx); - - if (max_level < 6) - errx(1, "Processor not supported\n"); - - __get_cpuid(1, &fms, &ebx, &ecx, &edx); + get_cpuid_or_exit(1, &fms, &ebx, &ecx, &edx); family = (fms >> 8) & 0xf; model = (fms >> 4) & 0xf; if (family == 6 || family == 0xf) @@ -1288,7 +1292,7 @@ void early_cpuid(void) bdx_highest_ratio = msr & 0xFF; } - __get_cpuid(0x6, &eax, &ebx, &ecx, &edx); + get_cpuid_or_exit(0x6, &eax, &ebx, &ecx, &edx); turbo_is_enabled = (eax >> 1) & 1; has_hwp = (eax >> 7) & 1; has_epb = (ecx >> 3) & 1; @@ -1306,7 +1310,7 @@ void parse_cpuid(void) eax = ebx = ecx = edx = 0; - __get_cpuid(0, &max_level, &ebx, &ecx, &edx); + get_cpuid_or_exit(0, &max_level, &ebx, &ecx, &edx); if (ebx == 0x756e6547 && edx == 0x49656e69 && ecx == 0x6c65746e) genuine_intel = 1; @@ -1315,7 +1319,7 @@ void parse_cpuid(void) fprintf(stderr, "CPUID(0): %.4s%.4s%.4s ", (char *)&ebx, (char *)&edx, (char *)&ecx); - __get_cpuid(1, &fms, &ebx, &ecx, &edx); + get_cpuid_or_exit(1, &fms, &ebx, &ecx, &edx); family = (fms >> 8) & 0xf; model = (fms >> 4) & 0xf; stepping = fms & 0xf; @@ -1340,7 +1344,7 @@ void parse_cpuid(void) errx(1, "CPUID: no MSR"); - __get_cpuid(0x6, &eax, &ebx, &ecx, &edx); + get_cpuid_or_exit(0x6, &eax, &ebx, &ecx, &edx); /* turbo_is_enabled already set */ /* has_hwp already set */ has_hwp_notify = eax & (1 << 8); -- cgit v1.2.3 From 6ac1730f7db86f0a92d4de0f2b4ca9cd124080fe Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sun, 16 Sep 2018 16:06:10 +0100 Subject: tools/power/x86: Enable compiler optimisations and Fortify by default Compiling without optimisations is silly, especially since some warnings depend on the optimiser. Use -O2. Fortify adds warnings for unchecked I/O (among other things), which seems to be a good idea for user-space code. Enable that too. Signed-off-by: Ben Hutchings Signed-off-by: Len Brown --- tools/power/x86/turbostat/Makefile | 3 ++- tools/power/x86/x86_energy_perf_policy/Makefile | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/power/x86/turbostat/Makefile b/tools/power/x86/turbostat/Makefile index 045f5f7d68ab..13f1e8b9ac52 100644 --- a/tools/power/x86/turbostat/Makefile +++ b/tools/power/x86/turbostat/Makefile @@ -9,9 +9,10 @@ ifeq ("$(origin O)", "command line") endif turbostat : turbostat.c -override CFLAGS += -Wall -I../../../include +override CFLAGS += -O2 -Wall -I../../../include override CFLAGS += -DMSRHEADER='"../../../../arch/x86/include/asm/msr-index.h"' override CFLAGS += -DINTEL_FAMILY_HEADER='"../../../../arch/x86/include/asm/intel-family.h"' +override CFLAGS += -D_FORTIFY_SOURCE=2 %: %.c @mkdir -p $(BUILD_OUTPUT) diff --git a/tools/power/x86/x86_energy_perf_policy/Makefile b/tools/power/x86/x86_energy_perf_policy/Makefile index 1fdeef864e7c..666b325a62a2 100644 --- a/tools/power/x86/x86_energy_perf_policy/Makefile +++ b/tools/power/x86/x86_energy_perf_policy/Makefile @@ -9,8 +9,9 @@ ifeq ("$(origin O)", "command line") endif x86_energy_perf_policy : x86_energy_perf_policy.c -override CFLAGS += -Wall -I../../../include +override CFLAGS += -O2 -Wall -I../../../include override CFLAGS += -DMSRHEADER='"../../../../arch/x86/include/asm/msr-index.h"' +override CFLAGS += -D_FORTIFY_SOURCE=2 %: %.c @mkdir -p $(BUILD_OUTPUT) -- cgit v1.2.3 From f3fe116a44fd02bc65dd312969697d06ca86b730 Mon Sep 17 00:00:00 2001 From: Matt Lupfer Date: Thu, 20 Sep 2018 10:31:44 -0400 Subject: tools/power: Fix typo in man page From context, we mean EPB (Enegry Performance Bias). Signed-off-by: Matt Lupfer Signed-off-by: Len Brown --- tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8 b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8 index 17db1c3af4d0..78c6361898b1 100644 --- a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8 +++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8 @@ -40,7 +40,7 @@ in the same processor package. Hardware P-States (HWP) are effectively an expansion of hardware P-state control from the opportunistic turbo-mode P-state range to include the entire range of available P-states. -On Broadwell Xeon, the initial HWP implementation, EBP influenced HWP. +On Broadwell Xeon, the initial HWP implementation, EPB influenced HWP. That influence was removed in subsequent generations, where it was moved to the Energy_Performance_Preference (EPP) field in -- cgit v1.2.3 From 03531482402a2bc4ab93cf6dde46833775e035e9 Mon Sep 17 00:00:00 2001 From: "Zephaniah E. Loss-Cutler-Hull" Date: Sat, 9 Feb 2019 05:25:48 -0800 Subject: tools/power x86_energy_perf_policy: Fix argument parsing The -w argument in x86_energy_perf_policy currently triggers an unconditional segfault. This is because the argument string reads: "+a:c:dD:E:e:f:m:M:rt:u:vw" and yet the argument handler expects an argument. When parse_optarg_string is called with a null argument, we then proceed to crash in strncmp, not horribly friendly. The man page describes -w as taking an argument, the long form (--hwp-window) is correctly marked as taking a required argument, and the code expects it. As such, this patch simply marks the short form (-w) as requiring an argument. Signed-off-by: Zephaniah E. Loss-Cutler-Hull Signed-off-by: Len Brown --- tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c index 7663abef51e9..3fe1eed900d4 100644 --- a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c +++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c @@ -545,7 +545,7 @@ void cmdline(int argc, char **argv) progname = argv[0]; - while ((opt = getopt_long_only(argc, argv, "+a:c:dD:E:e:f:m:M:rt:u:vw", + while ((opt = getopt_long_only(argc, argv, "+a:c:dD:E:e:f:m:M:rt:u:vw:", long_options, &option_index)) != -1) { switch (opt) { case 'a': -- cgit v1.2.3 From d743dae6d1936160366a32f3400f03db1da9421b Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sat, 31 Aug 2019 12:30:24 -0400 Subject: tools/power turbostat: remove duplicate pc10 column Remove the duplicate pc10 column. Fixes: be0e54c4ebbf ("turbostat: Build-in "Low Power Idle" counters support") Reported-by: Naoya Horiguchi Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 75fc4fb9901c..90f7e8b4d4d4 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -849,7 +849,6 @@ int dump_counters(struct thread_data *t, struct core_data *c, outp += sprintf(outp, "pc8: %016llX\n", p->pc8); outp += sprintf(outp, "pc9: %016llX\n", p->pc9); outp += sprintf(outp, "pc10: %016llX\n", p->pc10); - outp += sprintf(outp, "pc10: %016llX\n", p->pc10); outp += sprintf(outp, "cpu_lpi: %016llX\n", p->cpu_lpi); outp += sprintf(outp, "sys_lpi: %016llX\n", p->sys_lpi); outp += sprintf(outp, "Joules PKG: %0X\n", p->energy_pkg); -- cgit v1.2.3 From d4794f25f122aa1a8a073be51112edaa723ffff4 Mon Sep 17 00:00:00 2001 From: Yazen Ghannam Date: Mon, 25 Mar 2019 17:32:42 +0000 Subject: tools/power turbostat: Make interval calculation per thread to reduce jitter Turbostat currently normalizes TSC and