From a9b0623357d2faa49a0f862154ba36c42c4bad2b Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 2 Sep 2008 10:19:29 +0200 Subject: pcm037: add rts/cts support for serial port We have rts/cts pins on the first serial port on the pcm037. Enable it. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/pcm037.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index 0a152ed15a85..df8582a6231b 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -54,7 +54,7 @@ static struct platform_device pcm037_flash = { }; static struct imxuart_platform_data uart_pdata = { - .flags = 0, + .flags = IMXUART_HAVE_RTSCTS, }; static struct platform_device *devices[] __initdata = { -- cgit v1.2.3 From c45e7d7be891fe94e13d0e7aeee3e0e4ee7118f4 Mon Sep 17 00:00:00 2001 From: Darius Augulis Date: Tue, 2 Sep 2008 10:19:29 +0200 Subject: i.MX serial: fix init failure Adds extra "out" label to probe function after calling .init form platform data. Because .init can return error number caused by gpio request fail. Signed-off-by: Darius Augulis Signed-off-by: Sascha Hauer --- drivers/serial/imx.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 6a29f9330a73..20189c447e92 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1133,13 +1133,19 @@ static int serial_imx_probe(struct platform_device *pdev) if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) sport->have_rtscts = 1; - if (pdata->init) - pdata->init(pdev); + if (pdata->init) { + ret = pdata->init(pdev); + if (ret) + goto clkput; + } uart_add_one_port(&imx_reg, &sport->port); platform_set_drvdata(pdev, &sport->port); return 0; +clkput: + clk_put(sport->clk); + clk_disable(sport->clk); unmap: iounmap(sport->port.membase); free: -- cgit v1.2.3 From 4411805b13d4b8c31870b276c2730d585b062db7 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 28 Jul 2008 12:10:34 +0200 Subject: imx serial: set RXD mux bit on i.MX27 and i.MX31 RX in i.MX27 and i.MX31 UART lines does not work unless the "RXD Muxed Input Select" bit is set on i.MX27 and i.MX31 processors. This patch sets the missing RXD mux bit in the UCR3 register. Signed-off-by: Marc Kleine-Budde Signed-off-by: Sascha Hauer --- drivers/serial/imx.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 20189c447e92..312653e2f715 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -127,8 +127,13 @@ #define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ #define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ #define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ -#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */ -#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */ +#ifdef CONFIG_ARCH_IMX +#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */ +#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */ +#endif +#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3 +#define UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */ +#endif #define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ #define UCR3_BPEN (1<<0) /* Preset registers enable */ #define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */ @@ -598,6 +603,12 @@ static int imx_startup(struct uart_port *port) temp |= (UCR2_RXEN | UCR2_TXEN); writel(temp, sport->port.membase + UCR2); +#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3 + temp = readl(sport->port.membase + UCR3); + temp |= UCR3_RXDMUXSEL; + writel(temp, sport->port.membase + UCR3); +#endif + /* * Enable modem status interrupts */ -- cgit v1.2.3 From 9fbe604456c5ae21768f1c98379e1b81c72adcd3 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 28 Jul 2008 21:26:01 +0200 Subject: imx serial: fix rts handling for non imx1 based hardware The interrupt handler for muxed interrupts (imx2/imx3) was calling the rts handling subroutine if the RTSS bit was set. (Which indicates the status of the RTS line), leading to an interrupt flood on RTS bit low. This patch fixes the problem by looking at the RTSD bit instead, indicating a change in the RTS line. Signed-off-by: Marc Kleine-Budde Signed-off-by: Sascha Hauer --- drivers/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 312653e2f715..3f90f1bbbbcd 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -450,7 +450,7 @@ static irqreturn_t imx_int(int irq, void *dev_id) readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN) imx_txint(irq, dev_id); - if (sts & USR1_RTSS) + if (sts & USR1_RTSD) imx_rtsint(irq, dev_id); return IRQ_HANDLED; -- cgit v1.2.3 From 7736c09c6cf9521f2413d78856a66f4a37046e84 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 9 Sep 2008 10:16:22 +0100 Subject: [ARM] OMAP: Fix MMC device data OMAPs MMC device data was passing the wrong structure via the platform device. Moreover, a missing function means that both sx1_defconfig and omap_h2_1610_defconfig builds failed with undefined reference to `omap_set_mmc_info' errors. Fix