From 656c1a65ab555ee5c7cd0d6aee8ab82ca3c1795f Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Fri, 28 Sep 2018 17:54:00 +0200 Subject: ARM: dts: omap5: enable OTG role for DWC3 controller Since SMPS10 and OTG cable detection extcon are described here, and work to enable OTG power when an OTG cable is plugged in, we can define OTG mode in the controller (which is disabled by default in omap5.dtsi). Tested on OMAP5EVM and Pyra. Suggested-by: Roger Quadros Signed-off-by: H. Nikolaus Schaller Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-board-common.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index ab6f640b282b..bf7ca00f4c21 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -700,6 +700,10 @@ vbus-supply = <&smps10_out1_reg>; }; +&dwc3 { + dr_mode = "otg"; +}; + &mcspi1 { }; -- cgit v1.2.3