other values by dividing by an interval. This interval is the delta between the start of one global (all counters on all CPUs) sampling and the start of another. However, this introduces a lot of jitter into the data. In order to reduce jitter, the interval calculation should be based on timestamps taken per thread and close to the start of the thread's sampling. Define a per thread time value to hold the delta between samples taken on the thread. Use the timestamp taken at the beginning of sampling to calculate the delta. Move the thread's beginning timestamp to after the CPU migration to avoid jitter due to the migration. Use the global time delta for the average time delta. Signed-off-by: Yazen Ghannam Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 90f7e8b4d4d4..02813a2a8ffd 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -166,6 +166,7 @@ size_t cpu_present_setsize, cpu_affinity_setsize, cpu_subset_size; struct thread_data { struct timeval tv_begin; struct timeval tv_end; + struct timeval tv_delta; unsigned long long tsc; unsigned long long aperf; unsigned long long mperf; @@ -910,7 +911,7 @@ int format_counters(struct thread_data *t, struct core_data *c, if (DO_BIC(BIC_TOD)) outp += sprintf(outp, "%10ld.%06ld\t", t->tv_end.tv_sec, t->tv_end.tv_usec); - interval_float = tv_delta.tv_sec + tv_delta.tv_usec/1000000.0; + interval_float = t->tv_delta.tv_sec + t->tv_delta.tv_usec/1000000.0; tsc = t->tsc * tsc_tweak; @@ -1308,6 +1309,7 @@ delta_thread(struct thread_data *new, struct thread_data *old, * over-write old w/ new so we can print end of interval values */ + timersub(&new->tv_begin, &old->tv_begin, &old->tv_delta); old->tv_begin = new->tv_begin; old->tv_end = new->tv_end; @@ -1403,6 +1405,8 @@ void clear_counters(struct thread_data *t, struct core_data *c, struct pkg_data t->tv_begin.tv_usec = 0; t->tv_end.tv_sec = 0; t->tv_end.tv_usec = 0; + t->tv_delta.tv_sec = 0; + t->tv_delta.tv_usec = 0; t->tsc = 0; t->aperf = 0; @@ -1572,6 +1576,9 @@ void compute_average(struct thread_data *t, struct core_data *c, for_all_cpus(sum_counters, t, c, p); + /* Use the global time delta for the average. */ + average.threads.tv_delta = tv_delta; + average.threads.tsc /= topo.num_cpus; average.threads.aperf /= topo.num_cpus; average.threads.mperf /= topo.num_cpus; @@ -1761,13 +1768,13 @@ int get_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p) struct msr_counter *mp; int i; - gettimeofday(&t->tv_begin, (struct timezone *)NULL); - if (cpu_migrate(cpu)) { fprintf(outf, "Could not migrate to CPU %d\n", cpu); return -1; } + gettimeofday(&t->tv_begin, (struct timezone *)NULL); + if (first_counter_read) get_apic_id(t); retry: -- cgit v1.2.3 From 15423b958f33132152e209e98df0dedc7a78f22c Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 8 Apr 2019 10:00:44 +0100 Subject: tools/power turbostat: fix leak of file descriptor on error return path Currently the error return path does not close the file fp and leaks a file descriptor. Fix this by closing the file. Fixes: 5ea7647b333f ("tools/power turbostat: Warn on bad ACPI LPIT data") Signed-off-by: Colin Ian King Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 02813a2a8ffd..41cf1206273c 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -2944,6 +2944,7 @@ int snapshot_sys_lpi_us(void) if (retval != 1) { fprintf(stderr, "Disabling Low Power Idle System output\n"); BIC_NOT_PRESENT(BIC_SYS_LPI); + fclose(fp); return -1; } fclose(fp); -- cgit v1.2.3 From 605736c6929d541c78a85dffae4d33a23b6b2149 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 8 Apr 2019 11:12:40 -0500 Subject: tools/power turbostat: fix file descriptor leaks Fix file descriptor leaks by closing fp before return. Addresses-Coverity-ID: 1444591 ("Resource leak") Addresses-Coverity-ID: 1444592 ("Resource leak") Fixes: 5ea7647b333f ("tools/power turbostat: Warn on bad ACPI LPIT data") Signed-off-by: Gustavo A. R. Silva Reviewed-by: Prarit Bhargava Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 41cf1206273c..2fb5c155289b 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -2918,6 +2918,7 @@ int snapshot_cpu_lpi_us(void) if (retval != 1) { fprintf(stderr, "Disabling Low Power Idle CPU output\n"); BIC_NOT_PRESENT(BIC_CPU_LPI); + fclose(fp); return -1; } -- cgit v1.2.3 From eeb71c950bc6eee460f2070643ce137e067b234c Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Wed, 3 Apr 2019 16:02:14 +0900 Subject: tools/power turbostat: fix buffer overrun turbostat could be terminated by general protection fault on some latest hardwares which (for example) support 9 levels of C-states and show 18 "tADDED" lines. That bloats the total output and finally causes buffer overrun. So let's extend the buffer to avoid this. Signed-off-by: Naoya Horiguchi Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 2fb5c155289b..f8f4e1c130a6 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -5131,7 +5131,7 @@ int initialize_counters(int cpu_id) void allocate_output_buffer() { - output_buffer = calloc(1, (1 + topo.num_cpus) * 1024); + output_buffer = calloc(1, (1 + topo.num_cpus) * 2048); outp = output_buffer; if (outp == NULL) err(-1, "calloc output buffer"); -- cgit v1.2.3 From b62b3184576b8f87ca655dd9bfd1ae02fd4e50a5 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 21 Apr 2019 16:30:22 +0800 Subject: tools/power turbostat: add Jacobsville support Jacobsville behaves like Denverton. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index f8f4e1c130a6..35f4366a522e 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -4591,6 +4591,9 @@ unsigned int intel_model_duplicates(unsigned int model) case INTEL_FAM6_ICELAKE_MOBILE: return INTEL_FAM6_CANNONLAKE_MOBILE; + + case INTEL_FAM6_ATOM_TREMONT_X: + return INTEL_FAM6_ATOM_GOLDMONT_X; } return model; } -- cgit v1.2.3 From cd188af5282d9f9e65f63915b13239bafc746f8d Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sat, 31 Aug 2019 14:09:29 -0400 Subject: tools/power turbostat: Fix Haswell Core systems turbostat: cpu0: msr offset 0x630 read failed: Input/output error because Haswell Core does not have C8-C10. Output C8-C10 only on Haswell ULT. Fixes: f5a4c76ad7de ("tools/power turbostat: consolidate duplicate model numbers") Reported-by: Prarit Bhargava Suggested-by: Kosuke Tatsukawa Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 35f4366a522e..78e7c94b94bf 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -3217,6 +3217,7 @@ int probe_nhm_msrs(unsigned int family, unsigned int model) break; case INTEL_FAM6_HASWELL_CORE: /* HSW */ case INTEL_FAM6_HASWELL_X: /* HSX */ + case INTEL_FAM6_HASWELL_ULT: /* HSW */ case INTEL_FAM6_HASWELL_GT3E: /* HSW */ case INTEL_FAM6_BROADWELL_CORE: /* BDW */ case INTEL_FAM6_BROADWELL_GT3E: /* BDW */ @@ -3413,6 +3414,7 @@ int has_config_tdp(unsigned int family, unsigned int model) case INTEL_FAM6_IVYBRIDGE: /* IVB */ case INTEL_FAM6_HASWELL_CORE: /* HSW */ case INTEL_FAM6_HASWELL_X: /* HSX */ + case INTEL_FAM6_HASWELL_ULT: /* HSW */ case INTEL_FAM6_HASWELL_GT3E: /* HSW */ case INTEL_FAM6_BROADWELL_CORE: /* BDW */ case INTEL_FAM6_BROADWELL_GT3E: /* BDW */ @@ -3849,6 +3851,7 @@ void rapl_probe_intel(unsigned int family, unsigned int model) case INTEL_FAM6_SANDYBRIDGE: case INTEL_FAM6_IVYBRIDGE: case INTEL_FAM6_HASWELL_CORE: /* HSW */ + case INTEL_FAM6_HASWELL_ULT: /* HSW */ case INTEL_FAM6_HASWELL_GT3E: /* HSW */ case INTEL_FAM6_BROADWELL_CORE: /* BDW */ case INTEL_FAM6_BROADWELL_GT3E: /* BDW */ @@ -4040,6 +4043,7 @@ void perf_limit_reasons_probe(unsigned int family, unsigned int model) switch (model) { case INTEL_FAM6_HASWELL_CORE: /* HSW */ + case INTEL_FAM6_HASWELL_ULT: /* HSW */ case INTEL_FAM6_HASWELL_GT3E: /* HSW */ do_gfx_perf_limit_reasons = 1; case INTEL_FAM6_HASWELL_X: /* HSX */ @@ -4259,6 +4263,7 @@ int has_snb_msrs(unsigned int family, unsigned int model) case INTEL_FAM6_IVYBRIDGE_X: /* IVB Xeon */ case INTEL_FAM6_HASWELL_CORE: /* HSW */ case INTEL_FAM6_HASWELL_X: /* HSW */ + case INTEL_FAM6_HASWELL_ULT: /* HSW */ case INTEL_FAM6_HASWELL_GT3E: /* HSW */ case INTEL_FAM6_BROADWELL_CORE: /* BDW */ case INTEL_FAM6_BROADWELL_GT3E: /* BDW */ @@ -4292,7 +4297,7 @@ int has_hsw_msrs(unsigned int family, unsigned int model) return 0; switch (model) { - case INTEL_FAM6_HASWELL_CORE: + case INTEL_FAM6_HASWELL_ULT: /* HSW */ case INTEL_FAM6_BROADWELL_CORE: /* BDW */ case INTEL_FAM6_SKYLAKE_MOBILE: /* SKL */ case INTEL_FAM6_CANNONLAKE_MOBILE: /* CNL */ @@ -4576,9 +4581,6 @@ unsigned int intel_model_duplicates(unsigned int model) case INTEL_FAM6_XEON_PHI_KNM: return INTEL_FAM6_XEON_PHI_KNL; - case INTEL_FAM6_HASWELL_ULT: - return INTEL_FAM6_HASWELL_CORE; - case INTEL_FAM6_BROADWELL_X: case INTEL_FAM6_BROADWELL_XEON_D: /* BDX-DE */ return INTEL_FAM6_BROADWELL_X; -- cgit v1.2.3 From 570992fc5733b5e1b00a4bdb9272df1e25d63972 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sat, 31 Aug 2019 14:16:07 -0400 Subject: tools/power turbostat: rename has_hsw_msrs() Perhaps if this more descriptive name had been used, then we wouldn't have had the HSW ULT vs HSW CORE bug, fixed by the previous commit. Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 78e7c94b94bf..51c739043214 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -4280,7 +4280,7 @@ int has_snb_msrs(unsigned int family, unsigned int model) } /* - * HSW adds support for additional MSRs: + * HSW ULT added support for C8/C9/C10 MSRs: * * MSR_PKG_C8_RESIDENCY 0x00000630 * MSR_PKG_C9_RESIDENCY 0x00000631 @@ -4291,7 +4291,7 @@ int has_snb_msrs(unsigned int family, unsigned int model) * MSR_PKGC10_IRTL 0x00000635 * */ -int has_hsw_msrs(unsigned int family, unsigned int model) +int has_c8910_msrs(unsigned int family, unsigned int model) { if (!genuine_intel) return 0; @@ -4833,12 +4833,12 @@ void process_cpuid() BIC_NOT_PRESENT(BIC_CPU_c7); BIC_NOT_PRESENT(BIC_Pkgpc7); } - if (has_hsw_msrs(family, model)) { + if (has_c8910_msrs(family, model)) { BIC_PRESENT(BIC_Pkgpc8); BIC_PRESENT(BIC_Pkgpc9); BIC_PRESENT(BIC_Pkgpc10); } - do_irtl_hsw = has_hsw_msrs(family, model); + do_irtl_hsw = has_c8910_msrs(family, model); if (has_skl_msrs(family, model)) { BIC_PRESENT(BIC_Totl_c0); BIC_PRESENT(BIC_Any_c0); -- cgit v1.2.3 From d93ea567fc4eec2d3581015e23d2c555f8b393ba Mon Sep 17 00:00:00 2001 From: Rajneesh Bhardwaj Date: Fri, 14 Jun 2019 13:09:46 +0530 Subject: tools/power turbostat: Add Ice Lake NNPI support This enables turbostat utility on Ice Lake NNPI SoC. Link: https://lkml.org/lkml/2019/6/5/1034 Signed-off-by: Rajneesh Bhardwaj Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 51c739043214..393509655449 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -4592,6 +4592,7 @@ unsigned int intel_model_duplicates(unsigned int model) return INTEL_FAM6_SKYLAKE_MOBILE; case INTEL_FAM6_ICELAKE_MOBILE: + case INTEL_FAM6_ICELAKE_NNPI: return INTEL_FAM6_CANNONLAKE_MOBILE; case INTEL_FAM6_ATOM_TREMONT_X: -- cgit v1.2.3 From c026c23629b825100fd4b8223227d9a395f9a56b Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 14 Aug 2019 20:12:55 +0300 Subject: tools/power turbostat: read from pipes too Commit '47936f944e78 tools/power turbostat: fix printing on input' make a valid fix, but it completely disabled piped stdin support, which is a valuable use-case. Indeed, if stdin is a pipe, turbostat won't read anything from it, so it becomes impossible to get turbostat output at user-defined moments, instead of the regular intervals. There is no reason why this should works for terminals, but not for pipes. This patch improves the situation. Instead of ignoring pipes, we read data from them but gracefully handle the EOF case. Signed-off-by: Artem Bityutskiy Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 393509655449..095bd52cc086 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -100,6 +100,7 @@ unsigned int has_hwp_epp; /* IA32_HWP_REQUEST[bits 31:24] */ unsigned int has_hwp_pkg; /* IA32_HWP_REQUEST_PKG */ unsigned int has_misc_feature_control; unsigned int first_counter_read = 1; +int ignore_stdin; #define RAPL_PKG (1 << 0) /* 0x610 MSR_PKG_POWER_LIMIT */ @@ -3013,26 +3014,37 @@ void setup_signal_handler(void) void do_sleep(void) { - struct timeval select_timeout; + struct timeval tout; + struct timespec rest; fd_set readfds; int retval; FD_ZERO(&readfds); FD_SET(0, &readfds); - if (!isatty(fileno(stdin))) { + if (ignore_stdin) { nanosleep(&interval_ts, NULL); return; } - select_timeout = interval_tv; - retval = select(1, &readfds, NULL, NULL, &select_timeout); + tout = interval_tv; + retval = select(1, &readfds, NULL, NULL, &tout); if (retval == 1) { switch (getc(stdin)) { case 'q': exit_requested = 1; break; + case EOF: + /* + * 'stdin' is a pipe closed on the other end. There + * won't be any further input. + */ + ignore_stdin = 1; + /* Sleep the rest of the time */ + rest.tv_sec = (tout.tv_sec + tout.tv_usec / 1000000); + rest.tv_nsec = (tout.tv_usec % 1000000) * 1000; + nanosleep(&rest, NULL); } /* make sure this manually-invoked interval is at least 1ms long */ nanosleep(&one_msec, NULL); -- cgit v1.2.3 From 6ee9fc63d2e7999f93a466e202ae3b557e9c739c Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 14 Aug 2019 20:12:56 +0300 Subject: tools/power turbostat: do not enforce 1ms Turbostat works by taking a snapshot of counters, sleeping, taking another snapshot, calculating deltas, and printing out the table. The sleep time is controlled via -i option or by user sending a signal or a character to stdin. In the latter case, turbostat always adds 1 ms sleep before it reads the counters, in order to avoid larger imprecisions in the results in prints. While the 1 ms delay may be a good idea for a "dumb" user, it is a problem for an "aware" user. I do thousands and thousands of measurements over a short period