this by updating the MMC support from the omapzoom tree. Signed-off-by: Russell King --- arch/arm/plat-omap/devices.c | 123 ++++++++++++++++++++++++++++++++----------- 1 file changed, 91 insertions(+), 32 deletions(-) diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 187e3d8bfdfe..bc1cf30c83e0 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -21,6 +21,7 @@ #include #include +#include #include #include #include @@ -194,25 +195,38 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ + defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define OMAP_MMC1_BASE 0x4809c000 -#define OMAP_MMC1_INT INT_24XX_MMC_IRQ +#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x1fc) +#define OMAP_MMC1_INT INT_24XX_MMC_IRQ + +#define OMAP_MMC2_BASE 0x480b4000 +#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x1fc) +#define OMAP_MMC2_INT INT_24XX_MMC2_IRQ + #else + #define OMAP_MMC1_BASE 0xfffb7800 +#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x7f) #define OMAP_MMC1_INT INT_MMC -#endif + #define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */ +#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x7f) +#define OMAP_MMC2_INT INT_1610_MMC2 -static struct omap_mmc_conf mmc1_conf; +#endif + +static struct omap_mmc_platform_data mmc1_data; static u64 mmc1_dmamask = 0xffffffff; static struct resource mmc1_resources[] = { { .start = OMAP_MMC1_BASE, - .end = OMAP_MMC1_BASE + 0x7f, + .end = OMAP_MMC1_END, .flags = IORESOURCE_MEM, }, { @@ -226,26 +240,27 @@ static struct platform_device mmc_omap_device1 = { .id = 1, .dev = { .dma_mask = &mmc1_dmamask, - .platform_data = &mmc1_conf, + .platform_data = &mmc1_data, }, .num_resources = ARRAY_SIZE(mmc1_resources), .resource = mmc1_resources, }; -#ifdef CONFIG_ARCH_OMAP16XX +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \ + defined(CONFIG_ARCH_OMAP34XX) -static struct omap_mmc_conf mmc2_conf; +static struct omap_mmc_platform_data mmc2_data; static u64 mmc2_dmamask = 0xffffffff; static struct resource mmc2_resources[] = { { .start = OMAP_MMC2_BASE, - .end = OMAP_MMC2_BASE + 0x7f, + .end = OMAP_MMC2_END, .flags = IORESOURCE_MEM, }, { - .start = INT_1610_MMC2, + .start = OMAP_MMC2_INT, .flags = IORESOURCE_IRQ, }, }; @@ -255,26 +270,19 @@ static struct platform_device mmc_omap_device2 = { .id = 2, .dev = { .dma_mask = &mmc2_dmamask, - .platform_data = &mmc2_conf, + .platform_data = &mmc2_data, }, .num_resources = ARRAY_SIZE(mmc2_resources), .resource = mmc2_resources, }; #endif -static void __init omap_init_mmc(void) +static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf) { - const struct omap_mmc_config *mmc_conf; - const struct omap_mmc_conf *mmc; - - /* NOTE: assumes MMC was never (wrongly) enabled */ - mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config); - if (!mmc_conf) + if (cpu_is_omap2430() || cpu_is_omap34xx()) return; - /* block 1 is always available and has just one pinout option */ - mmc = &mmc_conf->mmc[0]; - if (mmc->enabled) { + if (mmc_conf->mmc[0].enabled) { if (cpu_is_omap24xx()) { omap_cfg_reg(H18_24XX_MMC_CMD); omap_cfg_reg(H15_24XX_MMC_CLKI); @@ -292,7 +300,7 @@ static void __init omap_init_mmc(void) omap_cfg_reg(P20_1710_MMC_DATDIR0); } } - if (mmc->wire4) { + if (mmc_conf->mmc[0].wire4) { if (cpu_is_omap24xx()) { omap_cfg_reg(H14_24XX_MMC_DAT1); omap_cfg_reg(E19_24XX_MMC_DAT2); @@ -303,25 +311,35 @@ static void __init omap_init_mmc(void) } else { omap_cfg_reg(MMC_DAT1); /* NOTE: DAT2 can be on W10 (here) or M15 */ - if (!mmc->nomux) + if (!mmc_conf->mmc[0].nomux) omap_cfg_reg(MMC_DAT2); omap_cfg_reg(MMC_DAT3); } } - mmc1_conf = *mmc; - (void) platform_device_register(&mmc_omap_device1); +#if defined(CONFIG_ARCH_OMAP2420) + if (mmc_conf->mmc[0].internal_clock) { + /* + * Use internal loop-back in MMC/SDIO + * Module Input Clock selection + */ + if (cpu_is_omap24xx()) { + u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + v |= (1 << 24); /* not used in 243x */ + omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); + } + } +#endif } #ifdef CONFIG_ARCH_OMAP16XX /* block 2 is on newer chips, and has many pinout options */ - mmc = &mmc_conf->mmc[1]; - if (mmc->enabled) { - if (!mmc->nomux) { + if (mmc_conf->mmc[1].enabled) { + if (!mmc_conf->mmc[1].nomux) { omap_cfg_reg(Y8_1610_MMC2_CMD); omap_cfg_reg(Y10_1610_MMC2_CLK); omap_cfg_reg(R18_1610_MMC2_CLKIN); omap_cfg_reg(W8_1610_MMC2_DAT0); - if (mmc->wire4) { + if (mmc_conf->mmc[1].wire4) { omap_cfg_reg(V8_1610_MMC2_DAT1); omap_cfg_reg(W15_1610_MMC2_DAT2); omap_cfg_reg(R10_1610_MMC2_DAT3); @@ -337,14 +355,55 @@ static void __init omap_init_mmc(void) if (cpu_is_omap1710()) omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24), MOD_CONF_CTRL_1); - mmc2_conf = *mmc; + } +#endif +} + +static void __init omap_init_mmc(void) +{ + const struct omap_mmc_config *mmc_conf; + + /* NOTE: