From 60f5f5d3a106dc5385b39348d13b20b15ac9cbf9 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Tue, 19 Apr 2016 15:34:22 +0200 Subject: at86rf230: increase sleep to off timings I expierenced when setting channel while sleep mode it didn't changed the channel inside the hardware registers. Then I got another report of an user which has similar issues. I increased the sleep to off state change timing, which is according at86rf233 at maximum 1000 us. After this change I got no similar effects again. I tried another option to wait on AWAKE_END irq, which can be used to wait until the transceiver is awaked. I tested it and the IRQ took 4 seconds after starting state change. I don't believe it takes 4 seconds to go into the TRX_OFF state from SLEEP state. The alternative is to increase the timings which seems to work. Cc: Oleg Hahm Signed-off-by: Alexander Aring Reviewed-by: Stefan Schmidt Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index cb9e9fe6d77a..9f10da60e02d 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -1340,7 +1340,7 @@ static struct at86rf2xx_chip_data at86rf233_data = { .t_off_to_aack = 80, .t_off_to_tx_on = 80, .t_off_to_sleep = 35, - .t_sleep_to_off = 210, + .t_sleep_to_off = 1000, .t_frame = 4096, .t_p_ack = 545, .rssi_base_val = -91, @@ -1355,7 +1355,7 @@ static struct at86rf2xx_chip_data at86rf231_data = { .t_off_to_aack = 110, .t_off_to_tx_on = 110, .t_off_to_sleep = 35, - .t_sleep_to_off = 380, + .t_sleep_to_off = 1000, .t_frame = 4096, .t_p_ack = 545, .rssi_base_val = -91, @@ -1370,7 +1370,7 @@ static struct at86rf2xx_chip_data at86rf212_data = { .t_off_to_aack = 200, .t_off_to_tx_on = 200, .t_off_to_sleep = 35, - .t_sleep_to_off = 380, + .t_sleep_to_off = 1000, .t_frame = 4096, .t_p_ack = 545, .rssi_base_val = -100, -- cgit v1.2.3