of time (like 2ms), and turbostat unconditionally adds a 1ms to my interval, so I cannot get what I really need. This patch removes the unconditional 1ms sleep. This is an expert user tool, after all, and non-experts will unlikely ever use it in the non-fixed interval mode anyway, so I think it is OK to remove the 1ms delay. Signed-off-by: Artem Bityutskiy Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 095bd52cc086..7d72268e546d 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -39,7 +39,6 @@ FILE *outf; int *fd_percpu; struct timeval interval_tv = {5, 0}; struct timespec interval_ts = {5, 0}; -struct timespec one_msec = {0, 1000000}; unsigned int num_iterations; unsigned int debug; unsigned int quiet; @@ -2994,8 +2993,6 @@ static void signal_handler (int signal) fprintf(stderr, "SIGUSR1\n"); break; } - /* make sure this manually-invoked interval is at least 1ms long */ - nanosleep(&one_msec, NULL); } void setup_signal_handler(void) @@ -3046,8 +3043,6 @@ void do_sleep(void) rest.tv_nsec = (tout.tv_usec % 1000000) * 1000; nanosleep(&rest, NULL); } - /* make sure this manually-invoked interval is at least 1ms long */ - nanosleep(&one_msec, NULL); } } -- cgit v1.2.3 From 1e9042b9c8d46ada9ee7b3339a31f50d12e5d291 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Tue, 27 Aug 2019 10:57:14 -0700 Subject: tools/power turbostat: Fix CPU%C1 display value In some case C1% will be wrong value, when platform doesn't have MSR for C1 residency. For example: Core CPU CPU%c1 - - 100.00 0 0 100.00 0 2 100.00 1 1 100.00 1 3 100.00 But adding Busy% will fix this Core CPU Busy% CPU%c1 - - 99.77 0.23 0 0 99.77 0.23 0 2 99.77 0.23 1 1 99.77 0.23 1 3 99.77 0.23 This issue can be reproduced on most of the recent systems including Broadwell, Skylake and later. This is because if we don't select Busy% or Avg_MHz or Bzy_MHz then mperf value will not be read from MSR, so it will be 0. But this is required for C1% calculation when MSR for C1 residency is not present. Same is true for C3, C6 and C7 column selection. So add another define DO_BIC_READ(), which doesn't depend on user column selection and use for mperf, C3, C6 and C7 related counters. So when there is no platform support for C1 residency counters, we still read these counters, if the CPU has support and user selected display of CPU%c1. Signed-off-by: Srinivas Pandruvada Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 7d72268e546d..f57c4023231e 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -507,6 +507,7 @@ unsigned long long bic_enabled = (0xFFFFFFFFFFFFFFFFULL & ~BIC_DISABLED_BY_DEFAU unsigned long long bic_present = BIC_USEC | BIC_TOD | BIC_sysfs | BIC_APIC | BIC_X2APIC; #define DO_BIC(COUNTER_NAME) (bic_enabled & bic_present & COUNTER_NAME) +#define DO_BIC_READ(COUNTER_NAME) (bic_present & COUNTER_NAME) #define ENABLE_BIC(COUNTER_NAME) (bic_enabled |= COUNTER_NAME) #define BIC_PRESENT(COUNTER_BIT) (bic_present |= COUNTER_BIT) #define BIC_NOT_PRESENT(COUNTER_BIT) (bic_present &= ~COUNTER_BIT) @@ -1287,6 +1288,14 @@ delta_core(struct core_data *new, struct core_data *old) } } +int soft_c1_residency_display(int bic) +{ + if (!DO_BIC(BIC_CPU_c1) || use_c1_residency_msr) + return 0; + + return DO_BIC_READ(bic); +} + /* * old = new - old */ @@ -1323,7 +1332,8 @@ delta_thread(struct thread_data *new, struct thread_data *old, old->c1 = new->c1 - old->c1; - if (DO_BIC(BIC_Avg_MHz) || DO_BIC(BIC_Busy) || DO_BIC(BIC_Bzy_MHz)) { + if (DO_BIC(BIC_Avg_MHz) || DO_BIC(BIC_Busy) || DO_BIC(BIC_Bzy_MHz) || + soft_c1_residency_display(BIC_Avg_MHz)) { if ((new->aperf > old->aperf) && (new->mperf > old->mperf)) { old->aperf = new->aperf - old->aperf; old->mperf = new->mperf - old->mperf; @@ -1780,7 +1790,8 @@ int get_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p) retry: t->tsc = rdtsc(); /* we are running on local CPU of interest */ - if (DO_BIC(BIC_Avg_MHz) || DO_BIC(BIC_Busy) || DO_BIC(BIC_Bzy_MHz)) { + if (DO_BIC(BIC_Avg_MHz) || DO_BIC(BIC_Busy) || DO_BIC(BIC_Bzy_MHz) || + soft_c1_residency_display(BIC_Avg_MHz)) { unsigned long long tsc_before, tsc_between, tsc_after, aperf_time, mperf_time; /* @@ -1857,20 +1868,20 @@ retry: if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) goto done; - if (DO_BIC(BIC_CPU_c3)) { + if (DO_BIC(BIC_CPU_c3) || soft_c1_residency_display(BIC_CPU_c3)) { if (get_msr(cpu, MSR_CORE_C3_RESIDENCY, &c->c3)) return -6; } - if (DO_BIC(BIC_CPU_c6) && !do_knl_cstates) { + if ((DO_BIC(BIC_CPU_c6) || soft_c1_residency_display(BIC_CPU_c6)) && !do_knl_cstates) { if (get_msr(cpu, MSR_CORE_C6_RESIDENCY, &c->c6)) return -7; - } else if (do_knl_cstates) { + } else if (do_knl_cstates || soft_c1_residency_display(BIC_CPU_c6)) { if (get_msr(cpu, MSR_KNL_CORE_C6_RESIDENCY, &c->c6)) return -7; } - if (DO_BIC(BIC_CPU_c7)) + if (DO_BIC(BIC_CPU_c7) || soft_c1_residency_display(BIC_CPU_c7)) if (get_msr(cpu, MSR_CORE_C7_RESIDENCY, &c->c7)) return -8; -- cgit v1.2.3 From 9cfa8e042f7cbb1994cc5923e46c78b36f6054f4 Mon Sep 17 00:00:00 2001 From: Pu Wen Date: Sat, 31 Aug 2019 10:19:58 +0800 Subject: tools/power turbostat: Fix caller parameter of get_tdp_amd() Commit 9392bd98bba760be96ee ("tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL") add a function get_tdp_amd(), the parameter is CPU family. But the rapl_probe_amd() function use wrong model parameter. Fix the wrong caller parameter of get_tdp_amd() to use family. Cc: # v5.1+ Signed-off-by: Pu Wen Reviewed-by: Calvin Walton Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index f57c4023231e..6cec6aa01241 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -4031,7 +4031,7 @@ void rapl_probe_amd(unsigned int family, unsigned int model) rapl_energy_units = ldexp(1.0, -(msr >> 8 & 0x1f)); rapl_power_units = ldexp(1.0, -(msr & 0xf)); - tdp = get_tdp_amd(model); + tdp = get_tdp_amd(family); rapl_joule_counter_range = 0xFFFFFFFF * rapl_energy_units / tdp; if (!quiet) -- cgit v1.2.3 From c1c10cc77883932abdb7b103687ecbb01e80bef9 Mon Sep 17 00:00:00 2001 From: Pu Wen Date: Sat, 31 Aug 2019 10:20:31 +0800 Subject: tools/power turbostat: Add support for Hygon Fam 18h (Dhyana) RAPL Commit 9392bd98bba760be96ee ("tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL") and the commit 3316f99a9f1b68c578c5 ("tools/power turbostat: Also read package power on AMD F17h (Zen)") add AMD Fam 17h RAPL support. Hygon Family 18h(Dhyana) support RAPL in bit 14 of CPUID 0x80000007 EDX, and has MSRs RAPL_PWR_UNIT/CORE_ENERGY_STAT/PKG_ENERGY_STAT. So add Hygon Dhyana Family 18h support for RAPL. Already tested on Hygon multi-node systems and it shows correct per-core energy usage and the total package power. Signed-off-by: Pu Wen Reviewed-by: Calvin Walton Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 6cec6aa01241..e8b6c608d6d1 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -59,6 +59,7 @@ unsigned int do_irtl_hsw; unsigned