assumes MMC was never (wrongly) enabled */ + mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config); + if (!mmc_conf) + return; + + omap_init_mmc_conf(mmc_conf); + + if (mmc_conf->mmc[0].enabled) { + mmc1_data.conf = mmc_conf->mmc[0]; + (void) platform_device_register(&mmc_omap_device1); + } + +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \ + defined(CONFIG_ARCH_OMAP34XX) + if (mmc_conf->mmc[1].enabled) { + mmc2_data.conf = mmc_conf->mmc[1]; (void) platform_device_register(&mmc_omap_device2); } #endif - return; } + +void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) +{ + switch (host) { + case 1: + mmc1_data = *info; + break; +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \ + defined(CONFIG_ARCH_OMAP34XX) + case 2: + mmc2_data = *info; + break; +#endif + default: + BUG(); + } +} + #else static inline void omap_init_mmc(void) {} +void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {} #endif /*-------------------------------------------------------------------------*/ -- cgit v1.2.3 From 632480ea6548ae66e89a49ef037fd593c7a52418 Mon Sep 17 00:00:00 2001 From: Jürgen Schindele Date: Mon, 8 Sep 2008 22:06:29 +0100 Subject: [ARM] 5245/1: Fix warning about unused return value in drivers/pcmcia Fix warning when compiling "drivers/pcmcia/soc-common.c" The return value of the function "device_create_file" was not used / assigned. Signed-off-by: Jrgen Schindele Signed-off-by: Russell King --- drivers/pcmcia/soc_common.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index c48f3f69bdaf..da3972153226 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -748,7 +748,9 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops add_timer(&skt->poll_timer); - device_create_file(&skt->socket.dev, &dev_attr_status); + ret = device_create_file(&skt->socket.dev, &dev_attr_status); + if (ret) + goto out_err_8; } dev_set_drvdata(dev, sinfo); @@ -758,6 +760,8 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops do { skt = &sinfo->skt[i]; + device_remove_file(&skt->socket.dev, &dev_attr_status); + out_err_8: del_timer_sync(&skt->poll_timer); pcmcia_unregister_socket(&skt->socket); -- cgit v1.2.3 From 7bdb22c9d4b4f526b81770cd719d2f5dddf0373d Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 10 Sep 2008 10:30:37 +0100 Subject: [ARM] 5246/1: tosa: add proper clock alias for tc6393xb clock Add clock alias for clock that is used by tc6393xb device on tosa. As that chip plays pretty major part in tosa life and is currently disabled, this is 2.4.27 material. Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King --- arch/arm/mach-pxa/tosa.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 5dab30eafddc..33da99fa1ccf 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -50,6 +50,7 @@ #include #include "generic.h" +#include "clock.h" #include "devices.h" static unsigned long tosa_pin_config[] = { @@ -792,6 +793,8 @@ static void __init tosa_init(void) pxa_set_i2c_info(NULL); platform_scoop_config = &tosa_pcmcia_config; + clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL); + platform_add_devices(devices, ARRAY_SIZE(devices)); } -- cgit v1.2.3 From c33de47bce74e0c890f9f830a7641371524edbc1 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 11 Sep 2008 01:28:51 +0100 Subject: [ARM] 5247/1: tosa: SW_EAR_IN support Signed-off-by: Dmitry Baryshkov Acked-by: Eric Miao Signed-off-by: Russell King --- arch/arm/mach-pxa/tosa.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 33da99fa1ccf..9f3ef9eb32e3 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -522,6 +522,14 @@ static struct gpio_keys_button tosa_gpio_keys[] = { .wakeup = 1, .active_low = 1, }, + { + .type = EV_SW, + .code = SW_HEADPHONE_INSERT, + .gpio = TOSA_GPIO_EAR_IN, + .desc = "HeadPhone insert", + .active_low = 1, + .debounce_interval = 300, + }, }; static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = { -- cgit v1.2.3 From 88c381bf09d7b3f2c2e8749150087aff2c434be4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 13 Sep 2008 21:23:06 +0100 Subject: [ARM] Fix PCI_DMA_BUS_IS_PHYS for ARM PCI_DMA_BUS_IS_PHYS was defined to be zero, which meant we ignored the DMA mask for IDE and SCSI transfers. This is wrong - we have no DMA translation hardware. We want to obey DMA masks so that the block layer performs bouncing itself. Reported-by: Mikael Pettersson Signed-off-by: Russell King --- arch/arm/include/asm/pci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 721c03d53f4b..918d0cbbf064 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -30,7 +30,7 @@ static inline void pcibios_penalize_isa_irq(int irq, int active) * The networking and block device layers use this boolean for bounce * buffer decisions. */ -#define PCI_DMA_BUS_IS_PHYS (0) +#define PCI_DMA_BUS_IS_PHYS (1) /* * Whether pci_unmap_{single,page} is a nop depends upon the -- cgit v1.2.3