int units = 1000000; /* MHz etc */ unsigned int genuine_intel; unsigned int authentic_amd; +unsigned int hygon_genuine; unsigned int max_level, max_extended_level; unsigned int has_invariant_tsc; unsigned int do_nhm_platform_info; @@ -1730,7 +1731,7 @@ void get_apic_id(struct thread_data *t) if (!DO_BIC(BIC_X2APIC)) return; - if (authentic_amd) { + if (authentic_amd || hygon_genuine) { unsigned int topology_extensions; if (max_extended_level < 0x8000001e) @@ -3831,6 +3832,7 @@ double get_tdp_amd(unsigned int family) { switch (family) { case 0x17: + case 0x18: default: /* This is the max stock TDP of HEDT/Server Fam17h chips */ return 250.0; @@ -4011,6 +4013,7 @@ void rapl_probe_amd(unsigned int family, unsigned int model) switch (family) { case 0x17: /* Zen, Zen+ */ + case 0x18: /* Hygon Dhyana */ do_rapl = RAPL_AMD_F17H | RAPL_PER_CORE_ENERGY; if (rapl_joules) { BIC_PRESENT(BIC_Pkg_J); @@ -4047,7 +4050,7 @@ void rapl_probe(unsigned int family, unsigned int model) { if (genuine_intel) rapl_probe_intel(family, model); - if (authentic_amd) + if (authentic_amd || hygon_genuine) rapl_probe_amd(family, model); } @@ -4632,6 +4635,8 @@ void process_cpuid() genuine_intel = 1; else if (ebx == 0x68747541 && ecx == 0x444d4163 && edx == 0x69746e65) authentic_amd = 1; + else if (ebx == 0x6f677948 && ecx == 0x656e6975 && edx == 0x6e65476e) + hygon_genuine = 1; if (!quiet) fprintf(outf, "CPUID(0): %.4s%.4s%.4s ", -- cgit v1.2.3 From 9eb4b5180d33c827f16829644ae0cd7382ecdb82 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sat, 31 Aug 2019 14:40:39 -0400 Subject: tools/power turbostat: update version number Today is 19.08.31, at least in some parts of the world. Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index e8b6c608d6d1..b2a86438f074 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -5306,7 +5306,7 @@ int get_and_dump_counters(void) } void print_version() { - fprintf(outf, "turbostat version 19.03.20" + fprintf(outf, "turbostat version 19.08.31" " - Len Brown \n"); } -- cgit v1.2.3 From 5f81d5455589df2f580e634c2e9da55b80e63c30 Mon Sep 17 00:00:00 2001 From: George McCollister Date: Thu, 29 Aug 2019 09:14:41 -0500 Subject: net: dsa: microchip: fill regmap_config name Use the register value width as the regmap_config name to prevent the following error when the second and third regmap_configs are initialized. "debugfs: Directory '${bus-id}' with parent 'regmap' already present!" Signed-off-by: George McCollister Reviewed-by: Marek Vasut Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz_common.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index ee7096d8af07..72ec250b9540 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -128,6 +128,7 @@ static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset, #define KSZ_REGMAP_ENTRY(width, swp, regbits, regpad, regalign) \ { \ + .name = #width, \ .val_bits = (width), \ .reg_stride = (width) / 8, \ .reg_bits = (regbits) + (regalign), \ -- cgit v1.2.3 From efb55222d31c8c2af8b4ba42bb56b0b0beedf98e Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 30 Aug 2019 04:07:21 +0300 Subject: taprio: Fix kernel panic in taprio_destroy taprio_init may fail earlier than this line: list_add(&q->taprio_list, &taprio_list); i.e. due to the net device not being multi queue. Attempting to remove q from the global taprio_list when it is not part of it will result in a kernel panic. Fix it by matching list_add and list_del better to one another in the order of operations. This way we can keep the deletion unconditional and with lower complexity - O(1). Cc: Leandro Dorileo Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Vladimir Oltean Acked-by: Vinicius Costa Gomes Signed-off-by: David S. Miller --- net/sched/sch_taprio.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c index e25d414ae12f..8c85f61e98dd 100644 --- a/net/sched/sch_taprio.c +++ b/net/sched/sch_taprio.c @@ -1249,6 +1249,10 @@ static int taprio_init(struct Qdisc *sch, struct nlattr *opt, */ q->clockid = -1; + spin_lock(&taprio_list_lock); + list_add(&q->taprio_list, &taprio_list); + spin_unlock(&taprio_list_lock); + if (sch->parent != TC_H_ROOT) return -EOPNOTSUPP; @@ -1266,10 +1270,6 @@ static int taprio_init(struct Qdisc *sch, struct nlattr *opt, if (!opt) return -EINVAL; - spin_lock(&taprio_list_lock); - list_add(&q->taprio_list, &taprio_list); - spin_unlock(&taprio_list_lock); - for (i = 0; i < dev->num_tx_queues; i++) { struct netdev_queue *dev_queue; struct Qdisc *qdisc; -- cgit v1.2.3 From f04b514c0ce2f20aad757ebfb04e07b1a12d2b58 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 30 Aug 2019 04:07:22 +0300 Subject: taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte The taprio budget needs to be adapted at runtime according to interface link speed. But that handling is problematic. For one thing, installing a qdisc on an interface that doesn't have carrier is not illegal. But taprio prints the following stack trace: [ 31.851373] ------------[ cut here ]------------ [ 31.856024] WARNING: CPU: 1 PID: 207 at net/sched/sch_taprio.c:481 taprio_dequeue+0x1a8/0x2d4 [ 31.864566] taprio: dequeue() called with unknown picos per byte. [ 31.864570] Modules linked in: [ 31.873701] CPU: 1 PID: 207 Comm: tc Not tainted 5.3.0-rc5-01199-g8838fe023cd6 #1689 [ 31.881398] Hardware name: Freescale LS1021A [ 31.885661] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 31.893368] [] (show_stack) from [] (dump_stack+0xb4/0xc8) [ 31.900555] [] (dump_stack) from [] (__warn+0xe0/0xf8) [ 31.907395] [] (__warn) from [] (warn_slowpath_fmt+0x48/0x6c) [ 31.914841] [] (warn_slowpath_fmt) from [] (taprio_dequeue+0x1a8/0x2d4) [ 31.923150] [] (taprio_dequeue) from [] (__qdisc_run+0x90/0x61c) [ 31.930856] [] (__qdisc_run) from [] (net_tx_action+0x12c/0x2bc) [ 31.938560] [] (net_tx_action) from [] (__do_softirq+0x130/0x3c8) [ 31.946350] [] (__do_softirq) from [] (irq_exit+0xbc/0xd8) [ 31.953536] [] (irq_exit) from [] (__handle_domain_irq+0x60/0xb4) [ 31.961328] [] (__handle_domain_irq) from [] (gic_handle_irq+0x58/0x9c) [ 31.969638] [] (gic_handle_irq) from [] (__irq_svc+0x6c/0x90) [ 31.977076] Exception stack(0xe8167b20 to 0xe8167b68) [ 31.982100] 7b20: e9d4bd80 00000cc0 000000cf 00000000 e9d4bd80 c1f38958 00000cc0 c1f38960 [ 31.990234] 7b40: 00000001 000000cf 00000004 e9dc0800 00000000 e8167b70 c0f478ec c0f46d94 [ 31.998363] 7b60: 60070013 ffffffff [ 32.001833] [] (__irq_svc) from [] (netlink_trim+0x18/0xd8) [ 32.009104] [] (netlink_trim) from [] (netlink_broadcast_filtered+0x34/0x414) [ 32.017930] [] (netlink_broadcast_filtered) from [] (netlink_broadcast+0x20/0x28) [ 32.027102] [] (netlink_broadcast) from [] (rtnetlink_send+0x34/0x88) [ 32.035238] [] (rtnetlink_send) from [] (notify_and_destroy+0x2c/0x44) [ 32.043461] [] (notify_and_destroy) from [] (qdisc_graft+0x398/0x470) [ 32.051595] [] (qdisc_graft) from [] (tc_modify_qdisc+0x3a4/0x724) [ 32.059470] [] (tc_modify_qdisc) from [] (rtnetlink_rcv_msg+0x260/0x2ec) [ 32.067864] [] (rtnetlink_rcv_msg) from [] (netlink_rcv_skb+0xb8/0x110) [ 32.076172] [] (netlink_rcv_skb) from [] (netlink_unicast+0x1b4/0x22c) [ 32.084392] [] (netlink_unicast) from [] (netlink_sendmsg+0x33c/0x380) [ 32.092614] [] (netlink_sendmsg) from [] (sock_sendmsg+0x14/0x24) [ 32.100403] [] (sock_sendmsg) from [] (___sys_sendmsg+0x214/0x228) [ 32.108279] [] (___sys_sendmsg) from [] (__sys_sendmsg+0x50/0x8c) [ 32.116068] [] (__sys_sendmsg) from [] (ret_fast_syscall+0x0/0x54) [ 32.123938] Exception stack(0xe8167fa8 to 0xe8167ff0) [ 32.128960] 7fa0: b6fa68c8 000000f8 00000003 bea142d0 00000000 00000000 [ 32.137093] 7fc0: b6fa68c8 000000f8 0052154c 00000128 5d6468a2 00000000 00000028 00558c9c [ 32.145224] 7fe0: 00000070 bea14278 00530d64 b6e17e64 [ 32.150659] ---[ end trace 2139c9827c3e5177 ]--- This happens because the qdisc ->dequeue callback gets called. Which again is not illegal, the qdisc will dequeue even when the interface is up but doesn't have carrier (and hence SPEED_UNKNOWN), and the frames will be dropped further down the stack in dev_direct_xmit(). And, at the end of the day, for what? For calculating the initial budget of an interface which is non-operational at the moment and where frames will get dropped anyway. So if we can't figure out the link speed, default to SPEED_10 and move along. We can also remove the runtime check now. Cc: Leandro Dorileo Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Acked-by: Vinicius Costa Gomes Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- net/sched/sch_taprio.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c index 8c85f61e98dd..8d8bc2ec5cd6 100644 --- a/net/sched/sch_taprio.c +++ b/net/sched/sch_taprio.c @@ -477,11 +477,6 @@ static struct sk_buff *taprio_dequeue(struct Qdisc *sch) u32 gate_mask; int i; - if (atomic64_read(&q->picos_per_byte) == -1) { - WARN_ONCE(1, "taprio: dequeue() called with unknown picos per byte."); - return NULL; - } - rcu_read_lock(); entry = rcu_dereference(q->current_entry); /* if there's no entry, it means that the schedule didn't @@ -958,12 +953,20 @@ static void taprio_set_picos_per_byte(struct net_device *dev, struct taprio_sched *q) { struct ethtool_link_ksettings ecmd; - int picos_per_byte = -1; + int speed = SPEED_10; + int picos_per_byte; + int err; + + err = __ethtool_get_link_ksettings(dev, &ecmd); + if (err < 0) + goto skip; + + if (ecmd.base.speed != SPEED_UNKNOWN) + speed = ecmd.base.speed; - if (!__ethtool_get_link_ksettings(dev, &ecmd) && - ecmd.base.speed != SPEED_UNKNOWN) - picos_per_byte = div64_s64(NSEC_PER_SEC * 1000LL * 8, - ecmd.base.speed * 1000 * 1000); +skip: + picos_per_byte = div64_s64(NSEC_PER_SEC * 1000LL * 8, + speed * 1000 * 1000); atomic64_set(&q->picos_per_byte, picos_per_byte); netdev_dbg(dev, "taprio: set %s's picos_per_byte to: %lld, linkspeed: %d\n", -- cgit v1.2.3 From 1c6c09a0ae62fa3ea8f8ead2ac3920e6fff2de64 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 30 Aug 2019 04:07:23 +0300 Subject: net/sched: cbs: Set default link speed to 10 Mbps in cbs_set_port_rate The discussion to be made is absolutely the same as in the case of previous patch ("taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte"). Nothing is lost when setting a default. Cc: Leandro Dorileo Fixes: e0a7683d30e9 ("net/sched: cbs: fix port_rate miscalculation") Acked-by: Vinicius Costa Gomes Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- net/sched/sch_cbs.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/net/sched/sch_cbs.c b/net/sched/sch_cbs.c index 732e109c3055..810645b5c086 100644 --- a/net/sched/sch_cbs.c +++ b/net/sched/sch_cbs.c @@ -181,11 +181,6 @@ static struct sk_buff *cbs_dequeue_soft(struct Qdisc *sch) s64 credits; int len; - if (atomic64_read(&q->port_rate) == -1) { - WARN_ONCE(1, "cbs: dequeue() called with unknown port rate."); - return NULL; - } - if (q->credits < 0) { credits = timediff_to_credits(now - q->last, q->idleslope); @@ -303,11 +298,19 @@ static int cbs_enable_offload(struct net_device *dev, struct cbs_sched_data *q, static void cbs_set_port_rate(struct net_device *dev, struct cbs_sched_data *q) { struct ethtool_link_ksettings ecmd; + int speed = SPEED_10; int port_rate = -1; + int err; + + err = __ethtool_get_link_ksettings(dev, &ecmd); + if (err < 0) + goto skip; + + if (ecmd.base.speed != SPEED_UNKNOWN) + speed = ecmd.base.speed; - if (!__ethtool_get_link_ksettings(dev, &ecmd) && - ecmd.base.speed != SPEED_UNKNOWN) - port_rate = ecmd.base.speed * 1000 * BYTES_PER_KBIT; +skip: + port_rate = speed * 1000 * BYTES_PER_KBIT; atomic64_set(&q->port_rate, port_rate); netdev_dbg(dev, "cbs: set %s's port_rate to: %lld, linkspeed: %d\n", -- cgit v1.2.3 From 6fdc060d7476ef73c8029b652d252c1a7b4de948 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Fri, 30 Aug 2019 12:08:30 +0000 Subject: net: aquantia: fix removal of vlan 0 Due to absence of checking against the rx flow rule when vlan 0 is being removed, the other rule could be removed instead of the rule with vlan 0 Fixes: 7975d2aff5afb ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_filters.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_filters.c b/drivers/net/ethernet/aquantia/atlantic/aq_filters.c index 440690b18734..b13704544a23 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_filters.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_filters.c @@ -431,7 +431,8 @@ int aq_del_fvlan_by_vlan(struct aq_nic_s *aq_nic, u16 vlan_id) if (be16_to_cpu(rule->aq_fsp.h_ext.vlan_tci) == vlan_id) break; } - if (rule && be16_to_cpu(rule->aq_fsp.h_ext.vlan_tci) == vlan_id) { + if (rule && rule->type == aq_rx_filter_vlan && + be16_to_cpu(rule->aq_fsp.h_ext.vlan_tci) == vlan_id) { struct ethtool_rxnfc cmd; cmd.fs.location = rule->aq_fsp.location; -- cgit v1.2.3 From 392349f60110dc2c3daf86464fd926afc53d6143 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Fri, 30 Aug 2019 12:08:33 +0000 Subject: net: aquantia: fix limit of vlan filters Fix a limit condition of vlans on the interface before setting vlan promiscuous mode Fixes: 48dd73d08d4dd ("net: aquantia: fix vlans not working over bridged network") Signed-off-by: Dmitry Bogdanov Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_filters.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_filters.c b/drivers/net/ethernet/aquantia/atlantic/aq_filters.c index b13704544a23..aee827f07c16 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_filters.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_filters.c @@ -844,7 +844,7 @@ int aq_filters_vlans_update(struct aq_nic_s *aq_nic) return err; if (aq_nic->ndev->features & NETIF_F_HW_VLAN_CTAG_FILTER) { - if (hweight < AQ_VLAN_MAX_FILTERS && hweight > 0) { + if (hweight <= AQ_VLAN_MAX_FILTERS && hweight > 0) { err = aq_hw_ops->hw_filter_vlan_ctrl(aq_hw, !(aq_nic->packet_filter & IFF_PROMISC)); aq_nic->aq_nic_cfg.is_vlan_force_promisc = false; -- cgit v1.2.3 From c2ef057ee775e229d3138add59f937d93a3a59d8 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Fri, 30 Aug 2019 12:08:35 +0000 Subject: net: aquantia: reapply vlan filters on up In case of device reconfiguration the driver may reset the device invisible for other modules, vlan module in particular. So vlans will not be removed&created and vlan filters will not be configured in the device. The patch reapplies the vlan filters at device start. Fixes: 7975d2aff5afb ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_main.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_main.c b/drivers/net/ethernet/aquantia/atlantic/aq_main.c index 100722ad5c2d..b4a0fb281e69 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_main.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_main.c @@ -61,6 +61,10 @@ static int aq_ndev_open(struct net_device *ndev) if (err < 0) goto err_exit; + err = aq_filters_vlans_update(aq_nic); + if (err < 0) + goto err_exit; + err = aq_nic_start(aq_nic); if (err < 0) goto err_exit; -- cgit v1.2.3 From 5c47e3ba6fe52465603cf9d816b3371e6881d649 Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Fri, 30 Aug 2019 12:08:36 +0000 Subject: net: aquantia: linkstate irq should be oneshot Declaring threaded irq handler should also indicate the irq is oneshot. It is oneshot indeed, because HW implements irq automasking on trigger. Not declaring this causes some kernel configurations to fail on interface up, because request_threaded_irq returned an err code. The issue was originally hidden on normal x86_64 configuration with latest kernel, because depending on interrupt controller, irq driver added ONESHOT flag on its own. Issue was observed on older kernels (4.14) where no such logic exists. Fixes: 4c83f170b3ac ("net: aquantia: link status irq handling") Signed-off-by: Igor Russkikh Reported-by: Michael Symolkin Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index e1392766e21e..8f66e7817811 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -393,7 +393,7 @@ int aq_nic_start(struct aq_nic_s *self) self->aq_nic_cfg.link_irq_vec); err = request_threaded_irq(irqvec, NULL, aq_linkstate_threaded_isr, - IRQF_SHARED, + IRQF_SHARED | IRQF_ONESHOT, self->ndev->name, self); if (err < 0) goto err_exit; -- cgit v1.2.3 From be6cef69ba570ebb327eba1ef6438f7af49aaf86 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Fri, 30 Aug 2019 12:08:38 +0000 Subject: net: aquantia: fix out of memory condition on rx side On embedded environments with hard memory limits it is a normal although rare case when skb can't be allocated on rx part under high traffic. In such OOM cases napi_complete_done() was not called. So the napi object became in an invalid state like it is "scheduled". Kernel do not re-schedules the poll of that napi object. Consequently, kernel can not remove that object the system hangs on `ifconfig down` waiting for a poll. We are fixing this by gracefully closing napi poll routine with correct invocation of napi_complete_done. This was reproduced with artificially failing the allocation of skb to simulate an "out of memory" error case and check that traffic does not get stuck. Fixes: 970a2e9864b0 ("net: ethernet: aquantia: Vector operations") Signed-off-by: Igor Russkikh Signed-off-by: Dmitry Bogdanov Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_vec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_vec.c b/drivers/net/ethernet/aquantia/atlantic/aq_vec.c index 715685aa48c3..28892b8acd0e 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_vec.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_vec.c @@ -86,6 +86,7 @@ static int aq_vec_poll(struct napi_struct *napi, int budget) } } +err_exit: if (!was_tx_cleaned) work_done = budget; @@ -95,7 +96,7 @@ static int aq_vec_poll(struct napi_struct *napi, int budget) 1U << self->aq_ring_param.vec_idx); } } -err_exit: + return work_done; } -- cgit v1.2.3 From de5eb9e00eba00783f49da37377bd2a93d38fe42 Mon Sep 17 00:00:00 2001 From: Razvan Stefanescu Date: Fri, 30 Aug 2019 10:52:01 +0300 Subject: dt-bindings: net: dsa: document additional Microchip KSZ8563 switch It is a 3-Port 10/100 Ethernet Switch with 1588v2 PTP. Signed-off-by: Razvan Stefanescu Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/dsa/ksz.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt index 4ac21cef370e..113e7ac79aad 100644 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt @@ -12,6 +12,7 @@ Required properties: - "microchip,ksz8565" - "microchip,ksz9893" - "microchip,ksz9563" + - "microchip,ksz8563" Optional properties: -- cgit v1.2.3 From d9033ae95cf445150fcc5856ccf024f41f0bd0b9 Mon Sep 17 00:00:00 2001 From: Razvan Stefanescu Date: Fri, 30 Aug 2019 10:52:02 +0300 Subject: net: dsa: microchip: add KSZ8563 compatibility string It is a 3-Port 10/100 Ethernet Switch with 1588v2 PTP. Signed-off-by: Razvan Stefanescu Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz9477_spi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/dsa/microchip/ksz9477_spi.c b/drivers/net/dsa/microchip/ksz9477_spi.c index 5a9e27b337a8..098b01e4ed1a 100644 --- a/drivers/net/dsa/microchip/ksz9477_spi.c +++ b/drivers/net/dsa/microchip/ksz9477_spi.c @@ -81,6 +81,7 @@ static const struct of_device_id ksz9477_dt_ids[] = { { .compatible = "microchip,ksz9897" }, { .compatible = "microchip,ksz9893" }, { .compatible = "microchip,ksz9563" }, + { .compatible = "microchip,ksz8563" }, {}, }; MODULE_DEVICE_TABLE(of, ksz9477_dt_ids); -- cgit v1.2.3 From 02a3f0d5a70a865d55c4b7cb2e327cb30491f7fd Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Fri, 30 Aug 2019 18:51:47 +0200 Subject: tc-testing: don't hardcode 'ip' in nsPlugin.py the following tdc test fails on Fedora: # ./tdc.py -e 2638 -- ns/SubPlugin.__init__ Test 2638: Add matchall and try to get it -----> prepare stage *** Could not execute: "$TC qdisc add dev $DEV1 clsact" -----> prepare stage *** Error message: "/bin/sh: ip: command not found" returncode 127; expected [0] -----> prepare stage *** Aborting test run. Let nsPlugin.py use the 'IP' variable introduced with commit 92c1a19e2fb9 ("tc-tests: added path to ip command in tdc"), so that the path to 'ip' is correctly resolved to the value we have in tdc_config.py. # ./tdc.py -e 2638 -- ns/SubPlugin.__init__ Test 2638: Add matchall and try to get it All test results: 1..1 ok 1 2638 - Add matchall and try to get it Fixes: 489ce2f42514 ("tc-testing: Restore original behaviour for namespaces in tdc") Reported-by: Hangbin Liu Signed-off-by: Davide Caratti Acked-by: Nicolas Dichtel Signed-off-by: David S. Miller --- .../selftests/tc-testing/plugin-lib/nsPlugin.py | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/tools/testing/selftests/tc-testing/plugin-lib/nsPlugin.py b/tools/testing/selftests/tc-testing/plugin-lib/nsPlugin.py index affa7f2d9670..9539cffa9e5e 100644 --- a/tools/testing/selftests/tc-testing/plugin-lib/nsPlugin.py +++ b/tools/testing/selftests/tc-testing/plugin-lib/nsPlugin.py @@ -64,7 +64,7 @@ class SubPlugin(TdcPlugin): cmdlist.insert(0, self.args.NAMES['NS']) cmdlist.insert(0, 'exec') cmdlist.insert(0, 'netns') - cmdlist.insert(0, 'ip') + cmdlist.insert(0, self.args.NAMES['IP']) else: pass @@ -78,16 +78,16 @@ class SubPlugin(TdcPlugin): return command def _ports_create(self): - cmd = 'ip link add $DEV0 type veth peer name $DEV1' + cmd = '$IP link add $DEV0 type veth peer name $DEV1' self._exec_cmd('pre', cmd) - cmd = 'ip link set $DEV0 up' + cmd = '$IP link set $DEV0 up' self._exec_cmd('pre', cmd) if not self.args.namespace: - cmd = 'ip link set $DEV1 up' + cmd = '$IP link set $DEV1 up' self._exec_cmd('pre', cmd) def _ports_destroy(self): - cmd = 'ip link del $DEV0' + cmd = '$IP link del $DEV0' self._exec_cmd('post', cmd) def _ns_create(self): @@ -97,16 +97,16 @@ class SubPlugin(TdcPlugin): ''' self._ports_create() if self.args.namespace: - cmd = 'ip netns add {}'.format(self.args.NAMES['NS']) + cmd = '$IP netns add {}'.format(self.args.NAMES['NS']) self._exec_cmd('pre', cmd) - cmd = 'ip link set $DEV1 netns {}'.format(self.args.NAMES['NS']) + cmd = '$IP link set $DEV1 netns {}'.format(self.args.NAMES['NS']) self._exec_cmd('pre', cmd) - cmd = 'ip -n {} link set $DEV1 up'.format(self.args.NAMES['NS']) + cmd = '$IP -n {} link set $DEV1 up'.format(self.args.NAMES['NS']) self._exec_cmd('pre', cmd) if self.args.device: - cmd = 'ip link set $DEV2 netns {}'.format(self.args.NAMES['NS']) + cmd = '$IP link set $DEV2 netns {}'.format(self.args.NAMES['NS']) self._exec_cmd('pre', cmd) - cmd = 'ip -n {} link set $DEV2 up'.format(self.args.NAMES['NS']) + cmd = '$IP -n {} link set $DEV2 up'.format(self.args.NAMES['NS']) self._exec_cmd('pre', cmd) def _ns_destroy(self): @@ -115,7 +115,7 @@ class SubPlugin(TdcPlugin): devices as well) ''' if self.args.namespace: - cmd = 'ip netns delete {}'.format(self.args.NAMES['NS']) + cmd = '$IP netns delete {}'.format(self.args.NAMES['NS']) self._exec_cmd('post', cmd) def _exec_cmd(self, stage, command): -- cgit v1.2.3 From dd1bf47a84fe64edf50f6a83fdc164d0da6fa021 Mon Sep 17 00:00:00 2001 From: "Ryan M. Collins" Date: Fri, 30 Aug 2019 14:49:55 -0400 Subject: net: bcmgenet: use ethtool_op_get_ts_info() This change enables the use of SW timestamping on the Raspberry Pi 4. bcmgenet's transmit function bcmgenet_xmit() implements software timestamping. However the SOF_TIMESTAMPING_TX_SOFTWARE capability was missing and only SOF_TIMESTAMPING_RX_SOFTWARE was announced. By using ethtool_ops bcmgenet_ethtool_ops() as get_ts_info(), the SOF_TIMESTAMPING_TX_SOFTWARE capability is announced. Similar to commit a8f5cb9e7991 ("smsc95xx: use ethtool_op_get_ts_info()") Signed-off-by: Ryan M. Collins Acked-by: Florian Fainelli Acked-by: Doug Berger Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index d3a0b614dbfa..b22196880d6d 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -1124,6 +1124,7 @@ static const struct ethtool_ops bcmgenet_ethtool_ops = { .set_coalesce = bcmgenet_set_coalesce, .get_link_ksettings = bcmgenet_get_link_ksettings, .set_link_ksettings = bcmgenet_set_link_ksettings, + .get_ts_info = ethtool_op_get_ts_info, }; /* Power down the unimac, based on mode. */ -- cgit v1.2.3 From dd7078f05e1b774a9e8c9f117101d97e4ccd0691 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Fri, 30 Aug 2019 22:23:12 +0200 Subject: enetc: Add missing call to 'pci_free_irq_vectors()' in probe and remove functions Call to 'pci_free_irq_vectors()' are missing both in the error handling path of the probe function, and in the remove function. Add them. Fixes: 19971f5ea0ab ("enetc: add PTP clock driver") Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/enetc/enetc_ptp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ptp.c b/drivers/net/ethernet/freescale/enetc/enetc_ptp.c index 2fd2586e42bf..bc594892507a 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_ptp.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_ptp.c @@ -82,7 +82,7 @@ static int enetc_ptp_probe(struct pci_dev *pdev, n = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSIX); if (n != 1) { err = -EPERM; - goto err_irq; + goto err_irq_vectors; } ptp_qoriq->irq = pci_irq_vector(pdev, 0); @@ -107,6 +107,8 @@ static int enetc_ptp_probe(struct pci_dev *pdev, err_no_clock: free_irq(ptp_qoriq->irq, ptp_qoriq); err_irq: + pci_free_irq_vectors(pdev); +err_irq_vectors: iounmap(base); err_ioremap: kfree(ptp_qoriq); @@ -125,6 +127,7 @@ static void enetc_ptp_remove(struct pci_dev *pdev) enetc_phc_index = -1; ptp_qoriq_free(ptp_qoriq); + pci_free_irq_vectors(pdev); kfree(ptp_qoriq); pci_release_mem_regions(pdev); -- cgit v1.2.3 From e1e54ec7fb55501c33b117c111cb0a045b8eded2 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 31 Aug 2019 09:17:51 +0200 Subject: net: seeq: Fix the function used to release some memory in an error handling path In commit 99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv"), a call to 'get_zeroed_page()' has been turned into a call to 'dma_alloc_coherent()'. Only the remove function has been updated to turn the corresponding 'free_page()' into 'dma_free_attrs()'. The error hndling path of the probe function has not been updated. Fix it now. Rename the corresponding label to something more in line. Fixes: 99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv") Signed-off-by: Christophe JAILLET Reviewed-by: Thomas Bogendoerfer Signed-off-by: David S. Miller --- drivers/net/ethernet/seeq/sgiseeq.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/seeq/sgiseeq.c b/drivers/net/ethernet/seeq/sgiseeq.c index 7a5e6c5abb57..276c7cae7cee 100644 --- a/drivers/net/ethernet/seeq/sgiseeq.c +++ b/drivers/net/ethernet/seeq/sgiseeq.c @@ -794,15 +794,16 @@ static int sgiseeq_probe(struct platform_device *pdev) printk(KERN_ERR "Sgiseeq: Cannot register net device, " "aborting.\n"); err = -ENODEV; - goto err_out_free_page; + goto err_out_free_attrs; } printk(KERN_INFO "%s: %s %pM\n", dev->name, sgiseeqstr, dev->dev_addr); return 0; -err_out_free_page: - free_page((unsigned long) sp->srings); +err_out_free_attrs: + dma_free_attrs(&pdev->dev, sizeof(*sp->srings), sp->srings, + sp->srings_dma, DMA_ATTR_NON_CONSISTENT); err_out_free_dev: free_netdev(dev); -- cgit v1.2.3 From 089cf7f6ecb266b6a4164919a2e69bd2f938374a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 2 Sep 2019 09:57:40 -0700 Subject: Linux 5.3-rc7 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index f125625efd60..0cbe8717bdb3 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 3 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Bobtail Squid # *DOCUMENTATION* -- cgit v1.2.3